diff options
Diffstat (limited to 'drivers/thermal')
| -rw-r--r-- | drivers/thermal/broadcom/bcm2835_thermal.c | 1 | ||||
| -rw-r--r-- | drivers/thermal/cpu_cooling.c | 609 | ||||
| -rw-r--r-- | drivers/thermal/fair_share.c | 1 | ||||
| -rw-r--r-- | drivers/thermal/hisi_thermal.c | 5 | ||||
| -rw-r--r-- | drivers/thermal/imx_thermal.c | 27 | ||||
| -rw-r--r-- | drivers/thermal/int340x_thermal/acpi_thermal_rel.c | 6 | ||||
| -rw-r--r-- | drivers/thermal/int340x_thermal/int3403_thermal.c | 12 | ||||
| -rw-r--r-- | drivers/thermal/step_wise.c | 3 | ||||
| -rw-r--r-- | drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 22 | ||||
| -rw-r--r-- | drivers/thermal/user_space.c | 3 |
10 files changed, 305 insertions, 384 deletions
diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c index 0ecf80890c84..e6863c841662 100644 --- a/drivers/thermal/broadcom/bcm2835_thermal.c +++ b/drivers/thermal/broadcom/bcm2835_thermal.c @@ -245,7 +245,6 @@ static int bcm2835_thermal_probe(struct platform_device *pdev) */ err = tz->ops->get_trip_temp(tz, 0, &trip_temp); if (err < 0) { - err = PTR_ERR(tz); dev_err(&pdev->dev, "Not able to read trip_temp: %d\n", err); diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 69d0f430b2d1..908a8014cf76 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -49,40 +49,45 @@ */ /** - * struct power_table - frequency to power conversion + * struct freq_table - frequency table along with power entries * @frequency: frequency in KHz * @power: power in mW * * This structure is built when the cooling device registers and helps - * in translating frequency to power and viceversa. + * in translating frequency to power and vice versa. */ -struct power_table { +struct freq_table { u32 frequency; u32 power; }; /** + * struct time_in_idle - Idle time stats + * @time: previous reading of the absolute time that this cpu was idle + * @timestamp: wall time of the last invocation of get_cpu_idle_time_us() + */ +struct time_in_idle { + u64 time; + u64 timestamp; +}; + +/** * struct cpufreq_cooling_device - data for cooling device with cpufreq * @id: unique integer value corresponding to each cpufreq_cooling_device * registered. - * @cool_dev: thermal_cooling_device pointer to keep track of the - * registered cooling device. + * @last_load: load measured by the latest call to cpufreq_get_requested_power() * @cpufreq_state: integer value representing the current state of cpufreq * cooling devices. * @clipped_freq: integer value representing the absolute value of the clipped * frequency. * @max_level: maximum cooling level. One less than total number of valid * cpufreq frequencies. - * @allowed_cpus: all the cpus involved for this cpufreq_cooling_device. + * @freq_table: Freq table in descending order of frequencies + * @cdev: thermal_cooling_device pointer to keep track of the + * registered cooling device. + * @policy: cpufreq policy. * @node: list_head to link all cpufreq_cooling_device together. - * @last_load: load measured by the latest call to cpufreq_get_requested_power() - * @time_in_idle: previous reading of the absolute time that this cpu was idle - * @time_in_idle_timestamp: wall time of the last invocation of - * get_cpu_idle_time_us() - * @dyn_power_table: array of struct power_table for frequency to power - * conversion, sorted in ascending order. - * @dyn_power_table_entries: number of entries in the @dyn_power_table array - * @cpu_dev: the first cpu_device from @allowed_cpus that has OPPs registered + * @idle_time: idle time stats * @plat_get_static_power: callback to calculate the static power * * This structure is required for keeping information of each registered @@ -90,81 +95,45 @@ struct power_table { */ struct cpufreq_cooling_device { int id; - struct thermal_cooling_device *cool_dev; + u32 last_load; unsigned int cpufreq_state; unsigned int clipped_freq; unsigned int max_level; - unsigned int *freq_table; /* In descending order */ - struct cpumask allowed_cpus; + struct freq_table *freq_table; /* In descending order */ + struct thermal_cooling_device *cdev; + struct cpufreq_policy *policy; struct list_head node; - u32 last_load; - u64 *time_in_idle; - u64 *time_in_idle_timestamp; - struct power_table *dyn_power_table; - int dyn_power_table_entries; - struct device *cpu_dev; + struct time_in_idle *idle_time; get_static_t plat_get_static_power; }; -static DEFINE_IDA(cpufreq_ida); +static DEFINE_IDA(cpufreq_ida); static DEFINE_MUTEX(cooling_list_lock); -static LIST_HEAD(cpufreq_dev_list); +static LIST_HEAD(cpufreq_cdev_list); /* Below code defines functions to be used for cpufreq as cooling device */ /** * get_level: Find the level for a particular frequency - * @cpufreq_dev: cpufreq_dev for which the property is required + * @cpufreq_cdev: cpufreq_cdev for which the property is required * @freq: Frequency * - * Return: level on success, THERMAL_CSTATE_INVALID on error. + * Return: level corresponding to the frequency. */ -static unsigned long get_level(struct cpufreq_cooling_device *cpufreq_dev, +static unsigned long get_level(struct cpufreq_cooling_device *cpufreq_cdev, unsigned int freq) { + struct freq_table *freq_table = cpufreq_cdev->freq_table; unsigned long level; - for (level = 0; level <= cpufreq_dev->max_level; level++) { - if (freq == cpufreq_dev->freq_table[level]) - return level; - - if (freq > cpufreq_dev->freq_table[level]) + for (level = 1; level <= cpufreq_cdev->max_level; level++) + if (freq > freq_table[level].frequency) break; - } - return THERMAL_CSTATE_INVALID; + return level - 1; } /** - * cpufreq_cooling_get_level - for a given cpu, return the cooling level. - * @cpu: cpu for which the level is required - * @freq: the frequency of interest - * - * This function will match the cooling level corresponding to the - * requested @freq and return it. - * - * Return: The matched cooling level on success or THERMAL_CSTATE_INVALID - * otherwise. - */ -unsigned long cpufreq_cooling_get_level(unsigned int cpu, unsigned int freq) -{ - struct cpufreq_cooling_device *cpufreq_dev; - - mutex_lock(&cooling_list_lock); - list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) { - if (cpumask_test_cpu(cpu, &cpufreq_dev->allowed_cpus)) { - mutex_unlock(&cooling_list_lock); - return get_level(cpufreq_dev, freq); - } - } - mutex_unlock(&cooling_list_lock); - - pr_err("%s: cpu:%d not part of any cooling device\n", __func__, cpu); - return THERMAL_CSTATE_INVALID; -} -EXPORT_SYMBOL_GPL(cpufreq_cooling_get_level); - -/** * cpufreq_thermal_notifier - notifier callback for cpufreq policy change. * @nb: struct notifier_block * with callback info. * @event: value showing cpufreq event for which this function invoked. @@ -181,14 +150,18 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb, { struct cpufreq_policy *policy = data; unsigned long clipped_freq; - struct cpufreq_cooling_device *cpufreq_dev; + struct cpufreq_cooling_device *cpufreq_cdev; if (event != CPUFREQ_ADJUST) return NOTIFY_DONE; mutex_lock(&cooling_list_lock); - list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) { - if (!cpumask_test_cpu(policy->cpu, &cpufreq_dev->allowed_cpus)) + list_for_each_entry(cpufreq_cdev, &cpufreq_cdev_list, node) { + /* + * A new copy of the policy is sent to the notifier and can't + * compare that directly. + */ + if (policy->cpu != cpufreq_cdev->policy->cpu) continue; /* @@ -202,7 +175,7 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb, * But, if clipped_freq is greater than policy->max, we don't * need to do anything. */ - clipped_freq = cpufreq_dev->clipped_freq; + clipped_freq = cpufreq_cdev->clipped_freq; if (policy->max > clipped_freq) cpufreq_verify_within_limits(policy, 0, clipped_freq); @@ -214,63 +187,63 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb, } /** - * build_dyn_power_table() - create a dynamic power to frequency table - * @cpufreq_device: the cpufreq cooling device in which to store the table + * update_freq_table() - Update the freq table with power numbers + * @cpufreq_cdev: the cpufreq cooling device in which to update the table * @capacitance: dynamic power coefficient for these cpus * - * Build a dynamic power to frequency table for this cpu and store it - * in @cpufreq_device. This table will be used in cpu_power_to_freq() and - * cpu_freq_to_power() to convert between power and frequency - * efficiently. Power is stored in mW, frequency in KHz. The - * resulting table is in ascending order. + * Update the freq table with power numbers. This table will be used in + * cpu_power_to_freq() and cpu_freq_to_power() to convert between power and + * frequency efficiently. Power is stored in mW, frequency in KHz. The + * resulting table is in descending order. * * Return: 0 on success, -EINVAL if there are no OPPs for any CPUs, - * -ENOMEM if we run out of memory or -EAGAIN if an OPP was - * added/enabled while the function was executing. + * or -ENOMEM if we run out of memory. */ -static int build_dyn_power_table(struct cpufreq_cooling_device *cpufreq_device, - u32 capacitance) +static int update_freq_table(struct cpufreq_cooling_device *cpufreq_cdev, + u32 capacitance) { - struct power_table *power_table; + struct freq_table *freq_table = cpufreq_cdev->freq_table; struct dev_pm_opp *opp; struct device *dev = NULL; - int num_opps = 0, cpu, i, ret = 0; - unsigned long freq; - - for_each_cpu(cpu, &cpufreq_device->allowed_cpus) { - dev = get_cpu_device(cpu); - if (!dev) { - dev_warn(&cpufreq_device->cool_dev->device, - "No cpu device for cpu %d\n", cpu); - continue; - } + int num_opps = 0, cpu = cpufreq_cdev->policy->cpu, i; - num_opps = dev_pm_opp_get_opp_count(dev); - if (num_opps > 0) - break; - else if (num_opps < 0) - return num_opps; + dev = get_cpu_device(cpu); + if (unlikely(!dev)) { + dev_warn(&cpufreq_cdev->cdev->device, + "No cpu device for cpu %d\n", cpu); + return -ENODEV; } - if (num_opps == 0) - return -EINVAL; + num_opps = dev_pm_opp_get_opp_count(dev); + if (num_opps < 0) + return num_opps; - power_table = kcalloc(num_opps, sizeof(*power_table), GFP_KERNEL); - if (!power_table) - return -ENOMEM; + /* + * The cpufreq table is also built from the OPP table and so the count + * should match. + */ + if (num_opps != cpufreq_cdev->max_level + 1) { + dev_warn(dev, "Number of OPPs not matching with max_levels\n"); + return -EINVAL; + } - for (freq = 0, i = 0; - opp = dev_pm_opp_find_freq_ceil(dev, &freq), !IS_ERR(opp); - freq++, i++) { - u32 freq_mhz, voltage_mv; + for (i = 0; i <= cpufreq_cdev->max_level; i++) { + unsigned long freq = freq_table[i].frequency * 1000; + u32 freq_mhz = freq_table[i].frequency / 1000; u64 power; + u32 voltage_mv; - if (i >= num_opps) { - ret = -EAGAIN; - goto free_power_table; + /* + * Find ceil frequency as 'freq' may be slightly lower than OPP + * freq due to truncation while converting to kHz. + */ + opp = dev_pm_opp_find_freq_ceil(dev, &freq); + if (IS_ERR(opp)) { + dev_err(dev, "failed to get opp for %lu frequency\n", + freq); + return -EINVAL; } - freq_mhz = freq / 1000000; voltage_mv = dev_pm_opp_get_voltage(opp) / 1000; dev_pm_opp_put(opp); @@ -281,89 +254,73 @@ static int build_dyn_power_table(struct cpufreq_cooling_device *cpufreq_device, power = (u64)capacitance * freq_mhz * voltage_mv * voltage_mv; do_div(power, 1000000000); - /* frequency is stored in power_table in KHz */ - power_table[i].frequency = freq / 1000; - /* power is stored in mW */ - power_table[i].power = power; + freq_table[i].power = power; } - if (i != num_opps) { - ret = PTR_ERR(opp); - goto free_power_table; - } - - cpufreq_device->cpu_dev = dev; - cpufreq_device->dyn_power_table = power_table; - cpufreq_device->dyn_power_table_entries = i; - return 0; - -free_power_table: - kfree(power_table); - - return ret; } -static u32 cpu_freq_to_power(struct cpufreq_cooling_device *cpufreq_device, +static u32 cpu_freq_to_power(struct cpufreq_cooling_device *cpufreq_cdev, u32 freq) { int i; - struct power_table *pt = cpufreq_device->dyn_power_table; + struct freq_table *freq_table = cpufreq_cdev->freq_table; - for (i = 1; i < cpufreq_device->dyn_power_table_entries; i++) - if (freq < pt[i].frequency) + for (i = 1; i <= cpufreq_cdev->max_level; i++) + if (freq > freq_table[i].frequency) break; - return pt[i - 1].power; + return freq_table[i - 1].power; } -static u32 cpu_power_to_freq(struct cpufreq_cooling_device *cpufreq_device, +static u32 cpu_power_to_freq(struct cpufreq_cooling_device *cpufreq_cdev, u32 power) { int i; - struct power_table *pt = cpufreq_device->dyn_power_table; + struct freq_table *freq_table = cpufreq_cdev->freq_table; - for (i = 1; i < cpufreq_device->dyn_power_table_entries; i++) - if (power < pt[i].power) + for (i = 1; i <= cpufreq_cdev->max_level; i++) + if (power > freq_table[i].power) break; - return pt[i - 1].frequency; + return freq_table[i - 1].frequency; } /** * get_load() - get load for a cpu since last updated - * @cpufreq_device: &struct cpufreq_cooling_device for this cpu + * @cpufreq_cdev: &struct cpufreq_cooling_device for this cpu * @cpu: cpu number - * @cpu_idx: index of the cpu in cpufreq_device->allowed_cpus + * @cpu_idx: index of the cpu in time_in_idle* * * Return: The average load of cpu @cpu in percentage since this * function was last called. */ -static u32 get_load(struct cpufreq_cooling_device *cpufreq_device, int cpu, +static u32 get_load(struct cpufreq_cooling_device *cpufreq_cdev, int cpu, int cpu_idx) { u32 load; u64 now, now_idle, delta_time, delta_idle; + struct time_in_idle *idle_time = &cpufreq_cdev->idle_time[cpu_idx]; now_idle = get_cpu_idle_time(cpu, &now, 0); - delta_idle = now_idle - cpufreq_device->time_in_idle[cpu_idx]; - delta_time = now - cpufreq_device->time_in_idle_timestamp[cpu_idx]; + delta_idle = now_idle - idle_time->time; + delta_time = now - idle_time->timestamp; if (delta_time <= delta_idle) load = 0; else load = div64_u64(100 * (delta_time - delta_idle), delta_time); - cpufreq_device->time_in_idle[cpu_idx] = now_idle; - cpufreq_device->time_in_idle_timestamp[cpu_idx] = now; + idle_time->time = now_idle; + idle_time->timestamp = now; return load; } /** * get_static_power() - calculate the static power consumed by the cpus - * @cpufreq_device: struct &cpufreq_cooling_device for this cpu cdev + * @cpufreq_cdev: struct &cpufreq_cooling_device for this cpu cdev * @tz: thermal zone device in which we're operating * @freq: frequency in KHz * @power: pointer in which to store the calculated static power @@ -376,26 +333,28 @@ static u32 get_load(struct cpufreq_cooling_device *cpufreq_device, int cpu, * * Return: 0 on success, -E* on failure. */ -static int get_static_power(struct cpufreq_cooling_device *cpufreq_device, +static int get_static_power(struct cpufreq_cooling_device *cpufreq_cdev, struct thermal_zone_device *tz, unsigned long freq, u32 *power) { struct dev_pm_opp *opp; unsigned long voltage; - struct cpumask *cpumask = &cpufreq_device->allowed_cpus; + struct cpufreq_policy *policy = cpufreq_cdev->policy; + struct cpumask *cpumask = policy->related_cpus; unsigned long freq_hz = freq * 1000; + struct device *dev; - if (!cpufreq_device->plat_get_static_power || - !cpufreq_device->cpu_dev) { + if (!cpufreq_cdev->plat_get_static_power) { *power = 0; return 0; } - opp = dev_pm_opp_find_freq_exact(cpufreq_device->cpu_dev, freq_hz, - true); + dev = get_cpu_device(policy->cpu); + WARN_ON(!dev); + + opp = dev_pm_opp_find_freq_exact(dev, freq_hz, true); if (IS_ERR(opp)) { - dev_warn_ratelimited(cpufreq_device->cpu_dev, - "Failed to find OPP for frequency %lu: %ld\n", + dev_warn_ratelimited(dev, "Failed to find OPP for frequency %lu: %ld\n", freq_hz, PTR_ERR(opp)); return -EINVAL; } @@ -404,31 +363,30 @@ static int get_static_power(struct cpufreq_cooling_device *cpufreq_device, dev_pm_opp_put(opp); if (voltage == 0) { - dev_err_ratelimited(cpufreq_device->cpu_dev, - "Failed to get voltage for frequency %lu\n", + dev_err_ratelimited(dev, "Failed to get voltage for frequency %lu\n", freq_hz); return -EINVAL; } - return cpufreq_device->plat_get_static_power(cpumask, tz->passive_delay, - voltage, power); + return cpufreq_cdev->plat_get_static_power(cpumask, tz->passive_delay, + voltage, power); } /** * get_dynamic_power() - calculate the dynamic power - * @cpufreq_device: &cpufreq_cooling_device for this cdev + * @cpufreq_cdev: &cpufreq_cooling_device for this cdev * @freq: current frequency * * Return: the dynamic power consumed by the cpus described by - * @cpufreq_device. + * @cpufreq_cdev. */ -static u32 get_dynamic_power(struct cpufreq_cooling_device *cpufreq_device, +static u32 get_dynamic_power(struct cpufreq_cooling_device *cpufreq_cdev, unsigned long freq) { u32 raw_cpu_power; - raw_cpu_power = cpu_freq_to_power(cpufreq_device, freq); - return (raw_cpu_power * cpufreq_device->last_load) / 100; + raw_cpu_power = cpu_freq_to_power(cpufreq_cdev, freq); + return (raw_cpu_power * cpufreq_cdev->last_load) / 100; } /* cpufreq cooling device callback functions are defined below */ @@ -446,9 +404,9 @@ static u32 get_dynamic_power(struct cpufreq_cooling_device *cpufreq_device, static int cpufreq_get_max_state(struct thermal_cooling_device *cdev, unsigned long *state) { - struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; + struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata; - *state = cpufreq_device->max_level; + *state = cpufreq_cdev->max_level; return 0; } @@ -465,9 +423,9 @@ static int cpufreq_get_max_state(struct thermal_cooling_device *cdev, static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev, unsigned long *state) { - struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; + struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata; - *state = cpufreq_device->cpufreq_state; + *state = cpufreq_cdev->cpufreq_state; return 0; } @@ -485,23 +443,22 @@ static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev, static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state) { - struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; - unsigned int cpu = cpumask_any(&cpufreq_device->allowed_cpus); + struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata; unsigned int clip_freq; /* Request state should be less than max_level */ - if (WARN_ON(state > cpufreq_device->max_level)) + if (WARN_ON(state > cpufreq_cdev->max_level)) return -EINVAL; /* Check if the old cooling action is same as new cooling action */ - if (cpufreq_device->cpufreq_state == state) + if (cpufreq_cdev->cpufreq_state == state) return 0; - clip_freq = cpufreq_device->freq_table[state]; - cpufreq_device->cpufreq_state = state; - cpufreq_device->clipped_freq = clip_freq; + clip_freq = cpufreq_cdev->freq_table[state].frequency; + cpufreq_cdev->cpufreq_state = state; + cpufreq_cdev->clipped_freq = clip_freq; - cpufreq_update_policy(cpu); + cpufreq_update_policy(cpufreq_cdev->policy->cpu); return 0; } @@ -536,33 +493,23 @@ static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev, unsigned long freq; int i = 0, cpu, ret; u32 static_power, dynamic_power, total_load = 0; - struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; + struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata; + struct cpufreq_policy *policy = cpufreq_cdev->policy; u32 *load_cpu = NULL; - cpu = cpumask_any_and(&cpufreq_device->allowed_cpus, cpu_online_mask); - - /* - * All the CPUs are offline, thus the requested power by - * the cdev is 0 - */ - if (cpu >= nr_cpu_ids) { - *power = 0; - return 0; - } - - freq = cpufreq_quick_get(cpu); + freq = cpufreq_quick_get(policy->cpu); if (trace_thermal_power_cpu_get_power_enabled()) { - u32 ncpus = cpumask_weight(&cpufreq_device->allowed_cpus); + u32 ncpus = cpumask_weight(policy->related_cpus); load_cpu = kcalloc(ncpus, sizeof(*load_cpu), GFP_KERNEL); } - for_each_cpu(cpu, &cpufreq_device->allowed_cpus) { + for_each_cpu(cpu, policy->related_cpus) { u32 load; if (cpu_online(cpu)) - load = get_load(cpufreq_device, cpu, i); + load = get_load(cpufreq_cdev, cpu, i); else load = 0; @@ -573,19 +520,19 @@ static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev, i++; } - cpufreq_device->last_load = total_load; + cpufreq_cdev->last_load = total_load; - dynamic_power = get_dynamic_power(cpufreq_device, freq); - ret = get_static_power(cpufreq_device, tz, freq, &static_power); + dynamic_power = get_dynamic_power(cpufreq_cdev, freq); + ret = get_static_power(cpufreq_cdev, tz, freq, &static_power); if (ret) { kfree(load_cpu); return ret; } if (load_cpu) { - trace_thermal_power_cpu_get_power( - &cpufreq_device->allowed_cpus, - freq, load_cpu, i, dynamic_power, static_power); + trace_thermal_power_cpu_get_power(policy->related_cpus, freq, + load_cpu, i, dynamic_power, + static_power); kfree(load_cpu); } @@ -614,38 +561,23 @@ static int cpufreq_state2power(struct thermal_cooling_device *cdev, unsigned long state, u32 *power) { unsigned int freq, num_cpus; - cpumask_var_t cpumask; u32 static_power, dynamic_power; int ret; - struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; - - if (!alloc_cpumask_var(&cpumask, GFP_KERNEL)) - return -ENOMEM; - - cpumask_and(cpumask, &cpufreq_device->allowed_cpus, cpu_online_mask); - num_cpus = cpumask_weight(cpumask); + struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata; - /* None of our cpus are online, so no power */ - if (num_cpus == 0) { - *power = 0; - ret = 0; - goto out; - } + /* Request state should be less than max_level */ + if (WARN_ON(state > cpufreq_cdev->max_level)) + return -EINVAL; - freq = cpufreq_device->freq_table[state]; - if (!freq) { - ret = -EINVAL; - goto out; - } + num_cpus = cpumask_weight(cpufreq_cdev->policy->cpus); - dynamic_power = cpu_freq_to_power(cpufreq_device, freq) * num_cpus; - ret = get_static_power(cpufreq_device, tz, freq, &static_power); + freq = cpufreq_cdev->freq_table[state].frequency; + dynamic_power = cpu_freq_to_power(cpufreq_cdev, freq) * num_cpus; + ret = get_static_power(cpufreq_cdev, tz, freq, &static_power); if (ret) - goto out; + return ret; *power = static_power + dynamic_power; -out: - free_cpumask_var(cpumask); return ret; } @@ -673,39 +605,27 @@ static int cpufreq_power2state(struct thermal_cooling_device *cdev, struct thermal_zone_device *tz, u32 power, unsigned long *state) { - unsigned int cpu, cur_freq, target_freq; + unsigned int cur_freq, target_freq; int ret; s32 dyn_power; u32 last_load, normalised_power, static_power; - struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; + struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata; + struct cpufreq_policy *policy = cpufreq_cdev->policy; - cpu = cpumask_any_and(&cpufreq_device->allowed_cpus, cpu_online_mask); - - /* None of our cpus are online */ - if (cpu >= nr_cpu_ids) - return -ENODEV; - - cur_freq = cpufreq_quick_get(cpu); - ret = get_static_power(cpufreq_device, tz, cur_freq, &static_power); + cur_freq = cpufreq_quick_get(policy->cpu); + ret = get_static_power(cpufreq_cdev, tz, cur_freq, &static_power); if (ret) return ret; dyn_power = power - static_power; dyn_power = dyn_power > 0 ? dyn_power : 0; - last_load = cpufreq_device->last_load ?: 1; + last_load = cpufreq_cdev->last_load ?: 1; normalised_power = (dyn_power * 100) / last_load; - target_freq = cpu_power_to_freq(cpufreq_device, normalised_power); + target_freq = cpu_power_to_freq(cpufreq_cdev, normalised_power); - *state = cpufreq_cooling_get_level(cpu, target_freq); - if (*state == THERMAL_CSTATE_INVALID) { - dev_err_ratelimited(&cdev->device, - "Failed to convert %dKHz for cpu %d into a cdev state\n", - target_freq, cpu); - return -EINVAL; - } - - trace_thermal_power_cpu_limit(&cpufreq_device->allowed_cpus, - target_freq, *state, power); + *state = get_level(cpufreq_cdev, target_freq); + trace_thermal_power_cpu_limit(policy->related_cpus, target_freq, *state, + power); return 0; } @@ -748,7 +668,7 @@ static unsigned int find_next_max(struct cpufreq_frequency_table *table, /** * __cpufreq_cooling_register - helper function to create cpufreq cooling device * @np: a valid struct device_node to the cooling device device tree node - * @clip_cpus: cpumask of cpus where the frequency constraints will happen. + * @policy: cpufreq policy * Normally this should be same as cpufreq policy->related_cpus. * @capacitance: dynamic power coefficient for these cpus * @plat_static_func: function to calculate the static power consumed by these @@ -764,102 +684,68 @@ static unsigned int find_next_max(struct cpufreq_frequency_table *table, */ static struct thermal_cooling_device * __cpufreq_cooling_register(struct device_node *np, - const struct cpumask *clip_cpus, u32 capacitance, + struct cpufreq_policy *policy, u32 capacitance, get_static_t plat_static_func) { - struct cpufreq_policy *policy; - struct thermal_cooling_device *cool_dev; - struct cpufreq_cooling_device *cpufreq_dev; + struct thermal_cooling_device *cdev; + struct cpufreq_cooling_device *cpufreq_cdev; char dev_name[THERMAL_NAME_LENGTH]; - struct cpufreq_frequency_table *pos, *table; - cpumask_var_t temp_mask; unsigned int freq, i, num_cpus; int ret; struct thermal_cooling_device_ops *cooling_ops; bool first; - if (!alloc_cpumask_var(&temp_mask, GFP_KERNEL)) - return ERR_PTR(-ENOMEM); - - cpumask_and(temp_mask, clip_cpus, cpu_online_mask); - policy = cpufreq_cpu_get(cpumask_first(temp_mask)); - if (!policy) { - pr_debug("%s: CPUFreq policy not found\n", __func__); - cool_dev = ERR_PTR(-EPROBE_DEFER); - goto free_cpumask; + if (IS_ERR_OR_NULL(policy)) { + pr_err("%s: cpufreq policy isn't valid: %p", __func__, policy); + return ERR_PTR(-EINVAL); } - table = policy->freq_table; - if (!table) { - pr_debug("%s: CPUFreq table not found\n", __func__); - cool_dev = ERR_PTR(-ENODEV); - goto put_policy; + i = cpufreq_table_count_valid_entries(policy); + if (!i) { + pr_debug("%s: CPUFreq table not found or has no valid entries\n", + __func__); + return ERR_PTR(-ENODEV); } - cpufreq_dev = kzalloc(sizeof(*cpufreq_dev), GFP_KERNEL); - if (!cpufreq_dev) { - cool_dev = ERR_PTR(-ENOMEM); - goto put_policy; - } + cpufreq_cdev = kzalloc(sizeof(*cpufreq_cdev), GFP_KERNEL); + if (!cpufreq_cdev) + return ERR_PTR(-ENOMEM); - num_cpus = cpumask_weight(clip_cpus); - cpufreq_dev->time_in_idle = kcalloc(num_cpus, - sizeof(*cpufreq_dev->time_in_idle), - GFP_KERNEL); - if (!cpufreq_dev->time_in_idle) { - cool_dev = ERR_PTR(-ENOMEM); + cpufreq_cdev->policy = policy; + num_cpus = cpumask_weight(policy->related_cpus); + cpufreq_cdev->idle_time = kcalloc(num_cpus, + sizeof(*cpufreq_cdev->idle_time), + GFP_KERNEL); + if (!cpufreq_cdev->idle_time) { + cdev = ERR_PTR(-ENOMEM); goto free_cdev; } - cpufreq_dev->time_in_idle_timestamp = - kcalloc(num_cpus, sizeof(*cpufreq_dev->time_in_idle_timestamp), - GFP_KERNEL); - if (!cpufreq_dev->time_in_idle_timestamp) { - cool_dev = ERR_PTR(-ENOMEM); - goto free_time_in_idle; - } - - /* Find max levels */ - cpufreq_for_each_valid_entry(pos, table) - cpufreq_dev->max_level++; - - cpufreq_dev->freq_table = kmalloc(sizeof(*cpufreq_dev->freq_table) * - cpufreq_dev->max_level, GFP_KERNEL); - if (!cpufreq_dev->freq_table) { - cool_dev = ERR_PTR(-ENOMEM); - goto free_time_in_idle_timestamp; - } - /* max_level is an index, not a counter */ - cpufreq_dev->max_level--; - - cpumask_copy(&cpufreq_dev->allowed_cpus, clip_cpus); - - if (capacitance) { - cpufreq_dev->plat_get_static_power = plat_static_func; - - ret = build_dyn_power_table(cpufreq_dev, capacitance); - if (ret) { - cool_dev = ERR_PTR(ret); - goto free_table; - } - - cooling_ops = &cpufreq_power_cooling_ops; - } else { - cooling_ops = &cpufreq_cooling_ops; + cpufreq_cdev->max_level = i - 1; + + cpufreq_cdev->freq_table = kmalloc_array(i, + sizeof(*cpufreq_cdev->freq_table), + GFP_KERNEL); + if (!cpufreq_cdev->freq_table) { + cdev = ERR_PTR(-ENOMEM); + goto free_idle_time; } ret = ida_simple_get(&cpufreq_ida, 0, 0, GFP_KERNEL); if (ret < 0) { - cool_dev = ERR_PTR(ret); - goto free_power_table; + cdev = ERR_PTR(ret); + goto free_table; } - cpufreq_dev->id = ret; + cpufreq_cdev->id = ret; + + snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d", + cpufreq_cdev->id); /* Fill freq-table in descending order of frequencies */ - for (i = 0, freq = -1; i <= cpufreq_dev->max_level; i++) { - freq = find_next_max(table, freq); - cpufreq_dev->freq_table[i] = freq; + for (i = 0, freq = -1; i <= cpufreq_cdev->max_level; i++) { + freq = find_next_max(policy->freq_table, freq); + cpufreq_cdev->freq_table[i].frequency = freq; /* Warn for duplicate entries */ if (!freq) @@ -868,51 +754,54 @@ __cpufreq_cooling_register(struct device_node *np, pr_debug("%s: freq:%u KHz\n", __func__, freq); } - snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d", - cpufreq_dev->id); + if (capacitance) { + cpufreq_cdev->plat_get_static_power = plat_static_func; + + ret = update_freq_table(cpufreq_cdev, capacitance); + if (ret) { + cdev = ERR_PTR(ret); + goto remove_ida; + } + + cooling_ops = &cpufreq_power_cooling_ops; + } else { + cooling_ops = &cpufreq_cooling_ops; + } - cool_dev = thermal_of_cooling_device_register(np, dev_name, cpufreq_dev, - cooling_ops); - if (IS_ERR(cool_dev)) + cdev = thermal_of_cooling_device_register(np, dev_name, cpufreq_cdev, + cooling_ops); + if (IS_ERR(cdev)) goto remove_ida; - cpufreq_dev->clipped_freq = cpufreq_dev->freq_table[0]; - cpufreq_dev->cool_dev = cool_dev; + cpufreq_cdev->clipped_freq = cpufreq_cdev->freq_table[0].frequency; + cpufreq_cdev->cdev = cdev; mutex_lock(&cooling_list_lock); /* Register the notifier for first cpufreq cooling device */ - first = list_empty(&cpufreq_dev_list); - list_add(&cpufreq_dev->node, &cpufreq_dev_list); + first = list_empty(&cpufreq_cdev_list); + list_add(&cpufreq_cdev->node, &cpufreq_cdev_list); mutex_unlock(&cooling_list_lock); if (first) cpufreq_register_notifier(&thermal_cpufreq_notifier_block, CPUFREQ_POLICY_NOTIFIER); - goto put_policy; + return cdev; remove_ida: - ida_simple_remove(&cpufreq_ida, cpufreq_dev->id); -free_power_table: - kfree(cpufreq_dev->dyn_power_table); + ida_simple_remove(&cpufreq_ida, cpufreq_cdev->id); free_table: - kfree(cpufreq_dev->freq_table); -free_time_in_idle_timestamp: - kfree(cpufreq_dev->time_in_idle_timestamp); -free_time_in_idle: - kfree(cpufreq_dev->time_in_idle); + kfree(cpufreq_cdev->freq_table); +free_idle_time: + kfree(cpufreq_cdev->idle_time); free_cdev: - kfree(cpufreq_dev); -put_policy: - cpufreq_cpu_put(policy); -free_cpumask: - free_cpumask_var(temp_mask); - return cool_dev; + kfree(cpufreq_cdev); + return cdev; } /** * cpufreq_cooling_register - function to create cpufreq cooling device. - * @clip_cpus: cpumask of cpus where the frequency constraints will happen. + * @policy: cpufreq policy * * This interface function registers the cpufreq cooling device with the name * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq @@ -922,16 +811,16 @@ free_cpumask: * on failure, it returns a corresponding ERR_PTR(). */ struct thermal_cooling_device * -cpufreq_cooling_register(const struct cpumask *clip_cpus) +cpufreq_cooling_register(struct cpufreq_policy *policy) { - return __cpufreq_cooling_register(NULL, clip_cpus, 0, NULL); + return __cpufreq_cooling_register(NULL, policy, 0, NULL); } EXPORT_SYMBOL_GPL(cpufreq_cooling_register); /** * of_cpufreq_cooling_register - function to create cpufreq cooling device. * @np: a valid struct device_node to the cooling device device tree node - * @clip_cpus: cpumask of cpus where the frequency constraints will happen. + * @policy: cpufreq policy * * This interface function registers the cpufreq cooling device with the name * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq @@ -943,18 +832,18 @@ EXPORT_SYMBOL_GPL(cpufreq_cooling_register); */ struct thermal_cooling_device * of_cpufreq_cooling_register(struct device_node *np, - const struct cpumask *clip_cpus) + struct cpufreq_policy *policy) { if (!np) return ERR_PTR(-EINVAL); - return __cpufreq_cooling_register(np, clip_cpus, 0, NULL); + return __cpufreq_cooling_register(np, policy, 0, NULL); } EXPORT_SYMBOL_GPL(of_cpufreq_cooling_register); /** * cpufreq_power_cooling_register() - create cpufreq cooling device with power extensions - * @clip_cpus: cpumask of cpus where the frequency constraints will happen + * @policy: cpufreq policy * @capacitance: dynamic power coefficient for these cpus * @plat_static_func: function to calculate the static power consumed by these * cpus (optional) @@ -974,10 +863,10 @@ EXPORT_SYMBOL_GPL(of_cpufreq_cooling_register); * on failure, it returns a corresponding ERR_PTR(). */ struct thermal_cooling_device * -cpufreq_power_cooling_register(const struct cpumask *clip_cpus, u32 capacitance, +cpufreq_power_cooling_register(struct cpufreq_policy *policy, u32 capacitance, get_static_t plat_static_func) { - return __cpufreq_cooling_register(NULL, clip_cpus, capacitance, + return __cpufreq_cooling_register(NULL, policy, capacitance, plat_static_func); } EXPORT_SYMBOL(cpufreq_power_cooling_register); @@ -985,7 +874,7 @@ EXPORT_SYMBOL(cpufreq_power_cooling_register); /** * of_cpufreq_power_cooling_register() - create cpufreq cooling device with power extensions * @np: a valid struct device_node to the cooling device device tree node - * @clip_cpus: cpumask of cpus where the frequency constraints will happen + * @policy: cpufreq policy * @capacitance: dynamic power coefficient for these cpus * @plat_static_func: function to calculate the static power consumed by these * cpus (optional) @@ -1007,14 +896,14 @@ EXPORT_SYMBOL(cpufreq_power_cooling_register); */ struct thermal_cooling_device * of_cpufreq_power_cooling_register(struct device_node *np, - const struct cpumask *clip_cpus, + struct cpufreq_policy *policy, u32 capacitance, get_static_t plat_static_func) { if (!np) return ERR_PTR(-EINVAL); - return __cpufreq_cooling_register(np, clip_cpus, capacitance, + return __cpufreq_cooling_register(np, policy, capacitance, plat_static_func); } EXPORT_SYMBOL(of_cpufreq_power_cooling_register); @@ -1027,30 +916,28 @@ EXPORT_SYMBOL(of_cpufreq_power_cooling_register); */ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) { - struct cpufreq_cooling_device *cpufreq_dev; + struct cpufreq_cooling_device *cpufreq_cdev; bool last; if (!cdev) return; - cpufreq_dev = cdev->devdata; + cpufreq_cdev = cdev->devdata; mutex_lock(&cooling_list_lock); - list_del(&cpufreq_dev->node); + list_del(&cpufreq_cdev->node); /* Unregister the notifier for the last cpufreq cooling device */ - last = list_empty(&cpufreq_dev_list); + last = list_empty(&cpufreq_cdev_list); mutex_unlock(&cooling_list_lock); if (last) cpufreq_unregister_notifier(&thermal_cpufreq_notifier_block, CPUFREQ_POLICY_NOTIFIER); - thermal_cooling_device_unregister(cpufreq_dev->cool_dev); - ida_simple_remove(&cpufreq_ida, cpufreq_dev->id); - kfree(cpufreq_dev->dyn_power_table); - kfree(cpufreq_dev->time_in_idle_timestamp); - kfree(cpufreq_dev->time_in_idle); - kfree(cpufreq_dev->freq_table); - kfree(cpufreq_dev); + thermal_cooling_device_unregister(cpufreq_cdev->cdev); + ida_simple_remove(&cpufreq_ida, cpufreq_cdev->id); + kfree(cpufreq_cdev->idle_time); + kfree(cpufreq_cdev->freq_table); + kfree(cpufreq_cdev); } EXPORT_SYMBOL_GPL(cpufreq_cooling_unregister); diff --git a/drivers/thermal/fair_share.c b/drivers/thermal/fair_share.c index 68bd1b569118..d3469fbc5207 100644 --- a/drivers/thermal/fair_share.c +++ b/drivers/thermal/fair_share.c @@ -71,6 +71,7 @@ static long get_target_state(struct thermal_zone_device *tz, /** * fair_share_throttle - throttles devices associated with the given zone * @tz - thermal_zone_device + * @trip - trip point index * * Throttling Logic: This uses three parameters to calculate the new * throttle state of the cooling devices associated with the given zone. diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index f6429666a1cf..9c3ce341eb97 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -397,8 +397,11 @@ static int hisi_thermal_suspend(struct device *dev) static int hisi_thermal_resume(struct device *dev) { struct hisi_thermal_data *data = dev_get_drvdata(dev); + int ret; - clk_prepare_enable(data->clk); + ret = clk_prepare_enable(data->clk); + if (ret) + return ret; data->irq_enabled = true; hisi_thermal_enable_bind_irq_sensor(data); diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index fb648a45754e..4798b4b1fd77 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -8,6 +8,7 @@ */ #include <linux/clk.h> +#include <linux/cpufreq.h> #include <linux/cpu_cooling.h> #include <linux/delay.h> #include <linux/device.h> @@ -88,6 +89,7 @@ static struct thermal_soc_data thermal_imx6sx_data = { }; struct imx_thermal_data { + struct cpufreq_policy *policy; struct thermal_zone_device *tz; struct thermal_cooling_device *cdev; enum thermal_device_mode mode; @@ -525,13 +527,18 @@ static int imx_thermal_probe(struct platform_device *pdev) regmap_write(map, MISC0 + REG_SET, MISC0_REFTOP_SELBIASOFF); regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN); - data->cdev = cpufreq_cooling_register(cpu_present_mask); + data->policy = cpufreq_cpu_get(0); + if (!data->policy) { + pr_debug("%s: CPUFreq policy not found\n", __func__); + return -EPROBE_DEFER; + } + + data->cdev = cpufreq_cooling_register(data->policy); if (IS_ERR(data->cdev)) { ret = PTR_ERR(data->cdev); - if (ret != -EPROBE_DEFER) - dev_err(&pdev->dev, - "failed to register cpufreq cooling device: %d\n", - ret); + dev_err(&pdev->dev, + "failed to register cpufreq cooling device: %d\n", ret); + cpufreq_cpu_put(data->policy); return ret; } @@ -542,6 +549,7 @@ static int imx_thermal_probe(struct platform_device *pdev) dev_err(&pdev->dev, "failed to get thermal clk: %d\n", ret); cpufreq_cooling_unregister(data->cdev); + cpufreq_cpu_put(data->policy); return ret; } @@ -556,6 +564,7 @@ static int imx_thermal_probe(struct platform_device *pdev) if (ret) { dev_err(&pdev->dev, "failed to enable thermal clk: %d\n", ret); cpufreq_cooling_unregister(data->cdev); + cpufreq_cpu_put(data->policy); return ret; } @@ -571,6 +580,7 @@ static int imx_thermal_probe(struct platform_device *pdev) "failed to register thermal zone device %d\n", ret); clk_disable_unprepare(data->thermal_clk); cpufreq_cooling_unregister(data->cdev); + cpufreq_cpu_put(data->policy); return ret; } @@ -599,6 +609,7 @@ static int imx_thermal_probe(struct platform_device *pdev) clk_disable_unprepare(data->thermal_clk); thermal_zone_device_unregister(data->tz); cpufreq_cooling_unregister(data->cdev); + cpufreq_cpu_put(data->policy); return ret; } @@ -620,6 +631,7 @@ static int imx_thermal_remove(struct platform_device *pdev) thermal_zone_device_unregister(data->tz); cpufreq_cooling_unregister(data->cdev); + cpufreq_cpu_put(data->policy); return 0; } @@ -648,8 +660,11 @@ static int imx_thermal_resume(struct device *dev) { struct imx_thermal_data *data = dev_get_drvdata(dev); struct regmap *map = data->tempmon; + int ret; - clk_prepare_enable(data->thermal_clk); + ret = clk_prepare_enable(data->thermal_clk); + if (ret) + return ret; /* Enabled thermal sensor after resume */ regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN); regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP); diff --git a/drivers/thermal/int340x_thermal/acpi_thermal_rel.c b/drivers/thermal/int340x_thermal/acpi_thermal_rel.c index 2c2ec7666eb1..51ceb80212a7 100644 --- a/drivers/thermal/int340x_thermal/acpi_thermal_rel.c +++ b/drivers/thermal/int340x_thermal/acpi_thermal_rel.c @@ -62,8 +62,8 @@ static int acpi_thermal_rel_release(struct inode *inode, struct file *file) * acpi_parse_trt - Thermal Relationship Table _TRT for passive cooling * * @handle: ACPI handle of the device contains _TRT - * @art_count: the number of valid entries resulted from parsing _TRT - * @artp: pointer to pointer of array of art entries in parsing result + * @trt_count: the number of valid entries resulted from parsing _TRT + * @trtp: pointer to pointer of array of _TRT entries in parsing result * @create_dev: whether to create platform devices for target and source * */ @@ -208,7 +208,7 @@ int acpi_parse_art(acpi_handle handle, int *art_count, struct art **artp, if (art->target) { result = acpi_bus_get_device(art->target, &adev); if (result) - pr_warn("Failed to get source ACPI device\n"); + pr_warn("Failed to get target ACPI device\n"); } } diff --git a/drivers/thermal/int340x_thermal/int3403_thermal.c b/drivers/thermal/int340x_thermal/int3403_thermal.c index c4890c9437eb..8a7f24dd9315 100644 --- a/drivers/thermal/int340x_thermal/int3403_thermal.c +++ b/drivers/thermal/int340x_thermal/int3403_thermal.c @@ -238,8 +238,16 @@ static int int3403_add(struct platform_device *pdev) status = acpi_evaluate_integer(priv->adev->handle, "PTYP", NULL, &priv->type); if (ACPI_FAILURE(status)) { - result = -EINVAL; - goto err; + unsigned long long tmp; + + status = acpi_evaluate_integer(priv->adev->handle, "_TMP", + NULL, &tmp); + if (ACPI_FAILURE(status)) { + result = -EINVAL; + goto err; + } else { + priv->type = INT3403_TYPE_SENSOR; + } } platform_set_drvdata(pdev, priv); diff --git a/drivers/thermal/step_wise.c b/drivers/thermal/step_wise.c index bcef2e7c4ec9..be95826631b7 100644 --- a/drivers/thermal/step_wise.c +++ b/drivers/thermal/step_wise.c @@ -186,8 +186,7 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip) /** * step_wise_throttle - throttles devices associated with the given zone * @tz - thermal_zone_device - * @trip - the trip point - * @trip_type - type of the trip point + * @trip - trip point index * * Throttling Logic: This uses the trend of the thermal zone to throttle. * If the thermal zone is 'heating up' this throttles all the cooling diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c index 02790f69e26c..c211a8e4a210 100644 --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c @@ -28,6 +28,7 @@ #include <linux/kernel.h> #include <linux/workqueue.h> #include <linux/thermal.h> +#include <linux/cpufreq.h> #include <linux/cpumask.h> #include <linux/cpu_cooling.h> #include <linux/of.h> @@ -37,6 +38,7 @@ /* common data structures */ struct ti_thermal_data { + struct cpufreq_policy *policy; struct thermal_zone_device *ti_thermal; struct thermal_zone_device *pcb_tz; struct thermal_cooling_device *cool_dev; @@ -247,15 +249,19 @@ int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id) if (!data) return -EINVAL; + data->policy = cpufreq_cpu_get(0); + if (!data->policy) { + pr_debug("%s: CPUFreq policy not found\n", __func__); + return -EPROBE_DEFER; + } + /* Register cooling device */ - data->cool_dev = cpufreq_cooling_register(cpu_present_mask); + data->cool_dev = cpufreq_cooling_register(data->policy); if (IS_ERR(data->cool_dev)) { int ret = PTR_ERR(data->cool_dev); - - if (ret != -EPROBE_DEFER) - dev_err(bgp->dev, - "Failed to register cpu cooling device %d\n", - ret); + dev_err(bgp->dev, "Failed to register cpu cooling device %d\n", + ret); + cpufreq_cpu_put(data->policy); return ret; } @@ -270,8 +276,10 @@ int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id) data = ti_bandgap_get_sensor_data(bgp, id); - if (data) + if (data) { cpufreq_cooling_unregister(data->cool_dev); + cpufreq_cpu_put(data->policy); + } return 0; } diff --git a/drivers/thermal/user_space.c b/drivers/thermal/user_space.c index c908150c268d..8e92a06ef48a 100644 --- a/drivers/thermal/user_space.c +++ b/drivers/thermal/user_space.c @@ -24,12 +24,13 @@ #include <linux/thermal.h> #include <linux/slab.h> + #include "thermal_core.h" /** * notify_user_space - Notifies user space about thermal events * @tz - thermal_zone_device - * @trip - Trip point index + * @trip - trip point index * * This function notifies the user space through UEvents. */ |