diff options
267 files changed, 11013 insertions, 10981 deletions
@@ -3475,6 +3475,11 @@ D: several improvements to system programs S: Oldenburg S: Germany +N: Mathieu Poirier +E: mathieu.poirier@linaro.org +D: CoreSight kernel subsystem, Maintainer 2014-2022 +D: Perf tool support for CoreSight + N: Robert Schwebel E: robert@schwebel.de W: https://www.schwebel.de diff --git a/Documentation/ABI/testing/sysfs-bus-cdx b/Documentation/ABI/testing/sysfs-bus-cdx new file mode 100644 index 000000000000..7af477f49998 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-cdx @@ -0,0 +1,56 @@ +What: /sys/bus/cdx/rescan +Date: March 2023 +Contact: nipun.gupta@amd.com +Description: + Writing y/1/on to this file will cause rescan of the bus + and devices on the CDX bus. Any new devices are scanned and + added to the list of Linux devices and any devices removed are + also deleted from Linux. + + For example:: + + # echo 1 > /sys/bus/cdx/rescan + +What: /sys/bus/cdx/devices/.../vendor +Date: March 2023 +Contact: nipun.gupta@amd.com +Description: + Vendor ID for this CDX device, in hexadecimal. Vendor ID is + 16 bit identifier which is specific to the device manufacturer. + Combination of Vendor ID and Device ID identifies a device. + +What: /sys/bus/cdx/devices/.../device +Date: March 2023 +Contact: nipun.gupta@amd.com +Description: + Device ID for this CDX device, in hexadecimal. Device ID is + 16 bit identifier to identify a device type within the range + of a device manufacturer. + Combination of Vendor ID and Device ID identifies a device. + +What: /sys/bus/cdx/devices/.../reset +Date: March 2023 +Contact: nipun.gupta@amd.com +Description: + Writing y/1/on to this file resets the CDX device. + On resetting the device, the corresponding driver is notified + twice, once before the device is being reset, and again after + the reset has been complete. + + For example:: + + # echo 1 > /sys/bus/cdx/.../reset + +What: /sys/bus/cdx/devices/.../remove +Date: March 2023 +Contact: tarak.reddy@amd.com +Description: + Writing y/1/on to this file removes the corresponding + device from the CDX bus. If the device is to be reconfigured + reconfigured in the Hardware, the device can be removed, so + that the device driver does not access the device while it is + being reconfigured. + + For example:: + + # echo 1 > /sys/bus/cdx/devices/.../remove diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 6ba34c0d9789..7140e8e7313f 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -1807,8 +1807,8 @@ What: /sys/bus/iio/devices/iio:deviceX/out_resistanceX_raw KernelVersion: 4.3 Contact: linux-iio@vger.kernel.org Description: - Raw (unscaled no offset etc.) resistance reading that can be processed - into an ohm value. + Raw (unscaled no offset etc.) resistance reading. + Units after application of scale and offset are ohms. What: /sys/bus/iio/devices/iio:deviceX/heater_enable KernelVersion: 4.1.0 @@ -1894,8 +1894,9 @@ What: /sys/bus/iio/devices/iio:deviceX/in_electricalconductivity_raw KernelVersion: 4.8 Contact: linux-iio@vger.kernel.org Description: - Raw (unscaled no offset etc.) electric conductivity reading that - can be processed to siemens per meter. + Raw (unscaled no offset etc.) electric conductivity reading. + Units after application of scale and offset are siemens per + meter. What: /sys/bus/iio/devices/iio:deviceX/in_countY_raw KernelVersion: 4.10 @@ -1951,8 +1952,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_phaseY_raw KernelVersion: 4.18 Contact: linux-iio@vger.kernel.org Description: - Raw (unscaled) phase difference reading from channel Y - that can be processed to radians. + Raw (unscaled) phase difference reading from channel Y. + Units after application of scale and offset are radians. What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm1_input What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm1_input diff --git a/Documentation/ABI/testing/sysfs-bus-platform-devices-ampere-smpro b/Documentation/ABI/testing/sysfs-bus-platform-devices-ampere-smpro index ca93c215ef99..fead760dcf77 100644 --- a/Documentation/ABI/testing/sysfs-bus-platform-devices-ampere-smpro +++ b/Documentation/ABI/testing/sysfs-bus-platform-devices-ampere-smpro @@ -234,8 +234,8 @@ Description: For details, see section `5.10 RAS Internal Error Register Definitions, Altra Family Soc BMC Interface Specification`. -What: /sys/bus/platform/devices/smpro-errmon.*/event_[vrd_warn_fault|vrd_hot|dimm_hot] -KernelVersion: 6.1 +What: /sys/bus/platform/devices/smpro-errmon.*/event_[vrd_warn_fault|vrd_hot|dimm_hot|dimm_2x_refresh] +KernelVersion: 6.1 (event_[vrd_warn_fault|vrd_hot|dimm_hot]), 6.4 (event_dimm_2x_refresh) Contact: Quan Nguyen <quan@os.amperecomputing.com> Description: (RO) Contains the detail information in case of VRD/DIMM warning/hot events @@ -258,8 +258,21 @@ Description: +---------------+---------------------------------------------------------------+---------------------+ | DIMM HOT | /sys/bus/platform/devices/smpro-errmon.*/event_dimm_hot | DIMM Hot | +---------------+---------------------------------------------------------------+---------------------+ + | DIMM 2X | /sys/bus/platform/devices/smpro-errmon.*/event_dimm_2x_refresh| DIMM 2x refresh rate| + | REFRESH RATE | | event in high temp | + +---------------+---------------------------------------------------------------+---------------------+ + + For more details, see section `5.7 GPI Status Registers and 5.9 Memory Error Register Definitions, + Altra Family Soc BMC Interface Specification`. + +What: /sys/bus/platform/devices/smpro-errmon.*/event_dimm[0-15]_syndrome +KernelVersion: 6.4 +Contact: Quan Nguyen <quan@os.amperecomputing.com> +Description: + (RO) The sysfs returns the 2-byte DIMM failure syndrome data for slot + 0-15 if it failed to initialize. - For more details, see section `5.7 GPI Status Registers, + For more details, see section `5.11 Boot Stage Register Definitions, Altra Family Soc BMC Interface Specification`. What: /sys/bus/platform/devices/smpro-misc.*/boot_progress diff --git a/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga b/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga new file mode 100644 index 000000000000..8f93d27b6d91 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga @@ -0,0 +1,73 @@ +What: /sys/bus/platform/drivers/zynqmp_fpga_manager/firmware:zynqmp-firmware:pcap/status +Date: February 2023 +KernelVersion: 6.4 +Contact: Nava kishore Manne <nava.kishore.manne@amd.com> +Description: (RO) Read fpga status. + Read returns a hexadecimal value that tells the current status + of the FPGA device. Each bit position in the status value is + described Below(see ug570 chapter 9). + https://docs.xilinx.com/v/u/en-US/ug570-ultrascale-configuration + + ====================== ============================================== + BIT(0) 0: No CRC error + 1: CRC error + + BIT(1) 0: Decryptor security not set + 1: Decryptor security set + + BIT(2) 0: MMCMs/PLLs are not locked + 1: MMCMs/PLLs are locked + + BIT(3) 0: DCI not matched + 1: DCI matched + + BIT(4) 0: Start-up sequence has not finished + 1: Start-up sequence has finished + + BIT(5) 0: All I/Os are placed in High-Z state + 1: All I/Os behave as configured + + BIT(6) 0: Flip-flops and block RAM are write disabled + 1: Flip-flops and block RAM are write enabled + + BIT(7) 0: GHIGH_B_STATUS asserted + 1: GHIGH_B_STATUS deasserted + + BIT(8) to BIT(10) Status of the mode pins + + BIT(11) 0: Initialization has not finished + 1: Initialization finished + + BIT(12) Value on INIT_B_PIN pin + + BIT(13) 0: Signal not released + 1: Signal released + + BIT(14) Value on DONE_PIN pin. + + BIT(15) 0: No IDCODE_ERROR + 1: IDCODE_ERROR + + BIT(16) 0: No SECURITY_ERROR + 1: SECURITY_ERROR + + BIT(17) System Monitor over-temperature if set + + BIT(18) to BIT(20) Start-up state machine (0 to 7) + Phase 0 = 000 + Phase 1 = 001 + Phase 2 = 011 + Phase 3 = 010 + Phase 4 = 110 + Phase 5 = 111 + Phase 6 = 101 + Phase 7 = 100 + + BIT(25) to BIT(26) Indicates the detected bus width + 00 = x1 + 01 = x8 + 10 = x16 + 11 = x32 + ====================== ============================================== + + The other bits are reserved. diff --git a/Documentation/devicetree/bindings/bus/xlnx,versal-net-cdx.yaml b/Documentation/devicetree/bindings/bus/xlnx,versal-net-cdx.yaml new file mode 100644 index 000000000000..7f62ffbdc245 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/xlnx,versal-net-cdx.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/xlnx,versal-net-cdx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMD CDX bus controller + +description: | + CDX bus controller for AMD devices is implemented to dynamically + detect CDX bus and devices using the firmware. + The CDX bus manages multiple FPGA based hardware devices, which + can support network, crypto or any other specialized type of + devices. These FPGA based devices can be added/modified dynamically + on run-time. + + All devices on the CDX bus will have a unique streamid (for IOMMU) + and a unique device ID (for MSI) corresponding to a requestor ID + (one to one associated with the device). The streamid and deviceid + are used to configure SMMU and GIC-ITS respectively. + + iommu-map property is used to define the set of stream ids + corresponding to each device and the associated IOMMU. + + The MSI writes are accompanied by sideband data (Device ID). + The msi-map property is used to associate the devices with the + device ID as well as the associated ITS controller. + + rproc property (xlnx,rproc) is used to identify the remote processor + with which APU (Application Processor Unit) interacts to find out + the bus and device configuration. + +maintainers: + - Nipun Gupta <nipun.gupta@amd.com> + - Nikhil Agarwal <nikhil.agarwal@amd.com> + +properties: + compatible: + const: xlnx,versal-net-cdx + + iommu-map: true + + msi-map: true + + xlnx,rproc: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the remoteproc_r5 rproc node using which APU interacts + with remote processor. + + ranges: true + + "#address-cells": + enum: [1, 2] + + "#size-cells": + enum: [1, 2] + +required: + - compatible + - iommu-map + - msi-map + - xlnx,rproc + - ranges + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + cdx { + compatible = "xlnx,versal-net-cdx"; + #address-cells = <1>; + #size-cells = <1>; + /* define map for RIDs 250-259 */ + iommu-map = <250 &smmu 250 10>; + /* define msi map for RIDs 250-259 */ + msi-map = <250 &its 250 10>; + xlnx,rproc = <&remoteproc_r5>; + ranges; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml index c115e2e99bd9..1c7aee5ed3e0 100644 --- a/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml @@ -34,9 +34,11 @@ properties: clock-names: const: fck - power-domains: true + power-domains: + maxItems: 1 - resets: true + resets: + maxItems: 1 "#address-cells": const: 1 @@ -51,6 +53,8 @@ required: - reg - clocks - clock-names + - power-domains + - resets - "#address-cells" - "#size-cells" @@ -108,36 +112,30 @@ patternProperties: examples: - | - #include <dt-bindings/clock/r8a7791-clock.h> + #include <dt-bindings/clock/r8a7791-cpg-mssr.h> #include <dt-bindings/power/r8a7791-sysc.h> - soc { - #address-cells = <2>; - #size-cells = <2>; - - adc@e6e54000 { - compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc"; - reg = <0 0xe6e54000 0 64>; - clocks = <&mstp9_clks R8A7791_CLK_GYROADC>; - clock-names = "fck"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - - pinctrl-0 = <&adc_pins>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - adc@0 { - reg = <0>; - compatible = "maxim,max1162"; - vref-supply = <&vref_max1162>; - }; - - adc@1 { - reg = <1>; - compatible = "maxim,max1162"; - vref-supply = <&vref_max1162>; - }; + + adc@e6e54000 { + compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc"; + reg = <0xe6e54000 64>; + clocks = <&cpg CPG_MOD 901>; + clock-names = "fck"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 901>; + + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + reg = <0>; + compatible = "maxim,max1162"; + vref-supply = <&vref_max1162>; + }; + + adc@1 { + reg = <1>; + compatible = "maxim,max1162"; + vref-supply = <&vref_max1162>; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1100.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1100.yaml new file mode 100644 index 000000000000..970ccab15e1e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1100.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,ads1100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI ADS1100/ADS1000 single channel I2C analog to digital converter + +maintainers: + - Mike Looijmans <mike.looijmans@topic.nl> + +description: | + Datasheet at: https://www.ti.com/lit/gpn/ads1100 + +properties: + compatible: + enum: + - ti,ads1100 + - ti,ads1000 + + reg: + maxItems: 1 + + vdd-supply: true + + "#io-channel-cells": + const: 0 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@49 { + compatible = "ti,ads1100"; + reg = <0x49>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml index 9eb3ecc8bbc8..590ea7936ad7 100644 --- a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml +++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml @@ -101,6 +101,15 @@ patternProperties: When not configured as a comparator, the GPO will be treated as an output-only GPIO. + drive-strength-microamp: + description: | + For channels configured as digital input, this configures the sink + current. + minimum: 0 + maximum: 1800 + default: 0 + multipleOf: 120 + required: - reg diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml index decf022335d8..b39f5217d8ff 100644 --- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml +++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml @@ -46,6 +46,9 @@ properties: - items: - const: st,ism330is - const: st,lsm6dso16is + - items: + - const: st,asm330lhb + - const: st,asm330lhh reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bu27034.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bu27034.yaml new file mode 100644 index 000000000000..30a109a1bf3b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/rohm,bu27034.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/rohm,bu27034.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BU27034 ambient light sensor + +maintainers: + - Matti Vaittinen <mazziesaccount@gmail.com> + +description: | + ROHM BU27034 is an ambient light sesnor with 3 channels and 3 photo diodes + capable of detecting a very wide range of illuminance. Typical application + is adjusting LCD and backlight power of TVs and mobile phones. + https://fscdn.rohm.com/en/products/databook/datasheet/ic/sensor/light/bu27034nuc-e.pdf + +properties: + compatible: + const: rohm,bu27034 + + reg: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@38 { + compatible = "rohm,bu27034"; + reg = <0x38>; + vdd-supply = <&vdd>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml index 63885af6a74b..6fda887ee9d4 100644 --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml @@ -17,6 +17,7 @@ description: | https://www.bosch-sensortec.com/bst/products/all_products/bmp280 https://www.bosch-sensortec.com/bst/products/all_products/bme280 https://www.bosch-sensortec.com/bst/products/all_products/bmp380 + https://www.bosch-sensortec.com/bst/products/all_products/bmp580 properties: compatible: @@ -26,6 +27,7 @@ properties: - bosch,bmp280 - bosch,bme280 - bosch,bmp380 + - bosch,bmp580 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml index c6201976378f..1ff3afca9149 100644 --- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml +++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml @@ -11,9 +11,6 @@ description: The STMicroelectronics sensor devices are pretty straight-forward what type of sensor it is. Note that whilst this covers many STMicro MEMs sensors, some more complex IMUs need their own bindings. - The STMicroelectronics sensor devices are pretty straight-forward I2C or - SPI devices, all sharing the same device tree descriptions no matter what - type of sensor it is. maintainers: - Denis Ciocca <denis.ciocca@st.com> @@ -48,6 +45,9 @@ properties: - st,lsm330d-accel - st,lsm330dl-accel - st,lsm330dlc-accel + - items: + - const: st,iis328dq + - const: st,h3lis331dl-accel - description: Silan Accelerometers enum: - silan,sc7a20 diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml index f44fc32ce87e..dbb85135fd66 100644 --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -18,6 +18,28 @@ description: | https://www.analog.com/media/en/technical-documentation/data-sheets/29861fa.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/ltm2985.pdf +$defs: + sensor-node: + type: object + description: Sensor node common constraints + + properties: + reg: + description: + Channel number. Connects the sensor to the channel with this number + of the device. + minimum: 1 + maximum: 20 + + adi,sensor-type: + description: Type of sensor connected to the device. + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - reg + - adi,sensor-type + + properties: compatible: oneOf: @@ -64,28 +86,10 @@ properties: const: 0 patternProperties: - "@([0-9a-f]+)$": - type: object - description: Sensor. - - properties: - reg: - description: - Channel number. Connects the sensor to the channel with this number - of the device. - minimum: 1 - maximum: 20 - - adi,sensor-type: - description: Type of sensor connected to the device. - $ref: /schemas/types.yaml#/definitions/uint32 - - required: - - reg - - adi,sensor-type - "^thermocouple@": - type: object + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + description: Thermocouple sensor. properties: @@ -123,7 +127,7 @@ patternProperties: description: Used for digitizing custom thermocouples. See Page 59 of the datasheet. - $ref: /schemas/types.yaml#/definitions/uint64-matrix + $ref: /schemas/types.yaml#/definitions/int64-matrix minItems: 3 maxItems: 64 items: @@ -141,7 +145,9 @@ patternProperties: - adi,custom-thermocouple "^diode@": - type: object + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + description: Diode sensor. properties: @@ -184,7 +190,8 @@ patternProperties: default: 0 "^rtd@": - type: object + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false description: RTD sensor. properties: @@ -282,7 +289,8 @@ patternProperties: - adi,custom-rtd "^thermistor@": - type: object + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false description: Thermistor sensor. properties: @@ -383,7 +391,8 @@ patternProperties: - adi,custom-thermistor "^adc@": - type: object + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false description: Direct ADC sensor. properties: @@ -397,7 +406,8 @@ patternProperties: type: boolean "^temp@": - type: object + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false description: Active analog temperature sensor. properties: @@ -426,7 +436,8 @@ patternProperties: - adi,custom-temp "^rsense@": - type: object + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false description: Sense resistor sensor. properties: diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml index c4f1c69f9330..8c6d7735e875 100644 --- a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml @@ -7,9 +7,10 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: TI TMP117 - Digital temperature sensor with integrated NV memory description: | - TI TMP117 - Digital temperature sensor with integrated NV memory that supports - I2C interface. - https://www.ti.com/lit/gpn/tmp1 + TI TMP116/117 - Digital temperature sensor with integrated NV memory that + supports I2C interface. + https://www.ti.com/lit/gpn/tmp116 + https://www.ti.com/lit/gpn/tmp117 maintainers: - Puranjay Mohan <puranjay12@gmail.com> @@ -17,6 +18,7 @@ maintainers: properties: compatible: enum: + - ti,tmp116 - ti,tmp117 reg: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml index 12a0d3ecbabb..5d17bdcfdf70 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml @@ -22,14 +22,14 @@ description: | properties: compatible: oneOf: + - const: qcom,msm8998-bwmon # BWMON v4 - items: - enum: - qcom,sc7280-cpu-bwmon - qcom,sc8280xp-cpu-bwmon - - qcom,sdm845-bwmon + - qcom,sdm845-cpu-bwmon - qcom,sm8550-cpu-bwmon - - const: qcom,msm8998-bwmon - - const: qcom,msm8998-bwmon # BWMON v4 + - const: qcom,sdm845-bwmon # BWMON v4, unified register space - items: - enum: - qcom,sc8280xp-llcc-bwmon @@ -49,9 +49,13 @@ properties: type: object reg: - # BWMON v4 (currently described) and BWMON v5 use one register address - # space. BWMON v2 uses two register spaces - not yet described. - maxItems: 1 + # BWMON v5 uses one register address space, v1-v4 use one or two. + minItems: 1 + maxItems: 2 + + reg-names: + minItems: 1 + maxItems: 2 required: - compatible @@ -63,13 +67,36 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + const: qcom,msm8998-bwmon + then: + properties: + reg: + minItems: 2 + + reg-names: + items: + - const: monitor + - const: global + + else: + properties: + reg: + maxItems: 1 + + reg-names: + maxItems: 1 + examples: - | #include <dt-bindings/interconnect/qcom,sdm845.h> #include <dt-bindings/interrupt-controller/arm-gic.h> pmu@1436400 { - compatible = "qcom,sdm845-bwmon", "qcom,msm8998-bwmon"; + compatible = "qcom,sdm845-cpu-bwmon", "qcom,sdm845-bwmon"; reg = <0x01436400 0x600>; interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml index 576992a6dc5a..9d0a98d77ae9 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml @@ -29,6 +29,7 @@ properties: - enum: - qcom,sc7280-epss-l3 - qcom,sc8280xp-epss-l3 + - qcom,sm6375-cpucp-l3 - qcom,sm8250-epss-l3 - qcom,sm8350-epss-l3 - const: qcom,epss-l3 diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml index 14c170c6a86e..296001e7f498 100644 --- a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml +++ b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml @@ -11,7 +11,7 @@ maintainers: - Maxime Ripard <mripard@kernel.org> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml b/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml new file mode 100644 index 000000000000..e49c2754ff55 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/amlogic,meson-gxbb-efuse.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson GX eFuse + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +allOf: + - $ref: nvmem.yaml# + +properties: + compatible: + oneOf: + - const: amlogic,meson-gxbb-efuse + - items: + - const: amlogic,meson-gx-efuse + - const: amlogic,meson-gxbb-efuse + + clocks: + maxItems: 1 + + secure-monitor: + description: phandle to the secure-monitor node + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - clocks + - secure-monitor + +unevaluatedProperties: false + +examples: + - | + efuse: efuse { + compatible = "amlogic,meson-gxbb-efuse"; + clocks = <&clk_efuse>; + #address-cells = <1>; + #size-cells = <1>; + secure-monitor = <&sm>; + + sn: sn@14 { + reg = <0x14 0x10>; + }; + + eth_mac: mac@34 { + reg = <0x34 0x10>; + }; + + bid: bid@46 { + reg = <0x46 0x30>; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml b/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml new file mode 100644 index 000000000000..84b3dfd21e09 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/amlogic,meson6-efuse.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson6 eFuse + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + - Martin Blumenstingl <martin.blumenstingl@googlemail.com> + +allOf: + - $ref: nvmem.yaml# + +properties: + compatible: + enum: + - amlogic,meson6-efuse + - amlogic,meson8-efuse + - amlogic,meson8b-efuse + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: core + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + efuse: efuse@0 { + compatible = "amlogic,meson6-efuse"; + reg = <0x0 0x2000>; + clocks = <&clk_efuse>; + clock-names = "core"; + #address-cells = <1>; + #size-cells = <1>; + + ethernet_mac_address: mac@1b4 { + reg = <0x1b4 0x6>; + }; + + temperature_calib: calib@1f4 { + reg = <0x1f4 0x4>; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt deleted file mode 100644 index f7b3ed74db54..000000000000 --- a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt +++ /dev/null @@ -1,48 +0,0 @@ -= Amlogic Meson GX eFuse device tree bindings = - -Required properties: -- compatible: should be "amlogic,meson-gxbb-efuse" -- clocks: phandle to the efuse peripheral clock provided by the - clock controller. -- secure-monitor: phandle to the secure-monitor node - -= Data cells = -Are child nodes of eFuse, bindings of which as described in -bindings/nvmem/nvmem.txt - -Example: - - efuse: efuse { - compatible = "amlogic,meson-gxbb-efuse"; - clocks = <&clkc CLKID_EFUSE>; - #address-cells = <1>; - #size-cells = <1>; - secure-monitor = <&sm>; - - sn: sn@14 { - reg = <0x14 0x10>; - }; - - eth_mac: eth_mac@34 { - reg = <0x34 0x10>; - }; - - bid: bid@46 { - reg = <0x46 0x30>; - }; - }; - - sm: secure-monitor { - compatible = "amlogic,meson-gxbb-sm"; - }; - -= Data consumers = -Are device nodes which consume nvmem data cells. - -For example: - - eth_mac { - ... - nvmem-cells = <ð_mac>; - nvmem-cell-names = "eth_mac"; - }; diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt deleted file mode 100644 index a3c63954a1a4..000000000000 --- a/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt +++ /dev/null @@ -1,22 +0,0 @@ -Amlogic Meson6/Meson8/Meson8b efuse - -Required Properties: -- compatible: depending on the SoC this should be one of: - - "amlogic,meson6-efuse" - - "amlogic,meson8-efuse" - - "amlogic,meson8b-efuse" -- reg: base address and size of the efuse registers -- clocks: a reference to the efuse core gate clock -- clock-names: must be "core" - -All properties and sub-nodes as well as the consumer bindings -defined in nvmem.txt in this directory are also supported. - - -Example: - efuse: nvmem@0 { - compatible = "amlogic,meson8-efuse"; - reg = <0x0 0x2000>; - clocks = <&clkc CLKID_EFUSE>; - clock-names = "core"; - }; diff --git a/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml b/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml index 5ec8f2bdb3a5..e0860b6b85f3 100644 --- a/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml +++ b/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml @@ -15,7 +15,7 @@ maintainers: - Sven Peter <sven@svenpeter.dev> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml index 25033de3ef6b..36def7128fca 100644 --- a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml +++ b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml @@ -20,7 +20,7 @@ maintainers: - RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml b/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml index 3b4e6e94cb81..70fb2ad25103 100644 --- a/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml +++ b/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml @@ -14,7 +14,7 @@ description: | unique identifier per part. allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/imx-iim.yaml b/Documentation/devicetree/bindings/nvmem/imx-iim.yaml index 7aac1995cfaf..e9d9d8df4811 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-iim.yaml +++ b/Documentation/devicetree/bindings/nvmem/imx-iim.yaml @@ -14,7 +14,7 @@ description: | i.MX25, i.MX27, i.MX31, i.MX35, i.MX51 and i.MX53 SoCs. allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml index d0a239d7e199..9876243ff1e8 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml @@ -15,7 +15,7 @@ description: | i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN and i.MX8MP SoCs. allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml index fe2cd7f1afba..e89fd879c968 100644 --- a/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml @@ -10,7 +10,7 @@ maintainers: - PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml index 5a0e7671aa3f..714a6538cc7c 100644 --- a/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml +++ b/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml @@ -61,7 +61,7 @@ properties: type: object additionalProperties: false - platforn-name: + platform-name: type: object additionalProperties: false diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml index 75e0a516e59a..d16d42fb98b6 100644 --- a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml @@ -15,7 +15,7 @@ maintainers: - Lala Lin <lala.lin@mediatek.com> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: $nodename: diff --git a/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml index c3c96fd0baac..a296d348adb4 100644 --- a/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml +++ b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml @@ -15,7 +15,7 @@ description: | settings, chip identifiers) or user specific data could be stored. allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml index ff317fd7c15b..8938eec22b52 100644 --- a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml @@ -10,7 +10,7 @@ maintainers: - Anson Huang <Anson.Huang@nxp.com> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml b/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml index f93bc50c40d7..6c26800f8b79 100644 --- a/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml +++ b/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml @@ -17,7 +17,7 @@ maintainers: - Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml index 2173fe82317d..8d8503dd934b 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml @@ -10,7 +10,7 @@ maintainers: - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: @@ -32,6 +32,8 @@ properties: - qcom,sdm670-qfprom - qcom,sdm845-qfprom - qcom,sm6115-qfprom + - qcom,sm6350-qfprom + - qcom,sm6375-qfprom - qcom,sm8150-qfprom - qcom,sm8250-qfprom - const: qcom,qfprom diff --git a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml index e08504ef3b6e..dce0c7d84ce7 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml @@ -15,7 +15,7 @@ description: | to/from the PBUS. allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: @@ -42,17 +42,22 @@ unevaluatedProperties: false examples: - | - sdam_1: nvram@b000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "qcom,spmi-sdam"; - reg = <0xb000 0x100>; - ranges = <0 0xb000 0x100>; - - /* Data cells */ - restart_reason: restart@50 { - reg = <0x50 0x1>; - bits = <6 2>; - }; - }; + pmic { + #address-cells = <1>; + #size-cells = <0>; + + sdam_1: nvram@b000 { + compatible = "qcom,spmi-sdam"; + reg = <0xb000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xb000 0x100>; + + /* Data cells */ + restart_reason: restart@50 { + reg = <0x50 0x1>; + bits = <6 2>; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/nvmem/rmem.yaml b/Documentation/devicetree/bindings/nvmem/rmem.yaml index a4a755dcfc43..38a39c9b8c1c 100644 --- a/Documentation/devicetree/bindings/nvmem/rmem.yaml +++ b/Documentation/devicetree/bindings/nvmem/rmem.yaml @@ -10,7 +10,7 @@ maintainers: - Nicolas Saenz Julienne <nsaenzjulienne@suse.de> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml index febee8129aa9..c5403e149080 100644 --- a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml @@ -10,7 +10,7 @@ maintainers: - Heiko Stuebner <heiko@sntech.de> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml index dc790d2cd9f0..b8bca0599c45 100644 --- a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml @@ -11,7 +11,7 @@ maintainers: - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: "#address-cells": true diff --git a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml index 172597cc5c63..a69de3e92282 100644 --- a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml +++ b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml @@ -16,7 +16,7 @@ maintainers: - Fabrice Gasnier <fabrice.gasnier@foss.st.com> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml index a7644ebbc2ca..8877c2283e9e 100644 --- a/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml @@ -11,7 +11,7 @@ maintainers: - Vincent Shih <vincent.sunplus@gmail.com> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml index cbc5c69fd405..36d97fb87865 100644 --- a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml +++ b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml @@ -50,7 +50,11 @@ properties: ethaddr: type: object - description: Ethernet interface's MAC address + description: Ethernet interfaces base MAC address. + properties: + "#nvmem-cell-cells": + description: The first argument is a MAC address offset. + const: 1 additionalProperties: false @@ -72,6 +76,7 @@ examples: reg = <0x40000 0x10000>; mac: ethaddr { + #nvmem-cell-cells = <1>; }; }; }; diff --git a/Documentation/devicetree/bindings/w1/maxim,ds2482.yaml b/Documentation/devicetree/bindings/w1/maxim,ds2482.yaml new file mode 100644 index 000000000000..422becc6e1fa --- /dev/null +++ b/Documentation/devicetree/bindings/w1/maxim,ds2482.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/w1/maxim,ds2482.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim One wire bus master controller + +maintainers: + - Stefan Wahren <stefan.wahren@chargebyte.com> + +description: | + I2C to 1-wire bridges + + https://www.analog.com/media/en/technical-documentation/data-sheets/ds2482-100.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/DS2482-800.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/DS2484.pdf + +properties: + compatible: + enum: + - maxim,ds2482 + - maxim,ds2484 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: + type: object + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + onewire@18 { + compatible = "maxim,ds2484"; + reg = <0x18>; + }; + }; diff --git a/Documentation/driver-api/nvmem.rst b/Documentation/driver-api/nvmem.rst index e3366322d46c..de221e91c8e3 100644 --- a/Documentation/driver-api/nvmem.rst +++ b/Documentation/driver-api/nvmem.rst @@ -185,3 +185,18 @@ ex:: ===================== See Documentation/devicetree/bindings/nvmem/nvmem.txt + +8. NVMEM layouts +================ + +NVMEM layouts are yet another mechanism to create cells. With the device +tree binding it is possible to specify simple cells by using an offset +and a length. Sometimes, the cells doesn't have a static offset, but +the content is still well defined, e.g. tag-length-values. In this case, +the NVMEM device content has to be first parsed and the cells need to +be added accordingly. Layouts let you read the content of the NVMEM device +and let you add cells dynamically. + +Another use case for layouts is the post processing of cells. With layouts, +it is possible to associate a custom post processing hook to a cell. It +even possible to add this hook to cells not created by the layout itself. diff --git a/Documentation/process/magic-number.rst b/Documentation/process/magic-number.rst index 64b5948fc1d4..7029c3c084ee 100644 --- a/Documentation/process/magic-number.rst +++ b/Documentation/process/magic-number.rst @@ -72,7 +72,6 @@ PG_MAGIC 'P' pg_{read,write}_hdr ``include/linux/ APM_BIOS_MAGIC 0x4101 apm_user ``arch/x86/kernel/apm_32.c`` FASYNC_MAGIC 0x4601 fasync_struct ``include/linux/fs.h`` SLIP_MAGIC 0x5302 slip ``drivers/net/slip.h`` -MGSLPC_MAGIC 0x5402 mgslpc_info ``drivers/char/pcmcia/synclink_cs.c`` BAYCOM_MAGIC 0x19730510 baycom_state ``drivers/net/baycom_epp.c`` HDLCDRV_MAGIC 0x5ac6e778 hdlcdrv_state ``include/linux/hdlcdrv.h`` KV_MAGIC 0x5f4b565f kernel_vars_s ``arch/mips/include/asm/sn/klkernvars.h`` diff --git a/Documentation/translations/it_IT/process/magic-number.rst b/Documentation/translations/it_IT/process/magic-number.rst index 02eb7eb2448e..ae92ab633c16 100644 --- a/Documentation/translations/it_IT/process/magic-number.rst +++ b/Documentation/translations/it_IT/process/magic-number.rst @@ -78,7 +78,6 @@ PG_MAGIC 'P' pg_{read,write}_hdr ``include/linux/ APM_BIOS_MAGIC 0x4101 apm_user ``arch/x86/kernel/apm_32.c`` FASYNC_MAGIC 0x4601 fasync_struct ``include/linux/fs.h`` SLIP_MAGIC 0x5302 slip ``drivers/net/slip.h`` -MGSLPC_MAGIC 0x5402 mgslpc_info ``drivers/char/pcmcia/synclink_cs.c`` BAYCOM_MAGIC 0x19730510 baycom_state ``drivers/net/baycom_epp.c`` HDLCDRV_MAGIC 0x5ac6e778 hdlcdrv_state ``include/linux/hdlcdrv.h`` KV_MAGIC 0x5f4b565f kernel_vars_s ``arch/mips/include/asm/sn/klkernvars.h`` diff --git a/Documentation/translations/sp_SP/process/magic-number.rst b/Documentation/translations/sp_SP/process/magic-number.rst index 2b62cec34e8e..7c7dfb4ba80b 100644 --- a/Documentation/translations/sp_SP/process/magic-number.rst +++ b/Documentation/translations/sp_SP/process/magic-number.rst @@ -77,7 +77,6 @@ PG_MAGIC 'P' pg_{read,write}_hdr ``include/linux/ APM_BIOS_MAGIC 0x4101 apm_user ``arch/x86/kernel/apm_32.c`` FASYNC_MAGIC 0x4601 fasync_struct ``include/linux/fs.h`` SLIP_MAGIC 0x5302 slip ``drivers/net/slip.h`` -MGSLPC_MAGIC 0x5402 mgslpc_info ``drivers/char/pcmcia/synclink_cs.c`` BAYCOM_MAGIC 0x19730510 baycom_state ``drivers/net/baycom_epp.c`` HDLCDRV_MAGIC 0x5ac6e778 hdlcdrv_state ``include/linux/hdlcdrv.h`` KV_MAGIC 0x5f4b565f kernel_vars_s ``arch/mips/include/asm/sn/klkernvars.h`` diff --git a/Documentation/translations/zh_CN/process/magic-number.rst b/Documentation/translations/zh_CN/process/magic-number.rst index 0617ce125e12..37ed33034134 100644 --- a/Documentation/translations/zh_CN/process/magic-number.rst +++ b/Documentation/translations/zh_CN/process/magic-number.rst @@ -61,7 +61,6 @@ PG_MAGIC 'P' pg_{read,write}_hdr ``include/linux/ APM_BIOS_MAGIC 0x4101 apm_user ``arch/x86/kernel/apm_32.c`` FASYNC_MAGIC 0x4601 fasync_struct ``include/linux/fs.h`` SLIP_MAGIC 0x5302 slip ``drivers/net/slip.h`` -MGSLPC_MAGIC 0x5402 mgslpc_info ``drivers/char/pcmcia/synclink_cs.c`` BAYCOM_MAGIC 0x19730510 baycom_state ``drivers/net/baycom_epp.c`` HDLCDRV_MAGIC 0x5ac6e778 hdlcdrv_state ``include/linux/hdlcdrv.h`` KV_MAGIC 0x5f4b565f kernel_vars_s ``arch/mips/include/asm/sn/klkernvars.h`` diff --git a/Documentation/translations/zh_TW/process/magic-number.rst b/Documentation/translations/zh_TW/process/magic-number.rst index f3f7082e17c6..1d48e1bbf5f2 100644 --- a/Documentation/translations/zh_TW/process/magic-number.rst +++ b/Documentation/translations/zh_TW/process/magic-number.rst @@ -64,7 +64,6 @@ PG_MAGIC 'P' pg_{read,write}_hdr ``include/linux/ APM_BIOS_MAGIC 0x4101 apm_user ``arch/x86/kernel/apm_32.c`` FASYNC_MAGIC 0x4601 fasync_struct ``include/linux/fs.h`` SLIP_MAGIC 0x5302 slip ``drivers/net/slip.h`` -MGSLPC_MAGIC 0x5402 mgslpc_info ``drivers/char/pcmcia/synclink_cs.c`` BAYCOM_MAGIC 0x19730510 baycom_state ``drivers/net/baycom_epp.c`` HDLCDRV_MAGIC 0x5ac6e778 hdlcdrv_state ``include/linux/hdlcdrv.h`` KV_MAGIC 0x5f4b565f kernel_vars_s ``arch/mips/include/asm/sn/klkernvars.h`` diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst index 0a1882e296ae..176e8fc3f31b 100644 --- a/Documentation/userspace-api/ioctl/ioctl-number.rst +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst @@ -222,7 +222,6 @@ Code Seq# Include File Comments 'b' 00-FF conflict! bit3 vme host bridge <mailto:natalia@nikhefk.nikhef.nl> 'b' 00-0F linux/dma-buf.h conflict! -'c' all linux/cm4000_cs.h conflict! 'c' 00-7F linux/comstats.h conflict! 'c' 00-7F linux/coda.h conflict! 'c' 00-1F linux/chio.h conflict! diff --git a/MAINTAINERS b/MAINTAINERS index 40b586033a06..efb03e13c404 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -964,6 +964,14 @@ Q: https://patchwork.kernel.org/project/linux-rdma/list/ F: drivers/infiniband/hw/efa/ F: include/uapi/rdma/efa-abi.h +AMD CDX BUS DRIVER +M: Nipun Gupta <nipun.gupta@amd.com> +M: Nikhil Agarwal <nikhil.agarwal@amd.com> +S: Maintained +F: Documentation/devicetree/bindings/bus/xlnx,versal-net-cdx.yaml +F: drivers/cdx/* +F: include/linux/cdx/* + AMD CRYPTOGRAPHIC COPROCESSOR (CCP) DRIVER M: Tom Lendacky <thomas.lendacky@amd.com> M: John Allen <john.allen@amd.com> @@ -1431,11 +1439,6 @@ S: Supported F: drivers/clk/analogbits/* F: include/linux/clk/analogbits* -ANDROID CONFIG FRAGMENTS -M: Rob Herring <robh@kernel.org> -S: Supported -F: kernel/configs/android* - ANDROID DRIVERS M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> M: Arve HjønnevÃ¥g <arve@android.com> @@ -2095,7 +2098,6 @@ F: arch/arm/boot/dts/cx92755* N: digicolor ARM/CORESIGHT FRAMEWORK AND DRIVERS -M: Mathieu Poirier <mathieu.poirier@linaro.org> M: Suzuki K Poulose <suzuki.poulose@arm.com> R: Mike Leach <mike.leach@linaro.org> R: Leo Yan <leo.yan@linaro.org> @@ -10005,6 +10007,13 @@ F: Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector F: Documentation/devicetree/bindings/iio/adc/envelope-detector.yaml F: drivers/iio/adc/envelope-detector.c +IIO LIGHT SENSOR GAIN-TIME-SCALE HELPERS +M: Matti Vaittinen <mazziesaccount@gmail.com> +L: linux-iio@vger.kernel.org +S: Maintained +F: drivers/iio/light/gain-time-scale-helper.c +F: drivers/iio/light/gain-time-scale-helper.h + IIO MULTIPLEXER M: Peter Rosin <peda@axentia.se> L: linux-iio@vger.kernel.org @@ -10528,6 +10537,7 @@ F: drivers/watchdog/mei_wdt.c F: include/linux/mei_aux.h F: include/linux/mei_cl_bus.h F: include/uapi/linux/mei.h +F: include/uapi/linux/mei_uuid.h F: include/uapi/linux/uuid.h F: samples/mei/* @@ -15411,18 +15421,6 @@ S: Maintained F: Documentation/filesystems/omfs.rst F: fs/omfs/ -OMNIKEY CARDMAN 4000 DRIVER -M: Harald Welte <laforge@gnumonks.org> -S: Maintained -F: drivers/char/pcmcia/cm4000_cs.c -F: include/linux/cm4000_cs.h -F: include/uapi/linux/cm4000_cs.h - -OMNIKEY CARDMAN 4040 DRIVER -M: Harald Welte <laforge@gnumonks.org> -S: Maintained -F: drivers/char/pcmcia/cm4040_cs.* - OMNIVISION OG01A1B SENSOR DRIVER M: Shawn Tu <shawnx.tu@intel.com> L: linux-media@vger.kernel.org @@ -15640,6 +15638,12 @@ L: linux-hwmon@vger.kernel.org S: Maintained F: drivers/hwmon/oxp-sensors.c +ONIE TLV NVMEM LAYOUT DRIVER +M: Miquel Raynal <miquel.raynal@bootlin.com> +S: Maintained +F: Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml +F: drivers/nvmem/layouts/onie-tlv.c + ONION OMEGA2+ BOARD M: Harvey Hunt <harveyhuntnexus@gmail.com> L: linux-mips@vger.kernel.org @@ -18203,6 +18207,12 @@ S: Maintained F: Documentation/devicetree/bindings/iio/light/bh1750.yaml F: drivers/iio/light/bh1750.c +ROHM BU27034 AMBIENT LIGHT SENSOR DRIVER +M: Matti Vaittinen <mazziesaccount@gmail.com> +L: linux-iio@vger.kernel.org +S: Supported +F: drivers/iio/light/rohm-bu27034.c + ROHM MULTIFUNCTION BD9571MWV-M PMIC DEVICE DRIVERS M: Marek Vasut <marek.vasut+renesas@gmail.com> L: linux-kernel@vger.kernel.org @@ -18727,11 +18737,6 @@ F: include/linux/wait.h F: include/uapi/linux/sched.h F: kernel/sched/ -SCR24X CHIP CARD INTERFACE DRIVER -M: Lubomir Rintel <lkundrak@v3.sk> -S: Supported -F: drivers/char/pcmcia/scr24x_cs.c - SCSI RDMA PROTOCOL (SRP) INITIATOR M: Bart Van Assche <bvanassche@acm.org> L: linux-rdma@vger.kernel.org @@ -19310,6 +19315,12 @@ F: drivers/irqchip/irq-sl28cpld.c F: drivers/pwm/pwm-sl28cpld.c F: drivers/watchdog/sl28cpld_wdt.c +SL28 VPD NVMEM LAYOUT DRIVER +M: Michael Walle <michael@walle.cc> +S: Maintained +F: Documentation/devicetree/bindings/nvmem/layouts/kontron,sl28-vpd.yaml +F: drivers/nvmem/layouts/sl28vpd.c + SLAB ALLOCATOR M: Christoph Lameter <cl@linux.com> M: Pekka Enberg <penberg@kernel.org> @@ -22566,7 +22577,7 @@ S: Orphan F: drivers/mmc/host/vub300.c W1 DALLAS'S 1-WIRE BUS -M: Evgeniy Polyakov <zbr@ioremap.net> +M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> S: Maintained F: Documentation/devicetree/bindings/w1/ F: Documentation/w1/ diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig index adc314049fdd..ff3d79083581 100644 --- a/arch/powerpc/configs/ppc6xx_defconfig +++ b/arch/powerpc/configs/ppc6xx_defconfig @@ -614,8 +614,6 @@ CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_VIRTIO=m CONFIG_NVRAM=y CONFIG_DTLK=m -CONFIG_CARDMAN_4000=m -CONFIG_CARDMAN_4040=m CONFIG_IPWIRELESS=m CONFIG_I2C_CHARDEV=m CONFIG_I2C_HYDRA=m diff --git a/drivers/Kconfig b/drivers/Kconfig index 968bd0a6fd78..514ae6b24cb2 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -241,4 +241,6 @@ source "drivers/peci/Kconfig" source "drivers/hte/Kconfig" +source "drivers/cdx/Kconfig" + endmenu diff --git a/drivers/Makefile b/drivers/Makefile index 20b118dca999..7241d80a7b29 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -194,3 +194,4 @@ obj-$(CONFIG_MOST) += most/ obj-$(CONFIG_PECI) += peci/ obj-$(CONFIG_HTE) += hte/ obj-$(CONFIG_DRM_ACCEL) += accel/ +obj-$(CONFIG_CDX_BUS) += cdx/ diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index c32a06bcac0c..d161ff707de4 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -810,9 +810,10 @@ static bool acpi_of_modalias(struct acpi_device *adev, * @modalias: Pointer to buffer that modalias value will be copied into * @len: Length of modalias buffer * - * This is a counterpart of of_modalias_node() for struct acpi_device objects. - * If there is a compatible string for @adev, it will be copied to @modalias - * with the vendor prefix stripped; otherwise, @default_id will be used. + * This is a counterpart of of_alias_from_compatible() for struct acpi_device + * objects. If there is a compatible string for @adev, it will be copied to + * @modalias with the vendor prefix stripped; otherwise, @default_id will be + * used. */ void acpi_set_modalias(struct acpi_device *adev, const char *default_id, char *modalias, size_t len) diff --git a/drivers/bus/mhi/ep/main.c b/drivers/bus/mhi/ep/main.c index a6a48e515478..600881808982 100644 --- a/drivers/bus/mhi/ep/main.c +++ b/drivers/bus/mhi/ep/main.c @@ -126,7 +126,7 @@ static int mhi_ep_process_cmd_ring(struct mhi_ep_ring *ring, struct mhi_ring_ele /* Check if the channel is supported by the controller */ if ((ch_id >= mhi_cntrl->max_chan) || !mhi_cntrl->mhi_chan[ch_id].name) { - dev_err(dev, "Channel (%u) not supported!\n", ch_id); + dev_dbg(dev, "Channel (%u) not supported!\n", ch_id); return -ENODEV; } @@ -702,7 +702,7 @@ static void mhi_ep_cmd_ring_worker(struct work_struct *work) el = &ring->ring_cache[ring->rd_offset]; ret = mhi_ep_process_cmd_ring(ring, el); - if (ret) + if (ret && ret != -ENODEV) dev_err(dev, "Error processing cmd ring element: %zu\n", ring->rd_offset); mhi_ep_ring_inc_index(ring); diff --git a/drivers/bus/mhi/host/boot.c b/drivers/bus/mhi/host/boot.c index 1c69feee1703..d2a19b07ccb8 100644 --- a/drivers/bus/mhi/host/boot.c +++ b/drivers/bus/mhi/host/boot.c @@ -391,6 +391,7 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl) { const struct firmware *firmware = NULL; struct device *dev = &mhi_cntrl->mhi_dev->dev; + enum mhi_pm_state new_state; const char *fw_name; void *buf; dma_addr_t dma_addr; @@ -508,14 +509,18 @@ error_ready_state: } error_fw_load: - mhi_cntrl->pm_state = MHI_PM_FW_DL_ERR; - wake_up_all(&mhi_cntrl->state_event); + write_lock_irq(&mhi_cntrl->pm_lock); + new_state = mhi_tryset_pm_state(mhi_cntrl, MHI_PM_FW_DL_ERR); + write_unlock_irq(&mhi_cntrl->pm_lock); + if (new_state == MHI_PM_FW_DL_ERR) + wake_up_all(&mhi_cntrl->state_event); } int mhi_download_amss_image(struct mhi_controller *mhi_cntrl) { struct image_info *image_info = mhi_cntrl->fbc_image; struct device *dev = &mhi_cntrl->mhi_dev->dev; + enum mhi_pm_state new_state; int ret; if (!image_info) @@ -526,8 +531,11 @@ int mhi_download_amss_image(struct mhi_controller *mhi_cntrl) &image_info->mhi_buf[image_info->entries - 1]); if (ret) { dev_err(dev, "MHI did not load AMSS, ret:%d\n", ret); - mhi_cntrl->pm_state = MHI_PM_FW_DL_ERR; - wake_up_all(&mhi_cntrl->state_event); + write_lock_irq(&mhi_cntrl->pm_lock); + new_state = mhi_tryset_pm_state(mhi_cntrl, MHI_PM_FW_DL_ERR); + write_unlock_irq(&mhi_cntrl->pm_lock); + if (new_state == MHI_PM_FW_DL_ERR) + wake_up_all(&mhi_cntrl->state_event); } return ret; diff --git a/drivers/bus/mhi/host/init.c b/drivers/bus/mhi/host/init.c index 3d779ee6396d..f72fcb66f408 100644 --- a/drivers/bus/mhi/host/init.c +++ b/drivers/bus/mhi/host/init.c @@ -516,6 +516,12 @@ int mhi_init_mmio(struct mhi_controller *mhi_cntrl) return -EIO; } + if (val >= mhi_cntrl->reg_len - (8 * MHI_DEV_WAKE_DB)) { + dev_err(dev, "CHDB offset: 0x%x is out of range: 0x%zx\n", + val, mhi_cntrl->reg_len - (8 * MHI_DEV_WAKE_DB)); + return -ERANGE; + } + /* Setup wake db */ mhi_cntrl->wake_db = base + val + (8 * MHI_DEV_WAKE_DB); mhi_cntrl->wake_set = false; @@ -532,6 +538,12 @@ int mhi_init_mmio(struct mhi_controller *mhi_cntrl) return -EIO; } + if (val >= mhi_cntrl->reg_len - (8 * mhi_cntrl->total_ev_rings)) { + dev_err(dev, "ERDB offset: 0x%x is out of range: 0x%zx\n", + val, mhi_cntrl->reg_len - (8 * mhi_cntrl->total_ev_rings)); + return -ERANGE; + } + /* Setup event db address for each ev_ring */ mhi_event = mhi_cntrl->mhi_event; for (i = 0; i < mhi_cntrl->total_ev_rings; i++, val += 8, mhi_event++) { @@ -1100,7 +1112,7 @@ int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl) if (bhi_off >= mhi_cntrl->reg_len) { dev_err(dev, "BHI offset: 0x%x is out of range: 0x%zx\n", bhi_off, mhi_cntrl->reg_len); - ret = -EINVAL; + ret = -ERANGE; goto error_reg_offset; } mhi_cntrl->bhi = mhi_cntrl->regs + bhi_off; @@ -1117,7 +1129,7 @@ int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl) dev_err(dev, "BHIe offset: 0x%x is out of range: 0x%zx\n", bhie_off, mhi_cntrl->reg_len); - ret = -EINVAL; + ret = -ERANGE; goto error_reg_offset; } mhi_cntrl->bhie = mhi_cntrl->regs + bhie_off; diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c index df0fbfee7b78..74a75439c713 100644 --- a/drivers/bus/mhi/host/main.c +++ b/drivers/bus/mhi/host/main.c @@ -503,7 +503,7 @@ irqreturn_t mhi_intvec_threaded_handler(int irq_number, void *priv) } write_unlock_irq(&mhi_cntrl->pm_lock); - if (pm_state != MHI_PM_SYS_ERR_DETECT || ee == mhi_cntrl->ee) + if (pm_state != MHI_PM_SYS_ERR_DETECT) goto exit_intvec; switch (ee) { @@ -961,7 +961,9 @@ int mhi_process_ctrl_ev_ring(struct mhi_controller *mhi_cntrl, } read_lock_bh(&mhi_cntrl->pm_lock); - if (likely(MHI_DB_ACCESS_VALID(mhi_cntrl))) + + /* Ring EV DB only if there is any pending element to process */ + if (likely(MHI_DB_ACCESS_VALID(mhi_cntrl)) && count) mhi_ring_er_db(mhi_event); read_unlock_bh(&mhi_cntrl->pm_lock); @@ -1031,7 +1033,9 @@ int mhi_process_data_event_ring(struct mhi_controller *mhi_cntrl, count++; } read_lock_bh(&mhi_cntrl->pm_lock); - if (likely(MHI_DB_ACCESS_VALID(mhi_cntrl))) + + /* Ring EV DB only if there is any pending element to process */ + if (likely(MHI_DB_ACCESS_VALID(mhi_cntrl)) && count) mhi_ring_er_db(mhi_event); read_unlock_bh(&mhi_cntrl->pm_lock); @@ -1679,18 +1683,3 @@ void mhi_unprepare_from_transfer(struct mhi_device *mhi_dev) } } EXPORT_SYMBOL_GPL(mhi_unprepare_from_transfer); - -int mhi_poll(struct mhi_device *mhi_dev, u32 budget) -{ - struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl; - struct mhi_chan *mhi_chan = mhi_dev->dl_chan; - struct mhi_event *mhi_event = &mhi_cntrl->mhi_event[mhi_chan->er_index]; - int ret; - - spin_lock_bh(&mhi_event->lock); - ret = mhi_event->process_event(mhi_cntrl, mhi_event, budget); - spin_unlock_bh(&mhi_event->lock); - - return ret; -} -EXPORT_SYMBOL_GPL(mhi_poll); diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c index f39657f71483..db0a0b062d8e 100644 --- a/drivers/bus/mhi/host/pci_generic.c +++ b/drivers/bus/mhi/host/pci_generic.c @@ -8,7 +8,6 @@ * Copyright (C) 2020 Linaro Ltd <loic.poulain@linaro.org> */ -#include <linux/aer.h> #include <linux/delay.h> #include <linux/device.h> #include <linux/mhi.h> @@ -344,8 +343,6 @@ static const struct mhi_channel_config mhi_foxconn_sdx55_channels[] = { MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0), MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0), MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0), - MHI_CHANNEL_CONFIG_UL(92, "DUN2", 32, 1), - MHI_CHANNEL_CONFIG_DL(93, "DUN2", 32, 1), MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2), MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3), }; @@ -366,6 +363,15 @@ static const struct mhi_controller_config modem_foxconn_sdx55_config = { .event_cfg = mhi_foxconn_sdx55_events, }; +static const struct mhi_pci_dev_info mhi_foxconn_sdx24_info = { + .name = "foxconn-sdx24", + .config = &modem_foxconn_sdx55_config, + .bar_num = MHI_PCI_DEFAULT_BAR_NUM, + .dma_data_width = 32, + .mru_default = 32768, + .sideband_wake = false, +}; + static const struct mhi_pci_dev_info mhi_foxconn_sdx55_info = { .name = "foxconn-sdx55", .fw = "qcom/sdx55m/sbl1.mbn", @@ -590,6 +596,15 @@ static const struct pci_device_id mhi_pci_id_table[] = { /* T99W373 (sdx62) */ { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0d9), .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx65_info }, + /* T99W510 (sdx24), variant 1 */ + { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0f0), + .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx24_info }, + /* T99W510 (sdx24), variant 2 */ + { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0f1), + .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx24_info }, + /* T99W510 (sdx24), variant 3 */ + { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0f2), + .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx24_info }, /* MV31-W (Cinterion) */ { PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00b3), .driver_data = (kernel_ulong_t) &mhi_mv31_info }, @@ -903,11 +918,9 @@ static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) mhi_pdev->pci_state = pci_store_saved_state(pdev); pci_load_saved_state(pdev, NULL); - pci_enable_pcie_error_reporting(pdev); - err = mhi_register_controller(mhi_cntrl, mhi_cntrl_config); if (err) - goto err_disable_reporting; + return err; /* MHI bus does not power up the controller by default */ err = mhi_prepare_for_power_up(mhi_cntrl); @@ -941,8 +954,6 @@ err_unprepare: mhi_unprepare_after_power_down(mhi_cntrl); err_unregister: mhi_unregister_controller(mhi_cntrl); -err_disable_reporting: - pci_disable_pcie_error_reporting(pdev); return err; } @@ -965,7 +976,6 @@ static void mhi_pci_remove(struct pci_dev *pdev) pm_runtime_get_noresume(&pdev->dev); mhi_unregister_controller(mhi_cntrl); - pci_disable_pcie_error_reporting(pdev); } static void mhi_pci_shutdown(struct pci_dev *pdev) diff --git a/drivers/cdx/Kconfig b/drivers/cdx/Kconfig new file mode 100644 index 000000000000..a08958485e31 --- /dev/null +++ b/drivers/cdx/Kconfig @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# CDX bus configuration +# +# Copyright (C) 2022-2023, Advanced Micro Devices, Inc. +# + +config CDX_BUS + bool "CDX Bus driver" + depends on OF && ARM64 + help + Driver to enable Composable DMA Transfer(CDX) Bus. CDX bus + exposes Fabric devices which uses composable DMA IP to the + APU. CDX bus provides a mechanism for scanning and probing + of CDX devices. CDX devices are memory mapped on system bus + for embedded CPUs. CDX bus uses CDX controller and firmware + to scan these CDX devices. + +source "drivers/cdx/controller/Kconfig" diff --git a/drivers/cdx/Makefile b/drivers/cdx/Makefile new file mode 100644 index 000000000000..0324e4914f6e --- /dev/null +++ b/drivers/cdx/Makefile @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for CDX +# +# Copyright (C) 2022-2023, Advanced Micro Devices, Inc. +# + +obj-$(CONFIG_CDX_BUS) += cdx.o controller/ diff --git a/drivers/cdx/cdx.c b/drivers/cdx/cdx.c new file mode 100644 index 000000000000..67c32cb2c006 --- /dev/null +++ b/drivers/cdx/cdx.c @@ -0,0 +1,535 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * CDX bus driver. + * + * Copyright (C) 2022-2023, Advanced Micro Devices, Inc. + */ + +/* + * Architecture Overview + * ===================== + * CDX is a Hardware Architecture designed for AMD FPGA devices. It + * consists of sophisticated mechanism for interaction between FPGA, + * Firmware and the APUs (Application CPUs). + * + * Firmware resides on RPU (Realtime CPUs) which interacts with + * the FPGA program manager and the APUs. The RPU provides memory-mapped + * interface (RPU if) which is used to communicate with APUs. + * + * The diagram below shows an overview of the CDX architecture: + * + * +--------------------------------------+ + * | Application CPUs (APU) | + * | | + * | CDX device drivers| + * | Linux OS | | + * | CDX bus | + * | | | + * | CDX controller | + * | | | + * +-----------------------------|--------+ + * | (discover, config, + * | reset, rescan) + * | + * +------------------------| RPU if |----+ + * | | | + * | V | + * | Realtime CPUs (RPU) | + * | | + * +--------------------------------------+ + * | + * +---------------------|----------------+ + * | FPGA | | + * | +-----------------------+ | + * | | | | | + * | +-------+ +-------+ +-------+ | + * | | dev 1 | | dev 2 | | dev 3 | | + * | +-------+ +-------+ +-------+ | + * +--------------------------------------+ + * + * The RPU firmware extracts the device information from the loaded FPGA + * image and implements a mechanism that allows the APU drivers to + * enumerate such devices (device personality and resource details) via + * a dedicated communication channel. RPU mediates operations such as + * discover, reset and rescan of the FPGA devices for the APU. This is + * done using memory mapped interface provided by the RPU to APU. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/of_device.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/xarray.h> +#include <linux/cdx/cdx_bus.h> +#include "cdx.h" + +/* Default DMA mask for devices on a CDX bus */ +#define CDX_DEFAULT_DMA_MASK (~0ULL) +#define MAX_CDX_CONTROLLERS 16 + +/* CDX controllers registered with the CDX bus */ +static DEFINE_XARRAY_ALLOC(cdx_controllers); + +/** + * cdx_dev_reset - Reset a CDX device + * @dev: CDX device + * + * Return: -errno on failure, 0 on success. + */ +int cdx_dev_reset(struct device *dev) +{ + struct cdx_device *cdx_dev = to_cdx_device(dev); + struct cdx_controller *cdx = cdx_dev->cdx; + struct cdx_device_config dev_config = {0}; + struct cdx_driver *cdx_drv; + int ret; + + cdx_drv = to_cdx_driver(dev->driver); + /* Notify driver that device is being reset */ + if (cdx_drv && cdx_drv->reset_prepare) + cdx_drv->reset_prepare(cdx_dev); + + dev_config.type = CDX_DEV_RESET_CONF; + ret = cdx->ops->dev_configure(cdx, cdx_dev->bus_num, + cdx_dev->dev_num, &dev_config); + if (ret) + dev_err(dev, "cdx device reset failed\n"); + + /* Notify driver that device reset is complete */ + if (cdx_drv && cdx_drv->reset_done) + cdx_drv->reset_done(cdx_dev); + + return ret; +} +EXPORT_SYMBOL_GPL(cdx_dev_reset); + +/** + * cdx_unregister_device - Unregister a CDX device + * @dev: CDX device + * @data: This is always passed as NULL, and is not used in this API, + * but is required here as the bus_for_each_dev() API expects + * the passed function (cdx_unregister_device) to have this + * as an argument. + * + * Return: 0 on success. + */ +static int cdx_unregister_device(struct device *dev, + void *data) +{ + struct cdx_device *cdx_dev = to_cdx_device(dev); + + kfree(cdx_dev->driver_override); + cdx_dev->driver_override = NULL; + /* + * Do not free cdx_dev here as it would be freed in + * cdx_device_release() called from within put_device(). + */ + device_del(&cdx_dev->dev); + put_device(&cdx_dev->dev); + + return 0; +} + +static void cdx_unregister_devices(struct bus_type *bus) +{ + /* Reset all the devices attached to cdx bus */ + bus_for_each_dev(bus, NULL, NULL, cdx_unregister_device); +} + +/** + * cdx_match_one_device - Tell if a CDX device structure has a matching + * CDX device id structure + * @id: single CDX device id structure to match + * @dev: the CDX device structure to match against + * + * Return: matching cdx_device_id structure or NULL if there is no match. + */ +static inline const struct cdx_device_id * +cdx_match_one_device(const struct cdx_device_id *id, + const struct cdx_device *dev) +{ + /* Use vendor ID and device ID for matching */ + if ((id->vendor == CDX_ANY_ID || id->vendor == dev->vendor) && + (id->device == CDX_ANY_ID || id->device == dev->device)) + return id; + return NULL; +} + +/** + * cdx_match_id - See if a CDX device matches a given cdx_id table + * @ids: array of CDX device ID structures to search in + * @dev: the CDX device structure to match against. + * + * Used by a driver to check whether a CDX device is in its list of + * supported devices. Returns the matching cdx_device_id structure or + * NULL if there is no match. + * + * Return: matching cdx_device_id structure or NULL if there is no match. + */ +static inline const struct cdx_device_id * +cdx_match_id(const struct cdx_device_id *ids, struct cdx_device *dev) +{ + if (ids) { + while (ids->vendor || ids->device) { + if (cdx_match_one_device(ids, dev)) + return ids; + ids++; + } + } + return NULL; +} + +/** + * cdx_bus_match - device to driver matching callback + * @dev: the cdx device to match against + * @drv: the device driver to search for matching cdx device + * structures + * + * Return: true on success, false otherwise. + */ +static int cdx_bus_match(struct device *dev, struct device_driver *drv) +{ + struct cdx_device *cdx_dev = to_cdx_device(dev); + struct cdx_driver *cdx_drv = to_cdx_driver(drv); + const struct cdx_device_id *found_id = NULL; + const struct cdx_device_id *ids; + + ids = cdx_drv->match_id_table; + + /* When driver_override is set, only bind to the matching driver */ + if (cdx_dev->driver_override && strcmp(cdx_dev->driver_override, drv->name)) + return false; + + found_id = cdx_match_id(ids, cdx_dev); + if (!found_id) + return false; + + do { + /* + * In case override_only was set, enforce driver_override + * matching. + */ + if (!found_id->override_only) + return true; + if (cdx_dev->driver_override) + return true; + + ids = found_id + 1; + found_id = cdx_match_id(ids, cdx_dev); + } while (found_id); + + return false; +} + +static int cdx_probe(struct device *dev) +{ + struct cdx_driver *cdx_drv = to_cdx_driver(dev->driver); + struct cdx_device *cdx_dev = to_cdx_device(dev); + int error; + + error = cdx_drv->probe(cdx_dev); + if (error) { + dev_err_probe(dev, error, "%s failed\n", __func__); + return error; + } + + return 0; +} + +static void cdx_remove(struct device *dev) +{ + struct cdx_driver *cdx_drv = to_cdx_driver(dev->driver); + struct cdx_device *cdx_dev = to_cdx_device(dev); + + if (cdx_drv && cdx_drv->remove) + cdx_drv->remove(cdx_dev); +} + +static void cdx_shutdown(struct device *dev) +{ + struct cdx_driver *cdx_drv = to_cdx_driver(dev->driver); + struct cdx_device *cdx_dev = to_cdx_device(dev); + + if (cdx_drv && cdx_drv->shutdown) + cdx_drv->shutdown(cdx_dev); +} + +static int cdx_dma_configure(struct device *dev) +{ + struct cdx_device *cdx_dev = to_cdx_device(dev); + u32 input_id = cdx_dev->req_id; + int ret; + + ret = of_dma_configure_id(dev, dev->parent->of_node, 0, &input_id); + if (ret && ret != -EPROBE_DEFER) { + dev_err(dev, "of_dma_configure_id() failed\n"); + return ret; + } + + return 0; +} + +/* show configuration fields */ +#define cdx_config_attr(field, format_string) \ +static ssize_t \ +field##_show(struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + struct cdx_device *cdx_dev = to_cdx_device(dev); \ + return sysfs_emit(buf, format_string, cdx_dev->field); \ +} \ +static DEVICE_ATTR_RO(field) + +cdx_config_attr(vendor, "0x%04x\n"); +cdx_config_attr(device, "0x%04x\n"); + +static ssize_t remove_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + bool val; + + if (kstrtobool(buf, &val) < 0) + return -EINVAL; + + if (!val) + return -EINVAL; + + if (device_remove_file_self(dev, attr)) { + int ret; + + ret = cdx_unregister_device(dev, NULL); + if (ret) + return ret; + } + + return count; +} +static DEVICE_ATTR_WO(remove); + +static ssize_t reset_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + bool val; + int ret; + + if (kstrtobool(buf, &val) < 0) + return -EINVAL; + + if (!val) + return -EINVAL; + + ret = cdx_dev_reset(dev); + if (ret) + return ret; + + return count; +} +static DEVICE_ATTR_WO(reset); + +static ssize_t driver_override_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct cdx_device *cdx_dev = to_cdx_device(dev); + int ret; + + if (WARN_ON(dev->bus != &cdx_bus_type)) + return -EINVAL; + + ret = driver_set_override(dev, &cdx_dev->driver_override, buf, count); + if (ret) + return ret; + + return count; +} + +static ssize_t driver_override_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct cdx_device *cdx_dev = to_cdx_device(dev); + + return sysfs_emit(buf, "%s\n", cdx_dev->driver_override); +} +static DEVICE_ATTR_RW(driver_override); + +static struct attribute *cdx_dev_attrs[] = { + &dev_attr_remove.attr, + &dev_attr_reset.attr, + &dev_attr_vendor.attr, + &dev_attr_device.attr, + &dev_attr_driver_override.attr, + NULL, +}; +ATTRIBUTE_GROUPS(cdx_dev); + +static ssize_t rescan_store(struct bus_type *bus, + const char *buf, size_t count) +{ + struct cdx_controller *cdx; + unsigned long index; + bool val; + + if (kstrtobool(buf, &val) < 0) + return -EINVAL; + + if (!val) + return -EINVAL; + + /* Unregister all the devices on the bus */ + cdx_unregister_devices(&cdx_bus_type); + + /* Rescan all the devices */ + xa_for_each(&cdx_controllers, index, cdx) { + int ret; + + ret = cdx->ops->scan(cdx); + if (ret) + dev_err(cdx->dev, "cdx bus scanning failed\n"); + } + + return count; +} +static BUS_ATTR_WO(rescan); + +static struct attribute *cdx_bus_attrs[] = { + &bus_attr_rescan.attr, + NULL, +}; +ATTRIBUTE_GROUPS(cdx_bus); + +struct bus_type cdx_bus_type = { + .name = "cdx", + .match = cdx_bus_match, + .probe = cdx_probe, + .remove = cdx_remove, + .shutdown = cdx_shutdown, + .dma_configure = cdx_dma_configure, + .bus_groups = cdx_bus_groups, + .dev_groups = cdx_dev_groups, +}; +EXPORT_SYMBOL_GPL(cdx_bus_type); + +int __cdx_driver_register(struct cdx_driver *cdx_driver, + struct module *owner) +{ + int error; + + cdx_driver->driver.owner = owner; + cdx_driver->driver.bus = &cdx_bus_type; + + error = driver_register(&cdx_driver->driver); + if (error) { + pr_err("driver_register() failed for %s: %d\n", + cdx_driver->driver.name, error); + return error; + } + + return 0; +} +EXPORT_SYMBOL_GPL(__cdx_driver_register); + +void cdx_driver_unregister(struct cdx_driver *cdx_driver) +{ + driver_unregister(&cdx_driver->driver); +} +EXPORT_SYMBOL_GPL(cdx_driver_unregister); + +static void cdx_device_release(struct device *dev) +{ + struct cdx_device *cdx_dev = to_cdx_device(dev); + + kfree(cdx_dev); +} + +int cdx_device_add(struct cdx_dev_params *dev_params) +{ + struct cdx_controller *cdx = dev_params->cdx; + struct device *parent = cdx->dev; + struct cdx_device *cdx_dev; + int ret; + + cdx_dev = kzalloc(sizeof(*cdx_dev), GFP_KERNEL); + if (!cdx_dev) + return -ENOMEM; + + /* Populate resource */ + memcpy(cdx_dev->res, dev_params->res, sizeof(struct resource) * + dev_params->res_count); + cdx_dev->res_count = dev_params->res_count; + + /* Populate CDX dev params */ + cdx_dev->req_id = dev_params->req_id; + cdx_dev->vendor = dev_params->vendor; + cdx_dev->device = dev_params->device; + cdx_dev->bus_num = dev_params->bus_num; + cdx_dev->dev_num = dev_params->dev_num; + cdx_dev->cdx = dev_params->cdx; + cdx_dev->dma_mask = CDX_DEFAULT_DMA_MASK; + + /* Initialize generic device */ + device_initialize(&cdx_dev->dev); + cdx_dev->dev.parent = parent; + cdx_dev->dev.bus = &cdx_bus_type; + cdx_dev->dev.dma_mask = &cdx_dev->dma_mask; + cdx_dev->dev.release = cdx_device_release; + + /* Set Name */ + dev_set_name(&cdx_dev->dev, "cdx-%02x:%02x", + ((cdx->id << CDX_CONTROLLER_ID_SHIFT) | (cdx_dev->bus_num & CDX_BUS_NUM_MASK)), + cdx_dev->dev_num); + + ret = device_add(&cdx_dev->dev); + if (ret) { + dev_err(&cdx_dev->dev, + "cdx device add failed: %d", ret); + goto fail; + } + + return 0; +fail: + /* + * Do not free cdx_dev here as it would be freed in + * cdx_device_release() called from put_device(). + */ + put_device(&cdx_dev->dev); + + return ret; +} +EXPORT_SYMBOL_GPL(cdx_device_add); + +int cdx_register_controller(struct cdx_controller *cdx) +{ + int ret; + + ret = xa_alloc(&cdx_controllers, &cdx->id, cdx, + XA_LIMIT(0, MAX_CDX_CONTROLLERS - 1), GFP_KERNEL); + if (ret) { + dev_err(cdx->dev, + "No free index available. Maximum controllers already registered\n"); + cdx->id = (u8)MAX_CDX_CONTROLLERS; + return ret; + } + + /* Scan all the devices */ + cdx->ops->scan(cdx); + + return 0; +} +EXPORT_SYMBOL_GPL(cdx_register_controller); + +void cdx_unregister_controller(struct cdx_controller *cdx) +{ + if (cdx->id >= MAX_CDX_CONTROLLERS) + return; + + device_for_each_child(cdx->dev, NULL, cdx_unregister_device); + xa_erase(&cdx_controllers, cdx->id); +} +EXPORT_SYMBOL_GPL(cdx_unregister_controller); + +static int __init cdx_bus_init(void) +{ + return bus_register(&cdx_bus_type); +} +postcore_initcall(cdx_bus_init); diff --git a/drivers/cdx/cdx.h b/drivers/cdx/cdx.h new file mode 100644 index 000000000000..c436ac7ac86f --- /dev/null +++ b/drivers/cdx/cdx.h @@ -0,0 +1,62 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Header file for the CDX Bus + * + * Copyright (C) 2022-2023, Advanced Micro Devices, Inc. + */ + +#ifndef _CDX_H_ +#define _CDX_H_ + +#include <linux/cdx/cdx_bus.h> + +/** + * struct cdx_dev_params - CDX device parameters + * @cdx: CDX controller associated with the device + * @parent: Associated CDX controller + * @vendor: Vendor ID for CDX device + * @device: Device ID for CDX device + * @bus_num: Bus number for this CDX device + * @dev_num: Device number for this device + * @res: array of MMIO region entries + * @res_count: number of valid MMIO regions + * @req_id: Requestor ID associated with CDX device + */ +struct cdx_dev_params { + struct cdx_controller *cdx; + u16 vendor; + u16 device; + u8 bus_num; + u8 dev_num; + struct resource res[MAX_CDX_DEV_RESOURCES]; + u8 res_count; + u32 req_id; +}; + +/** + * cdx_register_controller - Register a CDX controller and its ports + * on the CDX bus. + * @cdx: The CDX controller to register + * + * Return: -errno on failure, 0 on success. + */ +int cdx_register_controller(struct cdx_controller *cdx); + +/** + * cdx_unregister_controller - Unregister a CDX controller + * @cdx: The CDX controller to unregister + */ +void cdx_unregister_controller(struct cdx_controller *cdx); + +/** + * cdx_device_add - Add a CDX device. This function adds a CDX device + * on the CDX bus as per the device parameters provided + * by caller. It also creates and registers an associated + * Linux generic device. + * @dev_params: device parameters associated with the device to be created. + * + * Return: -errno on failure, 0 on success. + */ +int cdx_device_add(struct cdx_dev_params *dev_params); + +#endif /* _CDX_H_ */ diff --git a/drivers/cdx/controller/Kconfig b/drivers/cdx/controller/Kconfig new file mode 100644 index 000000000000..c3e3b9ff8dfe --- /dev/null +++ b/drivers/cdx/controller/Kconfig @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# CDX controller configuration +# +# Copyright (C) 2022-2023, Advanced Micro Devices, Inc. +# + +if CDX_BUS + +config CDX_CONTROLLER + tristate "CDX bus controller" + select REMOTEPROC + select RPMSG + help + CDX controller drives the CDX bus. It interacts with + firmware to get the hardware devices and registers with + the CDX bus. Say Y to enable the CDX hardware driver. + + If unsure, say N. + +config MCDI_LOGGING + bool "MCDI Logging for the CDX controller" + depends on CDX_CONTROLLER + help + Enable MCDI Logging for + the CDX Controller for debug + purpose. + + If unsure, say N. + +endif diff --git a/drivers/cdx/controller/Makefile b/drivers/cdx/controller/Makefile new file mode 100644 index 000000000000..f071be411d96 --- /dev/null +++ b/drivers/cdx/controller/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Makefile for CDX controller drivers +# +# Copyright (C) 2022-2023, Advanced Micro Devices, Inc. +# + +obj-$(CONFIG_CDX_CONTROLLER) += cdx-controller.o +cdx-controller-objs := cdx_controller.o cdx_rpmsg.o mcdi.o mcdi_functions.o diff --git a/drivers/cdx/controller/bitfield.h b/drivers/cdx/controller/bitfield.h new file mode 100644 index 000000000000..567f8ec47582 --- /dev/null +++ b/drivers/cdx/controller/bitfield.h @@ -0,0 +1,90 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Copyright 2005-2006 Fen Systems Ltd. + * Copyright 2006-2013 Solarflare Communications Inc. + * Copyright (C) 2022-2023, Advanced Micro Devices, Inc. + */ + +#ifndef CDX_BITFIELD_H +#define CDX_BITFIELD_H + +#include <linux/bitfield.h> + +/* Lowest bit numbers and widths */ +#define CDX_DWORD_LBN 0 +#define CDX_DWORD_WIDTH 32 + +/* Specified attribute (e.g. LBN) of the specified field */ +#define CDX_VAL(field, attribute) field ## _ ## attribute +/* Low bit number of the specified field */ +#define CDX_LOW_BIT(field) CDX_VAL(field, LBN) +/* Bit width of the specified field */ +#define CDX_WIDTH(field) CDX_VAL(field, WIDTH) +/* High bit number of the specified field */ +#define CDX_HIGH_BIT(field) (CDX_LOW_BIT(field) + CDX_WIDTH(field) - 1) + +/* A doubleword (i.e. 4 byte) datatype - little-endian in HW */ +struct cdx_dword { + __le32 cdx_u32; +}; + +/* Value expanders for printk */ +#define CDX_DWORD_VAL(dword) \ + ((unsigned int)le32_to_cpu((dword).cdx_u32)) + +/* + * Extract bit field portion [low,high) from the 32-bit little-endian + * element which contains bits [min,max) + */ +#define CDX_DWORD_FIELD(dword, field) \ + (FIELD_GET(GENMASK(CDX_HIGH_BIT(field), CDX_LOW_BIT(field)), \ + le32_to_cpu((dword).cdx_u32))) + +/* + * Creates the portion of the named bit field that lies within the + * range [min,max). + */ +#define CDX_INSERT_FIELD(field, value) \ + (FIELD_PREP(GENMASK(CDX_HIGH_BIT(field), \ + CDX_LOW_BIT(field)), value)) + +/* + * Creates the portion of the named bit fields that lie within the + * range [min,max). + */ +#define CDX_INSERT_FIELDS(field1, value1, \ + field2, value2, \ + field3, value3, \ + field4, value4, \ + field5, value5, \ + field6, value6, \ + field7, value7) \ + (CDX_INSERT_FIELD(field1, (value1)) | \ + CDX_INSERT_FIELD(field2, (value2)) | \ + CDX_INSERT_FIELD(field3, (value3)) | \ + CDX_INSERT_FIELD(field4, (value4)) | \ + CDX_INSERT_FIELD(field5, (value5)) | \ + CDX_INSERT_FIELD(field6, (value6)) | \ + CDX_INSERT_FIELD(field7, (value7))) + +#define CDX_POPULATE_DWORD(dword, ...) \ + (dword).cdx_u32 = cpu_to_le32(CDX_INSERT_FIELDS(__VA_ARGS__)) + +/* Populate a dword field with various numbers of arguments */ +#define CDX_POPULATE_DWORD_7 CDX_POPULATE_DWORD +#define CDX_POPULATE_DWORD_6(dword, ...) \ + CDX_POPULATE_DWORD_7(dword, CDX_DWORD, 0, __VA_ARGS__) +#define CDX_POPULATE_DWORD_5(dword, ...) \ + CDX_POPULATE_DWORD_6(dword, CDX_DWORD, 0, __VA_ARGS__) +#define CDX_POPULATE_DWORD_4(dword, ...) \ + CDX_POPULATE_DWORD_5(dword, CDX_DWORD, 0, __VA_ARGS__) +#define CDX_POPULATE_DWORD_3(dword, ...) \ + CDX_POPULATE_DWORD_4(dword, CDX_DWORD, 0, __VA_ARGS__) +#define CDX_POPULATE_DWORD_2(dword, ...) \ + CDX_POPULATE_DWORD_3(dword, CDX_DWORD, 0, __VA_ARGS__) +#define CDX_POPULATE_DWORD_1(dword, ...) \ + CDX_POPULATE_DWORD_2(dword, CDX_DWORD, 0, __VA_ARGS__) +#define CDX_SET_DWORD(dword) \ + CDX_POPULATE_DWORD_1(dword, CDX_DWORD, 0xffffffff) + +#endif /* CDX_BITFIELD_H */ diff --git a/drivers/cdx/controller/cdx_controller.c b/drivers/cdx/controller/cdx_controller.c new file mode 100644 index 000000000000..dc52f95f8978 --- /dev/null +++ b/drivers/cdx/controller/cdx_controller.c @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * CDX host controller driver for AMD versal-net platform. + * + * Copyright (C) 2022-2023, Advanced Micro Devices, Inc. + */ + +#include <linux/of_platform.h> +#include <linux/slab.h> +#include <linux/cdx/cdx_bus.h> + +#include "cdx_controller.h" +#include "../cdx.h" +#include "mcdi_functions.h" +#include "mcdi.h" + +static unsigned int cdx_mcdi_rpc_timeout(struct cdx_mcdi *cdx, unsigned int cmd) +{ + return MCDI_RPC_TIMEOUT; +} + +static void cdx_mcdi_request(struct cdx_mcdi *cdx, + const struct cdx_dword *hdr, size_t hdr_len, + const struct cdx_dword *sdu, size_t sdu_len) +{ + if (cdx_rpmsg_send(cdx, hdr, hdr_len, sdu, sdu_len)) + dev_err(&cdx->rpdev->dev, "Failed to send rpmsg data\n"); +} + +static const struct cdx_mcdi_ops mcdi_ops = { + .mcdi_rpc_timeout = cdx_mcdi_rpc_timeout, + .mcdi_request = cdx_mcdi_request, +}; + +void cdx_rpmsg_post_probe(struct cdx_controller *cdx) +{ + /* Register CDX controller with CDX bus driver */ + if (cdx_register_controller(cdx)) + dev_err(cdx->dev, "Failed to register CDX controller\n"); +} + +void cdx_rpmsg_pre_remove(struct cdx_controller *cdx) +{ + cdx_unregister_controller(cdx); + cdx_mcdi_wait_for_quiescence(cdx->priv, MCDI_RPC_TIMEOUT); +} + +static int cdx_configure_device(struct cdx_controller *cdx, + u8 bus_num, u8 dev_num, + struct cdx_device_config *dev_config) +{ + int ret = 0; + + switch (dev_config->type) { + case CDX_DEV_RESET_CONF: + ret = cdx_mcdi_reset_device(cdx->priv, bus_num, dev_num); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int cdx_scan_devices(struct cdx_controller *cdx) +{ + struct cdx_mcdi *cdx_mcdi = cdx->priv; + u8 bus_num, dev_num, num_cdx_bus; + int ret; + + /* MCDI FW Read: Fetch the number of CDX buses on this controller */ + ret = cdx_mcdi_get_num_buses(cdx_mcdi); + if (ret < 0) { + dev_err(cdx->dev, + "Get number of CDX buses failed: %d\n", ret); + return ret; + } + num_cdx_bus = (u8)ret; + + for (bus_num = 0; bus_num < num_cdx_bus; bus_num++) { + u8 num_cdx_dev; + + /* MCDI FW Read: Fetch the number of devices present */ + ret = cdx_mcdi_get_num_devs(cdx_mcdi, bus_num); + if (ret < 0) { + dev_err(cdx->dev, + "Get devices on CDX bus %d failed: %d\n", bus_num, ret); + continue; + } + num_cdx_dev = (u8)ret; + + for (dev_num = 0; dev_num < num_cdx_dev; dev_num++) { + struct cdx_dev_params dev_params; + + /* MCDI FW: Get the device config */ + ret = cdx_mcdi_get_dev_config(cdx_mcdi, bus_num, + dev_num, &dev_params); + if (ret) { + dev_err(cdx->dev, + "CDX device config get failed for %d(bus):%d(dev), %d\n", + bus_num, dev_num, ret); + continue; + } + dev_params.cdx = cdx; + + /* Add the device to the cdx bus */ + ret = cdx_device_add(&dev_params); + if (ret) { + dev_err(cdx->dev, "registering cdx dev: %d failed: %d\n", + dev_num, ret); + continue; + } + + dev_dbg(cdx->dev, "CDX dev: %d on cdx bus: %d created\n", + dev_num, bus_num); + } + } + + return 0; +} + +static struct cdx_ops cdx_ops = { + .scan = cdx_scan_devices, + .dev_configure = cdx_configure_device, +}; + +static int xlnx_cdx_probe(struct platform_device *pdev) +{ + struct cdx_controller *cdx; + struct cdx_mcdi *cdx_mcdi; + int ret; + + cdx_mcdi = kzalloc(sizeof(*cdx_mcdi), GFP_KERNEL); + if (!cdx_mcdi) + return -ENOMEM; + + /* Store the MCDI ops */ + cdx_mcdi->mcdi_ops = &mcdi_ops; + /* MCDI FW: Initialize the FW path */ + ret = cdx_mcdi_init(cdx_mcdi); + if (ret) { + dev_err_probe(&pdev->dev, ret, "MCDI Initialization failed\n"); + goto mcdi_init_fail; + } + + cdx = kzalloc(sizeof(*cdx), GFP_KERNEL); + if (!cdx) { + ret = -ENOMEM; + goto cdx_alloc_fail; + } + platform_set_drvdata(pdev, cdx); + + cdx->dev = &pdev->dev; + cdx->priv = cdx_mcdi; + cdx->ops = &cdx_ops; + + ret = cdx_setup_rpmsg(pdev); + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "Failed to register CDX RPMsg transport\n"); + goto cdx_rpmsg_fail; + } + + dev_info(&pdev->dev, "Successfully registered CDX controller with RPMsg as transport\n"); + return 0; + +cdx_rpmsg_fail: + kfree(cdx); +cdx_alloc_fail: + cdx_mcdi_finish(cdx_mcdi); +mcdi_init_fail: + kfree(cdx_mcdi); + + return ret; +} + +static int xlnx_cdx_remove(struct platform_device *pdev) +{ + struct cdx_controller *cdx = platform_get_drvdata(pdev); + struct cdx_mcdi *cdx_mcdi = cdx->priv; + + cdx_destroy_rpmsg(pdev); + + kfree(cdx); + + cdx_mcdi_finish(cdx_mcdi); + kfree(cdx_mcdi); + + return 0; +} + +static const struct of_device_id cdx_match_table[] = { + {.compatible = "xlnx,versal-net-cdx",}, + { }, +}; + +MODULE_DEVICE_TABLE(of, cdx_match_table); + +static struct platform_driver cdx_pdriver = { + .driver = { + .name = "cdx-controller", + .pm = NULL, + .of_match_table = cdx_match_table, + }, + .probe = xlnx_cdx_probe, + .remove = xlnx_cdx_remove, +}; + +static int __init cdx_controller_init(void) +{ + int ret; + + ret = platform_driver_register(&cdx_pdriver); + if (ret) + pr_err("platform_driver_register() failed: %d\n", ret); + + return ret; +} + +static void __exit cdx_controller_exit(void) +{ + platform_driver_unregister(&cdx_pdriver); +} + +module_init(cdx_controller_init); +module_exit(cdx_controller_exit); + +MODULE_AUTHOR("AMD Inc."); +MODULE_DESCRIPTION("CDX controller for AMD devices"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cdx/controller/cdx_controller.h b/drivers/cdx/controller/cdx_controller.h new file mode 100644 index 000000000000..43b7c742df87 --- /dev/null +++ b/drivers/cdx/controller/cdx_controller.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Header file for the CDX Controller + * + * Copyright (C) 2022-2023, Advanced Micro Devices, Inc. + */ + +#ifndef _CDX_CONTROLLER_H_ +#define _CDX_CONTROLLER_H_ + +#include <linux/cdx/cdx_bus.h> +#include "mcdi_functions.h" + +void cdx_rpmsg_post_probe(struct cdx_controller *cdx); + +void cdx_rpmsg_pre_remove(struct cdx_controller *cdx); + +int cdx_rpmsg_send(struct cdx_mcdi *cdx_mcdi, + const struct cdx_dword *hdr, size_t hdr_len, + const struct cdx_dword *sdu, size_t sdu_len); + +void cdx_rpmsg_read_resp(struct cdx_mcdi *cdx_mcdi, + struct cdx_dword *outbuf, size_t offset, + size_t outlen); + +int cdx_setup_rpmsg(struct platform_device *pdev); + +void cdx_destroy_rpmsg(struct platform_device *pdev); + +#endif /* _CDX_CONT_PRIV_H_ */ diff --git a/drivers/cdx/controller/cdx_rpmsg.c b/drivers/cdx/controller/cdx_rpmsg.c new file mode 100644 index 000000000000..f37e639d6ce3 --- /dev/null +++ b/drivers/cdx/controller/cdx_rpmsg.c @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Platform driver for CDX bus. + * + * Copyright (C) 2022-2023, Advanced Micro Devices, Inc. + */ + +#include <linux/rpmsg.h> +#include <linux/remoteproc.h> +#include <linux/of_platform.h> +#include <linux/cdx/cdx_bus.h> +#include <linux/module.h> + +#include "../cdx.h" +#include "cdx_controller.h" +#include "mcdi_functions.h" +#include "mcdi.h" + +static struct rpmsg_device_id cdx_rpmsg_id_table[] = { + { .name = "mcdi_ipc" }, + { }, +}; +MODULE_DEVICE_TABLE(rpmsg, cdx_rpmsg_id_table); + +int cdx_rpmsg_send(struct cdx_mcdi *cdx_mcdi, + const struct cdx_dword *hdr, size_t hdr_len, + const struct cdx_dword *sdu, size_t sdu_len) +{ + unsigned char *send_buf; + int ret; + + send_buf = kzalloc(hdr_len + sdu_len, GFP_KERNEL); + if (!send_buf) + return -ENOMEM; + + memcpy(send_buf, hdr, hdr_len); + memcpy(send_buf + hdr_len, sdu, sdu_len); + + ret = rpmsg_send(cdx_mcdi->ept, send_buf, hdr_len + sdu_len); + kfree(send_buf); + + return ret; +} + +static int cdx_attach_to_rproc(struct platform_device *pdev) +{ + struct device_node *r5_core_node; + struct cdx_controller *cdx_c; + struct cdx_mcdi *cdx_mcdi; + struct device *dev; + struct rproc *rp; + int ret; + + dev = &pdev->dev; + cdx_c = platform_get_drvdata(pdev); + cdx_mcdi = cdx_c->priv; + + r5_core_node = of_parse_phandle(dev->of_node, "xlnx,rproc", 0); + if (!r5_core_node) { + dev_err(&pdev->dev, "xlnx,rproc: invalid phandle\n"); + return -EINVAL; + } + + rp = rproc_get_by_phandle(r5_core_node->phandle); + if (!rp) { + ret = -EPROBE_DEFER; + goto pdev_err; + } + + /* Attach to remote processor */ + ret = rproc_boot(rp); + if (ret) { + dev_err(&pdev->dev, "Failed to attach to remote processor\n"); + rproc_put(rp); + goto pdev_err; + } + + cdx_mcdi->r5_rproc = rp; +pdev_err: + of_node_put(r5_core_node); + return ret; +} + +static void cdx_detach_to_r5(struct platform_device *pdev) +{ + struct cdx_controller *cdx_c; + struct cdx_mcdi *cdx_mcdi; + + cdx_c = platform_get_drvdata(pdev); + cdx_mcdi = cdx_c->priv; + + rproc_detach(cdx_mcdi->r5_rproc); + rproc_put(cdx_mcdi->r5_rproc); +} + +static int cdx_rpmsg_cb(struct rpmsg_device *rpdev, void *data, + int len, void *priv, u32 src) +{ + struct cdx_controller *cdx_c = dev_get_drvdata(&rpdev->dev); + struct cdx_mcdi *cdx_mcdi = cdx_c->priv; + + if (len > MCDI_BUF_LEN) + return -EINVAL; + + cdx_mcdi_process_cmd(cdx_mcdi, (struct cdx_dword *)data, len); + + return 0; +} + +static void cdx_rpmsg_post_probe_work(struct work_struct *work) +{ + struct cdx_controller *cdx_c; + struct cdx_mcdi *cdx_mcdi; + + cdx_mcdi = container_of(work, struct cdx_mcdi, work); + cdx_c = dev_get_drvdata(&cdx_mcdi->rpdev->dev); + cdx_rpmsg_post_probe(cdx_c); +} + +static int cdx_rpmsg_probe(struct rpmsg_device *rpdev) +{ + struct rpmsg_channel_info chinfo = {0}; + struct cdx_controller *cdx_c; + struct cdx_mcdi *cdx_mcdi; + + cdx_c = (struct cdx_controller *)cdx_rpmsg_id_table[0].driver_data; + cdx_mcdi = cdx_c->priv; + + chinfo.src = RPMSG_ADDR_ANY; + chinfo.dst = rpdev->dst; + strscpy(chinfo.name, cdx_rpmsg_id_table[0].name, + strlen(cdx_rpmsg_id_table[0].name)); + + cdx_mcdi->ept = rpmsg_create_ept(rpdev, cdx_rpmsg_cb, NULL, chinfo); + if (!cdx_mcdi->ept) { + dev_err_probe(&rpdev->dev, -ENXIO, + "Failed to create ept for channel %s\n", + chinfo.name); + return -EINVAL; + } + + cdx_mcdi->rpdev = rpdev; + dev_set_drvdata(&rpdev->dev, cdx_c); + + schedule_work(&cdx_mcdi->work); + return 0; +} + +static void cdx_rpmsg_remove(struct rpmsg_device *rpdev) +{ + struct cdx_controller *cdx_c = dev_get_drvdata(&rpdev->dev); + struct cdx_mcdi *cdx_mcdi = cdx_c->priv; + + flush_work(&cdx_mcdi->work); + cdx_rpmsg_pre_remove(cdx_c); + + rpmsg_destroy_ept(cdx_mcdi->ept); + dev_set_drvdata(&rpdev->dev, NULL); +} + +static struct rpmsg_driver cdx_rpmsg_driver = { + .drv.name = KBUILD_MODNAME, + .id_table = cdx_rpmsg_id_table, + .probe = cdx_rpmsg_probe, + .remove = cdx_rpmsg_remove, + .callback = cdx_rpmsg_cb, +}; + +int cdx_setup_rpmsg(struct platform_device *pdev) +{ + struct cdx_controller *cdx_c; + struct cdx_mcdi *cdx_mcdi; + int ret; + + /* Attach to remote processor */ + ret = cdx_attach_to_rproc(pdev); + if (ret) + return ret; + + cdx_c = platform_get_drvdata(pdev); + cdx_mcdi = cdx_c->priv; + + /* Register RPMsg driver */ + cdx_rpmsg_id_table[0].driver_data = (kernel_ulong_t)cdx_c; + + INIT_WORK(&cdx_mcdi->work, cdx_rpmsg_post_probe_work); + ret = register_rpmsg_driver(&cdx_rpmsg_driver); + if (ret) { + dev_err(&pdev->dev, + "Failed to register cdx RPMsg driver: %d\n", ret); + cdx_detach_to_r5(pdev); + } + + return ret; +} + +void cdx_destroy_rpmsg(struct platform_device *pdev) +{ + unregister_rpmsg_driver(&cdx_rpmsg_driver); + + cdx_detach_to_r5(pdev); +} diff --git a/drivers/cdx/controller/mc_cdx_pcol.h b/drivers/cdx/controller/mc_cdx_pcol.h new file mode 100644 index 000000000000..4ccb7b52951b --- /dev/null +++ b/drivers/cdx/controller/mc_cdx_pcol.h @@ -0,0 +1,590 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Driver for AMD network controllers and boards + * + * Copyright (C) 2021, Xilinx, Inc. + * Copyright (C) 2022-2023, Advanced Micro Devices, Inc. + */ + +#ifndef MC_CDX_PCOL_H +#define MC_CDX_PCOL_H + +/* The current version of the MCDI protocol. */ +#define MCDI_PCOL_VERSION 2 + +/* + * Each MCDI request starts with an MCDI_HEADER, which is a 32bit + * structure, filled in by the client. + * + * 0 7 8 16 20 22 23 24 31 + * | CODE | R | LEN | SEQ | Rsvd | E | R | XFLAGS | + * | | | + * | | \--- Response + * | \------- Error + * \------------------------------ Resync (always set) + * + * The client writes its request into MC shared memory, and rings the + * doorbell. Each request is completed either by the MC writing + * back into shared memory, or by writing out an event. + * + * All MCDI commands support completion by shared memory response. Each + * request may also contain additional data (accounted for by HEADER.LEN), + * and some responses may also contain additional data (again, accounted + * for by HEADER.LEN). + * + * Some MCDI commands support completion by event, in which any associated + * response data is included in the event. + * + * The protocol requires one response to be delivered for every request; a + * request should not be sent unless the response for the previous request + * has been received (either by polling shared memory, or by receiving + * an event). + */ + +/** Request/Response structure */ +#define MCDI_HEADER_OFST 0 +#define MCDI_HEADER_CODE_LBN 0 +#define MCDI_HEADER_CODE_WIDTH 7 +#define MCDI_HEADER_RESYNC_LBN 7 +#define MCDI_HEADER_RESYNC_WIDTH 1 +#define MCDI_HEADER_DATALEN_LBN 8 +#define MCDI_HEADER_DATALEN_WIDTH 8 +#define MCDI_HEADER_SEQ_LBN 16 +#define MCDI_HEADER_SEQ_WIDTH 4 +#define MCDI_HEADER_RSVD_LBN 20 +#define MCDI_HEADER_RSVD_WIDTH 1 +#define MCDI_HEADER_NOT_EPOCH_LBN 21 +#define MCDI_HEADER_NOT_EPOCH_WIDTH 1 +#define MCDI_HEADER_ERROR_LBN 22 +#define MCDI_HEADER_ERROR_WIDTH 1 +#define MCDI_HEADER_RESPONSE_LBN 23 +#define MCDI_HEADER_RESPONSE_WIDTH 1 +#define MCDI_HEADER_XFLAGS_LBN 24 +#define MCDI_HEADER_XFLAGS_WIDTH 8 +/* Request response using event */ +#define MCDI_HEADER_XFLAGS_EVREQ 0x01 +/* Request (and signal) early doorbell return */ +#define MCDI_HEADER_XFLAGS_DBRET 0x02 + +/* Maximum number of payload bytes */ +#define MCDI_CTL_SDU_LEN_MAX_V2 0x400 + +#define MCDI_CTL_SDU_LEN_MAX MCDI_CTL_SDU_LEN_MAX_V2 + +/* + * The MC can generate events for two reasons: + * - To advance a shared memory request if XFLAGS_EVREQ was set + * - As a notification (link state, i2c event), controlled + * via MC_CMD_LOG_CTRL + * + * Both events share a common structure: + * + * 0 32 33 36 44 52 60 + * | Data | Cont | Level | Src | Code | Rsvd | + * | + * \ There is another event pending in this notification + * + * If Code==CMDDONE, then the fields are further interpreted as: + * + * - LEVEL==INFO Command succeeded + * - LEVEL==ERR Command failed + * + * 0 8 16 24 32 + * | Seq | Datalen | Errno | Rsvd | + * + * These fields are taken directly out of the standard MCDI header, i.e., + * LEVEL==ERR, Datalen == 0 => Reboot + * + * Events can be squirted out of the UART (using LOG_CTRL) without a + * MCDI header. An event can be distinguished from a MCDI response by + * examining the first byte which is 0xc0. This corresponds to the + * non-existent MCDI command MC_CMD_DEBUG_LOG. + * + * 0 7 8 + * | command | Resync | = 0xc0 + * + * Since the event is written in big-endian byte order, this works + * providing bits 56-63 of the event are 0xc0. + * + * 56 60 63 + * | Rsvd | Code | = 0xc0 + * + * Which means for convenience the event code is 0xc for all MC + * generated events. + */ + +/* + * the errno value may be followed by the (0-based) number of the + * first argument that could not be processed. + */ +#define MC_CMD_ERR_ARG_OFST 4 + +/* MC_CMD_ERR MCDI error codes. */ +/* Operation not permitted. */ +#define MC_CMD_ERR_EPERM 0x1 +/* Non-existent command target */ +#define MC_CMD_ERR_ENOENT 0x2 +/* assert() has killed the MC */ +#define MC_CMD_ERR_EINTR 0x4 +/* I/O failure */ +#define MC_CMD_ERR_EIO 0x5 +/* Already exists */ +#define MC_CMD_ERR_EEXIST 0x6 +/* Try again */ +#define MC_CMD_ERR_EAGAIN 0xb +/* Out of memory */ +#define MC_CMD_ERR_ENOMEM 0xc +/* Caller does not hold required locks */ +#define MC_CMD_ERR_EACCES 0xd +/* Resource is currently unavailable (e.g. lock contention) */ +#define MC_CMD_ERR_EBUSY 0x10 +/* No such device */ +#define MC_CMD_ERR_ENODEV 0x13 +/* Invalid argument to target */ +#define MC_CMD_ERR_EINVAL 0x16 +/* No space */ +#define MC_CMD_ERR_ENOSPC 0x1c +/* Read-only */ +#define MC_CMD_ERR_EROFS 0x1e +/* Broken pipe */ +#define MC_CMD_ERR_EPIPE 0x20 +/* Out of range */ +#define MC_CMD_ERR_ERANGE 0x22 +/* Non-recursive resource is already acquired */ +#define MC_CMD_ERR_EDEADLK 0x23 +/* Operation not implemented */ +#define MC_CMD_ERR_ENOSYS 0x26 +/* Operation timed out */ +#define MC_CMD_ERR_ETIME 0x3e +/* Link has been severed */ +#define MC_CMD_ERR_ENOLINK 0x43 +/* Protocol error */ +#define MC_CMD_ERR_EPROTO 0x47 +/* Bad message */ +#define MC_CMD_ERR_EBADMSG 0x4a +/* Operation not supported */ +#define MC_CMD_ERR_ENOTSUP 0x5f +/* Address not available */ +#define MC_CMD_ERR_EADDRNOTAVAIL 0x63 +/* Not connected */ +#define MC_CMD_ERR_ENOTCONN 0x6b +/* Operation already in progress */ +#define MC_CMD_ERR_EALREADY 0x72 +/* Stale handle. The handle references resource that no longer exists */ +#define MC_CMD_ERR_ESTALE 0x74 +/* Resource allocation failed. */ +#define MC_CMD_ERR_ALLOC_FAIL 0x1000 +/* V-adaptor not found. */ +#define MC_CMD_ERR_NO_VADAPTOR 0x1001 +/* EVB port not found. */ +#define MC_CMD_ERR_NO_EVB_PORT 0x1002 +/* V-switch not found. */ +#define MC_CMD_ERR_NO_VSWITCH 0x1003 +/* Too many VLAN tags. */ +#define MC_CMD_ERR_VLAN_LIMIT 0x1004 +/* Bad PCI function number. */ +#define MC_CMD_ERR_BAD_PCI_FUNC 0x1005 +/* Invalid VLAN mode. */ +#define MC_CMD_ERR_BAD_VLAN_MODE 0x1006 +/* Invalid v-switch type. */ +#define MC_CMD_ERR_BAD_VSWITCH_TYPE 0x1007 +/* Invalid v-port type. */ +#define MC_CMD_ERR_BAD_VPORT_TYPE 0x1008 +/* MAC address exists. */ +#define MC_CMD_ERR_MAC_EXIST 0x1009 +/* Slave core not present */ +#define MC_CMD_ERR_SLAVE_NOT_PRESENT 0x100a +/* The datapath is disabled. */ +#define MC_CMD_ERR_DATAPATH_DISABLED 0x100b +/* The requesting client is not a function */ +#define MC_CMD_ERR_CLIENT_NOT_FN 0x100c +/* + * The requested operation might require the command to be passed between + * MCs, and the transport doesn't support that. Should only ever been seen over + * the UART. + */ +#define MC_CMD_ERR_NO_PRIVILEGE 0x1013 +/* + * Workaround 26807 could not be turned on/off because some functions + * have already installed filters. See the comment at + * MC_CMD_WORKAROUND_BUG26807. May also returned for other operations such as + * sub-variant switching. + */ +#define MC_CMD_ERR_FILTERS_PRESENT 0x1014 +/* The clock whose frequency you've attempted to set doesn't exist */ +#define MC_CMD_ERR_NO_CLOCK 0x1015 +/* + * Returned by MC_CMD_TESTASSERT if the action that should have caused an + * assertion failed to do so. + */ +#define MC_CMD_ERR_UNREACHABLE 0x1016 +/* + * This command needs to be processed in the background but there were no + * resources to do so. Send it again after a command has completed. + */ +#define MC_CMD_ERR_QUEUE_FULL 0x1017 +/* + * The operation could not be completed because the PCIe link has gone + * away. This error code is never expected to be returned over the TLP + * transport. + */ +#define MC_CMD_ERR_NO_PCIE 0x1018 +/* + * The operation could not be completed because the datapath has gone + * away. This is distinct from MC_CMD_ERR_DATAPATH_DISABLED in that the + * datapath absence may be temporary + */ +#define MC_CMD_ERR_NO_DATAPATH 0x1019 +/* The operation could not complete because some VIs are allocated */ +#define MC_CMD_ERR_VIS_PRESENT 0x101a +/* + * The operation could not complete because some PIO buffers are + * allocated + */ +#define MC_CMD_ERR_PIOBUFS_PRESENT 0x101b + +/***********************************/ +/* + * MC_CMD_CDX_BUS_ENUM_BUSES + * CDX bus hosts devices (functions) that are implemented using the Composable + * DMA subsystem and directly mapped into the memory space of the FGPA PSX + * Application Processors (APUs). As such, they only apply to the PSX APU side, + * not the host (PCIe). Unlike PCIe, these devices have no native configuration + * space or enumeration mechanism, so this message set provides a minimal + * interface for discovery and management (bus reset, FLR, BME) of such + * devices. This command returns the number of CDX buses present in the system. + */ +#define MC_CMD_CDX_BUS_ENUM_BUSES 0x1 +#define MC_CMD_CDX_BUS_ENUM_BUSES_MSGSET 0x1 +#undef MC_CMD_0x1_PRIVILEGE_CTG + +#define MC_CMD_0x1_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_CDX_BUS_ENUM_BUSES_IN msgrequest */ +#define MC_CMD_CDX_BUS_ENUM_BUSES_IN_LEN 0 + +/* MC_CMD_CDX_BUS_ENUM_BUSES_OUT msgresponse */ +#define MC_CMD_CDX_BUS_ENUM_BUSES_OUT_LEN 4 +/* + * Number of CDX buses present in the system. Buses are numbered 0 to + * BUS_COUNT-1 + */ +#define MC_CMD_CDX_BUS_ENUM_BUSES_OUT_BUS_COUNT_OFST 0 +#define MC_CMD_CDX_BUS_ENUM_BUSES_OUT_BUS_COUNT_LEN 4 + +/***********************************/ +/* + * MC_CMD_CDX_BUS_ENUM_DEVICES + * Enumerate CDX bus devices on a given bus + */ +#define MC_CMD_CDX_BUS_ENUM_DEVICES 0x2 +#define MC_CMD_CDX_BUS_ENUM_DEVICES_MSGSET 0x2 +#undef MC_CMD_0x2_PRIVILEGE_CTG + +#define MC_CMD_0x2_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_CDX_BUS_ENUM_DEVICES_IN msgrequest */ +#define MC_CMD_CDX_BUS_ENUM_DEVICES_IN_LEN 4 +/* + * Bus number to enumerate, in range 0 to BUS_COUNT-1, as returned by + * MC_CMD_CDX_BUS_ENUM_BUSES_OUT + */ +#define MC_CMD_CDX_BUS_ENUM_DEVICES_IN_BUS_OFST 0 +#define MC_CMD_CDX_BUS_ENUM_DEVICES_IN_BUS_LEN 4 + +/* MC_CMD_CDX_BUS_ENUM_DEVICES_OUT msgresponse */ +#define MC_CMD_CDX_BUS_ENUM_DEVICES_OUT_LEN 4 +/* + * Number of devices present on the bus. Devices on the bus are numbered 0 to + * DEVICE_COUNT-1. Returns EAGAIN if number of devices unknown or if the target + * devices are not ready (e.g. undergoing a bus reset) + */ +#define MC_CMD_CDX_BUS_ENUM_DEVICES_OUT_DEVICE_COUNT_OFST 0 +#define MC_CMD_CDX_BUS_ENUM_DEVICES_OUT_DEVICE_COUNT_LEN 4 + +/***********************************/ +/* + * MC_CMD_CDX_BUS_GET_DEVICE_CONFIG + * Returns device identification and MMIO/MSI resource data for a CDX device. + * The expected usage is for the caller to first retrieve the number of devices + * on the bus using MC_CMD_BUS_ENUM_DEVICES, then loop through the range (0, + * DEVICE_COUNT - 1), retrieving device resource data. May return EAGAIN if the + * number of exposed devices or device resources change during enumeration (due + * to e.g. a PL reload / bus reset), in which case the caller is expected to + * restart the enumeration loop. MMIO addresses are specified in terms of bus + * addresses (prior to any potential IOMMU translation). For versal-net, these + * are equivalent to APU physical addresses. Implementation note - for this to + * work, the implementation needs to keep state (generation count) per client. + */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG 0x3 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_MSGSET 0x3 +#undef MC_CMD_0x3_PRIVILEGE_CTG + +#define MC_CMD_0x3_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN msgrequest */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN_LEN 8 +/* Device bus number, in range 0 to BUS_COUNT-1 */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN_BUS_OFST 0 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN_BUS_LEN 4 +/* Device number relative to the bus, in range 0 to DEVICE_COUNT-1 for that bus */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN_DEVICE_OFST 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN_DEVICE_LEN 4 + +/* MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT msgresponse */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_LEN 88 +/* 16-bit Vendor identifier, compliant with PCI-SIG VendorID assignment. */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_VENDOR_ID_OFST 0 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_VENDOR_ID_LEN 2 +/* 16-bit Device ID assigned by the vendor */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_ID_OFST 2 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_ID_LEN 2 +/* + * 16-bit Subsystem Vendor ID, , compliant with PCI-SIG VendorID assignment. + * For further device differentiation, as required. 0 if unused. + */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_SUBSYS_VENDOR_ID_OFST 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_SUBSYS_VENDOR_ID_LEN 2 +/* + * 16-bit Subsystem Device ID assigned by the vendor. For further device + * differentiation, as required. 0 if unused. + */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_SUBSYS_DEVICE_ID_OFST 6 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_SUBSYS_DEVICE_ID_LEN 2 +/* 24-bit Device Class code, compliant with PCI-SIG Device Class codes */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_CLASS_OFST 8 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_CLASS_LEN 3 +/* 8-bit vendor-assigned revision */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_REVISION_OFST 11 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_REVISION_LEN 1 +/* Reserved (alignment) */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_RESERVED_OFST 12 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_RESERVED_LEN 4 +/* MMIO region 0 base address (bus address), 0 if unused */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_OFST 16 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_LEN 8 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_LO_OFST 16 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_LO_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_LO_LBN 128 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_LO_WIDTH 32 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_HI_OFST 20 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_HI_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_HI_LBN 160 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_HI_WIDTH 32 +/* MMIO region 0 size, 0 if unused */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_OFST 24 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_LEN 8 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_LO_OFST 24 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_LO_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_LO_LBN 192 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_LO_WIDTH 32 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_HI_OFST 28 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_HI_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_HI_LBN 224 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_HI_WIDTH 32 +/* MMIO region 1 base address (bus address), 0 if unused */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_OFST 32 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_LEN 8 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_LO_OFST 32 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_LO_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_LO_LBN 256 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_LO_WIDTH 32 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_HI_OFST 36 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_HI_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_HI_LBN 288 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_HI_WIDTH 32 +/* MMIO region 1 size, 0 if unused */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_OFST 40 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_LEN 8 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_LO_OFST 40 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_LO_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_LO_LBN 320 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_LO_WIDTH 32 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_HI_OFST 44 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_HI_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_HI_LBN 352 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_HI_WIDTH 32 +/* MMIO region 2 base address (bus address), 0 if unused */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_OFST 48 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_LEN 8 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_LO_OFST 48 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_LO_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_LO_LBN 384 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_LO_WIDTH 32 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_HI_OFST 52 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_HI_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_HI_LBN 416 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_HI_WIDTH 32 +/* MMIO region 2 size, 0 if unused */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_OFST 56 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_LEN 8 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_LO_OFST 56 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_LO_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_LO_LBN 448 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_LO_WIDTH 32 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_HI_OFST 60 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_HI_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_HI_LBN 480 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_HI_WIDTH 32 +/* MMIO region 3 base address (bus address), 0 if unused */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_OFST 64 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_LEN 8 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_LO_OFST 64 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_LO_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_LO_LBN 512 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_LO_WIDTH 32 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_HI_OFST 68 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_HI_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_HI_LBN 544 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_HI_WIDTH 32 +/* MMIO region 3 size, 0 if unused */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_OFST 72 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_LEN 8 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_LO_OFST 72 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_LO_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_LO_LBN 576 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_LO_WIDTH 32 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_HI_OFST 76 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_HI_LEN 4 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_HI_LBN 608 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_HI_WIDTH 32 +/* MSI vector count */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MSI_COUNT_OFST 80 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MSI_COUNT_LEN 4 +/* Requester ID used by device (SMMU StreamID, GIC ITS DeviceID) */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_REQUESTER_ID_OFST 84 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_REQUESTER_ID_LEN 4 + +/***********************************/ +/* + * MC_CMD_CDX_DEVICE_RESET + * After this call completes, device DMA and interrupts are quiesced, devices + * logic is reset in a hardware-specific way and DMA bus mastering is disabled. + */ +#define MC_CMD_CDX_DEVICE_RESET 0x6 +#define MC_CMD_CDX_DEVICE_RESET_MSGSET 0x6 +#undef MC_CMD_0x6_PRIVILEGE_CTG + +#define MC_CMD_0x6_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_CDX_DEVICE_RESET_IN msgrequest */ +#define MC_CMD_CDX_DEVICE_RESET_IN_LEN 8 +/* Device bus number, in range 0 to BUS_COUNT-1 */ +#define MC_CMD_CDX_DEVICE_RESET_IN_BUS_OFST 0 +#define MC_CMD_CDX_DEVICE_RESET_IN_BUS_LEN 4 +/* Device number relative to the bus, in range 0 to DEVICE_COUNT-1 for that bus */ +#define MC_CMD_CDX_DEVICE_RESET_IN_DEVICE_OFST 4 +#define MC_CMD_CDX_DEVICE_RESET_IN_DEVICE_LEN 4 + +/* + * MC_CMD_CDX_DEVICE_RESET_OUT msgresponse: The device is quiesced and all + * pending device initiated DMA has completed. + */ +#define MC_CMD_CDX_DEVICE_RESET_OUT_LEN 0 + +/***********************************/ +/* + * MC_CMD_CDX_DEVICE_CONTROL_SET + * If BUS_MASTER is set to disabled, device DMA and interrupts are quiesced. + * Pending DMA requests and MSI interrupts are flushed and no further DMA or + * interrupts are issued after this command returns. If BUS_MASTER is set to + * enabled, device is allowed to initiate DMA. Whether interrupts are enabled + * also depends on the value of MSI_ENABLE bit. Note that, in this case, the + * device may start DMA before the host receives and processes the MCDI + * response. MSI_ENABLE masks or unmasks device interrupts only. Note that for + * interrupts to be delivered to the host, both BUS_MASTER and MSI_ENABLE needs + * to be set. MMIO_REGIONS_ENABLE enables or disables host accesses to device + * MMIO regions. Note that an implementation is allowed to permanently set this + * bit to 1, in which case MC_CMD_CDX_DEVICE_CONTROL_GET will always return 1 + * for this bit, regardless of the value set here. + */ +#define MC_CMD_CDX_DEVICE_CONTROL_SET 0x7 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_MSGSET 0x7 +#undef MC_CMD_0x7_PRIVILEGE_CTG + +#define MC_CMD_0x7_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_CDX_DEVICE_CONTROL_SET_IN msgrequest */ +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_LEN 12 +/* Device bus number, in range 0 to BUS_COUNT-1 */ +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_BUS_OFST 0 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_BUS_LEN 4 +/* Device number relative to the bus, in range 0 to DEVICE_COUNT-1 for that bus */ +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_DEVICE_OFST 4 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_DEVICE_LEN 4 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_FLAGS_OFST 8 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_FLAGS_LEN 4 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_BUS_MASTER_ENABLE_OFST 8 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_BUS_MASTER_ENABLE_LBN 0 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_BUS_MASTER_ENABLE_WIDTH 1 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MSI_ENABLE_OFST 8 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MSI_ENABLE_LBN 1 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MSI_ENABLE_WIDTH 1 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MMIO_REGIONS_ENABLE_OFST 8 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MMIO_REGIONS_ENABLE_LBN 2 +#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MMIO_REGIONS_ENABLE_WIDTH 1 + +/* MC_CMD_CDX_DEVICE_CONTROL_SET_OUT msgresponse */ +#define MC_CMD_CDX_DEVICE_CONTROL_SET_OUT_LEN 0 + +/***********************************/ +/* + * MC_CMD_CDX_DEVICE_CONTROL_GET + * Returns device DMA, interrupt and MMIO region access control bits. See + * MC_CMD_CDX_DEVICE_CONTROL_SET for definition of the available control bits. + */ +#define MC_CMD_CDX_DEVICE_CONTROL_GET 0x8 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_MSGSET 0x8 +#undef MC_CMD_0x8_PRIVILEGE_CTG + +#define MC_CMD_0x8_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_CDX_DEVICE_CONTROL_GET_IN msgrequest */ +#define MC_CMD_CDX_DEVICE_CONTROL_GET_IN_LEN 8 +/* Device bus number, in range 0 to BUS_COUNT-1 */ +#define MC_CMD_CDX_DEVICE_CONTROL_GET_IN_BUS_OFST 0 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_IN_BUS_LEN 4 +/* Device number relative to the bus, in range 0 to DEVICE_COUNT-1 for that bus */ +#define MC_CMD_CDX_DEVICE_CONTROL_GET_IN_DEVICE_OFST 4 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_IN_DEVICE_LEN 4 + +/* MC_CMD_CDX_DEVICE_CONTROL_GET_OUT msgresponse */ +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_LEN 4 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_FLAGS_OFST 0 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_FLAGS_LEN 4 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_BUS_MASTER_ENABLE_OFST 0 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_BUS_MASTER_ENABLE_LBN 0 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_BUS_MASTER_ENABLE_WIDTH 1 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MSI_ENABLE_OFST 0 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MSI_ENABLE_LBN 1 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MSI_ENABLE_WIDTH 1 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MMIO_REGIONS_ENABLE_OFST 0 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MMIO_REGIONS_ENABLE_LBN 2 +#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MMIO_REGIONS_ENABLE_WIDTH 1 + +/***********************************/ +/* MC_CMD_V2_EXTN - Encapsulation for a v2 extended command */ +#define MC_CMD_V2_EXTN 0x7f + +/* MC_CMD_V2_EXTN_IN msgrequest */ +#define MC_CMD_V2_EXTN_IN_LEN 4 +/* the extended command number */ +#define MC_CMD_V2_EXTN_IN_EXTENDED_CMD_LBN 0 +#define MC_CMD_V2_EXTN_IN_EXTENDED_CMD_WIDTH 15 +#define MC_CMD_V2_EXTN_IN_UNUSED_LBN 15 +#define MC_CMD_V2_EXTN_IN_UNUSED_WIDTH 1 +/* the actual length of the encapsulated command */ +#define MC_CMD_V2_EXTN_IN_ACTUAL_LEN_LBN 16 +#define MC_CMD_V2_EXTN_IN_ACTUAL_LEN_WIDTH 10 +#define MC_CMD_V2_EXTN_IN_UNUSED2_LBN 26 +#define MC_CMD_V2_EXTN_IN_UNUSED2_WIDTH 2 +/* Type of command/response */ +#define MC_CMD_V2_EXTN_IN_MESSAGE_TYPE_LBN 28 +#define MC_CMD_V2_EXTN_IN_MESSAGE_TYPE_WIDTH 4 +/* + * enum: MCDI command directed to versal-net. MCDI responses of this type + * are not defined. + */ +#define MC_CMD_V2_EXTN_IN_MCDI_MESSAGE_TYPE_PLATFORM 0x2 + +#endif /* MC_CDX_PCOL_H */ diff --git a/drivers/cdx/controller/mcdi.c b/drivers/cdx/controller/mcdi.c new file mode 100644 index 000000000000..a211a2ca762e --- /dev/null +++ b/drivers/cdx/controller/mcdi.c @@ -0,0 +1,903 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Management-Controller-to-Driver Interface + * + * Copyright 2008-2013 Solarflare Communications Inc. + * Copyright (C) 2022-2023, Advanced Micro Devices, Inc. + */ +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/if_vlan.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/pci.h> +#include <linux/device.h> +#include <linux/rwsem.h> +#include <linux/vmalloc.h> +#include <net/netevent.h> +#include <linux/log2.h> +#include <linux/net_tstamp.h> +#include <linux/wait.h> + +#include "bitfield.h" +#include "mcdi.h" + +struct cdx_mcdi_copy_buffer { + struct cdx_dword buffer[DIV_ROUND_UP(MCDI_CTL_SDU_LEN_MAX, 4)]; +}; + +#ifdef CONFIG_MCDI_LOGGING +#define LOG_LINE_MAX (1024 - 32) +#endif + +static void cdx_mcdi_cancel_cmd(struct cdx_mcdi *cdx, struct cdx_mcdi_cmd *cmd); +static void cdx_mcdi_wait_for_cleanup(struct cdx_mcdi *cdx); +static int cdx_mcdi_rpc_async_internal(struct cdx_mcdi *cdx, + struct cdx_mcdi_cmd *cmd, + unsigned int *handle); +static void cdx_mcdi_start_or_queue(struct cdx_mcdi_iface *mcdi, + bool allow_retry); +static void cdx_mcdi_cmd_start_or_queue(struct cdx_mcdi_iface *mcdi, + struct cdx_mcdi_cmd *cmd); +static bool cdx_mcdi_complete_cmd(struct cdx_mcdi_iface *mcdi, + struct cdx_mcdi_cmd *cmd, + struct cdx_dword *outbuf, + int len, + struct list_head *cleanup_list); +static void cdx_mcdi_timeout_cmd(struct cdx_mcdi_iface *mcdi, + struct cdx_mcdi_cmd *cmd, + struct list_head *cleanup_list); +static void cdx_mcdi_cmd_work(struct work_struct *context); +static void cdx_mcdi_mode_fail(struct cdx_mcdi *cdx, struct list_head *cleanup_list); +static void _cdx_mcdi_display_error(struct cdx_mcdi *cdx, unsigned int cmd, + size_t inlen, int raw, int arg, int err_no); + +static bool cdx_cmd_cancelled(struct cdx_mcdi_cmd *cmd) +{ + return cmd->state == MCDI_STATE_RUNNING_CANCELLED; +} + +static void cdx_mcdi_cmd_release(struct kref *ref) +{ + kfree(container_of(ref, struct cdx_mcdi_cmd, ref)); +} + +static unsigned int cdx_mcdi_cmd_handle(struct cdx_mcdi_cmd *cmd) +{ + return cmd->handle; +} + +static void _cdx_mcdi_remove_cmd(struct cdx_mcdi_iface *mcdi, + struct cdx_mcdi_cmd *cmd, + struct list_head *cleanup_list) +{ + /* if cancelled, the completers have already been called */ + if (cdx_cmd_cancelled(cmd)) + return; + + if (cmd->completer) { + list_add_tail(&cmd->cleanup_list, cleanup_list); + ++mcdi->outstanding_cleanups; + kref_get(&cmd->ref); + } +} + +static void cdx_mcdi_remove_cmd(struct cdx_mcdi_iface *mcdi, + struct cdx_mcdi_cmd *cmd, + struct list_head *cleanup_list) +{ + list_del(&cmd->list); + _cdx_mcdi_remove_cmd(mcdi, cmd, cleanup_list); + cmd->state = MCDI_STATE_FINISHED; + kref_put(&cmd->ref, cdx_mcdi_cmd_release); + if (list_empty(&mcdi->cmd_list)) + wake_up(&mcdi->cmd_complete_wq); +} + +static unsigned long cdx_mcdi_rpc_timeout(struct cdx_mcdi *cdx, unsigned int cmd) +{ + if (!cdx->mcdi_ops->mcdi_rpc_timeout) + return MCDI_RPC_TIMEOUT; + else + return cdx->mcdi_ops->mcdi_rpc_timeout(cdx, cmd); +} + +int cdx_mcdi_init(struct cdx_mcdi *cdx) +{ + struct cdx_mcdi_iface *mcdi; + int rc = -ENOMEM; + + cdx->mcdi = kzalloc(sizeof(*cdx->mcdi), GFP_KERNEL); + if (!cdx->mcdi) + goto fail; + + mcdi = cdx_mcdi_if(cdx); + mcdi->cdx = cdx; + +#ifdef CONFIG_MCDI_LOGGING + mcdi->logging_buffer = kmalloc(LOG_LINE_MAX, GFP_KERNEL); + if (!mcdi->logging_buffer) + goto fail2; +#endif + mcdi->workqueue = alloc_ordered_workqueue("mcdi_wq", 0); + if (!mcdi->workqueue) + goto fail3; + mutex_init(&mcdi->iface_lock); + mcdi->mode = MCDI_MODE_EVENTS; + INIT_LIST_HEAD(&mcdi->cmd_list); + init_waitqueue_head(&mcdi->cmd_complete_wq); + + mcdi->new_epoch = true; + + return 0; +fail3: +#ifdef CONFIG_MCDI_LOGGING + kfree(mcdi->logging_buffer); +fail2: +#endif + kfree(cdx->mcdi); + cdx->mcdi = NULL; +fail: + return rc; +} + +void cdx_mcdi_finish(struct cdx_mcdi *cdx) +{ + struct cdx_mcdi_iface *mcdi; + + mcdi = cdx_mcdi_if(cdx); + if (!mcdi) + return; + + cdx_mcdi_wait_for_cleanup(cdx); + +#ifdef CONFIG_MCDI_LOGGING + kfree(mcdi->logging_buffer); +#endif + + destroy_workqueue(mcdi->workqueue); + kfree(cdx->mcdi); + cdx->mcdi = NULL; +} + +static bool cdx_mcdi_flushed(struct cdx_mcdi_iface *mcdi, bool ignore_cleanups) +{ + bool flushed; + + mutex_lock(&mcdi->iface_lock); + flushed = list_empty(&mcdi->cmd_list) && + (ignore_cleanups || !mcdi->outstanding_cleanups); + mutex_unlock(&mcdi->iface_lock); + return flushed; +} + +/* Wait for outstanding MCDI commands to complete. */ +static void cdx_mcdi_wait_for_cleanup(struct cdx_mcdi *cdx) +{ + struct cdx_mcdi_iface *mcdi = cdx_mcdi_if(cdx); + + if (!mcdi) + return; + + wait_event(mcdi->cmd_complete_wq, + cdx_mcdi_flushed(mcdi, false)); +} + +int cdx_mcdi_wait_for_quiescence(struct cdx_mcdi *cdx, + unsigned int timeout_jiffies) +{ + struct cdx_mcdi_iface *mcdi = cdx_mcdi_if(cdx); + DEFINE_WAIT_FUNC(wait, woken_wake_function); + int rc = 0; + + if (!mcdi) + return -EINVAL; + + flush_workqueue(mcdi->workqueue); + + add_wait_queue(&mcdi->cmd_complete_wq, &wait); + + while (!cdx_mcdi_flushed(mcdi, true)) { + rc = wait_woken(&wait, TASK_IDLE, timeout_jiffies); + if (rc) + continue; + break; + } + + remove_wait_queue(&mcdi->cmd_complete_wq, &wait); + + if (rc > 0) + rc = 0; + else if (rc == 0) + rc = -ETIMEDOUT; + + return rc; +} + +static u8 cdx_mcdi_payload_csum(const struct cdx_dword *hdr, size_t hdr_len, + const struct cdx_dword *sdu, size_t sdu_len) +{ + u8 *p = (u8 *)hdr; + u8 csum = 0; + int i; + + for (i = 0; i < hdr_len; i++) + csum += p[i]; + + p = (u8 *)sdu; + for (i = 0; i < sdu_len; i++) + csum += p[i]; + + return ~csum & 0xff; +} + +static void cdx_mcdi_send_request(struct cdx_mcdi *cdx, + struct cdx_mcdi_cmd *cmd) +{ + struct cdx_mcdi_iface *mcdi = cdx_mcdi_if(cdx); + const struct cdx_dword *inbuf = cmd->inbuf; + size_t inlen = cmd->inlen; + struct cdx_dword hdr[2]; + size_t hdr_len; + bool not_epoch; + u32 xflags; +#ifdef CONFIG_MCDI_LOGGING + char *buf; +#endif + + if (!mcdi) + return; +#ifdef CONFIG_MCDI_LOGGING + buf = mcdi->logging_buffer; /* page-sized */ +#endif + + mcdi->prev_seq = cmd->seq; + mcdi->seq_held_by[cmd->seq] = cmd; + mcdi->db_held_by = cmd; + cmd->started = jiffies; + + not_epoch = !mcdi->new_epoch; + xflags = 0; + + /* MCDI v2 */ + WARN_ON(inlen > MCDI_CTL_SDU_LEN_MAX_V2); + CDX_POPULATE_DWORD_7(hdr[0], + MCDI_HEADER_RESPONSE, 0, + MCDI_HEADER_RESYNC, 1, + MCDI_HEADER_CODE, MC_CMD_V2_EXTN, + MCDI_HEADER_DATALEN, 0, + MCDI_HEADER_SEQ, cmd->seq, + MCDI_HEADER_XFLAGS, xflags, + MCDI_HEADER_NOT_EPOCH, not_epoch); + CDX_POPULATE_DWORD_3(hdr[1], + MC_CMD_V2_EXTN_IN_EXTENDED_CMD, cmd->cmd, + MC_CMD_V2_EXTN_IN_ACTUAL_LEN, inlen, + MC_CMD_V2_EXTN_IN_MESSAGE_TYPE, + MC_CMD_V2_EXTN_IN_MCDI_MESSAGE_TYPE_PLATFORM); + hdr_len = 8; + +#ifdef CONFIG_MCDI_LOGGING + if (!WARN_ON_ONCE(!buf)) { + const struct cdx_dword *frags[] = { hdr, inbuf }; + const size_t frag_len[] = { hdr_len, round_up(inlen, 4) }; + int bytes = 0; + int i, j; + + for (j = 0; j < ARRAY_SIZE(frags); j++) { + const struct cdx_dword *frag; + + frag = frags[j]; + for (i = 0; + i < frag_len[j] / 4; + i++) { + /* + * Do not exceed the internal printk limit. + * The string before that is just over 70 bytes. + */ + if ((bytes + 75) > LOG_LINE_MAX) { + pr_info("MCDI RPC REQ:%s \\\n", buf); + bytes = 0; + } + bytes += snprintf(buf + bytes, + LOG_LINE_MAX - bytes, " %08x", + le32_to_cpu(frag[i].cdx_u32)); + } + } + + pr_info("MCDI RPC REQ:%s\n", buf); + } +#endif + hdr[0].cdx_u32 |= (__force __le32)(cdx_mcdi_payload_csum(hdr, hdr_len, inbuf, inlen) << + MCDI_HEADER_XFLAGS_LBN); + cdx->mcdi_ops->mcdi_request(cdx, hdr, hdr_len, inbuf, inlen); + + mcdi->new_epoch = false; +} + +static int cdx_mcdi_errno(struct cdx_mcdi *cdx, unsigned int mcdi_err) +{ + switch (mcdi_err) { + case 0: + case MC_CMD_ERR_QUEUE_FULL: + return mcdi_err; + case MC_CMD_ERR_EPERM: + return -EPERM; + case MC_CMD_ERR_ENOENT: + return -ENOENT; + case MC_CMD_ERR_EINTR: + return -EINTR; + case MC_CMD_ERR_EAGAIN: + return -EAGAIN; + case MC_CMD_ERR_EACCES: + return -EACCES; + case MC_CMD_ERR_EBUSY: + return -EBUSY; + case MC_CMD_ERR_EINVAL: + return -EINVAL; + case MC_CMD_ERR_ERANGE: + return -ERANGE; + case MC_CMD_ERR_EDEADLK: + return -EDEADLK; + case MC_CMD_ERR_ENOSYS: + return -EOPNOTSUPP; + case MC_CMD_ERR_ETIME: + return -ETIME; + case MC_CMD_ERR_EALREADY: + return -EALREADY; + case MC_CMD_ERR_ENOSPC: + return -ENOSPC; + case MC_CMD_ERR_ENOMEM: + return -ENOMEM; + case MC_CMD_ERR_ENOTSUP: + return -EOPNOTSUPP; + case MC_CMD_ERR_ALLOC_FAIL: + return -ENOBUFS; + case MC_CMD_ERR_MAC_EXIST: + return -EADDRINUSE; + case MC_CMD_ERR_NO_EVB_PORT: + return -EAGAIN; + default: + return -EPROTO; + } +} + +static void cdx_mcdi_process_cleanup_list(struct cdx_mcdi *cdx, + struct list_head *cleanup_list) +{ + struct cdx_mcdi_iface *mcdi = cdx_mcdi_if(cdx); + unsigned int cleanups = 0; + + if (!mcdi) + return; + + while (!list_empty(cleanup_list)) { + struct cdx_mcdi_cmd *cmd = + list_first_entry(cleanup_list, + struct cdx_mcdi_cmd, cleanup_list); + cmd->completer(cdx, cmd->cookie, cmd->rc, + cmd->outbuf, cmd->outlen); + list_del(&cmd->cleanup_list); + kref_put(&cmd->ref, cdx_mcdi_cmd_release); + ++cleanups; + } + + if (cleanups) { + bool all_done; + + mutex_lock(&mcdi->iface_lock); + CDX_WARN_ON_PARANOID(cleanups > mcdi->outstanding_cleanups); + all_done = (mcdi->outstanding_cleanups -= cleanups) == 0; + mutex_unlock(&mcdi->iface_lock); + if (all_done) + wake_up(&mcdi->cmd_complete_wq); + } +} + +static void _cdx_mcdi_cancel_cmd(struct cdx_mcdi_iface *mcdi, + unsigned int handle, + struct list_head *cleanup_list) +{ + struct cdx_mcdi_cmd *cmd; + + list_for_each_entry(cmd, &mcdi->cmd_list, list) + if (cdx_mcdi_cmd_handle(cmd) == handle) { + switch (cmd->state) { + case MCDI_STATE_QUEUED: + case MCDI_STATE_RETRY: + pr_debug("command %#x inlen %zu cancelled in queue\n", + cmd->cmd, cmd->inlen); + /* if not yet running, properly cancel it */ + cmd->rc = -EPIPE; + cdx_mcdi_remove_cmd(mcdi, cmd, cleanup_list); + break; + case MCDI_STATE_RUNNING: + case MCDI_STATE_RUNNING_CANCELLED: + case MCDI_STATE_FINISHED: + default: + /* invalid state? */ + WARN_ON(1); + } + break; + } +} + +static void cdx_mcdi_cancel_cmd(struct cdx_mcdi *cdx, struct cdx_mcdi_cmd *cmd) +{ + struct cdx_mcdi_iface *mcdi = cdx_mcdi_if(cdx); + LIST_HEAD(cleanup_list); + + if (!mcdi) + return; + + mutex_lock(&mcdi->iface_lock); + cdx_mcdi_timeout_cmd(mcdi, cmd, &cleanup_list); + mutex_unlock(&mcdi->iface_lock); + cdx_mcdi_process_cleanup_list(cdx, &cleanup_list); +} + +struct cdx_mcdi_blocking_data { + struct kref ref; + bool done; + wait_queue_head_t wq; + int rc; + struct cdx_dword *outbuf; + size_t outlen; + size_t outlen_actual; +}; + +static void cdx_mcdi_blocking_data_release(struct kref *ref) +{ + kfree(container_of(ref, struct cdx_mcdi_blocking_data, ref)); +} + +static void cdx_mcdi_rpc_completer(struct cdx_mcdi *cdx, unsigned long cookie, + int rc, struct cdx_dword *outbuf, + size_t outlen_actual) +{ + struct cdx_mcdi_blocking_data *wait_data = + (struct cdx_mcdi_blocking_data *)cookie; + + wait_data->rc = rc; + memcpy(wait_data->outbuf, outbuf, + min(outlen_actual, wait_data->outlen)); + wait_data->outlen_actual = outlen_actual; + /* memory barrier */ + smp_wmb(); + wait_data->done = true; + wake_up(&wait_data->wq); + kref_put(&wait_data->ref, cdx_mcdi_blocking_data_release); +} + +static int cdx_mcdi_rpc_sync(struct cdx_mcdi *cdx, unsigned int cmd, + const struct cdx_dword *inbuf, size_t inlen, + struct cdx_dword *outbuf, size_t outlen, + size_t *outlen_actual, bool quiet) +{ + struct cdx_mcdi_blocking_data *wait_data; + struct cdx_mcdi_cmd *cmd_item; + unsigned int handle; + int rc; + + if (outlen_actual) + *outlen_actual = 0; + + wait_data = kmalloc(sizeof(*wait_data), GFP_KERNEL); + if (!wait_data) + return -ENOMEM; + + cmd_item = kmalloc(sizeof(*cmd_item), GFP_KERNEL); + if (!cmd_item) { + kfree(wait_data); + return -ENOMEM; + } + + kref_init(&wait_data->ref); + wait_data->done = false; + init_waitqueue_head(&wait_data->wq); + wait_data->outbuf = outbuf; + wait_data->outlen = outlen; + + kref_init(&cmd_item->ref); + cmd_item->quiet = quiet; + cmd_item->cookie = (unsigned long)wait_data; + cmd_item->completer = &cdx_mcdi_rpc_completer; + cmd_item->cmd = cmd; + cmd_item->inlen = inlen; + cmd_item->inbuf = inbuf; + + /* Claim an extra reference for the completer to put. */ + kref_get(&wait_data->ref); + rc = cdx_mcdi_rpc_async_internal(cdx, cmd_item, &handle); + if (rc) { + kref_put(&wait_data->ref, cdx_mcdi_blocking_data_release); + goto out; + } + + if (!wait_event_timeout(wait_data->wq, wait_data->done, + cdx_mcdi_rpc_timeout(cdx, cmd)) && + !wait_data->done) { + pr_err("MC command 0x%x inlen %zu timed out (sync)\n", + cmd, inlen); + + cdx_mcdi_cancel_cmd(cdx, cmd_item); + + wait_data->rc = -ETIMEDOUT; + wait_data->outlen_actual = 0; + } + + if (outlen_actual) + *outlen_actual = wait_data->outlen_actual; + rc = wait_data->rc; + +out: + kref_put(&wait_data->ref, cdx_mcdi_blocking_data_release); + + return rc; +} + +static bool cdx_mcdi_get_seq(struct cdx_mcdi_iface *mcdi, unsigned char *seq) +{ + *seq = mcdi->prev_seq; + do { + *seq = (*seq + 1) % ARRAY_SIZE(mcdi->seq_held_by); + } while (mcdi->seq_held_by[*seq] && *seq != mcdi->prev_seq); + return !mcdi->seq_held_by[*seq]; +} + +static int cdx_mcdi_rpc_async_internal(struct cdx_mcdi *cdx, + struct cdx_mcdi_cmd *cmd, + unsigned int *handle) +{ + struct cdx_mcdi_iface *mcdi = cdx_mcdi_if(cdx); + LIST_HEAD(cleanup_list); + + if (!mcdi) { + kref_put(&cmd->ref, cdx_mcdi_cmd_release); + return -ENETDOWN; + } + + if (mcdi->mode == MCDI_MODE_FAIL) { + kref_put(&cmd->ref, cdx_mcdi_cmd_release); + return -ENETDOWN; + } + + cmd->mcdi = mcdi; + INIT_WORK(&cmd->work, cdx_mcdi_cmd_work); + INIT_LIST_HEAD(&cmd->list); + INIT_LIST_HEAD(&cmd->cleanup_list); + cmd->rc = 0; + cmd->outbuf = NULL; + cmd->outlen = 0; + + queue_work(mcdi->workqueue, &cmd->work); + return 0; +} + +static void cdx_mcdi_cmd_start_or_queue(struct cdx_mcdi_iface *mcdi, + struct cdx_mcdi_cmd *cmd) +{ + struct cdx_mcdi *cdx = mcdi->cdx; + u8 seq; + + if (!mcdi->db_held_by && + cdx_mcdi_get_seq(mcdi, &seq)) { + cmd->seq = seq; + cmd->reboot_seen = false; + cdx_mcdi_send_request(cdx, cmd); + cmd->state = MCDI_STATE_RUNNING; + } else { + cmd->state = MCDI_STATE_QUEUED; + } +} + +/* try to advance other commands */ +static void cdx_mcdi_start_or_queue(struct cdx_mcdi_iface *mcdi, + bool allow_retry) +{ + struct cdx_mcdi_cmd *cmd, *tmp; + + list_for_each_entry_safe(cmd, tmp, &mcdi->cmd_list, list) + if (cmd->state == MCDI_STATE_QUEUED || + (cmd->state == MCDI_STATE_RETRY && allow_retry)) + cdx_mcdi_cmd_start_or_queue(mcdi, cmd); +} + +void cdx_mcdi_process_cmd(struct cdx_mcdi *cdx, struct cdx_dword *outbuf, int len) +{ + struct cdx_mcdi_iface *mcdi; + struct cdx_mcdi_cmd *cmd; + LIST_HEAD(cleanup_list); + unsigned int respseq; + + if (!len || !outbuf) { + pr_err("Got empty MC response\n"); + return; + } + + mcdi = cdx_mcdi_if(cdx); + if (!mcdi) + return; + + respseq = CDX_DWORD_FIELD(outbuf[0], MCDI_HEADER_SEQ); + + mutex_lock(&mcdi->iface_lock); + cmd = mcdi->seq_held_by[respseq]; + + if (cmd) { + if (cmd->state == MCDI_STATE_FINISHED) { + mutex_unlock(&mcdi->iface_lock); + kref_put(&cmd->ref, cdx_mcdi_cmd_release); + return; + } + + cdx_mcdi_complete_cmd(mcdi, cmd, outbuf, len, &cleanup_list); + } else { + pr_err("MC response unexpected for seq : %0X\n", respseq); + } + + mutex_unlock(&mcdi->iface_lock); + + cdx_mcdi_process_cleanup_list(mcdi->cdx, &cleanup_list); +} + +static void cdx_mcdi_cmd_work(struct work_struct *context) +{ + struct cdx_mcdi_cmd *cmd = + container_of(context, struct cdx_mcdi_cmd, work); + struct cdx_mcdi_iface *mcdi = cmd->mcdi; + + mutex_lock(&mcdi->iface_lock); + + cmd->handle = mcdi->prev_handle++; + list_add_tail(&cmd->list, &mcdi->cmd_list); + cdx_mcdi_cmd_start_or_queue(mcdi, cmd); + + mutex_unlock(&mcdi->iface_lock); +} + +/* + * Returns true if the MCDI module is finished with the command. + * (examples of false would be if the command was proxied, or it was + * rejected by the MC due to lack of resources and requeued). + */ +static bool cdx_mcdi_complete_cmd(struct cdx_mcdi_iface *mcdi, + struct cdx_mcdi_cmd *cmd, + struct cdx_dword *outbuf, + int len, + struct list_head *cleanup_list) +{ + size_t resp_hdr_len, resp_data_len; + struct cdx_mcdi *cdx = mcdi->cdx; + unsigned int respcmd, error; + bool completed = false; + int rc; + + /* ensure the command can't go away before this function returns */ + kref_get(&cmd->ref); + + respcmd = CDX_DWORD_FIELD(outbuf[0], MCDI_HEADER_CODE); + error = CDX_DWORD_FIELD(outbuf[0], MCDI_HEADER_ERROR); + + if (respcmd != MC_CMD_V2_EXTN) { + resp_hdr_len = 4; + resp_data_len = CDX_DWORD_FIELD(outbuf[0], MCDI_HEADER_DATALEN); + } else { + resp_data_len = 0; + resp_hdr_len = 8; + if (len >= 8) + resp_data_len = + CDX_DWORD_FIELD(outbuf[1], MC_CMD_V2_EXTN_IN_ACTUAL_LEN); + } + + if ((resp_hdr_len + resp_data_len) > len) { + pr_warn("Incomplete MCDI response received %d. Expected %zu\n", + len, (resp_hdr_len + resp_data_len)); + resp_data_len = 0; + } + +#ifdef CONFIG_MCDI_LOGGING + if (!WARN_ON_ONCE(!mcdi->logging_buffer)) { + char *log = mcdi->logging_buffer; + int i, bytes = 0; + size_t rlen; + + WARN_ON_ONCE(resp_hdr_len % 4); + + rlen = resp_hdr_len / 4 + DIV_ROUND_UP(resp_data_len, 4); + + for (i = 0; i < rlen; i++) { + if ((bytes + 75) > LOG_LINE_MAX) { + pr_info("MCDI RPC RESP:%s \\\n", log); + bytes = 0; + } + bytes += snprintf(log + bytes, LOG_LINE_MAX - bytes, + " %08x", le32_to_cpu(outbuf[i].cdx_u32)); + } + + pr_info("MCDI RPC RESP:%s\n", log); + } +#endif + + if (error && resp_data_len == 0) { + /* MC rebooted during command */ + rc = -EIO; + } else { + if (WARN_ON_ONCE(error && resp_data_len < 4)) + resp_data_len = 4; + if (error) { + rc = CDX_DWORD_FIELD(outbuf[resp_hdr_len / 4], CDX_DWORD); + if (!cmd->quiet) { + int err_arg = 0; + + if (resp_data_len >= MC_CMD_ERR_ARG_OFST + 4) { + int offset = (resp_hdr_len + MC_CMD_ERR_ARG_OFST) / 4; + + err_arg = CDX_DWORD_VAL(outbuf[offset]); + } + + _cdx_mcdi_display_error(cdx, cmd->cmd, + cmd->inlen, rc, err_arg, + cdx_mcdi_errno(cdx, rc)); + } + rc = cdx_mcdi_errno(cdx, rc); + } else { + rc = 0; + } + } + + /* free doorbell */ + if (mcdi->db_held_by == cmd) + mcdi->db_held_by = NULL; + + if (cdx_cmd_cancelled(cmd)) { + list_del(&cmd->list); + kref_put(&cmd->ref, cdx_mcdi_cmd_release); + completed = true; + } else if (rc == MC_CMD_ERR_QUEUE_FULL) { + cmd->state = MCDI_STATE_RETRY; + } else { + cmd->rc = rc; + cmd->outbuf = outbuf + DIV_ROUND_UP(resp_hdr_len, 4); + cmd->outlen = resp_data_len; + cdx_mcdi_remove_cmd(mcdi, cmd, cleanup_list); + completed = true; + } + + /* free sequence number and buffer */ + mcdi->seq_held_by[cmd->seq] = NULL; + + cdx_mcdi_start_or_queue(mcdi, rc != MC_CMD_ERR_QUEUE_FULL); + + /* wake up anyone waiting for flush */ + wake_up(&mcdi->cmd_complete_wq); + + kref_put(&cmd->ref, cdx_mcdi_cmd_release); + + return completed; +} + +static void cdx_mcdi_timeout_cmd(struct cdx_mcdi_iface *mcdi, + struct cdx_mcdi_cmd *cmd, + struct list_head *cleanup_list) +{ + struct cdx_mcdi *cdx = mcdi->cdx; + + pr_err("MC command 0x%x inlen %zu state %d timed out after %u ms\n", + cmd->cmd, cmd->inlen, cmd->state, + jiffies_to_msecs(jiffies - cmd->started)); + + cmd->rc = -ETIMEDOUT; + cdx_mcdi_remove_cmd(mcdi, cmd, cleanup_list); + + cdx_mcdi_mode_fail(cdx, cleanup_list); +} + +/** + * cdx_mcdi_rpc - Issue an MCDI command and wait for completion + * @cdx: NIC through which to issue the command + * @cmd: Command type number + * @inbuf: Command parameters + * @inlen: Length of command parameters, in bytes. Must be a multiple + * of 4 and no greater than %MCDI_CTL_SDU_LEN_MAX_V1. + * @outbuf: Response buffer. May be %NULL if @outlen is 0. + * @outlen: Length of response buffer, in bytes. If the actual + * response is longer than @outlen & ~3, it will be truncated + * to that length. + * @outlen_actual: Pointer through which to return the actual response + * length. May be %NULL if this is not needed. + * + * This function may sleep and therefore must be called in process + * context. + * + * Return: A negative error code, or zero if successful. The error + * code may come from the MCDI response or may indicate a failure + * to communicate with the MC. In the former case, the response + * will still be copied to @outbuf and *@outlen_actual will be + * set accordingly. In the latter case, *@outlen_actual will be + * set to zero. + */ +int cdx_mcdi_rpc(struct cdx_mcdi *cdx, unsigned int cmd, + const struct cdx_dword *inbuf, size_t inlen, + struct cdx_dword *outbuf, size_t outlen, + size_t *outlen_actual) +{ + return cdx_mcdi_rpc_sync(cdx, cmd, inbuf, inlen, outbuf, outlen, + outlen_actual, false); +} + +/** + * cdx_mcdi_rpc_async - Schedule an MCDI command to run asynchronously + * @cdx: NIC through which to issue the command + * @cmd: Command type number + * @inbuf: Command parameters + * @inlen: Length of command parameters, in bytes + * @complete: Function to be called on completion or cancellation. + * @cookie: Arbitrary value to be passed to @complete. + * + * This function does not sleep and therefore may be called in atomic + * context. It will fail if event queues are disabled or if MCDI + * event completions have been disabled due to an error. + * + * If it succeeds, the @complete function will be called exactly once + * in process context, when one of the following occurs: + * (a) the completion event is received (in process context) + * (b) event queues are disabled (in the process that disables them) + */ +int +cdx_mcdi_rpc_async(struct cdx_mcdi *cdx, unsigned int cmd, + const struct cdx_dword *inbuf, size_t inlen, + cdx_mcdi_async_completer *complete, unsigned long cookie) +{ + struct cdx_mcdi_cmd *cmd_item = + kmalloc(sizeof(struct cdx_mcdi_cmd) + inlen, GFP_ATOMIC); + + if (!cmd_item) + return -ENOMEM; + + kref_init(&cmd_item->ref); + cmd_item->quiet = true; + cmd_item->cookie = cookie; + cmd_item->completer = complete; + cmd_item->cmd = cmd; + cmd_item->inlen = inlen; + /* inbuf is probably not valid after return, so take a copy */ + cmd_item->inbuf = (struct cdx_dword *)(cmd_item + 1); + memcpy(cmd_item + 1, inbuf, inlen); + + return cdx_mcdi_rpc_async_internal(cdx, cmd_item, NULL); +} + +static void _cdx_mcdi_display_error(struct cdx_mcdi *cdx, unsigned int cmd, + size_t inlen, int raw, int arg, int err_no) +{ + pr_err("MC command 0x%x inlen %d failed err_no=%d (raw=%d) arg=%d\n", + cmd, (int)inlen, err_no, raw, arg); +} + +/* + * Set MCDI mode to fail to prevent any new commands, then cancel any + * outstanding commands. + * Caller must hold the mcdi iface_lock. + */ +static void cdx_mcdi_mode_fail(struct cdx_mcdi *cdx, struct list_head *cleanup_list) +{ + struct cdx_mcdi_iface *mcdi = cdx_mcdi_if(cdx); + + if (!mcdi) + return; + + mcdi->mode = MCDI_MODE_FAIL; + + while (!list_empty(&mcdi->cmd_list)) { + struct cdx_mcdi_cmd *cmd; + + cmd = list_first_entry(&mcdi->cmd_list, struct cdx_mcdi_cmd, + list); + _cdx_mcdi_cancel_cmd(mcdi, cdx_mcdi_cmd_handle(cmd), cleanup_list); + } +} diff --git a/drivers/cdx/controller/mcdi.h b/drivers/cdx/controller/mcdi.h new file mode 100644 index 000000000000..0bfbeab04e43 --- /dev/null +++ b/drivers/cdx/controller/mcdi.h @@ -0,0 +1,248 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Copyright 2008-2013 Solarflare Communications Inc. + * Copyright (C) 2022-2023, Advanced Micro Devices, Inc. + */ + +#ifndef CDX_MCDI_H +#define CDX_MCDI_H + +#include <linux/mutex.h> +#include <linux/kref.h> +#include <linux/rpmsg.h> + +#include "bitfield.h" +#include "mc_cdx_pcol.h" + +#ifdef DEBUG +#define CDX_WARN_ON_ONCE_PARANOID(x) WARN_ON_ONCE(x) +#define CDX_WARN_ON_PARANOID(x) WARN_ON(x) +#else +#define CDX_WARN_ON_ONCE_PARANOID(x) do {} while (0) +#define CDX_WARN_ON_PARANOID(x) do {} while (0) +#endif + +/** + * enum cdx_mcdi_mode - MCDI transaction mode + * @MCDI_MODE_EVENTS: wait for an mcdi response callback. + * @MCDI_MODE_FAIL: we think MCDI is dead, so fail-fast all calls + */ +enum cdx_mcdi_mode { + MCDI_MODE_EVENTS, + MCDI_MODE_FAIL, +}; + +#define MCDI_RPC_TIMEOUT (10 * HZ) +#define MCDI_RPC_LONG_TIMEOU (60 * HZ) +#define MCDI_RPC_POST_RST_TIME (10 * HZ) + +#define MCDI_BUF_LEN (8 + MCDI_CTL_SDU_LEN_MAX) + +/** + * enum cdx_mcdi_cmd_state - State for an individual MCDI command + * @MCDI_STATE_QUEUED: Command not started and is waiting to run. + * @MCDI_STATE_RETRY: Command was submitted and MC rejected with no resources, + * as MC have too many outstanding commands. Command will be retried once + * another command returns. + * @MCDI_STATE_RUNNING: Command was accepted and is running. + * @MCDI_STATE_RUNNING_CANCELLED: Command is running but the issuer cancelled + * the command. + * @MCDI_STATE_FINISHED: Processing of this command has completed. + */ + +enum cdx_mcdi_cmd_state { + MCDI_STATE_QUEUED, + MCDI_STATE_RETRY, + MCDI_STATE_RUNNING, + MCDI_STATE_RUNNING_CANCELLED, + MCDI_STATE_FINISHED, +}; + +/** + * struct cdx_mcdi - CDX MCDI Firmware interface, to interact + * with CDX controller. + * @mcdi: MCDI interface + * @mcdi_ops: MCDI operations + * @r5_rproc : R5 Remoteproc device handle + * @rpdev: RPMsg device + * @ept: RPMsg endpoint + * @work: Post probe work + */ +struct cdx_mcdi { + /* MCDI interface */ + struct cdx_mcdi_data *mcdi; + const struct cdx_mcdi_ops *mcdi_ops; + + struct rproc *r5_rproc; + struct rpmsg_device *rpdev; + struct rpmsg_endpoint *ept; + struct work_struct work; +}; + +struct cdx_mcdi_ops { + void (*mcdi_request)(struct cdx_mcdi *cdx, + const struct cdx_dword *hdr, size_t hdr_len, + const struct cdx_dword *sdu, size_t sdu_len); + unsigned int (*mcdi_rpc_timeout)(struct cdx_mcdi *cdx, unsigned int cmd); +}; + +typedef void cdx_mcdi_async_completer(struct cdx_mcdi *cdx, + unsigned long cookie, int rc, + struct cdx_dword *outbuf, + size_t outlen_actual); + +/** + * struct cdx_mcdi_cmd - An outstanding MCDI command + * @ref: Reference count. There will be one reference if the command is + * in the mcdi_iface cmd_list, another if it's on a cleanup list, + * and a third if it's queued in the work queue. + * @list: The data for this entry in mcdi->cmd_list + * @cleanup_list: The data for this entry in a cleanup list + * @work: The work item for this command, queued in mcdi->workqueue + * @mcdi: The mcdi_iface for this command + * @state: The state of this command + * @inlen: inbuf length + * @inbuf: Input buffer + * @quiet: Whether to silence errors + * @reboot_seen: Whether a reboot has been seen during this command, + * to prevent duplicates + * @seq: Sequence number + * @started: Jiffies this command was started at + * @cookie: Context for completion function + * @completer: Completion function + * @handle: Command handle + * @cmd: Command number + * @rc: Return code + * @outlen: Length of output buffer + * @outbuf: Output buffer + */ +struct cdx_mcdi_cmd { + struct kref ref; + struct list_head list; + struct list_head cleanup_list; + struct work_struct work; + struct cdx_mcdi_iface *mcdi; + enum cdx_mcdi_cmd_state state; + size_t inlen; + const struct cdx_dword *inbuf; + bool quiet; + bool reboot_seen; + u8 seq; + unsigned long started; + unsigned long cookie; + cdx_mcdi_async_completer *completer; + unsigned int handle; + unsigned int cmd; + int rc; + size_t outlen; + struct cdx_dword *outbuf; + /* followed by inbuf data if necessary */ +}; + +/** + * struct cdx_mcdi_iface - MCDI protocol context + * @cdx: The associated NIC + * @iface_lock: Serialise access to this structure + * @outstanding_cleanups: Count of cleanups + * @cmd_list: List of outstanding and running commands + * @workqueue: Workqueue used for delayed processing + * @cmd_complete_wq: Waitqueue for command completion + * @db_held_by: Command the MC doorbell is in use by + * @seq_held_by: Command each sequence number is in use by + * @prev_handle: The last used command handle + * @mode: Poll for mcdi completion, or wait for an mcdi_event + * @prev_seq: The last used sequence number + * @new_epoch: Indicates start of day or start of MC reboot recovery + * @logging_buffer: Buffer that may be used to build MCDI tracing messages + * @logging_enabled: Whether to trace MCDI + */ +struct cdx_mcdi_iface { + struct cdx_mcdi *cdx; + /* Serialise access */ + struct mutex iface_lock; + unsigned int outstanding_cleanups; + struct list_head cmd_list; + struct workqueue_struct *workqueue; + wait_queue_head_t cmd_complete_wq; + struct cdx_mcdi_cmd *db_held_by; + struct cdx_mcdi_cmd *seq_held_by[16]; + unsigned int prev_handle; + enum cdx_mcdi_mode mode; + u8 prev_seq; + bool new_epoch; +#ifdef CONFIG_MCDI_LOGGING + bool logging_enabled; + char *logging_buffer; +#endif +}; + +/** + * struct cdx_mcdi_data - extra state for NICs that implement MCDI + * @iface: Interface/protocol state + * @fn_flags: Flags for this function, as returned by %MC_CMD_DRV_ATTACH. + */ +struct cdx_mcdi_data { + struct cdx_mcdi_iface iface; + u32 fn_flags; +}; + +static inline struct cdx_mcdi_iface *cdx_mcdi_if(struct cdx_mcdi *cdx) +{ + return cdx->mcdi ? &cdx->mcdi->iface : NULL; +} + +int cdx_mcdi_init(struct cdx_mcdi *cdx); +void cdx_mcdi_finish(struct cdx_mcdi *cdx); + +void cdx_mcdi_process_cmd(struct cdx_mcdi *cdx, struct cdx_dword *outbuf, int len); +int cdx_mcdi_rpc(struct cdx_mcdi *cdx, unsigned int cmd, + const struct cdx_dword *inbuf, size_t inlen, + struct cdx_dword *outbuf, size_t outlen, size_t *outlen_actual); +int cdx_mcdi_rpc_async(struct cdx_mcdi *cdx, unsigned int cmd, + const struct cdx_dword *inbuf, size_t inlen, + cdx_mcdi_async_completer *complete, + unsigned long cookie); +int cdx_mcdi_wait_for_quiescence(struct cdx_mcdi *cdx, + unsigned int timeout_jiffies); + +/* + * We expect that 16- and 32-bit fields in MCDI requests and responses + * are appropriately aligned, but 64-bit fields are only + * 32-bit-aligned. + */ +#define MCDI_DECLARE_BUF(_name, _len) struct cdx_dword _name[DIV_ROUND_UP(_len, 4)] = {{0}} +#define _MCDI_PTR(_buf, _offset) \ + ((u8 *)(_buf) + (_offset)) +#define MCDI_PTR(_buf, _field) \ + _MCDI_PTR(_buf, MC_CMD_ ## _field ## _OFST) +#define _MCDI_CHECK_ALIGN(_ofst, _align) \ + ((void)BUILD_BUG_ON_ZERO((_ofst) & ((_align) - 1)), \ + (_ofst)) +#define _MCDI_DWORD(_buf, _field) \ + ((_buf) + (_MCDI_CHECK_ALIGN(MC_CMD_ ## _field ## _OFST, 4) >> 2)) + +#define MCDI_BYTE(_buf, _field) \ + ((void)BUILD_BUG_ON_ZERO(MC_CMD_ ## _field ## _LEN != 1), \ + *MCDI_PTR(_buf, _field)) +#define MCDI_WORD(_buf, _field) \ + ((void)BUILD_BUG_ON_ZERO(MC_CMD_ ## _field ## _LEN != 2), \ + le16_to_cpu(*(__force const __le16 *)MCDI_PTR(_buf, _field))) +#define MCDI_SET_DWORD(_buf, _field, _value) \ + CDX_POPULATE_DWORD_1(*_MCDI_DWORD(_buf, _field), CDX_DWORD, _value) +#define MCDI_DWORD(_buf, _field) \ + CDX_DWORD_FIELD(*_MCDI_DWORD(_buf, _field), CDX_DWORD) +#define MCDI_POPULATE_DWORD_1(_buf, _field, _name1, _value1) \ + CDX_POPULATE_DWORD_1(*_MCDI_DWORD(_buf, _field), \ + MC_CMD_ ## _name1, _value1) +#define MCDI_SET_QWORD(_buf, _field, _value) \ + do { \ + CDX_POPULATE_DWORD_1(_MCDI_DWORD(_buf, _field)[0], \ + CDX_DWORD, (u32)(_value)); \ + CDX_POPULATE_DWORD_1(_MCDI_DWORD(_buf, _field)[1], \ + CDX_DWORD, (u64)(_value) >> 32); \ + } while (0) +#define MCDI_QWORD(_buf, _field) \ + (CDX_DWORD_FIELD(_MCDI_DWORD(_buf, _field)[0], CDX_DWORD) | \ + (u64)CDX_DWORD_FIELD(_MCDI_DWORD(_buf, _field)[1], CDX_DWORD) << 32) + +#endif /* CDX_MCDI_H */ diff --git a/drivers/cdx/controller/mcdi_functions.c b/drivers/cdx/controller/mcdi_functions.c new file mode 100644 index 000000000000..0158f26533dd --- /dev/null +++ b/drivers/cdx/controller/mcdi_functions.c @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022-2023, Advanced Micro Devices, Inc. + */ + +#include <linux/module.h> + +#include "mcdi.h" +#include "mcdi_functions.h" + +int cdx_mcdi_get_num_buses(struct cdx_mcdi *cdx) +{ + MCDI_DECLARE_BUF(outbuf, MC_CMD_CDX_BUS_ENUM_BUSES_OUT_LEN); + size_t outlen; + int ret; + + ret = cdx_mcdi_rpc(cdx, MC_CMD_CDX_BUS_ENUM_BUSES, NULL, 0, + outbuf, sizeof(outbuf), &outlen); + if (ret) + return ret; + + if (outlen != MC_CMD_CDX_BUS_ENUM_BUSES_OUT_LEN) + return -EIO; + + return MCDI_DWORD(outbuf, CDX_BUS_ENUM_BUSES_OUT_BUS_COUNT); +} + +int cdx_mcdi_get_num_devs(struct cdx_mcdi *cdx, int bus_num) +{ + MCDI_DECLARE_BUF(outbuf, MC_CMD_CDX_BUS_ENUM_DEVICES_OUT_LEN); + MCDI_DECLARE_BUF(inbuf, MC_CMD_CDX_BUS_ENUM_DEVICES_IN_LEN); + size_t outlen; + int ret; + + MCDI_SET_DWORD(inbuf, CDX_BUS_ENUM_DEVICES_IN_BUS, bus_num); + + ret = cdx_mcdi_rpc(cdx, MC_CMD_CDX_BUS_ENUM_DEVICES, inbuf, sizeof(inbuf), + outbuf, sizeof(outbuf), &outlen); + if (ret) + return ret; + + if (outlen != MC_CMD_CDX_BUS_ENUM_DEVICES_OUT_LEN) + return -EIO; + + return MCDI_DWORD(outbuf, CDX_BUS_ENUM_DEVICES_OUT_DEVICE_COUNT); +} + +int cdx_mcdi_get_dev_config(struct cdx_mcdi *cdx, + u8 bus_num, u8 dev_num, + struct cdx_dev_params *dev_params) +{ + MCDI_DECLARE_BUF(outbuf, MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_LEN); + MCDI_DECLARE_BUF(inbuf, MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN_LEN); + struct resource *res = &dev_params->res[0]; + size_t outlen; + u32 req_id; + int ret; + + MCDI_SET_DWORD(inbuf, CDX_BUS_GET_DEVICE_CONFIG_IN_BUS, bus_num); + MCDI_SET_DWORD(inbuf, CDX_BUS_GET_DEVICE_CONFIG_IN_DEVICE, dev_num); + + ret = cdx_mcdi_rpc(cdx, MC_CMD_CDX_BUS_GET_DEVICE_CONFIG, inbuf, sizeof(inbuf), + outbuf, sizeof(outbuf), &outlen); + if (ret) + return ret; + + if (outlen != MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_LEN) + return -EIO; + + dev_params->bus_num = bus_num; + dev_params->dev_num = dev_num; + + req_id = MCDI_DWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_REQUESTER_ID); + dev_params->req_id = req_id; + + dev_params->res_count = 0; + if (MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE) != 0) { + res[dev_params->res_count].start = + MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE); + res[dev_params->res_count].end = + MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE) + + MCDI_QWORD(outbuf, + CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE) - 1; + res[dev_params->res_count].flags = IORESOURCE_MEM; + dev_params->res_count++; + } + + if (MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE) != 0) { + res[dev_params->res_count].start = + MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE); + res[dev_params->res_count].end = + MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE) + + MCDI_QWORD(outbuf, + CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE) - 1; + res[dev_params->res_count].flags = IORESOURCE_MEM; + dev_params->res_count++; + } + + if (MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE) != 0) { + res[dev_params->res_count].start = + MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE); + res[dev_params->res_count].end = + MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE) + + MCDI_QWORD(outbuf, + CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE) - 1; + res[dev_params->res_count].flags = IORESOURCE_MEM; + dev_params->res_count++; + } + + if (MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE) != 0) { + res[dev_params->res_count].start = + MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE); + res[dev_params->res_count].end = + MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE) + + MCDI_QWORD(outbuf, + CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE) - 1; + res[dev_params->res_count].flags = IORESOURCE_MEM; + dev_params->res_count++; + } + + dev_params->vendor = MCDI_WORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_VENDOR_ID); + dev_params->device = MCDI_WORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_ID); + + return 0; +} + +int cdx_mcdi_reset_device(struct cdx_mcdi *cdx, u8 bus_num, u8 dev_num) +{ + MCDI_DECLARE_BUF(inbuf, MC_CMD_CDX_DEVICE_RESET_IN_LEN); + int ret; + + MCDI_SET_DWORD(inbuf, CDX_DEVICE_RESET_IN_BUS, bus_num); + MCDI_SET_DWORD(inbuf, CDX_DEVICE_RESET_IN_DEVICE, dev_num); + + ret = cdx_mcdi_rpc(cdx, MC_CMD_CDX_DEVICE_RESET, inbuf, sizeof(inbuf), + NULL, 0, NULL); + + return ret; +} diff --git a/drivers/cdx/controller/mcdi_functions.h b/drivers/cdx/controller/mcdi_functions.h new file mode 100644 index 000000000000..7440ace5539a --- /dev/null +++ b/drivers/cdx/controller/mcdi_functions.h @@ -0,0 +1,61 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Header file for MCDI FW interaction for CDX bus. + * + * Copyright (C) 2022-2023, Advanced Micro Devices, Inc. + */ + +#ifndef CDX_MCDI_FUNCTIONS_H +#define CDX_MCDI_FUNCTIONS_H + +#include "mcdi.h" +#include "../cdx.h" + +/** + * cdx_mcdi_get_num_buses - Get the total number of buses on + * the controller. + * @cdx: pointer to MCDI interface. + * + * Return: total number of buses available on the controller, + * <0 on failure + */ +int cdx_mcdi_get_num_buses(struct cdx_mcdi *cdx); + +/** + * cdx_mcdi_get_num_devs - Get the total number of devices on + * a particular bus of the controller. + * @cdx: pointer to MCDI interface. + * @bus_num: Bus number. + * + * Return: total number of devices available on the bus, <0 on failure + */ +int cdx_mcdi_get_num_devs(struct cdx_mcdi *cdx, int bus_num); + +/** + * cdx_mcdi_get_dev_config - Get configuration for a particular + * bus_num:dev_num + * @cdx: pointer to MCDI interface. + * @bus_num: Bus number. + * @dev_num: Device number. + * @dev_params: Pointer to cdx_dev_params, this is populated by this + * device with the configuration corresponding to the provided + * bus_num:dev_num. + * + * Return: 0 total number of devices available on the bus, <0 on failure + */ +int cdx_mcdi_get_dev_config(struct cdx_mcdi *cdx, + u8 bus_num, u8 dev_num, + struct cdx_dev_params *dev_params); + +/** + * cdx_mcdi_reset_device - Reset cdx device represented by bus_num:dev_num + * @cdx: pointer to MCDI interface. + * @bus_num: Bus number. + * @dev_num: Device number. + * + * Return: 0 on success, <0 on failure + */ +int cdx_mcdi_reset_device(struct cdx_mcdi *cdx, + u8 bus_num, u8 dev_num); + +#endif /* CDX_MCDI_FUNCTIONS_H */ diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 30fe9848dac1..801d6c83f896 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -247,8 +247,6 @@ config SONYPI To compile this driver as a module, choose M here: the module will be called sonypi. -source "drivers/char/pcmcia/Kconfig" - config MWAVE tristate "ACP Modem (Mwave) support" depends on X86 && TTY diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 1b35d1724565..c5f532e412f1 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -35,7 +35,6 @@ obj-$(CONFIG_TELCLOCK) += tlclk.o obj-$(CONFIG_MWAVE) += mwave/ obj-y += agp/ -obj-$(CONFIG_PCMCIA) += pcmcia/ obj-$(CONFIG_HANGCHECK_TIMER) += hangcheck-timer.o obj-$(CONFIG_TCG_TPM) += tpm/ diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig deleted file mode 100644 index f5d589b2be44..000000000000 --- a/drivers/char/pcmcia/Kconfig +++ /dev/null @@ -1,68 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# PCMCIA character device configuration -# - -menu "PCMCIA character devices" - depends on PCMCIA!=n - -config SYNCLINK_CS - tristate "SyncLink PC Card support" - depends on PCMCIA && TTY - help - Enable support for the SyncLink PC Card serial adapter, running - asynchronous and HDLC communications up to 512Kbps. The port is - selectable for RS-232, V.35, RS-449, RS-530, and X.21 - - This driver may be built as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called synclink_cs. If you want to do that, say M - here. - -config CARDMAN_4000 - tristate "Omnikey Cardman 4000 support" - depends on PCMCIA - select BITREVERSE - help - Enable support for the Omnikey Cardman 4000 PCMCIA Smartcard - reader. - - This kernel driver requires additional userspace support, either - by the vendor-provided PC/SC ifd_handler (http://www.omnikey.com/), - or via the cm4000 backend of OpenCT (http://www.opensc-project.org/opensc). - -config CARDMAN_4040 - tristate "Omnikey CardMan 4040 support" - depends on PCMCIA - help - Enable support for the Omnikey CardMan 4040 PCMCIA Smartcard - reader. - - This card is basically a USB CCID device connected to a FIFO - in I/O space. To use the kernel driver, you will need either the - PC/SC ifdhandler provided from the Omnikey homepage - (http://www.omnikey.com/), or a current development version of OpenCT - (http://www.opensc-project.org/opensc). - -config SCR24X - tristate "SCR24x Chip Card Interface support" - depends on PCMCIA - help - Enable support for the SCR24x PCMCIA Chip Card Interface. - - To compile this driver as a module, choose M here. - The module will be called scr24x_cs.. - - If unsure say N. - -config IPWIRELESS - tristate "IPWireless 3G UMTS PCMCIA card support" - depends on PCMCIA && NETDEVICES && TTY - select PPP - help - This is a driver for 3G UMTS PCMCIA card from IPWireless company. In - some countries (for example Czech Republic, T-Mobile ISP) this card - is shipped for service called UMTS 4G. - -endmenu - diff --git a/drivers/char/pcmcia/Makefile b/drivers/char/pcmcia/Makefile deleted file mode 100644 index 024eed1c4ca5..000000000000 --- a/drivers/char/pcmcia/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# drivers/char/pcmcia/Makefile -# -# Makefile for the Linux PCMCIA char device drivers. -# - -obj-$(CONFIG_SYNCLINK_CS) += synclink_cs.o -obj-$(CONFIG_CARDMAN_4000) += cm4000_cs.o -obj-$(CONFIG_CARDMAN_4040) += cm4040_cs.o -obj-$(CONFIG_SCR24X) += scr24x_cs.o diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c deleted file mode 100644 index 7f96d8571a53..000000000000 --- a/drivers/char/pcmcia/cm4000_cs.c +++ /dev/null @@ -1,1912 +0,0 @@ - /* - * A driver for the PCMCIA Smartcard Reader "Omnikey CardMan Mobile 4000" - * - * cm4000_cs.c support.linux@omnikey.com - * - * Tue Oct 23 11:32:43 GMT 2001 herp - cleaned up header files - * Sun Jan 20 10:11:15 MET 2002 herp - added modversion header files - * Thu Nov 14 16:34:11 GMT 2002 mh - added PPS functionality - * Tue Nov 19 16:36:27 GMT 2002 mh - added SUSPEND/RESUME functionailty - * Wed Jul 28 12:55:01 CEST 2004 mh - kernel 2.6 adjustments - * - * current version: 2.4.0gm4 - * - * (C) 2000,2001,2002,2003,2004 Omnikey AG - * - * (C) 2005-2006 Harald Welte <laforge@gnumonks.org> - * - Adhere to Kernel process/coding-style.rst - * - Port to 2.6.13 "new" style PCMCIA - * - Check for copy_{from,to}_user return values - * - Use nonseekable_open() - * - add class interface for udev device creation - * - * All rights reserved. Licensed under dual BSD/GPL license. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/fs.h> -#include <linux/delay.h> -#include <linux/bitrev.h> -#include <linux/mutex.h> -#include <linux/uaccess.h> -#include <linux/io.h> - -#include <pcmcia/cistpl.h> -#include <pcmcia/cisreg.h> -#include <pcmcia/ciscode.h> -#include <pcmcia/ds.h> - -#include <linux/cm4000_cs.h> - -/* #define ATR_CSUM */ - -#define reader_to_dev(x) (&x->p_dev->dev) - -/* n (debug level) is ignored */ -/* additional debug output may be enabled by re-compiling with - * CM4000_DEBUG set */ -/* #define CM4000_DEBUG */ -#define DEBUGP(n, rdr, x, args...) do { \ - dev_dbg(reader_to_dev(rdr), "%s:" x, \ - __func__ , ## args); \ - } while (0) - -static DEFINE_MUTEX(cmm_mutex); - -#define T_1SEC (HZ) -#define T_10MSEC msecs_to_jiffies(10) -#define T_20MSEC msecs_to_jiffies(20) -#define T_40MSEC msecs_to_jiffies(40) -#define T_50MSEC msecs_to_jiffies(50) -#define T_100MSEC msecs_to_jiffies(100) -#define T_500MSEC msecs_to_jiffies(500) - -static void cm4000_release(struct pcmcia_device *link); - -static int major; /* major number we get from the kernel */ - -/* note: the first state has to have number 0 always */ - -#define M_FETCH_ATR 0 -#define M_TIMEOUT_WAIT 1 -#define M_READ_ATR_LEN 2 -#define M_READ_ATR 3 -#define M_ATR_PRESENT 4 -#define M_BAD_CARD 5 -#define M_CARDOFF 6 - -#define LOCK_IO 0 -#define LOCK_MONITOR 1 - -#define IS_AUTOPPS_ACT 6 -#define IS_PROCBYTE_PRESENT 7 -#define IS_INVREV 8 -#define IS_ANY_T0 9 -#define IS_ANY_T1 10 -#define IS_ATR_PRESENT 11 -#define IS_ATR_VALID 12 -#define IS_CMM_ABSENT 13 -#define IS_BAD_LENGTH 14 -#define IS_BAD_CSUM 15 -#define IS_BAD_CARD 16 - -#define REG_FLAGS0(x) (x + 0) -#define REG_FLAGS1(x) (x + 1) -#define REG_NUM_BYTES(x) (x + 2) -#define REG_BUF_ADDR(x) (x + 3) -#define REG_BUF_DATA(x) (x + 4) -#define REG_NUM_SEND(x) (x + 5) -#define REG_BAUDRATE(x) (x + 6) -#define REG_STOPBITS(x) (x + 7) - -struct cm4000_dev { - struct pcmcia_device *p_dev; - - unsigned char atr[MAX_ATR]; - unsigned char rbuf[512]; - unsigned char sbuf[512]; - - wait_queue_head_t devq; /* when removing cardman must not be - zeroed! */ - - wait_queue_head_t ioq; /* if IO is locked, wait on this Q */ - wait_queue_head_t atrq; /* wait for ATR valid */ - wait_queue_head_t readq; /* used by write to wake blk.read */ - - /* warning: do not move this struct group. - * initialising to zero depends on it - see ZERO_DEV below. */ - struct_group(init, - unsigned char atr_csum; - unsigned char atr_len_retry; - unsigned short atr_len; - unsigned short rlen; /* bytes avail. after write */ - unsigned short rpos; /* latest read pos. write zeroes */ - unsigned char procbyte; /* T=0 procedure byte */ - unsigned char mstate; /* state of card monitor */ - unsigned char cwarn; /* slow down warning */ - unsigned char flags0; /* cardman IO-flags 0 */ - unsigned char flags1; /* cardman IO-flags 1 */ - unsigned int mdelay; /* variable monitor speeds, in jiffies */ - - unsigned int baudv; /* baud value for speed */ - unsigned char ta1; - unsigned char proto; /* T=0, T=1, ... */ - unsigned long flags; /* lock+flags (MONITOR,IO,ATR) * for concurrent - access */ - - unsigned char pts[4]; - - struct timer_list timer; /* used to keep monitor running */ - int monitor_running; - ); -}; - -#define ZERO_DEV(dev) memset(&((dev)->init), 0, sizeof((dev)->init)) - -static struct pcmcia_device *dev_table[CM4000_MAX_DEV]; -static struct class *cmm_class; - -/* This table doesn't use spaces after the comma between fields and thus - * violates process/coding-style.rst. However, I don't really think wrapping it around will - * make it any clearer to read -HW */ -static unsigned char fi_di_table[10][14] = { -/*FI 00 01 02 03 04 05 06 07 08 09 10 11 12 13 */ -/*DI */ -/* 0 */ {0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11}, -/* 1 */ {0x01,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x91,0x11,0x11,0x11,0x11}, -/* 2 */ {0x02,0x12,0x22,0x32,0x11,0x11,0x11,0x11,0x11,0x92,0xA2,0xB2,0x11,0x11}, -/* 3 */ {0x03,0x13,0x23,0x33,0x43,0x53,0x63,0x11,0x11,0x93,0xA3,0xB3,0xC3,0xD3}, -/* 4 */ {0x04,0x14,0x24,0x34,0x44,0x54,0x64,0x11,0x11,0x94,0xA4,0xB4,0xC4,0xD4}, -/* 5 */ {0x00,0x15,0x25,0x35,0x45,0x55,0x65,0x11,0x11,0x95,0xA5,0xB5,0xC5,0xD5}, -/* 6 */ {0x06,0x16,0x26,0x36,0x46,0x56,0x66,0x11,0x11,0x96,0xA6,0xB6,0xC6,0xD6}, -/* 7 */ {0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11}, -/* 8 */ {0x08,0x11,0x28,0x38,0x48,0x58,0x68,0x11,0x11,0x98,0xA8,0xB8,0xC8,0xD8}, -/* 9 */ {0x09,0x19,0x29,0x39,0x49,0x59,0x69,0x11,0x11,0x99,0xA9,0xB9,0xC9,0xD9} -}; - -#ifndef CM4000_DEBUG -#define xoutb outb -#define xinb inb -#else -static inline void xoutb(unsigned char val, unsigned short port) -{ - pr_debug("outb(val=%.2x,port=%.4x)\n", val, port); - outb(val, port); -} -static inline unsigned char xinb(unsigned short port) -{ - unsigned char val; - - val = inb(port); - pr_debug("%.2x=inb(%.4x)\n", val, port); - - return val; -} -#endif - -static inline unsigned char invert_revert(unsigned char ch) -{ - return bitrev8(~ch); -} - -static void str_invert_revert(unsigned char *b, int len) -{ - int i; - - for (i = 0; i < len; i++) - b[i] = invert_revert(b[i]); -} - -#define ATRLENCK(dev,pos) \ - if (pos>=dev->atr_len || pos>=MAX_ATR) \ - goto return_0; - -static unsigned int calc_baudv(unsigned char fidi) -{ - unsigned int wcrcf, wbrcf, fi_rfu, di_rfu; - - fi_rfu = 372; - di_rfu = 1; - - /* FI */ - switch ((fidi >> 4) & 0x0F) { - case 0x00: - wcrcf = 372; - break; - case 0x01: - wcrcf = 372; - break; - case 0x02: - wcrcf = 558; - break; - case 0x03: - wcrcf = 744; - break; - case 0x04: - wcrcf = 1116; - break; - case 0x05: - wcrcf = 1488; - break; - case 0x06: - wcrcf = 1860; - break; - case 0x07: - wcrcf = fi_rfu; - break; - case 0x08: - wcrcf = fi_rfu; - break; - case 0x09: - wcrcf = 512; - break; - case 0x0A: - wcrcf = 768; - break; - case 0x0B: - wcrcf = 1024; - break; - case 0x0C: - wcrcf = 1536; - break; - case 0x0D: - wcrcf = 2048; - break; - default: - wcrcf = fi_rfu; - break; - } - - /* DI */ - switch (fidi & 0x0F) { - case 0x00: - wbrcf = di_rfu; - break; - case 0x01: - wbrcf = 1; - break; - case 0x02: - wbrcf = 2; - break; - case 0x03: - wbrcf = 4; - break; - case 0x04: - wbrcf = 8; - break; - case 0x05: - wbrcf = 16; - break; - case 0x06: - wbrcf = 32; - break; - case 0x07: - wbrcf = di_rfu; - break; - case 0x08: - wbrcf = 12; - break; - case 0x09: - wbrcf = 20; - break; - default: - wbrcf = di_rfu; - break; - } - - return (wcrcf / wbrcf); -} - -static unsigned short io_read_num_rec_bytes(unsigned int iobase, - unsigned short *s) -{ - unsigned short tmp; - - tmp = *s = 0; - do { - *s = tmp; - tmp = inb(REG_NUM_BYTES(iobase)) | - (inb(REG_FLAGS0(iobase)) & 4 ? 0x100 : 0); - } while (tmp != *s); - - return *s; -} - -static int parse_atr(struct cm4000_dev *dev) -{ - unsigned char any_t1, any_t0; - unsigned char ch, ifno; - int ix, done; - - DEBUGP(3, dev, "-> parse_atr: dev->atr_len = %i\n", dev->atr_len); - - if (dev->atr_len < 3) { - DEBUGP(5, dev, "parse_atr: atr_len < 3\n"); - return 0; - } - - if (dev->atr[0] == 0x3f) - set_bit(IS_INVREV, &dev->flags); - else - clear_bit(IS_INVREV, &dev->flags); - ix = 1; - ifno = 1; - ch = dev->atr[1]; - dev->proto = 0; /* XXX PROTO */ - any_t1 = any_t0 = done = 0; - dev->ta1 = 0x11; /* defaults to 9600 baud */ - do { - if (ifno == 1 && (ch & 0x10)) { - /* read first interface byte and TA1 is present */ - dev->ta1 = dev->atr[2]; - DEBUGP(5, dev, "Card says FiDi is 0x%.2x\n", dev->ta1); - ifno++; - } else if ((ifno == 2) && (ch & 0x10)) { /* TA(2) */ - dev->ta1 = 0x11; - ifno++; - } - - DEBUGP(5, dev, "Yi=%.2x\n", ch & 0xf0); - ix += ((ch & 0x10) >> 4) /* no of int.face chars */ - +((ch & 0x20) >> 5) - + ((ch & 0x40) >> 6) - + ((ch & 0x80) >> 7); - /* ATRLENCK(dev,ix); */ - if (ch & 0x80) { /* TDi */ - ch = dev->atr[ix]; - if ((ch & 0x0f)) { - any_t1 = 1; - DEBUGP(5, dev, "card is capable of T=1\n"); - } else { - any_t0 = 1; - DEBUGP(5, dev, "card is capable of T=0\n"); - } - } else - done = 1; - } while (!done); - - DEBUGP(5, dev, "ix=%d noHist=%d any_t1=%d\n", - ix, dev->atr[1] & 15, any_t1); - if (ix + 1 + (dev->atr[1] & 0x0f) + any_t1 != dev->atr_len) { - DEBUGP(5, dev, "length error\n"); - return 0; - } - if (any_t0) - set_bit(IS_ANY_T0, &dev->flags); - - if (any_t1) { /* compute csum */ - dev->atr_csum = 0; -#ifdef ATR_CSUM - for (i = 1; i < dev->atr_len; i++) - dev->atr_csum ^= dev->atr[i]; - if (dev->atr_csum) { - set_bit(IS_BAD_CSUM, &dev->flags); - DEBUGP(5, dev, "bad checksum\n"); - goto return_0; - } -#endif - if (any_t0 == 0) - dev->proto = 1; /* XXX PROTO */ - set_bit(IS_ANY_T1, &dev->flags); - } - - return 1; -} - -struct card_fixup { - char atr[12]; - u_int8_t atr_len; - u_int8_t stopbits; -}; - -static struct card_fixup card_fixups[] = { - { /* ACOS */ - .atr = { 0x3b, 0xb3, 0x11, 0x00, 0x00, 0x41, 0x01 }, - .atr_len = 7, - .stopbits = 0x03, - }, - { /* Motorola */ - .atr = {0x3b, 0x76, 0x13, 0x00, 0x00, 0x80, 0x62, 0x07, - 0x41, 0x81, 0x81 }, - .atr_len = 11, - .stopbits = 0x04, - }, -}; - -static void set_cardparameter(struct cm4000_dev *dev) -{ - int i; - unsigned int iobase = dev->p_dev->resource[0]->start; - u_int8_t stopbits = 0x02; /* ISO default */ - - DEBUGP(3, dev, "-> set_cardparameter\n"); - - dev->flags1 = dev->flags1 | (((dev->baudv - 1) & 0x0100) >> 8); - xoutb(dev->flags1, REG_FLAGS1(iobase)); - DEBUGP(5, dev, "flags1 = 0x%02x\n", dev->flags1); - - /* set baudrate */ - xoutb((unsigned char)((dev->baudv - 1) & 0xFF), REG_BAUDRATE(iobase)); - - DEBUGP(5, dev, "baudv = %i -> write 0x%02x\n", dev->baudv, - ((dev->baudv - 1) & 0xFF)); - - /* set stopbits */ - for (i = 0; i < ARRAY_SIZE(card_fixups); i++) { - if (!memcmp(dev->atr, card_fixups[i].atr, - card_fixups[i].atr_len)) - stopbits = card_fixups[i].stopbits; - } - xoutb(stopbits, REG_STOPBITS(iobase)); - - DEBUGP(3, dev, "<- set_cardparameter\n"); -} - -static int set_protocol(struct cm4000_dev *dev, struct ptsreq *ptsreq) -{ - - unsigned long tmp, i; - unsigned short num_bytes_read; - unsigned char pts_reply[4]; - ssize_t rc; - unsigned int iobase = dev->p_dev->resource[0]->start; - - rc = 0; - - DEBUGP(3, dev, "-> set_protocol\n"); - DEBUGP(5, dev, "ptsreq->Protocol = 0x%.8x, ptsreq->Flags=0x%.8x, " - "ptsreq->pts1=0x%.2x, ptsreq->pts2=0x%.2x, " - "ptsreq->pts3=0x%.2x\n", (unsigned int)ptsreq->protocol, - (unsigned int)ptsreq->flags, ptsreq->pts1, ptsreq->pts2, - ptsreq->pts3); - - /* Fill PTS structure */ - dev->pts[0] = 0xff; - dev->pts[1] = 0x00; - tmp = ptsreq->protocol; - while ((tmp = (tmp >> 1)) > 0) - dev->pts[1]++; - dev->proto = dev->pts[1]; /* Set new protocol */ - dev->pts[1] = (0x01 << 4) | (dev->pts[1]); - - /* Correct Fi/Di according to CM4000 Fi/Di table */ - DEBUGP(5, dev, "Ta(1) from ATR is 0x%.2x\n", dev->ta1); - /* set Fi/Di according to ATR TA(1) */ - dev->pts[2] = fi_di_table[dev->ta1 & 0x0F][(dev->ta1 >> 4) & 0x0F]; - - /* Calculate PCK character */ - dev->pts[3] = dev->pts[0] ^ dev->pts[1] ^ dev->pts[2]; - - DEBUGP(5, dev, "pts0=%.2x, pts1=%.2x, pts2=%.2x, pts3=%.2x\n", - dev->pts[0], dev->pts[1], dev->pts[2], dev->pts[3]); - - /* check card convention */ - if (test_bit(IS_INVREV, &dev->flags)) - str_invert_revert(dev->pts, 4); - - /* reset SM */ - xoutb(0x80, REG_FLAGS0(iobase)); - - /* Enable access to the message buffer */ - DEBUGP(5, dev, "Enable access to the messages buffer\n"); - dev->flags1 = 0x20 /* T_Active */ - | (test_bit(IS_INVREV, &dev->flags) ? 0x02 : 0x00) /* inv parity */ - | ((dev->baudv >> 8) & 0x01); /* MSB-baud */ - xoutb(dev->flags1, REG_FLAGS1(iobase)); - - DEBUGP(5, dev, "Enable message buffer -> flags1 = 0x%.2x\n", - dev->flags1); - - /* write challenge to the buffer */ - DEBUGP(5, dev, "Write challenge to buffer: "); - for (i = 0; i < 4; i++) { - xoutb(i, REG_BUF_ADDR(iobase)); - xoutb(dev->pts[i], REG_BUF_DATA(iobase)); /* buf data */ -#ifdef CM4000_DEBUG - pr_debug("0x%.2x ", dev->pts[i]); - } - pr_debug("\n"); -#else - } -#endif - - /* set number of bytes to write */ - DEBUGP(5, dev, "Set number of bytes to write\n"); - xoutb(0x04, REG_NUM_SEND(iobase)); - - /* Trigger CARDMAN CONTROLLER */ - xoutb(0x50, REG_FLAGS0(iobase)); - - /* Monitor progress */ - /* wait for xmit done */ - DEBUGP(5, dev, "Waiting for NumRecBytes getting valid\n"); - - for (i = 0; i < 100; i++) { - if (inb(REG_FLAGS0(iobase)) & 0x08) { - DEBUGP(5, dev, "NumRecBytes is valid\n"); - break; - } - /* can not sleep as this is in atomic context */ - mdelay(10); - } - if (i == 100) { - DEBUGP(5, dev, "Timeout waiting for NumRecBytes getting " - "valid\n"); - rc = -EIO; - goto exit_setprotocol; - } - - DEBUGP(5, dev, "Reading NumRecBytes\n"); - for (i = 0; i < 100; i++) { - io_read_num_rec_bytes(iobase, &num_bytes_read); - if (num_bytes_read >= 4) { - DEBUGP(2, dev, "NumRecBytes = %i\n", num_bytes_read); - if (num_bytes_read > 4) { - rc = -EIO; - goto exit_setprotocol; - } - break; - } - /* can not sleep as this is in atomic context */ - mdelay(10); - } - - /* check whether it is a short PTS reply? */ - if (num_bytes_read == 3) - i = 0; - - if (i == 100) { - DEBUGP(5, dev, "Timeout reading num_bytes_read\n"); - rc = -EIO; - goto exit_setprotocol; - } - - DEBUGP(5, dev, "Reset the CARDMAN CONTROLLER\n"); - xoutb(0x80, REG_FLAGS0(iobase)); - - /* Read PPS reply */ - DEBUGP(5, dev, "Read PPS reply\n"); - for (i = 0; i < num_bytes_read; i++) { - xoutb(i, REG_BUF_ADDR(iobase)); - pts_reply[i] = inb(REG_BUF_DATA(iobase)); - } - -#ifdef CM4000_DEBUG - DEBUGP(2, dev, "PTSreply: "); - for (i = 0; i < num_bytes_read; i++) { - pr_debug("0x%.2x ", pts_reply[i]); - } - pr_debug("\n"); -#endif /* CM4000_DEBUG */ - - DEBUGP(5, dev, "Clear Tactive in Flags1\n"); - xoutb(0x20, REG_FLAGS1(iobase)); - - /* Compare ptsreq and ptsreply */ - if ((dev->pts[0] == pts_reply[0]) && - (dev->pts[1] == pts_reply[1]) && - (dev->pts[2] == pts_reply[2]) && (dev->pts[3] == pts_reply[3])) { - /* setcardparameter according to PPS */ - dev->baudv = calc_baudv(dev->pts[2]); - set_cardparameter(dev); - } else if ((dev->pts[0] == pts_reply[0]) && - ((dev->pts[1] & 0xef) == pts_reply[1]) && - ((pts_reply[0] ^ pts_reply[1]) == pts_reply[2])) { - /* short PTS reply, set card parameter to default values */ - dev->baudv = calc_baudv(0x11); - set_cardparameter(dev); - } else - rc = -EIO; - -exit_setprotocol: - DEBUGP(3, dev, "<- set_protocol\n"); - return rc; -} - -static int io_detect_cm4000(unsigned int iobase, struct cm4000_dev *dev) -{ - - /* note: statemachine is assumed to be reset */ - if (inb(REG_FLAGS0(iobase)) & 8) { - clear_bit(IS_ATR_VALID, &dev->flags); - set_bit(IS_CMM_ABSENT, &dev->flags); - return 0; /* detect CMM = 1 -> failure */ - } - /* xoutb(0x40, REG_FLAGS1(iobase)); detectCMM */ - xoutb(dev->flags1 | 0x40, REG_FLAGS1(iobase)); - if ((inb(REG_FLAGS0(iobase)) & 8) == 0) { - clear_bit(IS_ATR_VALID, &dev->flags); - set_bit(IS_CMM_ABSENT, &dev->flags); - return 0; /* detect CMM=0 -> failure */ - } - /* clear detectCMM again by restoring original flags1 */ - xoutb(dev->flags1, REG_FLAGS1(iobase)); - return 1; -} - -static void terminate_monitor(struct cm4000_dev *dev) -{ - - /* tell the monitor to stop and wait until - * it terminates. - */ - DEBUGP(3, dev, "-> terminate_monitor\n"); - wait_event_interruptible(dev->devq, - test_and_set_bit(LOCK_MONITOR, - (void *)&dev->flags)); - - /* now, LOCK_MONITOR has been set. - * allow a last cycle in the monitor. - * the monitor will indicate that it has - * finished by clearing this bit. - */ - DEBUGP(5, dev, "Now allow last cycle of monitor!\n"); - while (test_bit(LOCK_MONITOR, (void *)&dev->flags)) - msleep(25); - - DEBUGP(5, dev, "Delete timer\n"); - del_timer_sync(&dev->timer); -#ifdef CM4000_DEBUG - dev->monitor_running = 0; -#endif - - DEBUGP(3, dev, "<- terminate_monitor\n"); -} - -/* - * monitor the card every 50msec. as a side-effect, retrieve the - * atr once a card is inserted. another side-effect of retrieving the - * atr is that the card will be powered on, so there is no need to - * power on the card explicitly from the application: the driver - * is already doing that for you. - */ - -static void monitor_card(struct timer_list *t) -{ - struct cm4000_dev *dev = from_timer(dev, t, timer); - unsigned int iobase = dev->p_dev->resource[0]->start; - unsigned short s; - struct ptsreq ptsreq; - int i, atrc; - - DEBUGP(7, dev, "-> monitor_card\n"); - - /* if someone has set the lock for us: we're done! */ - if (test_and_set_bit(LOCK_MONITOR, &dev->flags)) { - DEBUGP(4, dev, "About to stop monitor\n"); - /* no */ - dev->rlen = - dev->rpos = - dev->atr_csum = dev->atr_len_retry = dev->cwarn = 0; - dev->mstate = M_FETCH_ATR; - clear_bit(LOCK_MONITOR, &dev->flags); - /* close et al. are sleeping on devq, so wake it */ - wake_up_interruptible(&dev->devq); - DEBUGP(2, dev, "<- monitor_card (we are done now)\n"); - return; - } - - /* try to lock io: if it is already locked, just add another timer */ - if (test_and_set_bit(LOCK_IO, (void *)&dev->flags)) { - DEBUGP(4, dev, "Couldn't get IO lock\n"); - goto return_with_timer; - } - - /* is a card/a reader inserted at all ? */ - dev->flags0 = xinb(REG_FLAGS0(iobase)); - DEBUGP(7, dev, "dev->flags0 = 0x%2x\n", dev->flags0); - DEBUGP(7, dev, "smartcard present: %s\n", - dev->flags0 & 1 ? "yes" : "no"); - DEBUGP(7, dev, "cardman present: %s\n", - dev->flags0 == 0xff ? "no" : "yes"); - - if ((dev->flags0 & 1) == 0 /* no smartcard inserted */ - || dev->flags0 == 0xff) { /* no cardman inserted */ - /* no */ - dev->rlen = - dev->rpos = - dev->atr_csum = dev->atr_len_retry = dev->cwarn = 0; - dev->mstate = M_FETCH_ATR; - - dev->flags &= 0x000000ff; /* only keep IO and MONITOR locks */ - - if (dev->flags0 == 0xff) { - DEBUGP(4, dev, "set IS_CMM_ABSENT bit\n"); - set_bit(IS_CMM_ABSENT, &dev->flags); - } else if (test_bit(IS_CMM_ABSENT, &dev->flags)) { - DEBUGP(4, dev, "clear IS_CMM_ABSENT bit " - "(card is removed)\n"); - clear_bit(IS_CMM_ABSENT, &dev->flags); - } - - goto release_io; - } else if ((dev->flags0 & 1) && test_bit(IS_CMM_ABSENT, &dev->flags)) { - /* cardman and card present but cardman was absent before - * (after suspend with inserted card) */ - DEBUGP(4, dev, "clear IS_CMM_ABSENT bit (card is inserted)\n"); - clear_bit(IS_CMM_ABSENT, &dev->flags); - } - - if (test_bit(IS_ATR_VALID, &dev->flags) == 1) { - DEBUGP(7, dev, "believe ATR is already valid (do nothing)\n"); - goto release_io; - } - - switch (dev->mstate) { - case M_CARDOFF: { - unsigned char flags0; - - DEBUGP(4, dev, "M_CARDOFF\n"); - flags0 = inb(REG_FLAGS0(iobase)); - if (flags0 & 0x02) { - /* wait until Flags0 indicate power is off */ - dev->mdelay = T_10MSEC; - } else { - /* Flags0 indicate power off and no card inserted now; - * Reset CARDMAN CONTROLLER */ - xoutb(0x80, REG_FLAGS0(iobase)); - - /* prepare for fetching ATR again: after card off ATR - * is read again automatically */ - dev->rlen = - dev->rpos = - dev->atr_csum = - dev->atr_len_retry = dev->cwarn = 0; - dev->mstate = M_FETCH_ATR; - - /* minimal gap between CARDOFF and read ATR is 50msec */ - dev->mdelay = T_50MSEC; - } - break; - } - case M_FETCH_ATR: - DEBUGP(4, dev, "M_FETCH_ATR\n"); - xoutb(0x80, REG_FLAGS0(iobase)); - DEBUGP(4, dev, "Reset BAUDV to 9600\n"); - dev->baudv = 0x173; /* 9600 */ - xoutb(0x02, REG_STOPBITS(iobase)); /* stopbits=2 */ - xoutb(0x73, REG_BAUDRATE(iobase)); /* baud value */ - xoutb(0x21, REG_FLAGS1(iobase)); /* T_Active=1, baud - value */ - /* warm start vs. power on: */ - xoutb(dev->flags0 & 2 ? 0x46 : 0x44, REG_FLAGS0(iobase)); - dev->mdelay = T_40MSEC; - dev->mstate = M_TIMEOUT_WAIT; - break; - case M_TIMEOUT_WAIT: - DEBUGP(4, dev, "M_TIMEOUT_WAIT\n"); - /* numRecBytes */ - io_read_num_rec_bytes(iobase, &dev->atr_len); - dev->mdelay = T_10MSEC; - dev->mstate = M_READ_ATR_LEN; - break; - case M_READ_ATR_LEN: - DEBUGP(4, dev, "M_READ_ATR_LEN\n"); - /* infinite loop possible, since there is no timeout */ - -#define MAX_ATR_LEN_RETRY 100 - - if (dev->atr_len == io_read_num_rec_bytes(iobase, &s)) { - if (dev->atr_len_retry++ >= MAX_ATR_LEN_RETRY) { /* + XX msec */ - dev->mdelay = T_10MSEC; - dev->mstate = M_READ_ATR; - } - } else { - dev->atr_len = s; - dev->atr_len_retry = 0; /* set new timeout */ - } - - DEBUGP(4, dev, "Current ATR_LEN = %i\n", dev->atr_len); - break; - case M_READ_ATR: - DEBUGP(4, dev, "M_READ_ATR\n"); - xoutb(0x80, REG_FLAGS0(iobase)); /* reset SM */ - for (i = 0; i < dev->atr_len; i++) { - xoutb(i, REG_BUF_ADDR(iobase)); - dev->atr[i] = inb(REG_BUF_DATA(iobase)); - } - /* Deactivate T_Active flags */ - DEBUGP(4, dev, "Deactivate T_Active flags\n"); - dev->flags1 = 0x01; - xoutb(dev->flags1, REG_FLAGS1(iobase)); - - /* atr is present (which doesn't mean it's valid) */ - set_bit(IS_ATR_PRESENT, &dev->flags); - if (dev->atr[0] == 0x03) - str_invert_revert(dev->atr, dev->atr_len); - atrc = parse_atr(dev); - if (atrc == 0) { /* atr invalid */ - dev->mdelay = 0; - dev->mstate = M_BAD_CARD; - } else { - dev->mdelay = T_50MSEC; - dev->mstate = M_ATR_PRESENT; - set_bit(IS_ATR_VALID, &dev->flags); - } - - if (test_bit(IS_ATR_VALID, &dev->flags) == 1) { - DEBUGP(4, dev, "monitor_card: ATR valid\n"); - /* if ta1 == 0x11, no PPS necessary (default values) */ - /* do not do PPS with multi protocol cards */ - if ((test_bit(IS_AUTOPPS_ACT, &dev->flags) == 0) && - (dev->ta1 != 0x11) && - !(test_bit(IS_ANY_T0, &dev->flags) && - test_bit(IS_ANY_T1, &dev->flags))) { - DEBUGP(4, dev, "Perform AUTOPPS\n"); - set_bit(IS_AUTOPPS_ACT, &dev->flags); - ptsreq.protocol = (0x01 << dev->proto); - ptsreq.flags = 0x01; - ptsreq.pts1 = 0x00; - ptsreq.pts2 = 0x00; - ptsreq.pts3 = 0x00; - if (set_protocol(dev, &ptsreq) == 0) { - DEBUGP(4, dev, "AUTOPPS ret SUCC\n"); - clear_bit(IS_AUTOPPS_ACT, &dev->flags); - wake_up_interruptible(&dev->atrq); - } else { - DEBUGP(4, dev, "AUTOPPS failed: " - "repower using defaults\n"); - /* prepare for repowering */ - clear_bit(IS_ATR_PRESENT, &dev->flags); - clear_bit(IS_ATR_VALID, &dev->flags); - dev->rlen = - dev->rpos = - dev->atr_csum = - dev->atr_len_retry = dev->cwarn = 0; - dev->mstate = M_FETCH_ATR; - - dev->mdelay = T_50MSEC; - } - } else { - /* for cards which use slightly different - * params (extra guard time) */ - set_cardparameter(dev); - if (test_bit(IS_AUTOPPS_ACT, &dev->flags) == 1) - DEBUGP(4, dev, "AUTOPPS already active " - "2nd try:use default values\n"); - if (dev->ta1 == 0x11) - DEBUGP(4, dev, "No AUTOPPS necessary " - "TA(1)==0x11\n"); - if (test_bit(IS_ANY_T0, &dev->flags) - && test_bit(IS_ANY_T1, &dev->flags)) - DEBUGP(4, dev, "Do NOT perform AUTOPPS " - "with multiprotocol cards\n"); - clear_bit(IS_AUTOPPS_ACT, &dev->flags); - wake_up_interruptible(&dev->atrq); - } - } else { - DEBUGP(4, dev, "ATR invalid\n"); - wake_up_interruptible(&dev->atrq); - } - break; - case M_BAD_CARD: - DEBUGP(4, dev, "M_BAD_CARD\n"); - /* slow down warning, but prompt immediately after insertion */ - if (dev->cwarn == 0 || dev->cwarn == 10) { - set_bit(IS_BAD_CARD, &dev->flags); - dev_warn(&dev->p_dev->dev, MODULE_NAME ": "); - if (test_bit(IS_BAD_CSUM, &dev->flags)) { - DEBUGP(4, dev, "ATR checksum (0x%.2x, should " - "be zero) failed\n", dev->atr_csum); - } -#ifdef CM4000_DEBUG - else if (test_bit(IS_BAD_LENGTH, &dev->flags)) { - DEBUGP(4, dev, "ATR length error\n"); - } else { - DEBUGP(4, dev, "card damaged or wrong way " - "inserted\n"); - } -#endif - dev->cwarn = 0; - wake_up_interruptible(&dev->atrq); /* wake open */ - } - dev->cwarn++; - dev->mdelay = T_100MSEC; - dev->mstate = M_FETCH_ATR; - break; - default: - DEBUGP(7, dev, "Unknown action\n"); - break; /* nothing */ - } - -release_io: - DEBUGP(7, dev, "release_io\n"); - clear_bit(LOCK_IO, &dev->flags); - wake_up_interruptible(&dev->ioq); /* whoever needs IO */ - -return_with_timer: - DEBUGP(7, dev, "<- monitor_card (returns with timer)\n"); - mod_timer(&dev->timer, jiffies + dev->mdelay); - clear_bit(LOCK_MONITOR, &dev->flags); -} - -/* Interface to userland (file_operations) */ - -static ssize_t cmm_read(struct file *filp, __user char *buf, size_t count, - loff_t *ppos) -{ - struct cm4000_dev *dev = filp->private_data; - unsigned int iobase = dev->p_dev->resource[0]->start; - ssize_t rc; - int i, j, k; - - DEBUGP(2, dev, "-> cmm_read(%s,%d)\n", current->comm, current->pid); - - if (count == 0) /* according to manpage */ - return 0; - - if (!pcmcia_dev_present(dev->p_dev) || /* device removed */ - test_bit(IS_CMM_ABSENT, &dev->flags)) - return -ENODEV; - - if (test_bit(IS_BAD_CSUM, &dev->flags)) - return -EIO; - - /* also see the note about this in cmm_write */ - if (wait_event_interruptible - (dev->atrq, - ((filp->f_flags & O_NONBLOCK) - || (test_bit(IS_ATR_PRESENT, (void *)&dev->flags) != 0)))) { - if (filp->f_flags & O_NONBLOCK) - return -EAGAIN; - return -ERESTARTSYS; - } - - if (test_bit(IS_ATR_VALID, &dev->flags) == 0) - return -EIO; - - /* this one implements blocking IO */ - if (wait_event_interruptible - (dev->readq, - ((filp->f_flags & O_NONBLOCK) || (dev->rpos < dev->rlen)))) { - if (filp->f_flags & O_NONBLOCK) - return -EAGAIN; - return -ERESTARTSYS; - } - - /* lock io */ - if (wait_event_interruptible - (dev->ioq, - ((filp->f_flags & O_NONBLOCK) - || (test_and_set_bit(LOCK_IO, (void *)&dev->flags) == 0)))) { - if (filp->f_flags & O_NONBLOCK) - return -EAGAIN; - return -ERESTARTSYS; - } - - rc = 0; - dev->flags0 = inb(REG_FLAGS0(iobase)); - if ((dev->flags0 & 1) == 0 /* no smartcard inserted */ - || dev->flags0 == 0xff) { /* no cardman inserted */ - clear_bit(IS_ATR_VALID, &dev->flags); - if (dev->flags0 & 1) { - set_bit(IS_CMM_ABSENT, &dev->flags); - rc = -ENODEV; - } else { - rc = -EIO; - } - goto release_io; - } - - DEBUGP(4, dev, "begin read answer\n"); - j = min(count, (size_t)(dev->rlen - dev->rpos)); - k = dev->rpos; - if (k + j > 255) - j = 256 - k; - DEBUGP(4, dev, "read1 j=%d\n", j); - for (i = 0; i < j; i++) { - xoutb(k++, REG_BUF_ADDR(iobase)); - dev->rbuf[i] = xinb(REG_BUF_DATA(iobase)); - } - j = min(count, (size_t)(dev->rlen - dev->rpos)); - if (k + j > 255) { - DEBUGP(4, dev, "read2 j=%d\n", j); - dev->flags1 |= 0x10; /* MSB buf addr set */ - xoutb(dev->flags1, REG_FLAGS1(iobase)); - for (; i < j; i++) { - xoutb(k++, REG_BUF_ADDR(iobase)); - dev->rbuf[i] = xinb(REG_BUF_DATA(iobase)); - } - } - - if (dev->proto == 0 && count > dev->rlen - dev->rpos && i) { - DEBUGP(4, dev, "T=0 and count > buffer\n"); - dev->rbuf[i] = dev->rbuf[i - 1]; - dev->rbuf[i - 1] = dev->procbyte; - j++; - } - count = j; - - dev->rpos = dev->rlen + 1; - - /* Clear T1Active */ - DEBUGP(4, dev, "Clear T1Active\n"); - dev->flags1 &= 0xdf; - xoutb(dev->flags1, REG_FLAGS1(iobase)); - - xoutb(0, REG_FLAGS1(iobase)); /* clear detectCMM */ - /* last check before exit */ - if (!io_detect_cm4000(iobase, dev)) { - rc = -ENODEV; - goto release_io; - } - - if (test_bit(IS_INVREV, &dev->flags) && count > 0) - str_invert_revert(dev->rbuf, count); - - if (copy_to_user(buf, dev->rbuf, count)) - rc = -EFAULT; - -release_io: - clear_bit(LOCK_IO, &dev->flags); - wake_up_interruptible(&dev->ioq); - - DEBUGP(2, dev, "<- cmm_read returns: rc = %zi\n", - (rc < 0 ? rc : count)); - return rc < 0 ? rc : count; -} - -static ssize_t cmm_write(struct file *filp, const char __user *buf, - size_t count, loff_t *ppos) -{ - struct cm4000_dev *dev = filp->private_data; - unsigned int iobase = dev->p_dev->resource[0]->start; - unsigned short s; - unsigned char infolen; - unsigned char sendT0; - unsigned short nsend; - unsigned short nr; - ssize_t rc; - int i; - - DEBUGP(2, dev, "-> cmm_write(%s,%d)\n", current->comm, current->pid); - - if (count == 0) /* according to manpage */ - return 0; - - if (dev->proto == 0 && count < 4) { - /* T0 must have at least 4 bytes */ - DEBUGP(4, dev, "T0 short write\n"); - return -EIO; - } - - nr = count & 0x1ff; /* max bytes to write */ - - sendT0 = dev->proto ? 0 : nr > 5 ? 0x08 : 0; - - if (!pcmcia_dev_present(dev->p_dev) || /* device removed */ - test_bit(IS_CMM_ABSENT, &dev->flags)) - return -ENODEV; - - if (test_bit(IS_BAD_CSUM, &dev->flags)) { - DEBUGP(4, dev, "bad csum\n"); - return -EIO; - } - - /* - * wait for atr to become valid. - * note: it is important to lock this code. if we dont, the monitor - * could be run between test_bit and the call to sleep on the - * atr-queue. if *then* the monitor detects atr valid, it will wake up - * any process on the atr-queue, *but* since we have been interrupted, - * we do not yet sleep on this queue. this would result in a missed - * wake_up and the calling process would sleep forever (until - * interrupted). also, do *not* restore_flags before sleep_on, because - * this could result in the same situation! - */ - if (wait_event_interruptible - (dev->atrq, - ((filp->f_flags & O_NONBLOCK) - || (test_bit(IS_ATR_PRESENT, (void *)&dev->flags) != 0)))) { - if (filp->f_flags & O_NONBLOCK) - return -EAGAIN; - return -ERESTARTSYS; - } - - if (test_bit(IS_ATR_VALID, &dev->flags) == 0) { /* invalid atr */ - DEBUGP(4, dev, "invalid ATR\n"); - return -EIO; - } - - /* lock io */ - if (wait_event_interruptible - (dev->ioq, - ((filp->f_flags & O_NONBLOCK) - || (test_and_set_bit(LOCK_IO, (void *)&dev->flags) == 0)))) { - if (filp->f_flags & O_NONBLOCK) - return -EAGAIN; - return -ERESTARTSYS; - } - - if (copy_from_user(dev->sbuf, buf, ((count > 512) ? 512 : count))) - return -EFAULT; - - rc = 0; - dev->flags0 = inb(REG_FLAGS0(iobase)); - if ((dev->flags0 & 1) == 0 /* no smartcard inserted */ - || dev->flags0 == 0xff) { /* no cardman inserted */ - clear_bit(IS_ATR_VALID, &dev->flags); - if (dev->flags0 & 1) { - set_bit(IS_CMM_ABSENT, &dev->flags); - rc = -ENODEV; - } else { - DEBUGP(4, dev, "IO error\n"); - rc = -EIO; - } - goto release_io; - } - - xoutb(0x80, REG_FLAGS0(iobase)); /* reset SM */ - - if (!io_detect_cm4000(iobase, dev)) { - rc = -ENODEV; - goto release_io; - } - - /* reflect T=0 send/read mode in flags1 */ - dev->flags1 |= (sendT0); - - set_cardparameter(dev); - - /* dummy read, reset flag procedure received */ - inb(REG_FLAGS1(iobase)); - - dev->flags1 = 0x20 /* T_Active */ - | (sendT0) - | (test_bit(IS_INVREV, &dev->flags) ? 2 : 0)/* inverse parity */ - | (((dev->baudv - 1) & 0x0100) >> 8); /* MSB-Baud */ - DEBUGP(1, dev, "set dev->flags1 = 0x%.2x\n", dev->flags1); - xoutb(dev->flags1, REG_FLAGS1(iobase)); - - /* xmit data */ - DEBUGP(4, dev, "Xmit data\n"); - for (i = 0; i < nr; i++) { - if (i >= 256) { - dev->flags1 = 0x20 /* T_Active */ - | (sendT0) /* SendT0 */ - /* inverse parity: */ - | (test_bit(IS_INVREV, &dev->flags) ? 2 : 0) - | (((dev->baudv - 1) & 0x0100) >> 8) /* MSB-Baud */ - | 0x10; /* set address high */ - DEBUGP(4, dev, "dev->flags = 0x%.2x - set address " - "high\n", dev->flags1); - xoutb(dev->flags1, REG_FLAGS1(iobase)); - } - if (test_bit(IS_INVREV, &dev->flags)) { - DEBUGP(4, dev, "Apply inverse convention for 0x%.2x " - "-> 0x%.2x\n", (unsigned char)dev->sbuf[i], - invert_revert(dev->sbuf[i])); - xoutb(i, REG_BUF_ADDR(iobase)); - xoutb(invert_revert(dev->sbuf[i]), - REG_BUF_DATA(iobase)); - } else { - xoutb(i, REG_BUF_ADDR(iobase)); - xoutb(dev->sbuf[i], REG_BUF_DATA(iobase)); - } - } - DEBUGP(4, dev, "Xmit done\n"); - - if (dev->proto == 0) { - /* T=0 proto: 0 byte reply */ - if (nr == 4) { - DEBUGP(4, dev, "T=0 assumes 0 byte reply\n"); - xoutb(i, REG_BUF_ADDR(iobase)); - if (test_bit(IS_INVREV, &dev->flags)) - xoutb(0xff, REG_BUF_DATA(iobase)); - else - xoutb(0x00, REG_BUF_DATA(iobase)); - } - - /* numSendBytes */ - if (sendT0) - nsend = nr; - else { - if (nr == 4) - nsend = 5; - else { - nsend = 5 + (unsigned char)dev->sbuf[4]; - if (dev->sbuf[4] == 0) - nsend += 0x100; - } - } - } else - nsend = nr; - - /* T0: output procedure byte */ - if (test_bit(IS_INVREV, &dev->flags)) { - DEBUGP(4, dev, "T=0 set Procedure byte (inverse-reverse) " - "0x%.2x\n", invert_revert(dev->sbuf[1])); - xoutb(invert_revert(dev->sbuf[1]), REG_NUM_BYTES(iobase)); - } else { - DEBUGP(4, dev, "T=0 set Procedure byte 0x%.2x\n", dev->sbuf[1]); - xoutb(dev->sbuf[1], REG_NUM_BYTES(iobase)); - } - - DEBUGP(1, dev, "set NumSendBytes = 0x%.2x\n", - (unsigned char)(nsend & 0xff)); - xoutb((unsigned char)(nsend & 0xff), REG_NUM_SEND(iobase)); - - DEBUGP(1, dev, "Trigger CARDMAN CONTROLLER (0x%.2x)\n", - 0x40 /* SM_Active */ - | (dev->flags0 & 2 ? 0 : 4) /* power on if needed */ - |(dev->proto ? 0x10 : 0x08) /* T=1/T=0 */ - |(nsend & 0x100) >> 8 /* MSB numSendBytes */ ); - xoutb(0x40 /* SM_Active */ - | (dev->flags0 & 2 ? 0 : 4) /* power on if needed */ - |(dev->proto ? 0x10 : 0x08) /* T=1/T=0 */ - |(nsend & 0x100) >> 8, /* MSB numSendBytes */ - REG_FLAGS0(iobase)); - - /* wait for xmit done */ - if (dev->proto == 1) { - DEBUGP(4, dev, "Wait for xmit done\n"); - for (i = 0; i < 1000; i++) { - if (inb(REG_FLAGS0(iobase)) & 0x08) - break; - msleep_interruptible(10); - } - if (i == 1000) { - DEBUGP(4, dev, "timeout waiting for xmit done\n"); - rc = -EIO; - goto release_io; - } - } - - /* T=1: wait for infoLen */ - - infolen = 0; - if (dev->proto) { - /* wait until infoLen is valid */ - for (i = 0; i < 6000; i++) { /* max waiting time of 1 min */ - io_read_num_rec_bytes(iobase, &s); - if (s >= 3) { - infolen = inb(REG_FLAGS1(iobase)); - DEBUGP(4, dev, "infolen=%d\n", infolen); - break; - } - msleep_interruptible(10); - } - if (i == 6000) { - DEBUGP(4, dev, "timeout waiting for infoLen\n"); - rc = -EIO; - goto release_io; - } - } else - clear_bit(IS_PROCBYTE_PRESENT, &dev->flags); - - /* numRecBytes | bit9 of numRecytes */ - io_read_num_rec_bytes(iobase, &dev->rlen); - for (i = 0; i < 600; i++) { /* max waiting time of 2 sec */ - if (dev->proto) { - if (dev->rlen >= infolen + 4) - break; - } - msleep_interruptible(10); - /* numRecBytes | bit9 of numRecytes */ - io_read_num_rec_bytes(iobase, &s); - if (s > dev->rlen) { - DEBUGP(1, dev, "NumRecBytes inc (reset timeout)\n"); - i = 0; /* reset timeout */ - dev->rlen = s; - } - /* T=0: we are done when numRecBytes doesn't - * increment any more and NoProcedureByte - * is set and numRecBytes == bytes sent + 6 - * (header bytes + data + 1 for sw2) - * except when the card replies an error - * which means, no data will be sent back. - */ - else if (dev->proto == 0) { - if ((inb(REG_BUF_ADDR(iobase)) & 0x80)) { - /* no procedure byte received since last read */ - DEBUGP(1, dev, "NoProcedure byte set\n"); - /* i=0; */ - } else { - /* procedure byte received since last read */ - DEBUGP(1, dev, "NoProcedure byte unset " - "(reset timeout)\n"); - dev->procbyte = inb(REG_FLAGS1(iobase)); - DEBUGP(1, dev, "Read procedure byte 0x%.2x\n", - dev->procbyte); - i = 0; /* resettimeout */ - } - if (inb(REG_FLAGS0(iobase)) & 0x08) { - DEBUGP(1, dev, "T0Done flag (read reply)\n"); - break; - } - } - if (dev->proto) - infolen = inb(REG_FLAGS1(iobase)); - } - if (i == 600) { - DEBUGP(1, dev, "timeout waiting for numRecBytes\n"); - rc = -EIO; - goto release_io; - } else { - if (dev->proto == 0) { - DEBUGP(1, dev, "Wait for T0Done bit to be set\n"); - for (i = 0; i < 1000; i++) { - if (inb(REG_FLAGS0(iobase)) & 0x08) - break; - msleep_interruptible(10); - } - if (i == 1000) { - DEBUGP(1, dev, "timeout waiting for T0Done\n"); - rc = -EIO; - goto release_io; - } - - dev->procbyte = inb(REG_FLAGS1(iobase)); - DEBUGP(4, dev, "Read procedure byte 0x%.2x\n", - dev->procbyte); - - io_read_num_rec_bytes(iobase, &dev->rlen); - DEBUGP(4, dev, "Read NumRecBytes = %i\n", dev->rlen); - - } - } - /* T=1: read offset=zero, T=0: read offset=after challenge */ - dev->rpos = dev->proto ? 0 : nr == 4 ? 5 : nr > dev->rlen ? 5 : nr; - DEBUGP(4, dev, "dev->rlen = %i, dev->rpos = %i, nr = %i\n", - dev->rlen, dev->rpos, nr); - -release_io: - DEBUGP(4, dev, "Reset SM\n"); - xoutb(0x80, REG_FLAGS0(iobase)); /* reset SM */ - - if (rc < 0) { - DEBUGP(4, dev, "Write failed but clear T_Active\n"); - dev->flags1 &= 0xdf; - xoutb(dev->flags1, REG_FLAGS1(iobase)); - } - - clear_bit(LOCK_IO, &dev->flags); - wake_up_interruptible(&dev->ioq); - wake_up_interruptible(&dev->readq); /* tell read we have data */ - - /* ITSEC E2: clear write buffer */ - memset((char *)dev->sbuf, 0, 512); - - /* return error or actually written bytes */ - DEBUGP(2, dev, "<- cmm_write\n"); - return rc < 0 ? rc : nr; -} - -static void start_monitor(struct cm4000_dev *dev) -{ - DEBUGP(3, dev, "-> start_monitor\n"); - if (!dev->monitor_running) { - DEBUGP(5, dev, "create, init and add timer\n"); - timer_setup(&dev->timer, monitor_card, 0); - dev->monitor_running = 1; - mod_timer(&dev->timer, jiffies); - } else - DEBUGP(5, dev, "monitor already running\n"); - DEBUGP(3, dev, "<- start_monitor\n"); -} - -static void stop_monitor(struct cm4000_dev *dev) -{ - DEBUGP(3, dev, "-> stop_monitor\n"); - if (dev->monitor_running) { - DEBUGP(5, dev, "stopping monitor\n"); - terminate_monitor(dev); - /* reset monitor SM */ - clear_bit(IS_ATR_VALID, &dev->flags); - clear_bit(IS_ATR_PRESENT, &dev->flags); - } else - DEBUGP(5, dev, "monitor already stopped\n"); - DEBUGP(3, dev, "<- stop_monitor\n"); -} - -static long cmm_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) -{ - struct cm4000_dev *dev = filp->private_data; - unsigned int iobase = dev->p_dev->resource[0]->start; - struct inode *inode = file_inode(filp); - struct pcmcia_device *link; - int rc; - void __user *argp = (void __user *)arg; -#ifdef CM4000_DEBUG - char *ioctl_names[CM_IOC_MAXNR + 1] = { - [_IOC_NR(CM_IOCGSTATUS)] "CM_IOCGSTATUS", - [_IOC_NR(CM_IOCGATR)] "CM_IOCGATR", - [_IOC_NR(CM_IOCARDOFF)] "CM_IOCARDOFF", - [_IOC_NR(CM_IOCSPTS)] "CM_IOCSPTS", - [_IOC_NR(CM_IOSDBGLVL)] "CM4000_DBGLVL", - }; - DEBUGP(3, dev, "cmm_ioctl(device=%d.%d) %s\n", imajor(inode), - iminor(inode), ioctl_names[_IOC_NR(cmd)]); -#endif - - mutex_lock(&cmm_mutex); - rc = -ENODEV; - link = dev_table[iminor(inode)]; - if (!pcmcia_dev_present(link)) { - DEBUGP(4, dev, "DEV_OK false\n"); - goto out; - } - - if (test_bit(IS_CMM_ABSENT, &dev->flags)) { - DEBUGP(4, dev, "CMM_ABSENT flag set\n"); - goto out; - } - rc = -EINVAL; - - if (_IOC_TYPE(cmd) != CM_IOC_MAGIC) { - DEBUGP(4, dev, "ioctype mismatch\n"); - goto out; - } - if (_IOC_NR(cmd) > CM_IOC_MAXNR) { - DEBUGP(4, dev, "iocnr mismatch\n"); - goto out; - } - rc = 0; - - switch (cmd) { - case CM_IOCGSTATUS: - DEBUGP(4, dev, " ... in CM_IOCGSTATUS\n"); - { - int status; - - /* clear other bits, but leave inserted & powered as - * they are */ - status = dev->flags0 & 3; - if (test_bit(IS_ATR_PRESENT, &dev->flags)) - status |= CM_ATR_PRESENT; - if (test_bit(IS_ATR_VALID, &dev->flags)) - status |= CM_ATR_VALID; - if (test_bit(IS_CMM_ABSENT, &dev->flags)) - status |= CM_NO_READER; - if (test_bit(IS_BAD_CARD, &dev->flags)) - status |= CM_BAD_CARD; - if (copy_to_user(argp, &status, sizeof(int))) - rc = -EFAULT; - } - break; - case CM_IOCGATR: - DEBUGP(4, dev, "... in CM_IOCGATR\n"); - { - struct atreq __user *atreq = argp; - int tmp; - /* allow nonblocking io and being interrupted */ - if (wait_event_interruptible - (dev->atrq, - ((filp->f_flags & O_NONBLOCK) - || (test_bit(IS_ATR_PRESENT, (void *)&dev->flags) - != 0)))) { - if (filp->f_flags & O_NONBLOCK) - rc = -EAGAIN; - else - rc = -ERESTARTSYS; - break; - } - - rc = -EFAULT; - if (test_bit(IS_ATR_VALID, &dev->flags) == 0) { - tmp = -1; - if (copy_to_user(&(atreq->atr_len), &tmp, - sizeof(int))) - break; - } else { - if (copy_to_user(atreq->atr, dev->atr, - dev->atr_len)) - break; - - tmp = dev->atr_len; - if (copy_to_user(&(atreq->atr_len), &tmp, sizeof(int))) - break; - } - rc = 0; - break; - } - case CM_IOCARDOFF: - -#ifdef CM4000_DEBUG - DEBUGP(4, dev, "... in CM_IOCARDOFF\n"); - if (dev->flags0 & 0x01) { - DEBUGP(4, dev, " Card inserted\n"); - } else { - DEBUGP(2, dev, " No card inserted\n"); - } - if (dev->flags0 & 0x02) { - DEBUGP(4, dev, " Card powered\n"); - } else { - DEBUGP(2, dev, " Card not powered\n"); - } -#endif - - /* is a card inserted and powered? */ - if ((dev->flags0 & 0x01) && (dev->flags0 & 0x02)) { - - /* get IO lock */ - if (wait_event_interruptible - (dev->ioq, - ((filp->f_flags & O_NONBLOCK) - || (test_and_set_bit(LOCK_IO, (void *)&dev->flags) - == 0)))) { - if (filp->f_flags & O_NONBLOCK) - rc = -EAGAIN; - else - rc = -ERESTARTSYS; - break; - } - /* Set Flags0 = 0x42 */ - DEBUGP(4, dev, "Set Flags0=0x42 \n"); - xoutb(0x42, REG_FLAGS0(iobase)); - clear_bit(IS_ATR_PRESENT, &dev->flags); - clear_bit(IS_ATR_VALID, &dev->flags); - dev->mstate = M_CARDOFF; - clear_bit(LOCK_IO, &dev->flags); - if (wait_event_interruptible - (dev->atrq, - ((filp->f_flags & O_NONBLOCK) - || (test_bit(IS_ATR_VALID, (void *)&dev->flags) != - 0)))) { - if (filp->f_flags & O_NONBLOCK) - rc = -EAGAIN; - else - rc = -ERESTARTSYS; - break; - } - } - /* release lock */ - clear_bit(LOCK_IO, &dev->flags); - wake_up_interruptible(&dev->ioq); - - rc = 0; - break; - case CM_IOCSPTS: - { - struct ptsreq krnptsreq; - - if (copy_from_user(&krnptsreq, argp, - sizeof(struct ptsreq))) { - rc = -EFAULT; - break; - } - - rc = 0; - DEBUGP(4, dev, "... in CM_IOCSPTS\n"); - /* wait for ATR to get valid */ - if (wait_event_interruptible - (dev->atrq, - ((filp->f_flags & O_NONBLOCK) - || (test_bit(IS_ATR_PRESENT, (void *)&dev->flags) - != 0)))) { - if (filp->f_flags & O_NONBLOCK) - rc = -EAGAIN; - else - rc = -ERESTARTSYS; - break; - } - /* get IO lock */ - if (wait_event_interruptible - (dev->ioq, - ((filp->f_flags & O_NONBLOCK) - || (test_and_set_bit(LOCK_IO, (void *)&dev->flags) - == 0)))) { - if (filp->f_flags & O_NONBLOCK) - rc = -EAGAIN; - else - rc = -ERESTARTSYS; - break; - } - - if ((rc = set_protocol(dev, &krnptsreq)) != 0) { - /* auto power_on again */ - dev->mstate = M_FETCH_ATR; - clear_bit(IS_ATR_VALID, &dev->flags); - } - /* release lock */ - clear_bit(LOCK_IO, &dev->flags); - wake_up_interruptible(&dev->ioq); - - } - break; -#ifdef CM4000_DEBUG - case CM_IOSDBGLVL: - rc = -ENOTTY; - break; -#endif - default: - DEBUGP(4, dev, "... in default (unknown IOCTL code)\n"); - rc = -ENOTTY; - } -out: - mutex_unlock(&cmm_mutex); - return rc; -} - -static int cmm_open(struct inode *inode, struct file *filp) -{ - struct cm4000_dev *dev; - struct pcmcia_device *link; - int minor = iminor(inode); - int ret; - - if (minor >= CM4000_MAX_DEV) - return -ENODEV; - - mutex_lock(&cmm_mutex); - link = dev_table[minor]; - if (link == NULL || !pcmcia_dev_present(link)) { - ret = -ENODEV; - goto out; - } - - if (link->open) { - ret = -EBUSY; - goto out; - } - - dev = link->priv; - filp->private_data = dev; - - DEBUGP(2, dev, "-> cmm_open(device=%d.%d process=%s,%d)\n", - imajor(inode), minor, current->comm, current->pid); - - /* init device variables, they may be "polluted" after close - * or, the device may never have been closed (i.e. open failed) - */ - - ZERO_DEV(dev); - - /* opening will always block since the - * monitor will be started by open, which - * means we have to wait for ATR becoming - * valid = block until valid (or card - * inserted) - */ - if (filp->f_flags & O_NONBLOCK) { - ret = -EAGAIN; - goto out; - } - - dev->mdelay = T_50MSEC; - - /* start monitoring the cardstatus */ - start_monitor(dev); - - link->open = 1; /* only one open per device */ - - DEBUGP(2, dev, "<- cmm_open\n"); - ret = stream_open(inode, filp); -out: - mutex_unlock(&cmm_mutex); - return ret; -} - -static int cmm_close(struct inode *inode, struct file *filp) -{ - struct cm4000_dev *dev; - struct pcmcia_device *link; - int minor = iminor(inode); - - if (minor >= CM4000_MAX_DEV) - return -ENODEV; - - link = dev_table[minor]; - if (link == NULL) - return -ENODEV; - - dev = link->priv; - - DEBUGP(2, dev, "-> cmm_close(maj/min=%d.%d)\n", - imajor(inode), minor); - - stop_monitor(dev); - - ZERO_DEV(dev); - - link->open = 0; /* only one open per device */ - wake_up(&dev->devq); /* socket removed? */ - - DEBUGP(2, dev, "cmm_close\n"); - return 0; -} - -static void cmm_cm4000_release(struct pcmcia_device * link) -{ - struct cm4000_dev *dev = link->priv; - - /* dont terminate the monitor, rather rely on - * close doing that for us. - */ - DEBUGP(3, dev, "-> cmm_cm4000_release\n"); - while (link->open) { - printk(KERN_INFO MODULE_NAME ": delaying release until " - "process has terminated\n"); - /* note: don't interrupt us: - * close the applications which own - * the devices _first_ ! - */ - wait_event(dev->devq, (link->open == 0)); - } - /* dev->devq=NULL; this cannot be zeroed earlier */ - DEBUGP(3, dev, "<- cmm_cm4000_release\n"); - return; -} - -/*==== Interface to PCMCIA Layer =======================================*/ - -static int cm4000_config_check(struct pcmcia_device *p_dev, void *priv_data) -{ - return pcmcia_request_io(p_dev); -} - -static int cm4000_config(struct pcmcia_device * link, int devno) -{ - link->config_flags |= CONF_AUTO_SET_IO; - - /* read the config-tuples */ - if (pcmcia_loop_config(link, cm4000_config_check, NULL)) - goto cs_release; - - if (pcmcia_enable_device(link)) - goto cs_release; - - return 0; - -cs_release: - cm4000_release(link); - return -ENODEV; -} - -static int cm4000_suspend(struct pcmcia_device *link) -{ - struct cm4000_dev *dev; - - dev = link->priv; - stop_monitor(dev); - - return 0; -} - -static int cm4000_resume(struct pcmcia_device *link) -{ - struct cm4000_dev *dev; - - dev = link->priv; - if (link->open) - start_monitor(dev); - - return 0; -} - -static void cm4000_release(struct pcmcia_device *link) -{ - cmm_cm4000_release(link); /* delay release until device closed */ - pcmcia_disable_device(link); -} - -static int cm4000_probe(struct pcmcia_device *link) -{ - struct cm4000_dev *dev; - int i, ret; - - for (i = 0; i < CM4000_MAX_DEV; i++) - if (dev_table[i] == NULL) - break; - - if (i == CM4000_MAX_DEV) { - printk(KERN_NOTICE MODULE_NAME ": all devices in use\n"); - return -ENODEV; - } - - /* create a new cm4000_cs device */ - dev = kzalloc(sizeof(struct cm4000_dev), GFP_KERNEL); - if (dev == NULL) - return -ENOMEM; - - dev->p_dev = link; - link->priv = dev; - dev_table[i] = link; - - init_waitqueue_head(&dev->devq); - init_waitqueue_head(&dev->ioq); - init_waitqueue_head(&dev->atrq); - init_waitqueue_head(&dev->readq); - - ret = cm4000_config(link, i); - if (ret) { - dev_table[i] = NULL; - kfree(dev); - return ret; - } - - device_create(cmm_class, NULL, MKDEV(major, i), NULL, "cmm%d", i); - - return 0; -} - -static void cm4000_detach(struct pcmcia_device *link) -{ - struct cm4000_dev *dev = link->priv; - int devno; - - /* find device */ - for (devno = 0; devno < CM4000_MAX_DEV; devno++) - if (dev_table[devno] == link) - break; - if (devno == CM4000_MAX_DEV) - return; - - stop_monitor(dev); - - cm4000_release(link); - - dev_table[devno] = NULL; - kfree(dev); - - device_destroy(cmm_class, MKDEV(major, devno)); - - return; -} - -static const struct file_operations cm4000_fops = { - .owner = THIS_MODULE, - .read = cmm_read, - .write = cmm_write, - .unlocked_ioctl = cmm_ioctl, - .open = cmm_open, - .release= cmm_close, - .llseek = no_llseek, -}; - -static const struct pcmcia_device_id cm4000_ids[] = { - PCMCIA_DEVICE_MANF_CARD(0x0223, 0x0002), - PCMCIA_DEVICE_PROD_ID12("CardMan", "4000", 0x2FB368CA, 0xA2BD8C39), - PCMCIA_DEVICE_NULL, -}; -MODULE_DEVICE_TABLE(pcmcia, cm4000_ids); - -static struct pcmcia_driver cm4000_driver = { - .owner = THIS_MODULE, - .name = "cm4000_cs", - .probe = cm4000_probe, - .remove = cm4000_detach, - .suspend = cm4000_suspend, - .resume = cm4000_resume, - .id_table = cm4000_ids, -}; - -static int __init cmm_init(void) -{ - int rc; - - cmm_class = class_create("cardman_4000"); - if (IS_ERR(cmm_class)) - return PTR_ERR(cmm_class); - - major = register_chrdev(0, DEVICE_NAME, &cm4000_fops); - if (major < 0) { - printk(KERN_WARNING MODULE_NAME - ": could not get major number\n"); - class_destroy(cmm_class); - return major; - } - - rc = pcmcia_register_driver(&cm4000_driver); - if (rc < 0) { - unregister_chrdev(major, DEVICE_NAME); - class_destroy(cmm_class); - return rc; - } - - return 0; -} - -static void __exit cmm_exit(void) -{ - pcmcia_unregister_driver(&cm4000_driver); - unregister_chrdev(major, DEVICE_NAME); - class_destroy(cmm_class); -}; - -module_init(cmm_init); -module_exit(cmm_exit); -MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c deleted file mode 100644 index 11ff59e2b963..000000000000 --- a/drivers/char/pcmcia/cm4040_cs.c +++ /dev/null @@ -1,684 +0,0 @@ -/* - * A driver for the Omnikey PCMCIA smartcard reader CardMan 4040 - * - * (c) 2000-2004 Omnikey AG (http://www.omnikey.com/) - * - * (C) 2005-2006 Harald Welte <laforge@gnumonks.org> - * - add support for poll() - * - driver cleanup - * - add waitqueues - * - adhere to linux kernel coding style and policies - * - support 2.6.13 "new style" pcmcia interface - * - add class interface for udev device creation - * - * The device basically is a USB CCID compliant device that has been - * attached to an I/O-Mapped FIFO. - * - * All rights reserved, Dual BSD/GPL Licensed. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/fs.h> -#include <linux/delay.h> -#include <linux/poll.h> -#include <linux/mutex.h> -#include <linux/wait.h> -#include <linux/uaccess.h> -#include <asm/io.h> - -#include <pcmcia/cistpl.h> -#include <pcmcia/cisreg.h> -#include <pcmcia/ciscode.h> -#include <pcmcia/ds.h> - -#include "cm4040_cs.h" - - -#define reader_to_dev(x) (&x->p_dev->dev) - -/* n (debug level) is ignored */ -/* additional debug output may be enabled by re-compiling with - * CM4040_DEBUG set */ -/* #define CM4040_DEBUG */ -#define DEBUGP(n, rdr, x, args...) do { \ - dev_dbg(reader_to_dev(rdr), "%s:" x, \ - __func__ , ## args); \ - } while (0) - -static DEFINE_MUTEX(cm4040_mutex); - -#define CCID_DRIVER_BULK_DEFAULT_TIMEOUT (150*HZ) -#define CCID_DRIVER_ASYNC_POWERUP_TIMEOUT (35*HZ) -#define CCID_DRIVER_MINIMUM_TIMEOUT (3*HZ) -#define READ_WRITE_BUFFER_SIZE 512 -#define POLL_LOOP_COUNT 1000 - -/* how often to poll for fifo status change */ -#define POLL_PERIOD msecs_to_jiffies(10) - -static void reader_release(struct pcmcia_device *link); - -static int major; -static struct class *cmx_class; - -#define BS_READABLE 0x01 -#define BS_WRITABLE 0x02 - -struct reader_dev { - struct pcmcia_device *p_dev; - wait_queue_head_t devq; - wait_queue_head_t poll_wait; - wait_queue_head_t read_wait; - wait_queue_head_t write_wait; - unsigned long buffer_status; - unsigned long timeout; - unsigned char s_buf[READ_WRITE_BUFFER_SIZE]; - unsigned char r_buf[READ_WRITE_BUFFER_SIZE]; - struct timer_list poll_timer; -}; - -static struct pcmcia_device *dev_table[CM_MAX_DEV]; - -#ifndef CM4040_DEBUG -#define xoutb outb -#define xinb inb -#else -static inline void xoutb(unsigned char val, unsigned short port) -{ - pr_debug("outb(val=%.2x,port=%.4x)\n", val, port); - outb(val, port); -} - -static inline unsigned char xinb(unsigned short port) -{ - unsigned char val; - - val = inb(port); - pr_debug("%.2x=inb(%.4x)\n", val, port); - return val; -} -#endif - -/* poll the device fifo status register. not to be confused with - * the poll syscall. */ -static void cm4040_do_poll(struct timer_list *t) -{ - struct reader_dev *dev = from_timer(dev, t, poll_timer); - unsigned int obs = xinb(dev->p_dev->resource[0]->start - + REG_OFFSET_BUFFER_STATUS); - - if ((obs & BSR_BULK_IN_FULL)) { - set_bit(BS_READABLE, &dev->buffer_status); - DEBUGP(4, dev, "waking up read_wait\n"); - wake_up_interruptible(&dev->read_wait); - } else - clear_bit(BS_READABLE, &dev->buffer_status); - - if (!(obs & BSR_BULK_OUT_FULL)) { - set_bit(BS_WRITABLE, &dev->buffer_status); - DEBUGP(4, dev, "waking up write_wait\n"); - wake_up_interruptible(&dev->write_wait); - } else - clear_bit(BS_WRITABLE, &dev->buffer_status); - - if (dev->buffer_status) - wake_up_interruptible(&dev->poll_wait); - - mod_timer(&dev->poll_timer, jiffies + POLL_PERIOD); -} - -static void cm4040_stop_poll(struct reader_dev *dev) -{ - del_timer_sync(&dev->poll_timer); -} - -static int wait_for_bulk_out_ready(struct reader_dev *dev) -{ - int i, rc; - int iobase = dev->p_dev->resource[0]->start; - - for (i = 0; i < POLL_LOOP_COUNT; i++) { - if ((xinb(iobase + REG_OFFSET_BUFFER_STATUS) - & BSR_BULK_OUT_FULL) == 0) { - DEBUGP(4, dev, "BulkOut empty (i=%d)\n", i); - return 1; - } - } - - DEBUGP(4, dev, "wait_event_interruptible_timeout(timeout=%ld\n", - dev->timeout); - rc = wait_event_interruptible_timeout(dev->write_wait, - test_and_clear_bit(BS_WRITABLE, - &dev->buffer_status), - dev->timeout); - - if (rc > 0) - DEBUGP(4, dev, "woke up: BulkOut empty\n"); - else if (rc == 0) - DEBUGP(4, dev, "woke up: BulkOut full, returning 0 :(\n"); - else if (rc < 0) - DEBUGP(4, dev, "woke up: signal arrived\n"); - - return rc; -} - -/* Write to Sync Control Register */ -static int write_sync_reg(unsigned char val, struct reader_dev *dev) -{ - int iobase = dev->p_dev->resource[0]->start; - int rc; - - rc = wait_for_bulk_out_ready(dev); - if (rc <= 0) - return rc; - - xoutb(val, iobase + REG_OFFSET_SYNC_CONTROL); - rc = wait_for_bulk_out_ready(dev); - if (rc <= 0) - return rc; - - return 1; -} - -static int wait_for_bulk_in_ready(struct reader_dev *dev) -{ - int i, rc; - int iobase = dev->p_dev->resource[0]->start; - - for (i = 0; i < POLL_LOOP_COUNT; i++) { - if ((xinb(iobase + REG_OFFSET_BUFFER_STATUS) - & BSR_BULK_IN_FULL) == BSR_BULK_IN_FULL) { - DEBUGP(3, dev, "BulkIn full (i=%d)\n", i); - return 1; - } - } - - DEBUGP(4, dev, "wait_event_interruptible_timeout(timeout=%ld\n", - dev->timeout); - rc = wait_event_interruptible_timeout(dev->read_wait, - test_and_clear_bit(BS_READABLE, - &dev->buffer_status), - dev->timeout); - if (rc > 0) - DEBUGP(4, dev, "woke up: BulkIn full\n"); - else if (rc == 0) - DEBUGP(4, dev, "woke up: BulkIn not full, returning 0 :(\n"); - else if (rc < 0) - DEBUGP(4, dev, "woke up: signal arrived\n"); - - return rc; -} - -static ssize_t cm4040_read(struct file *filp, char __user *buf, - size_t count, loff_t *ppos) -{ - struct reader_dev *dev = filp->private_data; - int iobase = dev->p_dev->resource[0]->start; - size_t bytes_to_read; - unsigned long i; - size_t min_bytes_to_read; - int rc; - - DEBUGP(2, dev, "-> cm4040_read(%s,%d)\n", current->comm, current->pid); - - if (count == 0) - return 0; - - if (count < 10) - return -EFAULT; - - if (filp->f_flags & O_NONBLOCK) { - DEBUGP(4, dev, "filep->f_flags O_NONBLOCK set\n"); - DEBUGP(2, dev, "<- cm4040_read (failure)\n"); - return -EAGAIN; - } - - if (!pcmcia_dev_present(dev->p_dev)) - return -ENODEV; - - for (i = 0; i < 5; i++) { - rc = wait_for_bulk_in_ready(dev); - if (rc <= 0) { - DEBUGP(5, dev, "wait_for_bulk_in_ready rc=%.2x\n", rc); - DEBUGP(2, dev, "<- cm4040_read (failed)\n"); - if (rc == -ERESTARTSYS) - return rc; - return -EIO; - } - dev->r_buf[i] = xinb(iobase + REG_OFFSET_BULK_IN); -#ifdef CM4040_DEBUG - pr_debug("%lu:%2x ", i, dev->r_buf[i]); - } - pr_debug("\n"); -#else - } -#endif - - bytes_to_read = 5 + le32_to_cpu(*(__le32 *)&dev->r_buf[1]); - - DEBUGP(6, dev, "BytesToRead=%zu\n", bytes_to_read); - - min_bytes_to_read = min(count, bytes_to_read + 5); - min_bytes_to_read = min_t(size_t, min_bytes_to_read, READ_WRITE_BUFFER_SIZE); - - DEBUGP(6, dev, "Min=%zu\n", min_bytes_to_read); - - for (i = 0; i < (min_bytes_to_read-5); i++) { - rc = wait_for_bulk_in_ready(dev); - if (rc <= 0) { - DEBUGP(5, dev, "wait_for_bulk_in_ready rc=%.2x\n", rc); - DEBUGP(2, dev, "<- cm4040_read (failed)\n"); - if (rc == -ERESTARTSYS) - return rc; - return -EIO; - } - dev->r_buf[i+5] = xinb(iobase + REG_OFFSET_BULK_IN); -#ifdef CM4040_DEBUG - pr_debug("%lu:%2x ", i, dev->r_buf[i]); - } - pr_debug("\n"); -#else - } -#endif - - *ppos = min_bytes_to_read; - if (copy_to_user(buf, dev->r_buf, min_bytes_to_read)) - return -EFAULT; - - rc = wait_for_bulk_in_ready(dev); - if (rc <= 0) { - DEBUGP(5, dev, "wait_for_bulk_in_ready rc=%.2x\n", rc); - DEBUGP(2, dev, "<- cm4040_read (failed)\n"); - if (rc == -ERESTARTSYS) - return rc; - return -EIO; - } - - rc = write_sync_reg(SCR_READER_TO_HOST_DONE, dev); - if (rc <= 0) { - DEBUGP(5, dev, "write_sync_reg c=%.2x\n", rc); - DEBUGP(2, dev, "<- cm4040_read (failed)\n"); - if (rc == -ERESTARTSYS) - return rc; - else - return -EIO; - } - - xinb(iobase + REG_OFFSET_BULK_IN); - - DEBUGP(2, dev, "<- cm4040_read (successfully)\n"); - return min_bytes_to_read; -} - -static ssize_t cm4040_write(struct file *filp, const char __user *buf, - size_t count, loff_t *ppos) -{ - struct reader_dev *dev = filp->private_data; - int iobase = dev->p_dev->resource[0]->start; - ssize_t rc; - int i; - unsigned int bytes_to_write; - - DEBUGP(2, dev, "-> cm4040_write(%s,%d)\n", current->comm, current->pid); - - if (count == 0) { - DEBUGP(2, dev, "<- cm4040_write empty read (successfully)\n"); - return 0; - } - - if ((count < 5) || (count > READ_WRITE_BUFFER_SIZE)) { - DEBUGP(2, dev, "<- cm4040_write buffersize=%zd < 5\n", count); - return -EIO; - } - - if (filp->f_flags & O_NONBLOCK) { - DEBUGP(4, dev, "filep->f_flags O_NONBLOCK set\n"); - DEBUGP(4, dev, "<- cm4040_write (failure)\n"); - return -EAGAIN; - } - - if (!pcmcia_dev_present(dev->p_dev)) - return -ENODEV; - - bytes_to_write = count; - if (copy_from_user(dev->s_buf, buf, bytes_to_write)) - return -EFAULT; - - switch (dev->s_buf[0]) { - case CMD_PC_TO_RDR_XFRBLOCK: - case CMD_PC_TO_RDR_SECURE: - case CMD_PC_TO_RDR_TEST_SECURE: - case CMD_PC_TO_RDR_OK_SECURE: - dev->timeout = CCID_DRIVER_BULK_DEFAULT_TIMEOUT; - break; - - case CMD_PC_TO_RDR_ICCPOWERON: - dev->timeout = CCID_DRIVER_ASYNC_POWERUP_TIMEOUT; - break; - - case CMD_PC_TO_RDR_GETSLOTSTATUS: - case CMD_PC_TO_RDR_ICCPOWEROFF: - case CMD_PC_TO_RDR_GETPARAMETERS: - case CMD_PC_TO_RDR_RESETPARAMETERS: - case CMD_PC_TO_RDR_SETPARAMETERS: - case CMD_PC_TO_RDR_ESCAPE: - case CMD_PC_TO_RDR_ICCCLOCK: - default: - dev->timeout = CCID_DRIVER_MINIMUM_TIMEOUT; - break; - } - - rc = write_sync_reg(SCR_HOST_TO_READER_START, dev); - if (rc <= 0) { - DEBUGP(5, dev, "write_sync_reg c=%.2zx\n", rc); - DEBUGP(2, dev, "<- cm4040_write (failed)\n"); - if (rc == -ERESTARTSYS) - return rc; - else - return -EIO; - } - - DEBUGP(4, dev, "start \n"); - - for (i = 0; i < bytes_to_write; i++) { - rc = wait_for_bulk_out_ready(dev); - if (rc <= 0) { - DEBUGP(5, dev, "wait_for_bulk_out_ready rc=%.2zx\n", - rc); - DEBUGP(2, dev, "<- cm4040_write (failed)\n"); - if (rc == -ERESTARTSYS) - return rc; - else - return -EIO; - } - - xoutb(dev->s_buf[i],iobase + REG_OFFSET_BULK_OUT); - } - DEBUGP(4, dev, "end\n"); - - rc = write_sync_reg(SCR_HOST_TO_READER_DONE, dev); - - if (rc <= 0) { - DEBUGP(5, dev, "write_sync_reg c=%.2zx\n", rc); - DEBUGP(2, dev, "<- cm4040_write (failed)\n"); - if (rc == -ERESTARTSYS) - return rc; - else - return -EIO; - } - - DEBUGP(2, dev, "<- cm4040_write (successfully)\n"); - return count; -} - -static __poll_t cm4040_poll(struct file *filp, poll_table *wait) -{ - struct reader_dev *dev = filp->private_data; - __poll_t mask = 0; - - poll_wait(filp, &dev->poll_wait, wait); - - if (test_and_clear_bit(BS_READABLE, &dev->buffer_status)) - mask |= EPOLLIN | EPOLLRDNORM; - if (test_and_clear_bit(BS_WRITABLE, &dev->buffer_status)) - mask |= EPOLLOUT | EPOLLWRNORM; - - DEBUGP(2, dev, "<- cm4040_poll(%u)\n", mask); - - return mask; -} - -static int cm4040_open(struct inode *inode, struct file *filp) -{ - struct reader_dev *dev; - struct pcmcia_device *link; - int minor = iminor(inode); - int ret; - - if (minor >= CM_MAX_DEV) - return -ENODEV; - - mutex_lock(&cm4040_mutex); - link = dev_table[minor]; - if (link == NULL || !pcmcia_dev_present(link)) { - ret = -ENODEV; - goto out; - } - - if (link->open) { - ret = -EBUSY; - goto out; - } - - dev = link->priv; - filp->private_data = dev; - - if (filp->f_flags & O_NONBLOCK) { - DEBUGP(4, dev, "filep->f_flags O_NONBLOCK set\n"); - ret = -EAGAIN; - goto out; - } - - link->open = 1; - - mod_timer(&dev->poll_timer, jiffies + POLL_PERIOD); - - DEBUGP(2, dev, "<- cm4040_open (successfully)\n"); - ret = nonseekable_open(inode, filp); -out: - mutex_unlock(&cm4040_mutex); - return ret; -} - -static int cm4040_close(struct inode *inode, struct file *filp) -{ - struct reader_dev *dev = filp->private_data; - struct pcmcia_device *link; - int minor = iminor(inode); - - DEBUGP(2, dev, "-> cm4040_close(maj/min=%d.%d)\n", imajor(inode), - iminor(inode)); - - if (minor >= CM_MAX_DEV) - return -ENODEV; - - link = dev_table[minor]; - if (link == NULL) - return -ENODEV; - - cm4040_stop_poll(dev); - - link->open = 0; - wake_up(&dev->devq); - - DEBUGP(2, dev, "<- cm4040_close\n"); - return 0; -} - -static void cm4040_reader_release(struct pcmcia_device *link) -{ - struct reader_dev *dev = link->priv; - - DEBUGP(3, dev, "-> cm4040_reader_release\n"); - while (link->open) { - DEBUGP(3, dev, MODULE_NAME ": delaying release " - "until process has terminated\n"); - wait_event(dev->devq, (link->open == 0)); - } - DEBUGP(3, dev, "<- cm4040_reader_release\n"); - return; -} - -static int cm4040_config_check(struct pcmcia_device *p_dev, void *priv_data) -{ - return pcmcia_request_io(p_dev); -} - - -static int reader_config(struct pcmcia_device *link, int devno) -{ - struct reader_dev *dev; - int fail_rc; - - link->config_flags |= CONF_AUTO_SET_IO; - - if (pcmcia_loop_config(link, cm4040_config_check, NULL)) - goto cs_release; - - fail_rc = pcmcia_enable_device(link); - if (fail_rc != 0) { - dev_info(&link->dev, "pcmcia_enable_device failed 0x%x\n", - fail_rc); - goto cs_release; - } - - dev = link->priv; - - DEBUGP(2, dev, "device " DEVICE_NAME "%d at %pR\n", devno, - link->resource[0]); - DEBUGP(2, dev, "<- reader_config (succ)\n"); - - return 0; - -cs_release: - reader_release(link); - return -ENODEV; -} - -static void reader_release(struct pcmcia_device *link) -{ - cm4040_reader_release(link); - pcmcia_disable_device(link); -} - -static int reader_probe(struct pcmcia_device *link) -{ - struct reader_dev *dev; - int i, ret; - - for (i = 0; i < CM_MAX_DEV; i++) { - if (dev_table[i] == NULL) - break; - } - - if (i == CM_MAX_DEV) - return -ENODEV; - - dev = kzalloc(sizeof(struct reader_dev), GFP_KERNEL); - if (dev == NULL) - return -ENOMEM; - - dev->timeout = CCID_DRIVER_MINIMUM_TIMEOUT; - dev->buffer_status = 0; - - link->priv = dev; - dev->p_dev = link; - - dev_table[i] = link; - - init_waitqueue_head(&dev->devq); - init_waitqueue_head(&dev->poll_wait); - init_waitqueue_head(&dev->read_wait); - init_waitqueue_head(&dev->write_wait); - timer_setup(&dev->poll_timer, cm4040_do_poll, 0); - - ret = reader_config(link, i); - if (ret) { - dev_table[i] = NULL; - kfree(dev); - return ret; - } - - device_create(cmx_class, NULL, MKDEV(major, i), NULL, "cmx%d", i); - - return 0; -} - -static void reader_detach(struct pcmcia_device *link) -{ - struct reader_dev *dev = link->priv; - int devno; - - /* find device */ - for (devno = 0; devno < CM_MAX_DEV; devno++) { - if (dev_table[devno] == link) - break; - } - if (devno == CM_MAX_DEV) - return; - - reader_release(link); - - dev_table[devno] = NULL; - kfree(dev); - - device_destroy(cmx_class, MKDEV(major, devno)); - - return; -} - -static const struct file_operations reader_fops = { - .owner = THIS_MODULE, - .read = cm4040_read, - .write = cm4040_write, - .open = cm4040_open, - .release = cm4040_close, - .poll = cm4040_poll, - .llseek = no_llseek, -}; - -static const struct pcmcia_device_id cm4040_ids[] = { - PCMCIA_DEVICE_MANF_CARD(0x0223, 0x0200), - PCMCIA_DEVICE_PROD_ID12("OMNIKEY", "CardMan 4040", - 0xE32CDD8C, 0x8F23318B), - PCMCIA_DEVICE_NULL, -}; -MODULE_DEVICE_TABLE(pcmcia, cm4040_ids); - -static struct pcmcia_driver reader_driver = { - .owner = THIS_MODULE, - .name = "cm4040_cs", - .probe = reader_probe, - .remove = reader_detach, - .id_table = cm4040_ids, -}; - -static int __init cm4040_init(void) -{ - int rc; - - cmx_class = class_create("cardman_4040"); - if (IS_ERR(cmx_class)) - return PTR_ERR(cmx_class); - - major = register_chrdev(0, DEVICE_NAME, &reader_fops); - if (major < 0) { - printk(KERN_WARNING MODULE_NAME - ": could not get major number\n"); - class_destroy(cmx_class); - return major; - } - - rc = pcmcia_register_driver(&reader_driver); - if (rc < 0) { - unregister_chrdev(major, DEVICE_NAME); - class_destroy(cmx_class); - return rc; - } - - return 0; -} - -static void __exit cm4040_exit(void) -{ - pcmcia_unregister_driver(&reader_driver); - unregister_chrdev(major, DEVICE_NAME); - class_destroy(cmx_class); -} - -module_init(cm4040_init); -module_exit(cm4040_exit); -MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/char/pcmcia/cm4040_cs.h b/drivers/char/pcmcia/cm4040_cs.h deleted file mode 100644 index e2ffff995d51..000000000000 --- a/drivers/char/pcmcia/cm4040_cs.h +++ /dev/null @@ -1,48 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _CM4040_H_ -#define _CM4040_H_ - -#define CM_MAX_DEV 4 - -#define DEVICE_NAME "cmx" -#define MODULE_NAME "cm4040_cs" - -#define REG_OFFSET_BULK_OUT 0 -#define REG_OFFSET_BULK_IN 0 -#define REG_OFFSET_BUFFER_STATUS 1 -#define REG_OFFSET_SYNC_CONTROL 2 - -#define BSR_BULK_IN_FULL 0x02 -#define BSR_BULK_OUT_FULL 0x01 - -#define SCR_HOST_TO_READER_START 0x80 -#define SCR_ABORT 0x40 -#define SCR_EN_NOTIFY 0x20 -#define SCR_ACK_NOTIFY 0x10 -#define SCR_READER_TO_HOST_DONE 0x08 -#define SCR_HOST_TO_READER_DONE 0x04 -#define SCR_PULSE_INTERRUPT 0x02 -#define SCR_POWER_DOWN 0x01 - - -#define CMD_PC_TO_RDR_ICCPOWERON 0x62 -#define CMD_PC_TO_RDR_GETSLOTSTATUS 0x65 -#define CMD_PC_TO_RDR_ICCPOWEROFF 0x63 -#define CMD_PC_TO_RDR_SECURE 0x69 -#define CMD_PC_TO_RDR_GETPARAMETERS 0x6C -#define CMD_PC_TO_RDR_RESETPARAMETERS 0x6D -#define CMD_PC_TO_RDR_SETPARAMETERS 0x61 -#define CMD_PC_TO_RDR_XFRBLOCK 0x6F -#define CMD_PC_TO_RDR_ESCAPE 0x6B -#define CMD_PC_TO_RDR_ICCCLOCK 0x6E -#define CMD_PC_TO_RDR_TEST_SECURE 0x74 -#define CMD_PC_TO_RDR_OK_SECURE 0x89 - - -#define CMD_RDR_TO_PC_SLOTSTATUS 0x81 -#define CMD_RDR_TO_PC_DATABLOCK 0x80 -#define CMD_RDR_TO_PC_PARAMETERS 0x82 -#define CMD_RDR_TO_PC_ESCAPE 0x83 -#define CMD_RDR_TO_PC_OK_SECURE 0x89 - -#endif /* _CM4040_H_ */ diff --git a/drivers/char/pcmcia/scr24x_cs.c b/drivers/char/pcmcia/scr24x_cs.c deleted file mode 100644 index 870781f5a08c..000000000000 --- a/drivers/char/pcmcia/scr24x_cs.c +++ /dev/null @@ -1,359 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * SCR24x PCMCIA Smart Card Reader Driver - * - * Copyright (C) 2005-2006 TL Sudheendran - * Copyright (C) 2016 Lubomir Rintel - * - * Derived from "scr24x_v4.2.6_Release.tar.gz" driver by TL Sudheendran. - */ - -#include <linux/device.h> -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/cdev.h> -#include <linux/slab.h> -#include <linux/fs.h> -#include <linux/io.h> -#include <linux/uaccess.h> - -#include <pcmcia/cistpl.h> -#include <pcmcia/ds.h> - -#define CCID_HEADER_SIZE 10 -#define CCID_LENGTH_OFFSET 1 -#define CCID_MAX_LEN 271 - -#define SCR24X_DATA(n) (1 + n) -#define SCR24X_CMD_STATUS 7 -#define CMD_START 0x40 -#define CMD_WRITE_BYTE 0x41 -#define CMD_READ_BYTE 0x42 -#define STATUS_BUSY 0x80 - -struct scr24x_dev { - struct device *dev; - struct cdev c_dev; - unsigned char buf[CCID_MAX_LEN]; - int devno; - struct mutex lock; - struct kref refcnt; - u8 __iomem *regs; -}; - -#define SCR24X_DEVS 8 -static DECLARE_BITMAP(scr24x_minors, SCR24X_DEVS); - -static struct class *scr24x_class; -static dev_t scr24x_devt; - -static void scr24x_delete(struct kref *kref) -{ - struct scr24x_dev *dev = container_of(kref, struct scr24x_dev, - refcnt); - - kfree(dev); -} - -static int scr24x_wait_ready(struct scr24x_dev *dev) -{ - u_char status; - int timeout = 100; - - do { - status = ioread8(dev->regs + SCR24X_CMD_STATUS); - if (!(status & STATUS_BUSY)) - return 0; - - msleep(20); - } while (--timeout); - - return -EIO; -} - -static int scr24x_open(struct inode *inode, struct file *filp) -{ - struct scr24x_dev *dev = container_of(inode->i_cdev, - struct scr24x_dev, c_dev); - - kref_get(&dev->refcnt); - filp->private_data = dev; - - return stream_open(inode, filp); -} - -static int scr24x_release(struct inode *inode, struct file *filp) -{ - struct scr24x_dev *dev = filp->private_data; - - /* We must not take the dev->lock here as scr24x_delete() - * might be called to remove the dev structure altogether. - * We don't need the lock anyway, since after the reference - * acquired in probe() is released in remove() the chrdev - * is already unregistered and noone can possibly acquire - * a reference via open() anymore. */ - kref_put(&dev->refcnt, scr24x_delete); - return 0; -} - -static int read_chunk(struct scr24x_dev *dev, size_t offset, size_t limit) -{ - size_t i, y; - int ret; - - for (i = offset; i < limit; i += 5) { - iowrite8(CMD_READ_BYTE, dev->regs + SCR24X_CMD_STATUS); - ret = scr24x_wait_ready(dev); - if (ret < 0) - return ret; - - for (y = 0; y < 5 && i + y < limit; y++) - dev->buf[i + y] = ioread8(dev->regs + SCR24X_DATA(y)); - } - - return 0; -} - -static ssize_t scr24x_read(struct file *filp, char __user *buf, size_t count, - loff_t *ppos) -{ - struct scr24x_dev *dev = filp->private_data; - int ret; - int len; - - if (count < CCID_HEADER_SIZE) - return -EINVAL; - - if (mutex_lock_interruptible(&dev->lock)) - return -ERESTARTSYS; - - if (!dev->dev) { - ret = -ENODEV; - goto out; - } - - ret = scr24x_wait_ready(dev); - if (ret < 0) - goto out; - len = CCID_HEADER_SIZE; - ret = read_chunk(dev, 0, len); - if (ret < 0) - goto out; - - len += le32_to_cpu(*(__le32 *)(&dev->buf[CCID_LENGTH_OFFSET])); - if (len > sizeof(dev->buf)) { - ret = -EIO; - goto out; - } - ret = read_chunk(dev, CCID_HEADER_SIZE, len); - if (ret < 0) - goto out; - - if (len < count) - count = len; - - if (copy_to_user(buf, dev->buf, count)) { - ret = -EFAULT; - goto out; - } - - ret = count; -out: - mutex_unlock(&dev->lock); - return ret; -} - -static ssize_t scr24x_write(struct file *filp, const char __user *buf, - size_t count, loff_t *ppos) -{ - struct scr24x_dev *dev = filp->private_data; - size_t i, y; - int ret; - - if (mutex_lock_interruptible(&dev->lock)) - return -ERESTARTSYS; - - if (!dev->dev) { - ret = -ENODEV; - goto out; - } - - if (count > sizeof(dev->buf)) { - ret = -EINVAL; - goto out; - } - - if (copy_from_user(dev->buf, buf, count)) { - ret = -EFAULT; - goto out; - } - - ret = scr24x_wait_ready(dev); - if (ret < 0) - goto out; - - iowrite8(CMD_START, dev->regs + SCR24X_CMD_STATUS); - ret = scr24x_wait_ready(dev); - if (ret < 0) - goto out; - - for (i = 0; i < count; i += 5) { - for (y = 0; y < 5 && i + y < count; y++) - iowrite8(dev->buf[i + y], dev->regs + SCR24X_DATA(y)); - - iowrite8(CMD_WRITE_BYTE, dev->regs + SCR24X_CMD_STATUS); - ret = scr24x_wait_ready(dev); - if (ret < 0) - goto out; - } - - ret = count; -out: - mutex_unlock(&dev->lock); - return ret; -} - -static const struct file_operations scr24x_fops = { - .owner = THIS_MODULE, - .read = scr24x_read, - .write = scr24x_write, - .open = scr24x_open, - .release = scr24x_release, - .llseek = no_llseek, -}; - -static int scr24x_config_check(struct pcmcia_device *link, void *priv_data) -{ - if (resource_size(link->resource[PCMCIA_IOPORT_0]) != 0x11) - return -ENODEV; - return pcmcia_request_io(link); -} - -static int scr24x_probe(struct pcmcia_device *link) -{ - struct scr24x_dev *dev; - int ret; - - dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (!dev) - return -ENOMEM; - - dev->devno = find_first_zero_bit(scr24x_minors, SCR24X_DEVS); - if (dev->devno >= SCR24X_DEVS) { - ret = -EBUSY; - goto err; - } - - mutex_init(&dev->lock); - kref_init(&dev->refcnt); - - link->priv = dev; - link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; - - ret = pcmcia_loop_config(link, scr24x_config_check, NULL); - if (ret < 0) - goto err; - - dev->dev = &link->dev; - dev->regs = devm_ioport_map(&link->dev, - link->resource[PCMCIA_IOPORT_0]->start, - resource_size(link->resource[PCMCIA_IOPORT_0])); - if (!dev->regs) { - ret = -EIO; - goto err; - } - - cdev_init(&dev->c_dev, &scr24x_fops); - dev->c_dev.owner = THIS_MODULE; - ret = cdev_add(&dev->c_dev, MKDEV(MAJOR(scr24x_devt), dev->devno), 1); - if (ret < 0) - goto err; - - ret = pcmcia_enable_device(link); - if (ret < 0) { - pcmcia_disable_device(link); - goto err; - } - - device_create(scr24x_class, NULL, MKDEV(MAJOR(scr24x_devt), dev->devno), - NULL, "scr24x%d", dev->devno); - - dev_info(&link->dev, "SCR24x Chip Card Interface\n"); - return 0; - -err: - if (dev->devno < SCR24X_DEVS) - clear_bit(dev->devno, scr24x_minors); - kfree (dev); - return ret; -} - -static void scr24x_remove(struct pcmcia_device *link) -{ - struct scr24x_dev *dev = (struct scr24x_dev *)link->priv; - - device_destroy(scr24x_class, MKDEV(MAJOR(scr24x_devt), dev->devno)); - mutex_lock(&dev->lock); - pcmcia_disable_device(link); - cdev_del(&dev->c_dev); - clear_bit(dev->devno, scr24x_minors); - dev->dev = NULL; - mutex_unlock(&dev->lock); - - kref_put(&dev->refcnt, scr24x_delete); -} - -static const struct pcmcia_device_id scr24x_ids[] = { - PCMCIA_DEVICE_PROD_ID12("HP", "PC Card Smart Card Reader", - 0x53cb94f9, 0xbfdf89a5), - PCMCIA_DEVICE_PROD_ID1("SCR241 PCMCIA", 0x6271efa3), - PCMCIA_DEVICE_PROD_ID1("SCR243 PCMCIA", 0x2054e8de), - PCMCIA_DEVICE_PROD_ID1("SCR24x PCMCIA", 0x54a33665), - PCMCIA_DEVICE_NULL -}; -MODULE_DEVICE_TABLE(pcmcia, scr24x_ids); - -static struct pcmcia_driver scr24x_driver = { - .owner = THIS_MODULE, - .name = "scr24x_cs", - .probe = scr24x_probe, - .remove = scr24x_remove, - .id_table = scr24x_ids, -}; - -static int __init scr24x_init(void) -{ - int ret; - - scr24x_class = class_create("scr24x"); - if (IS_ERR(scr24x_class)) - return PTR_ERR(scr24x_class); - - ret = alloc_chrdev_region(&scr24x_devt, 0, SCR24X_DEVS, "scr24x"); - if (ret < 0) { - class_destroy(scr24x_class); - return ret; - } - - ret = pcmcia_register_driver(&scr24x_driver); - if (ret < 0) { - unregister_chrdev_region(scr24x_devt, SCR24X_DEVS); - class_destroy(scr24x_class); - } - - return ret; -} - -static void __exit scr24x_exit(void) -{ - pcmcia_unregister_driver(&scr24x_driver); - unregister_chrdev_region(scr24x_devt, SCR24X_DEVS); - class_destroy(scr24x_class); -} - -module_init(scr24x_init); -module_exit(scr24x_exit); - -MODULE_AUTHOR("Lubomir Rintel"); -MODULE_DESCRIPTION("SCR24x PCMCIA Smart Card Reader Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c deleted file mode 100644 index 97c5bfb9d58a..000000000000 --- a/drivers/char/pcmcia/synclink_cs.c +++ /dev/null @@ -1,4290 +0,0 @@ -/* - * linux/drivers/char/pcmcia/synclink_cs.c - * - * $Id: synclink_cs.c,v 4.34 2005/09/08 13:20:54 paulkf Exp $ - * - * Device driver for Microgate SyncLink PC Card - * multiprotocol serial adapter. - * - * written by Paul Fulghum for Microgate Corporation - * paulkf@microgate.com - * - * Microgate and SyncLink are trademarks of Microgate Corporation - * - * This code is released under the GNU General Public License (GPL) - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq)) -#if defined(__i386__) -# define BREAKPOINT() asm(" int $3"); -#else -# define BREAKPOINT() { } -#endif - -#define MAX_DEVICE_COUNT 4 - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/timer.h> -#include <linux/time.h> -#include <linux/interrupt.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/fcntl.h> -#include <linux/ptrace.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/seq_file.h> -#include <linux/slab.h> -#include <linux/netdevice.h> -#include <linux/vmalloc.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/ioctl.h> -#include <linux/synclink.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/dma.h> -#include <linux/bitops.h> -#include <asm/types.h> -#include <linux/termios.h> -#include <linux/workqueue.h> -#include <linux/hdlc.h> - -#include <pcmcia/cistpl.h> -#include <pcmcia/cisreg.h> -#include <pcmcia/ds.h> - -#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_CS_MODULE)) -#define SYNCLINK_GENERIC_HDLC 1 -#else -#define SYNCLINK_GENERIC_HDLC 0 -#endif - -#define GET_USER(error,value,addr) error = get_user(value,addr) -#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0 -#define PUT_USER(error,value,addr) error = put_user(value,addr) -#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0 - -#include <linux/uaccess.h> - -static MGSL_PARAMS default_params = { - MGSL_MODE_HDLC, /* unsigned long mode */ - 0, /* unsigned char loopback; */ - HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */ - HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */ - 0, /* unsigned long clock_speed; */ - 0xff, /* unsigned char addr_filter; */ - HDLC_CRC_16_CCITT, /* unsigned short crc_type; */ - HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */ - HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */ - 9600, /* unsigned long data_rate; */ - 8, /* unsigned char data_bits; */ - 1, /* unsigned char stop_bits; */ - ASYNC_PARITY_NONE /* unsigned char parity; */ -}; - -typedef struct { - int count; - unsigned char status; - char data[1]; -} RXBUF; - -/* The queue of BH actions to be performed */ - -#define BH_RECEIVE 1 -#define BH_TRANSMIT 2 -#define BH_STATUS 4 - -#define IO_PIN_SHUTDOWN_LIMIT 100 - -#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) - -struct _input_signal_events { - int ri_up; - int ri_down; - int dsr_up; - int dsr_down; - int dcd_up; - int dcd_down; - int cts_up; - int cts_down; -}; - - -/* - * Device instance data structure - */ - -typedef struct _mgslpc_info { - struct tty_port port; - void *if_ptr; /* General purpose pointer (used by SPPP) */ - int magic; - int line; - - struct mgsl_icount icount; - - int timeout; - int x_char; /* xon/xoff character */ - unsigned char read_status_mask; - unsigned char ignore_status_mask; - - unsigned char *tx_buf; - int tx_put; - int tx_get; - int tx_count; - - /* circular list of fixed length rx buffers */ - - unsigned char *rx_buf; /* memory allocated for all rx buffers */ - int rx_buf_total_size; /* size of memory allocated for rx buffers */ - int rx_put; /* index of next empty rx buffer */ - int rx_get; /* index of next full rx buffer */ - int rx_buf_size; /* size in bytes of single rx buffer */ - int rx_buf_count; /* total number of rx buffers */ - int rx_frame_count; /* number of full rx buffers */ - - wait_queue_head_t status_event_wait_q; - wait_queue_head_t event_wait_q; - struct timer_list tx_timer; /* HDLC transmit timeout timer */ - struct _mgslpc_info *next_device; /* device list link */ - - unsigned short imra_value; - unsigned short imrb_value; - unsigned char pim_value; - - spinlock_t lock; - struct work_struct task; /* task structure for scheduling bh */ - - u32 max_frame_size; - - u32 pending_bh; - - bool bh_running; - bool bh_requested; - - int dcd_chkcount; /* check counts to prevent */ - int cts_chkcount; /* too many IRQs if a signal */ - int dsr_chkcount; /* is floating */ - int ri_chkcount; - - bool rx_enabled; - bool rx_overflow; - - bool tx_enabled; - bool tx_active; - bool tx_aborting; - u32 idle_mode; - - int if_mode; /* serial interface selection (RS-232, v.35 etc) */ - - char device_name[25]; /* device instance name */ - - unsigned int io_base; /* base I/O address of adapter */ - unsigned int irq_level; - - MGSL_PARAMS params; /* communications parameters */ - - unsigned char serial_signals; /* current serial signal states */ - - bool irq_occurred; /* for diagnostics use */ - char testing_irq; - unsigned int init_error; /* startup error (DIAGS) */ - - char *flag_buf; - bool drop_rts_on_tx_done; - - struct _input_signal_events input_signal_events; - - /* PCMCIA support */ - struct pcmcia_device *p_dev; - int stop; - - /* SPPP/Cisco HDLC device parts */ - int netcount; - spinlock_t netlock; - -#if SYNCLINK_GENERIC_HDLC - struct net_device *netdev; -#endif - -} MGSLPC_INFO; - -#define MGSLPC_MAGIC 0x5402 - -/* - * The size of the serial xmit buffer is 1 page, or 4096 bytes - */ -#define TXBUFSIZE 4096 - - -#define CHA 0x00 /* channel A offset */ -#define CHB 0x40 /* channel B offset */ - -/* - * FIXME: PPC has PVR defined in asm/reg.h. For now we just undef it. - */ -#undef PVR - -#define RXFIFO 0 -#define TXFIFO 0 -#define STAR 0x20 -#define CMDR 0x20 -#define RSTA 0x21 -#define PRE 0x21 -#define MODE 0x22 -#define TIMR 0x23 -#define XAD1 0x24 -#define XAD2 0x25 -#define RAH1 0x26 -#define RAH2 0x27 -#define DAFO 0x27 -#define RAL1 0x28 -#define RFC 0x28 -#define RHCR 0x29 -#define RAL2 0x29 -#define RBCL 0x2a -#define XBCL 0x2a -#define RBCH 0x2b -#define XBCH 0x2b -#define CCR0 0x2c -#define CCR1 0x2d -#define CCR2 0x2e -#define CCR3 0x2f -#define VSTR 0x34 -#define BGR 0x34 -#define RLCR 0x35 -#define AML 0x36 -#define AMH 0x37 -#define GIS 0x38 -#define IVA 0x38 -#define IPC 0x39 -#define ISR 0x3a -#define IMR 0x3a -#define PVR 0x3c -#define PIS 0x3d -#define PIM 0x3d -#define PCR 0x3e -#define CCR4 0x3f - -// IMR/ISR - -#define IRQ_BREAK_ON BIT15 // rx break detected -#define IRQ_DATAOVERRUN BIT14 // receive data overflow -#define IRQ_ALLSENT BIT13 // all sent -#define IRQ_UNDERRUN BIT12 // transmit data underrun -#define IRQ_TIMER BIT11 // timer interrupt -#define IRQ_CTS BIT10 // CTS status change -#define IRQ_TXREPEAT BIT9 // tx message repeat -#define IRQ_TXFIFO BIT8 // transmit pool ready -#define IRQ_RXEOM BIT7 // receive message end -#define IRQ_EXITHUNT BIT6 // receive frame start -#define IRQ_RXTIME BIT6 // rx char timeout -#define IRQ_DCD BIT2 // carrier detect status change -#define IRQ_OVERRUN BIT1 // receive frame overflow -#define IRQ_RXFIFO BIT0 // receive pool full - -// STAR - -#define XFW BIT6 // transmit FIFO write enable -#define CEC BIT2 // command executing -#define CTS BIT1 // CTS state - -#define PVR_DTR BIT0 -#define PVR_DSR BIT1 -#define PVR_RI BIT2 -#define PVR_AUTOCTS BIT3 -#define PVR_RS232 0x20 /* 0010b */ -#define PVR_V35 0xe0 /* 1110b */ -#define PVR_RS422 0x40 /* 0100b */ - -/* Register access functions */ - -#define write_reg(info, reg, val) outb((val),(info)->io_base + (reg)) -#define read_reg(info, reg) inb((info)->io_base + (reg)) - -#define read_reg16(info, reg) inw((info)->io_base + (reg)) -#define write_reg16(info, reg, val) outw((val), (info)->io_base + (reg)) - -#define set_reg_bits(info, reg, mask) \ - write_reg(info, (reg), \ - (unsigned char) (read_reg(info, (reg)) | (mask))) -#define clear_reg_bits(info, reg, mask) \ - write_reg(info, (reg), \ - (unsigned char) (read_reg(info, (reg)) & ~(mask))) -/* - * interrupt enable/disable routines - */ -static void irq_disable(MGSLPC_INFO *info, unsigned char channel, unsigned short mask) -{ - if (channel == CHA) { - info->imra_value |= mask; - write_reg16(info, CHA + IMR, info->imra_value); - } else { - info->imrb_value |= mask; - write_reg16(info, CHB + IMR, info->imrb_value); - } -} -static void irq_enable(MGSLPC_INFO *info, unsigned char channel, unsigned short mask) -{ - if (channel == CHA) { - info->imra_value &= ~mask; - write_reg16(info, CHA + IMR, info->imra_value); - } else { - info->imrb_value &= ~mask; - write_reg16(info, CHB + IMR, info->imrb_value); - } -} - -#define port_irq_disable(info, mask) \ - { info->pim_value |= (mask); write_reg(info, PIM, info->pim_value); } - -#define port_irq_enable(info, mask) \ - { info->pim_value &= ~(mask); write_reg(info, PIM, info->pim_value); } - -static void rx_start(MGSLPC_INFO *info); -static void rx_stop(MGSLPC_INFO *info); - -static void tx_start(MGSLPC_INFO *info, struct tty_struct *tty); -static void tx_stop(MGSLPC_INFO *info); -static void tx_set_idle(MGSLPC_INFO *info); - -static void get_signals(MGSLPC_INFO *info); -static void set_signals(MGSLPC_INFO *info); - -static void reset_device(MGSLPC_INFO *info); - -static void hdlc_mode(MGSLPC_INFO *info); -static void async_mode(MGSLPC_INFO *info); - -static void tx_timeout(struct timer_list *t); - -static bool carrier_raised(struct tty_port *port); -static void dtr_rts(struct tty_port *port, bool active); - -#if SYNCLINK_GENERIC_HDLC -#define dev_to_port(D) (dev_to_hdlc(D)->priv) -static void hdlcdev_tx_done(MGSLPC_INFO *info); -static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size); -static int hdlcdev_init(MGSLPC_INFO *info); -static void hdlcdev_exit(MGSLPC_INFO *info); -#endif - -static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit); - -static bool register_test(MGSLPC_INFO *info); -static bool irq_test(MGSLPC_INFO *info); -static int adapter_test(MGSLPC_INFO *info); - -static int claim_resources(MGSLPC_INFO *info); -static void release_resources(MGSLPC_INFO *info); -static int mgslpc_add_device(MGSLPC_INFO *info); -static void mgslpc_remove_device(MGSLPC_INFO *info); - -static bool rx_get_frame(MGSLPC_INFO *info, struct tty_struct *tty); -static void rx_reset_buffers(MGSLPC_INFO *info); -static int rx_alloc_buffers(MGSLPC_INFO *info); -static void rx_free_buffers(MGSLPC_INFO *info); - -static irqreturn_t mgslpc_isr(int irq, void *dev_id); - -/* - * Bottom half interrupt handlers - */ -static void bh_handler(struct work_struct *work); -static void bh_transmit(MGSLPC_INFO *info, struct tty_struct *tty); -static void bh_status(MGSLPC_INFO *info); - -/* - * ioctl handlers - */ -static int tiocmget(struct tty_struct *tty); -static int tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear); -static int get_stats(MGSLPC_INFO *info, struct mgsl_icount __user *user_icount); -static int get_params(MGSLPC_INFO *info, MGSL_PARAMS __user *user_params); -static int set_params(MGSLPC_INFO *info, MGSL_PARAMS __user *new_params, struct tty_struct *tty); -static int get_txidle(MGSLPC_INFO *info, int __user *idle_mode); -static int set_txidle(MGSLPC_INFO *info, int idle_mode); -static int set_txenable(MGSLPC_INFO *info, int enable, struct tty_struct *tty); -static int tx_abort(MGSLPC_INFO *info); -static int set_rxenable(MGSLPC_INFO *info, int enable); -static int wait_events(MGSLPC_INFO *info, int __user *mask); - -static MGSLPC_INFO *mgslpc_device_list = NULL; -static int mgslpc_device_count = 0; - -/* - * Set this param to non-zero to load eax with the - * .text section address and breakpoint on module load. - * This is useful for use with gdb and add-symbol-file command. - */ -static bool break_on_load; - -/* - * Driver major number, defaults to zero to get auto - * assigned major number. May be forced as module parameter. - */ -static int ttymajor=0; - -static int debug_level = 0; -static int maxframe[MAX_DEVICE_COUNT] = {0,}; - -module_param(break_on_load, bool, 0); -module_param(ttymajor, int, 0); -module_param(debug_level, int, 0); -module_param_array(maxframe, int, NULL, 0); - -MODULE_LICENSE("GPL"); - -static char *driver_name = "SyncLink PC Card driver"; -static char *driver_version = "$Revision: 4.34 $"; - -static struct tty_driver *serial_driver; - -/* number of characters left in xmit buffer before we ask for more */ -#define WAKEUP_CHARS 256 - -static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty); -static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout); - -/* PCMCIA prototypes */ - -static int mgslpc_config(struct pcmcia_device *link); -static void mgslpc_release(u_long arg); -static void mgslpc_detach(struct pcmcia_device *p_dev); - -/* - * 1st function defined in .text section. Calling this function in - * init_module() followed by a breakpoint allows a remote debugger - * (gdb) to get the .text address for the add-symbol-file command. - * This allows remote debugging of dynamically loadable modules. - */ -static void* mgslpc_get_text_ptr(void) -{ - return mgslpc_get_text_ptr; -} - -/* - * line discipline callback wrappers - * - * The wrappers maintain line discipline references - * while calling into the line discipline. - * - * ldisc_receive_buf - pass receive data to line discipline - */ - -static void ldisc_receive_buf(struct tty_struct *tty, - const __u8 *data, char *flags, int count) -{ - struct tty_ldisc *ld; - if (!tty) - return; - ld = tty_ldisc_ref(tty); - if (ld) { - if (ld->ops->receive_buf) - ld->ops->receive_buf(tty, data, flags, count); - tty_ldisc_deref(ld); - } -} - -static const struct tty_port_operations mgslpc_port_ops = { - .carrier_raised = carrier_raised, - .dtr_rts = dtr_rts -}; - -static int mgslpc_probe(struct pcmcia_device *link) -{ - MGSLPC_INFO *info; - int ret; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("mgslpc_attach\n"); - - info = kzalloc(sizeof(MGSLPC_INFO), GFP_KERNEL); - if (!info) { - printk("Error can't allocate device instance data\n"); - return -ENOMEM; - } - - info->magic = MGSLPC_MAGIC; - tty_port_init(&info->port); - info->port.ops = &mgslpc_port_ops; - INIT_WORK(&info->task, bh_handler); - info->max_frame_size = 4096; - init_waitqueue_head(&info->status_event_wait_q); - init_waitqueue_head(&info->event_wait_q); - spin_lock_init(&info->lock); - spin_lock_init(&info->netlock); - memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); - info->idle_mode = HDLC_TXIDLE_FLAGS; - info->imra_value = 0xffff; - info->imrb_value = 0xffff; - info->pim_value = 0xff; - - info->p_dev = link; - link->priv = info; - - /* Initialize the struct pcmcia_device structure */ - - ret = mgslpc_config(link); - if (ret != 0) - goto failed; - - ret = mgslpc_add_device(info); - if (ret != 0) - goto failed_release; - - return 0; - -failed_release: - mgslpc_release((u_long)link); -failed: - tty_port_destroy(&info->port); - kfree(info); - return ret; -} - -/* Card has been inserted. - */ - -static int mgslpc_ioprobe(struct pcmcia_device *p_dev, void *priv_data) -{ - return pcmcia_request_io(p_dev); -} - -static int mgslpc_config(struct pcmcia_device *link) -{ - MGSLPC_INFO *info = link->priv; - int ret; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("mgslpc_config(0x%p)\n", link); - - link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; - - ret = pcmcia_loop_config(link, mgslpc_ioprobe, NULL); - if (ret != 0) - goto failed; - - link->config_index = 8; - link->config_regs = PRESENT_OPTION; - - ret = pcmcia_request_irq(link, mgslpc_isr); - if (ret) - goto failed; - ret = pcmcia_enable_device(link); - if (ret) - goto failed; - - info->io_base = link->resource[0]->start; - info->irq_level = link->irq; - return 0; - -failed: - mgslpc_release((u_long)link); - return -ENODEV; -} - -/* Card has been removed. - * Unregister device and release PCMCIA configuration. - * If device is open, postpone until it is closed. - */ -static void mgslpc_release(u_long arg) -{ - struct pcmcia_device *link = (struct pcmcia_device *)arg; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("mgslpc_release(0x%p)\n", link); - - pcmcia_disable_device(link); -} - -static void mgslpc_detach(struct pcmcia_device *link) -{ - if (debug_level >= DEBUG_LEVEL_INFO) - printk("mgslpc_detach(0x%p)\n", link); - - ((MGSLPC_INFO *)link->priv)->stop = 1; - mgslpc_release((u_long)link); - - mgslpc_remove_device((MGSLPC_INFO *)link->priv); -} - -static int mgslpc_suspend(struct pcmcia_device *link) -{ - MGSLPC_INFO *info = link->priv; - - info->stop = 1; - - return 0; -} - -static int mgslpc_resume(struct pcmcia_device *link) -{ - MGSLPC_INFO *info = link->priv; - - info->stop = 0; - - return 0; -} - - -static inline bool mgslpc_paranoia_check(MGSLPC_INFO *info, - char *name, const char *routine) -{ -#ifdef MGSLPC_PARANOIA_CHECK - static const char *badmagic = - "Warning: bad magic number for mgsl struct (%s) in %s\n"; - static const char *badinfo = - "Warning: null mgslpc_info for (%s) in %s\n"; - - if (!info) { - printk(badinfo, name, routine); - return true; - } - if (info->magic != MGSLPC_MAGIC) { - printk(badmagic, name, routine); - return true; - } -#else - if (!info) - return true; -#endif - return false; -} - - -#define CMD_RXFIFO BIT7 // release current rx FIFO -#define CMD_RXRESET BIT6 // receiver reset -#define CMD_RXFIFO_READ BIT5 -#define CMD_START_TIMER BIT4 -#define CMD_TXFIFO BIT3 // release current tx FIFO -#define CMD_TXEOM BIT1 // transmit end message -#define CMD_TXRESET BIT0 // transmit reset - -static bool wait_command_complete(MGSLPC_INFO *info, unsigned char channel) -{ - int i = 0; - /* wait for command completion */ - while (read_reg(info, (unsigned char)(channel+STAR)) & BIT2) { - udelay(1); - if (i++ == 1000) - return false; - } - return true; -} - -static void issue_command(MGSLPC_INFO *info, unsigned char channel, unsigned char cmd) -{ - wait_command_complete(info, channel); - write_reg(info, (unsigned char) (channel + CMDR), cmd); -} - -static void tx_pause(struct tty_struct *tty) -{ - MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; - unsigned long flags; - - if (mgslpc_paranoia_check(info, tty->name, "tx_pause")) - return; - if (debug_level >= DEBUG_LEVEL_INFO) - printk("tx_pause(%s)\n", info->device_name); - - spin_lock_irqsave(&info->lock, flags); - if (info->tx_enabled) - tx_stop(info); - spin_unlock_irqrestore(&info->lock, flags); -} - -static void tx_release(struct tty_struct *tty) -{ - MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; - unsigned long flags; - - if (mgslpc_paranoia_check(info, tty->name, "tx_release")) - return; - if (debug_level >= DEBUG_LEVEL_INFO) - printk("tx_release(%s)\n", info->device_name); - - spin_lock_irqsave(&info->lock, flags); - if (!info->tx_enabled) - tx_start(info, tty); - spin_unlock_irqrestore(&info->lock, flags); -} - -/* Return next bottom half action to perform. - * or 0 if nothing to do. - */ -static int bh_action(MGSLPC_INFO *info) -{ - unsigned long flags; - int rc = 0; - - spin_lock_irqsave(&info->lock, flags); - - if (info->pending_bh & BH_RECEIVE) { - info->pending_bh &= ~BH_RECEIVE; - rc = BH_RECEIVE; - } else if (info->pending_bh & BH_TRANSMIT) { - info->pending_bh &= ~BH_TRANSMIT; - rc = BH_TRANSMIT; - } else if (info->pending_bh & BH_STATUS) { - info->pending_bh &= ~BH_STATUS; - rc = BH_STATUS; - } - - if (!rc) { - /* Mark BH routine as complete */ - info->bh_running = false; - info->bh_requested = false; - } - - spin_unlock_irqrestore(&info->lock, flags); - - return rc; -} - -static void bh_handler(struct work_struct *work) -{ - MGSLPC_INFO *info = container_of(work, MGSLPC_INFO, task); - struct tty_struct *tty; - int action; - - if (debug_level >= DEBUG_LEVEL_BH) - printk("%s(%d):bh_handler(%s) entry\n", - __FILE__,__LINE__,info->device_name); - - info->bh_running = true; - tty = tty_port_tty_get(&info->port); - - while((action = bh_action(info)) != 0) { - - /* Process work item */ - if (debug_level >= DEBUG_LEVEL_BH) - printk("%s(%d):bh_handler() work item action=%d\n", - __FILE__,__LINE__,action); - - switch (action) { - - case BH_RECEIVE: - while(rx_get_frame(info, tty)); - break; - case BH_TRANSMIT: - bh_transmit(info, tty); - break; - case BH_STATUS: - bh_status(info); - break; - default: - /* unknown work item ID */ - printk("Unknown work item ID=%08X!\n", action); - break; - } - } - - tty_kref_put(tty); - if (debug_level >= DEBUG_LEVEL_BH) - printk("%s(%d):bh_handler(%s) exit\n", - __FILE__,__LINE__,info->device_name); -} - -static void bh_transmit(MGSLPC_INFO *info, struct tty_struct *tty) -{ - if (debug_level >= DEBUG_LEVEL_BH) - printk("bh_transmit() entry on %s\n", info->device_name); - - if (tty) - tty_wakeup(tty); -} - -static void bh_status(MGSLPC_INFO *info) -{ - info->ri_chkcount = 0; - info->dsr_chkcount = 0; - info->dcd_chkcount = 0; - info->cts_chkcount = 0; -} - -/* eom: non-zero = end of frame */ -static void rx_ready_hdlc(MGSLPC_INFO *info, int eom) -{ - unsigned char data[2]; - unsigned char fifo_count, read_count, i; - RXBUF *buf = (RXBUF*)(info->rx_buf + (info->rx_put * info->rx_buf_size)); - - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):rx_ready_hdlc(eom=%d)\n", __FILE__, __LINE__, eom); - - if (!info->rx_enabled) - return; - - if (info->rx_frame_count >= info->rx_buf_count) { - /* no more free buffers */ - issue_command(info, CHA, CMD_RXRESET); - info->pending_bh |= BH_RECEIVE; - info->rx_overflow = true; - info->icount.buf_overrun++; - return; - } - - if (eom) { - /* end of frame, get FIFO count from RBCL register */ - fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f); - if (fifo_count == 0) - fifo_count = 32; - } else - fifo_count = 32; - - do { - if (fifo_count == 1) { - read_count = 1; - data[0] = read_reg(info, CHA + RXFIFO); - } else { - read_count = 2; - *((unsigned short *) data) = read_reg16(info, CHA + RXFIFO); - } - fifo_count -= read_count; - if (!fifo_count && eom) - buf->status = data[--read_count]; - - for (i = 0; i < read_count; i++) { - if (buf->count >= info->max_frame_size) { - /* frame too large, reset receiver and reset current buffer */ - issue_command(info, CHA, CMD_RXRESET); - buf->count = 0; - return; - } - *(buf->data + buf->count) = data[i]; - buf->count++; - } - } while (fifo_count); - - if (eom) { - info->pending_bh |= BH_RECEIVE; - info->rx_frame_count++; - info->rx_put++; - if (info->rx_put >= info->rx_buf_count) - info->rx_put = 0; - } - issue_command(info, CHA, CMD_RXFIFO); -} - -static void rx_ready_async(MGSLPC_INFO *info, int tcd) -{ - struct tty_port *port = &info->port; - unsigned char data, status, flag; - int fifo_count; - int work = 0; - struct mgsl_icount *icount = &info->icount; - - if (tcd) { - /* early termination, get FIFO count from RBCL register */ - fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f); - - /* Zero fifo count could mean 0 or 32 bytes available. - * If BIT5 of STAR is set then at least 1 byte is available. - */ - if (!fifo_count && (read_reg(info,CHA+STAR) & BIT5)) - fifo_count = 32; - } else - fifo_count = 32; - - tty_buffer_request_room(port, fifo_count); - /* Flush received async data to receive data buffer. */ - while (fifo_count) { - data = read_reg(info, CHA + RXFIFO); - status = read_reg(info, CHA + RXFIFO); - fifo_count -= 2; - - icount->rx++; - flag = TTY_NORMAL; - - // if no frameing/crc error then save data - // BIT7:parity error - // BIT6:framing error - - if (status & (BIT7 | BIT6)) { - if (status & BIT7) - icount->parity++; - else - icount->frame++; - - /* discard char if tty control flags say so */ - if (status & info->ignore_status_mask) - continue; - - status &= info->read_status_mask; - - if (status & BIT7) - flag = TTY_PARITY; - else if (status & BIT6) - flag = TTY_FRAME; - } - work += tty_insert_flip_char(port, data, flag); - } - issue_command(info, CHA, CMD_RXFIFO); - - if (debug_level >= DEBUG_LEVEL_ISR) { - printk("%s(%d):rx_ready_async", - __FILE__,__LINE__); - printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n", - __FILE__,__LINE__,icount->rx,icount->brk, - icount->parity,icount->frame,icount->overrun); - } - - if (work) - tty_flip_buffer_push(port); -} - - -static void tx_done(MGSLPC_INFO *info, struct tty_struct *tty) -{ - if (!info->tx_active) - return; - - info->tx_active = false; - info->tx_aborting = false; - - if (info->params.mode == MGSL_MODE_ASYNC) - return; - - info->tx_count = info->tx_put = info->tx_get = 0; - del_timer(&info->tx_timer); - - if (info->drop_rts_on_tx_done) { - get_signals(info); - if (info->serial_signals & SerialSignal_RTS) { - info->serial_signals &= ~SerialSignal_RTS; - set_signals(info); - } - info->drop_rts_on_tx_done = false; - } - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_tx_done(info); - else -#endif - { - if (tty && (tty->flow.stopped || tty->hw_stopped)) { - tx_stop(info); - return; - } - info->pending_bh |= BH_TRANSMIT; - } -} - -static void tx_ready(MGSLPC_INFO *info, struct tty_struct *tty) -{ - unsigned char fifo_count = 32; - int c; - - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):tx_ready(%s)\n", __FILE__, __LINE__, info->device_name); - - if (info->params.mode == MGSL_MODE_HDLC) { - if (!info->tx_active) - return; - } else { - if (tty && (tty->flow.stopped || tty->hw_stopped)) { - tx_stop(info); - return; - } - if (!info->tx_count) - info->tx_active = false; - } - - if (!info->tx_count) - return; - - while (info->tx_count && fifo_count) { - c = min(2, min_t(int, fifo_count, min(info->tx_count, TXBUFSIZE - info->tx_get))); - - if (c == 1) { - write_reg(info, CHA + TXFIFO, *(info->tx_buf + info->tx_get)); - } else { - write_reg16(info, CHA + TXFIFO, - *((unsigned short*)(info->tx_buf + info->tx_get))); - } - info->tx_count -= c; - info->tx_get = (info->tx_get + c) & (TXBUFSIZE - 1); - fifo_count -= c; - } - - if (info->params.mode == MGSL_MODE_ASYNC) { - if (info->tx_count < WAKEUP_CHARS) - info->pending_bh |= BH_TRANSMIT; - issue_command(info, CHA, CMD_TXFIFO); - } else { - if (info->tx_count) - issue_command(info, CHA, CMD_TXFIFO); - else - issue_command(info, CHA, CMD_TXFIFO + CMD_TXEOM); - } -} - -static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty) -{ - get_signals(info); - if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) - irq_disable(info, CHB, IRQ_CTS); - info->icount.cts++; - if (info->serial_signals & SerialSignal_CTS) - info->input_signal_events.cts_up++; - else - info->input_signal_events.cts_down++; - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - - if (tty && tty_port_cts_enabled(&info->port)) { - if (tty->hw_stopped) { - if (info->serial_signals & SerialSignal_CTS) { - if (debug_level >= DEBUG_LEVEL_ISR) - printk("CTS tx start..."); - tty->hw_stopped = false; - tx_start(info, tty); - info->pending_bh |= BH_TRANSMIT; - return; - } - } else { - if (!(info->serial_signals & SerialSignal_CTS)) { - if (debug_level >= DEBUG_LEVEL_ISR) - printk("CTS tx stop..."); - tty->hw_stopped = true; - tx_stop(info); - } - } - } - info->pending_bh |= BH_STATUS; -} - -static void dcd_change(MGSLPC_INFO *info, struct tty_struct *tty) -{ - get_signals(info); - if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) - irq_disable(info, CHB, IRQ_DCD); - info->icount.dcd++; - if (info->serial_signals & SerialSignal_DCD) { - info->input_signal_events.dcd_up++; - } - else - info->input_signal_events.dcd_down++; -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) { - if (info->serial_signals & SerialSignal_DCD) - netif_carrier_on(info->netdev); - else - netif_carrier_off(info->netdev); - } -#endif - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - - if (tty_port_check_carrier(&info->port)) { - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s CD now %s...", info->device_name, - (info->serial_signals & SerialSignal_DCD) ? "on" : "off"); - if (info->serial_signals & SerialSignal_DCD) - wake_up_interruptible(&info->port.open_wait); - else { - if (debug_level >= DEBUG_LEVEL_ISR) - printk("doing serial hangup..."); - if (tty) - tty_hangup(tty); - } - } - info->pending_bh |= BH_STATUS; -} - -static void dsr_change(MGSLPC_INFO *info) -{ - get_signals(info); - if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) - port_irq_disable(info, PVR_DSR); - info->icount.dsr++; - if (info->serial_signals & SerialSignal_DSR) - info->input_signal_events.dsr_up++; - else - info->input_signal_events.dsr_down++; - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - info->pending_bh |= BH_STATUS; -} - -static void ri_change(MGSLPC_INFO *info) -{ - get_signals(info); - if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) - port_irq_disable(info, PVR_RI); - info->icount.rng++; - if (info->serial_signals & SerialSignal_RI) - info->input_signal_events.ri_up++; - else - info->input_signal_events.ri_down++; - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - info->pending_bh |= BH_STATUS; -} - -/* Interrupt service routine entry point. - * - * Arguments: - * - * irq interrupt number that caused interrupt - * dev_id device ID supplied during interrupt registration - */ -static irqreturn_t mgslpc_isr(int dummy, void *dev_id) -{ - MGSLPC_INFO *info = dev_id; - struct tty_struct *tty; - unsigned short isr; - unsigned char gis, pis; - int count=0; - - if (debug_level >= DEBUG_LEVEL_ISR) - printk("mgslpc_isr(%d) entry.\n", info->irq_level); - - if (!(info->p_dev->_locked)) - return IRQ_HANDLED; - - tty = tty_port_tty_get(&info->port); - - spin_lock(&info->lock); - - while ((gis = read_reg(info, CHA + GIS))) { - if (debug_level >= DEBUG_LEVEL_ISR) - printk("mgslpc_isr %s gis=%04X\n", info->device_name,gis); - - if ((gis & 0x70) || count > 1000) { - printk("synclink_cs:hardware failed or ejected\n"); - break; - } - count++; - - if (gis & (BIT1 | BIT0)) { - isr = read_reg16(info, CHB + ISR); - if (isr & IRQ_DCD) - dcd_change(info, tty); - if (isr & IRQ_CTS) - cts_change(info, tty); - } - if (gis & (BIT3 | BIT2)) - { - isr = read_reg16(info, CHA + ISR); - if (isr & IRQ_TIMER) { - info->irq_occurred = true; - irq_disable(info, CHA, IRQ_TIMER); - } - - /* receive IRQs */ - if (isr & IRQ_EXITHUNT) { - info->icount.exithunt++; - wake_up_interruptible(&info->event_wait_q); - } - if (isr & IRQ_BREAK_ON) { - info->icount.brk++; - if (info->port.flags & ASYNC_SAK) - do_SAK(tty); - } - if (isr & IRQ_RXTIME) { - issue_command(info, CHA, CMD_RXFIFO_READ); - } - if (isr & (IRQ_RXEOM | IRQ_RXFIFO)) { - if (info->params.mode == MGSL_MODE_HDLC) - rx_ready_hdlc(info, isr & IRQ_RXEOM); - else - rx_ready_async(info, isr & IRQ_RXEOM); - } - - /* transmit IRQs */ - if (isr & IRQ_UNDERRUN) { - if (info->tx_aborting) - info->icount.txabort++; - else - info->icount.txunder++; - tx_done(info, tty); - } - else if (isr & IRQ_ALLSENT) { - info->icount.txok++; - tx_done(info, tty); - } - else if (isr & IRQ_TXFIFO) - tx_ready(info, tty); - } - if (gis & BIT7) { - pis = read_reg(info, CHA + PIS); - if (pis & BIT1) - dsr_change(info); - if (pis & BIT2) - ri_change(info); - } - } - - /* Request bottom half processing if there's something - * for it to do and the bh is not already running - */ - - if (info->pending_bh && !info->bh_running && !info->bh_requested) { - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):%s queueing bh task.\n", - __FILE__,__LINE__,info->device_name); - schedule_work(&info->task); - info->bh_requested = true; - } - - spin_unlock(&info->lock); - tty_kref_put(tty); - - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):mgslpc_isr(%d)exit.\n", - __FILE__, __LINE__, info->irq_level); - - return IRQ_HANDLED; -} - -/* Initialize and start device. - */ -static int startup(MGSLPC_INFO * info, struct tty_struct *tty) -{ - int retval = 0; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):startup(%s)\n", __FILE__, __LINE__, info->device_name); - - if (tty_port_initialized(&info->port)) - return 0; - - if (!info->tx_buf) { - /* allocate a page of memory for a transmit buffer */ - info->tx_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL); - if (!info->tx_buf) { - printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n", - __FILE__, __LINE__, info->device_name); - return -ENOMEM; - } - } - - info->pending_bh = 0; - - memset(&info->icount, 0, sizeof(info->icount)); - - timer_setup(&info->tx_timer, tx_timeout, 0); - - /* Allocate and claim adapter resources */ - retval = claim_resources(info); - - /* perform existence check and diagnostics */ - if (!retval) - retval = adapter_test(info); - - if (retval) { - if (capable(CAP_SYS_ADMIN) && tty) - set_bit(TTY_IO_ERROR, &tty->flags); - release_resources(info); - return retval; - } - - /* program hardware for current parameters */ - mgslpc_change_params(info, tty); - - if (tty) - clear_bit(TTY_IO_ERROR, &tty->flags); - - tty_port_set_initialized(&info->port, true); - - return 0; -} - -/* Called by mgslpc_close() and mgslpc_hangup() to shutdown hardware - */ -static void shutdown(MGSLPC_INFO * info, struct tty_struct *tty) -{ - unsigned long flags; - - if (!tty_port_initialized(&info->port)) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_shutdown(%s)\n", - __FILE__, __LINE__, info->device_name); - - /* clear status wait queue because status changes */ - /* can't happen after shutting down the hardware */ - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - - del_timer_sync(&info->tx_timer); - - if (info->tx_buf) { - free_page((unsigned long) info->tx_buf); - info->tx_buf = NULL; - } - - spin_lock_irqsave(&info->lock, flags); - - rx_stop(info); - tx_stop(info); - - /* TODO:disable interrupts instead of reset to preserve signal states */ - reset_device(info); - - if (!tty || C_HUPCL(tty)) { - info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - set_signals(info); - } - - spin_unlock_irqrestore(&info->lock, flags); - - release_resources(info); - - if (tty) - set_bit(TTY_IO_ERROR, &tty->flags); - - tty_port_set_initialized(&info->port, false); -} - -static void mgslpc_program_hw(MGSLPC_INFO *info, struct tty_struct *tty) -{ - unsigned long flags; - - spin_lock_irqsave(&info->lock, flags); - - rx_stop(info); - tx_stop(info); - info->tx_count = info->tx_put = info->tx_get = 0; - - if (info->params.mode == MGSL_MODE_HDLC || info->netcount) - hdlc_mode(info); - else - async_mode(info); - - set_signals(info); - - info->dcd_chkcount = 0; - info->cts_chkcount = 0; - info->ri_chkcount = 0; - info->dsr_chkcount = 0; - - irq_enable(info, CHB, IRQ_DCD | IRQ_CTS); - port_irq_enable(info, (unsigned char) PVR_DSR | PVR_RI); - get_signals(info); - - if (info->netcount || (tty && C_CREAD(tty))) - rx_start(info); - - spin_unlock_irqrestore(&info->lock, flags); -} - -/* Reconfigure adapter based on new parameters - */ -static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty) -{ - unsigned cflag; - int bits_per_char; - - if (!tty) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_change_params(%s)\n", - __FILE__, __LINE__, info->device_name); - - cflag = tty->termios.c_cflag; - - /* if B0 rate (hangup) specified then negate RTS and DTR */ - /* otherwise assert RTS and DTR */ - if (cflag & CBAUD) - info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR; - else - info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - - /* byte size and parity */ - if ((cflag & CSIZE) != CS8) { - cflag &= ~CSIZE; - cflag |= CS7; - tty->termios.c_cflag = cflag; - } - info->params.data_bits = tty_get_char_size(cflag); - - if (cflag & CSTOPB) - info->params.stop_bits = 2; - else - info->params.stop_bits = 1; - - info->params.parity = ASYNC_PARITY_NONE; - if (cflag & PARENB) { - if (cflag & PARODD) - info->params.parity = ASYNC_PARITY_ODD; - else - info->params.parity = ASYNC_PARITY_EVEN; - if (cflag & CMSPAR) - info->params.parity = ASYNC_PARITY_SPACE; - } - - /* calculate number of jiffies to transmit a full - * FIFO (32 bytes) at specified data rate - */ - bits_per_char = info->params.data_bits + - info->params.stop_bits + 1; - - /* if port data rate is set to 460800 or less then - * allow tty settings to override, otherwise keep the - * current data rate. - */ - if (info->params.data_rate <= 460800) { - info->params.data_rate = tty_get_baud_rate(tty); - } - - if (info->params.data_rate) { - info->timeout = (32*HZ*bits_per_char) / - info->params.data_rate; - } - info->timeout += HZ/50; /* Add .02 seconds of slop */ - - tty_port_set_cts_flow(&info->port, cflag & CRTSCTS); - tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL); - - /* process tty input control flags */ - - info->read_status_mask = 0; - if (I_INPCK(tty)) - info->read_status_mask |= BIT7 | BIT6; - if (I_IGNPAR(tty)) - info->ignore_status_mask |= BIT7 | BIT6; - - mgslpc_program_hw(info, tty); -} - -/* Add a character to the transmit buffer - */ -static int mgslpc_put_char(struct tty_struct *tty, unsigned char ch) -{ - MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) { - printk("%s(%d):mgslpc_put_char(%d) on %s\n", - __FILE__, __LINE__, ch, info->device_name); - } - - if (mgslpc_paranoia_check(info, tty->name, "mgslpc_put_char")) - return 0; - - if (!info->tx_buf) - return 0; - - spin_lock_irqsave(&info->lock, flags); - - if (info->params.mode == MGSL_MODE_ASYNC || !info->tx_active) { - if (info->tx_count < TXBUFSIZE - 1) { - info->tx_buf[info->tx_put++] = ch; - info->tx_put &= TXBUFSIZE-1; - info->tx_count++; - } - } - - spin_unlock_irqrestore(&info->lock, flags); - return 1; -} - -/* Enable transmitter so remaining characters in the - * transmit buffer are sent. - */ -static void mgslpc_flush_chars(struct tty_struct *tty) -{ - MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_flush_chars() entry on %s tx_count=%d\n", - __FILE__, __LINE__, info->device_name, info->tx_count); - - if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_chars")) - return; - - if (info->tx_count <= 0 || tty->flow.stopped || - tty->hw_stopped || !info->tx_buf) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_flush_chars() entry on %s starting transmitter\n", - __FILE__, __LINE__, info->device_name); - - spin_lock_irqsave(&info->lock, flags); - if (!info->tx_active) - tx_start(info, tty); - spin_unlock_irqrestore(&info->lock, flags); -} - -/* Send a block of data - * - * Arguments: - * - * tty pointer to tty information structure - * buf pointer to buffer containing send data - * count size of send data in bytes - * - * Returns: number of characters written - */ -static int mgslpc_write(struct tty_struct * tty, - const unsigned char *buf, int count) -{ - int c, ret = 0; - MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_write(%s) count=%d\n", - __FILE__, __LINE__, info->device_name, count); - - if (mgslpc_paranoia_check(info, tty->name, "mgslpc_write") || - !info->tx_buf) - goto cleanup; - - if (info->params.mode == MGSL_MODE_HDLC) { - if (count > TXBUFSIZE) { - ret = -EIO; - goto cleanup; - } - if (info->tx_active) - goto cleanup; - else if (info->tx_count) - goto start; - } - - for (;;) { - c = min(count, - min(TXBUFSIZE - info->tx_count - 1, - TXBUFSIZE - info->tx_put)); - if (c <= 0) - break; - - memcpy(info->tx_buf + info->tx_put, buf, c); - - spin_lock_irqsave(&info->lock, flags); - info->tx_put = (info->tx_put + c) & (TXBUFSIZE-1); - info->tx_count += c; - spin_unlock_irqrestore(&info->lock, flags); - - buf += c; - count -= c; - ret += c; - } -start: - if (info->tx_count && !tty->flow.stopped && !tty->hw_stopped) { - spin_lock_irqsave(&info->lock, flags); - if (!info->tx_active) - tx_start(info, tty); - spin_unlock_irqrestore(&info->lock, flags); - } -cleanup: - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_write(%s) returning=%d\n", - __FILE__, __LINE__, info->device_name, ret); - return ret; -} - -/* Return the count of free bytes in transmit buffer - */ -static unsigned int mgslpc_write_room(struct tty_struct *tty) -{ - MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; - int ret; - - if (mgslpc_paranoia_check(info, tty->name, "mgslpc_write_room")) - return 0; - - if (info->params.mode == MGSL_MODE_HDLC) { - /* HDLC (frame oriented) mode */ - if (info->tx_active) - return 0; - else - return HDLC_MAX_FRAME_SIZE; - } else { - ret = TXBUFSIZE - info->tx_count - 1; - if (ret < 0) - ret = 0; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_write_room(%s)=%d\n", - __FILE__, __LINE__, info->device_name, ret); - return ret; -} - -/* Return the count of bytes in transmit buffer - */ -static unsigned int mgslpc_chars_in_buffer(struct tty_struct *tty) -{ - MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; - unsigned int rc; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_chars_in_buffer(%s)\n", - __FILE__, __LINE__, info->device_name); - - if (mgslpc_paranoia_check(info, tty->name, "mgslpc_chars_in_buffer")) - return 0; - - if (info->params.mode == MGSL_MODE_HDLC) - rc = info->tx_active ? info->max_frame_size : 0; - else - rc = info->tx_count; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_chars_in_buffer(%s)=%u\n", - __FILE__, __LINE__, info->device_name, rc); - - return rc; -} - -/* Discard all data in the send buffer - */ -static void mgslpc_flush_buffer(struct tty_struct *tty) -{ - MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_flush_buffer(%s) entry\n", - __FILE__, __LINE__, info->device_name); - - if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_buffer")) - return; - - spin_lock_irqsave(&info->lock, flags); - info->tx_count = info->tx_put = info->tx_get = 0; - del_timer(&info->tx_timer); - spin_unlock_irqrestore(&info->lock, flags); - - wake_up_interruptible(&tty->write_wait); - tty_wakeup(tty); -} - -/* Send a high-priority XON/XOFF character - */ -static void mgslpc_send_xchar(struct tty_struct *tty, char ch) -{ - MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_send_xchar(%s,%d)\n", - __FILE__, __LINE__, info->device_name, ch); - - if (mgslpc_paranoia_check(info, tty->name, "mgslpc_send_xchar")) - return; - - info->x_char = ch; - if (ch) { - spin_lock_irqsave(&info->lock, flags); - if (!info->tx_enabled) - tx_start(info, tty); - spin_unlock_irqrestore(&info->lock, flags); - } -} - -/* Signal remote device to throttle send data (our receive data) - */ -static void mgslpc_throttle(struct tty_struct * tty) -{ - MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_throttle(%s) entry\n", - __FILE__, __LINE__, info->device_name); - - if (mgslpc_paranoia_check(info, tty->name, "mgslpc_throttle")) - return; - - if (I_IXOFF(tty)) - mgslpc_send_xchar(tty, STOP_CHAR(tty)); - - if (C_CRTSCTS(tty)) { - spin_lock_irqsave(&info->lock, flags); - info->serial_signals &= ~SerialSignal_RTS; - set_signals(info); - spin_unlock_irqrestore(&info->lock, flags); - } -} - -/* Signal remote device to stop throttling send data (our receive data) - */ -static void mgslpc_unthrottle(struct tty_struct * tty) -{ - MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_unthrottle(%s) entry\n", - __FILE__, __LINE__, info->device_name); - - if (mgslpc_paranoia_check(info, tty->name, "mgslpc_unthrottle")) - return; - - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - mgslpc_send_xchar(tty, START_CHAR(tty)); - } - - if (C_CRTSCTS(tty)) { - spin_lock_irqsave(&info->lock, flags); - info->serial_signals |= SerialSignal_RTS; - set_signals(info); - spin_unlock_irqrestore(&info->lock, flags); - } -} - -/* get the current serial statistics - */ -static int get_stats(MGSLPC_INFO * info, struct mgsl_icount __user *user_icount) -{ - int err; - if (debug_level >= DEBUG_LEVEL_INFO) - printk("get_params(%s)\n", info->device_name); - if (!user_icount) { - memset(&info->icount, 0, sizeof(info->icount)); - } else { - COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount)); - if (err) - return -EFAULT; - } - return 0; -} - -/* get the current serial parameters - */ -static int get_params(MGSLPC_INFO * info, MGSL_PARAMS __user *user_params) -{ - int err; - if (debug_level >= DEBUG_LEVEL_INFO) - printk("get_params(%s)\n", info->device_name); - COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS)); - if (err) - return -EFAULT; - return 0; -} - -/* set the serial parameters - * - * Arguments: - * - * info pointer to device instance data - * new_params user buffer containing new serial params - * - * Returns: 0 if success, otherwise error code - */ -static int set_params(MGSLPC_INFO * info, MGSL_PARAMS __user *new_params, struct tty_struct *tty) -{ - unsigned long flags; - MGSL_PARAMS tmp_params; - int err; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):set_params %s\n", __FILE__,__LINE__, - info->device_name); - COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS)); - if (err) { - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):set_params(%s) user buffer copy failed\n", - __FILE__, __LINE__, info->device_name); - return -EFAULT; - } - - spin_lock_irqsave(&info->lock, flags); - memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); - spin_unlock_irqrestore(&info->lock, flags); - - mgslpc_change_params(info, tty); - - return 0; -} - -static int get_txidle(MGSLPC_INFO * info, int __user *idle_mode) -{ - int err; - if (debug_level >= DEBUG_LEVEL_INFO) - printk("get_txidle(%s)=%d\n", info->device_name, info->idle_mode); - COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int)); - if (err) - return -EFAULT; - return 0; -} - -static int set_txidle(MGSLPC_INFO * info, int idle_mode) -{ - unsigned long flags; - if (debug_level >= DEBUG_LEVEL_INFO) - printk("set_txidle(%s,%d)\n", info->device_name, idle_mode); - spin_lock_irqsave(&info->lock, flags); - info->idle_mode = idle_mode; - tx_set_idle(info); - spin_unlock_irqrestore(&info->lock, flags); - return 0; -} - -static int get_interface(MGSLPC_INFO * info, int __user *if_mode) -{ - int err; - if (debug_level >= DEBUG_LEVEL_INFO) - printk("get_interface(%s)=%d\n", info->device_name, info->if_mode); - COPY_TO_USER(err,if_mode, &info->if_mode, sizeof(int)); - if (err) - return -EFAULT; - return 0; -} - -static int set_interface(MGSLPC_INFO * info, int if_mode) -{ - unsigned long flags; - unsigned char val; - if (debug_level >= DEBUG_LEVEL_INFO) - printk("set_interface(%s,%d)\n", info->device_name, if_mode); - spin_lock_irqsave(&info->lock, flags); - info->if_mode = if_mode; - - val = read_reg(info, PVR) & 0x0f; - switch (info->if_mode) - { - case MGSL_INTERFACE_RS232: val |= PVR_RS232; break; - case MGSL_INTERFACE_V35: val |= PVR_V35; break; - case MGSL_INTERFACE_RS422: val |= PVR_RS422; break; - } - write_reg(info, PVR, val); - - spin_unlock_irqrestore(&info->lock, flags); - return 0; -} - -static int set_txenable(MGSLPC_INFO * info, int enable, struct tty_struct *tty) -{ - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("set_txenable(%s,%d)\n", info->device_name, enable); - - spin_lock_irqsave(&info->lock, flags); - if (enable) { - if (!info->tx_enabled) - tx_start(info, tty); - } else { - if (info->tx_enabled) - tx_stop(info); - } - spin_unlock_irqrestore(&info->lock, flags); - return 0; -} - -static int tx_abort(MGSLPC_INFO * info) -{ - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("tx_abort(%s)\n", info->device_name); - - spin_lock_irqsave(&info->lock, flags); - if (info->tx_active && info->tx_count && - info->params.mode == MGSL_MODE_HDLC) { - /* clear data count so FIFO is not filled on next IRQ. - * This results in underrun and abort transmission. - */ - info->tx_count = info->tx_put = info->tx_get = 0; - info->tx_aborting = true; - } - spin_unlock_irqrestore(&info->lock, flags); - return 0; -} - -static int set_rxenable(MGSLPC_INFO * info, int enable) -{ - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("set_rxenable(%s,%d)\n", info->device_name, enable); - - spin_lock_irqsave(&info->lock, flags); - if (enable) { - if (!info->rx_enabled) - rx_start(info); - } else { - if (info->rx_enabled) - rx_stop(info); - } - spin_unlock_irqrestore(&info->lock, flags); - return 0; -} - -/* wait for specified event to occur - * - * Arguments: info pointer to device instance data - * mask pointer to bitmask of events to wait for - * Return Value: 0 if successful and bit mask updated with - * of events triggerred, - * otherwise error code - */ -static int wait_events(MGSLPC_INFO * info, int __user *mask_ptr) -{ - unsigned long flags; - int s; - int rc=0; - struct mgsl_icount cprev, cnow; - int events; - int mask; - struct _input_signal_events oldsigs, newsigs; - DECLARE_WAITQUEUE(wait, current); - - COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int)); - if (rc) - return -EFAULT; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("wait_events(%s,%d)\n", info->device_name, mask); - - spin_lock_irqsave(&info->lock, flags); - - /* return immediately if state matches requested events */ - get_signals(info); - s = info->serial_signals; - events = mask & - ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) + - ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) + - ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) + - ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) ); - if (events) { - spin_unlock_irqrestore(&info->lock, flags); - goto exit; - } - - /* save current irq counts */ - cprev = info->icount; - oldsigs = info->input_signal_events; - - if ((info->params.mode == MGSL_MODE_HDLC) && - (mask & MgslEvent_ExitHuntMode)) - irq_enable(info, CHA, IRQ_EXITHUNT); - - set_current_state(TASK_INTERRUPTIBLE); - add_wait_queue(&info->event_wait_q, &wait); - - spin_unlock_irqrestore(&info->lock, flags); - - - for(;;) { - schedule(); - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - - /* get current irq counts */ - spin_lock_irqsave(&info->lock, flags); - cnow = info->icount; - newsigs = info->input_signal_events; - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->lock, flags); - - /* if no change, wait aborted for some reason */ - if (newsigs.dsr_up == oldsigs.dsr_up && - newsigs.dsr_down == oldsigs.dsr_down && - newsigs.dcd_up == oldsigs.dcd_up && - newsigs.dcd_down == oldsigs.dcd_down && - newsigs.cts_up == oldsigs.cts_up && - newsigs.cts_down == oldsigs.cts_down && - newsigs.ri_up == oldsigs.ri_up && - newsigs.ri_down == oldsigs.ri_down && - cnow.exithunt == cprev.exithunt && - cnow.rxidle == cprev.rxidle) { - rc = -EIO; - break; - } - - events = mask & - ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) + - (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) + - (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) + - (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) + - (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) + - (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) + - (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) + - (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) + - (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) + - (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) ); - if (events) - break; - - cprev = cnow; - oldsigs = newsigs; - } - - remove_wait_queue(&info->event_wait_q, &wait); - set_current_state(TASK_RUNNING); - - if (mask & MgslEvent_ExitHuntMode) { - spin_lock_irqsave(&info->lock, flags); - if (!waitqueue_active(&info->event_wait_q)) - irq_disable(info, CHA, IRQ_EXITHUNT); - spin_unlock_irqrestore(&info->lock, flags); - } -exit: - if (rc == 0) - PUT_USER(rc, events, mask_ptr); - return rc; -} - -static int modem_input_wait(MGSLPC_INFO *info,int arg) -{ - unsigned long flags; - int rc; - struct mgsl_icount cprev, cnow; - DECLARE_WAITQUEUE(wait, current); - - /* save current irq counts */ - spin_lock_irqsave(&info->lock, flags); - cprev = info->icount; - add_wait_queue(&info->status_event_wait_q, &wait); - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->lock, flags); - - for(;;) { - schedule(); - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - - /* get new irq counts */ - spin_lock_irqsave(&info->lock, flags); - cnow = info->icount; - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->lock, flags); - - /* if no change, wait aborted for some reason */ - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { - rc = -EIO; - break; - } - - /* check for change in caller specified modem input */ - if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) || - (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) || - (arg & TIOCM_CD && cnow.dcd != cprev.dcd) || - (arg & TIOCM_CTS && cnow.cts != cprev.cts)) { - rc = 0; - break; - } - - cprev = cnow; - } - remove_wait_queue(&info->status_event_wait_q, &wait); - set_current_state(TASK_RUNNING); - return rc; -} - -/* return the state of the serial control and status signals - */ -static int tiocmget(struct tty_struct *tty) -{ - MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; - unsigned int result; - unsigned long flags; - - spin_lock_irqsave(&info->lock, flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock, flags); - - result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) + - ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) + - ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) + - ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) + - ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) + - ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0); - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s tiocmget() value=%08X\n", - __FILE__, __LINE__, info->device_name, result); - return result; -} - -/* set modem control signals (DTR/RTS) - */ -static int tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s tiocmset(%x,%x)\n", - __FILE__, __LINE__, info->device_name, set, clear); - - if (set & TIOCM_RTS) - info->serial_signals |= SerialSignal_RTS; - if (set & TIOCM_DTR) - info->serial_signals |= SerialSignal_DTR; - if (clear & TIOCM_RTS) - info->serial_signals &= ~SerialSignal_RTS; - if (clear & TIOCM_DTR) - info->serial_signals &= ~SerialSignal_DTR; - - spin_lock_irqsave(&info->lock, flags); - set_signals(info); - spin_unlock_irqrestore(&info->lock, flags); - - return 0; -} - -/* Set or clear transmit break condition - * - * Arguments: tty pointer to tty instance data - * break_state -1=set break condition, 0=clear - */ -static int mgslpc_break(struct tty_struct *tty, int break_state) -{ - MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_break(%s,%d)\n", - __FILE__, __LINE__, info->device_name, break_state); - - if (mgslpc_paranoia_check(info, tty->name, "mgslpc_break")) - return -EINVAL; - - spin_lock_irqsave(&info->lock, flags); - if (break_state == -1) - set_reg_bits(info, CHA+DAFO, BIT6); - else - clear_reg_bits(info, CHA+DAFO, BIT6); - spin_unlock_irqrestore(&info->lock, flags); - return 0; -} - -static int mgslpc_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; - struct mgsl_icount cnow; /* kernel counter temps */ - unsigned long flags; - - spin_lock_irqsave(&info->lock, flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->lock, flags); - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - - return 0; -} - -/* Service an IOCTL request - * - * Arguments: - * - * tty pointer to tty instance data - * cmd IOCTL command code - * arg command argument/context - * - * Return Value: 0 if success, otherwise error code - */ -static int mgslpc_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; - void __user *argp = (void __user *)arg; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__, __LINE__, - info->device_name, cmd); - - if (mgslpc_paranoia_check(info, tty->name, "mgslpc_ioctl")) - return -ENODEV; - - if (cmd != TIOCMIWAIT) { - if (tty_io_error(tty)) - return -EIO; - } - - switch (cmd) { - case MGSL_IOCGPARAMS: - return get_params(info, argp); - case MGSL_IOCSPARAMS: - return set_params(info, argp, tty); - case MGSL_IOCGTXIDLE: - return get_txidle(info, argp); - case MGSL_IOCSTXIDLE: - return set_txidle(info, (int)arg); - case MGSL_IOCGIF: - return get_interface(info, argp); - case MGSL_IOCSIF: - return set_interface(info,(int)arg); - case MGSL_IOCTXENABLE: - return set_txenable(info,(int)arg, tty); - case MGSL_IOCRXENABLE: - return set_rxenable(info,(int)arg); - case MGSL_IOCTXABORT: - return tx_abort(info); - case MGSL_IOCGSTATS: - return get_stats(info, argp); - case MGSL_IOCWAITEVENT: - return wait_events(info, argp); - case TIOCMIWAIT: - return modem_input_wait(info,(int)arg); - default: - return -ENOIOCTLCMD; - } - return 0; -} - -/* Set new termios settings - * - * Arguments: - * - * tty pointer to tty structure - * termios pointer to buffer to hold returned old termios - */ -static void mgslpc_set_termios(struct tty_struct *tty, - const struct ktermios *old_termios) -{ - MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_set_termios %s\n", __FILE__, __LINE__, - tty->driver->name); - - /* just return if nothing has changed */ - if ((tty->termios.c_cflag == old_termios->c_cflag) - && (RELEVANT_IFLAG(tty->termios.c_iflag) - == RELEVANT_IFLAG(old_termios->c_iflag))) - return; - - mgslpc_change_params(info, tty); - - /* Handle transition to B0 status */ - if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) { - info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - spin_lock_irqsave(&info->lock, flags); - set_signals(info); - spin_unlock_irqrestore(&info->lock, flags); - } - - /* Handle transition away from B0 status */ - if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) { - info->serial_signals |= SerialSignal_DTR; - if (!C_CRTSCTS(tty) || !tty_throttled(tty)) - info->serial_signals |= SerialSignal_RTS; - spin_lock_irqsave(&info->lock, flags); - set_signals(info); - spin_unlock_irqrestore(&info->lock, flags); - } - - /* Handle turning off CRTSCTS */ - if (old_termios->c_cflag & CRTSCTS && !C_CRTSCTS(tty)) { - tty->hw_stopped = false; - tx_release(tty); - } -} - -static void mgslpc_close(struct tty_struct *tty, struct file * filp) -{ - MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; - struct tty_port *port = &info->port; - - if (mgslpc_paranoia_check(info, tty->name, "mgslpc_close")) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_close(%s) entry, count=%d\n", - __FILE__, __LINE__, info->device_name, port->count); - - if (tty_port_close_start(port, tty, filp) == 0) - goto cleanup; - - if (tty_port_initialized(port)) - mgslpc_wait_until_sent(tty, info->timeout); - - mgslpc_flush_buffer(tty); - - tty_ldisc_flush(tty); - shutdown(info, tty); - - tty_port_close_end(port, tty); - tty_port_tty_set(port, NULL); -cleanup: - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_close(%s) exit, count=%d\n", __FILE__, __LINE__, - tty->driver->name, port->count); -} - -/* Wait until the transmitter is empty. - */ -static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout) -{ - MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; - unsigned long orig_jiffies, char_time; - - if (!info) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_wait_until_sent(%s) entry\n", - __FILE__, __LINE__, info->device_name); - - if (mgslpc_paranoia_check(info, tty->name, "mgslpc_wait_until_sent")) - return; - - if (!tty_port_initialized(&info->port)) - goto exit; - - orig_jiffies = jiffies; - - /* Set check interval to 1/5 of estimated time to - * send a character, and make it at least 1. The check - * interval should also be less than the timeout. - * Note: use tight timings here to satisfy the NIST-PCTS. - */ - - if (info->params.data_rate) { - char_time = info->timeout/(32 * 5); - if (!char_time) - char_time++; - } else - char_time = 1; - - if (timeout) - char_time = min_t(unsigned long, char_time, timeout); - - if (info->params.mode == MGSL_MODE_HDLC) { - while (info->tx_active) { - msleep_interruptible(jiffies_to_msecs(char_time)); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - } - } else { - while ((info->tx_count || info->tx_active) && - info->tx_enabled) { - msleep_interruptible(jiffies_to_msecs(char_time)); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - } - } - -exit: - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_wait_until_sent(%s) exit\n", - __FILE__, __LINE__, info->device_name); -} - -/* Called by tty_hangup() when a hangup is signaled. - * This is the same as closing all open files for the port. - */ -static void mgslpc_hangup(struct tty_struct *tty) -{ - MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_hangup(%s)\n", - __FILE__, __LINE__, info->device_name); - - if (mgslpc_paranoia_check(info, tty->name, "mgslpc_hangup")) - return; - - mgslpc_flush_buffer(tty); - shutdown(info, tty); - tty_port_hangup(&info->port); -} - -static bool carrier_raised(struct tty_port *port) -{ - MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port); - unsigned long flags; - - spin_lock_irqsave(&info->lock, flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock, flags); - - return info->serial_signals & SerialSignal_DCD; -} - -static void dtr_rts(struct tty_port *port, bool active) -{ - MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port); - unsigned long flags; - - spin_lock_irqsave(&info->lock, flags); - if (active) - info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR; - else - info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - set_signals(info); - spin_unlock_irqrestore(&info->lock, flags); -} - - -static int mgslpc_open(struct tty_struct *tty, struct file * filp) -{ - MGSLPC_INFO *info; - struct tty_port *port; - int retval, line; - unsigned long flags; - - /* verify range of specified line number */ - line = tty->index; - if (line >= mgslpc_device_count) { - printk("%s(%d):mgslpc_open with invalid line #%d.\n", - __FILE__, __LINE__, line); - return -ENODEV; - } - - /* find the info structure for the specified line */ - info = mgslpc_device_list; - while(info && info->line != line) - info = info->next_device; - if (mgslpc_paranoia_check(info, tty->name, "mgslpc_open")) - return -ENODEV; - - port = &info->port; - tty->driver_data = info; - tty_port_tty_set(port, tty); - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_open(%s), old ref count = %d\n", - __FILE__, __LINE__, tty->driver->name, port->count); - - spin_lock_irqsave(&info->netlock, flags); - if (info->netcount) { - retval = -EBUSY; - spin_unlock_irqrestore(&info->netlock, flags); - goto cleanup; - } - spin_lock(&port->lock); - port->count++; - spin_unlock(&port->lock); - spin_unlock_irqrestore(&info->netlock, flags); - - if (port->count == 1) { - /* 1st open on this device, init hardware */ - retval = startup(info, tty); - if (retval < 0) - goto cleanup; - } - - retval = tty_port_block_til_ready(&info->port, tty, filp); - if (retval) { - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):block_til_ready(%s) returned %d\n", - __FILE__, __LINE__, info->device_name, retval); - goto cleanup; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_open(%s) success\n", - __FILE__, __LINE__, info->device_name); - retval = 0; - -cleanup: - return retval; -} - -/* - * /proc fs routines.... - */ - -static inline void line_info(struct seq_file *m, MGSLPC_INFO *info) -{ - char stat_buf[30]; - unsigned long flags; - - seq_printf(m, "%s:io:%04X irq:%d", - info->device_name, info->io_base, info->irq_level); - - /* output current serial signal states */ - spin_lock_irqsave(&info->lock, flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock, flags); - - stat_buf[0] = 0; - stat_buf[1] = 0; - if (info->serial_signals & SerialSignal_RTS) - strcat(stat_buf, "|RTS"); - if (info->serial_signals & SerialSignal_CTS) - strcat(stat_buf, "|CTS"); - if (info->serial_signals & SerialSignal_DTR) - strcat(stat_buf, "|DTR"); - if (info->serial_signals & SerialSignal_DSR) - strcat(stat_buf, "|DSR"); - if (info->serial_signals & SerialSignal_DCD) - strcat(stat_buf, "|CD"); - if (info->serial_signals & SerialSignal_RI) - strcat(stat_buf, "|RI"); - - if (info->params.mode == MGSL_MODE_HDLC) { - seq_printf(m, " HDLC txok:%d rxok:%d", - info->icount.txok, info->icount.rxok); - if (info->icount.txunder) - seq_printf(m, " txunder:%d", info->icount.txunder); - if (info->icount.txabort) - seq_printf(m, " txabort:%d", info->icount.txabort); - if (info->icount.rxshort) - seq_printf(m, " rxshort:%d", info->icount.rxshort); - if (info->icount.rxlong) - seq_printf(m, " rxlong:%d", info->icount.rxlong); - if (info->icount.rxover) - seq_printf(m, " rxover:%d", info->icount.rxover); - if (info->icount.rxcrc) - seq_printf(m, " rxcrc:%d", info->icount.rxcrc); - } else { - seq_printf(m, " ASYNC tx:%d rx:%d", - info->icount.tx, info->icount.rx); - if (info->icount.frame) - seq_printf(m, " fe:%d", info->icount.frame); - if (info->icount.parity) - seq_printf(m, " pe:%d", info->icount.parity); - if (info->icount.brk) - seq_printf(m, " brk:%d", info->icount.brk); - if (info->icount.overrun) - seq_printf(m, " oe:%d", info->icount.overrun); - } - - /* Append serial signal status to end */ - seq_printf(m, " %s\n", stat_buf+1); - - seq_printf(m, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", - info->tx_active,info->bh_requested,info->bh_running, - info->pending_bh); -} - -/* Called to print information about devices - */ -static int mgslpc_proc_show(struct seq_file *m, void *v) -{ - MGSLPC_INFO *info; - - seq_printf(m, "synclink driver:%s\n", driver_version); - - info = mgslpc_device_list; - while (info) { - line_info(m, info); - info = info->next_device; - } - return 0; -} - -static int rx_alloc_buffers(MGSLPC_INFO *info) -{ - /* each buffer has header and data */ - info->rx_buf_size = sizeof(RXBUF) + info->max_frame_size; - - /* calculate total allocation size for 8 buffers */ - info->rx_buf_total_size = info->rx_buf_size * 8; - - /* limit total allocated memory */ - if (info->rx_buf_total_size > 0x10000) - info->rx_buf_total_size = 0x10000; - - /* calculate number of buffers */ - info->rx_buf_count = info->rx_buf_total_size / info->rx_buf_size; - - info->rx_buf = kmalloc(info->rx_buf_total_size, GFP_KERNEL); - if (info->rx_buf == NULL) - return -ENOMEM; - - /* unused flag buffer to satisfy receive_buf calling interface */ - info->flag_buf = kzalloc(info->max_frame_size, GFP_KERNEL); - if (!info->flag_buf) { - kfree(info->rx_buf); - info->rx_buf = NULL; - return -ENOMEM; - } - - rx_reset_buffers(info); - return 0; -} - -static void rx_free_buffers(MGSLPC_INFO *info) -{ - kfree(info->rx_buf); - info->rx_buf = NULL; - kfree(info->flag_buf); - info->flag_buf = NULL; -} - -static int claim_resources(MGSLPC_INFO *info) -{ - if (rx_alloc_buffers(info) < 0) { - printk("Can't allocate rx buffer %s\n", info->device_name); - release_resources(info); - return -ENODEV; - } - return 0; -} - -static void release_resources(MGSLPC_INFO *info) -{ - if (debug_level >= DEBUG_LEVEL_INFO) - printk("release_resources(%s)\n", info->device_name); - rx_free_buffers(info); -} - -/* Add the specified device instance data structure to the - * global linked list of devices and increment the device count. - * - * Arguments: info pointer to device instance data - */ -static int mgslpc_add_device(MGSLPC_INFO *info) -{ - MGSLPC_INFO *current_dev = NULL; - struct device *tty_dev; - int ret; - - info->next_device = NULL; - info->line = mgslpc_device_count; - sprintf(info->device_name,"ttySLP%d",info->line); - - if (info->line < MAX_DEVICE_COUNT) { - if (maxframe[info->line]) - info->max_frame_size = maxframe[info->line]; - } - - mgslpc_device_count++; - - if (!mgslpc_device_list) - mgslpc_device_list = info; - else { - current_dev = mgslpc_device_list; - while (current_dev->next_device) - current_dev = current_dev->next_device; - current_dev->next_device = info; - } - - if (info->max_frame_size < 4096) - info->max_frame_size = 4096; - else if (info->max_frame_size > 65535) - info->max_frame_size = 65535; - - printk("SyncLink PC Card %s:IO=%04X IRQ=%d\n", - info->device_name, info->io_base, info->irq_level); - -#if SYNCLINK_GENERIC_HDLC - ret = hdlcdev_init(info); - if (ret != 0) - goto failed; -#endif - - tty_dev = tty_port_register_device(&info->port, serial_driver, info->line, - &info->p_dev->dev); - if (IS_ERR(tty_dev)) { - ret = PTR_ERR(tty_dev); -#if SYNCLINK_GENERIC_HDLC - hdlcdev_exit(info); -#endif - goto failed; - } - - return 0; - -failed: - if (current_dev) - current_dev->next_device = NULL; - else - mgslpc_device_list = NULL; - mgslpc_device_count--; - return ret; -} - -static void mgslpc_remove_device(MGSLPC_INFO *remove_info) -{ - MGSLPC_INFO *info = mgslpc_device_list; - MGSLPC_INFO *last = NULL; - - while(info) { - if (info == remove_info) { - if (last) - last->next_device = info->next_device; - else - mgslpc_device_list = info->next_device; - tty_unregister_device(serial_driver, info->line); -#if SYNCLINK_GENERIC_HDLC - hdlcdev_exit(info); -#endif - release_resources(info); - tty_port_destroy(&info->port); - kfree(info); - mgslpc_device_count--; - return; - } - last = info; - info = info->next_device; - } -} - -static const struct pcmcia_device_id mgslpc_ids[] = { - PCMCIA_DEVICE_MANF_CARD(0x02c5, 0x0050), - PCMCIA_DEVICE_NULL -}; -MODULE_DEVICE_TABLE(pcmcia, mgslpc_ids); - -static struct pcmcia_driver mgslpc_driver = { - .owner = THIS_MODULE, - .name = "synclink_cs", - .probe = mgslpc_probe, - .remove = mgslpc_detach, - .id_table = mgslpc_ids, - .suspend = mgslpc_suspend, - .resume = mgslpc_resume, -}; - -static const struct tty_operations mgslpc_ops = { - .open = mgslpc_open, - .close = mgslpc_close, - .write = mgslpc_write, - .put_char = mgslpc_put_char, - .flush_chars = mgslpc_flush_chars, - .write_room = mgslpc_write_room, - .chars_in_buffer = mgslpc_chars_in_buffer, - .flush_buffer = mgslpc_flush_buffer, - .ioctl = mgslpc_ioctl, - .throttle = mgslpc_throttle, - .unthrottle = mgslpc_unthrottle, - .send_xchar = mgslpc_send_xchar, - .break_ctl = mgslpc_break, - .wait_until_sent = mgslpc_wait_until_sent, - .set_termios = mgslpc_set_termios, - .stop = tx_pause, - .start = tx_release, - .hangup = mgslpc_hangup, - .tiocmget = tiocmget, - .tiocmset = tiocmset, - .get_icount = mgslpc_get_icount, - .proc_show = mgslpc_proc_show, -}; - -static int __init synclink_cs_init(void) -{ - int rc; - - if (break_on_load) { - mgslpc_get_text_ptr(); - BREAKPOINT(); - } - - serial_driver = tty_alloc_driver(MAX_DEVICE_COUNT, - TTY_DRIVER_REAL_RAW | - TTY_DRIVER_DYNAMIC_DEV); - if (IS_ERR(serial_driver)) { - rc = PTR_ERR(serial_driver); - goto err; - } - - /* Initialize the tty_driver structure */ - serial_driver->driver_name = "synclink_cs"; - serial_driver->name = "ttySLP"; - serial_driver->major = ttymajor; - serial_driver->minor_start = 64; - serial_driver->type = TTY_DRIVER_TYPE_SERIAL; - serial_driver->subtype = SERIAL_TYPE_NORMAL; - serial_driver->init_termios = tty_std_termios; - serial_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - tty_set_operations(serial_driver, &mgslpc_ops); - - rc = tty_register_driver(serial_driver); - if (rc < 0) { - printk(KERN_ERR "%s(%d):Couldn't register serial driver\n", - __FILE__, __LINE__); - goto err_put_tty; - } - - rc = pcmcia_register_driver(&mgslpc_driver); - if (rc < 0) - goto err_unreg_tty; - - printk(KERN_INFO "%s %s, tty major#%d\n", driver_name, driver_version, - serial_driver->major); - - return 0; -err_unreg_tty: - tty_unregister_driver(serial_driver); -err_put_tty: - tty_driver_kref_put(serial_driver); -err: - return rc; -} - -static void __exit synclink_cs_exit(void) -{ - pcmcia_unregister_driver(&mgslpc_driver); - tty_unregister_driver(serial_driver); - tty_driver_kref_put(serial_driver); -} - -module_init(synclink_cs_init); -module_exit(synclink_cs_exit); - -static void mgslpc_set_rate(MGSLPC_INFO *info, unsigned char channel, unsigned int rate) -{ - unsigned int M, N; - unsigned char val; - - /* note:standard BRG mode is broken in V3.2 chip - * so enhanced mode is always used - */ - - if (rate) { - N = 3686400 / rate; - if (!N) - N = 1; - N >>= 1; - for (M = 1; N > 64 && M < 16; M++) - N >>= 1; - N--; - - /* BGR[5..0] = N - * BGR[9..6] = M - * BGR[7..0] contained in BGR register - * BGR[9..8] contained in CCR2[7..6] - * divisor = (N+1)*2^M - * - * Note: M *must* not be zero (causes asymetric duty cycle) - */ - write_reg(info, (unsigned char) (channel + BGR), - (unsigned char) ((M << 6) + N)); - val = read_reg(info, (unsigned char) (channel + CCR2)) & 0x3f; - val |= ((M << 4) & 0xc0); - write_reg(info, (unsigned char) (channel + CCR2), val); - } -} - -/* Enabled the AUX clock output at the specified frequency. - */ -static void enable_auxclk(MGSLPC_INFO *info) -{ - unsigned char val; - - /* MODE - * - * 07..06 MDS[1..0] 10 = transparent HDLC mode - * 05 ADM Address Mode, 0 = no addr recognition - * 04 TMD Timer Mode, 0 = external - * 03 RAC Receiver Active, 0 = inactive - * 02 RTS 0=RTS active during xmit, 1=RTS always active - * 01 TRS Timer Resolution, 1=512 - * 00 TLP Test Loop, 0 = no loop - * - * 1000 0010 - */ - val = 0x82; - - /* channel B RTS is used to enable AUXCLK driver on SP505 */ - if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed) - val |= BIT2; - write_reg(info, CHB + MODE, val); - - /* CCR0 - * - * 07 PU Power Up, 1=active, 0=power down - * 06 MCE Master Clock Enable, 1=enabled - * 05 Reserved, 0 - * 04..02 SC[2..0] Encoding - * 01..00 SM[1..0] Serial Mode, 00=HDLC - * - * 11000000 - */ - write_reg(info, CHB + CCR0, 0xc0); - - /* CCR1 - * - * 07 SFLG Shared Flag, 0 = disable shared flags - * 06 GALP Go Active On Loop, 0 = not used - * 05 GLP Go On Loop, 0 = not used - * 04 ODS Output Driver Select, 1=TxD is push-pull output - * 03 ITF Interframe Time Fill, 0=mark, 1=flag - * 02..00 CM[2..0] Clock Mode - * - * 0001 0111 - */ - write_reg(info, CHB + CCR1, 0x17); - - /* CCR2 (Channel B) - * - * 07..06 BGR[9..8] Baud rate bits 9..8 - * 05 BDF Baud rate divisor factor, 0=1, 1=BGR value - * 04 SSEL Clock source select, 1=submode b - * 03 TOE 0=TxCLK is input, 1=TxCLK is output - * 02 RWX Read/Write Exchange 0=disabled - * 01 C32, CRC select, 0=CRC-16, 1=CRC-32 - * 00 DIV, data inversion 0=disabled, 1=enabled - * - * 0011 1000 - */ - if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed) - write_reg(info, CHB + CCR2, 0x38); - else - write_reg(info, CHB + CCR2, 0x30); - - /* CCR4 - * - * 07 MCK4 Master Clock Divide by 4, 1=enabled - * 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled - * 05 TST1 Test Pin, 0=normal operation - * 04 ICD Ivert Carrier Detect, 1=enabled (active low) - * 03..02 Reserved, must be 0 - * 01..00 RFT[1..0] RxFIFO Threshold 00=32 bytes - * - * 0101 0000 - */ - write_reg(info, CHB + CCR4, 0x50); - - /* if auxclk not enabled, set internal BRG so - * CTS transitions can be detected (requires TxC) - */ - if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed) - mgslpc_set_rate(info, CHB, info->params.clock_speed); - else - mgslpc_set_rate(info, CHB, 921600); -} - -static void loopback_enable(MGSLPC_INFO *info) -{ - unsigned char val; - - /* CCR1:02..00 CM[2..0] Clock Mode = 111 (clock mode 7) */ - val = read_reg(info, CHA + CCR1) | (BIT2 | BIT1 | BIT0); - write_reg(info, CHA + CCR1, val); - - /* CCR2:04 SSEL Clock source select, 1=submode b */ - val = read_reg(info, CHA + CCR2) | (BIT4 | BIT5); - write_reg(info, CHA + CCR2, val); - - /* set LinkSpeed if available, otherwise default to 2Mbps */ - if (info->params.clock_speed) - mgslpc_set_rate(info, CHA, info->params.clock_speed); - else - mgslpc_set_rate(info, CHA, 1843200); - - /* MODE:00 TLP Test Loop, 1=loopback enabled */ - val = read_reg(info, CHA + MODE) | BIT0; - write_reg(info, CHA + MODE, val); -} - -static void hdlc_mode(MGSLPC_INFO *info) -{ - unsigned char val; - unsigned char clkmode, clksubmode; - - /* disable all interrupts */ - irq_disable(info, CHA, 0xffff); - irq_disable(info, CHB, 0xffff); - port_irq_disable(info, 0xff); - - /* assume clock mode 0a, rcv=RxC xmt=TxC */ - clkmode = clksubmode = 0; - if (info->params.flags & HDLC_FLAG_RXC_DPLL - && info->params.flags & HDLC_FLAG_TXC_DPLL) { - /* clock mode 7a, rcv = DPLL, xmt = DPLL */ - clkmode = 7; - } else if (info->params.flags & HDLC_FLAG_RXC_BRG - && info->params.flags & HDLC_FLAG_TXC_BRG) { - /* clock mode 7b, rcv = BRG, xmt = BRG */ - clkmode = 7; - clksubmode = 1; - } else if (info->params.flags & HDLC_FLAG_RXC_DPLL) { - if (info->params.flags & HDLC_FLAG_TXC_BRG) { - /* clock mode 6b, rcv = DPLL, xmt = BRG/16 */ - clkmode = 6; - clksubmode = 1; - } else { - /* clock mode 6a, rcv = DPLL, xmt = TxC */ - clkmode = 6; - } - } else if (info->params.flags & HDLC_FLAG_TXC_BRG) { - /* clock mode 0b, rcv = RxC, xmt = BRG */ - clksubmode = 1; - } - - /* MODE - * - * 07..06 MDS[1..0] 10 = transparent HDLC mode - * 05 ADM Address Mode, 0 = no addr recognition - * 04 TMD Timer Mode, 0 = external - * 03 RAC Receiver Active, 0 = inactive - * 02 RTS 0=RTS active during xmit, 1=RTS always active - * 01 TRS Timer Resolution, 1=512 - * 00 TLP Test Loop, 0 = no loop - * - * 1000 0010 - */ - val = 0x82; - if (info->params.loopback) - val |= BIT0; - - /* preserve RTS state */ - if (info->serial_signals & SerialSignal_RTS) - val |= BIT2; - write_reg(info, CHA + MODE, val); - - /* CCR0 - * - * 07 PU Power Up, 1=active, 0=power down - * 06 MCE Master Clock Enable, 1=enabled - * 05 Reserved, 0 - * 04..02 SC[2..0] Encoding - * 01..00 SM[1..0] Serial Mode, 00=HDLC - * - * 11000000 - */ - val = 0xc0; - switch (info->params.encoding) - { - case HDLC_ENCODING_NRZI: - val |= BIT3; - break; - case HDLC_ENCODING_BIPHASE_SPACE: - val |= BIT4; - break; // FM0 - case HDLC_ENCODING_BIPHASE_MARK: - val |= BIT4 | BIT2; - break; // FM1 - case HDLC_ENCODING_BIPHASE_LEVEL: - val |= BIT4 | BIT3; - break; // Manchester - } - write_reg(info, CHA + CCR0, val); - - /* CCR1 - * - * 07 SFLG Shared Flag, 0 = disable shared flags - * 06 GALP Go Active On Loop, 0 = not used - * 05 GLP Go On Loop, 0 = not used - * 04 ODS Output Driver Select, 1=TxD is push-pull output - * 03 ITF Interframe Time Fill, 0=mark, 1=flag - * 02..00 CM[2..0] Clock Mode - * - * 0001 0000 - */ - val = 0x10 + clkmode; - write_reg(info, CHA + CCR1, val); - - /* CCR2 - * - * 07..06 BGR[9..8] Baud rate bits 9..8 - * 05 BDF Baud rate divisor factor, 0=1, 1=BGR value - * 04 SSEL Clock source select, 1=submode b - * 03 TOE 0=TxCLK is input, 0=TxCLK is input - * 02 RWX Read/Write Exchange 0=disabled - * 01 C32, CRC select, 0=CRC-16, 1=CRC-32 - * 00 DIV, data inversion 0=disabled, 1=enabled - * - * 0000 0000 - */ - val = 0x00; - if (clkmode == 2 || clkmode == 3 || clkmode == 6 - || clkmode == 7 || (clkmode == 0 && clksubmode == 1)) - val |= BIT5; - if (clksubmode) - val |= BIT4; - if (info->params.crc_type == HDLC_CRC_32_CCITT) - val |= BIT1; - if (info->params.encoding == HDLC_ENCODING_NRZB) - val |= BIT0; - write_reg(info, CHA + CCR2, val); - - /* CCR3 - * - * 07..06 PRE[1..0] Preamble count 00=1, 01=2, 10=4, 11=8 - * 05 EPT Enable preamble transmission, 1=enabled - * 04 RADD Receive address pushed to FIFO, 0=disabled - * 03 CRL CRC Reset Level, 0=FFFF - * 02 RCRC Rx CRC 0=On 1=Off - * 01 TCRC Tx CRC 0=On 1=Off - * 00 PSD DPLL Phase Shift Disable - * - * 0000 0000 - */ - val = 0x00; - if (info->params.crc_type == HDLC_CRC_NONE) - val |= BIT2 | BIT1; - if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE) - val |= BIT5; - switch (info->params.preamble_length) - { - case HDLC_PREAMBLE_LENGTH_16BITS: - val |= BIT6; - break; - case HDLC_PREAMBLE_LENGTH_32BITS: - val |= BIT6; - break; - case HDLC_PREAMBLE_LENGTH_64BITS: - val |= BIT7 | BIT6; - break; - } - write_reg(info, CHA + CCR3, val); - - /* PRE - Preamble pattern */ - val = 0; - switch (info->params.preamble) - { - case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break; - case HDLC_PREAMBLE_PATTERN_10: val = 0xaa; break; - case HDLC_PREAMBLE_PATTERN_01: val = 0x55; break; - case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break; - } - write_reg(info, CHA + PRE, val); - - /* CCR4 - * - * 07 MCK4 Master Clock Divide by 4, 1=enabled - * 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled - * 05 TST1 Test Pin, 0=normal operation - * 04 ICD Ivert Carrier Detect, 1=enabled (active low) - * 03..02 Reserved, must be 0 - * 01..00 RFT[1..0] RxFIFO Threshold 00=32 bytes - * - * 0101 0000 - */ - val = 0x50; - write_reg(info, CHA + CCR4, val); - if (info->params.flags & HDLC_FLAG_RXC_DPLL) - mgslpc_set_rate(info, CHA, info->params.clock_speed * 16); - else - mgslpc_set_rate(info, CHA, info->params.clock_speed); - - /* RLCR Receive length check register - * - * 7 1=enable receive length check - * 6..0 Max frame length = (RL + 1) * 32 - */ - write_reg(info, CHA + RLCR, 0); - - /* XBCH Transmit Byte Count High - * - * 07 DMA mode, 0 = interrupt driven - * 06 NRM, 0=ABM (ignored) - * 05 CAS Carrier Auto Start - * 04 XC Transmit Continuously (ignored) - * 03..00 XBC[10..8] Transmit byte count bits 10..8 - * - * 0000 0000 - */ - val = 0x00; - if (info->params.flags & HDLC_FLAG_AUTO_DCD) - val |= BIT5; - write_reg(info, CHA + XBCH, val); - enable_auxclk(info); - if (info->params.loopback || info->testing_irq) - loopback_enable(info); - if (info->params.flags & HDLC_FLAG_AUTO_CTS) - { - irq_enable(info, CHB, IRQ_CTS); - /* PVR[3] 1=AUTO CTS active */ - set_reg_bits(info, CHA + PVR, BIT3); - } else - clear_reg_bits(info, CHA + PVR, BIT3); - - irq_enable(info, CHA, - IRQ_RXEOM | IRQ_RXFIFO | IRQ_ALLSENT | - IRQ_UNDERRUN | IRQ_TXFIFO); - issue_command(info, CHA, CMD_TXRESET + CMD_RXRESET); - wait_command_complete(info, CHA); - read_reg16(info, CHA + ISR); /* clear pending IRQs */ - - /* Master clock mode enabled above to allow reset commands - * to complete even if no data clocks are present. - * - * Disable master clock mode for normal communications because - * V3.2 of the ESCC2 has a bug that prevents the transmit all sent - * IRQ when in master clock mode. - * - * Leave master clock mode enabled for IRQ test because the - * timer IRQ used by the test can only happen in master clock mode. - */ - if (!info->testing_irq) - clear_reg_bits(info, CHA + CCR0, BIT6); - - tx_set_idle(info); - - tx_stop(info); - rx_stop(info); -} - -static void rx_stop(MGSLPC_INFO *info) -{ - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):rx_stop(%s)\n", - __FILE__, __LINE__, info->device_name); - - /* MODE:03 RAC Receiver Active, 0=inactive */ - clear_reg_bits(info, CHA + MODE, BIT3); - - info->rx_enabled = false; - info->rx_overflow = false; -} - -static void rx_start(MGSLPC_INFO *info) -{ - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):rx_start(%s)\n", - __FILE__, __LINE__, info->device_name); - - rx_reset_buffers(info); - info->rx_enabled = false; - info->rx_overflow = false; - - /* MODE:03 RAC Receiver Active, 1=active */ - set_reg_bits(info, CHA + MODE, BIT3); - - info->rx_enabled = true; -} - -static void tx_start(MGSLPC_INFO *info, struct tty_struct *tty) -{ - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):tx_start(%s)\n", - __FILE__, __LINE__, info->device_name); - - if (info->tx_count) { - /* If auto RTS enabled and RTS is inactive, then assert */ - /* RTS and set a flag indicating that the driver should */ - /* negate RTS when the transmission completes. */ - info->drop_rts_on_tx_done = false; - - if (info->params.flags & HDLC_FLAG_AUTO_RTS) { - get_signals(info); - if (!(info->serial_signals & SerialSignal_RTS)) { - info->serial_signals |= SerialSignal_RTS; - set_signals(info); - info->drop_rts_on_tx_done = true; - } - } - - if (info->params.mode == MGSL_MODE_ASYNC) { - if (!info->tx_active) { - info->tx_active = true; - tx_ready(info, tty); - } - } else { - info->tx_active = true; - tx_ready(info, tty); - mod_timer(&info->tx_timer, jiffies + - msecs_to_jiffies(5000)); - } - } - - if (!info->tx_enabled) - info->tx_enabled = true; -} - -static void tx_stop(MGSLPC_INFO *info) -{ - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):tx_stop(%s)\n", - __FILE__, __LINE__, info->device_name); - - del_timer(&info->tx_timer); - - info->tx_enabled = false; - info->tx_active = false; -} - -/* Reset the adapter to a known state and prepare it for further use. - */ -static void reset_device(MGSLPC_INFO *info) -{ - /* power up both channels (set BIT7) */ - write_reg(info, CHA + CCR0, 0x80); - write_reg(info, CHB + CCR0, 0x80); - write_reg(info, CHA + MODE, 0); - write_reg(info, CHB + MODE, 0); - - /* disable all interrupts */ - irq_disable(info, CHA, 0xffff); - irq_disable(info, CHB, 0xffff); - port_irq_disable(info, 0xff); - - /* PCR Port Configuration Register - * - * 07..04 DEC[3..0] Serial I/F select outputs - * 03 output, 1=AUTO CTS control enabled - * 02 RI Ring Indicator input 0=active - * 01 DSR input 0=active - * 00 DTR output 0=active - * - * 0000 0110 - */ - write_reg(info, PCR, 0x06); - - /* PVR Port Value Register - * - * 07..04 DEC[3..0] Serial I/F select (0000=disabled) - * 03 AUTO CTS output 1=enabled - * 02 RI Ring Indicator input - * 01 DSR input - * 00 DTR output (1=inactive) - * - * 0000 0001 - */ -// write_reg(info, PVR, PVR_DTR); - - /* IPC Interrupt Port Configuration - * - * 07 VIS 1=Masked interrupts visible - * 06..05 Reserved, 0 - * 04..03 SLA Slave address, 00 ignored - * 02 CASM Cascading Mode, 1=daisy chain - * 01..00 IC[1..0] Interrupt Config, 01=push-pull output, active low - * - * 0000 0101 - */ - write_reg(info, IPC, 0x05); -} - -static void async_mode(MGSLPC_INFO *info) -{ - unsigned char val; - - /* disable all interrupts */ - irq_disable(info, CHA, 0xffff); - irq_disable(info, CHB, 0xffff); - port_irq_disable(info, 0xff); - - /* MODE - * - * 07 Reserved, 0 - * 06 FRTS RTS State, 0=active - * 05 FCTS Flow Control on CTS - * 04 FLON Flow Control Enable - * 03 RAC Receiver Active, 0 = inactive - * 02 RTS 0=Auto RTS, 1=manual RTS - * 01 TRS Timer Resolution, 1=512 - * 00 TLP Test Loop, 0 = no loop - * - * 0000 0110 - */ - val = 0x06; - if (info->params.loopback) - val |= BIT0; - - /* preserve RTS state */ - if (!(info->serial_signals & SerialSignal_RTS)) - val |= BIT6; - write_reg(info, CHA + MODE, val); - - /* CCR0 - * - * 07 PU Power Up, 1=active, 0=power down - * 06 MCE Master Clock Enable, 1=enabled - * 05 Reserved, 0 - * 04..02 SC[2..0] Encoding, 000=NRZ - * 01..00 SM[1..0] Serial Mode, 11=Async - * - * 1000 0011 - */ - write_reg(info, CHA + CCR0, 0x83); - - /* CCR1 - * - * 07..05 Reserved, 0 - * 04 ODS Output Driver Select, 1=TxD is push-pull output - * 03 BCR Bit Clock Rate, 1=16x - * 02..00 CM[2..0] Clock Mode, 111=BRG - * - * 0001 1111 - */ - write_reg(info, CHA + CCR1, 0x1f); - - /* CCR2 (channel A) - * - * 07..06 BGR[9..8] Baud rate bits 9..8 - * 05 BDF Baud rate divisor factor, 0=1, 1=BGR value - * 04 SSEL Clock source select, 1=submode b - * 03 TOE 0=TxCLK is input, 0=TxCLK is input - * 02 RWX Read/Write Exchange 0=disabled - * 01 Reserved, 0 - * 00 DIV, data inversion 0=disabled, 1=enabled - * - * 0001 0000 - */ - write_reg(info, CHA + CCR2, 0x10); - - /* CCR3 - * - * 07..01 Reserved, 0 - * 00 PSD DPLL Phase Shift Disable - * - * 0000 0000 - */ - write_reg(info, CHA + CCR3, 0); - - /* CCR4 - * - * 07 MCK4 Master Clock Divide by 4, 1=enabled - * 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled - * 05 TST1 Test Pin, 0=normal operation - * 04 ICD Ivert Carrier Detect, 1=enabled (active low) - * 03..00 Reserved, must be 0 - * - * 0101 0000 - */ - write_reg(info, CHA + CCR4, 0x50); - mgslpc_set_rate(info, CHA, info->params.data_rate * 16); - - /* DAFO Data Format - * - * 07 Reserved, 0 - * 06 XBRK transmit break, 0=normal operation - * 05 Stop bits (0=1, 1=2) - * 04..03 PAR[1..0] Parity (01=odd, 10=even) - * 02 PAREN Parity Enable - * 01..00 CHL[1..0] Character Length (00=8, 01=7) - * - */ - val = 0x00; - if (info->params.data_bits != 8) - val |= BIT0; /* 7 bits */ - if (info->params.stop_bits != 1) - val |= BIT5; - if (info->params.parity != ASYNC_PARITY_NONE) - { - val |= BIT2; /* Parity enable */ - if (info->params.parity == ASYNC_PARITY_ODD) - val |= BIT3; - else - val |= BIT4; - } - write_reg(info, CHA + DAFO, val); - - /* RFC Rx FIFO Control - * - * 07 Reserved, 0 - * 06 DPS, 1=parity bit not stored in data byte - * 05 DXS, 0=all data stored in FIFO (including XON/XOFF) - * 04 RFDF Rx FIFO Data Format, 1=status byte stored in FIFO - * 03..02 RFTH[1..0], rx threshold, 11=16 status + 16 data byte - * 01 Reserved, 0 - * 00 TCDE Terminate Char Detect Enable, 0=disabled - * - * 0101 1100 - */ - write_reg(info, CHA + RFC, 0x5c); - - /* RLCR Receive length check register - * - * Max frame length = (RL + 1) * 32 - */ - write_reg(info, CHA + RLCR, 0); - - /* XBCH Transmit Byte Count High - * - * 07 DMA mode, 0 = interrupt driven - * 06 NRM, 0=ABM (ignored) - * 05 CAS Carrier Auto Start - * 04 XC Transmit Continuously (ignored) - * 03..00 XBC[10..8] Transmit byte count bits 10..8 - * - * 0000 0000 - */ - val = 0x00; - if (info->params.flags & HDLC_FLAG_AUTO_DCD) - val |= BIT5; - write_reg(info, CHA + XBCH, val); - if (info->params.flags & HDLC_FLAG_AUTO_CTS) - irq_enable(info, CHA, IRQ_CTS); - - /* MODE:03 RAC Receiver Active, 1=active */ - set_reg_bits(info, CHA + MODE, BIT3); - enable_auxclk(info); - if (info->params.flags & HDLC_FLAG_AUTO_CTS) { - irq_enable(info, CHB, IRQ_CTS); - /* PVR[3] 1=AUTO CTS active */ - set_reg_bits(info, CHA + PVR, BIT3); - } else - clear_reg_bits(info, CHA + PVR, BIT3); - irq_enable(info, CHA, - IRQ_RXEOM | IRQ_RXFIFO | IRQ_BREAK_ON | IRQ_RXTIME | - IRQ_ALLSENT | IRQ_TXFIFO); - issue_command(info, CHA, CMD_TXRESET + CMD_RXRESET); - wait_command_complete(info, CHA); - read_reg16(info, CHA + ISR); /* clear pending IRQs */ -} - -/* Set the HDLC idle mode for the transmitter. - */ -static void tx_set_idle(MGSLPC_INFO *info) -{ - /* Note: ESCC2 only supports flags and one idle modes */ - if (info->idle_mode == HDLC_TXIDLE_FLAGS) - set_reg_bits(info, CHA + CCR1, BIT3); - else - clear_reg_bits(info, CHA + CCR1, BIT3); -} - -/* get state of the V24 status (input) signals. - */ -static void get_signals(MGSLPC_INFO *info) -{ - unsigned char status = 0; - - /* preserve RTS and DTR */ - info->serial_signals &= SerialSignal_RTS | SerialSignal_DTR; - - if (read_reg(info, CHB + VSTR) & BIT7) - info->serial_signals |= SerialSignal_DCD; - if (read_reg(info, CHB + STAR) & BIT1) - info->serial_signals |= SerialSignal_CTS; - - status = read_reg(info, CHA + PVR); - if (!(status & PVR_RI)) - info->serial_signals |= SerialSignal_RI; - if (!(status & PVR_DSR)) - info->serial_signals |= SerialSignal_DSR; -} - -/* Set the state of RTS and DTR based on contents of - * serial_signals member of device extension. - */ -static void set_signals(MGSLPC_INFO *info) -{ - unsigned char val; - - val = read_reg(info, CHA + MODE); - if (info->params.mode == MGSL_MODE_ASYNC) { - if (info->serial_signals & SerialSignal_RTS) - val &= ~BIT6; - else - val |= BIT6; - } else { - if (info->serial_signals & SerialSignal_RTS) - val |= BIT2; - else - val &= ~BIT2; - } - write_reg(info, CHA + MODE, val); - - if (info->serial_signals & SerialSignal_DTR) - clear_reg_bits(info, CHA + PVR, PVR_DTR); - else - set_reg_bits(info, CHA + PVR, PVR_DTR); -} - -static void rx_reset_buffers(MGSLPC_INFO *info) -{ - RXBUF *buf; - int i; - - info->rx_put = 0; - info->rx_get = 0; - info->rx_frame_count = 0; - for (i=0 ; i < info->rx_buf_count ; i++) { - buf = (RXBUF*)(info->rx_buf + (i * info->rx_buf_size)); - buf->status = buf->count = 0; - } -} - -/* Attempt to return a received HDLC frame - * Only frames received without errors are returned. - * - * Returns true if frame returned, otherwise false - */ -static bool rx_get_frame(MGSLPC_INFO *info, struct tty_struct *tty) -{ - unsigned short status; - RXBUF *buf; - unsigned int framesize = 0; - unsigned long flags; - bool return_frame = false; - - if (info->rx_frame_count == 0) - return false; - - buf = (RXBUF*)(info->rx_buf + (info->rx_get * info->rx_buf_size)); - - status = buf->status; - - /* 07 VFR 1=valid frame - * 06 RDO 1=data overrun - * 05 CRC 1=OK, 0=error - * 04 RAB 1=frame aborted - */ - if ((status & 0xf0) != 0xA0) { - if (!(status & BIT7) || (status & BIT4)) - info->icount.rxabort++; - else if (status & BIT6) - info->icount.rxover++; - else if (!(status & BIT5)) { - info->icount.rxcrc++; - if (info->params.crc_type & HDLC_CRC_RETURN_EX) - return_frame = true; - } - framesize = 0; -#if SYNCLINK_GENERIC_HDLC - { - info->netdev->stats.rx_errors++; - info->netdev->stats.rx_frame_errors++; - } -#endif - } else - return_frame = true; - - if (return_frame) - framesize = buf->count; - - if (debug_level >= DEBUG_LEVEL_BH) - printk("%s(%d):rx_get_frame(%s) status=%04X size=%d\n", - __FILE__, __LINE__, info->device_name, status, framesize); - - if (debug_level >= DEBUG_LEVEL_DATA) - trace_block(info, buf->data, framesize, 0); - - if (framesize) { - if ((info->params.crc_type & HDLC_CRC_RETURN_EX && - framesize+1 > info->max_frame_size) || - framesize > info->max_frame_size) - info->icount.rxlong++; - else { - if (status & BIT5) - info->icount.rxok++; - - if (info->params.crc_type & HDLC_CRC_RETURN_EX) { - *(buf->data + framesize) = status & BIT5 ? RX_OK:RX_CRC_ERROR; - ++framesize; - } - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_rx(info, buf->data, framesize); - else -#endif - ldisc_receive_buf(tty, buf->data, info->flag_buf, framesize); - } - } - - spin_lock_irqsave(&info->lock, flags); - buf->status = buf->count = 0; - info->rx_frame_count--; - info->rx_get++; - if (info->rx_get >= info->rx_buf_count) - info->rx_get = 0; - spin_unlock_irqrestore(&info->lock, flags); - - return true; -} - -static bool register_test(MGSLPC_INFO *info) -{ - static unsigned char patterns[] = - { 0x00, 0xff, 0xaa, 0x55, 0x69, 0x96, 0x0f }; - static unsigned int count = ARRAY_SIZE(patterns); - unsigned int i; - bool rc = true; - unsigned long flags; - - spin_lock_irqsave(&info->lock, flags); - reset_device(info); - - for (i = 0; i < count; i++) { - write_reg(info, XAD1, patterns[i]); - write_reg(info, XAD2, patterns[(i + 1) % count]); - if ((read_reg(info, XAD1) != patterns[i]) || - (read_reg(info, XAD2) != patterns[(i + 1) % count])) { - rc = false; - break; - } - } - - spin_unlock_irqrestore(&info->lock, flags); - return rc; -} - -static bool irq_test(MGSLPC_INFO *info) -{ - unsigned long end_time; - unsigned long flags; - - spin_lock_irqsave(&info->lock, flags); - reset_device(info); - - info->testing_irq = true; - hdlc_mode(info); - - info->irq_occurred = false; - - /* init hdlc mode */ - - irq_enable(info, CHA, IRQ_TIMER); - write_reg(info, CHA + TIMR, 0); /* 512 cycles */ - issue_command(info, CHA, CMD_START_TIMER); - - spin_unlock_irqrestore(&info->lock, flags); - - end_time=100; - while(end_time-- && !info->irq_occurred) { - msleep_interruptible(10); - } - - info->testing_irq = false; - - spin_lock_irqsave(&info->lock, flags); - reset_device(info); - spin_unlock_irqrestore(&info->lock, flags); - - return info->irq_occurred; -} - -static int adapter_test(MGSLPC_INFO *info) -{ - if (!register_test(info)) { - info->init_error = DiagStatus_AddressFailure; - printk("%s(%d):Register test failure for device %s Addr=%04X\n", - __FILE__, __LINE__, info->device_name, (unsigned short)(info->io_base)); - return -ENODEV; - } - - if (!irq_test(info)) { - info->init_error = DiagStatus_IrqFailure; - printk("%s(%d):Interrupt test failure for device %s IRQ=%d\n", - __FILE__, __LINE__, info->device_name, (unsigned short)(info->irq_level)); - return -ENODEV; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):device %s passed diagnostics\n", - __FILE__, __LINE__, info->device_name); - return 0; -} - -static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit) -{ - int i; - int linecount; - if (xmit) - printk("%s tx data:\n", info->device_name); - else - printk("%s rx data:\n", info->device_name); - - while(count) { - if (count > 16) - linecount = 16; - else - linecount = count; - - for(i=0;i<linecount;i++) - printk("%02X ", (unsigned char)data[i]); - for(;i<17;i++) - printk(" "); - for(i=0;i<linecount;i++) { - if (data[i]>=040 && data[i]<=0176) - printk("%c", data[i]); - else - printk("."); - } - printk("\n"); - - data += linecount; - count -= linecount; - } -} - -/* HDLC frame time out - * update stats and do tx completion processing - */ -static void tx_timeout(struct timer_list *t) -{ - MGSLPC_INFO *info = from_timer(info, t, tx_timer); - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):tx_timeout(%s)\n", - __FILE__, __LINE__, info->device_name); - if (info->tx_active && - info->params.mode == MGSL_MODE_HDLC) { - info->icount.txtimeout++; - } - spin_lock_irqsave(&info->lock, flags); - info->tx_active = false; - info->tx_count = info->tx_put = info->tx_get = 0; - - spin_unlock_irqrestore(&info->lock, flags); - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_tx_done(info); - else -#endif - { - struct tty_struct *tty = tty_port_tty_get(&info->port); - bh_transmit(info, tty); - tty_kref_put(tty); - } -} - -#if SYNCLINK_GENERIC_HDLC - -/* - * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.) - * set encoding and frame check sequence (FCS) options - * - * dev pointer to network device structure - * encoding serial encoding setting - * parity FCS setting - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, - unsigned short parity) -{ - MGSLPC_INFO *info = dev_to_port(dev); - struct tty_struct *tty; - unsigned char new_encoding; - unsigned short new_crctype; - - /* return error if TTY interface open */ - if (info->port.count) - return -EBUSY; - - switch (encoding) - { - case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break; - case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break; - case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break; - case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break; - case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break; - default: return -EINVAL; - } - - switch (parity) - { - case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break; - case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break; - case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break; - default: return -EINVAL; - } - - info->params.encoding = new_encoding; - info->params.crc_type = new_crctype; - - /* if network interface up, reprogram hardware */ - if (info->netcount) { - tty = tty_port_tty_get(&info->port); - mgslpc_program_hw(info, tty); - tty_kref_put(tty); - } - - return 0; -} - -/* - * called by generic HDLC layer to send frame - * - * skb socket buffer containing HDLC frame - * dev pointer to network device structure - */ -static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - MGSLPC_INFO *info = dev_to_port(dev); - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk(KERN_INFO "%s:hdlc_xmit(%s)\n", __FILE__, dev->name); - - /* stop sending until this frame completes */ - netif_stop_queue(dev); - - /* copy data to device buffers */ - skb_copy_from_linear_data(skb, info->tx_buf, skb->len); - info->tx_get = 0; - info->tx_put = info->tx_count = skb->len; - - /* update network statistics */ - dev->stats.tx_packets++; - dev->stats.tx_bytes += skb->len; - - /* done with socket buffer, so free it */ - dev_kfree_skb(skb); - - /* save start time for transmit timeout detection */ - netif_trans_update(dev); - - /* start hardware transmitter if necessary */ - spin_lock_irqsave(&info->lock, flags); - if (!info->tx_active) { - struct tty_struct *tty = tty_port_tty_get(&info->port); - tx_start(info, tty); - tty_kref_put(tty); - } - spin_unlock_irqrestore(&info->lock, flags); - - return NETDEV_TX_OK; -} - -/* - * called by network layer when interface enabled - * claim resources and initialize hardware - * - * dev pointer to network device structure - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_open(struct net_device *dev) -{ - MGSLPC_INFO *info = dev_to_port(dev); - struct tty_struct *tty; - int rc; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s:hdlcdev_open(%s)\n", __FILE__, dev->name); - - /* generic HDLC layer open processing */ - rc = hdlc_open(dev); - if (rc != 0) - return rc; - - /* arbitrate between network and tty opens */ - spin_lock_irqsave(&info->netlock, flags); - if (info->port.count != 0 || info->netcount != 0) { - printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name); - spin_unlock_irqrestore(&info->netlock, flags); - return -EBUSY; - } - info->netcount=1; - spin_unlock_irqrestore(&info->netlock, flags); - - tty = tty_port_tty_get(&info->port); - /* claim resources and init adapter */ - rc = startup(info, tty); - if (rc != 0) { - tty_kref_put(tty); - spin_lock_irqsave(&info->netlock, flags); - info->netcount=0; - spin_unlock_irqrestore(&info->netlock, flags); - return rc; - } - /* assert RTS and DTR, apply hardware settings */ - info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR; - mgslpc_program_hw(info, tty); - tty_kref_put(tty); - - /* enable network layer transmit */ - netif_trans_update(dev); - netif_start_queue(dev); - - /* inform generic HDLC layer of current DCD status */ - spin_lock_irqsave(&info->lock, flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock, flags); - if (info->serial_signals & SerialSignal_DCD) - netif_carrier_on(dev); - else - netif_carrier_off(dev); - return 0; -} - -/* - * called by network layer when interface is disabled - * shutdown hardware and release resources - * - * dev pointer to network device structure - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_close(struct net_device *dev) -{ - MGSLPC_INFO *info = dev_to_port(dev); - struct tty_struct *tty = tty_port_tty_get(&info->port); - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s:hdlcdev_close(%s)\n", __FILE__, dev->name); - - netif_stop_queue(dev); - - /* shutdown adapter and release resources */ - shutdown(info, tty); - tty_kref_put(tty); - hdlc_close(dev); - - spin_lock_irqsave(&info->netlock, flags); - info->netcount=0; - spin_unlock_irqrestore(&info->netlock, flags); - - return 0; -} - -/* - * called by network layer to process IOCTL call to network device - * - * dev pointer to network device structure - * ifs pointer to network interface settings structure - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_wan_ioctl(struct net_device *dev, struct if_settings *ifs) -{ - const size_t size = sizeof(sync_serial_settings); - sync_serial_settings new_line; - sync_serial_settings __user *line = ifs->ifs_ifsu.sync; - MGSLPC_INFO *info = dev_to_port(dev); - unsigned int flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s:hdlcdev_ioctl(%s)\n", __FILE__, dev->name); - - /* return error if TTY interface open */ - if (info->port.count) - return -EBUSY; - - memset(&new_line, 0, size); - - switch (ifs->type) { - case IF_GET_IFACE: /* return current sync_serial_settings */ - - ifs->type = IF_IFACE_SYNC_SERIAL; - if (ifs->size < size) { - ifs->size = size; /* data size wanted */ - return -ENOBUFS; - } - - flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); - - switch (flags){ - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break; - case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break; - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break; - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break; - default: new_line.clock_type = CLOCK_DEFAULT; - } - - new_line.clock_rate = info->params.clock_speed; - new_line.loopback = info->params.loopback ? 1:0; - - if (copy_to_user(line, &new_line, size)) - return -EFAULT; - return 0; - - case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */ - - if(!capable(CAP_NET_ADMIN)) - return -EPERM; - if (copy_from_user(&new_line, line, size)) - return -EFAULT; - - switch (new_line.clock_type) - { - case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break; - case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break; - case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break; - case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break; - case CLOCK_DEFAULT: flags = info->params.flags & - (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break; - default: return -EINVAL; - } - - if (new_line.loopback != 0 && new_line.loopback != 1) - return -EINVAL; - - info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); - info->params.flags |= flags; - - info->params.loopback = new_line.loopback; - - if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG)) - info->params.clock_speed = new_line.clock_rate; - else - info->params.clock_speed = 0; - - /* if network interface up, reprogram hardware */ - if (info->netcount) { - struct tty_struct *tty = tty_port_tty_get(&info->port); - mgslpc_program_hw(info, tty); - tty_kref_put(tty); - } - return 0; - default: - return hdlc_ioctl(dev, ifs); - } -} - -/* - * called by network layer when transmit timeout is detected - * - * dev pointer to network device structure - */ -static void hdlcdev_tx_timeout(struct net_device *dev, unsigned int txqueue) -{ - MGSLPC_INFO *info = dev_to_port(dev); - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("hdlcdev_tx_timeout(%s)\n", dev->name); - - dev->stats.tx_errors++; - dev->stats.tx_aborted_errors++; - - spin_lock_irqsave(&info->lock, flags); - tx_stop(info); - spin_unlock_irqrestore(&info->lock, flags); - - netif_wake_queue(dev); -} - -/* - * called by device driver when transmit completes - * reenable network layer transmit if stopped - * - * info pointer to device instance information - */ -static void hdlcdev_tx_done(MGSLPC_INFO *info) -{ - if (netif_queue_stopped(info->netdev)) - netif_wake_queue(info->netdev); -} - -/* - * called by device driver when frame received - * pass frame to network layer - * - * info pointer to device instance information - * buf pointer to buffer contianing frame data - * size count of data bytes in buf - */ -static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size) -{ - struct sk_buff *skb = dev_alloc_skb(size); - struct net_device *dev = info->netdev; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("hdlcdev_rx(%s)\n", dev->name); - - if (skb == NULL) { - printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", dev->name); - dev->stats.rx_dropped++; - return; - } - - skb_put_data(skb, buf, size); - - skb->protocol = hdlc_type_trans(skb, dev); - - dev->stats.rx_packets++; - dev->stats.rx_bytes += size; - - netif_rx(skb); -} - -static const struct net_device_ops hdlcdev_ops = { - .ndo_open = hdlcdev_open, - .ndo_stop = hdlcdev_close, - .ndo_start_xmit = hdlc_start_xmit, - .ndo_siocwandev = hdlcdev_wan_ioctl, - .ndo_tx_timeout = hdlcdev_tx_timeout, -}; - -/* - * called by device driver when adding device instance - * do generic HDLC initialization - * - * info pointer to device instance information - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_init(MGSLPC_INFO *info) -{ - int rc; - struct net_device *dev; - hdlc_device *hdlc; - - /* allocate and initialize network and HDLC layer objects */ - - dev = alloc_hdlcdev(info); - if (dev == NULL) { - printk(KERN_ERR "%s:hdlc device allocation failure\n", __FILE__); - return -ENOMEM; - } - - /* for network layer reporting purposes only */ - dev->base_addr = info->io_base; - dev->irq = info->irq_level; - - /* network layer callbacks and settings */ - dev->netdev_ops = &hdlcdev_ops; - dev->watchdog_timeo = 10 * HZ; - dev->tx_queue_len = 50; - - /* generic HDLC layer callbacks and settings */ - hdlc = dev_to_hdlc(dev); - hdlc->attach = hdlcdev_attach; - hdlc->xmit = hdlcdev_xmit; - - /* register objects with HDLC layer */ - rc = register_hdlc_device(dev); - if (rc) { - printk(KERN_WARNING "%s:unable to register hdlc device\n", __FILE__); - free_netdev(dev); - return rc; - } - - info->netdev = dev; - return 0; -} - -/* - * called by device driver when removing device instance - * do generic HDLC cleanup - * - * info pointer to device instance information - */ -static void hdlcdev_exit(MGSLPC_INFO *info) -{ - unregister_hdlc_device(info->netdev); - free_netdev(info->netdev); - info->netdev = NULL; -} - -#endif /* CONFIG_HDLC */ - diff --git a/drivers/firmware/dmi-sysfs.c b/drivers/firmware/dmi-sysfs.c index ed5aff0a4204..03708ab64e56 100644 --- a/drivers/firmware/dmi-sysfs.c +++ b/drivers/firmware/dmi-sysfs.c @@ -304,7 +304,7 @@ static struct attribute *dmi_sysfs_sel_attrs[] = { }; ATTRIBUTE_GROUPS(dmi_sysfs_sel); -static struct kobj_type dmi_system_event_log_ktype = { +static const struct kobj_type dmi_system_event_log_ktype = { .release = dmi_entry_free, .sysfs_ops = &dmi_sysfs_specialize_attr_ops, .default_groups = dmi_sysfs_sel_groups, @@ -563,7 +563,7 @@ static void dmi_sysfs_entry_release(struct kobject *kobj) kfree(entry); } -static struct kobj_type dmi_sysfs_entry_ktype = { +static const struct kobj_type dmi_sysfs_entry_ktype = { .release = dmi_sysfs_entry_release, .sysfs_ops = &dmi_sysfs_attr_ops, .default_groups = dmi_sysfs_entry_groups, diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c index 5cc238916551..55dec4eb2c00 100644 --- a/drivers/firmware/edd.c +++ b/drivers/firmware/edd.c @@ -608,7 +608,7 @@ static void edd_release(struct kobject * kobj) kfree(dev); } -static struct kobj_type edd_ktype = { +static const struct kobj_type edd_ktype = { .release = edd_release, .sysfs_ops = &edd_attr_ops, }; diff --git a/drivers/firmware/stratix10-svc.c b/drivers/firmware/stratix10-svc.c index bde1f543f529..80f4e2d14e04 100644 --- a/drivers/firmware/stratix10-svc.c +++ b/drivers/firmware/stratix10-svc.c @@ -1133,8 +1133,8 @@ static int stratix10_svc_drv_probe(struct platform_device *pdev) return ret; genpool = svc_create_memory_pool(pdev, sh_memory); - if (!genpool) - return -ENOMEM; + if (IS_ERR(genpool)) + return PTR_ERR(genpool); /* allocate service controller and supporting channel */ controller = devm_kzalloc(dev, sizeof(*controller), GFP_KERNEL); diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c index ce86a1850305..a736db4a5825 100644 --- a/drivers/firmware/xilinx/zynqmp.c +++ b/drivers/firmware/xilinx/zynqmp.c @@ -972,6 +972,39 @@ int zynqmp_pm_fpga_get_status(u32 *value) EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_get_status); /** + * zynqmp_pm_fpga_get_config_status - Get the FPGA configuration status. + * @value: Buffer to store FPGA configuration status. + * + * This function provides access to the pmufw to get the FPGA configuration + * status + * + * Return: 0 on success, a negative value on error + */ +int zynqmp_pm_fpga_get_config_status(u32 *value) +{ + u32 ret_payload[PAYLOAD_ARG_CNT]; + u32 buf, lower_addr, upper_addr; + int ret; + + if (!value) + return -EINVAL; + + lower_addr = lower_32_bits((u64)&buf); + upper_addr = upper_32_bits((u64)&buf); + + ret = zynqmp_pm_invoke_fn(PM_FPGA_READ, + XILINX_ZYNQMP_PM_FPGA_CONFIG_STAT_OFFSET, + lower_addr, upper_addr, + XILINX_ZYNQMP_PM_FPGA_READ_CONFIG_REG, + ret_payload); + + *value = ret_payload[1]; + + return ret; +} +EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_get_config_status); + +/** * zynqmp_pm_pinctrl_request - Request Pin from firmware * @pin: Pin number to request * diff --git a/drivers/fpga/fpga-bridge.c b/drivers/fpga/fpga-bridge.c index c41b3f2360a8..a6c25dee9cc1 100644 --- a/drivers/fpga/fpga-bridge.c +++ b/drivers/fpga/fpga-bridge.c @@ -115,7 +115,7 @@ static int fpga_bridge_dev_match(struct device *dev, const void *data) /** * fpga_bridge_get - get an exclusive reference to an fpga bridge * @dev: parent device that fpga bridge was registered with - * @info: fpga manager info + * @info: fpga image specific information * * Given a device, get an exclusive reference to an fpga bridge. * diff --git a/drivers/fpga/zynqmp-fpga.c b/drivers/fpga/zynqmp-fpga.c index c60f20949c47..f3434e2c487b 100644 --- a/drivers/fpga/zynqmp-fpga.c +++ b/drivers/fpga/zynqmp-fpga.c @@ -77,6 +77,26 @@ static enum fpga_mgr_states zynqmp_fpga_ops_state(struct fpga_manager *mgr) return FPGA_MGR_STATE_UNKNOWN; } +static ssize_t status_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u32 status; + int ret; + + ret = zynqmp_pm_fpga_get_config_status(&status); + if (ret) + return ret; + + return sysfs_emit(buf, "0x%x\n", status); +} +static DEVICE_ATTR_RO(status); + +static struct attribute *zynqmp_fpga_attrs[] = { + &dev_attr_status.attr, + NULL, +}; +ATTRIBUTE_GROUPS(zynqmp_fpga); + static const struct fpga_manager_ops zynqmp_fpga_ops = { .state = zynqmp_fpga_ops_state, .write_init = zynqmp_fpga_ops_write_init, @@ -113,6 +133,7 @@ static struct platform_driver zynqmp_fpga_driver = { .driver = { .name = "zynqmp_fpga_manager", .of_match_table = of_match_ptr(zynqmp_fpga_of_match), + .dev_groups = zynqmp_fpga_groups, }, }; diff --git a/drivers/gpu/drm/drm_mipi_dsi.c b/drivers/gpu/drm/drm_mipi_dsi.c index 7900a4707d7c..295382cd09b0 100644 --- a/drivers/gpu/drm/drm_mipi_dsi.c +++ b/drivers/gpu/drm/drm_mipi_dsi.c @@ -160,7 +160,7 @@ of_mipi_dsi_device_add(struct mipi_dsi_host *host, struct device_node *node) int ret; u32 reg; - if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) { + if (of_alias_from_compatible(node, info.type, sizeof(info.type)) < 0) { drm_err(host, "modalias failure on %pOF\n", node); return ERR_PTR(-EINVAL); } diff --git a/drivers/hsi/hsi_core.c b/drivers/hsi/hsi_core.c index 8fda8f1d064d..acbf82f755a8 100644 --- a/drivers/hsi/hsi_core.c +++ b/drivers/hsi/hsi_core.c @@ -207,7 +207,7 @@ static void hsi_add_client_from_dt(struct hsi_port *port, if (!cl) return; - err = of_modalias_node(client, name, sizeof(name)); + err = of_alias_from_compatible(client, name, sizeof(name)); if (err) goto err; diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c index a48c97da8165..711f451b6946 100644 --- a/drivers/hwtracing/coresight/coresight-etm-perf.c +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c @@ -901,6 +901,7 @@ int __init etm_perf_init(void) etm_pmu.addr_filters_sync = etm_addr_filters_sync; etm_pmu.addr_filters_validate = etm_addr_filters_validate; etm_pmu.nr_addr_filters = ETM_ADDR_CMP_MAX; + etm_pmu.module = THIS_MODULE; ret = perf_pmu_register(&etm_pmu, CORESIGHT_ETM_PMU_NAME, -1); if (ret == 0) diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c index 2e74747eec9c..ec706a3aba26 100644 --- a/drivers/i2c/busses/i2c-powermac.c +++ b/drivers/i2c/busses/i2c-powermac.c @@ -284,7 +284,7 @@ static bool i2c_powermac_get_type(struct i2c_adapter *adap, */ /* First try proper modalias */ - if (of_modalias_node(node, tmp, sizeof(tmp)) >= 0) { + if (of_alias_from_compatible(node, tmp, sizeof(tmp)) >= 0) { snprintf(type, type_size, "MAC,%s", tmp); return true; } diff --git a/drivers/i2c/i2c-core-of.c b/drivers/i2c/i2c-core-of.c index 5c1376386897..a6c407d36800 100644 --- a/drivers/i2c/i2c-core-of.c +++ b/drivers/i2c/i2c-core-of.c @@ -27,7 +27,7 @@ int of_i2c_get_board_info(struct device *dev, struct device_node *node, memset(info, 0, sizeof(*info)); - if (of_modalias_node(node, info->type, sizeof(info->type)) < 0) { + if (of_alias_from_compatible(node, info->type, sizeof(info->type)) < 0) { dev_err(dev, "of_i2c: modalias failure on %pOF\n", node); return -EINVAL; } diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig index b190846c3dc2..52eb46ef84c1 100644 --- a/drivers/iio/Kconfig +++ b/drivers/iio/Kconfig @@ -30,6 +30,9 @@ config IIO_CONFIGFS (e.g. software triggers). For more info see Documentation/iio/iio_configfs.rst. +config IIO_GTS_HELPER + tristate + config IIO_TRIGGER bool "Enable triggered sampling support" help diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile index 3be08cdadd7e..9622347a1c1b 100644 --- a/drivers/iio/Makefile +++ b/drivers/iio/Makefile @@ -9,6 +9,7 @@ industrialio-$(CONFIG_IIO_BUFFER) += industrialio-buffer.o industrialio-$(CONFIG_IIO_TRIGGER) += industrialio-trigger.o obj-$(CONFIG_IIO_CONFIGFS) += industrialio-configfs.o +obj-$(CONFIG_IIO_GTS_HELPER) += industrialio-gts-helper.o obj-$(CONFIG_IIO_SW_DEVICE) += industrialio-sw-device.o obj-$(CONFIG_IIO_SW_TRIGGER) += industrialio-sw-trigger.o obj-$(CONFIG_IIO_TRIGGERED_EVENT) += industrialio-triggered-event.o diff --git a/drivers/iio/accel/bma400_core.c b/drivers/iio/accel/bma400_core.c index 623f37cbaf50..a68b845f5b4f 100644 --- a/drivers/iio/accel/bma400_core.c +++ b/drivers/iio/accel/bma400_core.c @@ -1688,7 +1688,7 @@ static irqreturn_t bma400_interrupt(int irq, void *private) if (FIELD_GET(BMA400_INT_DRDY_MSK, le16_to_cpu(data->status))) { mutex_unlock(&data->mutex); - iio_trigger_poll_chained(data->trig); + iio_trigger_poll_nested(data->trig); return IRQ_HANDLED; } diff --git a/drivers/iio/accel/kionix-kx022a.c b/drivers/iio/accel/kionix-kx022a.c index 1c3a72380fb8..f98393d74666 100644 --- a/drivers/iio/accel/kionix-kx022a.c +++ b/drivers/iio/accel/kionix-kx022a.c @@ -162,7 +162,6 @@ struct kx022a_data { int inc_reg; int ien_reg; - unsigned int g_range; unsigned int state; unsigned int odr_ns; @@ -900,7 +899,7 @@ static irqreturn_t kx022a_irq_thread_handler(int irq, void *private) mutex_lock(&data->mutex); if (data->trigger_enabled) { - iio_trigger_poll_chained(data->trig); + iio_trigger_poll_nested(data->trig); ret = IRQ_HANDLED; } diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c index f97fb68e3a71..ea14e3aaa30a 100644 --- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -1067,7 +1067,7 @@ static irqreturn_t mma8452_interrupt(int irq, void *p) return IRQ_NONE; if (src & MMA8452_INT_DRDY) { - iio_trigger_poll_chained(indio_dev->trig); + iio_trigger_poll_nested(indio_dev->trig); ret = IRQ_HANDLED; } diff --git a/drivers/iio/accel/msa311.c b/drivers/iio/accel/msa311.c index af94d3adf6d8..6690fa37da8f 100644 --- a/drivers/iio/accel/msa311.c +++ b/drivers/iio/accel/msa311.c @@ -951,7 +951,7 @@ static irqreturn_t msa311_irq_thread(int irq, void *p) } if (new_data_int_enabled) - iio_trigger_poll_chained(msa311->new_data_trig); + iio_trigger_poll_nested(msa311->new_data_trig); return IRQ_HANDLED; } diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h index 56ed0c776d4a..e7525615712b 100644 --- a/drivers/iio/accel/st_accel.h +++ b/drivers/iio/accel/st_accel.h @@ -39,6 +39,7 @@ #define LIS302DL_ACCEL_DEV_NAME "lis302dl" #define LSM303C_ACCEL_DEV_NAME "lsm303c_accel" #define SC7A20_ACCEL_DEV_NAME "sc7a20" +#define IIS328DQ_ACCEL_DEV_NAME "iis328dq" #ifdef CONFIG_IIO_BUFFER diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index 6b8562f684d5..5f7d81b44b1d 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -517,6 +517,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, .sensors_supported = { [0] = H3LIS331DL_ACCEL_DEV_NAME, + [1] = IIS328DQ_ACCEL_DEV_NAME, }, .ch = (struct iio_chan_spec *)st_accel_12bit_channels, .odr = { diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c index 3f02fd5d5946..fb9e2d6f4210 100644 --- a/drivers/iio/accel/st_accel_i2c.c +++ b/drivers/iio/accel/st_accel_i2c.c @@ -119,6 +119,10 @@ static const struct of_device_id st_accel_of_match[] = { .compatible = "silan,sc7a20", .data = SC7A20_ACCEL_DEV_NAME, }, + { + .compatible = "st,iis328dq", + .data = IIS328DQ_ACCEL_DEV_NAME, + }, {}, }; MODULE_DEVICE_TABLE(of, st_accel_of_match); @@ -157,6 +161,7 @@ static const struct i2c_device_id st_accel_id_table[] = { { LIS302DL_ACCEL_DEV_NAME }, { LSM303C_ACCEL_DEV_NAME }, { SC7A20_ACCEL_DEV_NAME }, + { IIS328DQ_ACCEL_DEV_NAME }, {}, }; MODULE_DEVICE_TABLE(i2c, st_accel_id_table); diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c index 5740dc1820bd..f72a24f45322 100644 --- a/drivers/iio/accel/st_accel_spi.c +++ b/drivers/iio/accel/st_accel_spi.c @@ -100,6 +100,10 @@ static const struct of_device_id st_accel_of_match[] = { .compatible = "st,lsm303c-accel", .data = LSM303C_ACCEL_DEV_NAME, }, + { + .compatible = "st,iis328dq", + .data = IIS328DQ_ACCEL_DEV_NAME, + }, {} }; MODULE_DEVICE_TABLE(of, st_accel_of_match); @@ -157,6 +161,7 @@ static const struct spi_device_id st_accel_id_table[] = { { LIS3DE_ACCEL_DEV_NAME }, { LIS302DL_ACCEL_DEV_NAME }, { LSM303C_ACCEL_DEV_NAME }, + { IIS328DQ_ACCEL_DEV_NAME }, {}, }; MODULE_DEVICE_TABLE(spi, st_accel_id_table); diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 45af2302be53..eb2b09ef5d5b 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -1229,6 +1229,16 @@ config TI_ADS7924 This driver can also be built as a module. If so, the module will be called ti-ads7924. +config TI_ADS1100 + tristate "Texas Instruments ADS1100 and ADS1000 ADC" + depends on I2C + help + If you say yes here you get support for Texas Instruments ADS1100 and + ADS1000 ADC chips. + + This driver can also be built as a module. If so, the module will be + called ti-ads1100. + config TI_ADS7950 tristate "Texas Instruments ADS7950 ADC driver" depends on SPI && GPIOLIB diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 36c18177322a..e07e4a3e6237 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -108,6 +108,7 @@ obj-$(CONFIG_TI_ADC108S102) += ti-adc108s102.o obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o +obj-$(CONFIG_TI_ADS1100) += ti-ads1100.o obj-$(CONFIG_TI_ADS7924) += ti-ads7924.o obj-$(CONFIG_TI_ADS7950) += ti-ads7950.o obj-$(CONFIG_TI_ADS8344) += ti-ads8344.o diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c index dd6b603f65ea..1928d9ae5bcf 100644 --- a/drivers/iio/adc/ad7606.c +++ b/drivers/iio/adc/ad7606.c @@ -477,7 +477,7 @@ static irqreturn_t ad7606_interrupt(int irq, void *dev_id) if (iio_buffer_enabled(indio_dev)) { gpiod_set_value(st->gpio_convst, 0); - iio_trigger_poll_chained(st->trig); + iio_trigger_poll_nested(st->trig); } else { complete(&st->completion); } diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c index 7258912fe17b..df67b63ccf69 100644 --- a/drivers/iio/adc/at91-sama5d2_adc.c +++ b/drivers/iio/adc/at91-sama5d2_adc.c @@ -1194,7 +1194,7 @@ static void at91_dma_buffer_done(void *data) { struct iio_dev *indio_dev = data; - iio_trigger_poll_chained(indio_dev->trig); + iio_trigger_poll_nested(indio_dev->trig); } static int at91_adc_dma_start(struct iio_dev *indio_dev) @@ -2400,12 +2400,8 @@ static int at91_adc_probe(struct platform_device *pdev) st->dma_st.phys_addr = res->start; st->irq = platform_get_irq(pdev, 0); - if (st->irq <= 0) { - if (!st->irq) - st->irq = -ENXIO; - + if (st->irq < 0) return st->irq; - } st->per_clk = devm_clk_get(&pdev->dev, "adc_clk"); if (IS_ERR(st->per_clk)) diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c index 53bf7d4899d2..75bda94dbce1 100644 --- a/drivers/iio/adc/axp20x_adc.c +++ b/drivers/iio/adc/axp20x_adc.c @@ -5,6 +5,7 @@ * Quentin Schulz <quentin.schulz@free-electrons.com> */ +#include <linux/bitfield.h> #include <linux/completion.h> #include <linux/interrupt.h> #include <linux/io.h> @@ -22,20 +23,20 @@ #include <linux/mfd/axp20x.h> #define AXP20X_ADC_EN1_MASK GENMASK(7, 0) - #define AXP20X_ADC_EN2_MASK (GENMASK(3, 2) | BIT(7)) + #define AXP22X_ADC_EN1_MASK (GENMASK(7, 5) | BIT(0)) #define AXP20X_GPIO10_IN_RANGE_GPIO0 BIT(0) #define AXP20X_GPIO10_IN_RANGE_GPIO1 BIT(1) -#define AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(x) ((x) & BIT(0)) -#define AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(x) (((x) & BIT(0)) << 1) #define AXP20X_ADC_RATE_MASK GENMASK(7, 6) -#define AXP813_V_I_ADC_RATE_MASK GENMASK(5, 4) -#define AXP813_ADC_RATE_MASK (AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK) #define AXP20X_ADC_RATE_HZ(x) ((ilog2((x) / 25) << 6) & AXP20X_ADC_RATE_MASK) + #define AXP22X_ADC_RATE_HZ(x) ((ilog2((x) / 100) << 6) & AXP20X_ADC_RATE_MASK) + +#define AXP813_V_I_ADC_RATE_MASK GENMASK(5, 4) +#define AXP813_ADC_RATE_MASK (AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK) #define AXP813_TS_GPIO0_ADC_RATE_HZ(x) AXP20X_ADC_RATE_HZ(x) #define AXP813_V_I_ADC_RATE_HZ(x) ((ilog2((x) / 100) << 4) & AXP813_V_I_ADC_RATE_MASK) #define AXP813_ADC_RATE_HZ(x) (AXP20X_ADC_RATE_HZ(x) | AXP813_V_I_ADC_RATE_HZ(x)) @@ -234,7 +235,7 @@ static int axp20x_adc_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val) { struct axp20x_adc_iio *info = iio_priv(indio_dev); - int size = 12; + int ret, size; /* * N.B.: Unlike the Chinese datasheets tell, the charging current is @@ -246,10 +247,11 @@ static int axp20x_adc_raw(struct iio_dev *indio_dev, else size = 12; - *val = axp20x_read_variable_width(info->regmap, chan->address, size); - if (*val < 0) - return *val; + ret = axp20x_read_variable_width(info->regmap, chan->address, size); + if (ret < 0) + return ret; + *val = ret; return IIO_VAL_INT; } @@ -257,11 +259,13 @@ static int axp22x_adc_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val) { struct axp20x_adc_iio *info = iio_priv(indio_dev); + int ret; - *val = axp20x_read_variable_width(info->regmap, chan->address, 12); - if (*val < 0) - return *val; + ret = axp20x_read_variable_width(info->regmap, chan->address, 12); + if (ret < 0) + return ret; + *val = ret; return IIO_VAL_INT; } @@ -269,11 +273,13 @@ static int axp813_adc_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val) { struct axp20x_adc_iio *info = iio_priv(indio_dev); + int ret; - *val = axp20x_read_variable_width(info->regmap, chan->address, 12); - if (*val < 0) - return *val; + ret = axp20x_read_variable_width(info->regmap, chan->address, 12); + if (ret < 0) + return ret; + *val = ret; return IIO_VAL_INT; } @@ -443,27 +449,27 @@ static int axp20x_adc_offset_voltage(struct iio_dev *indio_dev, int channel, int *val) { struct axp20x_adc_iio *info = iio_priv(indio_dev); + unsigned int regval; int ret; - ret = regmap_read(info->regmap, AXP20X_GPIO10_IN_RANGE, val); + ret = regmap_read(info->regmap, AXP20X_GPIO10_IN_RANGE, ®val); if (ret < 0) return ret; switch (channel) { case AXP20X_GPIO0_V: - *val &= AXP20X_GPIO10_IN_RANGE_GPIO0; + regval = FIELD_GET(AXP20X_GPIO10_IN_RANGE_GPIO0, regval); break; case AXP20X_GPIO1_V: - *val &= AXP20X_GPIO10_IN_RANGE_GPIO1; + regval = FIELD_GET(AXP20X_GPIO10_IN_RANGE_GPIO1, regval); break; default: return -EINVAL; } - *val = *val ? 700000 : 0; - + *val = regval ? 700000 : 0; return IIO_VAL_INT; } @@ -548,7 +554,7 @@ static int axp20x_write_raw(struct iio_dev *indio_dev, long mask) { struct axp20x_adc_iio *info = iio_priv(indio_dev); - unsigned int reg, regval; + unsigned int regmask, regval; /* * The AXP20X PMIC allows the user to choose between 0V and 0.7V offsets @@ -560,25 +566,22 @@ static int axp20x_write_raw(struct iio_dev *indio_dev, if (val != 0 && val != 700000) return -EINVAL; - val = val ? 1 : 0; - switch (chan->channel) { case AXP20X_GPIO0_V: - reg = AXP20X_GPIO10_IN_RANGE_GPIO0; - regval = AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(val); + regmask = AXP20X_GPIO10_IN_RANGE_GPIO0; + regval = FIELD_PREP(AXP20X_GPIO10_IN_RANGE_GPIO0, !!val); break; case AXP20X_GPIO1_V: - reg = AXP20X_GPIO10_IN_RANGE_GPIO1; - regval = AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(val); + regmask = AXP20X_GPIO10_IN_RANGE_GPIO1; + regval = FIELD_PREP(AXP20X_GPIO10_IN_RANGE_GPIO1, !!val); break; default: return -EINVAL; } - return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE, reg, - regval); + return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE, regmask, regval); } static const struct iio_info axp20x_adc_iio_info = { @@ -620,9 +623,9 @@ struct axp_data { int num_channels; struct iio_chan_spec const *channels; unsigned long adc_en1_mask; + unsigned long adc_en2_mask; int (*adc_rate)(struct axp20x_adc_iio *info, int rate); - bool adc_en2; struct iio_map *maps; }; @@ -631,8 +634,8 @@ static const struct axp_data axp20x_data = { .num_channels = ARRAY_SIZE(axp20x_adc_channels), .channels = axp20x_adc_channels, .adc_en1_mask = AXP20X_ADC_EN1_MASK, + .adc_en2_mask = AXP20X_ADC_EN2_MASK, .adc_rate = axp20x_adc_rate, - .adc_en2 = true, .maps = axp20x_maps, }; @@ -642,7 +645,6 @@ static const struct axp_data axp22x_data = { .channels = axp22x_adc_channels, .adc_en1_mask = AXP22X_ADC_EN1_MASK, .adc_rate = axp22x_adc_rate, - .adc_en2 = false, .maps = axp22x_maps, }; @@ -652,7 +654,6 @@ static const struct axp_data axp813_data = { .channels = axp813_adc_channels, .adc_en1_mask = AXP22X_ADC_EN1_MASK, .adc_rate = axp813_adc_rate, - .adc_en2 = false, .maps = axp22x_maps, }; @@ -710,10 +711,10 @@ static int axp20x_probe(struct platform_device *pdev) /* Enable the ADCs on IP */ regmap_write(info->regmap, AXP20X_ADC_EN1, info->data->adc_en1_mask); - if (info->data->adc_en2) - /* Enable GPIO0/1 and internal temperature ADCs */ + if (info->data->adc_en2_mask) regmap_update_bits(info->regmap, AXP20X_ADC_EN2, - AXP20X_ADC_EN2_MASK, AXP20X_ADC_EN2_MASK); + info->data->adc_en2_mask, + info->data->adc_en2_mask); /* Configure ADCs rate */ info->data->adc_rate(info, 100); @@ -738,7 +739,7 @@ fail_register: fail_map: regmap_write(info->regmap, AXP20X_ADC_EN1, 0); - if (info->data->adc_en2) + if (info->data->adc_en2_mask) regmap_write(info->regmap, AXP20X_ADC_EN2, 0); return ret; @@ -754,7 +755,7 @@ static int axp20x_remove(struct platform_device *pdev) regmap_write(info->regmap, AXP20X_ADC_EN1, 0); - if (info->data->adc_en2) + if (info->data->adc_en2_mask) regmap_write(info->regmap, AXP20X_ADC_EN2, 0); return 0; diff --git a/drivers/iio/adc/max11410.c b/drivers/iio/adc/max11410.c index f6895bc9fc4b..6af829349b4e 100644 --- a/drivers/iio/adc/max11410.c +++ b/drivers/iio/adc/max11410.c @@ -682,7 +682,7 @@ static irqreturn_t max11410_interrupt(int irq, void *dev_id) struct max11410_state *st = iio_priv(indio_dev); if (iio_buffer_enabled(indio_dev)) - iio_trigger_poll_chained(st->trig); + iio_trigger_poll_nested(st->trig); else complete(&st->completion); diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c index 85b6826cc10c..18937a262af6 100644 --- a/drivers/iio/adc/meson_saradc.c +++ b/drivers/iio/adc/meson_saradc.c @@ -957,14 +957,18 @@ err_lock: return ret; } -static int meson_sar_adc_hw_disable(struct iio_dev *indio_dev) +static void meson_sar_adc_hw_disable(struct iio_dev *indio_dev) { struct meson_sar_adc_priv *priv = iio_priv(indio_dev); int ret; + /* + * If taking the lock fails we have to assume that BL30 is broken. The + * best we can do then is to release the resources anyhow. + */ ret = meson_sar_adc_lock(indio_dev); if (ret) - return ret; + dev_err(indio_dev->dev.parent, "Failed to lock ADC (%pE)\n", ERR_PTR(ret)); clk_disable_unprepare(priv->adc_clk); @@ -977,9 +981,8 @@ static int meson_sar_adc_hw_disable(struct iio_dev *indio_dev) regulator_disable(priv->vref); - meson_sar_adc_unlock(indio_dev); - - return 0; + if (!ret) + meson_sar_adc_unlock(indio_dev); } static irqreturn_t meson_sar_adc_irq(int irq, void *data) @@ -1283,14 +1286,18 @@ static int meson_sar_adc_remove(struct platform_device *pdev) iio_device_unregister(indio_dev); - return meson_sar_adc_hw_disable(indio_dev); + meson_sar_adc_hw_disable(indio_dev); + + return 0; } static int meson_sar_adc_suspend(struct device *dev) { struct iio_dev *indio_dev = dev_get_drvdata(dev); - return meson_sar_adc_hw_disable(indio_dev); + meson_sar_adc_hw_disable(indio_dev); + + return 0; } static int meson_sar_adc_resume(struct device *dev) diff --git a/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c index 849a697a467e..c1c439215aeb 100644 --- a/drivers/iio/adc/palmas_gpadc.c +++ b/drivers/iio/adc/palmas_gpadc.c @@ -20,6 +20,7 @@ #include <linux/completion.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/iio/events.h> #include <linux/iio/iio.h> #include <linux/iio/machine.h> #include <linux/iio/driver.h> @@ -76,6 +77,17 @@ static struct palmas_gpadc_info palmas_gpadc_info[] = { PALMAS_ADC_INFO(IN15, 0, 0, 0, 0, INVALID, INVALID, true), }; +struct palmas_adc_event { + bool enabled; + int channel; + enum iio_event_direction direction; +}; + +struct palmas_gpadc_thresholds { + int high; + int low; +}; + /* * struct palmas_gpadc - the palmas_gpadc structure * @ch0_current: channel 0 current source setting @@ -111,14 +123,33 @@ struct palmas_gpadc { int irq_auto_1; struct palmas_gpadc_info *adc_info; struct completion conv_completion; - struct palmas_adc_wakeup_property wakeup1_data; - struct palmas_adc_wakeup_property wakeup2_data; - bool wakeup1_enable; - bool wakeup2_enable; + struct palmas_adc_event event0; + struct palmas_adc_event event1; + struct palmas_gpadc_thresholds thresholds[PALMAS_ADC_CH_MAX]; int auto_conversion_period; struct mutex lock; }; +static struct palmas_adc_event *palmas_gpadc_get_event(struct palmas_gpadc *adc, + int adc_chan, + enum iio_event_direction dir) +{ + if (adc_chan == adc->event0.channel && dir == adc->event0.direction) + return &adc->event0; + + if (adc_chan == adc->event1.channel && dir == adc->event1.direction) + return &adc->event1; + + return NULL; +} + +static bool palmas_gpadc_channel_is_freerunning(struct palmas_gpadc *adc, + int adc_chan) +{ + return palmas_gpadc_get_event(adc, adc_chan, IIO_EV_DIR_RISING) || + palmas_gpadc_get_event(adc, adc_chan, IIO_EV_DIR_FALLING); +} + /* * GPADC lock issue in AUTO mode. * Impact: In AUTO mode, GPADC conversion can be locked after disabling AUTO @@ -188,11 +219,24 @@ static irqreturn_t palmas_gpadc_irq(int irq, void *data) static irqreturn_t palmas_gpadc_irq_auto(int irq, void *data) { - struct palmas_gpadc *adc = data; + struct iio_dev *indio_dev = data; + struct palmas_gpadc *adc = iio_priv(indio_dev); + struct palmas_adc_event *ev; dev_dbg(adc->dev, "Threshold interrupt %d occurs\n", irq); palmas_disable_auto_conversion(adc); + ev = (irq == adc->irq_auto_0) ? &adc->event0 : &adc->event1; + if (ev->channel != -1) { + enum iio_event_direction dir; + u64 code; + + dir = ev->direction; + code = IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, ev->channel, + IIO_EV_TYPE_THRESH, dir); + iio_push_event(indio_dev, code, iio_get_time_ns(indio_dev)); + } + return IRQ_HANDLED; } @@ -280,6 +324,9 @@ static int palmas_gpadc_read_prepare(struct palmas_gpadc *adc, int adc_chan) { int ret; + if (palmas_gpadc_channel_is_freerunning(adc, adc_chan)) + return 0; /* ADC already running */ + ret = palmas_gpadc_enable(adc, adc_chan, true); if (ret < 0) return ret; @@ -339,28 +386,43 @@ static int palmas_gpadc_start_conversion(struct palmas_gpadc *adc, int adc_chan) unsigned int val; int ret; - init_completion(&adc->conv_completion); - ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE, - PALMAS_GPADC_SW_SELECT, - PALMAS_GPADC_SW_SELECT_SW_START_CONV0, - PALMAS_GPADC_SW_SELECT_SW_START_CONV0); - if (ret < 0) { - dev_err(adc->dev, "SELECT_SW_START write failed: %d\n", ret); - return ret; - } + if (palmas_gpadc_channel_is_freerunning(adc, adc_chan)) { + int event = (adc_chan == adc->event0.channel) ? 0 : 1; + unsigned int reg = (event == 0) ? + PALMAS_GPADC_AUTO_CONV0_LSB : + PALMAS_GPADC_AUTO_CONV1_LSB; - ret = wait_for_completion_timeout(&adc->conv_completion, - PALMAS_ADC_CONVERSION_TIMEOUT); - if (ret == 0) { - dev_err(adc->dev, "conversion not completed\n"); - return -ETIMEDOUT; - } + ret = palmas_bulk_read(adc->palmas, PALMAS_GPADC_BASE, + reg, &val, 2); + if (ret < 0) { + dev_err(adc->dev, "AUTO_CONV%x_LSB read failed: %d\n", + event, ret); + return ret; + } + } else { + init_completion(&adc->conv_completion); + ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE, + PALMAS_GPADC_SW_SELECT, + PALMAS_GPADC_SW_SELECT_SW_START_CONV0, + PALMAS_GPADC_SW_SELECT_SW_START_CONV0); + if (ret < 0) { + dev_err(adc->dev, "SELECT_SW_START write failed: %d\n", ret); + return ret; + } - ret = palmas_bulk_read(adc->palmas, PALMAS_GPADC_BASE, - PALMAS_GPADC_SW_CONV0_LSB, &val, 2); - if (ret < 0) { - dev_err(adc->dev, "SW_CONV0_LSB read failed: %d\n", ret); - return ret; + ret = wait_for_completion_timeout(&adc->conv_completion, + PALMAS_ADC_CONVERSION_TIMEOUT); + if (ret == 0) { + dev_err(adc->dev, "conversion not completed\n"); + return -ETIMEDOUT; + } + + ret = palmas_bulk_read(adc->palmas, PALMAS_GPADC_BASE, + PALMAS_GPADC_SW_CONV0_LSB, &val, 2); + if (ret < 0) { + dev_err(adc->dev, "SW_CONV0_LSB read failed: %d\n", ret); + return ret; + } } ret = val & 0xFFF; @@ -386,6 +448,98 @@ static int palmas_gpadc_get_calibrated_code(struct palmas_gpadc *adc, return val; } +/* + * The high and low threshold values are calculated based on the advice given + * in TI Application Report SLIA087A, "Guide to Using the GPADC in PS65903x, + * TPS65917-Q1, TPS65919-Q1, and TPS65916 Devices". This document recommend + * taking ADC tolerances into account and is based on the device integral non- + * linearity (INL), offset error and gain error: + * + * raw high threshold = (ideal threshold + INL) * gain error + offset error + * + * The gain error include both gain error, as specified in the datasheet, and + * the gain error drift. These paramenters vary depending on device and whether + * the the channel is calibrated (trimmed) or not. + */ +static int palmas_gpadc_threshold_with_tolerance(int val, const int INL, + const int gain_error, + const int offset_error) +{ + val = ((val + INL) * (1000 + gain_error)) / 1000 + offset_error; + + return clamp(val, 0, 0xFFF); +} + +/* + * The values below are taken from the datasheet of TWL6035, TWL6037. + * todo: get max INL, gain error, and offset error from OF. + */ +static int palmas_gpadc_get_high_threshold_raw(struct palmas_gpadc *adc, + struct palmas_adc_event *ev) +{ + const int adc_chan = ev->channel; + int val = adc->thresholds[adc_chan].high; + /* integral nonlinearity, measured in LSB */ + const int max_INL = 2; + /* measured in LSB */ + int max_offset_error; + /* 0.2% when calibrated */ + int max_gain_error = 2; + + val = (val * 1000) / adc->adc_info[adc_chan].gain; + + if (adc->adc_info[adc_chan].is_uncalibrated) { + /* 2% worse */ + max_gain_error += 20; + max_offset_error = 36; + } else { + val = (val * adc->adc_info[adc_chan].gain_error + + adc->adc_info[adc_chan].offset) / + 1000; + max_offset_error = 2; + } + + return palmas_gpadc_threshold_with_tolerance(val, + max_INL, + max_gain_error, + max_offset_error); +} + +/* + * The values below are taken from the datasheet of TWL6035, TWL6037. + * todo: get min INL, gain error, and offset error from OF. + */ +static int palmas_gpadc_get_low_threshold_raw(struct palmas_gpadc *adc, + struct palmas_adc_event *ev) +{ + const int adc_chan = ev->channel; + int val = adc->thresholds[adc_chan].low; + /* integral nonlinearity, measured in LSB */ + const int min_INL = -2; + /* measured in LSB */ + int min_offset_error; + /* -0.6% when calibrated */ + int min_gain_error = -6; + + val = (val * 1000) / adc->adc_info[adc_chan].gain; + + if (adc->adc_info[adc_chan].is_uncalibrated) { + /* 2% worse */ + min_gain_error -= 20; + min_offset_error = -36; + } else { + val = (val * adc->adc_info[adc_chan].gain_error - + adc->adc_info[adc_chan].offset) / + 1000; + min_offset_error = -2; + } + + return palmas_gpadc_threshold_with_tolerance(val, + min_INL, + min_gain_error, + min_offset_error); +} + static int palmas_gpadc_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { @@ -432,8 +586,217 @@ out: return ret; } +static int palmas_gpadc_read_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir) +{ + struct palmas_gpadc *adc = iio_priv(indio_dev); + int adc_chan = chan->channel; + int ret = 0; + + if (adc_chan > PALMAS_ADC_CH_MAX || type != IIO_EV_TYPE_THRESH) + return -EINVAL; + + mutex_lock(&adc->lock); + + if (palmas_gpadc_get_event(adc, adc_chan, dir)) + ret = 1; + + mutex_unlock(&adc->lock); + + return ret; +} + +static int palmas_adc_configure_events(struct palmas_gpadc *adc); +static int palmas_adc_reset_events(struct palmas_gpadc *adc); + +static int palmas_gpadc_reconfigure_event_channels(struct palmas_gpadc *adc) +{ + return (adc->event0.enabled || adc->event1.enabled) ? + palmas_adc_configure_events(adc) : + palmas_adc_reset_events(adc); +} + +static int palmas_gpadc_enable_event_config(struct palmas_gpadc *adc, + const struct iio_chan_spec *chan, + enum iio_event_direction dir) +{ + struct palmas_adc_event *ev; + int adc_chan = chan->channel; + + if (palmas_gpadc_get_event(adc, adc_chan, dir)) + /* already enabled */ + return 0; + + if (adc->event0.channel == -1) { + ev = &adc->event0; + } else if (adc->event1.channel == -1) { + /* event0 has to be the lowest channel */ + if (adc_chan < adc->event0.channel) { + adc->event1 = adc->event0; + ev = &adc->event0; + } else { + ev = &adc->event1; + } + } else { /* both AUTO channels already in use */ + dev_warn(adc->dev, "event0 - %d, event1 - %d\n", + adc->event0.channel, adc->event1.channel); + return -EBUSY; + } + + ev->enabled = true; + ev->channel = adc_chan; + ev->direction = dir; + + return palmas_gpadc_reconfigure_event_channels(adc); +} + +static int palmas_gpadc_disable_event_config(struct palmas_gpadc *adc, + const struct iio_chan_spec *chan, + enum iio_event_direction dir) +{ + int adc_chan = chan->channel; + struct palmas_adc_event *ev = palmas_gpadc_get_event(adc, adc_chan, dir); + + if (!ev) + return 0; + + if (ev == &adc->event0) { + adc->event0 = adc->event1; + ev = &adc->event1; + } + + ev->enabled = false; + ev->channel = -1; + ev->direction = IIO_EV_DIR_NONE; + + return palmas_gpadc_reconfigure_event_channels(adc); +} + +static int palmas_gpadc_write_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + int state) +{ + struct palmas_gpadc *adc = iio_priv(indio_dev); + int adc_chan = chan->channel; + int ret; + + if (adc_chan > PALMAS_ADC_CH_MAX || type != IIO_EV_TYPE_THRESH) + return -EINVAL; + + mutex_lock(&adc->lock); + + if (state) + ret = palmas_gpadc_enable_event_config(adc, chan, dir); + else + ret = palmas_gpadc_disable_event_config(adc, chan, dir); + + mutex_unlock(&adc->lock); + + return ret; +} + +static int palmas_gpadc_read_event_value(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int *val, int *val2) +{ + struct palmas_gpadc *adc = iio_priv(indio_dev); + int adc_chan = chan->channel; + int ret; + + if (adc_chan > PALMAS_ADC_CH_MAX || type != IIO_EV_TYPE_THRESH) + return -EINVAL; + + mutex_lock(&adc->lock); + + switch (info) { + case IIO_EV_INFO_VALUE: + *val = (dir == IIO_EV_DIR_RISING) ? + adc->thresholds[adc_chan].high : + adc->thresholds[adc_chan].low; + ret = IIO_VAL_INT; + break; + default: + ret = -EINVAL; + break; + } + + mutex_unlock(&adc->lock); + + return ret; +} + +static int palmas_gpadc_write_event_value(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int val, int val2) +{ + struct palmas_gpadc *adc = iio_priv(indio_dev); + int adc_chan = chan->channel; + int old; + int ret; + + if (adc_chan > PALMAS_ADC_CH_MAX || type != IIO_EV_TYPE_THRESH) + return -EINVAL; + + mutex_lock(&adc->lock); + switch (info) { + case IIO_EV_INFO_VALUE: + if (val < 0 || val > 0xFFF) { + ret = -EINVAL; + goto out_unlock; + } + if (dir == IIO_EV_DIR_RISING) { + old = adc->thresholds[adc_chan].high; + adc->thresholds[adc_chan].high = val; + } else { + old = adc->thresholds[adc_chan].low; + adc->thresholds[adc_chan].low = val; + } + ret = 0; + break; + default: + ret = -EINVAL; + goto out_unlock; + } + + if (val != old && palmas_gpadc_get_event(adc, adc_chan, dir)) + ret = palmas_gpadc_reconfigure_event_channels(adc); + +out_unlock: + mutex_unlock(&adc->lock); + + return ret; +} + static const struct iio_info palmas_gpadc_iio_info = { .read_raw = palmas_gpadc_read_raw, + .read_event_config = palmas_gpadc_read_event_config, + .write_event_config = palmas_gpadc_write_event_config, + .read_event_value = palmas_gpadc_read_event_value, + .write_event_value = palmas_gpadc_write_event_value, +}; + +static const struct iio_event_spec palmas_gpadc_events[] = { + { + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_RISING, + .mask_separate = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_ENABLE), + }, { + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_FALLING, + .mask_separate = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_ENABLE), + }, }; #define PALMAS_ADC_CHAN_IIO(chan, _type, chan_info) \ @@ -444,6 +807,8 @@ static const struct iio_info palmas_gpadc_iio_info = { BIT(chan_info), \ .indexed = 1, \ .channel = PALMAS_ADC_CH_##chan, \ + .event_spec = palmas_gpadc_events, \ + .num_event_specs = ARRAY_SIZE(palmas_gpadc_events) \ } static const struct iio_chan_spec palmas_gpadc_iio_channel[] = { @@ -493,6 +858,13 @@ static int palmas_gpadc_get_adc_dt_data(struct platform_device *pdev, return 0; } +static void palmas_gpadc_reset(void *data) +{ + struct palmas_gpadc *adc = data; + if (adc->event0.enabled || adc->event1.enabled) + palmas_adc_reset_events(adc); +} + static int palmas_gpadc_probe(struct platform_device *pdev) { struct palmas_gpadc *adc; @@ -532,53 +904,49 @@ static int palmas_gpadc_probe(struct platform_device *pdev) adc->auto_conversion_period = gpadc_pdata->auto_conversion_period_ms; adc->irq = palmas_irq_get_virq(adc->palmas, PALMAS_GPADC_EOC_SW_IRQ); - if (adc->irq < 0) { - dev_err(adc->dev, - "get virq failed: %d\n", adc->irq); - ret = adc->irq; - goto out; - } - ret = request_threaded_irq(adc->irq, NULL, - palmas_gpadc_irq, - IRQF_ONESHOT, dev_name(adc->dev), - adc); - if (ret < 0) { - dev_err(adc->dev, - "request irq %d failed: %d\n", adc->irq, ret); - goto out; - } + if (adc->irq < 0) + return dev_err_probe(adc->dev, adc->irq, "get virq failed\n"); - if (gpadc_pdata->adc_wakeup1_data) { - memcpy(&adc->wakeup1_data, gpadc_pdata->adc_wakeup1_data, - sizeof(adc->wakeup1_data)); - adc->wakeup1_enable = true; - adc->irq_auto_0 = platform_get_irq(pdev, 1); - ret = request_threaded_irq(adc->irq_auto_0, NULL, - palmas_gpadc_irq_auto, - IRQF_ONESHOT, - "palmas-adc-auto-0", adc); - if (ret < 0) { - dev_err(adc->dev, "request auto0 irq %d failed: %d\n", - adc->irq_auto_0, ret); - goto out_irq_free; - } - } + ret = devm_request_threaded_irq(&pdev->dev, adc->irq, NULL, + palmas_gpadc_irq, + IRQF_ONESHOT, dev_name(adc->dev), + adc); + if (ret < 0) + return dev_err_probe(adc->dev, ret, + "request irq %d failed\n", adc->irq); - if (gpadc_pdata->adc_wakeup2_data) { - memcpy(&adc->wakeup2_data, gpadc_pdata->adc_wakeup2_data, - sizeof(adc->wakeup2_data)); - adc->wakeup2_enable = true; - adc->irq_auto_1 = platform_get_irq(pdev, 2); - ret = request_threaded_irq(adc->irq_auto_1, NULL, - palmas_gpadc_irq_auto, - IRQF_ONESHOT, - "palmas-adc-auto-1", adc); - if (ret < 0) { - dev_err(adc->dev, "request auto1 irq %d failed: %d\n", - adc->irq_auto_1, ret); - goto out_irq_auto0_free; - } - } + adc->irq_auto_0 = platform_get_irq(pdev, 1); + if (adc->irq_auto_0 < 0) + return dev_err_probe(adc->dev, adc->irq_auto_0, + "get auto0 irq failed\n"); + + ret = devm_request_threaded_irq(&pdev->dev, adc->irq_auto_0, NULL, + palmas_gpadc_irq_auto, IRQF_ONESHOT, + "palmas-adc-auto-0", indio_dev); + if (ret < 0) + return dev_err_probe(adc->dev, ret, + "request auto0 irq %d failed\n", + adc->irq_auto_0); + + adc->irq_auto_1 = platform_get_irq(pdev, 2); + if (adc->irq_auto_1 < 0) + return dev_err_probe(adc->dev, adc->irq_auto_1, + "get auto1 irq failed\n"); + + ret = devm_request_threaded_irq(&pdev->dev, adc->irq_auto_1, NULL, + palmas_gpadc_irq_auto, IRQF_ONESHOT, + "palmas-adc-auto-1", indio_dev); + if (ret < 0) + return dev_err_probe(adc->dev, ret, + "request auto1 irq %d failed\n", + adc->irq_auto_1); + + adc->event0.enabled = false; + adc->event0.channel = -1; + adc->event0.direction = IIO_EV_DIR_NONE; + adc->event1.enabled = false; + adc->event1.channel = -1; + adc->event1.direction = IIO_EV_DIR_NONE; /* set the current source 0 (value 0/5/15/20 uA => 0..3) */ if (gpadc_pdata->ch0_current <= 1) @@ -608,11 +976,10 @@ static int palmas_gpadc_probe(struct platform_device *pdev) indio_dev->channels = palmas_gpadc_iio_channel; indio_dev->num_channels = ARRAY_SIZE(palmas_gpadc_iio_channel); - ret = iio_device_register(indio_dev); - if (ret < 0) { - dev_err(adc->dev, "iio_device_register() failed: %d\n", ret); - goto out_irq_auto1_free; - } + ret = devm_iio_device_register(&pdev->dev, indio_dev); + if (ret < 0) + return dev_err_probe(adc->dev, ret, + "iio_device_register() failed\n"); device_set_wakeup_capable(&pdev->dev, 1); for (i = 0; i < PALMAS_ADC_CH_MAX; i++) { @@ -620,41 +987,14 @@ static int palmas_gpadc_probe(struct platform_device *pdev) palmas_gpadc_calibrate(adc, i); } - if (adc->wakeup1_enable || adc->wakeup2_enable) - device_wakeup_enable(&pdev->dev); - - return 0; - -out_irq_auto1_free: - if (gpadc_pdata->adc_wakeup2_data) - free_irq(adc->irq_auto_1, adc); -out_irq_auto0_free: - if (gpadc_pdata->adc_wakeup1_data) - free_irq(adc->irq_auto_0, adc); -out_irq_free: - free_irq(adc->irq, adc); -out: - return ret; -} - -static int palmas_gpadc_remove(struct platform_device *pdev) -{ - struct iio_dev *indio_dev = dev_get_drvdata(&pdev->dev); - struct palmas_gpadc *adc = iio_priv(indio_dev); - - if (adc->wakeup1_enable || adc->wakeup2_enable) - device_wakeup_disable(&pdev->dev); - iio_device_unregister(indio_dev); - free_irq(adc->irq, adc); - if (adc->wakeup1_enable) - free_irq(adc->irq_auto_0, adc); - if (adc->wakeup2_enable) - free_irq(adc->irq_auto_1, adc); + ret = devm_add_action(&pdev->dev, palmas_gpadc_reset, adc); + if (ret) + return ret; return 0; } -static int palmas_adc_wakeup_configure(struct palmas_gpadc *adc) +static int palmas_adc_configure_events(struct palmas_gpadc *adc) { int adc_period, conv; int i; @@ -680,17 +1020,23 @@ static int palmas_adc_wakeup_configure(struct palmas_gpadc *adc) } conv = 0; - if (adc->wakeup1_enable) { + if (adc->event0.enabled) { + struct palmas_adc_event *ev = &adc->event0; int polarity; - ch0 = adc->wakeup1_data.adc_channel_number; + ch0 = ev->channel; conv |= PALMAS_GPADC_AUTO_CTRL_AUTO_CONV0_EN; - if (adc->wakeup1_data.adc_high_threshold > 0) { - thres = adc->wakeup1_data.adc_high_threshold; + switch (ev->direction) { + case IIO_EV_DIR_RISING: + thres = palmas_gpadc_get_high_threshold_raw(adc, ev); polarity = 0; - } else { - thres = adc->wakeup1_data.adc_low_threshold; + break; + case IIO_EV_DIR_FALLING: + thres = palmas_gpadc_get_low_threshold_raw(adc, ev); polarity = PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_POL; + break; + default: + return -EINVAL; } ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE, @@ -711,17 +1057,23 @@ static int palmas_adc_wakeup_configure(struct palmas_gpadc *adc) } } - if (adc->wakeup2_enable) { + if (adc->event1.enabled) { + struct palmas_adc_event *ev = &adc->event1; int polarity; - ch1 = adc->wakeup2_data.adc_channel_number; + ch1 = ev->channel; conv |= PALMAS_GPADC_AUTO_CTRL_AUTO_CONV1_EN; - if (adc->wakeup2_data.adc_high_threshold > 0) { - thres = adc->wakeup2_data.adc_high_threshold; + switch (ev->direction) { + case IIO_EV_DIR_RISING: + thres = palmas_gpadc_get_high_threshold_raw(adc, ev); polarity = 0; - } else { - thres = adc->wakeup2_data.adc_low_threshold; + break; + case IIO_EV_DIR_FALLING: + thres = palmas_gpadc_get_low_threshold_raw(adc, ev); polarity = PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_POL; + break; + default: + return -EINVAL; } ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE, @@ -759,7 +1111,7 @@ static int palmas_adc_wakeup_configure(struct palmas_gpadc *adc) return ret; } -static int palmas_adc_wakeup_reset(struct palmas_gpadc *adc) +static int palmas_adc_reset_events(struct palmas_gpadc *adc) { int ret; @@ -781,20 +1133,14 @@ static int palmas_gpadc_suspend(struct device *dev) { struct iio_dev *indio_dev = dev_get_drvdata(dev); struct palmas_gpadc *adc = iio_priv(indio_dev); - int wakeup = adc->wakeup1_enable || adc->wakeup2_enable; - int ret; - if (!device_may_wakeup(dev) || !wakeup) + if (!device_may_wakeup(dev)) return 0; - ret = palmas_adc_wakeup_configure(adc); - if (ret < 0) - return ret; - - if (adc->wakeup1_enable) + if (adc->event0.enabled) enable_irq_wake(adc->irq_auto_0); - if (adc->wakeup2_enable) + if (adc->event1.enabled) enable_irq_wake(adc->irq_auto_1); return 0; @@ -804,20 +1150,14 @@ static int palmas_gpadc_resume(struct device *dev) { struct iio_dev *indio_dev = dev_get_drvdata(dev); struct palmas_gpadc *adc = iio_priv(indio_dev); - int wakeup = adc->wakeup1_enable || adc->wakeup2_enable; - int ret; - if (!device_may_wakeup(dev) || !wakeup) + if (!device_may_wakeup(dev)) return 0; - ret = palmas_adc_wakeup_reset(adc); - if (ret < 0) - return ret; - - if (adc->wakeup1_enable) + if (adc->event0.enabled) disable_irq_wake(adc->irq_auto_0); - if (adc->wakeup2_enable) + if (adc->event1.enabled) disable_irq_wake(adc->irq_auto_1); return 0; @@ -834,7 +1174,6 @@ MODULE_DEVICE_TABLE(of, of_palmas_gpadc_match_tbl); static struct platform_driver palmas_gpadc_driver = { .probe = palmas_gpadc_probe, - .remove = palmas_gpadc_remove, .driver = { .name = MOD_NAME, .pm = pm_sleep_ptr(&palmas_pm_ops), diff --git a/drivers/iio/adc/qcom-pm8xxx-xoadc.c b/drivers/iio/adc/qcom-pm8xxx-xoadc.c index eb424496ee1d..64a3aeb6261c 100644 --- a/drivers/iio/adc/qcom-pm8xxx-xoadc.c +++ b/drivers/iio/adc/qcom-pm8xxx-xoadc.c @@ -758,7 +758,7 @@ static int pm8xxx_xoadc_parse_channel(struct device *dev, /* Find the right channel setting */ chid = 0; hwchan = &hw_channels[0]; - while (hwchan && hwchan->datasheet_name) { + while (hwchan->datasheet_name) { if (hwchan->pre_scale_mux == pre_scale_mux && hwchan->amux_channel == amux_channel) break; diff --git a/drivers/iio/adc/rcar-gyroadc.c b/drivers/iio/adc/rcar-gyroadc.c index 27d9e147b4b7..b8972f673c9d 100644 --- a/drivers/iio/adc/rcar-gyroadc.c +++ b/drivers/iio/adc/rcar-gyroadc.c @@ -283,7 +283,7 @@ static const struct of_device_id rcar_gyroadc_match[] = { MODULE_DEVICE_TABLE(of, rcar_gyroadc_match); -static const struct of_device_id rcar_gyroadc_child_match[] = { +static const struct of_device_id rcar_gyroadc_child_match[] __maybe_unused = { /* Mode 1 ADCs */ { .compatible = "fujitsu,mb88101a", diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c index 45d4e79f8e55..1aadb2ad2cab 100644 --- a/drivers/iio/adc/stm32-adc.c +++ b/drivers/iio/adc/stm32-adc.c @@ -2588,7 +2588,7 @@ static const struct stm32_adc_cfg stm32f4_adc_cfg = { .irq_clear = stm32f4_adc_irq_clear, }; -const unsigned int stm32_adc_min_ts_h7[] = { 0, 0, 0, 4300, 9000 }; +static const unsigned int stm32_adc_min_ts_h7[] = { 0, 0, 0, 4300, 9000 }; static_assert(ARRAY_SIZE(stm32_adc_min_ts_h7) == STM32_ADC_INT_CH_NB); static const struct stm32_adc_cfg stm32h7_adc_cfg = { @@ -2607,7 +2607,7 @@ static const struct stm32_adc_cfg stm32h7_adc_cfg = { .ts_int_ch = stm32_adc_min_ts_h7, }; -const unsigned int stm32_adc_min_ts_mp1[] = { 100, 100, 100, 4300, 9800 }; +static const unsigned int stm32_adc_min_ts_mp1[] = { 100, 100, 100, 4300, 9800 }; static_assert(ARRAY_SIZE(stm32_adc_min_ts_mp1) == STM32_ADC_INT_CH_NB); static const struct stm32_adc_cfg stm32mp1_adc_cfg = { @@ -2627,7 +2627,7 @@ static const struct stm32_adc_cfg stm32mp1_adc_cfg = { .ts_int_ch = stm32_adc_min_ts_mp1, }; -const unsigned int stm32_adc_min_ts_mp13[] = { 100, 0, 0, 4300, 9800 }; +static const unsigned int stm32_adc_min_ts_mp13[] = { 100, 0, 0, 4300, 9800 }; static_assert(ARRAY_SIZE(stm32_adc_min_ts_mp13) == STM32_ADC_INT_CH_NB); static const struct stm32_adc_cfg stm32mp13_adc_cfg = { diff --git a/drivers/iio/adc/ti-ads1100.c b/drivers/iio/adc/ti-ads1100.c new file mode 100644 index 000000000000..6b5aebb82455 --- /dev/null +++ b/drivers/iio/adc/ti-ads1100.c @@ -0,0 +1,445 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ADS1100 - Texas Instruments Analog-to-Digital Converter + * + * Copyright (c) 2023, Topic Embedded Products + * + * Datasheet: https://www.ti.com/lit/gpn/ads1100 + * IIO driver for ADS1100 and ADS1000 ADC 16-bit I2C + */ + +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/mutex.h> +#include <linux/property.h> +#include <linux/pm_runtime.h> +#include <linux/regulator/consumer.h> +#include <linux/units.h> + +#include <linux/iio/iio.h> +#include <linux/iio/types.h> + +/* The ADS1100 has a single byte config register */ + +/* Conversion in progress bit */ +#define ADS1100_CFG_ST_BSY BIT(7) +/* Single conversion bit */ +#define ADS1100_CFG_SC BIT(4) +/* Data rate */ +#define ADS1100_DR_MASK GENMASK(3, 2) +/* Gain */ +#define ADS1100_PGA_MASK GENMASK(1, 0) + +#define ADS1100_CONTINUOUS 0 +#define ADS1100_SINGLESHOT ADS1100_CFG_SC + +#define ADS1100_SLEEP_DELAY_MS 2000 + +static const int ads1100_data_rate[] = { 128, 32, 16, 8 }; +static const int ads1100_data_rate_bits[] = { 12, 14, 15, 16 }; + +struct ads1100_data { + struct i2c_client *client; + struct regulator *reg_vdd; + struct mutex lock; + int scale_avail[2 * 4]; /* 4 gain settings */ + u8 config; + bool supports_data_rate; /* Only the ADS1100 can select the rate */ +}; + +static const struct iio_chan_spec ads1100_channel = { + .type = IIO_VOLTAGE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_all = + BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all_available = + BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ), + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + .datasheet_name = "AIN", +}; + +static int ads1100_set_config_bits(struct ads1100_data *data, u8 mask, u8 value) +{ + int ret; + u8 config = (data->config & ~mask) | (value & mask); + + if (data->config == config) + return 0; /* Already done */ + + ret = i2c_master_send(data->client, &config, 1); + if (ret < 0) + return ret; + + data->config = config; + + return 0; +}; + +static int ads1100_data_bits(struct ads1100_data *data) +{ + return ads1100_data_rate_bits[FIELD_GET(ADS1100_DR_MASK, data->config)]; +} + +static int ads1100_get_adc_result(struct ads1100_data *data, int chan, int *val) +{ + int ret; + __be16 buffer; + s16 value; + + if (chan != 0) + return -EINVAL; + + ret = pm_runtime_resume_and_get(&data->client->dev); + if (ret < 0) + return ret; + + ret = i2c_master_recv(data->client, (char *)&buffer, sizeof(buffer)); + + pm_runtime_mark_last_busy(&data->client->dev); + pm_runtime_put_autosuspend(&data->client->dev); + + if (ret < 0) { + dev_err(&data->client->dev, "I2C read fail: %d\n", ret); + return ret; + } + + /* Value is always 16-bit 2's complement */ + value = be16_to_cpu(buffer); + + /* Shift result to compensate for bit resolution vs. sample rate */ + value <<= 16 - ads1100_data_bits(data); + + *val = sign_extend32(value, 15); + + return 0; +} + +static int ads1100_set_scale(struct ads1100_data *data, int val, int val2) +{ + int microvolts; + int gain; + + /* With Vdd between 2.7 and 5V, the scale is always below 1 */ + if (val) + return -EINVAL; + + if (!val2) + return -EINVAL; + + microvolts = regulator_get_voltage(data->reg_vdd); + /* + * val2 is in 'micro' units, n = val2 / 1000000 + * result must be millivolts, d = microvolts / 1000 + * the full-scale value is d/n, corresponds to 2^15, + * hence the gain = (d / n) >> 15, factoring out the 1000 and moving the + * bitshift so everything fits in 32-bits yields this formula. + */ + gain = DIV_ROUND_CLOSEST(microvolts, BIT(15)) * MILLI / val2; + if (gain < BIT(0) || gain > BIT(3)) + return -EINVAL; + + ads1100_set_config_bits(data, ADS1100_PGA_MASK, ffs(gain) - 1); + + return 0; +} + +static int ads1100_set_data_rate(struct ads1100_data *data, int chan, int rate) +{ + unsigned int i; + unsigned int size; + + size = data->supports_data_rate ? ARRAY_SIZE(ads1100_data_rate) : 1; + for (i = 0; i < size; i++) { + if (ads1100_data_rate[i] == rate) + return ads1100_set_config_bits(data, ADS1100_DR_MASK, + FIELD_PREP(ADS1100_DR_MASK, i)); + } + + return -EINVAL; +} + +static int ads1100_get_vdd_millivolts(struct ads1100_data *data) +{ + return regulator_get_voltage(data->reg_vdd) / (MICRO / MILLI); +} + +static void ads1100_calc_scale_avail(struct ads1100_data *data) +{ + int millivolts = ads1100_get_vdd_millivolts(data); + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(data->scale_avail) / 2; i++) { + data->scale_avail[i * 2 + 0] = millivolts; + data->scale_avail[i * 2 + 1] = 15 + i; + } +} + +static int ads1100_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + struct ads1100_data *data = iio_priv(indio_dev); + + if (chan->type != IIO_VOLTAGE) + return -EINVAL; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + *type = IIO_VAL_INT; + *vals = ads1100_data_rate; + if (data->supports_data_rate) + *length = ARRAY_SIZE(ads1100_data_rate); + else + *length = 1; + return IIO_AVAIL_LIST; + case IIO_CHAN_INFO_SCALE: + *type = IIO_VAL_FRACTIONAL_LOG2; + *vals = data->scale_avail; + *length = ARRAY_SIZE(data->scale_avail); + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } +} + +static int ads1100_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + int ret; + struct ads1100_data *data = iio_priv(indio_dev); + + mutex_lock(&data->lock); + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + break; + + ret = ads1100_get_adc_result(data, chan->address, val); + if (ret >= 0) + ret = IIO_VAL_INT; + iio_device_release_direct_mode(indio_dev); + break; + case IIO_CHAN_INFO_SCALE: + /* full-scale is the supply voltage in millivolts */ + *val = ads1100_get_vdd_millivolts(data); + *val2 = 15 + FIELD_GET(ADS1100_PGA_MASK, data->config); + ret = IIO_VAL_FRACTIONAL_LOG2; + break; + case IIO_CHAN_INFO_SAMP_FREQ: + *val = ads1100_data_rate[FIELD_GET(ADS1100_DR_MASK, + data->config)]; + ret = IIO_VAL_INT; + break; + default: + ret = -EINVAL; + break; + } + mutex_unlock(&data->lock); + + return ret; +} + +static int ads1100_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct ads1100_data *data = iio_priv(indio_dev); + int ret; + + mutex_lock(&data->lock); + switch (mask) { + case IIO_CHAN_INFO_SCALE: + ret = ads1100_set_scale(data, val, val2); + break; + case IIO_CHAN_INFO_SAMP_FREQ: + ret = ads1100_set_data_rate(data, chan->address, val); + break; + default: + ret = -EINVAL; + break; + } + mutex_unlock(&data->lock); + + return ret; +} + +static const struct iio_info ads1100_info = { + .read_avail = ads1100_read_avail, + .read_raw = ads1100_read_raw, + .write_raw = ads1100_write_raw, +}; + +static int ads1100_setup(struct ads1100_data *data) +{ + int ret; + u8 buffer[3]; + + /* Setup continuous sampling mode at 8sps */ + buffer[0] = ADS1100_DR_MASK | ADS1100_CONTINUOUS; + ret = i2c_master_send(data->client, buffer, 1); + if (ret < 0) + return ret; + + ret = i2c_master_recv(data->client, buffer, sizeof(buffer)); + if (ret < 0) + return ret; + + /* Config register returned in third byte, strip away the busy status */ + data->config = buffer[2] & ~ADS1100_CFG_ST_BSY; + + /* Detect the sample rate capability by checking the DR bits */ + data->supports_data_rate = FIELD_GET(ADS1100_DR_MASK, buffer[2]) != 0; + + return 0; +} + +static void ads1100_reg_disable(void *reg) +{ + regulator_disable(reg); +} + +static void ads1100_disable_continuous(void *data) +{ + ads1100_set_config_bits(data, ADS1100_CFG_SC, ADS1100_SINGLESHOT); +} + +static int ads1100_probe(struct i2c_client *client) +{ + struct iio_dev *indio_dev; + struct ads1100_data *data; + struct device *dev = &client->dev; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + dev_set_drvdata(dev, data); + data->client = client; + mutex_init(&data->lock); + + indio_dev->name = "ads1100"; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = &ads1100_channel; + indio_dev->num_channels = 1; + indio_dev->info = &ads1100_info; + + data->reg_vdd = devm_regulator_get(dev, "vdd"); + if (IS_ERR(data->reg_vdd)) + return dev_err_probe(dev, PTR_ERR(data->reg_vdd), + "Failed to get vdd regulator\n"); + + ret = regulator_enable(data->reg_vdd); + if (ret < 0) + return dev_err_probe(dev, ret, + "Failed to enable vdd regulator\n"); + + ret = devm_add_action_or_reset(dev, ads1100_reg_disable, data->reg_vdd); + if (ret) + return ret; + + ret = ads1100_setup(data); + if (ret) + return dev_err_probe(dev, ret, + "Failed to communicate with device\n"); + + ret = devm_add_action_or_reset(dev, ads1100_disable_continuous, data); + if (ret) + return ret; + + ads1100_calc_scale_avail(data); + + pm_runtime_set_autosuspend_delay(dev, ADS1100_SLEEP_DELAY_MS); + pm_runtime_use_autosuspend(dev); + pm_runtime_set_active(dev); + ret = devm_pm_runtime_enable(dev); + if (ret) + return dev_err_probe(dev, ret, "Failed to enable pm_runtime\n"); + + ret = devm_iio_device_register(dev, indio_dev); + if (ret) + return dev_err_probe(dev, ret, + "Failed to register IIO device\n"); + + return 0; +} + +static int ads1100_runtime_suspend(struct device *dev) +{ + struct ads1100_data *data = dev_get_drvdata(dev); + + ads1100_set_config_bits(data, ADS1100_CFG_SC, ADS1100_SINGLESHOT); + regulator_disable(data->reg_vdd); + + return 0; +} + +static int ads1100_runtime_resume(struct device *dev) +{ + struct ads1100_data *data = dev_get_drvdata(dev); + int ret; + + ret = regulator_enable(data->reg_vdd); + if (ret) { + dev_err(&data->client->dev, "Failed to enable Vdd\n"); + return ret; + } + + /* + * We'll always change the mode bit in the config register, so there is + * no need here to "force" a write to the config register. If the device + * has been power-cycled, we'll re-write its config register now. + */ + return ads1100_set_config_bits(data, ADS1100_CFG_SC, + ADS1100_CONTINUOUS); +} + +static DEFINE_RUNTIME_DEV_PM_OPS(ads1100_pm_ops, + ads1100_runtime_suspend, + ads1100_runtime_resume, + NULL); + +static const struct i2c_device_id ads1100_id[] = { + { "ads1100" }, + { "ads1000" }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, ads1100_id); + +static const struct of_device_id ads1100_of_match[] = { + {.compatible = "ti,ads1100" }, + {.compatible = "ti,ads1000" }, + { } +}; + +MODULE_DEVICE_TABLE(of, ads1100_of_match); + +static struct i2c_driver ads1100_driver = { + .driver = { + .name = "ads1100", + .of_match_table = ads1100_of_match, + .pm = pm_ptr(&ads1100_pm_ops), + }, + .probe_new = ads1100_probe, + .id_table = ads1100_id, +}; + +module_i2c_driver(ads1100_driver); + +MODULE_AUTHOR("Mike Looijmans <mike.looijmans@topic.nl>"); +MODULE_DESCRIPTION("Texas Instruments ADS1100 ADC driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/addac/Kconfig b/drivers/iio/addac/Kconfig index 2843fcb70e24..877f9124803c 100644 --- a/drivers/iio/addac/Kconfig +++ b/drivers/iio/addac/Kconfig @@ -35,7 +35,9 @@ config STX104 tristate "Apex Embedded Systems STX104 driver" depends on PC104 && X86 select ISA_BUS_API + select REGMAP_MMIO select GPIOLIB + select GPIO_REGMAP help Say yes here to build support for the Apex Embedded Systems STX104 integrated analog PC/104 card. diff --git a/drivers/iio/addac/ad74413r.c b/drivers/iio/addac/ad74413r.c index f32c8c2fb26d..07e9f6ae16a8 100644 --- a/drivers/iio/addac/ad74413r.c +++ b/drivers/iio/addac/ad74413r.c @@ -39,6 +39,7 @@ struct ad74413r_chip_info { struct ad74413r_channel_config { u32 func; + u32 drive_strength; bool gpo_comparator; bool initialized; }; @@ -99,6 +100,7 @@ struct ad74413r_state { #define AD74413R_REG_ADC_CONFIG_X(x) (0x05 + (x)) #define AD74413R_ADC_CONFIG_RANGE_MASK GENMASK(7, 5) #define AD74413R_ADC_CONFIG_REJECTION_MASK GENMASK(4, 3) +#define AD74413R_ADC_CONFIG_CH_200K_TO_GND BIT(2) #define AD74413R_ADC_RANGE_10V 0b000 #define AD74413R_ADC_RANGE_2P5V_EXT_POW 0b001 #define AD74413R_ADC_RANGE_2P5V_INT_POW 0b010 @@ -111,6 +113,7 @@ struct ad74413r_state { #define AD74413R_REG_DIN_CONFIG_X(x) (0x09 + (x)) #define AD74413R_DIN_DEBOUNCE_MASK GENMASK(4, 0) #define AD74413R_DIN_DEBOUNCE_LEN BIT(5) +#define AD74413R_DIN_SINK_MASK GENMASK(9, 6) #define AD74413R_REG_DAC_CODE_X(x) (0x16 + (x)) #define AD74413R_DAC_CODE_MAX GENMASK(12, 0) @@ -261,6 +264,18 @@ static int ad74413r_set_comp_debounce(struct ad74413r_state *st, val); } +static int ad74413r_set_comp_drive_strength(struct ad74413r_state *st, + unsigned int offset, + unsigned int strength) +{ + strength = min(strength, 1800U); + + return regmap_update_bits(st->regmap, AD74413R_REG_DIN_CONFIG_X(offset), + AD74413R_DIN_SINK_MASK, + FIELD_PREP(AD74413R_DIN_SINK_MASK, strength / 120)); +} + + static void ad74413r_gpio_set(struct gpio_chip *chip, unsigned int offset, int val) { @@ -424,9 +439,20 @@ static int ad74413r_set_channel_dac_code(struct ad74413r_state *st, static int ad74413r_set_channel_function(struct ad74413r_state *st, unsigned int channel, u8 func) { - return regmap_update_bits(st->regmap, + int ret; + + ret = regmap_update_bits(st->regmap, AD74413R_REG_CH_FUNC_SETUP_X(channel), AD74413R_CH_FUNC_SETUP_MASK, func); + if (ret) + return ret; + + if (func == CH_FUNC_CURRENT_INPUT_LOOP_POWER) + ret = regmap_set_bits(st->regmap, + AD74413R_REG_ADC_CONFIG_X(channel), + AD74413R_ADC_CONFIG_CH_200K_TO_GND); + + return ret; } static int ad74413r_set_adc_conv_seq(struct ad74413r_state *st, @@ -1112,6 +1138,11 @@ static struct iio_chan_spec ad74413r_current_input_channels[] = { AD74413R_ADC_CURRENT_CHANNEL, }; +static struct iio_chan_spec ad74413r_current_input_loop_channels[] = { + AD74413R_DAC_CHANNEL(IIO_CURRENT, BIT(IIO_CHAN_INFO_SCALE)), + AD74413R_ADC_CURRENT_CHANNEL, +}; + static struct iio_chan_spec ad74413r_resistance_input_channels[] = { AD74413R_ADC_CHANNEL(IIO_RESISTANCE, BIT(IIO_CHAN_INFO_PROCESSED)), }; @@ -1135,7 +1166,7 @@ static const struct ad74413r_channels ad74413r_channels_map[] = { [CH_FUNC_CURRENT_OUTPUT] = AD74413R_CHANNELS(current_output), [CH_FUNC_VOLTAGE_INPUT] = AD74413R_CHANNELS(voltage_input), [CH_FUNC_CURRENT_INPUT_EXT_POWER] = AD74413R_CHANNELS(current_input), - [CH_FUNC_CURRENT_INPUT_LOOP_POWER] = AD74413R_CHANNELS(current_input), + [CH_FUNC_CURRENT_INPUT_LOOP_POWER] = AD74413R_CHANNELS(current_input_loop), [CH_FUNC_RESISTANCE_INPUT] = AD74413R_CHANNELS(resistance_input), [CH_FUNC_DIGITAL_INPUT_LOGIC] = AD74413R_CHANNELS(digital_input), [CH_FUNC_DIGITAL_INPUT_LOOP_POWER] = AD74413R_CHANNELS(digital_input), @@ -1190,6 +1221,9 @@ static int ad74413r_parse_channel_config(struct iio_dev *indio_dev, config->gpo_comparator = fwnode_property_read_bool(channel_node, "adi,gpo-comparator"); + fwnode_property_read_u32(channel_node, "drive-strength-microamp", + &config->drive_strength); + if (!config->gpo_comparator) st->num_gpo_gpios++; @@ -1269,6 +1303,7 @@ static int ad74413r_setup_gpios(struct ad74413r_state *st) unsigned int gpo_gpio_i = 0; unsigned int i; u8 gpo_config; + u32 strength; int ret; for (i = 0; i < AD74413R_CHANNEL_MAX; i++) { @@ -1285,6 +1320,11 @@ static int ad74413r_setup_gpios(struct ad74413r_state *st) config->func == CH_FUNC_DIGITAL_INPUT_LOOP_POWER) st->comp_gpio_offsets[comp_gpio_i++] = i; + strength = config->drive_strength; + ret = ad74413r_set_comp_drive_strength(st, i, strength); + if (ret) + return ret; + ret = ad74413r_set_gpo_config(st, i, gpo_config); if (ret) return ret; diff --git a/drivers/iio/addac/stx104.c b/drivers/iio/addac/stx104.c index 48a91a95e597..d1f7ce033b46 100644 --- a/drivers/iio/addac/stx104.c +++ b/drivers/iio/addac/stx104.c @@ -3,19 +3,20 @@ * IIO driver for the Apex Embedded Systems STX104 * Copyright (C) 2016 William Breathitt Gray */ -#include <linux/bitops.h> +#include <linux/bitfield.h> +#include <linux/bits.h> #include <linux/device.h> -#include <linux/errno.h> -#include <linux/gpio/driver.h> +#include <linux/err.h> +#include <linux/gpio/regmap.h> #include <linux/iio/iio.h> #include <linux/iio/types.h> -#include <linux/io.h> -#include <linux/ioport.h> #include <linux/isa.h> #include <linux/kernel.h> +#include <linux/limits.h> #include <linux/module.h> #include <linux/moduleparam.h> -#include <linux/spinlock.h> +#include <linux/mutex.h> +#include <linux/regmap.h> #include <linux/types.h> #define STX104_OUT_CHAN(chan) { \ @@ -45,101 +46,211 @@ static unsigned int num_stx104; module_param_hw_array(base, uint, ioport, &num_stx104, 0); MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses"); -/** - * struct stx104_reg - device register structure - * @ssr_ad: Software Strobe Register and ADC Data - * @achan: ADC Channel - * @dio: Digital I/O - * @dac: DAC Channels - * @cir_asr: Clear Interrupts and ADC Status - * @acr: ADC Control - * @pccr_fsh: Pacer Clock Control and FIFO Status MSB - * @acfg: ADC Configuration - */ -struct stx104_reg { - u16 ssr_ad; - u8 achan; - u8 dio; - u16 dac[2]; - u8 cir_asr; - u8 acr; - u8 pccr_fsh; - u8 acfg; -}; +#define STX104_AIO_BASE 0x0 +#define STX104_SOFTWARE_STROBE STX104_AIO_BASE +#define STX104_ADC_DATA STX104_AIO_BASE +#define STX104_ADC_CHANNEL (STX104_AIO_BASE + 0x2) +#define STX104_DIO_REG (STX104_AIO_BASE + 0x3) +#define STX104_DAC_BASE (STX104_AIO_BASE + 0x4) +#define STX104_ADC_STATUS (STX104_AIO_BASE + 0x8) +#define STX104_ADC_CONTROL (STX104_AIO_BASE + 0x9) +#define STX104_ADC_CONFIGURATION (STX104_AIO_BASE + 0x11) + +#define STX104_AIO_DATA_STRIDE 2 +#define STX104_DAC_OFFSET(_channel) (STX104_DAC_BASE + STX104_AIO_DATA_STRIDE * (_channel)) + +/* ADC Channel */ +#define STX104_FC GENMASK(3, 0) +#define STX104_LC GENMASK(7, 4) +#define STX104_SINGLE_CHANNEL(_channel) \ + (u8_encode_bits(_channel, STX104_FC) | u8_encode_bits(_channel, STX104_LC)) + +/* ADC Status */ +#define STX104_SD BIT(5) +#define STX104_CNV BIT(7) +#define STX104_DIFFERENTIAL 1 + +/* ADC Control */ +#define STX104_ALSS GENMASK(1, 0) +#define STX104_SOFTWARE_TRIGGER u8_encode_bits(0x0, STX104_ALSS) + +/* ADC Configuration */ +#define STX104_GAIN GENMASK(1, 0) +#define STX104_ADBU BIT(2) +#define STX104_BIPOLAR 0 +#define STX104_GAIN_X1 0 +#define STX104_GAIN_X2 1 +#define STX104_GAIN_X4 2 +#define STX104_GAIN_X8 3 /** * struct stx104_iio - IIO device private data structure - * @chan_out_states: channels' output states - * @reg: I/O address offset for the device registers + * @lock: synchronization lock to prevent I/O race conditions + * @aio_data_map: Regmap for analog I/O data + * @aio_ctl_map: Regmap for analog I/O control */ struct stx104_iio { - unsigned int chan_out_states[STX104_NUM_OUT_CHAN]; - struct stx104_reg __iomem *reg; + struct mutex lock; + struct regmap *aio_data_map; + struct regmap *aio_ctl_map; }; -/** - * struct stx104_gpio - GPIO device private data structure - * @chip: instance of the gpio_chip - * @lock: synchronization lock to prevent I/O race conditions - * @base: base port address of the GPIO device - * @out_state: output bits state - */ -struct stx104_gpio { - struct gpio_chip chip; - spinlock_t lock; - u8 __iomem *base; - unsigned int out_state; +static const struct regmap_range aio_ctl_wr_ranges[] = { + regmap_reg_range(0x0, 0x0), regmap_reg_range(0x2, 0x2), regmap_reg_range(0x9, 0x9), + regmap_reg_range(0x11, 0x11), +}; +static const struct regmap_range aio_ctl_rd_ranges[] = { + regmap_reg_range(0x2, 0x2), regmap_reg_range(0x8, 0x9), regmap_reg_range(0x11, 0x11), +}; +static const struct regmap_range aio_ctl_volatile_ranges[] = { + regmap_reg_range(0x8, 0x8), +}; +static const struct regmap_access_table aio_ctl_wr_table = { + .yes_ranges = aio_ctl_wr_ranges, + .n_yes_ranges = ARRAY_SIZE(aio_ctl_wr_ranges), +}; +static const struct regmap_access_table aio_ctl_rd_table = { + .yes_ranges = aio_ctl_rd_ranges, + .n_yes_ranges = ARRAY_SIZE(aio_ctl_rd_ranges), +}; +static const struct regmap_access_table aio_ctl_volatile_table = { + .yes_ranges = aio_ctl_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(aio_ctl_volatile_ranges), +}; + +static const struct regmap_config aio_ctl_regmap_config = { + .name = "aio_ctl", + .reg_bits = 8, + .reg_stride = 1, + .reg_base = STX104_AIO_BASE, + .val_bits = 8, + .io_port = true, + .wr_table = &aio_ctl_wr_table, + .rd_table = &aio_ctl_rd_table, + .volatile_table = &aio_ctl_volatile_table, + .cache_type = REGCACHE_FLAT, +}; + +static const struct regmap_range aio_data_wr_ranges[] = { + regmap_reg_range(0x4, 0x6), +}; +static const struct regmap_range aio_data_rd_ranges[] = { + regmap_reg_range(0x0, 0x0), +}; +static const struct regmap_access_table aio_data_wr_table = { + .yes_ranges = aio_data_wr_ranges, + .n_yes_ranges = ARRAY_SIZE(aio_data_wr_ranges), +}; +static const struct regmap_access_table aio_data_rd_table = { + .yes_ranges = aio_data_rd_ranges, + .n_yes_ranges = ARRAY_SIZE(aio_data_rd_ranges), +}; + +static const struct regmap_config aio_data_regmap_config = { + .name = "aio_data", + .reg_bits = 16, + .reg_stride = STX104_AIO_DATA_STRIDE, + .reg_base = STX104_AIO_BASE, + .val_bits = 16, + .io_port = true, + .wr_table = &aio_data_wr_table, + .rd_table = &aio_data_rd_table, + .volatile_table = &aio_data_rd_table, + .cache_type = REGCACHE_FLAT, +}; + +static const struct regmap_config dio_regmap_config = { + .name = "dio", + .reg_bits = 8, + .reg_stride = 1, + .reg_base = STX104_DIO_REG, + .val_bits = 8, + .io_port = true, }; static int stx104_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { struct stx104_iio *const priv = iio_priv(indio_dev); - struct stx104_reg __iomem *const reg = priv->reg; + int err; unsigned int adc_config; - int adbu; - int gain; + unsigned int value; + unsigned int adc_status; switch (mask) { case IIO_CHAN_INFO_HARDWAREGAIN: - /* get gain configuration */ - adc_config = ioread8(®->acfg); - gain = adc_config & 0x3; + err = regmap_read(priv->aio_ctl_map, STX104_ADC_CONFIGURATION, &adc_config); + if (err) + return err; - *val = 1 << gain; + *val = BIT(u8_get_bits(adc_config, STX104_GAIN)); return IIO_VAL_INT; case IIO_CHAN_INFO_RAW: if (chan->output) { - *val = priv->chan_out_states[chan->channel]; + err = regmap_read(priv->aio_data_map, STX104_DAC_OFFSET(chan->channel), + &value); + if (err) + return err; + *val = value; return IIO_VAL_INT; } + mutex_lock(&priv->lock); + /* select ADC channel */ - iowrite8(chan->channel | (chan->channel << 4), ®->achan); + err = regmap_write(priv->aio_ctl_map, STX104_ADC_CHANNEL, + STX104_SINGLE_CHANNEL(chan->channel)); + if (err) { + mutex_unlock(&priv->lock); + return err; + } - /* trigger ADC sample capture by writing to the 8-bit - * Software Strobe Register and wait for completion + /* + * Trigger ADC sample capture by writing to the 8-bit Software Strobe Register and + * wait for completion; the conversion time range is 5 microseconds to 53.68 seconds + * in steps of 25 nanoseconds. The actual Analog Input Frame Timer time interval is + * calculated as: + * ai_time_frame_ns = ( AIFT + 1 ) * ( 25 nanoseconds ). + * Where 0 <= AIFT <= 2147483648. */ - iowrite8(0, ®->ssr_ad); - while (ioread8(®->cir_asr) & BIT(7)); + err = regmap_write(priv->aio_ctl_map, STX104_SOFTWARE_STROBE, 0); + if (err) { + mutex_unlock(&priv->lock); + return err; + } + err = regmap_read_poll_timeout(priv->aio_ctl_map, STX104_ADC_STATUS, adc_status, + !u8_get_bits(adc_status, STX104_CNV), 0, 53687092); + if (err) { + mutex_unlock(&priv->lock); + return err; + } + + err = regmap_read(priv->aio_data_map, STX104_ADC_DATA, &value); + if (err) { + mutex_unlock(&priv->lock); + return err; + } + *val = value; - *val = ioread16(®->ssr_ad); + mutex_unlock(&priv->lock); return IIO_VAL_INT; case IIO_CHAN_INFO_OFFSET: /* get ADC bipolar/unipolar configuration */ - adc_config = ioread8(®->acfg); - adbu = !(adc_config & BIT(2)); + err = regmap_read(priv->aio_ctl_map, STX104_ADC_CONFIGURATION, &adc_config); + if (err) + return err; - *val = -32768 * adbu; + *val = (u8_get_bits(adc_config, STX104_ADBU) == STX104_BIPOLAR) ? -32768 : 0; return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: /* get ADC bipolar/unipolar and gain configuration */ - adc_config = ioread8(®->acfg); - adbu = !(adc_config & BIT(2)); - gain = adc_config & 0x3; + err = regmap_read(priv->aio_ctl_map, STX104_ADC_CONFIGURATION, &adc_config); + if (err) + return err; *val = 5; - *val2 = 15 - adbu + gain; + *val2 = (u8_get_bits(adc_config, STX104_ADBU) == STX104_BIPOLAR) ? 14 : 15; + *val2 += u8_get_bits(adc_config, STX104_GAIN); return IIO_VAL_FRACTIONAL_LOG2; } @@ -150,40 +261,37 @@ static int stx104_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int val, int val2, long mask) { struct stx104_iio *const priv = iio_priv(indio_dev); + u8 gain; switch (mask) { case IIO_CHAN_INFO_HARDWAREGAIN: /* Only four gain states (x1, x2, x4, x8) */ switch (val) { case 1: - iowrite8(0, &priv->reg->acfg); + gain = STX104_GAIN_X1; break; case 2: - iowrite8(1, &priv->reg->acfg); + gain = STX104_GAIN_X2; break; case 4: - iowrite8(2, &priv->reg->acfg); + gain = STX104_GAIN_X4; break; case 8: - iowrite8(3, &priv->reg->acfg); + gain = STX104_GAIN_X8; break; default: return -EINVAL; } - return 0; + return regmap_write(priv->aio_ctl_map, STX104_ADC_CONFIGURATION, gain); case IIO_CHAN_INFO_RAW: - if (chan->output) { - /* DAC can only accept up to a 16-bit value */ - if ((unsigned int)val > 65535) - return -EINVAL; + if (!chan->output) + return -EINVAL; - priv->chan_out_states[chan->channel] = val; - iowrite16(val, &priv->reg->dac[chan->channel]); + if (val < 0 || val > U16_MAX) + return -EINVAL; - return 0; - } - return -EINVAL; + return regmap_write(priv->aio_data_map, STX104_DAC_OFFSET(chan->channel), val); } return -EINVAL; @@ -212,119 +320,66 @@ static const struct iio_chan_spec stx104_channels_diff[] = { STX104_IN_CHAN(6, 1), STX104_IN_CHAN(7, 1) }; -static int stx104_gpio_get_direction(struct gpio_chip *chip, - unsigned int offset) -{ - /* GPIO 0-3 are input only, while the rest are output only */ - if (offset < 4) - return 1; - - return 0; -} - -static int stx104_gpio_direction_input(struct gpio_chip *chip, - unsigned int offset) +static int stx104_reg_mask_xlate(struct gpio_regmap *const gpio, const unsigned int base, + unsigned int offset, unsigned int *const reg, + unsigned int *const mask) { + /* Output lines are located at same register bit offsets as input lines */ if (offset >= 4) - return -EINVAL; - - return 0; -} + offset -= 4; -static int stx104_gpio_direction_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - if (offset < 4) - return -EINVAL; + *reg = base; + *mask = BIT(offset); - chip->set(chip, offset, value); return 0; } -static int stx104_gpio_get(struct gpio_chip *chip, unsigned int offset) -{ - struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip); - - if (offset >= 4) - return -EINVAL; - - return !!(ioread8(stx104gpio->base) & BIT(offset)); -} - -static int stx104_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask, - unsigned long *bits) -{ - struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip); - - *bits = ioread8(stx104gpio->base); - - return 0; -} - -static void stx104_gpio_set(struct gpio_chip *chip, unsigned int offset, - int value) -{ - struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip); - const unsigned int mask = BIT(offset) >> 4; - unsigned long flags; - - if (offset < 4) - return; - - spin_lock_irqsave(&stx104gpio->lock, flags); - - if (value) - stx104gpio->out_state |= mask; - else - stx104gpio->out_state &= ~mask; - - iowrite8(stx104gpio->out_state, stx104gpio->base); - - spin_unlock_irqrestore(&stx104gpio->lock, flags); -} - #define STX104_NGPIO 8 static const char *stx104_names[STX104_NGPIO] = { "DIN0", "DIN1", "DIN2", "DIN3", "DOUT0", "DOUT1", "DOUT2", "DOUT3" }; -static void stx104_gpio_set_multiple(struct gpio_chip *chip, - unsigned long *mask, unsigned long *bits) +static int stx104_init_hw(struct stx104_iio *const priv) { - struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip); - unsigned long flags; - - /* verify masked GPIO are output */ - if (!(*mask & 0xF0)) - return; + int err; - *mask >>= 4; - *bits >>= 4; + /* configure device for software trigger operation */ + err = regmap_write(priv->aio_ctl_map, STX104_ADC_CONTROL, STX104_SOFTWARE_TRIGGER); + if (err) + return err; - spin_lock_irqsave(&stx104gpio->lock, flags); + /* initialize gain setting to x1 */ + err = regmap_write(priv->aio_ctl_map, STX104_ADC_CONFIGURATION, STX104_GAIN_X1); + if (err) + return err; - stx104gpio->out_state &= ~*mask; - stx104gpio->out_state |= *mask & *bits; - iowrite8(stx104gpio->out_state, stx104gpio->base); + /* initialize DAC outputs to 0V */ + err = regmap_write(priv->aio_data_map, STX104_DAC_BASE, 0); + if (err) + return err; + err = regmap_write(priv->aio_data_map, STX104_DAC_BASE + STX104_AIO_DATA_STRIDE, 0); + if (err) + return err; - spin_unlock_irqrestore(&stx104gpio->lock, flags); + return 0; } static int stx104_probe(struct device *dev, unsigned int id) { struct iio_dev *indio_dev; struct stx104_iio *priv; - struct stx104_gpio *stx104gpio; + struct gpio_regmap_config gpio_config; + void __iomem *stx104_base; + struct regmap *aio_ctl_map; + struct regmap *aio_data_map; + struct regmap *dio_map; int err; + unsigned int adc_status; indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); if (!indio_dev) return -ENOMEM; - stx104gpio = devm_kzalloc(dev, sizeof(*stx104gpio), GFP_KERNEL); - if (!stx104gpio) - return -ENOMEM; - if (!devm_request_region(dev, base[id], STX104_EXTENT, dev_name(dev))) { dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n", @@ -332,16 +387,37 @@ static int stx104_probe(struct device *dev, unsigned int id) return -EBUSY; } - priv = iio_priv(indio_dev); - priv->reg = devm_ioport_map(dev, base[id], STX104_EXTENT); - if (!priv->reg) + stx104_base = devm_ioport_map(dev, base[id], STX104_EXTENT); + if (!stx104_base) return -ENOMEM; + aio_ctl_map = devm_regmap_init_mmio(dev, stx104_base, &aio_ctl_regmap_config); + if (IS_ERR(aio_ctl_map)) + return dev_err_probe(dev, PTR_ERR(aio_ctl_map), + "Unable to initialize aio_ctl register map\n"); + + aio_data_map = devm_regmap_init_mmio(dev, stx104_base, &aio_data_regmap_config); + if (IS_ERR(aio_data_map)) + return dev_err_probe(dev, PTR_ERR(aio_data_map), + "Unable to initialize aio_data register map\n"); + + dio_map = devm_regmap_init_mmio(dev, stx104_base, &dio_regmap_config); + if (IS_ERR(dio_map)) + return dev_err_probe(dev, PTR_ERR(dio_map), + "Unable to initialize dio register map\n"); + + priv = iio_priv(indio_dev); + priv->aio_ctl_map = aio_ctl_map; + priv->aio_data_map = aio_data_map; + indio_dev->info = &stx104_info; indio_dev->modes = INDIO_DIRECT_MODE; - /* determine if differential inputs */ - if (ioread8(&priv->reg->cir_asr) & BIT(5)) { + err = regmap_read(aio_ctl_map, STX104_ADC_STATUS, &adc_status); + if (err) + return err; + + if (u8_get_bits(adc_status, STX104_SD) == STX104_DIFFERENTIAL) { indio_dev->num_channels = ARRAY_SIZE(stx104_channels_diff); indio_dev->channels = stx104_channels_diff; } else { @@ -351,41 +427,29 @@ static int stx104_probe(struct device *dev, unsigned int id) indio_dev->name = dev_name(dev); - /* configure device for software trigger operation */ - iowrite8(0, &priv->reg->acr); + mutex_init(&priv->lock); - /* initialize gain setting to x1 */ - iowrite8(0, &priv->reg->acfg); - - /* initialize DAC output to 0V */ - iowrite16(0, &priv->reg->dac[0]); - iowrite16(0, &priv->reg->dac[1]); - - stx104gpio->chip.label = dev_name(dev); - stx104gpio->chip.parent = dev; - stx104gpio->chip.owner = THIS_MODULE; - stx104gpio->chip.base = -1; - stx104gpio->chip.ngpio = STX104_NGPIO; - stx104gpio->chip.names = stx104_names; - stx104gpio->chip.get_direction = stx104_gpio_get_direction; - stx104gpio->chip.direction_input = stx104_gpio_direction_input; - stx104gpio->chip.direction_output = stx104_gpio_direction_output; - stx104gpio->chip.get = stx104_gpio_get; - stx104gpio->chip.get_multiple = stx104_gpio_get_multiple; - stx104gpio->chip.set = stx104_gpio_set; - stx104gpio->chip.set_multiple = stx104_gpio_set_multiple; - stx104gpio->base = &priv->reg->dio; - stx104gpio->out_state = 0x0; - - spin_lock_init(&stx104gpio->lock); - - err = devm_gpiochip_add_data(dev, &stx104gpio->chip, stx104gpio); - if (err) { - dev_err(dev, "GPIO registering failed (%d)\n", err); + err = stx104_init_hw(priv); + if (err) + return err; + + err = devm_iio_device_register(dev, indio_dev); + if (err) return err; - } - return devm_iio_device_register(dev, indio_dev); + gpio_config = (struct gpio_regmap_config) { + .parent = dev, + .regmap = dio_map, + .ngpio = STX104_NGPIO, + .names = stx104_names, + .reg_dat_base = GPIO_REGMAP_ADDR(STX104_DIO_REG), + .reg_set_base = GPIO_REGMAP_ADDR(STX104_DIO_REG), + .ngpio_per_reg = STX104_NGPIO, + .reg_mask_xlate = stx104_reg_mask_xlate, + .drvdata = dio_map, + }; + + return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &gpio_config)); } static struct isa_driver stx104_driver = { diff --git a/drivers/iio/chemical/sps30_i2c.c b/drivers/iio/chemical/sps30_i2c.c index 2aed483a2fde..0cb5d9b65d62 100644 --- a/drivers/iio/chemical/sps30_i2c.c +++ b/drivers/iio/chemical/sps30_i2c.c @@ -68,10 +68,10 @@ static int sps30_i2c_command(struct sps30_state *state, u16 cmd, void *arg, size /* * Internally sensor stores measurements in a following manner: * - * PM1: upper two bytes, crc8, lower two bytes, crc8 + * PM1: upper two bytes, crc8, lower two bytes, crc8 * PM2P5: upper two bytes, crc8, lower two bytes, crc8 - * PM4: upper two bytes, crc8, lower two bytes, crc8 - * PM10: upper two bytes, crc8, lower two bytes, crc8 + * PM4: upper two bytes, crc8, lower two bytes, crc8 + * PM10: upper two bytes, crc8, lower two bytes, crc8 * * What follows next are number concentration measurements and * typical particle size measurement which we omit. diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c index 899b640c0a70..a0df9250a69f 100644 --- a/drivers/iio/common/st_sensors/st_sensors_trigger.c +++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c @@ -85,7 +85,7 @@ static irqreturn_t st_sensors_irq_thread(int irq, void *p) */ if (sdata->hw_irq_trigger && st_sensors_new_samples_available(indio_dev, sdata)) { - iio_trigger_poll_chained(p); + iio_trigger_poll_nested(p); } else { dev_dbg(indio_dev->dev.parent, "spurious IRQ\n"); return IRQ_NONE; @@ -110,7 +110,7 @@ static irqreturn_t st_sensors_irq_thread(int irq, void *p) dev_dbg(indio_dev->dev.parent, "more samples came in during polling\n"); sdata->hw_timestamp = iio_get_time_ns(indio_dev); - iio_trigger_poll_chained(p); + iio_trigger_poll_nested(p); } return IRQ_HANDLED; diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index d3f90cf86143..3acd9c3f388e 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -277,6 +277,7 @@ config CIO_DAC tristate "Measurement Computing CIO-DAC IIO driver" depends on X86 && (ISA_BUS || PC104) select ISA_BUS_API + select REGMAP_MMIO help Say yes here to build support for the Measurement Computing CIO-DAC analog output device family (CIO-DAC16, CIO-DAC08, PC104-DAC06). The diff --git a/drivers/iio/dac/ad5592r-base.c b/drivers/iio/dac/ad5592r-base.c index 7a9b5fc1e579..076bc9ecfb49 100644 --- a/drivers/iio/dac/ad5592r-base.c +++ b/drivers/iio/dac/ad5592r-base.c @@ -124,6 +124,10 @@ static int ad5592r_gpio_request(struct gpio_chip *chip, unsigned offset) return 0; } +static const char * const ad5592r_gpio_names[] = { + "GPIO0", "GPIO1", "GPIO2", "GPIO3", "GPIO4", "GPIO5", "GPIO6", "GPIO7", +}; + static int ad5592r_gpio_init(struct ad5592r_state *st) { if (!st->gpio_map) @@ -140,6 +144,7 @@ static int ad5592r_gpio_init(struct ad5592r_state *st) st->gpiochip.set = ad5592r_gpio_set; st->gpiochip.request = ad5592r_gpio_request; st->gpiochip.owner = THIS_MODULE; + st->gpiochip.names = ad5592r_gpio_names; mutex_init(&st->gpio_lock); diff --git a/drivers/iio/dac/cio-dac.c b/drivers/iio/dac/cio-dac.c index 18a64f72fc18..069904d00c2e 100644 --- a/drivers/iio/dac/cio-dac.c +++ b/drivers/iio/dac/cio-dac.c @@ -4,18 +4,17 @@ * Copyright (C) 2016 William Breathitt Gray * * This driver supports the following Measurement Computing devices: CIO-DAC16, - * CIO-DAC06, and PC104-DAC06. + * CIO-DAC08, and PC104-DAC06. */ -#include <linux/bitops.h> +#include <linux/bits.h> #include <linux/device.h> -#include <linux/errno.h> +#include <linux/err.h> #include <linux/iio/iio.h> #include <linux/iio/types.h> -#include <linux/io.h> -#include <linux/ioport.h> #include <linux/isa.h> #include <linux/module.h> #include <linux/moduleparam.h> +#include <linux/regmap.h> #include <linux/types.h> #define CIO_DAC_NUM_CHAN 16 @@ -35,25 +34,51 @@ static unsigned int num_cio_dac; module_param_hw_array(base, uint, ioport, &num_cio_dac, 0); MODULE_PARM_DESC(base, "Measurement Computing CIO-DAC base addresses"); +#define CIO_DAC_BASE 0x00 +#define CIO_DAC_CHANNEL_STRIDE 2 + +static bool cio_dac_precious_reg(struct device *dev, unsigned int reg) +{ + /* + * All registers are considered precious; if the XFER jumper is set on + * the device, then no update occurs until a DAC register is read. + */ + return true; +} + +static const struct regmap_config cio_dac_regmap_config = { + .reg_bits = 16, + .reg_stride = 2, + .val_bits = 16, + .io_port = true, + .max_register = 0x1F, + .precious_reg = cio_dac_precious_reg, +}; + /** * struct cio_dac_iio - IIO device private data structure - * @chan_out_states: channels' output states - * @base: base memory address of the DAC device + * @map: Regmap for the device */ struct cio_dac_iio { - int chan_out_states[CIO_DAC_NUM_CHAN]; - u16 __iomem *base; + struct regmap *map; }; static int cio_dac_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { struct cio_dac_iio *const priv = iio_priv(indio_dev); + const unsigned int offset = chan->channel * CIO_DAC_CHANNEL_STRIDE; + int err; + unsigned int dac_val; if (mask != IIO_CHAN_INFO_RAW) return -EINVAL; - *val = priv->chan_out_states[chan->channel]; + err = regmap_read(priv->map, CIO_DAC_BASE + offset, &dac_val); + if (err) + return err; + + *val = dac_val; return IIO_VAL_INT; } @@ -62,6 +87,7 @@ static int cio_dac_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int val, int val2, long mask) { struct cio_dac_iio *const priv = iio_priv(indio_dev); + const unsigned int offset = chan->channel * CIO_DAC_CHANNEL_STRIDE; if (mask != IIO_CHAN_INFO_RAW) return -EINVAL; @@ -70,10 +96,7 @@ static int cio_dac_write_raw(struct iio_dev *indio_dev, if ((unsigned int)val > 4095) return -EINVAL; - priv->chan_out_states[chan->channel] = val; - iowrite16(val, priv->base + chan->channel); - - return 0; + return regmap_write(priv->map, CIO_DAC_BASE + offset, val); } static const struct iio_info cio_dac_info = { @@ -92,7 +115,7 @@ static int cio_dac_probe(struct device *dev, unsigned int id) { struct iio_dev *indio_dev; struct cio_dac_iio *priv; - unsigned int i; + void __iomem *regs; indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); if (!indio_dev) @@ -105,21 +128,22 @@ static int cio_dac_probe(struct device *dev, unsigned int id) return -EBUSY; } - priv = iio_priv(indio_dev); - priv->base = devm_ioport_map(dev, base[id], CIO_DAC_EXTENT); - if (!priv->base) + regs = devm_ioport_map(dev, base[id], CIO_DAC_EXTENT); + if (!regs) return -ENOMEM; + priv = iio_priv(indio_dev); + priv->map = devm_regmap_init_mmio(dev, regs, &cio_dac_regmap_config); + if (IS_ERR(priv->map)) + return dev_err_probe(dev, PTR_ERR(priv->map), + "Unable to initialize register map\n"); + indio_dev->info = &cio_dac_info; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = cio_dac_channels; indio_dev->num_channels = CIO_DAC_NUM_CHAN; indio_dev->name = dev_name(dev); - /* initialize DAC outputs to 0V */ - for (i = 0; i < CIO_DAC_NUM_CHAN; i++) - iowrite16(0, priv->base + i); - return devm_iio_device_register(dev, indio_dev); } diff --git a/drivers/iio/dac/max5522.c b/drivers/iio/dac/max5522.c index 00ba4e98fb9c..05034a306597 100644 --- a/drivers/iio/dac/max5522.c +++ b/drivers/iio/dac/max5522.c @@ -52,7 +52,7 @@ struct max5522_state { } \ } -const struct iio_chan_spec max5522_channels[] = { +static const struct iio_chan_spec max5522_channels[] = { MAX5522_CHANNEL(0), MAX5522_CHANNEL(1), }; diff --git a/drivers/iio/frequency/admv1013.c b/drivers/iio/frequency/admv1013.c index ed8167271358..9bf8337806fc 100644 --- a/drivers/iio/frequency/admv1013.c +++ b/drivers/iio/frequency/admv1013.c @@ -490,11 +490,6 @@ static int admv1013_init(struct admv1013_state *st) st->input_mode); } -static void admv1013_clk_disable(void *data) -{ - clk_disable_unprepare(data); -} - static void admv1013_reg_disable(void *data) { regulator_disable(data); @@ -559,11 +554,6 @@ static int admv1013_properties_parse(struct admv1013_state *st) return dev_err_probe(&spi->dev, PTR_ERR(st->reg), "failed to get the common-mode voltage\n"); - st->clkin = devm_clk_get(&spi->dev, "lo_in"); - if (IS_ERR(st->clkin)) - return dev_err_probe(&spi->dev, PTR_ERR(st->clkin), - "failed to get the LO input clock\n"); - return 0; } @@ -601,13 +591,10 @@ static int admv1013_probe(struct spi_device *spi) if (ret) return ret; - ret = clk_prepare_enable(st->clkin); - if (ret) - return ret; - - ret = devm_add_action_or_reset(&spi->dev, admv1013_clk_disable, st->clkin); - if (ret) - return ret; + st->clkin = devm_clk_get_enabled(&spi->dev, "lo_in"); + if (IS_ERR(st->clkin)) + return dev_err_probe(&spi->dev, PTR_ERR(st->clkin), + "failed to get the LO input clock\n"); st->nb.notifier_call = admv1013_freq_change; ret = devm_clk_notifier_register(&spi->dev, st->clkin, &st->nb); diff --git a/drivers/iio/gyro/fxas21002c_core.c b/drivers/iio/gyro/fxas21002c_core.c index 3ea1d4613080..c28d17ca6f5e 100644 --- a/drivers/iio/gyro/fxas21002c_core.c +++ b/drivers/iio/gyro/fxas21002c_core.c @@ -813,7 +813,7 @@ static irqreturn_t fxas21002c_data_rdy_thread(int irq, void *private) if (!data_ready) return IRQ_NONE; - iio_trigger_poll_chained(data->dready_trig); + iio_trigger_poll_nested(data->dready_trig); return IRQ_HANDLED; } diff --git a/drivers/iio/gyro/mpu3050-core.c b/drivers/iio/gyro/mpu3050-core.c index 6a6d84a3deda..a791ba3a693a 100644 --- a/drivers/iio/gyro/mpu3050-core.c +++ b/drivers/iio/gyro/mpu3050-core.c @@ -939,7 +939,7 @@ static irqreturn_t mpu3050_irq_thread(int irq, void *p) if (!(val & MPU3050_INT_STATUS_RAW_RDY)) return IRQ_NONE; - iio_trigger_poll_chained(p); + iio_trigger_poll_nested(p); return IRQ_HANDLED; } diff --git a/drivers/iio/humidity/hts221_buffer.c b/drivers/iio/humidity/hts221_buffer.c index 2a4107a79662..11ef38994a95 100644 --- a/drivers/iio/humidity/hts221_buffer.c +++ b/drivers/iio/humidity/hts221_buffer.c @@ -68,7 +68,7 @@ static irqreturn_t hts221_trigger_handler_thread(int irq, void *private) if (!(status & HTS221_RH_DRDY_MASK)) return IRQ_NONE; - iio_trigger_poll_chained(hw->trig); + iio_trigger_poll_nested(hw->trig); return IRQ_HANDLED; } diff --git a/drivers/iio/imu/adis16475.c b/drivers/iio/imu/adis16475.c index aec55f7e1f26..3abffb01ba31 100644 --- a/drivers/iio/imu/adis16475.c +++ b/drivers/iio/imu/adis16475.c @@ -326,11 +326,11 @@ static int adis16475_set_freq(struct adis16475 *st, const u32 freq) /* * This is not an hard requirement but it's not advised to run the IMU - * with a sample rate lower than 4000Hz due to possible undersampling + * with a sample rate lower than 1900Hz due to possible undersampling * issues. However, there are users that might really want to take the risk. * Hence, we provide a module parameter for them. If set, we allow sample - * rates lower than 4KHz. By default, we won't allow this and we just roundup - * the rate to the next multiple of the input clock bigger than 4KHz. This + * rates lower than 1.9KHz. By default, we won't allow this and we just roundup + * the rate to the next multiple of the input clock bigger than 1.9KHz. This * is done like this as in some cases (when DEC_RATE is 0) might give * us the closest value to the one desired by the user... */ diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig index 8c16cdacf2f2..5865a295a4df 100644 --- a/drivers/iio/imu/st_lsm6dsx/Kconfig +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig @@ -14,8 +14,8 @@ config IIO_ST_LSM6DSX sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, ism330dlc, lsm6dso, lsm6dsox, asm330lhh, asm330lhhx, lsm6dsr, lsm6ds3tr-c, ism330dhcx, lsm6dsrx, lsm6ds0, lsm6dsop, lsm6dstx, - lsm6dsv, lsm6dsv16x, lsm6dso16is, ism330is, lsm6dst and the - accelerometer/gyroscope of lsm9ds1. + lsm6dsv, lsm6dsv16x, lsm6dso16is, ism330is, asm330lhb, lsm6dst + and the accelerometer/gyroscope of lsm9ds1. To compile this driver as a module, choose M here: the module will be called st_lsm6dsx. diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index 499fcf8875b4..c19237717e81 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -37,9 +37,10 @@ #define ST_LSM6DSV16X_DEV_NAME "lsm6dsv16x" #define ST_LSM6DSO16IS_DEV_NAME "lsm6dso16is" #define ST_ISM330IS_DEV_NAME "ism330is" +#define ST_ASM330LHB_DEV_NAME "asm330lhb" enum st_lsm6dsx_hw_id { - ST_LSM6DS3_ID, + ST_LSM6DS3_ID = 1, ST_LSM6DS3H_ID, ST_LSM6DSL_ID, ST_LSM6DSM_ID, @@ -61,6 +62,7 @@ enum st_lsm6dsx_hw_id { ST_LSM6DSV16X_ID, ST_LSM6DSO16IS_ID, ST_ISM330IS_ID, + ST_ASM330LHB_ID, ST_LSM6DSX_MAX_ID, }; @@ -137,6 +139,13 @@ struct st_lsm6dsx_odr_table_entry { int odr_len; }; +struct st_lsm6dsx_samples_to_discard { + struct { + u32 milli_hz; + u16 samples; + } val[ST_LSM6DSX_ODR_LIST_SIZE]; +}; + struct st_lsm6dsx_fs { u32 gain; u8 val; @@ -291,6 +300,7 @@ struct st_lsm6dsx_ext_dev_settings { * @irq_config: interrupts related registers. * @drdy_mask: register info for data-ready mask (addr + mask). * @odr_table: Hw sensors odr table (Hz + val). + * @samples_to_discard: Number of samples to discard for filters settling time. * @fs_table: Hw sensors gain table (gain + val). * @decimator: List of decimator register info (addr + mask). * @batch: List of FIFO batching register info (addr + mask). @@ -323,6 +333,7 @@ struct st_lsm6dsx_settings { } irq_config; struct st_lsm6dsx_reg drdy_mask; struct st_lsm6dsx_odr_table_entry odr_table[2]; + struct st_lsm6dsx_samples_to_discard samples_to_discard[2]; struct st_lsm6dsx_fs_table_entry fs_table[2]; struct st_lsm6dsx_reg decimator[ST_LSM6DSX_MAX_ID]; struct st_lsm6dsx_reg batch[ST_LSM6DSX_MAX_ID]; @@ -353,6 +364,7 @@ enum st_lsm6dsx_fifo_mode { * @hw: Pointer to instance of struct st_lsm6dsx_hw. * @gain: Configured sensor sensitivity. * @odr: Output data rate of the sensor [Hz]. + * @samples_to_discard: Number of samples to discard for filters settling time. * @watermark: Sensor watermark level. * @decimator: Sensor decimation factor. * @sip: Number of samples in a given pattern. @@ -367,6 +379,7 @@ struct st_lsm6dsx_sensor { u32 gain; u32 odr; + u16 samples_to_discard; u16 watermark; u8 decimator; u8 sip; diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c index 7dd5205aea5b..066fe561c5e8 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c @@ -15,7 +15,7 @@ * value of the decimation factor and ODR set for each FIFO data set. * * LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/LSM6DSRX/ISM330DHCX/ - * LSM6DST/LSM6DSOP/LSM6DSTX/LSM6DSV: + * LSM6DST/LSM6DSOP/LSM6DSTX/LSM6DSV/ASM330LHB: * The FIFO buffer can be configured to store data from gyroscope and * accelerometer. Each sample is queued with a tag (1B) indicating data * source (gyroscope, accelerometer, hw timer). @@ -457,17 +457,31 @@ int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw) } if (gyro_sip > 0 && !(sip % gyro_sensor->decimator)) { - iio_push_to_buffers_with_timestamp( - hw->iio_devs[ST_LSM6DSX_ID_GYRO], - &hw->scan[ST_LSM6DSX_ID_GYRO], - gyro_sensor->ts_ref + ts); + /* + * We need to discards gyro samples during + * filters settling time + */ + if (gyro_sensor->samples_to_discard > 0) + gyro_sensor->samples_to_discard--; + else + iio_push_to_buffers_with_timestamp( + hw->iio_devs[ST_LSM6DSX_ID_GYRO], + &hw->scan[ST_LSM6DSX_ID_GYRO], + gyro_sensor->ts_ref + ts); gyro_sip--; } if (acc_sip > 0 && !(sip % acc_sensor->decimator)) { - iio_push_to_buffers_with_timestamp( - hw->iio_devs[ST_LSM6DSX_ID_ACC], - &hw->scan[ST_LSM6DSX_ID_ACC], - acc_sensor->ts_ref + ts); + /* + * We need to discards accel samples during + * filters settling time + */ + if (acc_sensor->samples_to_discard > 0) + acc_sensor->samples_to_discard--; + else + iio_push_to_buffers_with_timestamp( + hw->iio_devs[ST_LSM6DSX_ID_ACC], + &hw->scan[ST_LSM6DSX_ID_ACC], + acc_sensor->ts_ref + ts); acc_sip--; } if (ext_sip > 0 && !(sip % ext_sensor->decimator)) { @@ -654,6 +668,30 @@ int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw) return err; } +static void +st_lsm6dsx_update_samples_to_discard(struct st_lsm6dsx_sensor *sensor) +{ + const struct st_lsm6dsx_samples_to_discard *data; + struct st_lsm6dsx_hw *hw = sensor->hw; + int i; + + if (sensor->id != ST_LSM6DSX_ID_GYRO && + sensor->id != ST_LSM6DSX_ID_ACC) + return; + + /* check if drdy mask is supported in hw */ + if (hw->settings->drdy_mask.addr) + return; + + data = &hw->settings->samples_to_discard[sensor->id]; + for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++) { + if (data->val[i].milli_hz == sensor->odr) { + sensor->samples_to_discard = data->val[i].samples; + return; + } + } +} + int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable) { struct st_lsm6dsx_hw *hw = sensor->hw; @@ -673,6 +711,9 @@ int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable) goto out; } + if (enable) + st_lsm6dsx_update_samples_to_discard(sensor); + err = st_lsm6dsx_device_set_enable(sensor, enable); if (err < 0) goto out; diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index 3f6060c64f32..6a18b363cf73 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -56,6 +56,7 @@ #include <linux/kernel.h> #include <linux/module.h> +#include <linux/acpi.h> #include <linux/delay.h> #include <linux/iio/events.h> #include <linux/iio/iio.h> @@ -634,6 +635,24 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { .fs_len = 4, }, }, + .samples_to_discard = { + [ST_LSM6DSX_ID_ACC] = { + .val[0] = { 12500, 1 }, + .val[1] = { 26000, 1 }, + .val[2] = { 52000, 1 }, + .val[3] = { 104000, 2 }, + .val[4] = { 208000, 2 }, + .val[5] = { 416000, 2 }, + }, + [ST_LSM6DSX_ID_GYRO] = { + .val[0] = { 12500, 2 }, + .val[1] = { 26000, 5 }, + .val[2] = { 52000, 7 }, + .val[3] = { 104000, 12 }, + .val[4] = { 208000, 20 }, + .val[5] = { 416000, 36 }, + }, + }, .irq_config = { .irq1 = { .addr = 0x0d, @@ -1014,6 +1033,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { .hw_id = ST_LSM6DSOP_ID, .name = ST_LSM6DSOP_DEV_NAME, .wai = 0x6c, + }, { + .hw_id = ST_ASM330LHB_ID, + .name = ST_ASM330LHB_DEV_NAME, + .wai = 0x6b, }, }, .channels = { @@ -2602,6 +2625,73 @@ static int st_lsm6dsx_init_regulators(struct device *dev) return 0; } +#ifdef CONFIG_ACPI + +static int lsm6dsx_get_acpi_mount_matrix(struct device *dev, + struct iio_mount_matrix *orientation) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_device *adev = ACPI_COMPANION(dev); + union acpi_object *obj, *elements; + acpi_status status; + int i, j, val[3]; + char *str; + + if (!has_acpi_companion(dev)) + return -EINVAL; + + if (!acpi_has_method(adev->handle, "ROTM")) + return -EINVAL; + + status = acpi_evaluate_object(adev->handle, "ROTM", NULL, &buffer); + if (ACPI_FAILURE(status)) { + dev_warn(dev, "Failed to get ACPI mount matrix: %d\n", status); + return -EINVAL; + } + + obj = buffer.pointer; + if (obj->type != ACPI_TYPE_PACKAGE || obj->package.count != 3) + goto unknown_format; + + elements = obj->package.elements; + for (i = 0; i < 3; i++) { + if (elements[i].type != ACPI_TYPE_STRING) + goto unknown_format; + + str = elements[i].string.pointer; + if (sscanf(str, "%d %d %d", &val[0], &val[1], &val[2]) != 3) + goto unknown_format; + + for (j = 0; j < 3; j++) { + switch (val[j]) { + case -1: str = "-1"; break; + case 0: str = "0"; break; + case 1: str = "1"; break; + default: goto unknown_format; + } + orientation->rotation[i * 3 + j] = str; + } + } + + kfree(buffer.pointer); + return 0; + +unknown_format: + dev_warn(dev, "Unknown ACPI mount matrix format, ignoring\n"); + kfree(buffer.pointer); + return -EINVAL; +} + +#else + +static int lsm6dsx_get_acpi_mount_matrix(struct device *dev, + struct iio_mount_matrix *orientation) +{ + return false; +} + +#endif + int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, struct regmap *regmap) { @@ -2676,9 +2766,12 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, return err; } - err = iio_read_mount_matrix(hw->dev, &hw->orientation); - if (err) - return err; + err = lsm6dsx_get_acpi_mount_matrix(hw->dev, &hw->orientation); + if (err) { + err = iio_read_mount_matrix(hw->dev, &hw->orientation); + if (err) + return err; + } for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { if (!hw->iio_devs[i]) diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c index df5f60925260..020717f92363 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c @@ -23,10 +23,15 @@ static const struct regmap_config st_lsm6dsx_i2c_regmap_config = { static int st_lsm6dsx_i2c_probe(struct i2c_client *client) { - const struct i2c_device_id *id = i2c_client_get_device_id(client); - int hw_id = id->driver_data; + int hw_id; struct regmap *regmap; + hw_id = (kernel_ulong_t)device_get_match_data(&client->dev); + if (!hw_id) + hw_id = i2c_client_get_device_id(client)->driver_data; + if (!hw_id) + return -EINVAL; + regmap = devm_regmap_init_i2c(client, &st_lsm6dsx_i2c_regmap_config); if (IS_ERR(regmap)) { dev_err(&client->dev, "Failed to register i2c regmap %ld\n", PTR_ERR(regmap)); @@ -125,10 +130,20 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = { .compatible = "st,ism330is", .data = (void *)ST_ISM330IS_ID, }, + { + .compatible = "st,asm330lhb", + .data = (void *)ST_ASM330LHB_ID, + }, {}, }; MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match); +static const struct acpi_device_id st_lsm6dsx_i2c_acpi_match[] = { + { "SMO8B30", ST_LSM6DS3TRC_ID, }, + {} +}; +MODULE_DEVICE_TABLE(acpi, st_lsm6dsx_i2c_acpi_match); + static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = { { ST_LSM6DS3_DEV_NAME, ST_LSM6DS3_ID }, { ST_LSM6DS3H_DEV_NAME, ST_LSM6DS3H_ID }, @@ -152,6 +167,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = { { ST_LSM6DSV16X_DEV_NAME, ST_LSM6DSV16X_ID }, { ST_LSM6DSO16IS_DEV_NAME, ST_LSM6DSO16IS_ID }, { ST_ISM330IS_DEV_NAME, ST_ISM330IS_ID }, + { ST_ASM330LHB_DEV_NAME, ST_ASM330LHB_ID }, {}, }; MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table); @@ -161,6 +177,7 @@ static struct i2c_driver st_lsm6dsx_driver = { .name = "st_lsm6dsx_i2c", .pm = pm_sleep_ptr(&st_lsm6dsx_pm_ops), .of_match_table = st_lsm6dsx_i2c_of_match, + .acpi_match_table = st_lsm6dsx_i2c_acpi_match, }, .probe_new = st_lsm6dsx_i2c_probe, .id_table = st_lsm6dsx_i2c_id_table, diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c index 974584bda875..f56c170c41a9 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c @@ -125,6 +125,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = { .compatible = "st,ism330is", .data = (void *)ST_ISM330IS_ID, }, + { + .compatible = "st,asm330lhb", + .data = (void *)ST_ASM330LHB_ID, + }, {}, }; MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match); @@ -152,6 +156,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = { { ST_LSM6DSV16X_DEV_NAME, ST_LSM6DSV16X_ID }, { ST_LSM6DSO16IS_DEV_NAME, ST_LSM6DSO16IS_ID }, { ST_ISM330IS_DEV_NAME, ST_ISM330IS_ID }, + { ST_ASM330LHB_DEV_NAME, ST_ASM330LHB_ID }, {}, }; MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table); diff --git a/drivers/iio/industrialio-gts-helper.c b/drivers/iio/industrialio-gts-helper.c new file mode 100644 index 000000000000..8bb68975b259 --- /dev/null +++ b/drivers/iio/industrialio-gts-helper.c @@ -0,0 +1,1077 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* gain-time-scale conversion helpers for IIO light sensors + * + * Copyright (c) 2023 Matti Vaittinen <mazziesaccount@gmail.com> + */ + +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/export.h> +#include <linux/minmax.h> +#include <linux/module.h> +#include <linux/overflow.h> +#include <linux/slab.h> +#include <linux/sort.h> +#include <linux/types.h> +#include <linux/units.h> + +#include <linux/iio/iio-gts-helper.h> +#include <linux/iio/types.h> + +/** + * iio_gts_get_gain - Convert scale to total gain + * + * Internal helper for converting scale to total gain. + * + * @max: Maximum linearized scale. As an example, when scale is created + * in magnitude of NANOs and max scale is 64.1 - The linearized + * scale is 64 100 000 000. + * @scale: Linearized scale to compute the gain for. + * + * Return: (floored) gain corresponding to the scale. -EINVAL if scale + * is invalid. + */ +static int iio_gts_get_gain(const u64 max, const u64 scale) +{ + u64 full = max; + int tmp = 1; + + if (scale > full || !scale) + return -EINVAL; + + if (U64_MAX - full < scale) { + /* Risk of overflow */ + if (full - scale < scale) + return 1; + + full -= scale; + tmp++; + } + + while (full > scale * (u64)tmp) + tmp++; + + return tmp; +} + +/** + * gain_get_scale_fraction - get the gain or time based on scale and known one + * + * @max: Maximum linearized scale. As an example, when scale is created + * in magnitude of NANOs and max scale is 64.1 - The linearized + * scale is 64 100 000 000. + * @scale: Linearized scale to compute the gain/time for. + * @known: Either integration time or gain depending on which one is known + * @unknown: Pointer to variable where the computed gain/time is stored + * + * Internal helper for computing unknown fraction of total gain. + * Compute either gain or time based on scale and either the gain or time + * depending on which one is known. + * + * Return: 0 on success. + */ +static int gain_get_scale_fraction(const u64 max, u64 scale, int known, + int *unknown) +{ + int tot_gain; + + tot_gain = iio_gts_get_gain(max, scale); + if (tot_gain < 0) + return tot_gain; + + *unknown = tot_gain / known; + + /* We require total gain to be exact multiple of known * unknown */ + if (!*unknown || *unknown * known != tot_gain) + return -EINVAL; + + return 0; +} + +static int iio_gts_delinearize(u64 lin_scale, unsigned long scaler, + int *scale_whole, int *scale_nano) +{ + int frac; + + if (scaler > NANO) + return -EOVERFLOW; + + if (!scaler) + return -EINVAL; + + frac = do_div(lin_scale, scaler); + + *scale_whole = lin_scale; + *scale_nano = frac * (NANO / scaler); + + return 0; +} + +static int iio_gts_linearize(int scale_whole, int scale_nano, + unsigned long scaler, u64 *lin_scale) +{ + /* + * Expect scale to be (mostly) NANO or MICRO. Divide divider instead of + * multiplication followed by division to avoid overflow. + */ + if (scaler > NANO || !scaler) + return -EINVAL; + + *lin_scale = (u64)scale_whole * (u64)scaler + + (u64)(scale_nano / (NANO / scaler)); + + return 0; +} + +/** + * iio_gts_total_gain_to_scale - convert gain to scale + * @gts: Gain time scale descriptor + * @total_gain: the gain to be converted + * @scale_int: Pointer to integral part of the scale (typically val1) + * @scale_nano: Pointer to fractional part of the scale (nano or ppb) + * + * Convert the total gain value to scale. NOTE: This does not separate gain + * generated by HW-gain or integration time. It is up to caller to decide what + * part of the total gain is due to integration time and what due to HW-gain. + * + * Return: 0 on success. Negative errno on failure. + */ +int iio_gts_total_gain_to_scale(struct iio_gts *gts, int total_gain, + int *scale_int, int *scale_nano) +{ + u64 tmp; + + tmp = gts->max_scale; + + do_div(tmp, total_gain); + + return iio_gts_delinearize(tmp, NANO, scale_int, scale_nano); +} +EXPORT_SYMBOL_NS_GPL(iio_gts_total_gain_to_scale, IIO_GTS_HELPER); + +/** + * iio_gts_purge_avail_scale_table - free-up the available scale tables + * @gts: Gain time scale descriptor + * + * Free the space reserved by iio_gts_build_avail_scale_table(). + */ +static void iio_gts_purge_avail_scale_table(struct iio_gts *gts) +{ + int i; + + if (gts->per_time_avail_scale_tables) { + for (i = 0; i < gts->num_itime; i++) + kfree(gts->per_time_avail_scale_tables[i]); + + kfree(gts->per_time_avail_scale_tables); + gts->per_time_avail_scale_tables = NULL; + } + + kfree(gts->avail_all_scales_table); + gts->avail_all_scales_table = NULL; + + gts->num_avail_all_scales = 0; +} + +static int iio_gts_gain_cmp(const void *a, const void *b) +{ + return *(int *)a - *(int *)b; +} + +static int gain_to_scaletables(struct iio_gts *gts, int **gains, int **scales) +{ + int ret, i, j, new_idx, time_idx; + int *all_gains; + size_t gain_bytes; + + for (i = 0; i < gts->num_itime; i++) { + /* + * Sort the tables for nice output and for easier finding of + * unique values. + */ + sort(gains[i], gts->num_hwgain, sizeof(int), iio_gts_gain_cmp, + NULL); + + /* Convert gains to scales */ + for (j = 0; j < gts->num_hwgain; j++) { + ret = iio_gts_total_gain_to_scale(gts, gains[i][j], + &scales[i][2 * j], + &scales[i][2 * j + 1]); + if (ret) + return ret; + } + } + + gain_bytes = array_size(gts->num_hwgain, sizeof(int)); + all_gains = kcalloc(gts->num_itime, gain_bytes, GFP_KERNEL); + if (!all_gains) + return -ENOMEM; + + /* + * We assume all the gains for same integration time were unique. + * It is likely the first time table had greatest time multiplier as + * the times are in the order of preference and greater times are + * usually preferred. Hence we start from the last table which is likely + * to have the smallest total gains. + */ + time_idx = gts->num_itime - 1; + memcpy(all_gains, gains[time_idx], gain_bytes); + new_idx = gts->num_hwgain; + + while (time_idx--) { + for (j = 0; j < gts->num_hwgain; j++) { + int candidate = gains[time_idx][j]; + int chk; + + if (candidate > all_gains[new_idx - 1]) { + all_gains[new_idx] = candidate; + new_idx++; + + continue; + } + for (chk = 0; chk < new_idx; chk++) + if (candidate <= all_gains[chk]) + break; + + if (candidate == all_gains[chk]) + continue; + + memmove(&all_gains[chk + 1], &all_gains[chk], + (new_idx - chk) * sizeof(int)); + all_gains[chk] = candidate; + new_idx++; + } + } + + gts->avail_all_scales_table = kcalloc(new_idx, 2 * sizeof(int), + GFP_KERNEL); + if (!gts->avail_all_scales_table) { + ret = -ENOMEM; + goto free_out; + } + gts->num_avail_all_scales = new_idx; + + for (i = 0; i < gts->num_avail_all_scales; i++) { + ret = iio_gts_total_gain_to_scale(gts, all_gains[i], + >s->avail_all_scales_table[i * 2], + >s->avail_all_scales_table[i * 2 + 1]); + + if (ret) { + kfree(gts->avail_all_scales_table); + gts->num_avail_all_scales = 0; + goto free_out; + } + } + +free_out: + kfree(all_gains); + + return ret; +} + +/** + * iio_gts_build_avail_scale_table - create tables of available scales + * @gts: Gain time scale descriptor + * + * Build the tables which can represent the available scales based on the + * originally given gain and time tables. When both time and gain tables are + * given this results: + * 1. A set of tables representing available scales for each supported + * integration time. + * 2. A single table listing all the unique scales that any combination of + * supported gains and times can provide. + * + * NOTE: Space allocated for the tables must be freed using + * iio_gts_purge_avail_scale_table() when the tables are no longer needed. + * + * Return: 0 on success. + */ +static int iio_gts_build_avail_scale_table(struct iio_gts *gts) +{ + int **per_time_gains, **per_time_scales, i, j, ret = -ENOMEM; + + per_time_gains = kcalloc(gts->num_itime, sizeof(*per_time_gains), GFP_KERNEL); + if (!per_time_gains) + return ret; + + per_time_scales = kcalloc(gts->num_itime, sizeof(*per_time_scales), GFP_KERNEL); + if (!per_time_scales) + goto free_gains; + + for (i = 0; i < gts->num_itime; i++) { + per_time_scales[i] = kcalloc(gts->num_hwgain, 2 * sizeof(int), + GFP_KERNEL); + if (!per_time_scales[i]) + goto err_free_out; + + per_time_gains[i] = kcalloc(gts->num_hwgain, sizeof(int), + GFP_KERNEL); + if (!per_time_gains[i]) { + kfree(per_time_scales[i]); + goto err_free_out; + } + + for (j = 0; j < gts->num_hwgain; j++) + per_time_gains[i][j] = gts->hwgain_table[j].gain * + gts->itime_table[i].mul; + } + + ret = gain_to_scaletables(gts, per_time_gains, per_time_scales); + if (ret) + goto err_free_out; + + kfree(per_time_gains); + gts->per_time_avail_scale_tables = per_time_scales; + + return 0; + +err_free_out: + for (i--; i; i--) { + kfree(per_time_scales[i]); + kfree(per_time_gains[i]); + } + kfree(per_time_scales); +free_gains: + kfree(per_time_gains); + + return ret; +} + +/** + * iio_gts_build_avail_time_table - build table of available integration times + * @gts: Gain time scale descriptor + * + * Build the table which can represent the available times to be returned + * to users using the read_avail-callback. + * + * NOTE: Space allocated for the tables must be freed using + * iio_gts_purge_avail_time_table() when the tables are no longer needed. + * + * Return: 0 on success. + */ +static int iio_gts_build_avail_time_table(struct iio_gts *gts) +{ + int *times, i, j, idx = 0; + + if (!gts->num_itime) + return 0; + + times = kcalloc(gts->num_itime, sizeof(int), GFP_KERNEL); + if (!times) + return -ENOMEM; + + /* Sort times from all tables to one and remove duplicates */ + for (i = gts->num_itime - 1; i >= 0; i--) { + int new = gts->itime_table[i].time_us; + + if (times[idx] < new) { + times[idx++] = new; + continue; + } + + for (j = 0; j <= idx; j++) { + if (times[j] > new) { + memmove(×[j + 1], ×[j], + (idx - j) * sizeof(int)); + times[j] = new; + idx++; + } + } + } + gts->avail_time_tables = times; + /* + * This is just to survive a unlikely corner-case where times in the + * given time table were not unique. Else we could just trust the + * gts->num_itime. + */ + gts->num_avail_time_tables = idx; + + return 0; +} + +/** + * iio_gts_purge_avail_time_table - free-up the available integration time table + * @gts: Gain time scale descriptor + * + * Free the space reserved by iio_gts_build_avail_time_table(). + */ +static void iio_gts_purge_avail_time_table(struct iio_gts *gts) +{ + if (gts->num_avail_time_tables) { + kfree(gts->avail_time_tables); + gts->avail_time_tables = NULL; + gts->num_avail_time_tables = 0; + } +} + +/** + * iio_gts_build_avail_tables - create tables of available scales and int times + * @gts: Gain time scale descriptor + * + * Build the tables which can represent the available scales and available + * integration times. Availability tables are built based on the originally + * given gain and given time tables. + * + * When both time and gain tables are + * given this results: + * 1. A set of sorted tables representing available scales for each supported + * integration time. + * 2. A single sorted table listing all the unique scales that any combination + * of supported gains and times can provide. + * 3. A sorted table of supported integration times + * + * After these tables are built one can use the iio_gts_all_avail_scales(), + * iio_gts_avail_scales_for_time() and iio_gts_avail_times() helpers to + * implement the read_avail operations. + * + * NOTE: Space allocated for the tables must be freed using + * iio_gts_purge_avail_tables() when the tables are no longer needed. + * + * Return: 0 on success. + */ +static int iio_gts_build_avail_tables(struct iio_gts *gts) +{ + int ret; + + ret = iio_gts_build_avail_scale_table(gts); + if (ret) + return ret; + + ret = iio_gts_build_avail_time_table(gts); + if (ret) + iio_gts_purge_avail_scale_table(gts); + + return ret; +} + +/** + * iio_gts_purge_avail_tables - free-up the availability tables + * @gts: Gain time scale descriptor + * + * Free the space reserved by iio_gts_build_avail_tables(). Frees both the + * integration time and scale tables. + */ +static void iio_gts_purge_avail_tables(struct iio_gts *gts) +{ + iio_gts_purge_avail_time_table(gts); + iio_gts_purge_avail_scale_table(gts); +} + +static void devm_iio_gts_avail_all_drop(void *res) +{ + iio_gts_purge_avail_tables(res); +} + +/** + * devm_iio_gts_build_avail_tables - manged add availability tables + * @dev: Pointer to the device whose lifetime tables are bound + * @gts: Gain time scale descriptor + * + * Build the tables which can represent the available scales and available + * integration times. Availability tables are built based on the originally + * given gain and given time tables. + * + * When both time and gain tables are given this results: + * 1. A set of sorted tables representing available scales for each supported + * integration time. + * 2. A single sorted table listing all the unique scales that any combination + * of supported gains and times can provide. + * 3. A sorted table of supported integration times + * + * After these tables are built one can use the iio_gts_all_avail_scales(), + * iio_gts_avail_scales_for_time() and iio_gts_avail_times() helpers to + * implement the read_avail operations. + * + * The tables are automatically released upon device detach. + * + * Return: 0 on success. + */ +static int devm_iio_gts_build_avail_tables(struct device *dev, + struct iio_gts *gts) +{ + int ret; + + ret = iio_gts_build_avail_tables(gts); + if (ret) + return ret; + + return devm_add_action_or_reset(dev, devm_iio_gts_avail_all_drop, gts); +} + +static int sanity_check_time(const struct iio_itime_sel_mul *t) +{ + if (t->sel < 0 || t->time_us < 0 || t->mul <= 0) + return -EINVAL; + + return 0; +} + +static int sanity_check_gain(const struct iio_gain_sel_pair *g) +{ + if (g->sel < 0 || g->gain <= 0) + return -EINVAL; + + return 0; +} + +static int iio_gts_sanity_check(struct iio_gts *gts) +{ + int g, t, ret; + + if (!gts->num_hwgain && !gts->num_itime) + return -EINVAL; + + for (t = 0; t < gts->num_itime; t++) { + ret = sanity_check_time(>s->itime_table[t]); + if (ret) + return ret; + } + + for (g = 0; g < gts->num_hwgain; g++) { + ret = sanity_check_gain(>s->hwgain_table[g]); + if (ret) + return ret; + } + + for (g = 0; g < gts->num_hwgain; g++) { + for (t = 0; t < gts->num_itime; t++) { + int gain, mul, res; + + gain = gts->hwgain_table[g].gain; + mul = gts->itime_table[t].mul; + + if (check_mul_overflow(gain, mul, &res)) + return -EOVERFLOW; + } + } + + return 0; +} + +static int iio_init_iio_gts(int max_scale_int, int max_scale_nano, + const struct iio_gain_sel_pair *gain_tbl, int num_gain, + const struct iio_itime_sel_mul *tim_tbl, int num_times, + struct iio_gts *gts) +{ + int ret; + + memset(gts, 0, sizeof(*gts)); + + ret = iio_gts_linearize(max_scale_int, max_scale_nano, NANO, + >s->max_scale); + if (ret) + return ret; + + gts->hwgain_table = gain_tbl; + gts->num_hwgain = num_gain; + gts->itime_table = tim_tbl; + gts->num_itime = num_times; + + return iio_gts_sanity_check(gts); +} + +/** + * devm_iio_init_iio_gts - Initialize the gain-time-scale helper + * @dev: Pointer to the device whose lifetime gts resources are + * bound + * @max_scale_int: integer part of the maximum scale value + * @max_scale_nano: fraction part of the maximum scale value + * @gain_tbl: table describing supported gains + * @num_gain: number of gains in the gain table + * @tim_tbl: table describing supported integration times. Provide + * the integration time table sorted so that the preferred + * integration time is in the first array index. The search + * functions like the + * iio_gts_find_time_and_gain_sel_for_scale() start search + * from first provided time. + * @num_times: number of times in the time table + * @gts: pointer to the helper struct + * + * Initialize the gain-time-scale helper for use. Note, gains, times, selectors + * and multipliers must be positive. Negative values are reserved for error + * checking. The total gain (maximum gain * maximum time multiplier) must not + * overflow int. The allocated resources will be released upon device detach. + * + * Return: 0 on success. + */ +int devm_iio_init_iio_gts(struct device *dev, int max_scale_int, int max_scale_nano, + const struct iio_gain_sel_pair *gain_tbl, int num_gain, + const struct iio_itime_sel_mul *tim_tbl, int num_times, + struct iio_gts *gts) +{ + int ret; + + ret = iio_init_iio_gts(max_scale_int, max_scale_nano, gain_tbl, + num_gain, tim_tbl, num_times, gts); + if (ret) + return ret; + + return devm_iio_gts_build_avail_tables(dev, gts); +} +EXPORT_SYMBOL_NS_GPL(devm_iio_init_iio_gts, IIO_GTS_HELPER); + +/** + * iio_gts_all_avail_scales - helper for listing all available scales + * @gts: Gain time scale descriptor + * @vals: Returned array of supported scales + * @type: Type of returned scale values + * @length: Amount of returned values in array + * + * Return: a value suitable to be returned from read_avail or a negative error. + */ +int iio_gts_all_avail_scales(struct iio_gts *gts, const int **vals, int *type, + int *length) +{ + if (!gts->num_avail_all_scales) + return -EINVAL; + + *vals = gts->avail_all_scales_table; + *type = IIO_VAL_INT_PLUS_NANO; + *length = gts->num_avail_all_scales * 2; + + return IIO_AVAIL_LIST; +} +EXPORT_SYMBOL_NS_GPL(iio_gts_all_avail_scales, IIO_GTS_HELPER); + +/** + * iio_gts_avail_scales_for_time - list scales for integration time + * @gts: Gain time scale descriptor + * @time: Integration time for which the scales are listed + * @vals: Returned array of supported scales + * @type: Type of returned scale values + * @length: Amount of returned values in array + * + * Drivers which do not allow scale setting to change integration time can + * use this helper to list only the scales which are valid for given integration + * time. + * + * Return: a value suitable to be returned from read_avail or a negative error. + */ +int iio_gts_avail_scales_for_time(struct iio_gts *gts, int time, + const int **vals, int *type, int *length) +{ + int i; + + for (i = 0; i < gts->num_itime; i++) + if (gts->itime_table[i].time_us == time) + break; + + if (i == gts->num_itime) + return -EINVAL; + + *vals = gts->per_time_avail_scale_tables[i]; + *type = IIO_VAL_INT_PLUS_NANO; + *length = gts->num_hwgain * 2; + + return IIO_AVAIL_LIST; +} +EXPORT_SYMBOL_NS_GPL(iio_gts_avail_scales_for_time, IIO_GTS_HELPER); + +/** + * iio_gts_avail_times - helper for listing available integration times + * @gts: Gain time scale descriptor + * @vals: Returned array of supported times + * @type: Type of returned scale values + * @length: Amount of returned values in array + * + * Return: a value suitable to be returned from read_avail or a negative error. + */ +int iio_gts_avail_times(struct iio_gts *gts, const int **vals, int *type, + int *length) +{ + if (!gts->num_avail_time_tables) + return -EINVAL; + + *vals = gts->avail_time_tables; + *type = IIO_VAL_INT; + *length = gts->num_avail_time_tables; + + return IIO_AVAIL_LIST; +} +EXPORT_SYMBOL_NS_GPL(iio_gts_avail_times, IIO_GTS_HELPER); + +/** + * iio_gts_find_sel_by_gain - find selector corresponding to a HW-gain + * @gts: Gain time scale descriptor + * @gain: HW-gain for which matching selector is searched for + * + * Return: a selector matching given HW-gain or -EINVAL if selector was + * not found. + */ +int iio_gts_find_sel_by_gain(struct iio_gts *gts, int gain) +{ + int i; + + for (i = 0; i < gts->num_hwgain; i++) + if (gts->hwgain_table[i].gain == gain) + return gts->hwgain_table[i].sel; + + return -EINVAL; +} +EXPORT_SYMBOL_NS_GPL(iio_gts_find_sel_by_gain, IIO_GTS_HELPER); + +/** + * iio_gts_find_gain_by_sel - find HW-gain corresponding to a selector + * @gts: Gain time scale descriptor + * @sel: selector for which matching HW-gain is searched for + * + * Return: a HW-gain matching given selector or -EINVAL if HW-gain was not + * found. + */ +int iio_gts_find_gain_by_sel(struct iio_gts *gts, int sel) +{ + int i; + + for (i = 0; i < gts->num_hwgain; i++) + if (gts->hwgain_table[i].sel == sel) + return gts->hwgain_table[i].gain; + + return -EINVAL; +} +EXPORT_SYMBOL_NS_GPL(iio_gts_find_gain_by_sel, IIO_GTS_HELPER); + +/** + * iio_gts_get_min_gain - find smallest valid HW-gain + * @gts: Gain time scale descriptor + * + * Return: The smallest HW-gain -EINVAL if no HW-gains were in the tables. + */ +int iio_gts_get_min_gain(struct iio_gts *gts) +{ + int i, min = -EINVAL; + + for (i = 0; i < gts->num_hwgain; i++) { + int gain = gts->hwgain_table[i].gain; + + if (min == -EINVAL) + min = gain; + else + min = min(min, gain); + } + + return min; +} +EXPORT_SYMBOL_NS_GPL(iio_gts_get_min_gain, IIO_GTS_HELPER); + +/** + * iio_find_closest_gain_low - Find the closest lower matching gain + * @gts: Gain time scale descriptor + * @gain: HW-gain for which the closest match is searched + * @in_range: indicate if the @gain was actually in the range of + * supported gains. + * + * Search for closest supported gain that is lower than or equal to the + * gain given as a parameter. This is usable for drivers which do not require + * user to request exact matching gain but rather for rounding to a supported + * gain value which is equal or lower (setting lower gain is typical for + * avoiding saturation) + * + * Return: The closest matching supported gain or -EINVAL if @gain + * was smaller than the smallest supported gain. + */ +int iio_find_closest_gain_low(struct iio_gts *gts, int gain, bool *in_range) +{ + int i, diff = 0; + int best = -1; + + *in_range = false; + + for (i = 0; i < gts->num_hwgain; i++) { + if (gain == gts->hwgain_table[i].gain) { + *in_range = true; + return gain; + } + + if (gain > gts->hwgain_table[i].gain) { + if (!diff) { + diff = gain - gts->hwgain_table[i].gain; + best = i; + } else { + int tmp = gain - gts->hwgain_table[i].gain; + + if (tmp < diff) { + diff = tmp; + best = i; + } + } + } else { + /* + * We found valid HW-gain which is greater than + * reference. So, unless we return a failure below we + * will have found an in-range gain + */ + *in_range = true; + } + } + /* The requested gain was smaller than anything we support */ + if (!diff) { + *in_range = false; + + return -EINVAL; + } + + return gts->hwgain_table[best].gain; +} +EXPORT_SYMBOL_NS_GPL(iio_find_closest_gain_low, IIO_GTS_HELPER); + +static int iio_gts_get_int_time_gain_multiplier_by_sel(struct iio_gts *gts, + int sel) +{ + const struct iio_itime_sel_mul *time; + + time = iio_gts_find_itime_by_sel(gts, sel); + if (!time) + return -EINVAL; + + return time->mul; +} + +/** + * iio_gts_find_gain_for_scale_using_time - Find gain by time and scale + * @gts: Gain time scale descriptor + * @time_sel: Integration time selector corresponding to the time gain is + * searched for + * @scale_int: Integral part of the scale (typically val1) + * @scale_nano: Fractional part of the scale (nano or ppb) + * @gain: Pointer to value where gain is stored. + * + * In some cases the light sensors may want to find a gain setting which + * corresponds given scale and integration time. Sensors which fill the + * gain and time tables may use this helper to retrieve the gain. + * + * Return: 0 on success. -EINVAL if gain matching the parameters is not + * found. + */ +static int iio_gts_find_gain_for_scale_using_time(struct iio_gts *gts, int time_sel, + int scale_int, int scale_nano, + int *gain) +{ + u64 scale_linear; + int ret, mul; + + ret = iio_gts_linearize(scale_int, scale_nano, NANO, &scale_linear); + if (ret) + return ret; + + ret = iio_gts_get_int_time_gain_multiplier_by_sel(gts, time_sel); + if (ret < 0) + return ret; + + mul = ret; + + ret = gain_get_scale_fraction(gts->max_scale, scale_linear, mul, gain); + if (ret) + return ret; + + if (!iio_gts_valid_gain(gts, *gain)) + return -EINVAL; + + return 0; +} + +/** + * iio_gts_find_gain_sel_for_scale_using_time - Fetch gain selector. + * @gts: Gain time scale descriptor + * @time_sel: Integration time selector corresponding to the time gain is + * searched for + * @scale_int: Integral part of the scale (typically val1) + * @scale_nano: Fractional part of the scale (nano or ppb) + * @gain_sel: Pointer to value where gain selector is stored. + * + * See iio_gts_find_gain_for_scale_using_time() for more information + */ +int iio_gts_find_gain_sel_for_scale_using_time(struct iio_gts *gts, int time_sel, + int scale_int, int scale_nano, + int *gain_sel) +{ + int gain, ret; + + ret = iio_gts_find_gain_for_scale_using_time(gts, time_sel, scale_int, + scale_nano, &gain); + if (ret) + return ret; + + ret = iio_gts_find_sel_by_gain(gts, gain); + if (ret < 0) + return ret; + + *gain_sel = ret; + + return 0; +} +EXPORT_SYMBOL_NS_GPL(iio_gts_find_gain_sel_for_scale_using_time, IIO_GTS_HELPER); + +static int iio_gts_get_total_gain(struct iio_gts *gts, int gain, int time) +{ + const struct iio_itime_sel_mul *itime; + + if (!iio_gts_valid_gain(gts, gain)) + return -EINVAL; + + if (!gts->num_itime) + return gain; + + itime = iio_gts_find_itime_by_time(gts, time); + if (!itime) + return -EINVAL; + + return gain * itime->mul; +} + +static int iio_gts_get_scale_linear(struct iio_gts *gts, int gain, int time, + u64 *scale) +{ + int total_gain; + u64 tmp; + + total_gain = iio_gts_get_total_gain(gts, gain, time); + if (total_gain < 0) + return total_gain; + + tmp = gts->max_scale; + + do_div(tmp, total_gain); + + *scale = tmp; + + return 0; +} + +/** + * iio_gts_get_scale - get scale based on integration time and HW-gain + * @gts: Gain time scale descriptor + * @gain: HW-gain for which the scale is computed + * @time: Integration time for which the scale is computed + * @scale_int: Integral part of the scale (typically val1) + * @scale_nano: Fractional part of the scale (nano or ppb) + * + * Compute scale matching the integration time and HW-gain given as parameter. + * + * Return: 0 on success. + */ +int iio_gts_get_scale(struct iio_gts *gts, int gain, int time, int *scale_int, + int *scale_nano) +{ + u64 lin_scale; + int ret; + + ret = iio_gts_get_scale_linear(gts, gain, time, &lin_scale); + if (ret) + return ret; + + return iio_gts_delinearize(lin_scale, NANO, scale_int, scale_nano); +} +EXPORT_SYMBOL_NS_GPL(iio_gts_get_scale, IIO_GTS_HELPER); + +/** + * iio_gts_find_new_gain_sel_by_old_gain_time - compensate for time change + * @gts: Gain time scale descriptor + * @old_gain: Previously set gain + * @old_time_sel: Selector corresponding previously set time + * @new_time_sel: Selector corresponding new time to be set + * @new_gain: Pointer to value where new gain is to be written + * + * We may want to mitigate the scale change caused by setting a new integration + * time (for a light sensor) by also updating the (HW)gain. This helper computes + * new gain value to maintain the scale with new integration time. + * + * Return: 0 if an exactly matching supported new gain was found. When a + * non-zero value is returned, the @new_gain will be set to a negative or + * positive value. The negative value means that no gain could be computed. + * Positive value will be the "best possible new gain there could be". There + * can be two reasons why finding the "best possible" new gain is not deemed + * successful. 1) This new value cannot be supported by the hardware. 2) The new + * gain required to maintain the scale would not be an integer. In this case, + * the "best possible" new gain will be a floored optimal gain, which may or + * may not be supported by the hardware. + */ +int iio_gts_find_new_gain_sel_by_old_gain_time(struct iio_gts *gts, + int old_gain, int old_time_sel, + int new_time_sel, int *new_gain) +{ + const struct iio_itime_sel_mul *itime_old, *itime_new; + u64 scale; + int ret; + + *new_gain = -1; + + itime_old = iio_gts_find_itime_by_sel(gts, old_time_sel); + if (!itime_old) + return -EINVAL; + + itime_new = iio_gts_find_itime_by_sel(gts, new_time_sel); + if (!itime_new) + return -EINVAL; + + ret = iio_gts_get_scale_linear(gts, old_gain, itime_old->time_us, + &scale); + if (ret) + return ret; + + ret = gain_get_scale_fraction(gts->max_scale, scale, itime_new->mul, + new_gain); + if (ret) + return ret; + + if (!iio_gts_valid_gain(gts, *new_gain)) + return -EINVAL; + + return 0; +} +EXPORT_SYMBOL_NS_GPL(iio_gts_find_new_gain_sel_by_old_gain_time, IIO_GTS_HELPER); + +/** + * iio_gts_find_new_gain_by_old_gain_time - compensate for time change + * @gts: Gain time scale descriptor + * @old_gain: Previously set gain + * @old_time: Selector corresponding previously set time + * @new_time: Selector corresponding new time to be set + * @new_gain: Pointer to value where new gain is to be written + * + * We may want to mitigate the scale change caused by setting a new integration + * time (for a light sensor) by also updating the (HW)gain. This helper computes + * new gain value to maintain the scale with new integration time. + * + * Return: 0 if an exactly matching supported new gain was found. When a + * non-zero value is returned, the @new_gain will be set to a negative or + * positive value. The negative value means that no gain could be computed. + * Positive value will be the "best possible new gain there could be". There + * can be two reasons why finding the "best possible" new gain is not deemed + * successful. 1) This new value cannot be supported by the hardware. 2) The new + * gain required to maintain the scale would not be an integer. In this case, + * the "best possible" new gain will be a floored optimal gain, which may or + * may not be supported by the hardware. + */ +int iio_gts_find_new_gain_by_old_gain_time(struct iio_gts *gts, int old_gain, + int old_time, int new_time, + int *new_gain) +{ + const struct iio_itime_sel_mul *itime_new; + u64 scale; + int ret; + + *new_gain = -1; + + itime_new = iio_gts_find_itime_by_time(gts, new_time); + if (!itime_new) + return -EINVAL; + + ret = iio_gts_get_scale_linear(gts, old_gain, old_time, &scale); + if (ret) + return ret; + + ret = gain_get_scale_fraction(gts->max_scale, scale, itime_new->mul, + new_gain); + if (ret) + return ret; + + if (!iio_gts_valid_gain(gts, *new_gain)) + return -EINVAL; + + return 0; +} +EXPORT_SYMBOL_NS_GPL(iio_gts_find_new_gain_by_old_gain_time, IIO_GTS_HELPER); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Matti Vaittinen <mazziesaccount@gmail.com>"); +MODULE_DESCRIPTION("IIO light sensor gain-time-scale helpers"); diff --git a/drivers/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c index a2f3cc2f65ef..784dc1e00310 100644 --- a/drivers/iio/industrialio-trigger.c +++ b/drivers/iio/industrialio-trigger.c @@ -192,6 +192,12 @@ static void iio_trigger_notify_done_atomic(struct iio_trigger *trig) schedule_work(&trig->reenable_work); } +/** + * iio_trigger_poll() - Call the IRQ trigger handler of the consumers + * @trig: trigger which occurred + * + * This function should only be called from a hard IRQ context. + */ void iio_trigger_poll(struct iio_trigger *trig) { int i; @@ -216,7 +222,14 @@ irqreturn_t iio_trigger_generic_data_rdy_poll(int irq, void *private) } EXPORT_SYMBOL(iio_trigger_generic_data_rdy_poll); -void iio_trigger_poll_chained(struct iio_trigger *trig) +/** + * iio_trigger_poll_nested() - Call the threaded trigger handler of the + * consumers + * @trig: trigger which occurred + * + * This function should only be called from a kernel thread context. + */ +void iio_trigger_poll_nested(struct iio_trigger *trig) { int i; @@ -231,7 +244,7 @@ void iio_trigger_poll_chained(struct iio_trigger *trig) } } } -EXPORT_SYMBOL(iio_trigger_poll_chained); +EXPORT_SYMBOL(iio_trigger_poll_nested); void iio_trigger_notify_done(struct iio_trigger *trig) { diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index 0d4447df7200..6fa31fcd71a1 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -289,6 +289,20 @@ config JSA1212 To compile this driver as a module, choose M here: the module will be called jsa1212. +config ROHM_BU27034 + tristate "ROHM BU27034 ambient light sensor" + depends on I2C + select REGMAP_I2C + select IIO_GTS_HELPER + select IIO_BUFFER + select IIO_KFIFO_BUF + help + Enable support for the ROHM BU27034 ambient light sensor. ROHM BU27034 + is an ambient light sesnor with 3 channels and 3 photo diodes capable + of detecting a very wide range of illuminance. + Typical application is adjusting LCD and backlight power of TVs and + mobile phones. + config RPR0521 tristate "ROHM RPR0521 ALS and proximity sensor driver" depends on I2C diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile index d74d2b5ff14c..985f6feaccd4 100644 --- a/drivers/iio/light/Makefile +++ b/drivers/iio/light/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_MAX44009) += max44009.o obj-$(CONFIG_NOA1305) += noa1305.o obj-$(CONFIG_OPT3001) += opt3001.o obj-$(CONFIG_PA12203001) += pa12203001.o +obj-$(CONFIG_ROHM_BU27034) += rohm-bu27034.o obj-$(CONFIG_RPR0521) += rpr0521.o obj-$(CONFIG_SI1133) += si1133.o obj-$(CONFIG_SI1145) += si1145.o diff --git a/drivers/iio/light/acpi-als.c b/drivers/iio/light/acpi-als.c index e1ff6f524f4b..2d91caf24dd0 100644 --- a/drivers/iio/light/acpi-als.c +++ b/drivers/iio/light/acpi-als.c @@ -108,7 +108,7 @@ static void acpi_als_notify(struct acpi_device *device, u32 event) if (iio_buffer_enabled(indio_dev) && iio_trigger_using_own(indio_dev)) { switch (event) { case ACPI_ALS_NOTIFY_ILLUMINANCE: - iio_trigger_poll_chained(als->trig); + iio_trigger_poll_nested(als->trig); break; default: /* Unhandled event */ diff --git a/drivers/iio/light/max44009.c b/drivers/iio/light/max44009.c index 3dadace09fe2..176dcad6e8e8 100644 --- a/drivers/iio/light/max44009.c +++ b/drivers/iio/light/max44009.c @@ -527,6 +527,12 @@ static int max44009_probe(struct i2c_client *client) return devm_iio_device_register(&client->dev, indio_dev); } +static const struct of_device_id max44009_of_match[] = { + { .compatible = "maxim,max44009" }, + { } +}; +MODULE_DEVICE_TABLE(of, max44009_of_match); + static const struct i2c_device_id max44009_id[] = { { "max44009", 0 }, { } @@ -536,18 +542,13 @@ MODULE_DEVICE_TABLE(i2c, max44009_id); static struct i2c_driver max44009_driver = { .driver = { .name = MAX44009_DRV_NAME, + .of_match_table = max44009_of_match, }, .probe_new = max44009_probe, .id_table = max44009_id, }; module_i2c_driver(max44009_driver); -static const struct of_device_id max44009_of_match[] = { - { .compatible = "maxim,max44009" }, - { } -}; -MODULE_DEVICE_TABLE(of, max44009_of_match); - MODULE_AUTHOR("Robert Eshleman <bobbyeshleman@gmail.com>"); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("MAX44009 ambient light sensor driver"); diff --git a/drivers/iio/light/rohm-bu27034.c b/drivers/iio/light/rohm-bu27034.c new file mode 100644 index 000000000000..e486dcf35eba --- /dev/null +++ b/drivers/iio/light/rohm-bu27034.c @@ -0,0 +1,1497 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * BU27034 ROHM Ambient Light Sensor + * + * Copyright (c) 2023, ROHM Semiconductor. + * https://fscdn.rohm.com/en/products/databook/datasheet/ic/sensor/light/bu27034nuc-e.pdf + */ + +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/property.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/units.h> + +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/iio-gts-helper.h> +#include <linux/iio/kfifo_buf.h> + +#define BU27034_REG_SYSTEM_CONTROL 0x40 +#define BU27034_MASK_SW_RESET BIT(7) +#define BU27034_MASK_PART_ID GENMASK(5, 0) +#define BU27034_ID 0x19 +#define BU27034_REG_MODE_CONTROL1 0x41 +#define BU27034_MASK_MEAS_MODE GENMASK(2, 0) + +#define BU27034_REG_MODE_CONTROL2 0x42 +#define BU27034_MASK_D01_GAIN GENMASK(7, 3) +#define BU27034_MASK_D2_GAIN_HI GENMASK(7, 6) +#define BU27034_MASK_D2_GAIN_LO GENMASK(2, 0) + +#define BU27034_REG_MODE_CONTROL3 0x43 +#define BU27034_REG_MODE_CONTROL4 0x44 +#define BU27034_MASK_MEAS_EN BIT(0) +#define BU27034_MASK_VALID BIT(7) +#define BU27034_REG_DATA0_LO 0x50 +#define BU27034_REG_DATA1_LO 0x52 +#define BU27034_REG_DATA2_LO 0x54 +#define BU27034_REG_DATA2_HI 0x55 +#define BU27034_REG_MANUFACTURER_ID 0x92 +#define BU27034_REG_MAX BU27034_REG_MANUFACTURER_ID + +/* + * The BU27034 does not have interrupt to trigger the data read when a + * measurement has finished. Hence we poll the VALID bit in a thread. We will + * try to wake the thread BU27034_MEAS_WAIT_PREMATURE_MS milliseconds before + * the expected sampling time to prevent the drifting. + * + * If we constantly wake up a bit too late we would eventually skip a sample. + * And because the sleep can't wake up _exactly_ at given time this would be + * inevitable even if the sensor clock would be perfectly phase-locked to CPU + * clock - which we can't say is the case. + * + * This is still fragile. No matter how big advance do we have, we will still + * risk of losing a sample because things can in a rainy-day scenario be + * delayed a lot. Yet, more we reserve the time for polling, more we also lose + * the performance by spending cycles polling the register. So, selecting this + * value is a balancing dance between severity of wasting CPU time and severity + * of losing samples. + * + * In most cases losing the samples is not _that_ crucial because light levels + * tend to change slowly. + * + * Other option that was pointed to me would be always sleeping 1/2 of the + * measurement time, checking the VALID bit and just sleeping again if the bit + * was not set. That should be pretty tolerant against missing samples due to + * the scheduling delays while also not wasting much of cycles for polling. + * Downside is that the time-stamps would be very inaccurate as the wake-up + * would not really be tied to the sensor toggling the valid bit. This would also + * result 'jumps' in the time-stamps when the delay drifted so that wake-up was + * performed during the consecutive wake-ups (Or, when sensor and CPU clocks + * were very different and scheduling the wake-ups was very close to given + * timeout - and when the time-outs were very close to the actual sensor + * sampling, Eg. once in a blue moon, two consecutive time-outs would occur + * without having a sample ready). + */ +#define BU27034_MEAS_WAIT_PREMATURE_MS 5 +#define BU27034_DATA_WAIT_TIME_US 1000 +#define BU27034_TOTAL_DATA_WAIT_TIME_US (BU27034_MEAS_WAIT_PREMATURE_MS * 1000) + +#define BU27034_RETRY_LIMIT 18 + +enum { + BU27034_CHAN_ALS, + BU27034_CHAN_DATA0, + BU27034_CHAN_DATA1, + BU27034_CHAN_DATA2, + BU27034_NUM_CHANS +}; + +static const unsigned long bu27034_scan_masks[] = { + GENMASK(BU27034_CHAN_DATA2, BU27034_CHAN_ALS), 0 +}; + +/* + * Available scales with gain 1x - 4096x, timings 55, 100, 200, 400 mS + * Time impacts to gain: 1x, 2x, 4x, 8x. + * + * => Max total gain is HWGAIN * gain by integration time (8 * 4096) = 32768 + * + * Using NANO precision for scale we must use scale 64x corresponding gain 1x + * to avoid precision loss. (32x would result scale 976 562.5(nanos). + */ +#define BU27034_SCALE_1X 64 + +/* See the data sheet for the "Gain Setting" table */ +#define BU27034_GSEL_1X 0x00 /* 00000 */ +#define BU27034_GSEL_4X 0x08 /* 01000 */ +#define BU27034_GSEL_16X 0x0a /* 01010 */ +#define BU27034_GSEL_32X 0x0b /* 01011 */ +#define BU27034_GSEL_64X 0x0c /* 01100 */ +#define BU27034_GSEL_256X 0x18 /* 11000 */ +#define BU27034_GSEL_512X 0x19 /* 11001 */ +#define BU27034_GSEL_1024X 0x1a /* 11010 */ +#define BU27034_GSEL_2048X 0x1b /* 11011 */ +#define BU27034_GSEL_4096X 0x1c /* 11100 */ + +/* Available gain settings */ +static const struct iio_gain_sel_pair bu27034_gains[] = { + GAIN_SCALE_GAIN(1, BU27034_GSEL_1X), + GAIN_SCALE_GAIN(4, BU27034_GSEL_4X), + GAIN_SCALE_GAIN(16, BU27034_GSEL_16X), + GAIN_SCALE_GAIN(32, BU27034_GSEL_32X), + GAIN_SCALE_GAIN(64, BU27034_GSEL_64X), + GAIN_SCALE_GAIN(256, BU27034_GSEL_256X), + GAIN_SCALE_GAIN(512, BU27034_GSEL_512X), + GAIN_SCALE_GAIN(1024, BU27034_GSEL_1024X), + GAIN_SCALE_GAIN(2048, BU27034_GSEL_2048X), + GAIN_SCALE_GAIN(4096, BU27034_GSEL_4096X), +}; + +/* + * The IC has 5 modes for sampling time. 5 mS mode is exceptional as it limits + * the data collection to data0-channel only and cuts the supported range to + * 10 bit. It is not supported by the driver. + * + * "normal" modes are 55, 100, 200 and 400 mS modes - which do have direct + * multiplying impact to the register values (similar to gain). + * + * This means that if meas-mode is changed for example from 400 => 200, + * the scale is doubled. Eg, time impact to total gain is x1, x2, x4, x8. + */ +#define BU27034_MEAS_MODE_100MS 0 +#define BU27034_MEAS_MODE_55MS 1 +#define BU27034_MEAS_MODE_200MS 2 +#define BU27034_MEAS_MODE_400MS 4 + +static const struct iio_itime_sel_mul bu27034_itimes[] = { + GAIN_SCALE_ITIME_US(400000, BU27034_MEAS_MODE_400MS, 8), + GAIN_SCALE_ITIME_US(200000, BU27034_MEAS_MODE_200MS, 4), + GAIN_SCALE_ITIME_US(100000, BU27034_MEAS_MODE_100MS, 2), + GAIN_SCALE_ITIME_US(55000, BU27034_MEAS_MODE_55MS, 1), +}; + +#define BU27034_CHAN_DATA(_name, _ch2) \ +{ \ + .type = IIO_INTENSITY, \ + .channel = BU27034_CHAN_##_name, \ + .channel2 = (_ch2), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_separate_available = BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME), \ + .info_mask_shared_by_all_available = \ + BIT(IIO_CHAN_INFO_INT_TIME), \ + .address = BU27034_REG_##_name##_LO, \ + .scan_index = BU27034_CHAN_##_name, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_LE, \ + }, \ + .indexed = 1, \ +} + +static const struct iio_chan_spec bu27034_channels[] = { + { + .type = IIO_LIGHT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .channel = BU27034_CHAN_ALS, + .scan_index = BU27034_CHAN_ALS, + .scan_type = { + .sign = 'u', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_CPU, + }, + }, + /* + * The BU27034 DATA0 and DATA1 channels are both on the visible light + * area (mostly). The data0 sensitivity peaks at 500nm, DATA1 at 600nm. + * These wave lengths are pretty much on the border of colours making + * these a poor candidates for R/G/B standardization. Hence they're both + * marked as clear channels + */ + BU27034_CHAN_DATA(DATA0, IIO_MOD_LIGHT_CLEAR), + BU27034_CHAN_DATA(DATA1, IIO_MOD_LIGHT_CLEAR), + BU27034_CHAN_DATA(DATA2, IIO_MOD_LIGHT_IR), + IIO_CHAN_SOFT_TIMESTAMP(4), +}; + +struct bu27034_data { + struct regmap *regmap; + struct device *dev; + /* + * Protect gain and time during scale adjustment and data reading. + * Protect measurement enabling/disabling. + */ + struct mutex mutex; + struct iio_gts gts; + struct task_struct *task; + __le16 raw[3]; + struct { + u32 mlux; + __le16 channels[3]; + s64 ts __aligned(8); + } scan; +}; + +struct bu27034_result { + u16 ch0; + u16 ch1; + u16 ch2; +}; + +static const struct regmap_range bu27034_volatile_ranges[] = { + { + .range_min = BU27034_REG_MODE_CONTROL4, + .range_max = BU27034_REG_MODE_CONTROL4, + }, { + .range_min = BU27034_REG_DATA0_LO, + .range_max = BU27034_REG_DATA2_HI, + }, +}; + +static const struct regmap_access_table bu27034_volatile_regs = { + .yes_ranges = &bu27034_volatile_ranges[0], + .n_yes_ranges = ARRAY_SIZE(bu27034_volatile_ranges), +}; + +static const struct regmap_range bu27034_read_only_ranges[] = { + { + .range_min = BU27034_REG_DATA0_LO, + .range_max = BU27034_REG_DATA2_HI, + }, { + .range_min = BU27034_REG_MANUFACTURER_ID, + .range_max = BU27034_REG_MANUFACTURER_ID, + } +}; + +static const struct regmap_access_table bu27034_ro_regs = { + .no_ranges = &bu27034_read_only_ranges[0], + .n_no_ranges = ARRAY_SIZE(bu27034_read_only_ranges), +}; + +static const struct regmap_config bu27034_regmap = { + .reg_bits = 8, + .val_bits = 8, + .max_register = BU27034_REG_MAX, + .cache_type = REGCACHE_RBTREE, + .volatile_table = &bu27034_volatile_regs, + .wr_table = &bu27034_ro_regs, +}; + +struct bu27034_gain_check { + int old_gain; + int new_gain; + int chan; +}; + +static int bu27034_get_gain_sel(struct bu27034_data *data, int chan) +{ + int ret, val; + + switch (chan) { + case BU27034_CHAN_DATA0: + case BU27034_CHAN_DATA1: + { + int reg[] = { + [BU27034_CHAN_DATA0] = BU27034_REG_MODE_CONTROL2, + [BU27034_CHAN_DATA1] = BU27034_REG_MODE_CONTROL3, + }; + ret = regmap_read(data->regmap, reg[chan], &val); + if (ret) + return ret; + + return FIELD_GET(BU27034_MASK_D01_GAIN, val); + } + case BU27034_CHAN_DATA2: + { + int d2_lo_bits = fls(BU27034_MASK_D2_GAIN_LO); + + ret = regmap_read(data->regmap, BU27034_REG_MODE_CONTROL2, &val); + if (ret) + return ret; + + /* + * The data2 channel gain is composed by 5 non continuous bits + * [7:6], [2:0]. Thus when we combine the 5-bit 'selector' + * from register value we must right shift the high bits by 3. + */ + return FIELD_GET(BU27034_MASK_D2_GAIN_HI, val) << d2_lo_bits | + FIELD_GET(BU27034_MASK_D2_GAIN_LO, val); + } + default: + return -EINVAL; + } +} + +static int bu27034_get_gain(struct bu27034_data *data, int chan, int *gain) +{ + int ret, sel; + + ret = bu27034_get_gain_sel(data, chan); + if (ret < 0) + return ret; + + sel = ret; + + ret = iio_gts_find_gain_by_sel(&data->gts, sel); + if (ret < 0) { + dev_err(data->dev, "chan %u: unknown gain value 0x%x\n", chan, + sel); + + return ret; + } + + *gain = ret; + + return 0; +} + +static int bu27034_get_int_time(struct bu27034_data *data) +{ + int ret, sel; + + ret = regmap_read(data->regmap, BU27034_REG_MODE_CONTROL1, &sel); + if (ret) + return ret; + + return iio_gts_find_int_time_by_sel(&data->gts, + sel & BU27034_MASK_MEAS_MODE); +} + +static int _bu27034_get_scale(struct bu27034_data *data, int channel, int *val, + int *val2) +{ + int gain, ret; + + ret = bu27034_get_gain(data, channel, &gain); + if (ret) + return ret; + + ret = bu27034_get_int_time(data); + if (ret < 0) + return ret; + + return iio_gts_get_scale(&data->gts, gain, ret, val, val2); +} + +static int bu27034_get_scale(struct bu27034_data *data, int channel, int *val, + int *val2) +{ + int ret; + + if (channel == BU27034_CHAN_ALS) { + *val = 0; + *val2 = 1000; + return IIO_VAL_INT_PLUS_MICRO; + } + + mutex_lock(&data->mutex); + ret = _bu27034_get_scale(data, channel, val, val2); + mutex_unlock(&data->mutex); + if (ret) + return ret; + + return IIO_VAL_INT_PLUS_NANO; +} + +/* Caller should hold the lock to protect lux reading */ +static int bu27034_write_gain_sel(struct bu27034_data *data, int chan, int sel) +{ + static const int reg[] = { + [BU27034_CHAN_DATA0] = BU27034_REG_MODE_CONTROL2, + [BU27034_CHAN_DATA1] = BU27034_REG_MODE_CONTROL3, + }; + int mask, val; + + if (chan != BU27034_CHAN_DATA0 && chan != BU27034_CHAN_DATA1) + return -EINVAL; + + val = FIELD_PREP(BU27034_MASK_D01_GAIN, sel); + + mask = BU27034_MASK_D01_GAIN; + + if (chan == BU27034_CHAN_DATA0) { + /* + * We keep the same gain for channel 2 as we set for channel 0 + * We can't allow them to be individually controlled because + * setting one will impact also the other. Also, if we don't + * always update both gains we may result unsupported bit + * combinations. + * + * This is not nice but this is yet another place where the + * user space must be prepared to surprizes. Namely, see chan 2 + * gain changed when chan 0 gain is changed. + * + * This is not fatal for most users though. I don't expect the + * channel 2 to be used in any generic cases - the intensity + * values provided by the sensor for IR area are not openly + * documented. Also, channel 2 is not used for visible light. + * + * So, if there is application which is written to utilize the + * channel 2 - then it is probably specifically targeted to this + * sensor and knows how to utilize those values. It is safe to + * hope such user can also cope with the gain changes. + */ + mask |= BU27034_MASK_D2_GAIN_LO; + + /* + * The D2 gain bits are directly the lowest bits of selector. + * Just do add those bits to the value + */ + val |= sel & BU27034_MASK_D2_GAIN_LO; + } + + return regmap_update_bits(data->regmap, reg[chan], mask, val); +} + +static int bu27034_set_gain(struct bu27034_data *data, int chan, int gain) +{ + int ret; + + /* + * We don't allow setting channel 2 gain as it messes up the + * gain for channel 0 - which shares the high bits + */ + if (chan != BU27034_CHAN_DATA0 && chan != BU27034_CHAN_DATA1) + return -EINVAL; + + ret = iio_gts_find_sel_by_gain(&data->gts, gain); + if (ret < 0) + return ret; + + return bu27034_write_gain_sel(data, chan, ret); +} + +/* Caller should hold the lock to protect data->int_time */ +static int bu27034_set_int_time(struct bu27034_data *data, int time) +{ + int ret; + + ret = iio_gts_find_sel_by_int_time(&data->gts, time); + if (ret < 0) + return ret; + + return regmap_update_bits(data->regmap, BU27034_REG_MODE_CONTROL1, + BU27034_MASK_MEAS_MODE, ret); +} + +/* + * We try to change the time in such way that the scale is maintained for + * given channels by adjusting gain so that it compensates the time change. + */ +static int bu27034_try_set_int_time(struct bu27034_data *data, int time_us) +{ + struct bu27034_gain_check gains[] = { + { .chan = BU27034_CHAN_DATA0 }, + { .chan = BU27034_CHAN_DATA1 }, + }; + int numg = ARRAY_SIZE(gains); + int ret, int_time_old, i; + + mutex_lock(&data->mutex); + ret = bu27034_get_int_time(data); + if (ret < 0) + goto unlock_out; + + int_time_old = ret; + + if (!iio_gts_valid_time(&data->gts, time_us)) { + dev_err(data->dev, "Unsupported integration time %u\n", + time_us); + ret = -EINVAL; + + goto unlock_out; + } + + if (time_us == int_time_old) { + ret = 0; + goto unlock_out; + } + + for (i = 0; i < numg; i++) { + ret = bu27034_get_gain(data, gains[i].chan, &gains[i].old_gain); + if (ret) + goto unlock_out; + + ret = iio_gts_find_new_gain_by_old_gain_time(&data->gts, + gains[i].old_gain, + int_time_old, time_us, + &gains[i].new_gain); + if (ret) { + int scale1, scale2; + bool ok; + + _bu27034_get_scale(data, gains[i].chan, &scale1, &scale2); + dev_dbg(data->dev, + "chan %u, can't support time %u with scale %u %u\n", + gains[i].chan, time_us, scale1, scale2); + + if (gains[i].new_gain < 0) + goto unlock_out; + + /* + * If caller requests for integration time change and we + * can't support the scale - then the caller should be + * prepared to 'pick up the pieces and deal with the + * fact that the scale changed'. + */ + ret = iio_find_closest_gain_low(&data->gts, + gains[i].new_gain, &ok); + + if (!ok) + dev_dbg(data->dev, + "optimal gain out of range for chan %u\n", + gains[i].chan); + + if (ret < 0) { + dev_dbg(data->dev, + "Total gain increase. Risk of saturation"); + ret = iio_gts_get_min_gain(&data->gts); + if (ret < 0) + goto unlock_out; + } + dev_dbg(data->dev, "chan %u scale changed\n", + gains[i].chan); + gains[i].new_gain = ret; + dev_dbg(data->dev, "chan %u new gain %u\n", + gains[i].chan, gains[i].new_gain); + } + } + + for (i = 0; i < numg; i++) { + ret = bu27034_set_gain(data, gains[i].chan, gains[i].new_gain); + if (ret) + goto unlock_out; + } + + ret = bu27034_set_int_time(data, time_us); + +unlock_out: + mutex_unlock(&data->mutex); + + return ret; +} + +static int bu27034_set_scale(struct bu27034_data *data, int chan, + int val, int val2) +{ + int ret, time_sel, gain_sel, i; + bool found = false; + + if (chan == BU27034_CHAN_DATA2) + return -EINVAL; + + if (chan == BU27034_CHAN_ALS) { + if (val == 0 && val2 == 1000) + return 0; + + return -EINVAL; + } + + mutex_lock(&data->mutex); + ret = regmap_read(data->regmap, BU27034_REG_MODE_CONTROL1, &time_sel); + if (ret) + goto unlock_out; + + ret = iio_gts_find_gain_sel_for_scale_using_time(&data->gts, time_sel, + val, val2 * 1000, &gain_sel); + if (ret) { + /* + * Could not support scale with given time. Need to change time. + * We still want to maintain the scale for all channels + */ + struct bu27034_gain_check gain; + int new_time_sel; + + /* + * Populate information for the other channel which should also + * maintain the scale. (Due to the HW limitations the chan2 + * gets the same gain as chan0, so we only need to explicitly + * set the chan 0 and 1). + */ + if (chan == BU27034_CHAN_DATA0) + gain.chan = BU27034_CHAN_DATA1; + else if (chan == BU27034_CHAN_DATA1) + gain.chan = BU27034_CHAN_DATA0; + + ret = bu27034_get_gain(data, gain.chan, &gain.old_gain); + if (ret) + goto unlock_out; + + /* + * Iterate through all the times to see if we find one which + * can support requested scale for requested channel, while + * maintaining the scale for other channels + */ + for (i = 0; i < data->gts.num_itime; i++) { + new_time_sel = data->gts.itime_table[i].sel; + + if (new_time_sel == time_sel) + continue; + + /* Can we provide requested scale with this time? */ + ret = iio_gts_find_gain_sel_for_scale_using_time( + &data->gts, new_time_sel, val, val2 * 1000, + &gain_sel); + if (ret) + continue; + + /* Can the other channel(s) maintain scale? */ + ret = iio_gts_find_new_gain_sel_by_old_gain_time( + &data->gts, gain.old_gain, time_sel, + new_time_sel, &gain.new_gain); + if (!ret) { + /* Yes - we found suitable time */ + found = true; + break; + } + } + if (!found) { + dev_dbg(data->dev, + "Can't set scale maintaining other channels\n"); + ret = -EINVAL; + + goto unlock_out; + } + + ret = bu27034_set_gain(data, gain.chan, gain.new_gain); + if (ret) + goto unlock_out; + + ret = regmap_update_bits(data->regmap, BU27034_REG_MODE_CONTROL1, + BU27034_MASK_MEAS_MODE, new_time_sel); + if (ret) + goto unlock_out; + } + + ret = bu27034_write_gain_sel(data, chan, gain_sel); +unlock_out: + mutex_unlock(&data->mutex); + + return ret; +} + +/* + * for (D1/D0 < 0.87): + * lx = 0.004521097 * D1 - 0.002663996 * D0 + + * 0.00012213 * D1 * D1 / D0 + * + * => 115.7400832 * ch1 / gain1 / mt - + * 68.1982976 * ch0 / gain0 / mt + + * 0.00012213 * 25600 * (ch1 / gain1 / mt) * 25600 * + * (ch1 /gain1 / mt) / (25600 * ch0 / gain0 / mt) + * + * A = 0.00012213 * 25600 * (ch1 /gain1 / mt) * 25600 * + * (ch1 /gain1 / mt) / (25600 * ch0 / gain0 / mt) + * => 0.00012213 * 25600 * (ch1 /gain1 / mt) * + * (ch1 /gain1 / mt) / (ch0 / gain0 / mt) + * => 0.00012213 * 25600 * (ch1 / gain1) * (ch1 /gain1 / mt) / + * (ch0 / gain0) + * => 0.00012213 * 25600 * (ch1 / gain1) * (ch1 /gain1 / mt) * + * gain0 / ch0 + * => 3.126528 * ch1 * ch1 * gain0 / gain1 / gain1 / mt /ch0 + * + * lx = (115.7400832 * ch1 / gain1 - 68.1982976 * ch0 / gain0) / + * mt + A + * => (115.7400832 * ch1 / gain1 - 68.1982976 * ch0 / gain0) / + * mt + 3.126528 * ch1 * ch1 * gain0 / gain1 / gain1 / mt / + * ch0 + * + * => (115.7400832 * ch1 / gain1 - 68.1982976 * ch0 / gain0 + + * 3.126528 * ch1 * ch1 * gain0 / gain1 / gain1 / ch0) / + * mt + * + * For (0.87 <= D1/D0 < 1.00) + * lx = (0.001331* D0 + 0.0000354 * D1) * ((D1/D0 – 0.87) * (0.385) + 1) + * => (0.001331 * 256 * 100 * ch0 / gain0 / mt + 0.0000354 * 256 * + * 100 * ch1 / gain1 / mt) * ((D1/D0 - 0.87) * (0.385) + 1) + * => (34.0736 * ch0 / gain0 / mt + 0.90624 * ch1 / gain1 / mt) * + * ((D1/D0 - 0.87) * (0.385) + 1) + * => (34.0736 * ch0 / gain0 / mt + 0.90624 * ch1 / gain1 / mt) * + * (0.385 * D1/D0 - 0.66505) + * => (34.0736 * ch0 / gain0 / mt + 0.90624 * ch1 / gain1 / mt) * + * (0.385 * 256 * 100 * ch1 / gain1 / mt / (256 * 100 * ch0 / gain0 / mt) - 0.66505) + * => (34.0736 * ch0 / gain0 / mt + 0.90624 * ch1 / gain1 / mt) * + * (9856 * ch1 / gain1 / mt / (25600 * ch0 / gain0 / mt) + 0.66505) + * => 13.118336 * ch1 / (gain1 * mt) + * + 22.66064768 * ch0 / (gain0 * mt) + * + 8931.90144 * ch1 * ch1 * gain0 / + * (25600 * ch0 * gain1 * gain1 * mt) + * + 0.602694912 * ch1 / (gain1 * mt) + * + * => [0.3489024 * ch1 * ch1 * gain0 / (ch0 * gain1 * gain1) + * + 22.66064768 * ch0 / gain0 + * + 13.721030912 * ch1 / gain1 + * ] / mt + * + * For (D1/D0 >= 1.00) + * + * lx = (0.001331* D0 + 0.0000354 * D1) * ((D1/D0 – 2.0) * (-0.05) + 1) + * => (0.001331* D0 + 0.0000354 * D1) * (-0.05D1/D0 + 1.1) + * => (0.001331 * 256 * 100 * ch0 / gain0 / mt + 0.0000354 * 256 * + * 100 * ch1 / gain1 / mt) * (-0.05D1/D0 + 1.1) + * => (34.0736 * ch0 / gain0 / mt + 0.90624 * ch1 / gain1 / mt) * + * (-0.05 * 256 * 100 * ch1 / gain1 / mt / (256 * 100 * ch0 / gain0 / mt) + 1.1) + * => (34.0736 * ch0 / gain0 / mt + 0.90624 * ch1 / gain1 / mt) * + * (-1280 * ch1 / (gain1 * mt * 25600 * ch0 / gain0 / mt) + 1.1) + * => (34.0736 * ch0 * -1280 * ch1 * gain0 * mt /( gain0 * mt * gain1 * mt * 25600 * ch0) + * + 34.0736 * 1.1 * ch0 / (gain0 * mt) + * + 0.90624 * ch1 * -1280 * ch1 *gain0 * mt / (gain1 * mt *gain1 * mt * 25600 * ch0) + * + 1.1 * 0.90624 * ch1 / (gain1 * mt) + * => -43614.208 * ch1 / (gain1 * mt * 25600) + * + 37.48096 ch0 / (gain0 * mt) + * - 1159.9872 * ch1 * ch1 * gain0 / (gain1 * gain1 * mt * 25600 * ch0) + * + 0.996864 ch1 / (gain1 * mt) + * => [ + * - 0.045312 * ch1 * ch1 * gain0 / (gain1 * gain1 * ch0) + * - 0.706816 * ch1 / gain1 + * + 37.48096 ch0 /gain0 + * ] * mt + * + * + * So, the first case (D1/D0 < 0.87) can be computed to a form: + * + * lx = (3.126528 * ch1 * ch1 * gain0 / (ch0 * gain1 * gain1) + + * 115.7400832 * ch1 / gain1 + + * -68.1982976 * ch0 / gain0 + * / mt + * + * Second case (0.87 <= D1/D0 < 1.00) goes to form: + * + * => [0.3489024 * ch1 * ch1 * gain0 / (ch0 * gain1 * gain1) + + * 13.721030912 * ch1 / gain1 + + * 22.66064768 * ch0 / gain0 + * ] / mt + * + * Third case (D1/D0 >= 1.00) goes to form: + * => [-0.045312 * ch1 * ch1 * gain0 / (ch0 * gain1 * gain1) + + * -0.706816 * ch1 / gain1 + + * 37.48096 ch0 /(gain0 + * ] / mt + * + * This can be unified to format: + * lx = [ + * A * ch1 * ch1 * gain0 / (ch0 * gain1 * gain1) + + * B * ch1 / gain1 + + * C * ch0 / gain0 + * ] / mt + * + * For case 1: + * A = 3.126528, + * B = 115.7400832 + * C = -68.1982976 + * + * For case 2: + * A = 0.3489024 + * B = 13.721030912 + * C = 22.66064768 + * + * For case 3: + * A = -0.045312 + * B = -0.706816 + * C = 37.48096 + */ + +struct bu27034_lx_coeff { + unsigned int A; + unsigned int B; + unsigned int C; + /* Indicate which of the coefficients above are negative */ + bool is_neg[3]; +}; + +static inline u64 gain_mul_div_helper(u64 val, unsigned int gain, + unsigned int div) +{ + /* + * Max gain for a channel is 4096. The max u64 (0xffffffffffffffffULL) + * divided by 4096 is 0xFFFFFFFFFFFFF (GENMASK_ULL(51, 0)) (floored). + * Thus, the 0xFFFFFFFFFFFFF is the largest value we can safely multiply + * with the gain, no matter what gain is set. + * + * So, multiplication with max gain may overflow if val is greater than + * 0xFFFFFFFFFFFFF (52 bits set).. + * + * If this is the case we divide first. + */ + if (val < GENMASK_ULL(51, 0)) { + val *= gain; + do_div(val, div); + } else { + do_div(val, div); + val *= gain; + } + + return val; +} + +static u64 bu27034_fixp_calc_t1_64bit(unsigned int coeff, unsigned int ch0, + unsigned int ch1, unsigned int gain0, + unsigned int gain1) +{ + unsigned int helper; + u64 helper64; + + helper64 = (u64)coeff * (u64)ch1 * (u64)ch1; + + helper = gain1 * gain1; + if (helper > ch0) { + do_div(helper64, helper); + + return gain_mul_div_helper(helper64, gain0, ch0); + } + + do_div(helper64, ch0); + + return gain_mul_div_helper(helper64, gain0, helper); + +} + +static u64 bu27034_fixp_calc_t1(unsigned int coeff, unsigned int ch0, + unsigned int ch1, unsigned int gain0, + unsigned int gain1) +{ + unsigned int helper, tmp; + + /* + * Here we could overflow even the 64bit value. Hence we + * multiply with gain0 only after the divisions - even though + * it may result loss of accuracy + */ + helper = coeff * ch1 * ch1; + tmp = helper * gain0; + + helper = ch1 * ch1; + + if (check_mul_overflow(helper, coeff, &helper)) + return bu27034_fixp_calc_t1_64bit(coeff, ch0, ch1, gain0, gain1); + + if (check_mul_overflow(helper, gain0, &tmp)) + return bu27034_fixp_calc_t1_64bit(coeff, ch0, ch1, gain0, gain1); + + return tmp / (gain1 * gain1) / ch0; + +} + +static u64 bu27034_fixp_calc_t23(unsigned int coeff, unsigned int ch, + unsigned int gain) +{ + unsigned int helper; + u64 helper64; + + if (!check_mul_overflow(coeff, ch, &helper)) + return helper / gain; + + helper64 = (u64)coeff * (u64)ch; + do_div(helper64, gain); + + return helper64; +} + +static int bu27034_fixp_calc_lx(unsigned int ch0, unsigned int ch1, + unsigned int gain0, unsigned int gain1, + unsigned int meastime, int coeff_idx) +{ + static const struct bu27034_lx_coeff coeff[] = { + { + .A = 31265280, /* 3.126528 */ + .B = 1157400832, /*115.7400832 */ + .C = 681982976, /* -68.1982976 */ + .is_neg = {false, false, true}, + }, { + .A = 3489024, /* 0.3489024 */ + .B = 137210309, /* 13.721030912 */ + .C = 226606476, /* 22.66064768 */ + /* All terms positive */ + }, { + .A = 453120, /* -0.045312 */ + .B = 7068160, /* -0.706816 */ + .C = 374809600, /* 37.48096 */ + .is_neg = {true, true, false}, + } + }; + const struct bu27034_lx_coeff *c = &coeff[coeff_idx]; + u64 res = 0, terms[3]; + int i; + + if (coeff_idx >= ARRAY_SIZE(coeff)) + return -EINVAL; + + terms[0] = bu27034_fixp_calc_t1(c->A, ch0, ch1, gain0, gain1); + terms[1] = bu27034_fixp_calc_t23(c->B, ch1, gain1); + terms[2] = bu27034_fixp_calc_t23(c->C, ch0, gain0); + + /* First, add positive terms */ + for (i = 0; i < 3; i++) + if (!c->is_neg[i]) + res += terms[i]; + + /* No positive term => zero lux */ + if (!res) + return 0; + + /* Then, subtract negative terms (if any) */ + for (i = 0; i < 3; i++) + if (c->is_neg[i]) { + /* + * If the negative term is greater than positive - then + * the darkness has taken over and we are all doomed! Eh, + * I mean, then we can just return 0 lx and go out + */ + if (terms[i] >= res) + return 0; + + res -= terms[i]; + } + + meastime *= 10; + do_div(res, meastime); + + return (int) res; +} + +static bool bu27034_has_valid_sample(struct bu27034_data *data) +{ + int ret, val; + + ret = regmap_read(data->regmap, BU27034_REG_MODE_CONTROL4, &val); + if (ret) { + dev_err(data->dev, "Read failed %d\n", ret); + + return false; + } + + return val & BU27034_MASK_VALID; +} + +/* + * Reading the register where VALID bit is clears this bit. (So does changing + * any gain / integration time configuration registers) The bit gets + * set when we have acquired new data. We use this bit to indicate data + * validity. + */ +static void bu27034_invalidate_read_data(struct bu27034_data *data) +{ + bu27034_has_valid_sample(data); +} + +static int bu27034_read_result(struct bu27034_data *data, int chan, int *res) +{ + int reg[] = { + [BU27034_CHAN_DATA0] = BU27034_REG_DATA0_LO, + [BU27034_CHAN_DATA1] = BU27034_REG_DATA1_LO, + [BU27034_CHAN_DATA2] = BU27034_REG_DATA2_LO, + }; + int valid, ret; + __le16 val; + + ret = regmap_read_poll_timeout(data->regmap, BU27034_REG_MODE_CONTROL4, + valid, (valid & BU27034_MASK_VALID), + BU27034_DATA_WAIT_TIME_US, 0); + if (ret) + return ret; + + ret = regmap_bulk_read(data->regmap, reg[chan], &val, sizeof(val)); + if (ret) + return ret; + + *res = le16_to_cpu(val); + + return 0; +} + +static int bu27034_get_result_unlocked(struct bu27034_data *data, __le16 *res, + int size) +{ + int ret = 0, retry_cnt = 0; + +retry: + /* Get new value from sensor if data is ready */ + if (bu27034_has_valid_sample(data)) { + ret = regmap_bulk_read(data->regmap, BU27034_REG_DATA0_LO, + res, size); + if (ret) + return ret; + + bu27034_invalidate_read_data(data); + } else { + /* No new data in sensor. Wait and retry */ + retry_cnt++; + + if (retry_cnt > BU27034_RETRY_LIMIT) { + dev_err(data->dev, "No data from sensor\n"); + + return -ETIMEDOUT; + } + + msleep(25); + + goto retry; + } + + return ret; +} + +static int bu27034_meas_set(struct bu27034_data *data, bool en) +{ + if (en) + return regmap_set_bits(data->regmap, BU27034_REG_MODE_CONTROL4, + BU27034_MASK_MEAS_EN); + + return regmap_clear_bits(data->regmap, BU27034_REG_MODE_CONTROL4, + BU27034_MASK_MEAS_EN); +} + +static int bu27034_get_single_result(struct bu27034_data *data, int chan, + int *val) +{ + int ret; + + if (chan < BU27034_CHAN_DATA0 || chan > BU27034_CHAN_DATA2) + return -EINVAL; + + ret = bu27034_meas_set(data, true); + if (ret) + return ret; + + ret = bu27034_get_int_time(data); + if (ret < 0) + return ret; + + msleep(ret / 1000); + + return bu27034_read_result(data, chan, val); +} + +/* + * The formula given by vendor for computing luxes out of data0 and data1 + * (in open air) is as follows: + * + * Let's mark: + * D0 = data0/ch0_gain/meas_time_ms * 25600 + * D1 = data1/ch1_gain/meas_time_ms * 25600 + * + * Then: + * if (D1/D0 < 0.87) + * lx = (0.001331 * D0 + 0.0000354 * D1) * ((D1 / D0 - 0.87) * 3.45 + 1) + * else if (D1/D0 < 1) + * lx = (0.001331 * D0 + 0.0000354 * D1) * ((D1 / D0 - 0.87) * 0.385 + 1) + * else + * lx = (0.001331 * D0 + 0.0000354 * D1) * ((D1 / D0 - 2) * -0.05 + 1) + * + * We use it here. Users who have for example some colored lens + * need to modify the calculation but I hope this gives a starting point for + * those working with such devices. + */ + +static int bu27034_calc_mlux(struct bu27034_data *data, __le16 *res, int *val) +{ + unsigned int gain0, gain1, meastime; + unsigned int d1_d0_ratio_scaled; + u16 ch0, ch1; + u64 helper64; + int ret; + + /* + * We return 0 lux if calculation fails. This should be reasonably + * easy to spot from the buffers especially if raw-data channels show + * valid values + */ + *val = 0; + + ch0 = max_t(u16, 1, le16_to_cpu(res[0])); + ch1 = max_t(u16, 1, le16_to_cpu(res[1])); + + ret = bu27034_get_gain(data, BU27034_CHAN_DATA0, &gain0); + if (ret) + return ret; + + ret = bu27034_get_gain(data, BU27034_CHAN_DATA1, &gain1); + if (ret) + return ret; + + ret = bu27034_get_int_time(data); + if (ret < 0) + return ret; + + meastime = ret; + + d1_d0_ratio_scaled = (unsigned int)ch1 * (unsigned int)gain0 * 100; + helper64 = (u64)ch1 * (u64)gain0 * 100LLU; + + if (helper64 != d1_d0_ratio_scaled) { + unsigned int div = (unsigned int)ch0 * gain1; + + do_div(helper64, div); + d1_d0_ratio_scaled = helper64; + } else { + d1_d0_ratio_scaled /= ch0 * gain1; + } + + if (d1_d0_ratio_scaled < 87) + ret = bu27034_fixp_calc_lx(ch0, ch1, gain0, gain1, meastime, 0); + else if (d1_d0_ratio_scaled < 100) + ret = bu27034_fixp_calc_lx(ch0, ch1, gain0, gain1, meastime, 1); + else + ret = bu27034_fixp_calc_lx(ch0, ch1, gain0, gain1, meastime, 2); + + if (ret < 0) + return ret; + + *val = ret; + + return 0; + +} + +static int bu27034_get_mlux(struct bu27034_data *data, int chan, int *val) +{ + __le16 res[3]; + int ret; + + ret = bu27034_meas_set(data, true); + if (ret) + return ret; + + ret = bu27034_get_result_unlocked(data, &res[0], sizeof(res)); + if (ret) + return ret; + + ret = bu27034_calc_mlux(data, res, val); + if (ret) + return ret; + + ret = bu27034_meas_set(data, false); + if (ret) + dev_err(data->dev, "failed to disable measurement\n"); + + return 0; +} + +static int bu27034_read_raw(struct iio_dev *idev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct bu27034_data *data = iio_priv(idev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_INT_TIME: + *val = bu27034_get_int_time(data); + if (*val < 0) + return *val; + + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + return bu27034_get_scale(data, chan->channel, val, val2); + + case IIO_CHAN_INFO_RAW: + { + int (*result_get)(struct bu27034_data *data, int chan, int *val); + + if (chan->type == IIO_INTENSITY) + result_get = bu27034_get_single_result; + else if (chan->type == IIO_LIGHT) + result_get = bu27034_get_mlux; + else + return -EINVAL; + + /* Don't mess with measurement enabling while buffering */ + ret = iio_device_claim_direct_mode(idev); + if (ret) + return ret; + + mutex_lock(&data->mutex); + /* + * Reading one channel at a time is inefficient but we + * don't care here. Buffered version should be used if + * performance is an issue. + */ + ret = result_get(data, chan->channel, val); + + mutex_unlock(&data->mutex); + iio_device_release_direct_mode(idev); + + if (ret) + return ret; + + return IIO_VAL_INT; + } + default: + return -EINVAL; + } +} + +static int bu27034_write_raw(struct iio_dev *idev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct bu27034_data *data = iio_priv(idev); + int ret; + + ret = iio_device_claim_direct_mode(idev); + if (ret) + return ret; + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + ret = bu27034_set_scale(data, chan->channel, val, val2); + break; + case IIO_CHAN_INFO_INT_TIME: + ret = bu27034_try_set_int_time(data, val); + break; + default: + ret = -EINVAL; + break; + } + + iio_device_release_direct_mode(idev); + + return ret; +} + +static int bu27034_read_avail(struct iio_dev *idev, + struct iio_chan_spec const *chan, const int **vals, + int *type, int *length, long mask) +{ + struct bu27034_data *data = iio_priv(idev); + + switch (mask) { + case IIO_CHAN_INFO_INT_TIME: + return iio_gts_avail_times(&data->gts, vals, type, length); + case IIO_CHAN_INFO_SCALE: + return iio_gts_all_avail_scales(&data->gts, vals, type, length); + default: + return -EINVAL; + } +} + +static const struct iio_info bu27034_info = { + .read_raw = &bu27034_read_raw, + .write_raw = &bu27034_write_raw, + .read_avail = &bu27034_read_avail, +}; + +static int bu27034_chip_init(struct bu27034_data *data) +{ + int ret, sel; + + /* Reset */ + ret = regmap_update_bits(data->regmap, BU27034_REG_SYSTEM_CONTROL, + BU27034_MASK_SW_RESET, BU27034_MASK_SW_RESET); + if (ret) + return dev_err_probe(data->dev, ret, "Sensor reset failed\n"); + + msleep(1); + /* + * Read integration time here to ensure it is in regmap cache. We do + * this to speed-up the int-time acquisition in the start of the buffer + * handling thread where longer delays could make it more likely we end + * up skipping a sample, and where the longer delays make timestamps + * less accurate. + */ + ret = regmap_read(data->regmap, BU27034_REG_MODE_CONTROL1, &sel); + if (ret) + dev_err(data->dev, "reading integration time failed\n"); + + return 0; +} + +static int bu27034_wait_for_data(struct bu27034_data *data) +{ + int ret, val; + + ret = regmap_read_poll_timeout(data->regmap, BU27034_REG_MODE_CONTROL4, + val, val & BU27034_MASK_VALID, + BU27034_DATA_WAIT_TIME_US, + BU27034_TOTAL_DATA_WAIT_TIME_US); + if (ret) { + dev_err(data->dev, "data polling %s\n", + !(val & BU27034_MASK_VALID) ? "timeout" : "fail"); + + return ret; + } + + ret = regmap_bulk_read(data->regmap, BU27034_REG_DATA0_LO, + &data->scan.channels[0], + sizeof(data->scan.channels)); + if (ret) + return ret; + + bu27034_invalidate_read_data(data); + + return 0; +} + +static int bu27034_buffer_thread(void *arg) +{ + struct iio_dev *idev = arg; + struct bu27034_data *data; + int wait_ms; + + data = iio_priv(idev); + + wait_ms = bu27034_get_int_time(data); + wait_ms /= 1000; + + wait_ms -= BU27034_MEAS_WAIT_PREMATURE_MS; + + while (!kthread_should_stop()) { + int ret; + int64_t tstamp; + + msleep(wait_ms); + ret = bu27034_wait_for_data(data); + if (ret) + continue; + + tstamp = iio_get_time_ns(idev); + + if (test_bit(BU27034_CHAN_ALS, idev->active_scan_mask)) { + int mlux; + + ret = bu27034_calc_mlux(data, &data->scan.channels[0], + &mlux); + if (ret) + dev_err(data->dev, "failed to calculate lux\n"); + + /* + * The maximum Milli lux value we get with gain 1x time + * 55mS data ch0 = 0xffff ch1 = 0xffff fits in 26 bits + * so there should be no problem returning int from + * computations and casting it to u32 + */ + data->scan.mlux = (u32)mlux; + } + iio_push_to_buffers_with_timestamp(idev, &data->scan, tstamp); + } + + return 0; +} + +static int bu27034_buffer_enable(struct iio_dev *idev) +{ + struct bu27034_data *data = iio_priv(idev); + struct task_struct *task; + int ret; + + mutex_lock(&data->mutex); + ret = bu27034_meas_set(data, true); + if (ret) + goto unlock_out; + + task = kthread_run(bu27034_buffer_thread, idev, + "bu27034-buffering-%u", + iio_device_id(idev)); + if (IS_ERR(task)) { + ret = PTR_ERR(task); + goto unlock_out; + } + + data->task = task; + +unlock_out: + mutex_unlock(&data->mutex); + + return ret; +} + +static int bu27034_buffer_disable(struct iio_dev *idev) +{ + struct bu27034_data *data = iio_priv(idev); + int ret; + + mutex_lock(&data->mutex); + if (data->task) { + kthread_stop(data->task); + data->task = NULL; + } + + ret = bu27034_meas_set(data, false); + mutex_unlock(&data->mutex); + + return ret; +} + +static const struct iio_buffer_setup_ops bu27034_buffer_ops = { + .postenable = &bu27034_buffer_enable, + .predisable = &bu27034_buffer_disable, +}; + +static int bu27034_probe(struct i2c_client *i2c) +{ + struct device *dev = &i2c->dev; + struct bu27034_data *data; + struct regmap *regmap; + struct iio_dev *idev; + unsigned int part_id, reg; + int ret; + + regmap = devm_regmap_init_i2c(i2c, &bu27034_regmap); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), + "Failed to initialize Regmap\n"); + + idev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!idev) + return -ENOMEM; + + ret = devm_regulator_get_enable(dev, "vdd"); + if (ret) + return dev_err_probe(dev, ret, "Failed to get regulator\n"); + + data = iio_priv(idev); + + ret = regmap_read(regmap, BU27034_REG_SYSTEM_CONTROL, ®); + if (ret) + return dev_err_probe(dev, ret, "Failed to access sensor\n"); + + part_id = FIELD_GET(BU27034_MASK_PART_ID, reg); + + if (part_id != BU27034_ID) + dev_warn(dev, "unknown device 0x%x\n", part_id); + + ret = devm_iio_init_iio_gts(dev, BU27034_SCALE_1X, 0, bu27034_gains, + ARRAY_SIZE(bu27034_gains), bu27034_itimes, + ARRAY_SIZE(bu27034_itimes), &data->gts); + if (ret) + return ret; + + mutex_init(&data->mutex); + data->regmap = regmap; + data->dev = dev; + + idev->channels = bu27034_channels; + idev->num_channels = ARRAY_SIZE(bu27034_channels); + idev->name = "bu27034"; + idev->info = &bu27034_info; + + idev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; + idev->available_scan_masks = bu27034_scan_masks; + + ret = bu27034_chip_init(data); + if (ret) + return ret; + + ret = devm_iio_kfifo_buffer_setup(dev, idev, &bu27034_buffer_ops); + if (ret) + return dev_err_probe(dev, ret, "buffer setup failed\n"); + + ret = devm_iio_device_register(dev, idev); + if (ret < 0) + return dev_err_probe(dev, ret, + "Unable to register iio device\n"); + + return ret; +} + +static const struct of_device_id bu27034_of_match[] = { + { .compatible = "rohm,bu27034" }, + { } +}; +MODULE_DEVICE_TABLE(of, bu27034_of_match); + +static struct i2c_driver bu27034_i2c_driver = { + .driver = { + .name = "bu27034-als", + .of_match_table = bu27034_of_match, + }, + .probe_new = bu27034_probe, +}; +module_i2c_driver(bu27034_i2c_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); +MODULE_DESCRIPTION("ROHM BU27034 ambient light sensor driver"); +MODULE_IMPORT_NS(IIO_GTS_HELPER); diff --git a/drivers/iio/light/rpr0521.c b/drivers/iio/light/rpr0521.c index 668e444f6049..9d0218b7426e 100644 --- a/drivers/iio/light/rpr0521.c +++ b/drivers/iio/light/rpr0521.c @@ -431,7 +431,7 @@ static irqreturn_t rpr0521_drdy_irq_thread(int irq, void *private) struct rpr0521_data *data = iio_priv(indio_dev); if (rpr0521_is_triggered(data)) { - iio_trigger_poll_chained(data->drdy_trigger0); + iio_trigger_poll_nested(data->drdy_trigger0); return IRQ_HANDLED; } diff --git a/drivers/iio/light/st_uvis25_core.c b/drivers/iio/light/st_uvis25_core.c index c737d3e193ae..50f95c5d2060 100644 --- a/drivers/iio/light/st_uvis25_core.c +++ b/drivers/iio/light/st_uvis25_core.c @@ -161,7 +161,7 @@ static irqreturn_t st_uvis25_trigger_handler_thread(int irq, void *private) if (!(status & ST_UVIS25_REG_UV_DA_MASK)) return IRQ_NONE; - iio_trigger_poll_chained(hw->trig); + iio_trigger_poll_nested(hw->trig); return IRQ_HANDLED; } diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c index 5c44a36ab5b3..56d3963d3d66 100644 --- a/drivers/iio/light/vcnl4000.c +++ b/drivers/iio/light/vcnl4000.c @@ -1077,7 +1077,7 @@ static irqreturn_t vcnl4010_irq_thread(int irq, void *p) } if (isr & VCNL4010_INT_DRDY && iio_buffer_enabled(indio_dev)) - iio_trigger_poll_chained(indio_dev->trig); + iio_trigger_poll_nested(indio_dev->trig); end: return IRQ_HANDLED; diff --git a/drivers/iio/light/vcnl4035.c b/drivers/iio/light/vcnl4035.c index 84148b944000..14e29330e972 100644 --- a/drivers/iio/light/vcnl4035.c +++ b/drivers/iio/light/vcnl4035.c @@ -89,7 +89,7 @@ static irqreturn_t vcnl4035_drdy_irq_thread(int irq, void *private) IIO_EV_TYPE_THRESH, IIO_EV_DIR_EITHER), iio_get_time_ns(indio_dev)); - iio_trigger_poll_chained(data->drdy_trigger0); + iio_trigger_poll_nested(data->drdy_trigger0); return IRQ_HANDLED; } diff --git a/drivers/iio/potentiostat/lmp91000.c b/drivers/iio/potentiostat/lmp91000.c index b82f093f1e6a..0083e858c21e 100644 --- a/drivers/iio/potentiostat/lmp91000.c +++ b/drivers/iio/potentiostat/lmp91000.c @@ -118,7 +118,7 @@ static int lmp91000_read(struct lmp91000_data *data, int channel, int *val) data->chan_select = channel != LMP91000_REG_MODECN_3LEAD; - iio_trigger_poll_chained(data->trig); + iio_trigger_poll_nested(data->trig); ret = wait_for_completion_timeout(&data->completion, HZ); reinit_completion(&data->completion); diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index c9453389e4f7..02b97e89de50 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -17,14 +17,14 @@ config ABP060MG will be called abp060mg. config BMP280 - tristate "Bosch Sensortec BMP180/BMP280/BMP380 pressure sensor I2C driver" + tristate "Bosch Sensortec BMP180/BMP280/BMP380/BMP580 pressure sensor driver" depends on (I2C || SPI_MASTER) select REGMAP select BMP280_I2C if (I2C) select BMP280_SPI if (SPI_MASTER) help - Say yes here to build support for Bosch Sensortec BMP180, BMP280 and - BMP380 pressure and temperature sensors. Also supports the BME280 with + Say yes here to build support for Bosch Sensortec BMP180, BMP280, BMP380 + and BMP580 pressure and temperature sensors. Also supports the BME280 with an additional humidity sensor channel. To compile this driver as a module, choose M here: the core module diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index c0aff78489b4..6089f3f9d8f4 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -13,6 +13,7 @@ * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme280-ds002.pdf * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp388-ds001.pdf + * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp581-ds004.pdf * * Notice: * The link to the bmp180 datasheet points to an outdated version missing these changes: @@ -27,6 +28,7 @@ #include <linux/bitfield.h> #include <linux/device.h> #include <linux/module.h> +#include <linux/nvmem-provider.h> #include <linux/regmap.h> #include <linux/delay.h> #include <linux/iio/iio.h> @@ -49,65 +51,6 @@ */ enum { AC1, AC2, AC3, AC4, AC5, AC6, B1, B2, MB, MC, MD }; -struct bmp180_calib { - s16 AC1; - s16 AC2; - s16 AC3; - u16 AC4; - u16 AC5; - u16 AC6; - s16 B1; - s16 B2; - s16 MB; - s16 MC; - s16 MD; -}; - -/* See datasheet Section 4.2.2. */ -struct bmp280_calib { - u16 T1; - s16 T2; - s16 T3; - u16 P1; - s16 P2; - s16 P3; - s16 P4; - s16 P5; - s16 P6; - s16 P7; - s16 P8; - s16 P9; - u8 H1; - s16 H2; - u8 H3; - s16 H4; - s16 H5; - s8 H6; -}; - -/* See datasheet Section 3.11.1. */ -struct bmp380_calib { - u16 T1; - u16 T2; - s8 T3; - s16 P1; - s16 P2; - s8 P3; - s8 P4; - u16 P5; - u16 P6; - s8 P7; - s8 P8; - s16 P9; - s8 P10; - s8 P11; -}; - -static const char *const bmp280_supply_names[] = { - "vddd", "vdda" -}; - -#define BMP280_NUM_SUPPLIES ARRAY_SIZE(bmp280_supply_names) enum bmp380_odr { BMP380_ODR_200HZ, @@ -130,92 +73,39 @@ enum bmp380_odr { BMP380_ODR_0_0015HZ, }; -struct bmp280_data { - struct device *dev; - struct mutex lock; - struct regmap *regmap; - struct completion done; - bool use_eoc; - const struct bmp280_chip_info *chip_info; - union { - struct bmp180_calib bmp180; - struct bmp280_calib bmp280; - struct bmp380_calib bmp380; - } calib; - struct regulator_bulk_data supplies[BMP280_NUM_SUPPLIES]; - unsigned int start_up_time; /* in microseconds */ - - /* log of base 2 of oversampling rate */ - u8 oversampling_press; - u8 oversampling_temp; - u8 oversampling_humid; - u8 iir_filter_coeff; - - /* - * BMP380 devices introduce sampling frequency configuration. See - * datasheet sections 3.3.3. and 4.3.19 for more details. - * - * BMx280 devices allowed indirect configuration of sampling frequency - * changing the t_standby duration between measurements, as detailed on - * section 3.6.3 of the datasheet. - */ - int sampling_freq; - - /* - * Carryover value from temperature conversion, used in pressure - * calculation. - */ - s32 t_fine; - - /* - * DMA (thus cache coherency maintenance) may require the - * transfer buffers to live in their own cache lines. - */ - union { - /* Sensor data buffer */ - u8 buf[3]; - /* Calibration data buffers */ - __le16 bmp280_cal_buf[BMP280_CONTIGUOUS_CALIB_REGS / 2]; - __be16 bmp180_cal_buf[BMP180_REG_CALIB_COUNT / 2]; - u8 bmp380_cal_buf[BMP380_CALIB_REG_COUNT]; - /* Miscellaneous, endianess-aware data buffers */ - __le16 le16; - __be16 be16; - } __aligned(IIO_DMA_MINALIGN); -}; - -struct bmp280_chip_info { - unsigned int id_reg; - - const struct iio_chan_spec *channels; - int num_channels; - unsigned int start_up_time; - - const int *oversampling_temp_avail; - int num_oversampling_temp_avail; - int oversampling_temp_default; - - const int *oversampling_press_avail; - int num_oversampling_press_avail; - int oversampling_press_default; - - const int *oversampling_humid_avail; - int num_oversampling_humid_avail; - int oversampling_humid_default; - - const int *iir_filter_coeffs_avail; - int num_iir_filter_coeffs_avail; - int iir_filter_coeff_default; - - const int (*sampling_freq_avail)[2]; - int num_sampling_freq_avail; - int sampling_freq_default; - - int (*chip_config)(struct bmp280_data *); - int (*read_temp)(struct bmp280_data *, int *); - int (*read_press)(struct bmp280_data *, int *, int *); - int (*read_humid)(struct bmp280_data *, int *, int *); - int (*read_calib)(struct bmp280_data *); +enum bmp580_odr { + BMP580_ODR_240HZ, + BMP580_ODR_218HZ, + BMP580_ODR_199HZ, + BMP580_ODR_179HZ, + BMP580_ODR_160HZ, + BMP580_ODR_149HZ, + BMP580_ODR_140HZ, + BMP580_ODR_129HZ, + BMP580_ODR_120HZ, + BMP580_ODR_110HZ, + BMP580_ODR_100HZ, + BMP580_ODR_89HZ, + BMP580_ODR_80HZ, + BMP580_ODR_70HZ, + BMP580_ODR_60HZ, + BMP580_ODR_50HZ, + BMP580_ODR_45HZ, + BMP580_ODR_40HZ, + BMP580_ODR_35HZ, + BMP580_ODR_30HZ, + BMP580_ODR_25HZ, + BMP580_ODR_20HZ, + BMP580_ODR_15HZ, + BMP580_ODR_10HZ, + BMP580_ODR_5HZ, + BMP580_ODR_4HZ, + BMP580_ODR_3HZ, + BMP580_ODR_2HZ, + BMP580_ODR_1HZ, + BMP580_ODR_0_5HZ, + BMP580_ODR_0_25HZ, + BMP580_ODR_0_125HZ, }; /* @@ -473,7 +363,7 @@ static u32 bmp280_compensate_press(struct bmp280_data *data, } static int bmp280_read_temp(struct bmp280_data *data, - int *val) + int *val, int *val2) { s32 adc_temp, comp_temp; int ret; @@ -513,7 +403,7 @@ static int bmp280_read_press(struct bmp280_data *data, int ret; /* Read and compensate temperature so we get a reading of t_fine. */ - ret = bmp280_read_temp(data, NULL); + ret = bmp280_read_temp(data, NULL, NULL); if (ret < 0) return ret; @@ -545,7 +435,7 @@ static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2) int ret; /* Read and compensate temperature so we get a reading of t_fine. */ - ret = bmp280_read_temp(data, NULL); + ret = bmp280_read_temp(data, NULL, NULL); if (ret < 0) return ret; @@ -589,7 +479,7 @@ static int bmp280_read_raw(struct iio_dev *indio_dev, ret = data->chip_info->read_press(data, val, val2); break; case IIO_TEMP: - ret = data->chip_info->read_temp(data, val); + ret = data->chip_info->read_temp(data, val, val2); break; default: ret = -EINVAL; @@ -905,8 +795,10 @@ static int bmp280_chip_config(struct bmp280_data *data) static const int bmp280_oversampling_avail[] = { 1, 2, 4, 8, 16 }; -static const struct bmp280_chip_info bmp280_chip_info = { +const struct bmp280_chip_info bmp280_chip_info = { .id_reg = BMP280_REG_ID, + .chip_id = BMP280_CHIP_ID, + .regmap_config = &bmp280_regmap_config, .start_up_time = 2000, .channels = bmp280_channels, .num_channels = 2, @@ -934,6 +826,7 @@ static const struct bmp280_chip_info bmp280_chip_info = { .read_press = bmp280_read_press, .read_calib = bmp280_read_calib, }; +EXPORT_SYMBOL_NS(bmp280_chip_info, IIO_BMP280); static int bme280_chip_config(struct bmp280_data *data) { @@ -953,8 +846,10 @@ static int bme280_chip_config(struct bmp280_data *data) return bmp280_chip_config(data); } -static const struct bmp280_chip_info bme280_chip_info = { +const struct bmp280_chip_info bme280_chip_info = { .id_reg = BMP280_REG_ID, + .chip_id = BME280_CHIP_ID, + .regmap_config = &bmp280_regmap_config, .start_up_time = 2000, .channels = bmp280_channels, .num_channels = 3, @@ -977,6 +872,7 @@ static const struct bmp280_chip_info bme280_chip_info = { .read_humid = bmp280_read_humid, .read_calib = bme280_read_calib, }; +EXPORT_SYMBOL_NS(bme280_chip_info, IIO_BMP280); /* * Helper function to send a command to BMP3XX sensors. @@ -1095,7 +991,7 @@ static u32 bmp380_compensate_press(struct bmp280_data *data, u32 adc_press) return comp_press; } -static int bmp380_read_temp(struct bmp280_data *data, int *val) +static int bmp380_read_temp(struct bmp280_data *data, int *val, int *val2) { s32 comp_temp; u32 adc_temp; @@ -1135,7 +1031,7 @@ static int bmp380_read_press(struct bmp280_data *data, int *val, int *val2) int ret; /* Read and compensate for temperature so we get a reading of t_fine */ - ret = bmp380_read_temp(data, NULL); + ret = bmp380_read_temp(data, NULL, NULL); if (ret) return ret; @@ -1217,6 +1113,12 @@ static const int bmp380_odr_table[][2] = { [BMP380_ODR_0_0015HZ] = {0, 1526}, }; +static int bmp380_preinit(struct bmp280_data *data) +{ + /* BMP3xx requires soft-reset as part of initialization */ + return bmp380_cmd(data, BMP380_CMD_SOFT_RESET); +} + static int bmp380_chip_config(struct bmp280_data *data) { bool change = false, aux; @@ -1319,8 +1221,10 @@ static int bmp380_chip_config(struct bmp280_data *data) static const int bmp380_oversampling_avail[] = { 1, 2, 4, 8, 16, 32 }; static const int bmp380_iir_filter_coeffs_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128}; -static const struct bmp280_chip_info bmp380_chip_info = { +const struct bmp280_chip_info bmp380_chip_info = { .id_reg = BMP380_REG_ID, + .chip_id = BMP380_CHIP_ID, + .regmap_config = &bmp380_regmap_config, .start_up_time = 2000, .channels = bmp380_channels, .num_channels = 2, @@ -1345,7 +1249,508 @@ static const struct bmp280_chip_info bmp380_chip_info = { .read_temp = bmp380_read_temp, .read_press = bmp380_read_press, .read_calib = bmp380_read_calib, + .preinit = bmp380_preinit, +}; +EXPORT_SYMBOL_NS(bmp380_chip_info, IIO_BMP280); + +static int bmp580_soft_reset(struct bmp280_data *data) +{ + unsigned int reg; + int ret; + + ret = regmap_write(data->regmap, BMP580_REG_CMD, BMP580_CMD_SOFT_RESET); + if (ret) { + dev_err(data->dev, "failed to send reset command to device\n"); + return ret; + } + usleep_range(2000, 2500); + + /* Dummy read of chip_id */ + ret = regmap_read(data->regmap, BMP580_REG_CHIP_ID, ®); + if (ret) { + dev_err(data->dev, "failed to reestablish comms after reset\n"); + return ret; + } + + ret = regmap_read(data->regmap, BMP580_REG_INT_STATUS, ®); + if (ret) { + dev_err(data->dev, "error reading interrupt status register\n"); + return ret; + } + if (!(reg & BMP580_INT_STATUS_POR_MASK)) { + dev_err(data->dev, "error resetting sensor\n"); + return -EINVAL; + } + + return 0; +} + +/** + * bmp580_nvm_operation() - Helper function to commit NVM memory operations + * @data: sensor data struct + * @is_write: flag to signal write operation + */ +static int bmp580_nvm_operation(struct bmp280_data *data, bool is_write) +{ + unsigned long timeout, poll; + unsigned int reg; + int ret; + + /* Check NVM ready flag */ + ret = regmap_read(data->regmap, BMP580_REG_STATUS, ®); + if (ret) { + dev_err(data->dev, "failed to check nvm status\n"); + return ret; + } + if (!(reg & BMP580_STATUS_NVM_RDY_MASK)) { + dev_err(data->dev, "sensor's nvm is not ready\n"); + return -EIO; + } + + /* Start NVM operation sequence */ + ret = regmap_write(data->regmap, BMP580_REG_CMD, BMP580_CMD_NVM_OP_SEQ_0); + if (ret) { + dev_err(data->dev, "failed to send nvm operation's first sequence\n"); + return ret; + } + if (is_write) { + /* Send NVM write sequence */ + ret = regmap_write(data->regmap, BMP580_REG_CMD, + BMP580_CMD_NVM_WRITE_SEQ_1); + if (ret) { + dev_err(data->dev, "failed to send nvm write sequence\n"); + return ret; + } + /* Datasheet says on 4.8.1.2 it takes approximately 10ms */ + poll = 2000; + timeout = 12000; + } else { + /* Send NVM read sequence */ + ret = regmap_write(data->regmap, BMP580_REG_CMD, + BMP580_CMD_NVM_READ_SEQ_1); + if (ret) { + dev_err(data->dev, "failed to send nvm read sequence\n"); + return ret; + } + /* Datasheet says on 4.8.1.1 it takes approximately 200us */ + poll = 50; + timeout = 400; + } + if (ret) { + dev_err(data->dev, "failed to write command sequence\n"); + return -EIO; + } + + /* Wait until NVM is ready again */ + ret = regmap_read_poll_timeout(data->regmap, BMP580_REG_STATUS, reg, + (reg & BMP580_STATUS_NVM_RDY_MASK), + poll, timeout); + if (ret) { + dev_err(data->dev, "error checking nvm operation status\n"); + return ret; + } + + /* Check NVM error flags */ + if ((reg & BMP580_STATUS_NVM_ERR_MASK) || (reg & BMP580_STATUS_NVM_CMD_ERR_MASK)) { + dev_err(data->dev, "error processing nvm operation\n"); + return -EIO; + } + + return 0; +} + +/* + * Contrary to previous sensors families, compensation algorithm is builtin. + * We are only required to read the register raw data and adapt the ranges + * for what is expected on IIO ABI. + */ + +static int bmp580_read_temp(struct bmp280_data *data, int *val, int *val2) +{ + s32 raw_temp; + int ret; + + ret = regmap_bulk_read(data->regmap, BMP580_REG_TEMP_XLSB, data->buf, + sizeof(data->buf)); + if (ret) { + dev_err(data->dev, "failed to read temperature\n"); + return ret; + } + + raw_temp = get_unaligned_le24(data->buf); + if (raw_temp == BMP580_TEMP_SKIPPED) { + dev_err(data->dev, "reading temperature skipped\n"); + return -EIO; + } + + /* + * Temperature is returned in Celsius degrees in fractional + * form down 2^16. We reescale by x1000 to return milli Celsius + * to respect IIO ABI. + */ + *val = raw_temp * 1000; + *val2 = 16; + return IIO_VAL_FRACTIONAL_LOG2; +} + +static int bmp580_read_press(struct bmp280_data *data, int *val, int *val2) +{ + u32 raw_press; + int ret; + + ret = regmap_bulk_read(data->regmap, BMP580_REG_PRESS_XLSB, data->buf, + sizeof(data->buf)); + if (ret) { + dev_err(data->dev, "failed to read pressure\n"); + return ret; + } + + raw_press = get_unaligned_le24(data->buf); + if (raw_press == BMP580_PRESS_SKIPPED) { + dev_err(data->dev, "reading pressure skipped\n"); + return -EIO; + } + /* + * Pressure is returned in Pascals in fractional form down 2^16. + * We reescale /1000 to convert to kilopascal to respect IIO ABI. + */ + *val = raw_press; + *val2 = 64000; /* 2^6 * 1000 */ + return IIO_VAL_FRACTIONAL; +} + +static const int bmp580_odr_table[][2] = { + [BMP580_ODR_240HZ] = {240, 0}, + [BMP580_ODR_218HZ] = {218, 0}, + [BMP580_ODR_199HZ] = {199, 0}, + [BMP580_ODR_179HZ] = {179, 0}, + [BMP580_ODR_160HZ] = {160, 0}, + [BMP580_ODR_149HZ] = {149, 0}, + [BMP580_ODR_140HZ] = {140, 0}, + [BMP580_ODR_129HZ] = {129, 0}, + [BMP580_ODR_120HZ] = {120, 0}, + [BMP580_ODR_110HZ] = {110, 0}, + [BMP580_ODR_100HZ] = {100, 0}, + [BMP580_ODR_89HZ] = {89, 0}, + [BMP580_ODR_80HZ] = {80, 0}, + [BMP580_ODR_70HZ] = {70, 0}, + [BMP580_ODR_60HZ] = {60, 0}, + [BMP580_ODR_50HZ] = {50, 0}, + [BMP580_ODR_45HZ] = {45, 0}, + [BMP580_ODR_40HZ] = {40, 0}, + [BMP580_ODR_35HZ] = {35, 0}, + [BMP580_ODR_30HZ] = {30, 0}, + [BMP580_ODR_25HZ] = {25, 0}, + [BMP580_ODR_20HZ] = {20, 0}, + [BMP580_ODR_15HZ] = {15, 0}, + [BMP580_ODR_10HZ] = {10, 0}, + [BMP580_ODR_5HZ] = {5, 0}, + [BMP580_ODR_4HZ] = {4, 0}, + [BMP580_ODR_3HZ] = {3, 0}, + [BMP580_ODR_2HZ] = {2, 0}, + [BMP580_ODR_1HZ] = {1, 0}, + [BMP580_ODR_0_5HZ] = {0, 500000}, + [BMP580_ODR_0_25HZ] = {0, 250000}, + [BMP580_ODR_0_125HZ] = {0, 125000}, +}; + +static const int bmp580_nvmem_addrs[] = { 0x20, 0x21, 0x22 }; + +static int bmp580_nvmem_read(void *priv, unsigned int offset, void *val, + size_t bytes) +{ + struct bmp280_data *data = priv; + u16 *dst = val; + int ret, addr; + + pm_runtime_get_sync(data->dev); + mutex_lock(&data->lock); + + /* Set sensor in standby mode */ + ret = regmap_update_bits(data->regmap, BMP580_REG_ODR_CONFIG, + BMP580_MODE_MASK | BMP580_ODR_DEEPSLEEP_DIS, + BMP580_ODR_DEEPSLEEP_DIS | + FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_SLEEP)); + if (ret) { + dev_err(data->dev, "failed to change sensor to standby mode\n"); + goto exit; + } + /* Wait standby transition time */ + usleep_range(2500, 3000); + + while (bytes >= sizeof(*dst)) { + addr = bmp580_nvmem_addrs[offset / sizeof(*dst)]; + + ret = regmap_write(data->regmap, BMP580_REG_NVM_ADDR, + FIELD_PREP(BMP580_NVM_ROW_ADDR_MASK, addr)); + if (ret) { + dev_err(data->dev, "error writing nvm address\n"); + goto exit; + } + + ret = bmp580_nvm_operation(data, false); + if (ret) + goto exit; + + ret = regmap_bulk_read(data->regmap, BMP580_REG_NVM_DATA_LSB, &data->le16, + sizeof(data->le16)); + if (ret) { + dev_err(data->dev, "error reading nvm data regs\n"); + goto exit; + } + + *dst++ = le16_to_cpu(data->le16); + bytes -= sizeof(*dst); + offset += sizeof(*dst); + } +exit: + /* Restore chip config */ + data->chip_info->chip_config(data); + mutex_unlock(&data->lock); + pm_runtime_mark_last_busy(data->dev); + pm_runtime_put_autosuspend(data->dev); + return ret; +} + +static int bmp580_nvmem_write(void *priv, unsigned int offset, void *val, + size_t bytes) +{ + struct bmp280_data *data = priv; + u16 *buf = val; + int ret, addr; + + pm_runtime_get_sync(data->dev); + mutex_lock(&data->lock); + + /* Set sensor in standby mode */ + ret = regmap_update_bits(data->regmap, BMP580_REG_ODR_CONFIG, + BMP580_MODE_MASK | BMP580_ODR_DEEPSLEEP_DIS, + BMP580_ODR_DEEPSLEEP_DIS | + FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_SLEEP)); + if (ret) { + dev_err(data->dev, "failed to change sensor to standby mode\n"); + goto exit; + } + /* Wait standby transition time */ + usleep_range(2500, 3000); + + while (bytes >= sizeof(*buf)) { + addr = bmp580_nvmem_addrs[offset / sizeof(*buf)]; + + ret = regmap_write(data->regmap, BMP580_REG_NVM_ADDR, BMP580_NVM_PROG_EN | + FIELD_PREP(BMP580_NVM_ROW_ADDR_MASK, addr)); + if (ret) { + dev_err(data->dev, "error writing nvm address\n"); + goto exit; + } + data->le16 = cpu_to_le16(*buf++); + + ret = regmap_bulk_write(data->regmap, BMP580_REG_NVM_DATA_LSB, &data->le16, + sizeof(data->le16)); + if (ret) { + dev_err(data->dev, "error writing LSB NVM data regs\n"); + goto exit; + } + + ret = bmp580_nvm_operation(data, true); + if (ret) + goto exit; + + /* Disable programming mode bit */ + ret = regmap_update_bits(data->regmap, BMP580_REG_NVM_ADDR, + BMP580_NVM_PROG_EN, 0); + if (ret) { + dev_err(data->dev, "error resetting nvm write\n"); + goto exit; + } + + bytes -= sizeof(*buf); + offset += sizeof(*buf); + } +exit: + /* Restore chip config */ + data->chip_info->chip_config(data); + mutex_unlock(&data->lock); + pm_runtime_mark_last_busy(data->dev); + pm_runtime_put_autosuspend(data->dev); + return ret; +} + +static int bmp580_preinit(struct bmp280_data *data) +{ + struct nvmem_config config = { + .dev = data->dev, + .priv = data, + .name = "bmp580_nvmem", + .word_size = sizeof(u16), + .stride = sizeof(u16), + .size = 3 * sizeof(u16), + .reg_read = bmp580_nvmem_read, + .reg_write = bmp580_nvmem_write, + }; + unsigned int reg; + int ret; + + /* Issue soft-reset command */ + ret = bmp580_soft_reset(data); + if (ret) + return ret; + + /* Post powerup sequence */ + ret = regmap_read(data->regmap, BMP580_REG_CHIP_ID, ®); + if (ret) + return ret; + + /* Print warn message if we don't know the chip id */ + if (reg != BMP580_CHIP_ID && reg != BMP580_CHIP_ID_ALT) + dev_warn(data->dev, "preinit: unexpected chip_id\n"); + + ret = regmap_read(data->regmap, BMP580_REG_STATUS, ®); + if (ret) + return ret; + + /* Check nvm status */ + if (!(reg & BMP580_STATUS_NVM_RDY_MASK) || (reg & BMP580_STATUS_NVM_ERR_MASK)) { + dev_err(data->dev, "preinit: nvm error on powerup sequence\n"); + return -EIO; + } + + /* Register nvmem device */ + return PTR_ERR_OR_ZERO(devm_nvmem_register(config.dev, &config)); +} + +static int bmp580_chip_config(struct bmp280_data *data) +{ + bool change = false, aux; + unsigned int tmp; + u8 reg_val; + int ret; + + /* Sets sensor in standby mode */ + ret = regmap_update_bits(data->regmap, BMP580_REG_ODR_CONFIG, + BMP580_MODE_MASK | BMP580_ODR_DEEPSLEEP_DIS, + BMP580_ODR_DEEPSLEEP_DIS | + FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_SLEEP)); + if (ret) { + dev_err(data->dev, "failed to change sensor to standby mode\n"); + return ret; + } + /* From datasheet's table 4: electrical characteristics */ + usleep_range(2500, 3000); + + /* Set default DSP mode settings */ + reg_val = FIELD_PREP(BMP580_DSP_COMP_MASK, BMP580_DSP_PRESS_TEMP_COMP_EN) | + BMP580_DSP_SHDW_IIR_TEMP_EN | BMP580_DSP_SHDW_IIR_PRESS_EN; + + ret = regmap_update_bits(data->regmap, BMP580_REG_DSP_CONFIG, + BMP580_DSP_COMP_MASK | + BMP580_DSP_SHDW_IIR_TEMP_EN | + BMP580_DSP_SHDW_IIR_PRESS_EN, reg_val); + + /* Configure oversampling */ + reg_val = FIELD_PREP(BMP580_OSR_TEMP_MASK, data->oversampling_temp) | + FIELD_PREP(BMP580_OSR_PRESS_MASK, data->oversampling_press) | + BMP580_OSR_PRESS_EN; + + ret = regmap_update_bits_check(data->regmap, BMP580_REG_OSR_CONFIG, + BMP580_OSR_TEMP_MASK | BMP580_OSR_PRESS_MASK | + BMP580_OSR_PRESS_EN, + reg_val, &aux); + if (ret) { + dev_err(data->dev, "failed to write oversampling register\n"); + return ret; + } + change = change || aux; + + /* Configure output data rate */ + ret = regmap_update_bits_check(data->regmap, BMP580_REG_ODR_CONFIG, BMP580_ODR_MASK, + FIELD_PREP(BMP580_ODR_MASK, data->sampling_freq), + &aux); + if (ret) { + dev_err(data->dev, "failed to write ODR configuration register\n"); + return ret; + } + change = change || aux; + + /* Set filter data */ + reg_val = FIELD_PREP(BMP580_DSP_IIR_PRESS_MASK, data->iir_filter_coeff) | + FIELD_PREP(BMP580_DSP_IIR_TEMP_MASK, data->iir_filter_coeff); + + ret = regmap_update_bits_check(data->regmap, BMP580_REG_DSP_IIR, + BMP580_DSP_IIR_PRESS_MASK | + BMP580_DSP_IIR_TEMP_MASK, + reg_val, &aux); + if (ret) { + dev_err(data->dev, "failed to write config register\n"); + return ret; + } + change = change || aux; + + /* Restore sensor to normal operation mode */ + ret = regmap_write_bits(data->regmap, BMP580_REG_ODR_CONFIG, + BMP580_MODE_MASK, + FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_NORMAL)); + if (ret) { + dev_err(data->dev, "failed to set normal mode\n"); + return ret; + } + /* From datasheet's table 4: electrical characteristics */ + usleep_range(3000, 3500); + + if (change) { + /* + * Check if ODR and OSR settings are valid or we are + * operating in a degraded mode. + */ + ret = regmap_read(data->regmap, BMP580_REG_EFF_OSR, &tmp); + if (ret) { + dev_err(data->dev, "error reading effective OSR register\n"); + return ret; + } + if (!(tmp & BMP580_EFF_OSR_VALID_ODR)) { + dev_warn(data->dev, "OSR and ODR incompatible settings detected\n"); + /* Set current OSR settings from data on effective OSR */ + data->oversampling_temp = FIELD_GET(BMP580_EFF_OSR_TEMP_MASK, tmp); + data->oversampling_press = FIELD_GET(BMP580_EFF_OSR_PRESS_MASK, tmp); + return -EINVAL; + } + } + + return 0; +} + +static const int bmp580_oversampling_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128 }; + +const struct bmp280_chip_info bmp580_chip_info = { + .id_reg = BMP580_REG_CHIP_ID, + .chip_id = BMP580_CHIP_ID, + .regmap_config = &bmp580_regmap_config, + .start_up_time = 2000, + .channels = bmp380_channels, + .num_channels = 2, + + .oversampling_temp_avail = bmp580_oversampling_avail, + .num_oversampling_temp_avail = ARRAY_SIZE(bmp580_oversampling_avail), + .oversampling_temp_default = ilog2(1), + + .oversampling_press_avail = bmp580_oversampling_avail, + .num_oversampling_press_avail = ARRAY_SIZE(bmp580_oversampling_avail), + .oversampling_press_default = ilog2(4), + + .sampling_freq_avail = bmp580_odr_table, + .num_sampling_freq_avail = ARRAY_SIZE(bmp580_odr_table) * 2, + .sampling_freq_default = BMP580_ODR_50HZ, + + .iir_filter_coeffs_avail = bmp380_iir_filter_coeffs_avail, + .num_iir_filter_coeffs_avail = ARRAY_SIZE(bmp380_iir_filter_coeffs_avail), + .iir_filter_coeff_default = 2, + + .chip_config = bmp580_chip_config, + .read_temp = bmp580_read_temp, + .read_press = bmp580_read_press, + .preinit = bmp580_preinit, }; +EXPORT_SYMBOL_NS(bmp580_chip_info, IIO_BMP280); static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas) { @@ -1467,7 +1872,7 @@ static s32 bmp180_compensate_temp(struct bmp280_data *data, s32 adc_temp) return (data->t_fine + 8) >> 4; } -static int bmp180_read_temp(struct bmp280_data *data, int *val) +static int bmp180_read_temp(struct bmp280_data *data, int *val, int *val2) { s32 adc_temp, comp_temp; int ret; @@ -1555,7 +1960,7 @@ static int bmp180_read_press(struct bmp280_data *data, int ret; /* Read and compensate temperature so we get a reading of t_fine. */ - ret = bmp180_read_temp(data, NULL); + ret = bmp180_read_temp(data, NULL, NULL); if (ret) return ret; @@ -1579,8 +1984,10 @@ static int bmp180_chip_config(struct bmp280_data *data) static const int bmp180_oversampling_temp_avail[] = { 1 }; static const int bmp180_oversampling_press_avail[] = { 1, 2, 4, 8 }; -static const struct bmp280_chip_info bmp180_chip_info = { +const struct bmp280_chip_info bmp180_chip_info = { .id_reg = BMP280_REG_ID, + .chip_id = BMP180_CHIP_ID, + .regmap_config = &bmp180_regmap_config, .start_up_time = 2000, .channels = bmp280_channels, .num_channels = 2, @@ -1600,6 +2007,7 @@ static const struct bmp280_chip_info bmp180_chip_info = { .read_press = bmp180_read_press, .read_calib = bmp180_read_calib, }; +EXPORT_SYMBOL_NS(bmp180_chip_info, IIO_BMP280); static irqreturn_t bmp085_eoc_irq(int irq, void *d) { @@ -1661,11 +2069,10 @@ static void bmp280_regulators_disable(void *data) int bmp280_common_probe(struct device *dev, struct regmap *regmap, - unsigned int chip, + const struct bmp280_chip_info *chip_info, const char *name, int irq) { - const struct bmp280_chip_info *chip_info; struct iio_dev *indio_dev; struct bmp280_data *data; struct gpio_desc *gpiod; @@ -1684,22 +2091,6 @@ int bmp280_common_probe(struct device *dev, indio_dev->info = &bmp280_info; indio_dev->modes = INDIO_DIRECT_MODE; - switch (chip) { - case BMP180_CHIP_ID: - chip_info = &bmp180_chip_info; - break; - case BMP280_CHIP_ID: - chip_info = &bmp280_chip_info; - break; - case BME280_CHIP_ID: - chip_info = &bme280_chip_info; - break; - case BMP380_CHIP_ID: - chip_info = &bmp380_chip_info; - break; - default: - return -EINVAL; - } data->chip_info = chip_info; /* Apply initial values from chip info structure */ @@ -1751,17 +2142,17 @@ int bmp280_common_probe(struct device *dev, ret = regmap_read(regmap, data->chip_info->id_reg, &chip_id); if (ret < 0) return ret; - if (chip_id != chip) { + if (chip_id != data->chip_info->chip_id) { dev_err(dev, "bad chip id: expected %x got %x\n", - chip, chip_id); + data->chip_info->chip_id, chip_id); return -EINVAL; } - /* BMP3xx requires soft-reset as part of initialization */ - if (chip_id == BMP380_CHIP_ID) { - ret = bmp380_cmd(data, BMP380_CMD_SOFT_RESET); - if (ret < 0) - return ret; + if (data->chip_info->preinit) { + ret = data->chip_info->preinit(data); + if (ret) + return dev_err_probe(data->dev, ret, + "error running preinit tasks\n"); } ret = data->chip_info->chip_config(data); @@ -1776,10 +2167,12 @@ int bmp280_common_probe(struct device *dev, * time once. They will not change. */ - ret = data->chip_info->read_calib(data); - if (ret < 0) - return dev_err_probe(data->dev, ret, - "failed to read calibration coefficients\n"); + if (data->chip_info->read_calib) { + ret = data->chip_info->read_calib(data); + if (ret < 0) + return dev_err_probe(data->dev, ret, + "failed to read calibration coefficients\n"); + } /* * Attempt to grab an optional EOC IRQ - only the BMP085 has this diff --git a/drivers/iio/pressure/bmp280-i2c.c b/drivers/iio/pressure/bmp280-i2c.c index 14eab086d24a..567b945e6427 100644 --- a/drivers/iio/pressure/bmp280-i2c.c +++ b/drivers/iio/pressure/bmp280-i2c.c @@ -8,25 +8,14 @@ static int bmp280_i2c_probe(struct i2c_client *client) { struct regmap *regmap; - const struct regmap_config *regmap_config; + const struct bmp280_chip_info *chip_info; const struct i2c_device_id *id = i2c_client_get_device_id(client); - switch (id->driver_data) { - case BMP180_CHIP_ID: - regmap_config = &bmp180_regmap_config; - break; - case BMP280_CHIP_ID: - case BME280_CHIP_ID: - regmap_config = &bmp280_regmap_config; - break; - case BMP380_CHIP_ID: - regmap_config = &bmp380_regmap_config; - break; - default: - return -EINVAL; - } + chip_info = device_get_match_data(&client->dev); + if (!chip_info) + chip_info = (const struct bmp280_chip_info *) id->driver_data; - regmap = devm_regmap_init_i2c(client, regmap_config); + regmap = devm_regmap_init_i2c(client, chip_info->regmap_config); if (IS_ERR(regmap)) { dev_err(&client->dev, "failed to allocate register map\n"); return PTR_ERR(regmap); @@ -34,27 +23,29 @@ static int bmp280_i2c_probe(struct i2c_client *client) return bmp280_common_probe(&client->dev, regmap, - id->driver_data, + chip_info, id->name, client->irq); } static const struct of_device_id bmp280_of_i2c_match[] = { - { .compatible = "bosch,bmp085", .data = (void *)BMP180_CHIP_ID }, - { .compatible = "bosch,bmp180", .data = (void *)BMP180_CHIP_ID }, - { .compatible = "bosch,bmp280", .data = (void *)BMP280_CHIP_ID }, - { .compatible = "bosch,bme280", .data = (void *)BME280_CHIP_ID }, - { .compatible = "bosch,bmp380", .data = (void *)BMP380_CHIP_ID }, + { .compatible = "bosch,bmp085", .data = &bmp180_chip_info }, + { .compatible = "bosch,bmp180", .data = &bmp180_chip_info }, + { .compatible = "bosch,bmp280", .data = &bmp280_chip_info }, + { .compatible = "bosch,bme280", .data = &bme280_chip_info }, + { .compatible = "bosch,bmp380", .data = &bmp380_chip_info }, + { .compatible = "bosch,bmp580", .data = &bmp580_chip_info }, { }, }; MODULE_DEVICE_TABLE(of, bmp280_of_i2c_match); static const struct i2c_device_id bmp280_i2c_id[] = { - {"bmp085", BMP180_CHIP_ID }, - {"bmp180", BMP180_CHIP_ID }, - {"bmp280", BMP280_CHIP_ID }, - {"bme280", BME280_CHIP_ID }, - {"bmp380", BMP380_CHIP_ID }, + {"bmp085", (kernel_ulong_t)&bmp180_chip_info }, + {"bmp180", (kernel_ulong_t)&bmp180_chip_info }, + {"bmp280", (kernel_ulong_t)&bmp280_chip_info }, + {"bme280", (kernel_ulong_t)&bme280_chip_info }, + {"bmp380", (kernel_ulong_t)&bmp380_chip_info }, + {"bmp580", (kernel_ulong_t)&bmp580_chip_info }, { }, }; MODULE_DEVICE_TABLE(i2c, bmp280_i2c_id); diff --git a/drivers/iio/pressure/bmp280-regmap.c b/drivers/iio/pressure/bmp280-regmap.c index c98c67970265..3ee56720428c 100644 --- a/drivers/iio/pressure/bmp280-regmap.c +++ b/drivers/iio/pressure/bmp280-regmap.c @@ -115,6 +115,54 @@ static bool bmp380_is_volatile_reg(struct device *dev, unsigned int reg) } } +static bool bmp580_is_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case BMP580_REG_NVM_DATA_MSB: + case BMP580_REG_NVM_DATA_LSB: + case BMP580_REG_NVM_ADDR: + case BMP580_REG_ODR_CONFIG: + case BMP580_REG_OSR_CONFIG: + case BMP580_REG_INT_SOURCE: + case BMP580_REG_INT_CONFIG: + case BMP580_REG_OOR_THR_MSB: + case BMP580_REG_OOR_THR_LSB: + case BMP580_REG_OOR_CONFIG: + case BMP580_REG_OOR_RANGE: + case BMP580_REG_IF_CONFIG: + case BMP580_REG_FIFO_CONFIG: + case BMP580_REG_FIFO_SEL: + case BMP580_REG_DSP_CONFIG: + case BMP580_REG_DSP_IIR: + case BMP580_REG_CMD: + return true; + default: + return false; + } +} + +static bool bmp580_is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case BMP580_REG_NVM_DATA_MSB: + case BMP580_REG_NVM_DATA_LSB: + case BMP580_REG_FIFO_COUNT: + case BMP580_REG_INT_STATUS: + case BMP580_REG_PRESS_XLSB: + case BMP580_REG_PRESS_LSB: + case BMP580_REG_PRESS_MSB: + case BMP580_REG_FIFO_DATA: + case BMP580_REG_TEMP_XLSB: + case BMP580_REG_TEMP_LSB: + case BMP580_REG_TEMP_MSB: + case BMP580_REG_EFF_OSR: + case BMP580_REG_STATUS: + return true; + default: + return false; + } +} + const struct regmap_config bmp280_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -138,3 +186,15 @@ const struct regmap_config bmp380_regmap_config = { .volatile_reg = bmp380_is_volatile_reg, }; EXPORT_SYMBOL_NS(bmp380_regmap_config, IIO_BMP280); + +const struct regmap_config bmp580_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = BMP580_REG_CMD, + .cache_type = REGCACHE_RBTREE, + + .writeable_reg = bmp580_is_writeable_reg, + .volatile_reg = bmp580_is_volatile_reg, +}; +EXPORT_SYMBOL_NS(bmp580_regmap_config, IIO_BMP280); diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c index 011c68e07ebf..1dff9bb7c4e9 100644 --- a/drivers/iio/pressure/bmp280-spi.c +++ b/drivers/iio/pressure/bmp280-spi.c @@ -47,8 +47,8 @@ static struct regmap_bus bmp280_regmap_bus = { static int bmp280_spi_probe(struct spi_device *spi) { const struct spi_device_id *id = spi_get_device_id(spi); + const struct bmp280_chip_info *chip_info; struct regmap *regmap; - const struct regmap_config *regmap_config; int ret; spi->bits_per_word = 8; @@ -58,25 +58,14 @@ static int bmp280_spi_probe(struct spi_device *spi) return ret; } - switch (id->driver_data) { - case BMP180_CHIP_ID: - regmap_config = &bmp180_regmap_config; - break; - case BMP280_CHIP_ID: - case BME280_CHIP_ID: - regmap_config = &bmp280_regmap_config; - break; - case BMP380_CHIP_ID: - regmap_config = &bmp380_regmap_config; - break; - default: - return -EINVAL; - } + chip_info = device_get_match_data(&spi->dev); + if (!chip_info) + chip_info = (const struct bmp280_chip_info *) id->driver_data; regmap = devm_regmap_init(&spi->dev, &bmp280_regmap_bus, &spi->dev, - regmap_config); + chip_info->regmap_config); if (IS_ERR(regmap)) { dev_err(&spi->dev, "failed to allocate register map\n"); return PTR_ERR(regmap); @@ -84,28 +73,30 @@ static int bmp280_spi_probe(struct spi_device *spi) return bmp280_common_probe(&spi->dev, regmap, - id->driver_data, + chip_info, id->name, spi->irq); } static const struct of_device_id bmp280_of_spi_match[] = { - { .compatible = "bosch,bmp085", }, - { .compatible = "bosch,bmp180", }, - { .compatible = "bosch,bmp181", }, - { .compatible = "bosch,bmp280", }, - { .compatible = "bosch,bme280", }, - { .compatible = "bosch,bmp380", }, + { .compatible = "bosch,bmp085", .data = &bmp180_chip_info }, + { .compatible = "bosch,bmp180", .data = &bmp180_chip_info }, + { .compatible = "bosch,bmp181", .data = &bmp180_chip_info }, + { .compatible = "bosch,bmp280", .data = &bmp280_chip_info }, + { .compatible = "bosch,bme280", .data = &bmp280_chip_info }, + { .compatible = "bosch,bmp380", .data = &bmp380_chip_info }, + { .compatible = "bosch,bmp580", .data = &bmp580_chip_info }, { }, }; MODULE_DEVICE_TABLE(of, bmp280_of_spi_match); static const struct spi_device_id bmp280_spi_id[] = { - { "bmp180", BMP180_CHIP_ID }, - { "bmp181", BMP180_CHIP_ID }, - { "bmp280", BMP280_CHIP_ID }, - { "bme280", BME280_CHIP_ID }, - { "bmp380", BMP380_CHIP_ID }, + { "bmp180", (kernel_ulong_t)&bmp180_chip_info }, + { "bmp181", (kernel_ulong_t)&bmp180_chip_info }, + { "bmp280", (kernel_ulong_t)&bmp280_chip_info }, + { "bme280", (kernel_ulong_t)&bmp280_chip_info }, + { "bmp380", (kernel_ulong_t)&bmp380_chip_info }, + { "bmp580", (kernel_ulong_t)&bmp580_chip_info }, { } }; MODULE_DEVICE_TABLE(spi, bmp280_spi_id); diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h index c791325c7416..5c0563ce7572 100644 --- a/drivers/iio/pressure/bmp280.h +++ b/drivers/iio/pressure/bmp280.h @@ -1,7 +1,114 @@ /* SPDX-License-Identifier: GPL-2.0 */ #include <linux/bitops.h> #include <linux/device.h> +#include <linux/iio/iio.h> #include <linux/regmap.h> +#include <linux/regulator/consumer.h> + + +/* BMP580 specific registers */ +#define BMP580_REG_CMD 0x7E +#define BMP580_REG_EFF_OSR 0x38 +#define BMP580_REG_ODR_CONFIG 0x37 +#define BMP580_REG_OSR_CONFIG 0x36 +#define BMP580_REG_IF_CONFIG 0x13 +#define BMP580_REG_REV_ID 0x02 +#define BMP580_REG_CHIP_ID 0x01 +/* OOR allows to configure a pressure alarm */ +#define BMP580_REG_OOR_CONFIG 0x35 +#define BMP580_REG_OOR_RANGE 0x34 +#define BMP580_REG_OOR_THR_MSB 0x33 +#define BMP580_REG_OOR_THR_LSB 0x32 +/* DSP registers (IIR filters) */ +#define BMP580_REG_DSP_IIR 0x31 +#define BMP580_REG_DSP_CONFIG 0x30 +/* NVM access registers */ +#define BMP580_REG_NVM_DATA_MSB 0x2D +#define BMP580_REG_NVM_DATA_LSB 0x2C +#define BMP580_REG_NVM_ADDR 0x2B +/* Status registers */ +#define BMP580_REG_STATUS 0x28 +#define BMP580_REG_INT_STATUS 0x27 +#define BMP580_REG_CHIP_STATUS 0x11 +/* Data registers */ +#define BMP580_REG_FIFO_DATA 0x29 +#define BMP580_REG_PRESS_MSB 0x22 +#define BMP580_REG_PRESS_LSB 0x21 +#define BMP580_REG_PRESS_XLSB 0x20 +#define BMP580_REG_TEMP_MSB 0x1F +#define BMP580_REG_TEMP_LSB 0x1E +#define BMP580_REG_TEMP_XLSB 0x1D +/* FIFO config registers */ +#define BMP580_REG_FIFO_SEL 0x18 +#define BMP580_REG_FIFO_COUNT 0x17 +#define BMP580_REG_FIFO_CONFIG 0x16 +/* Interruptions config registers */ +#define BMP580_REG_INT_SOURCE 0x15 +#define BMP580_REG_INT_CONFIG 0x14 + +#define BMP580_CMD_NOOP 0x00 +#define BMP580_CMD_EXTMODE_SEQ_0 0x73 +#define BMP580_CMD_EXTMODE_SEQ_1 0xB4 +#define BMP580_CMD_EXTMODE_SEQ_2 0x69 +#define BMP580_CMD_NVM_OP_SEQ_0 0x5D +#define BMP580_CMD_NVM_READ_SEQ_1 0xA5 +#define BMP580_CMD_NVM_WRITE_SEQ_1 0xA0 +#define BMP580_CMD_SOFT_RESET 0xB6 + +#define BMP580_INT_STATUS_POR_MASK BIT(4) + +#define BMP580_STATUS_CORE_RDY_MASK BIT(0) +#define BMP580_STATUS_NVM_RDY_MASK BIT(1) +#define BMP580_STATUS_NVM_ERR_MASK BIT(2) +#define BMP580_STATUS_NVM_CMD_ERR_MASK BIT(3) + +#define BMP580_OSR_PRESS_MASK GENMASK(5, 3) +#define BMP580_OSR_TEMP_MASK GENMASK(2, 0) +#define BMP580_OSR_PRESS_EN BIT(6) +#define BMP580_EFF_OSR_PRESS_MASK GENMASK(5, 3) +#define BMP580_EFF_OSR_TEMP_MASK GENMASK(2, 0) +#define BMP580_EFF_OSR_VALID_ODR BIT(7) + +#define BMP580_ODR_MASK GENMASK(6, 2) +#define BMP580_MODE_MASK GENMASK(1, 0) +#define BMP580_MODE_SLEEP 0 +#define BMP580_MODE_NORMAL 1 +#define BMP580_MODE_FORCED 2 +#define BMP580_MODE_CONTINOUS 3 +#define BMP580_ODR_DEEPSLEEP_DIS BIT(7) + +#define BMP580_DSP_COMP_MASK GENMASK(1, 0) +#define BMP580_DSP_COMP_DIS 0 +#define BMP580_DSP_TEMP_COMP_EN 1 +/* + * In section 7.27 of datasheet, modes 2 and 3 are technically the same. + * Pressure compensation means also enabling temperature compensation + */ +#define BMP580_DSP_PRESS_COMP_EN 2 +#define BMP580_DSP_PRESS_TEMP_COMP_EN 3 +#define BMP580_DSP_IIR_FORCED_FLUSH BIT(2) +#define BMP580_DSP_SHDW_IIR_TEMP_EN BIT(3) +#define BMP580_DSP_FIFO_IIR_TEMP_EN BIT(4) +#define BMP580_DSP_SHDW_IIR_PRESS_EN BIT(5) +#define BMP580_DSP_FIFO_IIR_PRESS_EN BIT(6) +#define BMP580_DSP_OOR_IIR_PRESS_EN BIT(7) + +#define BMP580_DSP_IIR_PRESS_MASK GENMASK(5, 3) +#define BMP580_DSP_IIR_TEMP_MASK GENMASK(2, 0) +#define BMP580_FILTER_OFF 0 +#define BMP580_FILTER_1X 1 +#define BMP580_FILTER_3X 2 +#define BMP580_FILTER_7X 3 +#define BMP580_FILTER_15X 4 +#define BMP580_FILTER_31X 5 +#define BMP580_FILTER_63X 6 +#define BMP580_FILTER_127X 7 + +#define BMP580_NVM_ROW_ADDR_MASK GENMASK(5, 0) +#define BMP580_NVM_PROG_EN BIT(6) + +#define BMP580_TEMP_SKIPPED 0x7f7f7f +#define BMP580_PRESS_SKIPPED 0x7f7f7f /* BMP380 specific registers */ #define BMP380_REG_CMD 0x7E @@ -181,6 +288,8 @@ #define BMP280_REG_ID 0xD0 #define BMP380_CHIP_ID 0x50 +#define BMP580_CHIP_ID 0x50 +#define BMP580_CHIP_ID_ALT 0x51 #define BMP180_CHIP_ID 0x55 #define BMP280_CHIP_ID 0x58 #define BME280_CHIP_ID 0x60 @@ -191,15 +300,177 @@ #define BMP280_PRESS_SKIPPED 0x80000 #define BMP280_HUMIDITY_SKIPPED 0x8000 +/* Core exported structs */ + +static const char *const bmp280_supply_names[] = { + "vddd", "vdda" +}; + +#define BMP280_NUM_SUPPLIES ARRAY_SIZE(bmp280_supply_names) + +struct bmp180_calib { + s16 AC1; + s16 AC2; + s16 AC3; + u16 AC4; + u16 AC5; + u16 AC6; + s16 B1; + s16 B2; + s16 MB; + s16 MC; + s16 MD; +}; + +/* See datasheet Section 4.2.2. */ +struct bmp280_calib { + u16 T1; + s16 T2; + s16 T3; + u16 P1; + s16 P2; + s16 P3; + s16 P4; + s16 P5; + s16 P6; + s16 P7; + s16 P8; + s16 P9; + u8 H1; + s16 H2; + u8 H3; + s16 H4; + s16 H5; + s8 H6; +}; + +/* See datasheet Section 3.11.1. */ +struct bmp380_calib { + u16 T1; + u16 T2; + s8 T3; + s16 P1; + s16 P2; + s8 P3; + s8 P4; + u16 P5; + u16 P6; + s8 P7; + s8 P8; + s16 P9; + s8 P10; + s8 P11; +}; + +struct bmp280_data { + struct device *dev; + struct mutex lock; + struct regmap *regmap; + struct completion done; + bool use_eoc; + const struct bmp280_chip_info *chip_info; + union { + struct bmp180_calib bmp180; + struct bmp280_calib bmp280; + struct bmp380_calib bmp380; + } calib; + struct regulator_bulk_data supplies[BMP280_NUM_SUPPLIES]; + unsigned int start_up_time; /* in microseconds */ + + /* log of base 2 of oversampling rate */ + u8 oversampling_press; + u8 oversampling_temp; + u8 oversampling_humid; + u8 iir_filter_coeff; + + /* + * BMP380 devices introduce sampling frequency configuration. See + * datasheet sections 3.3.3. and 4.3.19 for more details. + * + * BMx280 devices allowed indirect configuration of sampling frequency + * changing the t_standby duration between measurements, as detailed on + * section 3.6.3 of the datasheet. + */ + int sampling_freq; + + /* + * Carryover value from temperature conversion, used in pressure + * calculation. + */ + s32 t_fine; + + /* + * DMA (thus cache coherency maintenance) may require the + * transfer buffers to live in their own cache lines. + */ + union { + /* Sensor data buffer */ + u8 buf[3]; + /* Calibration data buffers */ + __le16 bmp280_cal_buf[BMP280_CONTIGUOUS_CALIB_REGS / 2]; + __be16 bmp180_cal_buf[BMP180_REG_CALIB_COUNT / 2]; + u8 bmp380_cal_buf[BMP380_CALIB_REG_COUNT]; + /* Miscellaneous, endianess-aware data buffers */ + __le16 le16; + __be16 be16; + } __aligned(IIO_DMA_MINALIGN); +}; + +struct bmp280_chip_info { + unsigned int id_reg; + const unsigned int chip_id; + + const struct regmap_config *regmap_config; + + const struct iio_chan_spec *channels; + int num_channels; + unsigned int start_up_time; + + const int *oversampling_temp_avail; + int num_oversampling_temp_avail; + int oversampling_temp_default; + + const int *oversampling_press_avail; + int num_oversampling_press_avail; + int oversampling_press_default; + + const int *oversampling_humid_avail; + int num_oversampling_humid_avail; + int oversampling_humid_default; + + const int *iir_filter_coeffs_avail; + int num_iir_filter_coeffs_avail; + int iir_filter_coeff_default; + + const int (*sampling_freq_avail)[2]; + int num_sampling_freq_avail; + int sampling_freq_default; + + int (*chip_config)(struct bmp280_data *); + int (*read_temp)(struct bmp280_data *, int *, int *); + int (*read_press)(struct bmp280_data *, int *, int *); + int (*read_humid)(struct bmp280_data *, int *, int *); + int (*read_calib)(struct bmp280_data *); + int (*preinit)(struct bmp280_data *); +}; + +/* Chip infos for each variant */ +extern const struct bmp280_chip_info bmp180_chip_info; +extern const struct bmp280_chip_info bmp280_chip_info; +extern const struct bmp280_chip_info bme280_chip_info; +extern const struct bmp280_chip_info bmp380_chip_info; +extern const struct bmp280_chip_info bmp580_chip_info; + /* Regmap configurations */ extern const struct regmap_config bmp180_regmap_config; extern const struct regmap_config bmp280_regmap_config; extern const struct regmap_config bmp380_regmap_config; +extern const struct regmap_config bmp580_regmap_config; /* Probe called from different transports */ int bmp280_common_probe(struct device *dev, struct regmap *regmap, - unsigned int chip, + const struct bmp280_chip_info *, const char *name, int irq); diff --git a/drivers/iio/pressure/zpa2326.c b/drivers/iio/pressure/zpa2326.c index 67119a9b95fc..421e059d1f19 100644 --- a/drivers/iio/pressure/zpa2326.c +++ b/drivers/iio/pressure/zpa2326.c @@ -829,7 +829,7 @@ static irqreturn_t zpa2326_handle_threaded_irq(int irq, void *data) } /* New sample available: dispatch internal trigger consumers. */ - iio_trigger_poll_chained(priv->trigger); + iio_trigger_poll_nested(priv->trigger); if (cont) /* diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c index ebc95cf8f5f4..96fa97451cbf 100644 --- a/drivers/iio/proximity/as3935.c +++ b/drivers/iio/proximity/as3935.c @@ -257,7 +257,7 @@ static void as3935_event_work(struct work_struct *work) switch (val) { case AS3935_EVENT_INT: - iio_trigger_poll_chained(st->trig); + iio_trigger_poll_nested(st->trig); break; case AS3935_DISTURB_INT: case AS3935_NOISE_INT: diff --git a/drivers/iio/proximity/sx9324.c b/drivers/iio/proximity/sx9324.c index 977cf17cec52..9a40ca32bb1c 100644 --- a/drivers/iio/proximity/sx9324.c +++ b/drivers/iio/proximity/sx9324.c @@ -783,73 +783,75 @@ static int sx9324_write_raw(struct iio_dev *indio_dev, static const struct sx_common_reg_default sx9324_default_regs[] = { { SX9324_REG_IRQ_MSK, 0x00 }, - { SX9324_REG_IRQ_CFG0, 0x00 }, - { SX9324_REG_IRQ_CFG1, SX9324_REG_IRQ_CFG1_FAILCOND }, - { SX9324_REG_IRQ_CFG2, 0x00 }, - { SX9324_REG_GNRL_CTRL0, SX9324_REG_GNRL_CTRL0_SCANPERIOD_100MS }, + { SX9324_REG_IRQ_CFG0, 0x00, "irq_cfg0" }, + { SX9324_REG_IRQ_CFG1, SX9324_REG_IRQ_CFG1_FAILCOND, "irq_cfg1" }, + { SX9324_REG_IRQ_CFG2, 0x00, "irq_cfg2" }, + { SX9324_REG_GNRL_CTRL0, SX9324_REG_GNRL_CTRL0_SCANPERIOD_100MS, "gnrl_ctrl0" }, /* * The lower 4 bits should not be set as it enable sensors measurements. * Turning the detection on before the configuration values are set to * good values can cause the device to return erroneous readings. */ - { SX9324_REG_GNRL_CTRL1, SX9324_REG_GNRL_CTRL1_PAUSECTRL }, + { SX9324_REG_GNRL_CTRL1, SX9324_REG_GNRL_CTRL1_PAUSECTRL, "gnrl_ctrl1" }, - { SX9324_REG_AFE_CTRL0, SX9324_REG_AFE_CTRL0_RINT_LOWEST }, - { SX9324_REG_AFE_CTRL3, 0x00 }, + { SX9324_REG_AFE_CTRL0, SX9324_REG_AFE_CTRL0_RINT_LOWEST, "afe_ctrl0" }, + { SX9324_REG_AFE_CTRL3, 0x00, "afe_ctrl3" }, { SX9324_REG_AFE_CTRL4, SX9324_REG_AFE_CTRL4_FREQ_83_33HZ | - SX9324_REG_AFE_CTRL4_RES_100 }, - { SX9324_REG_AFE_CTRL6, 0x00 }, + SX9324_REG_AFE_CTRL4_RES_100, "afe_ctrl4" }, + { SX9324_REG_AFE_CTRL6, 0x00, "afe_ctrl6" }, { SX9324_REG_AFE_CTRL7, SX9324_REG_AFE_CTRL4_FREQ_83_33HZ | - SX9324_REG_AFE_CTRL4_RES_100 }, + SX9324_REG_AFE_CTRL4_RES_100, "afe_ctrl7" }, /* TODO(gwendal): PHx use chip default or all grounded? */ - { SX9324_REG_AFE_PH0, 0x29 }, - { SX9324_REG_AFE_PH1, 0x26 }, - { SX9324_REG_AFE_PH2, 0x1a }, - { SX9324_REG_AFE_PH3, 0x16 }, + { SX9324_REG_AFE_PH0, 0x29, "afe_ph0" }, + { SX9324_REG_AFE_PH1, 0x26, "afe_ph1" }, + { SX9324_REG_AFE_PH2, 0x1a, "afe_ph2" }, + { SX9324_REG_AFE_PH3, 0x16, "afe_ph3" }, { SX9324_REG_AFE_CTRL8, SX9324_REG_AFE_CTRL8_RESERVED | - SX9324_REG_AFE_CTRL8_RESFILTIN_4KOHM }, - { SX9324_REG_AFE_CTRL9, SX9324_REG_AFE_CTRL9_AGAIN_1 }, + SX9324_REG_AFE_CTRL8_RESFILTIN_4KOHM, "afe_ctrl8" }, + { SX9324_REG_AFE_CTRL9, SX9324_REG_AFE_CTRL9_AGAIN_1, "afe_ctrl9" }, { SX9324_REG_PROX_CTRL0, SX9324_REG_PROX_CTRL0_GAIN_1 << SX9324_REG_PROX_CTRL0_GAIN_SHIFT | - SX9324_REG_PROX_CTRL0_RAWFILT_1P50 }, + SX9324_REG_PROX_CTRL0_RAWFILT_1P50, "prox_ctrl0" }, { SX9324_REG_PROX_CTRL1, SX9324_REG_PROX_CTRL0_GAIN_1 << SX9324_REG_PROX_CTRL0_GAIN_SHIFT | - SX9324_REG_PROX_CTRL0_RAWFILT_1P50 }, - { SX9324_REG_PROX_CTRL2, SX9324_REG_PROX_CTRL2_AVGNEG_THRESH_16K }, + SX9324_REG_PROX_CTRL0_RAWFILT_1P50, "prox_ctrl1" }, + { SX9324_REG_PROX_CTRL2, SX9324_REG_PROX_CTRL2_AVGNEG_THRESH_16K, "prox_ctrl2" }, { SX9324_REG_PROX_CTRL3, SX9324_REG_PROX_CTRL3_AVGDEB_2SAMPLES | - SX9324_REG_PROX_CTRL3_AVGPOS_THRESH_16K }, + SX9324_REG_PROX_CTRL3_AVGPOS_THRESH_16K, "prox_ctrl3" }, { SX9324_REG_PROX_CTRL4, SX9324_REG_PROX_CTRL4_AVGNEG_FILT_2 | - SX9324_REG_PROX_CTRL4_AVGPOS_FILT_256 }, - { SX9324_REG_PROX_CTRL5, 0x00 }, - { SX9324_REG_PROX_CTRL6, SX9324_REG_PROX_CTRL6_PROXTHRESH_32 }, - { SX9324_REG_PROX_CTRL7, SX9324_REG_PROX_CTRL6_PROXTHRESH_32 }, - { SX9324_REG_ADV_CTRL0, 0x00 }, - { SX9324_REG_ADV_CTRL1, 0x00 }, - { SX9324_REG_ADV_CTRL2, 0x00 }, - { SX9324_REG_ADV_CTRL3, 0x00 }, - { SX9324_REG_ADV_CTRL4, 0x00 }, + SX9324_REG_PROX_CTRL4_AVGPOS_FILT_256, "prox_ctrl4" }, + { SX9324_REG_PROX_CTRL5, 0x00, "prox_ctrl5" }, + { SX9324_REG_PROX_CTRL6, SX9324_REG_PROX_CTRL6_PROXTHRESH_32, "prox_ctrl6" }, + { SX9324_REG_PROX_CTRL7, SX9324_REG_PROX_CTRL6_PROXTHRESH_32, "prox_ctrl7" }, + { SX9324_REG_ADV_CTRL0, 0x00, "adv_ctrl0" }, + { SX9324_REG_ADV_CTRL1, 0x00, "adv_ctrl1" }, + { SX9324_REG_ADV_CTRL2, 0x00, "adv_ctrl2" }, + { SX9324_REG_ADV_CTRL3, 0x00, "adv_ctrl3" }, + { SX9324_REG_ADV_CTRL4, 0x00, "adv_ctrl4" }, { SX9324_REG_ADV_CTRL5, SX9324_REG_ADV_CTRL5_STARTUP_SENSOR_1 | - SX9324_REG_ADV_CTRL5_STARTUP_METHOD_1 }, - { SX9324_REG_ADV_CTRL6, 0x00 }, - { SX9324_REG_ADV_CTRL7, 0x00 }, - { SX9324_REG_ADV_CTRL8, 0x00 }, - { SX9324_REG_ADV_CTRL9, 0x00 }, + SX9324_REG_ADV_CTRL5_STARTUP_METHOD_1, "adv_ctrl5" }, + { SX9324_REG_ADV_CTRL6, 0x00, "adv_ctrl6" }, + { SX9324_REG_ADV_CTRL7, 0x00, "adv_ctrl7" }, + { SX9324_REG_ADV_CTRL8, 0x00, "adv_ctrl8" }, + { SX9324_REG_ADV_CTRL9, 0x00, "adv_ctrl9" }, /* Body/Table threshold */ - { SX9324_REG_ADV_CTRL10, 0x00 }, - { SX9324_REG_ADV_CTRL11, 0x00 }, - { SX9324_REG_ADV_CTRL12, 0x00 }, + { SX9324_REG_ADV_CTRL10, 0x00, "adv_ctrl10" }, + { SX9324_REG_ADV_CTRL11, 0x00, "adv_ctrl11" }, + { SX9324_REG_ADV_CTRL12, 0x00, "adv_ctrl12" }, /* TODO(gwendal): SAR currenly disabled */ - { SX9324_REG_ADV_CTRL13, 0x00 }, - { SX9324_REG_ADV_CTRL14, 0x00 }, - { SX9324_REG_ADV_CTRL15, 0x00 }, - { SX9324_REG_ADV_CTRL16, 0x00 }, - { SX9324_REG_ADV_CTRL17, 0x00 }, - { SX9324_REG_ADV_CTRL18, 0x00 }, - { SX9324_REG_ADV_CTRL19, SX9324_REG_ADV_CTRL19_HIGHT_FAILURE_THRESH_SATURATION }, - { SX9324_REG_ADV_CTRL20, SX9324_REG_ADV_CTRL19_HIGHT_FAILURE_THRESH_SATURATION }, + { SX9324_REG_ADV_CTRL13, 0x00, "adv_ctrl13" }, + { SX9324_REG_ADV_CTRL14, 0x00, "adv_ctrl14" }, + { SX9324_REG_ADV_CTRL15, 0x00, "adv_ctrl15" }, + { SX9324_REG_ADV_CTRL16, 0x00, "adv_ctrl16" }, + { SX9324_REG_ADV_CTRL17, 0x00, "adv_ctrl17" }, + { SX9324_REG_ADV_CTRL18, 0x00, "adv_ctrl18" }, + { SX9324_REG_ADV_CTRL19, + SX9324_REG_ADV_CTRL19_HIGHT_FAILURE_THRESH_SATURATION, "adv_ctrl19" }, + { SX9324_REG_ADV_CTRL20, + SX9324_REG_ADV_CTRL19_HIGHT_FAILURE_THRESH_SATURATION, "adv_ctrl20" }, }; /* Activate all channels and perform an initial compensation. */ @@ -889,13 +891,15 @@ sx9324_get_default_reg(struct device *dev, int idx, const char *res; memcpy(reg_def, &sx9324_default_regs[idx], sizeof(*reg_def)); + + sx_common_get_raw_register_config(dev, reg_def); switch (reg_def->reg) { case SX9324_REG_AFE_PH0: case SX9324_REG_AFE_PH1: case SX9324_REG_AFE_PH2: case SX9324_REG_AFE_PH3: ph = reg_def->reg - SX9324_REG_AFE_PH0; - scnprintf(prop, ARRAY_SIZE(prop), "semtech,ph%d-pin", ph); + snprintf(prop, ARRAY_SIZE(prop), "semtech,ph%d-pin", ph); count = device_property_count_u32(dev, prop); if (count != ARRAY_SIZE(pin_defs)) diff --git a/drivers/iio/proximity/sx9360.c b/drivers/iio/proximity/sx9360.c index 6e19d22e6a01..a50d9176411a 100644 --- a/drivers/iio/proximity/sx9360.c +++ b/drivers/iio/proximity/sx9360.c @@ -663,37 +663,37 @@ static int sx9360_write_raw(struct iio_dev *indio_dev, static const struct sx_common_reg_default sx9360_default_regs[] = { { SX9360_REG_IRQ_MSK, 0x00 }, - { SX9360_REG_IRQ_CFG, 0x00 }, + { SX9360_REG_IRQ_CFG, 0x00, "irq_cfg" }, /* * The lower 2 bits should not be set as it enable sensors measurements. * Turning the detection on before the configuration values are set to * good values can cause the device to return erroneous readings. */ - { SX9360_REG_GNRL_CTRL0, 0x00 }, - { SX9360_REG_GNRL_CTRL1, 0x00 }, - { SX9360_REG_GNRL_CTRL2, SX9360_REG_GNRL_CTRL2_PERIOD_102MS }, + { SX9360_REG_GNRL_CTRL0, 0x00, "gnrl_ctrl0" }, + { SX9360_REG_GNRL_CTRL1, 0x00, "gnrl_ctrl1" }, + { SX9360_REG_GNRL_CTRL2, SX9360_REG_GNRL_CTRL2_PERIOD_102MS, "gnrl_ctrl2" }, - { SX9360_REG_AFE_CTRL1, SX9360_REG_AFE_CTRL1_RESFILTIN_0OHMS }, + { SX9360_REG_AFE_CTRL1, SX9360_REG_AFE_CTRL1_RESFILTIN_0OHMS, "afe_ctrl0" }, { SX9360_REG_AFE_PARAM0_PHR, SX9360_REG_AFE_PARAM0_RSVD | - SX9360_REG_AFE_PARAM0_RESOLUTION_128 }, + SX9360_REG_AFE_PARAM0_RESOLUTION_128, "afe_param0_phr" }, { SX9360_REG_AFE_PARAM1_PHR, SX9360_REG_AFE_PARAM1_AGAIN_PHM_6PF | - SX9360_REG_AFE_PARAM1_FREQ_83_33HZ }, + SX9360_REG_AFE_PARAM1_FREQ_83_33HZ, "afe_param1_phr" }, { SX9360_REG_AFE_PARAM0_PHM, SX9360_REG_AFE_PARAM0_RSVD | - SX9360_REG_AFE_PARAM0_RESOLUTION_128 }, + SX9360_REG_AFE_PARAM0_RESOLUTION_128, "afe_param0_phm" }, { SX9360_REG_AFE_PARAM1_PHM, SX9360_REG_AFE_PARAM1_AGAIN_PHM_6PF | - SX9360_REG_AFE_PARAM1_FREQ_83_33HZ }, + SX9360_REG_AFE_PARAM1_FREQ_83_33HZ, "afe_param1_phm" }, { SX9360_REG_PROX_CTRL0_PHR, SX9360_REG_PROX_CTRL0_GAIN_1 | - SX9360_REG_PROX_CTRL0_RAWFILT_1P50 }, + SX9360_REG_PROX_CTRL0_RAWFILT_1P50, "prox_ctrl0_phr" }, { SX9360_REG_PROX_CTRL0_PHM, SX9360_REG_PROX_CTRL0_GAIN_1 | - SX9360_REG_PROX_CTRL0_RAWFILT_1P50 }, - { SX9360_REG_PROX_CTRL1, SX9360_REG_PROX_CTRL1_AVGNEG_THRESH_16K }, + SX9360_REG_PROX_CTRL0_RAWFILT_1P50, "prox_ctrl0_phm" }, + { SX9360_REG_PROX_CTRL1, SX9360_REG_PROX_CTRL1_AVGNEG_THRESH_16K, "prox_ctrl1" }, { SX9360_REG_PROX_CTRL2, SX9360_REG_PROX_CTRL2_AVGDEB_2SAMPLES | - SX9360_REG_PROX_CTRL2_AVGPOS_THRESH_16K }, + SX9360_REG_PROX_CTRL2_AVGPOS_THRESH_16K, "prox_ctrl2" }, { SX9360_REG_PROX_CTRL3, SX9360_REG_PROX_CTRL3_AVGNEG_FILT_2 | - SX9360_REG_PROX_CTRL3_AVGPOS_FILT_256 }, - { SX9360_REG_PROX_CTRL4, 0x00 }, - { SX9360_REG_PROX_CTRL5, SX9360_REG_PROX_CTRL5_PROXTHRESH_32 }, + SX9360_REG_PROX_CTRL3_AVGPOS_FILT_256, "prox_ctrl3" }, + { SX9360_REG_PROX_CTRL4, 0x00, "prox_ctrl4" }, + { SX9360_REG_PROX_CTRL5, SX9360_REG_PROX_CTRL5_PROXTHRESH_32, "prox_ctrl5" }, }; /* Activate all channels and perform an initial compensation. */ diff --git a/drivers/iio/proximity/sx9500.c b/drivers/iio/proximity/sx9500.c index 8794e75e5bf9..9b2cfcade6a4 100644 --- a/drivers/iio/proximity/sx9500.c +++ b/drivers/iio/proximity/sx9500.c @@ -1051,8 +1051,8 @@ MODULE_DEVICE_TABLE(i2c, sx9500_id); static struct i2c_driver sx9500_driver = { .driver = { .name = SX9500_DRIVER_NAME, - .acpi_match_table = ACPI_PTR(sx9500_acpi_match), - .of_match_table = of_match_ptr(sx9500_of_match), + .acpi_match_table = sx9500_acpi_match, + .of_match_table = sx9500_of_match, .pm = pm_sleep_ptr(&sx9500_pm_ops), }, .probe_new = sx9500_probe, diff --git a/drivers/iio/proximity/sx_common.c b/drivers/iio/proximity/sx_common.c index eba9256730ec..fe07d1444ac3 100644 --- a/drivers/iio/proximity/sx_common.c +++ b/drivers/iio/proximity/sx_common.c @@ -424,6 +424,27 @@ static const struct iio_buffer_setup_ops sx_common_buffer_setup_ops = { .postdisable = sx_common_buffer_postdisable, }; +void sx_common_get_raw_register_config(struct device *dev, + struct sx_common_reg_default *reg_def) +{ +#ifdef CONFIG_ACPI + struct acpi_device *adev = ACPI_COMPANION(dev); + u32 raw = 0, ret; + char prop[80]; + + if (!reg_def->property || !adev) + return; + + snprintf(prop, ARRAY_SIZE(prop), "%s,reg_%s", acpi_device_hid(adev), reg_def->property); + ret = device_property_read_u32(dev, prop, &raw); + if (ret) + return; + + reg_def->def = raw; +#endif +} +EXPORT_SYMBOL_NS_GPL(sx_common_get_raw_register_config, SEMTECH_PROX); + #define SX_COMMON_SOFT_RESET 0xde static int sx_common_init_device(struct device *dev, struct iio_dev *indio_dev) diff --git a/drivers/iio/proximity/sx_common.h b/drivers/iio/proximity/sx_common.h index 49d4517103b0..101b90e52ff2 100644 --- a/drivers/iio/proximity/sx_common.h +++ b/drivers/iio/proximity/sx_common.h @@ -8,6 +8,7 @@ #ifndef IIO_SX_COMMON_H #define IIO_SX_COMMON_H +#include <linux/acpi.h> #include <linux/iio/iio.h> #include <linux/iio/types.h> #include <linux/regulator/consumer.h> @@ -26,6 +27,7 @@ static_assert(SX_COMMON_MAX_NUM_CHANNELS < BITS_PER_LONG); struct sx_common_reg_default { u8 reg; u8 def; + const char *property; }; /** @@ -101,7 +103,6 @@ struct sx_common_chip_info { * @client: I2C client structure. * @trig: IIO trigger object. * @regmap: Register map. - * @num_default_regs: Number of default registers to set at init. * @chan_prox_stat: Last reading of the proximity status for each channel. * We only send an event to user space when this changes. * @trigger_enabled: True when the device trigger is enabled. @@ -149,6 +150,9 @@ int sx_common_probe(struct i2c_client *client, const struct sx_common_chip_info *chip_info, const struct regmap_config *regmap_config); +void sx_common_get_raw_register_config(struct device *dev, + struct sx_common_reg_default *reg_def); + /* 3 is the number of events defined by a single phase. */ extern const struct iio_event_spec sx_common_events[3]; diff --git a/drivers/iio/temperature/tmp117.c b/drivers/iio/temperature/tmp117.c index f9b8f2b570f6..638e3a5bd6b8 100644 --- a/drivers/iio/temperature/tmp117.c +++ b/drivers/iio/temperature/tmp117.c @@ -16,6 +16,7 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/limits.h> +#include <linux/property.h> #include <linux/iio/iio.h> @@ -31,17 +32,19 @@ #define TMP117_REG_DEVICE_ID 0xF #define TMP117_RESOLUTION_10UC 78125 -#define TMP117_DEVICE_ID 0x0117 #define MICRODEGREE_PER_10MILLIDEGREE 10000 +#define TMP116_DEVICE_ID 0x1116 +#define TMP117_DEVICE_ID 0x0117 + struct tmp117_data { struct i2c_client *client; s16 calibbias; }; static int tmp117_read_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *channel, int *val, - int *val2, long mask) + struct iio_chan_spec const *channel, int *val, + int *val2, long mask) { struct tmp117_data *data = iio_priv(indio_dev); s32 ret; @@ -49,7 +52,7 @@ static int tmp117_read_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_RAW: ret = i2c_smbus_read_word_swapped(data->client, - TMP117_REG_TEMP); + TMP117_REG_TEMP); if (ret < 0) return ret; *val = sign_extend32(ret, 15); @@ -57,7 +60,7 @@ static int tmp117_read_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_CALIBBIAS: ret = i2c_smbus_read_word_swapped(data->client, - TMP117_REG_TEMP_OFFSET); + TMP117_REG_TEMP_OFFSET); if (ret < 0) return ret; *val = sign_extend32(ret, 15); @@ -79,9 +82,8 @@ static int tmp117_read_raw(struct iio_dev *indio_dev, } } -static int tmp117_write_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *channel, int val, - int val2, long mask) +static int tmp117_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec + const *channel, int val, int val2, long mask) { struct tmp117_data *data = iio_priv(indio_dev); s16 off; @@ -104,7 +106,16 @@ static const struct iio_chan_spec tmp117_channels[] = { { .type = IIO_TEMP, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | - BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_SCALE), + BIT(IIO_CHAN_INFO_CALIBBIAS) | + BIT(IIO_CHAN_INFO_SCALE), + }, +}; + +static const struct iio_chan_spec tmp116_channels[] = { + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), }, }; @@ -115,23 +126,41 @@ static const struct iio_info tmp117_info = { static int tmp117_identify(struct i2c_client *client) { + const struct i2c_device_id *id; + unsigned long match_data; int dev_id; dev_id = i2c_smbus_read_word_swapped(client, TMP117_REG_DEVICE_ID); if (dev_id < 0) return dev_id; - if (dev_id != TMP117_DEVICE_ID) { - dev_err(&client->dev, "TMP117 not found\n"); - return -ENODEV; + + switch (dev_id) { + case TMP116_DEVICE_ID: + case TMP117_DEVICE_ID: + return dev_id; } - return 0; + + dev_info(&client->dev, "Unknown device id (0x%x), use fallback compatible\n", + dev_id); + + match_data = (uintptr_t)device_get_match_data(&client->dev); + if (match_data) + return match_data; + + id = i2c_client_get_device_id(client); + if (id) + return id->driver_data; + + dev_err(&client->dev, "Failed to identify unsupported device\n"); + + return -ENODEV; } static int tmp117_probe(struct i2c_client *client) { struct tmp117_data *data; struct iio_dev *indio_dev; - int ret; + int ret, dev_id; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) return -EOPNOTSUPP; @@ -140,6 +169,8 @@ static int tmp117_probe(struct i2c_client *client) if (ret < 0) return ret; + dev_id = ret; + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; @@ -148,24 +179,35 @@ static int tmp117_probe(struct i2c_client *client) data->client = client; data->calibbias = 0; - indio_dev->name = "tmp117"; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &tmp117_info; - indio_dev->channels = tmp117_channels; - indio_dev->num_channels = ARRAY_SIZE(tmp117_channels); + switch (dev_id) { + case TMP116_DEVICE_ID: + indio_dev->channels = tmp116_channels; + indio_dev->num_channels = ARRAY_SIZE(tmp116_channels); + indio_dev->name = "tmp116"; + break; + case TMP117_DEVICE_ID: + indio_dev->channels = tmp117_channels; + indio_dev->num_channels = ARRAY_SIZE(tmp117_channels); + indio_dev->name = "tmp117"; + break; + } return devm_iio_device_register(&client->dev, indio_dev); } static const struct of_device_id tmp117_of_match[] = { - { .compatible = "ti,tmp117", }, + { .compatible = "ti,tmp116", .data = (void *)TMP116_DEVICE_ID }, + { .compatible = "ti,tmp117", .data = (void *)TMP117_DEVICE_ID }, { } }; MODULE_DEVICE_TABLE(of, tmp117_of_match); static const struct i2c_device_id tmp117_id[] = { - { "tmp117", 0 }, + { "tmp116", TMP116_DEVICE_ID }, + { "tmp117", TMP117_DEVICE_ID }, { } }; MODULE_DEVICE_TABLE(i2c, tmp117_id); diff --git a/drivers/iio/trigger/iio-trig-loop.c b/drivers/iio/trigger/iio-trig-loop.c index 96ec06bbe546..7aaed0611899 100644 --- a/drivers/iio/trigger/iio-trig-loop.c +++ b/drivers/iio/trigger/iio-trig-loop.c @@ -46,7 +46,7 @@ static int iio_loop_thread(void *data) set_freezable(); do { - iio_trigger_poll_chained(trig); + iio_trigger_poll_nested(trig); } while (likely(!kthread_freezable_should_stop(NULL))); return 0; diff --git a/drivers/interconnect/core.c b/drivers/interconnect/core.c index 7a24c1444ace..0edf85ba055e 100644 --- a/drivers/interconnect/core.c +++ b/drivers/interconnect/core.c @@ -451,7 +451,7 @@ struct icc_path *of_icc_get_by_index(struct device *dev, int idx) * When the consumer DT node do not have "interconnects" property * return a NULL path to skip setting constraints. */ - if (!of_find_property(np, "interconnects", NULL)) + if (!of_property_present(np, "interconnects")) return NULL; /* @@ -544,7 +544,7 @@ struct icc_path *of_icc_get(struct device *dev, const char *name) * When the consumer DT node do not have "interconnects" property * return a NULL path to skip setting constraints. */ - if (!of_find_property(np, "interconnects", NULL)) + if (!of_property_present(np, "interconnects")) return NULL; /* @@ -911,52 +911,6 @@ out: EXPORT_SYMBOL_GPL(icc_link_create); /** - * icc_link_destroy() - destroy a link between two nodes - * @src: pointer to source node - * @dst: pointer to destination node - * - * Return: 0 on success, or an error code otherwise - */ -int icc_link_destroy(struct icc_node *src, struct icc_node *dst) -{ - struct icc_node **new; - size_t slot; - int ret = 0; - - if (IS_ERR_OR_NULL(src)) - return -EINVAL; - - if (IS_ERR_OR_NULL(dst)) - return -EINVAL; - - mutex_lock(&icc_lock); - - for (slot = 0; slot < src->num_links; slot++) - if (src->links[slot] == dst) - break; - - if (WARN_ON(slot == src->num_links)) { - ret = -ENXIO; - goto out; - } - - src->links[slot] = src->links[--src->num_links]; - - new = krealloc(src->links, src->num_links * sizeof(*src->links), - GFP_KERNEL); - if (new) - src->links = new; - else - ret = -ENOMEM; - -out: - mutex_unlock(&icc_lock); - - return ret; -} -EXPORT_SYMBOL_GPL(icc_link_destroy); - -/** * icc_node_add() - add interconnect node to interconnect provider * @node: pointer to the interconnect node * @provider: pointer to the interconnect provider @@ -981,14 +935,17 @@ void icc_node_add(struct icc_node *node, struct icc_provider *provider) node->avg_bw = node->init_avg; node->peak_bw = node->init_peak; - if (provider->pre_aggregate) - provider->pre_aggregate(node); + if (node->avg_bw || node->peak_bw) { + if (provider->pre_aggregate) + provider->pre_aggregate(node); - if (provider->aggregate) - provider->aggregate(node, 0, node->init_avg, node->init_peak, - &node->avg_bw, &node->peak_bw); + if (provider->aggregate) + provider->aggregate(node, 0, node->init_avg, node->init_peak, + &node->avg_bw, &node->peak_bw); + if (provider->set) + provider->set(node, node); + } - provider->set(node, node); node->avg_bw = 0; node->peak_bw = 0; @@ -1081,22 +1038,6 @@ void icc_provider_deregister(struct icc_provider *provider) } EXPORT_SYMBOL_GPL(icc_provider_deregister); -int icc_provider_add(struct icc_provider *provider) -{ - icc_provider_init(provider); - - return icc_provider_register(provider); -} -EXPORT_SYMBOL_GPL(icc_provider_add); - -void icc_provider_del(struct icc_provider *provider) -{ - WARN_ON(!list_empty(&provider->nodes)); - - icc_provider_deregister(provider); -} -EXPORT_SYMBOL_GPL(icc_provider_del); - static const struct of_device_id __maybe_unused ignore_list[] = { { .compatible = "qcom,sc7180-ipa-virt" }, { .compatible = "qcom,sc8180x-ipa-virt" }, diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig index 92d65c7bda23..825b647d9169 100644 --- a/drivers/interconnect/qcom/Kconfig +++ b/drivers/interconnect/qcom/Kconfig @@ -83,7 +83,7 @@ config INTERCONNECT_QCOM_RPMH_POSSIBLE default INTERCONNECT_QCOM depends on QCOM_RPMH || (COMPILE_TEST && !QCOM_RPMH) depends on QCOM_COMMAND_DB || (COMPILE_TEST && !QCOM_COMMAND_DB) - depends on OF || COMPILE_TEST + depends on OF help Compile-testing RPMH drivers is possible on other platforms, but in order to avoid link failures, drivers must not be built-in diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c index 4180a06681b2..5341fa169dbf 100644 --- a/drivers/interconnect/qcom/icc-rpm.c +++ b/drivers/interconnect/qcom/icc-rpm.c @@ -11,7 +11,6 @@ #include <linux/of_device.h> #include <linux/of_platform.h> #include <linux/platform_device.h> -#include <linux/pm_domain.h> #include <linux/regmap.h> #include <linux/slab.h> @@ -48,6 +47,9 @@ #define NOC_QOS_MODEn_ADDR(n) (0xc + (n * 0x1000)) #define NOC_QOS_MODEn_MASK 0x3 +#define NOC_QOS_MODE_FIXED_VAL 0x0 +#define NOC_QOS_MODE_BYPASS_VAL 0x2 + static int qcom_icc_set_qnoc_qos(struct icc_node *src, u64 max_bw) { struct icc_provider *provider = src->provider; @@ -153,7 +155,7 @@ static int qcom_icc_set_noc_qos(struct icc_node *src, u64 max_bw) struct qcom_icc_provider *qp; struct qcom_icc_node *qn; struct icc_provider *provider; - u32 mode = NOC_QOS_MODE_BYPASS; + u32 mode = NOC_QOS_MODE_BYPASS_VAL; int rc = 0; qn = src->data; @@ -167,18 +169,17 @@ static int qcom_icc_set_noc_qos(struct icc_node *src, u64 max_bw) return 0; } - if (qn->qos.qos_mode != NOC_QOS_MODE_INVALID) - mode = qn->qos.qos_mode; - - if (mode == NOC_QOS_MODE_FIXED) { - dev_dbg(src->provider->dev, "NoC QoS: %s: Set Fixed mode\n", - qn->name); + if (qn->qos.qos_mode == NOC_QOS_MODE_FIXED) { + dev_dbg(src->provider->dev, "NoC QoS: %s: Set Fixed mode\n", qn->name); + mode = NOC_QOS_MODE_FIXED_VAL; rc = qcom_icc_noc_set_qos_priority(qp, &qn->qos); if (rc) return rc; - } else if (mode == NOC_QOS_MODE_BYPASS) { - dev_dbg(src->provider->dev, "NoC QoS: %s: Set Bypass mode\n", - qn->name); + } else if (qn->qos.qos_mode == NOC_QOS_MODE_BYPASS) { + dev_dbg(src->provider->dev, "NoC QoS: %s: Set Bypass mode\n", qn->name); + mode = NOC_QOS_MODE_BYPASS_VAL; + } else { + /* How did we get here? */ } return regmap_update_bits(qp->regmap, @@ -244,7 +245,7 @@ static int __qcom_icc_set(struct icc_node *n, struct qcom_icc_node *qn, ret = qcom_icc_rpm_set(qn->mas_rpm_id, qn->slv_rpm_id, sum_bw); if (ret) return ret; - } else if (qn->qos.qos_mode != -1) { + } else if (qn->qos.qos_mode != NOC_QOS_MODE_INVALID) { /* set bandwidth directly from the AP */ ret = qcom_icc_qos_set(n, sum_bw); if (ret) @@ -315,6 +316,7 @@ static void qcom_icc_bus_aggregate(struct icc_provider *provider, { struct icc_node *node; struct qcom_icc_node *qn; + u64 sum_avg[QCOM_ICC_NUM_BUCKETS]; int i; /* Initialise aggregate values */ @@ -332,7 +334,11 @@ static void qcom_icc_bus_aggregate(struct icc_provider *provider, list_for_each_entry(node, &provider->nodes, node_list) { qn = node->data; for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) { - agg_avg[i] += qn->sum_avg[i]; + if (qn->channels) + sum_avg[i] = div_u64(qn->sum_avg[i], qn->channels); + else + sum_avg[i] = qn->sum_avg[i]; + agg_avg[i] += sum_avg[i]; agg_peak[i] = max_t(u64, agg_peak[i], qn->max_peak[i]); } } @@ -496,12 +502,6 @@ regmap_done: if (ret) return ret; - if (desc->has_bus_pd) { - ret = dev_pm_domain_attach(dev, true); - if (ret) - return ret; - } - provider = &qp->provider; provider->dev = dev; provider->set = qcom_icc_set; diff --git a/drivers/interconnect/qcom/icc-rpm.h b/drivers/interconnect/qcom/icc-rpm.h index a49af844ab13..22bdb1e4bb12 100644 --- a/drivers/interconnect/qcom/icc-rpm.h +++ b/drivers/interconnect/qcom/icc-rpm.h @@ -23,12 +23,12 @@ enum qcom_icc_type { /** * struct qcom_icc_provider - Qualcomm specific interconnect provider * @provider: generic interconnect provider - * @bus_clks: the clk_bulk_data table of bus clocks * @num_clks: the total number of clk_bulk_data entries * @type: the ICC provider type - * @qos_offset: offset to QoS registers * @regmap: regmap for QoS registers read/write access + * @qos_offset: offset to QoS registers * @bus_clk_rate: bus clock rate in Hz + * @bus_clks: the clk_bulk_data table of bus clocks */ struct qcom_icc_provider { struct icc_provider provider; @@ -66,6 +66,7 @@ struct qcom_icc_qos { * @id: a unique node identifier * @links: an array of nodes where we can go next while traversing * @num_links: the total number of @links + * @channels: number of channels at this node (e.g. DDR channels) * @buswidth: width of the interconnect between a node and the bus (bytes) * @sum_avg: current sum aggregate value of all avg bw requests * @max_peak: current max aggregate value of all peak bw requests @@ -78,6 +79,7 @@ struct qcom_icc_node { u16 id; const u16 *links; u16 num_links; + u16 channels; u16 buswidth; u64 sum_avg[QCOM_ICC_NUM_BUCKETS]; u64 max_peak[QCOM_ICC_NUM_BUCKETS]; @@ -91,16 +93,17 @@ struct qcom_icc_desc { size_t num_nodes; const char * const *clocks; size_t num_clocks; - bool has_bus_pd; enum qcom_icc_type type; const struct regmap_config *regmap_cfg; unsigned int qos_offset; }; -/* Valid for both NoC and BIMC */ -#define NOC_QOS_MODE_INVALID -1 -#define NOC_QOS_MODE_FIXED 0x0 -#define NOC_QOS_MODE_BYPASS 0x2 +/* Valid for all bus types */ +enum qos_mode { + NOC_QOS_MODE_INVALID = 0, + NOC_QOS_MODE_FIXED, + NOC_QOS_MODE_BYPASS, +}; int qnoc_probe(struct platform_device *pdev); int qnoc_remove(struct platform_device *pdev); diff --git a/drivers/interconnect/qcom/msm8996.c b/drivers/interconnect/qcom/msm8996.c index 25a1a32bc611..14efd2761b7a 100644 --- a/drivers/interconnect/qcom/msm8996.c +++ b/drivers/interconnect/qcom/msm8996.c @@ -1823,7 +1823,6 @@ static const struct qcom_icc_desc msm8996_a0noc = { .num_nodes = ARRAY_SIZE(a0noc_nodes), .clocks = bus_a0noc_clocks, .num_clocks = ARRAY_SIZE(bus_a0noc_clocks), - .has_bus_pd = true, .regmap_cfg = &msm8996_a0noc_regmap_config }; diff --git a/drivers/interconnect/qcom/osm-l3.c b/drivers/interconnect/qcom/osm-l3.c index 1bafb54f1432..a1f4f918b911 100644 --- a/drivers/interconnect/qcom/osm-l3.c +++ b/drivers/interconnect/qcom/osm-l3.c @@ -14,13 +14,6 @@ #include <dt-bindings/interconnect/qcom,osm-l3.h> -#include "sc7180.h" -#include "sc7280.h" -#include "sc8180x.h" -#include "sdm845.h" -#include "sm8150.h" -#include "sm8250.h" - #define LUT_MAX_ENTRIES 40U #define LUT_SRC GENMASK(31, 30) #define LUT_L_VAL GENMASK(7, 0) diff --git a/drivers/interconnect/qcom/sc7180.h b/drivers/interconnect/qcom/sc7180.h index 7a2b3eb00923..2b718922c109 100644 --- a/drivers/interconnect/qcom/sc7180.h +++ b/drivers/interconnect/qcom/sc7180.h @@ -145,7 +145,5 @@ #define SC7180_SLAVE_SERVICE_SNOC 134 #define SC7180_SLAVE_QDSS_STM 135 #define SC7180_SLAVE_TCU 136 -#define SC7180_MASTER_OSM_L3_APPS 137 -#define SC7180_SLAVE_OSM_L3 138 #endif diff --git a/drivers/interconnect/qcom/sc7280.h b/drivers/interconnect/qcom/sc7280.h index 1fb9839b2c14..175e400305c5 100644 --- a/drivers/interconnect/qcom/sc7280.h +++ b/drivers/interconnect/qcom/sc7280.h @@ -150,7 +150,5 @@ #define SC7280_SLAVE_PCIE_1 139 #define SC7280_SLAVE_QDSS_STM 140 #define SC7280_SLAVE_TCU 141 -#define SC7280_MASTER_EPSS_L3_APPS 142 -#define SC7280_SLAVE_EPSS_L3 143 #endif diff --git a/drivers/interconnect/qcom/sc8180x.h b/drivers/interconnect/qcom/sc8180x.h index c138dcd350f1..f8d90598335a 100644 --- a/drivers/interconnect/qcom/sc8180x.h +++ b/drivers/interconnect/qcom/sc8180x.h @@ -168,8 +168,6 @@ #define SC8180X_SLAVE_EBI_CH0_DISPLAY 158 #define SC8180X_SLAVE_MNOC_SF_MEM_NOC_DISPLAY 159 #define SC8180X_SLAVE_MNOC_HF_MEM_NOC_DISPLAY 160 -#define SC8180X_MASTER_OSM_L3_APPS 161 -#define SC8180X_SLAVE_OSM_L3 162 #define SC8180X_MASTER_QUP_CORE_0 163 #define SC8180X_MASTER_QUP_CORE_1 164 diff --git a/drivers/interconnect/qcom/sdm845.h b/drivers/interconnect/qcom/sdm845.h index 776e9c2acb27..bc7e425ce985 100644 --- a/drivers/interconnect/qcom/sdm845.h +++ b/drivers/interconnect/qcom/sdm845.h @@ -136,7 +136,5 @@ #define SDM845_SLAVE_SERVICE_SNOC 128 #define SDM845_SLAVE_QDSS_STM 129 #define SDM845_SLAVE_TCU 130 -#define SDM845_MASTER_OSM_L3_APPS 131 -#define SDM845_SLAVE_OSM_L3 132 #endif /* __DRIVERS_INTERCONNECT_QCOM_SDM845_H__ */ diff --git a/drivers/interconnect/qcom/sm8150.h b/drivers/interconnect/qcom/sm8150.h index 023161681fb8..1d587c94eb06 100644 --- a/drivers/interconnect/qcom/sm8150.h +++ b/drivers/interconnect/qcom/sm8150.h @@ -148,7 +148,5 @@ #define SM8150_SLAVE_VSENSE_CTRL_CFG 137 #define SM8150_SNOC_CNOC_MAS 138 #define SM8150_SNOC_CNOC_SLV 139 -#define SM8150_MASTER_OSM_L3_APPS 140 -#define SM8150_SLAVE_OSM_L3 141 #endif diff --git a/drivers/interconnect/qcom/sm8250.h b/drivers/interconnect/qcom/sm8250.h index e3fc56bc7ca0..209ab195f21f 100644 --- a/drivers/interconnect/qcom/sm8250.h +++ b/drivers/interconnect/qcom/sm8250.h @@ -158,7 +158,5 @@ #define SM8250_SLAVE_VSENSE_CTRL_CFG 147 #define SM8250_SNOC_CNOC_MAS 148 #define SM8250_SNOC_CNOC_SLV 149 -#define SM8250_MASTER_EPSS_L3_APPS 150 -#define SM8250_SLAVE_EPSS_L3 151 #endif diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c index 0b5e181998c9..807c98de40d4 100644 --- a/drivers/iommu/iommu.c +++ b/drivers/iommu/iommu.c @@ -28,6 +28,7 @@ #include <linux/fsl/mc.h> #include <linux/module.h> #include <linux/cc_platform.h> +#include <linux/cdx/cdx_bus.h> #include <trace/events/iommu.h> #include <linux/sched/mm.h> #include <linux/msi.h> @@ -129,6 +130,9 @@ static struct bus_type * const iommu_buses[] = { #ifdef CONFIG_TEGRA_HOST1X_CONTEXT_BUS &host1x_context_device_bus_type, #endif +#ifdef CONFIG_CDX_BUS + &cdx_bus_type, +#endif }; /* diff --git a/drivers/mcb/mcb-lpc.c b/drivers/mcb/mcb-lpc.c index 53decd89876e..a851e0236464 100644 --- a/drivers/mcb/mcb-lpc.c +++ b/drivers/mcb/mcb-lpc.c @@ -23,7 +23,7 @@ static int mcb_lpc_probe(struct platform_device *pdev) { struct resource *res; struct priv *priv; - int ret = 0; + int ret = 0, table_size; priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) @@ -58,16 +58,43 @@ static int mcb_lpc_probe(struct platform_device *pdev) ret = chameleon_parse_cells(priv->bus, priv->mem->start, priv->base); if (ret < 0) { - mcb_release_bus(priv->bus); - return ret; + goto out_mcb_bus; } - dev_dbg(&pdev->dev, "Found %d cells\n", ret); + table_size = ret; + + if (table_size < CHAM_HEADER_SIZE) { + /* Release the previous resources */ + devm_iounmap(&pdev->dev, priv->base); + devm_release_mem_region(&pdev->dev, priv->mem->start, resource_size(priv->mem)); + + /* Then, allocate it again with the actual chameleon table size */ + res = devm_request_mem_region(&pdev->dev, priv->mem->start, + table_size, + KBUILD_MODNAME); + if (!res) { + dev_err(&pdev->dev, "Failed to request PCI memory\n"); + ret = -EBUSY; + goto out_mcb_bus; + } + + priv->base = devm_ioremap(&pdev->dev, priv->mem->start, table_size); + if (!priv->base) { + dev_err(&pdev->dev, "Cannot ioremap\n"); + ret = -ENOMEM; + goto out_mcb_bus; + } + + platform_set_drvdata(pdev, priv); + } mcb_bus_add_devices(priv->bus); return 0; +out_mcb_bus: + mcb_release_bus(priv->bus); + return ret; } static int mcb_lpc_remove(struct platform_device *pdev) diff --git a/drivers/mcb/mcb-parse.c b/drivers/mcb/mcb-parse.c index aa6938da0db8..2aef990f379f 100644 --- a/drivers/mcb/mcb-parse.c +++ b/drivers/mcb/mcb-parse.c @@ -130,7 +130,7 @@ static void chameleon_parse_bar(void __iomem *base, } } -static int chameleon_get_bar(char __iomem **base, phys_addr_t mapbase, +static int chameleon_get_bar(void __iomem **base, phys_addr_t mapbase, struct chameleon_bar **cb) { struct chameleon_bar *c; @@ -179,12 +179,13 @@ int chameleon_parse_cells(struct mcb_bus *bus, phys_addr_t mapbase, { struct chameleon_fpga_header *header; struct chameleon_bar *cb; - char __iomem *p = base; + void __iomem *p = base; int num_cells = 0; uint32_t dtype; int bar_count; int ret; u32 hsize; + u32 table_size; hsize = sizeof(struct chameleon_fpga_header); @@ -239,12 +240,16 @@ int chameleon_parse_cells(struct mcb_bus *bus, phys_addr_t mapbase, num_cells++; } - if (num_cells == 0) - num_cells = -EINVAL; + if (num_cells == 0) { + ret = -EINVAL; + goto free_bar; + } + table_size = p - base; + pr_debug("%d cell(s) found. Chameleon table size: 0x%04x bytes\n", num_cells, table_size); kfree(cb); kfree(header); - return num_cells; + return table_size; free_bar: kfree(cb); diff --git a/drivers/mcb/mcb-pci.c b/drivers/mcb/mcb-pci.c index dc88232d9af8..53d9202ff9a7 100644 --- a/drivers/mcb/mcb-pci.c +++ b/drivers/mcb/mcb-pci.c @@ -31,7 +31,7 @@ static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct resource *res; struct priv *priv; - int ret; + int ret, table_size; unsigned long flags; priv = devm_kzalloc(&pdev->dev, sizeof(struct priv), GFP_KERNEL); @@ -90,7 +90,30 @@ static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (ret < 0) goto out_mcb_bus; - dev_dbg(&pdev->dev, "Found %d cells\n", ret); + table_size = ret; + + if (table_size < CHAM_HEADER_SIZE) { + /* Release the previous resources */ + devm_iounmap(&pdev->dev, priv->base); + devm_release_mem_region(&pdev->dev, priv->mapbase, CHAM_HEADER_SIZE); + + /* Then, allocate it again with the actual chameleon table size */ + res = devm_request_mem_region(&pdev->dev, priv->mapbase, + table_size, + KBUILD_MODNAME); + if (!res) { + dev_err(&pdev->dev, "Failed to request PCI memory\n"); + ret = -EBUSY; + goto out_mcb_bus; + } + + priv->base = devm_ioremap(&pdev->dev, priv->mapbase, table_size); + if (!priv->base) { + dev_err(&pdev->dev, "Cannot ioremap\n"); + ret = -ENOMEM; + goto out_mcb_bus; + } + } mcb_bus_add_devices(priv->bus); diff --git a/drivers/misc/cardreader/alcor_pci.c b/drivers/misc/cardreader/alcor_pci.c index 9080f9f150a2..0142c4bf4f42 100644 --- a/drivers/misc/cardreader/alcor_pci.c +++ b/drivers/misc/cardreader/alcor_pci.c @@ -95,160 +95,6 @@ u32 alcor_read32be(struct alcor_pci_priv *priv, unsigned int addr) } EXPORT_SYMBOL_GPL(alcor_read32be); -static int alcor_pci_find_cap_offset(struct alcor_pci_priv *priv, - struct pci_dev *pci) -{ - int where; - u8 val8; - u32 val32; - - where = ALCOR_CAP_START_OFFSET; - pci_read_config_byte(pci, where, &val8); - if (!val8) - return 0; - - where = (int)val8; - while (1) { - pci_read_config_dword(pci, where, &val32); - if (val32 == 0xffffffff) { - dev_dbg(priv->dev, "find_cap_offset invalid value %x.\n", - val32); - return 0; - } - - if ((val32 & 0xff) == 0x10) { - dev_dbg(priv->dev, "pcie cap offset: %x\n", where); - return where; - } - - if ((val32 & 0xff00) == 0x00) { - dev_dbg(priv->dev, "pci_find_cap_offset invalid value %x.\n", - val32); - break; - } - where = (int)((val32 >> 8) & 0xff); - } - - return 0; -} - -static void alcor_pci_init_check_aspm(struct alcor_pci_priv *priv) -{ - struct pci_dev *pci; - int where; - u32 val32; - - priv->pdev_cap_off = alcor_pci_find_cap_offset(priv, priv->pdev); - /* - * A device might be attached to root complex directly and - * priv->parent_pdev will be NULL. In this case we don't check its - * capability and disable ASPM completely. - */ - if (priv->parent_pdev) - priv->parent_cap_off = alcor_pci_find_cap_offset(priv, - priv->parent_pdev); - - if ((priv->pdev_cap_off == 0) || (priv->parent_cap_off == 0)) { - dev_dbg(priv->dev, "pci_cap_off: %x, parent_cap_off: %x\n", - priv->pdev_cap_off, priv->parent_cap_off); - return; - } - - /* link capability */ - pci = priv->pdev; - where = priv->pdev_cap_off + ALCOR_PCIE_LINK_CAP_OFFSET; - pci_read_config_dword(pci, where, &val32); - priv->pdev_aspm_cap = (u8)(val32 >> 10) & 0x03; - - pci = priv->parent_pdev; - where = priv->parent_cap_off + ALCOR_PCIE_LINK_CAP_OFFSET; - pci_read_config_dword(pci, where, &val32); - priv->parent_aspm_cap = (u8)(val32 >> 10) & 0x03; - - if (priv->pdev_aspm_cap != priv->parent_aspm_cap) { - u8 aspm_cap; - - dev_dbg(priv->dev, "pdev_aspm_cap: %x, parent_aspm_cap: %x\n", - priv->pdev_aspm_cap, priv->parent_aspm_cap); - aspm_cap = priv->pdev_aspm_cap & priv->parent_aspm_cap; - priv->pdev_aspm_cap = aspm_cap; - priv->parent_aspm_cap = aspm_cap; - } - - dev_dbg(priv->dev, "ext_config_dev_aspm: %x, pdev_aspm_cap: %x\n", - priv->ext_config_dev_aspm, priv->pdev_aspm_cap); - priv->ext_config_dev_aspm &= priv->pdev_aspm_cap; -} - -static void alcor_pci_aspm_ctrl(struct alcor_pci_priv *priv, u8 aspm_enable) -{ - struct pci_dev *pci; - u8 aspm_ctrl, i; - int where; - u32 val32; - - if ((!priv->pdev_cap_off) || (!priv->parent_cap_off)) { - dev_dbg(priv->dev, "pci_cap_off: %x, parent_cap_off: %x\n", - priv->pdev_cap_off, priv->parent_cap_off); - return; - } - - if (!priv->pdev_aspm_cap) - return; - - aspm_ctrl = 0; - if (aspm_enable) { - aspm_ctrl = priv->ext_config_dev_aspm; - - if (!aspm_ctrl) { - dev_dbg(priv->dev, "aspm_ctrl == 0\n"); - return; - } - } - - for (i = 0; i < 2; i++) { - - if (i) { - pci = priv->parent_pdev; - where = priv->parent_cap_off - + ALCOR_PCIE_LINK_CTRL_OFFSET; - } else { - pci = priv->pdev; - where = priv->pdev_cap_off - + ALCOR_PCIE_LINK_CTRL_OFFSET; - } - - pci_read_config_dword(pci, where, &val32); - val32 &= (~0x03); - val32 |= (aspm_ctrl & priv->pdev_aspm_cap); - pci_write_config_byte(pci, where, (u8)val32); - } - -} - -static inline void alcor_mask_sd_irqs(struct alcor_pci_priv *priv) -{ - alcor_write32(priv, 0, AU6601_REG_INT_ENABLE); -} - -static inline void alcor_unmask_sd_irqs(struct alcor_pci_priv *priv) -{ - alcor_write32(priv, AU6601_INT_CMD_MASK | AU6601_INT_DATA_MASK | - AU6601_INT_CARD_INSERT | AU6601_INT_CARD_REMOVE | - AU6601_INT_OVER_CURRENT_ERR, - AU6601_REG_INT_ENABLE); -} - -static inline void alcor_mask_ms_irqs(struct alcor_pci_priv *priv) -{ - alcor_write32(priv, 0, AU6601_MS_INT_ENABLE); -} - -static inline void alcor_unmask_ms_irqs(struct alcor_pci_priv *priv) -{ - alcor_write32(priv, 0x3d00fa, AU6601_MS_INT_ENABLE); -} - static int alcor_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -308,7 +154,6 @@ static int alcor_pci_probe(struct pci_dev *pdev, pci_set_master(pdev); pci_set_drvdata(pdev, priv); - alcor_pci_init_check_aspm(priv); for (i = 0; i < ARRAY_SIZE(alcor_pci_cells); i++) { alcor_pci_cells[i].platform_data = priv; @@ -319,7 +164,7 @@ static int alcor_pci_probe(struct pci_dev *pdev, if (ret < 0) goto error_clear_drvdata; - alcor_pci_aspm_ctrl(priv, 0); + pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1); return 0; @@ -339,8 +184,6 @@ static void alcor_pci_remove(struct pci_dev *pdev) priv = pci_get_drvdata(pdev); - alcor_pci_aspm_ctrl(priv, 1); - mfd_remove_devices(&pdev->dev); ida_free(&alcor_pci_idr, priv->id); @@ -353,18 +196,16 @@ static void alcor_pci_remove(struct pci_dev *pdev) #ifdef CONFIG_PM_SLEEP static int alcor_suspend(struct device *dev) { - struct alcor_pci_priv *priv = dev_get_drvdata(dev); - - alcor_pci_aspm_ctrl(priv, 1); return 0; } static int alcor_resume(struct device *dev) { - struct alcor_pci_priv *priv = dev_get_drvdata(dev); - alcor_pci_aspm_ctrl(priv, 0); + pci_disable_link_state(priv->pdev, + PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1); + return 0; } #endif /* CONFIG_PM_SLEEP */ diff --git a/drivers/misc/genwqe/card_base.c b/drivers/misc/genwqe/card_base.c index 02628288cd0f..b03010810b89 100644 --- a/drivers/misc/genwqe/card_base.c +++ b/drivers/misc/genwqe/card_base.c @@ -19,7 +19,6 @@ #include <linux/types.h> #include <linux/pci.h> #include <linux/err.h> -#include <linux/aer.h> #include <linux/string.h> #include <linux/sched.h> #include <linux/wait.h> @@ -1099,7 +1098,6 @@ static int genwqe_pci_setup(struct genwqe_dev *cd) } pci_set_master(pci_dev); - pci_enable_pcie_error_reporting(pci_dev); /* EEH recovery requires PCIe fundamental reset */ pci_dev->needs_freset = 1; diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c index 2c3a991d6e88..2fde8d63c5fe 100644 --- a/drivers/misc/hpilo.c +++ b/drivers/misc/hpilo.c @@ -392,12 +392,6 @@ static inline int is_db_reset(int db_out) return db_out & (1 << DB_RESET); } -static inline int is_device_reset(struct ilo_hwinfo *hw) -{ - /* check for global reset condition */ - return is_db_reset(get_device_outbound(hw)); -} - static inline void clear_pending_db(struct ilo_hwinfo *hw, int clr) { iowrite32(clr, &hw->mmio_vaddr[DB_OUT]); diff --git a/drivers/misc/lis3lv02d/lis3lv02d.c b/drivers/misc/lis3lv02d/lis3lv02d.c index 3a7808b796b1..299d316f1bda 100644 --- a/drivers/misc/lis3lv02d/lis3lv02d.c +++ b/drivers/misc/lis3lv02d/lis3lv02d.c @@ -965,19 +965,19 @@ int lis3lv02d_init_dt(struct lis3lv02d *lis3) if (!pdata) return -ENOMEM; - if (of_get_property(np, "st,click-single-x", NULL)) + if (of_property_read_bool(np, "st,click-single-x")) pdata->click_flags |= LIS3_CLICK_SINGLE_X; - if (of_get_property(np, "st,click-double-x", NULL)) + if (of_property_read_bool(np, "st,click-double-x")) pdata->click_flags |= LIS3_CLICK_DOUBLE_X; - if (of_get_property(np, "st,click-single-y", NULL)) + if (of_property_read_bool(np, "st,click-single-y")) pdata->click_flags |= LIS3_CLICK_SINGLE_Y; - if (of_get_property(np, "st,click-double-y", NULL)) + if (of_property_read_bool(np, "st,click-double-y")) pdata->click_flags |= LIS3_CLICK_DOUBLE_Y; - if (of_get_property(np, "st,click-single-z", NULL)) + if (of_property_read_bool(np, "st,click-single-z")) pdata->click_flags |= LIS3_CLICK_SINGLE_Z; - if (of_get_property(np, "st,click-double-z", NULL)) + if (of_property_read_bool(np, "st,click-double-z")) pdata->click_flags |= LIS3_CLICK_DOUBLE_Z; if (!of_property_read_u32(np, "st,click-threshold-x", &val)) @@ -994,31 +994,31 @@ int lis3lv02d_init_dt(struct lis3lv02d *lis3) if (!of_property_read_u32(np, "st,click-window", &val)) pdata->click_window = val; - if (of_get_property(np, "st,irq1-disable", NULL)) + if (of_property_read_bool(np, "st,irq1-disable")) pdata->irq_cfg |= LIS3_IRQ1_DISABLE; - if (of_get_property(np, "st,irq1-ff-wu-1", NULL)) + if (of_property_read_bool(np, "st,irq1-ff-wu-1")) pdata->irq_cfg |= LIS3_IRQ1_FF_WU_1; - if (of_get_property(np, "st,irq1-ff-wu-2", NULL)) + if (of_property_read_bool(np, "st,irq1-ff-wu-2")) pdata->irq_cfg |= LIS3_IRQ1_FF_WU_2; - if (of_get_property(np, "st,irq1-data-ready", NULL)) + if (of_property_read_bool(np, "st,irq1-data-ready")) pdata->irq_cfg |= LIS3_IRQ1_DATA_READY; - if (of_get_property(np, "st,irq1-click", NULL)) + if (of_property_read_bool(np, "st,irq1-click")) pdata->irq_cfg |= LIS3_IRQ1_CLICK; - if (of_get_property(np, "st,irq2-disable", NULL)) + if (of_property_read_bool(np, "st,irq2-disable")) pdata->irq_cfg |= LIS3_IRQ2_DISABLE; - if (of_get_property(np, "st,irq2-ff-wu-1", NULL)) + if (of_property_read_bool(np, "st,irq2-ff-wu-1")) pdata->irq_cfg |= LIS3_IRQ2_FF_WU_1; - if (of_get_property(np, "st,irq2-ff-wu-2", NULL)) + if (of_property_read_bool(np, "st,irq2-ff-wu-2")) pdata->irq_cfg |= LIS3_IRQ2_FF_WU_2; - if (of_get_property(np, "st,irq2-data-ready", NULL)) + if (of_property_read_bool(np, "st,irq2-data-ready")) pdata->irq_cfg |= LIS3_IRQ2_DATA_READY; - if (of_get_property(np, "st,irq2-click", NULL)) + if (of_property_read_bool(np, "st,irq2-click")) pdata->irq_cfg |= LIS3_IRQ2_CLICK; - if (of_get_property(np, "st,irq-open-drain", NULL)) + if (of_property_read_bool(np, "st,irq-open-drain")) pdata->irq_cfg |= LIS3_IRQ_OPEN_DRAIN; - if (of_get_property(np, "st,irq-active-low", NULL)) + if (of_property_read_bool(np, "st,irq-active-low")) pdata->irq_cfg |= LIS3_IRQ_ACTIVE_LOW; if (!of_property_read_u32(np, "st,wu-duration-1", &val)) @@ -1026,32 +1026,32 @@ int lis3lv02d_init_dt(struct lis3lv02d *lis3) if (!of_property_read_u32(np, "st,wu-duration-2", &val)) pdata->duration2 = val; - if (of_get_property(np, "st,wakeup-x-lo", NULL)) + if (of_property_read_bool(np, "st,wakeup-x-lo")) pdata->wakeup_flags |= LIS3_WAKEUP_X_LO; - if (of_get_property(np, "st,wakeup-x-hi", NULL)) + if (of_property_read_bool(np, "st,wakeup-x-hi")) pdata->wakeup_flags |= LIS3_WAKEUP_X_HI; - if (of_get_property(np, "st,wakeup-y-lo", NULL)) + if (of_property_read_bool(np, "st,wakeup-y-lo")) pdata->wakeup_flags |= LIS3_WAKEUP_Y_LO; - if (of_get_property(np, "st,wakeup-y-hi", NULL)) + if (of_property_read_bool(np, "st,wakeup-y-hi")) pdata->wakeup_flags |= LIS3_WAKEUP_Y_HI; - if (of_get_property(np, "st,wakeup-z-lo", NULL)) + if (of_property_read_bool(np, "st,wakeup-z-lo")) pdata->wakeup_flags |= LIS3_WAKEUP_Z_LO; - if (of_get_property(np, "st,wakeup-z-hi", NULL)) + if (of_property_read_bool(np, "st,wakeup-z-hi")) pdata->wakeup_flags |= LIS3_WAKEUP_Z_HI; if (of_get_property(np, "st,wakeup-threshold", &val)) pdata->wakeup_thresh = val; - if (of_get_property(np, "st,wakeup2-x-lo", NULL)) + if (of_property_read_bool(np, "st,wakeup2-x-lo")) pdata->wakeup_flags2 |= LIS3_WAKEUP_X_LO; - if (of_get_property(np, "st,wakeup2-x-hi", NULL)) + if (of_property_read_bool(np, "st,wakeup2-x-hi")) pdata->wakeup_flags2 |= LIS3_WAKEUP_X_HI; - if (of_get_property(np, "st,wakeup2-y-lo", NULL)) + if (of_property_read_bool(np, "st,wakeup2-y-lo")) pdata->wakeup_flags2 |= LIS3_WAKEUP_Y_LO; - if (of_get_property(np, "st,wakeup2-y-hi", NULL)) + if (of_property_read_bool(np, "st,wakeup2-y-hi")) pdata->wakeup_flags2 |= LIS3_WAKEUP_Y_HI; - if (of_get_property(np, "st,wakeup2-z-lo", NULL)) + if (of_property_read_bool(np, "st,wakeup2-z-lo")) pdata->wakeup_flags2 |= LIS3_WAKEUP_Z_LO; - if (of_get_property(np, "st,wakeup2-z-hi", NULL)) + if (of_property_read_bool(np, "st,wakeup2-z-hi")) pdata->wakeup_flags2 |= LIS3_WAKEUP_Z_HI; if (of_get_property(np, "st,wakeup2-threshold", &val)) pdata->wakeup_thresh2 = val; @@ -1073,9 +1073,9 @@ int lis3lv02d_init_dt(struct lis3lv02d *lis3) } } - if (of_get_property(np, "st,hipass1-disable", NULL)) + if (of_property_read_bool(np, "st,hipass1-disable")) pdata->hipass_ctrl |= LIS3_HIPASS1_DISABLE; - if (of_get_property(np, "st,hipass2-disable", NULL)) + if (of_property_read_bool(np, "st,hipass2-disable")) pdata->hipass_ctrl |= LIS3_HIPASS2_DISABLE; if (of_property_read_s32(np, "st,axis-x", &sval) == 0) @@ -1085,7 +1085,7 @@ int lis3lv02d_init_dt(struct lis3lv02d *lis3) if (of_property_read_s32(np, "st,axis-z", &sval) == 0) pdata->axis_z = sval; - if (of_get_property(np, "st,default-rate", NULL)) + if (of_property_read_u32(np, "st,default-rate", &val) == 0) pdata->default_rate = val; if (of_property_read_s32(np, "st,min-limit-x", &sval) == 0) diff --git a/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c index 3389803cb281..e616e3ec2b42 100644 --- a/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c +++ b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c @@ -175,9 +175,13 @@ static void pci1xxxx_gpio_irq_set_mask(struct irq_data *data, bool set) unsigned int gpio = irqd_to_hwirq(data); unsigned long flags; + if (!set) + gpiochip_enable_irq(chip, gpio); spin_lock_irqsave(&priv->lock, flags); pci1xxx_assign_bit(priv->reg_base, INTR_MASK_OFFSET(gpio), (gpio % 32), set); spin_unlock_irqrestore(&priv->lock, flags); + if (set) + gpiochip_disable_irq(chip, gpio); } static void pci1xxxx_gpio_irq_mask(struct irq_data *data) @@ -283,12 +287,14 @@ static irqreturn_t pci1xxxx_gpio_irq_handler(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irq_chip pci1xxxx_gpio_irqchip = { +static const struct irq_chip pci1xxxx_gpio_irqchip = { .name = "pci1xxxx_gpio", .irq_ack = pci1xxxx_gpio_irq_ack, .irq_mask = pci1xxxx_gpio_irq_mask, .irq_unmask = pci1xxxx_gpio_irq_unmask, .irq_set_type = pci1xxxx_gpio_set_type, + .flags = IRQCHIP_IMMUTABLE, + GPIOCHIP_IRQ_RESOURCE_HELPERS, }; static int pci1xxxx_gpio_suspend(struct device *dev) @@ -351,7 +357,7 @@ static int pci1xxxx_gpio_setup(struct pci1xxxx_gpio *priv, int irq) return retval; girq = &priv->gpio.irq; - girq->chip = &pci1xxxx_gpio_irqchip; + gpio_irq_chip_set_chip(girq, &pci1xxxx_gpio_irqchip); girq->parent_handler = NULL; girq->num_parents = 0; girq->parents = NULL; diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c index 211536109308..31e3c74ca1f1 100644 --- a/drivers/misc/mei/bus-fixup.c +++ b/drivers/misc/mei/bus-fixup.c @@ -9,8 +9,8 @@ #include <linux/module.h> #include <linux/device.h> #include <linux/slab.h> -#include <linux/uuid.h> +#include <linux/mei.h> #include <linux/mei_cl_bus.h> #include "mei_dev.h" diff --git a/drivers/misc/mei/hdcp/mei_hdcp.c b/drivers/misc/mei/hdcp/mei_hdcp.c index 7728fe685476..85cbfc3413ee 100644 --- a/drivers/misc/mei/hdcp/mei_hdcp.c +++ b/drivers/misc/mei/hdcp/mei_hdcp.c @@ -18,7 +18,7 @@ #include <linux/module.h> #include <linux/slab.h> -#include <linux/uuid.h> +#include <linux/mei.h> #include <linux/mei_cl_bus.h> #include <linux/component.h> #include <drm/drm_connector.h> diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h index 319418ddf4fb..e910302fcd1f 100644 --- a/drivers/misc/mei/hw.h +++ b/drivers/misc/mei/hw.h @@ -7,7 +7,7 @@ #ifndef _MEI_HW_TYPES_H_ #define _MEI_HW_TYPES_H_ -#include <linux/uuid.h> +#include <linux/mei.h> /* * Timeouts in Seconds diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c index 76c771a424f7..51876da3fd65 100644 --- a/drivers/misc/mei/main.c +++ b/drivers/misc/mei/main.c @@ -18,7 +18,6 @@ #include <linux/ioctl.h> #include <linux/cdev.h> #include <linux/sched/signal.h> -#include <linux/uuid.h> #include <linux/compat.h> #include <linux/jiffies.h> #include <linux/interrupt.h> diff --git a/drivers/misc/mei/pxp/mei_pxp.c b/drivers/misc/mei/pxp/mei_pxp.c index 7ee1fa7b1cb3..3bf560bbdee0 100644 --- a/drivers/misc/mei/pxp/mei_pxp.c +++ b/drivers/misc/mei/pxp/mei_pxp.c @@ -13,7 +13,7 @@ #include <linux/module.h> #include <linux/slab.h> -#include <linux/uuid.h> +#include <linux/mei.h> #include <linux/mei_cl_bus.h> #include <linux/component.h> #include <drm/drm_connector.h> diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index b2c3c22fc13c..6da509d692bb 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -93,7 +93,7 @@ int xpc_disengage_timelimit = XPC_DISENGAGE_DEFAULT_TIMELIMIT; static int xpc_disengage_min_timelimit; /* = 0 */ static int xpc_disengage_max_timelimit = 120; -static struct ctl_table xpc_sys_xpc_hb_dir[] = { +static struct ctl_table xpc_sys_xpc_hb[] = { { .procname = "hb_interval", .data = &xpc_hb_interval, @@ -112,11 +112,7 @@ static struct ctl_table xpc_sys_xpc_hb_dir[] = { .extra2 = &xpc_hb_check_max_interval}, {} }; -static struct ctl_table xpc_sys_xpc_dir[] = { - { - .procname = "hb", - .mode = 0555, - .child = xpc_sys_xpc_hb_dir}, +static struct ctl_table xpc_sys_xpc[] = { { .procname = "disengage_timelimit", .data = &xpc_disengage_timelimit, @@ -127,14 +123,9 @@ static struct ctl_table xpc_sys_xpc_dir[] = { .extra2 = &xpc_disengage_max_timelimit}, {} }; -static struct ctl_table xpc_sys_dir[] = { - { - .procname = "xpc", - .mode = 0555, - .child = xpc_sys_xpc_dir}, - {} -}; + static struct ctl_table_header *xpc_sysctl; +static struct ctl_table_header *xpc_sysctl_hb; /* non-zero if any remote partition disengage was timed out */ int xpc_disengage_timedout; @@ -1041,6 +1032,8 @@ xpc_do_exit(enum xp_retval reason) if (xpc_sysctl) unregister_sysctl_table(xpc_sysctl); + if (xpc_sysctl_hb) + unregister_sysctl_table(xpc_sysctl_hb); xpc_teardown_partitions(); @@ -1243,7 +1236,8 @@ xpc_init(void) goto out_1; } - xpc_sysctl = register_sysctl_table(xpc_sys_dir); + xpc_sysctl = register_sysctl("xpc", xpc_sys_xpc); + xpc_sysctl_hb = register_sysctl("xpc/hb", xpc_sys_xpc_hb); /* * Fill the partition reserved page with the information needed by @@ -1308,6 +1302,8 @@ out_3: (void)unregister_die_notifier(&xpc_die_notifier); (void)unregister_reboot_notifier(&xpc_reboot_notifier); out_2: + if (xpc_sysctl_hb) + unregister_sysctl_table(xpc_sysctl_hb); if (xpc_sysctl) unregister_sysctl_table(xpc_sysctl); diff --git a/drivers/misc/smpro-errmon.c b/drivers/misc/smpro-errmon.c index d1431d419aa4..a1f0b2c77fac 100644 --- a/drivers/misc/smpro-errmon.c +++ b/drivers/misc/smpro-errmon.c @@ -47,6 +47,12 @@ #define WARN_PMPRO_INFO_LO 0xAC #define WARN_PMPRO_INFO_HI 0xAD +/* Boot Stage Register */ +#define BOOTSTAGE 0xB0 +#define DIMM_SYNDROME_SEL 0xB4 +#define DIMM_SYNDROME_ERR 0xB5 +#define DIMM_SYNDROME_STAGE 4 + /* PCIE Error Registers */ #define PCIE_CE_ERR_CNT 0xC0 #define PCIE_CE_ERR_LEN 0xC1 @@ -67,6 +73,7 @@ #define VRD_WARN_FAULT_EVENT_DATA 0x78 #define VRD_HOT_EVENT_DATA 0x79 #define DIMM_HOT_EVENT_DATA 0x7A +#define DIMM_2X_REFRESH_EVENT_DATA 0x96 #define MAX_READ_BLOCK_LENGTH 48 @@ -190,6 +197,7 @@ enum EVENT_TYPES { VRD_WARN_FAULT_EVENT, VRD_HOT_EVENT, DIMM_HOT_EVENT, + DIMM_2X_REFRESH_EVENT, NUM_EVENTS_TYPE, }; @@ -198,6 +206,7 @@ static u8 smpro_event_table[NUM_EVENTS_TYPE] = { VRD_WARN_FAULT_EVENT_DATA, VRD_HOT_EVENT_DATA, DIMM_HOT_EVENT_DATA, + DIMM_2X_REFRESH_EVENT_DATA, }; static ssize_t smpro_event_data_read(struct device *dev, @@ -463,6 +472,62 @@ static DEVICE_ATTR_RO(warn_pmpro); EVENT_RO(vrd_warn_fault, VRD_WARN_FAULT_EVENT); EVENT_RO(vrd_hot, VRD_HOT_EVENT); EVENT_RO(dimm_hot, DIMM_HOT_EVENT); +EVENT_RO(dimm_2x_refresh, DIMM_2X_REFRESH_EVENT); + +static ssize_t smpro_dimm_syndrome_read(struct device *dev, struct device_attribute *da, + char *buf, unsigned int slot) +{ + struct smpro_errmon *errmon = dev_get_drvdata(dev); + unsigned int data; + int ret; + + ret = regmap_read(errmon->regmap, BOOTSTAGE, &data); + if (ret) + return ret; + + /* check for valid stage */ + data = (data >> 8) & 0xff; + if (data != DIMM_SYNDROME_STAGE) + return ret; + + /* Write the slot ID to retrieve Error Syndrome */ + ret = regmap_write(errmon->regmap, DIMM_SYNDROME_SEL, slot); + if (ret) + return ret; + + /* Read the Syndrome error */ + ret = regmap_read(errmon->regmap, DIMM_SYNDROME_ERR, &data); + if (ret || !data) + return ret; + + return sysfs_emit(buf, "%04x\n", data); +} + +#define EVENT_DIMM_SYNDROME(_slot) \ + static ssize_t event_dimm##_slot##_syndrome_show(struct device *dev, \ + struct device_attribute *da, \ + char *buf) \ + { \ + return smpro_dimm_syndrome_read(dev, da, buf, _slot); \ + } \ + static DEVICE_ATTR_RO(event_dimm##_slot##_syndrome) + +EVENT_DIMM_SYNDROME(0); +EVENT_DIMM_SYNDROME(1); +EVENT_DIMM_SYNDROME(2); +EVENT_DIMM_SYNDROME(3); +EVENT_DIMM_SYNDROME(4); +EVENT_DIMM_SYNDROME(5); +EVENT_DIMM_SYNDROME(6); +EVENT_DIMM_SYNDROME(7); +EVENT_DIMM_SYNDROME(8); +EVENT_DIMM_SYNDROME(9); +EVENT_DIMM_SYNDROME(10); +EVENT_DIMM_SYNDROME(11); +EVENT_DIMM_SYNDROME(12); +EVENT_DIMM_SYNDROME(13); +EVENT_DIMM_SYNDROME(14); +EVENT_DIMM_SYNDROME(15); static struct attribute *smpro_errmon_attrs[] = { &dev_attr_overflow_core_ce.attr, @@ -488,6 +553,23 @@ static struct attribute *smpro_errmon_attrs[] = { &dev_attr_event_vrd_warn_fault.attr, &dev_attr_event_vrd_hot.attr, &dev_attr_event_dimm_hot.attr, + &dev_attr_event_dimm_2x_refresh.attr, + &dev_attr_event_dimm0_syndrome.attr, + &dev_attr_event_dimm1_syndrome.attr, + &dev_attr_event_dimm2_syndrome.attr, + &dev_attr_event_dimm3_syndrome.attr, + &dev_attr_event_dimm4_syndrome.attr, + &dev_attr_event_dimm5_syndrome.attr, + &dev_attr_event_dimm6_syndrome.attr, + &dev_attr_event_dimm7_syndrome.attr, + &dev_attr_event_dimm8_syndrome.attr, + &dev_attr_event_dimm9_syndrome.attr, + &dev_attr_event_dimm10_syndrome.attr, + &dev_attr_event_dimm11_syndrome.attr, + &dev_attr_event_dimm12_syndrome.attr, + &dev_attr_event_dimm13_syndrome.attr, + &dev_attr_event_dimm14_syndrome.attr, + &dev_attr_event_dimm15_syndrome.attr, NULL }; diff --git a/drivers/misc/sram.c b/drivers/misc/sram.c index f0e7f02605eb..99413310956b 100644 --- a/drivers/misc/sram.c +++ b/drivers/misc/sram.c @@ -218,14 +218,9 @@ static int sram_reserve_regions(struct sram_dev *sram, struct resource *res) block->res = child_res; list_add_tail(&block->list, &reserve_list); - if (of_find_property(child, "export", NULL)) - block->export = true; - - if (of_find_property(child, "pool", NULL)) - block->pool = true; - - if (of_find_property(child, "protect-exec", NULL)) - block->protect_exec = true; + block->export = of_property_read_bool(child, "export"); + block->pool = of_property_read_bool(child, "pool"); + block->protect_exec = of_property_read_bool(child, "protect-exec"); if ((block->export || block->pool || block->protect_exec) && block->size) { @@ -381,6 +376,7 @@ static int sram_probe(struct platform_device *pdev) struct sram_dev *sram; int ret; struct resource *res; + struct clk *clk; config = of_device_get_match_data(&pdev->dev); @@ -409,16 +405,14 @@ static int sram_probe(struct platform_device *pdev) return PTR_ERR(sram->pool); } - sram->clk = devm_clk_get(sram->dev, NULL); - if (IS_ERR(sram->clk)) - sram->clk = NULL; - else - clk_prepare_enable(sram->clk); + clk = devm_clk_get_optional_enabled(sram->dev, NULL); + if (IS_ERR(clk)) + return PTR_ERR(clk); ret = sram_reserve_regions(sram, platform_get_resource(pdev, IORESOURCE_MEM, 0)); if (ret) - goto err_disable_clk; + return ret; platform_set_drvdata(pdev, sram); @@ -436,9 +430,6 @@ static int sram_probe(struct platform_device *pdev) err_free_partitions: sram_free_partitions(sram); -err_disable_clk: - if (sram->clk) - clk_disable_unprepare(sram->clk); return ret; } @@ -452,9 +443,6 @@ static int sram_remove(struct platform_device *pdev) if (sram->pool && gen_pool_avail(sram->pool) < gen_pool_size(sram->pool)) dev_err(sram->dev, "removed while SRAM allocated\n"); - if (sram->clk) - clk_disable_unprepare(sram->clk); - return 0; } diff --git a/drivers/misc/sram.h b/drivers/misc/sram.h index d2058d8c8f1d..397205b8bf6f 100644 --- a/drivers/misc/sram.h +++ b/drivers/misc/sram.h @@ -27,7 +27,6 @@ struct sram_dev { bool no_memory_wc; struct gen_pool *pool; - struct clk *clk; struct sram_partition *partition; u32 partitions; diff --git a/drivers/misc/vmw_vmci/vmci_host.c b/drivers/misc/vmw_vmci/vmci_host.c index 857b9851402a..abe79f6fd2a7 100644 --- a/drivers/misc/vmw_vmci/vmci_host.c +++ b/drivers/misc/vmw_vmci/vmci_host.c @@ -165,10 +165,16 @@ static int vmci_host_close(struct inode *inode, struct file *filp) static __poll_t vmci_host_poll(struct file *filp, poll_table *wait) { struct vmci_host_dev *vmci_host_dev = filp->private_data; - struct vmci_ctx *context = vmci_host_dev->context; + struct vmci_ctx *context; __poll_t mask = 0; if (vmci_host_dev->ct_type == VMCIOBJ_CONTEXT) { + /* + * Read context only if ct_type == VMCIOBJ_CONTEXT to make + * sure that context is initialized + */ + context = vmci_host_dev->context; + /* Check for VMCI calls to this VM context. */ if (wait) poll_wait(filp, &context->host_context.wait_queue, diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig index 6dec38805041..b291b27048c7 100644 --- a/drivers/nvmem/Kconfig +++ b/drivers/nvmem/Kconfig @@ -21,6 +21,10 @@ config NVMEM_SYSFS This interface is mostly used by userspace applications to read/write directly into nvmem. +# Layouts + +source "drivers/nvmem/layouts/Kconfig" + # Devices config NVMEM_APPLE_EFUSES @@ -336,6 +340,7 @@ config NVMEM_U_BOOT_ENV tristate "U-Boot environment variables support" depends on OF && MTD select CRC32 + select GENERIC_NET_UTILS help U-Boot stores its setup as environment variables. This driver adds support for verifying & exporting such data. It also exposes variables @@ -368,7 +373,7 @@ config NVMEM_VF610_OCOTP be called nvmem-vf610-ocotp. config NVMEM_ZYNQMP - bool "Xilinx ZYNQMP SoC nvmem firmware support" + tristate "Xilinx ZYNQMP SoC nvmem firmware support" depends on ARCH_ZYNQMP help This is a driver to access hardware related data like diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile index 6a1efffa88f0..f82431ec8aef 100644 --- a/drivers/nvmem/Makefile +++ b/drivers/nvmem/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_NVMEM) += nvmem_core.o nvmem_core-y := core.o +obj-y += layouts/ # Devices obj-$(CONFIG_NVMEM_APPLE_EFUSES) += nvmem-apple-efuses.o diff --git a/drivers/nvmem/bcm-ocotp.c b/drivers/nvmem/bcm-ocotp.c index a128c7f5e351..0c1fa0c4feb2 100644 --- a/drivers/nvmem/bcm-ocotp.c +++ b/drivers/nvmem/bcm-ocotp.c @@ -244,7 +244,6 @@ MODULE_DEVICE_TABLE(acpi, bcm_otpc_acpi_ids); static int bcm_otpc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct resource *res; struct otpc_priv *priv; struct nvmem_device *nvmem; int err; @@ -259,8 +258,7 @@ static int bcm_otpc_probe(struct platform_device *pdev) return -ENODEV; /* Get OTP base address register. */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - priv->base = devm_ioremap_resource(dev, res); + priv->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(priv->base)) { dev_err(dev, "unable to map I/O memory\n"); return PTR_ERR(priv->base); diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c index 22024b830788..a62973d010ff 100644 --- a/drivers/nvmem/core.c +++ b/drivers/nvmem/core.c @@ -17,6 +17,7 @@ #include <linux/nvmem-provider.h> #include <linux/gpio/consumer.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/slab.h> struct nvmem_device { @@ -38,8 +39,8 @@ struct nvmem_device { unsigned int nkeepout; nvmem_reg_read_t reg_read; nvmem_reg_write_t reg_write; - nvmem_cell_post_process_t cell_post_process; struct gpio_desc *wp_gpio; + struct nvmem_layout *layout; void *priv; }; @@ -49,9 +50,12 @@ struct nvmem_device { struct nvmem_cell_entry { const char *name; int offset; + size_t raw_len; int bytes; int bit_offset; int nbits; + nvmem_cell_post_process_t read_post_process; + void *priv; struct device_node *np; struct nvmem_device *nvmem; struct list_head node; @@ -74,6 +78,9 @@ static LIST_HEAD(nvmem_lookup_list); static BLOCKING_NOTIFIER_HEAD(nvmem_notifier); +static DEFINE_SPINLOCK(nvmem_layout_lock); +static LIST_HEAD(nvmem_layouts); + static int __nvmem_reg_read(struct nvmem_device *nvmem, unsigned int offset, void *val, size_t bytes) { @@ -463,8 +470,11 @@ static int nvmem_cell_info_to_nvmem_cell_entry_nodup(struct nvmem_device *nvmem, { cell->nvmem = nvmem; cell->offset = info->offset; + cell->raw_len = info->raw_len ?: info->bytes; cell->bytes = info->bytes; cell->name = info->name; + cell->read_post_process = info->read_post_process; + cell->priv = info->priv; cell->bit_offset = info->bit_offset; cell->nbits = info->nbits; @@ -688,6 +698,7 @@ static int nvmem_validate_keepouts(struct nvmem_device *nvmem) static int nvmem_add_cells_from_of(struct nvmem_device *nvmem) { + struct nvmem_layout *layout = nvmem->layout; struct device *dev = &nvmem->dev; struct device_node *child; const __be32 *addr; @@ -717,6 +728,9 @@ static int nvmem_add_cells_from_of(struct nvmem_device *nvmem) info.np = of_node_get(child); + if (layout && layout->fixup_cell_info) + layout->fixup_cell_info(nvmem, layout, &info); + ret = nvmem_add_one_cell(nvmem, &info); kfree(info.name); if (ret) { @@ -728,6 +742,108 @@ static int nvmem_add_cells_from_of(struct nvmem_device *nvmem) return 0; } +int __nvmem_layout_register(struct nvmem_layout *layout, struct module *owner) +{ + layout->owner = owner; + + spin_lock(&nvmem_layout_lock); + list_add(&layout->node, &nvmem_layouts); + spin_unlock(&nvmem_layout_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(__nvmem_layout_register); + +void nvmem_layout_unregister(struct nvmem_layout *layout) +{ + spin_lock(&nvmem_layout_lock); + list_del(&layout->node); + spin_unlock(&nvmem_layout_lock); +} +EXPORT_SYMBOL_GPL(nvmem_layout_unregister); + +static struct nvmem_layout *nvmem_layout_get(struct nvmem_device *nvmem) +{ + struct device_node *layout_np, *np = nvmem->dev.of_node; + struct nvmem_layout *l, *layout = ERR_PTR(-EPROBE_DEFER); + + layout_np = of_get_child_by_name(np, "nvmem-layout"); + if (!layout_np) + return NULL; + + /* + * In case the nvmem device was built-in while the layout was built as a + * module, we shall manually request the layout driver loading otherwise + * we'll never have any match. + */ + of_request_module(layout_np); + + spin_lock(&nvmem_layout_lock); + + list_for_each_entry(l, &nvmem_layouts, node) { + if (of_match_node(l->of_match_table, layout_np)) { + if (try_module_get(l->owner)) + layout = l; + + break; + } + } + + spin_unlock(&nvmem_layout_lock); + of_node_put(layout_np); + + return layout; +} + +static void nvmem_layout_put(struct nvmem_layout *layout) +{ + if (layout) + module_put(layout->owner); +} + +static int nvmem_add_cells_from_layout(struct nvmem_device *nvmem) +{ + struct nvmem_layout *layout = nvmem->layout; + int ret; + + if (layout && layout->add_cells) { + ret = layout->add_cells(&nvmem->dev, nvmem, layout); + if (ret) + return ret; + } + + return 0; +} + +#if IS_ENABLED(CONFIG_OF) +/** + * of_nvmem_layout_get_container() - Get OF node to layout container. + * + * @nvmem: nvmem device. + * + * Return: a node pointer with refcount incremented or NULL if no + * container exists. Use of_node_put() on it when done. + */ +struct device_node *of_nvmem_layout_get_container(struct nvmem_device *nvmem) +{ + return of_get_child_by_name(nvmem->dev.of_node, "nvmem-layout"); +} +EXPORT_SYMBOL_GPL(of_nvmem_layout_get_container); +#endif + +const void *nvmem_layout_get_match_data(struct nvmem_device *nvmem, + struct nvmem_layout *layout) +{ + struct device_node __maybe_unused *layout_np; + const struct of_device_id *match; + + layout_np = of_nvmem_layout_get_container(nvmem); + match = of_match_node(layout->of_match_table, layout_np); + + return match ? match->data : NULL; +} +EXPORT_SYMBOL_GPL(nvmem_layout_get_match_data); + /** * nvmem_register() - Register a nvmem device for given nvmem_config. * Also creates a binary entry in /sys/bus/nvmem/devices/dev-name/nvmem @@ -790,7 +906,6 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config) nvmem->type = config->type; nvmem->reg_read = config->reg_read; nvmem->reg_write = config->reg_write; - nvmem->cell_post_process = config->cell_post_process; nvmem->keepout = config->keepout; nvmem->nkeepout = config->nkeepout; if (config->of_node) @@ -834,6 +949,19 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config) goto err_put_device; } + /* + * If the driver supplied a layout by config->layout, the module + * pointer will be NULL and nvmem_layout_put() will be a noop. + */ + nvmem->layout = config->layout ?: nvmem_layout_get(nvmem); + if (IS_ERR(nvmem->layout)) { + rval = PTR_ERR(nvmem->layout); + nvmem->layout = NULL; + + if (rval == -EPROBE_DEFER) + goto err_teardown_compat; + } + if (config->cells) { rval = nvmem_add_cells(nvmem, config->cells, config->ncells); if (rval) @@ -854,12 +982,18 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config) if (rval) goto err_remove_cells; + rval = nvmem_add_cells_from_layout(nvmem); + if (rval) + goto err_remove_cells; + blocking_notifier_call_chain(&nvmem_notifier, NVMEM_ADD, nvmem); return nvmem; err_remove_cells: nvmem_device_remove_all_cells(nvmem); + nvmem_layout_put(nvmem->layout); +err_teardown_compat: if (config->compat) nvmem_sysfs_remove_compat(nvmem, config); err_put_device: @@ -881,6 +1015,7 @@ static void nvmem_device_release(struct kref *kref) device_remove_bin_file(nvmem->base_dev, &nvmem->eeprom); nvmem_device_remove_all_cells(nvmem); + nvmem_layout_put(nvmem->layout); device_unregister(&nvmem->dev); } @@ -1246,6 +1381,15 @@ struct nvmem_cell *of_nvmem_cell_get(struct device_node *np, const char *id) return ERR_PTR(-EINVAL); } + /* nvmem layouts produce cells within the nvmem-layout container */ + if (of_node_name_eq(nvmem_np, "nvmem-layout")) { + nvmem_np = of_get_next_parent(nvmem_np); + if (!nvmem_np) { + of_node_put(cell_np); + return ERR_PTR(-EINVAL); + } + } + nvmem = __nvmem_device_get(nvmem_np, device_match_of_node); of_node_put(nvmem_np); if (IS_ERR(nvmem)) { @@ -1418,7 +1562,7 @@ static int __nvmem_cell_read(struct nvmem_device *nvmem, { int rc; - rc = nvmem_reg_read(nvmem, cell->offset, buf, cell->bytes); + rc = nvmem_reg_read(nvmem, cell->offset, buf, cell->raw_len); if (rc) return rc; @@ -1427,9 +1571,9 @@ static int __nvmem_cell_read(struct nvmem_device *nvmem, if (cell->bit_offset || cell->nbits) nvmem_shift_read_buffer_in_place(cell, buf); - if (nvmem->cell_post_process) { - rc = nvmem->cell_post_process(nvmem->priv, id, index, - cell->offset, buf, cell->bytes); + if (cell->read_post_process) { + rc = cell->read_post_process(cell->priv, id, index, + cell->offset, buf, cell->raw_len); if (rc) return rc; } @@ -1452,14 +1596,15 @@ static int __nvmem_cell_read(struct nvmem_device *nvmem, */ void *nvmem_cell_read(struct nvmem_cell *cell, size_t *len) { - struct nvmem_device *nvmem = cell->entry->nvmem; + struct nvmem_cell_entry *entry = cell->entry; + struct nvmem_device *nvmem = entry->nvmem; u8 *buf; int rc; if (!nvmem) return ERR_PTR(-EINVAL); - buf = kzalloc(cell->entry->bytes, GFP_KERNEL); + buf = kzalloc(max_t(size_t, entry->raw_len, entry->bytes), GFP_KERNEL); if (!buf) return ERR_PTR(-ENOMEM); @@ -1535,6 +1680,14 @@ static int __nvmem_cell_entry_write(struct nvmem_cell_entry *cell, void *buf, si (cell->bit_offset == 0 && len != cell->bytes)) return -EINVAL; + /* + * Any cells which have a read_post_process hook are read-only because + * we cannot reverse the operation and it might affect other cells, + * too. + */ + if (cell->read_post_process) + return -EINVAL; + if (cell->bit_offset || cell->nbits) { buf = nvmem_cell_prepare_write_buffer(cell, buf, len); if (IS_ERR(buf)) diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c index e9b52ecb3f72..ac0edb6398f1 100644 --- a/drivers/nvmem/imx-ocotp.c +++ b/drivers/nvmem/imx-ocotp.c @@ -225,18 +225,13 @@ read_end: static int imx_ocotp_cell_pp(void *context, const char *id, int index, unsigned int offset, void *data, size_t bytes) { - struct ocotp_priv *priv = context; + u8 *buf = data; + int i; /* Deal with some post processing of nvmem cell data */ - if (id && !strcmp(id, "mac-address")) { - if (priv->params->reverse_mac_address) { - u8 *buf = data; - int i; - - for (i = 0; i < bytes/2; i++) - swap(buf[i], buf[bytes - i - 1]); - } - } + if (id && !strcmp(id, "mac-address")) + for (i = 0; i < bytes / 2; i++) + swap(buf[i], buf[bytes - i - 1]); return 0; } @@ -488,7 +483,6 @@ static struct nvmem_config imx_ocotp_nvmem_config = { .stride = 1, .reg_read = imx_ocotp_read, .reg_write = imx_ocotp_write, - .cell_post_process = imx_ocotp_cell_pp, }; static const struct ocotp_params imx6q_params = { @@ -595,6 +589,17 @@ static const struct of_device_id imx_ocotp_dt_ids[] = { }; MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids); +static void imx_ocotp_fixup_cell_info(struct nvmem_device *nvmem, + struct nvmem_layout *layout, + struct nvmem_cell_info *cell) +{ + cell->read_post_process = imx_ocotp_cell_pp; +} + +struct nvmem_layout imx_ocotp_layout = { + .fixup_cell_info = imx_ocotp_fixup_cell_info, +}; + static int imx_ocotp_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -619,6 +624,9 @@ static int imx_ocotp_probe(struct platform_device *pdev) imx_ocotp_nvmem_config.size = 4 * priv->params->nregs; imx_ocotp_nvmem_config.dev = dev; imx_ocotp_nvmem_config.priv = priv; + if (priv->params->reverse_mac_address) + imx_ocotp_nvmem_config.layout = &imx_ocotp_layout; + priv->config = &imx_ocotp_nvmem_config; clk_prepare_enable(priv->clk); diff --git a/drivers/nvmem/layouts/Kconfig b/drivers/nvmem/layouts/Kconfig new file mode 100644 index 000000000000..7ff1ee1c1f05 --- /dev/null +++ b/drivers/nvmem/layouts/Kconfig @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0 + +menu "Layout Types" + +config NVMEM_LAYOUT_SL28_VPD + tristate "Kontron sl28 VPD layout support" + select CRC8 + help + Say Y here if you want to support the VPD layout of the Kontron + SMARC-sAL28 boards. + + If unsure, say N. + +config NVMEM_LAYOUT_ONIE_TLV + tristate "ONIE tlv support" + select CRC32 + help + Say Y here if you want to support the Open Compute Project ONIE + Type-Length-Value standard table. + + If unsure, say N. + +endmenu diff --git a/drivers/nvmem/layouts/Makefile b/drivers/nvmem/layouts/Makefile new file mode 100644 index 000000000000..2974bd7d33ed --- /dev/null +++ b/drivers/nvmem/layouts/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for nvmem layouts. +# + +obj-$(CONFIG_NVMEM_LAYOUT_SL28_VPD) += sl28vpd.o +obj-$(CONFIG_NVMEM_LAYOUT_ONIE_TLV) += onie-tlv.o diff --git a/drivers/nvmem/layouts/onie-tlv.c b/drivers/nvmem/layouts/onie-tlv.c new file mode 100644 index 000000000000..59fc87ccfcff --- /dev/null +++ b/drivers/nvmem/layouts/onie-tlv.c @@ -0,0 +1,244 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ONIE tlv NVMEM cells provider + * + * Copyright (C) 2022 Open Compute Group ONIE + * Author: Miquel Raynal <miquel.raynal@bootlin.com> + * Based on the nvmem driver written by: Vadym Kochan <vadym.kochan@plvision.eu> + * Inspired by the first layout written by: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + */ + +#include <linux/crc32.h> +#include <linux/etherdevice.h> +#include <linux/nvmem-consumer.h> +#include <linux/nvmem-provider.h> +#include <linux/of.h> + +#define ONIE_TLV_MAX_LEN 2048 +#define ONIE_TLV_CRC_FIELD_SZ 6 +#define ONIE_TLV_CRC_SZ 4 +#define ONIE_TLV_HDR_ID "TlvInfo" + +struct onie_tlv_hdr { + u8 id[8]; + u8 version; + __be16 data_len; +} __packed; + +struct onie_tlv { + u8 type; + u8 len; +} __packed; + +static const char *onie_tlv_cell_name(u8 type) +{ + switch (type) { + case 0x21: + return "product-name"; + case 0x22: + return "part-number"; + case 0x23: + return "serial-number"; + case 0x24: + return "mac-address"; + case 0x25: + return "manufacture-date"; + case 0x26: + return "device-version"; + case 0x27: + return "label-revision"; + case 0x28: + return "platform-name"; + case 0x29: + return "onie-version"; + case 0x2A: + return "num-macs"; + case 0x2B: + return "manufacturer"; + case 0x2C: + return "country-code"; + case 0x2D: + return "vendor"; + case 0x2E: + return "diag-version"; + case 0x2F: + return "service-tag"; + case 0xFD: + return "vendor-extension"; + case 0xFE: + return "crc32"; + default: + break; + } + + return NULL; +} + +static int onie_tlv_mac_read_cb(void *priv, const char *id, int index, + unsigned int offset, void *buf, + size_t bytes) +{ + eth_addr_add(buf, index); + + return 0; +} + +static nvmem_cell_post_process_t onie_tlv_read_cb(u8 type, u8 *buf) +{ + switch (type) { + case 0x24: + return &onie_tlv_mac_read_cb; + default: + break; + } + + return NULL; +} + +static int onie_tlv_add_cells(struct device *dev, struct nvmem_device *nvmem, + size_t data_len, u8 *data) +{ + struct nvmem_cell_info cell = {}; + struct device_node *layout; + struct onie_tlv tlv; + unsigned int hdr_len = sizeof(struct onie_tlv_hdr); + unsigned int offset = 0; + int ret; + + layout = of_nvmem_layout_get_container(nvmem); + if (!layout) + return -ENOENT; + + while (offset < data_len) { + memcpy(&tlv, data + offset, sizeof(tlv)); + if (offset + tlv.len >= data_len) { + dev_err(dev, "Out of bounds field (0x%x bytes at 0x%x)\n", + tlv.len, hdr_len + offset); + break; + } + + cell.name = onie_tlv_cell_name(tlv.type); + if (!cell.name) + continue; + + cell.offset = hdr_len + offset + sizeof(tlv.type) + sizeof(tlv.len); + cell.bytes = tlv.len; + cell.np = of_get_child_by_name(layout, cell.name); + cell.read_post_process = onie_tlv_read_cb(tlv.type, data + offset + sizeof(tlv)); + + ret = nvmem_add_one_cell(nvmem, &cell); + if (ret) { + of_node_put(layout); + return ret; + } + + offset += sizeof(tlv) + tlv.len; + } + + of_node_put(layout); + + return 0; +} + +static bool onie_tlv_hdr_is_valid(struct device *dev, struct onie_tlv_hdr *hdr) +{ + if (memcmp(hdr->id, ONIE_TLV_HDR_ID, sizeof(hdr->id))) { + dev_err(dev, "Invalid header\n"); + return false; + } + + if (hdr->version != 0x1) { + dev_err(dev, "Invalid version number\n"); + return false; + } + + return true; +} + +static bool onie_tlv_crc_is_valid(struct device *dev, size_t table_len, u8 *table) +{ + struct onie_tlv crc_hdr; + u32 read_crc, calc_crc; + __be32 crc_be; + + memcpy(&crc_hdr, table + table_len - ONIE_TLV_CRC_FIELD_SZ, sizeof(crc_hdr)); + if (crc_hdr.type != 0xfe || crc_hdr.len != ONIE_TLV_CRC_SZ) { + dev_err(dev, "Invalid CRC field\n"); + return false; + } + + /* The table contains a JAMCRC, which is XOR'ed compared to the original + * CRC32 implementation as known in the Ethernet world. + */ + memcpy(&crc_be, table + table_len - ONIE_TLV_CRC_SZ, ONIE_TLV_CRC_SZ); + read_crc = be32_to_cpu(crc_be); + calc_crc = crc32(~0, table, table_len - ONIE_TLV_CRC_SZ) ^ 0xFFFFFFFF; + if (read_crc != calc_crc) { + dev_err(dev, "Invalid CRC read: 0x%08x, expected: 0x%08x\n", + read_crc, calc_crc); + return false; + } + + return true; +} + +static int onie_tlv_parse_table(struct device *dev, struct nvmem_device *nvmem, + struct nvmem_layout *layout) +{ + struct onie_tlv_hdr hdr; + size_t table_len, data_len, hdr_len; + u8 *table, *data; + int ret; + + ret = nvmem_device_read(nvmem, 0, sizeof(hdr), &hdr); + if (ret < 0) + return ret; + + if (!onie_tlv_hdr_is_valid(dev, &hdr)) { + dev_err(dev, "Invalid ONIE TLV header\n"); + return -EINVAL; + } + + hdr_len = sizeof(hdr.id) + sizeof(hdr.version) + sizeof(hdr.data_len); + data_len = be16_to_cpu(hdr.data_len); + table_len = hdr_len + data_len; + if (table_len > ONIE_TLV_MAX_LEN) { + dev_err(dev, "Invalid ONIE TLV data length\n"); + return -EINVAL; + } + + table = devm_kmalloc(dev, table_len, GFP_KERNEL); + if (!table) + return -ENOMEM; + + ret = nvmem_device_read(nvmem, 0, table_len, table); + if (ret != table_len) + return ret; + + if (!onie_tlv_crc_is_valid(dev, table_len, table)) + return -EINVAL; + + data = table + hdr_len; + ret = onie_tlv_add_cells(dev, nvmem, data_len, data); + if (ret) + return ret; + + return 0; +} + +static const struct of_device_id onie_tlv_of_match_table[] = { + { .compatible = "onie,tlv-layout", }, + {}, +}; +MODULE_DEVICE_TABLE(of, onie_tlv_of_match_table); + +static struct nvmem_layout onie_tlv_layout = { + .name = "ONIE tlv layout", + .of_match_table = onie_tlv_of_match_table, + .add_cells = onie_tlv_parse_table, +}; +module_nvmem_layout_driver(onie_tlv_layout); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com>"); +MODULE_DESCRIPTION("NVMEM layout driver for Onie TLV table parsing"); diff --git a/drivers/nvmem/layouts/sl28vpd.c b/drivers/nvmem/layouts/sl28vpd.c new file mode 100644 index 000000000000..05671371f631 --- /dev/null +++ b/drivers/nvmem/layouts/sl28vpd.c @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/crc8.h> +#include <linux/etherdevice.h> +#include <linux/nvmem-consumer.h> +#include <linux/nvmem-provider.h> +#include <linux/of.h> +#include <uapi/linux/if_ether.h> + +#define SL28VPD_MAGIC 'V' + +struct sl28vpd_header { + u8 magic; + u8 version; +} __packed; + +struct sl28vpd_v1 { + struct sl28vpd_header header; + char serial_number[15]; + u8 base_mac_address[ETH_ALEN]; + u8 crc8; +} __packed; + +static int sl28vpd_mac_address_pp(void *priv, const char *id, int index, + unsigned int offset, void *buf, + size_t bytes) +{ + if (bytes != ETH_ALEN) + return -EINVAL; + + if (index < 0) + return -EINVAL; + + if (!is_valid_ether_addr(buf)) + return -EINVAL; + + eth_addr_add(buf, index); + + return 0; +} + +static const struct nvmem_cell_info sl28vpd_v1_entries[] = { + { + .name = "serial-number", + .offset = offsetof(struct sl28vpd_v1, serial_number), + .bytes = sizeof_field(struct sl28vpd_v1, serial_number), + }, + { + .name = "base-mac-address", + .offset = offsetof(struct sl28vpd_v1, base_mac_address), + .bytes = sizeof_field(struct sl28vpd_v1, base_mac_address), + .read_post_process = sl28vpd_mac_address_pp, + }, +}; + +static int sl28vpd_v1_check_crc(struct device *dev, struct nvmem_device *nvmem) +{ + struct sl28vpd_v1 data_v1; + u8 table[CRC8_TABLE_SIZE]; + int ret; + u8 crc; + + crc8_populate_msb(table, 0x07); + + ret = nvmem_device_read(nvmem, 0, sizeof(data_v1), &data_v1); + if (ret < 0) + return ret; + else if (ret != sizeof(data_v1)) + return -EIO; + + crc = crc8(table, (void *)&data_v1, sizeof(data_v1) - 1, 0); + + if (crc != data_v1.crc8) { + dev_err(dev, + "Checksum is invalid (got %02x, expected %02x).\n", + crc, data_v1.crc8); + return -EINVAL; + } + + return 0; +} + +static int sl28vpd_add_cells(struct device *dev, struct nvmem_device *nvmem, + struct nvmem_layout *layout) +{ + const struct nvmem_cell_info *pinfo; + struct nvmem_cell_info info = {0}; + struct device_node *layout_np; + struct sl28vpd_header hdr; + int ret, i; + + /* check header */ + ret = nvmem_device_read(nvmem, 0, sizeof(hdr), &hdr); + if (ret < 0) + return ret; + else if (ret != sizeof(hdr)) + return -EIO; + + if (hdr.magic != SL28VPD_MAGIC) { + dev_err(dev, "Invalid magic value (%02x)\n", hdr.magic); + return -EINVAL; + } + + if (hdr.version != 1) { + dev_err(dev, "Version %d is unsupported.\n", hdr.version); + return -EINVAL; + } + + ret = sl28vpd_v1_check_crc(dev, nvmem); + if (ret) + return ret; + + layout_np = of_nvmem_layout_get_container(nvmem); + if (!layout_np) + return -ENOENT; + + for (i = 0; i < ARRAY_SIZE(sl28vpd_v1_entries); i++) { + pinfo = &sl28vpd_v1_entries[i]; + + info.name = pinfo->name; + info.offset = pinfo->offset; + info.bytes = pinfo->bytes; + info.read_post_process = pinfo->read_post_process; + info.np = of_get_child_by_name(layout_np, pinfo->name); + + ret = nvmem_add_one_cell(nvmem, &info); + if (ret) { + of_node_put(layout_np); + return ret; + } + } + + of_node_put(layout_np); + + return 0; +} + +static const struct of_device_id sl28vpd_of_match_table[] = { + { .compatible = "kontron,sl28-vpd" }, + {}, +}; +MODULE_DEVICE_TABLE(of, sl28vpd_of_match_table); + +static struct nvmem_layout sl28vpd_layout = { + .name = "sl28-vpd", + .of_match_table = sl28vpd_of_match_table, + .add_cells = sl28vpd_add_cells, +}; +module_nvmem_layout_driver(sl28vpd_layout); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Michael Walle <michael@walle.cc>"); +MODULE_DESCRIPTION("NVMEM layout driver for the VPD of Kontron sl28 boards"); diff --git a/drivers/nvmem/mtk-efuse.c b/drivers/nvmem/mtk-efuse.c index a08e0aedd21c..b36cd0dcc8c7 100644 --- a/drivers/nvmem/mtk-efuse.c +++ b/drivers/nvmem/mtk-efuse.c @@ -10,6 +10,11 @@ #include <linux/io.h> #include <linux/nvmem-provider.h> #include <linux/platform_device.h> +#include <linux/property.h> + +struct mtk_efuse_pdata { + bool uses_post_processing; +}; struct mtk_efuse_priv { void __iomem *base; @@ -29,6 +34,37 @@ static int mtk_reg_read(void *context, return 0; } +static int mtk_efuse_gpu_speedbin_pp(void *context, const char *id, int index, + unsigned int offset, void *data, size_t bytes) +{ + u8 *val = data; + + if (val[0] < 8) + val[0] = BIT(val[0]); + + return 0; +} + +static void mtk_efuse_fixup_cell_info(struct nvmem_device *nvmem, + struct nvmem_layout *layout, + struct nvmem_cell_info *cell) +{ + size_t sz = strlen(cell->name); + + /* + * On some SoCs, the GPU speedbin is not read as bitmask but as + * a number with range [0-7] (max 3 bits): post process to use + * it in OPP tables to describe supported-hw. + */ + if (cell->nbits <= 3 && + strncmp(cell->name, "gpu-speedbin", min(sz, strlen("gpu-speedbin"))) == 0) + cell->read_post_process = mtk_efuse_gpu_speedbin_pp; +} + +static struct nvmem_layout mtk_efuse_layout = { + .fixup_cell_info = mtk_efuse_fixup_cell_info, +}; + static int mtk_efuse_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -36,6 +72,7 @@ static int mtk_efuse_probe(struct platform_device *pdev) struct nvmem_device *nvmem; struct nvmem_config econfig = {}; struct mtk_efuse_priv *priv; + const struct mtk_efuse_pdata *pdata; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) @@ -45,20 +82,32 @@ static int mtk_efuse_probe(struct platform_device *pdev) if (IS_ERR(priv->base)) return PTR_ERR(priv->base); + pdata = device_get_match_data(dev); econfig.stride = 1; econfig.word_size = 1; econfig.reg_read = mtk_reg_read; econfig.size = resource_size(res); econfig.priv = priv; econfig.dev = dev; + if (pdata->uses_post_processing) + econfig.layout = &mtk_efuse_layout; nvmem = devm_nvmem_register(dev, &econfig); return PTR_ERR_OR_ZERO(nvmem); } +static const struct mtk_efuse_pdata mtk_mt8186_efuse_pdata = { + .uses_post_processing = true, +}; + +static const struct mtk_efuse_pdata mtk_efuse_pdata = { + .uses_post_processing = false, +}; + static const struct of_device_id mtk_efuse_of_match[] = { - { .compatible = "mediatek,mt8173-efuse",}, - { .compatible = "mediatek,efuse",}, + { .compatible = "mediatek,mt8173-efuse", .data = &mtk_efuse_pdata }, + { .compatible = "mediatek,mt8186-efuse", .data = &mtk_mt8186_efuse_pdata }, + { .compatible = "mediatek,efuse", .data = &mtk_efuse_pdata }, {/* sentinel */}, }; MODULE_DEVICE_TABLE(of, mtk_efuse_of_match); diff --git a/drivers/nvmem/nintendo-otp.c b/drivers/nvmem/nintendo-otp.c index 33961b17f9f1..355e7f1fc6d5 100644 --- a/drivers/nvmem/nintendo-otp.c +++ b/drivers/nvmem/nintendo-otp.c @@ -76,7 +76,6 @@ static int nintendo_otp_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; const struct of_device_id *of_id = of_match_device(nintendo_otp_of_table, dev); - struct resource *res; struct nvmem_device *nvmem; struct nintendo_otp_priv *priv; @@ -92,8 +91,7 @@ static int nintendo_otp_probe(struct platform_device *pdev) if (!priv) return -ENOMEM; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - priv->regs = devm_ioremap_resource(dev, res); + priv->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(priv->regs)) return PTR_ERR(priv->regs); diff --git a/drivers/nvmem/stm32-romem.c b/drivers/nvmem/stm32-romem.c index ba779e26937a..38d0bf557129 100644 --- a/drivers/nvmem/stm32-romem.c +++ b/drivers/nvmem/stm32-romem.c @@ -268,7 +268,7 @@ static const struct stm32_romem_cfg stm32mp13_bsec_cfg = { .ta = true, }; -static const struct of_device_id stm32_romem_of_match[] = { +static const struct of_device_id stm32_romem_of_match[] __maybe_unused = { { .compatible = "st,stm32f4-otp", }, { .compatible = "st,stm32mp15-bsec", .data = (void *)&stm32mp15_bsec_cfg, diff --git a/drivers/nvmem/u-boot-env.c b/drivers/nvmem/u-boot-env.c index 29b1d87a3c51..ee9fd9989b6e 100644 --- a/drivers/nvmem/u-boot-env.c +++ b/drivers/nvmem/u-boot-env.c @@ -4,6 +4,8 @@ */ #include <linux/crc32.h> +#include <linux/etherdevice.h> +#include <linux/if_ether.h> #include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/mtd/mtd.h> @@ -70,6 +72,25 @@ static int u_boot_env_read(void *context, unsigned int offset, void *val, return 0; } +static int u_boot_env_read_post_process_ethaddr(void *context, const char *id, int index, + unsigned int offset, void *buf, size_t bytes) +{ + u8 mac[ETH_ALEN]; + + if (bytes != 3 * ETH_ALEN - 1) + return -EINVAL; + + if (!mac_pton(buf, mac)) + return -EINVAL; + + if (index) + eth_addr_add(mac, index); + + ether_addr_copy(buf, mac); + + return 0; +} + static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf, size_t data_offset, size_t data_len) { @@ -101,6 +122,11 @@ static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf, priv->cells[idx].offset = data_offset + value - data; priv->cells[idx].bytes = strlen(value); priv->cells[idx].np = of_get_child_by_name(dev->of_node, priv->cells[idx].name); + if (!strcmp(var, "ethaddr")) { + priv->cells[idx].raw_len = strlen(value); + priv->cells[idx].bytes = ETH_ALEN; + priv->cells[idx].read_post_process = u_boot_env_read_post_process_ethaddr; + } } if (WARN_ON(idx != priv->ncells)) diff --git a/drivers/nvmem/vf610-ocotp.c b/drivers/nvmem/vf610-ocotp.c index 5b6cad16892f..ee9c61ae727d 100644 --- a/drivers/nvmem/vf610-ocotp.c +++ b/drivers/nvmem/vf610-ocotp.c @@ -219,8 +219,7 @@ static int vf610_ocotp_probe(struct platform_device *pdev) if (!ocotp_dev) return -ENOMEM; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - ocotp_dev->base = devm_ioremap_resource(dev, res); + ocotp_dev->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); if (IS_ERR(ocotp_dev->base)) return PTR_ERR(ocotp_dev->base); diff --git a/drivers/of/Makefile b/drivers/of/Makefile index 10f704592561..eff624854575 100644 --- a/drivers/of/Makefile +++ b/drivers/of/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 -obj-y = base.o cpu.o device.o platform.o property.o +obj-y = base.o cpu.o device.o module.o platform.o property.o obj-$(CONFIG_OF_KOBJ) += kobj.o obj-$(CONFIG_OF_DYNAMIC) += dynamic.o obj-$(CONFIG_OF_FLATTREE) += fdt.o diff --git a/drivers/of/base.c b/drivers/of/base.c index 7f1720af813c..166fb7d75337 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -1021,19 +1021,23 @@ struct device_node *of_find_matching_node_and_match(struct device_node *from, EXPORT_SYMBOL(of_find_matching_node_and_match); /** - * of_modalias_node - Lookup appropriate modalias for a device node + * of_alias_from_compatible - Lookup appropriate alias for a device node + * depending on compatible * @node: pointer to a device tree node - * @modalias: Pointer to buffer that modalias value will be copied into - * @len: Length of modalias value + * @alias: Pointer to buffer that alias value will be copied into + * @len: Length of alias value * * Based on the value of the compatible property, this routine will attempt - * to choose an appropriate modalias value for a particular device tree node. + * to choose an appropriate alias value for a particular device tree node. * It does this by stripping the manufacturer prefix (as delimited by a ',') * from the first entry in the compatible list property. * + * Note: The matching on just the "product" side of the compatible is a relic + * from I2C and SPI. Please do not add any new user. + * * Return: This routine returns 0 on success, <0 on failure. */ -int of_modalias_node(struct device_node *node, char *modalias, int len) +int of_alias_from_compatible(const struct device_node *node, char *alias, int len) { const char *compatible, *p; int cplen; @@ -1042,10 +1046,10 @@ int of_modalias_node(struct device_node *node, char *modalias, int len) if (!compatible || strlen(compatible) > cplen) return -ENODEV; p = strchr(compatible, ','); - strscpy(modalias, p ? p + 1 : compatible, len); + strscpy(alias, p ? p + 1 : compatible, len); return 0; } -EXPORT_SYMBOL_GPL(of_modalias_node); +EXPORT_SYMBOL_GPL(of_alias_from_compatible); /** * of_find_node_by_phandle - Find a node given a phandle diff --git a/drivers/of/device.c b/drivers/of/device.c index 955bfb3d1a83..0f00f1b80708 100644 --- a/drivers/of/device.c +++ b/drivers/of/device.c @@ -1,5 +1,4 @@ // SPDX-License-Identifier: GPL-2.0 -#include <linux/string.h> #include <linux/kernel.h> #include <linux/of.h> #include <linux/of_device.h> @@ -9,7 +8,6 @@ #include <linux/dma-direct.h> /* for bus_dma_region */ #include <linux/dma-map-ops.h> #include <linux/init.h> -#include <linux/module.h> #include <linux/mod_devicetable.h> #include <linux/slab.h> #include <linux/platform_device.h> @@ -248,68 +246,6 @@ const void *of_device_get_match_data(const struct device *dev) } EXPORT_SYMBOL(of_device_get_match_data); -static ssize_t of_device_get_modalias(const struct device *dev, char *str, ssize_t len) -{ - const char *compat; - char *c; - struct property *p; - ssize_t csize; - ssize_t tsize; - - if ((!dev) || (!dev->of_node) || dev->of_node_reused) - return -ENODEV; - - /* Name & Type */ - /* %p eats all alphanum characters, so %c must be used here */ - csize = snprintf(str, len, "of:N%pOFn%c%s", dev->of_node, 'T', - of_node_get_device_type(dev->of_node)); - tsize = csize; - len -= csize; - if (str) - str += csize; - - of_property_for_each_string(dev->of_node, "compatible", p, compat) { - csize = strlen(compat) + 1; - tsize += csize; - if (csize > len) - continue; - - csize = snprintf(str, len, "C%s", compat); - for (c = str; c; ) { - c = strchr(c, ' '); - if (c) - *c++ = '_'; - } - len -= csize; - str += csize; - } - - return tsize; -} - -int of_device_request_module(struct device *dev) -{ - char *str; - ssize_t size; - int ret; - - size = of_device_get_modalias(dev, NULL, 0); - if (size < 0) - return size; - - str = kmalloc(size + 1, GFP_KERNEL); - if (!str) - return -ENOMEM; - - of_device_get_modalias(dev, str, size); - str[size] = '\0'; - ret = request_module(str); - kfree(str); - - return ret; -} -EXPORT_SYMBOL_GPL(of_device_request_module); - /** * of_device_modalias - Fill buffer with newline terminated modalias string * @dev: Calling device @@ -318,7 +254,12 @@ EXPORT_SYMBOL_GPL(of_device_request_module); */ ssize_t of_device_modalias(struct device *dev, char *str, ssize_t len) { - ssize_t sl = of_device_get_modalias(dev, str, len - 2); + ssize_t sl; + + if (!dev || !dev->of_node || dev->of_node_reused) + return -ENODEV; + + sl = of_modalias(dev->of_node, str, len - 2); if (sl < 0) return sl; if (sl > len - 2) @@ -383,8 +324,8 @@ int of_device_uevent_modalias(const struct device *dev, struct kobj_uevent_env * if (add_uevent_var(env, "MODALIAS=")) return -ENOMEM; - sl = of_device_get_modalias(dev, &env->buf[env->buflen-1], - sizeof(env->buf) - env->buflen); + sl = of_modalias(dev->of_node, &env->buf[env->buflen-1], + sizeof(env->buf) - env->buflen); if (sl < 0) return sl; if (sl >= (sizeof(env->buf) - env->buflen)) diff --git a/drivers/of/module.c b/drivers/of/module.c new file mode 100644 index 000000000000..0e8aa974f0f2 --- /dev/null +++ b/drivers/of/module.c @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Linux kernel module helpers. + */ + +#include <linux/of.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/string.h> + +ssize_t of_modalias(const struct device_node *np, char *str, ssize_t len) +{ + const char *compat; + char *c; + struct property *p; + ssize_t csize; + ssize_t tsize; + + /* Name & Type */ + /* %p eats all alphanum characters, so %c must be used here */ + csize = snprintf(str, len, "of:N%pOFn%c%s", np, 'T', + of_node_get_device_type(np)); + tsize = csize; + len -= csize; + if (str) + str += csize; + + of_property_for_each_string(np, "compatible", p, compat) { + csize = strlen(compat) + 1; + tsize += csize; + if (csize > len) + continue; + + csize = snprintf(str, len, "C%s", compat); + for (c = str; c; ) { + c = strchr(c, ' '); + if (c) + *c++ = '_'; + } + len -= csize; + str += csize; + } + + return tsize; +} + +int of_request_module(const struct device_node *np) +{ + char *str; + ssize_t size; + int ret; + + if (!np) + return -ENODEV; + + size = of_modalias(np, NULL, 0); + if (size < 0) + return size; + + /* Reserve an additional byte for the trailing '\0' */ + size++; + + str = kmalloc(size, GFP_KERNEL); + if (!str) + return -ENOMEM; + + of_modalias(np, str, size); + str[size - 1] = '\0'; + ret = request_module(str); + kfree(str); + + return ret; +} +EXPORT_SYMBOL_GPL(of_request_module); diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index a12420e28640..9291b2a0e887 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -2355,8 +2355,8 @@ of_register_spi_device(struct spi_controller *ctlr, struct device_node *nc) } /* Select device driver */ - rc = of_modalias_node(nc, spi->modalias, - sizeof(spi->modalias)); + rc = of_alias_from_compatible(nc, spi->modalias, + sizeof(spi->modalias)); if (rc < 0) { dev_err(&ctlr->dev, "cannot find modalias for %pOF\n", nc); goto err_out; diff --git a/drivers/spmi/hisi-spmi-controller.c b/drivers/spmi/hisi-spmi-controller.c index 5bd23262abd6..9cbd473487cb 100644 --- a/drivers/spmi/hisi-spmi-controller.c +++ b/drivers/spmi/hisi-spmi-controller.c @@ -324,13 +324,12 @@ err_put_controller: return ret; } -static int spmi_del_controller(struct platform_device *pdev) +static void spmi_del_controller(struct platform_device *pdev) { struct spmi_controller *ctrl = platform_get_drvdata(pdev); spmi_controller_remove(ctrl); spmi_controller_put(ctrl); - return 0; } static const struct of_device_id spmi_controller_match_table[] = { @@ -343,7 +342,7 @@ MODULE_DEVICE_TABLE(of, spmi_controller_match_table); static struct platform_driver spmi_controller_driver = { .probe = spmi_controller_probe, - .remove = spmi_del_controller, + .remove_new = spmi_del_controller, .driver = { .name = "hisi_spmi_controller", .of_match_table = spmi_controller_match_table, diff --git a/drivers/spmi/spmi-mtk-pmif.c b/drivers/spmi/spmi-mtk-pmif.c index ad511f2c3324..b3c991e1ea40 100644 --- a/drivers/spmi/spmi-mtk-pmif.c +++ b/drivers/spmi/spmi-mtk-pmif.c @@ -503,7 +503,7 @@ err_put_ctrl: return err; } -static int mtk_spmi_remove(struct platform_device *pdev) +static void mtk_spmi_remove(struct platform_device *pdev) { struct spmi_controller *ctrl = platform_get_drvdata(pdev); struct pmif *arb = spmi_controller_get_drvdata(ctrl); @@ -511,7 +511,6 @@ static int mtk_spmi_remove(struct platform_device *pdev) clk_bulk_disable_unprepare(arb->nclks, arb->clks); spmi_controller_remove(ctrl); spmi_controller_put(ctrl); - return 0; } static const struct of_device_id mtk_spmi_match_table[] = { @@ -530,10 +529,10 @@ MODULE_DEVICE_TABLE(of, mtk_spmi_match_table); static struct platform_driver mtk_spmi_driver = { .driver = { .name = "spmi-mtk", - .of_match_table = of_match_ptr(mtk_spmi_match_table), + .of_match_table = mtk_spmi_match_table, }, .probe = mtk_spmi_probe, - .remove = mtk_spmi_remove, + .remove_new = mtk_spmi_remove, }; module_platform_driver(mtk_spmi_driver); diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c index 8b6a42ab816f..dcb675d980d4 100644 --- a/drivers/spmi/spmi-pmic-arb.c +++ b/drivers/spmi/spmi-pmic-arb.c @@ -126,7 +126,7 @@ struct apid_data { }; /** - * spmi_pmic_arb - SPMI PMIC Arbiter object + * struct spmi_pmic_arb - SPMI PMIC Arbiter object * * @rd_base: on v1 "core", on v2 "observer" register base off DT. * @wr_base: on v1 "core", on v2 "chnls" register base off DT. @@ -180,7 +180,7 @@ struct spmi_pmic_arb { }; /** - * pmic_arb_ver: version dependent functionality. + * struct pmic_arb_ver_ops - version dependent functionality. * * @ver_str: version string. * @ppid_to_apid: finds the apid for a given ppid. @@ -1674,7 +1674,7 @@ err_put_ctrl: return err; } -static int spmi_pmic_arb_remove(struct platform_device *pdev) +static void spmi_pmic_arb_remove(struct platform_device *pdev) { struct spmi_controller *ctrl = platform_get_drvdata(pdev); struct spmi_pmic_arb *pmic_arb = spmi_controller_get_drvdata(ctrl); @@ -1682,7 +1682,6 @@ static int spmi_pmic_arb_remove(struct platform_device *pdev) irq_set_chained_handler_and_data(pmic_arb->irq, NULL, NULL); irq_domain_remove(pmic_arb->domain); spmi_controller_put(ctrl); - return 0; } static const struct of_device_id spmi_pmic_arb_match_table[] = { @@ -1693,7 +1692,7 @@ MODULE_DEVICE_TABLE(of, spmi_pmic_arb_match_table); static struct platform_driver spmi_pmic_arb_driver = { .probe = spmi_pmic_arb_probe, - .remove = spmi_pmic_arb_remove, + .remove_new = spmi_pmic_arb_remove, .driver = { .name = "spmi_pmic_arb", .of_match_table = spmi_pmic_arb_match_table, diff --git a/drivers/spmi/spmi.c b/drivers/spmi/spmi.c index 73551531ed43..7313d4c18a04 100644 --- a/drivers/spmi/spmi.c +++ b/drivers/spmi/spmi.c @@ -350,7 +350,8 @@ static void spmi_drv_remove(struct device *dev) const struct spmi_driver *sdrv = to_spmi_driver(dev->driver); pm_runtime_get_sync(dev); - sdrv->remove(to_spmi_device(dev)); + if (sdrv->remove) + sdrv->remove(to_spmi_device(dev)); pm_runtime_put_noidle(dev); pm_runtime_disable(dev); @@ -404,7 +405,7 @@ struct spmi_device *spmi_device_from_of(struct device_node *np) EXPORT_SYMBOL_GPL(spmi_device_from_of); /** - * spmi_controller_alloc() - Allocate a new SPMI device + * spmi_device_alloc() - Allocate a new SPMI device * @ctrl: associated controller * * Caller is responsible for either calling spmi_device_add() to add the @@ -582,8 +583,9 @@ void spmi_controller_remove(struct spmi_controller *ctrl) EXPORT_SYMBOL_GPL(spmi_controller_remove); /** - * spmi_driver_register() - Register client driver with SPMI core + * __spmi_driver_register() - Register client driver with SPMI core * @sdrv: client driver to be associated with client-device. + * @owner: module owner * * This API will register the client driver with the SPMI framework. * It is typically called from the driver's module-init function. diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig index afd05bf3345e..d3968fe2ebb8 100644 --- a/drivers/staging/iio/Kconfig +++ b/drivers/staging/iio/Kconfig @@ -10,7 +10,6 @@ source "drivers/staging/iio/adc/Kconfig" source "drivers/staging/iio/addac/Kconfig" source "drivers/staging/iio/frequency/Kconfig" source "drivers/staging/iio/impedance-analyzer/Kconfig" -source "drivers/staging/iio/meter/Kconfig" source "drivers/staging/iio/resolver/Kconfig" endmenu diff --git a/drivers/staging/iio/Makefile b/drivers/staging/iio/Makefile index 5ed56fe57e14..c50f1019f829 100644 --- a/drivers/staging/iio/Makefile +++ b/drivers/staging/iio/Makefile @@ -8,5 +8,4 @@ obj-y += adc/ obj-y += addac/ obj-y += frequency/ obj-y += impedance-analyzer/ -obj-y += meter/ obj-y += resolver/ diff --git a/drivers/staging/iio/meter/Kconfig b/drivers/staging/iio/meter/Kconfig deleted file mode 100644 index aa6a3e7f6cdb..000000000000 --- a/drivers/staging/iio/meter/Kconfig +++ /dev/null @@ -1,37 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# IIO meter drivers configuration -# -menu "Active energy metering IC" - -config ADE7854 - tristate "Analog Devices ADE7854/58/68/78 Polyphase Multifunction Energy Metering IC Driver" - depends on SPI || I2C - help - Say yes here to build support for Analog Devices ADE7854/58/68/78 Polyphase - Multifunction Energy Metering IC Driver. - - To compile this driver as a module, choose M here: the - module will be called ade7854. - -config ADE7854_I2C - tristate "support I2C bus connection" - depends on ADE7854 && I2C - default y - help - Say Y here if you have ADE7854/58/68/78 hooked to an I2C bus. - - To compile this driver as a module, choose M here: the - module will be called ade7854-i2c. - -config ADE7854_SPI - tristate "support SPI bus connection" - depends on ADE7854 && SPI - default y - help - Say Y here if you have ADE7854/58/68/78 hooked to a SPI bus. - - To compile this driver as a module, choose M here: the - module will be called ade7854-spi. - -endmenu diff --git a/drivers/staging/iio/meter/Makefile b/drivers/staging/iio/meter/Makefile deleted file mode 100644 index ed4547e38f3a..000000000000 --- a/drivers/staging/iio/meter/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for metering ic drivers -# - -obj-$(CONFIG_ADE7854) += ade7854.o -obj-$(CONFIG_ADE7854_I2C) += ade7854-i2c.o -obj-$(CONFIG_ADE7854_SPI) += ade7854-spi.o diff --git a/drivers/staging/iio/meter/ade7854-i2c.c b/drivers/staging/iio/meter/ade7854-i2c.c deleted file mode 100644 index 572d714eb0dd..000000000000 --- a/drivers/staging/iio/meter/ade7854-i2c.c +++ /dev/null @@ -1,153 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * ADE7854/58/68/78 Polyphase Multifunction Energy Metering IC Driver (I2C Bus) - * - * Copyright 2010 Analog Devices Inc. - */ - -#include <linux/device.h> -#include <linux/kernel.h> -#include <linux/i2c.h> -#include <linux/slab.h> -#include <linux/module.h> - -#include <linux/iio/iio.h> -#include "ade7854.h" - -static int ade7854_i2c_write_reg(struct device *dev, - u16 reg_address, - u32 val, - int bits) -{ - int ret; - int count; - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ade7854_state *st = iio_priv(indio_dev); - - mutex_lock(&st->buf_lock); - st->tx[0] = (reg_address >> 8) & 0xFF; - st->tx[1] = reg_address & 0xFF; - - switch (bits) { - case 8: - st->tx[2] = val & 0xFF; - count = 3; - break; - case 16: - st->tx[2] = (val >> 8) & 0xFF; - st->tx[3] = val & 0xFF; - count = 4; - break; - case 24: - st->tx[2] = (val >> 16) & 0xFF; - st->tx[3] = (val >> 8) & 0xFF; - st->tx[4] = val & 0xFF; - count = 5; - break; - case 32: - st->tx[2] = (val >> 24) & 0xFF; - st->tx[3] = (val >> 16) & 0xFF; - st->tx[4] = (val >> 8) & 0xFF; - st->tx[5] = val & 0xFF; - count = 6; - break; - default: - ret = -EINVAL; - goto unlock; - } - - ret = i2c_master_send(st->i2c, st->tx, count); - -unlock: - mutex_unlock(&st->buf_lock); - - if (ret < 0) - return ret; - - return 0; -} - -static int ade7854_i2c_read_reg(struct device *dev, - u16 reg_address, - u32 *val, - int bits) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ade7854_state *st = iio_priv(indio_dev); - int ret; - - mutex_lock(&st->buf_lock); - st->tx[0] = (reg_address >> 8) & 0xFF; - st->tx[1] = reg_address & 0xFF; - - ret = i2c_master_send(st->i2c, st->tx, 2); - if (ret < 0) - goto unlock; - - ret = i2c_master_recv(st->i2c, st->rx, bits); - if (ret < 0) - goto unlock; - - switch (bits) { - case 8: - *val = st->rx[0]; - break; - case 16: - *val = (st->rx[0] << 8) | st->rx[1]; - break; - case 24: - *val = (st->rx[0] << 16) | (st->rx[1] << 8) | st->rx[2]; - break; - case 32: - *val = (st->rx[0] << 24) | (st->rx[1] << 16) | - (st->rx[2] << 8) | st->rx[3]; - break; - default: - ret = -EINVAL; - goto unlock; - } - -unlock: - mutex_unlock(&st->buf_lock); - return ret; -} - -static int ade7854_i2c_probe(struct i2c_client *client) -{ - struct ade7854_state *st; - struct iio_dev *indio_dev; - - indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st)); - if (!indio_dev) - return -ENOMEM; - st = iio_priv(indio_dev); - i2c_set_clientdata(client, indio_dev); - st->read_reg = ade7854_i2c_read_reg; - st->write_reg = ade7854_i2c_write_reg; - st->i2c = client; - st->irq = client->irq; - - return ade7854_probe(indio_dev, &client->dev); -} - -static const struct i2c_device_id ade7854_id[] = { - { "ade7854", 0 }, - { "ade7858", 0 }, - { "ade7868", 0 }, - { "ade7878", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, ade7854_id); - -static struct i2c_driver ade7854_i2c_driver = { - .driver = { - .name = "ade7854", - }, - .probe_new = ade7854_i2c_probe, - .id_table = ade7854_id, -}; -module_i2c_driver(ade7854_i2c_driver); - -MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); -MODULE_DESCRIPTION("Analog Devices ADE7854/58/68/78 Polyphase Multifunction Energy Metering IC I2C Driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/iio/meter/ade7854-spi.c b/drivers/staging/iio/meter/ade7854-spi.c deleted file mode 100644 index f12a6c8b3e88..000000000000 --- a/drivers/staging/iio/meter/ade7854-spi.c +++ /dev/null @@ -1,160 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * ADE7854/58/68/78 Polyphase Multifunction Energy Metering IC Driver (SPI Bus) - * - * Copyright 2010 Analog Devices Inc. - */ - -#include <linux/device.h> -#include <linux/kernel.h> -#include <linux/spi/spi.h> -#include <linux/slab.h> -#include <linux/module.h> - -#include <linux/iio/iio.h> -#include "ade7854.h" - -static int ade7854_spi_write_reg(struct device *dev, - u16 reg_address, - u32 val, - int bits) -{ - int ret; - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ade7854_state *st = iio_priv(indio_dev); - struct spi_transfer xfer = { - .tx_buf = st->tx, - .bits_per_word = 8, - .len = 4, - }; - - mutex_lock(&st->buf_lock); - st->tx[0] = ADE7854_WRITE_REG; - st->tx[1] = (reg_address >> 8) & 0xFF; - st->tx[2] = reg_address & 0xFF; - switch (bits) { - case 8: - st->tx[3] = val & 0xFF; - break; - case 16: - xfer.len = 5; - st->tx[3] = (val >> 8) & 0xFF; - st->tx[4] = val & 0xFF; - break; - case 24: - xfer.len = 6; - st->tx[3] = (val >> 16) & 0xFF; - st->tx[4] = (val >> 8) & 0xFF; - st->tx[5] = val & 0xFF; - break; - case 32: - xfer.len = 7; - st->tx[3] = (val >> 24) & 0xFF; - st->tx[4] = (val >> 16) & 0xFF; - st->tx[5] = (val >> 8) & 0xFF; - st->tx[6] = val & 0xFF; - break; - default: - ret = -EINVAL; - goto unlock; - } - - ret = spi_sync_transfer(st->spi, &xfer, 1); -unlock: - mutex_unlock(&st->buf_lock); - - return ret; -} - -static int ade7854_spi_read_reg(struct device *dev, - u16 reg_address, - u32 *val, - int bits) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ade7854_state *st = iio_priv(indio_dev); - int ret; - struct spi_transfer xfers[] = { - { - .tx_buf = st->tx, - .bits_per_word = 8, - .len = 3, - }, { - .rx_buf = st->rx, - .bits_per_word = 8, - .len = bits, - } - }; - - mutex_lock(&st->buf_lock); - - st->tx[0] = ADE7854_READ_REG; - st->tx[1] = (reg_address >> 8) & 0xFF; - st->tx[2] = reg_address & 0xFF; - - ret = spi_sync_transfer(st->spi, xfers, ARRAY_SIZE(xfers)); - if (ret < 0) { - dev_err(&st->spi->dev, "problem when reading register 0x%02X", - reg_address); - goto unlock; - } - - switch (bits) { - case 8: - *val = st->rx[0]; - break; - case 16: - *val = be16_to_cpup((const __be16 *)st->rx); - break; - case 24: - *val = (st->rx[0] << 16) | (st->rx[1] << 8) | st->rx[2]; - break; - case 32: - *val = be32_to_cpup((const __be32 *)st->rx); - break; - } - -unlock: - mutex_unlock(&st->buf_lock); - return ret; -} - -static int ade7854_spi_probe(struct spi_device *spi) -{ - struct ade7854_state *st; - struct iio_dev *indio_dev; - - indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); - if (!indio_dev) - return -ENOMEM; - st = iio_priv(indio_dev); - spi_set_drvdata(spi, indio_dev); - st->read_reg = ade7854_spi_read_reg; - st->write_reg = ade7854_spi_write_reg; - st->irq = spi->irq; - st->spi = spi; - - return ade7854_probe(indio_dev, &spi->dev); -} - -static const struct spi_device_id ade7854_id[] = { - { "ade7854", 0 }, - { "ade7858", 0 }, - { "ade7868", 0 }, - { "ade7878", 0 }, - { } -}; -MODULE_DEVICE_TABLE(spi, ade7854_id); - -static struct spi_driver ade7854_driver = { - .driver = { - .name = "ade7854", - }, - .probe = ade7854_spi_probe, - .id_table = ade7854_id, -}; -module_spi_driver(ade7854_driver); - -MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); -MODULE_DESCRIPTION("Analog Devices ADE7854/58/68/78 SPI Driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/iio/meter/ade7854.c b/drivers/staging/iio/meter/ade7854.c deleted file mode 100644 index 68da6ecde6a3..000000000000 --- a/drivers/staging/iio/meter/ade7854.c +++ /dev/null @@ -1,556 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * ADE7854/58/68/78 Polyphase Multifunction Energy Metering IC Driver - * - * Copyright 2010 Analog Devices Inc. - */ - -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/delay.h> -#include <linux/mutex.h> -#include <linux/device.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/sysfs.h> -#include <linux/list.h> -#include <linux/module.h> - -#include <linux/iio/iio.h> -#include <linux/iio/sysfs.h> -#include "meter.h" -#include "ade7854.h" - -static ssize_t ade7854_read_8bit(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - int ret; - u32 val = 0; - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ade7854_state *st = iio_priv(indio_dev); - struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); - - ret = st->read_reg(dev, this_attr->address, &val, 8); - if (ret < 0) - return ret; - - return sprintf(buf, "%u\n", val); -} - -static ssize_t ade7854_read_16bit(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - int ret; - u32 val = 0; - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ade7854_state *st = iio_priv(indio_dev); - struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); - - ret = st->read_reg(dev, this_attr->address, &val, 16); - if (ret < 0) - return ret; - - return sprintf(buf, "%u\n", val); -} - -static ssize_t ade7854_read_24bit(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - int ret; - u32 val; - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ade7854_state *st = iio_priv(indio_dev); - struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); - - ret = st->read_reg(dev, this_attr->address, &val, 24); - if (ret < 0) - return ret; - - return sprintf(buf, "%u\n", val); -} - -static ssize_t ade7854_read_32bit(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - int ret; - u32 val = 0; - struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ade7854_state *st = iio_priv(indio_dev); - - ret = st->read_reg(dev, this_attr->address, &val, 32); - if (ret < 0) - return ret; - - return sprintf(buf, "%u\n", val); -} - -static ssize_t ade7854_write_8bit(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ade7854_state *st = iio_priv(indio_dev); - - int ret; - u8 val; - - ret = kstrtou8(buf, 10, &val); - if (ret) - goto error_ret; - ret = st->write_reg(dev, this_attr->address, val, 8); - -error_ret: - return ret ? ret : len; -} - -static ssize_t ade7854_write_16bit(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ade7854_state *st = iio_priv(indio_dev); - - int ret; - u16 val; - - ret = kstrtou16(buf, 10, &val); - if (ret) - goto error_ret; - ret = st->write_reg(dev, this_attr->address, val, 16); - -error_ret: - return ret ? ret : len; -} - -static ssize_t ade7854_write_24bit(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ade7854_state *st = iio_priv(indio_dev); - - int ret; - u32 val; - - ret = kstrtou32(buf, 10, &val); - if (ret) - goto error_ret; - ret = st->write_reg(dev, this_attr->address, val, 24); - -error_ret: - return ret ? ret : len; -} - -static ssize_t ade7854_write_32bit(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ade7854_state *st = iio_priv(indio_dev); - - int ret; - u32 val; - - ret = kstrtou32(buf, 10, &val); - if (ret) - goto error_ret; - ret = st->write_reg(dev, this_attr->address, val, 32); - -error_ret: - return ret ? ret : len; -} - -static int ade7854_reset(struct device *dev) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ade7854_state *st = iio_priv(indio_dev); - u32 val; - - st->read_reg(dev, ADE7854_CONFIG, &val, 16); - val |= BIT(7); /* Software Chip Reset */ - - return st->write_reg(dev, ADE7854_CONFIG, val, 16); -} - -static IIO_DEV_ATTR_AIGAIN(0644, - ade7854_read_24bit, - ade7854_write_24bit, - ADE7854_AIGAIN); -static IIO_DEV_ATTR_BIGAIN(0644, - ade7854_read_24bit, - ade7854_write_24bit, - ADE7854_BIGAIN); -static IIO_DEV_ATTR_CIGAIN(0644, - ade7854_read_24bit, - ade7854_write_24bit, - ADE7854_CIGAIN); -static IIO_DEV_ATTR_NIGAIN(0644, - ade7854_read_24bit, - ade7854_write_24bit, - ADE7854_NIGAIN); -static IIO_DEV_ATTR_AVGAIN(0644, - ade7854_read_24bit, - ade7854_write_24bit, - ADE7854_AVGAIN); -static IIO_DEV_ATTR_BVGAIN(0644, - ade7854_read_24bit, - ade7854_write_24bit, - ADE7854_BVGAIN); -static IIO_DEV_ATTR_CVGAIN(0644, - ade7854_read_24bit, - ade7854_write_24bit, - ADE7854_CVGAIN); -static IIO_DEV_ATTR_APPARENT_POWER_A_GAIN(0644, - ade7854_read_24bit, - ade7854_write_24bit, - ADE7854_AVAGAIN); -static IIO_DEV_ATTR_APPARENT_POWER_B_GAIN(0644, - ade7854_read_24bit, - ade7854_write_24bit, - ADE7854_BVAGAIN); -static IIO_DEV_ATTR_APPARENT_POWER_C_GAIN(0644, - ade7854_read_24bit, - ade7854_write_24bit, - ADE7854_CVAGAIN); -static IIO_DEV_ATTR_ACTIVE_POWER_A_OFFSET(0644, - ade7854_read_24bit, - ade7854_write_24bit, - ADE7854_AWATTOS); -static IIO_DEV_ATTR_ACTIVE_POWER_B_OFFSET(0644, - ade7854_read_24bit, - ade7854_write_24bit, - ADE7854_BWATTOS); -static IIO_DEV_ATTR_ACTIVE_POWER_C_OFFSET(0644, - ade7854_read_24bit, - ade7854_write_24bit, - ADE7854_CWATTOS); -static IIO_DEV_ATTR_REACTIVE_POWER_A_GAIN(0644, - ade7854_read_24bit, - ade7854_write_24bit, - ADE7854_AVARGAIN); -static IIO_DEV_ATTR_REACTIVE_POWER_B_GAIN(0644, - ade7854_read_24bit, - ade7854_write_24bit, - ADE7854_BVARGAIN); -static IIO_DEV_ATTR_REACTIVE_POWER_C_GAIN(0644, - ade7854_read_24bit, - ade7854_write_24bit, - ADE7854_CVARGAIN); -static IIO_DEV_ATTR_REACTIVE_POWER_A_OFFSET(0644, - ade7854_read_24bit, - ade7854_write_24bit, - ADE7854_AVAROS); -static IIO_DEV_ATTR_REACTIVE_POWER_B_OFFSET(0644, - ade7854_read_24bit, - ade7854_write_24bit, - ADE7854_BVAROS); -static IIO_DEV_ATTR_REACTIVE_POWER_C_OFFSET(0644, - ade7854_read_24bit, - ade7854_write_24bit, - ADE7854_CVAROS); -static IIO_DEV_ATTR_VPEAK(0644, - ade7854_read_32bit, - ade7854_write_32bit, - ADE7854_VPEAK); -static IIO_DEV_ATTR_IPEAK(0644, - ade7854_read_32bit, - ade7854_write_32bit, - ADE7854_IPEAK); -static IIO_DEV_ATTR_APHCAL(0644, - ade7854_read_16bit, - ade7854_write_16bit, - ADE7854_APHCAL); -static IIO_DEV_ATTR_BPHCAL(0644, - ade7854_read_16bit, - ade7854_write_16bit, - ADE7854_BPHCAL); -static IIO_DEV_ATTR_CPHCAL(0644, - ade7854_read_16bit, - ade7854_write_16bit, - ADE7854_CPHCAL); -static IIO_DEV_ATTR_CF1DEN(0644, - ade7854_read_16bit, - ade7854_write_16bit, - ADE7854_CF1DEN); -static IIO_DEV_ATTR_CF2DEN(0644, - ade7854_read_16bit, - ade7854_write_16bit, - ADE7854_CF2DEN); -static IIO_DEV_ATTR_CF3DEN(0644, - ade7854_read_16bit, - ade7854_write_16bit, - ADE7854_CF3DEN); -static IIO_DEV_ATTR_LINECYC(0644, - ade7854_read_16bit, - ade7854_write_16bit, - ADE7854_LINECYC); -static IIO_DEV_ATTR_SAGCYC(0644, - ade7854_read_8bit, - ade7854_write_8bit, - ADE7854_SAGCYC); -static IIO_DEV_ATTR_CFCYC(0644, - ade7854_read_8bit, - ade7854_write_8bit, - ADE7854_CFCYC); -static IIO_DEV_ATTR_PEAKCYC(0644, - ade7854_read_8bit, - ade7854_write_8bit, - ADE7854_PEAKCYC); -static IIO_DEV_ATTR_CHKSUM(ade7854_read_24bit, - ADE7854_CHECKSUM); -static IIO_DEV_ATTR_ANGLE0(ade7854_read_24bit, - ADE7854_ANGLE0); -static IIO_DEV_ATTR_ANGLE1(ade7854_read_24bit, - ADE7854_ANGLE1); -static IIO_DEV_ATTR_ANGLE2(ade7854_read_24bit, - ADE7854_ANGLE2); -static IIO_DEV_ATTR_AIRMS(0444, - ade7854_read_24bit, - NULL, - ADE7854_AIRMS); -static IIO_DEV_ATTR_BIRMS(0444, - ade7854_read_24bit, - NULL, - ADE7854_BIRMS); -static IIO_DEV_ATTR_CIRMS(0444, - ade7854_read_24bit, - NULL, - ADE7854_CIRMS); -static IIO_DEV_ATTR_NIRMS(0444, - ade7854_read_24bit, - NULL, - ADE7854_NIRMS); -static IIO_DEV_ATTR_AVRMS(0444, - ade7854_read_24bit, - NULL, - ADE7854_AVRMS); -static IIO_DEV_ATTR_BVRMS(0444, - ade7854_read_24bit, - NULL, - ADE7854_BVRMS); -static IIO_DEV_ATTR_CVRMS(0444, - ade7854_read_24bit, - NULL, - ADE7854_CVRMS); -static IIO_DEV_ATTR_AIRMSOS(0444, - ade7854_read_16bit, - ade7854_write_16bit, - ADE7854_AIRMSOS); -static IIO_DEV_ATTR_BIRMSOS(0444, - ade7854_read_16bit, - ade7854_write_16bit, - ADE7854_BIRMSOS); -static IIO_DEV_ATTR_CIRMSOS(0444, - ade7854_read_16bit, - ade7854_write_16bit, - ADE7854_CIRMSOS); -static IIO_DEV_ATTR_AVRMSOS(0444, - ade7854_read_16bit, - ade7854_write_16bit, - ADE7854_AVRMSOS); -static IIO_DEV_ATTR_BVRMSOS(0444, - ade7854_read_16bit, - ade7854_write_16bit, - ADE7854_BVRMSOS); -static IIO_DEV_ATTR_CVRMSOS(0444, - ade7854_read_16bit, - ade7854_write_16bit, - ADE7854_CVRMSOS); -static IIO_DEV_ATTR_VOLT_A(ade7854_read_24bit, - ADE7854_VAWV); -static IIO_DEV_ATTR_VOLT_B(ade7854_read_24bit, - ADE7854_VBWV); -static IIO_DEV_ATTR_VOLT_C(ade7854_read_24bit, - ADE7854_VCWV); -static IIO_DEV_ATTR_CURRENT_A(ade7854_read_24bit, - ADE7854_IAWV); -static IIO_DEV_ATTR_CURRENT_B(ade7854_read_24bit, - ADE7854_IBWV); -static IIO_DEV_ATTR_CURRENT_C(ade7854_read_24bit, - ADE7854_ICWV); -static IIO_DEV_ATTR_AWATTHR(ade7854_read_32bit, - ADE7854_AWATTHR); -static IIO_DEV_ATTR_BWATTHR(ade7854_read_32bit, - ADE7854_BWATTHR); -static IIO_DEV_ATTR_CWATTHR(ade7854_read_32bit, - ADE7854_CWATTHR); -static IIO_DEV_ATTR_AFWATTHR(ade7854_read_32bit, - ADE7854_AFWATTHR); -static IIO_DEV_ATTR_BFWATTHR(ade7854_read_32bit, - ADE7854_BFWATTHR); -static IIO_DEV_ATTR_CFWATTHR(ade7854_read_32bit, - ADE7854_CFWATTHR); -static IIO_DEV_ATTR_AVARHR(ade7854_read_32bit, - ADE7854_AVARHR); -static IIO_DEV_ATTR_BVARHR(ade7854_read_32bit, - ADE7854_BVARHR); -static IIO_DEV_ATTR_CVARHR(ade7854_read_32bit, - ADE7854_CVARHR); -static IIO_DEV_ATTR_AVAHR(ade7854_read_32bit, - ADE7854_AVAHR); -static IIO_DEV_ATTR_BVAHR(ade7854_read_32bit, - ADE7854_BVAHR); -static IIO_DEV_ATTR_CVAHR(ade7854_read_32bit, - ADE7854_CVAHR); - -static int ade7854_set_irq(struct device *dev, bool enable) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ade7854_state *st = iio_priv(indio_dev); - - int ret; - u32 irqen; - - ret = st->read_reg(dev, ADE7854_MASK0, &irqen, 32); - if (ret < 0) - return ret; - - if (enable) - irqen |= BIT(17); /* 1: interrupt enabled when all periodical - * (at 8 kHz rate) DSP computations finish. - */ - else - irqen &= ~BIT(17); - - return st->write_reg(dev, ADE7854_MASK0, irqen, 32); -} - -static int ade7854_initial_setup(struct iio_dev *indio_dev) -{ - int ret; - struct device *dev = &indio_dev->dev; - - /* Disable IRQ */ - ret = ade7854_set_irq(dev, false); - if (ret) { - dev_err(dev, "disable irq failed"); - goto err_ret; - } - - ade7854_reset(dev); - usleep_range(ADE7854_STARTUP_DELAY, ADE7854_STARTUP_DELAY + 100); - -err_ret: - return ret; -} - -static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("8000"); - -static IIO_CONST_ATTR(name, "ade7854"); - -static struct attribute *ade7854_attributes[] = { - &iio_dev_attr_aigain.dev_attr.attr, - &iio_dev_attr_bigain.dev_attr.attr, - &iio_dev_attr_cigain.dev_attr.attr, - &iio_dev_attr_nigain.dev_attr.attr, - &iio_dev_attr_avgain.dev_attr.attr, - &iio_dev_attr_bvgain.dev_attr.attr, - &iio_dev_attr_cvgain.dev_attr.attr, - &iio_dev_attr_linecyc.dev_attr.attr, - &iio_dev_attr_sagcyc.dev_attr.attr, - &iio_dev_attr_cfcyc.dev_attr.attr, - &iio_dev_attr_peakcyc.dev_attr.attr, - &iio_dev_attr_chksum.dev_attr.attr, - &iio_dev_attr_apparent_power_a_gain.dev_attr.attr, - &iio_dev_attr_apparent_power_b_gain.dev_attr.attr, - &iio_dev_attr_apparent_power_c_gain.dev_attr.attr, - &iio_dev_attr_active_power_a_offset.dev_attr.attr, - &iio_dev_attr_active_power_b_offset.dev_attr.attr, - &iio_dev_attr_active_power_c_offset.dev_attr.attr, - &iio_dev_attr_reactive_power_a_gain.dev_attr.attr, - &iio_dev_attr_reactive_power_b_gain.dev_attr.attr, - &iio_dev_attr_reactive_power_c_gain.dev_attr.attr, - &iio_dev_attr_reactive_power_a_offset.dev_attr.attr, - &iio_dev_attr_reactive_power_b_offset.dev_attr.attr, - &iio_dev_attr_reactive_power_c_offset.dev_attr.attr, - &iio_dev_attr_awatthr.dev_attr.attr, - &iio_dev_attr_bwatthr.dev_attr.attr, - &iio_dev_attr_cwatthr.dev_attr.attr, - &iio_dev_attr_afwatthr.dev_attr.attr, - &iio_dev_attr_bfwatthr.dev_attr.attr, - &iio_dev_attr_cfwatthr.dev_attr.attr, - &iio_dev_attr_avarhr.dev_attr.attr, - &iio_dev_attr_bvarhr.dev_attr.attr, - &iio_dev_attr_cvarhr.dev_attr.attr, - &iio_dev_attr_angle0.dev_attr.attr, - &iio_dev_attr_angle1.dev_attr.attr, - &iio_dev_attr_angle2.dev_attr.attr, - &iio_dev_attr_avahr.dev_attr.attr, - &iio_dev_attr_bvahr.dev_attr.attr, - &iio_dev_attr_cvahr.dev_attr.attr, - &iio_const_attr_sampling_frequency_available.dev_attr.attr, - &iio_const_attr_name.dev_attr.attr, - &iio_dev_attr_vpeak.dev_attr.attr, - &iio_dev_attr_ipeak.dev_attr.attr, - &iio_dev_attr_aphcal.dev_attr.attr, - &iio_dev_attr_bphcal.dev_attr.attr, - &iio_dev_attr_cphcal.dev_attr.attr, - &iio_dev_attr_cf1den.dev_attr.attr, - &iio_dev_attr_cf2den.dev_attr.attr, - &iio_dev_attr_cf3den.dev_attr.attr, - &iio_dev_attr_airms.dev_attr.attr, - &iio_dev_attr_birms.dev_attr.attr, - &iio_dev_attr_cirms.dev_attr.attr, - &iio_dev_attr_nirms.dev_attr.attr, - &iio_dev_attr_avrms.dev_attr.attr, - &iio_dev_attr_bvrms.dev_attr.attr, - &iio_dev_attr_cvrms.dev_attr.attr, - &iio_dev_attr_airmsos.dev_attr.attr, - &iio_dev_attr_birmsos.dev_attr.attr, - &iio_dev_attr_cirmsos.dev_attr.attr, - &iio_dev_attr_avrmsos.dev_attr.attr, - &iio_dev_attr_bvrmsos.dev_attr.attr, - &iio_dev_attr_cvrmsos.dev_attr.attr, - &iio_dev_attr_volt_a.dev_attr.attr, - &iio_dev_attr_volt_b.dev_attr.attr, - &iio_dev_attr_volt_c.dev_attr.attr, - &iio_dev_attr_current_a.dev_attr.attr, - &iio_dev_attr_current_b.dev_attr.attr, - &iio_dev_attr_current_c.dev_attr.attr, - NULL, -}; - -static const struct attribute_group ade7854_attribute_group = { - .attrs = ade7854_attributes, -}; - -static const struct iio_info ade7854_info = { - .attrs = &ade7854_attribute_group, -}; - -int ade7854_probe(struct iio_dev *indio_dev, struct device *dev) -{ - int ret; - struct ade7854_state *st = iio_priv(indio_dev); - /* setup the industrialio driver allocated elements */ - mutex_init(&st->buf_lock); - - indio_dev->dev.parent = dev; - indio_dev->info = &ade7854_info; - indio_dev->modes = INDIO_DIRECT_MODE; - - ret = devm_iio_device_register(dev, indio_dev); - if (ret) - return ret; - - /* Get the device into a sane initial state */ - return ade7854_initial_setup(indio_dev); -} -EXPORT_SYMBOL(ade7854_probe); - -MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); -MODULE_DESCRIPTION("Analog Devices ADE7854/58/68/78 Polyphase Energy Meter"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/iio/meter/ade7854.h b/drivers/staging/iio/meter/ade7854.h deleted file mode 100644 index 7a49f8f1016f..000000000000 --- a/drivers/staging/iio/meter/ade7854.h +++ /dev/null @@ -1,173 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ADE7854_H -#define _ADE7854_H - -#define ADE7854_AIGAIN 0x4380 -#define ADE7854_AVGAIN 0x4381 -#define ADE7854_BIGAIN 0x4382 -#define ADE7854_BVGAIN 0x4383 -#define ADE7854_CIGAIN 0x4384 -#define ADE7854_CVGAIN 0x4385 -#define ADE7854_NIGAIN 0x4386 -#define ADE7854_AIRMSOS 0x4387 -#define ADE7854_AVRMSOS 0x4388 -#define ADE7854_BIRMSOS 0x4389 -#define ADE7854_BVRMSOS 0x438A -#define ADE7854_CIRMSOS 0x438B -#define ADE7854_CVRMSOS 0x438C -#define ADE7854_NIRMSOS 0x438D -#define ADE7854_AVAGAIN 0x438E -#define ADE7854_BVAGAIN 0x438F -#define ADE7854_CVAGAIN 0x4390 -#define ADE7854_AWGAIN 0x4391 -#define ADE7854_AWATTOS 0x4392 -#define ADE7854_BWGAIN 0x4393 -#define ADE7854_BWATTOS 0x4394 -#define ADE7854_CWGAIN 0x4395 -#define ADE7854_CWATTOS 0x4396 -#define ADE7854_AVARGAIN 0x4397 -#define ADE7854_AVAROS 0x4398 -#define ADE7854_BVARGAIN 0x4399 -#define ADE7854_BVAROS 0x439A -#define ADE7854_CVARGAIN 0x439B -#define ADE7854_CVAROS 0x439C -#define ADE7854_AFWGAIN 0x439D -#define ADE7854_AFWATTOS 0x439E -#define ADE7854_BFWGAIN 0x439F -#define ADE7854_BFWATTOS 0x43A0 -#define ADE7854_CFWGAIN 0x43A1 -#define ADE7854_CFWATTOS 0x43A2 -#define ADE7854_AFVARGAIN 0x43A3 -#define ADE7854_AFVAROS 0x43A4 -#define ADE7854_BFVARGAIN 0x43A5 -#define ADE7854_BFVAROS 0x43A6 -#define ADE7854_CFVARGAIN 0x43A7 -#define ADE7854_CFVAROS 0x43A8 -#define ADE7854_VATHR1 0x43A9 -#define ADE7854_VATHR0 0x43AA -#define ADE7854_WTHR1 0x43AB -#define ADE7854_WTHR0 0x43AC -#define ADE7854_VARTHR1 0x43AD -#define ADE7854_VARTHR0 0x43AE -#define ADE7854_RSV 0x43AF -#define ADE7854_VANOLOAD 0x43B0 -#define ADE7854_APNOLOAD 0x43B1 -#define ADE7854_VARNOLOAD 0x43B2 -#define ADE7854_VLEVEL 0x43B3 -#define ADE7854_DICOEFF 0x43B5 -#define ADE7854_HPFDIS 0x43B6 -#define ADE7854_ISUMLVL 0x43B8 -#define ADE7854_ISUM 0x43BF -#define ADE7854_AIRMS 0x43C0 -#define ADE7854_AVRMS 0x43C1 -#define ADE7854_BIRMS 0x43C2 -#define ADE7854_BVRMS 0x43C3 -#define ADE7854_CIRMS 0x43C4 -#define ADE7854_CVRMS 0x43C5 -#define ADE7854_NIRMS 0x43C6 -#define ADE7854_RUN 0xE228 -#define ADE7854_AWATTHR 0xE400 -#define ADE7854_BWATTHR 0xE401 -#define ADE7854_CWATTHR 0xE402 -#define ADE7854_AFWATTHR 0xE403 -#define ADE7854_BFWATTHR 0xE404 -#define ADE7854_CFWATTHR 0xE405 -#define ADE7854_AVARHR 0xE406 -#define ADE7854_BVARHR 0xE407 -#define ADE7854_CVARHR 0xE408 -#define ADE7854_AFVARHR 0xE409 -#define ADE7854_BFVARHR 0xE40A -#define ADE7854_CFVARHR 0xE40B -#define ADE7854_AVAHR 0xE40C -#define ADE7854_BVAHR 0xE40D -#define ADE7854_CVAHR 0xE40E -#define ADE7854_IPEAK 0xE500 -#define ADE7854_VPEAK 0xE501 -#define ADE7854_STATUS0 0xE502 -#define ADE7854_STATUS1 0xE503 -#define ADE7854_OILVL 0xE507 -#define ADE7854_OVLVL 0xE508 -#define ADE7854_SAGLVL 0xE509 -#define ADE7854_MASK0 0xE50A -#define ADE7854_MASK1 0xE50B -#define ADE7854_IAWV 0xE50C -#define ADE7854_IBWV 0xE50D -#define ADE7854_ICWV 0xE50E -#define ADE7854_VAWV 0xE510 -#define ADE7854_VBWV 0xE511 -#define ADE7854_VCWV 0xE512 -#define ADE7854_AWATT 0xE513 -#define ADE7854_BWATT 0xE514 -#define ADE7854_CWATT 0xE515 -#define ADE7854_AVA 0xE519 -#define ADE7854_BVA 0xE51A -#define ADE7854_CVA 0xE51B -#define ADE7854_CHECKSUM 0xE51F -#define ADE7854_VNOM 0xE520 -#define ADE7854_PHSTATUS 0xE600 -#define ADE7854_ANGLE0 0xE601 -#define ADE7854_ANGLE1 0xE602 -#define ADE7854_ANGLE2 0xE603 -#define ADE7854_PERIOD 0xE607 -#define ADE7854_PHNOLOAD 0xE608 -#define ADE7854_LINECYC 0xE60C -#define ADE7854_ZXTOUT 0xE60D -#define ADE7854_COMPMODE 0xE60E -#define ADE7854_GAIN 0xE60F -#define ADE7854_CFMODE 0xE610 -#define ADE7854_CF1DEN 0xE611 -#define ADE7854_CF2DEN 0xE612 -#define ADE7854_CF3DEN 0xE613 -#define ADE7854_APHCAL 0xE614 -#define ADE7854_BPHCAL 0xE615 -#define ADE7854_CPHCAL 0xE616 -#define ADE7854_PHSIGN 0xE617 -#define ADE7854_CONFIG 0xE618 -#define ADE7854_MMODE 0xE700 -#define ADE7854_ACCMODE 0xE701 -#define ADE7854_LCYCMODE 0xE702 -#define ADE7854_PEAKCYC 0xE703 -#define ADE7854_SAGCYC 0xE704 -#define ADE7854_CFCYC 0xE705 -#define ADE7854_HSDC_CFG 0xE706 -#define ADE7854_CONFIG2 0xEC01 - -#define ADE7854_READ_REG 0x1 -#define ADE7854_WRITE_REG 0x0 - -#define ADE7854_MAX_TX 7 -#define ADE7854_MAX_RX 7 -#define ADE7854_STARTUP_DELAY 1000 - -#define ADE7854_SPI_SLOW (u32)(300 * 1000) -#define ADE7854_SPI_BURST (u32)(1000 * 1000) -#define ADE7854_SPI_FAST (u32)(2000 * 1000) - -/** - * struct ade7854_state - device instance specific data - * @spi: actual spi_device - * @read_reg Wrapper function for I2C and SPI read - * @write_reg Wrapper function for I2C and SPI write - * @indio_dev: industrial I/O device structure - * @buf_lock: mutex to protect tx and rx - * @tx: transmit buffer - * @rx: receive buffer - **/ -struct ade7854_state { - struct spi_device *spi; - struct i2c_client *i2c; - int (*read_reg)(struct device *dev, u16 reg_address, u32 *val, - int bits); - int (*write_reg)(struct device *dev, u16 reg_address, u32 val, - int bits); - int irq; - struct mutex buf_lock; - u8 tx[ADE7854_MAX_TX] __aligned(IIO_DMA_MINALIGN); - u8 rx[ADE7854_MAX_RX]; - -}; - -int ade7854_probe(struct iio_dev *indio_dev, struct device *dev); -int ade7854_remove(struct iio_dev *indio_dev); - -#endif diff --git a/drivers/staging/iio/meter/meter.h b/drivers/staging/iio/meter/meter.h deleted file mode 100644 index 5ed59bf30a25..000000000000 --- a/drivers/staging/iio/meter/meter.h +++ /dev/null @@ -1,398 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _METER_H -#define _METER_H - -#include <linux/iio/sysfs.h> - -/* metering ic types of attribute */ - -#define IIO_DEV_ATTR_CURRENT_A_OFFSET(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(current_a_offset, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_CURRENT_B_OFFSET(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(current_b_offset, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_CURRENT_C_OFFSET(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(current_c_offset, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_VOLT_A_OFFSET(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(volt_a_offset, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_VOLT_B_OFFSET(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(volt_b_offset, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_VOLT_C_OFFSET(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(volt_c_offset, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_REACTIVE_POWER_A_OFFSET(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(reactive_power_a_offset, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_REACTIVE_POWER_B_OFFSET(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(reactive_power_b_offset, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_REACTIVE_POWER_C_OFFSET(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(reactive_power_c_offset, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_ACTIVE_POWER_A_OFFSET(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(active_power_a_offset, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_ACTIVE_POWER_B_OFFSET(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(active_power_b_offset, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_ACTIVE_POWER_C_OFFSET(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(active_power_c_offset, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_CURRENT_A_GAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(current_a_gain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_CURRENT_B_GAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(current_b_gain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_CURRENT_C_GAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(current_c_gain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_APPARENT_POWER_A_GAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(apparent_power_a_gain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_APPARENT_POWER_B_GAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(apparent_power_b_gain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_APPARENT_POWER_C_GAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(apparent_power_c_gain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_ACTIVE_POWER_GAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(active_power_gain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_ACTIVE_POWER_A_GAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(active_power_a_gain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_ACTIVE_POWER_B_GAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(active_power_b_gain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_ACTIVE_POWER_C_GAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(active_power_c_gain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_REACTIVE_POWER_A_GAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(reactive_power_a_gain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_REACTIVE_POWER_B_GAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(reactive_power_b_gain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_REACTIVE_POWER_C_GAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(reactive_power_c_gain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_CURRENT_A(_show, _addr) \ - IIO_DEVICE_ATTR(current_a, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_CURRENT_B(_show, _addr) \ - IIO_DEVICE_ATTR(current_b, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_CURRENT_C(_show, _addr) \ - IIO_DEVICE_ATTR(current_c, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_VOLT_A(_show, _addr) \ - IIO_DEVICE_ATTR(volt_a, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_VOLT_B(_show, _addr) \ - IIO_DEVICE_ATTR(volt_b, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_VOLT_C(_show, _addr) \ - IIO_DEVICE_ATTR(volt_c, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_AENERGY(_show, _addr) \ - IIO_DEVICE_ATTR(aenergy, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_LENERGY(_show, _addr) \ - IIO_DEVICE_ATTR(lenergy, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_RAENERGY(_show, _addr) \ - IIO_DEVICE_ATTR(raenergy, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_LAENERGY(_show, _addr) \ - IIO_DEVICE_ATTR(laenergy, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_VAENERGY(_show, _addr) \ - IIO_DEVICE_ATTR(vaenergy, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_LVAENERGY(_show, _addr) \ - IIO_DEVICE_ATTR(lvaenergy, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_RVAENERGY(_show, _addr) \ - IIO_DEVICE_ATTR(rvaenergy, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_LVARENERGY(_show, _addr) \ - IIO_DEVICE_ATTR(lvarenergy, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_CHKSUM(_show, _addr) \ - IIO_DEVICE_ATTR(chksum, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_ANGLE0(_show, _addr) \ - IIO_DEVICE_ATTR(angle0, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_ANGLE1(_show, _addr) \ - IIO_DEVICE_ATTR(angle1, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_ANGLE2(_show, _addr) \ - IIO_DEVICE_ATTR(angle2, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_AWATTHR(_show, _addr) \ - IIO_DEVICE_ATTR(awatthr, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_BWATTHR(_show, _addr) \ - IIO_DEVICE_ATTR(bwatthr, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_CWATTHR(_show, _addr) \ - IIO_DEVICE_ATTR(cwatthr, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_AFWATTHR(_show, _addr) \ - IIO_DEVICE_ATTR(afwatthr, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_BFWATTHR(_show, _addr) \ - IIO_DEVICE_ATTR(bfwatthr, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_CFWATTHR(_show, _addr) \ - IIO_DEVICE_ATTR(cfwatthr, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_AVARHR(_show, _addr) \ - IIO_DEVICE_ATTR(avarhr, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_BVARHR(_show, _addr) \ - IIO_DEVICE_ATTR(bvarhr, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_CVARHR(_show, _addr) \ - IIO_DEVICE_ATTR(cvarhr, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_AVAHR(_show, _addr) \ - IIO_DEVICE_ATTR(avahr, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_BVAHR(_show, _addr) \ - IIO_DEVICE_ATTR(bvahr, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_CVAHR(_show, _addr) \ - IIO_DEVICE_ATTR(cvahr, 0444, _show, NULL, _addr) - -#define IIO_DEV_ATTR_IOS(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(ios, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_VOS(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(vos, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_PHCAL(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(phcal, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_APHCAL(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(aphcal, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_BPHCAL(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(bphcal, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_CPHCAL(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(cphcal, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_APOS(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(apos, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_AAPOS(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(aapos, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_BAPOS(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(bapos, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_CAPOS(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(capos, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_AVRMSGAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(avrmsgain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_BVRMSGAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(bvrmsgain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_CVRMSGAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(cvrmsgain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_AIGAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(aigain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_BIGAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(bigain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_CIGAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(cigain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_NIGAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(nigain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_AVGAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(avgain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_BVGAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(bvgain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_CVGAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(cvgain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_WGAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(wgain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_WDIV(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(wdiv, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_CFNUM(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(cfnum, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_CFDEN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(cfden, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_CF1DEN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(cf1den, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_CF2DEN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(cf2den, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_CF3DEN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(cf3den, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_IRMS(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(irms, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_VRMS(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(vrms, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_AIRMS(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(airms, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_BIRMS(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(birms, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_CIRMS(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(cirms, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_NIRMS(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(nirms, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_AVRMS(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(avrms, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_BVRMS(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(bvrms, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_CVRMS(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(cvrms, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_IRMSOS(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(irmsos, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_VRMSOS(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(vrmsos, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_AIRMSOS(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(airmsos, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_BIRMSOS(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(birmsos, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_CIRMSOS(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(cirmsos, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_AVRMSOS(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(avrmsos, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_BVRMSOS(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(bvrmsos, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_CVRMSOS(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(cvrmsos, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_VAGAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(vagain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_PGA_GAIN(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(pga_gain, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_VADIV(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(vadiv, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_LINECYC(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(linecyc, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_SAGCYC(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(sagcyc, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_CFCYC(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(cfcyc, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_PEAKCYC(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(peakcyc, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_SAGLVL(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(saglvl, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_IPKLVL(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(ipklvl, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_VPKLVL(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(vpklvl, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_IPEAK(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(ipeak, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_RIPEAK(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(ripeak, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_VPEAK(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(vpeak, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_RVPEAK(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(rvpeak, _mode, _show, _store, _addr) - -#define IIO_DEV_ATTR_VPERIOD(_mode, _show, _store, _addr) \ - IIO_DEVICE_ATTR(vperiod, _mode, _show, _store, _addr) - -/* active energy register, AENERGY, is more than half full */ -#define IIO_EVENT_ATTR_AENERGY_HALF_FULL(_evlist, _show, _store, _mask) \ - IIO_EVENT_ATTR_SH(aenergy_half_full, _evlist, _show, _store, _mask) - -/* a SAG on the line voltage */ -#define IIO_EVENT_ATTR_LINE_VOLT_SAG(_evlist, _show, _store, _mask) \ - IIO_EVENT_ATTR_SH(line_volt_sag, _evlist, _show, _store, _mask) - -/* - * Indicates the end of energy accumulation over an integer number - * of half line cycles - */ -#define IIO_EVENT_ATTR_CYCEND(_evlist, _show, _store, _mask) \ - IIO_EVENT_ATTR_SH(cycend, _evlist, _show, _store, _mask) - -/* on the rising and falling edge of the voltage waveform */ -#define IIO_EVENT_ATTR_ZERO_CROSS(_evlist, _show, _store, _mask) \ - IIO_EVENT_ATTR_SH(zero_cross, _evlist, _show, _store, _mask) - -/* the active energy register has overflowed */ -#define IIO_EVENT_ATTR_AENERGY_OVERFLOW(_evlist, _show, _store, _mask) \ - IIO_EVENT_ATTR_SH(aenergy_overflow, _evlist, _show, _store, _mask) - -/* the apparent energy register has overflowed */ -#define IIO_EVENT_ATTR_VAENERGY_OVERFLOW(_evlist, _show, _store, _mask) \ - IIO_EVENT_ATTR_SH(vaenergy_overflow, _evlist, _show, _store, _mask) - -/* the active energy register, VAENERGY, is more than half full */ -#define IIO_EVENT_ATTR_VAENERGY_HALF_FULL(_evlist, _show, _store, _mask) \ - IIO_EVENT_ATTR_SH(vaenergy_half_full, _evlist, _show, _store, _mask) - -/* the power has gone from negative to positive */ -#define IIO_EVENT_ATTR_PPOS(_evlist, _show, _store, _mask) \ - IIO_EVENT_ATTR_SH(ppos, _evlist, _show, _store, _mask) - -/* the power has gone from positive to negative */ -#define IIO_EVENT_ATTR_PNEG(_evlist, _show, _store, _mask) \ - IIO_EVENT_ATTR_SH(pneg, _evlist, _show, _store, _mask) - -/* waveform sample from Channel 1 has exceeded the IPKLVL value */ -#define IIO_EVENT_ATTR_IPKLVL_EXC(_evlist, _show, _store, _mask) \ - IIO_EVENT_ATTR_SH(ipklvl_exc, _evlist, _show, _store, _mask) - -/* waveform sample from Channel 2 has exceeded the VPKLVL value */ -#define IIO_EVENT_ATTR_VPKLVL_EXC(_evlist, _show, _store, _mask) \ - IIO_EVENT_ATTR_SH(vpklvl_exc, _evlist, _show, _store, _mask) - -#endif /* _METER_H */ diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index 84caac32f0fd..341abaed4ce2 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -301,6 +301,15 @@ config GOLDFISH_TTY_EARLY_CONSOLE default y if GOLDFISH_TTY=y select SERIAL_EARLYCON +config IPWIRELESS + tristate "IPWireless 3G UMTS PCMCIA card support" + depends on PCMCIA && NETDEVICES + select PPP + help + This is a driver for 3G UMTS PCMCIA card from IPWireless company. In + some countries (for example Czech Republic, T-Mobile ISP) this card + is shipped for service called UMTS 4G. + config N_GSM tristate "GSM MUX line discipline support (EXPERIMENTAL)" depends on NET diff --git a/drivers/usb/common/ulpi.c b/drivers/usb/common/ulpi.c index 8305a5dfb910..84d91b1c1eed 100644 --- a/drivers/usb/common/ulpi.c +++ b/drivers/usb/common/ulpi.c @@ -229,7 +229,7 @@ static int ulpi_read_id(struct ulpi *ulpi) request_module("ulpi:v%04xp%04x", ulpi->id.vendor, ulpi->id.product); return 0; err: - of_device_request_module(&ulpi->dev); + of_request_module(ulpi->dev.of_node); return 0; } diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig index 692cac3ff0ee..ad316573288a 100644 --- a/drivers/w1/masters/Kconfig +++ b/drivers/w1/masters/Kconfig @@ -53,7 +53,7 @@ config W1_MASTER_GPIO config HDQ_MASTER_OMAP tristate "OMAP HDQ driver" - depends on ARCH_OMAP + depends on ARCH_OMAP || COMPILE_TEST help Say Y here if you want support for the 1-wire or HDQ Interface on an OMAP processor. diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c index 3d8b51316bef..c1de8a92e144 100644 --- a/drivers/w1/masters/ds2482.c +++ b/drivers/w1/masters/ds2482.c @@ -15,7 +15,6 @@ #include <linux/slab.h> #include <linux/i2c.h> #include <linux/delay.h> -#include <asm/delay.h> #include <linux/w1.h> @@ -36,7 +35,7 @@ MODULE_PARM_DESC(active_pullup, "Active pullup (apply to all buses): " \ /* extra configurations - e.g. 1WS */ static int extra_config; -module_param(extra_config, int, S_IRUGO | S_IWUSR); +module_param(extra_config, int, 0644); MODULE_PARM_DESC(extra_config, "Extra Configuration settings 1=APU,2=PPM,3=SPU,8=1WS"); /* @@ -78,10 +77,8 @@ MODULE_PARM_DESC(extra_config, "Extra Configuration settings 1=APU,2=PPM,3=SPU,8 * To set the channel, write the value at the index of the channel. * Read and compare against the corresponding value to verify the change. */ -static const u8 ds2482_chan_wr[8] = - { 0xF0, 0xE1, 0xD2, 0xC3, 0xB4, 0xA5, 0x96, 0x87 }; -static const u8 ds2482_chan_rd[8] = - { 0xB8, 0xB1, 0xAA, 0xA3, 0x9C, 0x95, 0x8E, 0x87 }; +static const u8 ds2482_chan_wr[8] = { 0xF0, 0xE1, 0xD2, 0xC3, 0xB4, 0xA5, 0x96, 0x87 }; +static const u8 ds2482_chan_rd[8] = { 0xB8, 0xB1, 0xAA, 0xA3, 0x9C, 0x95, 0x8E, 0x87 }; /* @@ -454,7 +451,8 @@ static int ds2482_probe(struct i2c_client *client) I2C_FUNC_SMBUS_BYTE)) return -ENODEV; - if (!(data = kzalloc(sizeof(struct ds2482_data), GFP_KERNEL))) { + data = kzalloc(sizeof(struct ds2482_data), GFP_KERNEL); + if (!data) { err = -ENOMEM; goto exit; } @@ -544,6 +542,7 @@ static void ds2482_remove(struct i2c_client *client) */ static const struct i2c_device_id ds2482_id[] = { { "ds2482", 0 }, + { "ds2484", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, ds2482_id); diff --git a/drivers/w1/masters/ds2490.c b/drivers/w1/masters/ds2490.c index 0eb560fc0153..5f5b97e24700 100644 --- a/drivers/w1/masters/ds2490.c +++ b/drivers/w1/masters/ds2490.c @@ -304,6 +304,7 @@ static void ds_reset_device(struct ds_device *dev) if (dev->spu_sleep) { /* lower 4 bits are 0, see ds_set_pullup */ u8 del = dev->spu_sleep>>4; + if (ds_send_control(dev, COMM_SET_DURATION | COMM_IM, del)) dev_err(&dev->udev->dev, "%s: Error setting duration\n", __func__); @@ -731,7 +732,8 @@ static void ds9490r_search(void *data, struct w1_master *master, break; if (st.data_in_buffer_status) { - /* Bulk in can receive partial ids, but when it does + /* + * Bulk in can receive partial ids, but when it does * they fail crc and will be discarded anyway. * That has only been seen when status in buffer * is 0 and bulk is read anyway, so don't read @@ -743,8 +745,10 @@ static void ds9490r_search(void *data, struct w1_master *master, break; for (i = 0; i < err/8; ++i) { found_ids[found++] = buf[i]; - /* can't know if there will be a discrepancy - * value after until the next id */ + /* + * can't know if there will be a discrepancy + * value after until the next id + */ if (found == search_limit) { master->search_id = buf[i]; break; @@ -760,7 +764,8 @@ static void ds9490r_search(void *data, struct w1_master *master, if (found <= search_limit) { master->search_id = 0; } else if (!test_bit(W1_WARN_MAX_COUNT, &master->flags)) { - /* Only max_slave_count will be scanned in a search, + /* + * Only max_slave_count will be scanned in a search, * but it will start where it left off next search * until all ids are identified and then it will start * over. A continued search will report the previous diff --git a/drivers/w1/masters/matrox_w1.c b/drivers/w1/masters/matrox_w1.c index ee716c715710..2852cd2dc67c 100644 --- a/drivers/w1/masters/matrox_w1.c +++ b/drivers/w1/masters/matrox_w1.c @@ -7,7 +7,7 @@ #include <asm/types.h> #include <linux/atomic.h> -#include <asm/io.h> +#include <linux/io.h> #include <linux/delay.h> #include <linux/kernel.h> @@ -39,8 +39,7 @@ #define MATROX_GET_DATA 0x2B #define MATROX_CURSOR_CTL 0x06 -struct matrox_device -{ +struct matrox_device { void __iomem *base_addr; void __iomem *port_index; void __iomem *port_data; @@ -64,7 +63,7 @@ struct matrox_device * * Port mapping. */ -static __inline__ u8 matrox_w1_read_reg(struct matrox_device *dev, u8 reg) +static inline u8 matrox_w1_read_reg(struct matrox_device *dev, u8 reg) { u8 ret; @@ -75,7 +74,7 @@ static __inline__ u8 matrox_w1_read_reg(struct matrox_device *dev, u8 reg) return ret; } -static __inline__ void matrox_w1_write_reg(struct matrox_device *dev, u8 reg, u8 val) +static inline void matrox_w1_write_reg(struct matrox_device *dev, u8 reg, u8 val) { writeb(reg, dev->port_index); writeb(val, dev->port_data); @@ -123,13 +122,8 @@ static int matrox_w1_probe(struct pci_dev *pdev, const struct pci_device_id *ent dev = kzalloc(sizeof(struct matrox_device) + sizeof(struct w1_bus_master), GFP_KERNEL); - if (!dev) { - dev_err(&pdev->dev, - "%s: Failed to create new matrox_device object.\n", - __func__); + if (!dev) return -ENOMEM; - } - dev->bus_master = (struct w1_bus_master *)(dev + 1); diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c index bf2ec59c1f9d..6a39b71eb718 100644 --- a/drivers/w1/masters/omap_hdq.c +++ b/drivers/w1/masters/omap_hdq.c @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * drivers/w1/masters/omap_hdq.c - * * Copyright (C) 2007,2012 Texas Instruments, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - * */ #include <linux/kernel.h> #include <linux/module.h> @@ -48,7 +42,7 @@ static DECLARE_WAIT_QUEUE_HEAD(hdq_wait_queue); static int w1_id; -module_param(w1_id, int, S_IRUSR); +module_param(w1_id, int, 0400); MODULE_PARM_DESC(w1_id, "1-wire id for the slave detection in HDQ mode"); struct hdq_data { @@ -579,10 +573,8 @@ static int omap_hdq_probe(struct platform_device *pdev) const char *mode; hdq_data = devm_kzalloc(dev, sizeof(*hdq_data), GFP_KERNEL); - if (!hdq_data) { - dev_dbg(&pdev->dev, "unable to allocate memory\n"); + if (!hdq_data) return -ENOMEM; - } hdq_data->dev = dev; platform_set_drvdata(pdev, hdq_data); diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c index 530c77b8d062..e45acb6d916e 100644 --- a/drivers/w1/masters/w1-gpio.c +++ b/drivers/w1/masters/w1-gpio.c @@ -101,10 +101,8 @@ static int w1_gpio_probe(struct platform_device *pdev) master = devm_kzalloc(dev, sizeof(struct w1_bus_master), GFP_KERNEL); - if (!master) { - dev_err(dev, "Out of memory\n"); + if (!master) return -ENOMEM; - } pdata->gpiod = devm_gpiod_get_index(dev, NULL, 0, gflags); if (IS_ERR(pdata->gpiod)) { diff --git a/drivers/w1/slaves/w1_ds2406.c b/drivers/w1/slaves/w1_ds2406.c index 6c269af73c80..2f5926859b8b 100644 --- a/drivers/w1/slaves/w1_ds2406.c +++ b/drivers/w1/slaves/w1_ds2406.c @@ -27,11 +27,11 @@ static ssize_t w1_f12_read_state( struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { - u8 w1_buf[6]={W1_F12_FUNC_READ_STATUS, 7, 0, 0, 0, 0}; + u8 w1_buf[6] = {W1_F12_FUNC_READ_STATUS, 7, 0, 0, 0, 0}; struct w1_slave *sl = kobj_to_w1_slave(kobj); - u16 crc=0; + u16 crc = 0; int i; - ssize_t rtnval=1; + ssize_t rtnval = 1; if (off != 0) return 0; @@ -47,12 +47,12 @@ static ssize_t w1_f12_read_state( w1_write_block(sl->master, w1_buf, 3); w1_read_block(sl->master, w1_buf+3, 3); - for (i=0; i<6; i++) - crc=crc16_byte(crc, w1_buf[i]); - if (crc==0xb001) /* good read? */ - *buf=((w1_buf[3]>>5)&3)|0x30; + for (i = 0; i < 6; i++) + crc = crc16_byte(crc, w1_buf[i]); + if (crc == 0xb001) /* good read? */ + *buf = ((w1_buf[3]>>5)&3)|0x30; else - rtnval=-EIO; + rtnval = -EIO; mutex_unlock(&sl->master->bus_mutex); @@ -65,10 +65,10 @@ static ssize_t w1_f12_write_output( char *buf, loff_t off, size_t count) { struct w1_slave *sl = kobj_to_w1_slave(kobj); - u8 w1_buf[6]={W1_F12_FUNC_WRITE_STATUS, 7, 0, 0, 0, 0}; - u16 crc=0; + u8 w1_buf[6] = {W1_F12_FUNC_WRITE_STATUS, 7, 0, 0, 0, 0}; + u16 crc = 0; int i; - ssize_t rtnval=1; + ssize_t rtnval = 1; if (count != 1 || off != 0) return -EFAULT; @@ -83,12 +83,12 @@ static ssize_t w1_f12_write_output( w1_buf[3] = (((*buf)&3)<<5)|0x1F; w1_write_block(sl->master, w1_buf, 4); w1_read_block(sl->master, w1_buf+4, 2); - for (i=0; i<6; i++) - crc=crc16_byte(crc, w1_buf[i]); - if (crc==0xb001) /* good read? */ + for (i = 0; i < 6; i++) + crc = crc16_byte(crc, w1_buf[i]); + if (crc == 0xb001) /* good read? */ w1_write_8(sl->master, 0xFF); else - rtnval=-EIO; + rtnval = -EIO; mutex_unlock(&sl->master->bus_mutex); return rtnval; @@ -99,7 +99,7 @@ static struct bin_attribute w1_f12_sysfs_bin_files[NB_SYSFS_BIN_FILES] = { { .attr = { .name = "state", - .mode = S_IRUGO, + .mode = 0444, }, .size = 1, .read = w1_f12_read_state, @@ -107,7 +107,7 @@ static struct bin_attribute w1_f12_sysfs_bin_files[NB_SYSFS_BIN_FILES] = { { .attr = { .name = "output", - .mode = S_IRUGO | S_IWUSR | S_IWGRP, + .mode = 0664, }, .size = 1, .write = w1_f12_write_output, @@ -133,6 +133,7 @@ static int w1_f12_add_slave(struct w1_slave *sl) static void w1_f12_remove_slave(struct w1_slave *sl) { int i; + for (i = NB_SYSFS_BIN_FILES - 1; i >= 0; --i) sysfs_remove_bin_file(&sl->dev.kobj, &(w1_f12_sysfs_bin_files[i])); diff --git a/drivers/w1/slaves/w1_ds2408.c b/drivers/w1/slaves/w1_ds2408.c index ad102c577122..56f822a1dfdb 100644 --- a/drivers/w1/slaves/w1_ds2408.c +++ b/drivers/w1/slaves/w1_ds2408.c @@ -35,12 +35,12 @@ #define W1_F29_SUCCESS_CONFIRM_BYTE 0xAA -static int _read_reg(struct w1_slave *sl, u8 address, unsigned char* buf) +static int _read_reg(struct w1_slave *sl, u8 address, unsigned char *buf) { u8 wrbuf[3]; - dev_dbg(&sl->dev, - "Reading with slave: %p, reg addr: %0#4x, buff addr: %p", - sl, (unsigned int)address, buf); + + dev_dbg(&sl->dev, "Reading with slave: %p, reg addr: %0#4x, buff addr: %p", + sl, (unsigned int)address, buf); if (!buf) return -EINVAL; @@ -206,7 +206,7 @@ out: } -/** +/* * Writing to the activity file resets the activity latches. */ static ssize_t activity_write(struct file *filp, struct kobject *kobj, @@ -292,7 +292,7 @@ static int w1_f29_disable_test_mode(struct w1_slave *sl) { int res; u8 magic[10] = {0x96, }; - u64 rn = le64_to_cpu(*((u64*)&sl->reg_num)); + u64 rn = le64_to_cpu(*((u64 *)&sl->reg_num)); memcpy(&magic[1], &rn, 8); magic[9] = 0x3C; diff --git a/drivers/w1/slaves/w1_ds2413.c b/drivers/w1/slaves/w1_ds2413.c index c8cfac555b48..739009806467 100644 --- a/drivers/w1/slaves/w1_ds2413.c +++ b/drivers/w1/slaves/w1_ds2413.c @@ -99,8 +99,10 @@ static ssize_t output_write(struct file *filp, struct kobject *kobj, if (w1_reset_select_slave(sl)) goto out; - /* according to the DS2413 datasheet the most significant 6 bits - should be set to "1"s, so do it now */ + /* + * according to the DS2413 datasheet the most significant 6 bits + * should be set to "1"s, so do it now + */ *buf = *buf | 0xFC; while (retries--) { @@ -126,7 +128,7 @@ out: return bytes_written; } -static BIN_ATTR(output, S_IRUGO | S_IWUSR | S_IWGRP, NULL, output_write, 1); +static BIN_ATTR(output, 0664, NULL, output_write, 1); static struct bin_attribute *w1_f3a_bin_attrs[] = { &bin_attr_state, diff --git a/drivers/w1/slaves/w1_ds2433.c b/drivers/w1/slaves/w1_ds2433.c index 0f72df15a024..9f21fd98f799 100644 --- a/drivers/w1/slaves/w1_ds2433.c +++ b/drivers/w1/slaves/w1_ds2433.c @@ -42,7 +42,7 @@ struct w1_f23_data { u32 validcrc; }; -/** +/* * Check the file size bounds and adjusts count as needed. * This would not be needed if the file size didn't reset to 0 after a write. */ @@ -98,7 +98,8 @@ static ssize_t eeprom_read(struct file *filp, struct kobject *kobj, u8 wrbuf[3]; #endif - if ((count = w1_f23_fix_count(off, count, W1_EEPROM_SIZE)) == 0) + count = w1_f23_fix_count(off, count, W1_EEPROM_SIZE); + if (!count) return 0; mutex_lock(&sl->master->bus_mutex); @@ -115,7 +116,7 @@ static ssize_t eeprom_read(struct file *filp, struct kobject *kobj, } memcpy(buf, &data->memory[off], count); -#else /* CONFIG_W1_SLAVE_DS2433_CRC */ +#else /* CONFIG_W1_SLAVE_DS2433_CRC */ /* read directly from the EEPROM */ if (w1_reset_select_slave(sl)) { @@ -138,16 +139,17 @@ out_up: } /** - * Writes to the scratchpad and reads it back for verification. + * w1_f23_write() - Writes to the scratchpad and reads it back for verification. + * @sl: The slave structure + * @addr: Address for the write + * @len: length must be <= (W1_PAGE_SIZE - (addr & W1_PAGE_MASK)) + * @data: The data to write + * * Then copies the scratchpad to EEPROM. * The data must be on one page. * The master must be locked. * - * @param sl The slave structure - * @param addr Address for the write - * @param len length must be <= (W1_PAGE_SIZE - (addr & W1_PAGE_MASK)) - * @param data The data to write - * @return 0=Success -1=failure + * Return: 0=Success, -1=failure */ static int w1_f23_write(struct w1_slave *sl, int addr, int len, const u8 *data) { @@ -207,7 +209,8 @@ static ssize_t eeprom_write(struct file *filp, struct kobject *kobj, struct w1_slave *sl = kobj_to_w1_slave(kobj); int addr, len, idx; - if ((count = w1_f23_fix_count(off, count, W1_EEPROM_SIZE)) == 0) + count = w1_f23_fix_count(off, count, W1_EEPROM_SIZE); + if (!count) return 0; #ifdef CONFIG_W1_SLAVE_DS2433_CRC diff --git a/drivers/w1/slaves/w1_ds2780.c b/drivers/w1/slaves/w1_ds2780.c index 9dcb5a54f7fc..3cde1bb1886b 100644 --- a/drivers/w1/slaves/w1_ds2780.c +++ b/drivers/w1/slaves/w1_ds2780.c @@ -91,6 +91,7 @@ static ssize_t w1_slave_read(struct file *filp, struct kobject *kobj, loff_t off, size_t count) { struct device *dev = kobj_to_dev(kobj); + return w1_ds2780_io(dev, buf, off, count, 0); } diff --git a/drivers/w1/slaves/w1_ds2781.c b/drivers/w1/slaves/w1_ds2781.c index 2cb7c020b607..e418484b4a49 100644 --- a/drivers/w1/slaves/w1_ds2781.c +++ b/drivers/w1/slaves/w1_ds2781.c @@ -88,6 +88,7 @@ static ssize_t w1_slave_read(struct file *filp, struct kobject *kobj, loff_t off, size_t count) { struct device *dev = kobj_to_dev(kobj); + return w1_ds2781_io(dev, buf, off, count, 0); } diff --git a/drivers/w1/slaves/w1_ds2805.c b/drivers/w1/slaves/w1_ds2805.c index 6b5d12ba1b65..4c1a2c515317 100644 --- a/drivers/w1/slaves/w1_ds2805.c +++ b/drivers/w1/slaves/w1_ds2805.c @@ -264,7 +264,7 @@ out_up: static struct bin_attribute w1_f0d_bin_attr = { .attr = { .name = "eeprom", - .mode = S_IRUGO | S_IWUSR, + .mode = 0644, }, .size = W1_F0D_EEPROM_SIZE, .read = w1_f0d_read_bin, diff --git a/drivers/w1/slaves/w1_ds28e04.c b/drivers/w1/slaves/w1_ds28e04.c index 6cef6e2edb89..2854b8b9e93f 100644 --- a/drivers/w1/slaves/w1_ds28e04.c +++ b/drivers/w1/slaves/w1_ds28e04.c @@ -53,7 +53,7 @@ struct w1_f1C_data { u32 validcrc; }; -/** +/* * Check the file size bounds and adjusts count as needed. * This would not be needed if the file size didn't reset to 0 after a write. */ @@ -146,16 +146,17 @@ out_up: } /** - * Writes to the scratchpad and reads it back for verification. + * w1_f1C_write() - Writes to the scratchpad and reads it back for verification. + * @sl: The slave structure + * @addr: Address for the write + * @len: length must be <= (W1_PAGE_SIZE - (addr & W1_PAGE_MASK)) + * @data: The data to write + * * Then copies the scratchpad to EEPROM. * The data must be on one page. * The master must be locked. * - * @param sl The slave structure - * @param addr Address for the write - * @param len length must be <= (W1_PAGE_SIZE - (addr & W1_PAGE_MASK)) - * @param data The data to write - * @return 0=Success -1=failure + * Return: 0=Success, -1=failure */ static int w1_f1C_write(struct w1_slave *sl, int addr, int len, const u8 *data) { @@ -197,8 +198,10 @@ static int w1_f1C_write(struct w1_slave *sl, int addr, int len, const u8 *data) wrbuf[3] = es; for (i = 0; i < sizeof(wrbuf); ++i) { - /* issue 10ms strong pullup (or delay) on the last byte - for writing the data from the scratchpad to EEPROM */ + /* + * issue 10ms strong pullup (or delay) on the last byte + * for writing the data from the scratchpad to EEPROM + */ if (w1_strong_pullup && i == sizeof(wrbuf)-1) w1_next_pullup(sl->master, tm); diff --git a/drivers/w1/slaves/w1_ds28e17.c b/drivers/w1/slaves/w1_ds28e17.c index aed10b72fc99..52261b54d842 100644 --- a/drivers/w1/slaves/w1_ds28e17.c +++ b/drivers/w1/slaves/w1_ds28e17.c @@ -31,12 +31,12 @@ MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS28E17)); /* Default I2C speed to be set when a DS28E17 is detected. */ static int i2c_speed = 100; -module_param_named(speed, i2c_speed, int, (S_IRUSR | S_IWUSR)); +module_param_named(speed, i2c_speed, int, 0600); MODULE_PARM_DESC(speed, "Default I2C speed to be set when a DS28E17 is detected"); /* Default I2C stretch value to be set when a DS28E17 is detected. */ static char i2c_stretch = 1; -module_param_named(stretch, i2c_stretch, byte, (S_IRUSR | S_IWUSR)); +module_param_named(stretch, i2c_stretch, byte, 0600); MODULE_PARM_DESC(stretch, "Default I2C stretch value to be set when a DS28E17 is detected"); /* DS28E17 device command codes. */ @@ -59,7 +59,7 @@ MODULE_PARM_DESC(stretch, "Default I2C stretch value to be set when a DS28E17 is /* * Maximum number of I2C bytes to transfer within one CRC16 protected onewire * command. - * */ + */ #define W1_F19_WRITE_DATA_LIMIT 255 /* Maximum number of I2C bytes to read with one onewire command. */ diff --git a/include/linux/alcor_pci.h b/include/linux/alcor_pci.h index 8274ed525e9f..c4a0b23846d8 100644 --- a/include/linux/alcor_pci.h +++ b/include/linux/alcor_pci.h @@ -268,13 +268,6 @@ struct alcor_pci_priv { unsigned long id; /* idr id */ struct alcor_dev_cfg *cfg; - - /* PCI ASPM related vars */ - int pdev_cap_off; - u8 pdev_aspm_cap; - int parent_cap_off; - u8 parent_aspm_cap; - u8 ext_config_dev_aspm; }; void alcor_write8(struct alcor_pci_priv *priv, u8 val, unsigned int addr); diff --git a/include/linux/cdx/cdx_bus.h b/include/linux/cdx/cdx_bus.h new file mode 100644 index 000000000000..35ef41d8a61a --- /dev/null +++ b/include/linux/cdx/cdx_bus.h @@ -0,0 +1,174 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * CDX bus public interface + * + * Copyright (C) 2022-2023, Advanced Micro Devices, Inc. + * + */ + +#ifndef _CDX_BUS_H_ +#define _CDX_BUS_H_ + +#include <linux/device.h> +#include <linux/list.h> +#include <linux/mod_devicetable.h> + +#define MAX_CDX_DEV_RESOURCES 4 +#define CDX_ANY_ID (0xFFFF) +#define CDX_CONTROLLER_ID_SHIFT 4 +#define CDX_BUS_NUM_MASK 0xF + +/* Forward declaration for CDX controller */ +struct cdx_controller; + +enum { + CDX_DEV_RESET_CONF, +}; + +struct cdx_device_config { + u8 type; +}; + +typedef int (*cdx_scan_cb)(struct cdx_controller *cdx); + +typedef int (*cdx_dev_configure_cb)(struct cdx_controller *cdx, + u8 bus_num, u8 dev_num, + struct cdx_device_config *dev_config); + +/** + * CDX_DEVICE_DRIVER_OVERRIDE - macro used to describe a CDX device with + * override_only flags. + * @vend: the 16 bit CDX Vendor ID + * @dev: the 16 bit CDX Device ID + * @driver_override: the 32 bit CDX Device override_only + * + * This macro is used to create a struct cdx_device_id that matches only a + * driver_override device. + */ +#define CDX_DEVICE_DRIVER_OVERRIDE(vend, dev, driver_override) \ + .vendor = (vend), .device = (dev), .override_only = (driver_override) + +/** + * struct cdx_ops - Callbacks supported by CDX controller. + * @scan: scan the devices on the controller + * @dev_configure: configuration like reset, master_enable, + * msi_config etc for a CDX device + */ +struct cdx_ops { + cdx_scan_cb scan; + cdx_dev_configure_cb dev_configure; +}; + +/** + * struct cdx_controller: CDX controller object + * @dev: Linux device associated with the CDX controller. + * @priv: private data + * @id: Controller ID + * @ops: CDX controller ops + */ +struct cdx_controller { + struct device *dev; + void *priv; + u32 id; + struct cdx_ops *ops; +}; + +/** + * struct cdx_device - CDX device object + * @dev: Linux driver model device object + * @cdx: CDX controller associated with the device + * @vendor: Vendor ID for CDX device + * @device: Device ID for CDX device + * @bus_num: Bus number for this CDX device + * @dev_num: Device number for this device + * @res: array of MMIO region entries + * @res_attr: resource binary attribute + * @res_count: number of valid MMIO regions + * @dma_mask: Default DMA mask + * @flags: CDX device flags + * @req_id: Requestor ID associated with CDX device + * @driver_override: driver name to force a match; do not set directly, + * because core frees it; use driver_set_override() to + * set or clear it. + */ +struct cdx_device { + struct device dev; + struct cdx_controller *cdx; + u16 vendor; + u16 device; + u8 bus_num; + u8 dev_num; + struct resource res[MAX_CDX_DEV_RESOURCES]; + u8 res_count; + u64 dma_mask; + u16 flags; + u32 req_id; + const char *driver_override; +}; + +#define to_cdx_device(_dev) \ + container_of(_dev, struct cdx_device, dev) + +/** + * struct cdx_driver - CDX device driver + * @driver: Generic device driver + * @match_id_table: table of supported device matching Ids + * @probe: Function called when a device is added + * @remove: Function called when a device is removed + * @shutdown: Function called at shutdown time to quiesce the device + * @reset_prepare: Function called before is reset to notify driver + * @reset_done: Function called after reset is complete to notify driver + * @driver_managed_dma: Device driver doesn't use kernel DMA API for DMA. + * For most device drivers, no need to care about this flag + * as long as all DMAs are handled through the kernel DMA API. + * For some special ones, for example VFIO drivers, they know + * how to manage the DMA themselves and set this flag so that + * the IOMMU layer will allow them to setup and manage their + * own I/O address space. + */ +struct cdx_driver { + struct device_driver driver; + const struct cdx_device_id *match_id_table; + int (*probe)(struct cdx_device *dev); + int (*remove)(struct cdx_device *dev); + void (*shutdown)(struct cdx_device *dev); + void (*reset_prepare)(struct cdx_device *dev); + void (*reset_done)(struct cdx_device *dev); + bool driver_managed_dma; +}; + +#define to_cdx_driver(_drv) \ + container_of(_drv, struct cdx_driver, driver) + +/* Macro to avoid include chaining to get THIS_MODULE */ +#define cdx_driver_register(drv) \ + __cdx_driver_register(drv, THIS_MODULE) + +/** + * __cdx_driver_register - registers a CDX device driver + * @cdx_driver: CDX driver to register + * @owner: module owner + * + * Return: -errno on failure, 0 on success. + */ +int __must_check __cdx_driver_register(struct cdx_driver *cdx_driver, + struct module *owner); + +/** + * cdx_driver_unregister - unregisters a device driver from the + * CDX bus. + * @cdx_driver: CDX driver to register + */ +void cdx_driver_unregister(struct cdx_driver *cdx_driver); + +extern struct bus_type cdx_bus_type; + +/** + * cdx_dev_reset - Reset CDX device + * @dev: device pointer + * + * Return: 0 for success, -errno on failure + */ +int cdx_dev_reset(struct device *dev); + +#endif /* _CDX_BUS_H_ */ diff --git a/include/linux/cm4000_cs.h b/include/linux/cm4000_cs.h deleted file mode 100644 index ea4958e07a14..000000000000 --- a/include/linux/cm4000_cs.h +++ /dev/null @@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _CM4000_H_ -#define _CM4000_H_ - -#include <uapi/linux/cm4000_cs.h> - - -#define DEVICE_NAME "cmm" -#define MODULE_NAME "cm4000_cs" - -#endif /* _CM4000_H_ */ diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h index 0e4c70987e6a..f5da51677069 100644 --- a/include/linux/firmware/xlnx-zynqmp.h +++ b/include/linux/firmware/xlnx-zynqmp.h @@ -71,6 +71,10 @@ #define XILINX_ZYNQMP_PM_FPGA_FULL 0x0U #define XILINX_ZYNQMP_PM_FPGA_PARTIAL BIT(0) +/* FPGA Status Reg */ +#define XILINX_ZYNQMP_PM_FPGA_CONFIG_STAT_OFFSET 7U +#define XILINX_ZYNQMP_PM_FPGA_READ_CONFIG_REG 0U + /* * Node IDs for the Error Events. */ @@ -124,6 +128,7 @@ enum pm_api_id { PM_CLOCK_GETRATE = 42, PM_CLOCK_SETPARENT = 43, PM_CLOCK_GETPARENT = 44, + PM_FPGA_READ = 46, PM_SECURE_AES = 47, PM_FEATURE_CHECK = 63, }; @@ -519,6 +524,7 @@ int zynqmp_pm_aes_engine(const u64 address, u32 *out); int zynqmp_pm_sha_hash(const u64 address, const u32 size, const u32 flags); int zynqmp_pm_fpga_load(const u64 address, const u32 size, const u32 flags); int zynqmp_pm_fpga_get_status(u32 *value); +int zynqmp_pm_fpga_get_config_status(u32 *value); int zynqmp_pm_write_ggs(u32 index, u32 value); int zynqmp_pm_read_ggs(u32 index, u32 *value); int zynqmp_pm_write_pggs(u32 index, u32 value); @@ -725,6 +731,11 @@ static inline int zynqmp_pm_fpga_get_status(u32 *value) return -ENODEV; } +static inline int zynqmp_pm_fpga_get_config_status(u32 *value) +{ + return -ENODEV; +} + static inline int zynqmp_pm_write_ggs(u32 index, u32 value) { return -ENODEV; diff --git a/include/linux/iio/iio-gts-helper.h b/include/linux/iio/iio-gts-helper.h new file mode 100644 index 000000000000..dd64e544a3da --- /dev/null +++ b/include/linux/iio/iio-gts-helper.h @@ -0,0 +1,206 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* gain-time-scale conversion helpers for IIO light sensors + * + * Copyright (c) 2023 Matti Vaittinen <mazziesaccount@gmail.com> + */ + +#ifndef __IIO_GTS_HELPER__ +#define __IIO_GTS_HELPER__ + +#include <linux/types.h> + +struct device; + +/** + * struct iio_gain_sel_pair - gain - selector values + * + * In many cases devices like light sensors allow setting signal amplification + * (gain) using a register interface. This structure describes amplification + * and corresponding selector (register value) + * + * @gain: Gain (multiplication) value. Gain must be positive, negative + * values are reserved for error handling. + * @sel: Selector (usually register value) used to indicate this gain. + * NOTE: Only selectors >= 0 supported. + */ +struct iio_gain_sel_pair { + int gain; + int sel; +}; + +/** + * struct iio_itime_sel_mul - integration time description + * + * In many cases devices like light sensors allow setting the duration of + * collecting data. Typically this duration has also an impact to the magnitude + * of measured values (gain). This structure describes the relation of + * integration time and amplification as well as corresponding selector + * (register value). + * + * An example could be a sensor allowing 50, 100, 200 and 400 mS times. The + * respective multiplication values could be 50 mS => 1, 100 mS => 2, + * 200 mS => 4 and 400 mS => 8 assuming the impact of integration time would be + * linear in a way that when collecting data for 50 mS caused value X, doubling + * the data collection time caused value 2X etc. + * + * @time_us: Integration time in microseconds. Time values must be positive, + * negative values are reserved for error handling. + * @sel: Selector (usually register value) used to indicate this time + * NOTE: Only selectors >= 0 supported. + * @mul: Multiplication to the values caused by this time. + * NOTE: Only multipliers > 0 supported. + */ +struct iio_itime_sel_mul { + int time_us; + int sel; + int mul; +}; + +struct iio_gts { + u64 max_scale; + const struct iio_gain_sel_pair *hwgain_table; + int num_hwgain; + const struct iio_itime_sel_mul *itime_table; + int num_itime; + int **per_time_avail_scale_tables; + int *avail_all_scales_table; + int num_avail_all_scales; + int *avail_time_tables; + int num_avail_time_tables; +}; + +#define GAIN_SCALE_GAIN(_gain, _sel) \ +{ \ + .gain = (_gain), \ + .sel = (_sel), \ +} + +#define GAIN_SCALE_ITIME_US(_itime, _sel, _mul) \ +{ \ + .time_us = (_itime), \ + .sel = (_sel), \ + .mul = (_mul), \ +} + +static inline const struct iio_itime_sel_mul * +iio_gts_find_itime_by_time(struct iio_gts *gts, int time) +{ + int i; + + if (!gts->num_itime) + return NULL; + + for (i = 0; i < gts->num_itime; i++) + if (gts->itime_table[i].time_us == time) + return >s->itime_table[i]; + + return NULL; +} + +static inline const struct iio_itime_sel_mul * +iio_gts_find_itime_by_sel(struct iio_gts *gts, int sel) +{ + int i; + + for (i = 0; i < gts->num_itime; i++) + if (gts->itime_table[i].sel == sel) + return >s->itime_table[i]; + + return NULL; +} + +int devm_iio_init_iio_gts(struct device *dev, int max_scale_int, int max_scale_nano, + const struct iio_gain_sel_pair *gain_tbl, int num_gain, + const struct iio_itime_sel_mul *tim_tbl, int num_times, + struct iio_gts *gts); +/** + * iio_gts_find_int_time_by_sel - find integration time matching a selector + * @gts: Gain time scale descriptor + * @sel: selector for which matching integration time is searched for + * + * Return: integration time matching given selector or -EINVAL if + * integration time was not found. + */ +static inline int iio_gts_find_int_time_by_sel(struct iio_gts *gts, int sel) +{ + const struct iio_itime_sel_mul *itime; + + itime = iio_gts_find_itime_by_sel(gts, sel); + if (!itime) + return -EINVAL; + + return itime->time_us; +} + +/** + * iio_gts_find_sel_by_int_time - find selector matching integration time + * @gts: Gain time scale descriptor + * @gain: HW-gain for which matching selector is searched for + * + * Return: a selector matching given integration time or -EINVAL if + * selector was not found. + */ +static inline int iio_gts_find_sel_by_int_time(struct iio_gts *gts, int time) +{ + const struct iio_itime_sel_mul *itime; + + itime = iio_gts_find_itime_by_time(gts, time); + if (!itime) + return -EINVAL; + + return itime->sel; +} + +/** + * iio_gts_valid_time - check if given integration time is valid + * @gts: Gain time scale descriptor + * @time_us: Integration time to check + * + * Return: True if given time is supported by device. False if not. + */ +static inline bool iio_gts_valid_time(struct iio_gts *gts, int time_us) +{ + return iio_gts_find_itime_by_time(gts, time_us) != NULL; +} + +int iio_gts_find_sel_by_gain(struct iio_gts *gts, int gain); + +/** + * iio_gts_valid_gain - check if given HW-gain is valid + * @gts: Gain time scale descriptor + * @gain: HW-gain to check + * + * Return: True if given time is supported by device. False if not. + */ +static inline bool iio_gts_valid_gain(struct iio_gts *gts, int gain) +{ + return iio_gts_find_sel_by_gain(gts, gain) >= 0; +} + +int iio_find_closest_gain_low(struct iio_gts *gts, int gain, bool *in_range); +int iio_gts_find_gain_by_sel(struct iio_gts *gts, int sel); +int iio_gts_get_min_gain(struct iio_gts *gts); +int iio_gts_find_int_time_by_sel(struct iio_gts *gts, int sel); +int iio_gts_find_sel_by_int_time(struct iio_gts *gts, int time); + +int iio_gts_total_gain_to_scale(struct iio_gts *gts, int total_gain, + int *scale_int, int *scale_nano); +int iio_gts_find_gain_sel_for_scale_using_time(struct iio_gts *gts, int time_sel, + int scale_int, int scale_nano, + int *gain_sel); +int iio_gts_get_scale(struct iio_gts *gts, int gain, int time, int *scale_int, + int *scale_nano); +int iio_gts_find_new_gain_sel_by_old_gain_time(struct iio_gts *gts, + int old_gain, int old_time_sel, + int new_time_sel, int *new_gain); +int iio_gts_find_new_gain_by_old_gain_time(struct iio_gts *gts, int old_gain, + int old_time, int new_time, + int *new_gain); +int iio_gts_avail_times(struct iio_gts *gts, const int **vals, int *type, + int *length); +int iio_gts_all_avail_scales(struct iio_gts *gts, const int **vals, int *type, + int *length); +int iio_gts_avail_scales_for_time(struct iio_gts *gts, int time, + const int **vals, int *type, int *length); + +#endif diff --git a/include/linux/iio/trigger.h b/include/linux/iio/trigger.h index f6360d9a492d..51f52c5c6092 100644 --- a/include/linux/iio/trigger.h +++ b/include/linux/iio/trigger.h @@ -151,14 +151,8 @@ void iio_trigger_unregister(struct iio_trigger *trig_info); **/ int iio_trigger_set_immutable(struct iio_dev *indio_dev, struct iio_trigger *trig); -/** - * iio_trigger_poll() - called on a trigger occurring - * @trig: trigger which occurred - * - * Typically called in relevant hardware interrupt handler. - **/ void iio_trigger_poll(struct iio_trigger *trig); -void iio_trigger_poll_chained(struct iio_trigger *trig); +void iio_trigger_poll_nested(struct iio_trigger *trig); irqreturn_t iio_trigger_generic_data_rdy_poll(int irq, void *private); diff --git a/include/linux/interconnect-provider.h b/include/linux/interconnect-provider.h index d12cd18aab3f..e6d8aca6886d 100644 --- a/include/linux/interconnect-provider.h +++ b/include/linux/interconnect-provider.h @@ -118,15 +118,12 @@ int icc_std_aggregate(struct icc_node *node, u32 tag, u32 avg_bw, struct icc_node *icc_node_create(int id); void icc_node_destroy(int id); int icc_link_create(struct icc_node *node, const int dst_id); -int icc_link_destroy(struct icc_node *src, struct icc_node *dst); void icc_node_add(struct icc_node *node, struct icc_provider *provider); void icc_node_del(struct icc_node *node); int icc_nodes_remove(struct icc_provider *provider); void icc_provider_init(struct icc_provider *provider); int icc_provider_register(struct icc_provider *provider); void icc_provider_deregister(struct icc_provider *provider); -int icc_provider_add(struct icc_provider *provider); -void icc_provider_del(struct icc_provider *provider); struct icc_node_data *of_icc_get_from_provider(struct of_phandle_args *spec); void icc_sync_state(struct device *dev); @@ -152,11 +149,6 @@ static inline int icc_link_create(struct icc_node *node, const int dst_id) return -ENOTSUPP; } -static inline int icc_link_destroy(struct icc_node *src, struct icc_node *dst) -{ - return -ENOTSUPP; -} - static inline void icc_node_add(struct icc_node *node, struct icc_provider *provider) { } @@ -179,15 +171,6 @@ static inline int icc_provider_register(struct icc_provider *provider) static inline void icc_provider_deregister(struct icc_provider *provider) { } -static inline int icc_provider_add(struct icc_provider *provider) -{ - return -ENOTSUPP; -} - -static inline void icc_provider_del(struct icc_provider *provider) -{ -} - static inline struct icc_node_data *of_icc_get_from_provider(struct of_phandle_args *spec) { return ERR_PTR(-ENOTSUPP); diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h index 117d02708439..eda1ffd99c1a 100644 --- a/include/linux/mfd/palmas.h +++ b/include/linux/mfd/palmas.h @@ -128,12 +128,6 @@ struct palmas_pmic_driver_data { struct regulator_config config); }; -struct palmas_adc_wakeup_property { - int adc_channel_number; - int adc_high_threshold; - int adc_low_threshold; -}; - struct palmas_gpadc_platform_data { /* Channel 3 current source is only enabled during conversion */ int ch3_current; /* 0: off; 1: 10uA; 2: 400uA; 3: 800 uA */ @@ -152,8 +146,6 @@ struct palmas_gpadc_platform_data { int start_polarity; int auto_conversion_period_ms; - struct palmas_adc_wakeup_property *adc_wakeup1_data; - struct palmas_adc_wakeup_property *adc_wakeup2_data; }; struct palmas_reg_init { diff --git a/include/linux/mhi.h b/include/linux/mhi.h index a5441ad33c74..f6de4b6ecfc7 100644 --- a/include/linux/mhi.h +++ b/include/linux/mhi.h @@ -766,13 +766,6 @@ int mhi_prepare_for_transfer_autoqueue(struct mhi_device *mhi_dev); void mhi_unprepare_from_transfer(struct mhi_device *mhi_dev); /** - * mhi_poll - Poll for any available data in DL direction - * @mhi_dev: Device associated with the channels - * @budget: # of events to process - */ -int mhi_poll(struct mhi_device *mhi_dev, u32 budget); - -/** * mhi_queue_dma - Send or receive DMA mapped buffers from client device * over MHI channel * @mhi_dev: Device associated with the channels diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 549590e9c644..ccaaeda792c0 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -9,6 +9,7 @@ #define LINUX_MOD_DEVICETABLE_H #ifdef __KERNEL__ +#include <linux/mei.h> #include <linux/types.h> #include <linux/uuid.h> typedef unsigned long kernel_ulong_t; @@ -911,4 +912,19 @@ struct ishtp_device_id { kernel_ulong_t driver_data; }; +/** + * struct cdx_device_id - CDX device identifier + * @vendor: Vendor ID + * @device: Device ID + * @override_only: Match only when dev->driver_override is this driver. + * + * Type of entries in the "device Id" table for CDX devices supported by + * a CDX device driver. + */ +struct cdx_device_id { + __u16 vendor; + __u16 device; + __u32 override_only; +}; + #endif /* LINUX_MOD_DEVICETABLE_H */ diff --git a/include/linux/nvmem-consumer.h b/include/linux/nvmem-consumer.h index 1f62f7ba71ca..fa030d93b768 100644 --- a/include/linux/nvmem-consumer.h +++ b/include/linux/nvmem-consumer.h @@ -239,6 +239,7 @@ struct nvmem_cell *of_nvmem_cell_get(struct device_node *np, const char *id); struct nvmem_device *of_nvmem_device_get(struct device_node *np, const char *name); +struct device_node *of_nvmem_layout_get_container(struct nvmem_device *nvmem); #else static inline struct nvmem_cell *of_nvmem_cell_get(struct device_node *np, const char *id) @@ -251,6 +252,12 @@ static inline struct nvmem_device *of_nvmem_device_get(struct device_node *np, { return ERR_PTR(-EOPNOTSUPP); } + +static inline struct device_node * +of_nvmem_layout_get_container(struct nvmem_device *nvmem) +{ + return ERR_PTR(-EOPNOTSUPP); +} #endif /* CONFIG_NVMEM && CONFIG_OF */ #endif /* ifndef _LINUX_NVMEM_CONSUMER_H */ diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h index 0262b86194eb..dae26295e6be 100644 --- a/include/linux/nvmem-provider.h +++ b/include/linux/nvmem-provider.h @@ -9,6 +9,7 @@ #ifndef _LINUX_NVMEM_PROVIDER_H #define _LINUX_NVMEM_PROVIDER_H +#include <linux/device/driver.h> #include <linux/err.h> #include <linux/errno.h> #include <linux/gpio/consumer.h> @@ -20,7 +21,8 @@ typedef int (*nvmem_reg_write_t)(void *priv, unsigned int offset, void *val, size_t bytes); /* used for vendor specific post processing of cell data */ typedef int (*nvmem_cell_post_process_t)(void *priv, const char *id, int index, - unsigned int offset, void *buf, size_t bytes); + unsigned int offset, void *buf, + size_t bytes); enum nvmem_type { NVMEM_TYPE_UNKNOWN = 0, @@ -50,18 +52,25 @@ struct nvmem_keepout { * struct nvmem_cell_info - NVMEM cell description * @name: Name. * @offset: Offset within the NVMEM device. + * @raw_len: Length of raw data (without post processing). * @bytes: Length of the cell. * @bit_offset: Bit offset if cell is smaller than a byte. * @nbits: Number of bits. * @np: Optional device_node pointer. + * @read_post_process: Callback for optional post processing of cell data + * on reads. + * @priv: Opaque data passed to the read_post_process hook. */ struct nvmem_cell_info { const char *name; unsigned int offset; + size_t raw_len; unsigned int bytes; unsigned int bit_offset; unsigned int nbits; struct device_node *np; + nvmem_cell_post_process_t read_post_process; + void *priv; }; /** @@ -82,12 +91,12 @@ struct nvmem_cell_info { * @no_of_node: Device should not use the parent's of_node even if it's !NULL. * @reg_read: Callback to read data. * @reg_write: Callback to write data. - * @cell_post_process: Callback for vendor specific post processing of cell data * @size: Device size. * @word_size: Minimum read/write access granularity. * @stride: Minimum read/write access stride. * @priv: User context passed to read/write callbacks. * @ignore_wp: Write Protect pin is managed by the provider. + * @layout: Fixed layout associated with this nvmem device. * * Note: A default "nvmem<id>" name will be assigned to the device if * no name is specified in its configuration. In such case "<id>" is @@ -109,11 +118,11 @@ struct nvmem_config { bool read_only; bool root_only; bool ignore_wp; + struct nvmem_layout *layout; struct device_node *of_node; bool no_of_node; nvmem_reg_read_t reg_read; nvmem_reg_write_t reg_write; - nvmem_cell_post_process_t cell_post_process; int size; int word_size; int stride; @@ -142,6 +151,38 @@ struct nvmem_cell_table { struct list_head node; }; +/** + * struct nvmem_layout - NVMEM layout definitions + * + * @name: Layout name. + * @of_match_table: Open firmware match table. + * @add_cells: Will be called if a nvmem device is found which + * has this layout. The function will add layout + * specific cells with nvmem_add_one_cell(). + * @fixup_cell_info: Will be called before a cell is added. Can be + * used to modify the nvmem_cell_info. + * @owner: Pointer to struct module. + * @node: List node. + * + * A nvmem device can hold a well defined structure which can just be + * evaluated during runtime. For example a TLV list, or a list of "name=val" + * pairs. A nvmem layout can parse the nvmem device and add appropriate + * cells. + */ +struct nvmem_layout { + const char *name; + const struct of_device_id *of_match_table; + int (*add_cells)(struct device *dev, struct nvmem_device *nvmem, + struct nvmem_layout *layout); + void (*fixup_cell_info)(struct nvmem_device *nvmem, + struct nvmem_layout *layout, + struct nvmem_cell_info *cell); + + /* private */ + struct module *owner; + struct list_head node; +}; + #if IS_ENABLED(CONFIG_NVMEM) struct nvmem_device *nvmem_register(const struct nvmem_config *cfg); @@ -156,6 +197,14 @@ void nvmem_del_cell_table(struct nvmem_cell_table *table); int nvmem_add_one_cell(struct nvmem_device *nvmem, const struct nvmem_cell_info *info); +int __nvmem_layout_register(struct nvmem_layout *layout, struct module *owner); +#define nvmem_layout_register(layout) \ + __nvmem_layout_register(layout, THIS_MODULE) +void nvmem_layout_unregister(struct nvmem_layout *layout); + +const void *nvmem_layout_get_match_data(struct nvmem_device *nvmem, + struct nvmem_layout *layout); + #else static inline struct nvmem_device *nvmem_register(const struct nvmem_config *c) @@ -179,5 +228,24 @@ static inline int nvmem_add_one_cell(struct nvmem_device *nvmem, return -EOPNOTSUPP; } +static inline int nvmem_layout_register(struct nvmem_layout *layout) +{ + return -EOPNOTSUPP; +} + +static inline void nvmem_layout_unregister(struct nvmem_layout *layout) {} + +static inline const void * +nvmem_layout_get_match_data(struct nvmem_device *nvmem, + struct nvmem_layout *layout) +{ + return NULL; +} + #endif /* CONFIG_NVMEM */ + +#define module_nvmem_layout_driver(__layout_driver) \ + module_driver(__layout_driver, nvmem_layout_register, \ + nvmem_layout_unregister) + #endif /* ifndef _LINUX_NVMEM_PROVIDER_H */ diff --git a/include/linux/of.h b/include/linux/of.h index bc2eb39dcf75..6ecde0515677 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -371,7 +371,8 @@ extern int of_n_size_cells(struct device_node *np); extern const struct of_device_id *of_match_node( const struct of_device_id *matches, const struct device_node *node); extern const void *of_device_get_match_data(const struct device *dev); -extern int of_modalias_node(struct device_node *node, char *modalias, int len); +extern int of_alias_from_compatible(const struct device_node *node, char *alias, + int len); extern void of_print_phandle_args(const char *msg, const struct of_phandle_args *args); extern int __of_parse_phandle_with_args(const struct device_node *np, const char *list_name, const char *cells_name, int cell_count, @@ -382,6 +383,10 @@ extern int of_parse_phandle_with_args_map(const struct device_node *np, extern int of_count_phandle_with_args(const struct device_node *np, const char *list_name, const char *cells_name); +/* module functions */ +extern ssize_t of_modalias(const struct device_node *np, char *str, ssize_t len); +extern int of_request_module(const struct device_node *np); + /* phandle iterator functions */ extern int of_phandle_iterator_init(struct of_phandle_iterator *it, const struct device_node *np, @@ -747,6 +752,17 @@ static inline int of_count_phandle_with_args(const struct device_node *np, return -ENOSYS; } +static inline ssize_t of_modalias(const struct device_node *np, char *str, + ssize_t len) +{ + return -ENODEV; +} + +static inline int of_request_module(const struct device_node *np) +{ + return -ENODEV; +} + static inline int of_phandle_iterator_init(struct of_phandle_iterator *it, const struct device_node *np, const char *list_name, diff --git a/include/linux/of_device.h b/include/linux/of_device.h index 33f0ca348a62..2c7a3d4bc775 100644 --- a/include/linux/of_device.h +++ b/include/linux/of_device.h @@ -27,7 +27,6 @@ static inline int of_driver_match_device(struct device *dev, } extern ssize_t of_device_modalias(struct device *dev, char *str, ssize_t len); -extern int of_device_request_module(struct device *dev); extern void of_device_uevent(const struct device *dev, struct kobj_uevent_env *env); extern int of_device_uevent_modalias(const struct device *dev, struct kobj_uevent_env *env); @@ -58,11 +57,6 @@ static inline int of_device_modalias(struct device *dev, return -ENODEV; } -static inline int of_device_request_module(struct device *dev) -{ - return -ENODEV; -} - static inline int of_device_uevent_modalias(const struct device *dev, struct kobj_uevent_env *env) { diff --git a/include/linux/uuid.h b/include/linux/uuid.h index 6b1a3efa1e0b..43d4a79b273d 100644 --- a/include/linux/uuid.h +++ b/include/linux/uuid.h @@ -107,7 +107,4 @@ extern const u8 uuid_index[16]; int guid_parse(const char *uuid, guid_t *u); int uuid_parse(const char *uuid, uuid_t *u); -/* MEI UUID type, don't use anywhere else */ -#include <uapi/linux/uuid.h> - #endif diff --git a/include/uapi/linux/cm4000_cs.h b/include/uapi/linux/cm4000_cs.h deleted file mode 100644 index c70a62ec8a49..000000000000 --- a/include/uapi/linux/cm4000_cs.h +++ /dev/null @@ -1,64 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _UAPI_CM4000_H_ -#define _UAPI_CM4000_H_ - -#include <linux/types.h> -#include <linux/ioctl.h> - -#define MAX_ATR 33 - -#define CM4000_MAX_DEV 4 - -/* those two structures are passed via ioctl() from/to userspace. They are - * used by existing userspace programs, so I kepth the awkward "bIFSD" naming - * not to break compilation of userspace apps. -HW */ - -typedef struct atreq { - __s32 atr_len; - unsigned char atr[64]; - __s32 power_act; - unsigned char bIFSD; - unsigned char bIFSC; -} atreq_t; - - -/* what is particularly stupid in the original driver is the arch-dependent - * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace - * will lay out the structure members differently than the 64bit kernel. - * - * I've changed "ptsreq.protocol" from "unsigned long" to "__u32". - * On 32bit this will make no difference. With 64bit kernels, it will make - * 32bit apps work, too. - */ - -typedef struct ptsreq { - __u32 protocol; /*T=0: 2^0, T=1: 2^1*/ - unsigned char flags; - unsigned char pts1; - unsigned char pts2; - unsigned char pts3; -} ptsreq_t; - -#define CM_IOC_MAGIC 'c' -#define CM_IOC_MAXNR 255 - -#define CM_IOCGSTATUS _IOR (CM_IOC_MAGIC, 0, unsigned char *) -#define CM_IOCGATR _IOWR(CM_IOC_MAGIC, 1, atreq_t *) -#define CM_IOCSPTS _IOW (CM_IOC_MAGIC, 2, ptsreq_t *) -#define CM_IOCSRDR _IO (CM_IOC_MAGIC, 3) -#define CM_IOCARDOFF _IO (CM_IOC_MAGIC, 4) - -#define CM_IOSDBGLVL _IOW(CM_IOC_MAGIC, 250, int*) - -/* card and device states */ -#define CM_CARD_INSERTED 0x01 -#define CM_CARD_POWERED 0x02 -#define CM_ATR_PRESENT 0x04 -#define CM_ATR_VALID 0x08 -#define CM_STATE_VALID 0x0f -/* extra info only from CM4000 */ -#define CM_NO_READER 0x10 -#define CM_BAD_CARD 0x20 - - -#endif /* _UAPI_CM4000_H_ */ diff --git a/include/uapi/linux/mei.h b/include/uapi/linux/mei.h index 4f3638489d01..6e57743628c0 100644 --- a/include/uapi/linux/mei.h +++ b/include/uapi/linux/mei.h @@ -7,7 +7,7 @@ #ifndef _LINUX_MEI_H #define _LINUX_MEI_H -#include <linux/uuid.h> +#include <linux/mei_uuid.h> /* * This IOCTL is used to associate the current file descriptor with a diff --git a/include/uapi/linux/mei_uuid.h b/include/uapi/linux/mei_uuid.h new file mode 100644 index 000000000000..676ebe12d623 --- /dev/null +++ b/include/uapi/linux/mei_uuid.h @@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * MEI UUID definition + * + * Copyright (C) 2010, Intel Corp. + * Huang Ying <ying.huang@intel.com> + */ + +#ifndef _UAPI_LINUX_MEI_UUID_H_ +#define _UAPI_LINUX_MEI_UUID_H_ + +#include <linux/types.h> + +typedef struct { + __u8 b[16]; +} uuid_le; + +#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \ +((uuid_le) \ +{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \ + (b) & 0xff, ((b) >> 8) & 0xff, \ + (c) & 0xff, ((c) >> 8) & 0xff, \ + (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }}) + +#define NULL_UUID_LE \ + UUID_LE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00) + +#endif /* _UAPI_LINUX_MEI_UUID_H_ */ diff --git a/include/uapi/linux/uuid.h b/include/uapi/linux/uuid.h index 96ac684a4b2f..8443738f4bb2 100644 --- a/include/uapi/linux/uuid.h +++ b/include/uapi/linux/uuid.h @@ -1,30 +1 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* DO NOT USE in new code! This is solely for MEI due to legacy reasons */ -/* - * MEI UUID definition - * - * Copyright (C) 2010, Intel Corp. - * Huang Ying <ying.huang@intel.com> - */ - -#ifndef _UAPI_LINUX_UUID_H_ -#define _UAPI_LINUX_UUID_H_ - -#include <linux/types.h> - -typedef struct { - __u8 b[16]; -} uuid_le; - -#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \ -((uuid_le) \ -{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \ - (b) & 0xff, ((b) >> 8) & 0xff, \ - (c) & 0xff, ((c) >> 8) & 0xff, \ - (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }}) - -#define NULL_UUID_LE \ - UUID_LE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \ - 0x00, 0x00, 0x00, 0x00) - -#endif /* _UAPI_LINUX_UUID_H_ */ +#include <linux/mei_uuid.h> diff --git a/kernel/configs/android-base.config b/kernel/configs/android-base.config deleted file mode 100644 index 44b0f0146a3f..000000000000 --- a/kernel/configs/android-base.config +++ /dev/null @@ -1,159 +0,0 @@ -# KEEP ALPHABETICALLY SORTED -# CONFIG_DEVMEM is not set -# CONFIG_FHANDLE is not set -# CONFIG_INET_LRO is not set -# CONFIG_NFSD is not set -# CONFIG_NFS_FS is not set -# CONFIG_OABI_COMPAT is not set -# CONFIG_SYSVIPC is not set -# CONFIG_USELIB is not set -CONFIG_ANDROID_BINDER_IPC=y -CONFIG_ANDROID_BINDER_DEVICES=binder,hwbinder,vndbinder -CONFIG_ANDROID_LOW_MEMORY_KILLER=y -CONFIG_ARMV8_DEPRECATED=y -CONFIG_ASHMEM=y -CONFIG_AUDIT=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_CGROUPS=y -CONFIG_CGROUP_BPF=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_DEBUG=y -CONFIG_CGROUP_FREEZER=y -CONFIG_CGROUP_SCHED=y -CONFIG_CP15_BARRIER_EMULATION=y -CONFIG_DEFAULT_SECURITY_SELINUX=y -CONFIG_EMBEDDED=y -CONFIG_FB=y -CONFIG_HARDENED_USERCOPY=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_INET6_AH=y -CONFIG_INET6_ESP=y -CONFIG_INET6_IPCOMP=y -CONFIG_INET=y -CONFIG_INET_DIAG_DESTROY=y -CONFIG_INET_ESP=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_IP6_NF_FILTER=y -CONFIG_IP6_NF_IPTABLES=y -CONFIG_IP6_NF_MANGLE=y -CONFIG_IP6_NF_RAW=y -CONFIG_IP6_NF_TARGET_REJECT=y -CONFIG_IPV6=y -CONFIG_IPV6_MIP6=y -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_OPTIMISTIC_DAD=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_NF_ARPFILTER=y -CONFIG_IP_NF_ARPTABLES=y -CONFIG_IP_NF_ARP_MANGLE=y -CONFIG_IP_NF_FILTER=y -CONFIG_IP_NF_IPTABLES=y -CONFIG_IP_NF_MANGLE=y -CONFIG_IP_NF_MATCH_AH=y -CONFIG_IP_NF_MATCH_ECN=y -CONFIG_IP_NF_MATCH_TTL=y -CONFIG_IP_NF_NAT=y -CONFIG_IP_NF_RAW=y -CONFIG_IP_NF_SECURITY=y -CONFIG_IP_NF_TARGET_MASQUERADE=y -CONFIG_IP_NF_TARGET_NETMAP=y -CONFIG_IP_NF_TARGET_REDIRECT=y -CONFIG_IP_NF_TARGET_REJECT=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_NET=y -CONFIG_NETDEVICES=y -CONFIG_NETFILTER=y -CONFIG_NETFILTER_TPROXY=y -CONFIG_NETFILTER_XT_MATCH_COMMENT=y -CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y -CONFIG_NETFILTER_XT_MATCH_CONNMARK=y -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y -CONFIG_NETFILTER_XT_MATCH_HELPER=y -CONFIG_NETFILTER_XT_MATCH_IPRANGE=y -CONFIG_NETFILTER_XT_MATCH_LENGTH=y -CONFIG_NETFILTER_XT_MATCH_LIMIT=y -CONFIG_NETFILTER_XT_MATCH_MAC=y -CONFIG_NETFILTER_XT_MATCH_MARK=y -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y -CONFIG_NETFILTER_XT_MATCH_POLICY=y -CONFIG_NETFILTER_XT_MATCH_QUOTA=y -CONFIG_NETFILTER_XT_MATCH_SOCKET=y -CONFIG_NETFILTER_XT_MATCH_STATE=y -CONFIG_NETFILTER_XT_MATCH_STATISTIC=y -CONFIG_NETFILTER_XT_MATCH_STRING=y -CONFIG_NETFILTER_XT_MATCH_TIME=y -CONFIG_NETFILTER_XT_MATCH_U32=y -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y -CONFIG_NETFILTER_XT_TARGET_CONNMARK=y -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y -CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y -CONFIG_NETFILTER_XT_TARGET_MARK=y -CONFIG_NETFILTER_XT_TARGET_NFLOG=y -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y -CONFIG_NETFILTER_XT_TARGET_SECMARK=y -CONFIG_NETFILTER_XT_TARGET_TCPMSS=y -CONFIG_NETFILTER_XT_TARGET_TPROXY=y -CONFIG_NETFILTER_XT_TARGET_TRACE=y -CONFIG_NET_CLS_ACT=y -CONFIG_NET_CLS_U32=y -CONFIG_NET_EMATCH=y -CONFIG_NET_EMATCH_U32=y -CONFIG_NET_KEY=y -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_HTB=y -CONFIG_NF_CONNTRACK=y -CONFIG_NF_CONNTRACK_AMANDA=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CONNTRACK_FTP=y -CONFIG_NF_CONNTRACK_H323=y -CONFIG_NF_CONNTRACK_IPV4=y -CONFIG_NF_CONNTRACK_IPV6=y -CONFIG_NF_CONNTRACK_IRC=y -CONFIG_NF_CONNTRACK_NETBIOS_NS=y -CONFIG_NF_CONNTRACK_PPTP=y -CONFIG_NF_CONNTRACK_SANE=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_TFTP=y -CONFIG_NF_CT_NETLINK=y -CONFIG_NF_CT_PROTO_DCCP=y -CONFIG_NF_CT_PROTO_SCTP=y -CONFIG_NF_CT_PROTO_UDPLITE=y -CONFIG_NF_NAT=y -CONFIG_NO_HZ=y -CONFIG_PACKET=y -CONFIG_PM_AUTOSLEEP=y -CONFIG_PM_WAKELOCKS=y -CONFIG_PPP=y -CONFIG_PPP_BSDCOMP=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_MPPE=y -CONFIG_PREEMPT=y -CONFIG_QUOTA=y -CONFIG_RANDOMIZE_BASE=y -CONFIG_RTC_CLASS=y -CONFIG_RT_GROUP_SCHED=y -CONFIG_SECCOMP=y -CONFIG_SECURITY=y -CONFIG_SECURITY_NETWORK=y -CONFIG_SECURITY_SELINUX=y -CONFIG_SETEND_EMULATION=y -CONFIG_STAGING=y -CONFIG_SWP_EMULATION=y -CONFIG_SYNC=y -CONFIG_TUN=y -CONFIG_UNIX=y -CONFIG_USB_GADGET=y -CONFIG_USB_CONFIGFS=y -CONFIG_USB_CONFIGFS_F_FS=y -CONFIG_USB_CONFIGFS_F_MIDI=y -CONFIG_USB_OTG_WAKELOCK=y -CONFIG_XFRM_USER=y diff --git a/kernel/configs/android-recommended.config b/kernel/configs/android-recommended.config deleted file mode 100644 index e400fbbc8aba..000000000000 --- a/kernel/configs/android-recommended.config +++ /dev/null @@ -1,127 +0,0 @@ -# KEEP ALPHABETICALLY SORTED -# CONFIG_BPF_UNPRIV_DEFAULT_OFF is not set -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_NF_CONNTRACK_SIP is not set -# CONFIG_PM_WAKELOCKS_GC is not set -# CONFIG_VT is not set -CONFIG_ARM64_SW_TTBR0_PAN=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BLK_DEV_DM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_STACKPROTECTOR_STRONG=y -CONFIG_COMPACTION=y -CONFIG_CPU_SW_DOMAIN_PAN=y -CONFIG_DM_CRYPT=y -CONFIG_DM_UEVENT=y -CONFIG_DM_VERITY=y -CONFIG_DM_VERITY_FEC=y -CONFIG_DRAGONRISE_FF=y -CONFIG_ENABLE_DEFAULT_TRACERS=y -CONFIG_EXT4_FS=y -CONFIG_EXT4_FS_SECURITY=y -CONFIG_FUSE_FS=y -CONFIG_GREENASIA_FF=y -CONFIG_HIDRAW=y -CONFIG_HID_A4TECH=y -CONFIG_HID_ACRUX=y -CONFIG_HID_ACRUX_FF=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_DRAGONRISE=y -CONFIG_HID_ELECOM=y -CONFIG_HID_EMS_FF=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GREENASIA=y -CONFIG_HID_GYRATION=y -CONFIG_HID_HOLTEK=y -CONFIG_HID_KENSINGTON=y -CONFIG_HID_KEYTOUCH=y -CONFIG_HID_KYE=y -CONFIG_HID_LCPOWER=y -CONFIG_HID_LOGITECH=y -CONFIG_HID_LOGITECH_DJ=y -CONFIG_HID_MAGICMOUSE=y -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -CONFIG_HID_MULTITOUCH=y -CONFIG_HID_NTRIG=y -CONFIG_HID_ORTEK=y -CONFIG_HID_PANTHERLORD=y -CONFIG_HID_PETALYNX=y -CONFIG_HID_PICOLCD=y -CONFIG_HID_PRIMAX=y -CONFIG_HID_PRODIKEYS=y -CONFIG_HID_ROCCAT=y -CONFIG_HID_SAITEK=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SMARTJOYPLUS=y -CONFIG_HID_SONY=y -CONFIG_HID_SPEEDLINK=y -CONFIG_HID_SUNPLUS=y -CONFIG_HID_THRUSTMASTER=y -CONFIG_HID_TIVO=y -CONFIG_HID_TOPSEED=y -CONFIG_HID_TWINHAN=y -CONFIG_HID_UCLOGIC=y -CONFIG_HID_WACOM=y -CONFIG_HID_WALTOP=y -CONFIG_HID_WIIMOTE=y -CONFIG_HID_ZEROPLUS=y -CONFIG_HID_ZYDACRON=y -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_GPIO=y -CONFIG_INPUT_JOYSTICK=y -CONFIG_INPUT_MISC=y -CONFIG_INPUT_TABLET=y -CONFIG_INPUT_UINPUT=y -CONFIG_JOYSTICK_XPAD=y -CONFIG_JOYSTICK_XPAD_FF=y -CONFIG_JOYSTICK_XPAD_LEDS=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KSM=y -CONFIG_LOGIG940_FF=y -CONFIG_LOGIRUMBLEPAD2_FF=y -CONFIG_LOGITECH_FF=y -CONFIG_MD=y -CONFIG_MEDIA_SUPPORT=y -CONFIG_MSDOS_FS=y -CONFIG_PANIC_TIMEOUT=5 -CONFIG_PANTHERLORD_FF=y -CONFIG_PERF_EVENTS=y -CONFIG_PM_DEBUG=y -CONFIG_PM_RUNTIME=y -CONFIG_PM_WAKELOCKS_LIMIT=0 -CONFIG_POWER_SUPPLY=y -CONFIG_PSTORE=y -CONFIG_PSTORE_CONSOLE=y -CONFIG_PSTORE_RAM=y -CONFIG_SCHEDSTATS=y -CONFIG_SMARTJOYPLUS_FF=y -CONFIG_SND=y -CONFIG_SOUND=y -CONFIG_STRICT_KERNEL_RWX=y -CONFIG_SUSPEND_TIME=y -CONFIG_TABLET_USB_ACECAD=y -CONFIG_TABLET_USB_AIPTEK=y -CONFIG_TABLET_USB_HANWANG=y -CONFIG_TABLET_USB_KBTAB=y -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_TASK_XACCT=y -CONFIG_TIMER_STATS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_UHID=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_HIDDEV=y -CONFIG_USB_USBNET=y -CONFIG_VFAT_FS=y diff --git a/samples/acrn/vm-sample.c b/samples/acrn/vm-sample.c index 7abd68b20153..704402c64ea3 100644 --- a/samples/acrn/vm-sample.c +++ b/samples/acrn/vm-sample.c @@ -13,7 +13,6 @@ #include <stdint.h> #include <stdlib.h> #include <string.h> -#include <malloc.h> #include <fcntl.h> #include <unistd.h> #include <signal.h> @@ -54,8 +53,8 @@ int main(int argc, char **argv) argc = argc; argv = argv; - guest_memory = memalign(4096, GUEST_MEMORY_SIZE); - if (!guest_memory) { + ret = posix_memalign(&guest_memory, 4096, GUEST_MEMORY_SIZE); + if (ret < 0) { printf("No enough memory!\n"); return -1; } diff --git a/scripts/mod/devicetable-offsets.c b/scripts/mod/devicetable-offsets.c index c0d3bcb99138..62dc988df84d 100644 --- a/scripts/mod/devicetable-offsets.c +++ b/scripts/mod/devicetable-offsets.c @@ -262,5 +262,9 @@ int main(void) DEVID(ishtp_device_id); DEVID_FIELD(ishtp_device_id, guid); + DEVID(cdx_device_id); + DEVID_FIELD(cdx_device_id, vendor); + DEVID_FIELD(cdx_device_id, device); + return 0; } diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c index 91c2e7ba5e52..28da34ba4359 100644 --- a/scripts/mod/file2alias.c +++ b/scripts/mod/file2alias.c @@ -1452,6 +1452,17 @@ static int do_dfl_entry(const char *filename, void *symval, char *alias) return 1; } +/* Looks like: cdx:vNdN */ +static int do_cdx_entry(const char *filename, void *symval, + char *alias) +{ + DEF_FIELD(symval, cdx_device_id, vendor); + DEF_FIELD(symval, cdx_device_id, device); + + sprintf(alias, "cdx:v%08Xd%08Xd", vendor, device); + return 1; +} + /* Does namelen bytes of name exactly match the symbol? */ static bool sym_is(const char *name, unsigned namelen, const char *symbol) { @@ -1531,6 +1542,7 @@ static const struct devtable devtable[] = { {"ssam", SIZE_ssam_device_id, do_ssam_entry}, {"dfl", SIZE_dfl_device_id, do_dfl_entry}, {"ishtp", SIZE_ishtp_device_id, do_ishtp_entry}, + {"cdx", SIZE_cdx_device_id, do_cdx_entry}, }; /* Create MODULE_ALIAS() statements. |