1 files changed, 0 insertions, 122 deletions

diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 09b07d252892..1cba9273d2cb 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -28,54 +28,6 @@
 #include <plat/menelaus.h>
 #include <plat/omap44xx.h>
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
-	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-
-#define OMAP_MMC_NR_RES		2
-
-/*
- * Register MMC devices. Called from mach-omap1 and mach-omap2 device init.
- */
-int __init omap_mmc_add(const char *name, int id, unsigned long base,
-				unsigned long size, unsigned int irq,
-				struct omap_mmc_platform_data *data)
-{
-	struct platform_device *pdev;
-	struct resource res[OMAP_MMC_NR_RES];
-	int ret;
-
-	pdev = platform_device_alloc(name, id);
-	if (!pdev)
-		return -ENOMEM;
-
-	memset(res, 0, OMAP_MMC_NR_RES * sizeof(struct resource));
-	res[0].start = base;
-	res[0].end = base + size - 1;
-	res[0].flags = IORESOURCE_MEM;
-	res[1].start = res[1].end = irq;
-	res[1].flags = IORESOURCE_IRQ;
-
-	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
-	if (ret == 0)
-		ret = platform_device_add_data(pdev, data, sizeof(*data));
-	if (ret)
-		goto fail;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-		goto fail;
-
-	/* return device handle to board setup code */
-	data->dev = &pdev->dev;
-	return 0;
-
-fail:
-	platform_device_put(pdev);
-	return ret;
-}
-
-#endif
-
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
@@ -109,79 +61,6 @@ static void omap_init_rng(void)
 static inline void omap_init_rng(void) {}
 #endif
 
-/*-------------------------------------------------------------------------*/
-
-/* Numbering for the SPI-capable controllers when used for SPI:
- * spi		= 1
- * uwire	= 2
- * mmc1..2	= 3..4
- * mcbsp1..3	= 5..7
- */
-
-#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE)
-
-#define	OMAP_UWIRE_BASE		0xfffb3000
-
-static struct resource uwire_resources[] = {
-	{
-		.start		= OMAP_UWIRE_BASE,
-		.end		= OMAP_UWIRE_BASE + 0x20,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device omap_uwire_device = {
-	.name	   = "omap_uwire",
-	.id	     = -1,
-	.num_resources	= ARRAY_SIZE(uwire_resources),
-	.resource	= uwire_resources,
-};
-
-static void omap_init_uwire(void)
-{
-	/* FIXME define and use a boot tag; not all boards will be hooking
-	 * up devices to the microwire controller, and multi-board configs
-	 * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway...
-	 */
-
-	/* board-specific code must configure chipselects (only a few
-	 * are normally used) and SCLK/SDI/SDO (each has two choices).
-	 */
-	(void) platform_device_register(&omap_uwire_device);
-}
-#else
-static inline void omap_init_uwire(void) {}
-#endif
-
-#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
-
-static phys_addr_t omap_dsp_phys_mempool_base;
-
-void __init omap_dsp_reserve_sdram_memblock(void)
-{
-	phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
-	phys_addr_t paddr;
-
-	if (!size)
-		return;
-
-	paddr = arm_memblock_steal(size, SZ_1M);
-	if (!paddr) {
-		pr_err("%s: failed to reserve %llx bytes\n",
-				__func__, (unsigned long long)size);
-		return;
-	}
-
-	omap_dsp_phys_mempool_base = paddr;
-}
-
-phys_addr_t omap_dsp_get_mempool_base(void)
-{
-	return omap_dsp_phys_mempool_base;
-}
-EXPORT_SYMBOL(omap_dsp_get_mempool_base);
-#endif
-
 /*
  * This gets called after board-specific INIT_MACHINE, and initializes most
  * on-chip peripherals accessible on this board (except for few like USB):
@@ -208,7 +87,6 @@ static int __init omap_init_devices(void)
 	 * in alphabetical order so they're easier to sort through.
 	 */
 	omap_init_rng();
-	omap_init_uwire();
 	return 0;
 }
 arch_initcall(omap_init_devices);