diff options
Diffstat (limited to 'drivers/clk/tegra/clk-tegra124.c')
| -rw-r--r-- | drivers/clk/tegra/clk-tegra124.c | 156 |
1 files changed, 2 insertions, 154 deletions
diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c index f4fbbf16a056..a112d3d2bff1 100644 --- a/drivers/clk/tegra/clk-tegra124.c +++ b/drivers/clk/tegra/clk-tegra124.c @@ -99,32 +99,6 @@ #define CCLKG_BURST_POLICY 0x368 -#define UTMIP_PLL_CFG2 0x488 -#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6) -#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4) - -#define UTMIP_PLL_CFG1 0x484 -#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6) -#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) -#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17) -#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16) -#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15) -#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14) -#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12) - -#define UTMIPLL_HW_PWRDN_CFG0 0x52c -#define UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE BIT(25) -#define UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24) -#define UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET BIT(6) -#define UTMIPLL_HW_PWRDN_CFG0_SEQ_RESET_INPUT_VALUE BIT(5) -#define UTMIPLL_HW_PWRDN_CFG0_SEQ_IN_SWCTL BIT(4) -#define UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2) -#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE BIT(1) -#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0) - /* Tegra CPU clock and reset control regs */ #define CLK_RST_CONTROLLER_CPU_CMPLX_STATUS 0x470 @@ -764,43 +738,6 @@ static struct tegra_clk_pll_params pll_u_params = { TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE, }; -struct utmi_clk_param { - /* Oscillator Frequency in KHz */ - u32 osc_frequency; - /* UTMIP PLL Enable Delay Count */ - u8 enable_delay_count; - /* UTMIP PLL Stable count */ - u8 stable_count; - /* UTMIP PLL Active delay count */ - u8 active_delay_count; - /* UTMIP PLL Xtal frequency count */ - u8 xtal_freq_count; -}; - -static const struct utmi_clk_param utmi_parameters[] = { - { - .osc_frequency = 13000000, .enable_delay_count = 0x02, - .stable_count = 0x33, .active_delay_count = 0x05, - .xtal_freq_count = 0x7f - }, { - .osc_frequency = 19200000, .enable_delay_count = 0x03, - .stable_count = 0x4b, .active_delay_count = 0x06, - .xtal_freq_count = 0xbb - }, { - .osc_frequency = 12000000, .enable_delay_count = 0x02, - .stable_count = 0x2f, .active_delay_count = 0x04, - .xtal_freq_count = 0x76 - }, { - .osc_frequency = 26000000, .enable_delay_count = 0x04, - .stable_count = 0x66, .active_delay_count = 0x09, - .xtal_freq_count = 0xfe - }, { - .osc_frequency = 16800000, .enable_delay_count = 0x03, - .stable_count = 0x41, .active_delay_count = 0x0a, - .xtal_freq_count = 0xa4 - }, -}; - static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = { [tegra_clk_ispb] = { .dt_id = TEGRA124_CLK_ISPB, .present = true }, [tegra_clk_rtc] = { .dt_id = TEGRA124_CLK_RTC, .present = true }, @@ -1063,88 +1000,6 @@ static struct tegra_devclk devclks[] __initdata = { static struct clk **clks; -static void tegra124_utmi_param_configure(void __iomem *clk_base) -{ - unsigned int i; - u32 reg; - - for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) { - if (osc_freq == utmi_parameters[i].osc_frequency) - break; - } - - if (i >= ARRAY_SIZE(utmi_parameters)) { - pr_err("%s: Unexpected oscillator freq %lu\n", __func__, - osc_freq); - return; - } - - reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2); - - /* Program UTMIP PLL stable and active counts */ - /* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */ - reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0); - reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count); - - reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0); - - reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i]. - active_delay_count); - - /* Remove power downs from UTMIP PLL control bits */ - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN; - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN; - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN; - - writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2); - - /* Program UTMIP PLL delay and oscillator frequency counts */ - reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); - reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0); - - reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i]. - enable_delay_count); - - reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0); - reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(utmi_parameters[i]. - xtal_freq_count); - - /* Remove power downs from UTMIP PLL control bits */ - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN; - reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP; - reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN; - writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); - - /* Setup HW control of UTMIPLL */ - reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); - reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET; - reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL; - reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE; - writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); - - reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP; - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; - writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); - - udelay(1); - - /* Setup SW override of UTMIPLL assuming USB2.0 - ports are assigned to USB2 */ - reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); - reg |= UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL; - reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE; - writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); - - udelay(1); - - /* Enable HW control UTMIPLL */ - reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); - reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE; - writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); -} - static __init void tegra124_periph_clk_init(void __iomem *clk_base, void __iomem *pmc_base) { @@ -1195,7 +1050,6 @@ static __init void tegra124_periph_clk_init(void __iomem *clk_base, static void __init tegra124_pll_init(void __iomem *clk_base, void __iomem *pmc) { - u32 val; struct clk *clk; /* PLLC */ @@ -1256,17 +1110,11 @@ static void __init tegra124_pll_init(void __iomem *clk_base, clks[TEGRA124_CLK_PLL_M_UD] = clk; /* PLLU */ - val = readl(clk_base + pll_u_params.base_reg); - val &= ~BIT(24); /* disable PLLU_OVERRIDE */ - writel(val, clk_base + pll_u_params.base_reg); - - clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc, 0, - &pll_u_params, &pll_u_lock); + clk = tegra_clk_register_pllu_tegra114("pll_u", "pll_ref", clk_base, 0, + &pll_u_params, &pll_u_lock); clk_register_clkdev(clk, "pll_u", NULL); clks[TEGRA124_CLK_PLL_U] = clk; - tegra124_utmi_param_configure(clk_base); - /* PLLU_480M */ clk = clk_register_gate(NULL, "pll_u_480M", "pll_u", CLK_SET_RATE_PARENT, clk_base + PLLU_BASE, |