Merge commit 'v3.15' into next

1 files changed, 36 insertions, 30 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index 9d325516c42d..fe129c94ae3e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -139,6 +139,13 @@
 #define CSR_ANA_PLL_CFG         (CSR_BASE+0x20c)
 
 /*
+ * CSR HW resources monitor registers
+ */
+#define CSR_MONITOR_CFG_REG		(CSR_BASE+0x214)
+#define CSR_MONITOR_STATUS_REG		(CSR_BASE+0x228)
+#define CSR_MONITOR_XTAL_RESOURCES	(0x00000010)
+
+/*
  * CSR Hardware Revision Workaround Register.  Indicates hardware rev;
  * "step" determines CCK backoff for txpower calculation.  Used for 4965 only.
  * See also CSR_HW_REV register.
@@ -173,6 +180,7 @@
 #define CSR_HW_IF_CONFIG_REG_BIT_NIC_READY	(0x00400000) /* PCI_OWN_SEM */
 #define CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE (0x02000000) /* ME_OWN */
 #define CSR_HW_IF_CONFIG_REG_PREPARE		  (0x08000000) /* WAKE_ME */
+#define CSR_HW_IF_CONFIG_REG_PERSIST_MODE	  (0x40000000) /* PERSISTENCE */
 
 #define CSR_INT_PERIODIC_DIS			(0x00) /* disable periodic int*/
 #define CSR_INT_PERIODIC_ENA			(0xFF) /* 255*32 usec ~ 8 msec*/
@@ -240,6 +248,7 @@
  *         001 -- MAC power-down
  *         010 -- PHY (radio) power-down
  *         011 -- Error
+ *    10:  XTAL ON request
  *   9-6:  SYS_CONFIG
  *         Indicates current system configuration, reflecting pins on chip
  *         as forced high/low by device circuit board.
@@ -271,6 +280,7 @@
 #define CSR_GP_CNTRL_REG_FLAG_INIT_DONE              (0x00000004)
 #define CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ         (0x00000008)
 #define CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP         (0x00000010)
+#define CSR_GP_CNTRL_REG_FLAG_XTAL_ON		     (0x00000400)
 
 #define CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN           (0x00000001)
 
@@ -395,37 +405,33 @@
 #define CSR_DRAM_INT_TBL_ENABLE		(1 << 31)
 #define CSR_DRAM_INIT_TBL_WRAP_CHECK	(1 << 27)
 
-/* SECURE boot registers */
-#define CSR_SECURE_BOOT_CONFIG_ADDR	(0x100)
-enum secure_boot_config_reg {
-	CSR_SECURE_BOOT_CONFIG_INSPECTOR_BURNED_IN_OTP	= 0x00000001,
-	CSR_SECURE_BOOT_CONFIG_INSPECTOR_NOT_REQ	= 0x00000002,
-};
-
-#define CSR_SECURE_BOOT_CPU1_STATUS_ADDR	(0x100)
-#define CSR_SECURE_BOOT_CPU2_STATUS_ADDR	(0x100)
-enum secure_boot_status_reg {
-	CSR_SECURE_BOOT_CPU_STATUS_VERF_STATUS		= 0x00000003,
-	CSR_SECURE_BOOT_CPU_STATUS_VERF_COMPLETED	= 0x00000002,
-	CSR_SECURE_BOOT_CPU_STATUS_VERF_SUCCESS		= 0x00000004,
-	CSR_SECURE_BOOT_CPU_STATUS_VERF_FAIL		= 0x00000008,
-	CSR_SECURE_BOOT_CPU_STATUS_SIGN_VERF_FAIL	= 0x00000010,
-};
-
-#define CSR_UCODE_LOAD_STATUS_ADDR	(0x100)
-enum secure_load_status_reg {
-	CSR_CPU_STATUS_LOADING_STARTED			= 0x00000001,
-	CSR_CPU_STATUS_LOADING_COMPLETED		= 0x00000002,
-	CSR_CPU_STATUS_NUM_OF_LAST_COMPLETED		= 0x000000F8,
-	CSR_CPU_STATUS_NUM_OF_LAST_LOADED_BLOCK		= 0x0000FF00,
-};
-
-#define CSR_SECURE_INSPECTOR_CODE_ADDR	(0x100)
-#define CSR_SECURE_INSPECTOR_DATA_ADDR	(0x100)
-
-#define CSR_SECURE_TIME_OUT	(100)
+/*
+ * SHR target access (Shared block memory space)
+ *
+ * Shared internal registers can be accessed directly from PCI bus through SHR
+ * arbiter without need for the MAC HW to be powered up. This is possible due to
+ * indirect read/write via HEEP_CTRL_WRD_PCIEX_CTRL (0xEC) and
+ * HEEP_CTRL_WRD_PCIEX_DATA (0xF4) registers.
+ *
+ * Use iwl_write32()/iwl_read32() family to access these registers. The MAC HW
+ * need not be powered up so no "grab inc access" is required.
+ */
 
-#define FH_TCSR_0_REG0 (0x1D00)
+/*
+ * Registers for accessing shared registers (e.g. SHR_APMG_GP1,
+ * SHR_APMG_XTAL_CFG). For example, to read from SHR_APMG_GP1 register (0x1DC),
+ * first, write to the control register:
+ * HEEP_CTRL_WRD_PCIEX_CTRL[15:0] = 0x1DC (offset of the SHR_APMG_GP1 register)
+ * HEEP_CTRL_WRD_PCIEX_CTRL[29:28] = 2 (read access)
+ * second, read from the data register HEEP_CTRL_WRD_PCIEX_DATA[31:0].
+ *
+ * To write the register, first, write to the data register
+ * HEEP_CTRL_WRD_PCIEX_DATA[31:0] and then:
+ * HEEP_CTRL_WRD_PCIEX_CTRL[15:0] = 0x1DC (offset of the SHR_APMG_GP1 register)
+ * HEEP_CTRL_WRD_PCIEX_CTRL[29:28] = 3 (write access)
+ */
+#define HEEP_CTRL_WRD_PCIEX_CTRL_REG	(CSR_BASE+0x0ec)
+#define HEEP_CTRL_WRD_PCIEX_DATA_REG	(CSR_BASE+0x0f4)
 
 /*
  * HBUS (Host-side Bus)