Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

Pull thermal management updates from Zhang Rui:

 - Add locking for cooling device sysfs attribute in case the cooling
   device state is changed by userspace and thermal framework
   simultaneously. (Thara Gopinath)

 - Fix a problem that passive cooling is reset improperly after system
   suspend/resume. (Wei Wang)

 - Cleanup the driver/thermal/ directory by moving intel and qcom
   platform specific drivers to platform specific sub-directories. (Amit
   Kucheria)

 - Some trivial cleanups. (Lukasz Luba, Wolfram Sang)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal/intel: fixup for Kconfig string parsing tightening up
  drivers: thermal: Move QCOM_SPMI_TEMP_ALARM into the qcom subdir
  drivers: thermal: Move various drivers for intel platforms into a subdir
  thermal: Fix locking in cooling device sysfs update cur_state
  Thermal: do not clear passive state during system sleep
  thermal: zx2967_thermal: simplify getting .driver_data
  thermal: st: st_thermal: simplify getting .driver_data
  thermal: spear_thermal: simplify getting .driver_data
  thermal: rockchip_thermal: simplify getting .driver_data
  thermal: int340x_thermal: int3400_thermal: simplify getting .driver_data
  thermal: remove unused function parameter

3 files changed, 477 insertions, 0 deletions

diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig
index be32e5abce3c..cdb455ffd575 100644
--- a/drivers/thermal/qcom/Kconfig
+++ b/drivers/thermal/qcom/Kconfig
@@ -9,3 +9,14 @@ config QCOM_TSENS
 	  thermal zone device via the mode file results in disabling the sensor.
 	  Also able to set threshold temperature for both hot and cold and update
 	  when a threshold is reached.
+
+config QCOM_SPMI_TEMP_ALARM
+	tristate "Qualcomm SPMI PMIC Temperature Alarm"
+	depends on OF && SPMI && IIO
+	select REGMAP_SPMI
+	help
+	  This enables a thermal sysfs driver for Qualcomm plug-and-play (QPNP)
+	  PMIC devices. It shows up in sysfs as a thermal sensor with multiple
+	  trip points. The temperature reported by the thermal sensor reflects the
+	  real time die temperature if an ADC is present or an estimate of the
+	  temperature based upon the over temperature stage value.
diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
index a821929ede0b..717a08600bb5 100644
--- a/drivers/thermal/qcom/Makefile
+++ b/drivers/thermal/qcom/Makefile
@@ -1,2 +1,3 @@
 obj-$(CONFIG_QCOM_TSENS)	+= qcom_tsens.o
 qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-v2.o
+obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM)	+= qcom-spmi-temp-alarm.o
diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
new file mode 100644
index 000000000000..c1fd71dbab3e
--- /dev/null
+++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
@@ -0,0 +1,465 @@
+/*
+ * Copyright (c) 2011-2015, 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/iio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/thermal.h>
+
+#include "../thermal_core.h"
+
+#define QPNP_TM_REG_TYPE		0x04
+#define QPNP_TM_REG_SUBTYPE		0x05
+#define QPNP_TM_REG_STATUS		0x08
+#define QPNP_TM_REG_SHUTDOWN_CTRL1	0x40
+#define QPNP_TM_REG_ALARM_CTRL		0x46
+
+#define QPNP_TM_TYPE			0x09
+#define QPNP_TM_SUBTYPE_GEN1		0x08
+#define QPNP_TM_SUBTYPE_GEN2		0x09
+
+#define STATUS_GEN1_STAGE_MASK		GENMASK(1, 0)
+#define STATUS_GEN2_STATE_MASK		GENMASK(6, 4)
+#define STATUS_GEN2_STATE_SHIFT		4
+
+#define SHUTDOWN_CTRL1_OVERRIDE_S2	BIT(6)
+#define SHUTDOWN_CTRL1_THRESHOLD_MASK	GENMASK(1, 0)
+
+#define SHUTDOWN_CTRL1_RATE_25HZ	BIT(3)
+
+#define ALARM_CTRL_FORCE_ENABLE		BIT(7)
+
+/*
+ * Trip point values based on threshold control
+ * 0 = {105 C, 125 C, 145 C}
+ * 1 = {110 C, 130 C, 150 C}
+ * 2 = {115 C, 135 C, 155 C}
+ * 3 = {120 C, 140 C, 160 C}
+*/
+#define TEMP_STAGE_STEP			20000	/* Stage step: 20.000 C */
+#define TEMP_STAGE_HYSTERESIS		2000
+
+#define TEMP_THRESH_MIN			105000	/* Threshold Min: 105 C */
+#define TEMP_THRESH_STEP		5000	/* Threshold step: 5 C */
+
+#define THRESH_MIN			0
+#define THRESH_MAX			3
+
+/* Stage 2 Threshold Min: 125 C */
+#define STAGE2_THRESHOLD_MIN		125000
+/* Stage 2 Threshold Max: 140 C */
+#define STAGE2_THRESHOLD_MAX		140000
+
+/* Temperature in Milli Celsius reported during stage 0 if no ADC is present */
+#define DEFAULT_TEMP			37000
+
+struct qpnp_tm_chip {
+	struct regmap			*map;
+	struct device			*dev;
+	struct thermal_zone_device	*tz_dev;
+	unsigned int			subtype;
+	long				temp;
+	unsigned int			thresh;
+	unsigned int			stage;
+	unsigned int			prev_stage;
+	unsigned int			base;
+	/* protects .thresh, .stage and chip registers */
+	struct mutex			lock;
+	bool				initialized;
+
+	struct iio_channel		*adc;
+};
+
+/* This array maps from GEN2 alarm state to GEN1 alarm stage */
+static const unsigned int alarm_state_map[8] = {0, 1, 1, 2, 2, 3, 3, 3};
+
+static int qpnp_tm_read(struct qpnp_tm_chip *chip, u16 addr, u8 *data)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(chip->map, chip->base + addr, &val);
+	if (ret < 0)
+		return ret;
+
+	*data = val;
+	return 0;
+}
+
+static int qpnp_tm_write(struct qpnp_tm_chip *chip, u16 addr, u8 data)
+{
+	return regmap_write(chip->map, chip->base + addr, data);
+}
+
+/**
+ * qpnp_tm_get_temp_stage() - return over-temperature stage
+ * @chip:		Pointer to the qpnp_tm chip
+ *
+ * Return: stage (GEN1) or state (GEN2) on success, or errno on failure.
+ */
+static int qpnp_tm_get_temp_stage(struct qpnp_tm_chip *chip)
+{
+	int ret;
+	u8 reg = 0;
+
+	ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, &reg);
+	if (ret < 0)
+		return ret;
+
+	if (chip->subtype == QPNP_TM_SUBTYPE_GEN1)
+		ret = reg & STATUS_GEN1_STAGE_MASK;
+	else
+		ret = (reg & STATUS_GEN2_STATE_MASK) >> STATUS_GEN2_STATE_SHIFT;
+
+	return ret;
+}
+
+/*
+ * This function updates the internal temp value based on the
+ * current thermal stage and threshold as well as the previous stage
+ */
+static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip)
+{
+	unsigned int stage, stage_new, stage_old;
+	int ret;
+
+	WARN_ON(!mutex_is_locked(&chip->lock));
+
+	ret = qpnp_tm_get_temp_stage(chip);
+	if (ret < 0)
+		return ret;
+	stage = ret;
+
+	if (chip->subtype == QPNP_TM_SUBTYPE_GEN1) {
+		stage_new = stage;
+		stage_old = chip->stage;
+	} else {
+		stage_new = alarm_state_map[stage];
+		stage_old = alarm_state_map[chip->stage];
+	}
+
+	if (stage_new > stage_old) {
+		/* increasing stage, use lower bound */
+		chip->temp = (stage_new - 1) * TEMP_STAGE_STEP +
+			     chip->thresh * TEMP_THRESH_STEP +
+			     TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN;
+	} else if (stage_new < stage_old) {
+		/* decreasing stage, use upper bound */
+		chip->temp = stage_new * TEMP_STAGE_STEP +
+			     chip->thresh * TEMP_THRESH_STEP -
+			     TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN;
+	}
+
+	chip->stage = stage;
+
+	return 0;
+}
+
+static int qpnp_tm_get_temp(void *data, int *temp)
+{
+	struct qpnp_tm_chip *chip = data;
+	int ret, mili_celsius;
+
+	if (!temp)
+		return -EINVAL;
+
+	if (!chip->initialized) {
+		*temp = DEFAULT_TEMP;
+		return 0;
+	}
+
+	if (!chip->adc) {
+		mutex_lock(&chip->lock);
+		ret = qpnp_tm_update_temp_no_adc(chip);
+		mutex_unlock(&chip->lock);
+		if (ret < 0)
+			return ret;
+	} else {
+		ret = iio_read_channel_processed(chip->adc, &mili_celsius);
+		if (ret < 0)
+			return ret;
+
+		chip->temp = mili_celsius;
+	}
+
+	*temp = chip->temp < 0 ? 0 : chip->temp;
+
+	return 0;
+}
+
+static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip,
+					     int temp)
+{
+	u8 reg;
+	bool disable_s2_shutdown = false;
+
+	WARN_ON(!mutex_is_locked(&chip->lock));
+
+	/*
+	 * Default: S2 and S3 shutdown enabled, thresholds at
+	 * 105C/125C/145C, monitoring at 25Hz
+	 */
+	reg = SHUTDOWN_CTRL1_RATE_25HZ;
+
+	if (temp == THERMAL_TEMP_INVALID ||
+	    temp < STAGE2_THRESHOLD_MIN) {
+		chip->thresh = THRESH_MIN;
+		goto skip;
+	}
+
+	if (temp <= STAGE2_THRESHOLD_MAX) {
+		chip->thresh = THRESH_MAX -
+			((STAGE2_THRESHOLD_MAX - temp) /
+			 TEMP_THRESH_STEP);
+		disable_s2_shutdown = true;
+	} else {
+		chip->thresh = THRESH_MAX;
+
+		if (chip->adc)
+			disable_s2_shutdown = true;
+		else
+			dev_warn(chip->dev,
+				 "No ADC is configured and critical temperature is above the maximum stage 2 threshold of 140 C! Configuring stage 2 shutdown at 140 C.\n");
+	}
+
+skip:
+	reg |= chip->thresh;
+	if (disable_s2_shutdown)
+		reg |= SHUTDOWN_CTRL1_OVERRIDE_S2;
+
+	return qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg);
+}
+
+static int qpnp_tm_set_trip_temp(void *data, int trip, int temp)
+{
+	struct qpnp_tm_chip *chip = data;
+	const struct thermal_trip *trip_points;
+	int ret;
+
+	trip_points = of_thermal_get_trip_points(chip->tz_dev);
+	if (!trip_points)
+		return -EINVAL;
+
+	if (trip_points[trip].type != THERMAL_TRIP_CRITICAL)
+		return 0;
+
+	mutex_lock(&chip->lock);
+	ret = qpnp_tm_update_critical_trip_temp(chip, temp);
+	mutex_unlock(&chip->lock);
+
+	return ret;
+}
+
+static const struct thermal_zone_of_device_ops qpnp_tm_sensor_ops = {
+	.get_temp = qpnp_tm_get_temp,
+	.set_trip_temp = qpnp_tm_set_trip_temp,
+};
+
+static irqreturn_t qpnp_tm_isr(int irq, void *data)
+{
+	struct qpnp_tm_chip *chip = data;
+
+	thermal_zone_device_update(chip->tz_dev, THERMAL_EVENT_UNSPECIFIED);
+
+	return IRQ_HANDLED;
+}
+
+static int qpnp_tm_get_critical_trip_temp(struct qpnp_tm_chip *chip)
+{
+	int ntrips;
+	const struct thermal_trip *trips;
+	int i;
+
+	ntrips = of_thermal_get_ntrips(chip->tz_dev);
+	if (ntrips <= 0)
+		return THERMAL_TEMP_INVALID;
+
+	trips = of_thermal_get_trip_points(chip->tz_dev);
+	if (!trips)
+		return THERMAL_TEMP_INVALID;
+
+	for (i = 0; i < ntrips; i++) {
+		if (of_thermal_is_trip_valid(chip->tz_dev, i) &&
+		    trips[i].type == THERMAL_TRIP_CRITICAL)
+			return trips[i].temperature;
+	}
+
+	return THERMAL_TEMP_INVALID;
+}
+
+/*
+ * This function initializes the internal temp value based on only the
+ * current thermal stage and threshold. Setup threshold control and
+ * disable shutdown override.
+ */
+static int qpnp_tm_init(struct qpnp_tm_chip *chip)
+{
+	unsigned int stage;
+	int ret;
+	u8 reg = 0;
+	int crit_temp;
+
+	mutex_lock(&chip->lock);
+
+	ret = qpnp_tm_read(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, &reg);
+	if (ret < 0)
+		goto out;
+
+	chip->thresh = reg & SHUTDOWN_CTRL1_THRESHOLD_MASK;
+	chip->temp = DEFAULT_TEMP;
+
+	ret = qpnp_tm_get_temp_stage(chip);
+	if (ret < 0)
+		goto out;
+	chip->stage = ret;
+
+	stage = chip->subtype == QPNP_TM_SUBTYPE_GEN1
+		? chip->stage : alarm_state_map[chip->stage];
+
+	if (stage)
+		chip->temp = chip->thresh * TEMP_THRESH_STEP +
+			     (stage - 1) * TEMP_STAGE_STEP +
+			     TEMP_THRESH_MIN;
+
+	crit_temp = qpnp_tm_get_critical_trip_temp(chip);
+	ret = qpnp_tm_update_critical_trip_temp(chip, crit_temp);
+	if (ret < 0)
+		goto out;
+
+	/* Enable the thermal alarm PMIC module in always-on mode. */
+	reg = ALARM_CTRL_FORCE_ENABLE;
+	ret = qpnp_tm_write(chip, QPNP_TM_REG_ALARM_CTRL, reg);
+
+	chip->initialized = true;
+
+out:
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static int qpnp_tm_probe(struct platform_device *pdev)
+{
+	struct qpnp_tm_chip *chip;
+	struct device_node *node;
+	u8 type, subtype;
+	u32 res;
+	int ret, irq;
+
+	node = pdev->dev.of_node;
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	dev_set_drvdata(&pdev->dev, chip);
+	chip->dev = &pdev->dev;
+
+	mutex_init(&chip->lock);
+
+	chip->map = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!chip->map)
+		return -ENXIO;
+
+	ret = of_property_read_u32(node, "reg", &res);
+	if (ret < 0)
+		return ret;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	/* ADC based measurements are optional */
+	chip->adc = devm_iio_channel_get(&pdev->dev, "thermal");
+	if (IS_ERR(chip->adc)) {
+		ret = PTR_ERR(chip->adc);
+		chip->adc = NULL;
+		if (ret == -EPROBE_DEFER)
+			return ret;
+	}
+
+	chip->base = res;
+
+	ret = qpnp_tm_read(chip, QPNP_TM_REG_TYPE, &type);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "could not read type\n");
+		return ret;
+	}
+
+	ret = qpnp_tm_read(chip, QPNP_TM_REG_SUBTYPE, &subtype);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "could not read subtype\n");
+		return ret;
+	}
+
+	if (type != QPNP_TM_TYPE || (subtype != QPNP_TM_SUBTYPE_GEN1
+				     && subtype != QPNP_TM_SUBTYPE_GEN2)) {
+		dev_err(&pdev->dev, "invalid type 0x%02x or subtype 0x%02x\n",
+			type, subtype);
+		return -ENODEV;
+	}
+
+	chip->subtype = subtype;
+
+	/*
+	 * Register the sensor before initializing the hardware to be able to
+	 * read the trip points. get_temp() returns the default temperature
+	 * before the hardware initialization is completed.
+	 */
+	chip->tz_dev = devm_thermal_zone_of_sensor_register(
+		&pdev->dev, 0, chip, &qpnp_tm_sensor_ops);
+	if (IS_ERR(chip->tz_dev)) {
+		dev_err(&pdev->dev, "failed to register sensor\n");
+		return PTR_ERR(chip->tz_dev);
+	}
+
+	ret = qpnp_tm_init(chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "init failed\n");
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, qpnp_tm_isr,
+					IRQF_ONESHOT, node->name, chip);
+	if (ret < 0)
+		return ret;
+
+	thermal_zone_device_update(chip->tz_dev, THERMAL_EVENT_UNSPECIFIED);
+
+	return 0;
+}
+
+static const struct of_device_id qpnp_tm_match_table[] = {
+	{ .compatible = "qcom,spmi-temp-alarm" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, qpnp_tm_match_table);
+
+static struct platform_driver qpnp_tm_driver = {
+	.driver = {
+		.name = "spmi-temp-alarm",
+		.of_match_table = qpnp_tm_match_table,
+	},
+	.probe  = qpnp_tm_probe,
+};
+module_platform_driver(qpnp_tm_driver);
+
+MODULE_ALIAS("platform:spmi-temp-alarm");
+MODULE_DESCRIPTION("QPNP PMIC Temperature Alarm driver");
+MODULE_LICENSE("GPL v2");