usb: dwc2: Move dwc2_readl/writel functions after hsotg structure

Moved dwc2_readl/writel functions after hsotg declaration for
adding hsotg structure to dwc2_readl/writel function prototypes.

Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Gevorg Sahakyan <sahakyan@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

1 files changed, 54 insertions, 54 deletions

diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 71b3b08ad516..8a9272a2c82c 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -65,60 +65,6 @@
 	DWC2_TRACE_SCHEDULER_VB(pr_fmt("%s: SCH: " fmt),		\
 				dev_name(hsotg->dev), ##__VA_ARGS__)
 
-#ifdef CONFIG_MIPS
-/*
- * There are some MIPS machines that can run in either big-endian
- * or little-endian mode and that use the dwc2 register without
- * a byteswap in both ways.
- * Unlike other architectures, MIPS apparently does not require a
- * barrier before the __raw_writel() to synchronize with DMA but does
- * require the barrier after the __raw_writel() to serialize a set of
- * writes. This set of operations was added specifically for MIPS and
- * should only be used there.
- */
-static inline u32 dwc2_readl(const void __iomem *addr)
-{
-	u32 value = __raw_readl(addr);
-
-	/* In order to preserve endianness __raw_* operation is used. Therefore
-	 * a barrier is needed to ensure IO access is not re-ordered across
-	 * reads or writes
-	 */
-	mb();
-	return value;
-}
-
-static inline void dwc2_writel(u32 value, void __iomem *addr)
-{
-	__raw_writel(value, addr);
-
-	/*
-	 * In order to preserve endianness __raw_* operation is used. Therefore
-	 * a barrier is needed to ensure IO access is not re-ordered across
-	 * reads or writes
-	 */
-	mb();
-#ifdef DWC2_LOG_WRITES
-	pr_info("INFO:: wrote %08x to %p\n", value, addr);
-#endif
-}
-#else
-/* Normal architectures just use readl/write */
-static inline u32 dwc2_readl(const void __iomem *addr)
-{
-	return readl(addr);
-}
-
-static inline void dwc2_writel(u32 value, void __iomem *addr)
-{
-	writel(value, addr);
-
-#ifdef DWC2_LOG_WRITES
-	pr_info("info:: wrote %08x to %p\n", value, addr);
-#endif
-}
-#endif
-
 /* Maximum number of Endpoints/HostChannels */
 #define MAX_EPS_CHANNELS	16
 
@@ -1215,6 +1161,60 @@ struct dwc2_hsotg {
 #endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
 };
 
+#ifdef CONFIG_MIPS
+/*
+ * There are some MIPS machines that can run in either big-endian
+ * or little-endian mode and that use the dwc2 register without
+ * a byteswap in both ways.
+ * Unlike other architectures, MIPS apparently does not require a
+ * barrier before the __raw_writel() to synchronize with DMA but does
+ * require the barrier after the __raw_writel() to serialize a set of
+ * writes. This set of operations was added specifically for MIPS and
+ * should only be used there.
+ */
+static inline u32 dwc2_readl(const void __iomem *addr)
+{
+	u32 value = __raw_readl(addr);
+
+	/* In order to preserve endianness __raw_* operation is used. Therefore
+	 * a barrier is needed to ensure IO access is not re-ordered across
+	 * reads or writes
+	 */
+	mb();
+	return value;
+}
+
+static inline void dwc2_writel(u32 value, void __iomem *addr)
+{
+	__raw_writel(value, addr);
+
+	/*
+	 * In order to preserve endianness __raw_* operation is used. Therefore
+	 * a barrier is needed to ensure IO access is not re-ordered across
+	 * reads or writes
+	 */
+	mb();
+#ifdef DWC2_LOG_WRITES
+	pr_info("INFO:: wrote %08x to %p\n", value, addr);
+#endif
+}
+#else
+/* Normal architectures just use readl/write */
+static inline u32 dwc2_readl(const void __iomem *addr)
+{
+	return readl(addr);
+}
+
+static inline void dwc2_writel(u32 value, void __iomem *addr)
+{
+	writel(value, addr);
+
+#ifdef DWC2_LOG_WRITES
+	pr_info("info:: wrote %08x to %p\n", value, addr);
+#endif
+}
+#endif
+
 /* Reasons for halting a host channel */
 enum dwc2_halt_status {
 	DWC2_HC_XFER_NO_HALT_STATUS,