diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/wireless')
7 files changed, 54 insertions, 55 deletions
diff --git a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.yaml b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.yaml index 5557676e9d4b..0ea84d6fe73e 100644 --- a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.yaml +++ b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.yaml @@ -29,15 +29,15 @@ additionalProperties: false examples: - | - mmc { - #address-cells = <1>; - #size-cells = <0>; - - wifi@1 { - compatible = "esp,esp8089"; - reg = <1>; - esp,crystal-26M-en = <2>; - }; - }; + mmc { + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "esp,esp8089"; + reg = <1>; + esp,crystal-26M-en = <2>; + }; + }; ... diff --git a/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml b/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml index e68ed9423150..d89f7a3f88a7 100644 --- a/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml +++ b/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml @@ -1,6 +1,5 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. - %YAML 1.2 --- $id: http://devicetree.org/schemas/net/wireless/ieee80211.yaml# diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt index 9bf9bbac16e2..cdc303caf5f4 100644 --- a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt +++ b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt @@ -1,4 +1,4 @@ -Marvell 8787/8897/8997 (sd8787/sd8897/sd8997/pcie8997) SDIO/PCIE devices +Marvell 8787/8897/8978/8997 (sd8787/sd8897/sd8978/sd8997/pcie8997) SDIO/PCIE devices ------ This node provides properties for controlling the Marvell SDIO/PCIE wireless device. @@ -10,7 +10,9 @@ Required properties: - compatible : should be one of the following: * "marvell,sd8787" * "marvell,sd8897" + * "marvell,sd8978" * "marvell,sd8997" + * "nxp,iw416" * "pci11ab,2b42" * "pci1b4b,2b42" diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml index f0c78f994491..7d526ff53fb7 100644 --- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml +++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml @@ -1,6 +1,5 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. - %YAML 1.2 --- $id: http://devicetree.org/schemas/net/wireless/mediatek,mt76.yaml# diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml index 556eb523606a..7d5f982a3d09 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml @@ -1,6 +1,5 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. - %YAML 1.2 --- $id: http://devicetree.org/schemas/net/wireless/qcom,ath11k.yaml# @@ -21,6 +20,7 @@ properties: - qcom,ipq8074-wifi - qcom,ipq6018-wifi - qcom,wcn6750-wifi + - qcom,ipq5018-wifi reg: maxItems: 1 @@ -262,10 +262,10 @@ allOf: examples: - | - q6v5_wcss: q6v5_wcss@CD00000 { + q6v5_wcss: remoteproc@cd00000 { compatible = "qcom,ipq8074-wcss-pil"; - reg = <0xCD00000 0x4040>, - <0x4AB000 0x20>; + reg = <0xcd00000 0x4040>, + <0x4ab000 0x20>; reg-names = "qdsp6", "rmb"; }; @@ -386,7 +386,7 @@ examples: #address-cells = <2>; #size-cells = <2>; - qcn9074_0: qcn9074_0@51100000 { + qcn9074_0: wifi@51100000 { no-map; reg = <0x0 0x51100000 0x0 0x03500000>; }; @@ -463,6 +463,6 @@ examples: qcom,smem-states = <&wlan_smp2p_out 0>; qcom,smem-state-names = "wlan-smp2p-out"; wifi-firmware { - iommus = <&apps_smmu 0x1c02 0x1>; + iommus = <&apps_smmu 0x1c02 0x1>; }; }; diff --git a/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml index 583db5d42226..84e5659e50ef 100644 --- a/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml +++ b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml @@ -2,7 +2,6 @@ # Copyright (c) 2020, Silicon Laboratories, Inc. %YAML 1.2 --- - $id: http://devicetree.org/schemas/net/wireless/silabs,wfx.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml index e31456730e9f..f799a1e52173 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml @@ -90,47 +90,47 @@ examples: // For wl12xx family: spi1 { - #address-cells = <1>; - #size-cells = <0>; - - wlcore1: wlcore@1 { - compatible = "ti,wl1271"; - reg = <1>; - spi-max-frequency = <48000000>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; - vwlan-supply = <&vwlan_fixed>; - clock-xtal; - ref-clock-frequency = <38400000>; - }; + #address-cells = <1>; + #size-cells = <0>; + + wlcore1: wlcore@1 { + compatible = "ti,wl1271"; + reg = <1>; + spi-max-frequency = <48000000>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + vwlan-supply = <&vwlan_fixed>; + clock-xtal; + ref-clock-frequency = <38400000>; + }; }; // For wl18xx family: spi2 { - #address-cells = <1>; - #size-cells = <0>; - - wlcore2: wlcore@0 { - compatible = "ti,wl1835"; - reg = <0>; - spi-max-frequency = <48000000>; - interrupts = <27 IRQ_TYPE_EDGE_RISING>; - vwlan-supply = <&vwlan_fixed>; - }; + #address-cells = <1>; + #size-cells = <0>; + + wlcore2: wlcore@0 { + compatible = "ti,wl1835"; + reg = <0>; + spi-max-frequency = <48000000>; + interrupts = <27 IRQ_TYPE_EDGE_RISING>; + vwlan-supply = <&vwlan_fixed>; + }; }; // SDIO example: mmc3 { - vmmc-supply = <&wlan_en_reg>; - bus-width = <4>; - cap-power-off-card; - keep-power-in-suspend; - - #address-cells = <1>; - #size-cells = <0>; - - wlcore3: wlcore@2 { - compatible = "ti,wl1835"; - reg = <2>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; - }; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + + wlcore3: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; + }; }; |