diff options
Diffstat (limited to 'drivers/mfd/tps80031.c')
| -rw-r--r-- | drivers/mfd/tps80031.c | 574 |
1 files changed, 574 insertions, 0 deletions
diff --git a/drivers/mfd/tps80031.c b/drivers/mfd/tps80031.c new file mode 100644 index 000000000000..10b51f7dfff3 --- /dev/null +++ b/drivers/mfd/tps80031.c @@ -0,0 +1,574 @@ +/* + * tps80031.c -- TI TPS80031/TPS80032 mfd core driver. + * + * MFD core driver for TI TPS80031/TPS80032 Fully Integrated + * Power Management with Power Path and Battery Charger + * + * Copyright (c) 2012, NVIDIA Corporation. + * + * Author: Laxman Dewangan <ldewangan@nvidia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, + * whether express or implied; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307, USA + */ + +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/mfd/core.h> +#include <linux/mfd/tps80031.h> +#include <linux/module.h> +#include <linux/pm.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +static struct resource tps80031_rtc_resources[] = { + { + .start = TPS80031_INT_RTC_ALARM, + .end = TPS80031_INT_RTC_ALARM, + .flags = IORESOURCE_IRQ, + }, +}; + +/* TPS80031 sub mfd devices */ +static struct mfd_cell tps80031_cell[] = { + { + .name = "tps80031-pmic", + }, + { + .name = "tps80031-clock", + }, + { + .name = "tps80031-rtc", + .num_resources = ARRAY_SIZE(tps80031_rtc_resources), + .resources = tps80031_rtc_resources, + }, + { + .name = "tps80031-gpadc", + }, + { + .name = "tps80031-fuel-gauge", + }, + { + .name = "tps80031-charger", + }, +}; + +static int tps80031_slave_address[TPS80031_NUM_SLAVES] = { + TPS80031_I2C_ID0_ADDR, + TPS80031_I2C_ID1_ADDR, + TPS80031_I2C_ID2_ADDR, + TPS80031_I2C_ID3_ADDR, +}; + +struct tps80031_pupd_data { + u8 reg; + u8 pullup_bit; + u8 pulldown_bit; +}; + +#define TPS80031_IRQ(_reg, _mask) \ + { \ + .reg_offset = (TPS80031_INT_MSK_LINE_##_reg) - \ + TPS80031_INT_MSK_LINE_A, \ + .mask = BIT(_mask), \ + } + +static const struct regmap_irq tps80031_main_irqs[] = { + [TPS80031_INT_PWRON] = TPS80031_IRQ(A, 0), + [TPS80031_INT_RPWRON] = TPS80031_IRQ(A, 1), + [TPS80031_INT_SYS_VLOW] = TPS80031_IRQ(A, 2), + [TPS80031_INT_RTC_ALARM] = TPS80031_IRQ(A, 3), + [TPS80031_INT_RTC_PERIOD] = TPS80031_IRQ(A, 4), + [TPS80031_INT_HOT_DIE] = TPS80031_IRQ(A, 5), + [TPS80031_INT_VXX_SHORT] = TPS80031_IRQ(A, 6), + [TPS80031_INT_SPDURATION] = TPS80031_IRQ(A, 7), + [TPS80031_INT_WATCHDOG] = TPS80031_IRQ(B, 0), + [TPS80031_INT_BAT] = TPS80031_IRQ(B, 1), + [TPS80031_INT_SIM] = TPS80031_IRQ(B, 2), + [TPS80031_INT_MMC] = TPS80031_IRQ(B, 3), + [TPS80031_INT_RES] = TPS80031_IRQ(B, 4), + [TPS80031_INT_GPADC_RT] = TPS80031_IRQ(B, 5), + [TPS80031_INT_GPADC_SW2_EOC] = TPS80031_IRQ(B, 6), + [TPS80031_INT_CC_AUTOCAL] = TPS80031_IRQ(B, 7), + [TPS80031_INT_ID_WKUP] = TPS80031_IRQ(C, 0), + [TPS80031_INT_VBUSS_WKUP] = TPS80031_IRQ(C, 1), + [TPS80031_INT_ID] = TPS80031_IRQ(C, 2), + [TPS80031_INT_VBUS] = TPS80031_IRQ(C, 3), + [TPS80031_INT_CHRG_CTRL] = TPS80031_IRQ(C, 4), + [TPS80031_INT_EXT_CHRG] = TPS80031_IRQ(C, 5), + [TPS80031_INT_INT_CHRG] = TPS80031_IRQ(C, 6), + [TPS80031_INT_RES2] = TPS80031_IRQ(C, 7), +}; + +static struct regmap_irq_chip tps80031_irq_chip = { + .name = "tps80031", + .irqs = tps80031_main_irqs, + .num_irqs = ARRAY_SIZE(tps80031_main_irqs), + .num_regs = 3, + .status_base = TPS80031_INT_STS_A, + .mask_base = TPS80031_INT_MSK_LINE_A, +}; + +#define PUPD_DATA(_reg, _pulldown_bit, _pullup_bit) \ + { \ + .reg = TPS80031_CFG_INPUT_PUPD##_reg, \ + .pulldown_bit = _pulldown_bit, \ + .pullup_bit = _pullup_bit, \ + } + +static const struct tps80031_pupd_data tps80031_pupds[] = { + [TPS80031_PREQ1] = PUPD_DATA(1, BIT(0), BIT(1)), + [TPS80031_PREQ2A] = PUPD_DATA(1, BIT(2), BIT(3)), + [TPS80031_PREQ2B] = PUPD_DATA(1, BIT(4), BIT(5)), + [TPS80031_PREQ2C] = PUPD_DATA(1, BIT(6), BIT(7)), + [TPS80031_PREQ3] = PUPD_DATA(2, BIT(0), BIT(1)), + [TPS80031_NRES_WARM] = PUPD_DATA(2, 0, BIT(2)), + [TPS80031_PWM_FORCE] = PUPD_DATA(2, BIT(5), 0), + [TPS80031_CHRG_EXT_CHRG_STATZ] = PUPD_DATA(2, 0, BIT(6)), + [TPS80031_SIM] = PUPD_DATA(3, BIT(0), BIT(1)), + [TPS80031_MMC] = PUPD_DATA(3, BIT(2), BIT(3)), + [TPS80031_GPADC_START] = PUPD_DATA(3, BIT(4), 0), + [TPS80031_DVSI2C_SCL] = PUPD_DATA(4, 0, BIT(0)), + [TPS80031_DVSI2C_SDA] = PUPD_DATA(4, 0, BIT(1)), + [TPS80031_CTLI2C_SCL] = PUPD_DATA(4, 0, BIT(2)), + [TPS80031_CTLI2C_SDA] = PUPD_DATA(4, 0, BIT(3)), +}; +static struct tps80031 *tps80031_power_off_dev; + +int tps80031_ext_power_req_config(struct device *dev, + unsigned long ext_ctrl_flag, int preq_bit, + int state_reg_add, int trans_reg_add) +{ + u8 res_ass_reg = 0; + int preq_mask_bit = 0; + int ret; + + if (!(ext_ctrl_flag & TPS80031_EXT_PWR_REQ)) + return 0; + + if (ext_ctrl_flag & TPS80031_PWR_REQ_INPUT_PREQ1) { + res_ass_reg = TPS80031_PREQ1_RES_ASS_A + (preq_bit >> 3); + preq_mask_bit = 5; + } else if (ext_ctrl_flag & TPS80031_PWR_REQ_INPUT_PREQ2) { + res_ass_reg = TPS80031_PREQ2_RES_ASS_A + (preq_bit >> 3); + preq_mask_bit = 6; + } else if (ext_ctrl_flag & TPS80031_PWR_REQ_INPUT_PREQ3) { + res_ass_reg = TPS80031_PREQ3_RES_ASS_A + (preq_bit >> 3); + preq_mask_bit = 7; + } + + /* Configure REQ_ASS registers */ + ret = tps80031_set_bits(dev, TPS80031_SLAVE_ID1, res_ass_reg, + BIT(preq_bit & 0x7)); + if (ret < 0) { + dev_err(dev, "reg 0x%02x setbit failed, err = %d\n", + res_ass_reg, ret); + return ret; + } + + /* Unmask the PREQ */ + ret = tps80031_clr_bits(dev, TPS80031_SLAVE_ID1, + TPS80031_PHOENIX_MSK_TRANSITION, BIT(preq_mask_bit)); + if (ret < 0) { + dev_err(dev, "reg 0x%02x clrbit failed, err = %d\n", + TPS80031_PHOENIX_MSK_TRANSITION, ret); + return ret; + } + + /* Switch regulator control to resource now */ + if (ext_ctrl_flag & (TPS80031_PWR_REQ_INPUT_PREQ2 | + TPS80031_PWR_REQ_INPUT_PREQ3)) { + ret = tps80031_update(dev, TPS80031_SLAVE_ID1, state_reg_add, + 0x0, TPS80031_STATE_MASK); + if (ret < 0) + dev_err(dev, "reg 0x%02x update failed, err = %d\n", + state_reg_add, ret); + } else { + ret = tps80031_update(dev, TPS80031_SLAVE_ID1, trans_reg_add, + TPS80031_TRANS_SLEEP_OFF, + TPS80031_TRANS_SLEEP_MASK); + if (ret < 0) + dev_err(dev, "reg 0x%02x update failed, err = %d\n", + trans_reg_add, ret); + } + return ret; +} +EXPORT_SYMBOL_GPL(tps80031_ext_power_req_config); + +static void tps80031_power_off(void) +{ + dev_info(tps80031_power_off_dev->dev, "switching off PMU\n"); + tps80031_write(tps80031_power_off_dev->dev, TPS80031_SLAVE_ID1, + TPS80031_PHOENIX_DEV_ON, TPS80031_DEVOFF); +} + +static void tps80031_pupd_init(struct tps80031 *tps80031, + struct tps80031_platform_data *pdata) +{ + struct tps80031_pupd_init_data *pupd_init_data = pdata->pupd_init_data; + int data_size = pdata->pupd_init_data_size; + int i; + + for (i = 0; i < data_size; ++i) { + struct tps80031_pupd_init_data *pupd_init = &pupd_init_data[i]; + const struct tps80031_pupd_data *pupd = + &tps80031_pupds[pupd_init->input_pin]; + u8 update_value = 0; + u8 update_mask = pupd->pulldown_bit | pupd->pullup_bit; + + if (pupd_init->setting == TPS80031_PUPD_PULLDOWN) + update_value = pupd->pulldown_bit; + else if (pupd_init->setting == TPS80031_PUPD_PULLUP) + update_value = pupd->pullup_bit; + + tps80031_update(tps80031->dev, TPS80031_SLAVE_ID1, pupd->reg, + update_value, update_mask); + } +} + +static int tps80031_init_ext_control(struct tps80031 *tps80031, + struct tps80031_platform_data *pdata) +{ + struct device *dev = tps80031->dev; + int ret; + int i; + + /* Clear all external control for this rail */ + for (i = 0; i < 9; ++i) { + ret = tps80031_write(dev, TPS80031_SLAVE_ID1, + TPS80031_PREQ1_RES_ASS_A + i, 0); + if (ret < 0) { + dev_err(dev, "reg 0x%02x write failed, err = %d\n", + TPS80031_PREQ1_RES_ASS_A + i, ret); + return ret; + } + } + + /* Mask the PREQ */ + ret = tps80031_set_bits(dev, TPS80031_SLAVE_ID1, + TPS80031_PHOENIX_MSK_TRANSITION, 0x7 << 5); + if (ret < 0) { + dev_err(dev, "reg 0x%02x set_bits failed, err = %d\n", + TPS80031_PHOENIX_MSK_TRANSITION, ret); + return ret; + } + return ret; +} + +static int __devinit tps80031_irq_init(struct tps80031 *tps80031, int irq, + int irq_base) +{ + struct device *dev = tps80031->dev; + int i, ret; + + /* + * The MASK register used for updating status register when + * interrupt occurs and LINE register used to pass the status + * to actual interrupt line. As per datasheet: + * When INT_MSK_LINE [i] is set to 1, the associated interrupt + * number i is INT line masked, which means that no interrupt is + * generated on the INT line. + * When INT_MSK_LINE [i] is set to 0, the associated interrupt + * number i is line enabled: An interrupt is generated on the + * INT line. + * In any case, the INT_STS [i] status bit may or may not be updated, + * only linked to the INT_MSK_STS [i] configuration register bit. + * + * When INT_MSK_STS [i] is set to 1, the associated interrupt number + * i is status masked, which means that no interrupt is stored in + * the INT_STS[i] status bit. Note that no interrupt number i is + * generated on the INT line, even if the INT_MSK_LINE [i] register + * bit is set to 0. + * When INT_MSK_STS [i] is set to 0, the associated interrupt number i + * is status enabled: An interrupt status is updated in the INT_STS [i] + * register. The interrupt may or may not be generated on the INT line, + * depending on the INT_MSK_LINE [i] configuration register bit. + */ + for (i = 0; i < 3; i++) + tps80031_write(dev, TPS80031_SLAVE_ID2, + TPS80031_INT_MSK_STS_A + i, 0x00); + + ret = regmap_add_irq_chip(tps80031->regmap[TPS80031_SLAVE_ID2], irq, + IRQF_ONESHOT, irq_base, + &tps80031_irq_chip, &tps80031->irq_data); + if (ret < 0) { + dev_err(dev, "add irq failed, err = %d\n", ret); + return ret; + } + return ret; +} + +static bool rd_wr_reg_id0(struct device *dev, unsigned int reg) +{ + switch (reg) { + case TPS80031_SMPS1_CFG_FORCE ... TPS80031_SMPS2_CFG_VOLTAGE: + return true; + default: + return false; + } +} + +static bool rd_wr_reg_id1(struct device *dev, unsigned int reg) +{ + switch (reg) { + case TPS80031_SECONDS_REG ... TPS80031_RTC_RESET_STATUS_REG: + case TPS80031_VALIDITY0 ... TPS80031_VALIDITY7: + case TPS80031_PHOENIX_START_CONDITION ... TPS80031_KEY_PRESS_DUR_CFG: + case TPS80031_SMPS4_CFG_TRANS ... TPS80031_SMPS3_CFG_VOLTAGE: + case TPS80031_BROADCAST_ADDR_ALL ... TPS80031_BROADCAST_ADDR_CLK_RST: + case TPS80031_VANA_CFG_TRANS ... TPS80031_LDO7_CFG_VOLTAGE: + case TPS80031_REGEN1_CFG_TRANS ... TPS80031_TMP_CFG_STATE: + case TPS80031_PREQ1_RES_ASS_A ... TPS80031_PREQ3_RES_ASS_C: + case TPS80031_SMPS_OFFSET ... TPS80031_BATDEBOUNCING: + case TPS80031_CFG_INPUT_PUPD1 ... TPS80031_CFG_SMPS_PD: + case TPS80031_BACKUP_REG: + return true; + default: + return false; + } +} + +static bool is_volatile_reg_id1(struct device *dev, unsigned int reg) +{ + switch (reg) { + case TPS80031_SMPS4_CFG_TRANS ... TPS80031_SMPS3_CFG_VOLTAGE: + case TPS80031_VANA_CFG_TRANS ... TPS80031_LDO7_CFG_VOLTAGE: + case TPS80031_REGEN1_CFG_TRANS ... TPS80031_TMP_CFG_STATE: + case TPS80031_PREQ1_RES_ASS_A ... TPS80031_PREQ3_RES_ASS_C: + case TPS80031_SMPS_OFFSET ... TPS80031_BATDEBOUNCING: + case TPS80031_CFG_INPUT_PUPD1 ... TPS80031_CFG_SMPS_PD: + return true; + default: + return false; + } +} + +static bool rd_wr_reg_id2(struct device *dev, unsigned int reg) +{ + switch (reg) { + case TPS80031_USB_VENDOR_ID_LSB ... TPS80031_USB_OTG_REVISION: + case TPS80031_GPADC_CTRL ... TPS80031_CTRL_P1: + case TPS80031_RTCH0_LSB ... TPS80031_GPCH0_MSB: + case TPS80031_TOGGLE1 ... TPS80031_VIBMODE: + case TPS80031_PWM1ON ... TPS80031_PWM2OFF: + case TPS80031_FG_REG_00 ... TPS80031_FG_REG_11: + case TPS80031_INT_STS_A ... TPS80031_INT_MSK_STS_C: + case TPS80031_CONTROLLER_CTRL2 ... TPS80031_LED_PWM_CTRL2: + return true; + default: + return false; + } +} + +static bool rd_wr_reg_id3(struct device *dev, unsigned int reg) +{ + switch (reg) { + case TPS80031_GPADC_TRIM0 ... TPS80031_GPADC_TRIM18: + return true; + default: + return false; + } +} + +static const struct regmap_config tps80031_regmap_configs[] = { + { + .reg_bits = 8, + .val_bits = 8, + .writeable_reg = rd_wr_reg_id0, + .readable_reg = rd_wr_reg_id0, + .max_register = TPS80031_MAX_REGISTER, + }, + { + .reg_bits = 8, + .val_bits = 8, + .writeable_reg = rd_wr_reg_id1, + .readable_reg = rd_wr_reg_id1, + .volatile_reg = is_volatile_reg_id1, + .max_register = TPS80031_MAX_REGISTER, + }, + { + .reg_bits = 8, + .val_bits = 8, + .writeable_reg = rd_wr_reg_id2, + .readable_reg = rd_wr_reg_id2, + .max_register = TPS80031_MAX_REGISTER, + }, + { + .reg_bits = 8, + .val_bits = 8, + .writeable_reg = rd_wr_reg_id3, + .readable_reg = rd_wr_reg_id3, + .max_register = TPS80031_MAX_REGISTER, + }, +}; + +static int __devinit tps80031_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tps80031_platform_data *pdata = client->dev.platform_data; + struct tps80031 *tps80031; + int ret; + uint8_t es_version; + uint8_t ep_ver; + int i; + + if (!pdata) { + dev_err(&client->dev, "tps80031 requires platform data\n"); + return -EINVAL; + } + + tps80031 = devm_kzalloc(&client->dev, sizeof(*tps80031), GFP_KERNEL); + if (!tps80031) { + dev_err(&client->dev, "Malloc failed for tps80031\n"); + return -ENOMEM; + } + + for (i = 0; i < TPS80031_NUM_SLAVES; i++) { + if (tps80031_slave_address[i] == client->addr) + tps80031->clients[i] = client; + else + tps80031->clients[i] = i2c_new_dummy(client->adapter, + tps80031_slave_address[i]); + if (!tps80031->clients[i]) { + dev_err(&client->dev, "can't attach client %d\n", i); + ret = -ENOMEM; + goto fail_client_reg; + } + + i2c_set_clientdata(tps80031->clients[i], tps80031); + tps80031->regmap[i] = devm_regmap_init_i2c(tps80031->clients[i], + &tps80031_regmap_configs[i]); + if (IS_ERR(tps80031->regmap[i])) { + ret = PTR_ERR(tps80031->regmap[i]); + dev_err(&client->dev, + "regmap %d init failed, err %d\n", i, ret); + goto fail_client_reg; + } + } + + ret = tps80031_read(&client->dev, TPS80031_SLAVE_ID3, + TPS80031_JTAGVERNUM, &es_version); + if (ret < 0) { + dev_err(&client->dev, + "Silicon version number read failed: %d\n", ret); + goto fail_client_reg; + } + + ret = tps80031_read(&client->dev, TPS80031_SLAVE_ID3, + TPS80031_EPROM_REV, &ep_ver); + if (ret < 0) { + dev_err(&client->dev, + "Silicon eeprom version read failed: %d\n", ret); + goto fail_client_reg; + } + + dev_info(&client->dev, "ES version 0x%02x and EPROM version 0x%02x\n", + es_version, ep_ver); + tps80031->es_version = es_version; + tps80031->dev = &client->dev; + i2c_set_clientdata(client, tps80031); + tps80031->chip_info = id->driver_data; + + ret = tps80031_irq_init(tps80031, client->irq, pdata->irq_base); + if (ret) { + dev_err(&client->dev, "IRQ init failed: %d\n", ret); + goto fail_client_reg; + } + + tps80031_pupd_init(tps80031, pdata); + + tps80031_init_ext_control(tps80031, pdata); + + ret = mfd_add_devices(tps80031->dev, -1, + tps80031_cell, ARRAY_SIZE(tps80031_cell), + NULL, 0, + regmap_irq_get_domain(tps80031->irq_data)); + if (ret < 0) { + dev_err(&client->dev, "mfd_add_devices failed: %d\n", ret); + goto fail_mfd_add; + } + + if (pdata->use_power_off && !pm_power_off) { + tps80031_power_off_dev = tps80031; + pm_power_off = tps80031_power_off; + } + return 0; + +fail_mfd_add: + regmap_del_irq_chip(client->irq, tps80031->irq_data); + +fail_client_reg: + for (i = 0; i < TPS80031_NUM_SLAVES; i++) { + if (tps80031->clients[i] && (tps80031->clients[i] != client)) + i2c_unregister_device(tps80031->clients[i]); + } + return ret; +} + +static int __devexit tps80031_remove(struct i2c_client *client) +{ + struct tps80031 *tps80031 = i2c_get_clientdata(client); + int i; + + if (tps80031_power_off_dev == tps80031) { + tps80031_power_off_dev = NULL; + pm_power_off = NULL; + } + + mfd_remove_devices(tps80031->dev); + + regmap_del_irq_chip(client->irq, tps80031->irq_data); + + for (i = 0; i < TPS80031_NUM_SLAVES; i++) { + if (tps80031->clients[i] != client) + i2c_unregister_device(tps80031->clients[i]); + } + return 0; +} + +static const struct i2c_device_id tps80031_id_table[] = { + { "tps80031", TPS80031 }, + { "tps80032", TPS80032 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tps80031_id_table); + +static struct i2c_driver tps80031_driver = { + .driver = { + .name = "tps80031", + .owner = THIS_MODULE, + }, + .probe = tps80031_probe, + .remove = __devexit_p(tps80031_remove), + .id_table = tps80031_id_table, +}; + +static int __init tps80031_init(void) +{ + return i2c_add_driver(&tps80031_driver); +} +subsys_initcall(tps80031_init); + +static void __exit tps80031_exit(void) +{ + i2c_del_driver(&tps80031_driver); +} +module_exit(tps80031_exit); + +MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); +MODULE_DESCRIPTION("TPS80031 core driver"); +MODULE_LICENSE("GPL v2"); |