diff options
author | Boris Brezillon <boris.brezillon@bootlin.com> | 2018-09-07 00:38:49 +0200 |
---|---|---|
committer | Miquel Raynal <miquel.raynal@bootlin.com> | 2018-10-03 11:12:25 +0200 |
commit | 3d4af7c195850cfccaddc2cf03b010b95236b695 (patch) | |
tree | 3eb0b6597f871f441ea07a0ff34abbb062887d68 /drivers/mtd | |
parent | 348d56a8c6067f3b2f1799d6f050f3be4bf5904b (diff) |
mtd: rawnand: Move legacy code to nand_legacy.c
Allows us to move a few hundred lines of deprecated code out of the
core file which is quite big.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Diffstat (limited to 'drivers/mtd')
-rw-r--r-- | drivers/mtd/nand/raw/Makefile | 2 | ||||
-rw-r--r-- | drivers/mtd/nand/raw/internals.h | 6 | ||||
-rw-r--r-- | drivers/mtd/nand/raw/nand_base.c | 618 | ||||
-rw-r--r-- | drivers/mtd/nand/raw/nand_legacy.c | 642 |
4 files changed, 660 insertions, 608 deletions
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile index a6ef0673e29e..78f67de2e60b 100644 --- a/drivers/mtd/nand/raw/Makefile +++ b/drivers/mtd/nand/raw/Makefile @@ -57,7 +57,7 @@ obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o obj-$(CONFIG_MTD_NAND_MTK) += mtk_ecc.o mtk_nand.o obj-$(CONFIG_MTD_NAND_TEGRA) += tegra_nand.o -nand-objs := nand_base.o nand_bbt.o nand_timings.o nand_ids.o +nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o nand-objs += nand_amd.o nand-objs += nand_hynix.o nand-objs += nand_macronix.o diff --git a/drivers/mtd/nand/raw/internals.h b/drivers/mtd/nand/raw/internals.h index 1d2edddb6127..289a4b8f7974 100644 --- a/drivers/mtd/nand/raw/internals.h +++ b/drivers/mtd/nand/raw/internals.h @@ -89,10 +89,16 @@ int nand_write_page_raw_notsupp(struct nand_chip *chip, const u8 *buf, int oob_required, int page); int nand_exit_status_op(struct nand_chip *chip); void nand_decode_ext_id(struct nand_chip *chip); +void panic_nand_wait(struct nand_chip *chip, unsigned long timeo); /* BBT functions */ int nand_markbad_bbt(struct nand_chip *chip, loff_t offs); int nand_isreserved_bbt(struct nand_chip *chip, loff_t offs); int nand_isbad_bbt(struct nand_chip *chip, loff_t offs, int allowbbt); +/* Legacy */ +void nand_legacy_set_defaults(struct nand_chip *chip); +void nand_legacy_adjust_cmdfunc(struct nand_chip *chip); +int nand_legacy_check_hooks(struct nand_chip *chip); + #endif /* __LINUX_RAWNAND_INTERNALS */ diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index d48c588d1abe..4ef00cefd5da 100644 --- a/drivers/mtd/nand/raw/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c @@ -36,7 +36,6 @@ #include <linux/sched.h> #include <linux/slab.h> #include <linux/mm.h> -#include <linux/nmi.h> #include <linux/types.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand_ecc.h> @@ -254,150 +253,6 @@ static void nand_release_device(struct mtd_info *mtd) } /** - * nand_read_byte - [DEFAULT] read one byte from the chip - * @chip: NAND chip object - * - * Default read function for 8bit buswidth - */ -static uint8_t nand_read_byte(struct nand_chip *chip) -{ - return readb(chip->legacy.IO_ADDR_R); -} - -/** - * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip - * @chip: NAND chip object - * - * Default read function for 16bit buswidth with endianness conversion. - * - */ -static uint8_t nand_read_byte16(struct nand_chip *chip) -{ - return (uint8_t) cpu_to_le16(readw(chip->legacy.IO_ADDR_R)); -} - -/** - * nand_select_chip - [DEFAULT] control CE line - * @chip: NAND chip object - * @chipnr: chipnumber to select, -1 for deselect - * - * Default select function for 1 chip devices. - */ -static void nand_select_chip(struct nand_chip *chip, int chipnr) -{ - switch (chipnr) { - case -1: - chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE, - 0 | NAND_CTRL_CHANGE); - break; - case 0: - break; - - default: - BUG(); - } -} - -/** - * nand_write_byte - [DEFAULT] write single byte to chip - * @chip: NAND chip object - * @byte: value to write - * - * Default function to write a byte to I/O[7:0] - */ -static void nand_write_byte(struct nand_chip *chip, uint8_t byte) -{ - chip->legacy.write_buf(chip, &byte, 1); -} - -/** - * nand_write_byte16 - [DEFAULT] write single byte to a chip with width 16 - * @chip: NAND chip object - * @byte: value to write - * - * Default function to write a byte to I/O[7:0] on a 16-bit wide chip. - */ -static void nand_write_byte16(struct nand_chip *chip, uint8_t byte) -{ - uint16_t word = byte; - - /* - * It's not entirely clear what should happen to I/O[15:8] when writing - * a byte. The ONFi spec (Revision 3.1; 2012-09-19, Section 2.16) reads: - * - * When the host supports a 16-bit bus width, only data is - * transferred at the 16-bit width. All address and command line - * transfers shall use only the lower 8-bits of the data bus. During - * command transfers, the host may place any value on the upper - * 8-bits of the data bus. During address transfers, the host shall - * set the upper 8-bits of the data bus to 00h. - * - * One user of the write_byte callback is nand_set_features. The - * four parameters are specified to be written to I/O[7:0], but this is - * neither an address nor a command transfer. Let's assume a 0 on the - * upper I/O lines is OK. - */ - chip->legacy.write_buf(chip, (uint8_t *)&word, 2); -} - -/** - * nand_write_buf - [DEFAULT] write buffer to chip - * @chip: NAND chip object - * @buf: data buffer - * @len: number of bytes to write - * - * Default write function for 8bit buswidth. - */ -static void nand_write_buf(struct nand_chip *chip, const uint8_t *buf, int len) -{ - iowrite8_rep(chip->legacy.IO_ADDR_W, buf, len); -} - -/** - * nand_read_buf - [DEFAULT] read chip data into buffer - * @chip: NAND chip object - * @buf: buffer to store date - * @len: number of bytes to read - * - * Default read function for 8bit buswidth. - */ -static void nand_read_buf(struct nand_chip *chip, uint8_t *buf, int len) -{ - ioread8_rep(chip->legacy.IO_ADDR_R, buf, len); -} - -/** - * nand_write_buf16 - [DEFAULT] write buffer to chip - * @chip: NAND chip object - * @buf: data buffer - * @len: number of bytes to write - * - * Default write function for 16bit buswidth. - */ -static void nand_write_buf16(struct nand_chip *chip, const uint8_t *buf, - int len) -{ - u16 *p = (u16 *) buf; - - iowrite16_rep(chip->legacy.IO_ADDR_W, p, len >> 1); -} - -/** - * nand_read_buf16 - [DEFAULT] read chip data into buffer - * @chip: NAND chip object - * @buf: buffer to store date - * @len: number of bytes to read - * - * Default read function for 16bit buswidth. - */ -static void nand_read_buf16(struct nand_chip *chip, uint8_t *buf, int len) -{ - u16 *p = (u16 *) buf; - - ioread16_rep(chip->legacy.IO_ADDR_R, p, len >> 1); -} - -/** * nand_block_bad - [DEFAULT] Read bad block marker from the chip * @chip: NAND chip object * @ofs: offset from device start @@ -612,81 +467,6 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int allowbbt) } /** - * panic_nand_wait_ready - [GENERIC] Wait for the ready pin after commands. - * @mtd: MTD device structure - * @timeo: Timeout - * - * Helper function for nand_wait_ready used when needing to wait in interrupt - * context. - */ -static void panic_nand_wait_ready(struct mtd_info *mtd, unsigned long timeo) -{ - struct nand_chip *chip = mtd_to_nand(mtd); - int i; - - /* Wait for the device to get ready */ - for (i = 0; i < timeo; i++) { - if (chip->legacy.dev_ready(chip)) - break; - touch_softlockup_watchdog(); - mdelay(1); - } -} - -/** - * nand_wait_ready - [GENERIC] Wait for the ready pin after commands. - * @chip: NAND chip object - * - * Wait for the ready pin after a command, and warn if a timeout occurs. - */ -void nand_wait_ready(struct nand_chip *chip) -{ - struct mtd_info *mtd = nand_to_mtd(chip); - unsigned long timeo = 400; - - if (in_interrupt() || oops_in_progress) - return panic_nand_wait_ready(mtd, timeo); - - /* Wait until command is processed or timeout occurs */ - timeo = jiffies + msecs_to_jiffies(timeo); - do { - if (chip->legacy.dev_ready(chip)) - return; - cond_resched(); - } while (time_before(jiffies, timeo)); - - if (!chip->legacy.dev_ready(chip)) - pr_warn_ratelimited("timeout while waiting for chip to become ready\n"); -} -EXPORT_SYMBOL_GPL(nand_wait_ready); - -/** - * nand_wait_status_ready - [GENERIC] Wait for the ready status after commands. - * @mtd: MTD device structure - * @timeo: Timeout in ms - * - * Wait for status ready (i.e. command done) or timeout. - */ -static void nand_wait_status_ready(struct mtd_info *mtd, unsigned long timeo) -{ - register struct nand_chip *chip = mtd_to_nand(mtd); - int ret; - - timeo = jiffies + msecs_to_jiffies(timeo); - do { - u8 status; - - ret = nand_read_data_op(chip, &status, sizeof(status), true); - if (ret) - return; - - if (status & NAND_STATUS_READY) - break; - touch_softlockup_watchdog(); - } while (time_before(jiffies, timeo)); -}; - -/** * nand_soft_waitrdy - Poll STATUS reg until RDY bit is set to 1 * @chip: NAND chip structure * @timeout_ms: Timeout in ms @@ -752,275 +532,6 @@ int nand_soft_waitrdy(struct nand_chip *chip, unsigned long timeout_ms) EXPORT_SYMBOL_GPL(nand_soft_waitrdy); /** - * nand_command - [DEFAULT] Send command to NAND device - * @chip: NAND chip object - * @command: the command to be sent - * @column: the column address for this command, -1 if none - * @page_addr: the page address for this command, -1 if none - * - * Send command to NAND device. This function is used for small page devices - * (512 Bytes per page). - */ -static void nand_command(struct nand_chip *chip, unsigned int command, - int column, int page_addr) -{ - struct mtd_info *mtd = nand_to_mtd(chip); - int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE; - - /* Write out the command to the device */ - if (command == NAND_CMD_SEQIN) { - int readcmd; - - if (column >= mtd->writesize) { - /* OOB area */ - column -= mtd->writesize; - readcmd = NAND_CMD_READOOB; - } else if (column < 256) { - /* First 256 bytes --> READ0 */ - readcmd = NAND_CMD_READ0; - } else { - column -= 256; - readcmd = NAND_CMD_READ1; - } - chip->legacy.cmd_ctrl(chip, readcmd, ctrl); - ctrl &= ~NAND_CTRL_CHANGE; - } - if (command != NAND_CMD_NONE) - chip->legacy.cmd_ctrl(chip, command, ctrl); - - /* Address cycle, when necessary */ - ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE; - /* Serially input address */ - if (column != -1) { - /* Adjust columns for 16 bit buswidth */ - if (chip->options & NAND_BUSWIDTH_16 && - !nand_opcode_8bits(command)) - column >>= 1; - chip->legacy.cmd_ctrl(chip, column, ctrl); - ctrl &= ~NAND_CTRL_CHANGE; - } - if (page_addr != -1) { - chip->legacy.cmd_ctrl(chip, page_addr, ctrl); - ctrl &= ~NAND_CTRL_CHANGE; - chip->legacy.cmd_ctrl(chip, page_addr >> 8, ctrl); - if (chip->options & NAND_ROW_ADDR_3) - chip->legacy.cmd_ctrl(chip, page_addr >> 16, ctrl); - } - chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE, - NAND_NCE | NAND_CTRL_CHANGE); - - /* - * Program and erase have their own busy handlers status and sequential - * in needs no delay - */ - switch (command) { - - case NAND_CMD_NONE: - case NAND_CMD_PAGEPROG: - case NAND_CMD_ERASE1: - case NAND_CMD_ERASE2: - case NAND_CMD_SEQIN: - case NAND_CMD_STATUS: - case NAND_CMD_READID: - case NAND_CMD_SET_FEATURES: - return; - - case NAND_CMD_RESET: - if (chip->legacy.dev_ready) - break; - udelay(chip->legacy.chip_delay); - chip->legacy.cmd_ctrl(chip, NAND_CMD_STATUS, - NAND_CTRL_CLE | NAND_CTRL_CHANGE); - chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE, - NAND_NCE | NAND_CTRL_CHANGE); - /* EZ-NAND can take upto 250ms as per ONFi v4.0 */ - nand_wait_status_ready(mtd, 250); - return; - - /* This applies to read commands */ - case NAND_CMD_READ0: - /* - * READ0 is sometimes used to exit GET STATUS mode. When this - * is the case no address cycles are requested, and we can use - * this information to detect that we should not wait for the - * device to be ready. - */ - if (column == -1 && page_addr == -1) - return; - - default: - /* - * If we don't have access to the busy pin, we apply the given - * command delay - */ - if (!chip->legacy.dev_ready) { - udelay(chip->legacy.chip_delay); - return; - } - } - /* - * Apply this short delay always to ensure that we do wait tWB in - * any case on any machine. - */ - ndelay(100); - - nand_wait_ready(chip); -} - -static void nand_ccs_delay(struct nand_chip *chip) -{ - /* - * The controller already takes care of waiting for tCCS when the RNDIN - * or RNDOUT command is sent, return directly. - */ - if (!(chip->options & NAND_WAIT_TCCS)) - return; - - /* - * Wait tCCS_min if it is correctly defined, otherwise wait 500ns - * (which should be safe for all NANDs). - */ - if (chip->setup_data_interface) - ndelay(chip->data_interface.timings.sdr.tCCS_min / 1000); - else - ndelay(500); -} - -/** - * nand_command_lp - [DEFAULT] Send command to NAND large page device - * @chip: NAND chip object - * @command: the command to be sent - * @column: the column address for this command, -1 if none - * @page_addr: the page address for this command, -1 if none - * - * Send command to NAND device. This is the version for the new large page - * devices. We don't have the separate regions as we have in the small page - * devices. We must emulate NAND_CMD_READOOB to keep the code compatible. - */ -static void nand_command_lp(struct nand_chip *chip, unsigned int command, - int column, int page_addr) -{ - struct mtd_info *mtd = nand_to_mtd(chip); - - /* Emulate NAND_CMD_READOOB */ - if (command == NAND_CMD_READOOB) { - column += mtd->writesize; - command = NAND_CMD_READ0; - } - - /* Command latch cycle */ - if (command != NAND_CMD_NONE) - chip->legacy.cmd_ctrl(chip, command, - NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); - - if (column != -1 || page_addr != -1) { - int ctrl = NAND_CTRL_CHANGE | NAND_NCE | NAND_ALE; - - /* Serially input address */ - if (column != -1) { - /* Adjust columns for 16 bit buswidth */ - if (chip->options & NAND_BUSWIDTH_16 && - !nand_opcode_8bits(command)) - column >>= 1; - chip->legacy.cmd_ctrl(chip, column, ctrl); - ctrl &= ~NAND_CTRL_CHANGE; - - /* Only output a single addr cycle for 8bits opcodes. */ - if (!nand_opcode_8bits(command)) - chip->legacy.cmd_ctrl(chip, column >> 8, ctrl); - } - if (page_addr != -1) { - chip->legacy.cmd_ctrl(chip, page_addr, ctrl); - chip->legacy.cmd_ctrl(chip, page_addr >> 8, - NAND_NCE | NAND_ALE); - if (chip->options & NAND_ROW_ADDR_3) - chip->legacy.cmd_ctrl(chip, page_addr >> 16, - NAND_NCE | NAND_ALE); - } - } - chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE, - NAND_NCE | NAND_CTRL_CHANGE); - - /* - * Program and erase have their own busy handlers status, sequential - * in and status need no delay. - */ - switch (command) { - - case NAND_CMD_NONE: - case NAND_CMD_CACHEDPROG: - case NAND_CMD_PAGEPROG: - case NAND_CMD_ERASE1: - case NAND_CMD_ERASE2: - case NAND_CMD_SEQIN: - case NAND_CMD_STATUS: - case NAND_CMD_READID: - case NAND_CMD_SET_FEATURES: - return; - - case NAND_CMD_RNDIN: - nand_ccs_delay(chip); - return; - - case NAND_CMD_RESET: - if (chip->legacy.dev_ready) - break; - udelay(chip->legacy.chip_delay); - chip->legacy.cmd_ctrl(chip, NAND_CMD_STATUS, - NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); - chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE, - NAND_NCE | NAND_CTRL_CHANGE); - /* EZ-NAND can take upto 250ms as per ONFi v4.0 */ - nand_wait_status_ready(mtd, 250); - return; - - case NAND_CMD_RNDOUT: - /* No ready / busy check necessary */ - chip->legacy.cmd_ctrl(chip, NAND_CMD_RNDOUTSTART, - NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); - chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE, - NAND_NCE | NAND_CTRL_CHANGE); - - nand_ccs_delay(chip); - return; - - case NAND_CMD_READ0: - /* - * READ0 is sometimes used to exit GET STATUS mode. When this - * is the case no address cycles are requested, and we can use - * this information to detect that READSTART should not be - * issued. - */ - if (column == -1 && page_addr == -1) - return; - - chip->legacy.cmd_ctrl(chip, NAND_CMD_READSTART, - NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); - chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE, - NAND_NCE | NAND_CTRL_CHANGE); - - /* This applies to read commands */ - default: - /* - * If we don't have access to the busy pin, we apply the given - * command delay. - */ - if (!chip->legacy.dev_ready) { - udelay(chip->legacy.chip_delay); - return; - } - } - - /* - * Apply this short delay always to ensure that we do wait tWB in - * any case on any machine. - */ - ndelay(100); - - nand_wait_ready(chip); -} - -/** * panic_nand_get_device - [GENERIC] Get chip for selected access * @chip: the nand chip descriptor * @mtd: MTD device structure @@ -1087,7 +598,7 @@ retry: * we are in interrupt context. May happen when in panic and trying to write * an oops through mtdoops. */ -static void panic_nand_wait(struct nand_chip *chip, unsigned long timeo) +void panic_nand_wait(struct nand_chip *chip, unsigned long timeo) { int i; for (i = 0; i < timeo; i++) { @@ -1110,60 +621,6 @@ static void panic_nand_wait(struct nand_chip *chip, unsigned long timeo) } } -/** - * nand_wait - [DEFAULT] wait until the command is done - * @mtd: MTD device structure - * @chip: NAND chip structure - * - * Wait for command done. This applies to erase and program only. - */ -static int nand_wait(struct nand_chip *chip) -{ - - unsigned long timeo = 400; - u8 status; - int ret; - - /* - * Apply this short delay always to ensure that we do wait tWB in any - * case on any machine. - */ - ndelay(100); - - ret = nand_status_op(chip, NULL); - if (ret) - return ret; - - if (in_interrupt() || oops_in_progress) - panic_nand_wait(chip, timeo); - else { - timeo = jiffies + msecs_to_jiffies(timeo); - do { - if (chip->legacy.dev_ready) { - if (chip->legacy.dev_ready(chip)) - break; - } else { - ret = nand_read_data_op(chip, &status, - sizeof(status), true); - if (ret) - return ret; - - if (status & NAND_STATUS_READY) - break; - } - cond_resched(); - } while (time_before(jiffies, timeo)); - } - - ret = nand_read_data_op(chip, &status, sizeof(status), true); - if (ret) - return ret; - - /* This can happen if in case of timeout or buggy dev_ready */ - WARN_ON(!(status & NAND_STATUS_READY)); - return status; -} - static bool nand_supports_get_features(struct nand_chip *chip, int addr) { return (chip->parameters.supports_set_get_features && @@ -4865,22 +4322,6 @@ static int nand_max_bad_blocks(struct mtd_info *mtd, loff_t ofs, size_t len) } /** - * nand_get_set_features_notsupp - set/get features stub returning -ENOTSUPP - * @chip: nand chip info structure - * @addr: feature address. - * @subfeature_param: the subfeature parameters, a four bytes array. - * - * Should be used by NAND controller drivers that do not support the SET/GET - * FEATURES operations. - */ -int nand_get_set_features_notsupp(struct nand_chip *chip, int addr, - u8 *subfeature_param) -{ - return -ENOTSUPP; -} -EXPORT_SYMBOL(nand_get_set_features_notsupp); - -/** * nand_suspend - [MTD Interface] Suspend the NAND flash * @mtd: MTD device structure */ @@ -4917,32 +4358,7 @@ static void nand_shutdown(struct mtd_info *mtd) /* Set default functions */ static void nand_set_defaults(struct nand_chip *chip) { - unsigned int busw = chip->options & NAND_BUSWIDTH_16; - - /* check for proper chip_delay setup, set 20us if not */ - if (!chip->legacy.chip_delay) - chip->legacy.chip_delay = 20; - - /* check, if a user supplied command function given */ - if (!chip->legacy.cmdfunc && !chip->exec_op) - chip->legacy.cmdfunc = nand_command; - - /* check, if a user supplied wait function given */ - if (chip->legacy.waitfunc == NULL) - chip->legacy.waitfunc = nand_wait; - - if (!chip->select_chip) - chip->select_chip = nand_select_chip; - - /* If called twice, pointers that depend on busw may need to be reset */ - if (!chip->legacy.read_byte || chip->legacy.read_byte == nand_read_byte) - chip->legacy.read_byte = busw ? nand_read_byte16 : nand_read_byte; - if (!chip->legacy.write_buf || chip->legacy.write_buf == nand_write_buf) - chip->legacy.write_buf = busw ? nand_write_buf16 : nand_write_buf; - if (!chip->legacy.write_byte || chip->legacy.write_byte == nand_write_byte) - chip->legacy.write_byte = busw ? nand_write_byte16 : nand_write_byte; - if (!chip->legacy.read_buf || chip->legacy.read_buf == nand_read_buf) - chip->legacy.read_buf = busw ? nand_read_buf16 : nand_read_buf; + nand_legacy_set_defaults(chip); if (!chip->controller) { chip->controller = &chip->dummy_controller; @@ -5212,9 +4628,7 @@ static int nand_flash_detect_onfi(struct nand_chip *chip) * chip->legacy.cmdfunc now. We do not replace user supplied * command function. */ - if (mtd->writesize > 512 && - chip->legacy.cmdfunc == nand_command) - chip->legacy.cmdfunc = nand_command_lp; + nand_legacy_adjust_cmdfunc(chip); /* The Extended Parameter Page is supported since ONFI 2.1. */ if (nand_flash_detect_ext_param_page(chip, p)) @@ -5737,9 +5151,7 @@ ident_done: chip->badblockbits = 8; - /* Do not replace user supplied command function! */ - if (mtd->writesize > 512 && chip->legacy.cmdfunc == nand_command) - chip->legacy.cmdfunc = nand_command_lp; + nand_legacy_adjust_cmdfunc(chip); pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n", maf_id, dev_id); @@ -5935,23 +5347,15 @@ static int nand_scan_ident(struct nand_chip *chip, unsigned int maxchips, if (!mtd->name && mtd->dev.parent) mtd->name = dev_name(mtd->dev.parent); - /* - * ->legacy.cmdfunc() is legacy and will only be used if ->exec_op() is - * not populated. - */ - if (!chip->exec_op) { - /* - * Default functions assigned for ->legacy.cmdfunc() and - * ->select_chip() both expect ->legacy.cmd_ctrl() to be - * populated. - */ - if ((!chip->legacy.cmdfunc || !chip->select_chip) && - !chip->legacy.cmd_ctrl) { - pr_err("->legacy.cmd_ctrl() should be provided\n"); - return -EINVAL; - } + if (chip->exec_op && !chip->select_chip) { + pr_err("->select_chip() is mandatory when implementing ->exec_op()\n"); + return -EINVAL; } + ret = nand_legacy_check_hooks(chip); + if (ret) + return ret; + /* Set the default functions */ nand_set_defaults(chip); diff --git a/drivers/mtd/nand/raw/nand_legacy.c b/drivers/mtd/nand/raw/nand_legacy.c new file mode 100644 index 000000000000..c5ddc86cd98c --- /dev/null +++ b/drivers/mtd/nand/raw/nand_legacy.c @@ -0,0 +1,642 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) + * 2002-2006 Thomas Gleixner (tglx@linutronix.de) + * + * Credits: + * David Woodhouse for adding multichip support + * + * Aleph One Ltd. and Toby Churchill Ltd. for supporting the + * rework for 2K page size chips + * + * This file contains all legacy helpers/code that should be removed + * at some point. + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/nmi.h> + +#include "internals.h" + +/** + * nand_read_byte - [DEFAULT] read one byte from the chip + * @chip: NAND chip object + * + * Default read function for 8bit buswidth + */ +static uint8_t nand_read_byte(struct nand_chip *chip) +{ + return readb(chip->legacy.IO_ADDR_R); +} + +/** + * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip + * @chip: NAND chip object + * + * Default read function for 16bit buswidth with endianness conversion. + * + */ +static uint8_t nand_read_byte16(struct nand_chip *chip) +{ + return (uint8_t) cpu_to_le16(readw(chip->legacy.IO_ADDR_R)); +} + +/** + * nand_select_chip - [DEFAULT] control CE line + * @chip: NAND chip object + * @chipnr: chipnumber to select, -1 for deselect + * + * Default select function for 1 chip devices. + */ +static void nand_select_chip(struct nand_chip *chip, int chipnr) +{ + switch (chipnr) { + case -1: + chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE, + 0 | NAND_CTRL_CHANGE); + break; + case 0: + break; + + default: + BUG(); + } +} + +/** + * nand_write_byte - [DEFAULT] write single byte to chip + * @chip: NAND chip object + * @byte: value to write + * + * Default function to write a byte to I/O[7:0] + */ +static void nand_write_byte(struct nand_chip *chip, uint8_t byte) +{ + chip->legacy.write_buf(chip, &byte, 1); +} + +/** + * nand_write_byte16 - [DEFAULT] write single byte to a chip with width 16 + * @chip: NAND chip object + * @byte: value to write + * + * Default function to write a byte to I/O[7:0] on a 16-bit wide chip. + */ +static void nand_write_byte16(struct nand_chip *chip, uint8_t byte) +{ + uint16_t word = byte; + + /* + * It's not entirely clear what should happen to I/O[15:8] when writing + * a byte. The ONFi spec (Revision 3.1; 2012-09-19, Section 2.16) reads: + * + * When the host supports a 16-bit bus width, only data is + * transferred at the 16-bit width. All address and command line + * transfers shall use only the lower 8-bits of the data bus. During + * command transfers, the host may place any value on the upper + * 8-bits of the data bus. During address transfers, the host shall + * set the upper 8-bits of the data bus to 00h. + * + * One user of the write_byte callback is nand_set_features. The + * four parameters are specified to be written to I/O[7:0], but this is + * neither an address nor a command transfer. Let's assume a 0 on the + * upper I/O lines is OK. + */ + chip->legacy.write_buf(chip, (uint8_t *)&word, 2); +} + +/** + * nand_write_buf - [DEFAULT] write buffer to chip + * @chip: NAND chip object + * @buf: data buffer + * @len: number of bytes to write + * + * Default write function for 8bit buswidth. + */ +static void nand_write_buf(struct nand_chip *chip, const uint8_t *buf, int len) +{ + iowrite8_rep(chip->legacy.IO_ADDR_W, buf, len); +} + +/** + * nand_read_buf - [DEFAULT] read chip data into buffer + * @chip: NAND chip object + * @buf: buffer to store date + * @len: number of bytes to read + * + * Default read function for 8bit buswidth. + */ +static void nand_read_buf(struct nand_chip *chip, uint8_t *buf, int len) +{ + ioread8_rep(chip->legacy.IO_ADDR_R, buf, len); +} + +/** + * nand_write_buf16 - [DEFAULT] write buffer to chip + * @chip: NAND chip object + * @buf: data buffer + * @len: number of bytes to write + * + * Default write function for 16bit buswidth. + */ +static void nand_write_buf16(struct nand_chip *chip, const uint8_t *buf, + int len) +{ + u16 *p = (u16 *) buf; + + iowrite16_rep(chip->legacy.IO_ADDR_W, p, len >> 1); +} + +/** + * nand_read_buf16 - [DEFAULT] read chip data into buffer + * @chip: NAND chip object + * @buf: buffer to store date + * @len: number of bytes to read + * + * Default read function for 16bit buswidth. + */ +static void nand_read_buf16(struct nand_chip *chip, uint8_t *buf, int len) +{ + u16 *p = (u16 *) buf; + + ioread16_rep(chip->legacy.IO_ADDR_R, p, len >> 1); +} + +/** + * panic_nand_wait_ready - [GENERIC] Wait for the ready pin after commands. + * @mtd: MTD device structure + * @timeo: Timeout + * + * Helper function for nand_wait_ready used when needing to wait in interrupt + * context. + */ +static void panic_nand_wait_ready(struct mtd_info *mtd, unsigned long timeo) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + int i; + + /* Wait for the device to get ready */ + for (i = 0; i < timeo; i++) { + if (chip->legacy.dev_ready(chip)) + break; + touch_softlockup_watchdog(); + mdelay(1); + } +} + +/** + * nand_wait_ready - [GENERIC] Wait for the ready pin after commands. + * @chip: NAND chip object + * + * Wait for the ready pin after a command, and warn if a timeout occurs. + */ +void nand_wait_ready(struct nand_chip *chip) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + unsigned long timeo = 400; + + if (in_interrupt() || oops_in_progress) + return panic_nand_wait_ready(mtd, timeo); + + /* Wait until command is processed or timeout occurs */ + timeo = jiffies + msecs_to_jiffies(timeo); + do { + if (chip->legacy.dev_ready(chip)) + return; + cond_resched(); + } while (time_before(jiffies, timeo)); + + if (!chip->legacy.dev_ready(chip)) + pr_warn_ratelimited("timeout while waiting for chip to become ready\n"); +} +EXPORT_SYMBOL_GPL(nand_wait_ready); + +/** + * nand_wait_status_ready - [GENERIC] Wait for the ready status after commands. + * @mtd: MTD device structure + * @timeo: Timeout in ms + * + * Wait for status ready (i.e. command done) or timeout. + */ +static void nand_wait_status_ready(struct mtd_info *mtd, unsigned long timeo) +{ + register struct nand_chip *chip = mtd_to_nand(mtd); + int ret; + + timeo = jiffies + msecs_to_jiffies(timeo); + do { + u8 status; + + ret = nand_read_data_op(chip, &status, sizeof(status), true); + if (ret) + return; + + if (status & NAND_STATUS_READY) + break; + touch_softlockup_watchdog(); + } while (time_before(jiffies, timeo)); +}; + +/** + * nand_command - [DEFAULT] Send command to NAND device + * @chip: NAND chip object + * @command: the command to be sent + * @column: the column address for this command, -1 if none + * @page_addr: the page address for this command, -1 if none + * + * Send command to NAND device. This function is used for small page devices + * (512 Bytes per page). + */ +static void nand_command(struct nand_chip *chip, unsigned int command, + int column, int page_addr) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE; + + /* Write out the command to the device */ + if (command == NAND_CMD_SEQIN) { + int readcmd; + + if (column >= mtd->writesize) { + /* OOB area */ + column -= mtd->writesize; + readcmd = NAND_CMD_READOOB; + } else if (column < 256) { + /* First 256 bytes --> READ0 */ + readcmd = NAND_CMD_READ0; + } else { + column -= 256; + readcmd = NAND_CMD_READ1; + } + chip->legacy.cmd_ctrl(chip, readcmd, ctrl); + ctrl &= ~NAND_CTRL_CHANGE; + } + if (command != NAND_CMD_NONE) + chip->legacy.cmd_ctrl(chip, command, ctrl); + + /* Address cycle, when necessary */ + ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE; + /* Serially input address */ + if (column != -1) { + /* Adjust columns for 16 bit buswidth */ + if (chip->options & NAND_BUSWIDTH_16 && + !nand_opcode_8bits(command)) + column >>= 1; + chip->legacy.cmd_ctrl(chip, column, ctrl); + ctrl &= ~NAND_CTRL_CHANGE; + } + if (page_addr != -1) { + chip->legacy.cmd_ctrl(chip, page_addr, ctrl); + ctrl &= ~NAND_CTRL_CHANGE; + chip->legacy.cmd_ctrl(chip, page_addr >> 8, ctrl); + if (chip->options & NAND_ROW_ADDR_3) + chip->legacy.cmd_ctrl(chip, page_addr >> 16, ctrl); + } + chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE, + NAND_NCE | NAND_CTRL_CHANGE); + + /* + * Program and erase have their own busy handlers status and sequential + * in needs no delay + */ + switch (command) { + + case NAND_CMD_NONE: + case NAND_CMD_PAGEPROG: + case NAND_CMD_ERASE1: + case NAND_CMD_ERASE2: + case NAND_CMD_SEQIN: + case NAND_CMD_STATUS: + case NAND_CMD_READID: + case NAND_CMD_SET_FEATURES: + return; + + case NAND_CMD_RESET: + if (chip->legacy.dev_ready) + break; + udelay(chip->legacy.chip_delay); + chip->legacy.cmd_ctrl(chip, NAND_CMD_STATUS, + NAND_CTRL_CLE | NAND_CTRL_CHANGE); + chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE, + NAND_NCE | NAND_CTRL_CHANGE); + /* EZ-NAND can take upto 250ms as per ONFi v4.0 */ + nand_wait_status_ready(mtd, 250); + return; + + /* This applies to read commands */ + case NAND_CMD_READ0: + /* + * READ0 is sometimes used to exit GET STATUS mode. When this + * is the case no address cycles are requested, and we can use + * this information to detect that we should not wait for the + * device to be ready. + */ + if (column == -1 && page_addr == -1) + return; + + default: + /* + * If we don't have access to the busy pin, we apply the given + * command delay + */ + if (!chip->legacy.dev_ready) { + udelay(chip->legacy.chip_delay); + return; + } + } + /* + * Apply this short delay always to ensure that we do wait tWB in + * any case on any machine. + */ + ndelay(100); + + nand_wait_ready(chip); +} + +static void nand_ccs_delay(struct nand_chip *chip) +{ + /* + * The controller already takes care of waiting for tCCS when the RNDIN + * or RNDOUT command is sent, return directly. + */ + if (!(chip->options & NAND_WAIT_TCCS)) + return; + + /* + * Wait tCCS_min if it is correctly defined, otherwise wait 500ns + * (which should be safe for all NANDs). + */ + if (chip->setup_data_interface) + ndelay(chip->data_interface.timings.sdr.tCCS_min / 1000); + else + ndelay(500); +} + +/** + * nand_command_lp - [DEFAULT] Send command to NAND large page device + * @chip: NAND chip object + * @command: the command to be sent + * @column: the column address for this command, -1 if none + * @page_addr: the page address for this command, -1 if none + * + * Send command to NAND device. This is the version for the new large page + * devices. We don't have the separate regions as we have in the small page + * devices. We must emulate NAND_CMD_READOOB to keep the code compatible. + */ +static void nand_command_lp(struct nand_chip *chip, unsigned int command, + int column, int page_addr) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + + /* Emulate NAND_CMD_READOOB */ + if (command == NAND_CMD_READOOB) { + column += mtd->writesize; + command = NAND_CMD_READ0; + } + + /* Command latch cycle */ + if (command != NAND_CMD_NONE) + chip->legacy.cmd_ctrl(chip, command, + NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); + + if (column != -1 || page_addr != -1) { + int ctrl = NAND_CTRL_CHANGE | NAND_NCE | NAND_ALE; + + /* Serially input address */ + if (column != -1) { + /* Adjust columns for 16 bit buswidth */ + if (chip->options & NAND_BUSWIDTH_16 && + !nand_opcode_8bits(command)) + column >>= 1; + chip->legacy.cmd_ctrl(chip, column, ctrl); + ctrl &= ~NAND_CTRL_CHANGE; + + /* Only output a single addr cycle for 8bits opcodes. */ + if (!nand_opcode_8bits(command)) + chip->legacy.cmd_ctrl(chip, column >> 8, ctrl); + } + if (page_addr != -1) { + chip->legacy.cmd_ctrl(chip, page_addr, ctrl); + chip->legacy.cmd_ctrl(chip, page_addr >> 8, + NAND_NCE | NAND_ALE); + if (chip->options & NAND_ROW_ADDR_3) + chip->legacy.cmd_ctrl(chip, page_addr >> 16, + NAND_NCE | NAND_ALE); + } + } + chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE, + NAND_NCE | NAND_CTRL_CHANGE); + + /* + * Program and erase have their own busy handlers status, sequential + * in and status need no delay. + */ + switch (command) { + + case NAND_CMD_NONE: + case NAND_CMD_CACHEDPROG: + case NAND_CMD_PAGEPROG: + case NAND_CMD_ERASE1: + case NAND_CMD_ERASE2: + case NAND_CMD_SEQIN: + case NAND_CMD_STATUS: + case NAND_CMD_READID: + case NAND_CMD_SET_FEATURES: + return; + + case NAND_CMD_RNDIN: + nand_ccs_delay(chip); + return; + + case NAND_CMD_RESET: + if (chip->legacy.dev_ready) + break; + udelay(chip->legacy.chip_delay); + chip->legacy.cmd_ctrl(chip, NAND_CMD_STATUS, + NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); + chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE, + NAND_NCE | NAND_CTRL_CHANGE); + /* EZ-NAND can take upto 250ms as per ONFi v4.0 */ + nand_wait_status_ready(mtd, 250); + return; + + case NAND_CMD_RNDOUT: + /* No ready / busy check necessary */ + chip->legacy.cmd_ctrl(chip, NAND_CMD_RNDOUTSTART, + NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); + chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE, + NAND_NCE | NAND_CTRL_CHANGE); + + nand_ccs_delay(chip); + return; + + case NAND_CMD_READ0: + /* + * READ0 is sometimes used to exit GET STATUS mode. When this + * is the case no address cycles are requested, and we can use + * this information to detect that READSTART should not be + * issued. + */ + if (column == -1 && page_addr == -1) + return; + + chip->legacy.cmd_ctrl(chip, NAND_CMD_READSTART, + NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); + chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE, + NAND_NCE | NAND_CTRL_CHANGE); + + /* This applies to read commands */ + default: + /* + * If we don't have access to the busy pin, we apply the given + * command delay. + */ + if (!chip->legacy.dev_ready) { + udelay(chip->legacy.chip_delay); + return; + } + } + + /* + * Apply this short delay always to ensure that we do wait tWB in + * any case on any machine. + */ + ndelay(100); + + nand_wait_ready(chip); +} + +/** + * nand_get_set_features_notsupp - set/get features stub returning -ENOTSUPP + * @chip: nand chip info structure + * @addr: feature address. + * @subfeature_param: the subfeature parameters, a four bytes array. + * + * Should be used by NAND controller drivers that do not support the SET/GET + * FEATURES operations. + */ +int nand_get_set_features_notsupp(struct nand_chip *chip, int addr, + u8 *subfeature_param) +{ + return -ENOTSUPP; +} +EXPORT_SYMBOL(nand_get_set_features_notsupp); + +/** + * nand_wait - [DEFAULT] wait until the command is done + * @mtd: MTD device structure + * @chip: NAND chip structure + * + * Wait for command done. This applies to erase and program only. + */ +static int nand_wait(struct nand_chip *chip) +{ + + unsigned long timeo = 400; + u8 status; + int ret; + + /* + * Apply this short delay always to ensure that we do wait tWB in any + * case on any machine. + */ + ndelay(100); + + ret = nand_status_op(chip, NULL); + if (ret) + return ret; + + if (in_interrupt() || oops_in_progress) + panic_nand_wait(chip, timeo); + else { + timeo = jiffies + msecs_to_jiffies(timeo); + do { + if (chip->legacy.dev_ready) { + if (chip->legacy.dev_ready(chip)) + break; + } else { + ret = nand_read_data_op(chip, &status, + sizeof(status), true); + if (ret) + return ret; + + if (status & NAND_STATUS_READY) + break; + } + cond_resched(); + } while (time_before(jiffies, timeo)); + } + + ret = nand_read_data_op(chip, &status, sizeof(status), true); + if (ret) + return ret; + + /* This can happen if in case of timeout or buggy dev_ready */ + WARN_ON(!(status & NAND_STATUS_READY)); + return status; +} + +void nand_legacy_set_defaults(struct nand_chip *chip) +{ + unsigned int busw = chip->options & NAND_BUSWIDTH_16; + + if (chip->exec_op) + return; + + /* check for proper chip_delay setup, set 20us if not */ + if (!chip->legacy.chip_delay) + chip->legacy.chip_delay = 20; + + /* check, if a user supplied command function given */ + if (!chip->legacy.cmdfunc && !chip->exec_op) + chip->legacy.cmdfunc = nand_command; + + /* check, if a user supplied wait function given */ + if (chip->legacy.waitfunc == NULL) + chip->legacy.waitfunc = nand_wait; + + if (!chip->select_chip) + chip->select_chip = nand_select_chip; + + /* If called twice, pointers that depend on busw may need to be reset */ + if (!chip->legacy.read_byte || chip->legacy.read_byte == nand_read_byte) + chip->legacy.read_byte = busw ? nand_read_byte16 : nand_read_byte; + if (!chip->legacy.write_buf || chip->legacy.write_buf == nand_write_buf) + chip->legacy.write_buf = busw ? nand_write_buf16 : nand_write_buf; + if (!chip->legacy.write_byte || chip->legacy.write_byte == nand_write_byte) + chip->legacy.write_byte = busw ? nand_write_byte16 : nand_write_byte; + if (!chip->legacy.read_buf || chip->legacy.read_buf == nand_read_buf) + chip->legacy.read_buf = busw ? nand_read_buf16 : nand_read_buf; +} + +void nand_legacy_adjust_cmdfunc(struct nand_chip *chip) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + + /* Do not replace user supplied command function! */ + if (mtd->writesize > 512 && chip->legacy.cmdfunc == nand_command) + chip->legacy.cmdfunc = nand_command_lp; +} + +int nand_legacy_check_hooks(struct nand_chip *chip) +{ + /* + * ->legacy.cmdfunc() is legacy and will only be used if ->exec_op() is + * not populated. + */ + if (chip->exec_op) + return 0; + + /* + * Default functions assigned for ->legacy.cmdfunc() and + * ->select_chip() both expect ->legacy.cmd_ctrl() to be populated. + */ + if ((!chip->legacy.cmdfunc || !chip->select_chip) && + !chip->legacy.cmd_ctrl) { + pr_err("->legacy.cmd_ctrl() should be provided\n"); + return -EINVAL; + } + + return 0; +} |