summaryrefslogtreecommitdiff
path: root/drivers/counter
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/counter')
-rw-r--r--drivers/counter/104-quad-8.c167
-rw-r--r--drivers/counter/Kconfig6
2 files changed, 164 insertions, 9 deletions
diff --git a/drivers/counter/104-quad-8.c b/drivers/counter/104-quad-8.c
index a56751bf1e9b..1cbd60aaed69 100644
--- a/drivers/counter/104-quad-8.c
+++ b/drivers/counter/104-quad-8.c
@@ -11,6 +11,7 @@
#include <linux/errno.h>
#include <linux/io.h>
#include <linux/ioport.h>
+#include <linux/interrupt.h>
#include <linux/isa.h>
#include <linux/kernel.h>
#include <linux/module.h>
@@ -25,6 +26,10 @@ static unsigned int num_quad8;
module_param_hw_array(base, uint, ioport, &num_quad8, 0);
MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses");
+static unsigned int irq[max_num_isa_dev(QUAD8_EXTENT)];
+module_param_hw_array(irq, uint, irq, NULL, 0);
+MODULE_PARM_DESC(irq, "ACCES 104-QUAD-8 interrupt line numbers");
+
#define QUAD8_NUM_COUNTERS 8
/**
@@ -38,6 +43,8 @@ MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses");
* @quadrature_scale: array of quadrature mode scale configurations
* @ab_enable: array of A and B inputs enable configurations
* @preset_enable: array of set_to_preset_on_index attribute configurations
+ * @irq_trigger: array of current IRQ trigger function configurations
+ * @next_irq_trigger: array of next IRQ trigger function configurations
* @synchronous_mode: array of index function synchronous mode configurations
* @index_polarity: array of index function polarity configurations
* @cable_fault_enable: differential encoder cable status enable configurations
@@ -53,13 +60,17 @@ struct quad8 {
unsigned int quadrature_scale[QUAD8_NUM_COUNTERS];
unsigned int ab_enable[QUAD8_NUM_COUNTERS];
unsigned int preset_enable[QUAD8_NUM_COUNTERS];
+ unsigned int irq_trigger[QUAD8_NUM_COUNTERS];
+ unsigned int next_irq_trigger[QUAD8_NUM_COUNTERS];
unsigned int synchronous_mode[QUAD8_NUM_COUNTERS];
unsigned int index_polarity[QUAD8_NUM_COUNTERS];
unsigned int cable_fault_enable;
unsigned int base;
};
+#define QUAD8_REG_INTERRUPT_STATUS 0x10
#define QUAD8_REG_CHAN_OP 0x11
+#define QUAD8_REG_INDEX_INTERRUPT 0x12
#define QUAD8_REG_INDEX_INPUT_LEVELS 0x16
#define QUAD8_DIFF_ENCODER_CABLE_STATUS 0x17
/* Borrow Toggle flip-flop */
@@ -92,8 +103,8 @@ struct quad8 {
#define QUAD8_RLD_CNTR_OUT 0x10
/* Transfer Preset Register LSB to FCK Prescaler */
#define QUAD8_RLD_PRESET_PSC 0x18
-#define QUAD8_CHAN_OP_ENABLE_COUNTERS 0x00
#define QUAD8_CHAN_OP_RESET_COUNTERS 0x01
+#define QUAD8_CHAN_OP_ENABLE_INTERRUPT_FUNC 0x04
#define QUAD8_CMR_QUADRATURE_X1 0x08
#define QUAD8_CMR_QUADRATURE_X2 0x10
#define QUAD8_CMR_QUADRATURE_X4 0x18
@@ -378,13 +389,103 @@ static int quad8_action_read(struct counter_device *counter,
}
}
+enum {
+ QUAD8_EVENT_NONE = -1,
+ QUAD8_EVENT_CARRY = 0,
+ QUAD8_EVENT_COMPARE = 1,
+ QUAD8_EVENT_CARRY_BORROW = 2,
+ QUAD8_EVENT_INDEX = 3,
+};
+
+static int quad8_events_configure(struct counter_device *counter)
+{
+ struct quad8 *const priv = counter->priv;
+ unsigned long irq_enabled = 0;
+ unsigned long irqflags;
+ size_t channel;
+ unsigned long ior_cfg;
+ unsigned long base_offset;
+
+ spin_lock_irqsave(&priv->lock, irqflags);
+
+ /* Enable interrupts for the requested channels, disable for the rest */
+ for (channel = 0; channel < QUAD8_NUM_COUNTERS; channel++) {
+ if (priv->next_irq_trigger[channel] == QUAD8_EVENT_NONE)
+ continue;
+
+ if (priv->irq_trigger[channel] != priv->next_irq_trigger[channel]) {
+ /* Save new IRQ function configuration */
+ priv->irq_trigger[channel] = priv->next_irq_trigger[channel];
+
+ /* Load configuration to I/O Control Register */
+ ior_cfg = priv->ab_enable[channel] |
+ priv->preset_enable[channel] << 1 |
+ priv->irq_trigger[channel] << 3;
+ base_offset = priv->base + 2 * channel + 1;
+ outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
+ }
+
+ /* Reset next IRQ trigger function configuration */
+ priv->next_irq_trigger[channel] = QUAD8_EVENT_NONE;
+
+ /* Enable IRQ line */
+ irq_enabled |= BIT(channel);
+ }
+
+ outb(irq_enabled, priv->base + QUAD8_REG_INDEX_INTERRUPT);
+
+ spin_unlock_irqrestore(&priv->lock, irqflags);
+
+ return 0;
+}
+
+static int quad8_watch_validate(struct counter_device *counter,
+ const struct counter_watch *watch)
+{
+ struct quad8 *const priv = counter->priv;
+
+ if (watch->channel > QUAD8_NUM_COUNTERS - 1)
+ return -EINVAL;
+
+ switch (watch->event) {
+ case COUNTER_EVENT_OVERFLOW:
+ if (priv->next_irq_trigger[watch->channel] == QUAD8_EVENT_NONE)
+ priv->next_irq_trigger[watch->channel] = QUAD8_EVENT_CARRY;
+ else if (priv->next_irq_trigger[watch->channel] != QUAD8_EVENT_CARRY)
+ return -EINVAL;
+ return 0;
+ case COUNTER_EVENT_THRESHOLD:
+ if (priv->next_irq_trigger[watch->channel] == QUAD8_EVENT_NONE)
+ priv->next_irq_trigger[watch->channel] = QUAD8_EVENT_COMPARE;
+ else if (priv->next_irq_trigger[watch->channel] != QUAD8_EVENT_COMPARE)
+ return -EINVAL;
+ return 0;
+ case COUNTER_EVENT_OVERFLOW_UNDERFLOW:
+ if (priv->next_irq_trigger[watch->channel] == QUAD8_EVENT_NONE)
+ priv->next_irq_trigger[watch->channel] = QUAD8_EVENT_CARRY_BORROW;
+ else if (priv->next_irq_trigger[watch->channel] != QUAD8_EVENT_CARRY_BORROW)
+ return -EINVAL;
+ return 0;
+ case COUNTER_EVENT_INDEX:
+ if (priv->next_irq_trigger[watch->channel] == QUAD8_EVENT_NONE)
+ priv->next_irq_trigger[watch->channel] = QUAD8_EVENT_INDEX;
+ else if (priv->next_irq_trigger[watch->channel] != QUAD8_EVENT_INDEX)
+ return -EINVAL;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
static const struct counter_ops quad8_ops = {
.signal_read = quad8_signal_read,
.count_read = quad8_count_read,
.count_write = quad8_count_write,
.function_read = quad8_function_read,
.function_write = quad8_function_write,
- .action_read = quad8_action_read
+ .action_read = quad8_action_read,
+ .events_configure = quad8_events_configure,
+ .watch_validate = quad8_watch_validate,
};
static const char *const quad8_index_polarity_modes[] = {
@@ -579,7 +680,8 @@ static int quad8_count_enable_write(struct counter_device *counter,
priv->ab_enable[count->id] = enable;
- ior_cfg = enable | priv->preset_enable[count->id] << 1;
+ ior_cfg = enable | priv->preset_enable[count->id] << 1 |
+ priv->irq_trigger[count->id] << 3;
/* Load I/O control configuration */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
@@ -728,7 +830,8 @@ static int quad8_count_preset_enable_write(struct counter_device *counter,
priv->preset_enable[count->id] = preset_enable;
- ior_cfg = priv->ab_enable[count->id] | preset_enable << 1;
+ ior_cfg = priv->ab_enable[count->id] | preset_enable << 1 |
+ priv->irq_trigger[count->id] << 3;
/* Load I/O control configuration to Input / Output Control Register */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
@@ -980,11 +1083,54 @@ static struct counter_count quad8_counts[] = {
QUAD8_COUNT(7, "Channel 8 Count")
};
+static irqreturn_t quad8_irq_handler(int irq, void *private)
+{
+ struct quad8 *const priv = private;
+ const unsigned long base = priv->base;
+ unsigned long irq_status;
+ unsigned long channel;
+ u8 event;
+
+ irq_status = inb(base + QUAD8_REG_INTERRUPT_STATUS);
+ if (!irq_status)
+ return IRQ_NONE;
+
+ for_each_set_bit(channel, &irq_status, QUAD8_NUM_COUNTERS) {
+ switch (priv->irq_trigger[channel]) {
+ case QUAD8_EVENT_CARRY:
+ event = COUNTER_EVENT_OVERFLOW;
+ break;
+ case QUAD8_EVENT_COMPARE:
+ event = COUNTER_EVENT_THRESHOLD;
+ break;
+ case QUAD8_EVENT_CARRY_BORROW:
+ event = COUNTER_EVENT_OVERFLOW_UNDERFLOW;
+ break;
+ case QUAD8_EVENT_INDEX:
+ event = COUNTER_EVENT_INDEX;
+ break;
+ default:
+ /* should never reach this path */
+ WARN_ONCE(true, "invalid interrupt trigger function %u configured for channel %lu\n",
+ priv->irq_trigger[channel], channel);
+ continue;
+ }
+
+ counter_push_event(&priv->counter, event, channel);
+ }
+
+ /* Clear pending interrupts on device */
+ outb(QUAD8_CHAN_OP_ENABLE_INTERRUPT_FUNC, base + QUAD8_REG_CHAN_OP);
+
+ return IRQ_HANDLED;
+}
+
static int quad8_probe(struct device *dev, unsigned int id)
{
struct quad8 *priv;
int i, j;
unsigned int base_offset;
+ int err;
if (!devm_request_region(dev, base[id], QUAD8_EXTENT, dev_name(dev))) {
dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
@@ -1009,6 +1155,8 @@ static int quad8_probe(struct device *dev, unsigned int id)
spin_lock_init(&priv->lock);
+ /* Reset Index/Interrupt Register */
+ outb(0x00, base[id] + QUAD8_REG_INDEX_INTERRUPT);
/* Reset all counters and disable interrupt function */
outb(QUAD8_CHAN_OP_RESET_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
/* Set initial configuration for all counters */
@@ -1035,11 +1183,18 @@ static int quad8_probe(struct device *dev, unsigned int id)
outb(QUAD8_CTR_IOR, base_offset + 1);
/* Disable index function; negative index polarity */
outb(QUAD8_CTR_IDR, base_offset + 1);
+ /* Initialize next IRQ trigger function configuration */
+ priv->next_irq_trigger[i] = QUAD8_EVENT_NONE;
}
/* Disable Differential Encoder Cable Status for all channels */
outb(0xFF, base[id] + QUAD8_DIFF_ENCODER_CABLE_STATUS);
- /* Enable all counters */
- outb(QUAD8_CHAN_OP_ENABLE_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
+ /* Enable all counters and enable interrupt function */
+ outb(QUAD8_CHAN_OP_ENABLE_INTERRUPT_FUNC, base[id] + QUAD8_REG_CHAN_OP);
+
+ err = devm_request_irq(dev, irq[id], quad8_irq_handler, IRQF_SHARED,
+ priv->counter.name, priv);
+ if (err)
+ return err;
return devm_counter_register(dev, &priv->counter);
}
diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig
index d5d2540b30c2..3dcdb681c4e4 100644
--- a/drivers/counter/Kconfig
+++ b/drivers/counter/Kconfig
@@ -23,11 +23,11 @@ config 104_QUAD_8
A counter's respective error flag may be cleared by performing a write
operation on the respective count value attribute. Although the
104-QUAD-8 counters have a 25-bit range, only the lower 24 bits may be
- set, either directly or via the counter's preset attribute. Interrupts
- are not supported by this driver.
+ set, either directly or via the counter's preset attribute.
The base port addresses for the devices may be configured via the base
- array module parameter.
+ array module parameter. The interrupt line numbers for the devices may
+ be configured via the irq array module parameter.
config INTERRUPT_CNT
tristate "Interrupt counter driver"