diff options
Diffstat (limited to 'drivers/usb/serial/kl5kusb105.c')
| -rw-r--r-- | drivers/usb/serial/kl5kusb105.c | 41 |
1 files changed, 25 insertions, 16 deletions
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 160e19263e25..b3ac045ab408 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -702,12 +702,14 @@ static void klsi_105_set_termios (struct usb_serial_port *port, struct ktermios *old_termios) { struct klsi_105_private *priv = usb_get_serial_port_data(port); - unsigned int iflag = port->tty->termios->c_iflag; + struct tty_struct *tty = port->tty; + unsigned int iflag = tty->termios->c_iflag; unsigned int old_iflag = old_termios->c_iflag; - unsigned int cflag = port->tty->termios->c_cflag; + unsigned int cflag = tty->termios->c_cflag; unsigned int old_cflag = old_termios->c_cflag; struct klsi_105_port_settings cfg; unsigned long flags; + speed_t baud; /* lock while we are modifying the settings */ spin_lock_irqsave (&priv->lock, flags); @@ -715,6 +717,8 @@ static void klsi_105_set_termios (struct usb_serial_port *port, /* * Update baud rate */ + baud = tty_get_baud_rate(tty); + if( (cflag & CBAUD) != (old_cflag & CBAUD) ) { /* reassert DTR and (maybe) RTS on transition from B0 */ if( (old_cflag & CBAUD) == B0 ) { @@ -728,8 +732,8 @@ static void klsi_105_set_termios (struct usb_serial_port *port, mct_u232_set_modem_ctrl(serial, priv->control_state); #endif } - - switch(tty_get_baud_rate(port->tty)) { + } + switch(baud) { case 0: /* handled below */ break; case 1200: @@ -757,25 +761,26 @@ static void klsi_105_set_termios (struct usb_serial_port *port, priv->cfg.baudrate = kl5kusb105a_sio_b115200; break; default: - err("KLSI USB->Serial converter:" + dbg("KLSI USB->Serial converter:" " unsupported baudrate request, using default" " of 9600"); priv->cfg.baudrate = kl5kusb105a_sio_b9600; + baud = 9600; break; - } - if ((cflag & CBAUD) == B0 ) { - dbg("%s: baud is B0", __func__); - /* Drop RTS and DTR */ - /* maybe this should be simulated by sending read - * disable and read enable messages? - */ - ; + } + if ((cflag & CBAUD) == B0 ) { + dbg("%s: baud is B0", __func__); + /* Drop RTS and DTR */ + /* maybe this should be simulated by sending read + * disable and read enable messages? + */ + ; #if 0 - priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); - mct_u232_set_modem_ctrl(serial, priv->control_state); + priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); + mct_u232_set_modem_ctrl(serial, priv->control_state); #endif - } } + tty_encode_baud_rate(tty, baud, baud); if ((cflag & CSIZE) != (old_cflag & CSIZE)) { /* set the number of data bits */ @@ -807,6 +812,8 @@ static void klsi_105_set_termios (struct usb_serial_port *port, if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD)) || (cflag & CSTOPB) != (old_cflag & CSTOPB) ) { + /* Not currently supported */ + tty->termios->c_cflag &= ~(PARENB|PARODD|CSTOPB); #if 0 priv->last_lcr = 0; @@ -834,6 +841,8 @@ static void klsi_105_set_termios (struct usb_serial_port *port, || (iflag & IXON) != (old_iflag & IXON) || (cflag & CRTSCTS) != (old_cflag & CRTSCTS) ) { + /* Not currently supported */ + tty->termios->c_cflag &= ~CRTSCTS; /* Drop DTR/RTS if no flow control otherwise assert */ #if 0 if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS) ) |