1 files changed, 0 insertions, 245 deletions
diff --git a/arch/m32r/platforms/mappi/dot.gdbinit.nommu b/arch/m32r/platforms/mappi/dot.gdbinit.nommu
deleted file mode 100644
index 297536cf67cf..000000000000
--- a/arch/m32r/platforms/mappi/dot.gdbinit.nommu
+++ /dev/null
@@ -1,245 +0,0 @@
-# .gdbinit file
-# $Id$
-#-----
-# NOTE: this file is generated by a script, "gen_gdbinit.pl".
-# (Please type "gen_gdbinit.pl --help" and check the help message).
-# $ Id: gen_gdbinit.pl,v 1.5 2004/01/23 08:23:25 takata Exp $
-#-----
-# target platform: mappi
-
-# setting
-set width 0d70
-set radix 0d16
-debug_chaos
-
-# clk xin:cpu:bif:bus=25:200:50:50
-define clock_init
-  set *(unsigned long *)0x00ef4024 = 2
-  set *(unsigned long *)0x00ef4020 = 2
-  set *(unsigned long *)0x00ef4010 = 0
-  set *(unsigned long *)0x00ef4014 = 0
-  set *(unsigned long *)0x00ef4004 = 3
-  shell sleep 0.1
-  set *(unsigned long *)0x00ef4008 = 0x00000200
-end
-
-# Initialize programmable ports
-define port_init
-  set $sfrbase = 0x00ef0000
-  set *(unsigned short *)0x00ef1060 = 0x5555
-  set *(unsigned short *)0x00ef1062 = 0x5555
-  set *(unsigned short *)0x00ef1064 = 0x5555
-  set *(unsigned short *)0x00ef1066 = 0x5555
-  set *(unsigned short *)0x00ef1068 = 0x5555
-  set *(unsigned short *)0x00ef106a = 0x0000
-  set *(unsigned short *)0x00ef106e = 0x5555
-  set *(unsigned short *)0x00ef1070 = 0x5555
-  # LED ON
-  set *(unsigned char *)($sfrbase + 0x1015) = 0xff
-  set *(unsigned char *)($sfrbase + 0x1085) = 0xff
-  shell sleep 0.1
-  # LED OFF
-  set *(unsigned char *)($sfrbase + 0x1085) = 0x00
-end
-document port_init
-  P5=LED(output), P6.b4=LAN_RESET(output)
-end
-
-# Initialize SDRAM controller
-define sdram_init
-  # SDIR0
-  set *(unsigned long *)0x00ef6008 = 0x00000182
-  # SDIR1
-  set *(unsigned long *)0x00ef600c = 0x00000001
-  # Initialize wait
-  shell sleep 0.1
-  # Ch0-MOD
-  set *(unsigned long *)0x00ef602c = 0x00000020
-  # Ch0-TR
-  set *(unsigned long *)0x00ef6028 = 0x00051502
-  # Ch0-ADR (size:64MB)
-  set *(unsigned long *)0x00ef6020 = 0x00000004
-  # AutoRef On
-  set *(unsigned long *)0x00ef6004 = 0x00010f05
-  # Access enable
-  set *(unsigned long *)0x00ef6024 = 0x00000001
-end
-document sdram_init
-  SDRAM controller initialization
-  0x08000000 - 0x0bffffff (64MB)
-end
-
-# Initialize LAN controller
-define lanc_init
-  set $sfrbase = 0x00ef0000
-  # Set BSEL3 (BSEL3 for the Chaos's bselc)
-  set *(unsigned long *)($sfrbase + 0x5300) = 0x07078040
-  set *(unsigned long *)($sfrbase + 0x5304) = 0x01110102
-  set *(unsigned long *)($sfrbase + 0x5308) = 0x00000001
-  # Reset (P5=LED,P6.b4=LAN_RESET)
-  set *(unsigned short *)($sfrbase + 0x106c) = 0x0000
-  set *(unsigned char *)($sfrbase + 0x1016) = 0xff
-  set *(unsigned char *)($sfrbase + 0x1086) = 0xff
-  shell sleep 0.1
-  # swivel: 0=normal, 4=reverse
-#  set *(unsigned char *)($sfrbase + 0x1086) = 0x00
-  set *(unsigned char *)($sfrbase + 0x1086) = 0x04
-  set *(unsigned long *)(0x0c000330) = 0xffffffff
-  # Set mac address
-  set $lanc = (void*)0x0c000300
-  set *(unsigned long *)($lanc + 0x0000) = 0x00610010
-  set *(unsigned long *)($lanc + 0x0004) = 0x00200030
-  set *(unsigned long *)($lanc + 0x0008) = 0x00400050
-  set *(unsigned long *)($lanc + 0x000c) = 0x00600007
-end
-document lanc_init
-  LAN controller initialization
-  ex.) MAC address:  10 20 30 40 50 60
-end
-
-# LCD & CRT dual-head setting (8bpp)
-define dispc_init
-  set $sfrbase = 0x00ef0000
-  # BSEL4 Dispc
-  set *(unsigned long *)($sfrbase + 0x5400) = 0x06078000
-  set *(unsigned long *)($sfrbase + 0x5404) = 0x00101101
-end
-
-# MMU enable
-define mmu_enable
-  set $evb=0x88000000
-  set *(unsigned long *)0xffff0024=1
-end
-
-# MMU disable
-define mmu_disable
-  set $evb=0
-  set *(unsigned long *)0xffff0024=0
-end
-
-# Show TLB entries
-define show_tlb_entries
-  set $i = 0
-  set $addr = $arg0
-  set $nr_entries = $arg1
-  use_mon_code
-  while ($i < $nr_entries)
-    set $tlb_tag = *(unsigned long*)$addr
-    set $tlb_data = *(unsigned long*)($addr + 4)
-    printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
-    set $i = $i + 1
-    set $addr = $addr + 8
-  end
-  use_debug_dma
-end
-define itlb
-  set $itlb=0xfe000000
-  show_tlb_entries $itlb 0d32
-end
-define dtlb
-  set $dtlb=0xfe000800
-  show_tlb_entries $dtlb 0d32
-end
-
-# Show current task structure
-define show_current
-  set $current = $spi & 0xffffe000
-  printf "$current=0x%08lX\n",$current
-  print *(struct task_struct *)$current
-end
-
-# Show user assigned task structure
-define show_task
-  set  = $arg0 & 0xffffe000
-  printf "$task=0x%08lX\n",$task
-  print *(struct task_struct *)$task
-end
-document show_task
-  Show user assigned task structure
-  arg0 : task structure address
-end
-
-# Show M32R registers
-define show_regs
-  printf " R0[0x%08lX]   R1[0x%08lX]   R2[0x%08lX]   R3[0x%08lX]\n",$r0,$r1,$r2,$r3
-  printf " R4[0x%08lX]   R5[0x%08lX]   R6[0x%08lX]   R7[0x%08lX]\n",$r4,$r5,$r6,$r7
-  printf " R8[0x%08lX]   R9[0x%08lX]  R10[0x%08lX]  R11[0x%08lX]\n",$r8,$r9,$r10,$r11
-  printf "R12[0x%08lX]   FP[0x%08lX]   LR[0x%08lX]   SP[0x%08lX]\n",$r12,$fp,$lr,$sp
-  printf "PSW[0x%08lX]  CBR[0x%08lX]  SPI[0x%08lX]  SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
-  printf "BPC[0x%08lX]   PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
-  printf "EVB[0x%08lX]\n",$evb
-end
-
-# Setup all
-define setup
-  use_mon_code
-  set *(unsigned int)0xfffffffc=0x60
-  shell sleep 0.1
-  clock_init
-  shell sleep 0.1
-  port_init
-  sdram_init
-  lanc_init
-  dispc_init
-  set $evb=0x00000000
-end
-
-# Load modules
-define load_modules
-  use_debug_dma
-  load
-end
-
-# Set kernel parameters
-define set_kernel_parameters
-  set $param = (void*)0x00001000
-  # INITRD_START
-  #set *(unsigned long *)($param + 0x0010) = 0x082a0000
-  # INITRD_SIZE
-  #set *(unsigned long *)($param + 0x0014) = 0x00000000
-  # M32R_CPUCLK
-  set *(unsigned long *)($param + 0x0018) = 0d200000000
-  # M32R_BUSCLK
-  set *(unsigned long *)($param + 0x001c) = 0d50000000
-
-  # M32R_TIMER_DIVIDE
-  set *(unsigned long *)($param + 0x0020) = 0d128
-
-  set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/root.bbox-httpd nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 \0"
-end
-
-# Boot
-define boot
-  set_kernel_parameters
-  set $fp = 0
-  set $pc=0x00002000
-  set *(long *)0xfffffff4=0x8080
-#  b load_flat_binary
-#  set *(unsigned char *)0x08001003=0x63
-#  set *(unsigned char *)0x08001003=0x02
-  si
-#  c
-end
-
-# Set breakpoints
-define set_breakpoints
-  b *0x08000030
-end
-
-# Restart
-define restart
-  sdireset
-  sdireset
-  setup
-  load_modules
-  boot
-end
-
-sdireset
-sdireset
-file vmlinux
-target m32rsdi
-setup
-load_modules
-boot
-