Merge tag 'please-pull-ia64_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux

Pull ia64 updates from Tony Luck:
 "The big change here is removal of support for SGI Altix"

* tag 'please-pull-ia64_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: (33 commits)
  genirq: remove the is_affinity_mask_valid hook
  ia64: remove CONFIG_SWIOTLB ifdefs
  ia64: remove support for machvecs
  ia64: move the screen_info setup to common code
  ia64: move the ROOT_DEV setup to common code
  ia64: rework iommu probing
  ia64: remove the unused sn_coherency_id symbol
  ia64: remove the SGI UV simulator support
  ia64: remove the zx1 swiotlb machvec
  ia64: remove CONFIG_ACPI ifdefs
  ia64: remove CONFIG_PCI ifdefs
  ia64: remove the hpsim platform
  ia64: remove now unused machvec indirections
  ia64: remove support for the SGI SN2 platform
  drivers: remove the SGI SN2 IOC4 base support
  drivers: remove the SGI SN2 IOC3 base support
  qla2xxx: remove SGI SN2 support
  qla1280: remove SGI SN2 support
  misc/sgi-xp: remove SGI SN2 support
  char/mspec: remove SGI SN2 support
  ...

2 files changed, 0 insertions, 185 deletions

diff --git a/include/linux/ioc4.h b/include/linux/ioc4.h
deleted file mode 100644
index 51e2b9fb6372..000000000000
--- a/include/linux/ioc4.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2005 Silicon Graphics, Inc.  All Rights Reserved.
- */
-
-#ifndef _LINUX_IOC4_H
-#define _LINUX_IOC4_H
-
-#include <linux/interrupt.h>
-
-/***************
- * Definitions *
- ***************/
-
-/* Miscellaneous values inherent to hardware */
-
-#define IOC4_EXTINT_COUNT_DIVISOR 520	/* PCI clocks per COUNT tick */
-
-/***********************************
- * Structures needed by subdrivers *
- ***********************************/
-
-/* This structure fully describes the IOC4 miscellaneous registers which
- * appear at bar[0]+0x00000 through bar[0]+0x0005c.  The corresponding
- * PCI resource is managed by the main IOC4 driver because it contains
- * registers of interest to many different IOC4 subdrivers.
- */
-struct ioc4_misc_regs {
-	/* Miscellaneous IOC4 registers */
-	union ioc4_pci_err_addr_l {
-		uint32_t raw;
-		struct {
-			uint32_t valid:1;	/* Address captured */
-			uint32_t master_id:4;	/* Unit causing error
-						 * 0/1: Serial port 0 TX/RX
-						 * 2/3: Serial port 1 TX/RX
-						 * 4/5: Serial port 2 TX/RX
-						 * 6/7: Serial port 3 TX/RX
-						 * 8: ATA/ATAPI
-						 * 9-15: Undefined
-						 */
-			uint32_t mul_err:1;	/* Multiple errors occurred */
-			uint32_t addr:26;	/* Bits 31-6 of error addr */
-		} fields;
-	} pci_err_addr_l;
-	uint32_t pci_err_addr_h;	/* Bits 63-32 of error addr */
-	union ioc4_sio_int {
-		uint32_t raw;
-		struct {
-			uint8_t tx_mt:1;	/* TX ring buffer empty */
-			uint8_t rx_full:1;	/* RX ring buffer full */
-			uint8_t rx_high:1;	/* RX high-water exceeded */
-			uint8_t rx_timer:1;	/* RX timer has triggered */
-			uint8_t delta_dcd:1;	/* DELTA_DCD seen */
-			uint8_t delta_cts:1;	/* DELTA_CTS seen */
-			uint8_t intr_pass:1;	/* Interrupt pass-through */
-			uint8_t tx_explicit:1;	/* TX, MCW, or delay complete */
-		} fields[4];
-	} sio_ir;		/* Serial interrupt state */
-	union ioc4_other_int {
-		uint32_t raw;
-		struct {
-			uint32_t ata_int:1;	/* ATA port passthru */
-			uint32_t ata_memerr:1;	/* ATA halted by mem error */
-			uint32_t memerr:4;	/* Serial halted by mem err */
-			uint32_t kbd_int:1;	/* kbd/mouse intr asserted */
-			uint32_t reserved:16;	/* zero */
-			uint32_t rt_int:1;	/* INT_OUT section latch */
-			uint32_t gen_int:8;	/* Intr. from generic pins */
-		} fields;
-	} other_ir;		/* Other interrupt state */
-	union ioc4_sio_int sio_ies;	/* Serial interrupt enable set */
-	union ioc4_other_int other_ies;	/* Other interrupt enable set */
-	union ioc4_sio_int sio_iec;	/* Serial interrupt enable clear */
-	union ioc4_other_int other_iec;	/* Other interrupt enable clear */
-	union ioc4_sio_cr {
-		uint32_t raw;
-		struct {
-			uint32_t cmd_pulse:4;	/* Bytebus strobe width */
-			uint32_t arb_diag:3;	/* PCI bus requester */
-			uint32_t sio_diag_idle:1;	/* Active ser req? */
-			uint32_t ata_diag_idle:1;	/* Active ATA req? */
-			uint32_t ata_diag_active:1;	/* ATA req is winner */
-			uint32_t reserved:22;	/* zero */
-		} fields;
-	} sio_cr;
-	uint32_t unused1;
-	union ioc4_int_out {
-		uint32_t raw;
-		struct {
-			uint32_t count:16;	/* Period control */
-			uint32_t mode:3;	/* Output signal shape */
-			uint32_t reserved:11;	/* zero */
-			uint32_t diag:1;	/* Timebase control */
-			uint32_t int_out:1;	/* Current value */
-		} fields;
-	} int_out;		/* External interrupt output control */
-	uint32_t unused2;
-	union ioc4_gpcr {
-		uint32_t raw;
-		struct {
-			uint32_t dir:8;	/* Pin direction */
-			uint32_t edge:8;	/* Edge/level mode */
-			uint32_t reserved1:4;	/* zero */
-			uint32_t int_out_en:1;	/* INT_OUT enable */
-			uint32_t reserved2:11;	/* zero */
-		} fields;
-	} gpcr_s;		/* Generic PIO control set */
-	union ioc4_gpcr gpcr_c;	/* Generic PIO control clear */
-	union ioc4_gpdr {
-		uint32_t raw;
-		struct {
-			uint32_t gen_pin:8;	/* State of pins */
-			uint32_t reserved:24;
-		} fields;
-	} gpdr;			/* Generic PIO data */
-	uint32_t unused3;
-	union ioc4_gppr {
-		uint32_t raw;
-		struct {
-			uint32_t gen_pin:1;	/* Single pin state */
-			uint32_t reserved:31;
-		} fields;
-	} gppr[8];		/* Generic PIO pins */
-};
-
-/* Masks for GPCR DIR pins */
-#define IOC4_GPCR_DIR_0 0x01	/* External interrupt output */
-#define IOC4_GPCR_DIR_1 0x02	/* External interrupt input */
-#define IOC4_GPCR_DIR_2 0x04
-#define IOC4_GPCR_DIR_3 0x08	/* Keyboard/mouse presence */
-#define IOC4_GPCR_DIR_4 0x10	/* Ser. port 0 xcvr select (0=232, 1=422) */
-#define IOC4_GPCR_DIR_5 0x20	/* Ser. port 1 xcvr select (0=232, 1=422) */
-#define IOC4_GPCR_DIR_6 0x40	/* Ser. port 2 xcvr select (0=232, 1=422) */
-#define IOC4_GPCR_DIR_7 0x80	/* Ser. port 3 xcvr select (0=232, 1=422) */
-
-/* Masks for GPCR EDGE pins */
-#define IOC4_GPCR_EDGE_0 0x01
-#define IOC4_GPCR_EDGE_1 0x02	/* External interrupt input */
-#define IOC4_GPCR_EDGE_2 0x04
-#define IOC4_GPCR_EDGE_3 0x08
-#define IOC4_GPCR_EDGE_4 0x10
-#define IOC4_GPCR_EDGE_5 0x20
-#define IOC4_GPCR_EDGE_6 0x40
-#define IOC4_GPCR_EDGE_7 0x80
-
-#define IOC4_VARIANT_IO9	0x0900
-#define IOC4_VARIANT_PCI_RT	0x0901
-#define IOC4_VARIANT_IO10	0x1000
-
-/* One of these per IOC4 */
-struct ioc4_driver_data {
-	struct list_head idd_list;
-	unsigned long idd_bar0;
-	struct pci_dev *idd_pdev;
-	const struct pci_device_id *idd_pci_id;
-	struct ioc4_misc_regs __iomem *idd_misc_regs;
-	unsigned long count_period;
-	void *idd_serial_data;
-	unsigned int idd_variant;
-};
-
-/* One per submodule */
-struct ioc4_submodule {
-	struct list_head is_list;
-	char *is_name;
-	struct module *is_owner;
-	int (*is_probe) (struct ioc4_driver_data *);
-	int (*is_remove) (struct ioc4_driver_data *);
-};
-
-#define IOC4_NUM_CARDS		8	/* max cards per partition */
-
-/**********************************
- * Functions needed by submodules *
- **********************************/
-
-extern int ioc4_register_submodule(struct ioc4_submodule *);
-extern void ioc4_unregister_submodule(struct ioc4_submodule *);
-
-#endif				/* _LINUX_IOC4_H */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 4b97f427cc92..24486f405f12 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1071,7 +1071,6 @@
 #define PCI_VENDOR_ID_SGI		0x10a9
 #define PCI_DEVICE_ID_SGI_IOC3		0x0003
 #define PCI_DEVICE_ID_SGI_LITHIUM	0x1002
-#define PCI_DEVICE_ID_SGI_IOC4		0x100a
 
 #define PCI_VENDOR_ID_WINBOND		0x10ad
 #define PCI_DEVICE_ID_WINBOND_82C105	0x0105