diff options
Diffstat (limited to 'drivers/hwmon')
-rw-r--r-- | drivers/hwmon/Kconfig | 10 | ||||
-rw-r--r-- | drivers/hwmon/Makefile | 1 | ||||
-rw-r--r-- | drivers/hwmon/nzxt-smart2.c | 829 |
3 files changed, 840 insertions, 0 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 3e6064203d65..8df25f1079ba 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1513,6 +1513,16 @@ config SENSORS_NZXT_KRAKEN2 This driver can also be built as a module. If so, the module will be called nzxt-kraken2. +config SENSORS_NZXT_SMART2 + tristate "NZXT RGB & Fan Controller/Smart Device v2" + depends on USB_HID + help + If you say yes here you get support for hardware monitoring for the + NZXT RGB & Fan Controller/Smart Device v2. + + This driver can also be built as a module. If so, the module + will be called nzxt-smart2. + source "drivers/hwmon/occ/Kconfig" config SENSORS_PCF8591 diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 3a1551b3d570..185f946d698b 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -160,6 +160,7 @@ obj-$(CONFIG_SENSORS_NPCM7XX) += npcm750-pwm-fan.o obj-$(CONFIG_SENSORS_NSA320) += nsa320-hwmon.o obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o obj-$(CONFIG_SENSORS_NZXT_KRAKEN2) += nzxt-kraken2.o +obj-$(CONFIG_SENSORS_NZXT_SMART2) += nzxt-smart2.o obj-$(CONFIG_SENSORS_PC87360) += pc87360.o obj-$(CONFIG_SENSORS_PC87427) += pc87427.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o diff --git a/drivers/hwmon/nzxt-smart2.c b/drivers/hwmon/nzxt-smart2.c new file mode 100644 index 000000000000..534d39b8908e --- /dev/null +++ b/drivers/hwmon/nzxt-smart2.c @@ -0,0 +1,829 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Reverse-engineered NZXT RGB & Fan Controller/Smart Device v2 driver. + * + * Copyright (c) 2021 Aleksandr Mezin + */ + +#include <linux/hid.h> +#include <linux/hwmon.h> +#include <linux/math.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/spinlock.h> +#include <linux/wait.h> + +#include <asm/byteorder.h> +#include <asm/unaligned.h> + +/* + * The device has only 3 fan channels/connectors. But all HID reports have + * space reserved for up to 8 channels. + */ +#define FAN_CHANNELS 3 +#define FAN_CHANNELS_MAX 8 + +#define UPDATE_INTERVAL_DEFAULT_MS 1000 + +/* These strings match labels on the device exactly */ +static const char *const fan_label[] = { + "FAN 1", + "FAN 2", + "FAN 3", +}; + +static const char *const curr_label[] = { + "FAN 1 Current", + "FAN 2 Current", + "FAN 3 Current", +}; + +static const char *const in_label[] = { + "FAN 1 Voltage", + "FAN 2 Voltage", + "FAN 3 Voltage", +}; + +enum { + INPUT_REPORT_ID_FAN_CONFIG = 0x61, + INPUT_REPORT_ID_FAN_STATUS = 0x67, +}; + +enum { + FAN_STATUS_REPORT_SPEED = 0x02, + FAN_STATUS_REPORT_VOLTAGE = 0x04, +}; + +enum { + FAN_TYPE_NONE = 0, + FAN_TYPE_DC = 1, + FAN_TYPE_PWM = 2, +}; + +struct unknown_static_data { + /* + * Some configuration data? Stays the same after fan speed changes, + * changes in fan configuration, reboots and driver reloads. + * + * The same data in multiple report types. + * + * Byte 12 seems to be the number of fan channels, but I am not sure. + */ + u8 unknown1[14]; +} __packed; + +/* + * The device sends this input report in response to "detect fans" command: + * a 2-byte output report { 0x60, 0x03 }. + */ +struct fan_config_report { + /* report_id should be INPUT_REPORT_ID_FAN_CONFIG = 0x61 */ + u8 report_id; + /* Always 0x03 */ + u8 magic; + struct unknown_static_data unknown_data; + /* Fan type as detected by the device. See FAN_TYPE_* enum. */ + u8 fan_type[FAN_CHANNELS_MAX]; +} __packed; + +/* + * The device sends these reports at a fixed interval (update interval) - + * one report with type = FAN_STATUS_REPORT_SPEED, and one report with type = + * FAN_STATUS_REPORT_VOLTAGE per update interval. + */ +struct fan_status_report { + /* report_id should be INPUT_REPORT_ID_STATUS = 0x67 */ + u8 report_id; + /* FAN_STATUS_REPORT_SPEED = 0x02 or FAN_STATUS_REPORT_VOLTAGE = 0x04 */ + u8 type; + struct unknown_static_data unknown_data; + /* Fan type as detected by the device. See FAN_TYPE_* enum. */ + u8 fan_type[FAN_CHANNELS_MAX]; + + union { + /* When type == FAN_STATUS_REPORT_SPEED */ + struct { + /* + * Fan speed, in RPM. Zero for channels without fans + * connected. + */ + __le16 fan_rpm[FAN_CHANNELS_MAX]; + /* + * Fan duty cycle, in percent. Non-zero even for + * channels without fans connected. + */ + u8 duty_percent[FAN_CHANNELS_MAX]; + /* + * Exactly the same values as duty_percent[], non-zero + * for disconnected fans too. + */ + u8 duty_percent_dup[FAN_CHANNELS_MAX]; + /* "Case Noise" in db */ + u8 noise_db; + } __packed fan_speed; + /* When type == FAN_STATUS_REPORT_VOLTAGE */ + struct { + /* + * Voltage, in millivolts. Non-zero even when fan is + * not connected. + */ + __le16 fan_in[FAN_CHANNELS_MAX]; + /* + * Current, in milliamperes. Near-zero when + * disconnected. + */ + __le16 fan_current[FAN_CHANNELS_MAX]; + } __packed fan_voltage; + } __packed; +} __packed; + +#define OUTPUT_REPORT_SIZE 64 + +enum { + OUTPUT_REPORT_ID_INIT_COMMAND = 0x60, + OUTPUT_REPORT_ID_SET_FAN_SPEED = 0x62, +}; + +enum { + INIT_COMMAND_SET_UPDATE_INTERVAL = 0x02, + INIT_COMMAND_DETECT_FANS = 0x03, +}; + +/* + * This output report sets pwm duty cycle/target fan speed for one or more + * channels. + */ +struct set_fan_speed_report { + /* report_id should be OUTPUT_REPORT_ID_SET_FAN_SPEED = 0x62 */ + u8 report_id; + /* Should be 0x01 */ + u8 magic; + /* To change fan speed on i-th channel, set i-th bit here */ + u8 channel_bit_mask; + /* + * Fan duty cycle/target speed in percent. For voltage-controlled fans, + * the minimal voltage (duty_percent = 1) is about 9V. + * Setting duty_percent to 0 (if the channel is selected in + * channel_bit_mask) turns off the fan completely (regardless of the + * control mode). + */ + u8 duty_percent[FAN_CHANNELS_MAX]; +} __packed; + +struct drvdata { + struct hid_device *hid; + struct device *hwmon; + + u8 fan_duty_percent[FAN_CHANNELS]; + u16 fan_rpm[FAN_CHANNELS]; + bool pwm_status_received; + + u16 fan_in[FAN_CHANNELS]; + u16 fan_curr[FAN_CHANNELS]; + bool voltage_status_received; + + u8 fan_type[FAN_CHANNELS]; + bool fan_config_received; + + /* + * wq is used to wait for *_received flags to become true. + * All accesses to *_received flags and fan_* arrays are performed with + * wq.lock held. + */ + wait_queue_head_t wq; + /* + * mutex is used to: + * 1) Prevent concurrent conflicting changes to update interval and pwm + * values (after sending an output hid report, the corresponding field + * in drvdata must be updated, and only then new output reports can be + * sent). + * 2) Synchronize access to output_buffer (well, the buffer is here, + * because synchronization is necessary anyway - so why not get rid of + * a kmalloc?). + */ + struct mutex mutex; + long update_interval; + u8 output_buffer[OUTPUT_REPORT_SIZE]; +}; + +static long scale_pwm_value(long val, long orig_max, long new_max) +{ + if (val <= 0) + return 0; + + /* + * Positive values should not become zero: 0 completely turns off the + * fan. + */ + return max(1L, DIV_ROUND_CLOSEST(min(val, orig_max) * new_max, orig_max)); +} + +static void handle_fan_config_report(struct drvdata *drvdata, void *data, int size) +{ + struct fan_config_report *report = data; + int i; + + if (size < sizeof(struct fan_config_report)) + return; + + if (report->magic != 0x03) + return; + + spin_lock(&drvdata->wq.lock); + + for (i = 0; i < FAN_CHANNELS; i++) + drvdata->fan_type[i] = report->fan_type[i]; + + drvdata->fan_config_received = true; + wake_up_all_locked(&drvdata->wq); + spin_unlock(&drvdata->wq.lock); +} + +static void handle_fan_status_report(struct drvdata *drvdata, void *data, int size) +{ + struct fan_status_report *report = data; + int i; + + if (size < sizeof(struct fan_status_report)) + return; + + spin_lock(&drvdata->wq.lock); + + /* + * The device sends INPUT_REPORT_ID_FAN_CONFIG = 0x61 report in response + * to "detect fans" command. Only accept other data after getting 0x61, + * to make sure that fan detection is complete. In particular, fan + * detection resets pwm values. + */ + if (!drvdata->fan_config_received) { + spin_unlock(&drvdata->wq.lock); + return; + } + + for (i = 0; i < FAN_CHANNELS; i++) { + if (drvdata->fan_type[i] == report->fan_type[i]) + continue; + + /* + * This should not happen (if my expectations about the device + * are correct). + * + * Even if the userspace sends fan detect command through + * hidraw, fan config report should arrive first. + */ + hid_warn_once(drvdata->hid, + "Fan %d type changed unexpectedly from %d to %d", + i, drvdata->fan_type[i], report->fan_type[i]); + drvdata->fan_type[i] = report->fan_type[i]; + } + + switch (report->type) { + case FAN_STATUS_REPORT_SPEED: + for (i = 0; i < FAN_CHANNELS; i++) { + drvdata->fan_rpm[i] = + get_unaligned_le16(&report->fan_speed.fan_rpm[i]); + drvdata->fan_duty_percent[i] = + report->fan_speed.duty_percent[i]; + } + + drvdata->pwm_status_received = true; + wake_up_all_locked(&drvdata->wq); + break; + + case FAN_STATUS_REPORT_VOLTAGE: + for (i = 0; i < FAN_CHANNELS; i++) { + drvdata->fan_in[i] = + get_unaligned_le16(&report->fan_voltage.fan_in[i]); + drvdata->fan_curr[i] = + get_unaligned_le16(&report->fan_voltage.fan_current[i]); + } + + drvdata->voltage_status_received = true; + wake_up_all_locked(&drvdata->wq); + break; + } + + spin_unlock(&drvdata->wq.lock); +} + +static umode_t nzxt_smart2_hwmon_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + switch (type) { + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + case hwmon_pwm_enable: + return 0644; + + default: + return 0444; + } + + case hwmon_chip: + switch (attr) { + case hwmon_chip_update_interval: + return 0644; + + default: + return 0444; + } + + default: + return 0444; + } +} + +static int nzxt_smart2_hwmon_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct drvdata *drvdata = dev_get_drvdata(dev); + int res = -EINVAL; + + if (type == hwmon_chip) { + switch (attr) { + case hwmon_chip_update_interval: + *val = drvdata->update_interval; + return 0; + + default: + return -EINVAL; + } + } + + spin_lock_irq(&drvdata->wq.lock); + + switch (type) { + case hwmon_pwm: + /* + * fancontrol: + * 1) remembers pwm* values when it starts + * 2) needs pwm*_enable to be 1 on controlled fans + * So make sure we have correct data before allowing pwm* reads. + * Returning errors for pwm of fan speed read can even cause + * fancontrol to shut down. So the wait is unavoidable. + */ + switch (attr) { + case hwmon_pwm_enable: + res = wait_event_interruptible_locked_irq(drvdata->wq, + drvdata->fan_config_received); + if (res) + goto unlock; + + *val = drvdata->fan_type[channel] != FAN_TYPE_NONE; + break; + + case hwmon_pwm_mode: + res = wait_event_interruptible_locked_irq(drvdata->wq, + drvdata->fan_config_received); + if (res) + goto unlock; + + *val = drvdata->fan_type[channel] == FAN_TYPE_PWM; + break; + + case hwmon_pwm_input: + res = wait_event_interruptible_locked_irq(drvdata->wq, + drvdata->pwm_status_received); + if (res) + goto unlock; + + *val = scale_pwm_value(drvdata->fan_duty_percent[channel], + 100, 255); + break; + } + break; + + case hwmon_fan: + /* + * It's not strictly necessary to wait for *_received in the + * remaining cases (fancontrol doesn't care about them). But I'm + * doing it to have consistent behavior. + */ + if (attr == hwmon_fan_input) { + res = wait_event_interruptible_locked_irq(drvdata->wq, + drvdata->pwm_status_received); + if (res) + goto unlock; + + *val = drvdata->fan_rpm[channel]; + } + break; + + case hwmon_in: + if (attr == hwmon_in_input) { + res = wait_event_interruptible_locked_irq(drvdata->wq, + drvdata->voltage_status_received); + if (res) + goto unlock; + + *val = drvdata->fan_in[channel]; + } + break; + + case hwmon_curr: + if (attr == hwmon_curr_input) { + res = wait_event_interruptible_locked_irq(drvdata->wq, + drvdata->voltage_status_received); + if (res) + goto unlock; + + *val = drvdata->fan_curr[channel]; + } + break; + + default: + break; + } + +unlock: + spin_unlock_irq(&drvdata->wq.lock); + return res; +} + +static int send_output_report(struct drvdata *drvdata, const void *data, + size_t data_size) +{ + int ret; + + if (data_size > sizeof(drvdata->output_buffer)) + return -EINVAL; + + memcpy(drvdata->output_buffer, data, data_size); + + if (data_size < sizeof(drvdata->output_buffer)) + memset(drvdata->output_buffer + data_size, 0, + sizeof(drvdata->output_buffer) - data_size); + + ret = hid_hw_output_report(drvdata->hid, drvdata->output_buffer, + sizeof(drvdata->output_buffer)); + return ret < 0 ? ret : 0; +} + +static int set_pwm(struct drvdata *drvdata, int channel, long val) +{ + int ret; + u8 duty_percent = scale_pwm_value(val, 255, 100); + + struct set_fan_speed_report report = { + .report_id = OUTPUT_REPORT_ID_SET_FAN_SPEED, + .magic = 1, + .channel_bit_mask = 1 << channel + }; + + ret = mutex_lock_interruptible(&drvdata->mutex); + if (ret) + return ret; + + report.duty_percent[channel] = duty_percent; + ret = send_output_report(drvdata, &report, sizeof(report)); + if (ret) + goto unlock; + + /* + * pwmconfig and fancontrol scripts expect pwm writes to take effect + * immediately (i. e. read from pwm* sysfs should return the value + * written into it). The device seems to always accept pwm values - even + * when there is no fan connected - so update pwm status without waiting + * for a report, to make pwmconfig and fancontrol happy. Worst case - + * if the device didn't accept new pwm value for some reason (never seen + * this in practice) - it will be reported incorrectly only until next + * update. This avoids "fan stuck" messages from pwmconfig, and + * fancontrol setting fan speed to 100% during shutdown. + */ + spin_lock_bh(&drvdata->wq.lock); + drvdata->fan_duty_percent[channel] = duty_percent; + spin_unlock_bh(&drvdata->wq.lock); + +unlock: + mutex_unlock(&drvdata->mutex); + return ret; +} + +/* + * Workaround for fancontrol/pwmconfig trying to write to pwm*_enable even if it + * already is 1 and read-only. Otherwise, fancontrol won't restore pwm on + * shutdown properly. + */ +static int set_pwm_enable(struct drvdata *drvdata, int channel, long val) +{ + long expected_val; + int res; + + spin_lock_irq(&drvdata->wq.lock); + + res = wait_event_interruptible_locked_irq(drvdata->wq, + drvdata->fan_config_received); + if (res) { + spin_unlock_irq(&drvdata->wq.lock); + return res; + } + + expected_val = drvdata->fan_type[channel] != FAN_TYPE_NONE; + + spin_unlock_irq(&drvdata->wq.lock); + + return (val == expected_val) ? 0 : -EOPNOTSUPP; +} + +/* + * Control byte | Actual update interval in seconds + * 0xff | 65.5 + * 0xf7 | 63.46 + * 0x7f | 32.74 + * 0x3f | 16.36 + * 0x1f | 8.17 + * 0x0f | 4.07 + * 0x07 | 2.02 + * 0x03 | 1.00 + * 0x02 | 0.744 + * 0x01 | 0.488 + * 0x00 | 0.25 + */ +static u8 update_interval_to_control_byte(long interval) +{ + if (interval <= 250) + return 0; + + return clamp_val(1 + DIV_ROUND_CLOSEST(interval - 488, 256), 0, 255); +} + +static long control_byte_to_update_interval(u8 control_byte) +{ + if (control_byte == 0) + return 250; + + return 488 + (control_byte - 1) * 256; +} + +static int set_update_interval(struct drvdata *drvdata, long val) +{ + u8 control = update_interval_to_control_byte(val); + u8 report[] = { + OUTPUT_REPORT_ID_INIT_COMMAND, + INIT_COMMAND_SET_UPDATE_INTERVAL, + 0x01, + 0xe8, + control, + 0x01, + 0xe8, + control, + }; + int ret; + + ret = send_output_report(drvdata, report, sizeof(report)); + if (ret) + return ret; + + drvdata->update_interval = control_byte_to_update_interval(control); + return 0; +} + +static int init_device(struct drvdata *drvdata, long update_interval) +{ + int ret; + u8 detect_fans_report[] = { + OUTPUT_REPORT_ID_INIT_COMMAND, + INIT_COMMAND_DETECT_FANS, + }; + + ret = send_output_report(drvdata, detect_fans_report, + sizeof(detect_fans_report)); + if (ret) + return ret; + + return set_update_interval(drvdata, update_interval); +} + +static int nzxt_smart2_hwmon_write(struct device *dev, + enum hwmon_sensor_types type, u32 attr, + int channel, long val) +{ + struct drvdata *drvdata = dev_get_drvdata(dev); + int ret; + + switch (type) { + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_enable: + return set_pwm_enable(drvdata, channel, val); + + case hwmon_pwm_input: + return set_pwm(drvdata, channel, val); + + default: + return -EINVAL; + } + + case hwmon_chip: + switch (attr) { + case hwmon_chip_update_interval: + ret = mutex_lock_interruptible(&drvdata->mutex); + if (ret) + return ret; + + ret = set_update_interval(drvdata, val); + + mutex_unlock(&drvdata->mutex); + return ret; + + default: + return -EINVAL; + } + + default: + return -EINVAL; + } +} + +static int nzxt_smart2_hwmon_read_string(struct device *dev, + enum hwmon_sensor_types type, u32 attr, + int channel, const char **str) +{ + switch (type) { + case hwmon_fan: + *str = fan_label[channel]; + return 0; + case hwmon_curr: + *str = curr_label[channel]; + return 0; + case hwmon_in: + *str = in_label[channel]; + return 0; + default: + return -EINVAL; + } +} + +static const struct hwmon_ops nzxt_smart2_hwmon_ops = { + .is_visible = nzxt_smart2_hwmon_is_visible, + .read = nzxt_smart2_hwmon_read, + .read_string = nzxt_smart2_hwmon_read_string, + .write = nzxt_smart2_hwmon_write, +}; + +static const struct hwmon_channel_info *nzxt_smart2_channel_info[] = { + HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL), + HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT | HWMON_PWM_MODE | HWMON_PWM_ENABLE, + HWMON_PWM_INPUT | HWMON_PWM_MODE | HWMON_PWM_ENABLE, + HWMON_PWM_INPUT | HWMON_PWM_MODE | HWMON_PWM_ENABLE), + HWMON_CHANNEL_INFO(in, HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL), + HWMON_CHANNEL_INFO(curr, HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL), + HWMON_CHANNEL_INFO(chip, HWMON_C_UPDATE_INTERVAL), + NULL +}; + +static const struct hwmon_chip_info nzxt_smart2_chip_info = { + .ops = &nzxt_smart2_hwmon_ops, + .info = nzxt_smart2_channel_info, +}; + +static int nzxt_smart2_hid_raw_event(struct hid_device *hdev, + struct hid_report *report, u8 *data, int size) +{ + struct drvdata *drvdata = hid_get_drvdata(hdev); + u8 report_id = *data; + + switch (report_id) { + case INPUT_REPORT_ID_FAN_CONFIG: + handle_fan_config_report(drvdata, data, size); + break; + + case INPUT_REPORT_ID_FAN_STATUS: + handle_fan_status_report(drvdata, data, size); + break; + } + + return 0; +} + +static int nzxt_smart2_hid_reset_resume(struct hid_device *hdev) +{ + struct drvdata *drvdata = hid_get_drvdata(hdev); + + /* + * Userspace is still frozen (so no concurrent sysfs attribute access + * is possible), but raw_event can already be called concurrently. + */ + spin_lock_bh(&drvdata->wq.lock); + drvdata->fan_config_received = false; + drvdata->pwm_status_received = false; + drvdata->voltage_status_received = false; + spin_unlock_bh(&drvdata->wq.lock); + + return init_device(drvdata, drvdata->update_interval); +} + +static int nzxt_smart2_hid_probe(struct hid_device *hdev, + const struct hid_device_id *id) +{ + struct drvdata *drvdata; + int ret; + + drvdata = devm_kzalloc(&hdev->dev, sizeof(struct drvdata), GFP_KERNEL); + if (!drvdata) + return -ENOMEM; + + drvdata->hid = hdev; + hid_set_drvdata(hdev, drvdata); + + init_waitqueue_head(&drvdata->wq); + + mutex_init(&drvdata->mutex); + devm_add_action(&hdev->dev, (void (*)(void *))mutex_destroy, + &drvdata->mutex); + + ret = hid_parse(hdev); + if (ret) + return ret; + + ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW); + if (ret) + return ret; + + ret = hid_hw_open(hdev); + if (ret) + goto out_hw_stop; + + hid_device_io_start(hdev); + + init_device(drvdata, UPDATE_INTERVAL_DEFAULT_MS); + + drvdata->hwmon = + hwmon_device_register_with_info(&hdev->dev, "nzxtsmart2", drvdata, + &nzxt_smart2_chip_info, NULL); + if (IS_ERR(drvdata->hwmon)) { + ret = PTR_ERR(drvdata->hwmon); + goto out_hw_close; + } + + return 0; + +out_hw_close: + hid_hw_close(hdev); + +out_hw_stop: + hid_hw_stop(hdev); + return ret; +} + +static void nzxt_smart2_hid_remove(struct hid_device *hdev) +{ + struct drvdata *drvdata = hid_get_drvdata(hdev); + + hwmon_device_unregister(drvdata->hwmon); + + hid_hw_close(hdev); + hid_hw_stop(hdev); +} + +static const struct hid_device_id nzxt_smart2_hid_id_table[] = { + { HID_USB_DEVICE(0x1e71, 0x2006) }, /* NZXT Smart Device V2 */ + { HID_USB_DEVICE(0x1e71, 0x200d) }, /* NZXT Smart Device V2 */ + { HID_USB_DEVICE(0x1e71, 0x2009) }, /* NZXT RGB & Fan Controller */ + { HID_USB_DEVICE(0x1e71, 0x200e) }, /* NZXT RGB & Fan Controller */ + { HID_USB_DEVICE(0x1e71, 0x2010) }, /* NZXT RGB & Fan Controller */ + {}, +}; + +static struct hid_driver nzxt_smart2_hid_driver = { + .name = "nzxt-smart2", + .id_table = nzxt_smart2_hid_id_table, + .probe = nzxt_smart2_hid_probe, + .remove = nzxt_smart2_hid_remove, + .raw_event = nzxt_smart2_hid_raw_event, +#ifdef CONFIG_PM + .reset_resume = nzxt_smart2_hid_reset_resume, +#endif +}; + +static int __init nzxt_smart2_init(void) +{ + return hid_register_driver(&nzxt_smart2_hid_driver); +} + +static void __exit nzxt_smart2_exit(void) +{ + hid_unregister_driver(&nzxt_smart2_hid_driver); +} + +MODULE_DEVICE_TABLE(hid, nzxt_smart2_hid_id_table); +MODULE_AUTHOR("Aleksandr Mezin <mezin.alexander@gmail.com>"); +MODULE_DESCRIPTION("Driver for NZXT RGB & Fan Controller/Smart Device V2"); +MODULE_LICENSE("GPL"); + +/* + * With module_init()/module_hid_driver() and the driver built into the kernel: + * + * Driver 'nzxt_smart2' was unable to register with bus_type 'hid' because the + * bus was not initialized. + */ +late_initcall(nzxt_smart2_init); +module_exit(nzxt_smart2_exit); |