| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"11 hotfixes. 7 are cc:stable and the other 4 address post-6.6 issues
or are not considered backporting material"
* tag 'mm-hotfixes-stable-2023-12-27-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add an old address for Naoya Horiguchi
mm/memory-failure: cast index to loff_t before shifting it
mm/memory-failure: check the mapcount of the precise page
mm/memory-failure: pass the folio and the page to collect_procs()
selftests: secretmem: floor the memory size to the multiple of page_size
mm: migrate high-order folios in swap cache correctly
maple_tree: do not preallocate nodes for slot stores
mm/filemap: avoid buffered read/write race to read inconsistent data
kunit: kasan_test: disable fortify string checker on kmalloc_oob_memset
kexec: select CRYPTO from KEXEC_FILE instead of depending on it
kexec: fix KEXEC_FILE dependencies
|
|
Only the posix timer system calls use this (when the posix timer support
is disabled, which does not actually happen in any normal case), because
they had debug code to print out a warning about missing system calls.
Get rid of that special case, and just use the standard COND_SYSCALL
interface that creates weak system call stubs that return -ENOSYS for
when the system call does not exist.
This fixes a kCFI issue with the SYS_NI() hackery:
CFI failure at int80_emulation+0x67/0xb0 (target: sys_ni_posix_timers+0x0/0x70; expected type: 0xb02b34d9)
WARNING: CPU: 0 PID: 48 at int80_emulation+0x67/0xb0
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix virtual vs physical address confusion in Storage Class Memory
(SCM) block device driver.
- Fix saving and restoring of FPU kernel context, which could lead to
corruption of vector registers 8-15
- Update defconfigs
* tag 's390-6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
s390/vx: fix save/restore of fpu kernel context
s390/scm: fix virtual vs physical address confusion
|
|
The cleanup for the CONFIG_KEXEC Kconfig logic accidentally changed the
'depends on CRYPTO=y' dependency to a plain 'depends on CRYPTO', which
causes a link failure when all the crypto support is in a loadable module
and kexec_file support is built-in:
x86_64-linux-ld: vmlinux.o: in function `__x64_sys_kexec_file_load':
(.text+0x32e30a): undefined reference to `crypto_alloc_shash'
x86_64-linux-ld: (.text+0x32e58e): undefined reference to `crypto_shash_update'
x86_64-linux-ld: (.text+0x32e6ee): undefined reference to `crypto_shash_final'
Both s390 and x86 have this problem, while ppc64 and riscv have the
correct dependency already. On riscv, the dependency is only used for the
purgatory, not for the kexec_file code itself, which may be a bit
surprising as it means that with CONFIG_CRYPTO=m, it is possible to enable
KEXEC_FILE but then the purgatory code is silently left out.
Move this into the common Kconfig.kexec file in a way that is correct
everywhere, using the dependency on CRYPTO_SHA256=y only when the
purgatory code is available. This requires reversing the dependency
between ARCH_SUPPORTS_KEXEC_PURGATORY and KEXEC_FILE, but the effect
remains the same, other than making riscv behave like the other ones.
On s390, there is an additional dependency on CRYPTO_SHA256_S390, which
should technically not be required but gives better performance. Remove
this dependency here, noting that it was not present in the initial
Kconfig code but was brought in without an explanation in commit
71406883fd357 ("s390/kexec_file: Add kexec_file_load system call").
[arnd@arndb.de: fix riscv build]
Link: https://lkml.kernel.org/r/67ddd260-d424-4229-a815-e3fcfb864a77@app.fastmail.com
Link: https://lkml.kernel.org/r/20231023110308.1202042-1-arnd@kernel.org
Fixes: 6af5138083005 ("x86/kexec: refactor for kernel/Kconfig.kexec")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com>
Tested-by: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Conor Dooley <conor@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The KERNEL_FPR mask only contains a flag for the first eight vector
registers. However floating point registers overlay parts of the first
sixteen vector registers.
This could lead to vector register corruption if a kernel fpu context uses
any of the vector registers 8 to 15 and is interrupted or calls a
KERNEL_FPR context. If that context uses also vector registers 8 to 15,
their contents will be corrupted on return.
Luckily this is currently not a real bug, since the kernel has only one
KERNEL_FPR user with s390_adjust_jiffies() and it is only using floating
point registers 0 to 2.
Fix this by using the correct bits for KERNEL_FPR.
Fixes: 7f79695cc1b6 ("s390/fpu: improve kernel_fpu_[begin|end]")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
This code is rarely (never?) enabled by distros, and it hasn't caught
anything in decades. Let's kill off this legacy debug code.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master
Two small but important bugfixes.
|
|
In the meantime hopefully most people got used to forward
declarations, therefore remove the explanation.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Add missing IPL_TYPE_ECKD_DUMP case to ipl_init() creating
ECKD ipl device attribute group similar to IPL_TYPE_ECKD case.
Commit e2d2a2968f2a ("s390/ipl: add eckd dump support") should
have had it from the beginning.
Fixes: e2d2a2968f2a ("s390/ipl: add eckd dump support")
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Setting event::hw.last_tag to zero is not necessary. The memory
for each event is dynamically allocated by the kernel common code and
initialized to zero already. Remove this unnecessary assignment.
Move the comment to function paicrypt_start() for clarification.
Suggested-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
When the CMMA state needs to be reset, the no-dat bit also needs to be
reset. Failure to do so could cause issues in the guest, since the
guest expects the bit to be cleared after a reset.
Cc: <stable@vger.kernel.org>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Message-ID: <20231109123624.37314-1-imbrenda@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
When the host invalidates a guest page, it will also check if the page
was used to map the prefix of any guest CPUs, in which case they are
stopped and marked as needing a prefix refresh. Upon starting the
affected CPUs again, their prefix pages are explicitly faulted in and
revalidated if they had been invalidated. A bit in the PGSTEs indicates
whether or not a page might contain a prefix. The bit is allowed to
overindicate. Pages above 2G are skipped, because they cannot be
prefixes, since KVM runs all guests with MSO = 0.
The same applies for nested guests (VSIE). When the host invalidates a
guest page that maps the prefix of the nested guest, it has to stop the
affected nested guest CPUs and mark them as needing a prefix refresh.
The same PGSTE bit used for the guest prefix is also used for the
nested guest. Pages above 2G are skipped like for normal guests, which
is the source of the bug.
The nested guest runs is the guest primary address space. The guest
could be running the nested guest using MSO != 0. If the MSO + prefix
for the nested guest is above 2G, the check for nested prefix will skip
it. This will cause the invalidation notifier to not stop the CPUs of
the nested guest and not mark them as needing refresh. When the nested
guest is run again, its prefix will not be refreshed, since it has not
been marked for refresh. This will cause a fatal validity intercept
with VIR code 37.
Fix this by removing the check for 2G for nested guests. Now all
invalidations of pages with the notify bit set will always scan the
existing VSIE shadow state descriptors.
This allows to catch invalidations of nested guest prefix mappings even
when the prefix is above 2G in the guest virtual address space.
Fixes: a3508fbe9dc6 ("KVM: s390: vsie: initial support for nested virtualization")
Tested-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20231102153549.53984-1-imbrenda@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Most architectures that support kprobes declare this function in their
own asm/kprobes.h header and provide an override, but some are missing
the prototype, which causes a warning for the __weak stub implementation:
kernel/kprobes.c:1865:12: error: no previous prototype for 'kprobe_exceptions_notify' [-Werror=missing-prototypes]
1865 | int __weak kprobe_exceptions_notify(struct notifier_block *self,
Move the prototype into linux/kprobes.h so it is visible to all
the definitions.
Link: https://lore.kernel.org/all/20231108125843.3806765-4-arnd@kernel.org/
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Make default-domains mandatory for all IOMMU drivers
- Remove group refcounting
- Add generic_single_device_group() helper and consolidate drivers
- Cleanup map/unmap ops
- Scaling improvements for the IOVA rcache depot
- Convert dart & iommufd to the new domain_alloc_paging()
ARM-SMMU:
- Device-tree binding update:
- Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC
- SMMUv2:
- Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs
- SMMUv3:
- Large refactoring of the context descriptor code to move the CD
table into the master, paving the way for '->set_dev_pasid()'
support on non-SVA domains
- Minor cleanups to the SVA code
Intel VT-d:
- Enable debugfs to dump domain attached to a pasid
- Remove an unnecessary inline function
AMD IOMMU:
- Initial patches for SVA support (not complete yet)
S390 IOMMU:
- DMA-API conversion and optimized IOTLB flushing
And some smaller fixes and improvements"
* tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (102 commits)
iommu/dart: Remove the force_bypass variable
iommu/dart: Call apple_dart_finalize_domain() as part of alloc_paging()
iommu/dart: Convert to domain_alloc_paging()
iommu/dart: Move the blocked domain support to a global static
iommu/dart: Use static global identity domains
iommufd: Convert to alloc_domain_paging()
iommu/vt-d: Use ops->blocked_domain
iommu/vt-d: Update the definition of the blocking domain
iommu: Move IOMMU_DOMAIN_BLOCKED global statics to ops->blocked_domain
Revert "iommu/vt-d: Remove unused function"
iommu/amd: Remove DMA_FQ type from domain allocation path
iommu: change iommu_map_sgtable to return signed values
iommu/virtio: Add __counted_by for struct viommu_request and use struct_size()
iommu/vt-d: debugfs: Support dumping a specified page table
iommu/vt-d: debugfs: Create/remove debugfs file per {device, pasid}
iommu/vt-d: debugfs: Dump entry pointing to huge page
iommu/vt-d: Remove unused function
iommu/arm-smmu-v3-sva: Remove bond refcount
iommu/arm-smmu-v3-sva: Remove unused iommu_sva handle
iommu/arm-smmu-v3: Rename cdcfg to cd_table
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Get rid of s390 specific use of two PTEs per 4KB page with complex
half-used pages tracking. Using full 4KB pages for 2KB PTEs increases
the memory footprint of page tables but drastically simplify mm code,
removing a common blocker for common code changes and adaptations
- Simplify and rework "cmma no-dat" handling. This is a follow up for
recent fixes which prevent potential incorrect guest TLB flushes
- Add perf user stack unwinding as well as USER_STACKTRACE support for
user space built with -mbackchain compile option
- Add few missing conversion from tlb_remove_table to tlb_remove_ptdesc
- Fix crypto cards vanishing in a secure execution environment due to
asynchronous errors
- Avoid reporting crypto cards or queues in check-stop state as online
- Fix null-ptr deference in AP bus code triggered by early config
change via SCLP
- Couple of stability improvements in AP queue interrupt handling
* tag 's390-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: make pte_free_tlb() similar to pXd_free_tlb()
s390/mm: use compound page order to distinguish page tables
s390/mm: use full 4KB page for 2KB PTE
s390/cmma: rework no-dat handling
s390/cmma: move arch_set_page_dat() to header file
s390/cmma: move set_page_stable() and friends to header file
s390/cmma: move parsing of cmma kernel parameter to early boot code
s390/cmma: cleanup inline assemblies
s390/ap: fix vanishing crypto cards in SE environment
s390/zcrypt: don't report online if card or queue is in check-stop state
s390: add USER_STACKTRACE support
s390/perf: implement perf_callchain_user()
s390/ap: fix AP bus crash on early config change callback invocation
s390/ap: re-enable interrupt for AP queues
s390/ap: rework to use irq info from ap queue status
s390/mm: add missing conversion to use ptdescs
|
|
Make pte_free_tlb() look similar to pXd_free_tlb() family
functions.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
CRSTs always have size of four pages, while 2KB-size page tables
always occupy a single page. Use that information to distinguish
page tables from CRSTs.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Cease using 4KB pages to host two 2KB PTEs. That greatly
simplifies the memory management code at the expense of
page tables memory footprint.
Instead of two PTEs per 4KB page use only upper half of
the parent page for a single PTE. With that the list of
half-used pages pgtable_list becomes unneeded.
Further, the upper byte of the parent page _refcount
counter does not need to be used for fragments tracking
and could be left alone.
Commit 8211dad62798 ("s390: add pte_free_defer() for
pgtables sharing page") introduced the use of PageActive
flag to coordinate a deferred free with 2KB page table
fragments tracking. Since there is no tracking anymore,
there is no need for using PageActive flag.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Rework the way physical pages are set no-dat / dat:
The old way is:
- Rely on that all pages are initially marked "dat"
- Allocate page tables for the kernel mapping
- Enable dat
- Walk the whole kernel mapping and set PG_arch_1 bit in all struct pages
that belong to pages of kernel page tables
- Walk all struct pages and test and clear the PG_arch_1 bit. If the bit is
not set, set the page state to no-dat
- For all subsequent page table allocations, set the page state to dat
(remove the no-dat state) on allocation time
Change this rather complex logic to a simpler approach:
- Set the whole physical memory (all pages) to "no-dat"
- Explicitly set those page table pages to "dat" which are part of the
kernel image (e.g. swapper_pg_dir)
- For all subsequent page table allocations, set the page state to dat
(remove the no-dat state) on allocation time
In result the code is simpler, and this also allows to get rid of one
odd usage of the PG_arch_1 bit.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
In order to be usable for early boot code move the simple
arch_set_page_dat() function to header file, and add its counter-part
arch_set_page_nodat(). Also change the parameters, and the function name
slightly.
This is required since there aren't any struct pages available in early
boot code, and renaming of functions is done to make sure that all users
are converted to the new API.
Instead of a pointer to a struct page a virtual address is passed, and
instead of an order the number of pages for which the page state needs be
set.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
In order to be usable for early boot code move the simple set_page_xxx()
function to header file. Also change the parameters, and the function names
slightly.
This is required since there aren't any struct pages available in early
boot code, and renaming of functions is done to make sure that all users
are converted to the new API.
Instead of a pointer to a struct page a virtual address is passed, and
instead of an order the number of pages for which the page state needs be
set.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The "cmma=" kernel command line parameter needs to be parsed early for
upcoming changes. Therefore move the parsing code.
Note that EX_TABLE handling of cmma_test_essa() needs to be open-coded,
since the early boot code doesn't have infrastructure for handling expected
exceptions.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Cleanup cmma related inline assemblies:
- consolidate inline assemblies
- use symbolic names
- add same white space where missing
- add braces to for-loops which contain a multi-line statement
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Use the perf_callchain_user() code as blueprint to also add support for
USER_STACKTRACE. To describe how to use this cite the commit message of the
LoongArch implementation which came with commit 4d7bf939df08 ("LoongArch:
Add USER_STACKTRACE support"), but replace -fno-omit-frame-pointer option
with the s390 specific -mbackchain option:
====================================================================== To
get the best stacktrace output, you can compile your userspace programs
with frame pointers (at least glibc + the app you are tracing).
1, export "CC = gcc -mbackchain";
2, compile your programs with "CC";
3, use uprobe to get stacktrace output.
...
echo 'p:malloc /usr/lib64/libc.so.6:0x0a4704 size=%r2:u64' > uprobe_events
echo 'p:free /usr/lib64/libc.so.6:0x0a4d50 ptr=%r2:u64' >> uprobe_events
echo 'comm == "demo"' > ./events/uprobes/malloc/filter
echo 'comm == "demo"' > ./events/uprobes/free/filter
echo 1 > ./options/userstacktrace
echo 1 > ./options/sym-userobj
...
======================================================================
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Daan De Meyer and Neal Gompa reported that s390 does not support perf user
stack unwinding.
This was never implemented since this requires user space to be compiled
with the -mbackchain compile option, which until now no distribution
did. However this is going to change with Fedora. Therefore provide a
perf_callchain_user() implementation.
Note that due to the way s390 sets up stack frames the provided call chains
can contain invalid values. This is especially true for the first stack
frame, where it is not possible to tell if the return address has been
written to the stack already or not.
Reported-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Reported-by: Neal Gompa <ngompa@fedoraproject.org>
Closes: https://lore.kernel.org/all/CAO8sHcn3+_qrnvp0580aK7jN0Wion5F7KYeBAa4MnCY4mqABPA@mail.gmail.com/
Link: https://lore.kernel.org/all/20231030123558.10816-A-hca@linux.ibm.com
Reviewed-by: Neal Gompa <ngompa@fedoraproject.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Commit 6326c26c1514 ("s390: convert various pgalloc functions
to use ptdescs") missed to convert tlb_remove_table() into
tlb_remove_ptdesc() in few locations.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Implement the binary search in modpost for faster symbol lookup
- Respect HOSTCC when linking host programs written in Rust
- Change the binrpm-pkg target to generate kernel-devel RPM package
- Fix endianness issues for tee and ishtp MODULE_DEVICE_TABLE
- Unify vdso_install rules
- Remove unused __memexit* annotations
- Eliminate stale whitelisting for __devinit/__devexit from modpost
- Enable dummy-tools to handle the -fpatchable-function-entry flag
- Add 'userldlibs' syntax
* tag 'kbuild-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
kbuild: support 'userldlibs' syntax
kbuild: dummy-tools: pretend we understand -fpatchable-function-entry
kbuild: Correct missing architecture-specific hyphens
modpost: squash ALL_{INIT,EXIT}_TEXT_SECTIONS to ALL_TEXT_SECTIONS
modpost: merge sectioncheck table entries regarding init/exit sections
modpost: use ALL_INIT_SECTIONS for the section check from DATA_SECTIONS
modpost: disallow the combination of EXPORT_SYMBOL and __meminit*
modpost: remove EXIT_SECTIONS macro
modpost: remove MEM_INIT_SECTIONS macro
modpost: remove more symbol patterns from the section check whitelist
modpost: disallow *driver to reference .meminit* sections
linux/init: remove __memexit* annotations
modpost: remove ALL_EXIT_DATA_SECTIONS macro
kbuild: simplify cmd_ld_multi_m
kbuild: avoid too many execution of scripts/pahole-flags.sh
kbuild: remove ARCH_POSTLINK from module builds
kbuild: unify no-compiler-targets and no-sync-config-targets
kbuild: unify vdso_install rules
docs: kbuild: add INSTALL_DTBS_PATH
UML: remove unused cmd_vdso_install
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Get rid of private VM_FAULT flags
- Add word-at-a-time implementation
- Add DCACHE_WORD_ACCESS support
- Cleanup control register handling
- Disallow CPU hotplug of CPU 0 to simplify its handling complexity,
following a similar restriction in x86
- Optimize pai crypto map allocation
- Update the list of crypto express EP11 coprocessor operation modes
- Fixes and improvements for secure guests AP pass-through
- Several fixes to address incorrect page marking for address
translation with the "cmma no-dat" feature, preventing potential
incorrect guest TLB flushes
- Fix early IPI handling
- Several virtual vs physical address confusion fixes
- Various small fixes and improvements all over the code
* tag 's390-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (74 commits)
s390/cio: replace deprecated strncpy with strscpy
s390/sclp: replace deprecated strncpy with strtomem
s390/cio: fix virtual vs physical address confusion
s390/cio: export CMG value as decimal
s390: delete the unused store_prefix() function
s390/cmma: fix handling of swapper_pg_dir and invalid_pg_dir
s390/cmma: fix detection of DAT pages
s390/sclp: handle default case in sclp memory notifier
s390/pai_crypto: remove per-cpu variable assignement in event initialization
s390/pai: initialize event count once at initialization
s390/pai_crypto: use PERF_ATTACH_TASK define for per task detection
s390/mm: add missing arch_set_page_dat() call to gmap allocations
s390/mm: add missing arch_set_page_dat() call to vmem_crst_alloc()
s390/cmma: fix initial kernel address space page table walk
s390/diag: add missing virt_to_phys() translation to diag224()
s390/mm,fault: move VM_FAULT_ERROR handling to do_exception()
s390/mm,fault: remove VM_FAULT_BADMAP and VM_FAULT_BADACCESS
s390/mm,fault: remove VM_FAULT_SIGNAL
s390/mm,fault: remove VM_FAULT_BADCONTEXT
s390/mm,fault: simplify kfence fault handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its
guest
- Optimization for vSGI injection, opportunistically compressing
MPIDR to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems,
reducing the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
LoongArch:
- New architecture for kvm.
The hardware uses the same model as x86, s390 and RISC-V, where
guest/host mode is orthogonal to supervisor/user mode. The
virtualization extensions are very similar to MIPS, therefore the
code also has some similarities but it's been cleaned up to avoid
some of the historical bogosities that are found in arch/mips. The
kernel emulates MMU, timer and CSR accesses, while interrupt
controllers are only emulated in userspace, at least for now.
RISC-V:
- Support for the Smstateen and Zicond extensions
- Support for virtualizing senvcfg
- Support for virtualized SBI debug console (DBCN)
S390:
- Nested page table management can be monitored through tracepoints
and statistics
x86:
- Fix incorrect handling of VMX posted interrupt descriptor in
KVM_SET_LAPIC, which could result in a dropped timer IRQ
- Avoid WARN on systems with Intel IPI virtualization
- Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs
without forcing more common use cases to eat the extra memory
overhead.
- Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and
SBPB, aka Selective Branch Predictor Barrier).
- Fix a bug where restoring a vCPU snapshot that was taken within 1
second of creating the original vCPU would cause KVM to try to
synchronize the vCPU's TSC and thus clobber the correct TSC being
set by userspace.
- Compute guest wall clock using a single TSC read to avoid
generating an inaccurate time, e.g. if the vCPU is preempted
between multiple TSC reads.
- "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which
complain about a "Firmware Bug" if the bit isn't set for select
F/M/S combos. Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to
appease Windows Server 2022.
- Don't apply side effects to Hyper-V's synthetic timer on writes
from userspace to fix an issue where the auto-enable behavior can
trigger spurious interrupts, i.e. do auto-enabling only for guest
writes.
- Remove an unnecessary kick of all vCPUs when synchronizing the
dirty log without PML enabled.
- Advertise "support" for non-serializing FS/GS base MSR writes as
appropriate.
- Harden the fast page fault path to guard against encountering an
invalid root when walking SPTEs.
- Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n.
- Use the fast path directly from the timer callback when delivering
Xen timer events, instead of waiting for the next iteration of the
run loop. This was not done so far because previously proposed code
had races, but now care is taken to stop the hrtimer at critical
points such as restarting the timer or saving the timer information
for userspace.
- Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future
flag.
- Optimize injection of PMU interrupts that are simultaneous with
NMIs.
- Usual handful of fixes for typos and other warts.
x86 - MTRR/PAT fixes and optimizations:
- Clean up code that deals with honoring guest MTRRs when the VM has
non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled.
- Zap EPT entries when non-coherent DMA assignment stops/start to
prevent using stale entries with the wrong memtype.
- Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y
This was done as a workaround for virtual machine BIOSes that did
not bother to clear CR0.CD (because ancient KVM/QEMU did not bother
to set it, in turn), and there's zero reason to extend the quirk to
also ignore guest PAT.
x86 - SEV fixes:
- Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts
SHUTDOWN while running an SEV-ES guest.
- Clean up the recognition of emulation failures on SEV guests, when
KVM would like to "skip" the instruction but it had already been
partially emulated. This makes it possible to drop a hack that
second guessed the (insufficient) information provided by the
emulator, and just do the right thing.
Documentation:
- Various updates and fixes, mostly for x86
- MTRR and PAT fixes and optimizations"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (164 commits)
KVM: selftests: Avoid using forced target for generating arm64 headers
tools headers arm64: Fix references to top srcdir in Makefile
KVM: arm64: Add tracepoint for MMIO accesses where ISV==0
KVM: arm64: selftest: Perform ISB before reading PAR_EL1
KVM: arm64: selftest: Add the missing .guest_prepare()
KVM: arm64: Always invalidate TLB for stage-2 permission faults
KVM: x86: Service NMI requests after PMI requests in VM-Enter path
KVM: arm64: Handle AArch32 SPSR_{irq,abt,und,fiq} as RAZ/WI
KVM: arm64: Do not let a L1 hypervisor access the *32_EL2 sysregs
KVM: arm64: Refine _EL2 system register list that require trap reinjection
arm64: Add missing _EL2 encodings
arm64: Add missing _EL12 encodings
KVM: selftests: aarch64: vPMU test for validating user accesses
KVM: selftests: aarch64: vPMU register test for unimplemented counters
KVM: selftests: aarch64: vPMU register test for implemented counters
KVM: selftests: aarch64: Introduce vpmu_counter_access test
tools: Import arm_pmuv3.h
KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest
KVM: arm64: Sanitize PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} before first run
KVM: arm64: Add {get,set}_user for PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"To help make the move of sysctls out of kernel/sysctl.c not incur a
size penalty sysctl has been changed to allow us to not require the
sentinel, the final empty element on the sysctl array. Joel Granados
has been doing all this work. On the v6.6 kernel we got the major
infrastructure changes required to support this. For v6.7-rc1 we have
all arch/ and drivers/ modified to remove the sentinel. Both arch and
driver changes have been on linux-next for a bit less than a month. It
is worth re-iterating the value:
- this helps reduce the overall build time size of the kernel and run
time memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move
sysctls out from kernel/sysctl.c to their own files
For v6.8-rc1 expect removal of all the sentinels and also then the
unneeded check for procname == NULL.
The last two patches are fixes recently merged by Krister Johansen
which allow us again to use softlockup_panic early on boot. This used
to work but the alias work broke it. This is useful for folks who want
to detect softlockups super early rather than wait and spend money on
cloud solutions with nothing but an eventual hung kernel. Although
this hadn't gone through linux-next it's also a stable fix, so we
might as well roll through the fixes now"
* tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (23 commits)
watchdog: move softlockup_panic back to early_param
proc: sysctl: prevent aliased sysctls from getting passed to init
intel drm: Remove now superfluous sentinel element from ctl_table array
Drivers: hv: Remove now superfluous sentinel element from ctl_table array
raid: Remove now superfluous sentinel element from ctl_table array
fw loader: Remove the now superfluous sentinel element from ctl_table array
sgi-xp: Remove the now superfluous sentinel element from ctl_table array
vrf: Remove the now superfluous sentinel element from ctl_table array
char-misc: Remove the now superfluous sentinel element from ctl_table array
infiniband: Remove the now superfluous sentinel element from ctl_table array
macintosh: Remove the now superfluous sentinel element from ctl_table array
parport: Remove the now superfluous sentinel element from ctl_table array
scsi: Remove now superfluous sentinel element from ctl_table array
tty: Remove now superfluous sentinel element from ctl_table array
xen: Remove now superfluous sentinel element from ctl_table array
hpet: Remove now superfluous sentinel element from ctl_table array
c-sky: Remove now superfluous sentinel element from ctl_talbe array
powerpc: Remove now superfluous sentinel element from ctl_table arrays
riscv: Remove now superfluous sentinel element from ctl_table array
x86/vdso: Remove now superfluous sentinel element from ctl_table array
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull ia64 removal and asm-generic updates from Arnd Bergmann:
- The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will be
maintained as an LTS kernel.
- The architecture specific system call tables are updated for the
added map_shadow_stack() syscall and to remove references to the
long-gone sys_lookup_dcookie() syscall.
* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
hexagon: Remove unusable symbols from the ptrace.h uapi
asm-generic: Fix spelling of architecture
arch: Reserve map_shadow_stack() syscall number for all architectures
syscalls: Cleanup references to sys_lookup_dcookie()
Documentation: Drop or replace remaining mentions of IA64
lib/raid6: Drop IA64 support
Documentation: Drop IA64 from feature descriptions
kernel: Drop IA64 support from sig_fault handlers
arch: Remove Itanium (IA-64) architecture
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support usec resolution of TCP timestamps, enabled selectively by a
route attribute.
- Defer regular TCP ACK while processing socket backlog, try to send
a cumulative ACK at the end. Increase single TCP flow performance
on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).
- The Fair Queuing (FQ) packet scheduler:
- add built-in 3 band prio / WRR scheduling
- support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
- improve inactive flow reporting
- optimize the layout of structures for better cache locality
- Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
replacement for the old MD5 option.
- Add more retransmission timeout (RTO) related statistics to
TCP_INFO.
- Support sending fragmented skbs over vsock sockets.
- Make sure we send SIGPIPE for vsock sockets if socket was
shutdown().
- Add sysctl for ignoring lower limit on lifetime in Router
Advertisement PIO, based on an in-progress IETF draft.
- Add sysctl to control activation of TCP ping-pong mode.
- Add sysctl to make connection timeout in MPTCP configurable.
- Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
limit the number of wakeups.
- Support netlink GET for MDB (multicast forwarding), allowing user
space to request a single MDB entry instead of dumping the entire
table.
- Support selective FDB flushing in the VXLAN tunnel driver.
- Allow limiting learned FDB entries in bridges, prevent OOM attacks.
- Allow controlling via configfs netconsole targets which were
created via the kernel cmdline at boot, rather than via configfs at
runtime.
- Support multiple PTP timestamp event queue readers with different
filters.
- MCTP over I3C.
BPF:
- Add new veth-like netdevice where BPF program defines the logic of
the xmit routine. It can operate in L3 and L2 mode.
- Support exceptions - allow asserting conditions which should never
be true but are hard for the verifier to infer. With some extra
flexibility around handling of the exit / failure:
https://lwn.net/Articles/938435/
- Add support for local per-cpu kptr, allow allocating and storing
per-cpu objects in maps. Access to those objects operates on the
value for the current CPU.
This allows to deprecate local one-off implementations of per-CPU
storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.
- Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
for systemd to re-implement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services.
- Enable open-coded task_vma iteration, after maple tree conversion
made it hard to directly walk VMAs in tracing programs.
- Add open-coded task, css_task and css iterator support. One of the
use cases is customizable OOM victim selection via BPF.
- Allow source address selection with bpf_*_fib_lookup().
- Add ability to pin BPF timer to the current CPU.
- Prevent creation of infinite loops by combining tail calls and
fentry/fexit programs.
- Add missed stats for kprobes to retrieve the number of missed
kprobe executions and subsequent executions of BPF programs.
- Inherit system settings for CPU security mitigations.
- Add BPF v4 CPU instruction support for arm32 and s390x.
Changes to common code:
- overflow: add DEFINE_FLEX() for on-stack definition of structs with
flexible array members.
- Process doc update with more guidance for reviewers.
Driver API:
- Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
mutex in most places and remove a lot of smaller locks.
- Create a common DPLL configuration API. Allow configuring and
querying state of PLL circuits used for clock syntonization, in
network time distribution.
- Unify fragmented and full page allocation APIs in page pool code.
Let drivers be ignorant of PAGE_SIZE.
- Rework PHY state machine to avoid races with calls to phy_stop().
- Notify DSA drivers of MAC address changes on user ports, improve
correctness of offloads which depend on matching port MAC
addresses.
- Allow antenna control on injected WiFi frames.
- Reduce the number of variants of napi_schedule().
- Simplify error handling when composing devlink health messages.
Misc:
- A lot of KCSAN data race "fixes", from Eric.
- A lot of __counted_by() annotations, from Kees.
- A lot of strncpy -> strscpy and printf format fixes.
- Replace master/slave terminology with conduit/user in DSA drivers.
- Handful of KUnit tests for netdev and WiFi core.
Removed:
- AppleTalk COPS.
- AppleTalk ipddp.
- TI AR7 CPMAC Ethernet driver.
Drivers:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- add a driver for the Intel E2000 IPUs
- make CRC/FCS stripping configurable
- cross-timestamping for E823 devices
- basic support for E830 devices
- use aux-bus for managing client drivers
- i40e: report firmware versions via devlink
- nVidia/Mellanox:
- support 4-port NICs
- increase max number of channels to 256
- optimize / parallelize SF creation flow
- Broadcom (bnxt):
- enhance NIC temperature reporting
- support PAM4 speeds and lane configuration
- Marvell OcteonTX2:
- PTP pulse-per-second output support
- enable hardware timestamping for VFs
- Solarflare/AMD:
- conntrack NAT offload and offload for tunnels
- Wangxun (ngbe/txgbe):
- expose HW statistics
- Pensando/AMD:
- support PCI level reset
- narrow down the condition under which skbs are linearized
- Netronome/Corigine (nfp):
- support CHACHA20-POLY1305 crypto in IPsec offload
- Ethernet NICs embedded, slower, virtual:
- Synopsys (stmmac):
- add Loongson-1 SoC support
- enable use of HW queues with no offload capabilities
- enable PPS input support on all 5 channels
- increase TX coalesce timer to 5ms
- RealTek USB (r8152): improve efficiency of Rx by using GRO frags
- xen: support SW packet timestamping
- add drivers for implementations based on TI's PRUSS (AM64x EVM)
- nVidia/Mellanox Ethernet datacenter switches:
- avoid poor HW resource use on Spectrum-4 by better block
selection for IPv6 multicast forwarding and ordering of blocks
in ACL region
- Ethernet embedded switches:
- Microchip:
- support configuring the drive strength for EMI compliance
- ksz9477: partial ACL support
- ksz9477: HSR offload
- ksz9477: Wake on LAN
- Realtek:
- rtl8366rb: respect device tree config of the CPU port
- Ethernet PHYs:
- support Broadcom BCM5221 PHYs
- TI dp83867: support hardware LED blinking
- CAN:
- add support for Linux-PHY based CAN transceivers
- at91_can: clean up and use rx-offload helpers
- WiFi:
- MediaTek (mt76):
- new sub-driver for mt7925 USB/PCIe devices
- HW wireless <> Ethernet bridging in MT7988 chips
- mt7603/mt7628 stability improvements
- Qualcomm (ath12k):
- WCN7850:
- enable 320 MHz channels in 6 GHz band
- hardware rfkill support
- enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to
make scan faster
- read board data variant name from SMBIOS
- QCN9274: mesh support
- RealTek (rtw89):
- TDMA-based multi-channel concurrency (MCC)
- Silicon Labs (wfx):
- Remain-On-Channel (ROC) support
- Bluetooth:
- ISO: many improvements for broadcast support
- mark BCM4378/BCM4387 as BROKEN_LE_CODED
- add support for QCA2066
- btmtksdio: enable Bluetooth wakeup from suspend"
* tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits)
net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers
net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos()
net: mana: Use xdp_set_features_flag instead of direct assignment
vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size()
iavf: delete the iavf client interface
iavf: add a common function for undoing the interrupt scheme
iavf: use unregister_netdev
iavf: rely on netdev's own registered state
iavf: fix the waiting time for initial reset
iavf: in iavf_down, don't queue watchdog_task if comms failed
iavf: simplify mutex_trylock+sleep loops
iavf: fix comments about old bit locks
doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name
tools: ynl: introduce option to process unknown attributes or types
ipvlan: properly track tx_errors
netdevsim: Block until all devices are released
nfp: using napi_build_skb() to replace build_skb()
net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy"
net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN
net: dsa: microchip: Refactor switch shutdown routine for WoL preparation
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- nested page table management performance counters
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull RCU updates from Frederic Weisbecker:
- RCU torture, locktorture and generic torture infrastructure updates
that include various fixes, cleanups and consolidations.
Among the user visible things, ftrace dumps can now be found into
their own file, and module parameters get better documented and
reported on dumps.
- Generic and misc fixes all over the place. Some highlights:
* Hotplug handling has seen some light cleanups and comments
* An RCU barrier can now be triggered through sysfs to serialize
memory stress testing and avoid OOM
* Object information is now dumped in case of invalid callback
invocation
* Also various SRCU issues, too hard to trigger to deserve urgent
pull requests, have been fixed
- RCU documentation updates
- RCU reference scalability test minor fixes and doc improvements.
- RCU tasks minor fixes
- Stall detection updates. Introduce RCU CPU Stall notifiers that
allows a subsystem to provide informations to help debugging. Also
cure some false positive stalls.
* tag 'rcu-next-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks: (56 commits)
srcu: Only accelerate on enqueue time
locktorture: Check the correct variable for allocation failure
srcu: Fix callbacks acceleration mishandling
rcu: Comment why callbacks migration can't wait for CPUHP_RCUTREE_PREP
rcu: Standardize explicit CPU-hotplug calls
rcu: Conditionally build CPU-hotplug teardown callbacks
rcu: Remove references to rcu_migrate_callbacks() from diagrams
rcu: Assume rcu_report_dead() is always called locally
rcu: Assume IRQS disabled from rcu_report_dead()
rcu: Use rcu_segcblist_segempty() instead of open coding it
rcu: kmemleak: Ignore kmemleak false positives when RCU-freeing objects
srcu: Fix srcu_struct node grpmask overflow on 64-bit systems
torture: Convert parse-console.sh to mktemp
rcutorture: Traverse possible cpu to set maxcpu in rcu_nocb_toggle()
rcutorture: Replace schedule_timeout*() 1-jiffy waits with HZ/20
torture: Add kvm.sh --debug-info argument
locktorture: Rename readers_bind/writers_bind to bind_readers/bind_writers
doc: Catch-up update for locktorture module parameters
locktorture: Add call_rcu_chains module parameter
locktorture: Add new module parameters to lock_torture_print_module_parms()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Fair scheduler (SCHED_OTHER) improvements:
- Remove the old and now unused SIS_PROP code & option
- Scan cluster before LLC in the wake-up path
- Use candidate prev/recent_used CPU if scanning failed for cluster
wakeup
NUMA scheduling improvements:
- Improve the VMA access-PID code to better skip/scan VMAs
- Extend tracing to cover VMA-skipping decisions
- Improve/fix the recently introduced sched_numa_find_nth_cpu() code
- Generalize numa_map_to_online_node()
Energy scheduling improvements:
- Remove the EM_MAX_COMPLEXITY limit
- Add tracepoints to track energy computation
- Make the behavior of the 'sched_energy_aware' sysctl more
consistent
- Consolidate and clean up access to a CPU's max compute capacity
- Fix uclamp code corner cases
RT scheduling improvements:
- Drive dl_rq->overloaded with dl_rq->pushable_dl_tasks updates
- Drive the ->rto_mask with rt_rq->pushable_tasks updates
Scheduler scalability improvements:
- Rate-limit updates to tg->load_avg
- On x86 disable IBRS when CPU is offline to improve single-threaded
performance
- Micro-optimize in_task() and in_interrupt()
- Micro-optimize the PSI code
- Avoid updating PSI triggers and ->rtpoll_total when there are no
state changes
Core scheduler infrastructure improvements:
- Use saved_state to reduce some spurious freezer wakeups
- Bring in a handful of fast-headers improvements to scheduler
headers
- Make the scheduler UAPI headers more widely usable by user-space
- Simplify the control flow of scheduler syscalls by using lock
guards
- Fix sched_setaffinity() vs. CPU hotplug race
Scheduler debuggability improvements:
- Disallow writing invalid values to sched_rt_period_us
- Fix a race in the rq-clock debugging code triggering warnings
- Fix a warning in the bandwidth distribution code
- Micro-optimize in_atomic_preempt_off() checks
- Enforce that the tasklist_lock is held in for_each_thread()
- Print the TGID in sched_show_task()
- Remove the /proc/sys/kernel/sched_child_runs_first sysctl
... and misc cleanups & fixes"
* tag 'sched-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (82 commits)
sched/fair: Remove SIS_PROP
sched/fair: Use candidate prev/recent_used CPU if scanning failed for cluster wakeup
sched/fair: Scan cluster before scanning LLC in wake-up path
sched: Add cpus_share_resources API
sched/core: Fix RQCF_ACT_SKIP leak
sched/fair: Remove unused 'curr' argument from pick_next_entity()
sched/nohz: Update comments about NEWILB_KICK
sched/fair: Remove duplicate #include
sched/psi: Update poll => rtpoll in relevant comments
sched: Make PELT acronym definition searchable
sched: Fix stop_one_cpu_nowait() vs hotplug
sched/psi: Bail out early from irq time accounting
sched/topology: Rename 'DIE' domain to 'PKG'
sched/psi: Delete the 'update_total' function parameter from update_triggers()
sched/psi: Avoid updating PSI triggers and ->rtpoll_total when there are no state changes
sched/headers: Remove comment referring to rq::cpu_load, since this has been removed
sched/numa: Complete scanning of inactive VMAs when there is no alternative
sched/numa: Complete scanning of partial VMAs regardless of PID activity
sched/numa: Move up the access pid reset logic
sched/numa: Trace decisions related to skipping VMAs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Info Molnar:
"Futex improvements:
- Add the 'futex2' syscall ABI, which is an attempt to get away from
the multiplex syscall and adds a little room for extentions, while
lifting some limitations.
- Fix futex PI recursive rt_mutex waiter state bug
- Fix inter-process shared futexes on no-MMU systems
- Use folios instead of pages
Micro-optimizations of locking primitives:
- Improve arch_spin_value_unlocked() on asm-generic ticket spinlock
architectures, to improve lockref code generation
- Improve the x86-32 lockref_get_not_zero() main loop by adding
build-time CMPXCHG8B support detection for the relevant lockref
code, and by better interfacing the CMPXCHG8B assembly code with
the compiler
- Introduce arch_sync_try_cmpxchg() on x86 to improve
sync_try_cmpxchg() code generation. Convert some sync_cmpxchg()
users to sync_try_cmpxchg().
- Micro-optimize rcuref_put_slowpath()
Locking debuggability improvements:
- Improve CONFIG_DEBUG_RT_MUTEXES=y to have a fast-path as well
- Enforce atomicity of sched_submit_work(), which is de-facto atomic
but was un-enforced previously.
- Extend <linux/cleanup.h>'s no_free_ptr() with __must_check
semantics
- Fix ww_mutex self-tests
- Clean up const-propagation in <linux/seqlock.h> and simplify the
API-instantiation macros a bit
RT locking improvements:
- Provide the rt_mutex_*_schedule() primitives/helpers and use them
in the rtmutex code to avoid recursion vs. rtlock on the PI state.
- Add nested blocking lockdep asserts to rt_mutex_lock(),
rtlock_lock() and rwbase_read_lock()
.. plus misc fixes & cleanups"
* tag 'locking-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
futex: Don't include process MM in futex key on no-MMU
locking/seqlock: Fix grammar in comment
alpha: Fix up new futex syscall numbers
locking/seqlock: Propagate 'const' pointers within read-only methods, remove forced type casts
locking/lockdep: Fix string sizing bug that triggers a format-truncation compiler-warning
locking/seqlock: Change __seqprop() to return the function pointer
locking/seqlock: Simplify SEQCOUNT_LOCKNAME()
locking/atomics: Use atomic_try_cmpxchg_release() to micro-optimize rcuref_put_slowpath()
locking/atomic, xen: Use sync_try_cmpxchg() instead of sync_cmpxchg()
locking/atomic/x86: Introduce arch_sync_try_cmpxchg()
locking/atomic: Add generic support for sync_try_cmpxchg() and its fallback
locking/seqlock: Fix typo in comment
futex/requeue: Remove unnecessary ‘NULL’ initialization from futex_proxy_trylock_atomic()
locking/local, arch: Rewrite local_add_unless() as a static inline function
locking/debug: Fix debugfs API return value checks to use IS_ERR()
locking/ww_mutex/test: Make sure we bail out instead of livelock
locking/ww_mutex/test: Fix potential workqueue corruption
locking/ww_mutex/test: Use prng instead of rng to avoid hangs at bootup
futex: Add sys_futex_requeue()
futex: Add flags2 argument to futex_requeue()
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode time accessor updates from Christian Brauner:
"This finishes the conversion of all inode time fields to accessor
functions as discussed on list. Changing timestamps manually as we
used to do before is error prone. Using accessors function makes this
robust.
It does not contain the switch of the time fields to discrete 64 bit
integers to replace struct timespec and free up space in struct inode.
But after this, the switch can be trivially made and the patch should
only affect the vfs if we decide to do it"
* tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (86 commits)
fs: rename inode i_atime and i_mtime fields
security: convert to new timestamp accessors
selinux: convert to new timestamp accessors
apparmor: convert to new timestamp accessors
sunrpc: convert to new timestamp accessors
mm: convert to new timestamp accessors
bpf: convert to new timestamp accessors
ipc: convert to new timestamp accessors
linux: convert to new timestamp accessors
zonefs: convert to new timestamp accessors
xfs: convert to new timestamp accessors
vboxsf: convert to new timestamp accessors
ufs: convert to new timestamp accessors
udf: convert to new timestamp accessors
ubifs: convert to new timestamp accessors
tracefs: convert to new timestamp accessors
sysv: convert to new timestamp accessors
squashfs: convert to new timestamp accessors
server: convert to new timestamp accessors
client: convert to new timestamp accessors
...
|
|
Currently, there is no standard implementation for vdso_install,
leading to various issues:
1. Code duplication
Many architectures duplicate similar code just for copying files
to the install destination.
Some architectures (arm, sparc, x86) create build-id symlinks,
introducing more code duplication.
2. Unintended updates of in-tree build artifacts
The vdso_install rule depends on the vdso files to install.
It may update in-tree build artifacts. This can be problematic,
as explained in commit 19514fc665ff ("arm, kbuild: make
"make install" not depend on vmlinux").
3. Broken code in some architectures
Makefile code is often copied from one architecture to another
without proper adaptation.
'make vdso_install' for parisc does not work.
'make vdso_install' for s390 installs vdso64, but not vdso32.
To address these problems, this commit introduces a generic vdso_install
rule.
Architectures that support vdso_install need to define vdso-install-y
in arch/*/Makefile. vdso-install-y lists the files to install.
For example, arch/x86/Makefile looks like this:
vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg
vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg
vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg
vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg
These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix,
if exists, stripped away.
vdso-install-y can optionally take the second field after the colon
separator. This is needed because some architectures install a vdso
file as a different base name.
The following is a snippet from arch/arm64/Makefile.
vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so
This will rename vdso.so.dbg to vdso32.so during installation. If such
architectures change their implementation so that the base names match,
this workaround will go away.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
'x86/amd', 'core' and 's390' into next
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/mac80211/rx.c
91535613b609 ("wifi: mac80211: don't drop all unprotected public action frames")
6c02fab72429 ("wifi: mac80211: split ieee80211_drop_unencrypted_mgmt() return value")
Adjacent changes:
drivers/net/ethernet/apm/xgene/xgene_enet_main.c
61471264c018 ("net: ethernet: apm: Convert to platform remove callback returning void")
d2ca43f30611 ("net: xgene: Fix unused xgene_enet_of_match warning for !CONFIG_OF")
net/vmw_vsock/virtio_transport.c
64c99d2d6ada ("vsock/virtio: support to send non-linear skb")
53b08c498515 ("vsock/virtio: initialize the_virtio_vsock before using VQs")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Its last usage was deleted in commit 4df29d2b9024 ("s390/smp: rework
absolute lowcore access").
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
If the cmma no-dat feature is available the kernel page tables are walked
to identify and mark all pages which are used for address translation (all
region, segment, and page tables). In a subsequent loop all other pages are
marked as "no-dat" pages with the ESSA instruction.
This information is visible to the hypervisor, so that the hypervisor can
optimize purging of guest TLB entries. All pages used for swapper_pg_dir
and invalid_pg_dir are incorrectly marked as no-dat, which in turn can
result in incorrect guest TLB flushes.
Fix this by marking those pages correctly as being used for DAT.
Cc: <stable@vger.kernel.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
If the cmma no-dat feature is available the kernel page tables are walked
to identify and mark all pages which are used for address translation (all
region, segment, and page tables). In a subsequent loop all other pages are
marked as "no-dat" pages with the ESSA instruction.
This information is visible to the hypervisor, so that the hypervisor can
optimize purging of guest TLB entries. The initial loop however is
incorrect: only the first three of the four pages which belong to segment
and region tables will be marked as being used for DAT. The last page is
incorrectly marked as no-dat.
This can result in incorrect guest TLB flushes.
Fix this by simply marking all four pages.
Cc: <stable@vger.kernel.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Function paicrypt_event_init() initializes the PMU device driver
specific details for an event. It is called once per event creation.
The function paicrypt_event_init() is not necessarily executed on
that CPU the event will be used for.
When an event is activated, function paicrypt_start() is used to
start the event on that CPU.
The per CPU data structure struct paicrypt_map has a pointer to
the event which is active for a particular CPU. This pointer is
set in function paicrypt_start() to point to the currently installed
event. There is no need to also set this pointer in function
paicrypt_event_init() where is might be assigned to the wrong CPU.
Therefore remove this assignment in paicrypt_event_init().
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Event count value is initialized and set to zero in function
paicrypt_start(). This function is called once per CPU when an
event is started on that CPU. This leads to event count value
being set to zero as many times as there are online CPUs.
This is not necessary. The event count value is bound to the event
and it is sufficient to initialize the event counter once at
event creation time. This is done when the event structure
is dynamicly allocated with __GFP_ZERO flag. This sets
member count to zero.
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Use define PERF_ATTACH_TASK bit in event->attach_state to determine
system wide invocation or per task invocation in event initialization.
This bit is set in common code and before calling PMU device driver
specific event initialization.
It is set once and never changes. It is save to use and also in
sync with other PMU specific code.
No functional change.
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
If the cmma no-dat feature is available all pages that are not used for
dynamic address translation are marked as "no-dat" with the ESSA
instruction. This information is visible to the hypervisor, so that the
hypervisor can optimize purging of guest TLB entries. This also means that
pages which are used for dynamic address translation must not be marked as
"no-dat", since the hypervisor may then incorrectly not purge guest TLB
entries.
Region, segment, and page tables allocated within the gmap code are
incorrectly marked as "no-dat", since an explicit call to
arch_set_page_dat() is missing, which would remove the "no-dat" mark.
In order to fix this add a new gmap_alloc_crst() function which should
be used to allocate region and segment tables, and which also calls
arch_set_page_dat().
Also add the arch_set_page_dat() call to page_table_alloc_pgste().
Cc: <stable@vger.kernel.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
