summaryrefslogtreecommitdiff
path: root/Documentation/hwmon
AgeCommit message (Collapse)AuthorFilesLines
2023-10-29hwmon: (aquacomputer_d5next) Add support for Aquacomputer High Flow USB and ↵Aleksa Savic1-0/+7
MPS Flow Extend aquacomputer_d5next driver to expose various hardware sensors of the Aquacomputer High Flow USB flow sensor, which communicates through a proprietary USB HID protocol. This commit also adds support for the sensors of the MPS Flow devices, as they have the same USB product ID and sensor layouts. Implemented by Leonard Anderweit [1]. Internal and external temp sensor readings are available, along with the flow sensor. Additionally, serial number and firmware version are exposed through debugfs. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/90 Originally-from: Leonard Anderweit <leonard.anderweit@gmail.com> Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20231016083559.139341-3-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-10-29hwmon: Add driver for ltc2991Antoniu Miclaus2-0/+44
Add support for LTC2991 Octal I2C Voltage, Current, and Temperature Monitor. The LTC2991 is used to monitor system temperatures, voltages and currents. Through the I2C serial interface, the eight monitors can individually measure supply voltages and can be paired for differential measurements of current sense resistors or temperature sensing transistors. Additional measurements include internal temperature and internal VCC. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20231026103413.27800-2-antoniu.miclaus@analog.com [groeck: Fixed up documentation warning] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-10-28hwmon: (asus-ec-sensors) add ROG Crosshair X670E Gene.Ellie Hermaszewska1-0/+1
Only the temp sensors that I can verify are present. T_Sensor is the temperature reading of a 10kΩ β=3435K NTC thermistor optionally connected to the T_SENSOR header. The other sensors are as found on the X670E Hero. Signed-off-by: Ellie Hermaszewska <kernel@monoid.al> Link: https://lore.kernel.org/r/20231026104332.906357-1-kernel@monoid.al Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-10-28hwmon: (max31827) Modify conversion wait timeDaniel Matyas1-2/+2
There is nothing in the datasheet indicating that the 1ms error is needed and I didn't encounter any error during testing with 140ms wait time. Signed-off-by: Daniel Matyas <daniel.matyas@analog.com> Link: https://lore.kernel.org/r/20230919093456.10592-2-daniel.matyas@analog.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-10-28hwmon: (nct6683) Add another customer ID for ASRock X670E TaichiAlexander Koskovich1-0/+1
This value was found on an ASRock X670E Taichi with an NCT6686D chip. Signed-off-by: Alexander Koskovich <akoskovich@pm.me> Link: https://lore.kernel.org/r/20231023182442.21943-1-akoskovich@pm.me Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-10-27hwmon: (adt7475) Add support for Imon readout on ADT7490Timothy Pearson1-1/+2
Add support for the ADT7490's Imon voltage readout. It is handled largely the same way as the existing Vtt readout. Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Co-developed-by: Shawn Anastasio <sanastasio@raptorengineering.com> Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com> Link: https://lore.kernel.org/r/20230914223947.829025-1-tpearson@raptorengineering.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-10-27hwmon: (sch5627) Document behaviour of limit registersArmin Wolf1-0/+10
The values of the limit registers affect the fan speed in a particular way. Document this behaviour so that future users can exploit it if required. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20230907052639.16491-6-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-10-27hwmon: add POWER-Z driverThomas Weißschuh2-0/+31
POWER-Z is a series of devices to monitor power characteristics of USB-C connections and display those on a on-device display. Some of the devices, notably KM002C and KM003C, contain an additional port which exposes the measurements via USB. This is a driver for this monitor port. It was developed and tested with the KM003C. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20230902-powerz-v4-1-7ec2c1440687@weissschuh.net [groeck: Release urb after hwmon registration error; Move priv->status initialization to correct place before reinit_completion ] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-30Merge tag 'docs-6.6' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull documentation updates from Jonathan Corbet: "Documentation work keeps chugging along; this includes: - Work from Carlos Bilbao to integrate rustdoc output into the generated HTML documentation. This took some work to figure out how to do it without slowing the docs build and without creating people who don't have Rust installed, but Carlos got there - Move the loongarch and mips architecture documentation under Documentation/arch/ - Some more maintainer documentation from Jakub ... plus the usual assortment of updates, translations, and fixes" * tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits) Docu: genericirq.rst: fix irq-example input: docs: pxrc: remove reference to phoenix-sim Documentation: serial-console: Fix literal block marker docs/mm: remove references to hmm_mirror ops and clean typos docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add() Documentation: Fix typos Documentation/ABI: Fix typos scripts: kernel-doc: fix macro handling in enums scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN] Documentation: riscv: Update boot image header since EFI stub is supported Documentation: riscv: Add early boot document Documentation: arm: Add bootargs to the table of added DT parameters docs: kernel-parameters: Refer to the correct bitmap function doc: update params of memhp_default_state= docs: Add book to process/kernel-docs.rst docs: sparse: fix invalid link addresses docs: vfs: clean up after the iterate() removal docs: Add a section on surveys to the researcher guidelines docs: move mips under arch docs: move loongarch under arch ...
2023-08-21hwmon: Add driver for Renesas HS3001Andre Werner2-0/+38
Add base support for Renesas HS3001 temperature and humidity sensors and its compatibles HS3002, HS3003 and HS3004. The sensor has a fix I2C address 0x44. The resolution is fixed to 14bit (ref. Missing feature). Missing feature: - Accessing non-volatile memory: Custom board has no possibility to control voltage supply of sensor. Thus, we cannot send the necessary control commands within the first 10ms after power-on. Signed-off-by: Andre Werner <andre.werner@systec-electronic.com> Link: https://lore.kernel.org/r/20230725042207.22310-2-andre.werner@systec-electronic.com [groeck: Cosmetic documentation fixup; added documentation to index; replaced probe_new with probe dropped unused variable] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-21hwmon: Remove smm665 driverGuenter Roeck2-188/+0
SMM665 and related chips are power controller/sequencer chips from Summit Microelectronics. The company was acquired by Qualcomm in 2012, and support for the chip series stopped. The chips are long since gone from active use, making the driver unsupportable and just consuming space and compile time. Remove it. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-21hwmon: (nct6775) Change labels for nct6799Ahmad Khalifa1-1/+10
nct6799d-r and nct6796d-s are very similar and chip_id is only different in the version nibblet. Since both will be detected by the driver anyway due to the chipid mask, they should be labeled together for dmesg msg. Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws> Link: https://lore.kernel.org/r/20230715195244.1334723-1-ahmad@khalifa.ws Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-21hwmon: (pmbus) Update documentation to not use .probe_new() any moreUwe Kleine-König1-1/+1
Since commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") .probe() is the recommended callback to implement an i2c driver (again). Reflect this in the documentation and don't mention .probe_new() which will be dropped soon. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230627064948.593804-1-u.kleine-koenig@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-18Documentation: Fix typosBjorn Helgaas1-1/+1
Fix typos in Documentation. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20230814212822.193684-4-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2023-06-24hwmon: (oxp-sensors) Add support for AOKZOE A1 PROJerrod Frost1-0/+2
This device is an iteration over the AOKZOE A1 with the same EC mapping and features. It also has support for tt_toggle. Signed-off-by: Jerrod Frost <jcfrosty@proton.me> Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com> Link: https://lore.kernel.org/r/20230625012347.121352-2-samsagax@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-24hwmon: (corsair-psu) update Series 2022 and 2023 supportWilken Gottwalt1-5/+8
The series 2022/2023 reports slightly longer vendor/product strings and shares USB ids. Technically the reply size is the USB HID packet size (64 bytes) but all the supported commands do not use more than 8 bytes and replies reporting back strings do not use more then 24 bytes (vendor and product are in one string in the newer devices now). The rest of the reply is always filled with '\0'. Also update comments and documentation accordingly. Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/ZJbB72CAPmLflhHG@monster.localdomain Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-23hwmon: (corsair-psu) various cleanupsWilken Gottwalt1-2/+2
Fix some typos, adjust documentation and comments to current state of knowledge and update coding style to be more uniform. Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/ZJWf3H972hGgLK-8@monster.localdomain Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-22hwmon: (corsair-psu) add support for reading PWM values and modeWilken Gottwalt1-0/+2
Add support for reading PWM values and mode, and update documentation accordingly. Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/ZJSASByXpzoZ0XyH@monster.localdomain Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-17hwmon: (oxp-sensors) Add tt_toggle attribute on supported boardsJoaquín Ignacio Aramendía1-0/+17
OneXPlayer boards from the last generation (both for OneXPlayer and AOK ZOE brands) have a toggle in the EC to switch the "Turbo/Silent" button into a different keyboard event. Add a means to use that "Turbo button takeover" function and expose it to userspace in a custom sysfs `tt_toggle` attribute. It can be read to take the current state. Write 1|0 to activate the function. The specific keycode is dependent on the board but can be checked by running `evtest` utility. Newer BIOS on the OneXPlayer added this function aside from string changes. Add a board enum to differentiate it from the old OneXplayer Mini AMD BIOS. Currently known supported boards: - AOK ZOE A1 - OneXPlayer Mini AMD (only newer BIOS version supported) - OneXPlayer Mini Pro Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com> Link: https://lore.kernel.org/r/20230611143332.40590-2-samsagax@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-17hwmon: (sht3x) Add new non-stardard sysfs attributeJuenKit Yip1-5/+7
Add "repeatability" attribute to sysfs, it could be read or written to control the sensor. Signed-off-by: JuenKit Yip <JuenKit_Yip@hotmail.com> Link: https://lore.kernel.org/r/DB4PR10MB6261B507C7656E3568DA33E39258A@DB4PR10MB6261.EURPRD10.PROD.OUTLOOK.COM [groeck: Fixed multi-line alignment; dropped check of unsigned against < 0] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-17hwmon: (sht3x)replace "high-precision" property to "repeatability"JuenKit Yip1-1/+1
Replace use of "precision" with "repeatability" to match datasheet terminology. No functional change. Signed-off-by: JuenKit Yip <JuenKit_Yip@hotmail.com> Link: https://lore.kernel.org/r/DB4PR10MB626113BFFA66DE32C3479D229258A@DB4PR10MB6261.EURPRD10.PROD.OUTLOOK.COM [groeck: Added commit description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-17hwmon: (sht3x) remove blocking_io propertyJuenKit Yip1-8/+6
Due to no support on clock-strench, blocking mode was removed and now single-shot mode only uses non-blocking mode. Signed-off-by: JuenKit Yip <JuenKit_Yip@hotmail.com> Link: https://lore.kernel.org/r/DB4PR10MB6261DA9202AF37B4F6ECDD6C9258A@DB4PR10MB6261.EURPRD10.PROD.OUTLOOK.COM Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-17hwmon: (sht3x) remove sht3x_platform_dataJuenKit Yip1-1/+1
Since no in-tree driver supports it, sht3x_platform_data has been removed and the relevant properties have been moved to sht3x_data. Signed-off-by: JuenKit Yip <JuenKit_Yip@hotmail.com> Link: https://lore.kernel.org/r/DB4PR10MB626126FB7226D5AF341197449258A@DB4PR10MB6261.EURPRD10.PROD.OUTLOOK.COM Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-10Documentation/hwmon: Fix description of devm_hwmon_device_unregister()Yongsheng Yang1-1/+1
Use devm_hwmon_device_register_with_info to replace hwmon_device_register_with_info in description of devm_hwmon_device_unregister. Signed-off-by: Yongsheng Yang <iyysheng@gmail.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://lore.kernel.org/r/20230609075510.1305-1-iyysheng@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-08hwmon: add HP WMI Sensors driverJames Seo2-0/+141
Hewlett-Packard (and some HP Compaq) business-class computers report hardware monitoring information via WMI. This driver exposes that information to hwmon. Initial support is provided for temperature, fan speed, and intrusion sensor types. Provisional support is provided for voltage and current sensor types. HP's WMI implementation permits many other types of numeric sensors. Therefore, a debugfs interface is also provided to enumerate and inspect all numeric sensors visible on the WMI side. This should facilitate adding support for other sensor types in the future. Tested on a HP Z420, a HP EliteOne 800 G1, and a HP Compaq Elite 8300 SFF. Note that provisionally supported sensor types are untested and seem to be rare-to-nonexistent in the wild, having been encountered neither on test systems nor in ACPI dumps from the Linux Hardware Database. They are included because their popularity in general makes their presence on past or future HP systems plausible and because no doubt exists as to how the sensors themselves would be represented in WMI (alarm attributes will need to wait for hardware to be located). A 2005 HP whitepaper gives the relevant sensor object MOF definition and sensor value scaling calculation, and both this driver and the official HP Performance Advisor utility comply with them (confirmed in the latter case by reverse engineering). Link: https://h20331.www2.hp.com/hpsub/downloads/cmi_whitepaper.pdf Signed-off-by: James Seo <james@equiv.tech> Link: https://lore.kernel.org/r/20230522115645.509701-1-james@equiv.tech [groeck: Set error return value for intrusion writes to -EINVAL. Always accept writes of 0 even if there was no intrusion. ] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-08hwmon: Add MAX31827 driverDaniel Matyas2-0/+91
MAX31827 is a low-power temperature switch with I2C interface. The device is a ±1°C accuracy from -40°C to +125°C (12 bits) local temperature switch and sensor with I2C/SM- Bus interface. The combination of small 6-bump wafer-lev- el package (WLP) and high accuracy makes this temper- ature sensor/switch ideal for a wide range of applications. Signed-off-by: Daniel Matyas <daniel.matyas@analog.com> Link: https://lore.kernel.org/r/20230524160131.14081-2-daniel.matyas@analog.com [groeck: Improved define alignment, return -EINVAL after bad user input, fixed up compatible statement] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-08hwmon: (aht10) Add support for compatible aht20Kirill Yatsenko1-5/+15
Add support for compatible AHT20 temperature/humidity sensor. The only difference between the two is that AHT20 has additional crc8 byte. It seems like AHT15 is also supported by the driver but it wasn't verified and tested yet. Tested on Beaglebone black rev C. Signed-off-by: Kirill Yatsenko <kiriyatsenko@gmail.com> Link: https://lore.kernel.org/r/20230524201912.815993-1-kiriyatsenko@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-08hwmon: (aquacomputer_d5next) Add support for Aquacomputer LeakshieldAleksa Savic1-0/+9
Extend aquacomputer_d5next driver to expose various hardware sensors of the Aquacomputer Leakshield leak prevention system, which communicates through a proprietary USB HID protocol. Implemented by Noah Bergbauer [1]. Two temperature sensors are exposed, along with pressure (current, min, max and target), reservoir volume (total and filled), pump speed and flow. Pump speed and flow values are user provided and allow the Leakshield to optimize its operation. Writing them to the device is subject of future patches. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/41 Originally-from: Noah Bergbauer <main@ehvag.de> Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20230520095447.509287-3-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-08Documentation/hwmon: Move misplaced entry in hwmon docs indexJames Seo1-1/+1
Move the entry for the inspur-ipsps1 driver so that it no longer appears in the hwmon docs TOC as a document relating to the hwmon subsystem itself. Signed-off-by: James Seo <james@equiv.tech> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://lore.kernel.org/r/20230504075752.1320967-2-james@equiv.tech Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-08hwmon: (asus-ec-sensors) add ROG Crosshair X670E Hero.Michael Carns1-0/+1
Only the temp sensors that I can verify are present. HWINFO in Windows shows other accumulated data and statistics (time since installed, total power used, etc) that I have not attempted to find. Signed-off-by: Michael Carns <mike@carns.com> Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20230426200345.65765-1-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-08hwmon: (oxp-sensors) Add AYANEO 2 and Geek modelsJoaquín Ignacio Aramendía1-0/+2
Add support for handhelds with same EC registers - AYANEO 2 - AYANEO GEEK All functionality tests succeed on AYANEO 2 by "pastaq" user on Discord and AYANEO GEEK tested by "oneoc" Discord user. Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com> Link: https://lore.kernel.org/r/20230426184420.99945-1-samsagax@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-21hwmon: (aquacomputer_d5next) Add support for Aquacomputer Aquastream XTAleksa Savic1-0/+5
Extend aquacomputer_d5next driver to expose various hardware sensors of the Aquacomputer Aquastream XT watercooling pump, which communicates through a proprietary USB HID protocol. Implemented by Leonard Anderweit [1] [2]. Coolant temp, fan IC and external temp sensor readings are available, along with speed and voltage of both the pump and optionally connected fan. It also exposes pump current. Additionally, serial number and firmware version are exposed through debugfs. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/46 [2] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/49 Originally-from: Leonard Anderweit <leonard.anderweit@gmail.com> Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20230416181702.9892-1-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19docs: hwmon: Add documentaion for acbel-fsg032 PSULakshmi Yadlapati2-0/+81
Add documentation changes for acbel-fsg032 psu Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com> Link: https://lore.kernel.org/r/20230413132627.3444119-5-lakshmiy@us.ibm.com [groeck: Fixed alphabetic order in index.rst] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19hwmon: (sfctemp) Add StarFive JH71x0 temperature sensorEmil Renner Berthing2-0/+34
Add driver for the StarFive JH71x0 temperature sensor. You can enable/disable it and read temperature in milli Celcius through sysfs. Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Co-developed-by: Samin Guo <samin.guo@starfivetech.com> Signed-off-by: Samin Guo <samin.guo@starfivetech.com> Signed-off-by: Hal Feng <hal.feng@starfivetech.com> Link: https://lore.kernel.org/r/20230321022644.107027-3-hal.feng@starfivetech.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19hwmon: (asus-ec-sensors) add ROG STRIX Z390-F GAMINGEugene Shalygin1-0/+1
The definition comes from a LHM PR [1], and the mutex path from the ACPI dump, kindly provided by the PR author [2] [1] https://github.com/LibreHardwareMonitor/LibreHardwareMonitor/pull/1031 [2] https://github.com/zeule/asus-ec-sensors/issues/36 Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20230405224339.358675-3-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19hwmon: (asus-ec-sensors) add ProArt B550-Creatorfireflame900511-0/+1
Add support for the ASUS ProArt B550-Creator board, was tested with the hardware [1]. [1] https://github.com/zeule/asus-ec-sensors/issues/35 Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Signed-off-by: fireflame90051 <cacoukoulis@gmail.com> Link: https://lore.kernel.org/r/20230405224339.358675-2-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19Documentation/hwmon: Remove description of deprecated registration functionsGuenter Roeck1-44/+16
Remove description of deprecated registration functions from the hardware monitoring kernel API documentation to help ensure that no attempts are made to use them in new drivers. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19docs: hwmon: sysfs-interface: Fix stray colonStefan Wahren1-1/+1
The commit 036d6a4e75c9 ("ABI: sysfs-class-hwmon: add ABI documentation for it") moved all ABI attributes to the usual ABI documentation. But this change left a stray colon for the fan speed control method. Fix this to avoid a confusion of readers. Fixes: 036d6a4e75c9 ("ABI: sysfs-class-hwmon: add ABI documentation for it") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20230312155714.17290-1-stefan.wahren@i2se.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19hwmon: (aquacomputer_d5next) Add fan PWM control for AquaeroLeonard Anderweit1-1/+2
Add the option to control fan PWM on Aquacomputer Aquaero. The Aquaero is the most complex Aquacomputer device, control is therefore more complicated then on already supported devices. Setting PWM requires multiple steps. First, an internal static PWM controller is set to the desired PWM value. Second, the fan is set to use that PWM controller. Last, the minimum and maximum accepted PWM values of the fan are set to allow all possible PWM values. Signed-off-by: Leonard Anderweit <leonard.anderweit@gmail.com> Link: https://lore.kernel.org/r/20230214220221.15003-7-leonard.anderweit@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19hwmon: (aquacomputer_d5next) Add temperature offset control for AquaeroLeonard Anderweit1-2/+2
Adds control over the Aquacomputer Aquaero temperature offset for all eight temperature sensors. Signed-off-by: Leonard Anderweit <leonard.anderweit@gmail.com> Link: https://lore.kernel.org/r/20230214220221.15003-6-leonard.anderweit@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19hwmon: (ftsteutates) Update specifications websiteArmin Wolf1-3/+3
The Fujitsu OEM Mainboard business was acquired by Kontron, so the specifications of the Teutates chip was transferred to the new Kontron FTP server. Update the specifications website accordingly. The outdated sensors how-to was omitted. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20230226014830.10929-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-07hwmon: constify pointers to hwmon_channel_infoKrzysztof Kozlowski1-3/+3
HWmon core receives an array of pointers to hwmon_channel_info and it does not modify it, thus it can be array of const pointers for safety. This allows drivers to make them also const. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-02-22Merge tag 'docs-6.3' of git://git.lwn.net/linuxLinus Torvalds1-3/+3
Pull documentation updates from Jonathan Corbet: "It has been a moderately calm cycle for documentation; the significant changes include: - Some significant additions to the memory-management documentation - Some improvements to navigation in the HTML-rendered docs - More Spanish and Chinese translations ... and the usual set of typo fixes and such" * tag 'docs-6.3' of git://git.lwn.net/linux: (68 commits) Documentation/watchdog/hpwdt: Fix Format Documentation/watchdog/hpwdt: Fix Reference Documentation: core-api: padata: correct spelling docs/mm: Physical Memory: correct spelling in reference to CONFIG_PAGE_EXTENSION docs: Use HTML comments for the kernel-toc SPDX line docs: Add more information to the HTML sidebar Documentation: KVM: Update AMD memory encryption link printk: Document that CONFIG_BOOT_PRINTK_DELAY required for boot_delay= Documentation: userspace-api: correct spelling Documentation: sparc: correct spelling Documentation: driver-api: correct spelling Documentation: admin-guide: correct spelling docs: add workload-tracing document to admin-guide docs/admin-guide/mm: remove useless markup docs/mm: remove useless markup docs/mm: Physical Memory: remove useless markup docs/sp_SP: Add process magic-number translation docs: ftrace: always use canonical ftrace path Doc/damon: fix the data path error dma-buf: Add "dma-buf" to title of documentation ...
2023-02-16hwmon: Deprecate [devm_]hwmon_device_register_with_groupsGuenter Roeck1-1/+1
Even though the hardware monitoring documentation already stated that new drivers should use [devm_]devm_hwmon_device_register_with_info() to register with the hardware monitoring subsystem, we still get submissions for new drivers using the older APIs. There is no benefit to use those APIs. On the contrary, using the older APIs results in substantially larger code size. Explicitly deprecate [devm_]hwmon_device_register_with_groups() to ensure that all new drivers use the latest API. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-02-03hwmon: (aquacomputer_d5next) Add support for Aquacomputer Aquastream UltimateAleksa Savic1-0/+5
Extend aquacomputer_d5next driver to expose various hardware sensors of the Aquacomputer Aquastream Ultimate watercooling pump, which communicates through a proprietary USB HID protocol. Coolant temp and external temp sensor readings are available, along with speed, power, voltage and current of both the pump and optionally connected fan. It also exposes pressure and flow speed readings. Additionally, serial number and firmware version are exposed through debugfs. Tested by a user on Github [1]. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/issues/50 Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20230203120324.579808-1-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-02-03hwmon: (aquacomputer_d5next) Add support for Aquacomputer Poweradjust 3Aleksa Savic1-0/+3
Extend aquacomputer_d5next driver to expose the temp sensor of the Aquacomputer Poweradjust 3 fan controller, which communicates through a proprietary USB HID protocol. The Poweradjust 3 is not currently known to expose firmware version and serial number, so don't create debugfs entries if their values can't be retrieved. Tested by a user on Github [1]. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/issues/57 Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20230131101210.8095-1-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-02-03Docs/hwmon/index: Add missing SPDX License IdentifierSeongJae Park1-0/+2
Add missing SPDX License Identifier for hwmon documentation index file. Signed-off-by: SeongJae Park <sj@kernel.org> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://lore.kernel.org/r/20230122213650.187710-5-sj@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-02-03hwmon: (it87) Updated documentation for recent updates to it87Frank Crawford1-5/+42
Updated the driver documentation to list all current chips and describe the module parameters as per descriptions in the code. Signed-off-by: Frank Crawford <frank@crawford.emu.id.au> Link: https://lore.kernel.org/r/20230128060308.1549707-8-frank@crawford.emu.id.au Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-02-03Documentation: hwmon: correct spellingRandy Dunlap14-17/+17
Correct spelling problems for Documentation/hwmon/ as reported by codespell. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-hwmon@vger.kernel.org Link: https://lore.kernel.org/r/20230129231053.20863-4-rdunlap@infradead.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-02-03hwmon: (pmbus/max16601) Add support for MAX16600Guenter Roeck1-1/+10
From programming perspective, MAX16600 is identical to MAX16601 and MAX16602. Add support for it. Cc: Steve Foreman <foremans@google.com> Cc: Holly Barrett <holly.barrett@analog.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 16:04:53 +0000