Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 837 insertions, 0 deletions

diff --git a/sound/drivers/vx/vx_core.c b/sound/drivers/vx/vx_core.c
new file mode 100644
index 000000000000..c6fa5afa3e9a
--- /dev/null
+++ b/sound/drivers/vx/vx_core.c
@@ -0,0 +1,837 @@
+/*
+ * Driver for Digigram VX soundcards
+ *
+ * Hardware core part
+ *
+ * Copyright (c) 2002 by Takashi Iwai <tiwai@suse.de>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <sound/driver.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/asoundef.h>
+#include <sound/info.h>
+#include <asm/io.h>
+#include <sound/vx_core.h>
+#include "vx_cmd.h"
+
+MODULE_AUTHOR("Takashi Iwai <tiwai@suse.de>");
+MODULE_DESCRIPTION("Common routines for Digigram VX drivers");
+MODULE_LICENSE("GPL");
+
+
+/*
+ * snd_vx_delay - delay for the specified time
+ * @xmsec: the time to delay in msec
+ */
+void snd_vx_delay(vx_core_t *chip, int xmsec)
+{
+	if (! in_interrupt() && xmsec >= 1000 / HZ)
+		msleep(xmsec);
+	else
+		mdelay(xmsec);
+}
+
+/*
+ * vx_check_reg_bit - wait for the specified bit is set/reset on a register
+ * @reg: register to check
+ * @mask: bit mask
+ * @bit: resultant bit to be checked
+ * @time: time-out of loop in msec
+ *
+ * returns zero if a bit matches, or a negative error code.
+ */
+int snd_vx_check_reg_bit(vx_core_t *chip, int reg, int mask, int bit, int time)
+{
+	unsigned long end_time = jiffies + (time * HZ + 999) / 1000;
+#ifdef CONFIG_SND_DEBUG
+	static char *reg_names[VX_REG_MAX] = {
+		"ICR", "CVR", "ISR", "IVR", "RXH", "RXM", "RXL",
+		"DMA", "CDSP", "RFREQ", "RUER/V2", "DATA", "MEMIRQ",
+		"ACQ", "BIT0", "BIT1", "MIC0", "MIC1", "MIC2",
+		"MIC3", "INTCSR", "CNTRL", "GPIOC",
+		"LOFREQ", "HIFREQ", "CSUER", "RUER"
+	};
+#endif
+	do {
+		if ((snd_vx_inb(chip, reg) & mask) == bit)
+			return 0;
+		//snd_vx_delay(chip, 10);
+	} while (time_after_eq(end_time, jiffies));
+	snd_printd(KERN_DEBUG "vx_check_reg_bit: timeout, reg=%s, mask=0x%x, val=0x%x\n", reg_names[reg], mask, snd_vx_inb(chip, reg));
+	return -EIO;
+}
+
+/*
+ * vx_send_irq_dsp - set command irq bit
+ * @num: the requested IRQ type, IRQ_XXX
+ *
+ * this triggers the specified IRQ request
+ * returns 0 if successful, or a negative error code.
+ * 
+ */
+static int vx_send_irq_dsp(vx_core_t *chip, int num)
+{
+	int nirq;
+
+	/* wait for Hc = 0 */
+	if (snd_vx_check_reg_bit(chip, VX_CVR, CVR_HC, 0, 200) < 0)
+		return -EIO;
+
+	nirq = num;
+	if (vx_has_new_dsp(chip))
+		nirq += VXP_IRQ_OFFSET;
+	vx_outb(chip, CVR, (nirq >> 1) | CVR_HC);
+	return 0;
+}
+
+
+/*
+ * vx_reset_chk - reset CHK bit on ISR
+ *
+ * returns 0 if successful, or a negative error code.
+ */
+static int vx_reset_chk(vx_core_t *chip)
+{
+	/* Reset irq CHK */
+	if (vx_send_irq_dsp(chip, IRQ_RESET_CHK) < 0)
+		return -EIO;
+	/* Wait until CHK = 0 */
+	if (vx_check_isr(chip, ISR_CHK, 0, 200) < 0)
+		return -EIO;
+	return 0;
+}
+
+/*
+ * vx_transfer_end - terminate message transfer
+ * @cmd: IRQ message to send (IRQ_MESS_XXX_END)
+ *
+ * returns 0 if successful, or a negative error code.
+ * the error code can be VX-specific, retrieved via vx_get_error().
+ * NB: call with spinlock held!
+ */
+static int vx_transfer_end(vx_core_t *chip, int cmd)
+{
+	int err;
+
+	if ((err = vx_reset_chk(chip)) < 0)
+		return err;
+
+	/* irq MESS_READ/WRITE_END */
+	if ((err = vx_send_irq_dsp(chip, cmd)) < 0)
+		return err;
+
+	/* Wait CHK = 1 */
+	if ((err = vx_wait_isr_bit(chip, ISR_CHK)) < 0)
+		return err;
+
+	/* If error, Read RX */
+	if ((err = vx_inb(chip, ISR)) & ISR_ERR) {
+		if ((err = vx_wait_for_rx_full(chip)) < 0) {
+			snd_printd(KERN_DEBUG "transfer_end: error in rx_full\n");
+			return err;
+		}
+		err = vx_inb(chip, RXH) << 16;
+		err |= vx_inb(chip, RXM) << 8;
+		err |= vx_inb(chip, RXL);
+		snd_printd(KERN_DEBUG "transfer_end: error = 0x%x\n", err);
+		return -(VX_ERR_MASK | err);
+	}
+	return 0;
+}
+
+/*
+ * vx_read_status - return the status rmh
+ * @rmh: rmh record to store the status
+ *
+ * returns 0 if successful, or a negative error code.
+ * the error code can be VX-specific, retrieved via vx_get_error().
+ * NB: call with spinlock held!
+ */
+static int vx_read_status(vx_core_t *chip, struct vx_rmh *rmh)
+{
+	int i, err, val, size;
+
+	/* no read necessary? */
+	if (rmh->DspStat == RMH_SSIZE_FIXED && rmh->LgStat == 0)
+		return 0;
+
+	/* Wait for RX full (with timeout protection)
+	 * The first word of status is in RX
+	 */
+	err = vx_wait_for_rx_full(chip);
+	if (err < 0)
+		return err;
+
+	/* Read RX */
+	val = vx_inb(chip, RXH) << 16;
+	val |= vx_inb(chip, RXM) << 8;
+	val |= vx_inb(chip, RXL);
+
+	/* If status given by DSP, let's decode its size */
+	switch (rmh->DspStat) {
+	case RMH_SSIZE_ARG:
+		size = val & 0xff;
+		rmh->Stat[0] = val & 0xffff00;
+		rmh->LgStat = size + 1;
+		break;
+	case RMH_SSIZE_MASK:
+		/* Let's count the arg numbers from a mask */
+		rmh->Stat[0] = val;
+		size = 0;
+		while (val) {
+			if (val & 0x01)
+				size++;
+			val >>= 1;
+		}
+		rmh->LgStat = size + 1;
+		break;
+	default:
+		/* else retrieve the status length given by the driver */
+		size = rmh->LgStat;
+		rmh->Stat[0] = val;  /* Val is the status 1st word */
+		size--;              /* hence adjust remaining length */
+		break;
+        }
+
+	if (size < 1)
+		return 0;
+	snd_assert(size <= SIZE_MAX_STATUS, return -EINVAL);
+
+	for (i = 1; i <= size; i++) {
+		/* trigger an irq MESS_WRITE_NEXT */
+		err = vx_send_irq_dsp(chip, IRQ_MESS_WRITE_NEXT);
+		if (err < 0)
+			return err;
+		/* Wait for RX full (with timeout protection) */
+		err = vx_wait_for_rx_full(chip);
+		if (err < 0)
+			return err;
+		rmh->Stat[i] = vx_inb(chip, RXH) << 16;
+		rmh->Stat[i] |= vx_inb(chip, RXM) <<  8;
+		rmh->Stat[i] |= vx_inb(chip, RXL);
+	}
+
+	return vx_transfer_end(chip, IRQ_MESS_WRITE_END);
+}
+
+
+#define MASK_MORE_THAN_1_WORD_COMMAND   0x00008000
+#define MASK_1_WORD_COMMAND             0x00ff7fff
+
+/*
+ * vx_send_msg_nolock - send a DSP message and read back the status
+ * @rmh: the rmh record to send and receive
+ *
+ * returns 0 if successful, or a negative error code.
+ * the error code can be VX-specific, retrieved via vx_get_error().
+ * 
+ * this function doesn't call spinlock at all.
+ */
+int vx_send_msg_nolock(vx_core_t *chip, struct vx_rmh *rmh)
+{
+	int i, err;
+	
+	if (chip->chip_status & VX_STAT_IS_STALE)
+		return -EBUSY;
+
+	if ((err = vx_reset_chk(chip)) < 0) {
+		snd_printd(KERN_DEBUG "vx_send_msg: vx_reset_chk error\n");
+		return err;
+	}
+
+#if 0
+	printk(KERN_DEBUG "rmh: cmd = 0x%06x, length = %d, stype = %d\n",
+	       rmh->Cmd[0], rmh->LgCmd, rmh->DspStat);
+	if (rmh->LgCmd > 1) {
+		printk(KERN_DEBUG "  ");
+		for (i = 1; i < rmh->LgCmd; i++)
+			printk("0x%06x ", rmh->Cmd[i]);
+		printk("\n");
+	}
+#endif
+	/* Check bit M is set according to length of the command */
+	if (rmh->LgCmd > 1)
+		rmh->Cmd[0] |= MASK_MORE_THAN_1_WORD_COMMAND;
+	else
+		rmh->Cmd[0] &= MASK_1_WORD_COMMAND;
+
+	/* Wait for TX empty */
+	if ((err = vx_wait_isr_bit(chip, ISR_TX_EMPTY)) < 0) {
+		snd_printd(KERN_DEBUG "vx_send_msg: wait tx empty error\n");
+		return err;
+	}
+
+	/* Write Cmd[0] */
+	vx_outb(chip, TXH, (rmh->Cmd[0] >> 16) & 0xff);
+	vx_outb(chip, TXM, (rmh->Cmd[0] >> 8) & 0xff);
+	vx_outb(chip, TXL, rmh->Cmd[0] & 0xff);
+
+	/* Trigger irq MESSAGE */
+	if ((err = vx_send_irq_dsp(chip, IRQ_MESSAGE)) < 0) {
+		snd_printd(KERN_DEBUG "vx_send_msg: send IRQ_MESSAGE error\n");
+		return err;
+	}
+
+	/* Wait for CHK = 1 */
+	if ((err = vx_wait_isr_bit(chip, ISR_CHK)) < 0)
+		return err;
+
+	/* If error, get error value from RX */
+	if (vx_inb(chip, ISR) & ISR_ERR) {
+		if ((err = vx_wait_for_rx_full(chip)) < 0) {
+			snd_printd(KERN_DEBUG "vx_send_msg: rx_full read error\n");
+			return err;
+		}
+		err = vx_inb(chip, RXH) << 16;
+		err |= vx_inb(chip, RXM) << 8;
+		err |= vx_inb(chip, RXL);
+		snd_printd(KERN_DEBUG "msg got error = 0x%x at cmd[0]\n", err);
+		err = -(VX_ERR_MASK | err);
+		return err;
+	}
+
+	/* Send the other words */
+	if (rmh->LgCmd > 1) {
+		for (i = 1; i < rmh->LgCmd; i++) {
+			/* Wait for TX ready */
+			if ((err = vx_wait_isr_bit(chip, ISR_TX_READY)) < 0) {
+				snd_printd(KERN_DEBUG "vx_send_msg: tx_ready error\n");
+				return err;
+			}
+
+			/* Write Cmd[i] */
+			vx_outb(chip, TXH, (rmh->Cmd[i] >> 16) & 0xff);
+			vx_outb(chip, TXM, (rmh->Cmd[i] >> 8) & 0xff);
+			vx_outb(chip, TXL, rmh->Cmd[i] & 0xff);
+
+			/* Trigger irq MESS_READ_NEXT */
+			if ((err = vx_send_irq_dsp(chip, IRQ_MESS_READ_NEXT)) < 0) {
+				snd_printd(KERN_DEBUG "vx_send_msg: IRQ_READ_NEXT error\n");
+				return err;
+			}
+		}
+		/* Wait for TX empty */
+		if ((err = vx_wait_isr_bit(chip, ISR_TX_READY)) < 0) {
+			snd_printd(KERN_DEBUG "vx_send_msg: TX_READY error\n");
+			return err;
+		}
+		/* End of transfer */
+		err = vx_transfer_end(chip, IRQ_MESS_READ_END);
+		if (err < 0)
+			return err;
+	}
+
+	return vx_read_status(chip, rmh);
+}
+
+
+/*
+ * vx_send_msg - send a DSP message with spinlock
+ * @rmh: the rmh record to send and receive
+ *
+ * returns 0 if successful, or a negative error code.
+ * see vx_send_msg_nolock().
+ */
+int vx_send_msg(vx_core_t *chip, struct vx_rmh *rmh)
+{
+	unsigned long flags;
+	int err;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	err = vx_send_msg_nolock(chip, rmh);
+	spin_unlock_irqrestore(&chip->lock, flags);
+	return err;
+}
+
+
+/*
+ * vx_send_rih_nolock - send an RIH to xilinx
+ * @cmd: the command to send
+ *
+ * returns 0 if successful, or a negative error code.
+ * the error code can be VX-specific, retrieved via vx_get_error().
+ *
+ * this function doesn't call spinlock at all.
+ *
+ * unlike RMH, no command is sent to DSP.
+ */
+int vx_send_rih_nolock(vx_core_t *chip, int cmd)
+{
+	int err;
+
+	if (chip->chip_status & VX_STAT_IS_STALE)
+		return -EBUSY;
+
+#if 0
+	printk(KERN_DEBUG "send_rih: cmd = 0x%x\n", cmd);
+#endif
+	if ((err = vx_reset_chk(chip)) < 0)
+		return err;
+	/* send the IRQ */
+	if ((err = vx_send_irq_dsp(chip, cmd)) < 0)
+		return err;
+	/* Wait CHK = 1 */
+	if ((err = vx_wait_isr_bit(chip, ISR_CHK)) < 0)
+		return err;
+	/* If error, read RX */
+	if (vx_inb(chip, ISR) & ISR_ERR) {
+		if ((err = vx_wait_for_rx_full(chip)) < 0)
+			return err;
+		err = vx_inb(chip, RXH) << 16;
+		err |= vx_inb(chip, RXM) << 8;
+		err |= vx_inb(chip, RXL);
+		return -(VX_ERR_MASK | err);
+	}
+	return 0;
+}
+
+
+/*
+ * vx_send_rih - send an RIH with spinlock
+ * @cmd: the command to send
+ *
+ * see vx_send_rih_nolock().
+ */
+int vx_send_rih(vx_core_t *chip, int cmd)
+{
+	unsigned long flags;
+	int err;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	err = vx_send_rih_nolock(chip, cmd);
+	spin_unlock_irqrestore(&chip->lock, flags);
+	return err;
+}
+
+#define END_OF_RESET_WAIT_TIME		500	/* us */
+
+/**
+ * snd_vx_boot_xilinx - boot up the xilinx interface
+ * @boot: the boot record to load
+ */
+int snd_vx_load_boot_image(vx_core_t *chip, const struct firmware *boot)
+{
+	unsigned int i;
+	int no_fillup = vx_has_new_dsp(chip);
+
+	/* check the length of boot image */
+	snd_assert(boot->size > 0, return -EINVAL);
+	snd_assert(boot->size % 3 == 0, return -EINVAL);
+#if 0
+	{
+		/* more strict check */
+		unsigned int c = ((u32)boot->data[0] << 16) | ((u32)boot->data[1] << 8) | boot->data[2];
+		snd_assert(boot->size == (c + 2) * 3, return -EINVAL);
+	}
+#endif
+
+	/* reset dsp */
+	vx_reset_dsp(chip);
+	
+	udelay(END_OF_RESET_WAIT_TIME); /* another wait? */
+
+	/* download boot strap */
+	for (i = 0; i < 0x600; i += 3) {
+		if (i >= boot->size) {
+			if (no_fillup)
+				break;
+			if (vx_wait_isr_bit(chip, ISR_TX_EMPTY) < 0) {
+				snd_printk(KERN_ERR "dsp boot failed at %d\n", i);
+				return -EIO;
+			}
+			vx_outb(chip, TXH, 0);
+			vx_outb(chip, TXM, 0);
+			vx_outb(chip, TXL, 0);
+		} else {
+			unsigned char *image = boot->data + i;
+			if (vx_wait_isr_bit(chip, ISR_TX_EMPTY) < 0) {
+				snd_printk(KERN_ERR "dsp boot failed at %d\n", i);
+				return -EIO;
+			}
+			vx_outb(chip, TXH, image[0]);
+			vx_outb(chip, TXM, image[1]);
+			vx_outb(chip, TXL, image[2]);
+		}
+	}
+	return 0;
+}
+
+/*
+ * vx_test_irq_src - query the source of interrupts
+ *
+ * called from irq handler only
+ */
+static int vx_test_irq_src(vx_core_t *chip, unsigned int *ret)
+{
+	int err;
+
+	vx_init_rmh(&chip->irq_rmh, CMD_TEST_IT);
+	spin_lock(&chip->lock);
+	err = vx_send_msg_nolock(chip, &chip->irq_rmh);
+	if (err < 0)
+		*ret = 0;
+	else
+		*ret = chip->irq_rmh.Stat[0];
+	spin_unlock(&chip->lock);
+	return err;
+}
+
+
+/*
+ * vx_interrupt - soft irq handler
+ */
+static void vx_interrupt(unsigned long private_data)
+{
+	vx_core_t *chip = (vx_core_t *) private_data;
+	unsigned int events;
+		
+	if (chip->chip_status & VX_STAT_IS_STALE)
+		return;
+
+	if (vx_test_irq_src(chip, &events) < 0)
+		return;
+    
+#if 0
+	if (events & 0x000800)
+		printk(KERN_ERR "DSP Stream underrun ! IRQ events = 0x%x\n", events);
+#endif
+	// printk(KERN_DEBUG "IRQ events = 0x%x\n", events);
+
+	/* We must prevent any application using this DSP
+	 * and block any further request until the application
+	 * either unregisters or reloads the DSP
+	 */
+	if (events & FATAL_DSP_ERROR) {
+		snd_printk(KERN_ERR "vx_core: fatal DSP error!!\n");
+		return;
+	}
+
+	/* The start on time code conditions are filled (ie the time code
+	 * received by the board is equal to one of those given to it).
+	 */
+	if (events & TIME_CODE_EVENT_PENDING)
+		; /* so far, nothing to do yet */
+
+	/* The frequency has changed on the board (UER mode). */
+	if (events & FREQUENCY_CHANGE_EVENT_PENDING)
+		vx_change_frequency(chip);
+
+	/* update the pcm streams */
+	vx_pcm_update_intr(chip, events);
+}
+
+
+/**
+ * snd_vx_irq_handler - interrupt handler
+ */
+irqreturn_t snd_vx_irq_handler(int irq, void *dev, struct pt_regs *regs)
+{
+	vx_core_t *chip = dev;
+
+	if (! (chip->chip_status & VX_STAT_CHIP_INIT) ||
+	    (chip->chip_status & VX_STAT_IS_STALE))
+		return IRQ_NONE;
+	if (! vx_test_and_ack(chip))
+		tasklet_hi_schedule(&chip->tq);
+	return IRQ_HANDLED;
+}
+
+
+/*
+ */
+static void vx_reset_board(vx_core_t *chip, int cold_reset)
+{
+	snd_assert(chip->ops->reset_board, return);
+
+	/* current source, later sync'ed with target */
+	chip->audio_source = VX_AUDIO_SRC_LINE;
+	if (cold_reset) {
+		chip->audio_source_target = chip->audio_source;
+		chip->clock_source = INTERNAL_QUARTZ;
+		chip->clock_mode = VX_CLOCK_MODE_AUTO;
+		chip->freq = 48000;
+		chip->uer_detected = VX_UER_MODE_NOT_PRESENT;
+		chip->uer_bits = SNDRV_PCM_DEFAULT_CON_SPDIF;
+	}
+
+	chip->ops->reset_board(chip, cold_reset);
+
+	vx_reset_codec(chip, cold_reset);
+
+	vx_set_internal_clock(chip, chip->freq);
+
+	/* Reset the DSP */
+	vx_reset_dsp(chip);
+
+	if (vx_is_pcmcia(chip)) {
+		/* Acknowledge any pending IRQ and reset the MEMIRQ flag. */
+		vx_test_and_ack(chip);
+		vx_validate_irq(chip, 1);
+	}
+
+	/* init CBits */
+	vx_set_iec958_status(chip, chip->uer_bits);
+}
+
+
+/*
+ * proc interface
+ */
+
+static void vx_proc_read(snd_info_entry_t *entry, snd_info_buffer_t *buffer)
+{
+	vx_core_t *chip = entry->private_data;
+	static char *audio_src_vxp[] = { "Line", "Mic", "Digital" };
+	static char *audio_src_vx2[] = { "Analog", "Analog", "Digital" };
+	static char *clock_mode[] = { "Auto", "Internal", "External" };
+	static char *clock_src[] = { "Internal", "External" };
+	static char *uer_type[] = { "Consumer", "Professional", "Not Present" };
+	
+	snd_iprintf(buffer, "%s\n", chip->card->longname);
+	snd_iprintf(buffer, "Xilinx Firmware: %s\n",
+		    chip->chip_status & VX_STAT_XILINX_LOADED ? "Loaded" : "No");
+	snd_iprintf(buffer, "Device Initialized: %s\n",
+		    chip->chip_status & VX_STAT_DEVICE_INIT ? "Yes" : "No");
+	snd_iprintf(buffer, "DSP audio info:");
+	if (chip->audio_info & VX_AUDIO_INFO_REAL_TIME)
+		snd_iprintf(buffer, " realtime");
+	if (chip->audio_info & VX_AUDIO_INFO_OFFLINE)
+		snd_iprintf(buffer, " offline");
+	if (chip->audio_info & VX_AUDIO_INFO_MPEG1)
+		snd_iprintf(buffer, " mpeg1");
+	if (chip->audio_info & VX_AUDIO_INFO_MPEG2)
+		snd_iprintf(buffer, " mpeg2");
+	if (chip->audio_info & VX_AUDIO_INFO_LINEAR_8)
+		snd_iprintf(buffer, " linear8");
+	if (chip->audio_info & VX_AUDIO_INFO_LINEAR_16)
+		snd_iprintf(buffer, " linear16");
+	if (chip->audio_info & VX_AUDIO_INFO_LINEAR_24)
+		snd_iprintf(buffer, " linear24");
+	snd_iprintf(buffer, "\n");
+	snd_iprintf(buffer, "Input Source: %s\n", vx_is_pcmcia(chip) ?
+		    audio_src_vxp[chip->audio_source] :
+		    audio_src_vx2[chip->audio_source]);
+	snd_iprintf(buffer, "Clock Mode: %s\n", clock_mode[chip->clock_mode]);
+	snd_iprintf(buffer, "Clock Source: %s\n", clock_src[chip->clock_source]);
+	snd_iprintf(buffer, "Frequency: %d\n", chip->freq);
+	snd_iprintf(buffer, "Detected Frequency: %d\n", chip->freq_detected);
+	snd_iprintf(buffer, "Detected UER type: %s\n", uer_type[chip->uer_detected]);
+	snd_iprintf(buffer, "Min/Max/Cur IBL: %d/%d/%d (granularity=%d)\n",
+		    chip->ibl.min_size, chip->ibl.max_size, chip->ibl.size,
+		    chip->ibl.granularity);
+}
+
+static void vx_proc_init(vx_core_t *chip)
+{
+	snd_info_entry_t *entry;
+
+	if (! snd_card_proc_new(chip->card, "vx-status", &entry))
+		snd_info_set_text_ops(entry, chip, 1024, vx_proc_read);
+}
+
+
+/**
+ * snd_vx_dsp_boot - load the DSP boot
+ */
+int snd_vx_dsp_boot(vx_core_t *chip, const struct firmware *boot)
+{
+	int err;
+	int cold_reset = !(chip->chip_status & VX_STAT_DEVICE_INIT);
+
+	vx_reset_board(chip, cold_reset);
+	vx_validate_irq(chip, 0);
+
+	if ((err = snd_vx_load_boot_image(chip, boot)) < 0)
+		return err;
+	snd_vx_delay(chip, 10);
+
+	return 0;
+}
+
+/**
+ * snd_vx_dsp_load - load the DSP image
+ */
+int snd_vx_dsp_load(vx_core_t *chip, const struct firmware *dsp)
+{
+	unsigned int i;
+	int err;
+	unsigned int csum = 0;
+	unsigned char *image, *cptr;
+
+	snd_assert(dsp->size % 3 == 0, return -EINVAL);
+
+	vx_toggle_dac_mute(chip, 1);
+
+	/* Transfert data buffer from PC to DSP */
+	for (i = 0; i < dsp->size; i += 3) {
+		image = dsp->data + i;
+		/* Wait DSP ready for a new read */
+		if ((err = vx_wait_isr_bit(chip, ISR_TX_EMPTY)) < 0) {
+			printk("dsp loading error at position %d\n", i);
+			return err;
+		}
+		cptr = image;
+		csum ^= *cptr;
+		csum = (csum >> 24) | (csum << 8);
+		vx_outb(chip, TXH, *cptr++);
+		csum ^= *cptr;
+		csum = (csum >> 24) | (csum << 8);
+		vx_outb(chip, TXM, *cptr++);
+		csum ^= *cptr;
+		csum = (csum >> 24) | (csum << 8);
+		vx_outb(chip, TXL, *cptr++);
+	}
+	snd_printdd(KERN_DEBUG "checksum = 0x%08x\n", csum);
+
+	snd_vx_delay(chip, 200);
+
+	if ((err = vx_wait_isr_bit(chip, ISR_CHK)) < 0)
+		return err;
+
+	vx_toggle_dac_mute(chip, 0);
+
+	vx_test_and_ack(chip);
+	vx_validate_irq(chip, 1);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+/*
+ * suspend
+ */
+static int snd_vx_suspend(snd_card_t *card, pm_message_t state)
+{
+	vx_core_t *chip = card->pm_private_data;
+	unsigned int i;
+
+	snd_assert(chip, return -EINVAL);
+
+	chip->chip_status |= VX_STAT_IN_SUSPEND;
+	for (i = 0; i < chip->hw->num_codecs; i++)
+		snd_pcm_suspend_all(chip->pcm[i]);
+
+	return 0;
+}
+
+/*
+ * resume
+ */
+static int snd_vx_resume(snd_card_t *card)
+{
+	vx_core_t *chip = card->pm_private_data;
+	int i, err;
+
+	snd_assert(chip, return -EINVAL);
+
+	chip->chip_status &= ~VX_STAT_CHIP_INIT;
+
+	for (i = 0; i < 4; i++) {
+		if (! chip->firmware[i])
+			continue;
+		err = chip->ops->load_dsp(chip, i, chip->firmware[i]);
+		if (err < 0) {
+			snd_printk(KERN_ERR "vx: firmware resume error at DSP %d\n", i);
+			return -EIO;
+		}
+	}
+
+	chip->chip_status |= VX_STAT_CHIP_INIT;
+	chip->chip_status &= ~VX_STAT_IN_SUSPEND;
+
+	return 0;
+}
+
+#endif
+
+/**
+ * snd_vx_create - constructor for vx_core_t
+ * @hw: hardware specific record
+ *
+ * this function allocates the instance and prepare for the hardware
+ * initialization.
+ *
+ * return the instance pointer if successful, NULL in error.
+ */
+vx_core_t *snd_vx_create(snd_card_t *card, struct snd_vx_hardware *hw,
+			 struct snd_vx_ops *ops,
+			 int extra_size)
+{
+	vx_core_t *chip;
+
+	snd_assert(card && hw && ops, return NULL);
+
+	chip = kcalloc(1, sizeof(*chip) + extra_size, GFP_KERNEL);
+	if (! chip) {
+		snd_printk(KERN_ERR "vx_core: no memory\n");
+		return NULL;
+	}
+	spin_lock_init(&chip->lock);
+	spin_lock_init(&chip->irq_lock);
+	chip->irq = -1;
+	chip->hw = hw;
+	chip->type = hw->type;
+	chip->ops = ops;
+	tasklet_init(&chip->tq, vx_interrupt, (unsigned long)chip);
+	init_MUTEX(&chip->mixer_mutex);
+
+	chip->card = card;
+	card->private_data = chip;
+	strcpy(card->driver, hw->name);
+	sprintf(card->shortname, "Digigram %s", hw->name);
+
+	snd_card_set_pm_callback(card, snd_vx_suspend, snd_vx_resume, chip);
+
+	vx_proc_init(chip);
+
+	return chip;
+}
+
+/*
+ * module entries
+ */
+static int __init alsa_vx_core_init(void)
+{
+	return 0;
+}
+
+static void __exit alsa_vx_core_exit(void)
+{
+}
+
+module_init(alsa_vx_core_init)
+module_exit(alsa_vx_core_exit)
+
+/*
+ * exports
+ */
+EXPORT_SYMBOL(snd_vx_check_reg_bit);
+EXPORT_SYMBOL(snd_vx_create);
+EXPORT_SYMBOL(snd_vx_setup_firmware);
+EXPORT_SYMBOL(snd_vx_free_firmware);
+EXPORT_SYMBOL(snd_vx_irq_handler);
+EXPORT_SYMBOL(snd_vx_delay);
+EXPORT_SYMBOL(snd_vx_dsp_boot);
+EXPORT_SYMBOL(snd_vx_dsp_load);
+EXPORT_SYMBOL(snd_vx_load_boot_image);