| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
# Conflicts:
# drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
# drivers/gpu/drm/i915/display/intel_dmc.c
|
|
In probe() we create the drm_device, and then register the MHI controller.
In remove(), we should unregister the controller first, then remove the
drm_device. Update the remove() operations to match.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-8-quic_jhugo@quicinc.com
|
|
Offload the balancing of init and destroy calls to DRM managed APIs.
mutex destroy for ->cntl_mutex is not called during device release and
destroy workqueue is not called in error path of create_qdev(). So, use
DRM managed APIs to manage the release of resources and avoid such
problems.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-7-quic_jhugo@quicinc.com
|
|
This function may copy the pad0 field of struct hl_info_sec_attest to user
mode which has not been initialized, resulting in leakage of kernel heap
data to user mode. To prevent this, use kzalloc() to allocate and zero out
the buffer, which can also eliminate other uninitialized holes, if any.
Fixes: 0c88760f8f5e ("habanalabs/gaudi2: add secured attestation info uapi")
Signed-off-by: Xingyuan Mo <hdthky0@gmail.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Part of the undefined opcode data is updated in
gaudi2_handle_qman_err_generic() and some in
handle_lower_qman_data_on_err().
However, the 'write_enable' flag is checked only in
gaudi2_handle_qman_err_generic(), and information of more than a single
error can be mixed there.
Moreover, handle_lower_qman_data_on_err() is called only for the lower
QMAN, so for an error in the upper QMAN there is only a partial info.
Move all the data update to be done in a single place, protected by the
'write_enable' flag.
As mainly the lower QMAN's info is interesting, avoid saving the partial
info for the upper QMAN.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The device debugfs directory was modified to be named as the
device-name.
This name is the parent device name, i.e. either the PCI address in case
of an ASIC, or the simulator device name in case of a simulator.
This change makes it more difficult for a user to access the debugfs
directory for a specific accel device, because he can't just use the
accel minor id, but he needs to do more device-dependent operations to
get the device name.
To make it easier to get this name, add a 'parent_device' sysfs
attribute that the user can read using the minor id before accessing
debugfs.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
QM instructions are in multiples of 64 bits and the command type is in
the upper bits of first QWORD.
To make it clearer that an undefined command is due to a type of 0x0,
always print all 64 bits and add a zero padding if needed.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Infineon controller second stage has 3 instances that their version
need to be reported by driver.
Signed-off-by: Ariel Suller <asuller@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
User will provide a nonce via the INFO ioctl, and will retrieve
the signed device info generated using given nonce.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The QM CQ PTR_LO/PTR_HI/TSIZE registers are for pushing a CQ entry, and
although they are updated by HW even when descriptors are fetched by PQ
and CB addresses are fed into CQ, the correct registers to use when
dumping the CQ info are the ones with the _STS suffix.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Module ID exposes the physical location of the device in the server,
from the pov of the devices in regard to how they are connected by
internal fabric.
This information is already exposed in our INFO ioctl, but there are
utilities and scripts running in data-center which are already
accessing sysfs for topology information and it is easier for them
to continue getting that information from sysfs instead of opening
a file descriptor.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Failure to map is considered a non-trivial error and we need to notify
the user about it.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Upon a QM error, the address/size from both the CQ and the ARC_CQ are
printed, although the instruction that led to the error was received
from only one of them.
Moreover, in case of a QM undefined opcode, only one of these
address/size sets will be captured based on the value of ARC_CQ_PTR.
However, this value can be non-zero even if currently the CQ is used, in
case the CQ/ARC_CQ are alternately used.
Under the assumption of having a stop-on-error configuration, modify to
use CP_STS.CUR_CQ field to get the relevant CQ for the QM error.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
hl_device_cond_reset() might be called with the hard reset flag unset,
because a compute reset upon device release as part of a graceful reset
is valid.
If the conditions for graceful reset are not met, hl_device_reset() will
be called for an immediate reset. In this case a compute reset is not
valid, so it will be replaced with a hard reset together with a debug
message about it.
This message might be confusing, as it implies that a compute reset was
requested when it shouldn't. To prevent this confusion, set the hard
reset flag in hl_device_cond_reset() if going to an immediate reset.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The print was added long back for a specific debug and can
now be removed.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
currently the undefined opcode event bit in set only for lower cp and
only if 'write_enable' is true. It should be set anyway and for all
streams in order to report that event to userspace.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Stop rescheduling another heartbeat check when EQ heartbeat check fails
as it generates confusing logs in dmesg that the heartbeat fails.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Gaudi2 with PCI revision ID with the value of '3' represents Gaudi2C
device and should be detected and initialized as Gaudi2.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Add error log when no eq event is received from FW,
to cover a scenario when FW is stuck for some reason.
In such case driver will not receive neither the eq error interrupt
or the eq heartbeat event, and will just initiate a reset without
indication in the dmesg about the reason.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
When a PCIe AXI drain event happens, it is possible that the driver
cannot access the device through PCIe, and therefore cannot send a
hard-reset request to FW.
Starting from FW version 1.13, FW will initiate a hard-reset in such
a case without waiting for a reset request from the driver.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Use a predefined mask which set the device critical boot errors.
Driver will fail and stop its loading, only upon detecting at least
one of those errors defined in this mask.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
When working on a bare-metal system, if FLR will happen the firmware
will handle it and driver will have no knowledge of it, and this will
cause two issues:
1.The driver will be in operational state while it should be in reset.
This will cause the heartbeat mechanism to keep sending messages to FW
while pci device is in reset. Eventually heartbeat will fail and
the device will end up in non-operational state.
2. After FW handles the FLR, and due to the reset it'll go back to
preboot stage, and driver need to perform hard reset in order to
load the boot fit binary.
This patch will add reset_prepare hook that will set the device to
be in disabled state, so it'll be not operational, and also
reset_done hook which will be called after the actual FLR handling,
then it will perform hard reset.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Every time QAIC_MMAP_BO ioctl is called for a BO,
drm_gem_create_mmap_offset() is called. Calling
drm_gem_create_mmap_offset() more then once for a BO seems redundant.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-6-quic_jhugo@quicinc.com
|
|
Do not free BO explicitly in error path, just drop its reference, cleanup
will be taken care by DRM as we have registered for ->free() callback.
This patch makes sure that there is only one code path for BO to be freed.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-5-quic_jhugo@quicinc.com
|
|
The timesync channels have their struct fields out of order with the rest
of the channels. Fix them so there is a consistent style in the file.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-4-quic_jhugo@quicinc.com
|
|
->queued field is used to track whether the BO is submitted to hardware for
DMA or not. Since same information can be retrieved using ->xfer_list field
of same structure remove ->queued as it is redundant.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-3-quic_jhugo@quicinc.com
|
|
->size in struct qaic_attach_slice_hdr is redundant since we have BO handle
and its size can be retrieved from base BO structure.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-2-quic_jhugo@quicinc.com
|
|
The SOC_HW_VERSION register in the BHI space is not correctly initialized
by the device and in many cases contains uninitialized data. The register
could contain 0xFFFFFFFF which is a special value to indicate a link
error in PCIe, therefore if observed, we could incorrectly think the
device is down.
Intercept reads for this register, and provide the correct value - every
production instance would read 0x60110200 if the device was operating as
intended.
Fixes: a36bf7af868b ("accel/qaic: Add MHI controller")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163101.1295769-3-quic_jhugo@quicinc.com
|
|
Do not modify the size of dmabuf as it is immutable.
Fixes: ff13be830333 ("accel/qaic: Add datapath")
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163101.1295769-2-quic_jhugo@quicinc.com
|
|
Using PCI Device ID/Revision to initialize the interrupt_clear_with_0
workaround is problematic - there are many pre-production
steppings with different behavior, even with the same PCI ID/Revision
Instead of checking for PCI Device ID/Revision, check the VPU
buttress interrupt status register behavior - if this register
is not zero after writing 1s it means there register is RW
instead of RW1C and we need to enable the interrupt_clear_with_0
workaround.
Fixes: 7f34e01f77f8 ("accel/ivpu: Clear specific interrupt status bits on C0")
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/all/20231204122331.40560-1-jacek.lawrynowicz@linux.intel.com
|
|
One of the source files includes <drm/drm_auth.h> via <drm/drm_legacy.h>,
which will be removed. Include drm_auth.h directly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-6-tzimmermann@suse.de
|
|
Currently the QAIC DRM device registers itself when the MHI QAIC_CONTROL
channel becomes available. This is when the device is able to process
workloads. However, the DRM driver also provides the debugfs interface
bootlog for the device. If the device fails to boot to the QSM (which
brings up the MHI QAIC_CONTROL channel), the bootlog won't be available for
debugging why it failed to boot.
Change when the DRM device registers itself from when QAIC_CONTROL is
available to when the card is first probed on the PCI bus. Additionally,
make the DRM driver persist through reset/error cases so the driver
doesn't have to be reloaded to access the card again. Send
KOBJ_ONLINE/OFFLINE uevents so userspace can know when DRM device is
ready to handle requests.
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231117174337.20174-3-quic_jhugo@quicinc.com
|
|
'in_reset' holds the state of the device. As part of bringup, the device
needs to be queried to check if it's in a valid state. Add a new state
that indicates that the device is coming up, but not ready for users
yet. Rename to 'dev_state' to better describe the variable.
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231117174337.20174-2-quic_jhugo@quicinc.com
|
|
Thomas Zimermann needs 8d6ef26501 ("drm/ast: Disconnect BMC if
physical connector is connected") for further ast work in -next.
Minor conflicts in ivpu between 3de6d9597892 ("accel/ivpu: Pass D0i3
residency time to the VPU firmware") and 3f7c0634926d
("accel/ivpu/37xx: Fix hangs related to MMIO reset") changing adjacent
lines.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
There is no need to call MMIO reset using VPU_37XX_BUTTRESS_VPU_IP_RESET
register. IP will be reset by FLR or by entering d0i3. Also IP reset
during power_up is not needed as the VPU is already in reset.
Removing MMIO reset improves stability as it a partial device reset
that is not safe in some corner cases.
This change also brings back ivpu_boot_pwr_domain_disable() that
helps to properly power down VPU when it is hung by a buggy workload.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Fixes: 828d63042aec ("accel/ivpu: Don't enter d0i3 during FLR")
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115111004.1304092-1-jacek.lawrynowicz@linux.intel.com
|
|
MAX_ORDER was redefined so that valid allocations to the page allocator
are in the range of 0..MAX_ORDER, inclusive in the commit
23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely").
We are treating MAX_ORDER as an exclusive value, and thus could be
requesting larger allocations. Update our use to match the redefinition
of MAX_ORDER.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103153302.20642-1-quic_jhugo@quicinc.com
|
|
Remove job_done thread and replace it with generic callback based
mechanism.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231113170252.758137-6-jacek.lawrynowicz@linux.intel.com
|
|
Change to use work for timeout detection. Needed for thread_irq
conversion.
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231113170252.758137-5-jacek.lawrynowicz@linux.intel.com
|
|
This allow to simplify ivpu_ipc_receive() as now we do not have
to process all messages in aborted state - they will be freed in
ivpu_ipc_consumer_del().
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231113170252.758137-4-jacek.lawrynowicz@linux.intel.com
|
|
ivpu_ipc_dispatch is always called with irqs disabled. Add lockdep
assertion and remove unneeded _irqsave/_irqrestore.
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231113170252.758137-3-jacek.lawrynowicz@linux.intel.com
|
|
Now the cons->rx_msg_lock also protects 'abort' field so rename the lock.
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231113170252.758137-2-jacek.lawrynowicz@linux.intel.com
|
|
The usage count of struct dev_pm_info is an implementation detail that
is only available if CONFIG_PM is enabled, so printing it in a debug message
causes a build failure in configurations without PM:
In file included from include/linux/device.h:15,
from include/linux/pci.h:37,
from drivers/accel/ivpu/ivpu_pm.c:8:
drivers/accel/ivpu/ivpu_pm.c: In function 'ivpu_rpm_get_if_active':
drivers/accel/ivpu/ivpu_pm.c:254:51: error: 'struct dev_pm_info' has no member named 'usage_count'
254 | atomic_read(&vdev->drm.dev->power.usage_count));
| ^
include/linux/dev_printk.h:129:48: note: in definition of macro 'dev_printk'
129 | _dev_printk(level, dev, fmt, ##__VA_ARGS__); \
| ^~~~~~~~~~~
drivers/accel/ivpu/ivpu_drv.h:75:17: note: in expansion of macro 'dev_dbg'
75 | dev_dbg((vdev)->drm.dev, "[%s] " fmt, #type, ##args); \
| ^~~~~~~
drivers/accel/ivpu/ivpu_pm.c:253:9: note: in expansion of macro 'ivpu_dbg'
253 | ivpu_dbg(vdev, RPM, "rpm_get_if_active count %d\n",
| ^~~~~~~~
The print message does not seem essential, so the easiest workaround is
to just remove it.
Fixes: c39dc15191c4 ("accel/ivpu: Read clock rate only if device is up")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027152633.528490-1-arnd@kernel.org
(cherry picked from commit 1470acbef122c7e2e588f6346ce459c26d0568a2)
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
|
|
Let's kickstart the v6.8 release cycle.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Use struct drm_gem_shmem_object as a base for struct ivpu_bo.
This cuts by 50% the buffer management code.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231031073156.1301669-5-stanislaw.gruszka@linux.intel.com
|
|
Usages of DRM_IVPU_BO_UNCACHED should be replaced by DRM_IVPU_BO_WC.
There is no functional benefit from DRM_IVPU_BO_UNCACHED if these
buffers are never mapped to host VM.
This allows to cut the buffer handling code in the kernel driver
by half.
Usage of DRM_IVPU_BO_UNCACHED buffers was removed from user-space
driver and will not be part of first UMD release.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231031073156.1301669-4-stanislaw.gruszka@linux.intel.com
|
|
ivpu_bo_remove_all_bos_from_context() could race with ivpu_bo_free()
when prime buffer was closed after vpu device was closed.
Move the bo_list from context to vdev and use a dedicated lock to
sync it. This list is not modified when BO is added/removed from
a context.
Also rename ivpu_bo_free_vpu_addr() to ivpu_bo_unbind() because this
function does more then just free vpu_addr.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231031073156.1301669-3-stanislaw.gruszka@linux.intel.com
|
|
Use gem->open() callback to simplify the code and prepare for gem_shmem
conversion. It is called during handle creation for a gem object,
during prime import and in BO_CREATE ioctl. Hence can be used for vpu_addr
allocation. On the way remove unused bo->user_ptr field.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231031073156.1301669-2-stanislaw.gruszka@linux.intel.com
|
|
Use pm_runtime_status_suspended() instead of dev->power.runtime_status
field that is not available without PM.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/all/20231106130827.1600948-1-jacek.lawrynowicz@linux.intel.com
|
|
Add support to partially execute a slice which is resized to zero.
Executing a zero size slice in a BO should mean that there is no DMA
transfers involved but you should still configure doorbell and semaphores.
For example consider a BO of size 18K and it is sliced into 3 6K slices
and user calls partial execute ioctl with resize as 10K.
slice 0 - size is 6k and offset is 0, so resize of 10K will not cut short
this slice hence we send the entire slice for execution.
slice 1 - size is 6k and offset is 6k, so resize of 10K will cut short this
slice and only the first 4k should be DMA along with configuring
doorbell and semaphores.
slice 2 - size is 6k and offset is 12k, so resize of 10k will cut short
this slice and no DMA transfer would be involved but we should
would configure doorbell and semaphores.
This change begs to change the behavior of 0 resize. Currently, 0 resize
partial execute ioctl behaves exactly like execute ioctl i.e. no resize.
After this patch all the slice in BO should behave exactly like slice 2 in
above example.
Refactor copy_partial_exec_reqs() to make it more readable and less
complex.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027164330.11978-1-quic_jhugo@quicinc.com
|
