summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/power/qcom,rpmpd.yaml1
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt87
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml114
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml3
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml1
-rw-r--r--drivers/firmware/Kconfig2
-rw-r--r--drivers/firmware/Makefile3
-rw-r--r--drivers/firmware/qcom_scm.c8
-rw-r--r--drivers/iommu/Kconfig2
-rw-r--r--drivers/net/wireless/ath/ath10k/Kconfig1
-rw-r--r--drivers/soc/qcom/cpr.c43
-rw-r--r--drivers/soc/qcom/mdt_loader.c18
-rw-r--r--drivers/soc/qcom/qcom-geni-se.c30
-rw-r--r--drivers/soc/qcom/qcom_aoss.c9
-rw-r--r--drivers/soc/qcom/rpmhpd.c5
-rw-r--r--drivers/soc/qcom/rpmpd.c28
-rw-r--r--drivers/soc/qcom/smd-rpm.c1
-rw-r--r--drivers/soc/qcom/smsm.c28
-rw-r--r--drivers/soc/qcom/socinfo.c4
-rw-r--r--include/dt-bindings/power/qcom-rpmpd.h10
-rw-r--r--include/linux/qcom-geni-se.h19
21 files changed, 269 insertions, 148 deletions
diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
index 4807b560f00d..239f37881cae 100644
--- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
+++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
@@ -30,6 +30,7 @@ properties:
- qcom,sc8180x-rpmhpd
- qcom,sdm845-rpmhpd
- qcom,sdx55-rpmhpd
+ - qcom,sm6115-rpmpd
- qcom,sm8150-rpmhpd
- qcom,sm8250-rpmhpd
- qcom,sm8350-rpmhpd
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
deleted file mode 100644
index 783dc81b0f26..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-Qualcomm Always-On Subsystem side channel binding
-
-This binding describes the hardware component responsible for side channel
-requests to the always-on subsystem (AOSS), used for certain power management
-requests that is not handled by the standard RPMh interface. Each client in the
-SoC has it's own block of message RAM and IRQ for communication with the AOSS.
-The protocol used to communicate in the message RAM is known as Qualcomm
-Messaging Protocol (QMP)
-
-The AOSS side channel exposes control over a set of resources, used to control
-a set of debug related clocks and to affect the low power state of resources
-related to the secondary subsystems. These resources are exposed as a set of
-power-domains.
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,sc7180-aoss-qmp"
- "qcom,sc7280-aoss-qmp"
- "qcom,sdm845-aoss-qmp"
- "qcom,sm8150-aoss-qmp"
- "qcom,sm8250-aoss-qmp"
- "qcom,sm8350-aoss-qmp"
-
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: the base address and size of the message RAM for this
- client's communication with the AOSS
-
-- interrupts:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: should specify the AOSS message IRQ for this client
-
-- mboxes:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: reference to the mailbox representing the outgoing doorbell
- in APCS for this client, as described in mailbox/mailbox.txt
-
-- #clock-cells:
- Usage: optional
- Value type: <u32>
- Definition: must be 0
- The single clock represents the QDSS clock.
-
-- #power-domain-cells:
- Usage: optional
- Value type: <u32>
- Definition: must be 1
- The provided power-domains are:
- CDSP state (0), LPASS state (1), modem state (2), SLPI
- state (3), SPSS state (4) and Venus state (5).
-
-= SUBNODES
-The AOSS side channel also provides the controls for three cooling devices,
-these are expressed as subnodes of the QMP node. The name of the node is used
-to identify the resource and must therefor be "cx", "mx" or "ebi".
-
-- #cooling-cells:
- Usage: optional
- Value type: <u32>
- Definition: must be 2
-
-= EXAMPLE
-
-The following example represents the AOSS side-channel message RAM and the
-mechanism exposing the power-domains, as found in SDM845.
-
- aoss_qmp: qmp@c300000 {
- compatible = "qcom,sdm845-aoss-qmp";
- reg = <0x0c300000 0x100000>;
- interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
- mboxes = <&apss_shared 0>;
-
- #power-domain-cells = <1>;
-
- cx_cdev: cx {
- #cooling-cells = <2>;
- };
-
- mx_cdev: mx {
- #cooling-cells = <2>;
- };
- };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
new file mode 100644
index 000000000000..93e4b737ee1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,aoss-qmp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Always-On Subsystem side channel binding
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+ This binding describes the hardware component responsible for side channel
+ requests to the always-on subsystem (AOSS), used for certain power management
+ requests that is not handled by the standard RPMh interface. Each client in the
+ SoC has it's own block of message RAM and IRQ for communication with the AOSS.
+ The protocol used to communicate in the message RAM is known as Qualcomm
+ Messaging Protocol (QMP)
+
+ The AOSS side channel exposes control over a set of resources, used to control
+ a set of debug related clocks and to affect the low power state of resources
+ related to the secondary subsystems. These resources are exposed as a set of
+ power-domains.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - qcom,sc7180-aoss-qmp
+ - qcom,sc7280-aoss-qmp
+ - qcom,sc8180x-aoss-qmp
+ - qcom,sdm845-aoss-qmp
+ - qcom,sm8150-aoss-qmp
+ - qcom,sm8250-aoss-qmp
+ - qcom,sm8350-aoss-qmp
+ - const: qcom,aoss-qmp
+
+ reg:
+ maxItems: 1
+ description:
+ The base address and size of the message RAM for this client's
+ communication with the AOSS
+
+ interrupts:
+ maxItems: 1
+ description:
+ Should specify the AOSS message IRQ for this client
+
+ mboxes:
+ maxItems: 1
+ description:
+ Reference to the mailbox representing the outgoing doorbell in APCS for
+ this client, as described in mailbox/mailbox.txt
+
+ "#clock-cells":
+ const: 0
+ description:
+ The single clock represents the QDSS clock.
+
+ "#power-domain-cells":
+ const: 1
+ description: |
+ The provided power-domains are:
+ CDSP state (0), LPASS state (1), modem state (2), SLPI
+ state (3), SPSS state (4) and Venus state (5).
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - mboxes
+ - "#clock-cells"
+
+additionalProperties: false
+
+patternProperties:
+ "^(cx|mx|ebi)$":
+ type: object
+ description:
+ The AOSS side channel also provides the controls for three cooling devices,
+ these are expressed as subnodes of the QMP node. The name of the node is
+ used to identify the resource and must therefor be "cx", "mx" or "ebi".
+
+ properties:
+ "#cooling-cells":
+ const: 2
+
+ required:
+ - "#cooling-cells"
+
+ additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ aoss_qmp: qmp@c300000 {
+ compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp";
+ reg = <0x0c300000 0x100000>;
+ interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apss_shared 0>;
+
+ #clock-cells = <0>;
+ #power-domain-cells = <1>;
+
+ cx_cdev: cx {
+ #cooling-cells = <2>;
+ };
+
+ mx_cdev: mx {
+ #cooling-cells = <2>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
index 4663c2bcad50..a776cd37c297 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
@@ -51,6 +51,9 @@ properties:
interconnect-names:
const: qup-core
+ iommus:
+ maxItems: 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
index d511f01fcac6..cc3fe5ed7421 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
@@ -39,6 +39,7 @@ properties:
- qcom,rpm-msm8996
- qcom,rpm-msm8998
- qcom,rpm-sdm660
+ - qcom,rpm-sm6115
- qcom,rpm-sm6125
- qcom,rpm-qcs404
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 8d41f73f5395..77fe6d0f55c6 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -203,7 +203,7 @@ config INTEL_STRATIX10_RSU
Say Y here if you want Intel RSU support.
config QCOM_SCM
- bool
+ tristate "Qcom SCM driver"
depends on ARM || ARM64
depends on HAVE_ARM_SMCCC
select RESET_CONTROLLER
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 546ac8e7f6d0..3c2af2e98def 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -17,7 +17,8 @@ obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o
obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o
obj-$(CONFIG_RASPBERRYPI_FIRMWARE) += raspberrypi.o
obj-$(CONFIG_FW_CFG_SYSFS) += qemu_fw_cfg.o
-obj-$(CONFIG_QCOM_SCM) += qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o
+obj-$(CONFIG_QCOM_SCM) += qcom-scm.o
+qcom-scm-objs += qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o
obj-$(CONFIG_TI_SCI_PROTOCOL) += ti_sci.o
obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o
obj-$(CONFIG_TURRIS_MOX_RWTM) += turris-mox-rwtm.o
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 47ea2bd42b10..ced1964faf42 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -71,7 +71,7 @@ static struct qcom_scm_wb_entry qcom_scm_wb[] = {
{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 },
};
-static const char *qcom_scm_convention_names[] = {
+static const char * const qcom_scm_convention_names[] = {
[SMC_CONVENTION_UNKNOWN] = "unknown",
[SMC_CONVENTION_ARM_32] = "smc arm 32",
[SMC_CONVENTION_ARM_64] = "smc arm 64",
@@ -331,7 +331,7 @@ int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
.owner = ARM_SMCCC_OWNER_SIP,
};
- if (!cpus || (cpus && cpumask_empty(cpus)))
+ if (!cpus || cpumask_empty(cpus))
return -EINVAL;
for_each_cpu(cpu, cpus) {
@@ -1299,6 +1299,7 @@ static const struct of_device_id qcom_scm_dt_match[] = {
{ .compatible = "qcom,scm" },
{}
};
+MODULE_DEVICE_TABLE(of, qcom_scm_dt_match);
static struct platform_driver qcom_scm_driver = {
.driver = {
@@ -1315,3 +1316,6 @@ static int __init qcom_scm_init(void)
return platform_driver_register(&qcom_scm_driver);
}
subsys_initcall(qcom_scm_init);
+
+MODULE_DESCRIPTION("Qualcomm Technologies, Inc. SCM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 07b7c25cbed8..f61516c17589 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -253,6 +253,7 @@ config SPAPR_TCE_IOMMU
config ARM_SMMU
tristate "ARM Ltd. System MMU (SMMU) Support"
depends on ARM64 || ARM || (COMPILE_TEST && !GENERIC_ATOMIC64)
+ depends on QCOM_SCM || !QCOM_SCM #if QCOM_SCM=m this can't be =y
select IOMMU_API
select IOMMU_IO_PGTABLE_LPAE
select ARM_DMA_USE_IOMMU if ARM
@@ -382,6 +383,7 @@ config QCOM_IOMMU
# Note: iommu drivers cannot (yet?) be built as modules
bool "Qualcomm IOMMU Support"
depends on ARCH_QCOM || (COMPILE_TEST && !GENERIC_ATOMIC64)
+ depends on QCOM_SCM=y
select IOMMU_API
select IOMMU_IO_PGTABLE_LPAE
select ARM_DMA_USE_IOMMU
diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig
index 40f91bc8514d..741289e385d5 100644
--- a/drivers/net/wireless/ath/ath10k/Kconfig
+++ b/drivers/net/wireless/ath/ath10k/Kconfig
@@ -44,6 +44,7 @@ config ATH10K_SNOC
tristate "Qualcomm ath10k SNOC support"
depends on ATH10K
depends on ARCH_QCOM || COMPILE_TEST
+ depends on QCOM_SCM || !QCOM_SCM #if QCOM_SCM=m this can't be =y
select QCOM_QMI_HELPERS
help
This module adds support for integrated WCN3990 chip connected
diff --git a/drivers/soc/qcom/cpr.c b/drivers/soc/qcom/cpr.c
index b24cc77d1889..4ce8e816154f 100644
--- a/drivers/soc/qcom/cpr.c
+++ b/drivers/soc/qcom/cpr.c
@@ -801,38 +801,6 @@ unlock:
return ret;
}
-static int cpr_read_efuse(struct device *dev, const char *cname, u32 *data)
-{
- struct nvmem_cell *cell;
- ssize_t len;
- char *ret;
- int i;
-
- *data = 0;
-
- cell = nvmem_cell_get(dev, cname);
- if (IS_ERR(cell)) {
- if (PTR_ERR(cell) != -EPROBE_DEFER)
- dev_err(dev, "undefined cell %s\n", cname);
- return PTR_ERR(cell);
- }
-
- ret = nvmem_cell_read(cell, &len);
- nvmem_cell_put(cell);
- if (IS_ERR(ret)) {
- dev_err(dev, "can't read cell %s\n", cname);
- return PTR_ERR(ret);
- }
-
- for (i = 0; i < len; i++)
- *data |= ret[i] << (8 * i);
-
- kfree(ret);
- dev_dbg(dev, "efuse read(%s) = %x, bytes %zd\n", cname, *data, len);
-
- return 0;
-}
-
static int
cpr_populate_ring_osc_idx(struct cpr_drv *drv)
{
@@ -843,8 +811,7 @@ cpr_populate_ring_osc_idx(struct cpr_drv *drv)
int ret;
for (; fuse < end; fuse++, fuses++) {
- ret = cpr_read_efuse(drv->dev, fuses->ring_osc,
- &data);
+ ret = nvmem_cell_read_variable_le_u32(drv->dev, fuses->ring_osc, &data);
if (ret)
return ret;
fuse->ring_osc_idx = data;
@@ -863,7 +830,7 @@ static int cpr_read_fuse_uV(const struct cpr_desc *desc,
u32 bits = 0;
int ret;
- ret = cpr_read_efuse(drv->dev, init_v_efuse, &bits);
+ ret = nvmem_cell_read_variable_le_u32(drv->dev, init_v_efuse, &bits);
if (ret)
return ret;
@@ -932,7 +899,7 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv)
}
/* Populate target quotient by scaling */
- ret = cpr_read_efuse(drv->dev, fuses->quotient, &fuse->quot);
+ ret = nvmem_cell_read_variable_le_u32(drv->dev, fuses->quotient, &fuse->quot);
if (ret)
return ret;
@@ -1001,7 +968,7 @@ static int cpr_calculate_scaling(const char *quot_offset,
prev_fuse = fuse - 1;
if (quot_offset) {
- ret = cpr_read_efuse(drv->dev, quot_offset, &quot_diff);
+ ret = nvmem_cell_read_variable_le_u32(drv->dev, quot_offset, &quot_diff);
if (ret)
return ret;
@@ -1701,7 +1668,7 @@ static int cpr_probe(struct platform_device *pdev)
* initialized after attaching to the power domain,
* since it depends on the CPU's OPP table.
*/
- ret = cpr_read_efuse(dev, "cpr_fuse_revision", &cpr_rev);
+ ret = nvmem_cell_read_variable_le_u32(dev, "cpr_fuse_revision", &cpr_rev);
if (ret)
return ret;
diff --git a/drivers/soc/qcom/mdt_loader.c b/drivers/soc/qcom/mdt_loader.c
index eba7f76f9d61..bda170d7b4a2 100644
--- a/drivers/soc/qcom/mdt_loader.c
+++ b/drivers/soc/qcom/mdt_loader.c
@@ -166,6 +166,8 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
metadata = qcom_mdt_read_metadata(fw, &metadata_len);
if (IS_ERR(metadata)) {
ret = PTR_ERR(metadata);
+ dev_err(dev, "error %d reading firmware %s metadata\n",
+ ret, fw_name);
goto out;
}
@@ -173,7 +175,9 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
kfree(metadata);
if (ret) {
- dev_err(dev, "invalid firmware metadata\n");
+ /* Invalid firmware metadata */
+ dev_err(dev, "error %d initializing firmware %s\n",
+ ret, fw_name);
goto out;
}
}
@@ -199,7 +203,9 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
ret = qcom_scm_pas_mem_setup(pas_id, mem_phys,
max_addr - min_addr);
if (ret) {
- dev_err(dev, "unable to setup relocation\n");
+ /* Unable to set up relocation */
+ dev_err(dev, "error %d setting up firmware %s\n",
+ ret, fw_name);
goto out;
}
}
@@ -243,9 +249,8 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
if (phdr->p_filesz && phdr->p_offset < fw->size) {
/* Firmware is large enough to be non-split */
if (phdr->p_offset + phdr->p_filesz > fw->size) {
- dev_err(dev,
- "failed to load segment %d from truncated file %s\n",
- i, firmware);
+ dev_err(dev, "file %s segment %d would be truncated\n",
+ fw_name, i);
ret = -EINVAL;
break;
}
@@ -257,7 +262,8 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
ret = request_firmware_into_buf(&seg_fw, fw_name, dev,
ptr, phdr->p_filesz);
if (ret) {
- dev_err(dev, "failed to load %s\n", fw_name);
+ dev_err(dev, "error %d loading %s\n",
+ ret, fw_name);
break;
}
diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index 5bdfb1565c14..7d649d2cf31e 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -104,7 +104,6 @@ static const char * const icc_path_names[] = {"qup-core", "qup-config",
#define GENI_OUTPUT_CTRL 0x24
#define GENI_CGC_CTRL 0x28
#define GENI_CLK_CTRL_RO 0x60
-#define GENI_IF_DISABLE_RO 0x64
#define GENI_FW_S_REVISION_RO 0x6c
#define SE_GENI_BYTE_GRAN 0x254
#define SE_GENI_TX_PACKING_CFG0 0x260
@@ -322,6 +321,30 @@ static void geni_se_select_dma_mode(struct geni_se *se)
writel_relaxed(val, se->base + SE_GENI_DMA_MODE_EN);
}
+static void geni_se_select_gpi_mode(struct geni_se *se)
+{
+ u32 val;
+
+ geni_se_irq_clear(se);
+
+ writel(0, se->base + SE_IRQ_EN);
+
+ val = readl(se->base + SE_GENI_S_IRQ_EN);
+ val &= ~S_CMD_DONE_EN;
+ writel(val, se->base + SE_GENI_S_IRQ_EN);
+
+ val = readl(se->base + SE_GENI_M_IRQ_EN);
+ val &= ~(M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN |
+ M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN);
+ writel(val, se->base + SE_GENI_M_IRQ_EN);
+
+ writel(GENI_DMA_MODE_EN, se->base + SE_GENI_DMA_MODE_EN);
+
+ val = readl(se->base + SE_GSI_EVENT_EN);
+ val |= (DMA_RX_EVENT_EN | DMA_TX_EVENT_EN | GENI_M_EVENT_EN | GENI_S_EVENT_EN);
+ writel(val, se->base + SE_GSI_EVENT_EN);
+}
+
/**
* geni_se_select_mode() - Select the serial engine transfer mode
* @se: Pointer to the concerned serial engine.
@@ -329,7 +352,7 @@ static void geni_se_select_dma_mode(struct geni_se *se)
*/
void geni_se_select_mode(struct geni_se *se, enum geni_se_xfer_mode mode)
{
- WARN_ON(mode != GENI_SE_FIFO && mode != GENI_SE_DMA);
+ WARN_ON(mode != GENI_SE_FIFO && mode != GENI_SE_DMA && mode != GENI_GPI_DMA);
switch (mode) {
case GENI_SE_FIFO:
@@ -338,6 +361,9 @@ void geni_se_select_mode(struct geni_se *se, enum geni_se_xfer_mode mode)
case GENI_SE_DMA:
geni_se_select_dma_mode(se);
break;
+ case GENI_GPI_DMA:
+ geni_se_select_gpi_mode(se);
+ break;
case GENI_SE_INVALID:
default:
break;
diff --git a/drivers/soc/qcom/qcom_aoss.c b/drivers/soc/qcom/qcom_aoss.c
index 934fcc4d2b05..536c3e4114fb 100644
--- a/drivers/soc/qcom/qcom_aoss.c
+++ b/drivers/soc/qcom/qcom_aoss.c
@@ -476,12 +476,12 @@ static int qmp_cooling_device_add(struct qmp *qmp,
static int qmp_cooling_devices_register(struct qmp *qmp)
{
struct device_node *np, *child;
- int count = QMP_NUM_COOLING_RESOURCES;
+ int count = 0;
int ret;
np = qmp->dev->of_node;
- qmp->cooling_devs = devm_kcalloc(qmp->dev, count,
+ qmp->cooling_devs = devm_kcalloc(qmp->dev, QMP_NUM_COOLING_RESOURCES,
sizeof(*qmp->cooling_devs),
GFP_KERNEL);
@@ -497,12 +497,16 @@ static int qmp_cooling_devices_register(struct qmp *qmp)
goto unroll;
}
+ if (!count)
+ devm_kfree(qmp->dev, qmp->cooling_devs);
+
return 0;
unroll:
while (--count >= 0)
thermal_cooling_device_unregister
(qmp->cooling_devs[count].cdev);
+ devm_kfree(qmp->dev, qmp->cooling_devs);
return ret;
}
@@ -602,6 +606,7 @@ static const struct of_device_id qmp_dt_match[] = {
{ .compatible = "qcom,sm8150-aoss-qmp", },
{ .compatible = "qcom,sm8250-aoss-qmp", },
{ .compatible = "qcom,sm8350-aoss-qmp", },
+ { .compatible = "qcom,aoss-qmp", },
{}
};
MODULE_DEVICE_TABLE(of, qmp_dt_match);
diff --git a/drivers/soc/qcom/rpmhpd.c b/drivers/soc/qcom/rpmhpd.c
index 2daa17ba54a3..fa209b479ab3 100644
--- a/drivers/soc/qcom/rpmhpd.c
+++ b/drivers/soc/qcom/rpmhpd.c
@@ -403,12 +403,11 @@ static int rpmhpd_power_on(struct generic_pm_domain *domain)
static int rpmhpd_power_off(struct generic_pm_domain *domain)
{
struct rpmhpd *pd = domain_to_rpmhpd(domain);
- int ret = 0;
+ int ret;
mutex_lock(&rpmhpd_lock);
- ret = rpmhpd_aggregate_corner(pd, pd->level[0]);
-
+ ret = rpmhpd_aggregate_corner(pd, 0);
if (!ret)
pd->enabled = false;
diff --git a/drivers/soc/qcom/rpmpd.c b/drivers/soc/qcom/rpmpd.c
index 0b532a892d60..dbf494e92574 100644
--- a/drivers/soc/qcom/rpmpd.c
+++ b/drivers/soc/qcom/rpmpd.c
@@ -346,6 +346,33 @@ static const struct rpmpd_desc sdm660_desc = {
.max_state = RPM_SMD_LEVEL_TURBO,
};
+/* sm4250/6115 RPM Power domains */
+DEFINE_RPMPD_PAIR(sm6115, vddcx, vddcx_ao, RWCX, LEVEL, 0);
+DEFINE_RPMPD_VFL(sm6115, vddcx_vfl, RWCX, 0);
+
+DEFINE_RPMPD_PAIR(sm6115, vddmx, vddmx_ao, RWMX, LEVEL, 0);
+DEFINE_RPMPD_VFL(sm6115, vddmx_vfl, RWMX, 0);
+
+DEFINE_RPMPD_LEVEL(sm6115, vdd_lpi_cx, RWLC, 0);
+DEFINE_RPMPD_LEVEL(sm6115, vdd_lpi_mx, RWLM, 0);
+
+static struct rpmpd *sm6115_rpmpds[] = {
+ [SM6115_VDDCX] = &sm6115_vddcx,
+ [SM6115_VDDCX_AO] = &sm6115_vddcx_ao,
+ [SM6115_VDDCX_VFL] = &sm6115_vddcx_vfl,
+ [SM6115_VDDMX] = &sm6115_vddmx,
+ [SM6115_VDDMX_AO] = &sm6115_vddmx_ao,
+ [SM6115_VDDMX_VFL] = &sm6115_vddmx_vfl,
+ [SM6115_VDD_LPI_CX] = &sm6115_vdd_lpi_cx,
+ [SM6115_VDD_LPI_MX] = &sm6115_vdd_lpi_mx,
+};
+
+static const struct rpmpd_desc sm6115_desc = {
+ .rpmpds = sm6115_rpmpds,
+ .num_pds = ARRAY_SIZE(sm6115_rpmpds),
+ .max_state = RPM_SMD_LEVEL_TURBO_NO_CPR,
+};
+
static const struct of_device_id rpmpd_match_table[] = {
{ .compatible = "qcom,mdm9607-rpmpd", .data = &mdm9607_desc },
{ .compatible = "qcom,msm8916-rpmpd", .data = &msm8916_desc },
@@ -356,6 +383,7 @@ static const struct of_device_id rpmpd_match_table[] = {
{ .compatible = "qcom,msm8998-rpmpd", .data = &msm8998_desc },
{ .compatible = "qcom,qcs404-rpmpd", .data = &qcs404_desc },
{ .compatible = "qcom,sdm660-rpmpd", .data = &sdm660_desc },
+ { .compatible = "qcom,sm6115-rpmpd", .data = &sm6115_desc },
{ }
};
MODULE_DEVICE_TABLE(of, rpmpd_match_table);
diff --git a/drivers/soc/qcom/smd-rpm.c b/drivers/soc/qcom/smd-rpm.c
index bc0be1d4be5f..dfdd4f20f5fd 100644
--- a/drivers/soc/qcom/smd-rpm.c
+++ b/drivers/soc/qcom/smd-rpm.c
@@ -242,6 +242,7 @@ static const struct of_device_id qcom_smd_rpm_of_match[] = {
{ .compatible = "qcom,rpm-msm8996" },
{ .compatible = "qcom,rpm-msm8998" },
{ .compatible = "qcom,rpm-sdm660" },
+ { .compatible = "qcom,rpm-sm6115" },
{ .compatible = "qcom,rpm-sm6125" },
{ .compatible = "qcom,rpm-qcs404" },
{}
diff --git a/drivers/soc/qcom/smsm.c b/drivers/soc/qcom/smsm.c
index 1d3d5e3ec2b0..ef15d014c03a 100644
--- a/drivers/soc/qcom/smsm.c
+++ b/drivers/soc/qcom/smsm.c
@@ -109,7 +109,7 @@ struct smsm_entry {
DECLARE_BITMAP(irq_enabled, 32);
DECLARE_BITMAP(irq_rising, 32);
DECLARE_BITMAP(irq_falling, 32);
- u32 last_value;
+ unsigned long last_value;
u32 *remote_state;
u32 *subscription;
@@ -204,8 +204,7 @@ static irqreturn_t smsm_intr(int irq, void *data)
u32 val;
val = readl(entry->remote_state);
- changed = val ^ entry->last_value;
- entry->last_value = val;
+ changed = val ^ xchg(&entry->last_value, val);
for_each_set_bit(i, entry->irq_enabled, 32) {
if (!(changed & BIT(i)))
@@ -264,6 +263,12 @@ static void smsm_unmask_irq(struct irq_data *irqd)
struct qcom_smsm *smsm = entry->smsm;
u32 val;
+ /* Make sure our last cached state is up-to-date */
+ if (readl(entry->remote_state) & BIT(irq))
+ set_bit(irq, &entry->last_value);
+ else
+ clear_bit(irq, &entry->last_value);
+
set_bit(irq, entry->irq_enabled);
if (entry->subscription) {
@@ -299,11 +304,28 @@ static int smsm_set_irq_type(struct irq_data *irqd, unsigned int type)
return 0;
}
+static int smsm_get_irqchip_state(struct irq_data *irqd,
+ enum irqchip_irq_state which, bool *state)
+{
+ struct smsm_entry *entry = irq_data_get_irq_chip_data(irqd);
+ irq_hw_number_t irq = irqd_to_hwirq(irqd);
+ u32 val;
+
+ if (which != IRQCHIP_STATE_LINE_LEVEL)
+ return -EINVAL;
+
+ val = readl(entry->remote_state);
+ *state = !!(val & BIT(irq));
+
+ return 0;
+}
+
static struct irq_chip smsm_irq_chip = {
.name = "smsm",
.irq_mask = smsm_mask_irq,
.irq_unmask = smsm_unmask_irq,
.irq_set_type = smsm_set_irq_type,
+ .irq_get_irqchip_state = smsm_get_irqchip_state,
};
/**
diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
index b2f049faa3df..9faf48302f4b 100644
--- a/drivers/soc/qcom/socinfo.c
+++ b/drivers/soc/qcom/socinfo.c
@@ -417,8 +417,8 @@ QCOM_OPEN(chip_id, qcom_show_chip_id);
static int show_image_##type(struct seq_file *seq, void *p) \
{ \
struct smem_image_version *image_version = seq->private; \
- seq_puts(seq, image_version->type); \
- seq_putc(seq, '\n'); \
+ if (image_version->type[0] != '\0') \
+ seq_printf(seq, "%s\n", image_version->type); \
return 0; \
} \
static int open_image_##type(struct inode *inode, struct file *file) \
diff --git a/include/dt-bindings/power/qcom-rpmpd.h b/include/dt-bindings/power/qcom-rpmpd.h
index 8b5708bb9671..4533dbbf9937 100644
--- a/include/dt-bindings/power/qcom-rpmpd.h
+++ b/include/dt-bindings/power/qcom-rpmpd.h
@@ -192,6 +192,16 @@
#define SDM660_SSCMX 8
#define SDM660_SSCMX_VFL 9
+/* SM6115 Power Domains */
+#define SM6115_VDDCX 0
+#define SM6115_VDDCX_AO 1
+#define SM6115_VDDCX_VFL 2
+#define SM6115_VDDMX 3
+#define SM6115_VDDMX_AO 4
+#define SM6115_VDDMX_VFL 5
+#define SM6115_VDD_LPI_CX 6
+#define SM6115_VDD_LPI_MX 7
+
/* RPM SMD Power Domain performance levels */
#define RPM_SMD_LEVEL_RETENTION 16
#define RPM_SMD_LEVEL_RETENTION_PLUS 32
diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h
index 7c811eebcaab..f5672785c0c4 100644
--- a/include/linux/qcom-geni-se.h
+++ b/include/linux/qcom-geni-se.h
@@ -8,11 +8,24 @@
#include <linux/interconnect.h>
-/* Transfer mode supported by GENI Serial Engines */
+/**
+ * enum geni_se_xfer_mode: Transfer modes supported by Serial Engines
+ *
+ * @GENI_SE_INVALID: Invalid mode
+ * @GENI_SE_FIFO: FIFO mode. Data is transferred with SE FIFO
+ * by programmed IO method
+ * @GENI_SE_DMA: Serial Engine DMA mode. Data is transferred
+ * with SE by DMAengine internal to SE
+ * @GENI_GPI_DMA: GPI DMA mode. Data is transferred using a DMAengine
+ * configured by a firmware residing on a GSI engine. This DMA name is
+ * interchangeably used as GSI or GPI which seem to imply the same DMAengine
+ */
+
enum geni_se_xfer_mode {
GENI_SE_INVALID,
GENI_SE_FIFO,
GENI_SE_DMA,
+ GENI_GPI_DMA,
};
/* Protocols supported by GENI Serial Engines */
@@ -63,6 +76,7 @@ struct geni_se {
#define SE_GENI_STATUS 0x40
#define GENI_SER_M_CLK_CFG 0x48
#define GENI_SER_S_CLK_CFG 0x4c
+#define GENI_IF_DISABLE_RO 0x64
#define GENI_FW_REVISION_RO 0x68
#define SE_GENI_CLK_SEL 0x7c
#define SE_GENI_DMA_MODE_EN 0x258
@@ -105,6 +119,9 @@ struct geni_se {
#define CLK_DIV_MSK GENMASK(15, 4)
#define CLK_DIV_SHFT 4
+/* GENI_IF_DISABLE_RO fields */
+#define FIFO_IF_DISABLE (BIT(0))
+
/* GENI_FW_REVISION_RO fields */
#define FW_REV_PROTOCOL_MSK GENMASK(15, 8)
#define FW_REV_PROTOCOL_SHFT 8
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 14:25:30 +0000