diff options
Diffstat (limited to 'arch/arm/boot/dts/at91-sama5d27_som1_ek.dts')
| -rw-r--r-- | arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 19 |
1 files changed, 11 insertions, 8 deletions
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index 9c9088c99cc4..60cb084a8d92 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -67,7 +67,10 @@ usb1: ohci@00400000 { num-ports = <3>; - atmel,vbus-gpio = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>; + atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */ + &pioA PIN_PA27 GPIO_ACTIVE_HIGH + 0 + >; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb_default>; status = "okay"; @@ -120,7 +123,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mikrobus2_uart>; atmel,use-dma-rx; - atmel-use-dma-tx; + atmel,use-dma-tx; status = "okay"; }; @@ -178,7 +181,7 @@ uart4: serial@fc00c000 { atmel,use-dma-rx; atmel,use-dma-tx; - pinctrl-name = "default"; + pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mikrobus1_uart>; status = "okay"; }; @@ -330,7 +333,7 @@ }; pinctrl_led_gpio_default: led_gpio_default { - pinmux = <PIN_PA27__GPIO>, + pinmux = <PIN_PA10__GPIO>, <PIN_PB1__GPIO>, <PIN_PA31__GPIO>; bias-pull-up; @@ -396,7 +399,7 @@ }; pinctrl_usb_default: usb_default { - pinmux = <PIN_PA10__GPIO>, + pinmux = <PIN_PA27__GPIO>, <PIN_PD19__GPIO>; bias-disable; }; @@ -520,17 +523,17 @@ red { label = "red"; - gpios = <&pioA PIN_PA27 GPIO_ACTIVE_LOW>; + gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>; }; green { label = "green"; - gpios = <&pioA PIN_PB1 GPIO_ACTIVE_LOW>; + gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>; }; blue { label = "blue"; - gpios = <&pioA PIN_PA31 GPIO_ACTIVE_LOW>; + gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; |