diff options
Diffstat (limited to 'drivers/of')
| -rw-r--r-- | drivers/of/Makefile | 6 | ||||
| -rw-r--r-- | drivers/of/address.c | 8 | ||||
| -rw-r--r-- | drivers/of/base.c | 328 | ||||
| -rw-r--r-- | drivers/of/device.c | 7 | ||||
| -rw-r--r-- | drivers/of/dynamic.c | 23 | ||||
| -rw-r--r-- | drivers/of/fdt.c | 40 | ||||
| -rw-r--r-- | drivers/of/irq.c | 14 | ||||
| -rw-r--r-- | drivers/of/kexec.c | 458 | ||||
| -rw-r--r-- | drivers/of/of_net.c | 3 | ||||
| -rw-r--r-- | drivers/of/of_reserved_mem.c | 6 | ||||
| -rw-r--r-- | drivers/of/overlay.c | 19 | ||||
| -rw-r--r-- | drivers/of/platform.c | 12 | ||||
| -rw-r--r-- | drivers/of/property.c | 72 | ||||
| -rw-r--r-- | drivers/of/unittest-data/Makefile | 48 | ||||
| -rw-r--r-- | drivers/of/unittest-data/overlay_base.dts | 90 | ||||
| -rw-r--r-- | drivers/of/unittest-data/overlay_common.dtsi | 91 | ||||
| -rw-r--r-- | drivers/of/unittest-data/static_base_1.dts | 4 | ||||
| -rw-r--r-- | drivers/of/unittest-data/static_base_2.dts | 4 | ||||
| -rw-r--r-- | drivers/of/unittest-data/testcases.dts | 23 | ||||
| -rw-r--r-- | drivers/of/unittest-data/testcases_common.dtsi | 19 | ||||
| -rw-r--r-- | drivers/of/unittest-data/tests-interrupts.dtsi | 11 |
21 files changed, 937 insertions, 349 deletions
diff --git a/drivers/of/Makefile b/drivers/of/Makefile index 6e1e5212f058..c13b982084a3 100644 --- a/drivers/of/Makefile +++ b/drivers/of/Makefile @@ -14,4 +14,10 @@ obj-$(CONFIG_OF_RESOLVE) += resolver.o obj-$(CONFIG_OF_OVERLAY) += overlay.o obj-$(CONFIG_OF_NUMA) += of_numa.o +ifdef CONFIG_KEXEC_FILE +ifdef CONFIG_OF_FLATTREE +obj-y += kexec.o +endif +endif + obj-$(CONFIG_OF_UNITTEST) += unittest-data/ diff --git a/drivers/of/address.c b/drivers/of/address.c index a2373fa4a571..aca94c348bd4 100644 --- a/drivers/of/address.c +++ b/drivers/of/address.c @@ -117,9 +117,12 @@ static unsigned int of_bus_pci_get_flags(const __be32 *addr) flags |= IORESOURCE_IO; break; case 0x02: /* 32 bits */ - case 0x03: /* 64 bits */ flags |= IORESOURCE_MEM; break; + + case 0x03: /* 64 bits */ + flags |= IORESOURCE_MEM | IORESOURCE_MEM_64; + break; } if (w & 0x40000000) flags |= IORESOURCE_PREFETCH; @@ -861,6 +864,9 @@ static int __of_address_to_resource(struct device_node *dev, /** * of_address_to_resource - Translate device tree address and return as resource + * @dev: Caller's Device Node + * @index: Index into the array + * @r: Pointer to resource array * * Note that if your address is a PIO address, the conversion will fail if * the physical address can't be internally converted to an IO token with diff --git a/drivers/of/base.c b/drivers/of/base.c index 8a348f0d3c5e..48e941f99558 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -244,7 +244,7 @@ struct device_node *__of_find_all_nodes(struct device_node *prev) * @prev: Previous node or NULL to start iteration * of_node_put() will be called on it * - * Returns a node pointer with refcount incremented, use + * Return: A node pointer with refcount incremented, use * of_node_put() on it when done. */ struct device_node *of_find_all_nodes(struct device_node *prev) @@ -305,7 +305,7 @@ bool __weak arch_match_cpu_phys_id(int cpu, u64 phys_id) return (u32)phys_id == cpu; } -/** +/* * Checks if the given "prop_name" property holds the physical id of the * core/thread corresponding to the logical cpu 'cpu'. If 'thread' is not * NULL, local thread number within the core is returned in it. @@ -374,7 +374,7 @@ bool __weak arch_find_n_match_cpu_physical_id(struct device_node *cpun, * before booting secondary cores. This function uses arch_match_cpu_phys_id * which can be overridden by architecture specific implementation. * - * Returns a node pointer for the logical cpu with refcount incremented, use + * Return: A node pointer for the logical cpu with refcount incremented, use * of_node_put() on it when done. Returns NULL if not found. */ struct device_node *of_get_cpu_node(int cpu, unsigned int *thread) @@ -394,8 +394,8 @@ EXPORT_SYMBOL(of_get_cpu_node); * * @cpu_node: Pointer to the device_node for CPU. * - * Returns the logical CPU number of the given CPU device_node. - * Returns -ENODEV if the CPU is not found. + * Return: The logical CPU number of the given CPU device_node or -ENODEV if the + * CPU is not found. */ int of_cpu_node_to_id(struct device_node *cpu_node) { @@ -427,7 +427,7 @@ EXPORT_SYMBOL(of_cpu_node_to_id); * bindings. This function check for both and returns the idle state node for * the requested index. * - * In case an idle state node is found at @index, the refcount is incremented + * Return: An idle state node if found at @index. The refcount is incremented * for it, so call of_node_put() on it when done. Returns NULL if not found. */ struct device_node *of_get_cpu_state_node(struct device_node *cpu_node, @@ -561,7 +561,7 @@ int of_device_compatible_match(struct device_node *device, * of_machine_is_compatible - Test root of device tree for a given compatible value * @compat: compatible string to look for in root node's compatible property. * - * Returns a positive integer if the root node has the given value in its + * Return: A positive integer if the root node has the given value in its * compatible property. */ int of_machine_is_compatible(const char *compat) @@ -583,7 +583,7 @@ EXPORT_SYMBOL(of_machine_is_compatible); * * @device: Node to check for availability, with locks already held * - * Returns true if the status property is absent or set to "okay" or "ok", + * Return: True if the status property is absent or set to "okay" or "ok", * false otherwise */ static bool __of_device_is_available(const struct device_node *device) @@ -611,7 +611,7 @@ static bool __of_device_is_available(const struct device_node *device) * * @device: Node to check for availability * - * Returns true if the status property is absent or set to "okay" or "ok", + * Return: True if the status property is absent or set to "okay" or "ok", * false otherwise */ bool of_device_is_available(const struct device_node *device) @@ -632,7 +632,7 @@ EXPORT_SYMBOL(of_device_is_available); * * @device: Node to check for endianness * - * Returns true if the device has a "big-endian" property, or if the kernel + * Return: True if the device has a "big-endian" property, or if the kernel * was compiled for BE *and* the device has a "native-endian" property. * Returns false otherwise. * @@ -651,11 +651,11 @@ bool of_device_is_big_endian(const struct device_node *device) EXPORT_SYMBOL(of_device_is_big_endian); /** - * of_get_parent - Get a node's parent if any - * @node: Node to get parent + * of_get_parent - Get a node's parent if any + * @node: Node to get parent * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. + * Return: A node pointer with refcount incremented, use + * of_node_put() on it when done. */ struct device_node *of_get_parent(const struct device_node *node) { @@ -673,15 +673,15 @@ struct device_node *of_get_parent(const struct device_node *node) EXPORT_SYMBOL(of_get_parent); /** - * of_get_next_parent - Iterate to a node's parent - * @node: Node to get parent of + * of_get_next_parent - Iterate to a node's parent + * @node: Node to get parent of * - * This is like of_get_parent() except that it drops the - * refcount on the passed node, making it suitable for iterating - * through a node's parents. + * This is like of_get_parent() except that it drops the + * refcount on the passed node, making it suitable for iterating + * through a node's parents. * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. + * Return: A node pointer with refcount incremented, use + * of_node_put() on it when done. */ struct device_node *of_get_next_parent(struct device_node *node) { @@ -719,13 +719,13 @@ static struct device_node *__of_get_next_child(const struct device_node *node, child = __of_get_next_child(parent, child)) /** - * of_get_next_child - Iterate a node childs - * @node: parent node - * @prev: previous child of the parent node, or NULL to get first + * of_get_next_child - Iterate a node childs + * @node: parent node + * @prev: previous child of the parent node, or NULL to get first * - * Returns a node pointer with refcount incremented, use of_node_put() on - * it when done. Returns NULL when prev is the last child. Decrements the - * refcount of prev. + * Return: A node pointer with refcount incremented, use of_node_put() on + * it when done. Returns NULL when prev is the last child. Decrements the + * refcount of prev. */ struct device_node *of_get_next_child(const struct device_node *node, struct device_node *prev) @@ -741,12 +741,12 @@ struct device_node *of_get_next_child(const struct device_node *node, EXPORT_SYMBOL(of_get_next_child); /** - * of_get_next_available_child - Find the next available child node - * @node: parent node - * @prev: previous child of the parent node, or NULL to get first + * of_get_next_available_child - Find the next available child node + * @node: parent node + * @prev: previous child of the parent node, or NULL to get first * - * This function is like of_get_next_child(), except that it - * automatically skips any disabled nodes (i.e. status = "disabled"). + * This function is like of_get_next_child(), except that it + * automatically skips any disabled nodes (i.e. status = "disabled"). */ struct device_node *of_get_next_available_child(const struct device_node *node, struct device_node *prev) @@ -772,12 +772,12 @@ struct device_node *of_get_next_available_child(const struct device_node *node, EXPORT_SYMBOL(of_get_next_available_child); /** - * of_get_next_cpu_node - Iterate on cpu nodes - * @prev: previous child of the /cpus node, or NULL to get first + * of_get_next_cpu_node - Iterate on cpu nodes + * @prev: previous child of the /cpus node, or NULL to get first * - * Returns a cpu node pointer with refcount incremented, use of_node_put() - * on it when done. Returns NULL when prev is the last child. Decrements - * the refcount of prev. + * Return: A cpu node pointer with refcount incremented, use of_node_put() + * on it when done. Returns NULL when prev is the last child. Decrements + * the refcount of prev. */ struct device_node *of_get_next_cpu_node(struct device_node *prev) { @@ -816,7 +816,7 @@ EXPORT_SYMBOL(of_get_next_cpu_node); * Lookup child node whose compatible property contains the given compatible * string. * - * Returns a node pointer with refcount incremented, use of_node_put() on it + * Return: a node pointer with refcount incremented, use of_node_put() on it * when done; or NULL if not found. */ struct device_node *of_get_compatible_child(const struct device_node *parent, @@ -834,15 +834,15 @@ struct device_node *of_get_compatible_child(const struct device_node *parent, EXPORT_SYMBOL(of_get_compatible_child); /** - * of_get_child_by_name - Find the child node by name for a given parent - * @node: parent node - * @name: child name to look for. + * of_get_child_by_name - Find the child node by name for a given parent + * @node: parent node + * @name: child name to look for. * - * This function looks for child node for given matching name + * This function looks for child node for given matching name * - * Returns a node pointer if found, with refcount incremented, use - * of_node_put() on it when done. - * Returns NULL if node is not found. + * Return: A node pointer if found, with refcount incremented, use + * of_node_put() on it when done. + * Returns NULL if node is not found. */ struct device_node *of_get_child_by_name(const struct device_node *node, const char *name) @@ -893,22 +893,22 @@ struct device_node *__of_find_node_by_full_path(struct device_node *node, } /** - * of_find_node_opts_by_path - Find a node matching a full OF path - * @path: Either the full path to match, or if the path does not - * start with '/', the name of a property of the /aliases - * node (an alias). In the case of an alias, the node - * matching the alias' value will be returned. - * @opts: Address of a pointer into which to store the start of - * an options string appended to the end of the path with - * a ':' separator. - * - * Valid paths: - * /foo/bar Full path - * foo Valid alias - * foo/bar Valid alias + relative path - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. + * of_find_node_opts_by_path - Find a node matching a full OF path + * @path: Either the full path to match, or if the path does not + * start with '/', the name of a property of the /aliases + * node (an alias). In the case of an alias, the node + * matching the alias' value will be returned. + * @opts: Address of a pointer into which to store the start of + * an options string appended to the end of the path with + * a ':' separator. + * + * Valid paths: + * * /foo/bar Full path + * * foo Valid alias + * * foo/bar Valid alias + relative path + * + * Return: A node pointer with refcount incremented, use + * of_node_put() on it when done. */ struct device_node *of_find_node_opts_by_path(const char *path, const char **opts) { @@ -958,15 +958,15 @@ struct device_node *of_find_node_opts_by_path(const char *path, const char **opt EXPORT_SYMBOL(of_find_node_opts_by_path); /** - * of_find_node_by_name - Find a node by its "name" property - * @from: The node to start searching from or NULL; the node + * of_find_node_by_name - Find a node by its "name" property + * @from: The node to start searching from or NULL; the node * you pass will not be searched, only the next one * will. Typically, you pass what the previous call * returned. of_node_put() will be called on @from. - * @name: The name string to match against + * @name: The name string to match against * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. + * Return: A node pointer with refcount incremented, use + * of_node_put() on it when done. */ struct device_node *of_find_node_by_name(struct device_node *from, const char *name) @@ -985,16 +985,16 @@ struct device_node *of_find_node_by_name(struct device_node *from, EXPORT_SYMBOL(of_find_node_by_name); /** - * of_find_node_by_type - Find a node by its "device_type" property - * @from: The node to start searching from, or NULL to start searching + * of_find_node_by_type - Find a node by its "device_type" property + * @from: The node to start searching from, or NULL to start searching * the entire device tree. The node you pass will not be * searched, only the next one will; typically, you pass * what the previous call returned. of_node_put() will be * called on from for you. - * @type: The type string to match against + * @type: The type string to match against * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. + * Return: A node pointer with refcount incremented, use + * of_node_put() on it when done. */ struct device_node *of_find_node_by_type(struct device_node *from, const char *type) @@ -1013,18 +1013,18 @@ struct device_node *of_find_node_by_type(struct device_node *from, EXPORT_SYMBOL(of_find_node_by_type); /** - * of_find_compatible_node - Find a node based on type and one of the + * of_find_compatible_node - Find a node based on type and one of the * tokens in its "compatible" property - * @from: The node to start searching from or NULL, the node - * you pass will not be searched, only the next one - * will; typically, you pass what the previous call - * returned. of_node_put() will be called on it - * @type: The type string to match "device_type" or NULL to ignore - * @compatible: The string to match to one of the tokens in the device - * "compatible" list. - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. + * @from: The node to start searching from or NULL, the node + * you pass will not be searched, only the next one + * will; typically, you pass what the previous call + * returned. of_node_put() will be called on it + * @type: The type string to match "device_type" or NULL to ignore + * @compatible: The string to match to one of the tokens in the device + * "compatible" list. + * + * Return: A node pointer with refcount incremented, use + * of_node_put() on it when done. */ struct device_node *of_find_compatible_node(struct device_node *from, const char *type, const char *compatible) @@ -1044,16 +1044,16 @@ struct device_node *of_find_compatible_node(struct device_node *from, EXPORT_SYMBOL(of_find_compatible_node); /** - * of_find_node_with_property - Find a node which has a property with - * the given name. - * @from: The node to start searching from or NULL, the node - * you pass will not be searched, only the next one - * will; typically, you pass what the previous call - * returned. of_node_put() will be called on it - * @prop_name: The name of the property to look for. - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. + * of_find_node_with_property - Find a node which has a property with + * the given name. + * @from: The node to start searching from or NULL, the node + * you pass will not be searched, only the next one + * will; typically, you pass what the previous call + * returned. of_node_put() will be called on it + * @prop_name: The name of the property to look for. + * + * Return: A node pointer with refcount incremented, use + * of_node_put() on it when done. */ struct device_node *of_find_node_with_property(struct device_node *from, const char *prop_name) @@ -1102,10 +1102,10 @@ const struct of_device_id *__of_match_node(const struct of_device_id *matches, /** * of_match_node - Tell if a device_node has a matching of_match structure - * @matches: array of of device match structures to search in - * @node: the of device structure to match against + * @matches: array of of device match structures to search in + * @node: the of device structure to match against * - * Low level utility function used by device matching. + * Low level utility function used by device matching. */ const struct of_device_id *of_match_node(const struct of_device_id *matches, const struct device_node *node) @@ -1121,17 +1121,17 @@ const struct of_device_id *of_match_node(const struct of_device_id *matches, EXPORT_SYMBOL(of_match_node); /** - * of_find_matching_node_and_match - Find a node based on an of_device_id - * match table. - * @from: The node to start searching from or NULL, the node - * you pass will not be searched, only the next one - * will; typically, you pass what the previous call - * returned. of_node_put() will be called on it - * @matches: array of of device match structures to search in - * @match Updated to point at the matches entry which matched - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. + * of_find_matching_node_and_match - Find a node based on an of_device_id + * match table. + * @from: The node to start searching from or NULL, the node + * you pass will not be searched, only the next one + * will; typically, you pass what the previous call + * returned. of_node_put() will be called on it + * @matches: array of of device match structures to search in + * @match: Updated to point at the matches entry which matched + * + * Return: A node pointer with refcount incremented, use + * of_node_put() on it when done. */ struct device_node *of_find_matching_node_and_match(struct device_node *from, const struct of_device_id *matches, @@ -1170,7 +1170,7 @@ EXPORT_SYMBOL(of_find_matching_node_and_match); * It does this by stripping the manufacturer prefix (as delimited by a ',') * from the first entry in the compatible list property. * - * This routine returns 0 on success, <0 on failure. + * Return: This routine returns 0 on success, <0 on failure. */ int of_modalias_node(struct device_node *node, char *modalias, int len) { @@ -1190,7 +1190,7 @@ EXPORT_SYMBOL_GPL(of_modalias_node); * of_find_node_by_phandle - Find a node given a phandle * @handle: phandle of the node to find * - * Returns a node pointer with refcount incremented, use + * Return: A node pointer with refcount incremented, use * of_node_put() on it when done. */ struct device_node *of_find_node_by_phandle(phandle handle) @@ -1426,7 +1426,7 @@ static int __of_parse_phandle_with_args(const struct device_node *np, * @index: For properties holding a table of phandles, this is the index into * the table * - * Returns the device_node pointer with refcount incremented. Use + * Return: The device_node pointer with refcount incremented. Use * of_node_put() on it when done. */ struct device_node *of_parse_phandle(const struct device_node *np, @@ -1460,21 +1460,21 @@ EXPORT_SYMBOL(of_parse_phandle); * Caller is responsible to call of_node_put() on the returned out_args->np * pointer. * - * Example: + * Example:: * - * phandle1: node1 { + * phandle1: node1 { * #list-cells = <2>; - * } + * }; * - * phandle2: node2 { + * phandle2: node2 { * #list-cells = <1>; - * } + * }; * - * node3 { + * node3 { * list = <&phandle1 1 2 &phandle2 3>; - * } + * }; * - * To get a device_node of the `node2' node you may call this: + * To get a device_node of the ``node2`` node you may call this: * of_parse_phandle_with_args(node3, "list", "#list-cells", 1, &args); */ int of_parse_phandle_with_args(const struct device_node *np, const char *list_name, @@ -1512,29 +1512,29 @@ EXPORT_SYMBOL(of_parse_phandle_with_args); * Caller is responsible to call of_node_put() on the returned out_args->np * pointer. * - * Example: + * Example:: * - * phandle1: node1 { - * #list-cells = <2>; - * } + * phandle1: node1 { + * #list-cells = <2>; + * }; * - * phandle2: node2 { - * #list-cells = <1>; - * } + * phandle2: node2 { + * #list-cells = <1>; + * }; * - * phandle3: node3 { - * #list-cells = <1>; - * list-map = <0 &phandle2 3>, - * <1 &phandle2 2>, - * <2 &phandle1 5 1>; - * list-map-mask = <0x3>; - * }; + * phandle3: node3 { + * #list-cells = <1>; + * list-map = <0 &phandle2 3>, + * <1 &phandle2 2>, + * <2 &phandle1 5 1>; + * list-map-mask = <0x3>; + * }; * - * node4 { - * list = <&phandle1 1 2 &phandle3 0>; - * } + * node4 { + * list = <&phandle1 1 2 &phandle3 0>; + * }; * - * To get a device_node of the `node2' node you may call this: + * To get a device_node of the ``node2`` node you may call this: * of_parse_phandle_with_args(node4, "list", "list", 1, &args); */ int of_parse_phandle_with_args_map(const struct device_node *np, @@ -1694,19 +1694,19 @@ EXPORT_SYMBOL(of_parse_phandle_with_args_map); * Caller is responsible to call of_node_put() on the returned out_args->np * pointer. * - * Example: + * Example:: * - * phandle1: node1 { - * } + * phandle1: node1 { + * }; * - * phandle2: node2 { - * } + * phandle2: node2 { + * }; * - * node3 { - * list = <&phandle1 0 2 &phandle2 2 3>; - * } + * node3 { + * list = <&phandle1 0 2 &phandle2 2 3>; + * }; * - * To get a device_node of the `node2' node you may call this: + * To get a device_node of the ``node2`` node you may call this: * of_parse_phandle_with_fixed_args(node3, "list", 2, 1, &args); */ int of_parse_phandle_with_fixed_args(const struct device_node *np, @@ -1726,7 +1726,7 @@ EXPORT_SYMBOL(of_parse_phandle_with_fixed_args); * @list_name: property name that contains a list * @cells_name: property name that specifies phandles' arguments count * - * Returns the number of phandle + argument tuples within a property. It + * Return: The number of phandle + argument tuples within a property. It * is a typical pattern to encode a list of phandle and variable * arguments into a single property. The number of arguments is encoded * by a property in the phandle-target node. For example, a gpios @@ -1774,6 +1774,8 @@ EXPORT_SYMBOL(of_count_phandle_with_args); /** * __of_add_property - Add a property to a node without lock operations + * @np: Caller's Device Node + * @prop: Property to add */ int __of_add_property(struct device_node *np, struct property *prop) { @@ -1795,6 +1797,8 @@ int __of_add_property(struct device_node *np, struct property *prop) /** * of_add_property - Add a property to a node + * @np: Caller's Device Node + * @prop: Property to add */ int of_add_property(struct device_node *np, struct property *prop) { @@ -1839,6 +1843,8 @@ int __of_remove_property(struct device_node *np, struct property *prop) /** * of_remove_property - Remove a property from a node. + * @np: Caller's Device Node + * @prop: Property to remove * * Note that we don't actually remove it, since we have given out * who-knows-how-many pointers to the data using get-property. @@ -1946,13 +1952,12 @@ static void of_alias_add(struct alias_prop *ap, struct device_node *np, /** * of_alias_scan - Scan all properties of the 'aliases' node + * @dt_alloc: An allocator that provides a virtual address to memory + * for storing the resulting tree * * The function scans all the properties of the 'aliases' node and populates * the global lookup table with the properties. It returns the * number of alias properties found, or an error code in case of failure. - * - * @dt_alloc: An allocator that provides a virtual address to memory - * for storing the resulting tree */ void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align)) { @@ -2021,7 +2026,9 @@ void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align)) * @stem: Alias stem of the given device_node * * The function travels the lookup table to get the alias id for the given - * device_node and alias stem. It returns the alias id if found. + * device_node and alias stem. + * + * Return: The alias id if found. */ int of_alias_get_id(struct device_node *np, const char *stem) { @@ -2125,13 +2132,14 @@ EXPORT_SYMBOL_GPL(of_alias_get_highest_id); /** * of_console_check() - Test and setup console for DT setup - * @dn - Pointer to device node - * @name - Name to use for preferred console without index. ex. "ttyS" - * @index - Index to use for preferred console. + * @dn: Pointer to device node + * @name: Name to use for preferred console without index. ex. "ttyS" + * @index: Index to use for preferred console. * * Check if the given device node matches the stdout-path property in the - * /chosen node. If it does then register it as the preferred console and return - * TRUE. Otherwise return FALSE. + * /chosen node. If it does then register it as the preferred console. + * + * Return: TRUE if console successfully setup. Otherwise return FALSE. */ bool of_console_check(struct device_node *dn, char *name, int index) { @@ -2147,12 +2155,12 @@ bool of_console_check(struct device_node *dn, char *name, int index) EXPORT_SYMBOL_GPL(of_console_check); /** - * of_find_next_cache_node - Find a node's subsidiary cache - * @np: node of type "cpu" or "cache" + * of_find_next_cache_node - Find a node's subsidiary cache + * @np: node of type "cpu" or "cache" * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. Caller should hold a reference - * to np. + * Return: A node pointer with refcount incremented, use + * of_node_put() on it when done. Caller should hold a reference + * to np. */ struct device_node *of_find_next_cache_node(const struct device_node *np) { @@ -2182,7 +2190,7 @@ struct device_node *of_find_next_cache_node(const struct device_node *np) * * @cpu: cpu number(logical index) for which the last cache level is needed * - * Returns the the level at which the last cache is present. It is exactly + * Return: The the level at which the last cache is present. It is exactly * same as the total number of cache levels for the given logical cpu. */ int of_find_last_cache_level(unsigned int cpu) diff --git a/drivers/of/device.c b/drivers/of/device.c index 6cb86de404f1..c5a9473a5fb1 100644 --- a/drivers/of/device.c +++ b/drivers/of/device.c @@ -53,7 +53,7 @@ int of_device_add(struct platform_device *ofdev) } /** - * of_dma_configure - Setup DMA configuration + * of_dma_configure_id - Setup DMA configuration * @dev: Device to apply DMA configuration * @np: Pointer to OF node having DMA configuration * @force_dma: Whether device is to be set up by of_dma_configure() even if @@ -258,6 +258,9 @@ EXPORT_SYMBOL_GPL(of_device_request_module); /** * of_device_modalias - Fill buffer with newline terminated modalias string + * @dev: Calling device + * @str: Modalias string + * @len: Size of @str */ ssize_t of_device_modalias(struct device *dev, char *str, ssize_t len) { @@ -275,6 +278,8 @@ EXPORT_SYMBOL_GPL(of_device_modalias); /** * of_device_uevent - Display OF related uevent information + * @dev: Device to apply DMA configuration + * @env: Kernel object's userspace event reference */ void of_device_uevent(struct device *dev, struct kobj_uevent_env *env) { diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c index 9a824decf61f..cd3821a6444f 100644 --- a/drivers/of/dynamic.c +++ b/drivers/of/dynamic.c @@ -27,7 +27,7 @@ static struct device_node *kobj_to_device_node(struct kobject *kobj) * @node: Node to inc refcount, NULL is supported to simplify writing of * callers * - * Returns node. + * Return: The node with refcount incremented. */ struct device_node *of_node_get(struct device_node *node) { @@ -104,7 +104,8 @@ int of_reconfig_notify(unsigned long action, struct of_reconfig_data *p) * @arg - argument of the of notifier * * Returns the new state of a device based on the notifier used. - * Returns 0 on device going from enabled to disabled, 1 on device + * + * Return: 0 on device going from enabled to disabled, 1 on device * going from disabled to enabled and -1 on no change. */ int of_reconfig_get_state_change(unsigned long action, struct of_reconfig_data *pr) @@ -229,6 +230,7 @@ static void __of_attach_node(struct device_node *np) /** * of_attach_node() - Plug a device node into the tree and global list. + * @np: Pointer to the caller's Device Node */ int of_attach_node(struct device_node *np) { @@ -281,6 +283,7 @@ void __of_detach_node(struct device_node *np) /** * of_detach_node() - "Unplug" a node from the device tree. + * @np: Pointer to the caller's Device Node */ int of_detach_node(struct device_node *np) { @@ -318,7 +321,7 @@ static void property_list_free(struct property *prop_list) /** * of_node_release() - release a dynamically allocated node - * @kref: kref element of the node to be released + * @kobj: kernel object of the node to be released * * In of_node_put() this function is passed to kref_put() as the destructor. */ @@ -372,7 +375,8 @@ void of_node_release(struct kobject *kobj) * property structure and the property name & contents. The property's * flags have the OF_DYNAMIC bit set so that we can differentiate between * dynamically allocated properties and not. - * Returns the newly allocated property or NULL on out of memory error. + * + * Return: The newly allocated property or NULL on out of memory error. */ struct property *__of_prop_dup(const struct property *prop, gfp_t allocflags) { @@ -415,7 +419,7 @@ struct property *__of_prop_dup(const struct property *prop, gfp_t allocflags) * another node. The node data are dynamically allocated and all the node * flags have the OF_DYNAMIC & OF_DETACHED bits set. * - * Returns the newly allocated node or NULL on out of memory error. + * Return: The newly allocated node or NULL on out of memory error. */ struct device_node *__of_node_dup(const struct device_node *np, const char *full_name) @@ -781,7 +785,8 @@ static int __of_changeset_apply(struct of_changeset *ocs) * Any side-effects of live tree state changes are applied here on * success, like creation/destruction of devices and side-effects * like creation of sysfs properties and directories. - * Returns 0 on success, a negative error value in case of an error. + * + * Return: 0 on success, a negative error value in case of an error. * On error the partially applied effects are reverted. */ int of_changeset_apply(struct of_changeset *ocs) @@ -875,7 +880,8 @@ static int __of_changeset_revert(struct of_changeset *ocs) * was before the application. * Any side-effects like creation/destruction of devices and * removal of sysfs properties and directories are applied. - * Returns 0 on success, a negative error value in case of an error. + * + * Return: 0 on success, a negative error value in case of an error. */ int of_changeset_revert(struct of_changeset *ocs) { @@ -903,7 +909,8 @@ EXPORT_SYMBOL_GPL(of_changeset_revert); * + OF_RECONFIG_ADD_PROPERTY * + OF_RECONFIG_REMOVE_PROPERTY, * + OF_RECONFIG_UPDATE_PROPERTY - * Returns 0 on success, a negative error value in case of an error. + * + * Return: 0 on success, a negative error value in case of an error. */ int of_changeset_action(struct of_changeset *ocs, unsigned long action, struct device_node *np, struct property *prop) diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index adb26aff481d..ba17a80b8c79 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -282,7 +282,7 @@ static void reverse_nodes(struct device_node *parent) * @dad: Parent struct device_node * @nodepp: The device_node tree created by the call * - * It returns the size of unflattened device tree or error code + * Return: The size of unflattened device tree or error code */ static int unflatten_dt_nodes(const void *blob, void *mem, @@ -351,11 +351,6 @@ static int unflatten_dt_nodes(const void *blob, /** * __unflatten_device_tree - create tree of device_nodes from flat blob - * - * unflattens a device-tree, creating the - * tree of struct device_node. It also fills the "name" and "type" - * pointers of the nodes so the normal device-tree walking functions - * can be used. * @blob: The blob to expand * @dad: Parent device node * @mynodes: The device_node tree created by the call @@ -363,7 +358,11 @@ static int unflatten_dt_nodes(const void *blob, * for the resulting tree * @detached: if true set OF_DETACHED on @mynodes * - * Returns NULL on failure or the memory chunk containing the unflattened + * unflattens a device-tree, creating the tree of struct device_node. It also + * fills the "name" and "type" pointers of the nodes so the normal device-tree + * walking functions can be used. + * + * Return: NULL on failure or the memory chunk containing the unflattened * device tree on success. */ void *__unflatten_device_tree(const void *blob, @@ -452,7 +451,7 @@ static DEFINE_MUTEX(of_fdt_unflatten_mutex); * pointers of the nodes so the normal device-tree walking functions * can be used. * - * Returns NULL on failure or the memory chunk containing the unflattened + * Return: NULL on failure or the memory chunk containing the unflattened * device tree on success. */ void *of_fdt_unflatten_tree(const unsigned long *blob, @@ -480,7 +479,7 @@ void *initial_boot_params __ro_after_init; static u32 of_fdt_crc32; -/** +/* * __reserved_mem_reserve_reg() - reserve all memory described in 'reg' property */ static int __init __reserved_mem_reserve_reg(unsigned long node, @@ -526,7 +525,7 @@ static int __init __reserved_mem_reserve_reg(unsigned long node, return 0; } -/** +/* * __reserved_mem_check_root() - check if #size-cells, #address-cells provided * in /reserved-memory matches the values supported by the current implementation, * also check if ranges property has been provided @@ -549,8 +548,8 @@ static int __init __reserved_mem_check_root(unsigned long node) return 0; } -/** - * fdt_scan_reserved_mem() - scan a single FDT node for reserved memory +/* + * __fdt_scan_reserved_mem() - scan a single FDT node for reserved memory */ static int __init __fdt_scan_reserved_mem(unsigned long node, const char *uname, int depth, void *data) @@ -660,6 +659,7 @@ int __init of_scan_flat_dt(int (*it)(unsigned long node, /** * of_scan_flat_dt_subnodes - scan sub-nodes of a node call callback on each. + * @parent: parent node * @it: callback function * @data: context data pointer * @@ -699,7 +699,7 @@ int __init of_get_flat_dt_subnode_by_name(unsigned long node, const char *uname) return fdt_subnode_offset(initial_boot_params, node, uname); } -/** +/* * of_get_flat_dt_root - find the root node in the flat blob */ unsigned long __init of_get_flat_dt_root(void) @@ -707,7 +707,7 @@ unsigned long __init of_get_flat_dt_root(void) return 0; } -/** +/* * of_get_flat_dt_prop - Given a node in the flat blob, return the property ptr * * This function can be used within scan_flattened_dt callback to get @@ -726,7 +726,7 @@ const void *__init of_get_flat_dt_prop(unsigned long node, const char *name, * @node: node to test * @compat: compatible string to compare with compatible list. * - * On match, returns a non-zero value with smaller values returned for more + * Return: a non-zero value on match with smaller values returned for more * specific compatible values. */ static int of_fdt_is_compatible(const void *blob, @@ -761,7 +761,7 @@ int __init of_flat_dt_is_compatible(unsigned long node, const char *compat) return of_fdt_is_compatible(initial_boot_params, node, compat); } -/** +/* * of_flat_dt_match - Return true if node matches a list of compatible values */ static int __init of_flat_dt_match(unsigned long node, const char *const *compat) @@ -781,8 +781,8 @@ static int __init of_flat_dt_match(unsigned long node, const char *const *compat return score; } -/** - * of_get_flat_dt_prop - Given a node in the flat blob, return the phandle +/* + * of_get_flat_dt_phandle - Given a node in the flat blob, return the phandle */ uint32_t __init of_get_flat_dt_phandle(unsigned long node) { @@ -957,7 +957,7 @@ int __init early_init_dt_scan_chosen_stdout(void) } #endif -/** +/* * early_init_dt_scan_root - fetch the top level address and size cells */ int __init early_init_dt_scan_root(unsigned long node, const char *uname, @@ -993,7 +993,7 @@ u64 __init dt_mem_next_cell(int s, const __be32 **cellp) return of_read_number(p, s); } -/** +/* * early_init_dt_scan_memory - Look for and parse memory nodes */ int __init early_init_dt_scan_memory(unsigned long node, const char *uname, diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 25d17b8a1a1a..352e14b007e7 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -48,7 +48,7 @@ EXPORT_SYMBOL_GPL(irq_of_parse_and_map); * of_irq_find_parent - Given a device node, find its interrupt parent node * @child: pointer to device node * - * Returns a pointer to the interrupt parent node, or NULL if the interrupt + * Return: A pointer to the interrupt parent node, or NULL if the interrupt * parent could not be determined. */ struct device_node *of_irq_find_parent(struct device_node *child) @@ -81,14 +81,14 @@ EXPORT_SYMBOL_GPL(of_irq_find_parent); * @addr: address specifier (start of "reg" property of the device) in be32 format * @out_irq: structure of_phandle_args updated by this function * - * Returns 0 on success and a negative number on error - * * This function is a low-level interrupt tree walking function. It * can be used to do a partial walk with synthetized reg and interrupts * properties, for example when resolving PCI interrupts when no device * node exist for the parent. It takes an interrupt specifier structure as * input, walks the tree looking for any interrupt-map properties, translates * the specifier for each map, and then returns the translated map. + * + * Return: 0 on success and a negative number on error */ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq) { @@ -380,7 +380,7 @@ EXPORT_SYMBOL_GPL(of_irq_to_resource); * @dev: pointer to device tree node * @index: zero-based index of the IRQ * - * Returns Linux IRQ number on success, or 0 on the IRQ mapping failure, or + * Return: Linux IRQ number on success, or 0 on the IRQ mapping failure, or * -EPROBE_DEFER if the IRQ domain is not yet created, or error code in case * of any other failure. */ @@ -407,7 +407,7 @@ EXPORT_SYMBOL_GPL(of_irq_get); * @dev: pointer to device tree node * @name: IRQ name * - * Returns Linux IRQ number on success, or 0 on the IRQ mapping failure, or + * Return: Linux IRQ number on success, or 0 on the IRQ mapping failure, or * -EPROBE_DEFER if the IRQ domain is not yet created, or error code in case * of any other failure. */ @@ -447,7 +447,7 @@ int of_irq_count(struct device_node *dev) * @res: array of resources to fill in * @nr_irqs: the number of IRQs (and upper bound for num of @res elements) * - * Returns the size of the filled in table (up to @nr_irqs). + * Return: The size of the filled in table (up to @nr_irqs). */ int of_irq_to_resource_table(struct device_node *dev, struct resource *res, int nr_irqs) @@ -602,7 +602,7 @@ static u32 __of_msi_map_id(struct device *dev, struct device_node **np, * Walk up the device hierarchy looking for devices with a "msi-map" * property. If found, apply the mapping to @id_in. * - * Returns the mapped MSI ID. + * Return: The mapped MSI ID. */ u32 of_msi_map_id(struct device *dev, struct device_node *msi_np, u32 id_in) { diff --git a/drivers/of/kexec.c b/drivers/of/kexec.c new file mode 100644 index 000000000000..f335d941a716 --- /dev/null +++ b/drivers/of/kexec.c @@ -0,0 +1,458 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2020 Arm Limited + * + * Based on arch/arm64/kernel/machine_kexec_file.c: + * Copyright (C) 2018 Linaro Limited + * + * And arch/powerpc/kexec/file_load.c: + * Copyright (C) 2016 IBM Corporation + */ + +#include <linux/kernel.h> +#include <linux/kexec.h> +#include <linux/memblock.h> +#include <linux/libfdt.h> +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/random.h> +#include <linux/types.h> + +/* relevant device tree properties */ +#define FDT_PROP_KEXEC_ELFHDR "linux,elfcorehdr" +#define FDT_PROP_MEM_RANGE "linux,usable-memory-range" +#define FDT_PROP_INITRD_START "linux,initrd-start" +#define FDT_PROP_INITRD_END "linux,initrd-end" +#define FDT_PROP_BOOTARGS "bootargs" +#define FDT_PROP_KASLR_SEED "kaslr-seed" +#define FDT_PROP_RNG_SEED "rng-seed" +#define RNG_SEED_SIZE 128 + +/* + * Additional space needed for the FDT buffer so that we can add initrd, + * bootargs, kaslr-seed, rng-seed, useable-memory-range and elfcorehdr. + */ +#define FDT_EXTRA_SPACE 0x1000 + +/** + * fdt_find_and_del_mem_rsv - delete memory reservation with given address and size + * + * @fdt: Flattened device tree for the current kernel. + * @start: Starting address of the reserved memory. + * @size: Size of the reserved memory. + * + * Return: 0 on success, or negative errno on error. + */ +static int fdt_find_and_del_mem_rsv(void *fdt, unsigned long start, unsigned long size) +{ + int i, ret, num_rsvs = fdt_num_mem_rsv(fdt); + + for (i = 0; i < num_rsvs; i++) { + u64 rsv_start, rsv_size; + + ret = fdt_get_mem_rsv(fdt, i, &rsv_start, &rsv_size); + if (ret) { + pr_err("Malformed device tree.\n"); + return -EINVAL; + } + + if (rsv_start == start && rsv_size == size) { + ret = fdt_del_mem_rsv(fdt, i); + if (ret) { + pr_err("Error deleting device tree reservation.\n"); + return -EINVAL; + } + + return 0; + } + } + + return -ENOENT; +} + +/** + * get_addr_size_cells - Get address and size of root node + * + * @addr_cells: Return address of the root node + * @size_cells: Return size of the root node + * + * Return: 0 on success, or negative errno on error. + */ +static int get_addr_size_cells(int *addr_cells, int *size_cells) +{ + struct device_node *root; + + root = of_find_node_by_path("/"); + if (!root) + return -EINVAL; + + *addr_cells = of_n_addr_cells(root); + *size_cells = of_n_size_cells(root); + + of_node_put(root); + + return 0; +} + +/** + * do_get_kexec_buffer - Get address and size of device tree property + * + * @prop: Device tree property + * @len: Size of @prop + * @addr: Return address of the node + * @size: Return size of the node + * + * Return: 0 on success, or negative errno on error. + */ +static int do_get_kexec_buffer(const void *prop, int len, unsigned long *addr, + size_t *size) +{ + int ret, addr_cells, size_cells; + + ret = get_addr_size_cells(&addr_cells, &size_cells); + if (ret) + return ret; + + if (len < 4 * (addr_cells + size_cells)) + return -ENOENT; + + *addr = of_read_number(prop, addr_cells); + *size = of_read_number(prop + 4 * addr_cells, size_cells); + + return 0; +} + +/** + * ima_get_kexec_buffer - get IMA buffer from the previous kernel + * @addr: On successful return, set to point to the buffer contents. + * @size: On successful return, set to the buffer size. + * + * Return: 0 on success, negative errno on error. + */ +int ima_get_kexec_buffer(void **addr, size_t *size) +{ + int ret, len; + unsigned long tmp_addr; + size_t tmp_size; + const void *prop; + + if (!IS_ENABLED(CONFIG_HAVE_IMA_KEXEC)) + return -ENOTSUPP; + + prop = of_get_property(of_chosen, "linux,ima-kexec-buffer", &len); + if (!prop) + return -ENOENT; + + ret = do_get_kexec_buffer(prop, len, &tmp_addr, &tmp_size); + if (ret) + return ret; + + *addr = __va(tmp_addr); + *size = tmp_size; + + return 0; +} + +/** + * ima_free_kexec_buffer - free memory used by the IMA buffer + */ +int ima_free_kexec_buffer(void) +{ + int ret; + unsigned long addr; + size_t size; + struct property *prop; + + if (!IS_ENABLED(CONFIG_HAVE_IMA_KEXEC)) + return -ENOTSUPP; + + prop = of_find_property(of_chosen, "linux,ima-kexec-buffer", NULL); + if (!prop) + return -ENOENT; + + ret = do_get_kexec_buffer(prop->value, prop->length, &addr, &size); + if (ret) + return ret; + + ret = of_remove_property(of_chosen, prop); + if (ret) + return ret; + + return memblock_free(addr, size); + +} + +/** + * remove_ima_buffer - remove the IMA buffer property and reservation from @fdt + * + * @fdt: Flattened Device Tree to update + * @chosen_node: Offset to the chosen node in the device tree + * + * The IMA measurement buffer is of no use to a subsequent kernel, so we always + * remove it from the device tree. + */ +static void remove_ima_buffer(void *fdt, int chosen_node) +{ + int ret, len; + unsigned long addr; + size_t size; + const void *prop; + + if (!IS_ENABLED(CONFIG_HAVE_IMA_KEXEC)) + return; + + prop = fdt_getprop(fdt, chosen_node, "linux,ima-kexec-buffer", &len); + if (!prop) + return; + + ret = do_get_kexec_buffer(prop, len, &addr, &size); + fdt_delprop(fdt, chosen_node, "linux,ima-kexec-buffer"); + if (ret) + return; + + ret = fdt_find_and_del_mem_rsv(fdt, addr, size); + if (!ret) + pr_debug("Removed old IMA buffer reservation.\n"); +} + +#ifdef CONFIG_IMA_KEXEC +/** + * setup_ima_buffer - add IMA buffer information to the fdt + * @image: kexec image being loaded. + * @fdt: Flattened device tree for the next kernel. + * @chosen_node: Offset to the chosen node. + * + * Return: 0 on success, or negative errno on error. + */ +static int setup_ima_buffer(const struct kimage *image, void *fdt, + int chosen_node) +{ + int ret; + + if (!image->ima_buffer_size) + return 0; + + ret = fdt_appendprop_addrrange(fdt, 0, chosen_node, + "linux,ima-kexec-buffer", + image->ima_buffer_addr, + image->ima_buffer_size); + if (ret < 0) + return -EINVAL; + + ret = fdt_add_mem_rsv(fdt, image->ima_buffer_addr, + image->ima_buffer_size); + if (ret) + return -EINVAL; + + pr_debug("IMA buffer at 0x%llx, size = 0x%zx\n", + image->ima_buffer_addr, image->ima_buffer_size); + + return 0; +} +#else /* CONFIG_IMA_KEXEC */ +static inline int setup_ima_buffer(const struct kimage *image, void *fdt, + int chosen_node) +{ + return 0; +} +#endif /* CONFIG_IMA_KEXEC */ + +/* + * of_kexec_alloc_and_setup_fdt - Alloc and setup a new Flattened Device Tree + * + * @image: kexec image being loaded. + * @initrd_load_addr: Address where the next initrd will be loaded. + * @initrd_len: Size of the next initrd, or 0 if there will be none. + * @cmdline: Command line for the next kernel, or NULL if there will + * be none. + * @extra_fdt_size: Additional size for the new FDT buffer. + * + * Return: fdt on success, or NULL errno on error. + */ +void *of_kexec_alloc_and_setup_fdt(const struct kimage *image, + unsigned long initrd_load_addr, + unsigned long initrd_len, + const char *cmdline, size_t extra_fdt_size) +{ + void *fdt; + int ret, chosen_node; + const void *prop; + size_t fdt_size; + + fdt_size = fdt_totalsize(initial_boot_params) + + (cmdline ? strlen(cmdline) : 0) + + FDT_EXTRA_SPACE + + extra_fdt_size; + fdt = kvmalloc(fdt_size, GFP_KERNEL); + if (!fdt) + return NULL; + + ret = fdt_open_into(initial_boot_params, fdt, fdt_size); + if (ret < 0) { + pr_err("Error %d setting up the new device tree.\n", ret); + goto out; + } + + /* Remove memory reservation for the current device tree. */ + ret = fdt_find_and_del_mem_rsv(fdt, __pa(initial_boot_params), + fdt_totalsize(initial_boot_params)); + if (ret == -EINVAL) { + pr_err("Error removing memory reservation.\n"); + goto out; + } + + chosen_node = fdt_path_offset(fdt, "/chosen"); + if (chosen_node == -FDT_ERR_NOTFOUND) + chosen_node = fdt_add_subnode(fdt, fdt_path_offset(fdt, "/"), + "chosen"); + if (chosen_node < 0) { + ret = chosen_node; + goto out; + } + + ret = fdt_delprop(fdt, chosen_node, FDT_PROP_KEXEC_ELFHDR); + if (ret && ret != -FDT_ERR_NOTFOUND) + goto out; + ret = fdt_delprop(fdt, chosen_node, FDT_PROP_MEM_RANGE); + if (ret && ret != -FDT_ERR_NOTFOUND) + goto out; + + /* Did we boot using an initrd? */ + prop = fdt_getprop(fdt, chosen_node, "linux,initrd-start", NULL); + if (prop) { + u64 tmp_start, tmp_end, tmp_size; + + tmp_start = fdt64_to_cpu(*((const fdt64_t *) prop)); + + prop = fdt_getprop(fdt, chosen_node, "linux,initrd-end", NULL); + if (!prop) { + ret = -EINVAL; + goto out; + } + + tmp_end = fdt64_to_cpu(*((const fdt64_t *) prop)); + + /* + * kexec reserves exact initrd size, while firmware may + * reserve a multiple of PAGE_SIZE, so check for both. + */ + tmp_size = tmp_end - tmp_start; + ret = fdt_find_and_del_mem_rsv(fdt, tmp_start, tmp_size); + if (ret == -ENOENT) + ret = fdt_find_and_del_mem_rsv(fdt, tmp_start, + round_up(tmp_size, PAGE_SIZE)); + if (ret == -EINVAL) + goto out; + } + + /* add initrd-* */ + if (initrd_load_addr) { + ret = fdt_setprop_u64(fdt, chosen_node, FDT_PROP_INITRD_START, + initrd_load_addr); + if (ret) + goto out; + + ret = fdt_setprop_u64(fdt, chosen_node, FDT_PROP_INITRD_END, + initrd_load_addr + initrd_len); + if (ret) + goto out; + + ret = fdt_add_mem_rsv(fdt, initrd_load_addr, initrd_len); + if (ret) + goto out; + + } else { + ret = fdt_delprop(fdt, chosen_node, FDT_PROP_INITRD_START); + if (ret && (ret != -FDT_ERR_NOTFOUND)) + goto out; + + ret = fdt_delprop(fdt, chosen_node, FDT_PROP_INITRD_END); + if (ret && (ret != -FDT_ERR_NOTFOUND)) + goto out; + } + + if (image->type == KEXEC_TYPE_CRASH) { + /* add linux,elfcorehdr */ + ret = fdt_appendprop_addrrange(fdt, 0, chosen_node, + FDT_PROP_KEXEC_ELFHDR, + image->elf_load_addr, + image->elf_headers_sz); + if (ret) + goto out; + + /* + * Avoid elfcorehdr from being stomped on in kdump kernel by + * setting up memory reserve map. + */ + ret = fdt_add_mem_rsv(fdt, image->elf_load_addr, + image->elf_headers_sz); + if (ret) + goto out; + + /* add linux,usable-memory-range */ + ret = fdt_appendprop_addrrange(fdt, 0, chosen_node, + FDT_PROP_MEM_RANGE, + crashk_res.start, + crashk_res.end - crashk_res.start + 1); + if (ret) + goto out; + } + + /* add bootargs */ + if (cmdline) { + ret = fdt_setprop_string(fdt, chosen_node, FDT_PROP_BOOTARGS, cmdline); + if (ret) + goto out; + } else { + ret = fdt_delprop(fdt, chosen_node, FDT_PROP_BOOTARGS); + if (ret && (ret != -FDT_ERR_NOTFOUND)) + goto out; + } + + /* add kaslr-seed */ + ret = fdt_delprop(fdt, chosen_node, FDT_PROP_KASLR_SEED); + if (ret == -FDT_ERR_NOTFOUND) + ret = 0; + else if (ret) + goto out; + + if (rng_is_initialized()) { + u64 seed = get_random_u64(); + + ret = fdt_setprop_u64(fdt, chosen_node, FDT_PROP_KASLR_SEED, seed); + if (ret) + goto out; + } else { + pr_notice("RNG is not initialised: omitting \"%s\" property\n", + FDT_PROP_KASLR_SEED); + } + + /* add rng-seed */ + if (rng_is_initialized()) { + void *rng_seed; + + ret = fdt_setprop_placeholder(fdt, chosen_node, FDT_PROP_RNG_SEED, + RNG_SEED_SIZE, &rng_seed); + if (ret) + goto out; + get_random_bytes(rng_seed, RNG_SEED_SIZE); + } else { + pr_notice("RNG is not initialised: omitting \"%s\" property\n", + FDT_PROP_RNG_SEED); + } + + ret = fdt_setprop(fdt, chosen_node, "linux,booted-from-kexec", NULL, 0); + if (ret) + goto out; + + remove_ima_buffer(fdt, chosen_node); + ret = setup_ima_buffer(image, fdt, fdt_path_offset(fdt, "/chosen")); + +out: + if (ret) { + kvfree(fdt); + fdt = NULL; + } + + return fdt; +} diff --git a/drivers/of/of_net.c b/drivers/of/of_net.c index 6e411821583e..bc0a27de69d4 100644 --- a/drivers/of/of_net.c +++ b/drivers/of/of_net.c @@ -79,6 +79,9 @@ static const void *of_get_mac_addr_nvmem(struct device_node *np) } /** + * of_get_mac_address() + * @np: Caller's Device Node + * * Search the device tree for the best MAC address to use. 'mac-address' is * checked first, because that is supposed to contain to "most recent" MAC * address. If that isn't set, then 'local-mac-address' is checked next, diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c index a7fbc5e37e19..15e2417974d6 100644 --- a/drivers/of/of_reserved_mem.c +++ b/drivers/of/of_reserved_mem.c @@ -45,7 +45,7 @@ static int __init early_init_dt_alloc_reserved_memory_arch(phys_addr_t size, return memblock_reserve(base, size); } -/** +/* * fdt_reserved_mem_save_node() - save fdt node for second pass initialization */ void __init fdt_reserved_mem_save_node(unsigned long node, const char *uname, @@ -67,7 +67,7 @@ void __init fdt_reserved_mem_save_node(unsigned long node, const char *uname, return; } -/** +/* * __reserved_mem_alloc_size() - allocate reserved memory described by * 'size', 'alignment' and 'alloc-ranges' properties. */ @@ -164,7 +164,7 @@ static int __init __reserved_mem_alloc_size(unsigned long node, static const struct of_device_id __rmem_of_table_sentinel __used __section("__reservedmem_of_table_end"); -/** +/* * __reserved_mem_init_node() - call region specific reserved memory init code */ static int __init __reserved_mem_init_node(struct reserved_mem *rmem) diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c index 23effe5e50ec..180c6fb3ef36 100644 --- a/drivers/of/overlay.c +++ b/drivers/of/overlay.c @@ -140,7 +140,7 @@ int of_overlay_notifier_register(struct notifier_block *nb) EXPORT_SYMBOL_GPL(of_overlay_notifier_register); /** - * of_overlay_notifier_register() - Unregister notifier for overlay operations + * of_overlay_notifier_unregister() - Unregister notifier for overlay operations * @nb: Notifier block to unregister */ int of_overlay_notifier_unregister(struct notifier_block *nb) @@ -298,7 +298,7 @@ err_free_target_path: * * Update of property in symbols node is not allowed. * - * Returns 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if + * Return: 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if * invalid @overlay. */ static int add_changeset_property(struct overlay_changeset *ovcs, @@ -403,7 +403,7 @@ static int add_changeset_property(struct overlay_changeset *ovcs, * * NOTE_2: Multiple mods of created nodes not supported. * - * Returns 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if + * Return: 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if * invalid @overlay. */ static int add_changeset_node(struct overlay_changeset *ovcs, @@ -475,7 +475,7 @@ static int add_changeset_node(struct overlay_changeset *ovcs, * * Do not allow symbols node to have any children. * - * Returns 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if + * Return: 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if * invalid @overlay_node. */ static int build_changeset_next_level(struct overlay_changeset *ovcs, @@ -606,7 +606,7 @@ static int find_dup_cset_prop(struct overlay_changeset *ovcs, * the same node or duplicate {add, delete, or update} properties entries * for the same property. * - * Returns 0 on success, or -EINVAL if duplicate changeset entry found. + * Return: 0 on success, or -EINVAL if duplicate changeset entry found. */ static int changeset_dup_entry_check(struct overlay_changeset *ovcs) { @@ -630,7 +630,7 @@ static int changeset_dup_entry_check(struct overlay_changeset *ovcs) * any portions of the changeset that were successfully created will remain * in @ovcs->cset. * - * Returns 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if + * Return: 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if * invalid overlay in @ovcs->fragments[]. */ static int build_changeset(struct overlay_changeset *ovcs) @@ -726,7 +726,7 @@ static struct device_node *find_target(struct device_node *info_node) * the top level of @tree. The relevant top level nodes are the fragment * nodes and the __symbols__ node. Any other top level node will be ignored. * - * Returns 0 on success, -ENOMEM if memory allocation failure, -EINVAL if error + * Return: 0 on success, -ENOMEM if memory allocation failure, -EINVAL if error * detected in @tree, or -ENOSPC if idr_alloc() error. */ static int init_overlay_changeset(struct overlay_changeset *ovcs, @@ -796,6 +796,7 @@ static int init_overlay_changeset(struct overlay_changeset *ovcs, if (!fragment->target) { of_node_put(fragment->overlay); ret = -EINVAL; + of_node_put(node); goto err_free_fragments; } @@ -1186,7 +1187,7 @@ static int overlay_removal_is_ok(struct overlay_changeset *remove_ovcs) * If an error is returned by an overlay changeset post-remove notifier * then no further overlay changeset post-remove notifier will be called. * - * Returns 0 on success, or a negative error number. *ovcs_id is set to + * Return: 0 on success, or a negative error number. *@ovcs_id is set to * zero after reverting the changeset, even if a subsequent error occurs. */ int of_overlay_remove(int *ovcs_id) @@ -1264,7 +1265,7 @@ EXPORT_SYMBOL_GPL(of_overlay_remove); * * Removes all overlays from the system in the correct order. * - * Returns 0 on success, or a negative error number + * Return: 0 on success, or a negative error number */ int of_overlay_remove_all(void) { diff --git a/drivers/of/platform.c b/drivers/of/platform.c index 0da86209ddaa..25d448f5af91 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -44,7 +44,7 @@ static const struct of_device_id of_skipped_node_table[] = { * Takes a reference to the embedded struct device which needs to be dropped * after use. * - * Returns platform_device pointer, or NULL if not found + * Return: platform_device pointer, or NULL if not found */ struct platform_device *of_find_device_by_node(struct device_node *np) { @@ -160,7 +160,7 @@ EXPORT_SYMBOL(of_device_alloc); * @platform_data: pointer to populate platform_data pointer with * @parent: Linux device model parent device. * - * Returns pointer to created platform device, or NULL if a device was not + * Return: Pointer to created platform device, or NULL if a device was not * registered. Unavailable devices will not get registered. */ static struct platform_device *of_platform_device_create_pdata( @@ -204,7 +204,7 @@ err_clear_flag: * @bus_id: name to assign device * @parent: Linux device model parent device. * - * Returns pointer to created platform device, or NULL if a device was not + * Return: Pointer to created platform device, or NULL if a device was not * registered. Unavailable devices will not get registered. */ struct platform_device *of_platform_device_create(struct device_node *np, @@ -290,7 +290,7 @@ static struct amba_device *of_amba_device_create(struct device_node *node, } #endif /* CONFIG_ARM_AMBA */ -/** +/* * of_dev_lookup() - Given a device node, lookup the preferred Linux name */ static const struct of_dev_auxdata *of_dev_lookup(const struct of_dev_auxdata *lookup, @@ -463,7 +463,7 @@ EXPORT_SYMBOL(of_platform_bus_probe); * New board support should be using this function instead of * of_platform_bus_probe(). * - * Returns 0 on success, < 0 on failure. + * Return: 0 on success, < 0 on failure. */ int of_platform_populate(struct device_node *root, const struct of_device_id *matches, @@ -607,7 +607,7 @@ static void devm_of_platform_populate_release(struct device *dev, void *res) * Similar to of_platform_populate(), but will automatically call * of_platform_depopulate() when the device is unbound from the bus. * - * Returns 0 on success, < 0 on failure. + * Return: 0 on success, < 0 on failure. */ int devm_of_platform_populate(struct device *dev) { diff --git a/drivers/of/property.c b/drivers/of/property.c index aab6383f0219..6c028632f425 100644 --- a/drivers/of/property.c +++ b/drivers/of/property.c @@ -61,9 +61,11 @@ EXPORT_SYMBOL(of_graph_is_present); * @elem_size: size of the individual element * * Search for a property in a device node and count the number of elements of - * size elem_size in it. Returns number of elements on sucess, -EINVAL if the - * property does not exist or its length does not match a multiple of elem_size - * and -ENODATA if the property does not have a value. + * size elem_size in it. + * + * Return: The number of elements on sucess, -EINVAL if the property does not + * exist or its length does not match a multiple of elem_size and -ENODATA if + * the property does not have a value. */ int of_property_count_elems_of_size(const struct device_node *np, const char *propname, int elem_size) @@ -95,8 +97,9 @@ EXPORT_SYMBOL_GPL(of_property_count_elems_of_size); * @len: if !=NULL, actual length is written to here * * Search for a property in a device node and valid the requested size. - * Returns the property value on success, -EINVAL if the property does not - * exist, -ENODATA if property does not have a value, and -EOVERFLOW if the + * + * Return: The property value on success, -EINVAL if the property does not + * exist, -ENODATA if property does not have a value, and -EOVERFLOW if the * property data is too small or too large. * */ @@ -129,7 +132,9 @@ static void *of_find_property_value_of_size(const struct device_node *np, * @out_value: pointer to return value, modified only if no error. * * Search for a property in a device node and read nth 32-bit value from - * it. Returns 0 on success, -EINVAL if the property does not exist, + * it. + * + * Return: 0 on success, -EINVAL if the property does not exist, * -ENODATA if property does not have a value, and -EOVERFLOW if the * property data isn't large enough. * @@ -161,7 +166,9 @@ EXPORT_SYMBOL_GPL(of_property_read_u32_index); * @out_value: pointer to return value, modified only if no error. * * Search for a property in a device node and read nth 64-bit value from - * it. Returns 0 on success, -EINVAL if the property does not exist, + * it. + * + * Return: 0 on success, -EINVAL if the property does not exist, * -ENODATA if property does not have a value, and -EOVERFLOW if the * property data isn't large enough. * @@ -196,12 +203,14 @@ EXPORT_SYMBOL_GPL(of_property_read_u64_index); * sz_min will be read. * * Search for a property in a device node and read 8-bit value(s) from - * it. Returns number of elements read on success, -EINVAL if the property - * does not exist, -ENODATA if property does not have a value, and -EOVERFLOW - * if the property data is smaller than sz_min or longer than sz_max. + * it. * * dts entry of array should be like: - * property = /bits/ 8 <0x50 0x60 0x70>; + * ``property = /bits/ 8 <0x50 0x60 0x70>;`` + * + * Return: The number of elements read on success, -EINVAL if the property + * does not exist, -ENODATA if property does not have a value, and -EOVERFLOW + * if the property data is smaller than sz_min or longer than sz_max. * * The out_values is modified only if a valid u8 value can be decoded. */ @@ -244,12 +253,14 @@ EXPORT_SYMBOL_GPL(of_property_read_variable_u8_array); * sz_min will be read. * * Search for a property in a device node and read 16-bit value(s) from - * it. Returns number of elements read on success, -EINVAL if the property - * does not exist, -ENODATA if property does not have a value, and -EOVERFLOW - * if the property data is smaller than sz_min or longer than sz_max. + * it. * * dts entry of array should be like: - * property = /bits/ 16 <0x5000 0x6000 0x7000>; + * ``property = /bits/ 16 <0x5000 0x6000 0x7000>;`` + * + * Return: The number of elements read on success, -EINVAL if the property + * does not exist, -ENODATA if property does not have a value, and -EOVERFLOW + * if the property data is smaller than sz_min or longer than sz_max. * * The out_values is modified only if a valid u16 value can be decoded. */ @@ -292,7 +303,9 @@ EXPORT_SYMBOL_GPL(of_property_read_variable_u16_array); * sz_min will be read. * * Search for a property in a device node and read 32-bit value(s) from - * it. Returns number of elements read on success, -EINVAL if the property + * it. + * + * Return: The number of elements read on success, -EINVAL if the property * does not exist, -ENODATA if property does not have a value, and -EOVERFLOW * if the property data is smaller than sz_min or longer than sz_max. * @@ -331,7 +344,9 @@ EXPORT_SYMBOL_GPL(of_property_read_variable_u32_array); * @out_value: pointer to return value, modified only if return value is 0. * * Search for a property in a device node and read a 64-bit value from - * it. Returns 0 on success, -EINVAL if the property does not exist, + * it. + * + * Return: 0 on success, -EINVAL if the property does not exist, * -ENODATA if property does not have a value, and -EOVERFLOW if the * property data isn't large enough. * @@ -366,7 +381,9 @@ EXPORT_SYMBOL_GPL(of_property_read_u64); * sz_min will be read. * * Search for a property in a device node and read 64-bit value(s) from - * it. Returns number of elements read on success, -EINVAL if the property + * it. + * + * Return: The number of elements read on success, -EINVAL if the property * does not exist, -ENODATA if property does not have a value, and -EOVERFLOW * if the property data is smaller than sz_min or longer than sz_max. * @@ -408,10 +425,11 @@ EXPORT_SYMBOL_GPL(of_property_read_variable_u64_array); * return value is 0. * * Search for a property in a device tree node and retrieve a null - * terminated string value (pointer to data, not a copy). Returns 0 on - * success, -EINVAL if the property does not exist, -ENODATA if property - * does not have a value, and -EILSEQ if the string is not null-terminated - * within the length of the property data. + * terminated string value (pointer to data, not a copy). + * + * Return: 0 on success, -EINVAL if the property does not exist, -ENODATA if + * property does not have a value, and -EILSEQ if the string is not + * null-terminated within the length of the property data. * * The out_string pointer is modified only if a valid string can be decoded. */ @@ -775,7 +793,7 @@ EXPORT_SYMBOL(of_graph_get_remote_port_parent); * @node: pointer to a local endpoint device_node * * Return: Remote port node associated with remote endpoint node linked - * to @node. Use of_node_put() on it when done. + * to @node. Use of_node_put() on it when done. */ struct device_node *of_graph_get_remote_port(const struct device_node *node) { @@ -808,7 +826,7 @@ EXPORT_SYMBOL(of_graph_get_endpoint_count); * @endpoint: identifier (value of reg property) of the endpoint node * * Return: Remote device node associated with remote endpoint node linked - * to @node. Use of_node_put() on it when done. + * to @node. Use of_node_put() on it when done. */ struct device_node *of_graph_get_remote_node(const struct device_node *node, u32 port, u32 endpoint) @@ -1230,7 +1248,7 @@ static struct device_node *parse_##fname(struct device_node *np, \ * @parse_prop.prop_name: Name of property holding a phandle value * @parse_prop.index: For properties holding a list of phandles, this is the * index into the list - * @optional: The property can be an optional dependency. + * @optional: Describes whether a supplier is mandatory or not * @node_not_dev: The consumer node containing the property is never a device. * * Returns: @@ -1363,7 +1381,6 @@ static const struct supplier_bindings of_supplier_bindings[] = { /** * of_link_property - Create device links to suppliers listed in a property - * @dev: Consumer device * @con_np: The consumer device tree node which contains the property * @prop_name: Name of property to be parsed * @@ -1387,7 +1404,6 @@ static int of_link_property(struct device_node *con_np, const char *prop_name) const struct supplier_bindings *s = of_supplier_bindings; unsigned int i = 0; bool matched = false; - int ret = 0; /* Do not stop at first failed link, link all available suppliers. */ while (!matched && s->parse_prop) { @@ -1410,7 +1426,7 @@ static int of_link_property(struct device_node *con_np, const char *prop_name) } s++; } - return ret; + return 0; } static int of_fwnode_add_links(struct fwnode_handle *fwnode) diff --git a/drivers/of/unittest-data/Makefile b/drivers/of/unittest-data/Makefile index 009f4045c8e4..a5d2d9254b2c 100644 --- a/drivers/of/unittest-data/Makefile +++ b/drivers/of/unittest-data/Makefile @@ -38,3 +38,51 @@ DTC_FLAGS_testcases += -@ # suppress warnings about intentional errors DTC_FLAGS_testcases += -Wno-interrupts_property + +# Apply overlays statically with fdtoverlay. This is a build time test that +# the overlays can be applied successfully by fdtoverlay. This does not +# guarantee that the overlays can be applied successfully at run time by +# unittest, but it provides a bit of build time test coverage for those +# who do not execute unittest. +# +# The overlays are applied on top of static_base_1.dtb and static_base_2.dtb to +# create static_test_1.dtb and static_test_2.dtb. If fdtoverlay detects an +# error than the kernel build will fail. static_test_1.dtb and +# static_test_2.dtb are not consumed by unittest. +# +# Some unittest overlays deliberately contain errors that unittest checks for. +# These overlays will cause fdtoverlay to fail, and are thus not included +# in the static test: +# overlay_bad_add_dup_node.dtbo \ +# overlay_bad_add_dup_prop.dtbo \ +# overlay_bad_phandle.dtbo \ +# overlay_bad_symbol.dtbo \ + +apply_static_overlay_1 := overlay_0.dtbo \ + overlay_1.dtbo \ + overlay_2.dtbo \ + overlay_3.dtbo \ + overlay_4.dtbo \ + overlay_5.dtbo \ + overlay_6.dtbo \ + overlay_7.dtbo \ + overlay_8.dtbo \ + overlay_9.dtbo \ + overlay_10.dtbo \ + overlay_11.dtbo \ + overlay_12.dtbo \ + overlay_13.dtbo \ + overlay_15.dtbo \ + overlay_gpio_01.dtbo \ + overlay_gpio_02a.dtbo \ + overlay_gpio_02b.dtbo \ + overlay_gpio_03.dtbo \ + overlay_gpio_04a.dtbo \ + overlay_gpio_04b.dtbo + +apply_static_overlay_2 := overlay.dtbo + +static_test_1-dtbs := static_base_1.dtb $(apply_static_overlay_1) +static_test_2-dtbs := static_base_2.dtb $(apply_static_overlay_2) + +dtb-$(CONFIG_OF_OVERLAY) += static_test_1.dtb static_test_2.dtb diff --git a/drivers/of/unittest-data/overlay_base.dts b/drivers/of/unittest-data/overlay_base.dts index 99ab9d12d00b..ab9014589c5d 100644 --- a/drivers/of/unittest-data/overlay_base.dts +++ b/drivers/of/unittest-data/overlay_base.dts @@ -2,92 +2,4 @@ /dts-v1/; /plugin/; -/* - * Base device tree that overlays will be applied against. - * - * Do not add any properties in node "/". - * Do not add any nodes other than "/testcase-data-2" in node "/". - * Do not add anything that would result in dtc creating node "/__fixups__". - * dtc will create nodes "/__symbols__" and "/__local_fixups__". - */ - -/ { - testcase-data-2 { - #address-cells = <1>; - #size-cells = <1>; - - electric_1: substation@100 { - compatible = "ot,big-volts-control"; - reg = < 0x00000100 0x100 >; - status = "disabled"; - - hvac_1: hvac-medium-1 { - compatible = "ot,hvac-medium"; - heat-range = < 50 75 >; - cool-range = < 60 80 >; - }; - - spin_ctrl_1: motor-1 { - compatible = "ot,ferris-wheel-motor"; - spin = "clockwise"; - rpm_avail = < 50 >; - }; - - spin_ctrl_2: motor-8 { - compatible = "ot,roller-coaster-motor"; - }; - }; - - rides_1: fairway-1 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "ot,rides"; - status = "disabled"; - orientation = < 127 >; - - ride@100 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "ot,roller-coaster"; - reg = < 0x00000100 0x100 >; - hvac-provider = < &hvac_1 >; - hvac-thermostat = < 29 > ; - hvac-zones = < 14 >; - hvac-zone-names = "operator"; - spin-controller = < &spin_ctrl_2 5 &spin_ctrl_2 7 >; - spin-controller-names = "track_1", "track_2"; - queues = < 2 >; - - track@30 { - reg = < 0x00000030 0x10 >; - }; - - track@40 { - reg = < 0x00000040 0x10 >; - }; - - }; - }; - - lights_1: lights@30000 { - compatible = "ot,work-lights"; - reg = < 0x00030000 0x1000 >; - status = "disabled"; - }; - - lights_2: lights@40000 { - compatible = "ot,show-lights"; - reg = < 0x00040000 0x1000 >; - status = "disabled"; - rate = < 13 138 >; - }; - - retail_1: vending@50000 { - reg = < 0x00050000 0x1000 >; - compatible = "ot,tickets"; - status = "disabled"; - }; - - }; -}; - +#include "overlay_common.dtsi" diff --git a/drivers/of/unittest-data/overlay_common.dtsi b/drivers/of/unittest-data/overlay_common.dtsi new file mode 100644 index 000000000000..08874a72556e --- /dev/null +++ b/drivers/of/unittest-data/overlay_common.dtsi @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* + * Base device tree that overlays will be applied against. + * + * Do not add any properties in node "/". + * Do not add any nodes other than "/testcase-data-2" in node "/". + * Do not add anything that would result in dtc creating node "/__fixups__". + * dtc will create nodes "/__symbols__" and "/__local_fixups__". + */ + +/ { + testcase-data-2 { + #address-cells = <1>; + #size-cells = <1>; + + electric_1: substation@100 { + compatible = "ot,big-volts-control"; + reg = < 0x00000100 0x100 >; + status = "disabled"; + + hvac_1: hvac-medium-1 { + compatible = "ot,hvac-medium"; + heat-range = < 50 75 >; + cool-range = < 60 80 >; + }; + + spin_ctrl_1: motor-1 { + compatible = "ot,ferris-wheel-motor"; + spin = "clockwise"; + rpm_avail = < 50 >; + }; + + spin_ctrl_2: motor-8 { + compatible = "ot,roller-coaster-motor"; + }; + }; + + rides_1: fairway-1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ot,rides"; + status = "disabled"; + orientation = < 127 >; + + ride@100 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ot,roller-coaster"; + reg = < 0x00000100 0x100 >; + hvac-provider = < &hvac_1 >; + hvac-thermostat = < 29 > ; + hvac-zones = < 14 >; + hvac-zone-names = "operator"; + spin-controller = < &spin_ctrl_2 5 &spin_ctrl_2 7 >; + spin-controller-names = "track_1", "track_2"; + queues = < 2 >; + + track@30 { + reg = < 0x00000030 0x10 >; + }; + + track@40 { + reg = < 0x00000040 0x10 >; + }; + + }; + }; + + lights_1: lights@30000 { + compatible = "ot,work-lights"; + reg = < 0x00030000 0x1000 >; + status = "disabled"; + }; + + lights_2: lights@40000 { + compatible = "ot,show-lights"; + reg = < 0x00040000 0x1000 >; + status = "disabled"; + rate = < 13 138 >; + }; + + retail_1: vending@50000 { + reg = < 0x00050000 0x1000 >; + compatible = "ot,tickets"; + status = "disabled"; + }; + + }; +}; + diff --git a/drivers/of/unittest-data/static_base_1.dts b/drivers/of/unittest-data/static_base_1.dts new file mode 100644 index 000000000000..10556cb3f01f --- /dev/null +++ b/drivers/of/unittest-data/static_base_1.dts @@ -0,0 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "testcases_common.dtsi" diff --git a/drivers/of/unittest-data/static_base_2.dts b/drivers/of/unittest-data/static_base_2.dts new file mode 100644 index 000000000000..b0ea9504d6f3 --- /dev/null +++ b/drivers/of/unittest-data/static_base_2.dts @@ -0,0 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "overlay_common.dtsi" diff --git a/drivers/of/unittest-data/testcases.dts b/drivers/of/unittest-data/testcases.dts index a85b5e1c381a..61cdd3d5fccb 100644 --- a/drivers/of/unittest-data/testcases.dts +++ b/drivers/of/unittest-data/testcases.dts @@ -2,19 +2,20 @@ /dts-v1/; /plugin/; +#include "testcases_common.dtsi" + / { + /* + * testcase data that intentionally results in an error is located here + * instead of in testcases_common.dtsi so that the static overlay apply + * tests will not include the error. + */ testcase-data { - changeset { - prop-update = "hello"; - prop-remove = "world"; - node-remove { - }; + testcase-device2 { + compatible = "testcase-device"; + interrupt-parent = <&test_intc2>; + interrupts = <1>; /* invalid specifier - too short */ }; }; + }; -#include "tests-phandle.dtsi" -#include "tests-interrupts.dtsi" -#include "tests-match.dtsi" -#include "tests-address.dtsi" -#include "tests-platform.dtsi" -#include "tests-overlay.dtsi" diff --git a/drivers/of/unittest-data/testcases_common.dtsi b/drivers/of/unittest-data/testcases_common.dtsi new file mode 100644 index 000000000000..19292bbb4cbb --- /dev/null +++ b/drivers/of/unittest-data/testcases_common.dtsi @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + testcase-data { + changeset { + prop-update = "hello"; + prop-remove = "world"; + node-remove { + }; + }; + }; +}; + +#include "tests-phandle.dtsi" +#include "tests-interrupts.dtsi" +#include "tests-match.dtsi" +#include "tests-address.dtsi" +#include "tests-platform.dtsi" +#include "tests-overlay.dtsi" diff --git a/drivers/of/unittest-data/tests-interrupts.dtsi b/drivers/of/unittest-data/tests-interrupts.dtsi index ec175e800725..9b60a549f502 100644 --- a/drivers/of/unittest-data/tests-interrupts.dtsi +++ b/drivers/of/unittest-data/tests-interrupts.dtsi @@ -62,11 +62,10 @@ interrupts = <1>; }; - testcase-device2 { - compatible = "testcase-device"; - interrupt-parent = <&test_intc2>; - interrupts = <1>; /* invalid specifier - too short */ - }; + /* + * testcase data that intentionally results in an error is + * located in testcases.dts instead of in this file so that the + * static overlay apply tests will not include the error. + */ }; - }; |