5 files changed, 0 insertions, 244 deletions
diff --git a/arch/cris/boot/dts/Makefile b/arch/cris/boot/dts/Makefile
deleted file mode 100644
index 118fe990a173..000000000000
--- a/arch/cris/boot/dts/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_BUILTIN_DTB)).dtb.o
-ifneq ($(CONFIG_BUILTIN_DTB),"")
-obj-$(CONFIG_OF) += $(BUILTIN_DTB)
-endif
diff --git a/arch/cris/boot/dts/artpec3.dtsi b/arch/cris/boot/dts/artpec3.dtsi
deleted file mode 100644
index f857300f4edd..000000000000
--- a/arch/cris/boot/dts/artpec3.dtsi
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "axis,crisv32";
-			reg = <0>;
-		};
-	};
-
-	soc {
-		compatible = "simple-bus";
-		model = "artpec3";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		intc: interrupt-controller {
-			compatible = "axis,crisv32-intc";
-			reg = <0xb002a000 0x1000>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		gio: gpio@b0020000 {
-			compatible = "axis,artpec3-gio";
-			reg = <0xb0020000 0x1000>;
-			interrupts = <61>;
-			gpio-controller;
-			#gpio-cells = <3>;
-		};
-
-		serial@b003e000 {
-			compatible = "axis,etraxfs-uart";
-			reg = <0xb003e000 0x1000>;
-			interrupts = <64>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/cris/boot/dts/dev88.dts b/arch/cris/boot/dts/dev88.dts
deleted file mode 100644
index 415270ea5309..000000000000
--- a/arch/cris/boot/dts/dev88.dts
+++ /dev/null
@@ -1,68 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-/include/ "etraxfs.dtsi"
-
-/ {
-	model = "Axis 88 Developer Board";
-	compatible = "axis,dev88";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	soc {
-		uart0: serial@b00260000 {
-			status = "okay";
-		};
-	};
-
-	spi {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-sck = <&gio 1 0 0xd>;
-		gpio-miso = <&gio 4 0 0xd>;
-		gpio-mosi = <&gio 0 0 0xd>;
-		cs-gpios = <&gio 3 0 0xd>;
-		num-chipselects = <1>;
-
-		temp-sensor@0 {
-			compatible = "ti,lm70";
-			reg = <0>;
-
-			spi-max-frequency = <100000>;
-		};
-	};
-
-	i2c {
-		compatible = "i2c-gpio";
-		gpios = <&gio 5 0 0xd>, <&gio 6 0 0xd>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rtc@51 {
-			compatible = "nxp,pcf8563";
-			reg = <0x51>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		network {
-			label = "network";
-			gpios = <&gio 2 GPIO_ACTIVE_LOW 0xa>;
-		};
-
-		status {
-			label = "status";
-			gpios = <&gio 3 GPIO_ACTIVE_LOW 0xa>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/cris/boot/dts/etraxfs.dtsi b/arch/cris/boot/dts/etraxfs.dtsi
deleted file mode 100644
index 4513edf72545..000000000000
--- a/arch/cris/boot/dts/etraxfs.dtsi
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "axis,crisv32";
-			reg = <0>;
-		};
-	};
-
-	soc {
-		compatible = "simple-bus";
-		model = "etraxfs";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		intc: interrupt-controller {
-			compatible = "axis,crisv32-intc";
-			reg = <0xb001c000 0x1000>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		gio: gpio@b001a000 {
-			compatible = "axis,etraxfs-gio";
-			reg = <0xb001a000 0x1000>;
-			interrupts = <50>;
-			gpio-controller;
-			#gpio-cells = <3>;
-		};
-
-		serial@b00260000 {
-			compatible = "axis,etraxfs-uart";
-			reg = <0xb0026000 0x1000>;
-			interrupts = <68>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/cris/boot/dts/p1343.dts b/arch/cris/boot/dts/p1343.dts
deleted file mode 100644
index 6030561d4574..000000000000
--- a/arch/cris/boot/dts/p1343.dts
+++ /dev/null
@@ -1,77 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/include/ "artpec3.dtsi"
-
-/ {
-	model = "Axis P1343 Network Camera";
-	compatible = "axis,p1343";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	soc {
-		uart0: serial@b003e000 {
-			status = "okay";
-		};
-	};
-
-	i2c {
-		compatible = "i2c-gpio";
-		gpios = <&gio 3 0 0xa>, <&gio 2 0 0xa>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rtc@51 {
-			compatible = "nxp,pcf8563";
-			reg = <0x51>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		status_green {
-			label = "status:green";
-			gpios = <&gio 0 GPIO_ACTIVE_LOW 0xc>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		status_red {
-			label = "status:red";
-			gpios = <&gio 1 GPIO_ACTIVE_LOW 0xc>;
-		};
-
-		network_green {
-			label = "network:green";
-			gpios = <&gio 2 GPIO_ACTIVE_LOW 0xc>;
-		};
-
-		network_red {
-			label = "network:red";
-			gpios = <&gio 3 GPIO_ACTIVE_LOW 0xc>;
-		};
-
-		power_red {
-			label = "power:red";
-			gpios = <&gio 4 GPIO_ACTIVE_LOW 0xc>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		activity-button@0 {
-			label = "Activity Button";
-			linux,code = <KEY_FN>;
-			gpios = <&gio 13 GPIO_ACTIVE_LOW 0xd>;
-		};
-	};
-};