diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml | 500 |
1 files changed, 500 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml new file mode 100644 index 000000000000..623a4b5cd27a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml @@ -0,0 +1,500 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/stericsson,ab8500.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST-Ericsson Analog Baseband AB8500 and AB8505 + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: + the AB8500 "Analog Baseband" is the mixed-signals integrated circuit + handling power management (regulators), analog-to-digital conversion + (ADC), battery charging, fuel gauging of the battery, battery-backed + RTC, PWM, USB PHY and some GPIO lines in the ST-Ericsson U8500 platforms + in connection with the DB8500 digital baseband. The DB8500 PRCMU + communicates directly and autonomously with the AB8500 and thus it + appears as a subnode of the DB8500 PRCMU. An altered version called + AB8505 also exist, the difference in AB8505 is that some of the USB and + USB charging handling has changed, and it has an embedded USB-to-serial + converter. Most subblocks takes their interrupts directly from the + AB8500 embedded interrupt controller. + +properties: + $nodename: + pattern: '^ab850[05]$' + + compatible: + enum: + - stericsson,ab8500 + - stericsson,ab8505 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + # Some subnodes use a reg, some don't. Those that do use a single cell. + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + clock-controller: + description: Node describing the AB8500 clock controller. This + provides the reference clock for the entire U8500 system and + the DB8500 counterpart. + type: object + + properties: + compatible: + const: stericsson,ab8500-clk + + '#clock-cells': + const: 1 + + gpio: + description: Node describing the AB8500 GPIO controller. A few + GPIO pins available for misc usage. + type: object + + properties: + compatible: + enum: + - stericsson,ab8500-gpio + - stericsson,ab8505-gpio + + gpio-controller: true + + '#gpio-cells': + const: 2 + + rtc: + description: Node describing the AB8500 battery-backed RTC. + type: object + + properties: + compatible: + const: stericsson,ab8500-rtc + + interrupts: + items: + - description: 60 second interval alarm interrupt + - description: RTC alarm + + interrupt-names: + items: + - const: 60S + - const: ALARM + + adc: + description: Node describing the AB8500 general purpose analog to digital + converter, GPADC. + type: object + + properties: + compatible: + const: stericsson,ab8500-gpadc + + # AB8505 only supports one (software) EOC interrupt + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: true + + vddadc-supply: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#io-channel-cells': + const: 1 + + patternProperties: + "^channel@[0-9a-f]+$": + type: object + $ref: ../iio/adc/adc.yaml# + description: Represents each of the external channels which are + connected to the ADC. + + properties: + reg: + items: + minimum: 1 + maximum: 31 + + required: + - reg + + additionalProperties: false + + required: + - compatible + - interrupts + - interrupt-names + - vddadc-supply + - '#address-cells' + - '#size-cells' + - '#io-channel-cells' + + additionalProperties: false + + thermal: + description: Node describing the AB8500 thermal control block. All this block + really does is to fire an interrupt when the die becomes 130 degrees Celsius + in temperature. + type: object + + properties: + compatible: + const: stericsson,abx500-temp + + interrupts: + items: + - description: Thermal warm warning interrupt + + interrupt-names: + items: + - const: ABX500_TEMP_WARM + + required: + - compatible + - interrupts + - interrupt-names + + additionalProperties: false + + ab8500_fg: + description: Node describing the AB8500 fuel gauge control block. + type: object + $ref: ../power/supply/stericsson,ab8500-fg.yaml + + ab8500_btemp: + description: Node describing the AB8500 battery temperature control block. + type: object + $ref: ../power/supply/stericsson,ab8500-btemp.yaml + + ab8500_charger: + description: Node describing the AB8500 battery charger control block. + type: object + $ref: ../power/supply/stericsson,ab8500-charger.yaml + + ab8500_chargalg: + description: Node describing the AB8500 battery charger algorithm. + type: object + $ref: ../power/supply/stericsson,ab8500-chargalg.yaml + + phy: + description: Node describing the AB8500 USB PHY control block. + type: object + + properties: + compatible: + const: stericsson,ab8500-usb + + interrupts: + items: + - description: ID wakeup rising IRQ + - description: ID wakeup falling IRQ + - description: VBUS detection falling IRQ + - description: VBUS detection rising IRQ + - description: USB link status change IRQ + - description: ADP probe plug IRQ + - description: ADP probe unplug IRQ + + interrupt-names: + items: + - const: ID_WAKEUP_R + - const: ID_WAKEUP_F + - const: VBUS_DET_F + - const: VBUS_DET_R + - const: USB_LINK_STATUS + - const: USB_ADP_PROBE_PLUG + - const: USB_ADP_PROBE_UNPLUG + + vddulpivio18-supply: true + v-ape-supply: true + musb_1v8-supply: true + + clocks: + items: + - description: PRCMY system clock + + clock-names: + items: + - const: sysclk + + '#phy-cells': + const: 0 + + required: + - compatible + - interrupts + - interrupt-names + - vddulpivio18-supply + - v-ape-supply + - musb_1v8-supply + - clocks + - clock-names + - '#phy-cells' + + additionalProperties: false + + key: + description: Node describing the AB8500 power-on key control block. + type: object + + properties: + compatible: + const: stericsson,ab8500-poweron-key + + interrupts: + items: + - description: ON key falling IRQ + - description: ON key rising IRQ + + interrupt-names: + items: + - const: ONKEY_DBF + - const: ONKEY_DBR + + required: + - compatible + - interrupts + - interrupt-names + + additionalProperties: false + + ab8500-sysctrl: + description: Node describing the AB8500 system control block. + type: object + + properties: + compatible: + const: stericsson,ab8500-sysctrl + + required: + - compatible + + additionalProperties: false + + codec: + description: Node describing the AB8500 audio codec block. + type: object + + properties: + compatible: + const: stericsson,ab8500-codec + + V-AUD-supply: true + V-AMIC1-supply: true + V-AMIC2-supply: true + V-DMIC-supply: true + + clocks: + items: + - description: Audio system clock + + clock-names: + items: + - const: audioclk + + stericsson,earpeice-cmv: + description: Earpeice voltage + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 950, 1100, 1270, 1580 ] + + required: + - compatible + + additionalProperties: false + + regulator: + description: Node describing the AB8500 internal regulators. + type: object + + properties: + compatible: + enum: + - stericsson,ab8500-regulator + - stericsson,ab8505-regulator + + vin-supply: + description: The regulator supplying all of the internal regulators + with power. + + ab8500_ldo_aux1: + description: The voltage for the auxilary LDO regulator 1 + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_aux2: + description: The voltage for the auxilary LDO regulator 2 + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_aux3: + description: The voltage for the auxilary LDO regulator 3 + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_aux4: + description: The voltage for the auxilary LDO regulator 4 + only present on AB8505 + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_aux5: + description: The voltage for the auxilary LDO regulator 5 + only present on AB8505 + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_aux6: + description: The voltage for the auxilary LDO regulator 6 + only present on AB8505 + type: object + $ref: ../regulator/regulator.yaml# + + # There is never any AUX7 regulator which is confusing + + ab8500_ldo_aux8: + description: The voltage for the auxilary LDO regulator 8 + only present on AB8505 + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_intcore: + description: The LDO regulator for the internal core voltage + of the AB8500 + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_adc: + description: Analog power regulator for the analog to digital converter + ADC, only present on AB8505 + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_tvout: + description: The voltage for the TV output regulator, incidentally + this voltage is also used for other purposes such as measuring + the temperature of the NTC thermistor on the battery. + Only present on AB8500. + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_audio: + description: The LDO regulator for the audio codec output + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_anamic1: + description: The LDO regulator for the analog microphone 1 + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_anamic2: + description: The LDO regulator for the analog microphone 2 + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_dmic: + description: The LDO regulator for the digital microphone + only present on AB8500 + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_ana: + description: Analog power regulator for CSI and DSI interfaces, + Camera Serial Interface CSI and Display Serial Interface DSI. + type: object + $ref: ../regulator/regulator.yaml# + + required: + - compatible + + additionalProperties: false + + + regulator-external: + description: Node describing the AB8500 external regulators. This + concerns the autonomous regulators VSMPS1, VSMPS2 and VSMPS3 + that are normally controlled by external electronics but also + sometimes need to be explicitly controlled by software. + type: object + + properties: + compatible: + const: stericsson,ab8500-ext-regulator + + ab8500_ext1: + description: The voltage for the VSMPS1 external regulator + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ext2: + description: The voltage for the VSMPS2 external regulator + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ext3: + description: The voltage for the VSMPS3 external regulator + type: object + $ref: ../regulator/regulator.yaml# + + required: + - compatible + + additionalProperties: false + +patternProperties: + "^pwm@[1-9]+?$": + type: object + $ref: ../pwm/pwm.yaml# + description: Represents each of the PWM blocks in the AB8500 + + properties: + compatible: + const: stericsson,ab8500-pwm + + reg: true + + clocks: + items: + - description: internal clock + + clock-names: + items: + - const: intclk + + required: + - compatible + - reg + +required: + - compatible + - clock-controller + - gpio + - rtc + - adc + - thermal + - ab8500_fg + - ab8500_btemp + - ab8500_charger + - ab8500_chargalg + - phy + - key + - regulator + +additionalProperties: false |