Merge tag 'qcom-drivers-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers

Qualcomm driver updates for v5.6

* SCM major refactoring and cleanup
* Properly flag active only power domains as active only
* Add SC7180 and SM8150 RPMH power domains
* Return EPROBE_DEFER from QMI if packet family is not yet available

* tag 'qcom-drivers-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (27 commits)
  firmware: qcom_scm: Dynamically support SMCCC and legacy conventions
  firmware: qcom_scm: Remove thin wrappers
  firmware: qcom_scm: Order functions, definitions by service/command
  firmware: qcom_scm-32: Add device argument to atomic calls
  firmware: qcom_scm-32: Create common legacy atomic call
  firmware: qcom_scm-32: Move SMCCC register filling to qcom_scm_call
  firmware: qcom_scm-32: Use qcom_scm_desc in non-atomic calls
  firmware: qcom_scm-32: Add funcnum IDs
  firmware: qcom_scm-32: Use SMC arch wrappers
  firmware: qcom_scm-64: Improve SMC convention detection
  firmware: qcom_scm-64: Move SMC register filling to qcom_scm_call_smccc
  firmware: qcom_scm-64: Add SCM results struct
  firmware: qcom_scm-64: Move svc/cmd/owner into qcom_scm_desc
  firmware: qcom_scm-64: Make SMC macros less magical
  firmware: qcom_scm: Remove unused qcom_scm_get_version
  firmware: qcom_scm: Apply consistent naming scheme to command IDs
  firmware: qcom_scm: Rename macros and structures
  soc: qcom: rpmhpd: Set 'active_only' for active only power domains
  firmware: scm: Add stubs for OCMEM and restore_sec_cfg_available
  dt-bindings: power: rpmpd: Convert rpmpd bindings to yaml
  ...

Link: https://lore.kernel.org/r/20200113204405.GD3325@yoga
Signed-off-by: Olof Johansson <olof@lixom.net>

3 files changed, 77 insertions, 17 deletions

diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 79d826553ac8..d0a73e76d563 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -45,13 +45,13 @@ config QCOM_GLINK_SSR
 	  neighboring subsystems going up or down.
 
 config QCOM_GSBI
-        tristate "QCOM General Serial Bus Interface"
-        depends on ARCH_QCOM || COMPILE_TEST
-        select MFD_SYSCON
-        help
-          Say y here to enable GSBI support.  The GSBI provides control
-          functions for connecting the underlying serial UART, SPI, and I2C
-          devices to the output pins.
+	tristate "QCOM General Serial Bus Interface"
+	depends on ARCH_QCOM || COMPILE_TEST
+	select MFD_SYSCON
+	help
+	  Say y here to enable GSBI support.  The GSBI provides control
+	  functions for connecting the underlying serial UART, SPI, and I2C
+	  devices to the output pins.
 
 config QCOM_LLCC
 	tristate "Qualcomm Technologies, Inc. LLCC driver"
@@ -71,10 +71,10 @@ config QCOM_OCMEM
 	depends on ARCH_QCOM
 	select QCOM_SCM
 	help
-          The On Chip Memory (OCMEM) allocator allows various clients to
-          allocate memory from OCMEM based on performance, latency and power
-          requirements. This is typically used by the GPU, camera/video, and
-          audio components on some Snapdragon SoCs.
+	  The On Chip Memory (OCMEM) allocator allows various clients to
+	  allocate memory from OCMEM based on performance, latency and power
+	  requirements. This is typically used by the GPU, camera/video, and
+	  audio components on some Snapdragon SoCs.
 
 config QCOM_PM
 	bool "Qualcomm Power Management"
@@ -198,8 +198,8 @@ config QCOM_APR
 	depends on ARCH_QCOM || COMPILE_TEST
 	depends on RPMSG
 	help
-          Enable APR IPC protocol support between
-          application processor and QDSP6. APR is
-          used by audio driver to configure QDSP6
-          ASM, ADM and AFE modules.
+	  Enable APR IPC protocol support between
+	  application processor and QDSP6. APR is
+	  used by audio driver to configure QDSP6
+	  ASM, ADM and AFE modules.
 endmenu
diff --git a/drivers/soc/qcom/qmi_interface.c b/drivers/soc/qcom/qmi_interface.c
index f9e309f0acd3..1a03eaa38c46 100644
--- a/drivers/soc/qcom/qmi_interface.c
+++ b/drivers/soc/qcom/qmi_interface.c
@@ -655,8 +655,12 @@ int qmi_handle_init(struct qmi_handle *qmi, size_t recv_buf_size,
 
 	qmi->sock = qmi_sock_create(qmi, &qmi->sq);
 	if (IS_ERR(qmi->sock)) {
-		pr_err("failed to create QMI socket\n");
-		ret = PTR_ERR(qmi->sock);
+		if (PTR_ERR(qmi->sock) == -EAFNOSUPPORT) {
+			ret = -EPROBE_DEFER;
+		} else {
+			pr_err("failed to create QMI socket\n");
+			ret = PTR_ERR(qmi->sock);
+		}
 		goto err_destroy_wq;
 	}
 
diff --git a/drivers/soc/qcom/rpmhpd.c b/drivers/soc/qcom/rpmhpd.c
index 5741ec3fa814..4d264d0672c4 100644
--- a/drivers/soc/qcom/rpmhpd.c
+++ b/drivers/soc/qcom/rpmhpd.c
@@ -93,6 +93,7 @@ static struct rpmhpd sdm845_mx = {
 
 static struct rpmhpd sdm845_mx_ao = {
 	.pd = { .name = "mx_ao", },
+	.active_only = true,
 	.peer = &sdm845_mx,
 	.res_name = "mx.lvl",
 };
@@ -107,6 +108,7 @@ static struct rpmhpd sdm845_cx = {
 
 static struct rpmhpd sdm845_cx_ao = {
 	.pd = { .name = "cx_ao", },
+	.active_only = true,
 	.peer = &sdm845_cx,
 	.parent = &sdm845_mx_ao.pd,
 	.res_name = "cx.lvl",
@@ -129,8 +131,62 @@ static const struct rpmhpd_desc sdm845_desc = {
 	.num_pds = ARRAY_SIZE(sdm845_rpmhpds),
 };
 
+/* SM8150 RPMH powerdomains */
+
+static struct rpmhpd sm8150_mmcx_ao;
+static struct rpmhpd sm8150_mmcx = {
+	.pd = { .name = "mmcx", },
+	.peer = &sm8150_mmcx_ao,
+	.res_name = "mmcx.lvl",
+};
+
+static struct rpmhpd sm8150_mmcx_ao = {
+	.pd = { .name = "mmcx_ao", },
+	.active_only = true,
+	.peer = &sm8150_mmcx,
+	.res_name = "mmcx.lvl",
+};
+
+static struct rpmhpd *sm8150_rpmhpds[] = {
+	[SM8150_MSS] = &sdm845_mss,
+	[SM8150_EBI] = &sdm845_ebi,
+	[SM8150_LMX] = &sdm845_lmx,
+	[SM8150_LCX] = &sdm845_lcx,
+	[SM8150_GFX] = &sdm845_gfx,
+	[SM8150_MX] = &sdm845_mx,
+	[SM8150_MX_AO] = &sdm845_mx_ao,
+	[SM8150_CX] = &sdm845_cx,
+	[SM8150_CX_AO] = &sdm845_cx_ao,
+	[SM8150_MMCX] = &sm8150_mmcx,
+	[SM8150_MMCX_AO] = &sm8150_mmcx_ao,
+};
+
+static const struct rpmhpd_desc sm8150_desc = {
+	.rpmhpds = sm8150_rpmhpds,
+	.num_pds = ARRAY_SIZE(sm8150_rpmhpds),
+};
+
+/* SC7180 RPMH powerdomains */
+static struct rpmhpd *sc7180_rpmhpds[] = {
+	[SC7180_CX] = &sdm845_cx,
+	[SC7180_CX_AO] = &sdm845_cx_ao,
+	[SC7180_GFX] = &sdm845_gfx,
+	[SC7180_MX] = &sdm845_mx,
+	[SC7180_MX_AO] = &sdm845_mx_ao,
+	[SC7180_LMX] = &sdm845_lmx,
+	[SC7180_LCX] = &sdm845_lcx,
+	[SC7180_MSS] = &sdm845_mss,
+};
+
+static const struct rpmhpd_desc sc7180_desc = {
+	.rpmhpds = sc7180_rpmhpds,
+	.num_pds = ARRAY_SIZE(sc7180_rpmhpds),
+};
+
 static const struct of_device_id rpmhpd_match_table[] = {
+	{ .compatible = "qcom,sc7180-rpmhpd", .data = &sc7180_desc },
 	{ .compatible = "qcom,sdm845-rpmhpd", .data = &sdm845_desc },
+	{ .compatible = "qcom,sm8150-rpmhpd", .data = &sm8150_desc },
 	{ }
 };