diff options
| author | Vladimir Zapolskiy <vz@mleia.com> | 2023-07-17 17:52:57 +0200 |
|---|---|---|
| committer | Thierry Reding <thierry.reding@gmail.com> | 2023-08-22 10:14:16 +0200 |
| commit | 4aae44f65827f0213a7361cf9c32cfe06114473f (patch) | |
| tree | 921be0afdcb7539eae249e680c3a2333ca7d899d /drivers/pwm | |
| parent | b22bb0d6a828b4eab579056647d2f362ac116cf2 (diff) | |
pwm: lpc32xx: Remove handling of PWM channels
Because LPC32xx PWM controllers have only a single output which is
registered as the only PWM device/channel per controller, it is known in
advance that pwm->hwpwm value is always 0. On basis of this fact
simplify the code by removing operations with pwm->hwpwm, there is no
controls which require channel number as input.
Even though I wasn't aware at the time when I forward ported that patch,
this fixes a null pointer dereference as lpc32xx->chip.pwms is NULL
before devm_pwmchip_add() is called.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 3d2813fb17e5 ("pwm: lpc32xx: Don't modify HW state in .probe() after the PWM chip was registered")
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Diffstat (limited to 'drivers/pwm')
| -rw-r--r-- | drivers/pwm/pwm-lpc32xx.c | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/drivers/pwm/pwm-lpc32xx.c b/drivers/pwm/pwm-lpc32xx.c index 86a0ea0f6955..806f0bb3ad6d 100644 --- a/drivers/pwm/pwm-lpc32xx.c +++ b/drivers/pwm/pwm-lpc32xx.c @@ -51,10 +51,10 @@ static int lpc32xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, if (duty_cycles > 255) duty_cycles = 255; - val = readl(lpc32xx->base + (pwm->hwpwm << 2)); + val = readl(lpc32xx->base); val &= ~0xFFFF; val |= (period_cycles << 8) | duty_cycles; - writel(val, lpc32xx->base + (pwm->hwpwm << 2)); + writel(val, lpc32xx->base); return 0; } @@ -69,9 +69,9 @@ static int lpc32xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) if (ret) return ret; - val = readl(lpc32xx->base + (pwm->hwpwm << 2)); + val = readl(lpc32xx->base); val |= PWM_ENABLE; - writel(val, lpc32xx->base + (pwm->hwpwm << 2)); + writel(val, lpc32xx->base); return 0; } @@ -81,9 +81,9 @@ static void lpc32xx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) struct lpc32xx_pwm_chip *lpc32xx = to_lpc32xx_pwm_chip(chip); u32 val; - val = readl(lpc32xx->base + (pwm->hwpwm << 2)); + val = readl(lpc32xx->base); val &= ~PWM_ENABLE; - writel(val, lpc32xx->base + (pwm->hwpwm << 2)); + writel(val, lpc32xx->base); clk_disable_unprepare(lpc32xx->clk); } @@ -141,9 +141,9 @@ static int lpc32xx_pwm_probe(struct platform_device *pdev) lpc32xx->chip.npwm = 1; /* If PWM is disabled, configure the output to the default value */ - val = readl(lpc32xx->base + (lpc32xx->chip.pwms[0].hwpwm << 2)); + val = readl(lpc32xx->base); val &= ~PWM_PIN_LEVEL; - writel(val, lpc32xx->base + (lpc32xx->chip.pwms[0].hwpwm << 2)); + writel(val, lpc32xx->base); ret = devm_pwmchip_add(&pdev->dev, &lpc32xx->chip); if (ret < 0) { |