diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-01-27 10:30:42 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-01-27 10:30:42 -0800 |
commit | 9e1af7567b266dc6c3c8fd434ea807b3206bfdc1 (patch) | |
tree | e974d528b749466203dfdd4915826300ffb88954 /drivers | |
parent | b9b627a449889e9dacfe9e7ac3cdf829a0004845 (diff) | |
parent | 533a6cfe08f96a7b5c65e06d20916d552c11b256 (diff) |
Merge tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"There are no updates for the MEMSTICK subsystem this time. But note
that I am also carrying a patch from the pinctrl tree, which has been
shared through an immutable branch.
Summary:
MMC core:
- Convert to reasonable timeouts for all CMD6 commands (updates for
BKOPS, CACHE_FLUSH and INAND_CMD38_ARG_EXT_CSD) for eMMC
- Respect f_max clock rate at card initialization
- Add gpiod_toggle_active_low() API
- Consolidate slot-gpio code by using gpiod_toggle_active_low()
MMC host:
- Add pinctrl_select_default_state() API
- Consolidate pintctrl code by using pinctrl_select_default_state()
- mmci: Support any block sizes for SDIO for some variants
- mmci: Enable reset control for stm32_sdmmc
- mmc_spi: Toggle SPI_CS_HIGH polarity rather than hard-coding it
- renesas_sdhi: Add support for the r8a77961 variant
- renesas_sdhi: A few minor improvements
- rockchip-dw-mshc: Add support for the rk3308 variant
- sdhci: Enable support for external DMA controllers
- sdhci: Fixup error path when sending CMD12
- sdhci-brcmstb: Add support for 7216b0 variant
- sdhci-brcmstb: Add support for command queuing (CQHCI)
- sdhci-brcmstb: Add support for eMMC HS400ES mode
- sdhci-msm: Add support for the sc7180 variant
- sdhci-msm: Add support for command queuing (CQHCI)
- sdhci-of-at91: Add support for the SAM9x60 variant
- sdhci-of-at91: Improve support for tunings
- sdhci-of-esdhc: A few fixups for some clock related issues
- sdhci-omap: Add support for the am335x and the am437x variants
- sdhci-omap: Improve support for erase operations
- sdhci-omap: Add support for external DMA"
* tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (89 commits)
mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch()
mmc: block: Use generic_cmd6_time when modifying INAND_CMD38_ARG_EXT_CSD
mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC
mmc: sdhci-cadence: remove unneeded 'inline' marker
dt-bindings: mmc: rockchip-dw-mshc: add description for rk3308
dt-bindings: mmc: convert rockchip dw-mshc bindings to yaml
dt-bindings: mmc: convert synopsys dw-mshc bindings to yaml
mmc: sdhci-msm: Add CQHCI support for sdhci-msm
mmc: sdhci: Let a vendor driver supply and update ADMA descriptor size
mmc: sdhci-of-esdhc: fix serious issue clock is always disabled
mmc: sdhci-of-esdhc: fix transfer mode register reading
mmc: sdhci-brcmstb: Fix incorrect switch to HS mode
mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)
mmc: sdhci-brcmstb: Add shutdown callback
mmc: sdhci-brcmstb: Fix driver to defer on clk_get defer
mmc: sdhci-brcmstb: Add ability to use HS400ES transfer mode
dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 7216b0
mmc: core: limit probe clock frequency to configured f_max
mmc: sdhci-milbeaut: Remove redundant platform_get_irq error message
mmc: sdhci: fix an issue of mixing different types
...
Diffstat (limited to 'drivers')
54 files changed, 1316 insertions, 549 deletions
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index b696e4598a24..1b3f217a35e2 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -132,27 +132,6 @@ static void of_gpio_flags_quirks(struct device_node *np, int index) { /* - * Handle MMC "cd-inverted" and "wp-inverted" semantics. - */ - if (IS_ENABLED(CONFIG_MMC)) { - /* - * Active low is the default according to the - * SDHCI specification and the device tree - * bindings. However the code in the current - * kernel was written such that the phandle - * flags were always respected, and "cd-inverted" - * would invert the flag from the device phandle. - */ - if (!strcmp(propname, "cd-gpios")) { - if (of_property_read_bool(np, "cd-inverted")) - *flags ^= OF_GPIO_ACTIVE_LOW; - } - if (!strcmp(propname, "wp-gpios")) { - if (of_property_read_bool(np, "wp-inverted")) - *flags ^= OF_GPIO_ACTIVE_LOW; - } - } - /* * Some GPIO fixed regulator quirks. * Note that active low is the default. */ diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 78a16e42f222..bcfbfded9ba3 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -3371,6 +3371,17 @@ int gpiod_is_active_low(const struct gpio_desc *desc) } EXPORT_SYMBOL_GPL(gpiod_is_active_low); +/** + * gpiod_toggle_active_low - toggle whether a GPIO is active-low or not + * @desc: the gpio descriptor to change + */ +void gpiod_toggle_active_low(struct gpio_desc *desc) +{ + VALIDATE_DESC_VOID(desc); + change_bit(FLAG_ACTIVE_LOW, &desc->flags); +} +EXPORT_SYMBOL_GPL(gpiod_toggle_active_low); + /* I/O calls are only valid after configuration completed; the relevant * "is this a valid GPIO" error checks should already have been done. * diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 95b41c0891d0..663d87924e5e 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -1107,7 +1107,7 @@ static void mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req) card->erase_arg == MMC_TRIM_ARG ? INAND_CMD38_ARG_TRIM : INAND_CMD38_ARG_ERASE, - 0); + card->ext_csd.generic_cmd6_time); } if (!err) err = mmc_erase(card, from, nr, card->erase_arg); @@ -1149,7 +1149,7 @@ retry: arg == MMC_SECURE_TRIM1_ARG ? INAND_CMD38_ARG_SECTRIM1 : INAND_CMD38_ARG_SECERASE, - 0); + card->ext_csd.generic_cmd6_time); if (err) goto out_retry; } @@ -1167,7 +1167,7 @@ retry: err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, INAND_CMD38_ARG_EXT_CSD, INAND_CMD38_ARG_SECTRIM2, - 0); + card->ext_csd.generic_cmd6_time); if (err) goto out_retry; } diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index abf8f5eb0a1c..aa54d359dab7 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2330,7 +2330,13 @@ void mmc_rescan(struct work_struct *work) } for (i = 0; i < ARRAY_SIZE(freqs); i++) { - if (!mmc_rescan_try_freq(host, max(freqs[i], host->f_min))) + unsigned int freq = freqs[i]; + if (freq > host->f_max) { + if (i + 1 < ARRAY_SIZE(freqs)) + continue; + freq = host->f_max; + } + if (!mmc_rescan_try_freq(host, max(freq, host->f_min))) break; if (freqs[i] <= host->f_min) break; @@ -2344,7 +2350,7 @@ void mmc_rescan(struct work_struct *work) void mmc_start_host(struct mmc_host *host) { - host->f_init = max(freqs[0], host->f_min); + host->f_init = max(min(freqs[0], host->f_max), host->f_min); host->rescan_disable = 0; host->ios.power_mode = MMC_POWER_UNDEFINED; diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 105b7a7c0251..c8768726d925 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -175,8 +175,6 @@ int mmc_of_parse(struct mmc_host *host) struct device *dev = host->parent; u32 bus_width, drv_type, cd_debounce_delay_ms; int ret; - bool cd_cap_invert, cd_gpio_invert = false; - bool ro_cap_invert, ro_gpio_invert = false; if (!dev || !dev_fwnode(dev)) return 0; @@ -219,10 +217,12 @@ int mmc_of_parse(struct mmc_host *host) */ /* Parse Card Detection */ + if (device_property_read_bool(dev, "non-removable")) { host->caps |= MMC_CAP_NONREMOVABLE; } else { - cd_cap_invert = device_property_read_bool(dev, "cd-inverted"); + if (device_property_read_bool(dev, "cd-inverted")) + host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; if (device_property_read_u32(dev, "cd-debounce-delay-ms", &cd_debounce_delay_ms)) @@ -232,32 +232,19 @@ int mmc_of_parse(struct mmc_host *host) host->caps |= MMC_CAP_NEEDS_POLL; ret = mmc_gpiod_request_cd(host, "cd", 0, false, - cd_debounce_delay_ms * 1000, - &cd_gpio_invert); + cd_debounce_delay_ms * 1000); if (!ret) dev_info(host->parent, "Got CD GPIO\n"); else if (ret != -ENOENT && ret != -ENOSYS) return ret; - - /* - * There are two ways to flag that the CD line is inverted: - * through the cd-inverted flag and by the GPIO line itself - * being inverted from the GPIO subsystem. This is a leftover - * from the times when the GPIO subsystem did not make it - * possible to flag a line as inverted. - * - * If the capability on the host AND the GPIO line are - * both inverted, the end result is that the CD line is - * not inverted. - */ - if (cd_cap_invert ^ cd_gpio_invert) - host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; } /* Parse Write Protection */ - ro_cap_invert = device_property_read_bool(dev, "wp-inverted"); - ret = mmc_gpiod_request_ro(host, "wp", 0, 0, &ro_gpio_invert); + if (device_property_read_bool(dev, "wp-inverted")) + host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; + + ret = mmc_gpiod_request_ro(host, "wp", 0, 0); if (!ret) dev_info(host->parent, "Got WP GPIO\n"); else if (ret != -ENOENT && ret != -ENOSYS) @@ -266,10 +253,6 @@ int mmc_of_parse(struct mmc_host *host) if (device_property_read_bool(dev, "disable-wp")) host->caps2 |= MMC_CAP2_NO_WRITE_PROTECT; - /* See the comment on CD inversion above */ - if (ro_cap_invert ^ ro_gpio_invert) - host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; - if (device_property_read_bool(dev, "cap-sd-highspeed")) host->caps |= MMC_CAP_SD_HIGHSPEED; if (device_property_read_bool(dev, "cap-mmc-highspeed")) diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 09113b9ad679..da425ee2d9bf 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -19,7 +19,9 @@ #include "host.h" #include "mmc_ops.h" -#define MMC_OPS_TIMEOUT_MS (10 * 60 * 1000) /* 10 minute timeout */ +#define MMC_OPS_TIMEOUT_MS (10 * 60 * 1000) /* 10min*/ +#define MMC_BKOPS_TIMEOUT_MS (120 * 1000) /* 120s */ +#define MMC_CACHE_FLUSH_TIMEOUT_MS (30 * 1000) /* 30s */ static const u8 tuning_blk_pattern_4bit[] = { 0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc, @@ -458,10 +460,6 @@ static int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms, bool expired = false; bool busy = false; - /* We have an unspecified cmd timeout, use the fallback value. */ - if (!timeout_ms) - timeout_ms = MMC_OPS_TIMEOUT_MS; - /* * In cases when not allowed to poll by using CMD13 or because we aren't * capable of polling by using ->card_busy(), then rely on waiting the @@ -534,14 +532,19 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, mmc_retune_hold(host); + if (!timeout_ms) { + pr_warn("%s: unspecified timeout for CMD6 - use generic\n", + mmc_hostname(host)); + timeout_ms = card->ext_csd.generic_cmd6_time; + } + /* - * If the cmd timeout and the max_busy_timeout of the host are both - * specified, let's validate them. A failure means we need to prevent - * the host from doing hw busy detection, which is done by converting - * to a R1 response instead of a R1B. + * If the max_busy_timeout of the host is specified, make sure it's + * enough to fit the used timeout_ms. In case it's not, let's instruct + * the host to avoid HW busy detection, by converting to a R1 response + * instead of a R1B. */ - if (timeout_ms && host->max_busy_timeout && - (timeout_ms > host->max_busy_timeout)) + if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout)) use_r1b_resp = false; cmd.opcode = MMC_SWITCH; @@ -552,10 +555,6 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, cmd.flags = MMC_CMD_AC; if (use_r1b_resp) { cmd.flags |= MMC_RSP_SPI_R1B | MMC_RSP_R1B; - /* - * A busy_timeout of zero means the host can decide to use - * whatever value it finds suitable. - */ cmd.busy_timeout = timeout_ms; } else { cmd.flags |= MMC_RSP_SPI_R1 | MMC_RSP_R1; @@ -941,7 +940,7 @@ void mmc_run_bkops(struct mmc_card *card) * urgent levels by using an asynchronous background task, when idle. */ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_BKOPS_START, 1, MMC_OPS_TIMEOUT_MS); + EXT_CSD_BKOPS_START, 1, MMC_BKOPS_TIMEOUT_MS); if (err) pr_warn("%s: Error %d starting bkops\n", mmc_hostname(card->host), err); @@ -961,7 +960,8 @@ int mmc_flush_cache(struct mmc_card *card) (card->ext_csd.cache_size > 0) && (card->ext_csd.cache_ctrl & 1)) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_FLUSH_CACHE, 1, 0); + EXT_CSD_FLUSH_CACHE, 1, + MMC_CACHE_FLUSH_TIMEOUT_MS); if (err) pr_err("%s: cache flush error %d\n", mmc_hostname(card->host), err); diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c index da2596c5fa28..05e907451df9 100644 --- a/drivers/mmc/core/slot-gpio.c +++ b/drivers/mmc/core/slot-gpio.c @@ -19,7 +19,6 @@ struct mmc_gpio { struct gpio_desc *ro_gpio; struct gpio_desc *cd_gpio; - bool override_cd_active_level; irqreturn_t (*cd_gpio_isr)(int irq, void *dev_id); char *ro_label; char *cd_label; @@ -80,13 +79,6 @@ int mmc_gpio_get_cd(struct mmc_host *host) return -ENOSYS; cansleep = gpiod_cansleep(ctx->cd_gpio); - if (ctx->override_cd_active_level) { - int value = cansleep ? - gpiod_get_raw_value_cansleep(ctx->cd_gpio) : - gpiod_get_raw_value(ctx->cd_gpio); - return !value ^ !!(host->caps2 & MMC_CAP2_CD_ACTIVE_HIGH); - } - return cansleep ? gpiod_get_value_cansleep(ctx->cd_gpio) : gpiod_get_value(ctx->cd_gpio); @@ -168,8 +160,6 @@ EXPORT_SYMBOL(mmc_gpio_set_cd_isr); * @idx: index of the GPIO to obtain in the consumer * @override_active_level: ignore %GPIO_ACTIVE_LOW flag * @debounce: debounce time in microseconds - * @gpio_invert: will return whether the GPIO line is inverted or not, set - * to NULL to ignore * * Note that this must be called prior to mmc_add_host() * otherwise the caller must also call mmc_gpiod_request_cd_irq(). @@ -178,7 +168,7 @@ EXPORT_SYMBOL(mmc_gpio_set_cd_isr); */ int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id, unsigned int idx, bool override_active_level, - unsigned int debounce, bool *gpio_invert) + unsigned int debounce) { struct mmc_gpio *ctx = host->slot.handler_priv; struct gpio_desc *desc; @@ -194,10 +184,14 @@ int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id, ctx->cd_debounce_delay_ms = debounce / 1000; } - if (gpio_invert) - *gpio_invert = !gpiod_is_active_low(desc); + /* override forces default (active-low) polarity ... */ + if (override_active_level && !gpiod_is_active_low(desc)) + gpiod_toggle_active_low(desc); + + /* ... or active-high */ + if (host->caps2 & MMC_CAP2_CD_ACTIVE_HIGH) + gpiod_toggle_active_low(desc); - ctx->override_cd_active_level = override_active_level; ctx->cd_gpio = desc; return 0; @@ -218,14 +212,11 @@ EXPORT_SYMBOL(mmc_can_gpio_cd); * @con_id: function within the GPIO consumer * @idx: index of the GPIO to obtain in the consumer * @debounce: debounce time in microseconds - * @gpio_invert: will return whether the GPIO line is inverted or not, - * set to NULL to ignore * * Returns zero on success, else an error. */ int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id, - unsigned int idx, - unsigned int debounce, bool *gpio_invert) + unsigned int idx, unsigned int debounce) { struct mmc_gpio *ctx = host->slot.handler_priv; struct gpio_desc *desc; @@ -241,8 +232,8 @@ int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id, return ret; } - if (gpio_invert) - *gpio_invert = !gpiod_is_active_low(desc); + if (host->caps2 & MMC_CAP2_RO_ACTIVE_HIGH) + gpiod_toggle_active_low(desc); ctx->ro_gpio = desc; diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index d06b2dfe3c95..3a5089f0332c 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -501,6 +501,7 @@ config MMC_SDHCI_MSM depends on ARCH_QCOM || (ARM && COMPILE_TEST) depends on MMC_SDHCI_PLTFM select MMC_SDHCI_IO_ACCESSORS + select MMC_CQHCI help This selects the Secure Digital Host Controller Interface (SDHCI) support present in Qualcomm SOCs. The controller supports @@ -990,6 +991,7 @@ config MMC_SDHCI_BRCMSTB tristate "Broadcom SDIO/SD/MMC support" depends on ARCH_BRCMSTB || BMIPS_GENERIC depends on MMC_SDHCI_PLTFM + select MMC_CQHCI default y help This selects support for the SDIO/SD/MMC Host Controller on @@ -1010,6 +1012,7 @@ config MMC_SDHCI_OMAP depends on MMC_SDHCI_PLTFM && OF select THERMAL imply TI_SOC_THERMAL + select MMC_SDHCI_EXTERNAL_DMA if DMA_ENGINE help This selects the Secure Digital Host Controller Interface (SDHCI) support present in TI's DRA7 SOCs. The controller supports @@ -1040,3 +1043,6 @@ config MMC_OWL help This selects support for the SD/MMC Host Controller on Actions Semi Owl SoCs. + +config MMC_SDHCI_EXTERNAL_DMA + bool diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 6f065bb5c55a..aeaaa5314924 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -2645,7 +2645,7 @@ static int atmci_runtime_resume(struct device *dev) { struct atmel_mci *host = dev_get_drvdata(dev); - pinctrl_pm_select_default_state(dev); + pinctrl_select_default_state(dev); return clk_prepare_enable(host->mck); } diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index bc8aeb47a7b4..8823680ca42c 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -984,12 +984,9 @@ static int au1xmmc_probe(struct platform_device *pdev) goto out2; } - r = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!r) { - dev_err(&pdev->dev, "no IRQ defined\n"); + host->irq = platform_get_irq(pdev, 0); + if (host->irq < 0) goto out3; - } - host->irq = r->start; mmc->ops = &au1xmmc_ops; diff --git a/drivers/mmc/host/bcm2835.c b/drivers/mmc/host/bcm2835.c index 99f61fd2a658..c3d949847cbd 100644 --- a/drivers/mmc/host/bcm2835.c +++ b/drivers/mmc/host/bcm2835.c @@ -1393,7 +1393,17 @@ static int bcm2835_probe(struct platform_device *pdev) host->dma_chan = NULL; host->dma_desc = NULL; - host->dma_chan_rxtx = dma_request_slave_channel(dev, "rx-tx"); + host->dma_chan_rxtx = dma_request_chan(dev, "rx-tx"); + if (IS_ERR(host->dma_chan_rxtx)) { + ret = PTR_ERR(host->dma_chan_rxtx); + host->dma_chan_rxtx = NULL; + + if (ret == -EPROBE_DEFER) + goto err; + + /* Ignore errors to fall back to PIO mode */ + } + clk = devm_clk_get(dev, NULL); if (IS_ERR(clk)) { diff --git a/drivers/mmc/host/cavium-thunderx.c b/drivers/mmc/host/cavium-thunderx.c index eee08d81b242..76013bbbcff3 100644 --- a/drivers/mmc/host/cavium-thunderx.c +++ b/drivers/mmc/host/cavium-thunderx.c @@ -76,8 +76,10 @@ static int thunder_mmc_probe(struct pci_dev *pdev, return ret; host->base = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0)); - if (!host->base) - return -EINVAL; + if (!host->base) { + ret = -EINVAL; + goto error; + } /* On ThunderX these are identical */ host->dma_base = host->base; @@ -86,12 +88,14 @@ static int thunder_mmc_probe(struct pci_dev *pdev, host->reg_off_dma = 0x160; host->clk = devm_clk_get(dev, NULL); - if (IS_ERR(host->clk)) - return PTR_ERR(host->clk); + if (IS_ERR(host->clk)) { + ret = PTR_ERR(host->clk); + goto error; + } ret = clk_prepare_enable(host->clk); if (ret) - return ret; + goto error; host->sys_freq = clk_get_rate(host->clk); spin_lock_init(&host->irq_handler_lock); @@ -157,6 +161,7 @@ error: } } clk_disable_unprepare(host->clk); + pci_release_regions(pdev); return ret; } @@ -175,6 +180,7 @@ static void thunder_mmc_remove(struct pci_dev *pdev) writeq(dma_cfg, host->dma_base + MIO_EMM_DMA_CFG(host)); clk_disable_unprepare(host->clk); + pci_release_regions(pdev); } static const struct pci_device_id thunder_mmc_id_table[] = { diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c index ebfaeb33bc8c..f01fecd75833 100644 --- a/drivers/mmc/host/davinci_mmc.c +++ b/drivers/mmc/host/davinci_mmc.c @@ -1174,13 +1174,13 @@ static int mmc_davinci_parse_pdata(struct mmc_host *mmc) mmc->caps |= pdata->caps; /* Register a cd gpio, if there is not one, enable polling */ - ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL); + ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0); if (ret == -EPROBE_DEFER) return ret; else if (ret) mmc->caps |= MMC_CAP_NEEDS_POLL; - ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0, NULL); + ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0); if (ret == -EPROBE_DEFER) return ret; diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index fc9d4d000f97..bc5278ab5707 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -833,12 +833,14 @@ static int dw_mci_edmac_init(struct dw_mci *host) if (!host->dms) return -ENOMEM; - host->dms->ch = dma_request_slave_channel(host->dev, "rx-tx"); - if (!host->dms->ch) { + host->dms->ch = dma_request_chan(host->dev, "rx-tx"); + if (IS_ERR(host->dms->ch)) { + int ret = PTR_ERR(host->dms->ch); + dev_err(host->dev, "Failed to get external DMA channel.\n"); kfree(host->dms); host->dms = NULL; - return -ENXIO; + return ret; } return 0; diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c index 78383f60a3dc..fbae87d1f017 100644 --- a/drivers/mmc/host/jz4740_mmc.c +++ b/drivers/mmc/host/jz4740_mmc.c @@ -1108,7 +1108,7 @@ static int jz4740_mmc_suspend(struct device *dev) static int jz4740_mmc_resume(struct device *dev) { - return pinctrl_pm_select_default_state(dev); + return pinctrl_select_default_state(dev); } static SIMPLE_DEV_PM_OPS(jz4740_mmc_pm_ops, jz4740_mmc_suspend, diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index e712315c7e8d..35400cf2a2e4 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -161,7 +161,6 @@ struct meson_host { bool dram_access_quirk; struct pinctrl *pinctrl; - struct pinctrl_state *pins_default; struct pinctrl_state *pins_clk_gate; unsigned int bounce_buf_size; @@ -327,7 +326,7 @@ static void meson_mmc_clk_ungate(struct meson_host *host) u32 cfg; if (host->pins_clk_gate) - pinctrl_select_state(host->pinctrl, host->pins_default); + pinctrl_select_default_state(host->dev); /* Make sure the clock is not stopped in the controller */ cfg = readl(host->regs + SD_EMMC_CFG); @@ -1101,13 +1100,6 @@ static int meson_mmc_probe(struct platform_device *pdev) goto free_host; } - host->pins_default = pinctrl_lookup_state(host->pinctrl, - PINCTRL_STATE_DEFAULT); - if (IS_ERR(host->pins_default)) { - ret = PTR_ERR(host->pins_default); - goto free_host; - } - host->pins_clk_gate = pinctrl_lookup_state(host->pinctrl, "clk-gate"); if (IS_ERR(host->pins_clk_gate)) { diff --git a/drivers/mmc/host/meson-mx-sdio.c b/drivers/mmc/host/meson-mx-sdio.c index ba9a63db73da..8b038e7b2cd3 100644 --- a/drivers/mmc/host/meson-mx-sdio.c +++ b/drivers/mmc/host/meson-mx-sdio.c @@ -638,7 +638,6 @@ static int meson_mx_mmc_probe(struct platform_device *pdev) struct platform_device *slot_pdev; struct mmc_host *mmc; struct meson_mx_mmc_host *host; - struct resource *res; int ret, irq; u32 conf; @@ -663,8 +662,7 @@ static int meson_mx_mmc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, host); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - host->base = devm_ioremap_resource(host->controller_dev, res); + host->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(host->base)) { ret = PTR_ERR(host->base); goto error_free_mmc; diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 74c6cfbf9172..951f76dc1ddd 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1134,17 +1134,22 @@ static void mmc_spi_initsequence(struct mmc_spi_host *host) * SPI protocol. Another is that when chipselect is released while * the card returns BUSY status, the clock must issue several cycles * with chipselect high before the card will stop driving its output. + * + * SPI_CS_HIGH means "asserted" here. In some cases like when using + * GPIOs for chip select, SPI_CS_HIGH is set but this will be logically + * inverted by gpiolib, so if we want to ascertain to drive it high + * we should toggle the default with an XOR as we do here. */ - host->spi->mode |= SPI_CS_HIGH; + host->spi->mode ^= SPI_CS_HIGH; if (spi_setup(host->spi) != 0) { /* Just warn; most cards work without it. */ dev_warn(&host->spi->dev, "can't change chip-select polarity\n"); - host->spi->mode &= ~SPI_CS_HIGH; + host->spi->mode ^= SPI_CS_HIGH; } else { mmc_spi_readbytes(host, 18); - host->spi->mode &= ~SPI_CS_HIGH; + host->spi->mode ^= SPI_CS_HIGH; if (spi_setup(host->spi) != 0) { /* Wot, we can't get the same setup we had before? */ dev_err(&host->spi->dev, @@ -1421,7 +1426,7 @@ static int mmc_spi_probe(struct spi_device *spi) * Index 0 is card detect * Old boardfiles were specifying 1 ms as debounce */ - status = mmc_gpiod_request_cd(mmc, NULL, 0, false, 1000, NULL); + status = mmc_gpiod_request_cd(mmc, NULL, 0, false, 1000); if (status == -EPROBE_DEFER) goto fail_add_host; if (!status) { @@ -1436,7 +1441,7 @@ static int mmc_spi_probe(struct spi_device *spi) mmc_detect_change(mmc, 0); /* Index 1 is write protect/read only */ - status = mmc_gpiod_request_ro(mmc, NULL, 1, 0, NULL); + status = mmc_gpiod_request_ro(mmc, NULL, 1, 0); if (status == -EPROBE_DEFER) goto fail_add_host; if (!status) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 40e72c30ea84..e9ffce8d41ea 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -169,6 +169,8 @@ static struct variant_data variant_ux500 = { .cmdreg_srsp = MCI_CPSM_RESPONSE, .datalength_bits = 24, .datactrl_blocksz = 11, + .datactrl_any_blocksz = true, + .dma_power_of_2 = true, .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN, .st_sdio = true, .st_clkdiv = true, @@ -202,6 +204,8 @@ static struct variant_data variant_ux500v2 = { .datactrl_mask_ddrmode = MCI_DPSM_ST_DDRMODE, .datalength_bits = 24, .datactrl_blocksz = 11, + .datactrl_any_blocksz = true, + .dma_power_of_2 = true, .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN, .st_sdio = true, .st_clkdiv = true, @@ -261,6 +265,7 @@ static struct variant_data variant_stm32_sdmmc = { .datacnt_useless = true, .datalength_bits = 25, .datactrl_blocksz = 14, + .datactrl_any_blocksz = true, .stm32_idmabsize_mask = GENMASK(12, 5), .busy_timeout = true, .busy_detect = true, @@ -284,6 +289,7 @@ static struct variant_data variant_qcom = { .data_cmd_enable = MCI_CPSM_QCOM_DATCMD, .datalength_bits = 24, .datactrl_blocksz = 11, + .datactrl_any_blocksz = true, .pwrreg_powerup = MCI_PWR_UP, .f_max = 208000000, .explicit_mclk_control = true, @@ -452,10 +458,11 @@ static void mmci_dma_setup(struct mmci_host *host) static int mmci_validate_data(struct mmci_host *host, struct mmc_data *data) { + struct variant_data *variant = host->variant; + if (!data) return 0; - - if (!is_power_of_2(data->blksz)) { + if (!is_power_of_2(data->blksz) && !variant->datactrl_any_blocksz) { dev_err(mmc_dev(host->mmc), "unsupported block size (%d bytes)\n", data->blksz); return -EINVAL; @@ -520,7 +527,9 @@ static int mmci_dma_start(struct mmci_host *host, unsigned int datactrl) "Submit MMCI DMA job, sglen %d blksz %04x blks %04x flags %08x\n", data->sg_len, data->blksz, data->blocks, data->flags); - host->ops->dma_start(host, &datactrl); + ret = host->ops->dma_start(host, &datactrl); + if (ret) + return ret; /* Trigger the DMA transfer */ mmci_write_datactrlreg(host, datactrl); @@ -706,10 +715,20 @@ int mmci_dmae_setup(struct mmci_host *host) host->dma_priv = dmae; - dmae->rx_channel = dma_request_slave_channel(mmc_dev(host->mmc), - "rx"); - dmae->tx_channel = dma_request_slave_channel(mmc_dev(host->mmc), - "tx"); + dmae->rx_channel = dma_request_chan(mmc_dev(host->mmc), "rx"); + if (IS_ERR(dmae->rx_channel)) { + int ret = PTR_ERR(dmae->rx_channel); + dmae->rx_channel = NULL; + return ret; + } + + dmae->tx_channel = dma_request_chan(mmc_dev(host->mmc), "tx"); + if (IS_ERR(dmae->tx_channel)) { + if (PTR_ERR(dmae->tx_channel) == -EPROBE_DEFER) + dev_warn(mmc_dev(host->mmc), + "Deferred probe for TX channel ignored\n"); + dmae->tx_channel = NULL; + } /* * If only an RX channel is specified, the driver will @@ -888,6 +907,18 @@ static int _mmci_dmae_prep_data(struct mmci_host *host, struct mmc_data *data, if (data->blksz * data->blocks <= variant->fifosize) return -EINVAL; + /* + * This is necessary to get SDIO working on the Ux500. We do not yet + * know if this is a bug in: + * - The Ux500 DMA controller (DMA40) + * - The MMCI DMA interface on the Ux500 + * some power of two blocks (such as 64 bytes) are sent regularly + * during SDIO traffic and those work fine so for these we enable DMA + * transfers. + */ + if (host->variant->dma_power_of_2 && !is_power_of_2(data->blksz)) + return -EINVAL; + device = chan->device; nr_sg = dma_map_sg(device->dev, data->sg, data->sg_len, mmc_get_dma_dir(data)); @@ -938,9 +969,14 @@ int mmci_dmae_prep_data(struct mmci_host *host, int mmci_dmae_start(struct mmci_host *host, unsigned int *datactrl) { struct mmci_dmae_priv *dmae = host->dma_priv; + int ret; host->dma_in_progress = true; - dmaengine_submit(dmae->desc_current); + ret = dma_submit_error(dmaengine_submit(dmae->desc_current)); + if (ret < 0) { + host->dma_in_progress = false; + return ret; + } dma_async_issue_pending(dmae->cur); *datactrl |= MCI_DPSM_DMAENABLE; @@ -1321,6 +1357,7 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, } else if (host->variant->busy_timeout && busy_resp && status & MCI_DATATIMEOUT) { cmd->error = -ETIMEDOUT; + host->irq_action = IRQ_WAKE_THREAD; } else { cmd->resp[0] = readl(base + MMCIRESPONSE0); cmd->resp[1] = readl(base + MMCIRESPONSE1); @@ -1339,7 +1376,10 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, return; } } - mmci_request_end(host, host->mrq); + + if (host->irq_action != IRQ_WAKE_THREAD) + mmci_request_end(host, host->mrq); + } else if (sbc) { mmci_start_command(host, host->mrq->cmd, 0); } else if (!host->variant->datactrl_first && @@ -1532,9 +1572,9 @@ static irqreturn_t mmci_irq(int irq, void *dev_id) { struct mmci_host *host = dev_id; u32 status; - int ret = 0; spin_lock(&host->lock); + host->irq_action = IRQ_HANDLED; do { status = readl(host->base + MMCISTATUS); @@ -1574,12 +1614,41 @@ static irqreturn_t mmci_irq(int irq, void *dev_id) if (host->variant->busy_detect_flag) status &= ~host->variant->busy_detect_flag; - ret = 1; } while (status); spin_unlock(&host->lock); - return IRQ_RETVAL(ret); + return host->irq_action; +} + +/* + * mmci_irq_thread() - A threaded IRQ handler that manages a reset of the HW. + * + * A reset is needed for some variants, where a datatimeout for a R1B request + * causes the DPSM to stay busy (non-functional). + */ +static irqreturn_t mmci_irq_thread(int irq, void *dev_id) +{ + struct mmci_host *host = dev_id; + unsigned long flags; + + if (host->rst) { + reset_control_assert(host->rst); + udelay(2); + reset_control_deassert(host->rst); + } + + spin_lock_irqsave(&host->lock, flags); + writel(host->clk_reg, host->base + MMCICLOCK); + writel(host->pwr_reg, host->base + MMCIPOWER); + writel(MCI_IRQENABLE | host->variant->start_err, + host->base + MMCIMASK0); + + host->irq_action = IRQ_HANDLED; + mmci_request_end(host, host->mrq); + spin_unlock_irqrestore(&host->lock, flags); + + return host->irq_action; } static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq) @@ -1704,7 +1773,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) pinctrl_select_state(host->pinctrl, host->pins_opendrain); else - pinctrl_select_state(host->pinctrl, host->pins_default); + pinctrl_select_default_state(mmc_dev(mmc)); } /* @@ -1877,14 +1946,6 @@ static int mmci_probe(struct amba_device *dev, goto host_free; } - host->pins_default = pinctrl_lookup_state(host->pinctrl, - PINCTRL_STATE_DEFAULT); - if (IS_ERR(host->pins_default)) { - dev_err(mmc_dev(mmc), "Can't select default pins\n"); - ret = PTR_ERR(host->pins_default); - goto host_free; - } - host->pins_opendrain = pinctrl_lookup_state(host->pinctrl, MMCI_PINCTRL_STATE_OPENDRAIN); if (IS_ERR(host->pins_opendrain)) { @@ -2062,17 +2123,18 @@ static int mmci_probe(struct amba_device *dev, * silently of these do not exist */ if (!np) { - ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL); + ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0); if (ret == -EPROBE_DEFER) goto clk_disable; - ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0, NULL); + ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0); if (ret == -EPROBE_DEFER) goto clk_disable; } - ret = devm_request_irq(&dev->dev, dev->irq[0], mmci_irq, IRQF_SHARED, - DRIVER_NAME " (cmd)", host); + ret = devm_request_threaded_irq(&dev->dev, dev->irq[0], mmci_irq, + mmci_irq_thread, IRQF_SHARED, + DRIVER_NAME " (cmd)", host); if (ret) goto clk_disable; @@ -2203,7 +2265,7 @@ static int mmci_runtime_resume(struct device *dev) struct mmci_host *host = mmc_priv(mmc); clk_prepare_enable(host->clk); mmci_restore(host); - pinctrl_pm_select_default_state(dev); + pinctrl_select_default_state(dev); } return 0; diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 158e1231aa23..ea6a0b5779d4 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -279,7 +279,11 @@ struct mmci_host; * @stm32_clkdiv: true if using a STM32-specific clock divider algorithm * @datactrl_mask_ddrmode: ddr mode mask in datactrl register. * @datactrl_mask_sdio: SDIO enable mask in datactrl register - * @datactrl_blksz: block size in power of two + * @datactrl_blocksz: block size in power of two + * @datactrl_any_blocksz: true if block any block sizes are accepted by + * hardware, such as with some SDIO traffic that send + * odd packets. + * @dma_power_of_2: DMA only works with blocks that are a power of 2. * @datactrl_first: true if data must be setup before send command * @datacnt_useless: true if you could not use datacnt register to read * remaining data @@ -326,6 +330,8 @@ struct variant_data { unsigned int datactrl_mask_ddrmode; unsigned int datactrl_mask_sdio; unsigned int datactrl_blocksz; + u8 datactrl_any_blocksz:1; + u8 dma_power_of_2:1; u8 datactrl_first:1; u8 datacnt_useless:1; u8 st_sdio:1; @@ -404,7 +410,6 @@ struct mmci_host { struct mmci_host_ops *ops; struct variant_data *variant; struct pinctrl *pinctrl; - struct pinctrl_state *pins_default; struct pinctrl_state *pins_opendrain; u8 hw_designer; @@ -412,6 +417,7 @@ struct mmci_host { struct timer_list timer; unsigned int oldstat; + u32 irq_action; /* pio stuff */ struct sg_mapping_iter sg_miter; diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index 010fe29a4888..7726dcf48f2c 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -2194,8 +2194,7 @@ static int msdc_drv_probe(struct platform_device *pdev) if (ret) goto host_free; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - host->base = devm_ioremap_resource(&pdev->dev, res); + host->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(host->base)) { ret = PTR_ERR(host->base); goto host_free; diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c index 74a0a7fbbf7f..203b61712601 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -696,16 +696,14 @@ static int mvsd_probe(struct platform_device *pdev) struct mmc_host *mmc = NULL; struct mvsd_host *host = NULL; const struct mbus_dram_target_info *dram; - struct resource *r; int ret, irq; if (!np) { dev_err(&pdev->dev, "no DT node\n"); return -ENODEV; } - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); - if (!r || irq < 0) + if (irq < 0) return -ENXIO; mmc = mmc_alloc_host(sizeof(struct mvsd_host), &pdev->dev); @@ -758,7 +756,7 @@ static int mvsd_probe(struct platform_device *pdev) spin_lock_init(&host->lock); - host->base = devm_ioremap_resource(&pdev->dev, r); + host->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(host->base)) { ret = PTR_ERR(host->base); goto out; diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index 011b59a3602e..b3d654c688e5 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -1121,7 +1121,16 @@ static int mxcmci_probe(struct platform_device *pdev) mxcmci_writel(host, host->default_irq_mask, MMC_REG_INT_CNTR); if (!host->pdata) { - host->dma = dma_request_slave_channel(&pdev->dev, "rx-tx"); + host->dma = dma_request_chan(&pdev->dev, "rx-tx"); + if (IS_ERR(host->dma)) { + if (PTR_ERR(host->dma) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto out_clk_put; + } + + /* Ignore errors to fall back to PIO mode */ + host->dma = NULL; + } } else { res = platform_get_resource(pdev, IORESOURCE_DMA, 0); if (res) { diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index 4031217d21c3..d82674aed447 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -623,11 +623,11 @@ static int mxs_mmc_probe(struct platform_device *pdev) goto out_clk_disable; } - ssp->dmach = dma_request_slave_channel(&pdev->dev, "rx-tx"); - if (!ssp->dmach) { + ssp->dmach = dma_request_chan(&pdev->dev, "rx-tx"); + if (IS_ERR(ssp->dmach)) { dev_err(mmc_dev(host->mmc), "%s: failed to request dma\n", __func__); - ret = -ENODEV; + ret = PTR_ERR(ssp->dmach); goto out_clk_disable; } diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 767e964ca5a2..a379c45b985c 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1605,12 +1605,6 @@ static int omap_hsmmc_configure_wake_irq(struct omap_hsmmc_host *host) ret = PTR_ERR(p); goto err_free_irq; } - if (IS_ERR(pinctrl_lookup_state(p, PINCTRL_STATE_DEFAULT))) { - dev_info(host->dev, "missing default pinctrl state\n"); - devm_pinctrl_put(p); - ret = -EINVAL; - goto err_free_irq; - } if (IS_ERR(pinctrl_lookup_state(p, PINCTRL_STATE_IDLE))) { dev_info(host->dev, "missing idle pinctrl state\n"); @@ -2153,14 +2147,14 @@ static int omap_hsmmc_runtime_resume(struct device *dev) if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) && (host->flags & HSMMC_SDIO_IRQ_ENABLED)) { - pinctrl_pm_select_default_state(host->dev); + pinctrl_select_default_state(host->dev); /* irq lost, if pinmux incorrect */ OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); OMAP_HSMMC_WRITE(host->base, ISE, CIRQ_EN); OMAP_HSMMC_WRITE(host->base, IE, CIRQ_EN); } else { - pinctrl_pm_select_default_state(host->dev); + pinctrl_select_default_state(host->dev); } spin_unlock_irqrestore(&host->irq_lock, flags); return 0; diff --git a/drivers/mmc/host/owl-mmc.c b/drivers/mmc/host/owl-mmc.c index 771e3d00f1bb..01ffe51f413d 100644 --- a/drivers/mmc/host/owl-mmc.c +++ b/drivers/mmc/host/owl-mmc.c @@ -616,10 +616,10 @@ static int owl_mmc_probe(struct platform_device *pdev) pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - owl_host->dma = dma_request_slave_channel(&pdev->dev, "mmc"); - if (!owl_host->dma) { + owl_host->dma = dma_request_chan(&pdev->dev, "mmc"); + if (IS_ERR(owl_host->dma)) { dev_err(owl_host->dev, "Failed to get external DMA channel.\n"); - ret = -ENXIO; + ret = PTR_ERR(owl_host->dma); goto err_free_host; } diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 024acc1b0a2e..3a9333475a2b 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -710,17 +710,19 @@ static int pxamci_probe(struct platform_device *pdev) platform_set_drvdata(pdev, mmc); - host->dma_chan_rx = dma_request_slave_channel(dev, "rx"); - if (host->dma_chan_rx == NULL) { + host->dma_chan_rx = dma_request_chan(dev, "rx"); + if (IS_ERR(host->dma_chan_rx)) { dev_err(dev, "unable to request rx dma channel\n"); - ret = -ENODEV; + ret = PTR_ERR(host->dma_chan_rx); + host->dma_chan_rx = NULL; goto out; } - host->dma_chan_tx = dma_request_slave_channel(dev, "tx"); - if (host->dma_chan_tx == NULL) { + host->dma_chan_tx = dma_request_chan(dev, "tx"); + if (IS_ERR(host->dma_chan_tx)) { dev_err(dev, "unable to request tx dma channel\n"); - ret = -ENODEV; + ret = PTR_ERR(host->dma_chan_tx); + host->dma_chan_tx = NULL; goto out; } @@ -734,22 +736,22 @@ static int pxamci_probe(struct platform_device *pdev) } /* FIXME: should we pass detection delay to debounce? */ - ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL); + ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0); if (ret && ret != -ENOENT) { dev_err(dev, "Failed requesting gpio_cd\n"); goto out; } - ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0, NULL); + if (!host->pdata->gpio_card_ro_invert) + mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; + + ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0); if (ret && ret != -ENOENT) { dev_err(dev, "Failed requesting gpio_ro\n"); goto out; } - if (!ret) { + if (!ret) host->use_ro_gpio = true; - mmc->caps2 |= host->pdata->gpio_card_ro_invert ? - 0 : MMC_CAP2_RO_ACTIVE_HIGH; - } if (host->pdata->init) host->pdata->init(dev, pxamci_detect_irq, mmc); diff --git a/drivers/mmc/host/renesas_sdhi.h b/drivers/mmc/host/renesas_sdhi.h index c0504aa90857..f524251d5113 100644 --- a/drivers/mmc/host/renesas_sdhi.h +++ b/drivers/mmc/host/renesas_sdhi.h @@ -14,8 +14,8 @@ struct renesas_sdhi_scc { unsigned long clk_rate; /* clock rate for SDR104 */ - u32 tap; /* sampling clock position for SDR104 */ - u32 tap_hs400; /* sampling clock position for HS400 */ + u32 tap; /* sampling clock position for SDR104/HS400 (8 TAP) */ + u32 tap_hs400_4tap; /* sampling clock position for HS400 (4 TAP) */ }; struct renesas_sdhi_of_data { @@ -33,6 +33,11 @@ struct renesas_sdhi_of_data { unsigned short max_segs; }; +struct renesas_sdhi_quirks { + bool hs400_disabled; + bool hs400_4taps; +}; + struct tmio_mmc_dma { enum dma_slave_buswidth dma_buswidth; bool (*filter)(struct dma_chan *chan, void *arg); @@ -46,6 +51,7 @@ struct renesas_sdhi { struct clk *clk_cd; struct tmio_mmc_data mmc_data; struct tmio_mmc_dma dma_priv; + const struct renesas_sdhi_quirks *quirks; struct pinctrl *pinctrl; struct pinctrl_state *pins_default, *pins_uhs; void __iomem *scc_ctl; diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c index 234551a68739..35cb24cd45b4 100644 --- a/drivers/mmc/host/renesas_sdhi_core.c +++ b/drivers/mmc/host/renesas_sdhi_core.c @@ -46,11 +46,6 @@ #define SDHI_VER_GEN3_SD 0xcc10 #define SDHI_VER_GEN3_SDMMC 0xcd10 -struct renesas_sdhi_quirks { - bool hs400_disabled; - bool hs400_4taps; -}; - static void renesas_sdhi_sdbuf_width(struct tmio_mmc_host *host, int width) { u32 val; @@ -355,7 +350,7 @@ static void renesas_sdhi_hs400_complete(struct tmio_mmc_host *host) 0x4 << SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_SHIFT); - if (host->pdata->flags & TMIO_MMC_HAVE_4TAP_HS400) + if (priv->quirks && priv->quirks->hs400_4taps) sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, host->tap_set / 2); @@ -493,7 +488,7 @@ static int renesas_sdhi_select_tuning(struct tmio_mmc_host *host) static bool renesas_sdhi_check_scc_error(struct tmio_mmc_host *host) { struct renesas_sdhi *priv = host_to_priv(host); - bool use_4tap = host->pdata->flags & TMIO_MMC_HAVE_4TAP_HS400; + bool use_4tap = priv->quirks && priv->quirks->hs400_4taps; /* * Skip checking SCC errors when running on 4 taps in HS400 mode as @@ -627,10 +622,10 @@ static const struct renesas_sdhi_quirks sdhi_quirks_nohs400 = { }; static const struct soc_device_attribute sdhi_quirks_match[] = { + { .soc_id = "r8a774a1", .revision = "ES1.[012]", .data = &sdhi_quirks_4tap_nohs400 }, { .soc_id = "r8a7795", .revision = "ES1.*", .data = &sdhi_quirks_4tap_nohs400 }, { .soc_id = "r8a7795", .revision = "ES2.0", .data = &sdhi_quirks_4tap }, { .soc_id = "r8a7796", .revision = "ES1.[012]", .data = &sdhi_quirks_4tap_nohs400 }, - { .soc_id = "r8a774a1", .revision = "ES1.[012]", .data = &sdhi_quirks_4tap_nohs400 }, { .soc_id = "r8a77980", .data = &sdhi_quirks_nohs400 }, { /* Sentinel. */ }, }; @@ -665,6 +660,7 @@ int renesas_sdhi_probe(struct platform_device *pdev, if (!priv) return -ENOMEM; + priv->quirks = quirks; mmc_data = &priv->mmc_data; dma_priv = &priv->dma_priv; @@ -724,9 +720,6 @@ int renesas_sdhi_probe(struct platform_device *pdev, if (quirks && quirks->hs400_disabled) host->mmc->caps2 &= ~(MMC_CAP2_HS400 | MMC_CAP2_HS400_ES); - if (quirks && quirks->hs400_4taps) - mmc_data->flags |= TMIO_MMC_HAVE_4TAP_HS400; - /* For some SoC, we disable internal WP. GPIO may override this */ if (mmc_can_gpio_ro(host->mmc)) mmc_data->capabilities2 &= ~MMC_CAP2_NO_WRITE_PROTECT; @@ -800,20 +793,23 @@ int renesas_sdhi_probe(struct platform_device *pdev, host->mmc->caps2 & (MMC_CAP2_HS200_1_8V_SDR | MMC_CAP2_HS400_1_8V))) { const struct renesas_sdhi_scc *taps = of_data->taps; + bool use_4tap = priv->quirks && priv->quirks->hs400_4taps; bool hit = false; for (i = 0; i < of_data->taps_num; i++) { if (taps[i].clk_rate == 0 || taps[i].clk_rate == host->mmc->f_max) { priv->scc_tappos = taps->tap; - priv->scc_tappos_hs400 = taps->tap_hs400; + priv->scc_tappos_hs400 = use_4tap ? + taps->tap_hs400_4tap : + taps->tap; hit = true; break; } } if (!hit) - dev_warn(&host->pdev->dev, "Unknown clock rate for SDR104\n"); + dev_warn(&host->pdev->dev, "Unknown clock rate for tuning\n"); host->init_tuning = renesas_sdhi_init_tuning; host->prepare_tuning = renesas_sdhi_prepare_tuning; diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c index 18839a10594c..47ac53e91241 100644 --- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c +++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c @@ -82,7 +82,7 @@ static struct renesas_sdhi_scc rcar_gen3_scc_taps[] = { { .clk_rate = 0, .tap = 0x00000300, - .tap_hs400 = 0x00000704, + .tap_hs400_4tap = 0x00000100, }, }; @@ -298,38 +298,23 @@ static const struct tmio_mmc_dma_ops renesas_sdhi_internal_dmac_dma_ops = { * Whitelist of specific R-Car Gen3 SoC ES versions to use this DMAC * implementation as others may use a different implementation. */ -static const struct soc_device_attribute soc_whitelist[] = { - /* specific ones */ +static const struct soc_device_attribute soc_dma_quirks[] = { { .soc_id = "r7s9210", .data = (void *)BIT(SDHI_INTERNAL_DMAC_ADDR_MODE_FIXED_ONLY) }, { .soc_id = "r8a7795", .revision = "ES1.*", .data = (void *)BIT(SDHI_INTERNAL_DMAC_ONE_RX_ONLY) }, { .soc_id = "r8a7796", .revision = "ES1.0", .data = (void *)BIT(SDHI_INTERNAL_DMAC_ONE_RX_ONLY) }, - /* generic ones */ - { .soc_id = "r8a774a1" }, - { .soc_id = "r8a774b1" }, - { .soc_id = "r8a774c0" }, - { .soc_id = "r8a77470" }, - { .soc_id = "r8a7795" }, - { .soc_id = "r8a7796" }, - { .soc_id = "r8a77965" }, - { .soc_id = "r8a77970" }, - { .soc_id = "r8a77980" }, - { .soc_id = "r8a77990" }, - { .soc_id = "r8a77995" }, { /* sentinel */ } }; static int renesas_sdhi_internal_dmac_probe(struct platform_device *pdev) { - const struct soc_device_attribute *soc = soc_device_match(soc_whitelist); + const struct soc_device_attribute *soc = soc_device_match(soc_dma_quirks); struct device *dev = &pdev->dev; - if (!soc) - return -ENODEV; - - global_flags |= (unsigned long)soc->data; + if (soc) + global_flags |= (unsigned long)soc->data; dev->dma_parms = devm_kzalloc(dev, sizeof(*dev->dma_parms), GFP_KERNEL); if (!dev->dma_parms) diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index bce9c33bc4b5..1e616ae56b13 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -1505,14 +1505,14 @@ static int s3cmci_probe_pdata(struct s3cmci_host *host) mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; /* If we get -ENOENT we have no card detect GPIO line */ - ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL); + ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0); if (ret != -ENOENT) { dev_err(&pdev->dev, "error requesting GPIO for CD %d\n", ret); return ret; } - ret = mmc_gpiod_request_ro(host->mmc, "wp", 0, 0, NULL); + ret = mmc_gpiod_request_ro(host->mmc, "wp", 0, 0); if (ret != -ENOENT) { dev_err(&pdev->dev, "error requesting GPIO for WP %d\n", ret); diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index 105e73d4a3b9..dd908577a9dc 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -752,7 +752,7 @@ static int sdhci_acpi_probe(struct platform_device *pdev) if (sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD)) { bool v = sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL); - err = mmc_gpiod_request_cd(host->mmc, NULL, 0, v, 0, NULL); + err = mmc_gpiod_request_cd(host->mmc, NULL, 0, v, 0); if (err) { if (err == -EPROBE_DEFER) goto err_free; diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c index 73bb440aaf93..ad01f6451a95 100644 --- a/drivers/mmc/host/sdhci-brcmstb.c +++ b/drivers/mmc/host/sdhci-brcmstb.c @@ -9,29 +9,236 @@ #include <linux/mmc/host.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/bitops.h> +#include <linux/delay.h> #include "sdhci-pltfm.h" +#include "cqhci.h" -static const struct sdhci_ops sdhci_brcmstb_ops = { +#define SDHCI_VENDOR 0x78 +#define SDHCI_VENDOR_ENHANCED_STRB 0x1 + +#define BRCMSTB_PRIV_FLAGS_NO_64BIT BIT(0) +#define BRCMSTB_PRIV_FLAGS_BROKEN_TIMEOUT BIT(1) + +#define SDHCI_ARASAN_CQE_BASE_ADDR 0x200 + +struct sdhci_brcmstb_priv { + void __iomem *cfg_regs; + bool has_cqe; +}; + +struct brcmstb_match_priv { + void (*hs400es)(struct mmc_host *mmc, struct mmc_ios *ios); + struct sdhci_ops *ops; + unsigned int flags; +}; + +static void sdhci_brcmstb_hs400es(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct sdhci_host *host = mmc_priv(mmc); + + u32 reg; + + dev_dbg(mmc_dev(mmc), "%s(): Setting HS400-Enhanced-Strobe mode\n", + __func__); + reg = readl(host->ioaddr + SDHCI_VENDOR); + if (ios->enhanced_strobe) + reg |= SDHCI_VENDOR_ENHANCED_STRB; + else + reg &= ~SDHCI_VENDOR_ENHANCED_STRB; + writel(reg, host->ioaddr + SDHCI_VENDOR); +} + +static void sdhci_brcmstb_set_clock(struct sdhci_host *host, unsigned int clock) +{ + u16 clk; + + host->mmc->actual_clock = 0; + + clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock); + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + if (clock == 0) + return; + + sdhci_enable_clk(host, clk); +} + +static void sdhci_brcmstb_set_uhs_signaling(struct sdhci_host *host, + unsigned int timing) +{ + u16 ctrl_2; + + dev_dbg(mmc_dev(host->mmc), "%s: Setting UHS signaling for %d timing\n", + __func__, timing); + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + /* Select Bus Speed Mode for host */ + ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; + if ((timing == MMC_TIMING_MMC_HS200) || + (timing == MMC_TIMING_UHS_SDR104)) + ctrl_2 |= SDHCI_CTRL_UHS_SDR104; + else if (timing == MMC_TIMING_UHS_SDR12) + ctrl_2 |= SDHCI_CTRL_UHS_SDR12; + else if (timing == MMC_TIMING_SD_HS || + timing == MMC_TIMING_MMC_HS || + timing == MMC_TIMING_UHS_SDR25) + ctrl_2 |= SDHCI_CTRL_UHS_SDR25; + else if (timing == MMC_TIMING_UHS_SDR50) + ctrl_2 |= SDHCI_CTRL_UHS_SDR50; + else if ((timing == MMC_TIMING_UHS_DDR50) || + (timing == MMC_TIMING_MMC_DDR52)) + ctrl_2 |= SDHCI_CTRL_UHS_DDR50; + else if (timing == MMC_TIMING_MMC_HS400) + ctrl_2 |= SDHCI_CTRL_HS400; /* Non-standard */ + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); +} + +static void sdhci_brcmstb_dumpregs(struct mmc_host *mmc) +{ + sdhci_dumpregs(mmc_priv(mmc)); +} + +static void sdhci_brcmstb_cqe_enable(struct mmc_host *mmc) +{ + struct sdhci_host *host = mmc_priv(mmc); + u32 reg; + + reg = sdhci_readl(host, SDHCI_PRESENT_STATE); + while (reg & SDHCI_DATA_AVAILABLE) { + sdhci_readl(host, SDHCI_BUFFER); + reg = sdhci_readl(host, SDHCI_PRESENT_STATE); + } + + sdhci_cqe_enable(mmc); +} + +static const struct cqhci_host_ops sdhci_brcmstb_cqhci_ops = { + .enable = sdhci_brcmstb_cqe_enable, + .disable = sdhci_cqe_disable, + .dumpregs = sdhci_brcmstb_dumpregs, +}; + +static struct sdhci_ops sdhci_brcmstb_ops = { .set_clock = sdhci_set_clock, .set_bus_width = sdhci_set_bus_width, .reset = sdhci_reset, .set_uhs_signaling = sdhci_set_uhs_signaling, }; -static const struct sdhci_pltfm_data sdhci_brcmstb_pdata = { +static struct sdhci_ops sdhci_brcmstb_ops_7216 = { + .set_clock = sdhci_brcmstb_set_clock, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_brcmstb_set_uhs_signaling, +}; + +static struct brcmstb_match_priv match_priv_7425 = { + .flags = BRCMSTB_PRIV_FLAGS_NO_64BIT | + BRCMSTB_PRIV_FLAGS_BROKEN_TIMEOUT, .ops = &sdhci_brcmstb_ops, }; +static struct brcmstb_match_priv match_priv_7445 = { + .flags = BRCMSTB_PRIV_FLAGS_BROKEN_TIMEOUT, + .ops = &sdhci_brcmstb_ops, +}; + +static const struct brcmstb_match_priv match_priv_7216 = { + .hs400es = sdhci_brcmstb_hs400es, + .ops = &sdhci_brcmstb_ops_7216, +}; + +static const struct of_device_id sdhci_brcm_of_match[] = { + { .compatible = "brcm,bcm7425-sdhci", .data = &match_priv_7425 }, + { .compatible = "brcm,bcm7445-sdhci", .data = &match_priv_7445 }, + { .compatible = "brcm,bcm7216-sdhci", .data = &match_priv_7216 }, + {}, +}; + +static u32 sdhci_brcmstb_cqhci_irq(struct sdhci_host *host, u32 intmask) +{ + int cmd_error = 0; + int data_error = 0; + + if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error)) + return intmask; + + cqhci_irq(host->mmc, intmask, cmd_error, data_error); + + return 0; +} + +static int sdhci_brcmstb_add_host(struct sdhci_host *host, + struct sdhci_brcmstb_priv *priv) +{ + struct cqhci_host *cq_host; + bool dma64; + int ret; + + if (!priv->has_cqe) + return sdhci_add_host(host); + + dev_dbg(mmc_dev(host->mmc), "CQE is enabled\n"); + host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD; + ret = sdhci_setup_host(host); + if (ret) + return ret; + + cq_host = devm_kzalloc(mmc_dev(host->mmc), + sizeof(*cq_host), GFP_KERNEL); + if (!cq_host) { + ret = -ENOMEM; + goto cleanup; + } + + cq_host->mmio = host->ioaddr + SDHCI_ARASAN_CQE_BASE_ADDR; + cq_host->ops = &sdhci_brcmstb_cqhci_ops; + + dma64 = host->flags & SDHCI_USE_64_BIT_DMA; + if (dma64) { + dev_dbg(mmc_dev(host->mmc), "Using 64 bit DMA\n"); + cq_host->caps |= CQHCI_TASK_DESC_SZ_128; + cq_host->quirks |= CQHCI_QUIRK_SHORT_TXFR_DESC_SZ; + } + + ret = cqhci_init(cq_host, host->mmc, dma64); + if (ret) + goto cleanup; + + ret = __sdhci_add_host(host); + if (ret) + goto cleanup; + + return 0; + +cleanup: + sdhci_cleanup_host(host); + return ret; +} + static int sdhci_brcmstb_probe(struct platform_device *pdev) { - struct sdhci_host *host; + const struct brcmstb_match_priv *match_priv; + struct sdhci_pltfm_data brcmstb_pdata; struct sdhci_pltfm_host *pltfm_host; + const struct of_device_id *match; + struct sdhci_brcmstb_priv *priv; + struct sdhci_host *host; + struct resource *iomem; + bool has_cqe = false; struct clk *clk; int res; + match = of_match_node(sdhci_brcm_of_match, pdev->dev.of_node); + match_priv = match->data; + + dev_dbg(&pdev->dev, "Probe found match for %s\n", match->compatible); + clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) { + if (PTR_ERR(clk) == -EPROBE_DEFER) + return -EPROBE_DEFER; dev_err(&pdev->dev, "Clock not found in Device Tree\n"); clk = NULL; } @@ -39,36 +246,64 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev) if (res) return res; - host = sdhci_pltfm_init(pdev, &sdhci_brcmstb_pdata, 0); + memset(&brcmstb_pdata, 0, sizeof(brcmstb_pdata)); + if (device_property_read_bool(&pdev->dev, "supports-cqe")) { + has_cqe = true; + match_priv->ops->irq = sdhci_brcmstb_cqhci_irq; + } + brcmstb_pdata.ops = match_priv->ops; + host = sdhci_pltfm_init(pdev, &brcmstb_pdata, + sizeof(struct sdhci_brcmstb_priv)); if (IS_ERR(host)) { res = PTR_ERR(host); goto err_clk; } + pltfm_host = sdhci_priv(host); + priv = sdhci_pltfm_priv(pltfm_host); + priv->has_cqe = has_cqe; + + /* Map in the non-standard CFG registers */ + iomem = platform_get_resource(pdev, IORESOURCE_MEM, 1); + priv->cfg_regs = devm_ioremap_resource(&pdev->dev, iomem); + if (IS_ERR(priv->cfg_regs)) { + res = PTR_ERR(priv->cfg_regs); + goto err; + } + sdhci_get_of_property(pdev); res = mmc_of_parse(host->mmc); if (res) goto err; /* + * If the chip has enhanced strobe and it's enabled, add + * callback + */ + if (match_priv->hs400es && + (host->mmc->caps2 & MMC_CAP2_HS400_ES)) + host->mmc_host_ops.hs400_enhanced_strobe = match_priv->hs400es; + + /* * Supply the existing CAPS, but clear the UHS modes. This * will allow these modes to be specified by device tree * properties through mmc_of_parse(). */ host->caps = sdhci_readl(host, SDHCI_CAPABILITIES); - if (of_device_is_compatible(pdev->dev.of_node, "brcm,bcm7425-sdhci")) + if (match_priv->flags & BRCMSTB_PRIV_FLAGS_NO_64BIT) host->caps &= ~SDHCI_CAN_64BIT; host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1); host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_SDR104 | - SDHCI_SUPPORT_DDR50); - host->quirks |= SDHCI_QUIRK_MISSING_CAPS | - SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; + SDHCI_SUPPORT_DDR50); + host->quirks |= SDHCI_QUIRK_MISSING_CAPS; + + if (match_priv->flags & BRCMSTB_PRIV_FLAGS_BROKEN_TIMEOUT) + host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; - res = sdhci_add_host(host); + res = sdhci_brcmstb_add_host(host, priv); if (res) goto err; - pltfm_host = sdhci_priv(host); pltfm_host->clk = clk; return res; @@ -79,11 +314,15 @@ err_clk: return res; } -static const struct of_device_id sdhci_brcm_of_match[] = { - { .compatible = "brcm,bcm7425-sdhci" }, - { .compatible = "brcm,bcm7445-sdhci" }, - {}, -}; +static void sdhci_brcmstb_shutdown(struct platform_device *pdev) +{ + int ret; + + ret = sdhci_pltfm_unregister(pdev); + if (ret) + dev_err(&pdev->dev, "failed to shutdown\n"); +} + MODULE_DEVICE_TABLE(of, sdhci_brcm_of_match); static struct platform_driver sdhci_brcmstb_driver = { @@ -94,6 +333,7 @@ static struct platform_driver sdhci_brcmstb_driver = { }, .probe = sdhci_brcmstb_probe, .remove = sdhci_pltfm_unregister, + .shutdown = sdhci_brcmstb_shutdown, }; module_platform_driver(sdhci_brcmstb_driver); diff --git a/drivers/mmc/host/sdhci-cadence.c b/drivers/mmc/host/sdhci-cadence.c index ae0ec27dd7cc..5827d3751b81 100644 --- a/drivers/mmc/host/sdhci-cadence.c +++ b/drivers/mmc/host/sdhci-cadence.c @@ -158,7 +158,7 @@ static int sdhci_cdns_phy_init(struct sdhci_cdns_priv *priv) return 0; } -static inline void *sdhci_cdns_priv(struct sdhci_host *host) +static void *sdhci_cdns_priv(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 1c988d6a2433..382f25b2fa45 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -224,7 +224,6 @@ static struct esdhc_soc_data usdhc_imx8qxp_data = { struct pltfm_imx_data { u32 scratchpad; struct pinctrl *pinctrl; - struct pinctrl_state *pins_default; struct pinctrl_state *pins_100mhz; struct pinctrl_state *pins_200mhz; const struct esdhc_soc_data *socdata; @@ -951,7 +950,6 @@ static int esdhc_change_pinstate(struct sdhci_host *host, dev_dbg(mmc_dev(host->mmc), "change pinctrl state for uhs %d\n", uhs); if (IS_ERR(imx_data->pinctrl) || - IS_ERR(imx_data->pins_default) || IS_ERR(imx_data->pins_100mhz) || IS_ERR(imx_data->pins_200mhz)) return -EINVAL; @@ -968,7 +966,7 @@ static int esdhc_change_pinstate(struct sdhci_host *host, break; default: /* back to default state for other legacy timing */ - pinctrl = imx_data->pins_default; + return pinctrl_select_default_state(mmc_dev(host->mmc)); } return pinctrl_select_state(imx_data->pinctrl, pinctrl); @@ -1338,7 +1336,7 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, mmc_of_parse_voltage(np, &host->ocr_mask); - if (esdhc_is_usdhc(imx_data) && !IS_ERR(imx_data->pins_default)) { + if (esdhc_is_usdhc(imx_data)) { imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl, ESDHC_PINCTRL_STATE_100MHZ); imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl, @@ -1381,19 +1379,20 @@ static int sdhci_esdhc_imx_probe_nondt(struct platform_device *pdev, host->mmc->parent->platform_data); /* write_protect */ if (boarddata->wp_type == ESDHC_WP_GPIO) { - err = mmc_gpiod_request_ro(host->mmc, "wp", 0, 0, NULL); + host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; + + err = mmc_gpiod_request_ro(host->mmc, "wp", 0, 0); if (err) { dev_err(mmc_dev(host->mmc), "failed to request write-protect gpio!\n"); return err; } - host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; } /* card_detect */ switch (boarddata->cd_type) { case ESDHC_CD_GPIO: - err = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0, NULL); + err = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0); if (err) { dev_err(mmc_dev(host->mmc), "failed to request card-detect gpio!\n"); @@ -1492,11 +1491,6 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) goto disable_ahb_clk; } - imx_data->pins_default = pinctrl_lookup_state(imx_data->pinctrl, - PINCTRL_STATE_DEFAULT); - if (IS_ERR(imx_data->pins_default)) - dev_warn(mmc_dev(host->mmc), "could not get default state\n"); - if (esdhc_is_usdhc(imx_data)) { host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN; host->mmc->caps |= MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR; diff --git a/drivers/mmc/host/sdhci-milbeaut.c b/drivers/mmc/host/sdhci-milbeaut.c index a1aa21b9ae1c..92f30a1db435 100644 --- a/drivers/mmc/host/sdhci-milbeaut.c +++ b/drivers/mmc/host/sdhci-milbeaut.c @@ -242,15 +242,12 @@ static int sdhci_milbeaut_probe(struct platform_device *pdev) { struct sdhci_host *host; struct device *dev = &pdev->dev; - struct resource *res; int irq, ret = 0; struct f_sdhost_priv *priv; irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(dev, "%s: no irq specified\n", __func__); + if (irq < 0) return irq; - } host = sdhci_alloc_host(dev, sizeof(struct f_sdhost_priv)); if (IS_ERR(host)) @@ -280,8 +277,7 @@ static int sdhci_milbeaut_probe(struct platform_device *pdev) host->ops = &sdhci_milbeaut_ops; host->irq = irq; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - host->ioaddr = devm_ioremap_resource(&pdev->dev, res); + host->ioaddr = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(host->ioaddr)) { ret = PTR_ERR(host->ioaddr); goto err; diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 3d0bb5e2e09b..c3a160c18047 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -15,6 +15,7 @@ #include <linux/regulator/consumer.h> #include "sdhci-pltfm.h" +#include "cqhci.h" #define CORE_MCI_VERSION 0x50 #define CORE_VERSION_MAJOR_SHIFT 28 @@ -122,6 +123,10 @@ #define msm_host_writel(msm_host, val, host, offset) \ msm_host->var_ops->msm_writel_relaxed(val, host, offset) +/* CQHCI vendor specific registers */ +#define CQHCI_VENDOR_CFG1 0xA00 +#define CQHCI_VENDOR_DIS_RST_ON_CQ_EN (0x3 << 13) + struct sdhci_msm_offset { u32 core_hc_mode; u32 core_mci_data_cnt; @@ -1567,6 +1572,127 @@ out: __sdhci_msm_set_clock(host, clock); } +/*****************************************************************************\ + * * + * MSM Command Queue Engine (CQE) * + * * +\*****************************************************************************/ + +static u32 sdhci_msm_cqe_irq(struct sdhci_host *host, u32 intmask) +{ + int cmd_error = 0; + int data_error = 0; + + if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error)) + return intmask; + + cqhci_irq(host->mmc, intmask, cmd_error, data_error); + return 0; +} + +void sdhci_msm_cqe_disable(struct mmc_host *mmc, bool recovery) +{ + struct sdhci_host *host = mmc_priv(mmc); + unsigned long flags; + u32 ctrl; + + /* + * When CQE is halted, the legacy SDHCI path operates only + * on 16-byte descriptors in 64bit mode. + */ + if (host->flags & SDHCI_USE_64_BIT_DMA) + host->desc_sz = 16; + + spin_lock_irqsave(&host->lock, flags); + + /* + * During CQE command transfers, command complete bit gets latched. + * So s/w should clear command complete interrupt status when CQE is + * either halted or disabled. Otherwise unexpected SDCHI legacy + * interrupt gets triggered when CQE is halted/disabled. + */ + ctrl = sdhci_readl(host, SDHCI_INT_ENABLE); + ctrl |= SDHCI_INT_RESPONSE; + sdhci_writel(host, ctrl, SDHCI_INT_ENABLE); + sdhci_writel(host, SDHCI_INT_RESPONSE, SDHCI_INT_STATUS); + + spin_unlock_irqrestore(&host->lock, flags); + + sdhci_cqe_disable(mmc, recovery); +} + +static const struct cqhci_host_ops sdhci_msm_cqhci_ops = { + .enable = sdhci_cqe_enable, + .disable = sdhci_msm_cqe_disable, +}; + +static int sdhci_msm_cqe_add_host(struct sdhci_host *host, + struct platform_device *pdev) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); + struct cqhci_host *cq_host; + bool dma64; + u32 cqcfg; + int ret; + + /* + * When CQE is halted, SDHC operates only on 16byte ADMA descriptors. + * So ensure ADMA table is allocated for 16byte descriptors. + */ + if (host->caps & SDHCI_CAN_64BIT) + host->alloc_desc_sz = 16; + + ret = sdhci_setup_host(host); + if (ret) + return ret; + + cq_host = cqhci_pltfm_init(pdev); + if (IS_ERR(cq_host)) { + ret = PTR_ERR(cq_host); + dev_err(&pdev->dev, "cqhci-pltfm init: failed: %d\n", ret); + goto cleanup; + } + + msm_host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD; + cq_host->ops = &sdhci_msm_cqhci_ops; + + dma64 = host->flags & SDHCI_USE_64_BIT_DMA; + + ret = cqhci_init(cq_host, host->mmc, dma64); + if (ret) { + dev_err(&pdev->dev, "%s: CQE init: failed (%d)\n", + mmc_hostname(host->mmc), ret); + goto cleanup; + } + + /* Disable cqe reset due to cqe enable signal */ + cqcfg = cqhci_readl(cq_host, CQHCI_VENDOR_CFG1); + cqcfg |= CQHCI_VENDOR_DIS_RST_ON_CQ_EN; + cqhci_writel(cq_host, cqcfg, CQHCI_VENDOR_CFG1); + + /* + * SDHC expects 12byte ADMA descriptors till CQE is enabled. + * So limit desc_sz to 12 so that the data commands that are sent + * during card initialization (before CQE gets enabled) would + * get executed without any issues. + */ + if (host->flags & SDHCI_USE_64_BIT_DMA) + host->desc_sz = 12; + + ret = __sdhci_add_host(host); + if (ret) + goto cleanup; + + dev_info(&pdev->dev, "%s: CQE init: success\n", + mmc_hostname(host->mmc)); + return ret; + +cleanup: + sdhci_cleanup_host(host); + return ret; +} + /* * Platform specific register write functions. This is so that, if any * register write needs to be followed up by platform specific actions, @@ -1731,6 +1857,7 @@ static const struct sdhci_ops sdhci_msm_ops = { .set_uhs_signaling = sdhci_msm_set_uhs_signaling, .write_w = sdhci_msm_writew, .write_b = sdhci_msm_writeb, + .irq = sdhci_msm_cqe_irq, }; static const struct sdhci_pltfm_data sdhci_msm_pdata = { @@ -1746,7 +1873,6 @@ static int sdhci_msm_probe(struct platform_device *pdev) struct sdhci_host *host; struct sdhci_pltfm_host *pltfm_host; struct sdhci_msm_host *msm_host; - struct resource *core_memres; struct clk *clk; int ret; u16 host_version, core_minor; @@ -1754,6 +1880,7 @@ static int sdhci_msm_probe(struct platform_device *pdev) u8 core_major; const struct sdhci_msm_offset *msm_offset; const struct sdhci_msm_variant_info *var_info; + struct device_node *node = pdev->dev.of_node; host = sdhci_pltfm_init(pdev, &sdhci_msm_pdata, sizeof(*msm_host)); if (IS_ERR(host)) @@ -1847,10 +1974,7 @@ static int sdhci_msm_probe(struct platform_device *pdev) } if (!msm_host->mci_removed) { - core_memres = platform_get_resource(pdev, IORESOURCE_MEM, 1); - msm_host->core_mem = devm_ioremap_resource(&pdev->dev, - core_memres); - + msm_host->core_mem = devm_platform_ioremap_resource(pdev, 1); if (IS_ERR(msm_host->core_mem)) { ret = PTR_ERR(msm_host->core_mem); goto clk_disable; @@ -1952,7 +2076,10 @@ static int sdhci_msm_probe(struct platform_device *pdev) pm_runtime_use_autosuspend(&pdev->dev); host->mmc_host_ops.execute_tuning = sdhci_msm_execute_tuning; - ret = sdhci_add_host(host); + if (of_property_read_bool(node, "supports-cqe")) + ret = sdhci_msm_cqe_add_host(host, pdev); + else + ret = sdhci_add_host(host); if (ret) goto pm_runtime_disable; sdhci_msm_set_regulator_caps(msm_host); diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c index 5959e394b416..ab2bd314a390 100644 --- a/drivers/mmc/host/sdhci-of-at91.c +++ b/drivers/mmc/host/sdhci-of-at91.c @@ -33,7 +33,14 @@ #define SDHCI_AT91_PRESET_COMMON_CONF 0x400 /* drv type B, programmable clock mode */ +struct sdhci_at91_soc_data { + const struct sdhci_pltfm_data *pdata; + bool baseclk_is_generated_internally; + unsigned int divider_for_baseclk; +}; + struct sdhci_at91_priv { + const struct sdhci_at91_soc_data *soc_data; struct clk *hclock; struct clk *gck; struct clk *mainck; @@ -141,12 +148,24 @@ static const struct sdhci_ops sdhci_at91_sama5d2_ops = { .set_power = sdhci_at91_set_power, }; -static const struct sdhci_pltfm_data soc_data_sama5d2 = { +static const struct sdhci_pltfm_data sdhci_sama5d2_pdata = { .ops = &sdhci_at91_sama5d2_ops, }; +static const struct sdhci_at91_soc_data soc_data_sama5d2 = { + .pdata = &sdhci_sama5d2_pdata, + .baseclk_is_generated_internally = false, +}; + +static const struct sdhci_at91_soc_data soc_data_sam9x60 = { + .pdata = &sdhci_sama5d2_pdata, + .baseclk_is_generated_internally = true, + .divider_for_baseclk = 2, +}; + static const struct of_device_id sdhci_at91_dt_match[] = { { .compatible = "atmel,sama5d2-sdhci", .data = &soc_data_sama5d2 }, + { .compatible = "microchip,sam9x60-sdhci", .data = &soc_data_sam9x60 }, {} }; MODULE_DEVICE_TABLE(of, sdhci_at91_dt_match); @@ -156,50 +175,37 @@ static int sdhci_at91_set_clks_presets(struct device *dev) struct sdhci_host *host = dev_get_drvdata(dev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host); - int ret; unsigned int caps0, caps1; unsigned int clk_base, clk_mul; - unsigned int gck_rate, real_gck_rate; + unsigned int gck_rate, clk_base_rate; unsigned int preset_div; - /* - * The mult clock is provided by as a generated clock by the PMC - * controller. In order to set the rate of gck, we have to get the - * base clock rate and the clock mult from capabilities. - */ clk_prepare_enable(priv->hclock); caps0 = readl(host->ioaddr + SDHCI_CAPABILITIES); caps1 = readl(host->ioaddr + SDHCI_CAPABILITIES_1); - clk_base = (caps0 & SDHCI_CLOCK_V3_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; - clk_mul = (caps1 & SDHCI_CLOCK_MUL_MASK) >> SDHCI_CLOCK_MUL_SHIFT; - gck_rate = clk_base * 1000000 * (clk_mul + 1); - ret = clk_set_rate(priv->gck, gck_rate); - if (ret < 0) { - dev_err(dev, "failed to set gck"); - clk_disable_unprepare(priv->hclock); - return ret; - } - /* - * We need to check if we have the requested rate for gck because in - * some cases this rate could be not supported. If it happens, the rate - * is the closest one gck can provide. We have to update the value - * of clk mul. - */ - real_gck_rate = clk_get_rate(priv->gck); - if (real_gck_rate != gck_rate) { - clk_mul = real_gck_rate / (clk_base * 1000000) - 1; - caps1 &= (~SDHCI_CLOCK_MUL_MASK); - caps1 |= ((clk_mul << SDHCI_CLOCK_MUL_SHIFT) & - SDHCI_CLOCK_MUL_MASK); - /* Set capabilities in r/w mode. */ - writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, - host->ioaddr + SDMMC_CACR); - writel(caps1, host->ioaddr + SDHCI_CAPABILITIES_1); - /* Set capabilities in ro mode. */ - writel(0, host->ioaddr + SDMMC_CACR); - dev_info(dev, "update clk mul to %u as gck rate is %u Hz\n", - clk_mul, real_gck_rate); - } + + gck_rate = clk_get_rate(priv->gck); + if (priv->soc_data->baseclk_is_generated_internally) + clk_base_rate = gck_rate / priv->soc_data->divider_for_baseclk; + else + clk_base_rate = clk_get_rate(priv->mainck); + + clk_base = clk_base_rate / 1000000; + clk_mul = gck_rate / clk_base_rate - 1; + + caps0 &= ~SDHCI_CLOCK_V3_BASE_MASK; + caps0 |= (clk_base << SDHCI_CLOCK_BASE_SHIFT) & SDHCI_CLOCK_V3_BASE_MASK; + caps1 &= ~SDHCI_CLOCK_MUL_MASK; + caps1 |= (clk_mul << SDHCI_CLOCK_MUL_SHIFT) & SDHCI_CLOCK_MUL_MASK; + /* Set capabilities in r/w mode. */ + writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, host->ioaddr + SDMMC_CACR); + writel(caps0, host->ioaddr + SDHCI_CAPABILITIES); + writel(caps1, host->ioaddr + SDHCI_CAPABILITIES_1); + /* Set capabilities in ro mode. */ + writel(0, host->ioaddr + SDMMC_CACR); + + dev_info(dev, "update clk mul to %u as gck rate is %u Hz and clk base is %u Hz\n", + clk_mul, gck_rate, clk_base_rate); /* * We have to set preset values because it depends on the clk_mul @@ -207,19 +213,19 @@ static int sdhci_at91_set_clks_presets(struct device *dev) * maximum sd clock value is 120 MHz instead of 208 MHz. For that * reason, we need to use presets to support SDR104. */ - preset_div = DIV_ROUND_UP(real_gck_rate, 24000000) - 1; + preset_div = DIV_ROUND_UP(gck_rate, 24000000) - 1; writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, host->ioaddr + SDHCI_PRESET_FOR_SDR12); - preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1; + preset_div = DIV_ROUND_UP(gck_rate, 50000000) - 1; writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, host->ioaddr + SDHCI_PRESET_FOR_SDR25); - preset_div = DIV_ROUND_UP(real_gck_rate, 100000000) - 1; + preset_div = DIV_ROUND_UP(gck_rate, 100000000) - 1; writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, host->ioaddr + SDHCI_PRESET_FOR_SDR50); - preset_div = DIV_ROUND_UP(real_gck_rate, 120000000) - 1; + preset_div = DIV_ROUND_UP(gck_rate, 120000000) - 1; writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, host->ioaddr + SDHCI_PRESET_FOR_SDR104); - preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1; + preset_div = DIV_ROUND_UP(gck_rate, 50000000) - 1; writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, host->ioaddr + SDHCI_PRESET_FOR_DDR50); @@ -314,7 +320,7 @@ static const struct dev_pm_ops sdhci_at91_dev_pm_ops = { static int sdhci_at91_probe(struct platform_device *pdev) { const struct of_device_id *match; - const struct sdhci_pltfm_data *soc_data; + const struct sdhci_at91_soc_data *soc_data; struct sdhci_host *host; struct sdhci_pltfm_host *pltfm_host; struct sdhci_at91_priv *priv; @@ -325,29 +331,37 @@ static int sdhci_at91_probe(struct platform_device *pdev) return -EINVAL; soc_data = match->data; - host = sdhci_pltfm_init(pdev, soc_data, sizeof(*priv)); + host = sdhci_pltfm_init(pdev, soc_data->pdata, sizeof(*priv)); if (IS_ERR(host)) return PTR_ERR(host); pltfm_host = sdhci_priv(host); priv = sdhci_pltfm_priv(pltfm_host); + priv->soc_data = soc_data; priv->mainck = devm_clk_get(&pdev->dev, "baseclk"); if (IS_ERR(priv->mainck)) { - dev_err(&pdev->dev, "failed to get baseclk\n"); - return PTR_ERR(priv->mainck); + if (soc_data->baseclk_is_generated_internally) { + priv->mainck = NULL; + } else { + dev_err(&pdev->dev, "failed to get baseclk\n"); + ret = PTR_ERR(priv->mainck); + goto sdhci_pltfm_free; + } } priv->hclock = devm_clk_get(&pdev->dev, "hclock"); if (IS_ERR(priv->hclock)) { dev_err(&pdev->dev, "failed to get hclock\n"); - return PTR_ERR(priv->hclock); + ret = PTR_ERR(priv->hclock); + goto sdhci_pltfm_free; } priv->gck = devm_clk_get(&pdev->dev, "multclk"); if (IS_ERR(priv->gck)) { dev_err(&pdev->dev, "failed to get multclk\n"); - return PTR_ERR(priv->gck); + ret = PTR_ERR(priv->gck); + goto sdhci_pltfm_free; } ret = sdhci_at91_set_clks_presets(&pdev->dev); diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index 500f70a6ee42..5d8dd870bd44 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -173,6 +173,9 @@ static u16 esdhc_readw_fixup(struct sdhci_host *host, u16 ret; int shift = (spec_reg & 0x2) * 8; + if (spec_reg == SDHCI_TRANSFER_MODE) + return pltfm_host->xfer_mode_shadow; + if (spec_reg == SDHCI_HOST_VERSION) ret = value & 0xffff; else @@ -562,32 +565,46 @@ static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host) static void esdhc_clock_enable(struct sdhci_host *host, bool enable) { - u32 val; + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); ktime_t timeout; + u32 val, clk_en; + + clk_en = ESDHC_CLOCK_SDCLKEN; + + /* + * IPGEN/HCKEN/PEREN bits exist on eSDHC whose vendor version + * is 2.2 or lower. + */ + if (esdhc->vendor_ver <= VENDOR_V_22) + clk_en |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | + ESDHC_CLOCK_PEREN); val = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); if (enable) - val |= ESDHC_CLOCK_SDCLKEN; + val |= clk_en; else - val &= ~ESDHC_CLOCK_SDCLKEN; + val &= ~clk_en; sdhci_writel(host, val, ESDHC_SYSTEM_CONTROL); - /* Wait max 20 ms */ + /* + * Wait max 20 ms. If vendor version is 2.2 or lower, do not + * wait clock stable bit which does not exist. + */ timeout = ktime_add_ms(ktime_get(), 20); - val = ESDHC_CLOCK_STABLE; - while (1) { + while (esdhc->vendor_ver > VENDOR_V_22) { bool timedout = ktime_after(ktime_get(), timeout); - if (sdhci_readl(host, ESDHC_PRSSTAT) & val) + if (sdhci_readl(host, ESDHC_PRSSTAT) & ESDHC_CLOCK_STABLE) break; if (timedout) { pr_err("%s: Internal clock never stabilised.\n", mmc_hostname(host->mmc)); break; } - udelay(10); + usleep_range(10, 20); } } @@ -621,77 +638,97 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); - int pre_div = 1; - int div = 1; - int division; + unsigned int pre_div = 1, div = 1; + unsigned int clock_fixup = 0; ktime_t timeout; - long fixup = 0; u32 temp; - host->mmc->actual_clock = 0; - if (clock == 0) { + host->mmc->actual_clock = 0; esdhc_clock_enable(host, false); return; } - /* Workaround to start pre_div at 2 for VNN < VENDOR_V_23 */ + /* Start pre_div at 2 for vendor version < 2.3. */ if (esdhc->vendor_ver < VENDOR_V_23) pre_div = 2; + /* Fix clock value. */ if (host->mmc->card && mmc_card_sd(host->mmc->card) && - esdhc->clk_fixup && host->mmc->ios.timing == MMC_TIMING_LEGACY) - fixup = esdhc->clk_fixup->sd_dflt_max_clk; + esdhc->clk_fixup && host->mmc->ios.timing == MMC_TIMING_LEGACY) + clock_fixup = esdhc->clk_fixup->sd_dflt_max_clk; else if (esdhc->clk_fixup) - fixup = esdhc->clk_fixup->max_clk[host->mmc->ios.timing]; - - if (fixup && clock > fixup) - clock = fixup; + clock_fixup = esdhc->clk_fixup->max_clk[host->mmc->ios.timing]; - temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); - temp &= ~(ESDHC_CLOCK_SDCLKEN | ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | - ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK); - sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); + if (clock_fixup == 0 || clock < clock_fixup) + clock_fixup = clock; - while (host->max_clk / pre_div / 16 > clock && pre_div < 256) + /* Calculate pre_div and div. */ + while (host->max_clk / pre_div / 16 > clock_fixup && pre_div < 256) pre_div *= 2; - while (host->max_clk / pre_div / div > clock && div < 16) + while (host->max_clk / pre_div / div > clock_fixup && div < 16) div++; + esdhc->div_ratio = pre_div * div; + + /* Limit clock division for HS400 200MHz clock for quirk. */ if (esdhc->quirk_limited_clk_division && clock == MMC_HS200_MAX_DTR && (host->mmc->ios.timing == MMC_TIMING_MMC_HS400 || host->flags & SDHCI_HS400_TUNING)) { - division = pre_div * div; - if (division <= 4) { + if (esdhc->div_ratio <= 4) { pre_div = 4; div = 1; - } else if (division <= 8) { + } else if (esdhc->div_ratio <= 8) { pre_div = 4; div = 2; - } else if (division <= 12) { + } else if (esdhc->div_ratio <= 12) { pre_div = 4; div = 3; } else { pr_warn("%s: using unsupported clock division.\n", mmc_hostname(host->mmc)); } + esdhc->div_ratio = pre_div * div; } + host->mmc->actual_clock = host->max_clk / esdhc->div_ratio; + dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n", - clock, host->max_clk / pre_div / div); - host->mmc->actual_clock = host->max_clk / pre_div / div; - esdhc->div_ratio = pre_div * div; + clock, host->mmc->actual_clock); + + /* Set clock division into register. */ pre_div >>= 1; div--; + esdhc_clock_enable(host, false); + temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); - temp |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN - | (div << ESDHC_DIVIDER_SHIFT) - | (pre_div << ESDHC_PREDIV_SHIFT)); + temp &= ~ESDHC_CLOCK_MASK; + temp |= ((div << ESDHC_DIVIDER_SHIFT) | + (pre_div << ESDHC_PREDIV_SHIFT)); sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); + /* + * Wait max 20 ms. If vendor version is 2.2 or lower, do not + * wait clock stable bit which does not exist. + */ + timeout = ktime_add_ms(ktime_get(), 20); + while (esdhc->vendor_ver > VENDOR_V_22) { + bool timedout = ktime_after(ktime_get(), timeout); + + if (sdhci_readl(host, ESDHC_PRSSTAT) & ESDHC_CLOCK_STABLE) + break; + if (timedout) { + pr_err("%s: Internal clock never stabilised.\n", + mmc_hostname(host->mmc)); + break; + } + usleep_range(10, 20); + } + + /* Additional setting for HS400. */ if (host->mmc->ios.timing == MMC_TIMING_MMC_HS400 && clock == MMC_HS200_MAX_DTR) { temp = sdhci_readl(host, ESDHC_TBCTL); @@ -711,25 +748,7 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock) esdhc_clock_enable(host, false); esdhc_flush_async_fifo(host); } - - /* Wait max 20 ms */ - timeout = ktime_add_ms(ktime_get(), 20); - while (1) { - bool timedout = ktime_after(ktime_get(), timeout); - - if (sdhci_readl(host, ESDHC_PRSSTAT) & ESDHC_CLOCK_STABLE) - break; - if (timedout) { - pr_err("%s: Internal clock never stabilised.\n", - mmc_hostname(host->mmc)); - return; - } - udelay(10); - } - - temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); - temp |= ESDHC_CLOCK_SDCLKEN; - sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); + esdhc_clock_enable(host, true); } static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width) @@ -758,23 +777,58 @@ static void esdhc_reset(struct sdhci_host *host, u8 mask) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); - u32 val; + u32 val, bus_width = 0; + /* + * Add delay to make sure all the DMA transfers are finished + * for quirk. + */ if (esdhc->quirk_delay_before_data_reset && (mask & SDHCI_RESET_DATA) && (host->flags & SDHCI_REQ_USE_DMA)) mdelay(5); + /* + * Save bus-width for eSDHC whose vendor version is 2.2 + * or lower for data reset. + */ + if ((mask & SDHCI_RESET_DATA) && + (esdhc->vendor_ver <= VENDOR_V_22)) { + val = sdhci_readl(host, ESDHC_PROCTL); + bus_width = val & ESDHC_CTRL_BUSWIDTH_MASK; + } + sdhci_reset(host, mask); - sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); - sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + /* + * Restore bus-width setting and interrupt registers for eSDHC + * whose vendor version is 2.2 or lower for data reset. + */ + if ((mask & SDHCI_RESET_DATA) && + (esdhc->vendor_ver <= VENDOR_V_22)) { + val = sdhci_readl(host, ESDHC_PROCTL); + val &= ~ESDHC_CTRL_BUSWIDTH_MASK; + val |= bus_width; + sdhci_writel(host, val, ESDHC_PROCTL); - if (mask & SDHCI_RESET_ALL) { + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + } + + /* + * Some bits have to be cleaned manually for eSDHC whose spec + * version is higher than 3.0 for all reset. + */ + if ((mask & SDHCI_RESET_ALL) && + (esdhc->spec_ver >= SDHCI_SPEC_300)) { val = sdhci_readl(host, ESDHC_TBCTL); val &= ~ESDHC_TB_EN; sdhci_writel(host, val, ESDHC_TBCTL); + /* + * Initialize eSDHC_DLLCFG1[DLL_PD_PULSE_STRETCH_SEL] to + * 0 for quirk. + */ if (esdhc->quirk_unreliable_pulse_detection) { val = sdhci_readl(host, ESDHC_DLLCFG1); val &= ~ESDHC_DLL_PD_PULSE_STRETCH_SEL; @@ -854,20 +908,20 @@ static int esdhc_signal_voltage_switch(struct mmc_host *mmc, } static struct soc_device_attribute soc_tuning_erratum_type1[] = { - { .family = "QorIQ T1023", .revision = "1.0", }, - { .family = "QorIQ T1040", .revision = "1.0", }, - { .family = "QorIQ T2080", .revision = "1.0", }, - { .family = "QorIQ LS1021A", .revision = "1.0", }, + { .family = "QorIQ T1023", }, + { .family = "QorIQ T1040", }, + { .family = "QorIQ T2080", }, + { .family = "QorIQ LS1021A", }, { }, }; static struct soc_device_attribute soc_tuning_erratum_type2[] = { - { .family = "QorIQ LS1012A", .revision = "1.0", }, - { .family = "QorIQ LS1043A", .revision = "1.*", }, - { .family = "QorIQ LS1046A", .revision = "1.0", }, - { .family = "QorIQ LS1080A", .revision = "1.0", }, - { .family = "QorIQ LS2080A", .revision = "1.0", }, - { .family = "QorIQ LA1575A", .revision = "1.0", }, + { .family = "QorIQ LS1012A", }, + { .family = "QorIQ LS1043A", }, + { .family = "QorIQ LS1046A", }, + { .family = "QorIQ LS1080A", }, + { .family = "QorIQ LS2080A", }, + { .family = "QorIQ LA1575A", }, { }, }; @@ -888,20 +942,11 @@ static void esdhc_tuning_block_enable(struct sdhci_host *host, bool enable) esdhc_clock_enable(host, true); } -static void esdhc_prepare_sw_tuning(struct sdhci_host *host, u8 *window_start, +static void esdhc_tuning_window_ptr(struct sdhci_host *host, u8 *window_start, u8 *window_end) { - struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); - struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); - u8 tbstat_15_8, tbstat_7_0; u32 val; - if (esdhc->quirk_tuning_erratum_type1) { - *window_start = 5 * esdhc->div_ratio; - *window_end = 3 * esdhc->div_ratio; - return; - } - /* Write TBCTL[11:8]=4'h8 */ val = sdhci_readl(host, ESDHC_TBCTL); val &= ~(0xf << 8); @@ -920,20 +965,37 @@ static void esdhc_prepare_sw_tuning(struct sdhci_host *host, u8 *window_start, val = sdhci_readl(host, ESDHC_TBSTAT); val = sdhci_readl(host, ESDHC_TBSTAT); + *window_end = val & 0xff; + *window_start = (val >> 8) & 0xff; +} + +static void esdhc_prepare_sw_tuning(struct sdhci_host *host, u8 *window_start, + u8 *window_end) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); + u8 start_ptr, end_ptr; + + if (esdhc->quirk_tuning_erratum_type1) { + *window_start = 5 * esdhc->div_ratio; + *window_end = 3 * esdhc->div_ratio; + return; + } + + esdhc_tuning_window_ptr(host, &start_ptr, &end_ptr); + /* Reset data lines by setting ESDHCCTL[RSTD] */ sdhci_reset(host, SDHCI_RESET_DATA); /* Write 32'hFFFF_FFFF to IRQSTAT register */ sdhci_writel(host, 0xFFFFFFFF, SDHCI_INT_STATUS); - /* If TBSTAT[15:8]-TBSTAT[7:0] > 4 * div_ratio - * or TBSTAT[7:0]-TBSTAT[15:8] > 4 * div_ratio, + /* If TBSTAT[15:8]-TBSTAT[7:0] > (4 * div_ratio) + 2 + * or TBSTAT[7:0]-TBSTAT[15:8] > (4 * div_ratio) + 2, * then program TBPTR[TB_WNDW_END_PTR] = 4 * div_ratio * and program TBPTR[TB_WNDW_START_PTR] = 8 * div_ratio. */ - tbstat_7_0 = val & 0xff; - tbstat_15_8 = (val >> 8) & 0xff; - if (abs(tbstat_15_8 - tbstat_7_0) > (4 * esdhc->div_ratio)) { + if (abs(start_ptr - end_ptr) > (4 * esdhc->div_ratio + 2)) { *window_start = 8 * esdhc->div_ratio; *window_end = 4 * esdhc->div_ratio; } else { @@ -1006,6 +1068,19 @@ static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) if (ret) break; + /* For type2 affected platforms of the tuning erratum, + * tuning may succeed although eSDHC might not have + * tuned properly. Need to check tuning window. + */ + if (esdhc->quirk_tuning_erratum_type2 && + !host->tuning_err) { + esdhc_tuning_window_ptr(host, &window_start, + &window_end); + if (abs(window_start - window_end) > + (4 * esdhc->div_ratio + 2)) + host->tuning_err = -EAGAIN; + } + /* If HW tuning fails and triggers erratum, * try workaround. */ @@ -1238,7 +1313,8 @@ static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host) * 1/2 peripheral clock. */ if (of_device_is_compatible(np, "fsl,ls1046a-esdhc") || - of_device_is_compatible(np, "fsl,ls1028a-esdhc")) + of_device_is_compatible(np, "fsl,ls1028a-esdhc") || + of_device_is_compatible(np, "fsl,ls1088a-esdhc")) esdhc->peripheral_clock = clk_get_rate(clk) / 2; else esdhc->peripheral_clock = clk_get_rate(clk); diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c index 083e7e053c95..882053151a47 100644 --- a/drivers/mmc/host/sdhci-omap.c +++ b/drivers/mmc/host/sdhci-omap.c @@ -7,6 +7,7 @@ */ #include <linux/delay.h> +#include <linux/mmc/mmc.h> #include <linux/mmc/slot-gpio.h> #include <linux/module.h> #include <linux/of.h> @@ -85,6 +86,7 @@ /* sdhci-omap controller flags */ #define SDHCI_OMAP_REQUIRE_IODELAY BIT(0) +#define SDHCI_OMAP_SPECIAL_RESET BIT(1) struct sdhci_omap_data { u32 offset; @@ -685,7 +687,11 @@ static int sdhci_omap_enable_dma(struct sdhci_host *host) struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host); reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON); - reg |= CON_DMA_MASTER; + reg &= ~CON_DMA_MASTER; + /* Switch to DMA slave mode when using external DMA */ + if (!host->use_external_dma) + reg |= CON_DMA_MASTER; + sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, reg); return 0; @@ -774,15 +780,35 @@ static void sdhci_omap_set_uhs_signaling(struct sdhci_host *host, sdhci_omap_start_clock(omap_host); } +#define MMC_TIMEOUT_US 20000 /* 20000 micro Sec */ static void sdhci_omap_reset(struct sdhci_host *host, u8 mask) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host); + unsigned long limit = MMC_TIMEOUT_US; + unsigned long i = 0; /* Don't reset data lines during tuning operation */ if (omap_host->is_tuning) mask &= ~SDHCI_RESET_DATA; + if (omap_host->flags & SDHCI_OMAP_SPECIAL_RESET) { + sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET); + while ((!(sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask)) && + (i++ < limit)) + udelay(1); + i = 0; + while ((sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) && + (i++ < limit)) + udelay(1); + + if (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) + dev_err(mmc_dev(host->mmc), + "Timeout waiting on controller reset in %s\n", + __func__); + return; + } + sdhci_reset(host, mask); } @@ -823,6 +849,15 @@ static u32 sdhci_omap_irq(struct sdhci_host *host, u32 intmask) return intmask; } +static void sdhci_omap_set_timeout(struct sdhci_host *host, + struct mmc_command *cmd) +{ + if (cmd->opcode == MMC_ERASE) + sdhci_set_data_timeout_irq(host, false); + + __sdhci_set_timeout(host, cmd); +} + static struct sdhci_ops sdhci_omap_ops = { .set_clock = sdhci_omap_set_clock, .set_power = sdhci_omap_set_power, @@ -834,6 +869,7 @@ static struct sdhci_ops sdhci_omap_ops = { .reset = sdhci_omap_reset, .set_uhs_signaling = sdhci_omap_set_uhs_signaling, .irq = sdhci_omap_irq, + .set_timeout = sdhci_omap_set_timeout, }; static int sdhci_omap_set_capabilities(struct sdhci_omap_host *omap_host) @@ -883,6 +919,16 @@ static const struct sdhci_omap_data k2g_data = { .offset = 0x200, }; +static const struct sdhci_omap_data am335_data = { + .offset = 0x200, + .flags = SDHCI_OMAP_SPECIAL_RESET, +}; + +static const struct sdhci_omap_data am437_data = { + .offset = 0x200, + .flags = SDHCI_OMAP_SPECIAL_RESET, +}; + static const struct sdhci_omap_data dra7_data = { .offset = 0x200, .flags = SDHCI_OMAP_REQUIRE_IODELAY, @@ -891,6 +937,8 @@ static const struct sdhci_omap_data dra7_data = { static const struct of_device_id omap_sdhci_match[] = { { .compatible = "ti,dra7-sdhci", .data = &dra7_data }, { .compatible = "ti,k2g-sdhci", .data = &k2g_data }, + { .compatible = "ti,am335-sdhci", .data = &am335_data }, + { .compatible = "ti,am437-sdhci", .data = &am437_data }, {}, }; MODULE_DEVICE_TABLE(of, omap_sdhci_match); @@ -1037,6 +1085,7 @@ static int sdhci_omap_probe(struct platform_device *pdev) const struct of_device_id *match; struct sdhci_omap_data *data; const struct soc_device_attribute *soc; + struct resource *regs; match = of_match_device(omap_sdhci_match, dev); if (!match) @@ -1049,6 +1098,10 @@ static int sdhci_omap_probe(struct platform_device *pdev) } offset = data->offset; + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) + return -ENXIO; + host = sdhci_pltfm_init(pdev, &sdhci_omap_pdata, sizeof(*omap_host)); if (IS_ERR(host)) { @@ -1065,6 +1118,7 @@ static int sdhci_omap_probe(struct platform_device *pdev) omap_host->timing = MMC_TIMING_LEGACY; omap_host->flags = data->flags; host->ioaddr += offset; + host->mapbase = regs->start + offset; mmc = host->mmc; sdhci_get_of_property(pdev); @@ -1134,6 +1188,10 @@ static int sdhci_omap_probe(struct platform_device *pdev) host->mmc_host_ops.execute_tuning = sdhci_omap_execute_tuning; host->mmc_host_ops.enable_sdio_irq = sdhci_omap_enable_sdio_irq; + /* Switch to external DMA only if there is the "dmas" property */ + if (of_find_property(dev->of_node, "dmas", NULL)) + sdhci_switch_external_dma(host, true); + ret = sdhci_setup_host(host); if (ret) goto err_put_sync; diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index 5091e2c1c0e5..525de2454a4d 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -1991,12 +1991,12 @@ static struct sdhci_pci_slot *sdhci_pci_probe_slot( if (slot->cd_idx >= 0) { ret = mmc_gpiod_request_cd(host->mmc, "cd", slot->cd_idx, - slot->cd_override_level, 0, NULL); + slot->cd_override_level, 0); if (ret && ret != -EPROBE_DEFER) ret = mmc_gpiod_request_cd(host->mmc, NULL, slot->cd_idx, slot->cd_override_level, - 0, NULL); + 0); if (ret == -EPROBE_DEFER) goto remove; diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index 51e096f27388..64200c78e90d 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -117,7 +117,6 @@ struct sdhci_s3c { struct s3c_sdhci_platdata *pdata; int cur_clk; int ext_cd_irq; - int ext_cd_gpio; struct clk *clk_io; struct clk *clk_bus[MAX_BUS_CLK]; @@ -481,7 +480,6 @@ static int sdhci_s3c_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct sdhci_host *host; struct sdhci_s3c *sc; - struct resource *res; int ret, irq, ptr, clks; if (!pdev->dev.platform_data && !pdev->dev.of_node) { @@ -512,7 +510,6 @@ static int sdhci_s3c_probe(struct platform_device *pdev) goto err_pdata_io_clk; } else { memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata)); - sc->ext_cd_gpio = -1; /* invalid gpio number */ } drv_data = sdhci_s3c_get_driver_data(pdev); @@ -555,8 +552,7 @@ static int sdhci_s3c_probe(struct platform_device *pdev) goto err_no_busclks; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - host->ioaddr = devm_ioremap_resource(&pdev->dev, res); + host->ioaddr = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(host->ioaddr)) { ret = PTR_ERR(host->ioaddr); goto err_req_regs; diff --git a/drivers/mmc/host/sdhci-sirf.c b/drivers/mmc/host/sdhci-sirf.c index e43143223320..f4b05dd6c20a 100644 --- a/drivers/mmc/host/sdhci-sirf.c +++ b/drivers/mmc/host/sdhci-sirf.c @@ -194,7 +194,7 @@ static int sdhci_sirf_probe(struct platform_device *pdev) * We must request the IRQ after sdhci_add_host(), as the tasklet only * gets setup in sdhci_add_host() and we oops. */ - ret = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0, NULL); + ret = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0); if (ret == -EPROBE_DEFER) goto err_request_cd; if (!ret) diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c index 916b5b09c3d1..b4b63089a4e2 100644 --- a/drivers/mmc/host/sdhci-spear.c +++ b/drivers/mmc/host/sdhci-spear.c @@ -43,7 +43,6 @@ static const struct sdhci_ops sdhci_pltfm_ops = { static int sdhci_probe(struct platform_device *pdev) { struct sdhci_host *host; - struct resource *iomem; struct spear_sdhci *sdhci; struct device *dev; int ret; @@ -56,8 +55,7 @@ static int sdhci_probe(struct platform_device *pdev) goto err; } - iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - host->ioaddr = devm_ioremap_resource(&pdev->dev, iomem); + host->ioaddr = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(host->ioaddr)) { ret = PTR_ERR(host->ioaddr); dev_dbg(&pdev->dev, "unable to map iomem: %d\n", ret); @@ -98,7 +96,7 @@ static int sdhci_probe(struct platform_device *pdev) * It is optional to use GPIOs for sdhci card detection. If we * find a descriptor using slot GPIO, we use it. */ - ret = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0, NULL); + ret = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0); if (ret == -EPROBE_DEFER) goto disable_clk; diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 659a9459ace3..63db84481dff 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -10,6 +10,7 @@ */ #include <linux/delay.h> +#include <linux/dmaengine.h> #include <linux/ktime.h> #include <linux/highmem.h> #include <linux/io.h> @@ -992,7 +993,7 @@ static void sdhci_set_transfer_irqs(struct sdhci_host *host) sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); } -static void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable) +void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable) { if (enable) host->ier |= SDHCI_INT_DATA_TIMEOUT; @@ -1001,42 +1002,36 @@ static void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable) sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); } +EXPORT_SYMBOL_GPL(sdhci_set_data_timeout_irq); -static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) +void __sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) { - u8 count; - - if (host->ops->set_timeout) { - host->ops->set_timeout(host, cmd); - } else { - bool too_big = false; - - count = sdhci_calc_timeout(host, cmd, &too_big); - - if (too_big && - host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT) { - sdhci_calc_sw_timeout(host, cmd); - sdhci_set_data_timeout_irq(host, false); - } else if (!(host->ier & SDHCI_INT_DATA_TIMEOUT)) { - sdhci_set_data_timeout_irq(host, true); - } - - sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL); + bool too_big = false; + u8 count = sdhci_calc_timeout(host, cmd, &too_big); + + if (too_big && + host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT) { + sdhci_calc_sw_timeout(host, cmd); + sdhci_set_data_timeout_irq(host, false); + } else if (!(host->ier & SDHCI_INT_DATA_TIMEOUT)) { + sdhci_set_data_timeout_irq(host, true); } + + sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL); } +EXPORT_SYMBOL_GPL(__sdhci_set_timeout); -static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) +static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) { - struct mmc_data *data = cmd->data; - - host->data_timeout = 0; - - if (sdhci_data_line_cmd(cmd)) - sdhci_set_timeout(host, cmd); - - if (!data) - return; + if (host->ops->set_timeout) + host->ops->set_timeout(host, cmd); + else + __sdhci_set_timeout(host, cmd); +} +static void sdhci_initialize_data(struct sdhci_host *host, + struct mmc_data *data) +{ WARN_ON(host->data); /* Sanity checks */ @@ -1047,6 +1042,34 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) host->data = data; host->data_early = 0; host->data->bytes_xfered = 0; +} + +static inline void sdhci_set_block_info(struct sdhci_host *host, + struct mmc_data *data) +{ + /* Set the DMA boundary value and block size */ + sdhci_writew(host, + SDHCI_MAKE_BLKSZ(host->sdma_boundary, data->blksz), + SDHCI_BLOCK_SIZE); + /* + * For Version 4.10 onwards, if v4 mode is enabled, 32-bit Block Count + * can be supported, in that case 16-bit block count register must be 0. + */ + if (host->version >= SDHCI_SPEC_410 && host->v4_mode && + (host->quirks2 & SDHCI_QUIRK2_USE_32BIT_BLK_CNT)) { + if (sdhci_readw(host, SDHCI_BLOCK_COUNT)) + sdhci_writew(host, 0, SDHCI_BLOCK_COUNT); + sdhci_writew(host, data->blocks, SDHCI_32BIT_BLK_CNT); + } else { + sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT); + } +} + +static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) +{ + struct mmc_data *data = cmd->data; + + sdhci_initialize_data(host, data); if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { struct scatterlist *sg; @@ -1133,24 +1156,192 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) sdhci_set_transfer_irqs(host); - /* Set the DMA boundary value and block size */ - sdhci_writew(host, SDHCI_MAKE_BLKSZ(host->sdma_boundary, data->blksz), - SDHCI_BLOCK_SIZE); + sdhci_set_block_info(host, data); +} - /* - * For Version 4.10 onwards, if v4 mode is enabled, 32-bit Block Count - * can be supported, in that case 16-bit block count register must be 0. - */ - if (host->version >= SDHCI_SPEC_410 && host->v4_mode && - (host->quirks2 & SDHCI_QUIRK2_USE_32BIT_BLK_CNT)) { - if (sdhci_readw(host, SDHCI_BLOCK_COUNT)) - sdhci_writew(host, 0, SDHCI_BLOCK_COUNT); - sdhci_writew(host, data->blocks, SDHCI_32BIT_BLK_CNT); +#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA) + +static int sdhci_external_dma_init(struct sdhci_host *host) +{ + int ret = 0; + struct mmc_host *mmc = host->mmc; + + host->tx_chan = dma_request_chan(mmc->parent, "tx"); + if (IS_ERR(host->tx_chan)) { + ret = PTR_ERR(host->tx_chan); + if (ret != -EPROBE_DEFER) + pr_warn("Failed to request TX DMA channel.\n"); + host->tx_chan = NULL; + return ret; + } + + host->rx_chan = dma_request_chan(mmc->parent, "rx"); + if (IS_ERR(host->rx_chan)) { + if (host->tx_chan) { + dma_release_channel(host->tx_chan); + host->tx_chan = NULL; + } + + ret = PTR_ERR(host->rx_chan); + if (ret != -EPROBE_DEFER) + pr_warn("Failed to request RX DMA channel.\n"); + host->rx_chan = NULL; + } + + return ret; +} + +static struct dma_chan *sdhci_external_dma_channel(struct sdhci_host *host, + struct mmc_data *data) +{ + return data->flags & MMC_DATA_WRITE ? host->tx_chan : host->rx_chan; +} + +static int sdhci_external_dma_setup(struct sdhci_host *host, + struct mmc_command *cmd) +{ + int ret, i; + enum dma_transfer_direction dir; + struct dma_async_tx_descriptor *desc; + struct mmc_data *data = cmd->data; + struct dma_chan *chan; + struct dma_slave_config cfg; + dma_cookie_t cookie; + int sg_cnt; + + if (!host->mapbase) + return -EINVAL; + + cfg.src_addr = host->mapbase + SDHCI_BUFFER; + cfg.dst_addr = host->mapbase + SDHCI_BUFFER; + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + cfg.src_maxburst = data->blksz / 4; + cfg.dst_maxburst = data->blksz / 4; + + /* Sanity check: all the SG entries must be aligned by block size. */ + for (i = 0; i < data->sg_len; i++) { + if ((data->sg + i)->length % data->blksz) + return -EINVAL; + } + + chan = sdhci_external_dma_channel(host, data); + + ret = dmaengine_slave_config(chan, &cfg); + if (ret) + return ret; + + sg_cnt = sdhci_pre_dma_transfer(host, data, COOKIE_MAPPED); + if (sg_cnt <= 0) + return -EINVAL; + + dir = data->flags & MMC_DATA_WRITE ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM; + desc = dmaengine_prep_slave_sg(chan, data->sg, data->sg_len, dir, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) + return -EINVAL; + + desc->callback = NULL; + desc->callback_param = NULL; + + cookie = dmaengine_submit(desc); + if (dma_submit_error(cookie)) + ret = cookie; + + return ret; +} + +static void sdhci_external_dma_release(struct sdhci_host *host) +{ + if (host->tx_chan) { + dma_release_channel(host->tx_chan); + host->tx_chan = NULL; + } + + if (host->rx_chan) { + dma_release_channel(host->rx_chan); + host->rx_chan = NULL; + } + + sdhci_switch_external_dma(host, false); +} + +static void __sdhci_external_dma_prepare_data(struct sdhci_host *host, + struct mmc_command *cmd) +{ + struct mmc_data *data = cmd->data; + + sdhci_initialize_data(host, data); + + host->flags |= SDHCI_REQ_USE_DMA; + sdhci_set_transfer_irqs(host); + + sdhci_set_block_info(host, data); +} + +static void sdhci_external_dma_prepare_data(struct sdhci_host *host, + struct mmc_command *cmd) +{ + if (!sdhci_external_dma_setup(host, cmd)) { + __sdhci_external_dma_prepare_data(host, cmd); } else { - sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT); + sdhci_external_dma_release(host); + pr_err("%s: Cannot use external DMA, switch to the DMA/PIO which standard SDHCI provides.\n", + mmc_hostname(host->mmc)); + sdhci_prepare_data(host, cmd); } } +static void sdhci_external_dma_pre_transfer(struct sdhci_host *host, + struct mmc_command *cmd) +{ + struct dma_chan *chan; + + if (!cmd->data) + return; + + chan = sdhci_external_dma_channel(host, cmd->data); + if (chan) + dma_async_issue_pending(chan); +} + +#else + +static inline int sdhci_external_dma_init(struct sdhci_host *host) +{ + return -EOPNOTSUPP; +} + +static inline void sdhci_external_dma_release(struct sdhci_host *host) +{ +} + +static inline void sdhci_external_dma_prepare_data(struct sdhci_host *host, + struct mmc_command *cmd) +{ + /* This should never happen */ + WARN_ON_ONCE(1); +} + +static inline void sdhci_external_dma_pre_transfer(struct sdhci_host *host, + struct mmc_command *cmd) +{ +} + +static inline struct dma_chan *sdhci_external_dma_channel(struct sdhci_host *host, + struct mmc_data *data) +{ + return NULL; +} + +#endif + +void sdhci_switch_external_dma(struct sdhci_host *host, bool en) +{ + host->use_external_dma = en; +} +EXPORT_SYMBOL_GPL(sdhci_switch_external_dma); + static inline bool sdhci_auto_cmd12(struct sdhci_host *host, struct mmc_request *mrq) { @@ -1245,22 +1436,10 @@ static bool sdhci_needs_reset(struct sdhci_host *host, struct mmc_request *mrq) (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))); } -static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) +static void sdhci_set_mrq_done(struct sdhci_host *host, struct mmc_request *mrq) { int i; - if (host->cmd && host->cmd->mrq == mrq) - host->cmd = NULL; - - if (host->data_cmd && host->data_cmd->mrq == mrq) - host->data_cmd = NULL; - - if (host->data && host->data->mrq == mrq) - host->data = NULL; - - if (sdhci_needs_reset(host, mrq)) - host->pending_reset = true; - for (i = 0; i < SDHCI_MAX_MRQS; i++) { if (host->mrqs_done[i] == mrq) { WARN_ON(1); @@ -1276,6 +1455,23 @@ static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) } WARN_ON(i >= SDHCI_MAX_MRQS); +} + +static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) +{ + if (host->cmd && host->cmd->mrq == mrq) + host->cmd = NULL; + + if (host->data_cmd && host->data_cmd->mrq == mrq) + host->data_cmd = NULL; + + if (host->data && host->data->mrq == mrq) + host->data = NULL; + + if (sdhci_needs_reset(host, mrq)) + host->pending_reset = true; + + sdhci_set_mrq_done(host, mrq); sdhci_del_timer(host, mrq); @@ -1326,12 +1522,12 @@ static void sdhci_finish_data(struct sdhci_host *host) /* * Need to send CMD12 if - - * a) open-ended multiblock transfer (no CMD23) + * a) open-ended multiblock transfer not using auto CMD12 (no CMD23) * b) error in multiblock transfer */ if (data->stop && - (data->error || - !data->mrq->sbc)) { + ((!data->mrq->sbc && !sdhci_auto_cmd12(host, data->mrq)) || + data->error)) { /* * 'cap_cmd_during_tfr' request must not use the command line * after mmc_command_done() has been called. It is upper layer's @@ -1390,12 +1586,19 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) } host->cmd = cmd; + host->data_timeout = 0; if (sdhci_data_line_cmd(cmd)) { WARN_ON(host->data_cmd); host->data_cmd = cmd; + sdhci_set_timeout(host, cmd); } - sdhci_prepare_data(host, cmd); + if (cmd->data) { + if (host->use_external_dma) + sdhci_external_dma_prepare_data(host, cmd); + else + sdhci_prepare_data(host, cmd); + } sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT); @@ -1437,6 +1640,9 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) timeout += 10 * HZ; sdhci_mod_timer(host, cmd->mrq, timeout); + if (host->use_external_dma) + sdhci_external_dma_pre_transfer(host, cmd); + sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND); } EXPORT_SYMBOL_GPL(sdhci_send_command); @@ -1825,17 +2031,6 @@ void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) sdhci_led_activate(host); - /* - * Ensure we don't send the STOP for non-SET_BLOCK_COUNTED - * requests if Auto-CMD12 is enabled. - */ - if (sdhci_auto_cmd12(host, mrq)) { - if (mrq->stop) { - mrq->data->stop = NULL; - mrq->stop = NULL; - } - } - if (!present || host->flags & SDHCI_DEVICE_DEAD) { mrq->cmd->error = -ENOMEDIUM; sdhci_finish_mrq(host, mrq); @@ -2661,6 +2856,17 @@ static bool sdhci_request_done(struct sdhci_host *host) if (host->flags & SDHCI_REQ_USE_DMA) { struct mmc_data *data = mrq->data; + if (host->use_external_dma && data && + (mrq->cmd->error || data->error)) { + struct dma_chan *chan = sdhci_external_dma_channel(host, data); + + host->mrqs_done[i] = NULL; + spin_unlock_irqrestore(&host->lock, flags); + dmaengine_terminate_sync(chan); + spin_lock_irqsave(&host->lock, flags); + sdhci_set_mrq_done(host, mrq); + } + if (data && data->host_cookie == COOKIE_MAPPED) { if (host->bounce_buffer) { /* @@ -3796,6 +4002,21 @@ int sdhci_setup_host(struct sdhci_host *host) if (sdhci_can_64bit_dma(host)) host->flags |= SDHCI_USE_64_BIT_DMA; + if (host->use_external_dma) { + ret = sdhci_external_dma_init(host); + if (ret == -EPROBE_DEFER) + goto unreg; + /* + * Fall back to use the DMA/PIO integrated in standard SDHCI + * instead of external DMA devices. + */ + else if (ret) + sdhci_switch_external_dma(host, false); + /* Disable internal DMA sources */ + else + host->flags &= ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA); + } + if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { if (host->ops->set_dma_mask) ret = host->ops->set_dma_mask(host); @@ -3822,15 +4043,13 @@ int sdhci_setup_host(struct sdhci_host *host) dma_addr_t dma; void *buf; - if (host->flags & SDHCI_USE_64_BIT_DMA) { - host->adma_table_sz = host->adma_table_cnt * - SDHCI_ADMA2_64_DESC_SZ(host); - host->desc_sz = SDHCI_ADMA2_64_DESC_SZ(host); - } else { - host->adma_table_sz = host->adma_table_cnt * - SDHCI_ADMA2_32_DESC_SZ; - host->desc_sz = SDHCI_ADMA2_32_DESC_SZ; - } + if (!(host->flags & SDHCI_USE_64_BIT_DMA)) + host->alloc_desc_sz = SDHCI_ADMA2_32_DESC_SZ; + else if (!host->alloc_desc_sz) + host->alloc_desc_sz = SDHCI_ADMA2_64_DESC_SZ(host); + + host->desc_sz = host->alloc_desc_sz; + host->adma_table_sz = host->adma_table_cnt * host->desc_sz; host->align_buffer_sz = SDHCI_MAX_SEGS * SDHCI_ADMA2_ALIGN; /* @@ -4278,6 +4497,10 @@ void sdhci_cleanup_host(struct sdhci_host *host) dma_free_coherent(mmc_dev(mmc), host->align_buffer_sz + host->adma_table_sz, host->align_buffer, host->align_addr); + + if (host->use_external_dma) + sdhci_external_dma_release(host); + host->adma_table = NULL; host->align_buffer = NULL; } @@ -4323,6 +4546,7 @@ int __sdhci_add_host(struct sdhci_host *host) pr_info("%s: SDHCI controller on %s [%s] using %s\n", mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)), + host->use_external_dma ? "External DMA" : (host->flags & SDHCI_USE_ADMA) ? (host->flags & SDHCI_USE_64_BIT_DMA) ? "ADMA 64-bit" : "ADMA" : (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO"); @@ -4411,6 +4635,9 @@ void sdhci_remove_host(struct sdhci_host *host, int dead) host->adma_table_sz, host->align_buffer, host->align_addr); + if (host->use_external_dma) + sdhci_external_dma_release(host); + host->adma_table = NULL; host->align_buffer = NULL; } diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index fe83ece6965b..a6a3ddcf97e7 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -487,6 +487,7 @@ struct sdhci_host { int irq; /* Device IRQ */ void __iomem *ioaddr; /* Mapped address */ + phys_addr_t mapbase; /* physical address base */ char *bounce_buffer; /* For packing SDMA reads/writes */ dma_addr_t bounce_addr; unsigned int bounce_buffer_size; @@ -535,6 +536,7 @@ struct sdhci_host { bool pending_reset; /* Cmd/data reset is pending */ bool irq_wake_enabled; /* IRQ wakeup is enabled */ bool v4_mode; /* Host Version 4 Enable */ + bool use_external_dma; /* Host selects to use external DMA */ struct mmc_request *mrqs_done[SDHCI_MAX_MRQS]; /* Requests done */ struct mmc_command *cmd; /* Current command */ @@ -556,7 +558,8 @@ struct sdhci_host { dma_addr_t adma_addr; /* Mapped ADMA descr. table */ dma_addr_t align_addr; /* Mapped bounce buffer */ - unsigned int desc_sz; /* ADMA descriptor size */ + unsigned int desc_sz; /* ADMA current descriptor size */ + unsigned int alloc_desc_sz; /* ADMA descr. max size host supports */ struct workqueue_struct *complete_wq; /* Request completion wq */ struct work_struct complete_work; /* Request completion work */ @@ -564,6 +567,11 @@ struct sdhci_host { struct timer_list timer; /* Timer for timeouts */ struct timer_list data_timer; /* Timer for data timeouts */ +#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA) + struct dma_chan *rx_chan; + struct dma_chan *tx_chan; +#endif + u32 caps; /* CAPABILITY_0 */ u32 caps1; /* CAPABILITY_1 */ bool read_caps; /* Capability flags have been read */ @@ -795,5 +803,8 @@ void sdhci_end_tuning(struct sdhci_host *host); void sdhci_reset_tuning(struct sdhci_host *host); void sdhci_send_tuning(struct sdhci_host *host, u32 opcode); void sdhci_abort_tuning(struct sdhci_host *host, u32 opcode); +void sdhci_switch_external_dma(struct sdhci_host *host, bool en); +void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable); +void __sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd); #endif /* __SDHCI_HW_H */ diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c index b8fe94fd9525..3afea580fbea 100644 --- a/drivers/mmc/host/sdhci_am654.c +++ b/drivers/mmc/host/sdhci_am654.c @@ -505,7 +505,6 @@ static int sdhci_am654_probe(struct platform_device *pdev) struct sdhci_am654_data *sdhci_am654; const struct of_device_id *match; struct sdhci_host *host; - struct resource *res; struct clk *clk_xin; struct device *dev = &pdev->dev; void __iomem *base; @@ -538,8 +537,7 @@ static int sdhci_am654_probe(struct platform_device *pdev) goto pm_runtime_disable; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - base = devm_ioremap_resource(dev, res); + base = devm_platform_ioremap_resource(pdev, 1); if (IS_ERR(base)) { ret = PTR_ERR(base); goto pm_runtime_put; diff --git a/drivers/mmc/host/sdhci_f_sdh30.c b/drivers/mmc/host/sdhci_f_sdh30.c index fa0dfc657c22..4625cc071b61 100644 --- a/drivers/mmc/host/sdhci_f_sdh30.c +++ b/drivers/mmc/host/sdhci_f_sdh30.c @@ -89,7 +89,6 @@ static int sdhci_f_sdh30_probe(struct platform_device *pdev) { struct sdhci_host *host; struct device *dev = &pdev->dev; - struct resource *res; int irq, ctrl = 0, ret = 0; struct f_sdhost_priv *priv; u32 reg = 0; @@ -123,8 +122,7 @@ static int sdhci_f_sdh30_probe(struct platform_device *pdev) host->ops = &sdhci_f_sdh30_ops; host->irq = irq; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - host->ioaddr = devm_ioremap_resource(&pdev->dev, res); + host->ioaddr = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(host->ioaddr)) { ret = PTR_ERR(host->ioaddr); goto err; diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index 98c575de43c7..7e1fd557109c 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -432,8 +432,12 @@ static void sh_mmcif_request_dma(struct sh_mmcif_host *host) host->chan_rx = sh_mmcif_request_dma_pdata(host, pdata->slave_id_rx); } else { - host->chan_tx = dma_request_slave_channel(dev, "tx"); - host->chan_rx = dma_request_slave_channel(dev, "rx"); + host->chan_tx = dma_request_chan(dev, "tx"); + if (IS_ERR(host->chan_tx)) + host->chan_tx = NULL; + host->chan_rx = dma_request_chan(dev, "rx"); + if (IS_ERR(host->chan_rx)) + host->chan_rx = NULL; } dev_dbg(dev, "%s: got channel TX %p RX %p\n", __func__, host->chan_tx, host->chan_rx); @@ -1388,7 +1392,6 @@ static int sh_mmcif_probe(struct platform_device *pdev) struct sh_mmcif_host *host; struct device *dev = &pdev->dev; struct sh_mmcif_plat_data *pd = dev->platform_data; - struct resource *res; void __iomem *reg; const char *name; @@ -1397,8 +1400,7 @@ static int sh_mmcif_probe(struct platform_device *pdev) if (irq[0] < 0) return -ENXIO; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - reg = devm_ioremap_resource(dev, res); + reg = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(reg)) return PTR_ERR(reg); diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c index d577a6b0ceae..f87d7967457f 100644 --- a/drivers/mmc/host/sunxi-mmc.c +++ b/drivers/mmc/host/sunxi-mmc.c @@ -1273,8 +1273,7 @@ static int sunxi_mmc_resource_request(struct sunxi_mmc_host *host, if (ret) return ret; - host->reg_base = devm_ioremap_resource(&pdev->dev, - platform_get_resource(pdev, IORESOURCE_MEM, 0)); + host->reg_base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(host->reg_base)) return PTR_ERR(host->reg_base); diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c index c4a1d49fbea4..1e424bcdbd5f 100644 --- a/drivers/mmc/host/tmio_mmc_core.c +++ b/drivers/mmc/host/tmio_mmc_core.c @@ -1109,12 +1109,10 @@ struct tmio_mmc_host *tmio_mmc_host_alloc(struct platform_device *pdev, { struct tmio_mmc_host *host; struct mmc_host *mmc; - struct resource *res; void __iomem *ctl; int ret; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - ctl = devm_ioremap_resource(&pdev->dev, res); + ctl = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(ctl)) return ERR_CAST(ctl); @@ -1181,7 +1179,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host) * Look for a card detect GPIO, if it fails with anything * else than a probe deferral, just live without it. */ - ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL); + ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0); if (ret == -EPROBE_DEFER) return ret; diff --git a/drivers/mmc/host/uniphier-sd.c b/drivers/mmc/host/uniphier-sd.c index 0c72ec5546c3..a1683c49cb90 100644 --- a/drivers/mmc/host/uniphier-sd.c +++ b/drivers/mmc/host/uniphier-sd.c @@ -59,7 +59,6 @@ struct uniphier_sd_priv { struct tmio_mmc_data tmio_data; struct pinctrl *pinctrl; - struct pinctrl_state *pinstate_default; struct pinctrl_state *pinstate_uhs; struct clk *clk; struct reset_control *rst; @@ -500,13 +499,12 @@ static int uniphier_sd_start_signal_voltage_switch(struct mmc_host *mmc, { struct tmio_mmc_host *host = mmc_priv(mmc); struct uniphier_sd_priv *priv = uniphier_sd_priv(host); - struct pinctrl_state *pinstate; + struct pinctrl_state *pinstate = NULL; u32 val, tmp; switch (ios->signal_voltage) { case MMC_SIGNAL_VOLTAGE_330: val = UNIPHIER_SD_VOLT_330; - pinstate = priv->pinstate_default; break; case MMC_SIGNAL_VOLTAGE_180: val = UNIPHIER_SD_VOLT_180; @@ -521,7 +519,10 @@ static int uniphier_sd_start_signal_voltage_switch(struct mmc_host *mmc, tmp |= FIELD_PREP(UNIPHIER_SD_VOLT_MASK, val); writel(tmp, host->ctl + UNIPHIER_SD_VOLT); - pinctrl_select_state(priv->pinctrl, pinstate); + if (pinstate) + pinctrl_select_state(priv->pinctrl, pinstate); + else + pinctrl_select_default_state(mmc_dev(mmc)); return 0; } @@ -533,11 +534,6 @@ static int uniphier_sd_uhs_init(struct tmio_mmc_host *host, if (IS_ERR(priv->pinctrl)) return PTR_ERR(priv->pinctrl); - priv->pinstate_default = pinctrl_lookup_state(priv->pinctrl, - PINCTRL_STATE_DEFAULT); - if (IS_ERR(priv->pinstate_default)) - return PTR_ERR(priv->pinstate_default); - priv->pinstate_uhs = pinctrl_lookup_state(priv->pinctrl, "uhs"); if (IS_ERR(priv->pinstate_uhs)) return PTR_ERR(priv->pinstate_uhs); diff --git a/drivers/mmc/host/usdhi6rol0.c b/drivers/mmc/host/usdhi6rol0.c index b11ac2314328..9a0b1e4e405d 100644 --- a/drivers/mmc/host/usdhi6rol0.c +++ b/drivers/mmc/host/usdhi6rol0.c @@ -199,7 +199,6 @@ struct usdhi6_host { /* Pin control */ struct pinctrl *pinctrl; - struct pinctrl_state *pins_default; struct pinctrl_state *pins_uhs; }; @@ -677,12 +676,14 @@ static void usdhi6_dma_request(struct usdhi6_host *host, phys_addr_t start) }; int ret; - host->chan_tx = dma_request_slave_channel(mmc_dev(host->mmc), "tx"); + host->chan_tx = dma_request_chan(mmc_dev(host->mmc), "tx"); dev_dbg(mmc_dev(host->mmc), "%s: TX: got channel %p\n", __func__, host->chan_tx); - if (!host->chan_tx) + if (IS_ERR(host->chan_tx)) { + host->chan_tx = NULL; return; + } cfg.direction = DMA_MEM_TO_DEV; cfg.dst_addr = start + USDHI6_SD_BUF0; @@ -692,12 +693,14 @@ static void usdhi6_dma_request(struct usdhi6_host *host, phys_addr_t start) if (ret < 0) goto e_release_tx; - host->chan_rx = dma_request_slave_channel(mmc_dev(host->mmc), "rx"); + host->chan_rx = dma_request_chan(mmc_dev(host->mmc), "rx"); dev_dbg(mmc_dev(host->mmc), "%s: RX: got channel %p\n", __func__, host->chan_rx); - if (!host->chan_rx) + if (IS_ERR(host->chan_rx)) { + host->chan_rx = NULL; goto e_release_tx; + } cfg.direction = DMA_DEV_TO_MEM; cfg.src_addr = cfg.dst_addr; @@ -1162,8 +1165,7 @@ static int usdhi6_set_pinstates(struct usdhi6_host *host, int voltage) host->pins_uhs); default: - return pinctrl_select_state(host->pinctrl, - host->pins_default); + return pinctrl_select_default_state(mmc_dev(host->mmc)); } } @@ -1770,17 +1772,6 @@ static int usdhi6_probe(struct platform_device *pdev) } host->pins_uhs = pinctrl_lookup_state(host->pinctrl, "state_uhs"); - if (!IS_ERR(host->pins_uhs)) { - host->pins_default = pinctrl_lookup_state(host->pinctrl, - PINCTRL_STATE_DEFAULT); - - if (IS_ERR(host->pins_default)) { - dev_err(dev, - "UHS pinctrl requires a default pin state.\n"); - ret = PTR_ERR(host->pins_default); - goto e_free_mmc; - } - } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); host->base = devm_ioremap_resource(dev, res); diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 2bbd8ee93507..46600d9380ea 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -1535,15 +1535,8 @@ int pinctrl_init_done(struct device *dev) return ret; } -#ifdef CONFIG_PM - -/** - * pinctrl_pm_select_state() - select pinctrl state for PM - * @dev: device to select default state for - * @state: state to set - */ -static int pinctrl_pm_select_state(struct device *dev, - struct pinctrl_state *state) +static int pinctrl_select_bound_state(struct device *dev, + struct pinctrl_state *state) { struct dev_pin_info *pins = dev->pins; int ret; @@ -1558,15 +1551,27 @@ static int pinctrl_pm_select_state(struct device *dev, } /** - * pinctrl_pm_select_default_state() - select default pinctrl state for PM + * pinctrl_select_default_state() - select default pinctrl state * @dev: device to select default state for */ -int pinctrl_pm_select_default_state(struct device *dev) +int pinctrl_select_default_state(struct device *dev) { if (!dev->pins) return 0; - return pinctrl_pm_select_state(dev, dev->pins->default_state); + return pinctrl_select_bound_state(dev, dev->pins->default_state); +} +EXPORT_SYMBOL_GPL(pinctrl_select_default_state); + +#ifdef CONFIG_PM + +/** + * pinctrl_pm_select_default_state() - select default pinctrl state for PM + * @dev: device to select default state for + */ +int pinctrl_pm_select_default_state(struct device *dev) +{ + return pinctrl_select_default_state(dev); } EXPORT_SYMBOL_GPL(pinctrl_pm_select_default_state); @@ -1579,7 +1584,7 @@ int pinctrl_pm_select_sleep_state(struct device *dev) if (!dev->pins) return 0; - return pinctrl_pm_select_state(dev, dev->pins->sleep_state); + return pinctrl_select_bound_state(dev, dev->pins->sleep_state); } EXPORT_SYMBOL_GPL(pinctrl_pm_select_sleep_state); @@ -1592,7 +1597,7 @@ int pinctrl_pm_select_idle_state(struct device *dev) if (!dev->pins) return 0; - return pinctrl_pm_select_state(dev, dev->pins->idle_state); + return pinctrl_select_bound_state(dev, dev->pins->idle_state); } EXPORT_SYMBOL_GPL(pinctrl_pm_select_idle_state); #endif |