diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_hw.h')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_hw.h | 65 |
1 files changed, 50 insertions, 15 deletions
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 1ea565e0561f..54d04188f7cc 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2005 Emulex. All rights reserved. * + * Copyright (C) 2004-2006 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * @@ -454,10 +454,13 @@ struct serv_parm { /* Structure is in Big Endian format */ #define ELS_CMD_ADISC 0x52000000 #define ELS_CMD_FARP 0x54000000 #define ELS_CMD_FARPR 0x55000000 +#define ELS_CMD_RPS 0x56000000 +#define ELS_CMD_RPL 0x57000000 #define ELS_CMD_FAN 0x60000000 #define ELS_CMD_RSCN 0x61040000 #define ELS_CMD_SCR 0x62000000 #define ELS_CMD_RNID 0x78000000 +#define ELS_CMD_LIRR 0x7A000000 #else /* __LITTLE_ENDIAN_BITFIELD */ #define ELS_CMD_MASK 0xffff #define ELS_RSP_MASK 0xff @@ -486,10 +489,13 @@ struct serv_parm { /* Structure is in Big Endian format */ #define ELS_CMD_ADISC 0x52 #define ELS_CMD_FARP 0x54 #define ELS_CMD_FARPR 0x55 +#define ELS_CMD_RPS 0x56 +#define ELS_CMD_RPL 0x57 #define ELS_CMD_FAN 0x60 #define ELS_CMD_RSCN 0x0461 #define ELS_CMD_SCR 0x62 #define ELS_CMD_RNID 0x78 +#define ELS_CMD_LIRR 0x7A #endif /* @@ -758,12 +764,40 @@ typedef struct _RNID { /* Structure is in Big Endian format */ } un; } RNID; -typedef struct _RRQ { /* Structure is in Big Endian format */ - uint32_t SID; - uint16_t Oxid; - uint16_t Rxid; - uint8_t resv[32]; /* optional association hdr */ -} RRQ; +typedef struct _RPS { /* Structure is in Big Endian format */ + union { + uint32_t portNum; + struct lpfc_name portName; + } un; +} RPS; + +typedef struct _RPS_RSP { /* Structure is in Big Endian format */ + uint16_t rsvd1; + uint16_t portStatus; + uint32_t linkFailureCnt; + uint32_t lossSyncCnt; + uint32_t lossSignalCnt; + uint32_t primSeqErrCnt; + uint32_t invalidXmitWord; + uint32_t crcCnt; +} RPS_RSP; + +typedef struct _RPL { /* Structure is in Big Endian format */ + uint32_t maxsize; + uint32_t index; +} RPL; + +typedef struct _PORT_NUM_BLK { + uint32_t portNum; + uint32_t portID; + struct lpfc_name portName; +} PORT_NUM_BLK; + +typedef struct _RPL_RSP { /* Structure is in Big Endian format */ + uint32_t listLen; + uint32_t index; + PORT_NUM_BLK port_num_blk; +} RPL_RSP; /* This is used for RSCN command */ typedef struct _D_ID { /* Structure is in Big Endian format */ @@ -804,7 +838,6 @@ typedef struct _ELS_PKT { /* Structure is in Big Endian format */ FARP farp; /* Payload for FARP/ACC */ FAN fan; /* Payload for FAN */ SCR scr; /* Payload for SCR/ACC */ - RRQ rrq; /* Payload for RRQ */ RNID rnid; /* Payload for RNID */ uint8_t pad[128 - 4]; /* Pad out to payload of 128 bytes */ } un; @@ -1200,7 +1233,9 @@ typedef struct { /* FireFly BIU registers */ #define MBX_SET_MASK 0x20 #define MBX_SET_SLIM 0x21 #define MBX_UNREG_D_ID 0x23 +#define MBX_KILL_BOARD 0x24 #define MBX_CONFIG_FARP 0x25 +#define MBX_BEACON 0x2A #define MBX_LOAD_AREA 0x81 #define MBX_RUN_BIU_DIAG64 0x84 @@ -1676,13 +1711,13 @@ typedef struct { uint32_t rttov; uint32_t altov; uint32_t lmt; -#define LMT_RESERVED 0x0 /* Not used */ -#define LMT_266_10bit 0x1 /* 265.625 Mbaud 10 bit iface */ -#define LMT_532_10bit 0x2 /* 531.25 Mbaud 10 bit iface */ -#define LMT_1063_20bit 0x3 /* 1062.5 Mbaud 20 bit iface */ -#define LMT_1063_10bit 0x4 /* 1062.5 Mbaud 10 bit iface */ -#define LMT_2125_10bit 0x8 /* 2125 Mbaud 10 bit iface */ -#define LMT_4250_10bit 0x40 /* 4250 Mbaud 10 bit iface */ +#define LMT_RESERVED 0x000 /* Not used */ +#define LMT_1Gb 0x004 +#define LMT_2Gb 0x008 +#define LMT_4Gb 0x040 +#define LMT_8Gb 0x080 +#define LMT_10Gb 0x100 + uint32_t rsvd2; uint32_t rsvd3; |