diff options
author | Joe Perches <joe@perches.com> | 2010-03-13 12:26:15 -0800 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2010-03-13 12:26:15 -0800 |
commit | c251c7f738cd94eb3a1febda318078c661eccb4d (patch) | |
tree | 289938bee0931996df4c195f5ea459444bfcf5e6 /drivers/net/tulip | |
parent | 2a40018984c5c9647df1c18489449a3a227d9136 (diff) |
drivers/net/tulip/eeprom.c: fix bogus "(null)" in tulip init messages
On Wed, 2010-03-10 at 08:41 -0800, David Miller wrote:
> From: Mikael Pettersson <mikpe@it.uu.se>
> Date: Wed, 10 Mar 2010 16:33:28 +0100
> > Booting 2.6.34-rc1 on a machine with a tulip nic I see
> > a number of kernel messages that include "(null)" where
> > previous kernels included the string "tulip0":
> CC:'ing the guilty party :-) It's one of the following
> commits:
Thanks Mikael.
Anonymity has some good attributes.
Blame avoidance is one of them.
I've broad shoulders. It's me, then Dwight Howard...
There might be another few of these where ->name or ->dev
was used before struct device or net_device was registered.
I'll go back and check.
tulip_core has:
if (tp->flags & HAS_MEDIA_TABLE) {
sprintf(dev->name, DRV_NAME "%d", board_idx); /* hack */
tulip_parse_eeprom(dev);
strcpy(dev->name, "eth%d"); /* un-hack */
}
So I don't feel _too_ bad.
tulip_parse_eeprom is done before register_netdev so the logging
there can not use netdev_<level> or dev_<level>(&dev->dev
Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/tulip')
-rw-r--r-- | drivers/net/tulip/eeprom.c | 54 |
1 files changed, 30 insertions, 24 deletions
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c index 93f4e8309f81..49f05d1431f5 100644 --- a/drivers/net/tulip/eeprom.c +++ b/drivers/net/tulip/eeprom.c @@ -143,6 +143,12 @@ static void __devinit tulip_build_fake_mediatable(struct tulip_private *tp) void __devinit tulip_parse_eeprom(struct net_device *dev) { + /* + dev is not registered at this point, so logging messages can't + use dev_<level> or netdev_<level> but dev->name is good via a + hack in the caller + */ + /* The last media info list parsed, for multiport boards. */ static struct mediatable *last_mediatable; static unsigned char *last_ee_data; @@ -161,15 +167,14 @@ void __devinit tulip_parse_eeprom(struct net_device *dev) if (ee_data[0] == 0xff) { if (last_mediatable) { controller_index++; - dev_info(&dev->dev, - "Controller %d of multiport board\n", - controller_index); + pr_info("%s: Controller %d of multiport board\n", + dev->name, controller_index); tp->mtable = last_mediatable; ee_data = last_ee_data; goto subsequent_board; } else - dev_info(&dev->dev, - "Missing EEPROM, this interface may not work correctly!\n"); + pr_info("%s: Missing EEPROM, this interface may not work correctly!\n", + dev->name); return; } /* Do a fix-up based on the vendor half of the station address prefix. */ @@ -181,15 +186,14 @@ void __devinit tulip_parse_eeprom(struct net_device *dev) i++; /* An Accton EN1207, not an outlaw Maxtech. */ memcpy(ee_data + 26, eeprom_fixups[i].newtable, sizeof(eeprom_fixups[i].newtable)); - dev_info(&dev->dev, - "Old format EEPROM on '%s' board. Using substitute media control info\n", - eeprom_fixups[i].name); + pr_info("%s: Old format EEPROM on '%s' board. Using substitute media control info\n", + dev->name, eeprom_fixups[i].name); break; } } if (eeprom_fixups[i].name == NULL) { /* No fixup found. */ - dev_info(&dev->dev, - "Old style EEPROM with no media selection information\n"); + pr_info("%s: Old style EEPROM with no media selection information\n", + dev->name); return; } } @@ -217,8 +221,8 @@ subsequent_board: /* there is no phy information, don't even try to build mtable */ if (count == 0) { if (tulip_debug > 0) - dev_warn(&dev->dev, - "no phy info, aborting mtable build\n"); + pr_warning("%s: no phy info, aborting mtable build\n", + dev->name); return; } @@ -234,8 +238,10 @@ subsequent_board: mtable->has_nonmii = mtable->has_mii = mtable->has_reset = 0; mtable->csr15dir = mtable->csr15val = 0; - dev_info(&dev->dev, "EEPROM default media type %s\n", - media & 0x0800 ? "Autosense" : medianame[media & MEDIA_MASK]); + pr_info("%s: EEPROM default media type %s\n", + dev->name, + media & 0x0800 ? "Autosense" + : medianame[media & MEDIA_MASK]); for (i = 0; i < count; i++) { struct medialeaf *leaf = &mtable->mleaf[i]; @@ -298,17 +304,17 @@ subsequent_board: } if (tulip_debug > 1 && leaf->media == 11) { unsigned char *bp = leaf->leafdata; - dev_info(&dev->dev, - "MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n", - bp[0], bp[1], bp[2 + bp[1]*2], - bp[5 + bp[2 + bp[1]*2]*2], - bp[4 + bp[2 + bp[1]*2]*2]); + pr_info("%s: MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n", + dev->name, + bp[0], bp[1], bp[2 + bp[1]*2], + bp[5 + bp[2 + bp[1]*2]*2], + bp[4 + bp[2 + bp[1]*2]*2]); } - dev_info(&dev->dev, - "Index #%d - Media %s (#%d) described by a %s (%d) block\n", - i, medianame[leaf->media & 15], leaf->media, - leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>", - leaf->type); + pr_info("%s: Index #%d - Media %s (#%d) described by a %s (%d) block\n", + dev->name, + i, medianame[leaf->media & 15], leaf->media, + leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>", + leaf->type); } if (new_advertise) tp->sym_advertise = new_advertise; |