summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/intel
diff options
context:
space:
mode:
authorAndy Shevchenko <andriy.shevchenko@linux.intel.com>2022-01-19 20:19:15 +0200
committerAndy Shevchenko <andriy.shevchenko@linux.intel.com>2022-01-24 16:30:13 +0200
commite12963c453263d5321a2c610e98cbc731233b685 (patch)
tree6ffb8b042e312179884681672f538b53079280f9 /drivers/pinctrl/intel
parente986f0e602f19ecb7880b04dd1db415ed9bca3f6 (diff)
pinctrl: intel: Fix a glitch when updating IRQ flags on a preconfigured line
The commit af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO") hadn't taken into account an update of the IRQ flags scenario. When updating the IRQ flags on the preconfigured line the ->irq_set_type() is called again. In such case the sequential Rx buffer configuration changes may trigger a falling or rising edge interrupt that may lead, on some platforms, to an undesired event. This may happen because each of intel_gpio_set_gpio_mode() and __intel_gpio_set_direction() updates the pad configuration with a different value of the GPIORXDIS bit. Notable, that the intel_gpio_set_gpio_mode() is called only for the pads that are configured as an input. Due to this fact, integrate the logic of __intel_gpio_set_direction() call into the intel_gpio_set_gpio_mode() so that the Rx buffer won't be disabled and immediately re-enabled. Fixes: af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO") Reported-by: Kane Chen <kane.chen@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Grace Kao <grace.kao@intel.com>
Diffstat (limited to 'drivers/pinctrl/intel')
-rw-r--r--drivers/pinctrl/intel/pinctrl-intel.c10
1 files changed, 2 insertions, 8 deletions
diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
index e9bb98cb9112..826d494f3cc6 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -451,8 +451,8 @@ static void intel_gpio_set_gpio_mode(void __iomem *padcfg0)
value &= ~PADCFG0_PMODE_MASK;
value |= PADCFG0_PMODE_GPIO;
- /* Disable input and output buffers */
- value |= PADCFG0_GPIORXDIS;
+ /* Disable TX buffer and enable RX (this will be input) */
+ value &= ~PADCFG0_GPIORXDIS;
value |= PADCFG0_GPIOTXDIS;
/* Disable SCI/SMI/NMI generation */
@@ -497,9 +497,6 @@ static int intel_gpio_request_enable(struct pinctrl_dev *pctldev,
intel_gpio_set_gpio_mode(padcfg0);
- /* Disable TX buffer and enable RX (this will be input) */
- __intel_gpio_set_direction(padcfg0, true);
-
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
return 0;
@@ -1115,9 +1112,6 @@ static int intel_gpio_irq_type(struct irq_data *d, unsigned int type)
intel_gpio_set_gpio_mode(reg);
- /* Disable TX buffer and enable RX (this will be input) */
- __intel_gpio_set_direction(reg, true);
-
value = readl(reg);
value &= ~(PADCFG0_RXEVCFG_MASK | PADCFG0_RXINV);