diff options
Diffstat (limited to 'arch/mips/include/asm/sn')
22 files changed, 939 insertions, 939 deletions
diff --git a/arch/mips/include/asm/sn/addrs.h b/arch/mips/include/asm/sn/addrs.h index 2367b56dcdef..66814f8ba8e8 100644 --- a/arch/mips/include/asm/sn/addrs.h +++ b/arch/mips/include/asm/sn/addrs.h @@ -88,8 +88,8 @@ #define SWIN_SIZE_BITS 24 #define SWIN_SIZE (UINT64_CAST 1 << 24) -#define SWIN_SIZEMASK (SWIN_SIZE - 1) -#define SWIN_WIDGET_MASK 0xF +#define SWIN_SIZEMASK (SWIN_SIZE - 1) +#define SWIN_WIDGET_MASK 0xF /* * Convert smallwindow address to xtalk address. @@ -97,8 +97,8 @@ * 'addr' can be physical or virtual address, but will be converted * to Xtalk address in the range 0 -> SWINZ_SIZEMASK */ -#define SWIN_WIDGETADDR(addr) ((addr) & SWIN_SIZEMASK) -#define SWIN_WIDGETNUM(addr) (((addr) >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK) +#define SWIN_WIDGETADDR(addr) ((addr) & SWIN_SIZEMASK) +#define SWIN_WIDGETNUM(addr) (((addr) >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK) /* * Verify if addr belongs to small window address on node with "nasid" * @@ -108,7 +108,7 @@ * * */ -#define NODE_SWIN_ADDR(nasid, addr) \ +#define NODE_SWIN_ADDR(nasid, addr) \ (((addr) >= NODE_SWIN_BASE(nasid, 0)) && \ ((addr) < (NODE_SWIN_BASE(nasid, HUB_NUM_WIDGET) + SWIN_SIZE)\ )) @@ -150,7 +150,7 @@ #endif -#define HUB_REGISTER_WIDGET 1 +#define HUB_REGISTER_WIDGET 1 #define IALIAS_BASE NODE_SWIN_BASE(0, HUB_REGISTER_WIDGET) #define IALIAS_SIZE 0x800000 /* 8 Megabytes */ #define IS_IALIAS(_a) (((_a) >= IALIAS_BASE) && \ @@ -174,16 +174,16 @@ * WARNING: They won't work in assembler. * * BDDIR_ENTRY_LO returns the address of the low double-word of the dir - * entry corresponding to a physical (Cac or Uncac) address. + * entry corresponding to a physical (Cac or Uncac) address. * BDDIR_ENTRY_HI returns the address of the high double-word of the entry. * BDPRT_ENTRY returns the address of the double-word protection entry - * corresponding to the page containing the physical address. + * corresponding to the page containing the physical address. * BDPRT_ENTRY_S Stores the value into the protection entry. * BDPRT_ENTRY_L Load the value from the protection entry. * BDECC_ENTRY returns the address of the ECC byte corresponding to a - * double-word at a specified physical address. + * double-word at a specified physical address. * BDECC_ENTRY_H returns the address of the two ECC bytes corresponding to a - * quad-word at a specified physical address. + * quad-word at a specified physical address. */ #define NODE_BDOOR_BASE(_n) (NODE_HSPEC_BASE(_n) + (NODE_ADDRSPACE_SIZE/2)) @@ -226,11 +226,11 @@ #define BDADDR_IS_DIR(_ba) ((UINT64_CAST (_ba) & 0x200) != 0) #define BDADDR_IS_PRT(_ba) ((UINT64_CAST (_ba) & 0x200) == 0) -#define BDDIR_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \ +#define BDDIR_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \ (UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2 | \ (UINT64_CAST(_ba) & 0x1f << 4) << 3) -#define BDPRT_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \ +#define BDPRT_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \ (UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2) #define BDECC_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \ @@ -251,23 +251,23 @@ /* * WARNING: * When certain Hub chip workaround are defined, it's not sufficient - * to dereference the *_HUB_ADDR() macros. You should instead use + * to dereference the *_HUB_ADDR() macros. You should instead use * HUB_L() and HUB_S() if you must deal with pointers to hub registers. * Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S(). * They're always safe. */ #define LOCAL_HUB_ADDR(_x) (HUBREG_CAST (IALIAS_BASE + (_x))) -#define REMOTE_HUB_ADDR(_n, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \ +#define REMOTE_HUB_ADDR(_n, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \ 0x800000 + (_x))) #ifdef CONFIG_SGI_IP27 -#define REMOTE_HUB_PI_ADDR(_n, _sn, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \ +#define REMOTE_HUB_PI_ADDR(_n, _sn, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \ 0x800000 + (_x))) #endif /* CONFIG_SGI_IP27 */ #ifndef __ASSEMBLY__ #define HUB_L(_a) *(_a) -#define HUB_S(_a, _d) *(_a) = (_d) +#define HUB_S(_a, _d) *(_a) = (_d) #define LOCAL_HUB_L(_r) HUB_L(LOCAL_HUB_ADDR(_r)) #define LOCAL_HUB_S(_r, _d) HUB_S(LOCAL_HUB_ADDR(_r), (_d)) @@ -330,14 +330,14 @@ #define KLI_LAUNCH 0 /* Dir. entries */ #define KLI_KLCONFIG 1 -#define KLI_NMI 2 +#define KLI_NMI 2 #define KLI_GDA 3 #define KLI_FREEMEM 4 -#define KLI_SYMMON_STK 5 +#define KLI_SYMMON_STK 5 #define KLI_PI_ERROR 6 #define KLI_KERN_VARS 7 -#define KLI_KERN_XP 8 -#define KLI_KERN_PARTID 9 +#define KLI_KERN_XP 8 +#define KLI_KERN_PARTID 9 #ifndef __ASSEMBLY__ @@ -350,8 +350,8 @@ #define KLD_SYMMON_STK(nasid) (KLD_BASE(nasid) + KLI_SYMMON_STK) #define KLD_FREEMEM(nasid) (KLD_BASE(nasid) + KLI_FREEMEM) #define KLD_KERN_VARS(nasid) (KLD_BASE(nasid) + KLI_KERN_VARS) -#define KLD_KERN_XP(nasid) (KLD_BASE(nasid) + KLI_KERN_XP) -#define KLD_KERN_PARTID(nasid) (KLD_BASE(nasid) + KLI_KERN_PARTID) +#define KLD_KERN_XP(nasid) (KLD_BASE(nasid) + KLI_KERN_XP) +#define KLD_KERN_PARTID(nasid) (KLD_BASE(nasid) + KLI_KERN_PARTID) #define LAUNCH_OFFSET(nasid, slice) \ (KLD_LAUNCH(nasid)->offset + \ @@ -365,7 +365,7 @@ KLD_NMI(nasid)->stride * (slice)) #define NMI_ADDR(nasid, slice) \ TO_NODE_UNCAC((nasid), SN_NMI_OFFSET(nasid, slice)) -#define NMI_SIZE(nasid) KLD_NMI(nasid)->size +#define NMI_SIZE(nasid) KLD_NMI(nasid)->size #define KLCONFIG_OFFSET(nasid) KLD_KLCONFIG(nasid)->offset #define KLCONFIG_ADDR(nasid) \ @@ -390,8 +390,8 @@ /* loading symmon 4k below UNIX. the arcs loader needs the topaddr for a * relocatable program */ -#define UNIX_DEBUG_LOADADDR 0x300000 -#define SYMMON_LOADADDR(nasid) \ +#define UNIX_DEBUG_LOADADDR 0x300000 +#define SYMMON_LOADADDR(nasid) \ TO_NODE(nasid, PHYS_TO_K0(UNIX_DEBUG_LOADADDR - 0x1000)) #define FREEMEM_OFFSET(nasid) KLD_FREEMEM(nasid)->offset @@ -420,8 +420,8 @@ #define KERN_VARS_ADDR(nasid) KLD_KERN_VARS(nasid)->pointer #define KERN_VARS_SIZE(nasid) KLD_KERN_VARS(nasid)->size -#define KERN_XP_ADDR(nasid) KLD_KERN_XP(nasid)->pointer -#define KERN_XP_SIZE(nasid) KLD_KERN_XP(nasid)->size +#define KERN_XP_ADDR(nasid) KLD_KERN_XP(nasid)->pointer +#define KERN_XP_SIZE(nasid) KLD_KERN_XP(nasid)->size #define GPDA_ADDR(nasid) TO_NODE_CAC(nasid, GPDA_OFFSET) diff --git a/arch/mips/include/asm/sn/agent.h b/arch/mips/include/asm/sn/agent.h index dc81114d4742..e33d09293019 100644 --- a/arch/mips/include/asm/sn/agent.h +++ b/arch/mips/include/asm/sn/agent.h @@ -25,21 +25,21 @@ */ #if defined(CONFIG_SGI_IP27) -#define HUB_NIC_ADDR(_cpuid) \ - REMOTE_HUB_ADDR(COMPACT_TO_NASID_NODEID(cpu_to_node(_cpuid)), \ +#define HUB_NIC_ADDR(_cpuid) \ + REMOTE_HUB_ADDR(COMPACT_TO_NASID_NODEID(cpu_to_node(_cpuid)), \ MD_MLAN_CTL) #endif -#define SET_HUB_NIC(_my_cpuid, _val) \ +#define SET_HUB_NIC(_my_cpuid, _val) \ (HUB_S(HUB_NIC_ADDR(_my_cpuid), (_val))) -#define SET_MY_HUB_NIC(_v) \ +#define SET_MY_HUB_NIC(_v) \ SET_HUB_NIC(cpuid(), (_v)) -#define GET_HUB_NIC(_my_cpuid) \ +#define GET_HUB_NIC(_my_cpuid) \ (HUB_L(HUB_NIC_ADDR(_my_cpuid))) -#define GET_MY_HUB_NIC() \ +#define GET_MY_HUB_NIC() \ GET_HUB_NIC(cpuid()) #endif /* _ASM_SGI_SN_AGENT_H */ diff --git a/arch/mips/include/asm/sn/arch.h b/arch/mips/include/asm/sn/arch.h index bd75945e10ff..471e6870d876 100644 --- a/arch/mips/include/asm/sn/arch.h +++ b/arch/mips/include/asm/sn/arch.h @@ -28,14 +28,14 @@ typedef u64 hubreg_t; #define INVALID_CNODEID (cnodeid_t)-1 #define INVALID_PNODEID (pnodeid_t)-1 #define INVALID_MODULE (moduleid_t)-1 -#define INVALID_PARTID (partid_t)-1 +#define INVALID_PARTID (partid_t)-1 extern nasid_t get_nasid(void); extern cnodeid_t get_cpu_cnode(cpuid_t); extern int get_cpu_slice(cpuid_t); /* - * NO ONE should access these arrays directly. The only reason we refer to + * NO ONE should access these arrays directly. The only reason we refer to * them here is to avoid the procedure call that would be required in the * macros below. (Really want private data members here :-) */ @@ -44,12 +44,12 @@ extern nasid_t compact_to_nasid_node[MAX_COMPACT_NODES]; /* * These macros are used by various parts of the kernel to convert - * between the three different kinds of node numbering. At least some + * between the three different kinds of node numbering. At least some * of them may change to procedure calls in the future, but the macros * will continue to work. Don't use the arrays above directly. */ -#define NASID_TO_REGION(nnode) \ +#define NASID_TO_REGION(nnode) \ ((nnode) >> \ (is_fine_dirmode() ? NASID_TO_FINEREG_SHFT : NASID_TO_COARSEREG_SHFT)) diff --git a/arch/mips/include/asm/sn/fru.h b/arch/mips/include/asm/sn/fru.h index b3e3606723b7..bbb83257c8e2 100644 --- a/arch/mips/include/asm/sn/fru.h +++ b/arch/mips/include/asm/sn/fru.h @@ -21,24 +21,24 @@ typedef struct kf_mem_s { * is this necessary ? */ confidence_t km_dimm[MAX_DIMMS]; - /* confidence level that dimm[i] is bad + /* confidence level that dimm[i] is bad *I think this is the right number */ } kf_mem_t; typedef struct kf_cpu_s { - confidence_t kc_confidence; /* confidence level that cpu is bad */ - confidence_t kc_icache; /* confidence level that instr. cache is bad */ - confidence_t kc_dcache; /* confidence level that data cache is bad */ - confidence_t kc_scache; /* confidence level that sec. cache is bad */ + confidence_t kc_confidence; /* confidence level that cpu is bad */ + confidence_t kc_icache; /* confidence level that instr. cache is bad */ + confidence_t kc_dcache; /* confidence level that data cache is bad */ + confidence_t kc_scache; /* confidence level that sec. cache is bad */ confidence_t kc_sysbus; /* confidence level that sysad/cmd/state bus is bad */ } kf_cpu_t; typedef struct kf_pci_bus_s { confidence_t kpb_belief; /* confidence level that the pci bus is bad */ confidence_t kpb_pcidev_belief[MAX_PCIDEV]; - /* confidence level that the pci dev is bad */ + /* confidence level that the pci dev is bad */ } kf_pci_bus_t; #endif /* __ASM_SN_FRU_H */ diff --git a/arch/mips/include/asm/sn/gda.h b/arch/mips/include/asm/sn/gda.h index 9cb6ff770915..85fa1b5f639d 100644 --- a/arch/mips/include/asm/sn/gda.h +++ b/arch/mips/include/asm/sn/gda.h @@ -8,7 +8,7 @@ * Copyright (C) 1992 - 1997, 2000 Silicon Graphics, Inc. * * gda.h -- Contains the data structure for the global data area, - * The GDA contains information communicated between the + * The GDA contains information communicated between the * PROM, SYMMON, and the kernel. */ #ifndef _ASM_SN_GDA_H @@ -23,8 +23,8 @@ * * Version # | Change * -------------+------------------------------------------------------- - * 1 | Initial SN0 version - * 2 | Prom sets g_partid field to the partition number. 0 IS + * 1 | Initial SN0 version + * 2 | Prom sets g_partid field to the partition number. 0 IS * | a valid partition #. */ @@ -60,7 +60,7 @@ typedef struct gda { /* Pointer to a mask of nodes with copies * of the kernel. */ char g_padding[56]; /* pad out to 128 bytes */ - nasid_t g_nasidtable[MAX_COMPACT_NODES]; /* NASID of each node, + nasid_t g_nasidtable[MAX_COMPACT_NODES]; /* NASID of each node, * indexed by cnodeid. */ } gda_t; @@ -74,7 +74,7 @@ typedef struct gda { * revisions assume GDA is NOT set up, and read partition * information from the board info. */ -#define PART_GDA_VERSION 2 +#define PART_GDA_VERSION 2 /* * The following requests can be sent to the PROM during startup. @@ -83,17 +83,17 @@ typedef struct gda { #define PROMOP_MAGIC 0x0ead0000 #define PROMOP_MAGIC_MASK 0x0fff0000 -#define PROMOP_BIST_SHIFT 11 -#define PROMOP_BIST_MASK (0x3 << 11) +#define PROMOP_BIST_SHIFT 11 +#define PROMOP_BIST_MASK (0x3 << 11) #define PROMOP_REG PI_ERR_STACK_ADDR_A #define PROMOP_INVALID (PROMOP_MAGIC | 0x00) -#define PROMOP_HALT (PROMOP_MAGIC | 0x10) -#define PROMOP_POWERDOWN (PROMOP_MAGIC | 0x20) -#define PROMOP_RESTART (PROMOP_MAGIC | 0x30) -#define PROMOP_REBOOT (PROMOP_MAGIC | 0x40) -#define PROMOP_IMODE (PROMOP_MAGIC | 0x50) +#define PROMOP_HALT (PROMOP_MAGIC | 0x10) +#define PROMOP_POWERDOWN (PROMOP_MAGIC | 0x20) +#define PROMOP_RESTART (PROMOP_MAGIC | 0x30) +#define PROMOP_REBOOT (PROMOP_MAGIC | 0x40) +#define PROMOP_IMODE (PROMOP_MAGIC | 0x50) #define PROMOP_CMD_MASK 0x00f0 #define PROMOP_OPTIONS_MASK 0xfff0 diff --git a/arch/mips/include/asm/sn/intr.h b/arch/mips/include/asm/sn/intr.h index 6718b644b970..fc1348193957 100644 --- a/arch/mips/include/asm/sn/intr.h +++ b/arch/mips/include/asm/sn/intr.h @@ -14,8 +14,8 @@ #define INT_PEND0_BASELVL 0 #define INT_PEND1_BASELVL 64 -#define N_INTPENDJUNK_BITS 8 -#define INTPENDJUNK_CLRBIT 0x80 +#define N_INTPENDJUNK_BITS 8 +#define INTPENDJUNK_CLRBIT 0x80 /* * Macros to manipulate the interrupt register on the calling hub chip. @@ -32,7 +32,7 @@ * We do an uncached load of the int_pend0 register to ensure this. */ -#define LOCAL_HUB_CLR_INTR(level) \ +#define LOCAL_HUB_CLR_INTR(level) \ do { \ LOCAL_HUB_S(PI_INT_PEND_MOD, (level)); \ LOCAL_HUB_L(PI_INT_PEND0); \ @@ -40,7 +40,7 @@ do { \ #define REMOTE_HUB_CLR_INTR(hub, level) \ do { \ - nasid_t __hub = (hub); \ + nasid_t __hub = (hub); \ \ REMOTE_HUB_S(__hub, PI_INT_PEND_MOD, (level)); \ REMOTE_HUB_L(__hub, PI_INT_PEND0); \ @@ -102,8 +102,8 @@ do { \ #define LLP_PFAIL_INTR_A 41 /* see ml/SN/SN0/sysctlr.c */ #define LLP_PFAIL_INTR_B 42 -#define TLB_INTR_A 43 /* used for tlb flush random */ -#define TLB_INTR_B 44 +#define TLB_INTR_A 43 /* used for tlb flush random */ +#define TLB_INTR_B 44 #define IP27_INTR_0 45 /* Reserved for PROM use */ #define IP27_INTR_1 46 /* do not use in Kernel */ @@ -116,8 +116,8 @@ do { \ #define BRIDGE_ERROR_INTR 53 /* Setup by PROM to catch */ /* Bridge Errors */ -#define DEBUG_INTR_A 54 -#define DEBUG_INTR_B 55 /* Used by symmon to stop all cpus */ +#define DEBUG_INTR_A 54 +#define DEBUG_INTR_B 55 /* Used by symmon to stop all cpus */ #define IO_ERROR_INTR 57 /* Setup by PROM */ #define CLK_ERR_INTR 58 #define COR_ERR_INTR_A 59 diff --git a/arch/mips/include/asm/sn/io.h b/arch/mips/include/asm/sn/io.h index 24c6775fbb0f..d5174d04538c 100644 --- a/arch/mips/include/asm/sn/io.h +++ b/arch/mips/include/asm/sn/io.h @@ -31,7 +31,7 @@ #define HUB_PIO_MAP_TO_MEM 0 #define HUB_PIO_MAP_TO_IO 1 -#define IIO_ITTE_INVALID_WIDGET 3 /* an invalid widget */ +#define IIO_ITTE_INVALID_WIDGET 3 /* an invalid widget */ #define IIO_ITTE_PUT(nasid, bigwin, io_or_mem, widget, addr) \ REMOTE_HUB_S((nasid), IIO_ITTE(bigwin), \ @@ -52,7 +52,7 @@ * value _x is expected to be a widget number in the range * 0, 8 - 0xF */ -#define IIO_IOPRB(_x) (IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \ +#define IIO_IOPRB(_x) (IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \ (_x) : \ (_x) - (HUB_WIDGET_ID_MIN-1)) << 3) ) diff --git a/arch/mips/include/asm/sn/ioc3.h b/arch/mips/include/asm/sn/ioc3.h index 099677774d71..e33f0363235b 100644 --- a/arch/mips/include/asm/sn/ioc3.h +++ b/arch/mips/include/asm/sn/ioc3.h @@ -62,8 +62,8 @@ struct ioc3_sioregs { volatile u8 fill3[0x170 - 0x169 - 1]; - struct ioc3_uartregs uartb; /* 0x20170 */ - struct ioc3_uartregs uarta; /* 0x20178 */ + struct ioc3_uartregs uartb; /* 0x20170 */ + struct ioc3_uartregs uarta; /* 0x20178 */ }; /* Register layout of IOC3 in configuration space. */ @@ -106,7 +106,7 @@ struct ioc3 { volatile u32 ppbr_l_b; /* 0x00094 */ volatile u32 ppcr_b; /* 0x00098 */ - /* Keyboard and Mouse Registers */ + /* Keyboard and Mouse Registers */ volatile u32 km_csr; /* 0x0009c */ volatile u32 k_rd; /* 0x000a0 */ volatile u32 m_rd; /* 0x000a4 */ @@ -208,7 +208,7 @@ struct ioc3_erxbuf { /* * Ethernet TX Descriptor */ -#define ETXD_DATALEN 104 +#define ETXD_DATALEN 104 struct ioc3_etxd { u32 cmd; /* command field */ u32 bufcnt; /* buffer counts field */ diff --git a/arch/mips/include/asm/sn/klconfig.h b/arch/mips/include/asm/sn/klconfig.h index fe02900b930d..467c313d5767 100644 --- a/arch/mips/include/asm/sn/klconfig.h +++ b/arch/mips/include/asm/sn/klconfig.h @@ -8,8 +8,8 @@ * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc. * Copyright (C) 1999, 2000 by Ralf Baechle */ -#ifndef _ASM_SN_KLCONFIG_H -#define _ASM_SN_KLCONFIG_H +#ifndef _ASM_SN_KLCONFIG_H +#define _ASM_SN_KLCONFIG_H /* * The KLCONFIG structures store info about the various BOARDs found @@ -20,11 +20,11 @@ /* * WARNING: * Certain assembly language routines (notably xxxxx.s) in the IP27PROM - * will depend on the format of the data structures in this file. In - * most cases, rearranging the fields can seriously break things. - * Adding fields in the beginning or middle can also break things. - * Add fields if necessary, to the end of a struct in such a way - * that offsets of existing fields do not change. + * will depend on the format of the data structures in this file. In + * most cases, rearranging the fields can seriously break things. + * Adding fields in the beginning or middle can also break things. + * Add fields if necessary, to the end of a struct in such a way + * that offsets of existing fields do not change. */ #include <linux/types.h> @@ -35,7 +35,7 @@ #include <asm/sn/sn0/addrs.h> //#include <sys/SN/router.h> // XXX Stolen from <sys/SN/router.h>: -#define MAX_ROUTER_PORTS (6) /* Max. number of ports on a router */ +#define MAX_ROUTER_PORTS (6) /* Max. number of ports on a router */ #include <asm/sn/fru.h> //#include <sys/graph.h> //#include <sys/xtalk/xbow.h> @@ -63,14 +63,14 @@ typedef u64 nic_t; -#define KLCFGINFO_MAGIC 0xbeedbabe +#define KLCFGINFO_MAGIC 0xbeedbabe typedef s32 klconf_off_t; /* * Some IMPORTANT OFFSETS. These are the offsets on all NODES. */ -#define MAX_MODULE_ID 255 +#define MAX_MODULE_ID 255 #define SIZE_PAD 4096 /* 4k padding for structures */ /* * 1 NODE brd, 2 Router brd (1 8p, 1 meta), 6 Widgets, @@ -86,25 +86,25 @@ typedef s32 klconf_off_t; /* All bits in this field are currently used. Try the pad fields if you need more flag bits */ -#define ENABLE_BOARD 0x01 -#define FAILED_BOARD 0x02 -#define DUPLICATE_BOARD 0x04 /* Boards like midplanes/routers which +#define ENABLE_BOARD 0x01 +#define FAILED_BOARD 0x02 +#define DUPLICATE_BOARD 0x04 /* Boards like midplanes/routers which are discovered twice. Use one of them */ #define VISITED_BOARD 0x08 /* Used for compact hub numbering. */ -#define LOCAL_MASTER_IO6 0x10 /* master io6 for that node */ +#define LOCAL_MASTER_IO6 0x10 /* master io6 for that node */ #define GLOBAL_MASTER_IO6 0x20 -#define THIRD_NIC_PRESENT 0x40 /* for future use */ -#define SECOND_NIC_PRESENT 0x80 /* addons like MIO are present */ +#define THIRD_NIC_PRESENT 0x40 /* for future use */ +#define SECOND_NIC_PRESENT 0x80 /* addons like MIO are present */ /* klinfo->flags fields */ -#define KLINFO_ENABLE 0x01 /* This component is enabled */ -#define KLINFO_FAILED 0x02 /* This component failed */ -#define KLINFO_DEVICE 0x04 /* This component is a device */ -#define KLINFO_VISITED 0x08 /* This component has been visited */ -#define KLINFO_CONTROLLER 0x10 /* This component is a device controller */ -#define KLINFO_INSTALL 0x20 /* Install a driver */ -#define KLINFO_HEADLESS 0x40 /* Headless (or hubless) component */ +#define KLINFO_ENABLE 0x01 /* This component is enabled */ +#define KLINFO_FAILED 0x02 /* This component failed */ +#define KLINFO_DEVICE 0x04 /* This component is a device */ +#define KLINFO_VISITED 0x08 /* This component has been visited */ +#define KLINFO_CONTROLLER 0x10 /* This component is a device controller */ +#define KLINFO_INSTALL 0x20 /* Install a driver */ +#define KLINFO_HEADLESS 0x40 /* Headless (or hubless) component */ #define IS_CONSOLE_IOC3(i) ((((klinfo_t *)i)->flags) & KLINFO_INSTALL) #define GB2 0x80000000 @@ -116,30 +116,30 @@ typedef s32 klconf_off_t; is used in the code to allocate various areas. */ -#define BOARD_STRUCT 0 -#define COMPONENT_STRUCT 1 -#define ERRINFO_STRUCT 2 -#define KLMALLOC_TYPE_MAX (ERRINFO_STRUCT + 1) -#define DEVICE_STRUCT 3 +#define BOARD_STRUCT 0 +#define COMPONENT_STRUCT 1 +#define ERRINFO_STRUCT 2 +#define KLMALLOC_TYPE_MAX (ERRINFO_STRUCT + 1) +#define DEVICE_STRUCT 3 typedef struct console_s { - unsigned long uart_base; - unsigned long config_base; - unsigned long memory_base; + unsigned long uart_base; + unsigned long config_base; + unsigned long memory_base; short baud; short flag; int type; nasid_t nasid; char wid; - char npci; + char npci; nic_t baseio_nic; } console_t; typedef struct klc_malloc_hdr { - klconf_off_t km_base; - klconf_off_t km_limit; - klconf_off_t km_current; + klconf_off_t km_base; + klconf_off_t km_limit; + klconf_off_t km_current; } klc_malloc_hdr_t; /* Functions/macros needed to use this structure */ @@ -148,7 +148,7 @@ typedef struct kl_config_hdr { u64 ch_magic; /* set this to KLCFGINFO_MAGIC */ u32 ch_version; /* structure version number */ klconf_off_t ch_malloc_hdr_off; /* offset of ch_malloc_hdr */ - klconf_off_t ch_cons_off; /* offset of ch_cons */ + klconf_off_t ch_cons_off; /* offset of ch_cons */ klconf_off_t ch_board_info; /* the link list of boards */ console_t ch_cons_info; /* address info of the console */ klc_malloc_hdr_t ch_malloc_hdr[KLMALLOC_TYPE_MAX]; @@ -157,27 +157,27 @@ typedef struct kl_config_hdr { } kl_config_hdr_t; -#define KL_CONFIG_HDR(_nasid) ((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid))) +#define KL_CONFIG_HDR(_nasid) ((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid))) #define KL_CONFIG_INFO_OFFSET(_nasid) \ - (KL_CONFIG_HDR(_nasid)->ch_board_info) + (KL_CONFIG_HDR(_nasid)->ch_board_info) #define KL_CONFIG_INFO_SET_OFFSET(_nasid, _off) \ - (KL_CONFIG_HDR(_nasid)->ch_board_info = (_off)) + (KL_CONFIG_HDR(_nasid)->ch_board_info = (_off)) -#define KL_CONFIG_INFO(_nasid) \ - (lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ? \ +#define KL_CONFIG_INFO(_nasid) \ + (lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ? \ NODE_OFFSET_TO_K1((_nasid), KL_CONFIG_HDR(_nasid)->ch_board_info) : \ 0) #define KL_CONFIG_MAGIC(_nasid) (KL_CONFIG_HDR(_nasid)->ch_magic) #define KL_CONFIG_CHECK_MAGIC(_nasid) \ - (KL_CONFIG_HDR(_nasid)->ch_magic == KLCFGINFO_MAGIC) + (KL_CONFIG_HDR(_nasid)->ch_magic == KLCFGINFO_MAGIC) #define KL_CONFIG_HDR_INIT_MAGIC(_nasid) \ - (KL_CONFIG_HDR(_nasid)->ch_magic = KLCFGINFO_MAGIC) + (KL_CONFIG_HDR(_nasid)->ch_magic = KLCFGINFO_MAGIC) /* --- New Macros for the changed kl_config_hdr_t structure --- */ -#define PTR_CH_MALLOC_HDR(_k) ((klc_malloc_hdr_t *)\ +#define PTR_CH_MALLOC_HDR(_k) ((klc_malloc_hdr_t *)\ ((unsigned long)_k + (_k->ch_malloc_hdr_off))) #define KL_CONFIG_CH_MALLOC_HDR(_n) PTR_CH_MALLOC_HDR(KL_CONFIG_HDR(_n)) @@ -190,29 +190,29 @@ typedef struct kl_config_hdr { /* ------------------------------------------------------------- */ #define KL_CONFIG_INFO_START(_nasid) \ - (klconf_off_t)(KLCONFIG_OFFSET(_nasid) + sizeof(kl_config_hdr_t)) + (klconf_off_t)(KLCONFIG_OFFSET(_nasid) + sizeof(kl_config_hdr_t)) #define KL_CONFIG_BOARD_NASID(_brd) ((_brd)->brd_nasid) #define KL_CONFIG_BOARD_SET_NEXT(_brd, _off) ((_brd)->brd_next = (_off)) -#define KL_CONFIG_DUPLICATE_BOARD(_brd) ((_brd)->brd_flags & DUPLICATE_BOARD) +#define KL_CONFIG_DUPLICATE_BOARD(_brd) ((_brd)->brd_flags & DUPLICATE_BOARD) -#define XBOW_PORT_TYPE_HUB(_xbowp, _link) \ - ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_HUB) -#define XBOW_PORT_TYPE_IO(_xbowp, _link) \ - ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_IO) +#define XBOW_PORT_TYPE_HUB(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_HUB) +#define XBOW_PORT_TYPE_IO(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_IO) -#define XBOW_PORT_IS_ENABLED(_xbowp, _link) \ - ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_ENABLE) -#define XBOW_PORT_NASID(_xbowp, _link) \ - ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_nasid) +#define XBOW_PORT_IS_ENABLED(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_ENABLE) +#define XBOW_PORT_NASID(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_nasid) -#define XBOW_PORT_IO 0x1 -#define XBOW_PORT_HUB 0x2 +#define XBOW_PORT_IO 0x1 +#define XBOW_PORT_HUB 0x2 #define XBOW_PORT_ENABLE 0x4 -#define SN0_PORT_FENCE_SHFT 0 -#define SN0_PORT_FENCE_MASK (1 << SN0_PORT_FENCE_SHFT) +#define SN0_PORT_FENCE_SHFT 0 +#define SN0_PORT_FENCE_MASK (1 << SN0_PORT_FENCE_SHFT) /* * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD @@ -242,28 +242,28 @@ typedef struct kl_config_hdr { * KLCONFIG - +------------+ +------------+ +------------+ +------------+ - | lboard | +-->| lboard | +-->| rboard | +-->| lboard | - +------------+ | +------------+ | +------------+ | +------------+ - | board info | | | board info | | |errinfo,bptr| | | board info | - +------------+ | +------------+ | +------------+ | +------------+ - | offset |--+ | offset |--+ | offset |--+ |offset=NULL | - +------------+ +------------+ +------------+ +------------+ + +------------+ +------------+ +------------+ +------------+ + | lboard | +-->| lboard | +-->| rboard | +-->| lboard | + +------------+ | +------------+ | +------------+ | +------------+ + | board info | | | board info | | |errinfo,bptr| | | board info | + +------------+ | +------------+ | +------------+ | +------------+ + | offset |--+ | offset |--+ | offset |--+ |offset=NULL | + +------------+ +------------+ +------------+ +------------+ +------------+ | board info | - +------------+ +--------------------------------+ + +------------+ +--------------------------------+ | compt 1 |------>| type, rev, diaginfo, size ... | (CPU) - +------------+ +--------------------------------+ + +------------+ +--------------------------------+ | compt 2 |--+ - +------------+ | +--------------------------------+ - | ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK) - +------------+ +--------------------------------+ + +------------+ | +--------------------------------+ + | ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK) + +------------+ +--------------------------------+ | errinfo |--+ - +------------+ | +--------------------------------+ - +--->|r/l brd errinfo,compt err flags | - +--------------------------------+ + +------------+ | +--------------------------------+ + +--->|r/l brd errinfo,compt err flags | + +--------------------------------+ * * Each BOARD consists of COMPONENTs and the BOARD structure has @@ -311,7 +311,7 @@ typedef struct kl_config_hdr { */ #define KL_CPU_R4000 0x1 /* Standard R4000 */ #define KL_CPU_TFP 0x2 /* TFP processor */ -#define KL_CPU_R10000 0x3 /* R10000 (T5) */ +#define KL_CPU_R10000 0x3 /* R10000 (T5) */ #define KL_CPU_NONE (-1) /* no cpu present in slot */ /* @@ -320,13 +320,13 @@ typedef struct kl_config_hdr { #define KLCLASS_MASK 0xf0 #define KLCLASS_NONE 0x00 -#define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */ +#define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */ #define KLCLASS_CPU KLCLASS_NODE -#define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI +#define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI and the non-graphics widget boards */ -#define KLCLASS_ROUTER 0x30 /* Router board */ -#define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board - so that we can record error info */ +#define KLCLASS_ROUTER 0x30 /* Router board */ +#define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board + so that we can record error info */ #define KLCLASS_GFX 0x50 /* graphics boards */ #define KLCLASS_PSEUDO_GFX 0x60 /* HDTV type cards that use a gfx @@ -336,7 +336,7 @@ typedef struct kl_config_hdr { #define KLCLASS_MAX 7 /* Bump this if a new CLASS is added */ #define KLTYPE_MAX 10 /* Bump this if a new CLASS is added */ -#define KLCLASS_UNKNOWN 0xf0 +#define KLCLASS_UNKNOWN 0xf0 #define KLCLASS(_x) ((_x) & KLCLASS_MASK) @@ -353,36 +353,36 @@ typedef struct kl_config_hdr { #define KLTYPE_WEIRDIO (KLCLASS_IO | 0x0) #define KLTYPE_BASEIO (KLCLASS_IO | 0x1) /* IOC3, SuperIO, Bridge, SCSI */ -#define KLTYPE_IO6 KLTYPE_BASEIO /* Additional name */ +#define KLTYPE_IO6 KLTYPE_BASEIO /* Additional name */ #define KLTYPE_4CHSCSI (KLCLASS_IO | 0x2) -#define KLTYPE_MSCSI KLTYPE_4CHSCSI /* Additional name */ -#define KLTYPE_ETHERNET (KLCLASS_IO | 0x3) -#define KLTYPE_MENET KLTYPE_ETHERNET /* Additional name */ -#define KLTYPE_FDDI (KLCLASS_IO | 0x4) +#define KLTYPE_MSCSI KLTYPE_4CHSCSI /* Additional name */ +#define KLTYPE_ETHERNET (KLCLASS_IO | 0x3) +#define KLTYPE_MENET KLTYPE_ETHERNET /* Additional name */ +#define KLTYPE_FDDI (KLCLASS_IO | 0x4) #define KLTYPE_UNUSED (KLCLASS_IO | 0x5) /* XXX UNUSED */ -#define KLTYPE_HAROLD (KLCLASS_IO | 0x6) /* PCI SHOE BOX */ +#define KLTYPE_HAROLD (KLCLASS_IO | 0x6) /* PCI SHOE BOX */ #define KLTYPE_PCI KLTYPE_HAROLD -#define KLTYPE_VME (KLCLASS_IO | 0x7) /* Any 3rd party VME card */ -#define KLTYPE_MIO (KLCLASS_IO | 0x8) -#define KLTYPE_FC (KLCLASS_IO | 0x9) -#define KLTYPE_LINC (KLCLASS_IO | 0xA) -#define KLTYPE_TPU (KLCLASS_IO | 0xB) /* Tensor Processing Unit */ -#define KLTYPE_GSN_A (KLCLASS_IO | 0xC) /* Main GSN board */ -#define KLTYPE_GSN_B (KLCLASS_IO | 0xD) /* Auxiliary GSN board */ +#define KLTYPE_VME (KLCLASS_IO | 0x7) /* Any 3rd party VME card */ +#define KLTYPE_MIO (KLCLASS_IO | 0x8) +#define KLTYPE_FC (KLCLASS_IO | 0x9) +#define KLTYPE_LINC (KLCLASS_IO | 0xA) +#define KLTYPE_TPU (KLCLASS_IO | 0xB) /* Tensor Processing Unit */ +#define KLTYPE_GSN_A (KLCLASS_IO | 0xC) /* Main GSN board */ +#define KLTYPE_GSN_B (KLCLASS_IO | 0xD) /* Auxiliary GSN board */ #define KLTYPE_GFX (KLCLASS_GFX | 0x0) /* unknown graphics type */ #define KLTYPE_GFX_KONA (KLCLASS_GFX | 0x1) /* KONA graphics on IP27 */ #define KLTYPE_GFX_MGRA (KLCLASS_GFX | 0x3) /* MGRAS graphics on IP27 */ #define KLTYPE_WEIRDROUTER (KLCLASS_ROUTER | 0x0) -#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1) -#define KLTYPE_ROUTER2 KLTYPE_ROUTER /* Obsolete! */ +#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1) +#define KLTYPE_ROUTER2 KLTYPE_ROUTER /* Obsolete! */ #define KLTYPE_NULL_ROUTER (KLCLASS_ROUTER | 0x2) #define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3) #define KLTYPE_WEIRDMIDPLANE (KLCLASS_MIDPLANE | 0x0) #define KLTYPE_MIDPLANE8 (KLCLASS_MIDPLANE | 0x1) /* 8 slot backplane */ -#define KLTYPE_MIDPLANE KLTYPE_MIDPLANE8 +#define KLTYPE_MIDPLANE KLTYPE_MIDPLANE8 #define KLTYPE_PBRICK_XBOW (KLCLASS_MIDPLANE | 0x2) #define KLTYPE_IOBRICK (KLCLASS_IOBRICK | 0x0) @@ -398,11 +398,11 @@ typedef struct kl_config_hdr { * When bringup started nic names had not standardized and so we * had to hard code. (For people interested in history.) */ -#define KLTYPE_XTHD (KLCLASS_PSEUDO_GFX | 0x9) +#define KLTYPE_XTHD (KLCLASS_PSEUDO_GFX | 0x9) #define KLTYPE_UNKNOWN (KLCLASS_UNKNOWN | 0xf) -#define KLTYPE(_x) ((_x) & KLTYPE_MASK) +#define KLTYPE(_x) ((_x) & KLTYPE_MASK) #define IS_MIO_PRESENT(l) ((l->brd_type == KLTYPE_BASEIO) && \ (l->brd_flags & SECOND_NIC_PRESENT)) #define IS_MIO_IOC3(l, n) (IS_MIO_PRESENT(l) && (n > 2)) @@ -416,33 +416,33 @@ typedef struct kl_config_hdr { #define LOCAL_BOARD 1 #define REMOTE_BOARD 2 -#define LBOARD_STRUCT_VERSION 2 +#define LBOARD_STRUCT_VERSION 2 typedef struct lboard_s { - klconf_off_t brd_next; /* Next BOARD */ - unsigned char struct_type; /* type of structure, local or remote */ - unsigned char brd_type; /* type+class */ - unsigned char brd_sversion; /* version of this structure */ - unsigned char brd_brevision; /* board revision */ - unsigned char brd_promver; /* board prom version, if any */ - unsigned char brd_flags; /* Enabled, Disabled etc */ - unsigned char brd_slot; /* slot number */ - unsigned short brd_debugsw; /* Debug switches */ - moduleid_t brd_module; /* module to which it belongs */ - partid_t brd_partition; /* Partition number */ - unsigned short brd_diagval; /* diagnostic value */ - unsigned short brd_diagparm; /* diagnostic parameter */ - unsigned char brd_inventory; /* inventory history */ - unsigned char brd_numcompts; /* Number of components */ - nic_t brd_nic; /* Number in CAN */ - nasid_t brd_nasid; /* passed parameter */ - klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */ - klconf_off_t brd_errinfo; /* Board's error information */ + klconf_off_t brd_next; /* Next BOARD */ + unsigned char struct_type; /* type of structure, local or remote */ + unsigned char brd_type; /* type+class */ + unsigned char brd_sversion; /* version of this structure */ + unsigned char brd_brevision; /* board revision */ + unsigned char brd_promver; /* board prom version, if any */ + unsigned char brd_flags; /* Enabled, Disabled etc */ + unsigned char brd_slot; /* slot number */ + unsigned short brd_debugsw; /* Debug switches */ + moduleid_t brd_module; /* module to which it belongs */ + partid_t brd_partition; /* Partition number */ + unsigned short brd_diagval; /* diagnostic value */ + unsigned short brd_diagparm; /* diagnostic parameter */ + unsigned char brd_inventory; /* inventory history */ + unsigned char brd_numcompts; /* Number of components */ + nic_t brd_nic; /* Number in CAN */ + nasid_t brd_nasid; /* passed parameter */ + klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */ + klconf_off_t brd_errinfo; /* Board's error information */ struct lboard_s *brd_parent; /* Logical parent for this brd */ - vertex_hdl_t brd_graph_link; /* vertex hdl to connect extern compts */ + vertex_hdl_t brd_graph_link; /* vertex hdl to connect extern compts */ confidence_t brd_confidence; /* confidence that the board is bad */ - nasid_t brd_owner; /* who owns this board */ - unsigned char brd_nic_flags; /* To handle 8 more NICs */ + nasid_t brd_owner; /* who owns this board */ + unsigned char brd_nic_flags; /* To handle 8 more NICs */ char brd_name[32]; } lboard_t; @@ -456,23 +456,23 @@ typedef struct lboard_s { #define KLCF_CLASS(_brd) KLCLASS((_brd)->brd_type) #define KLCF_TYPE(_brd) KLTYPE((_brd)->brd_type) -#define KLCF_REMOTE(_brd) (((_brd)->struct_type & LOCAL_BOARD) ? 0 : 1) +#define KLCF_REMOTE(_brd) (((_brd)->struct_type & LOCAL_BOARD) ? 0 : 1) #define KLCF_NUM_COMPS(_brd) ((_brd)->brd_numcompts) #define KLCF_MODULE_ID(_brd) ((_brd)->brd_module) -#define KLCF_NEXT(_brd) \ - ((_brd)->brd_next ? \ +#define KLCF_NEXT(_brd) \ + ((_brd)->brd_next ? \ (lboard_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), (_brd)->brd_next)):\ NULL) -#define KLCF_COMP(_brd, _ndx) \ - (klinfo_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), \ +#define KLCF_COMP(_brd, _ndx) \ + (klinfo_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), \ (_brd)->brd_compts[(_ndx)])) #define KLCF_COMP_ERROR(_brd, _comp) \ - (NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo)) + (NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo)) #define KLCF_COMP_TYPE(_comp) ((_comp)->struct_type) -#define KLCF_BRIDGE_W_ID(_comp) ((_comp)->physid) /* Widget ID */ +#define KLCF_BRIDGE_W_ID(_comp) ((_comp)->physid) /* Widget ID */ @@ -481,73 +481,73 @@ typedef struct lboard_s { * component. */ -typedef struct klinfo_s { /* Generic info */ - unsigned char struct_type; /* type of this structure */ - unsigned char struct_version; /* version of this structure */ - unsigned char flags; /* Enabled, disabled etc */ - unsigned char revision; /* component revision */ - unsigned short diagval; /* result of diagnostics */ - unsigned short diagparm; /* diagnostic parameter */ - unsigned char inventory; /* previous inventory status */ - nic_t nic; /* MUst be aligned properly */ - unsigned char physid; /* physical id of component */ - unsigned int virtid; /* virtual id as seen by system */ - unsigned char widid; /* Widget id - if applicable */ - nasid_t nasid; /* node number - from parent */ +typedef struct klinfo_s { /* Generic info */ + unsigned char struct_type; /* type of this structure */ + unsigned char struct_version; /* version of this structure */ + unsigned char flags; /* Enabled, disabled etc */ + unsigned char revision; /* component revision */ + unsigned short diagval; /* result of diagnostics */ + unsigned short diagparm; /* diagnostic parameter */ + unsigned char inventory; /* previous inventory status */ + nic_t nic; /* MUst be aligned properly */ + unsigned char physid; /* physical id of component */ + unsigned int virtid; /* virtual id as seen by system */ + unsigned char widid; /* Widget id - if applicable */ + nasid_t nasid; /* node number - from parent */ char pad1; /* pad out structure. */ char pad2; /* pad out structure. */ - COMPONENT *arcs_compt; /* ptr to the arcs struct for ease*/ - klconf_off_t errinfo; /* component specific errors */ - unsigned short pad3; /* pci fields have moved over to */ - unsigned short pad4; /* klbri_t */ + COMPONENT *arcs_compt; /* ptr to the arcs struct for ease*/ + klconf_off_t errinfo; /* component specific errors */ + unsigned short pad3; /* pci fields have moved over to */ + unsigned short pad4; /* klbri_t */ } klinfo_t ; #define KLCONFIG_INFO_ENABLED(_i) ((_i)->flags & KLINFO_ENABLE) /* * Component structures. * Following are the currently identified components: - * CPU, HUB, MEM_BANK, - * XBOW(consists of 16 WIDGETs, each of which can be HUB or GRAPHICS or BRIDGE) - * BRIDGE, IOC3, SuperIO, SCSI, FDDI - * ROUTER - * GRAPHICS + * CPU, HUB, MEM_BANK, + * XBOW(consists of 16 WIDGETs, each of which can be HUB or GRAPHICS or BRIDGE) + * BRIDGE, IOC3, SuperIO, SCSI, FDDI + * ROUTER + * GRAPHICS */ #define KLSTRUCT_UNKNOWN 0 -#define KLSTRUCT_CPU 1 -#define KLSTRUCT_HUB 2 -#define KLSTRUCT_MEMBNK 3 -#define KLSTRUCT_XBOW 4 -#define KLSTRUCT_BRI 5 -#define KLSTRUCT_IOC3 6 -#define KLSTRUCT_PCI 7 -#define KLSTRUCT_VME 8 +#define KLSTRUCT_CPU 1 +#define KLSTRUCT_HUB 2 +#define KLSTRUCT_MEMBNK 3 +#define KLSTRUCT_XBOW 4 +#define KLSTRUCT_BRI 5 +#define KLSTRUCT_IOC3 6 +#define KLSTRUCT_PCI 7 +#define KLSTRUCT_VME 8 #define KLSTRUCT_ROU 9 -#define KLSTRUCT_GFX 10 -#define KLSTRUCT_SCSI 11 -#define KLSTRUCT_FDDI 12 -#define KLSTRUCT_MIO 13 -#define KLSTRUCT_DISK 14 -#define KLSTRUCT_TAPE 15 -#define KLSTRUCT_CDROM 16 -#define KLSTRUCT_HUB_UART 17 -#define KLSTRUCT_IOC3ENET 18 -#define KLSTRUCT_IOC3UART 19 +#define KLSTRUCT_GFX 10 +#define KLSTRUCT_SCSI 11 +#define KLSTRUCT_FDDI 12 +#define KLSTRUCT_MIO 13 +#define KLSTRUCT_DISK 14 +#define KLSTRUCT_TAPE 15 +#define KLSTRUCT_CDROM 16 +#define KLSTRUCT_HUB_UART 17 +#define KLSTRUCT_IOC3ENET 18 +#define KLSTRUCT_IOC3UART 19 #define KLSTRUCT_UNUSED 20 /* XXX UNUSED */ -#define KLSTRUCT_IOC3PCKM 21 -#define KLSTRUCT_RAD 22 -#define KLSTRUCT_HUB_TTY 23 -#define KLSTRUCT_IOC3_TTY 24 +#define KLSTRUCT_IOC3PCKM 21 +#define KLSTRUCT_RAD 22 +#define KLSTRUCT_HUB_TTY 23 +#define KLSTRUCT_IOC3_TTY 24 /* Early Access IO proms are compatible only with KLSTRUCT values up to 24. */ -#define KLSTRUCT_FIBERCHANNEL 25 +#define KLSTRUCT_FIBERCHANNEL 25 #define KLSTRUCT_MOD_SERIAL_NUM 26 -#define KLSTRUCT_IOC3MS 27 -#define KLSTRUCT_TPU 28 -#define KLSTRUCT_GSN_A 29 -#define KLSTRUCT_GSN_B 30 -#define KLSTRUCT_XTHD 31 +#define KLSTRUCT_IOC3MS 27 +#define KLSTRUCT_TPU 28 +#define KLSTRUCT_GSN_A 29 +#define KLSTRUCT_GSN_B 30 +#define KLSTRUCT_XTHD 31 /* * These are the indices of various components within a lboard structure. @@ -583,7 +583,7 @@ typedef u64 *router_t; * The port info in ip27_cfg area translates to a lboart_t in the * KLCONFIG area. But since KLCONFIG does not use pointers, lboart_t * is stored in terms of a nasid and a offset from start of KLCONFIG - * area on that nasid. + * area on that nasid. */ typedef struct klport_s { nasid_t port_nasid; @@ -591,20 +591,20 @@ typedef struct klport_s { klconf_off_t port_offset; } klport_t; -typedef struct klcpu_s { /* CPU */ - klinfo_t cpu_info; - unsigned short cpu_prid; /* Processor PRID value */ - unsigned short cpu_fpirr; /* FPU IRR value */ - unsigned short cpu_speed; /* Speed in MHZ */ - unsigned short cpu_scachesz; /* secondary cache size in MB */ - unsigned short cpu_scachespeed;/* secondary cache speed in MHz */ +typedef struct klcpu_s { /* CPU */ + klinfo_t cpu_info; + unsigned short cpu_prid; /* Processor PRID value */ + unsigned short cpu_fpirr; /* FPU IRR value */ + unsigned short cpu_speed; /* Speed in MHZ */ + unsigned short cpu_scachesz; /* secondary cache size in MB */ + unsigned short cpu_scachespeed;/* secondary cache speed in MHz */ } klcpu_t ; #define CPU_STRUCT_VERSION 2 typedef struct klhub_s { /* HUB */ - klinfo_t hub_info; - unsigned int hub_flags; /* PCFG_HUB_xxx flags */ + klinfo_t hub_info; + unsigned int hub_flags; /* PCFG_HUB_xxx flags */ klport_t hub_port; /* hub is connected to this */ nic_t hub_box_nic; /* nic of containing box */ klconf_off_t hub_mfg_nic; /* MFG NIC string */ @@ -612,36 +612,36 @@ typedef struct klhub_s { /* HUB */ } klhub_t ; typedef struct klhub_uart_s { /* HUB */ - klinfo_t hubuart_info; - unsigned int hubuart_flags; /* PCFG_HUB_xxx flags */ + klinfo_t hubuart_info; + unsigned int hubuart_flags; /* PCFG_HUB_xxx flags */ nic_t hubuart_box_nic; /* nic of containing box */ } klhub_uart_t ; -#define MEMORY_STRUCT_VERSION 2 +#define MEMORY_STRUCT_VERSION 2 typedef struct klmembnk_s { /* MEMORY BANK */ - klinfo_t membnk_info; - short membnk_memsz; /* Total memory in megabytes */ + klinfo_t membnk_info; + short membnk_memsz; /* Total memory in megabytes */ short membnk_dimm_select; /* bank to physical addr mapping*/ short membnk_bnksz[MD_MEM_BANKS]; /* Memory bank sizes */ short membnk_attr; } klmembnk_t ; #define KLCONFIG_MEMBNK_SIZE(_info, _bank) \ - ((_info)->membnk_bnksz[(_bank)]) + ((_info)->membnk_bnksz[(_bank)]) #define MEMBNK_PREMIUM 1 #define KLCONFIG_MEMBNK_PREMIUM(_info, _bank) \ - ((_info)->membnk_attr & (MEMBNK_PREMIUM << (_bank))) + ((_info)->membnk_attr & (MEMBNK_PREMIUM << (_bank))) #define MAX_SERIAL_NUM_SIZE 10 typedef struct klmod_serial_num_s { - klinfo_t snum_info; + klinfo_t snum_info; union { - char snum_str[MAX_SERIAL_NUM_SIZE]; - unsigned long long snum_int; + char snum_str[MAX_SERIAL_NUM_SIZE]; + unsigned long long snum_int; } snum; } klmod_serial_num_t; @@ -650,43 +650,43 @@ typedef struct klmod_serial_num_s { serial number struct as a component without losing compatibility between prom versions. */ -#define GET_SNUM_COMP(_l) ((klmod_serial_num_t *)\ +#define GET_SNUM_COMP(_l) ((klmod_serial_num_t *)\ KLCF_COMP(_l, _l->brd_numcompts)) #define MAX_XBOW_LINKS 16 -typedef struct klxbow_s { /* XBOW */ - klinfo_t xbow_info ; +typedef struct klxbow_s { /* XBOW */ + klinfo_t xbow_info ; klport_t xbow_port_info[MAX_XBOW_LINKS] ; /* Module number */ - int xbow_master_hub_link; - /* type of brd connected+component struct ptr+flags */ + int xbow_master_hub_link; + /* type of brd connected+component struct ptr+flags */ } klxbow_t ; #define MAX_PCI_SLOTS 8 typedef struct klpci_device_s { s32 pci_device_id; /* 32 bits of vendor/device ID. */ - s32 pci_device_pad; /* 32 bits of padding. */ + s32 pci_device_pad; /* 32 bits of padding. */ } klpci_device_t; #define BRIDGE_STRUCT_VERSION 2 -typedef struct klbri_s { /* BRIDGE */ - klinfo_t bri_info ; - unsigned char bri_eprominfo ; /* IO6prom connected to bridge */ - unsigned char bri_bustype ; /* PCI/VME BUS bridge/GIO */ - pci_t pci_specific ; /* PCI Board config info */ +typedef struct klbri_s { /* BRIDGE */ + klinfo_t bri_info ; + unsigned char bri_eprominfo ; /* IO6prom connected to bridge */ + unsigned char bri_bustype ; /* PCI/VME BUS bridge/GIO */ + pci_t pci_specific ; /* PCI Board config info */ klpci_device_t bri_devices[MAX_PCI_DEVS] ; /* PCI IDs */ klconf_off_t bri_mfg_nic ; } klbri_t ; #define MAX_IOC3_TTY 2 -typedef struct klioc3_s { /* IOC3 */ - klinfo_t ioc3_info ; - unsigned char ioc3_ssram ; /* Info about ssram */ - unsigned char ioc3_nvram ; /* Info about nvram */ - klinfo_t ioc3_superio ; /* Info about superio */ +typedef struct klioc3_s { /* IOC3 */ + klinfo_t ioc3_info ; + unsigned char ioc3_ssram ; /* Info about ssram */ + unsigned char ioc3_nvram ; /* Info about nvram */ + klinfo_t ioc3_superio ; /* Info about superio */ klconf_off_t ioc3_tty_off ; klinfo_t ioc3_enet ; klconf_off_t ioc3_enet_off ; @@ -695,27 +695,27 @@ typedef struct klioc3_s { /* IOC3 */ #define MAX_VME_SLOTS 8 -typedef struct klvmeb_s { /* VME BRIDGE - PCI CTLR */ - klinfo_t vmeb_info ; +typedef struct klvmeb_s { /* VME BRIDGE - PCI CTLR */ + klinfo_t vmeb_info ; vmeb_t vmeb_specific ; - klconf_off_t vmeb_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ + klconf_off_t vmeb_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ } klvmeb_t ; -typedef struct klvmed_s { /* VME DEVICE - VME BOARD */ +typedef struct klvmed_s { /* VME DEVICE - VME BOARD */ klinfo_t vmed_info ; vmed_t vmed_specific ; - klconf_off_t vmed_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ + klconf_off_t vmed_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ } klvmed_t ; #define ROUTER_VECTOR_VERS 2 /* XXX - Don't we need the number of ports here?!? */ -typedef struct klrou_s { /* ROUTER */ - klinfo_t rou_info ; - unsigned int rou_flags ; /* PCFG_ROUTER_xxx flags */ - nic_t rou_box_nic ; /* nic of the containing module */ - klport_t rou_port[MAX_ROUTER_PORTS + 1] ; /* array index 1 to 6 */ - klconf_off_t rou_mfg_nic ; /* MFG NIC string */ +typedef struct klrou_s { /* ROUTER */ + klinfo_t rou_info ; + unsigned int rou_flags ; /* PCFG_ROUTER_xxx flags */ + nic_t rou_box_nic ; /* nic of the containing module */ + klport_t rou_port[MAX_ROUTER_PORTS + 1] ; /* array index 1 to 6 */ + klconf_off_t rou_mfg_nic ; /* MFG NIC string */ u64 rou_vector; /* vector from master node */ } klrou_t ; @@ -732,30 +732,30 @@ typedef struct klrou_s { /* ROUTER */ #define KLGFX_COOKIE 0x0c0de000 typedef struct klgfx_s { /* GRAPHICS Device */ - klinfo_t gfx_info; - klconf_off_t old_gndevs; /* for compatibility with older proms */ - klconf_off_t old_gdoff0; /* for compatibility with older proms */ + klinfo_t gfx_info; + klconf_off_t old_gndevs; /* for compatibility with older proms */ + klconf_off_t old_gdoff0; /* for compatibility with older proms */ unsigned int cookie; /* for compatibility with older proms */ unsigned int moduleslot; struct klgfx_s *gfx_next_pipe; graphics_t gfx_specific; - klconf_off_t pad0; /* for compatibility with older proms */ - klconf_off_t gfx_mfg_nic; + klconf_off_t pad0; /* for compatibility with older proms */ + klconf_off_t gfx_mfg_nic; } klgfx_t; typedef struct klxthd_s { - klinfo_t xthd_info ; - klconf_off_t xthd_mfg_nic ; /* MFG NIC string */ + klinfo_t xthd_info ; + klconf_off_t xthd_mfg_nic ; /* MFG NIC string */ } klxthd_t ; -typedef struct kltpu_s { /* TPU board */ - klinfo_t tpu_info ; - klconf_off_t tpu_mfg_nic ; /* MFG NIC string */ +typedef struct kltpu_s { /* TPU board */ + klinfo_t tpu_info ; + klconf_off_t tpu_mfg_nic ; /* MFG NIC string */ } kltpu_t ; -typedef struct klgsn_s { /* GSN board */ - klinfo_t gsn_info ; - klconf_off_t gsn_mfg_nic ; /* MFG NIC string */ +typedef struct klgsn_s { /* GSN board */ + klinfo_t gsn_info ; + klconf_off_t gsn_mfg_nic ; /* MFG NIC string */ } klgsn_t ; #define MAX_SCSI_DEVS 16 @@ -767,57 +767,57 @@ typedef struct klgsn_s { /* GSN board */ * that as the size to be klmalloced. */ -typedef struct klscsi_s { /* SCSI Controller */ - klinfo_t scsi_info ; - scsi_t scsi_specific ; - unsigned char scsi_numdevs ; +typedef struct klscsi_s { /* SCSI Controller */ + klinfo_t scsi_info ; + scsi_t scsi_specific ; + unsigned char scsi_numdevs ; klconf_off_t scsi_devinfo[MAX_SCSI_DEVS] ; } klscsi_t ; -typedef struct klscdev_s { /* SCSI device */ - klinfo_t scdev_info ; +typedef struct klscdev_s { /* SCSI device */ + klinfo_t scdev_info ; struct scsidisk_data *scdev_cfg ; /* driver fills up this */ } klscdev_t ; -typedef struct klttydev_s { /* TTY device */ - klinfo_t ttydev_info ; +typedef struct klttydev_s { /* TTY device */ + klinfo_t ttydev_info ; struct terminal_data *ttydev_cfg ; /* driver fills up this */ } klttydev_t ; -typedef struct klenetdev_s { /* ENET device */ - klinfo_t enetdev_info ; +typedef struct klenetdev_s { /* ENET device */ + klinfo_t enetdev_info ; struct net_data *enetdev_cfg ; /* driver fills up this */ } klenetdev_t ; -typedef struct klkbddev_s { /* KBD device */ - klinfo_t kbddev_info ; +typedef struct klkbddev_s { /* KBD device */ + klinfo_t kbddev_info ; struct keyboard_data *kbddev_cfg ; /* driver fills up this */ } klkbddev_t ; -typedef struct klmsdev_s { /* mouse device */ - klinfo_t msdev_info ; - void *msdev_cfg ; +typedef struct klmsdev_s { /* mouse device */ + klinfo_t msdev_info ; + void *msdev_cfg ; } klmsdev_t ; #define MAX_FDDI_DEVS 10 /* XXX Is this true */ -typedef struct klfddi_s { /* FDDI */ - klinfo_t fddi_info ; - fddi_t fddi_specific ; +typedef struct klfddi_s { /* FDDI */ + klinfo_t fddi_info ; + fddi_t fddi_specific ; klconf_off_t fddi_devinfo[MAX_FDDI_DEVS] ; } klfddi_t ; -typedef struct klmio_s { /* MIO */ - klinfo_t mio_info ; - mio_t mio_specific ; +typedef struct klmio_s { /* MIO */ + klinfo_t mio_info ; + mio_t mio_specific ; } klmio_t ; typedef union klcomp_s { klcpu_t kc_cpu; klhub_t kc_hub; - klmembnk_t kc_mem; - klxbow_t kc_xbow; + klmembnk_t kc_mem; + klxbow_t kc_xbow; klbri_t kc_bri; klioc3_t kc_ioc3; klvmeb_t kc_vmeb; @@ -831,11 +831,11 @@ typedef union klcomp_s { klmod_serial_num_t kc_snum ; } klcomp_t; -typedef union kldev_s { /* for device structure allocation */ +typedef union kldev_s { /* for device structure allocation */ klscdev_t kc_scsi_dev ; klttydev_t kc_tty_dev ; klenetdev_t kc_enet_dev ; - klkbddev_t kc_kbd_dev ; + klkbddev_t kc_kbd_dev ; } kldev_t ; /* Data structure interface routines. TBD */ diff --git a/arch/mips/include/asm/sn/kldir.h b/arch/mips/include/asm/sn/kldir.h index 1327e12e9645..bfb3aec94539 100644 --- a/arch/mips/include/asm/sn/kldir.h +++ b/arch/mips/include/asm/sn/kldir.h @@ -16,8 +16,8 @@ * The kldir memory area resides at a fixed place in each node's memory and * provides pointers to most other IP27 memory areas. This allows us to * resize and/or relocate memory areas at a later time without breaking all - * firmware and kernels that use them. Indices in the array are - * permanently dedicated to areas listed below. Some memory areas (marked + * firmware and kernels that use them. Indices in the array are + * permanently dedicated to areas listed below. Some memory areas (marked * below) reside at a permanently fixed location, but are included in the * directory for completeness. */ @@ -28,98 +28,98 @@ * The upper portion of the memory map applies during boot * only and is overwritten by IRIX/SYMMON. * - * MEMORY MAP PER NODE + * MEMORY MAP PER NODE * - * 0x2000000 (32M) +-----------------------------------------+ - * | IO6 BUFFERS FOR FLASH ENET IOC3 | - * 0x1F80000 (31.5M) +-----------------------------------------+ - * | IO6 TEXT/DATA/BSS/stack | - * 0x1C00000 (30M) +-----------------------------------------+ - * | IO6 PROM DEBUG TEXT/DATA/BSS/stack | - * 0x0800000 (28M) +-----------------------------------------+ - * | IP27 PROM TEXT/DATA/BSS/stack | - * 0x1B00000 (27M) +-----------------------------------------+ - * | IP27 CFG | - * 0x1A00000 (26M) +-----------------------------------------+ - * | Graphics PROM | - * 0x1800000 (24M) +-----------------------------------------+ - * | 3rd Party PROM drivers | - * 0x1600000 (22M) +-----------------------------------------+ - * | | - * | Free | - * | | - * +-----------------------------------------+ - * | UNIX DEBUG Version | - * 0x190000 (2M--) +-----------------------------------------+ - * | SYMMON | - * | (For UNIX Debug only) | - * 0x34000 (208K) +-----------------------------------------+ - * | SYMMON STACK [NUM_CPU_PER_NODE] | - * | (For UNIX Debug only) | - * 0x25000 (148K) +-----------------------------------------+ - * | KLCONFIG - II (temp) | - * | | - * | ---------------------------- | - * | | - * | UNIX NON-DEBUG Version | - * 0x19000 (100K) +-----------------------------------------+ + * 0x2000000 (32M) +-----------------------------------------+ + * | IO6 BUFFERS FOR FLASH ENET IOC3 | + * 0x1F80000 (31.5M) +-----------------------------------------+ + * | IO6 TEXT/DATA/BSS/stack | + * 0x1C00000 (30M) +-----------------------------------------+ + * | IO6 PROM DEBUG TEXT/DATA/BSS/stack | + * 0x0800000 (28M) +-----------------------------------------+ + * | IP27 PROM TEXT/DATA/BSS/stack | + * 0x1B00000 (27M) +-----------------------------------------+ + * | IP27 CFG | + * 0x1A00000 (26M) +-----------------------------------------+ + * | Graphics PROM | + * 0x1800000 (24M) +-----------------------------------------+ + * | 3rd Party PROM drivers | + * 0x1600000 (22M) +-----------------------------------------+ + * | | + * | Free | + * | | + * +-----------------------------------------+ + * | UNIX DEBUG Version | + * 0x190000 (2M--) +-----------------------------------------+ + * | SYMMON | + * | (For UNIX Debug only) | + * 0x34000 (208K) +-----------------------------------------+ + * | SYMMON STACK [NUM_CPU_PER_NODE] | + * | (For UNIX Debug only) | + * 0x25000 (148K) +-----------------------------------------+ + * | KLCONFIG - II (temp) | + * | | + * | ---------------------------- | + * | | + * | UNIX NON-DEBUG Version | + * 0x19000 (100K) +-----------------------------------------+ * * * The lower portion of the memory map contains information that is * permanent and is used by the IP27PROM, IO6PROM and IRIX. * - * 0x19000 (100K) +-----------------------------------------+ - * | | - * | PI Error Spools (32K) | - * | | - * 0x12000 (72K) +-----------------------------------------+ - * | Unused | - * 0x11c00 (71K) +-----------------------------------------+ - * | CPU 1 NMI Eframe area | - * 0x11a00 (70.5K) +-----------------------------------------+ - * | CPU 0 NMI Eframe area | - * 0x11800 (70K) +-----------------------------------------+ - * | CPU 1 NMI Register save area | - * 0x11600 (69.5K) +-----------------------------------------+ - * | CPU 0 NMI Register save area | - * 0x11400 (69K) +-----------------------------------------+ - * | GDA (1k) | - * 0x11000 (68K) +-----------------------------------------+ - * | Early cache Exception stack | - * | and/or | - * | kernel/io6prom nmi registers | + * 0x19000 (100K) +-----------------------------------------+ + * | | + * | PI Error Spools (32K) | + * | | + * 0x12000 (72K) +-----------------------------------------+ + * | Unused | + * 0x11c00 (71K) +-----------------------------------------+ + * | CPU 1 NMI Eframe area | + * 0x11a00 (70.5K) +-----------------------------------------+ + * | CPU 0 NMI Eframe area | + * 0x11800 (70K) +-----------------------------------------+ + * | CPU 1 NMI Register save area | + * 0x11600 (69.5K) +-----------------------------------------+ + * | CPU 0 NMI Register save area | + * 0x11400 (69K) +-----------------------------------------+ + * | GDA (1k) | + * 0x11000 (68K) +-----------------------------------------+ + * | Early cache Exception stack | + * | and/or | + * | kernel/io6prom nmi registers | * 0x10800 (66k) +-----------------------------------------+ - * | cache error eframe | - * 0x10400 (65K) +-----------------------------------------+ - * | Exception Handlers (UALIAS copy) | - * 0x10000 (64K) +-----------------------------------------+ - * | | - * | | - * | KLCONFIG - I (permanent) (48K) | - * | | - * | | - * | | - * 0x4000 (16K) +-----------------------------------------+ - * | NMI Handler (Protected Page) | - * 0x3000 (12K) +-----------------------------------------+ - * | ARCS PVECTORS (master node only) | - * 0x2c00 (11K) +-----------------------------------------+ - * | ARCS TVECTORS (master node only) | - * 0x2800 (10K) +-----------------------------------------+ - * | LAUNCH [NUM_CPU] | - * 0x2400 (9K) +-----------------------------------------+ - * | Low memory directory (KLDIR) | - * 0x2000 (8K) +-----------------------------------------+ - * | ARCS SPB (1K) | - * 0x1000 (4K) +-----------------------------------------+ - * | Early cache Exception stack | - * | and/or | - * | kernel/io6prom nmi registers | - * 0x800 (2k) +-----------------------------------------+ - * | cache error eframe | - * 0x400 (1K) +-----------------------------------------+ - * | Exception Handlers | - * 0x0 (0K) +-----------------------------------------+ + * | cache error eframe | + * 0x10400 (65K) +-----------------------------------------+ + * | Exception Handlers (UALIAS copy) | + * 0x10000 (64K) +-----------------------------------------+ + * | | + * | | + * | KLCONFIG - I (permanent) (48K) | + * | | + * | | + * | | + * 0x4000 (16K) +-----------------------------------------+ + * | NMI Handler (Protected Page) | + * 0x3000 (12K) +-----------------------------------------+ + * | ARCS PVECTORS (master node only) | + * 0x2c00 (11K) +-----------------------------------------+ + * | ARCS TVECTORS (master node only) | + * 0x2800 (10K) +-----------------------------------------+ + * | LAUNCH [NUM_CPU] | + * 0x2400 (9K) +-----------------------------------------+ + * | Low memory directory (KLDIR) | + * 0x2000 (8K) +-----------------------------------------+ + * | ARCS SPB (1K) | + * 0x1000 (4K) +-----------------------------------------+ + * | Early cache Exception stack | + * | and/or | + * | kernel/io6prom nmi registers | + * 0x800 (2k) +-----------------------------------------+ + * | cache error eframe | + * 0x400 (1K) +-----------------------------------------+ + * | Exception Handlers | + * 0x0 (0K) +-----------------------------------------+ */ #ifdef __ASSEMBLY__ @@ -202,13 +202,13 @@ #ifndef __ASSEMBLY__ typedef struct kldir_ent_s { - u64 magic; /* Indicates validity of entry */ + u64 magic; /* Indicates validity of entry */ off_t offset; /* Offset from start of node space */ unsigned long pointer; /* Pointer to area in some cases */ - size_t size; /* Size in bytes */ + size_t size; /* Size in bytes */ u64 count; /* Repeat count if array, 1 if not */ - size_t stride; /* Stride if array, 0 if not */ - char rsvd[16]; /* Pad entry to 0x40 bytes */ + size_t stride; /* Stride if array, 0 if not */ + char rsvd[16]; /* Pad entry to 0x40 bytes */ /* NOTE: These 16 bytes are used in the Partition KLDIR entry to store partition info. Refer to klpart.h for this. */ } kldir_ent_t; diff --git a/arch/mips/include/asm/sn/launch.h b/arch/mips/include/asm/sn/launch.h index b7c2226312c6..04226d8d30c4 100644 --- a/arch/mips/include/asm/sn/launch.h +++ b/arch/mips/include/asm/sn/launch.h @@ -19,7 +19,7 @@ * * The master stores launch parameters in the launch structure * corresponding to a target processor that is in a slave loop, then sends - * an interrupt to the slave processor. The slave calls the desired + * an interrupt to the slave processor. The slave calls the desired * function, then returns to the slave loop. The master may poll or wait * for the slaves to finish. * @@ -33,7 +33,7 @@ #define LAUNCH_PADSZ 0xa0 #endif -#define LAUNCH_OFF_MAGIC 0x00 /* Struct offsets for assembly */ +#define LAUNCH_OFF_MAGIC 0x00 /* Struct offsets for assembly */ #define LAUNCH_OFF_BUSY 0x08 #define LAUNCH_OFF_CALL 0x10 #define LAUNCH_OFF_CALLC 0x18 @@ -44,7 +44,7 @@ #define LAUNCH_OFF_BEVNORMAL 0x40 #define LAUNCH_OFF_BEVECC 0x48 -#define LAUNCH_STATE_DONE 0 /* Return value of LAUNCH_POLL */ +#define LAUNCH_STATE_DONE 0 /* Return value of LAUNCH_POLL */ #define LAUNCH_STATE_SENT 1 #define LAUNCH_STATE_RECD 2 @@ -65,16 +65,16 @@ typedef int launch_state_t; typedef void (*launch_proc_t)(u64 call_parm); typedef struct launch_s { - volatile u64 magic; /* Magic number */ - volatile u64 busy; /* Slave currently active */ + volatile u64 magic; /* Magic number */ + volatile u64 busy; /* Slave currently active */ volatile launch_proc_t call_addr; /* Func. for slave to call */ volatile u64 call_addr_c; /* 1's complement of call_addr*/ volatile u64 call_parm; /* Single parm passed to call*/ volatile void *stack_addr; /* Stack pointer for slave function */ volatile void *gp_addr; /* Global pointer for slave func. */ - volatile char *bevutlb;/* Address of bev utlb ex handler */ - volatile char *bevnormal;/*Address of bev normal ex handler */ - volatile char *bevecc;/* Address of bev cache err handler */ + volatile char *bevutlb;/* Address of bev utlb ex handler */ + volatile char *bevnormal;/*Address of bev normal ex handler */ + volatile char *bevecc;/* Address of bev cache err handler */ volatile char pad[160]; /* Pad to LAUNCH_SIZEOF */ } launch_t; diff --git a/arch/mips/include/asm/sn/mapped_kernel.h b/arch/mips/include/asm/sn/mapped_kernel.h index 721496a0bb92..401f3b0eee17 100644 --- a/arch/mips/include/asm/sn/mapped_kernel.h +++ b/arch/mips/include/asm/sn/mapped_kernel.h @@ -48,7 +48,7 @@ #endif /* CONFIG_MAPPED_KERNEL */ -#define MAPPED_KERN_RO_TO_K0(x) PHYS_TO_K0(MAPPED_KERN_RO_TO_PHYS(x)) -#define MAPPED_KERN_RW_TO_K0(x) PHYS_TO_K0(MAPPED_KERN_RW_TO_PHYS(x)) +#define MAPPED_KERN_RO_TO_K0(x) PHYS_TO_K0(MAPPED_KERN_RO_TO_PHYS(x)) +#define MAPPED_KERN_RW_TO_K0(x) PHYS_TO_K0(MAPPED_KERN_RW_TO_PHYS(x)) #endif /* __ASM_SN_MAPPED_KERNEL_H */ diff --git a/arch/mips/include/asm/sn/nmi.h b/arch/mips/include/asm/sn/nmi.h index 1af49897d4e1..12ac210f12a1 100644 --- a/arch/mips/include/asm/sn/nmi.h +++ b/arch/mips/include/asm/sn/nmi.h @@ -19,7 +19,7 @@ * * The master stores launch parameters in the launch structure * corresponding to a target processor that is in a slave loop, then sends - * an interrupt to the slave processor. The slave calls the desired + * an interrupt to the slave processor. The slave calls the desired * function, followed by an optional rendezvous function, then returns to * the slave loop. The master does not wait for the slaves before * returning. @@ -31,7 +31,7 @@ #define NMI_MAGIC 0x48414d4d455201 #define NMI_SIZEOF 0x40 -#define NMI_OFF_MAGIC 0x00 /* Struct offsets for assembly */ +#define NMI_OFF_MAGIC 0x00 /* Struct offsets for assembly */ #define NMI_OFF_FLAGS 0x08 #define NMI_OFF_CALL 0x10 #define NMI_OFF_CALLC 0x18 @@ -53,8 +53,8 @@ typedef struct nmi_s { volatile unsigned long magic; /* Magic number */ volatile unsigned long flags; /* Combination of flags above */ - volatile void *call_addr; /* Routine for slave to call */ - volatile void *call_addr_c; /* 1's complement of address */ + volatile void *call_addr; /* Routine for slave to call */ + volatile void *call_addr_c; /* 1's complement of address */ volatile void *call_parm; /* Single parm passed to call */ volatile unsigned long gmaster; /* Flag true only on global master*/ } nmi_t; diff --git a/arch/mips/include/asm/sn/sn0/addrs.h b/arch/mips/include/asm/sn/sn0/addrs.h index b06190093bbc..6b53070f400f 100644 --- a/arch/mips/include/asm/sn/sn0/addrs.h +++ b/arch/mips/include/asm/sn/sn0/addrs.h @@ -29,7 +29,7 @@ * chapter of the Hub specification. * * NOTE: This header file is included both by C and by assembler source - * files. Please bracket any language-dependent definitions + * files. Please bracket any language-dependent definitions * appropriately. */ @@ -102,14 +102,14 @@ #define BWIN_INDEX_BITS 3 #define BWIN_SIZE (UINT64_CAST 1 << BWIN_SIZE_BITS) -#define BWIN_SIZEMASK (BWIN_SIZE - 1) -#define BWIN_WIDGET_MASK 0x7 +#define BWIN_SIZEMASK (BWIN_SIZE - 1) +#define BWIN_WIDGET_MASK 0x7 #define NODE_BWIN_BASE0(nasid) (NODE_IO_BASE(nasid) + BWIN_SIZE) -#define NODE_BWIN_BASE(nasid, bigwin) (NODE_BWIN_BASE0(nasid) + \ +#define NODE_BWIN_BASE(nasid, bigwin) (NODE_BWIN_BASE0(nasid) + \ (UINT64_CAST(bigwin) << BWIN_SIZE_BITS)) -#define BWIN_WIDGETADDR(addr) ((addr) & BWIN_SIZEMASK) -#define BWIN_WINDOWNUM(addr) (((addr) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK) +#define BWIN_WIDGETADDR(addr) ((addr) & BWIN_SIZEMASK) +#define BWIN_WINDOWNUM(addr) (((addr) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK) /* * Verify if addr belongs to large window address of node with "nasid" * @@ -120,7 +120,7 @@ * */ -#define NODE_BWIN_ADDR(nasid, addr) \ +#define NODE_BWIN_ADDR(nasid, addr) \ (((addr) >= NODE_BWIN_BASE0(nasid)) && \ ((addr) < (NODE_BWIN_BASE(nasid, HUB_NUM_BIG_WINDOW) + \ BWIN_SIZE))) @@ -129,7 +129,7 @@ * The following define the major position-independent aliases used * in SN0. * CALIAS -- Varies in size, points to the first n bytes of memory - * on the reader's node. + * on the reader's node. */ #define CALIAS_BASE CAC_BASE @@ -146,7 +146,7 @@ #ifndef __ASSEMBLY__ #define KERN_NMI_ADDR(nasid, slice) \ - TO_NODE_UNCAC((nasid), IP27_NMI_KREGS_OFFSET + \ + TO_NODE_UNCAC((nasid), IP27_NMI_KREGS_OFFSET + \ (IP27_NMI_KREGS_CPU_SIZE * (slice))) #endif /* !__ASSEMBLY__ */ @@ -203,7 +203,7 @@ #define IO6PROM_BASE PHYS_TO_K0(0x01c00000) #define IO6PROM_SIZE 0x400000 -#define IO6PROM_BASE_MAPPED (UNCAC_BASE | 0x11c00000) +#define IO6PROM_BASE_MAPPED (UNCAC_BASE | 0x11c00000) #define IO6DPROM_BASE PHYS_TO_K0(0x01c00000) #define IO6DPROM_SIZE 0x200000 diff --git a/arch/mips/include/asm/sn/sn0/arch.h b/arch/mips/include/asm/sn/sn0/arch.h index f734f2007f24..425a67e6a947 100644 --- a/arch/mips/include/asm/sn/sn0/arch.h +++ b/arch/mips/include/asm/sn/sn0/arch.h @@ -12,23 +12,23 @@ #define _ASM_SN_SN0_ARCH_H -#ifndef SN0XXL /* 128 cpu SMP max */ +#ifndef SN0XXL /* 128 cpu SMP max */ /* * This is the maximum number of nodes that can be part of a kernel. * Effectively, it's the maximum number of compact node ids (cnodeid_t). */ -#define MAX_COMPACT_NODES 64 +#define MAX_COMPACT_NODES 64 /* * MAXCPUS refers to the maximum number of CPUs in a single kernel. * This is not necessarily the same as MAXNODES * CPUS_PER_NODE */ -#define MAXCPUS 128 +#define MAXCPUS 128 #else /* SN0XXL system */ -#define MAX_COMPACT_NODES 128 -#define MAXCPUS 256 +#define MAX_COMPACT_NODES 128 +#define MAXCPUS 256 #endif /* SN0XXL */ @@ -41,9 +41,9 @@ /* * MAX_REGIONS refers to the maximum number of hardware partitioned regions. */ -#define MAX_REGIONS 64 -#define MAX_NONPREMIUM_REGIONS 16 -#define MAX_PREMIUM_REGIONS MAX_REGIONS +#define MAX_REGIONS 64 +#define MAX_NONPREMIUM_REGIONS 16 +#define MAX_PREMIUM_REGIONS MAX_REGIONS /* * MAX_PARITIONS refers to the maximum number of logically defined @@ -57,12 +57,12 @@ * Slot constants for SN0 */ #ifdef CONFIG_SGI_SN_N_MODE -#define MAX_MEM_SLOTS 16 /* max slots per node */ +#define MAX_MEM_SLOTS 16 /* max slots per node */ #else /* !CONFIG_SGI_SN_N_MODE, assume CONFIG_SGI_SN_M_MODE */ -#define MAX_MEM_SLOTS 32 /* max slots per node */ +#define MAX_MEM_SLOTS 32 /* max slots per node */ #endif /* CONFIG_SGI_SN_M_MODE */ -#define SLOT_SHIFT (27) +#define SLOT_SHIFT (27) #define SLOT_MIN_MEM_SIZE (32*1024*1024) #define CPUS_PER_NODE 2 /* CPUs on a single hub */ diff --git a/arch/mips/include/asm/sn/sn0/hub.h b/arch/mips/include/asm/sn/sn0/hub.h index 3e228f8e7969..d78dd76d5dcf 100644 --- a/arch/mips/include/asm/sn/sn0/hub.h +++ b/arch/mips/include/asm/sn/sn0/hub.h @@ -19,8 +19,8 @@ #define HUB_REV_2_0 2 #define HUB_REV_2_1 3 #define HUB_REV_2_2 4 -#define HUB_REV_2_3 5 -#define HUB_REV_2_4 6 +#define HUB_REV_2_3 5 +#define HUB_REV_2_4 6 #define MAX_HUB_PATH 80 @@ -32,9 +32,9 @@ //#include <asm/sn/sn0/hubcore.h> /* Translation of uncached attributes */ -#define UATTR_HSPEC 0 -#define UATTR_IO 1 -#define UATTR_MSPEC 2 -#define UATTR_UNCAC 3 +#define UATTR_HSPEC 0 +#define UATTR_IO 1 +#define UATTR_MSPEC 2 +#define UATTR_UNCAC 3 #endif /* _ASM_SN_SN0_HUB_H */ diff --git a/arch/mips/include/asm/sn/sn0/hubio.h b/arch/mips/include/asm/sn/sn0/hubio.h index 46286d8302a7..5998b13e9764 100644 --- a/arch/mips/include/asm/sn/sn0/hubio.h +++ b/arch/mips/include/asm/sn/sn0/hubio.h @@ -8,8 +8,8 @@ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. * Copyright (C) 1999 by Ralf Baechle */ -#ifndef _ASM_SGI_SN_SN0_HUBIO_H -#define _ASM_SGI_SN_SN0_HUBIO_H +#ifndef _ASM_SGI_SN_SN0_HUBIO_H +#define _ASM_SGI_SN_SN0_HUBIO_H /* * Hub I/O interface registers @@ -22,7 +22,7 @@ * Slightly friendlier names for some common registers. * The hardware definitions follow. */ -#define IIO_WIDGET IIO_WID /* Widget identification */ +#define IIO_WIDGET IIO_WID /* Widget identification */ #define IIO_WIDGET_STAT IIO_WSTAT /* Widget status register */ #define IIO_WIDGET_CTRL IIO_WCR /* Widget control register */ #define IIO_WIDGET_TOUT IIO_WRTO /* Widget request timeout */ @@ -37,21 +37,21 @@ #define IIO_XTALKCC_TOUT IIO_IXCC /* Xtalk credit count timeout*/ #define IIO_XTALKTT_TOUT IIO_IXTT /* Xtalk tail timeout */ #define IIO_IO_ERR_CLR IIO_IECLR /* IO error clear */ -#define IIO_BTE_CRB_CNT IIO_IBCN /* IO BTE CRB count */ +#define IIO_BTE_CRB_CNT IIO_IBCN /* IO BTE CRB count */ #define IIO_LLP_CSR_IS_UP 0x00002000 -#define IIO_LLP_CSR_LLP_STAT_MASK 0x00003000 -#define IIO_LLP_CSR_LLP_STAT_SHFT 12 +#define IIO_LLP_CSR_LLP_STAT_MASK 0x00003000 +#define IIO_LLP_CSR_LLP_STAT_SHFT 12 /* key to IIO_PROTECT_OVRRD */ #define IIO_PROTECT_OVRRD_KEY 0x53474972756c6573ull /* "SGIrules" */ /* BTE register names */ #define IIO_BTE_STAT_0 IIO_IBLS_0 /* Also BTE length/status 0 */ -#define IIO_BTE_SRC_0 IIO_IBSA_0 /* Also BTE source address 0 */ +#define IIO_BTE_SRC_0 IIO_IBSA_0 /* Also BTE source address 0 */ #define IIO_BTE_DEST_0 IIO_IBDA_0 /* Also BTE dest. address 0 */ #define IIO_BTE_CTRL_0 IIO_IBCT_0 /* Also BTE control/terminate 0 */ -#define IIO_BTE_NOTIFY_0 IIO_IBNA_0 /* Also BTE notification 0 */ +#define IIO_BTE_NOTIFY_0 IIO_IBNA_0 /* Also BTE notification 0 */ #define IIO_BTE_INT_0 IIO_IBIA_0 /* Also BTE interrupt 0 */ #define IIO_BTE_OFF_0 0 /* Base offset from BTE 0 regs. */ #define IIO_BTE_OFF_1 IIO_IBLS_1 - IIO_IBLS_0 /* Offset from base to BTE 1 */ @@ -83,11 +83,11 @@ #define IIO_WSTAT 0x400008 /* Widget status */ #define IIO_WCR 0x400020 /* Widget control */ -#define IIO_WSTAT_ECRAZY (1ULL << 32) /* Hub gone crazy */ -#define IIO_WSTAT_TXRETRY (1ULL << 9) /* Hub Tx Retry timeout */ -#define IIO_WSTAT_TXRETRY_MASK (0x7F) -#define IIO_WSTAT_TXRETRY_SHFT (16) -#define IIO_WSTAT_TXRETRY_CNT(w) (((w) >> IIO_WSTAT_TXRETRY_SHFT) & \ +#define IIO_WSTAT_ECRAZY (1ULL << 32) /* Hub gone crazy */ +#define IIO_WSTAT_TXRETRY (1ULL << 9) /* Hub Tx Retry timeout */ +#define IIO_WSTAT_TXRETRY_MASK (0x7F) +#define IIO_WSTAT_TXRETRY_SHFT (16) +#define IIO_WSTAT_TXRETRY_CNT(w) (((w) >> IIO_WSTAT_TXRETRY_SHFT) & \ IIO_WSTAT_TXRETRY_MASK) #define IIO_ILAPR 0x400100 /* Local Access Protection */ @@ -130,12 +130,12 @@ #define IIO_IGFX_INIT(widget, node, cpu, valid) (\ (((widget) & IIO_IGFX_W_NUM_MASK) << IIO_IGFX_W_NUM_SHIFT) | \ (((node) & IIO_IGFX_N_NUM_MASK) << IIO_IGFX_N_NUM_SHIFT) | \ - (((cpu) & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT) | \ - (((valid) & IIO_IGFX_VLD_MASK) << IIO_IGFX_VLD_SHIFT) ) + (((cpu) & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT) | \ + (((valid) & IIO_IGFX_VLD_MASK) << IIO_IGFX_VLD_SHIFT) ) /* Scratch registers (not all bits available) */ #define IIO_SCRATCH_REG0 0x400150 -#define IIO_SCRATCH_REG1 0x400158 +#define IIO_SCRATCH_REG1 0x400158 #define IIO_SCRATCH_MASK 0x0000000f00f11fff #define IIO_SCRATCH_BIT0_0 0x0000000800000000 @@ -174,43 +174,43 @@ typedef union hubii_wid_u { u64 wid_reg_value; struct { - u64 wid_rsvd: 32, /* unused */ + u64 wid_rsvd: 32, /* unused */ wid_rev_num: 4, /* revision number */ wid_part_num: 16, /* the widget type: hub=c101 */ wid_mfg_num: 11, /* Manufacturer id (IBM) */ wid_rsvd1: 1; /* Reserved */ - } wid_fields_s; + } wid_fields_s; } hubii_wid_t; typedef union hubii_wcr_u { u64 wcr_reg_value; struct { - u64 wcr_rsvd: 41, /* unused */ + u64 wcr_rsvd: 41, /* unused */ wcr_e_thresh: 5, /* elasticity threshold */ wcr_dir_con: 1, /* widget direct connect */ wcr_f_bad_pkt: 1, /* Force bad llp pkt enable */ wcr_xbar_crd: 3, /* LLP crossbar credit */ wcr_rsvd1: 8, /* Reserved */ - wcr_tag_mode: 1, /* Tag mode */ + wcr_tag_mode: 1, /* Tag mode */ wcr_widget_id: 4; /* LLP crossbar credit */ - } wcr_fields_s; + } wcr_fields_s; } hubii_wcr_t; -#define iwcr_dir_con wcr_fields_s.wcr_dir_con +#define iwcr_dir_con wcr_fields_s.wcr_dir_con typedef union hubii_wstat_u { - u64 reg_value; + u64 reg_value; struct { u64 rsvd1: 31, crazy: 1, /* Crazy bit */ rsvd2: 8, - llp_tx_cnt: 8, /* LLP Xmit retry counter */ + llp_tx_cnt: 8, /* LLP Xmit retry counter */ rsvd3: 6, tx_max_rtry: 1, /* LLP Retry Timeout Signal */ rsvd4: 2, xt_tail_to: 1, /* Xtalk Tail Timeout */ - xt_crd_to: 1, /* Xtalk Credit Timeout */ + xt_crd_to: 1, /* Xtalk Credit Timeout */ pending: 4; /* Pending Requests */ } wstat_fields_s; } hubii_wstat_t; @@ -219,50 +219,50 @@ typedef union hubii_wstat_u { typedef union hubii_ilcsr_u { u64 icsr_reg_value; struct { - u64 icsr_rsvd: 22, /* unused */ - icsr_max_burst: 10, /* max burst */ - icsr_rsvd4: 6, /* reserved */ - icsr_max_retry: 10, /* max retry */ - icsr_rsvd3: 2, /* reserved */ - icsr_lnk_stat: 2, /* link status */ - icsr_bm8: 1, /* Bit mode 8 */ - icsr_llp_en: 1, /* LLP enable bit */ - icsr_rsvd2: 1, /* reserver */ - icsr_wrm_reset: 1, /* Warm reset bit */ + u64 icsr_rsvd: 22, /* unused */ + icsr_max_burst: 10, /* max burst */ + icsr_rsvd4: 6, /* reserved */ + icsr_max_retry: 10, /* max retry */ + icsr_rsvd3: 2, /* reserved */ + icsr_lnk_stat: 2, /* link status */ + icsr_bm8: 1, /* Bit mode 8 */ + icsr_llp_en: 1, /* LLP enable bit */ + icsr_rsvd2: 1, /* reserver */ + icsr_wrm_reset: 1, /* Warm reset bit */ icsr_rsvd1: 2, /* Data ready offset */ - icsr_null_to: 6; /* Null timeout */ + icsr_null_to: 6; /* Null timeout */ - } icsr_fields_s; + } icsr_fields_s; } hubii_ilcsr_t; typedef union hubii_iowa_u { u64 iowa_reg_value; struct { - u64 iowa_rsvd: 48, /* unused */ + u64 iowa_rsvd: 48, /* unused */ iowa_wxoac: 8, /* xtalk widget access bits */ iowa_rsvd1: 7, /* xtalk widget access bits */ iowa_w0oac: 1; /* xtalk widget access bits */ - } iowa_fields_s; + } iowa_fields_s; } hubii_iowa_t; typedef union hubii_iiwa_u { u64 iiwa_reg_value; struct { - u64 iiwa_rsvd: 48, /* unused */ + u64 iiwa_rsvd: 48, /* unused */ iiwa_wxiac: 8, /* hub wid access bits */ iiwa_rsvd1: 7, /* reserved */ iiwa_w0iac: 1; /* hub wid0 access */ - } iiwa_fields_s; + } iiwa_fields_s; } hubii_iiwa_t; typedef union hubii_illr_u { u64 illr_reg_value; struct { - u64 illr_rsvd: 32, /* unused */ + u64 illr_rsvd: 32, /* unused */ illr_cb_cnt: 16, /* checkbit error count */ illr_sn_cnt: 16; /* sequence number count */ - } illr_fields_s; + } illr_fields_s; } hubii_illr_t; /* The structures below are defined to extract and modify the ii @@ -273,7 +273,7 @@ performance registers */ typedef union io_perf_sel { u64 perf_sel_reg; struct { - u64 perf_rsvd : 48, + u64 perf_rsvd : 48, perf_icct : 8, perf_ippr1 : 4, perf_ippr0 : 4; @@ -301,7 +301,7 @@ typedef union io_perf_cnt { #define IIO_LLP_SN_MAX 0xffff /* IO PRB Entries */ -#define IIO_NUM_IPRBS (9) +#define IIO_NUM_IPRBS (9) #define IIO_IOPRB_0 0x400198 /* PRB entry 0 */ #define IIO_IOPRB_8 0x4001a0 /* PRB entry 8 */ #define IIO_IOPRB_9 0x4001a8 /* PRB entry 9 */ @@ -318,21 +318,21 @@ typedef union io_perf_cnt { #define IIO_IMEM 0x4001e8 /* Miscellaneous Enable Mask */ #define IIO_IXTT 0x4001f0 /* Crosstalk tail timeout */ #define IIO_IECLR 0x4001f8 /* IO error clear */ -#define IIO_IBCN 0x400200 /* IO BTE CRB count */ +#define IIO_IBCN 0x400200 /* IO BTE CRB count */ /* * IIO_IMEM Register fields. */ -#define IIO_IMEM_W0ESD 0x1 /* Widget 0 shut down due to error */ -#define IIO_IMEM_B0ESD (1 << 4) /* BTE 0 shut down due to error */ -#define IIO_IMEM_B1ESD (1 << 8) /* BTE 1 Shut down due to error */ +#define IIO_IMEM_W0ESD 0x1 /* Widget 0 shut down due to error */ +#define IIO_IMEM_B0ESD (1 << 4) /* BTE 0 shut down due to error */ +#define IIO_IMEM_B1ESD (1 << 8) /* BTE 1 Shut down due to error */ /* PIO Read address Table Entries */ #define IIO_IPCA 0x400300 /* PRB Counter adjust */ #define IIO_NUM_PRTES 8 /* Total number of PRB table entries */ #define IIO_PRTE_0 0x400308 /* PIO Read address table entry 0 */ #define IIO_PRTE(_x) (IIO_PRTE_0 + (8 * (_x))) -#define IIO_WIDPRTE(x) IIO_PRTE(((x) - 8)) /* widget ID to its PRTE num */ +#define IIO_WIDPRTE(x) IIO_PRTE(((x) - 8)) /* widget ID to its PRTE num */ #define IIO_IPDR 0x400388 /* PIO table entry deallocation */ #define IIO_ICDR 0x400390 /* CRB Entry Deallocation */ #define IIO_IFDR 0x400398 /* IOQ FIFO Depth */ @@ -369,35 +369,35 @@ typedef union io_perf_cnt { /* * IIO PIO Deallocation register field masks : (IIO_IPDR) */ -#define IIO_IPDR_PND (1 << 4) +#define IIO_IPDR_PND (1 << 4) /* * IIO CRB deallocation register field masks: (IIO_ICDR) */ -#define IIO_ICDR_PND (1 << 4) +#define IIO_ICDR_PND (1 << 4) /* * IIO CRB control register Fields: IIO_ICCR */ -#define IIO_ICCR_PENDING (0x10000) -#define IIO_ICCR_CMD_MASK (0xFF) -#define IIO_ICCR_CMD_SHFT (7) -#define IIO_ICCR_CMD_NOP (0x0) /* No Op */ -#define IIO_ICCR_CMD_WAKE (0x100) /* Reactivate CRB entry and process */ -#define IIO_ICCR_CMD_TIMEOUT (0x200) /* Make CRB timeout & mark invalid */ -#define IIO_ICCR_CMD_EJECT (0x400) /* Contents of entry written to memory +#define IIO_ICCR_PENDING (0x10000) +#define IIO_ICCR_CMD_MASK (0xFF) +#define IIO_ICCR_CMD_SHFT (7) +#define IIO_ICCR_CMD_NOP (0x0) /* No Op */ +#define IIO_ICCR_CMD_WAKE (0x100) /* Reactivate CRB entry and process */ +#define IIO_ICCR_CMD_TIMEOUT (0x200) /* Make CRB timeout & mark invalid */ +#define IIO_ICCR_CMD_EJECT (0x400) /* Contents of entry written to memory * via a WB */ -#define IIO_ICCR_CMD_FLUSH (0x800) +#define IIO_ICCR_CMD_FLUSH (0x800) /* * CRB manipulation macros * The CRB macros are slightly complicated, since there are up to - * four registers associated with each CRB entry. + * four registers associated with each CRB entry. */ #define IIO_NUM_CRBS 15 /* Number of CRBs */ -#define IIO_NUM_NORMAL_CRBS 12 /* Number of regular CRB entries */ -#define IIO_NUM_PC_CRBS 4 /* Number of partial cache CRBs */ +#define IIO_NUM_NORMAL_CRBS 12 /* Number of regular CRB entries */ +#define IIO_NUM_PC_CRBS 4 /* Number of partial cache CRBs */ #define IIO_ICRB_OFFSET 8 #define IIO_ICRB_0 0x400400 /* XXX - This is now tuneable: @@ -405,9 +405,9 @@ typedef union io_perf_cnt { */ #define IIO_ICRB_A(_x) (IIO_ICRB_0 + (4 * IIO_ICRB_OFFSET * (_x))) -#define IIO_ICRB_B(_x) (IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET) +#define IIO_ICRB_B(_x) (IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET) #define IIO_ICRB_C(_x) (IIO_ICRB_A(_x) + 2*IIO_ICRB_OFFSET) -#define IIO_ICRB_D(_x) (IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET) +#define IIO_ICRB_D(_x) (IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET) /* XXX - IBUE register coming for Hub 2 */ @@ -444,16 +444,16 @@ typedef union io_perf_cnt { typedef union icrba_u { u64 reg_value; struct { - u64 resvd: 6, + u64 resvd: 6, stall_bte0: 1, /* Stall BTE 0 */ stall_bte1: 1, /* Stall BTE 1 */ error: 1, /* CRB has an error */ - ecode: 3, /* Error Code */ + ecode: 3, /* Error Code */ lnetuce: 1, /* SN0net Uncorrectable error */ - mark: 1, /* CRB Has been marked */ + mark: 1, /* CRB Has been marked */ xerr: 1, /* Error bit set in xtalk header */ sidn: 4, /* SIDN field from xtalk */ - tnum: 5, /* TNUM field in xtalk */ + tnum: 5, /* TNUM field in xtalk */ addr: 38, /* Address of request */ valid: 1, /* Valid status */ iow: 1; /* IO Write operation */ @@ -467,15 +467,15 @@ typedef union h1_icrba_u { u64 reg_value; struct { - u64 resvd: 6, - unused: 1, /* Unused but RW!! */ + u64 resvd: 6, + unused: 1, /* Unused but RW!! */ error: 1, /* CRB has an error */ - ecode: 4, /* Error Code */ + ecode: 4, /* Error Code */ lnetuce: 1, /* SN0net Uncorrectable error */ - mark: 1, /* CRB Has been marked */ + mark: 1, /* CRB Has been marked */ xerr: 1, /* Error bit set in xtalk header */ sidn: 4, /* SIDN field from xtalk */ - tnum: 5, /* TNUM field in xtalk */ + tnum: 5, /* TNUM field in xtalk */ addr: 38, /* Address of request */ valid: 1, /* Valid status */ iow: 1; /* IO Write operation */ @@ -488,21 +488,21 @@ typedef union h1_icrba_u { #endif /* !__ASSEMBLY__ */ -#define IIO_ICRB_ADDR_SHFT 2 /* Shift to get proper address */ +#define IIO_ICRB_ADDR_SHFT 2 /* Shift to get proper address */ /* * values for "ecode" field */ -#define IIO_ICRB_ECODE_DERR 0 /* Directory error due to IIO access */ -#define IIO_ICRB_ECODE_PERR 1 /* Poison error on IO access */ -#define IIO_ICRB_ECODE_WERR 2 /* Write error by IIO access +#define IIO_ICRB_ECODE_DERR 0 /* Directory error due to IIO access */ +#define IIO_ICRB_ECODE_PERR 1 /* Poison error on IO access */ +#define IIO_ICRB_ECODE_WERR 2 /* Write error by IIO access * e.g. WINV to a Read only line. */ -#define IIO_ICRB_ECODE_AERR 3 /* Access error caused by IIO access */ -#define IIO_ICRB_ECODE_PWERR 4 /* Error on partial write */ -#define IIO_ICRB_ECODE_PRERR 5 /* Error on partial read */ -#define IIO_ICRB_ECODE_TOUT 6 /* CRB timeout before deallocating */ -#define IIO_ICRB_ECODE_XTERR 7 /* Incoming xtalk pkt had error bit */ +#define IIO_ICRB_ECODE_AERR 3 /* Access error caused by IIO access */ +#define IIO_ICRB_ECODE_PWERR 4 /* Error on partial write */ +#define IIO_ICRB_ECODE_PRERR 5 /* Error on partial read */ +#define IIO_ICRB_ECODE_TOUT 6 /* CRB timeout before deallocating */ +#define IIO_ICRB_ECODE_XTERR 7 /* Incoming xtalk pkt had error bit */ @@ -513,10 +513,10 @@ typedef union h1_icrba_u { typedef union icrbb_u { u64 reg_value; struct { - u64 rsvd1: 5, - btenum: 1, /* BTE to which entry belongs to */ - cohtrans: 1, /* Coherent transaction */ - xtsize: 2, /* Xtalk operation size + u64 rsvd1: 5, + btenum: 1, /* BTE to which entry belongs to */ + cohtrans: 1, /* Coherent transaction */ + xtsize: 2, /* Xtalk operation size * 0: Double Word * 1: 32 Bytes. * 2: 128 Bytes, @@ -526,11 +526,11 @@ typedef union icrbb_u { srcinit: 2, /* Source Initiator: * See below for field values. */ - useold: 1, /* Use OLD command for processing */ + useold: 1, /* Use OLD command for processing */ imsgtype: 2, /* Incoming message type * see below for field values */ - imsg: 8, /* Incoming message */ + imsg: 8, /* Incoming message */ initator: 3, /* Initiator of original request * See below for field values. */ @@ -538,12 +538,12 @@ typedef union icrbb_u { * See below for field values. */ rsvd2: 7, - ackcnt: 11, /* Invalidate ack count */ + ackcnt: 11, /* Invalidate ack count */ resp: 1, /* data response given to processor */ - ack: 1, /* indicates data ack received */ + ack: 1, /* indicates data ack received */ hold: 1, /* entry is gathering inval acks */ wb_pend:1, /* waiting for writeback to complete */ - intvn: 1, /* Intervention */ + intvn: 1, /* Intervention */ stall_ib: 1, /* Stall Ibuf (from crosstalk) */ stall_intr: 1; /* Stall internal interrupts */ } icrbb_field_s; @@ -556,9 +556,9 @@ typedef union h1_icrbb_u { u64 reg_value; struct { u64 rsvd1: 5, - btenum: 1, /* BTE to which entry belongs to */ - cohtrans: 1, /* Coherent transaction */ - xtsize: 2, /* Xtalk operation size + btenum: 1, /* BTE to which entry belongs to */ + cohtrans: 1, /* Coherent transaction */ + xtsize: 2, /* Xtalk operation size * 0: Double Word * 1: 32 Bytes. * 2: 128 Bytes, @@ -568,99 +568,99 @@ typedef union h1_icrbb_u { srcinit: 2, /* Source Initiator: * See below for field values. */ - useold: 1, /* Use OLD command for processing */ + useold: 1, /* Use OLD command for processing */ imsgtype: 2, /* Incoming message type * see below for field values */ - imsg: 8, /* Incoming message */ + imsg: 8, /* Incoming message */ initator: 3, /* Initiator of original request * See below for field values. */ - rsvd2: 1, + rsvd2: 1, pcache: 1, /* entry belongs to partial cache */ reqtype: 5, /* Identifies type of request * See below for field values. */ - stl_ib: 1, /* stall Ibus coming from xtalk */ + stl_ib: 1, /* stall Ibus coming from xtalk */ stl_intr: 1, /* Stall internal interrupts */ - stl_bte0: 1, /* Stall BTE 0 */ + stl_bte0: 1, /* Stall BTE 0 */ stl_bte1: 1, /* Stall BTE 1 */ - intrvn: 1, /* Req was target of intervention */ - ackcnt: 11, /* Invalidate ack count */ + intrvn: 1, /* Req was target of intervention */ + ackcnt: 11, /* Invalidate ack count */ resp: 1, /* data response given to processor */ - ack: 1, /* indicates data ack received */ + ack: 1, /* indicates data ack received */ hold: 1, /* entry is gathering inval acks */ wb_pend:1, /* waiting for writeback to complete */ - sleep: 1, /* xtalk req sleeping till IO-sync */ + sleep: 1, /* xtalk req sleeping till IO-sync */ pnd_reply: 1, /* replies not issed due to IOQ full */ pnd_req: 1; /* reqs not issued due to IOQ full */ } h1_icrbb_field_s; } h1_icrbb_t; -#define b_imsgtype icrbb_field_s.imsgtype -#define b_btenum icrbb_field_s.btenum -#define b_cohtrans icrbb_field_s.cohtrans -#define b_xtsize icrbb_field_s.xtsize -#define b_srcnode icrbb_field_s.srcnode -#define b_srcinit icrbb_field_s.srcinit -#define b_imsgtype icrbb_field_s.imsgtype -#define b_imsg icrbb_field_s.imsg -#define b_initiator icrbb_field_s.initiator +#define b_imsgtype icrbb_field_s.imsgtype +#define b_btenum icrbb_field_s.btenum +#define b_cohtrans icrbb_field_s.cohtrans +#define b_xtsize icrbb_field_s.xtsize +#define b_srcnode icrbb_field_s.srcnode +#define b_srcinit icrbb_field_s.srcinit +#define b_imsgtype icrbb_field_s.imsgtype +#define b_imsg icrbb_field_s.imsg +#define b_initiator icrbb_field_s.initiator #endif /* !__ASSEMBLY__ */ /* * values for field xtsize */ -#define IIO_ICRB_XTSIZE_DW 0 /* Xtalk operation size is 8 bytes */ -#define IIO_ICRB_XTSIZE_32 1 /* Xtalk operation size is 32 bytes */ -#define IIO_ICRB_XTSIZE_128 2 /* Xtalk operation size is 128 bytes */ +#define IIO_ICRB_XTSIZE_DW 0 /* Xtalk operation size is 8 bytes */ +#define IIO_ICRB_XTSIZE_32 1 /* Xtalk operation size is 32 bytes */ +#define IIO_ICRB_XTSIZE_128 2 /* Xtalk operation size is 128 bytes */ /* * values for field srcinit */ -#define IIO_ICRB_PROC0 0 /* Source of request is Proc 0 */ -#define IIO_ICRB_PROC1 1 /* Source of request is Proc 1 */ -#define IIO_ICRB_GB_REQ 2 /* Source is Guaranteed BW request */ -#define IIO_ICRB_IO_REQ 3 /* Source is Normal IO request */ +#define IIO_ICRB_PROC0 0 /* Source of request is Proc 0 */ +#define IIO_ICRB_PROC1 1 /* Source of request is Proc 1 */ +#define IIO_ICRB_GB_REQ 2 /* Source is Guaranteed BW request */ +#define IIO_ICRB_IO_REQ 3 /* Source is Normal IO request */ /* * Values for field imsgtype */ -#define IIO_ICRB_IMSGT_XTALK 0 /* Incoming Meessage from Xtalk */ -#define IIO_ICRB_IMSGT_BTE 1 /* Incoming message from BTE */ -#define IIO_ICRB_IMSGT_SN0NET 2 /* Incoming message from SN0 net */ -#define IIO_ICRB_IMSGT_CRB 3 /* Incoming message from CRB ??? */ +#define IIO_ICRB_IMSGT_XTALK 0 /* Incoming Meessage from Xtalk */ +#define IIO_ICRB_IMSGT_BTE 1 /* Incoming message from BTE */ +#define IIO_ICRB_IMSGT_SN0NET 2 /* Incoming message from SN0 net */ +#define IIO_ICRB_IMSGT_CRB 3 /* Incoming message from CRB ??? */ /* * values for field initiator. */ -#define IIO_ICRB_INIT_XTALK 0 /* Message originated in xtalk */ -#define IIO_ICRB_INIT_BTE0 0x1 /* Message originated in BTE 0 */ -#define IIO_ICRB_INIT_SN0NET 0x2 /* Message originated in SN0net */ -#define IIO_ICRB_INIT_CRB 0x3 /* Message originated in CRB ? */ -#define IIO_ICRB_INIT_BTE1 0x5 /* MEssage originated in BTE 1 */ +#define IIO_ICRB_INIT_XTALK 0 /* Message originated in xtalk */ +#define IIO_ICRB_INIT_BTE0 0x1 /* Message originated in BTE 0 */ +#define IIO_ICRB_INIT_SN0NET 0x2 /* Message originated in SN0net */ +#define IIO_ICRB_INIT_CRB 0x3 /* Message originated in CRB ? */ +#define IIO_ICRB_INIT_BTE1 0x5 /* MEssage originated in BTE 1 */ /* * Values for field reqtype. */ /* XXX - Need to fix this for Hub 2 */ -#define IIO_ICRB_REQ_DWRD 0 /* Request type double word */ -#define IIO_ICRB_REQ_QCLRD 1 /* Request is Qrtr Caceh line Rd */ -#define IIO_ICRB_REQ_BLKRD 2 /* Request is block read */ -#define IIO_ICRB_REQ_RSHU 6 /* Request is BTE block read */ -#define IIO_ICRB_REQ_REXU 7 /* request is BTE Excl Read */ -#define IIO_ICRB_REQ_RDEX 8 /* Request is Read Exclusive */ -#define IIO_ICRB_REQ_WINC 9 /* Request is Write Invalidate */ -#define IIO_ICRB_REQ_BWINV 10 /* Request is BTE Winv */ -#define IIO_ICRB_REQ_PIORD 11 /* Request is PIO read */ -#define IIO_ICRB_REQ_PIOWR 12 /* Request is PIO Write */ -#define IIO_ICRB_REQ_PRDM 13 /* Request is Fetch&Op */ -#define IIO_ICRB_REQ_PWRM 14 /* Request is Store &Op */ -#define IIO_ICRB_REQ_PTPWR 15 /* Request is Peer to peer */ -#define IIO_ICRB_REQ_WB 16 /* Request is Write back */ -#define IIO_ICRB_REQ_DEX 17 /* Retained DEX Cache line */ +#define IIO_ICRB_REQ_DWRD 0 /* Request type double word */ +#define IIO_ICRB_REQ_QCLRD 1 /* Request is Qrtr Caceh line Rd */ +#define IIO_ICRB_REQ_BLKRD 2 /* Request is block read */ +#define IIO_ICRB_REQ_RSHU 6 /* Request is BTE block read */ +#define IIO_ICRB_REQ_REXU 7 /* request is BTE Excl Read */ +#define IIO_ICRB_REQ_RDEX 8 /* Request is Read Exclusive */ +#define IIO_ICRB_REQ_WINC 9 /* Request is Write Invalidate */ +#define IIO_ICRB_REQ_BWINV 10 /* Request is BTE Winv */ +#define IIO_ICRB_REQ_PIORD 11 /* Request is PIO read */ +#define IIO_ICRB_REQ_PIOWR 12 /* Request is PIO Write */ +#define IIO_ICRB_REQ_PRDM 13 /* Request is Fetch&Op */ +#define IIO_ICRB_REQ_PWRM 14 /* Request is Store &Op */ +#define IIO_ICRB_REQ_PTPWR 15 /* Request is Peer to peer */ +#define IIO_ICRB_REQ_WB 16 /* Request is Write back */ +#define IIO_ICRB_REQ_DEX 17 /* Retained DEX Cache line */ /* * Fields in CRB Register C @@ -674,8 +674,8 @@ typedef union icrbc_s { u64 rsvd: 6, sleep: 1, pricnt: 4, /* Priority count sent with Read req */ - pripsc: 4, /* Priority Pre scalar */ - bteop: 1, /* BTE Operation */ + pripsc: 4, /* Priority Pre scalar */ + bteop: 1, /* BTE Operation */ push_be: 34, /* Push address Byte enable * Holds push addr, if CRB is for BTE * If CRB belongs to Partial cache, @@ -684,20 +684,20 @@ typedef union icrbc_s { */ suppl: 11, /* Supplemental field */ barrop: 1, /* Barrier Op bit set in xtalk req */ - doresp: 1, /* Xtalk req needs a response */ - gbr: 1; /* GBR bit set in xtalk packet */ + doresp: 1, /* Xtalk req needs a response */ + gbr: 1; /* GBR bit set in xtalk packet */ } icrbc_field_s; } icrbc_t; -#define c_pricnt icrbc_field_s.pricnt -#define c_pripsc icrbc_field_s.pripsc -#define c_bteop icrbc_field_s.bteop -#define c_bteaddr icrbc_field_s.push_be /* push_be field has 2 names */ -#define c_benable icrbc_field_s.push_be /* push_be field has 2 names */ -#define c_suppl icrbc_field_s.suppl -#define c_barrop icrbc_field_s.barrop -#define c_doresp icrbc_field_s.doresp -#define c_gbr icrbc_field_s.gbr +#define c_pricnt icrbc_field_s.pricnt +#define c_pripsc icrbc_field_s.pripsc +#define c_bteop icrbc_field_s.bteop +#define c_bteaddr icrbc_field_s.push_be /* push_be field has 2 names */ +#define c_benable icrbc_field_s.push_be /* push_be field has 2 names */ +#define c_suppl icrbc_field_s.suppl +#define c_barrop icrbc_field_s.barrop +#define c_doresp icrbc_field_s.doresp +#define c_gbr icrbc_field_s.gbr #endif /* !__ASSEMBLY__ */ /* @@ -708,31 +708,31 @@ typedef union icrbc_s { typedef union icrbd_s { u64 reg_value; struct { - u64 rsvd: 38, + u64 rsvd: 38, toutvld: 1, /* Timeout in progress for this CRB */ - ctxtvld: 1, /* Context field below is valid */ + ctxtvld: 1, /* Context field below is valid */ rsvd2: 1, - context: 15, /* Bit vector: + context: 15, /* Bit vector: * Has a bit set for each CRB entry * which needs to be deallocated * before this CRB entry is processed. * Set only for barrier operations. */ - timeout: 8; /* Timeout Upper 8 bits */ + timeout: 8; /* Timeout Upper 8 bits */ } icrbd_field_s; } icrbd_t; -#define icrbd_toutvld icrbd_field_s.toutvld -#define icrbd_ctxtvld icrbd_field_s.ctxtvld -#define icrbd_context icrbd_field_s.context +#define icrbd_toutvld icrbd_field_s.toutvld +#define icrbd_ctxtvld icrbd_field_s.ctxtvld +#define icrbd_context icrbd_field_s.context typedef union hubii_ifdr_u { u64 hi_ifdr_value; struct { u64 ifdr_rsvd: 49, - ifdr_maxrp: 7, - ifdr_rsvd1: 1, + ifdr_maxrp: 7, + ifdr_rsvd1: 1, ifdr_maxrq: 7; } hi_ifdr_fields; } hubii_ifdr_t; @@ -789,26 +789,26 @@ typedef union hubii_ifdr_u { typedef union iprte_a { u64 entry; struct { - u64 rsvd1 : 7, /* Reserved field */ - valid : 1, /* Maps to a timeout entry */ - rsvd2 : 1, - srcnode : 9, /* Node which did this PIO */ - initiator : 2, /* If T5A or T5B or IO */ - rsvd3 : 3, - addr : 38, /* Physical address of PIO */ - rsvd4 : 3; + u64 rsvd1 : 7, /* Reserved field */ + valid : 1, /* Maps to a timeout entry */ + rsvd2 : 1, + srcnode : 9, /* Node which did this PIO */ + initiator : 2, /* If T5A or T5B or IO */ + rsvd3 : 3, + addr : 38, /* Physical address of PIO */ + rsvd4 : 3; } iprte_fields; } iprte_a_t; -#define iprte_valid iprte_fields.valid -#define iprte_timeout iprte_fields.timeout -#define iprte_srcnode iprte_fields.srcnode -#define iprte_init iprte_fields.initiator -#define iprte_addr iprte_fields.addr +#define iprte_valid iprte_fields.valid +#define iprte_timeout iprte_fields.timeout +#define iprte_srcnode iprte_fields.srcnode +#define iprte_init iprte_fields.initiator +#define iprte_addr iprte_fields.addr #endif /* !__ASSEMBLY__ */ -#define IPRTE_ADDRSHFT 3 +#define IPRTE_ADDRSHFT 3 /* * Hub IIO PRB Register format. @@ -823,14 +823,14 @@ typedef union iprte_a { typedef union iprb_u { u64 reg_value; struct { - u64 rsvd1: 15, + u64 rsvd1: 15, error: 1, /* Widget rcvd wr resp pkt w/ error */ - ovflow: 5, /* Overflow count. perf measurement */ + ovflow: 5, /* Overflow count. perf measurement */ fire_and_forget: 1, /* Launch Write without response */ mode: 2, /* Widget operation Mode */ rsvd2: 2, bnakctr: 14, - rsvd3: 2, + rsvd3: 2, anakctr: 14, xtalkctr: 8; } iprb_fields_s; @@ -838,13 +838,13 @@ typedef union iprb_u { #define iprb_regval reg_value -#define iprb_error iprb_fields_s.error -#define iprb_ovflow iprb_fields_s.ovflow -#define iprb_ff iprb_fields_s.fire_and_forget -#define iprb_mode iprb_fields_s.mode -#define iprb_bnakctr iprb_fields_s.bnakctr -#define iprb_anakctr iprb_fields_s.anakctr -#define iprb_xtalkctr iprb_fields_s.xtalkctr +#define iprb_error iprb_fields_s.error +#define iprb_ovflow iprb_fields_s.ovflow +#define iprb_ff iprb_fields_s.fire_and_forget +#define iprb_mode iprb_fields_s.mode +#define iprb_bnakctr iprb_fields_s.bnakctr +#define iprb_anakctr iprb_fields_s.anakctr +#define iprb_xtalkctr iprb_fields_s.xtalkctr #endif /* !__ASSEMBLY__ */ @@ -853,10 +853,10 @@ typedef union iprb_u { * For details of the meanings of NAK and Accept, refer the PIO flow * document */ -#define IPRB_MODE_NORMAL (0) -#define IPRB_MODE_COLLECT_A (1) /* PRB in collect A mode */ -#define IPRB_MODE_SERVICE_A (2) /* NAK B and Accept A */ -#define IPRB_MODE_SERVICE_B (3) /* NAK A and Accept B */ +#define IPRB_MODE_NORMAL (0) +#define IPRB_MODE_COLLECT_A (1) /* PRB in collect A mode */ +#define IPRB_MODE_SERVICE_A (2) /* NAK B and Accept A */ +#define IPRB_MODE_SERVICE_B (3) /* NAK A and Accept B */ /* * IO CRB entry C_A to E_A : Partial (cache) CRBS @@ -865,31 +865,31 @@ typedef union iprb_u { typedef union icrbp_a { u64 ip_reg; /* the entire register value */ struct { - u64 error: 1, /* 63, error occurred */ - ln_uce: 1, /* 62: uncorrectable memory */ - ln_ae: 1, /* 61: protection violation */ - ln_werr:1, /* 60: write access error */ - ln_aerr:1, /* 59: sn0net: Address error */ - ln_perr:1, /* 58: sn0net: poison error */ - timeout:1, /* 57: CRB timed out */ - l_bdpkt:1, /* 56: truncated pkt on sn0net */ - c_bdpkt:1, /* 55: truncated pkt on xtalk */ - c_err: 1, /* 54: incoming xtalk req, err set*/ + u64 error: 1, /* 63, error occurred */ + ln_uce: 1, /* 62: uncorrectable memory */ + ln_ae: 1, /* 61: protection violation */ + ln_werr:1, /* 60: write access error */ + ln_aerr:1, /* 59: sn0net: Address error */ + ln_perr:1, /* 58: sn0net: poison error */ + timeout:1, /* 57: CRB timed out */ + l_bdpkt:1, /* 56: truncated pkt on sn0net */ + c_bdpkt:1, /* 55: truncated pkt on xtalk */ + c_err: 1, /* 54: incoming xtalk req, err set*/ rsvd1: 12, /* 53-42: reserved */ - valid: 1, /* 41: Valid status */ + valid: 1, /* 41: Valid status */ sidn: 4, /* 40-37: SIDN field of xtalk rqst */ tnum: 5, /* 36-32: TNUM of xtalk request */ - bo: 1, /* 31: barrier op set in xtalk rqst*/ - resprqd:1, /* 30: xtalk rqst requires response*/ - gbr: 1, /* 29: gbr bit set in xtalk rqst */ + bo: 1, /* 31: barrier op set in xtalk rqst*/ + resprqd:1, /* 30: xtalk rqst requires response*/ + gbr: 1, /* 29: gbr bit set in xtalk rqst */ size: 2, /* 28-27: size of xtalk request */ excl: 4, /* 26-23: exclusive bit(s) */ stall: 3, /* 22-20: stall (xtalk, bte 0/1) */ - intvn: 1, /* 19: rqst target of intervention*/ - resp: 1, /* 18: Data response given to t5 */ - ack: 1, /* 17: Data ack received. */ - hold: 1, /* 16: crb gathering invalidate acks*/ - wb: 1, /* 15: writeback pending. */ + intvn: 1, /* 19: rqst target of intervention*/ + resp: 1, /* 18: Data response given to t5 */ + ack: 1, /* 17: Data ack received. */ + hold: 1, /* 16: crb gathering invalidate acks*/ + wb: 1, /* 15: writeback pending. */ ack_cnt:11, /* 14-04: counter of invalidate acks*/ tscaler:4; /* 03-00: Timeout prescaler */ } ip_fmt; @@ -908,13 +908,13 @@ typedef union hubii_idsr { u64 iin_reg; struct { u64 rsvd1 : 35, - isent : 1, - rsvd2 : 3, - ienable: 1, - rsvd : 7, - node : 9, - rsvd4 : 1, - level : 7; + isent : 1, + rsvd2 : 3, + ienable: 1, + rsvd : 7, + node : 9, + rsvd4 : 1, + level : 7; } iin_fmt; } hubii_idsr_t; #endif /* !__ASSEMBLY__ */ @@ -966,7 +966,7 @@ typedef union hubii_idsr { * Value of 3 is required by Xbow 1.1 * We may be able to increase this to 4 with Xbow 1.2. */ -#define HUBII_XBOW_CREDIT 3 +#define HUBII_XBOW_CREDIT 3 #define HUBII_XBOW_REV2_CREDIT 4 #endif /* _ASM_SGI_SN_SN0_HUBIO_H */ diff --git a/arch/mips/include/asm/sn/sn0/hubmd.h b/arch/mips/include/asm/sn/sn0/hubmd.h index 14c225d80664..305d002be182 100644 --- a/arch/mips/include/asm/sn/sn0/hubmd.h +++ b/arch/mips/include/asm/sn/sn0/hubmd.h @@ -8,16 +8,16 @@ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. * Copyright (C) 1999 by Ralf Baechle */ -#ifndef _ASM_SN_SN0_HUBMD_H -#define _ASM_SN_SN0_HUBMD_H +#ifndef _ASM_SN_SN0_HUBMD_H +#define _ASM_SN_SN0_HUBMD_H /* * Hub Memory/Directory interface registers */ -#define CACHE_SLINE_SIZE 128 /* Secondary cache line size on SN0 */ +#define CACHE_SLINE_SIZE 128 /* Secondary cache line size on SN0 */ -#define MAX_REGIONS 64 +#define MAX_REGIONS 64 /* Hardware page size and shift */ @@ -34,62 +34,62 @@ #define MD_IO_PROT_OVRRD 0x200008 /* Clear my bit in MD_IO_PROTECT */ #define MD_HSPEC_PROTECT 0x200010 /* BDDIR, LBOOT, RBOOT protection */ #define MD_MEMORY_CONFIG 0x200018 /* Memory/Directory DIMM control */ -#define MD_REFRESH_CONTROL 0x200020 /* Memory/Directory refresh ctrl */ -#define MD_FANDOP_CAC_STAT 0x200028 /* Fetch-and-op cache status */ -#define MD_MIG_DIFF_THRESH 0x200030 /* Page migr. count diff thresh. */ -#define MD_MIG_VALUE_THRESH 0x200038 /* Page migr. count abs. thresh. */ -#define MD_MIG_CANDIDATE 0x200040 /* Latest page migration candidate */ -#define MD_MIG_CANDIDATE_CLR 0x200048 /* Clear page migration candidate */ -#define MD_DIR_ERROR 0x200050 /* Directory DIMM error */ -#define MD_DIR_ERROR_CLR 0x200058 /* Directory DIMM error clear */ -#define MD_PROTOCOL_ERROR 0x200060 /* Directory protocol error */ +#define MD_REFRESH_CONTROL 0x200020 /* Memory/Directory refresh ctrl */ +#define MD_FANDOP_CAC_STAT 0x200028 /* Fetch-and-op cache status */ +#define MD_MIG_DIFF_THRESH 0x200030 /* Page migr. count diff thresh. */ +#define MD_MIG_VALUE_THRESH 0x200038 /* Page migr. count abs. thresh. */ +#define MD_MIG_CANDIDATE 0x200040 /* Latest page migration candidate */ +#define MD_MIG_CANDIDATE_CLR 0x200048 /* Clear page migration candidate */ +#define MD_DIR_ERROR 0x200050 /* Directory DIMM error */ +#define MD_DIR_ERROR_CLR 0x200058 /* Directory DIMM error clear */ +#define MD_PROTOCOL_ERROR 0x200060 /* Directory protocol error */ #define MD_PROTOCOL_ERROR_CLR 0x200068 /* Directory protocol error clear */ -#define MD_MEM_ERROR 0x200070 /* Memory DIMM error */ -#define MD_MEM_ERROR_CLR 0x200078 /* Memory DIMM error clear */ -#define MD_MISC_ERROR 0x200080 /* Miscellaneous MD error */ +#define MD_MEM_ERROR 0x200070 /* Memory DIMM error */ +#define MD_MEM_ERROR_CLR 0x200078 /* Memory DIMM error clear */ +#define MD_MISC_ERROR 0x200080 /* Miscellaneous MD error */ #define MD_MISC_ERROR_CLR 0x200088 /* Miscellaneous MD error clear */ #define MD_MEM_DIMM_INIT 0x200090 /* Memory DIMM mode initization. */ -#define MD_DIR_DIMM_INIT 0x200098 /* Directory DIMM mode init. */ -#define MD_MOQ_SIZE 0x2000a0 /* MD outgoing queue size */ +#define MD_DIR_DIMM_INIT 0x200098 /* Directory DIMM mode init. */ +#define MD_MOQ_SIZE 0x2000a0 /* MD outgoing queue size */ #define MD_MLAN_CTL 0x2000a8 /* NIC (Microlan) control register */ -#define MD_PERF_SEL 0x210000 /* Select perf monitor events */ -#define MD_PERF_CNT0 0x210010 /* Performance counter 0 */ -#define MD_PERF_CNT1 0x210018 /* Performance counter 1 */ -#define MD_PERF_CNT2 0x210020 /* Performance counter 2 */ -#define MD_PERF_CNT3 0x210028 /* Performance counter 3 */ -#define MD_PERF_CNT4 0x210030 /* Performance counter 4 */ -#define MD_PERF_CNT5 0x210038 /* Performance counter 5 */ - -#define MD_UREG0_0 0x220000 /* uController/UART 0 register */ -#define MD_UREG0_1 0x220008 /* uController/UART 0 register */ -#define MD_UREG0_2 0x220010 /* uController/UART 0 register */ -#define MD_UREG0_3 0x220018 /* uController/UART 0 register */ -#define MD_UREG0_4 0x220020 /* uController/UART 0 register */ -#define MD_UREG0_5 0x220028 /* uController/UART 0 register */ -#define MD_UREG0_6 0x220030 /* uController/UART 0 register */ -#define MD_UREG0_7 0x220038 /* uController/UART 0 register */ +#define MD_PERF_SEL 0x210000 /* Select perf monitor events */ +#define MD_PERF_CNT0 0x210010 /* Performance counter 0 */ +#define MD_PERF_CNT1 0x210018 /* Performance counter 1 */ +#define MD_PERF_CNT2 0x210020 /* Performance counter 2 */ +#define MD_PERF_CNT3 0x210028 /* Performance counter 3 */ +#define MD_PERF_CNT4 0x210030 /* Performance counter 4 */ +#define MD_PERF_CNT5 0x210038 /* Performance counter 5 */ + +#define MD_UREG0_0 0x220000 /* uController/UART 0 register */ +#define MD_UREG0_1 0x220008 /* uController/UART 0 register */ +#define MD_UREG0_2 0x220010 /* uController/UART 0 register */ +#define MD_UREG0_3 0x220018 /* uController/UART 0 register */ +#define MD_UREG0_4 0x220020 /* uController/UART 0 register */ +#define MD_UREG0_5 0x220028 /* uController/UART 0 register */ +#define MD_UREG0_6 0x220030 /* uController/UART 0 register */ +#define MD_UREG0_7 0x220038 /* uController/UART 0 register */ #define MD_SLOTID_USTAT 0x220048 /* Hub slot ID & UART/uCtlr status */ -#define MD_LED0 0x220050 /* Eight-bit LED for CPU A */ -#define MD_LED1 0x220058 /* Eight-bit LED for CPU B */ - -#define MD_UREG1_0 0x220080 /* uController/UART 1 register */ -#define MD_UREG1_1 0x220088 /* uController/UART 1 register */ -#define MD_UREG1_2 0x220090 /* uController/UART 1 register */ -#define MD_UREG1_3 0x220098 /* uController/UART 1 register */ -#define MD_UREG1_4 0x2200a0 /* uController/UART 1 register */ -#define MD_UREG1_5 0x2200a8 /* uController/UART 1 register */ -#define MD_UREG1_6 0x2200b0 /* uController/UART 1 register */ -#define MD_UREG1_7 0x2200b8 /* uController/UART 1 register */ -#define MD_UREG1_8 0x2200c0 /* uController/UART 1 register */ -#define MD_UREG1_9 0x2200c8 /* uController/UART 1 register */ -#define MD_UREG1_10 0x2200d0 /* uController/UART 1 register */ -#define MD_UREG1_11 0x2200d8 /* uController/UART 1 register */ -#define MD_UREG1_12 0x2200e0 /* uController/UART 1 register */ -#define MD_UREG1_13 0x2200e8 /* uController/UART 1 register */ -#define MD_UREG1_14 0x2200f0 /* uController/UART 1 register */ -#define MD_UREG1_15 0x2200f8 /* uController/UART 1 register */ +#define MD_LED0 0x220050 /* Eight-bit LED for CPU A */ +#define MD_LED1 0x220058 /* Eight-bit LED for CPU B */ + +#define MD_UREG1_0 0x220080 /* uController/UART 1 register */ +#define MD_UREG1_1 0x220088 /* uController/UART 1 register */ +#define MD_UREG1_2 0x220090 /* uController/UART 1 register */ +#define MD_UREG1_3 0x220098 /* uController/UART 1 register */ +#define MD_UREG1_4 0x2200a0 /* uController/UART 1 register */ +#define MD_UREG1_5 0x2200a8 /* uController/UART 1 register */ +#define MD_UREG1_6 0x2200b0 /* uController/UART 1 register */ +#define MD_UREG1_7 0x2200b8 /* uController/UART 1 register */ +#define MD_UREG1_8 0x2200c0 /* uController/UART 1 register */ +#define MD_UREG1_9 0x2200c8 /* uController/UART 1 register */ +#define MD_UREG1_10 0x2200d0 /* uController/UART 1 register */ +#define MD_UREG1_11 0x2200d8 /* uController/UART 1 register */ +#define MD_UREG1_12 0x2200e0 /* uController/UART 1 register */ +#define MD_UREG1_13 0x2200e8 /* uController/UART 1 register */ +#define MD_UREG1_14 0x2200f0 /* uController/UART 1 register */ +#define MD_UREG1_15 0x2200f8 /* uController/UART 1 register */ #ifdef CONFIG_SGI_SN_N_MODE #define MD_MEM_BANKS 4 /* 4 banks of memory max in N mode */ @@ -106,14 +106,14 @@ * Bits not used by the MD are used by software. */ -#define MD_SIZE_EMPTY 0 /* Valid in MEMORY_CONFIG */ +#define MD_SIZE_EMPTY 0 /* Valid in MEMORY_CONFIG */ #define MD_SIZE_8MB 1 #define MD_SIZE_16MB 2 #define MD_SIZE_32MB 3 /* Broken in Hub 1 */ -#define MD_SIZE_64MB 4 /* Valid in MEMORY_CONFIG */ -#define MD_SIZE_128MB 5 /* Valid in MEMORY_CONFIG */ +#define MD_SIZE_64MB 4 /* Valid in MEMORY_CONFIG */ +#define MD_SIZE_128MB 5 /* Valid in MEMORY_CONFIG */ #define MD_SIZE_256MB 6 -#define MD_SIZE_512MB 7 /* Valid in MEMORY_CONFIG */ +#define MD_SIZE_512MB 7 /* Valid in MEMORY_CONFIG */ #define MD_SIZE_1GB 8 #define MD_SIZE_2GB 9 #define MD_SIZE_4GB 10 @@ -207,16 +207,16 @@ /* MD_SLOTID_USTAT bit definitions */ -#define MSU_CORECLK_TST_SHFT 7 /* You don't wanna know */ +#define MSU_CORECLK_TST_SHFT 7 /* You don't wanna know */ #define MSU_CORECLK_TST_MASK (UINT64_CAST 1 << 7) #define MSU_CORECLK_TST (UINT64_CAST 1 << 7) -#define MSU_CORECLK_SHFT 6 /* You don't wanna know */ +#define MSU_CORECLK_SHFT 6 /* You don't wanna know */ #define MSU_CORECLK_MASK (UINT64_CAST 1 << 6) #define MSU_CORECLK (UINT64_CAST 1 << 6) -#define MSU_NETSYNC_SHFT 5 /* You don't wanna know */ +#define MSU_NETSYNC_SHFT 5 /* You don't wanna know */ #define MSU_NETSYNC_MASK (UINT64_CAST 1 << 5) #define MSU_NETSYNC (UINT64_CAST 1 << 5) -#define MSU_FPROMRDY_SHFT 4 /* Flash PROM ready bit */ +#define MSU_FPROMRDY_SHFT 4 /* Flash PROM ready bit */ #define MSU_FPROMRDY_MASK (UINT64_CAST 1 << 4) #define MSU_FPROMRDY (UINT64_CAST 1 << 4) #define MSU_I2CINTR_SHFT 3 /* I2C interrupt bit */ @@ -228,8 +228,8 @@ #define MSU_SN00_SLOTID_SHFT 7 #define MSU_SN00_SLOTID_MASK (UINT64_CAST 0x80) -#define MSU_PIMM_PSC_SHFT 4 -#define MSU_PIMM_PSC_MASK (0xf << MSU_PIMM_PSC_SHFT) +#define MSU_PIMM_PSC_SHFT 4 +#define MSU_PIMM_PSC_MASK (0xf << MSU_PIMM_PSC_SHFT) /* MD_MIG_DIFF_THRESH bit definitions */ @@ -260,7 +260,7 @@ /* Other MD definitions */ -#define MD_BANK_SHFT 29 /* log2(512 MB) */ +#define MD_BANK_SHFT 29 /* log2(512 MB) */ #define MD_BANK_MASK (UINT64_CAST 7 << 29) #define MD_BANK_SIZE (UINT64_CAST 1 << MD_BANK_SHFT) /* 512 MB */ #define MD_BANK_OFFSET(_b) (UINT64_CAST (_b) << MD_BANK_SHFT) @@ -300,32 +300,32 @@ * Format C: STATE != shared (FINE must be 0) */ -#define MD_PDIR_MASK 0xffffffffffff /* Whole entry */ +#define MD_PDIR_MASK 0xffffffffffff /* Whole entry */ #define MD_PDIR_ECC_SHFT 0 /* ABC low or high */ #define MD_PDIR_ECC_MASK 0x7f -#define MD_PDIR_PRIO_SHFT 8 /* ABC low */ +#define MD_PDIR_PRIO_SHFT 8 /* ABC low */ #define MD_PDIR_PRIO_MASK (0xf << 8) -#define MD_PDIR_AX_SHFT 7 /* ABC low */ +#define MD_PDIR_AX_SHFT 7 /* ABC low */ #define MD_PDIR_AX_MASK (1 << 7) #define MD_PDIR_AX (1 << 7) -#define MD_PDIR_FINE_SHFT 12 /* ABC low */ +#define MD_PDIR_FINE_SHFT 12 /* ABC low */ #define MD_PDIR_FINE_MASK (1 << 12) #define MD_PDIR_FINE (1 << 12) -#define MD_PDIR_OCT_SHFT 13 /* A low */ +#define MD_PDIR_OCT_SHFT 13 /* A low */ #define MD_PDIR_OCT_MASK (7 << 13) -#define MD_PDIR_STATE_SHFT 13 /* BC low */ +#define MD_PDIR_STATE_SHFT 13 /* BC low */ #define MD_PDIR_STATE_MASK (7 << 13) -#define MD_PDIR_ONECNT_SHFT 16 /* BC low */ +#define MD_PDIR_ONECNT_SHFT 16 /* BC low */ #define MD_PDIR_ONECNT_MASK (0x3f << 16) -#define MD_PDIR_PTR_SHFT 22 /* C low */ +#define MD_PDIR_PTR_SHFT 22 /* C low */ #define MD_PDIR_PTR_MASK (UINT64_CAST 0x7ff << 22) -#define MD_PDIR_VECMSB_SHFT 22 /* AB low */ +#define MD_PDIR_VECMSB_SHFT 22 /* AB low */ #define MD_PDIR_VECMSB_BITMASK 0x3ffffff #define MD_PDIR_VECMSB_BITSHFT 27 #define MD_PDIR_VECMSB_MASK (UINT64_CAST MD_PDIR_VECMSB_BITMASK << 22) -#define MD_PDIR_CWOFF_SHFT 7 /* C high */ +#define MD_PDIR_CWOFF_SHFT 7 /* C high */ #define MD_PDIR_CWOFF_MASK (7 << 7) -#define MD_PDIR_VECLSB_SHFT 10 /* AB high */ +#define MD_PDIR_VECLSB_SHFT 10 /* AB high */ #define MD_PDIR_VECLSB_BITMASK (UINT64_CAST 0x3fffffffff) #define MD_PDIR_VECLSB_BITSHFT 0 #define MD_PDIR_VECLSB_MASK (MD_PDIR_VECLSB_BITMASK << 10) @@ -349,25 +349,25 @@ * Format C: STATE != shared */ -#define MD_SDIR_MASK 0xffff /* Whole entry */ +#define MD_SDIR_MASK 0xffff /* Whole entry */ #define MD_SDIR_ECC_SHFT 0 /* AC low or high */ #define MD_SDIR_ECC_MASK 0x1f -#define MD_SDIR_PRIO_SHFT 6 /* AC low */ +#define MD_SDIR_PRIO_SHFT 6 /* AC low */ #define MD_SDIR_PRIO_MASK (1 << 6) -#define MD_SDIR_AX_SHFT 5 /* AC low */ +#define MD_SDIR_AX_SHFT 5 /* AC low */ #define MD_SDIR_AX_MASK (1 << 5) #define MD_SDIR_AX (1 << 5) -#define MD_SDIR_STATE_SHFT 7 /* AC low */ +#define MD_SDIR_STATE_SHFT 7 /* AC low */ #define MD_SDIR_STATE_MASK (7 << 7) -#define MD_SDIR_PTR_SHFT 10 /* C low */ +#define MD_SDIR_PTR_SHFT 10 /* C low */ #define MD_SDIR_PTR_MASK (0x3f << 10) -#define MD_SDIR_CWOFF_SHFT 5 /* C high */ +#define MD_SDIR_CWOFF_SHFT 5 /* C high */ #define MD_SDIR_CWOFF_MASK (7 << 5) -#define MD_SDIR_VECMSB_SHFT 11 /* A low */ +#define MD_SDIR_VECMSB_SHFT 11 /* A low */ #define MD_SDIR_VECMSB_BITMASK 0x1f #define MD_SDIR_VECMSB_BITSHFT 7 #define MD_SDIR_VECMSB_MASK (MD_SDIR_VECMSB_BITMASK << 11) -#define MD_SDIR_VECLSB_SHFT 5 /* A high */ +#define MD_SDIR_VECLSB_SHFT 5 /* A high */ #define MD_SDIR_VECLSB_BITMASK 0x7ff #define MD_SDIR_VECLSB_BITSHFT 0 #define MD_SDIR_VECLSB_MASK (MD_SDIR_VECLSB_BITMASK << 5) @@ -390,7 +390,7 @@ /* Premium SIMM protection entry shifts and masks. */ -#define MD_PPROT_SHFT 0 /* Prot. field */ +#define MD_PPROT_SHFT 0 /* Prot. field */ #define MD_PPROT_MASK 7 #define MD_PPROT_MIGMD_SHFT 3 /* Migration mode */ #define MD_PPROT_MIGMD_MASK (3 << 3) @@ -403,7 +403,7 @@ /* Standard SIMM protection entry shifts and masks. */ -#define MD_SPROT_SHFT 0 /* Prot. field */ +#define MD_SPROT_SHFT 0 /* Prot. field */ #define MD_SPROT_MASK 7 #define MD_SPROT_MIGMD_SHFT 3 /* Migration mode */ #define MD_SPROT_MIGMD_MASK (3 << 3) @@ -431,13 +431,13 @@ #define CPU_LED_ADDR(_nasid, _slice) \ (private.p_sn00 ? \ - REMOTE_HUB_ADDR((_nasid), MD_UREG1_0 + ((_slice) << 5)) : \ + REMOTE_HUB_ADDR((_nasid), MD_UREG1_0 + ((_slice) << 5)) : \ REMOTE_HUB_ADDR((_nasid), MD_LED0 + ((_slice) << 3))) #define SET_CPU_LEDS(_nasid, _slice, _val) \ (HUB_S(CPU_LED_ADDR(_nasid, _slice), (_val))) -#define SET_MY_LEDS(_v) \ +#define SET_MY_LEDS(_v) \ SET_CPU_LEDS(get_nasid(), get_slice(), (_v)) /* @@ -541,7 +541,7 @@ */ struct dir_error_reg { - u64 uce_vld: 1, /* 63: valid directory uce */ + u64 uce_vld: 1, /* 63: valid directory uce */ ae_vld: 1, /* 62: valid dir prot ecc error */ ce_vld: 1, /* 61: valid correctable ECC err*/ rsvd1: 19, /* 60-42: reserved */ @@ -555,13 +555,13 @@ struct dir_error_reg { }; typedef union md_dir_error { - u64 derr_reg; /* the entire register */ + u64 derr_reg; /* the entire register */ struct dir_error_reg derr_fmt; /* the register format */ } md_dir_error_t; struct mem_error_reg { - u64 uce_vld: 1, /* 63: valid memory uce */ + u64 uce_vld: 1, /* 63: valid memory uce */ ce_vld: 1, /* 62: valid correctable ECC err*/ rsvd1: 22, /* 61-40: reserved */ bad_syn: 8, /* 39-32: bad mem ecc syndrome */ @@ -573,8 +573,8 @@ struct mem_error_reg { typedef union md_mem_error { - u64 merr_reg; /* the entire register */ - struct mem_error_reg merr_fmt; /* format of the mem_error reg */ + u64 merr_reg; /* the entire register */ + struct mem_error_reg merr_fmt; /* format of the mem_error reg */ } md_mem_error_t; @@ -594,7 +594,7 @@ struct proto_error_reg { }; typedef union md_proto_error { - u64 perr_reg; /* the entire register */ + u64 perr_reg; /* the entire register */ struct proto_error_reg perr_fmt; /* format of the register */ } md_proto_error_t; @@ -695,33 +695,33 @@ typedef union md_pdir_loent { * represent directory memory information. */ -typedef union md_dir_high { - md_sdir_high_t md_sdir_high; - md_pdir_high_t md_pdir_high; +typedef union md_dir_high { + md_sdir_high_t md_sdir_high; + md_pdir_high_t md_pdir_high; } md_dir_high_t; -typedef union md_dir_low { - md_sdir_low_t md_sdir_low; - md_pdir_low_t md_pdir_low; +typedef union md_dir_low { + md_sdir_low_t md_sdir_low; + md_pdir_low_t md_pdir_low; } md_dir_low_t; -typedef struct bddir_entry { - md_dir_low_t md_dir_low; - md_dir_high_t md_dir_high; +typedef struct bddir_entry { + md_dir_low_t md_dir_low; + md_dir_high_t md_dir_high; } bddir_entry_t; typedef struct dir_mem_entry { - u64 prcpf[MAX_REGIONS]; - bddir_entry_t directory_words[MD_PAGE_SIZE/CACHE_SLINE_SIZE]; + u64 prcpf[MAX_REGIONS]; + bddir_entry_t directory_words[MD_PAGE_SIZE/CACHE_SLINE_SIZE]; } dir_mem_entry_t; typedef union md_perf_sel { - u64 perf_sel_reg; + u64 perf_sel_reg; struct { u64 perf_rsvd : 60, - perf_en : 1, + perf_en : 1, perf_sel : 3; } perf_sel_bits; } md_perf_sel_t; @@ -730,7 +730,7 @@ typedef union md_perf_cnt { u64 perf_cnt; struct { u64 perf_rsvd : 44, - perf_cnt : 20; + perf_cnt : 20; } perf_cnt_bits; } md_perf_cnt_t; diff --git a/arch/mips/include/asm/sn/sn0/hubni.h b/arch/mips/include/asm/sn/sn0/hubni.h index b40d3ef97a12..b73c4bee65f2 100644 --- a/arch/mips/include/asm/sn/sn0/hubni.h +++ b/arch/mips/include/asm/sn/sn0/hubni.h @@ -25,38 +25,38 @@ #define NI_BASE_TABLES 0x630000 #define NI_STATUS_REV_ID 0x600000 /* Hub network status, rev, and ID */ -#define NI_PORT_RESET 0x600008 /* Reset the network interface */ +#define NI_PORT_RESET 0x600008 /* Reset the network interface */ #define NI_PROTECTION 0x600010 /* NI register access permissions */ -#define NI_GLOBAL_PARMS 0x600018 /* LLP parameters */ +#define NI_GLOBAL_PARMS 0x600018 /* LLP parameters */ #define NI_SCRATCH_REG0 0x600100 /* Scratch register 0 (64 bits) */ #define NI_SCRATCH_REG1 0x600108 /* Scratch register 1 (64 bits) */ #define NI_DIAG_PARMS 0x600110 /* Parameters for diags */ #define NI_VECTOR_PARMS 0x600200 /* Vector PIO routing parameters */ -#define NI_VECTOR 0x600208 /* Vector PIO route */ -#define NI_VECTOR_DATA 0x600210 /* Vector PIO data */ -#define NI_VECTOR_STATUS 0x600300 /* Vector PIO return status */ -#define NI_RETURN_VECTOR 0x600308 /* Vector PIO return vector */ -#define NI_VECTOR_READ_DATA 0x600310 /* Vector PIO read data */ +#define NI_VECTOR 0x600208 /* Vector PIO route */ +#define NI_VECTOR_DATA 0x600210 /* Vector PIO data */ +#define NI_VECTOR_STATUS 0x600300 /* Vector PIO return status */ +#define NI_RETURN_VECTOR 0x600308 /* Vector PIO return vector */ +#define NI_VECTOR_READ_DATA 0x600310 /* Vector PIO read data */ #define NI_VECTOR_CLEAR 0x600380 /* Vector PIO read & clear status */ -#define NI_IO_PROTECT 0x600400 /* PIO protection bits */ -#define NI_IO_PROT_OVRRD 0x600408 /* PIO protection bit override */ - -#define NI_AGE_CPU0_MEMORY 0x600500 /* CPU 0 memory age control */ -#define NI_AGE_CPU0_PIO 0x600508 /* CPU 0 PIO age control */ -#define NI_AGE_CPU1_MEMORY 0x600510 /* CPU 1 memory age control */ -#define NI_AGE_CPU1_PIO 0x600518 /* CPU 1 PIO age control */ -#define NI_AGE_GBR_MEMORY 0x600520 /* GBR memory age control */ -#define NI_AGE_GBR_PIO 0x600528 /* GBR PIO age control */ -#define NI_AGE_IO_MEMORY 0x600530 /* IO memory age control */ -#define NI_AGE_IO_PIO 0x600538 /* IO PIO age control */ +#define NI_IO_PROTECT 0x600400 /* PIO protection bits */ +#define NI_IO_PROT_OVRRD 0x600408 /* PIO protection bit override */ + +#define NI_AGE_CPU0_MEMORY 0x600500 /* CPU 0 memory age control */ +#define NI_AGE_CPU0_PIO 0x600508 /* CPU 0 PIO age control */ +#define NI_AGE_CPU1_MEMORY 0x600510 /* CPU 1 memory age control */ +#define NI_AGE_CPU1_PIO 0x600518 /* CPU 1 PIO age control */ +#define NI_AGE_GBR_MEMORY 0x600520 /* GBR memory age control */ +#define NI_AGE_GBR_PIO 0x600528 /* GBR PIO age control */ +#define NI_AGE_IO_MEMORY 0x600530 /* IO memory age control */ +#define NI_AGE_IO_PIO 0x600538 /* IO PIO age control */ #define NI_AGE_REG_MIN NI_AGE_CPU0_MEMORY #define NI_AGE_REG_MAX NI_AGE_IO_PIO -#define NI_PORT_PARMS 0x608000 /* LLP Parameters */ -#define NI_PORT_ERROR 0x608008 /* LLP Errors */ -#define NI_PORT_ERROR_CLEAR 0x608088 /* Clear the error bits */ +#define NI_PORT_PARMS 0x608000 /* LLP Parameters */ +#define NI_PORT_ERROR 0x608008 /* LLP Errors */ +#define NI_PORT_ERROR_CLEAR 0x608088 /* Clear the error bits */ #define NI_META_TABLE0 0x638000 /* First meta routing table entry */ #define NI_META_TABLE(_x) (NI_META_TABLE0 + (8 * (_x))) @@ -76,13 +76,13 @@ #define NSRI_LINKUP_SHFT 29 #define NSRI_LINKUP_MASK (UINT64_CAST 0x1 << 29) #define NSRI_DOWNREASON_SHFT 28 /* 0=failed, 1=never came */ -#define NSRI_DOWNREASON_MASK (UINT64_CAST 0x1 << 28) /* out of reset. */ +#define NSRI_DOWNREASON_MASK (UINT64_CAST 0x1 << 28) /* out of reset. */ #define NSRI_MORENODES_SHFT 18 #define NSRI_MORENODES_MASK (UINT64_CAST 1 << 18) /* Max. # of nodes */ #define MORE_MEMORY 0 #define MORE_NODES 1 #define NSRI_REGIONSIZE_SHFT 17 -#define NSRI_REGIONSIZE_MASK (UINT64_CAST 1 << 17) /* Granularity */ +#define NSRI_REGIONSIZE_MASK (UINT64_CAST 1 << 17) /* Granularity */ #define REGIONSIZE_FINE 1 #define REGIONSIZE_COARSE 0 #define NSRI_NODEID_SHFT 8 @@ -90,14 +90,14 @@ #define NSRI_REV_SHFT 4 #define NSRI_REV_MASK (UINT64_CAST 0xf << 4) /* Chip Revision */ #define NSRI_CHIPID_SHFT 0 -#define NSRI_CHIPID_MASK (UINT64_CAST 0xf) /* Chip type ID */ +#define NSRI_CHIPID_MASK (UINT64_CAST 0xf) /* Chip type ID */ /* - * In fine mode, each node is a region. In coarse mode, there are + * In fine mode, each node is a region. In coarse mode, there are * eight nodes per region. */ #define NASID_TO_FINEREG_SHFT 0 -#define NASID_TO_COARSEREG_SHFT 3 +#define NASID_TO_COARSEREG_SHFT 3 /* NI_PORT_RESET mask definitions */ @@ -111,21 +111,21 @@ /* NI_GLOBAL_PARMS mask and shift definitions */ -#define NGP_MAXRETRY_SHFT 48 /* Maximum retries */ +#define NGP_MAXRETRY_SHFT 48 /* Maximum retries */ #define NGP_MAXRETRY_MASK (UINT64_CAST 0x3ff << 48) -#define NGP_TAILTOWRAP_SHFT 32 /* Tail timeout wrap */ +#define NGP_TAILTOWRAP_SHFT 32 /* Tail timeout wrap */ #define NGP_TAILTOWRAP_MASK (UINT64_CAST 0xffff << 32) -#define NGP_CREDITTOVAL_SHFT 16 /* Tail timeout wrap */ +#define NGP_CREDITTOVAL_SHFT 16 /* Tail timeout wrap */ #define NGP_CREDITTOVAL_MASK (UINT64_CAST 0xf << 16) -#define NGP_TAILTOVAL_SHFT 4 /* Tail timeout value */ +#define NGP_TAILTOVAL_SHFT 4 /* Tail timeout value */ #define NGP_TAILTOVAL_MASK (UINT64_CAST 0xf << 4) /* NI_DIAG_PARMS mask and shift definitions */ #define NDP_PORTTORESET (UINT64_CAST 1 << 18) /* Port tmout reset */ #define NDP_LLP8BITMODE (UINT64_CAST 1 << 12) /* LLP 8-bit mode */ -#define NDP_PORTDISABLE (UINT64_CAST 1 << 6) /* Port disable */ +#define NDP_PORTDISABLE (UINT64_CAST 1 << 6) /* Port disable */ #define NDP_SENDERROR (UINT64_CAST 1) /* Send data error */ /* @@ -137,7 +137,7 @@ #define NVP_PIOID_MASK (UINT64_CAST 0x3ff << 40) #define NVP_WRITEID_SHFT 32 #define NVP_WRITEID_MASK (UINT64_CAST 0xff << 32) -#define NVP_ADDRESS_MASK (UINT64_CAST 0xffff8) /* Bits 19:3 */ +#define NVP_ADDRESS_MASK (UINT64_CAST 0xffff8) /* Bits 19:3 */ #define NVP_TYPE_SHFT 0 #define NVP_TYPE_MASK (UINT64_CAST 0x3) @@ -151,7 +151,7 @@ #define NVS_PIOID_MASK (UINT64_CAST 0x3ff << 40) #define NVS_WRITEID_SHFT 32 #define NVS_WRITEID_MASK (UINT64_CAST 0xff << 32) -#define NVS_ADDRESS_MASK (UINT64_CAST 0xfffffff8) /* Bits 31:3 */ +#define NVS_ADDRESS_MASK (UINT64_CAST 0xfffffff8) /* Bits 31:3 */ #define NVS_TYPE_SHFT 0 #define NVS_TYPE_MASK (UINT64_CAST 0x7) #define NVS_ERROR_MASK (UINT64_CAST 0x4) /* bit set means error */ @@ -161,10 +161,10 @@ #define PIOTYPE_WRITE 1 /* VECTOR_PARMS and VECTOR_STATUS */ #define PIOTYPE_UNDEFINED 2 /* VECTOR_PARMS and VECTOR_STATUS */ #define PIOTYPE_EXCHANGE 3 /* VECTOR_PARMS and VECTOR_STATUS */ -#define PIOTYPE_ADDR_ERR 4 /* VECTOR_STATUS only */ -#define PIOTYPE_CMD_ERR 5 /* VECTOR_STATUS only */ -#define PIOTYPE_PROT_ERR 6 /* VECTOR_STATUS only */ -#define PIOTYPE_UNKNOWN 7 /* VECTOR_STATUS only */ +#define PIOTYPE_ADDR_ERR 4 /* VECTOR_STATUS only */ +#define PIOTYPE_CMD_ERR 5 /* VECTOR_STATUS only */ +#define PIOTYPE_PROT_ERR 6 /* VECTOR_STATUS only */ +#define PIOTYPE_UNKNOWN 7 /* VECTOR_STATUS only */ /* NI_AGE_XXX mask and shift definitions */ @@ -215,7 +215,7 @@ #define NPE_FATAL_ERRORS (NPE_LINKRESET | NPE_INTERNALERROR | \ NPE_BADMESSAGE | NPE_BADDEST | \ - NPE_FIFOOVERFLOW | NPE_CREDITTO_MASK | \ + NPE_FIFOOVERFLOW | NPE_CREDITTO_MASK | \ NPE_TAILTO_MASK) /* NI_META_TABLE mask and shift definitions */ @@ -231,7 +231,7 @@ typedef union hubni_port_error_u { u64 nipe_reg_value; struct { - u64 nipe_rsvd: 26, /* unused */ + u64 nipe_rsvd: 26, /* unused */ nipe_lnk_reset: 1, /* link reset */ nipe_intl_err: 1, /* internal error */ nipe_bad_msg: 1, /* bad message */ diff --git a/arch/mips/include/asm/sn/sn0/hubpi.h b/arch/mips/include/asm/sn/sn0/hubpi.h index e39f5f9da040..7b83655913c5 100644 --- a/arch/mips/include/asm/sn/sn0/hubpi.h +++ b/arch/mips/include/asm/sn/sn0/hubpi.h @@ -8,8 +8,8 @@ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. * Copyright (C) 1999 by Ralf Baechle */ -#ifndef _ASM_SN_SN0_HUBPI_H -#define _ASM_SN_SN0_HUBPI_H +#ifndef _ASM_SN_SN0_HUBPI_H +#define _ASM_SN_SN0_HUBPI_H #include <linux/types.h> @@ -25,13 +25,13 @@ /* General protection and control registers */ -#define PI_CPU_PROTECT 0x000000 /* CPU Protection */ -#define PI_PROT_OVERRD 0x000008 /* Clear CPU Protection bit */ -#define PI_IO_PROTECT 0x000010 /* Interrupt Pending Protection */ +#define PI_CPU_PROTECT 0x000000 /* CPU Protection */ +#define PI_PROT_OVERRD 0x000008 /* Clear CPU Protection bit */ +#define PI_IO_PROTECT 0x000010 /* Interrupt Pending Protection */ #define PI_REGION_PRESENT 0x000018 /* Indicates whether region exists */ -#define PI_CPU_NUM 0x000020 /* CPU Number ID */ -#define PI_CALIAS_SIZE 0x000028 /* Cached Alias Size */ -#define PI_MAX_CRB_TIMEOUT 0x000030 /* Maximum Timeout for CRB */ +#define PI_CPU_NUM 0x000020 /* CPU Number ID */ +#define PI_CALIAS_SIZE 0x000028 /* Cached Alias Size */ +#define PI_MAX_CRB_TIMEOUT 0x000030 /* Maximum Timeout for CRB */ #define PI_CRB_SFACTOR 0x000038 /* Scale factor for CRB timeout */ /* CALIAS values */ @@ -54,28 +54,28 @@ /* Processor control and status checking */ -#define PI_CPU_PRESENT_A 0x000040 /* CPU Present A */ -#define PI_CPU_PRESENT_B 0x000048 /* CPU Present B */ -#define PI_CPU_ENABLE_A 0x000050 /* CPU Enable A */ -#define PI_CPU_ENABLE_B 0x000058 /* CPU Enable B */ -#define PI_REPLY_LEVEL 0x000060 /* Reply Level */ +#define PI_CPU_PRESENT_A 0x000040 /* CPU Present A */ +#define PI_CPU_PRESENT_B 0x000048 /* CPU Present B */ +#define PI_CPU_ENABLE_A 0x000050 /* CPU Enable A */ +#define PI_CPU_ENABLE_B 0x000058 /* CPU Enable B */ +#define PI_REPLY_LEVEL 0x000060 /* Reply Level */ #define PI_HARDRESET_BIT 0x020068 /* Bit cleared by s/w on SR */ -#define PI_NMI_A 0x000070 /* NMI to CPU A */ -#define PI_NMI_B 0x000078 /* NMI to CPU B */ +#define PI_NMI_A 0x000070 /* NMI to CPU A */ +#define PI_NMI_B 0x000078 /* NMI to CPU B */ #define PI_NMI_OFFSET (PI_NMI_B - PI_NMI_A) -#define PI_SOFTRESET 0x000080 /* Softreset (to both CPUs) */ +#define PI_SOFTRESET 0x000080 /* Softreset (to both CPUs) */ -/* Regular Interrupt register checking. */ +/* Regular Interrupt register checking. */ #define PI_INT_PEND_MOD 0x000090 /* Write to set pending ints */ -#define PI_INT_PEND0 0x000098 /* Read to get pending ints */ -#define PI_INT_PEND1 0x0000a0 /* Read to get pending ints */ -#define PI_INT_MASK0_A 0x0000a8 /* Interrupt Mask 0 for CPU A */ -#define PI_INT_MASK1_A 0x0000b0 /* Interrupt Mask 1 for CPU A */ -#define PI_INT_MASK0_B 0x0000b8 /* Interrupt Mask 0 for CPU B */ -#define PI_INT_MASK1_B 0x0000c0 /* Interrupt Mask 1 for CPU B */ +#define PI_INT_PEND0 0x000098 /* Read to get pending ints */ +#define PI_INT_PEND1 0x0000a0 /* Read to get pending ints */ +#define PI_INT_MASK0_A 0x0000a8 /* Interrupt Mask 0 for CPU A */ +#define PI_INT_MASK1_A 0x0000b0 /* Interrupt Mask 1 for CPU A */ +#define PI_INT_MASK0_B 0x0000b8 /* Interrupt Mask 0 for CPU B */ +#define PI_INT_MASK1_B 0x0000c0 /* Interrupt Mask 1 for CPU B */ -#define PI_INT_MASK_OFFSET 0x10 /* Offset from A to B */ +#define PI_INT_MASK_OFFSET 0x10 /* Offset from A to B */ /* Crosscall interrupts */ @@ -83,49 +83,49 @@ #define PI_CC_PEND_SET_B 0x0000d0 /* CC Interrupt Pending Set, CPU B */ #define PI_CC_PEND_CLR_A 0x0000d8 /* CC Interrupt Pending Clr, CPU A */ #define PI_CC_PEND_CLR_B 0x0000e0 /* CC Interrupt Pending Clr, CPU B */ -#define PI_CC_MASK 0x0000e8 /* CC Interrupt mask */ +#define PI_CC_MASK 0x0000e8 /* CC Interrupt mask */ -#define PI_INT_SET_OFFSET 0x08 /* Offset from A to B */ +#define PI_INT_SET_OFFSET 0x08 /* Offset from A to B */ /* Realtime Counter and Profiler control registers */ -#define PI_RT_COUNT 0x030100 /* Real Time Counter */ -#define PI_RT_COMPARE_A 0x000108 /* Real Time Compare A */ -#define PI_RT_COMPARE_B 0x000110 /* Real Time Compare B */ +#define PI_RT_COUNT 0x030100 /* Real Time Counter */ +#define PI_RT_COMPARE_A 0x000108 /* Real Time Compare A */ +#define PI_RT_COMPARE_B 0x000110 /* Real Time Compare B */ #define PI_PROFILE_COMPARE 0x000118 /* L5 int to both cpus when == RTC */ -#define PI_RT_PEND_A 0x000120 /* Set if RT int for A pending */ -#define PI_RT_PEND_B 0x000128 /* Set if RT int for B pending */ +#define PI_RT_PEND_A 0x000120 /* Set if RT int for A pending */ +#define PI_RT_PEND_B 0x000128 /* Set if RT int for B pending */ #define PI_PROF_PEND_A 0x000130 /* Set if Prof int for A pending */ #define PI_PROF_PEND_B 0x000138 /* Set if Prof int for B pending */ -#define PI_RT_EN_A 0x000140 /* RT int for CPU A enable */ -#define PI_RT_EN_B 0x000148 /* RT int for CPU B enable */ -#define PI_PROF_EN_A 0x000150 /* PROF int for CPU A enable */ -#define PI_PROF_EN_B 0x000158 /* PROF int for CPU B enable */ -#define PI_RT_LOCAL_CTRL 0x000160 /* RT control register */ +#define PI_RT_EN_A 0x000140 /* RT int for CPU A enable */ +#define PI_RT_EN_B 0x000148 /* RT int for CPU B enable */ +#define PI_PROF_EN_A 0x000150 /* PROF int for CPU A enable */ +#define PI_PROF_EN_B 0x000158 /* PROF int for CPU B enable */ +#define PI_RT_LOCAL_CTRL 0x000160 /* RT control register */ #define PI_RT_FILTER_CTRL 0x000168 /* GCLK Filter control register */ #define PI_COUNT_OFFSET 0x08 /* A to B offset for all counts */ /* Built-In Self Test support */ -#define PI_BIST_WRITE_DATA 0x000200 /* BIST write data */ -#define PI_BIST_READ_DATA 0x000208 /* BIST read data */ -#define PI_BIST_COUNT_TARG 0x000210 /* BIST Count and Target */ -#define PI_BIST_READY 0x000218 /* BIST Ready indicator */ -#define PI_BIST_SHIFT_LOAD 0x000220 /* BIST control */ -#define PI_BIST_SHIFT_UNLOAD 0x000228 /* BIST control */ -#define PI_BIST_ENTER_RUN 0x000230 /* BIST control */ +#define PI_BIST_WRITE_DATA 0x000200 /* BIST write data */ +#define PI_BIST_READ_DATA 0x000208 /* BIST read data */ +#define PI_BIST_COUNT_TARG 0x000210 /* BIST Count and Target */ +#define PI_BIST_READY 0x000218 /* BIST Ready indicator */ +#define PI_BIST_SHIFT_LOAD 0x000220 /* BIST control */ +#define PI_BIST_SHIFT_UNLOAD 0x000228 /* BIST control */ +#define PI_BIST_ENTER_RUN 0x000230 /* BIST control */ /* Graphics control registers */ -#define PI_GFX_PAGE_A 0x000300 /* Graphics page A */ -#define PI_GFX_CREDIT_CNTR_A 0x000308 /* Graphics credit counter A */ -#define PI_GFX_BIAS_A 0x000310 /* Graphics bias A */ +#define PI_GFX_PAGE_A 0x000300 /* Graphics page A */ +#define PI_GFX_CREDIT_CNTR_A 0x000308 /* Graphics credit counter A */ +#define PI_GFX_BIAS_A 0x000310 /* Graphics bias A */ #define PI_GFX_INT_CNTR_A 0x000318 /* Graphics interrupt counter A */ #define PI_GFX_INT_CMP_A 0x000320 /* Graphics interrupt comparator A */ -#define PI_GFX_PAGE_B 0x000328 /* Graphics page B */ -#define PI_GFX_CREDIT_CNTR_B 0x000330 /* Graphics credit counter B */ -#define PI_GFX_BIAS_B 0x000338 /* Graphics bias B */ +#define PI_GFX_PAGE_B 0x000328 /* Graphics page B */ +#define PI_GFX_CREDIT_CNTR_B 0x000330 /* Graphics credit counter B */ +#define PI_GFX_BIAS_B 0x000338 /* Graphics bias B */ #define PI_GFX_INT_CNTR_B 0x000340 /* Graphics interrupt counter B */ #define PI_GFX_INT_CMP_B 0x000348 /* Graphics interrupt comparator B */ @@ -138,24 +138,24 @@ #define PI_ERR_INT_MASK_B 0x000410 /* Error Interrupt mask for CPU B */ #define PI_ERR_STACK_ADDR_A 0x000418 /* Error stack address for CPU A */ #define PI_ERR_STACK_ADDR_B 0x000420 /* Error stack address for CPU B */ -#define PI_ERR_STACK_SIZE 0x000428 /* Error Stack Size */ -#define PI_ERR_STATUS0_A 0x000430 /* Error Status 0A */ +#define PI_ERR_STACK_SIZE 0x000428 /* Error Stack Size */ +#define PI_ERR_STATUS0_A 0x000430 /* Error Status 0A */ #define PI_ERR_STATUS0_A_RCLR 0x000438 /* Error Status 0A clear on read */ -#define PI_ERR_STATUS1_A 0x000440 /* Error Status 1A */ +#define PI_ERR_STATUS1_A 0x000440 /* Error Status 1A */ #define PI_ERR_STATUS1_A_RCLR 0x000448 /* Error Status 1A clear on read */ -#define PI_ERR_STATUS0_B 0x000450 /* Error Status 0B */ +#define PI_ERR_STATUS0_B 0x000450 /* Error Status 0B */ #define PI_ERR_STATUS0_B_RCLR 0x000458 /* Error Status 0B clear on read */ -#define PI_ERR_STATUS1_B 0x000460 /* Error Status 1B */ +#define PI_ERR_STATUS1_B 0x000460 /* Error Status 1B */ #define PI_ERR_STATUS1_B_RCLR 0x000468 /* Error Status 1B clear on read */ -#define PI_SPOOL_CMP_A 0x000470 /* Spool compare for CPU A */ -#define PI_SPOOL_CMP_B 0x000478 /* Spool compare for CPU B */ -#define PI_CRB_TIMEOUT_A 0x000480 /* Timed out CRB entries for A */ -#define PI_CRB_TIMEOUT_B 0x000488 /* Timed out CRB entries for B */ +#define PI_SPOOL_CMP_A 0x000470 /* Spool compare for CPU A */ +#define PI_SPOOL_CMP_B 0x000478 /* Spool compare for CPU B */ +#define PI_CRB_TIMEOUT_A 0x000480 /* Timed out CRB entries for A */ +#define PI_CRB_TIMEOUT_B 0x000488 /* Timed out CRB entries for B */ #define PI_SYSAD_ERRCHK_EN 0x000490 /* Enables SYSAD error checking */ -#define PI_BAD_CHECK_BIT_A 0x000498 /* Force SYSAD check bit error */ -#define PI_BAD_CHECK_BIT_B 0x0004a0 /* Force SYSAD check bit error */ -#define PI_NACK_CNT_A 0x0004a8 /* Consecutive NACK counter */ -#define PI_NACK_CNT_B 0x0004b0 /* " " for CPU B */ +#define PI_BAD_CHECK_BIT_A 0x000498 /* Force SYSAD check bit error */ +#define PI_BAD_CHECK_BIT_B 0x0004a0 /* Force SYSAD check bit error */ +#define PI_NACK_CNT_A 0x0004a8 /* Consecutive NACK counter */ +#define PI_NACK_CNT_B 0x0004b0 /* " " for CPU B */ #define PI_NACK_CMP 0x0004b8 /* NACK count compare */ #define PI_STACKADDR_OFFSET (PI_ERR_STACK_ADDR_B - PI_ERR_STACK_ADDR_A) #define PI_ERRSTAT_OFFSET (PI_ERR_STATUS0_B - PI_ERR_STATUS0_A) @@ -168,7 +168,7 @@ #define PI_ERR_SPUR_MSG_A 0x00000008 #define PI_ERR_WRB_TERR_B 0x00000010 /* WRB TERR */ #define PI_ERR_WRB_TERR_A 0x00000020 -#define PI_ERR_WRB_WERR_B 0x00000040 /* WRB WERR */ +#define PI_ERR_WRB_WERR_B 0x00000040 /* WRB WERR */ #define PI_ERR_WRB_WERR_A 0x00000080 #define PI_ERR_SYSSTATE_B 0x00000100 /* SysState parity error */ #define PI_ERR_SYSSTATE_A 0x00000200 @@ -196,32 +196,32 @@ * The following three macros define all possible error int pends. */ -#define PI_FATAL_ERR_CPU_A (PI_ERR_SYSSTATE_TAG_A | \ - PI_ERR_BAD_SPOOL_A | \ - PI_ERR_SYSCMD_ADDR_A | \ - PI_ERR_SYSCMD_DATA_A | \ - PI_ERR_SYSAD_ADDR_A | \ +#define PI_FATAL_ERR_CPU_A (PI_ERR_SYSSTATE_TAG_A | \ + PI_ERR_BAD_SPOOL_A | \ + PI_ERR_SYSCMD_ADDR_A | \ + PI_ERR_SYSCMD_DATA_A | \ + PI_ERR_SYSAD_ADDR_A | \ PI_ERR_SYSAD_DATA_A | \ PI_ERR_SYSSTATE_A) -#define PI_MISC_ERR_CPU_A (PI_ERR_UNCAC_UNCORR_A | \ - PI_ERR_WRB_WERR_A | \ - PI_ERR_WRB_TERR_A | \ - PI_ERR_SPUR_MSG_A | \ +#define PI_MISC_ERR_CPU_A (PI_ERR_UNCAC_UNCORR_A | \ + PI_ERR_WRB_WERR_A | \ + PI_ERR_WRB_TERR_A | \ + PI_ERR_SPUR_MSG_A | \ PI_ERR_SPOOL_CMP_A) -#define PI_FATAL_ERR_CPU_B (PI_ERR_SYSSTATE_TAG_B | \ - PI_ERR_BAD_SPOOL_B | \ - PI_ERR_SYSCMD_ADDR_B | \ - PI_ERR_SYSCMD_DATA_B | \ - PI_ERR_SYSAD_ADDR_B | \ +#define PI_FATAL_ERR_CPU_B (PI_ERR_SYSSTATE_TAG_B | \ + PI_ERR_BAD_SPOOL_B | \ + PI_ERR_SYSCMD_ADDR_B | \ + PI_ERR_SYSCMD_DATA_B | \ + PI_ERR_SYSAD_ADDR_B | \ PI_ERR_SYSAD_DATA_B | \ PI_ERR_SYSSTATE_B) -#define PI_MISC_ERR_CPU_B (PI_ERR_UNCAC_UNCORR_B | \ - PI_ERR_WRB_WERR_B | \ - PI_ERR_WRB_TERR_B | \ - PI_ERR_SPUR_MSG_B | \ +#define PI_MISC_ERR_CPU_B (PI_ERR_UNCAC_UNCORR_B | \ + PI_ERR_WRB_WERR_B | \ + PI_ERR_WRB_TERR_B | \ + PI_ERR_SPUR_MSG_B | \ PI_ERR_SPOOL_CMP_B) #define PI_ERR_GENERIC (PI_ERR_MD_UNCORR) @@ -242,24 +242,24 @@ #define PI_ERR_ST0_CMD_SHFT 17 #define PI_ERR_ST0_ADDR_MASK 0x3ffffffffe000000 #define PI_ERR_ST0_ADDR_SHFT 25 -#define PI_ERR_ST0_OVERRUN_MASK 0x4000000000000000 -#define PI_ERR_ST0_OVERRUN_SHFT 62 +#define PI_ERR_ST0_OVERRUN_MASK 0x4000000000000000 +#define PI_ERR_ST0_OVERRUN_SHFT 62 #define PI_ERR_ST0_VALID_MASK 0x8000000000000000 #define PI_ERR_ST0_VALID_SHFT 63 /* Fields in PI_ERR_STATUS1_[AB] */ #define PI_ERR_ST1_SPOOL_MASK 0x00000000001fffff #define PI_ERR_ST1_SPOOL_SHFT 0 -#define PI_ERR_ST1_TOUTCNT_MASK 0x000000001fe00000 -#define PI_ERR_ST1_TOUTCNT_SHFT 21 +#define PI_ERR_ST1_TOUTCNT_MASK 0x000000001fe00000 +#define PI_ERR_ST1_TOUTCNT_SHFT 21 #define PI_ERR_ST1_INVCNT_MASK 0x0000007fe0000000 #define PI_ERR_ST1_INVCNT_SHFT 29 #define PI_ERR_ST1_CRBNUM_MASK 0x0000038000000000 #define PI_ERR_ST1_CRBNUM_SHFT 39 #define PI_ERR_ST1_WRBRRB_MASK 0x0000040000000000 #define PI_ERR_ST1_WRBRRB_SHFT 42 -#define PI_ERR_ST1_CRBSTAT_MASK 0x001ff80000000000 -#define PI_ERR_ST1_CRBSTAT_SHFT 43 +#define PI_ERR_ST1_CRBSTAT_MASK 0x001ff80000000000 +#define PI_ERR_ST1_CRBSTAT_SHFT 43 #define PI_ERR_ST1_MSGSRC_MASK 0xffe0000000000000 #define PI_ERR_ST1_MSGSRC_SHFT 53 @@ -274,8 +274,8 @@ #define PI_ERR_STK_CRBNUM_SHFT 9 #define PI_ERR_STK_WRBRRB_MASK 0x0000000000001000 #define PI_ERR_STK_WRBRRB_SHFT 12 -#define PI_ERR_STK_CRBSTAT_MASK 0x00000000007fe000 -#define PI_ERR_STK_CRBSTAT_SHFT 13 +#define PI_ERR_STK_CRBSTAT_MASK 0x00000000007fe000 +#define PI_ERR_STK_CRBSTAT_SHFT 13 #define PI_ERR_STK_CMD_MASK 0x000000007f800000 #define PI_ERR_STK_CMD_SHFT 23 #define PI_ERR_STK_ADDR_MASK 0xffffffff80000000 @@ -364,11 +364,11 @@ typedef u64 rtc_time_t; /* Bits in PI_SYSAD_ERRCHK_EN */ #define PI_SYSAD_ERRCHK_ECCGEN 0x01 /* Enable ECC generation */ -#define PI_SYSAD_ERRCHK_QUALGEN 0x02 /* Enable data quality signal gen. */ -#define PI_SYSAD_ERRCHK_SADP 0x04 /* Enable SysAD parity checking */ +#define PI_SYSAD_ERRCHK_QUALGEN 0x02 /* Enable data quality signal gen. */ +#define PI_SYSAD_ERRCHK_SADP 0x04 /* Enable SysAD parity checking */ #define PI_SYSAD_ERRCHK_CMDP 0x08 /* Enable SysCmd parity checking */ #define PI_SYSAD_ERRCHK_STATE 0x10 /* Enable SysState parity checking */ -#define PI_SYSAD_ERRCHK_QUAL 0x20 /* Enable data quality checking */ +#define PI_SYSAD_ERRCHK_QUAL 0x20 /* Enable data quality checking */ #define PI_SYSAD_CHECK_ALL 0x3f /* Generate and check all signals. */ /* Interrupt pending bits on R10000 */ diff --git a/arch/mips/include/asm/sn/sn0/ip27.h b/arch/mips/include/asm/sn/sn0/ip27.h index 3c97e0855c8d..3b5efeefcc3f 100644 --- a/arch/mips/include/asm/sn/sn0/ip27.h +++ b/arch/mips/include/asm/sn/sn0/ip27.h @@ -21,14 +21,14 @@ #ifndef __ASSEMBLY__ -#define CAUSE_BERRINTR IE_IRQ5 +#define CAUSE_BERRINTR IE_IRQ5 -#define ECCF_CACHE_ERR 0 -#define ECCF_TAGLO 1 -#define ECCF_ECC 2 -#define ECCF_ERROREPC 3 -#define ECCF_PADDR 4 -#define ECCF_SIZE (5 * sizeof(long)) +#define ECCF_CACHE_ERR 0 +#define ECCF_TAGLO 1 +#define ECCF_ECC 2 +#define ECCF_ERROREPC 3 +#define ECCF_PADDR 4 +#define ECCF_SIZE (5 * sizeof(long)) #endif /* !__ASSEMBLY__ */ @@ -39,8 +39,8 @@ * the processor number of the calling processor. The proc parameters * must be a register. */ -#define KL_GET_CPUNUM(proc) \ - dli proc, LOCAL_HUB(0); \ +#define KL_GET_CPUNUM(proc) \ + dli proc, LOCAL_HUB(0); \ ld proc, PI_CPU_NUM(proc) #endif /* __ASSEMBLY__ */ @@ -71,15 +71,15 @@ #define NUM_CAUSE_INTRS 8 -#define SCACHE_LINESIZE 128 -#define SCACHE_LINEMASK (SCACHE_LINESIZE - 1) +#define SCACHE_LINESIZE 128 +#define SCACHE_LINEMASK (SCACHE_LINESIZE - 1) #include <asm/sn/addrs.h> -#define LED_CYCLE_MASK 0x0f -#define LED_CYCLE_SHFT 4 +#define LED_CYCLE_MASK 0x0f +#define LED_CYCLE_SHFT 4 #define SEND_NMI(_nasid, _slice) \ - REMOTE_HUB_S((_nasid), (PI_NMI_A + ((_slice) * PI_NMI_OFFSET)), 1) + REMOTE_HUB_S((_nasid), (PI_NMI_A + ((_slice) * PI_NMI_OFFSET)), 1) #endif /* _ASM_SN_SN0_IP27_H */ diff --git a/arch/mips/include/asm/sn/types.h b/arch/mips/include/asm/sn/types.h index 74d0bb260b86..c4813d67aec3 100644 --- a/arch/mips/include/asm/sn/types.h +++ b/arch/mips/include/asm/sn/types.h @@ -11,7 +11,7 @@ #include <linux/types.h> -typedef unsigned long cpuid_t; +typedef unsigned long cpuid_t; typedef unsigned long cnodemask_t; typedef signed short nasid_t; /* node id in numa-as-id space */ typedef signed short cnodeid_t; /* node id in compact-id space */ @@ -19,7 +19,7 @@ typedef signed char partid_t; /* partition ID type */ typedef signed short moduleid_t; /* user-visible module number type */ typedef signed short cmoduleid_t; /* kernel compact module id type */ typedef unsigned char clusterid_t; /* Clusterid of the cell */ -typedef unsigned long pfn_t; +typedef unsigned long pfn_t; typedef dev_t vertex_hdl_t; /* hardware graph vertex handle */ |