| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Since commit adad556efcdd ("crypto: api - Fix built-in testing
dependency failures"), the following warning appears when booting an
x86_64 kernel that is configured with
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y and CONFIG_CRYPTO_AES_NI_INTEL=y,
even when CONFIG_CRYPTO_XTS=y and CONFIG_CRYPTO_AES=y:
alg: skcipher: skipping comparison tests for xts-aes-aesni because xts(ecb(aes-generic)) is unavailable
This is caused by an issue in the xts template where it allocates an
"aes" single-block cipher without declaring a dependency on it via the
crypto_spawn mechanism. This issue was exposed by the above commit
because it reversed the order that the algorithms are tested in.
Specifically, when "xts(ecb(aes-generic))" is instantiated and tested
during the comparison tests for "xts-aes-aesni", the "xts" template
allocates an "aes" crypto_cipher for encrypting tweaks. This resolves
to "aes-aesni". (Getting "aes-aesni" instead of "aes-generic" here is a
bit weird, but it's apparently intended.) Due to the above-mentioned
commit, the testing of "aes-aesni", and the finalization of its
registration, now happens at this point instead of before. At the end
of that, crypto_remove_spawns() unregisters all algorithm instances that
depend on a lower-priority "aes" implementation such as "aes-generic"
but that do not depend on "aes-aesni". However, because "xts" does not
use the crypto_spawn mechanism for its "aes", its dependency on
"aes-aesni" is not recognized by crypto_remove_spawns(). Thus,
crypto_remove_spawns() unexpectedly unregisters "xts(ecb(aes-generic))".
Fix this issue by making the "xts" template use the crypto_spawn
mechanism for its "aes" dependency, like what other templates do.
Note, this fix could be applied as far back as commit f1c131b45410
("crypto: xts - Convert to skcipher"). However, the issue only got
exposed by the much more recent changes to how the crypto API runs the
self-tests, so there should be no need to backport this to very old
kernels. Also, an alternative fix would be to flip the list iteration
order in crypto_start_tests() to restore the original testing order.
I'm thinking we should do that too, since the original order seems more
natural, but it shouldn't be relied on for correctness.
Fixes: adad556efcdd ("crypto: api - Fix built-in testing dependency failures")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As skcipher spawns may be of the type lskcipher, only the common
fields may be accessed. This was already the case but use the
correct helpers to make this more obvious.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
Direct replacement is safe here since return value of -errno
is used to check for truncation instead of sizeof(dest).
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch does the final flag day conversion of all completion
functions which are now all contained in the Crypto API.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As it is xts only handles the special return value of EINPROGRESS,
which means that in all other cases it will free data related to the
request.
However, as the caller of xts may specify MAY_BACKLOG, we also need
to expect EBUSY and treat it in the same way. Otherwise backlogged
requests will trigger a use-after-free.
Fixes: 8083b1bf8163 ("crypto: xts - add support for ciphertext stealing")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The xts module needs ecb to be present as it's meant to work
on top of ecb. This patch adds a softdep so ecb can be included
automatically into the initramfs.
Reported-by: rftc <rftc@gmx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The cipher routines in the crypto API are mostly intended for templates
implementing skcipher modes generically in software, and shouldn't be
used outside of the crypto subsystem. So move the prototypes and all
related definitions to a new header file under include/crypto/internal.
Also, let's use the new module namespace feature to move the symbol
exports into a new namespace CRYPTO_INTERNAL.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Colin reports that the memcpy() call in xts_cts_final() trigggers a
"Overlapping buffer in memory copy" warning in Coverity, which is a
false postive, given that tail is guaranteed to be smaller than or
equal to the distance between source and destination.
However, given that any additional bytes that we copy will be ignored
anyway, we can simply copy XTS_BLOCK_SIZE unconditionally, which means
we can use struct assignment of the array members instead, which is
likely to be more efficient as well.
Addresses-Coverity: ("Overlapping buffer in memory copy")
Fixes: 8083b1bf8163 ("crypto: xts - add support for ciphertext stealing")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Overly-generic names can cause problems like naming collisions,
confusing crash reports, and reduced grep-ability. E.g. see
commit d099ea6e6fde ("crypto - Avoid free() namespace collision").
Clean this up for the xts template by prefixing the names with "xts_".
(I didn't use "crypto_xts_" instead because that seems overkill.)
Also constify the tfm context in a couple places, and make
xts_free_instance() use the instance context structure so that it
doesn't just assume the crypto_skcipher_spawn is at the beginning.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
CRYPTO_ALG_NEED_FALLBACK is handled inconsistently. When it's requested
to be clear, some templates propagate that request to child algorithms,
while others don't.
It's apparently desired for NEED_FALLBACK to be propagated, to avoid
deadlocks where a module tries to load itself while it's being
initialized, and to avoid unnecessarily complex fallback chains where we
have e.g. cbc-aes-$driver falling back to cbc(aes-$driver) where
aes-$driver itself falls back to aes-generic, instead of cbc-aes-$driver
simply falling back to cbc(aes-generic). There have been a number of
fixes to this effect:
commit 89027579bc6c ("crypto: xts - Propagate NEED_FALLBACK bit")
commit d2c2a85cfe82 ("crypto: ctr - Propagate NEED_FALLBACK bit")
commit e6c2e65c70a6 ("crypto: cbc - Propagate NEED_FALLBACK bit")
But it seems that other templates can have the same problems too.
To avoid this whack-a-mole, just add NEED_FALLBACK to INHERITED_FLAGS so
that it's always inherited.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The flag CRYPTO_ALG_ASYNC is "inherited" in the sense that when a
template is instantiated, the template will have CRYPTO_ALG_ASYNC set if
any of the algorithms it uses has CRYPTO_ALG_ASYNC set.
We'd like to add a second flag (CRYPTO_ALG_ALLOCATES_MEMORY) that gets
"inherited" in the same way. This is difficult because the handling of
CRYPTO_ALG_ASYNC is hardcoded everywhere. Address this by:
- Add CRYPTO_ALG_INHERITED_FLAGS, which contains the set of flags that
have these inheritance semantics.
- Add crypto_algt_inherited_mask(), for use by template ->create()
methods. It returns any of these flags that the user asked to be
unset and thus must be passed in the 'mask' to crypto_grab_*().
- Also modify crypto_check_attr_type() to handle computing the 'mask'
so that most templates can just use this.
- Make crypto_grab_*() propagate these flags to the template instance
being created so that templates don't have to do this themselves.
Make crypto/simd.c propagate these flags too, since it "wraps" another
algorithm, similar to a template.
Based on a patch by Mikulas Patocka <mpatocka@redhat.com>
(https://lore.kernel.org/r/alpine.LRH.2.02.2006301414580.30526@file01.intranet.prod.int.rdu2.redhat.com).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
gcc-10 complains about using the name of a standard library
function in the kernel, as we are not building with -ffreestanding:
crypto/xts.c:325:13: error: conflicting types for built-in function 'free'; expected 'void(void *)' [-Werror=builtin-declaration-mismatch]
325 | static void free(struct skcipher_instance *inst)
| ^~~~
crypto/lrw.c:290:13: error: conflicting types for built-in function 'free'; expected 'void(void *)' [-Werror=builtin-declaration-mismatch]
290 | static void free(struct skcipher_instance *inst)
| ^~~~
crypto/lrw.c:27:1: note: 'free' is declared in header '<stdlib.h>'
The xts and lrw cipher implementations run into this because they do
not use the conventional namespaced function names.
It might be better to rename all local functions in those files to
help with things like 'ctags' and 'grep', but just renaming these two
avoids the build issue. I picked the more verbose crypto_xts_free()
and crypto_lrw_free() names for consistency with several other drivers
that do use namespaced function names.
Fixes: f1c131b45410 ("crypto: xts - Convert to skcipher")
Fixes: 700cb3f5fe75 ("crypto: lrw - Convert to skcipher")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Simplify the error handling in the XTS template's ->create() function by
taking advantage of crypto_drop_skcipher() now accepting (as a no-op) a
spawn that hasn't been grabbed yet.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Initializing a crypto_skcipher_spawn currently requires:
1. Set spawn->base.inst to point to the instance.
2. Call crypto_grab_skcipher().
But there's no reason for these steps to be separate, and in fact this
unneeded complication has caused at least one bug, the one fixed by
commit 6db43410179b ("crypto: adiantum - initialize crypto_spawn::inst")
So just make crypto_grab_skcipher() take the instance as an argument.
To keep the function calls from getting too unwieldy due to this extra
argument, also introduce a 'mask' variable into the affected places
which weren't already using one.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The CRYPTO_TFM_RES_* flags were apparently meant as a way to make the
->setkey() functions provide more information about errors. But these
flags weren't actually being used or tested, and in many cases they
weren't being set correctly anyway. So they've now been removed.
Also, if someone ever actually needs to start better distinguishing
->setkey() errors (which is somewhat unlikely, as this has been unneeded
for a long time), we'd be much better off just defining different return
values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.
So just remove CRYPTO_TFM_RES_MASK and all the unneeded logic that
propagates these flags around.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for the missing ciphertext stealing part of the XTS-AES
specification, which permits inputs of any size >= the block size.
Cc: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Add support for AEAD in simd
- Add fuzz testing to testmgr
- Add panic_on_fail module parameter to testmgr
- Use per-CPU struct instead multiple variables in scompress
- Change verify API for akcipher
Algorithms:
- Convert x86 AEAD algorithms over to simd
- Forbid 2-key 3DES in FIPS mode
- Add EC-RDSA (GOST 34.10) algorithm
Drivers:
- Set output IV with ctr-aes in crypto4xx
- Set output IV in rockchip
- Fix potential length overflow with hashing in sun4i-ss
- Fix computation error with ctr in vmx
- Add SM4 protected keys support in ccree
- Remove long-broken mxc-scc driver
- Add rfc4106(gcm(aes)) cipher support in cavium/nitrox"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (179 commits)
crypto: ccree - use a proper le32 type for le32 val
crypto: ccree - remove set but not used variable 'du_size'
crypto: ccree - Make cc_sec_disable static
crypto: ccree - fix spelling mistake "protedcted" -> "protected"
crypto: caam/qi2 - generate hash keys in-place
crypto: caam/qi2 - fix DMA mapping of stack memory
crypto: caam/qi2 - fix zero-length buffer DMA mapping
crypto: stm32/cryp - update to return iv_out
crypto: stm32/cryp - remove request mutex protection
crypto: stm32/cryp - add weak key check for DES
crypto: atmel - remove set but not used variable 'alg_name'
crypto: picoxcell - Use dev_get_drvdata()
crypto: crypto4xx - get rid of redundant using_sd variable
crypto: crypto4xx - use sync skcipher for fallback
crypto: crypto4xx - fix cfb and ofb "overran dst buffer" issues
crypto: crypto4xx - fix ctr-aes missing output IV
crypto: ecrdsa - select ASN1 and OID_REGISTRY for EC-RDSA
crypto: ux500 - use ccflags-y instead of CFLAGS_<basename>.o
crypto: ccree - handle tee fips error during power management resume
crypto: ccree - add function to handle cryptocell tee fips error
...
|
|
Use subsys_initcall for registration of all templates and generic
algorithm implementations, rather than module_init. Then change
cryptomgr to use arch_initcall, to place it before the subsys_initcalls.
This is needed so that when both a generic and optimized implementation
of an algorithm are built into the kernel (not loadable modules), the
generic implementation is registered before the optimized one.
Otherwise, the self-tests for the optimized implementation are unable to
allocate the generic implementation for the new comparison fuzz tests.
Note that on arm, a side effect of this change is that self-tests for
generic implementations may run before the unaligned access handler has
been installed. So, unaligned accesses will crash the kernel. This is
arguably a good thing as it makes it easier to detect that type of bug.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When we perform a walk in the completion function, we need to ensure
that it is atomic.
Reported-by: syzbot+6f72c20560060c98b566@syzkaller.appspotmail.com
Fixes: 78105c7e769b ("crypto: xts - Drop use of auxiliary buffer")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since commit acb9b159c784 ("crypto: gf128mul - define gf128mul_x_* in
gf128mul.h"), the gf128mul_x_*() functions are very fast and therefore
caching the computed XTS tweaks has only negligible advantage over
computing them twice.
In fact, since the current caching implementation limits the size of
the calls to the child ecb(...) algorithm to PAGE_SIZE (usually 4096 B),
it is often actually slower than the simple recomputing implementation.
This patch simplifies the XTS template to recompute the XTS tweaks from
scratch in the second pass and thus also removes the need to allocate a
dynamic buffer using kmalloc().
As discussed at [1], the use of kmalloc causes deadlocks with dm-crypt.
PERFORMANCE RESULTS
I measured time to encrypt/decrypt a memory buffer of varying sizes with
xts(ecb-aes-aesni) using a tool I wrote ([2]) and the results suggest
that after this patch the performance is either better or comparable for
both small and large buffers. Note that there is a lot of noise in the
measurements, but the overall difference is easy to see.
Old code:
ALGORITHM KEY (b) DATA (B) TIME ENC (ns) TIME DEC (ns)
xts(aes) 256 64 331 328
xts(aes) 384 64 332 333
xts(aes) 512 64 338 348
xts(aes) 256 512 889 920
xts(aes) 384 512 1019 993
xts(aes) 512 512 1032 990
xts(aes) 256 4096 2152 2292
xts(aes) 384 4096 2453 2597
xts(aes) 512 4096 3041 2641
xts(aes) 256 16384 9443 8027
xts(aes) 384 16384 8536 8925
xts(aes) 512 16384 9232 9417
xts(aes) 256 32768 16383 14897
xts(aes) 384 32768 17527 16102
xts(aes) 512 32768 18483 17322
New code:
ALGORITHM KEY (b) DATA (B) TIME ENC (ns) TIME DEC (ns)
xts(aes) 256 64 328 324
xts(aes) 384 64 324 319
xts(aes) 512 64 320 322
xts(aes) 256 512 476 473
xts(aes) 384 512 509 492
xts(aes) 512 512 531 514
xts(aes) 256 4096 2132 1829
xts(aes) 384 4096 2357 2055
xts(aes) 512 4096 2178 2027
xts(aes) 256 16384 6920 6983
xts(aes) 384 16384 8597 7505
xts(aes) 512 16384 7841 8164
xts(aes) 256 32768 13468 12307
xts(aes) 384 32768 14808 13402
xts(aes) 512 32768 15753 14636
[1] https://lkml.org/lkml/2018/8/23/1315
[2] https://gitlab.com/omos/linux-crypto-bench
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
All callers pass chain=0 to scatterwalk_crypto_chain().
Remove this unneeded parameter.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that all users of xts_crypt() have been removed in favor of the XTS
template wrapping an ECB mode algorithm, remove xts_crypt().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.15:
API:
- Disambiguate EBUSY when queueing crypto request by adding ENOSPC.
This change touches code outside the crypto API.
- Reset settings when empty string is written to rng_current.
Algorithms:
- Add OSCCA SM3 secure hash.
Drivers:
- Remove old mv_cesa driver (replaced by marvell/cesa).
- Enable rfc3686/ecb/cfb/ofb AES in crypto4xx.
- Add ccm/gcm AES in crypto4xx.
- Add support for BCM7278 in iproc-rng200.
- Add hash support on Exynos in s5p-sss.
- Fix fallback-induced error in vmx.
- Fix output IV in atmel-aes.
- Fix empty GCM hash in mediatek.
Others:
- Fix DoS potential in lib/mpi.
- Fix potential out-of-order issues with padata"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
lib/mpi: call cond_resched() from mpi_powm() loop
crypto: stm32/hash - Fix return issue on update
crypto: dh - Remove pointless checks for NULL 'p' and 'g'
crypto: qat - Clean up error handling in qat_dh_set_secret()
crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
crypto: dh - Don't permit 'p' to be 0
crypto: dh - Fix double free of ctx->p
hwrng: iproc-rng200 - Add support for BCM7278
dt-bindings: rng: Document BCM7278 RNG200 compatible
crypto: chcr - Replace _manual_ swap with swap macro
crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]
hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume
crypto: atmel - remove empty functions
crypto: ecdh - remove empty exit()
MAINTAINERS: update maintainer for qat
crypto: caam - remove unused param of ctx_map_to_sec4_sg()
crypto: caam - remove unneeded edesc zeroization
crypto: atmel-aes - Reset the controller before each use
crypto: atmel-aes - properly set IV after {en,de}crypt
hwrng: core - Reset user selected rng by writing "" to rng_current
...
|
|
Now that -EBUSY return code only indicates backlog queueing
we can safely remove the now redundant check for the
CRYPTO_TFM_REQ_MAY_BACKLOG flag when -EBUSY is returned.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
All error handling paths 'goto err_drop_spawn' except this one.
In order to avoid some resources leak, we should do it as well here.
Fixes: f1c131b45410 ("crypto: xts - Convert to skcipher")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.12:
API:
- Add batch registration for acomp/scomp
- Change acomp testing to non-unique compressed result
- Extend algorithm name limit to 128 bytes
- Require setkey before accept(2) in algif_aead
Algorithms:
- Add support for deflate rfc1950 (zlib)
Drivers:
- Add accelerated crct10dif for powerpc
- Add crc32 in stm32
- Add sha384/sha512 in ccp
- Add 3des/gcm(aes) for v5 devices in ccp
- Add Queue Interface (QI) backend support in caam
- Add new Exynos RNG driver
- Add ThunderX ZIP driver
- Add driver for hardware random generator on MT7623 SoC"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (101 commits)
crypto: stm32 - Fix OF module alias information
crypto: algif_aead - Require setkey before accept(2)
crypto: scomp - add support for deflate rfc1950 (zlib)
crypto: scomp - allow registration of multiple scomps
crypto: ccp - Change ISR handler method for a v5 CCP
crypto: ccp - Change ISR handler method for a v3 CCP
crypto: crypto4xx - rename ce_ring_contol to ce_ring_control
crypto: testmgr - Allow ecb(cipher_null) in FIPS mode
Revert "crypto: arm64/sha - Add constant operand modifier to ASM_EXPORT"
crypto: ccp - Disable interrupts early on unload
crypto: ccp - Use only the relevant interrupt bits
hwrng: mtk - Add driver for hardware random generator on MT7623 SoC
dt-bindings: hwrng: Add Mediatek hardware random generator bindings
crypto: crct10dif-vpmsum - Fix missing preempt_disable()
crypto: testmgr - replace compression known answer test
crypto: acomp - allow registration of multiple acomps
hwrng: n2 - Use devm_kcalloc() in n2rng_probe()
crypto: chcr - Fix error handling related to 'chcr_alloc_shash'
padata: get_next is never NULL
crypto: exynos - Add new Exynos RNG driver
...
|
|
When we get an EINPROGRESS completion in xts, we will end up marking
the request as done and freeing it. This then blows up when the
request is really completed as we've already freed the memory.
Fixes: f1c131b45410 ("crypto: xts - Convert to skcipher")
Cc: <stable@vger.kernel.org>
Reported-by: Nathan Royce <nroycea+kernel@gmail.com>
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Currently, gf128mul_x_ble works with pointers to be128, even though it
actually interprets the words as little-endian. Consequently, it uses
cpu_to_le64/le64_to_cpu on fields of type __be64, which is incorrect.
This patch fixes that by changing the function to accept pointers to
le128 and updating all users accordingly.
Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com>
Reviewd-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In the generic XTS and LRW algorithms, for input data > 128 bytes, a
temporary buffer is allocated to hold the values to be XOR'ed with the
data before and after encryption or decryption. If the allocation
fails, the fixed-size buffer embedded in the request buffer is meant to
be used as a fallback --- resulting in more calls to the ECB algorithm,
but still producing the correct result. However, we weren't correctly
limiting subreq->cryptlen in this case, resulting in pre_crypt()
overrunning the embedded buffer. Fix this by setting subreq->cryptlen
correctly.
Fixes: f1c131b45410 ("crypto: xts - Convert to skcipher")
Fixes: 700cb3f5fe75 ("crypto: lrw - Convert to skcipher")
Cc: stable@vger.kernel.org # v4.10+
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When we're used as a fallback algorithm, we should propagate
the NEED_FALLBACK bit when searching for the underlying ECB mode.
This just happens to fix a hang too because otherwise the search
may end up loading the same module that triggered this XTS creation.
Cc: stable@vger.kernel.org #4.10
Fixes: f1c131b45410 ("crypto: xts - Convert to skcipher")
Reported-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch converts xts over to the skcipher interface. It also
optimises the implementation to be based on ECB instead of the
underlying cipher. For compatibility the existing naming scheme
of xts(aes) is maintained as opposed to the more obvious one of
xts(ecb(aes)).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The sentence 'Based on' is misspelled, respell it.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The patch centralizes the XTS key check logic into the service function
xts_check_key which is invoked from the different XTS implementations.
With this, the XTS implementations in ARM, ARM64, PPC and S390 have now
a sanity check for the XTS keys similar to the other arches.
In addition, this service function received a check to ensure that the
key != the tweak key which is mandated by FIPS 140-2 IG A.9. As the
check is not present in the standards defining XTS, it is only enforced
in FIPS mode of the kernel.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This adds the module loading prefix "crypto-" to the template lookup
as well.
For example, attempting to load 'vfat(blowfish)' via AF_ALG now correctly
includes the "crypto-" prefix at every level, correctly rejecting "vfat":
net-pf-38
algif-hash
crypto-vfat(blowfish)
crypto-vfat(blowfish)-all
crypto-vfat
Reported-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add xts_crypt() function that can be used by cipher implementations that can
benefit from parallelized cipher operations.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
XTS has fixed blocksize of 16. Define XTS_BLOCK_SIZE and use in place of
crypto_cipher_blocksize().
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
|
|
Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)). The former makes more
clear what is the purpose of the operation, which otherwise looks like a
no-op.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
type T;
T x;
identifier f;
@@
T f (...) { <+...
- ERR_PTR(PTR_ERR(x))
+ x
...+> }
@@
expression x;
@@
- ERR_PTR(PTR_ERR(x))
+ ERR_CAST(x)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The XTS blockmode uses a copy of the IV which is saved on the stack
and may or may not be properly aligned. If it is not, it will break
hardware cipher like the geode or padlock.
This patch encrypts the IV in place so we don't have to worry about
alignment.
Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Tested-by: Stefan Hellermann <stefan@the2masters.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
XTS currently considered to be the successor of the LRW mode by the IEEE1619
workgroup. LRW was discarded, because it was not secure if the encyption key
itself is encrypted with LRW.
XTS does not have this problem. The implementation is pretty straightforward,
a new function was added to gf128mul to handle GF(128) elements in ble format.
Four testvectors from the specification
http://grouper.ieee.org/groups/1619/email/pdf00086.pdf
were added, and they verify on my system.
Signed-off-by: Rik Snel <rsnel@cube.dyndns.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
