diff options
author | Olof Johansson <olof@lixom.net> | 2013-04-02 23:27:45 -0700 |
---|---|---|
committer | Olof Johansson <olof@lixom.net> | 2013-04-02 23:27:51 -0700 |
commit | 16eaaee4d87b2255797f94341bd442f1f93afd1b (patch) | |
tree | 616bf06039612355da8d3fcf6408701a7bb897e9 /drivers/gpio | |
parent | 8bb9660418e05bb1845ac1a2428444d78e322cc7 (diff) | |
parent | 00ae962f8051bb143fa1c43c6a9c8274c3a9c593 (diff) |
Merge tag 'renesas-boards3-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards2
Third round of Renesas ARM SoC board updates for v3.10
Highlights:
* Add Lager board support
* Add ape6evm board support
* Add Bock-W board support
* Mackerel MMCIF/SDHI clean ups
* Add ethernet support to kzm9g-reference
This pull request is based on a merge of:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-pinmux2-for-v3.10
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-boards2-for-v3.10
The merge with renesas-pinmux2-for-v3.10 was made to provide
run-time dependencies for the following changes:
ARM: shmobile: APE6EVM LAN9220 support
ARM: shmobile: APE6EVM PFC support
* tag 'renesas-boards3-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (307 commits)
ARM: shmobile: mackerel: clean up MMCIF vs. SDHI1 selection
ARM: shmobile: mackerel: add interrupt names for SDHI0
ARM: shmobile: mackerel: switch SDHI and MMCIF interfaces to slot-gpio
ARM: shmobile: mackerel: remove OCR masks, where regulators are used
ARM: shmobile: mackerel: SDHI resources do not have to be numbered
ARM: shmobile: Initial r8a7790 Lager board support
ARM: shmobile: APE6EVM LAN9220 support
ARM: shmobile: APE6EVM PFC support
ARM: shmobile: APE6EVM base support
ARM: shmobile: kzm9g-reference: add ethernet support
ARM: shmobile: add R-Car M1A Bock-W platform support
sh-pfc: r8a73a4: Remove unused GPIO bias data
ARM: shmobile: r8a73a4: Remove all GPIO enums
sh-pfc: r8a73a4: Remove function GPIOs
ARM: shmobile: r8a73a4: Remove IRQC function GPIOs
ARM: shmobile: r8a73a4: Remove SCIF function GPIOs
sh-pfc: r8a73a4: Remove IRQC function GPIOS
sh-pfc: r8a73a4: Remove SCIF function GPIOS
sh-pfc: r8a73a4: Add IRQC pin groups and functions
sh-pfc: r8a73a4: Add SCIF pin groups and functions
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Diffstat (limited to 'drivers/gpio')
-rw-r--r-- | drivers/gpio/Kconfig | 6 | ||||
-rw-r--r-- | drivers/gpio/Makefile | 1 | ||||
-rw-r--r-- | drivers/gpio/gpio-pl061.c | 117 | ||||
-rw-r--r-- | drivers/gpio/gpio-rcar.c | 396 | ||||
-rw-r--r-- | drivers/gpio/gpiolib-of.c | 20 |
5 files changed, 485 insertions, 55 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 93aaadf99f28..d766e3cbef18 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -204,6 +204,12 @@ config GPIO_PXA help Say yes here to support the PXA GPIO device +config GPIO_RCAR + tristate "Renesas R-Car GPIO" + depends on ARM + help + Say yes here to support GPIO on Renesas R-Car SoCs. + config GPIO_SPEAR_SPICS bool "ST SPEAr13xx SPI Chip Select as GPIO support" depends on PLAT_SPEAR diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 22e07bc9fcb5..b41c74d45287 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -57,6 +57,7 @@ obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o +obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o obj-$(CONFIG_GPIO_SCH) += gpio-sch.o diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c index b820869ca93c..06ed257c5d31 100644 --- a/drivers/gpio/gpio-pl061.c +++ b/drivers/gpio/gpio-pl061.c @@ -15,6 +15,7 @@ #include <linux/io.h> #include <linux/ioport.h> #include <linux/irq.h> +#include <linux/irqdomain.h> #include <linux/bitops.h> #include <linux/workqueue.h> #include <linux/gpio.h> @@ -22,6 +23,7 @@ #include <linux/amba/bus.h> #include <linux/amba/pl061.h> #include <linux/slab.h> +#include <linux/pinctrl/consumer.h> #include <linux/pm.h> #include <asm/mach/irq.h> @@ -51,8 +53,7 @@ struct pl061_gpio { spinlock_t lock; void __iomem *base; - int irq_base; - struct irq_chip_generic *irq_gc; + struct irq_domain *domain; struct gpio_chip gc; #ifdef CONFIG_PM @@ -60,6 +61,17 @@ struct pl061_gpio { #endif }; +static int pl061_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + /* + * Map back to global GPIO space and request muxing, the direction + * parameter does not matter for this controller. + */ + int gpio = chip->base + offset; + + return pinctrl_request_gpio(gpio); +} + static int pl061_direction_input(struct gpio_chip *gc, unsigned offset) { struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc); @@ -122,24 +134,20 @@ static int pl061_to_irq(struct gpio_chip *gc, unsigned offset) { struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc); - if (chip->irq_base <= 0) - return -EINVAL; - - return chip->irq_base + offset; + return irq_create_mapping(chip->domain, offset); } static int pl061_irq_type(struct irq_data *d, unsigned trigger) { - struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); - struct pl061_gpio *chip = gc->private; - int offset = d->irq - chip->irq_base; + struct pl061_gpio *chip = irq_data_get_irq_chip_data(d); + int offset = irqd_to_hwirq(d); unsigned long flags; u8 gpiois, gpioibe, gpioiev; if (offset < 0 || offset >= PL061_GPIO_NR) return -EINVAL; - raw_spin_lock_irqsave(&gc->lock, flags); + spin_lock_irqsave(&chip->lock, flags); gpioiev = readb(chip->base + GPIOIEV); @@ -168,7 +176,7 @@ static int pl061_irq_type(struct irq_data *d, unsigned trigger) writeb(gpioiev, chip->base + GPIOIEV); - raw_spin_unlock_irqrestore(&gc->lock, flags); + spin_unlock_irqrestore(&chip->lock, flags); return 0; } @@ -192,31 +200,61 @@ static void pl061_irq_handler(unsigned irq, struct irq_desc *desc) chained_irq_exit(irqchip, desc); } -static void __init pl061_init_gc(struct pl061_gpio *chip, int irq_base) +static void pl061_irq_mask(struct irq_data *d) { - struct irq_chip_type *ct; + struct pl061_gpio *chip = irq_data_get_irq_chip_data(d); + u8 mask = 1 << (irqd_to_hwirq(d) % PL061_GPIO_NR); + u8 gpioie; + + spin_lock(&chip->lock); + gpioie = readb(chip->base + GPIOIE) & ~mask; + writeb(gpioie, chip->base + GPIOIE); + spin_unlock(&chip->lock); +} + +static void pl061_irq_unmask(struct irq_data *d) +{ + struct pl061_gpio *chip = irq_data_get_irq_chip_data(d); + u8 mask = 1 << (irqd_to_hwirq(d) % PL061_GPIO_NR); + u8 gpioie; + + spin_lock(&chip->lock); + gpioie = readb(chip->base + GPIOIE) | mask; + writeb(gpioie, chip->base + GPIOIE); + spin_unlock(&chip->lock); +} - chip->irq_gc = irq_alloc_generic_chip("gpio-pl061", 1, irq_base, - chip->base, handle_simple_irq); - chip->irq_gc->private = chip; +static struct irq_chip pl061_irqchip = { + .name = "pl061 gpio", + .irq_mask = pl061_irq_mask, + .irq_unmask = pl061_irq_unmask, + .irq_set_type = pl061_irq_type, +}; + +static int pl061_irq_map(struct irq_domain *d, unsigned int virq, + irq_hw_number_t hw) +{ + struct pl061_gpio *chip = d->host_data; - ct = chip->irq_gc->chip_types; - ct->chip.irq_mask = irq_gc_mask_clr_bit; - ct->chip.irq_unmask = irq_gc_mask_set_bit; - ct->chip.irq_set_type = pl061_irq_type; - ct->chip.irq_set_wake = irq_gc_set_wake; - ct->regs.mask = GPIOIE; + irq_set_chip_and_handler_name(virq, &pl061_irqchip, handle_simple_irq, + "pl061"); + irq_set_chip_data(virq, chip); + irq_set_irq_type(virq, IRQ_TYPE_NONE); - irq_setup_generic_chip(chip->irq_gc, IRQ_MSK(PL061_GPIO_NR), - IRQ_GC_INIT_NESTED_LOCK, IRQ_NOREQUEST, 0); + return 0; } +static const struct irq_domain_ops pl061_domain_ops = { + .map = pl061_irq_map, + .xlate = irq_domain_xlate_twocell, +}; + static int pl061_probe(struct amba_device *adev, const struct amba_id *id) { struct device *dev = &adev->dev; struct pl061_platform_data *pdata = dev->platform_data; struct pl061_gpio *chip; - int ret, irq, i; + int ret, irq, i, irq_base; chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); if (chip == NULL) @@ -224,24 +262,31 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id) if (pdata) { chip->gc.base = pdata->gpio_base; - chip->irq_base = pdata->irq_base; - } else if (adev->dev.of_node) { + irq_base = pdata->irq_base; + if (irq_base <= 0) + return -ENODEV; + } else { chip->gc.base = -1; - chip->irq_base = 0; - } else - return -ENODEV; + irq_base = 0; + } if (!devm_request_mem_region(dev, adev->res.start, - resource_size(&adev->res), "pl061")) + resource_size(&adev->res), "pl061")) return -EBUSY; chip->base = devm_ioremap(dev, adev->res.start, - resource_size(&adev->res)); - if (chip->base == NULL) + resource_size(&adev->res)); + if (!chip->base) return -ENOMEM; + chip->domain = irq_domain_add_simple(adev->dev.of_node, PL061_GPIO_NR, + irq_base, &pl061_domain_ops, chip); + if (!chip->domain) + return -ENODEV; + spin_lock_init(&chip->lock); + chip->gc.request = pl061_gpio_request; chip->gc.direction_input = pl061_direction_input; chip->gc.direction_output = pl061_direction_output; chip->gc.get = pl061_get_value; @@ -259,12 +304,6 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id) /* * irq_chip support */ - - if (chip->irq_base <= 0) - return 0; - - pl061_init_gc(chip, chip->irq_base); - writeb(0, chip->base + GPIOIE); /* disable irqs */ irq = adev->irq[0]; if (irq < 0) diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c new file mode 100644 index 000000000000..b4ca450947b8 --- /dev/null +++ b/drivers/gpio/gpio-rcar.c @@ -0,0 +1,396 @@ +/* + * Renesas R-Car GPIO Support + * + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/module.h> +#include <linux/pinctrl/consumer.h> +#include <linux/platform_data/gpio-rcar.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/slab.h> + +struct gpio_rcar_priv { + void __iomem *base; + spinlock_t lock; + struct gpio_rcar_config config; + struct platform_device *pdev; + struct gpio_chip gpio_chip; + struct irq_chip irq_chip; + struct irq_domain *irq_domain; +}; + +#define IOINTSEL 0x00 +#define INOUTSEL 0x04 +#define OUTDT 0x08 +#define INDT 0x0c +#define INTDT 0x10 +#define INTCLR 0x14 +#define INTMSK 0x18 +#define MSKCLR 0x1c +#define POSNEG 0x20 +#define EDGLEVEL 0x24 +#define FILONOFF 0x28 + +static inline u32 gpio_rcar_read(struct gpio_rcar_priv *p, int offs) +{ + return ioread32(p->base + offs); +} + +static inline void gpio_rcar_write(struct gpio_rcar_priv *p, int offs, + u32 value) +{ + iowrite32(value, p->base + offs); +} + +static void gpio_rcar_modify_bit(struct gpio_rcar_priv *p, int offs, + int bit, bool value) +{ + u32 tmp = gpio_rcar_read(p, offs); + + if (value) + tmp |= BIT(bit); + else + tmp &= ~BIT(bit); + + gpio_rcar_write(p, offs, tmp); +} + +static void gpio_rcar_irq_disable(struct irq_data *d) +{ + struct gpio_rcar_priv *p = irq_data_get_irq_chip_data(d); + + gpio_rcar_write(p, INTMSK, ~BIT(irqd_to_hwirq(d))); +} + +static void gpio_rcar_irq_enable(struct irq_data *d) +{ + struct gpio_rcar_priv *p = irq_data_get_irq_chip_data(d); + + gpio_rcar_write(p, MSKCLR, BIT(irqd_to_hwirq(d))); +} + +static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p, + unsigned int hwirq, + bool active_high_rising_edge, + bool level_trigger) +{ + unsigned long flags; + + /* follow steps in the GPIO documentation for + * "Setting Edge-Sensitive Interrupt Input Mode" and + * "Setting Level-Sensitive Interrupt Input Mode" + */ + + spin_lock_irqsave(&p->lock, flags); + + /* Configure postive or negative logic in POSNEG */ + gpio_rcar_modify_bit(p, POSNEG, hwirq, !active_high_rising_edge); + + /* Configure edge or level trigger in EDGLEVEL */ + gpio_rcar_modify_bit(p, EDGLEVEL, hwirq, !level_trigger); + + /* Select "Interrupt Input Mode" in IOINTSEL */ + gpio_rcar_modify_bit(p, IOINTSEL, hwirq, true); + + /* Write INTCLR in case of edge trigger */ + if (!level_trigger) + gpio_rcar_write(p, INTCLR, BIT(hwirq)); + + spin_unlock_irqrestore(&p->lock, flags); +} + +static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct gpio_rcar_priv *p = irq_data_get_irq_chip_data(d); + unsigned int hwirq = irqd_to_hwirq(d); + + dev_dbg(&p->pdev->dev, "sense irq = %d, type = %d\n", hwirq, type); + + switch (type & IRQ_TYPE_SENSE_MASK) { + case IRQ_TYPE_LEVEL_HIGH: + gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true); + break; + case IRQ_TYPE_LEVEL_LOW: + gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true); + break; + case IRQ_TYPE_EDGE_RISING: + gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false); + break; + case IRQ_TYPE_EDGE_FALLING: + gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false); + break; + default: + return -EINVAL; + } + return 0; +} + +static irqreturn_t gpio_rcar_irq_handler(int irq, void *dev_id) +{ + struct gpio_rcar_priv *p = dev_id; + u32 pending; + unsigned int offset, irqs_handled = 0; + + while ((pending = gpio_rcar_read(p, INTDT))) { + offset = __ffs(pending); + gpio_rcar_write(p, INTCLR, BIT(offset)); + generic_handle_irq(irq_find_mapping(p->irq_domain, offset)); + irqs_handled++; + } + + return irqs_handled ? IRQ_HANDLED : IRQ_NONE; +} + +static inline struct gpio_rcar_priv *gpio_to_priv(struct gpio_chip *chip) +{ + return container_of(chip, struct gpio_rcar_priv, gpio_chip); +} + +static void gpio_rcar_config_general_input_output_mode(struct gpio_chip *chip, + unsigned int gpio, + bool output) +{ + struct gpio_rcar_priv *p = gpio_to_priv(chip); + unsigned long flags; + + /* follow steps in the GPIO documentation for + * "Setting General Output Mode" and + * "Setting General Input Mode" + */ + + spin_lock_irqsave(&p->lock, flags); + + /* Configure postive logic in POSNEG */ + gpio_rcar_modify_bit(p, POSNEG, gpio, false); + + /* Select "General Input/Output Mode" in IOINTSEL */ + gpio_rcar_modify_bit(p, IOINTSEL, gpio, false); + + /* Select Input Mode or Output Mode in INOUTSEL */ + gpio_rcar_modify_bit(p, INOUTSEL, gpio, output); + + spin_unlock_irqrestore(&p->lock, flags); +} + +static int gpio_rcar_request(struct gpio_chip *chip, unsigned offset) +{ + return pinctrl_request_gpio(chip->base + offset); +} + +static void gpio_rcar_free(struct gpio_chip *chip, unsigned offset) +{ + pinctrl_free_gpio(chip->base + offset); + + /* Set the GPIO as an input to ensure that the next GPIO request won't + * drive the GPIO pin as an output. + */ + gpio_rcar_config_general_input_output_mode(chip, offset, false); +} + +static int gpio_rcar_direction_input(struct gpio_chip *chip, unsigned offset) +{ + gpio_rcar_config_general_input_output_mode(chip, offset, false); + return 0; +} + +static int gpio_rcar_get(struct gpio_chip *chip, unsigned offset) +{ + return (int)(gpio_rcar_read(gpio_to_priv(chip), INDT) & BIT(offset)); +} + +static void gpio_rcar_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct gpio_rcar_priv *p = gpio_to_priv(chip); + unsigned long flags; + + spin_lock_irqsave(&p->lock, flags); + gpio_rcar_modify_bit(p, OUTDT, offset, value); + spin_unlock_irqrestore(&p->lock, flags); +} + +static int gpio_rcar_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + /* write GPIO value to output before selecting output mode of pin */ + gpio_rcar_set(chip, offset, value); + gpio_rcar_config_general_input_output_mode(chip, offset, true); + return 0; +} + +static int gpio_rcar_to_irq(struct gpio_chip *chip, unsigned offset) +{ + return irq_create_mapping(gpio_to_priv(chip)->irq_domain, offset); +} + +static int gpio_rcar_irq_domain_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct gpio_rcar_priv *p = h->host_data; + + dev_dbg(&p->pdev->dev, "map hw irq = %d, virq = %d\n", (int)hw, virq); + + irq_set_chip_data(virq, h->host_data); + irq_set_chip_and_handler(virq, &p->irq_chip, handle_level_irq); + set_irq_flags(virq, IRQF_VALID); /* kill me now */ + return 0; +} + +static struct irq_domain_ops gpio_rcar_irq_domain_ops = { + .map = gpio_rcar_irq_domain_map, +}; + +static int gpio_rcar_probe(struct platform_device *pdev) +{ + struct gpio_rcar_config *pdata = pdev->dev.platform_data; + struct gpio_rcar_priv *p; + struct resource *io, *irq; + struct gpio_chip *gpio_chip; + struct irq_chip *irq_chip; + const char *name = dev_name(&pdev->dev); + int ret; + + p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL); + if (!p) { + dev_err(&pdev->dev, "failed to allocate driver data\n"); + ret = -ENOMEM; + goto err0; + } + + /* deal with driver instance configuration */ + if (pdata) + p->config = *pdata; + + p->pdev = pdev; + platform_set_drvdata(pdev, p); + spin_lock_init(&p->lock); + + io = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + + if (!io || !irq) { + dev_err(&pdev->dev, "missing IRQ or IOMEM\n"); + ret = -EINVAL; + goto err0; + } + + p->base = devm_ioremap_nocache(&pdev->dev, io->start, + resource_size(io)); + if (!p->base) { + dev_err(&pdev->dev, "failed to remap I/O memory\n"); + ret = -ENXIO; + goto err0; + } + + gpio_chip = &p->gpio_chip; + gpio_chip->request = gpio_rcar_request; + gpio_chip->free = gpio_rcar_free; + gpio_chip->direction_input = gpio_rcar_direction_input; + gpio_chip->get = gpio_rcar_get; + gpio_chip->direction_output = gpio_rcar_direction_output; + gpio_chip->set = gpio_rcar_set; + gpio_chip->to_irq = gpio_rcar_to_irq; + gpio_chip->label = name; + gpio_chip->owner = THIS_MODULE; + gpio_chip->base = p->config.gpio_base; + gpio_chip->ngpio = p->config.number_of_pins; + + irq_chip = &p->irq_chip; + irq_chip->name = name; + irq_chip->irq_mask = gpio_rcar_irq_disable; + irq_chip->irq_unmask = gpio_rcar_irq_enable; + irq_chip->irq_enable = gpio_rcar_irq_enable; + irq_chip->irq_disable = gpio_rcar_irq_disable; + irq_chip->irq_set_type = gpio_rcar_irq_set_type; + irq_chip->flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_SET_TYPE_MASKED; + + p->irq_domain = irq_domain_add_simple(pdev->dev.of_node, + p->config.number_of_pins, + p->config.irq_base, + &gpio_rcar_irq_domain_ops, p); + if (!p->irq_domain) { + ret = -ENXIO; + dev_err(&pdev->dev, "cannot initialize irq domain\n"); + goto err1; + } + + if (devm_request_irq(&pdev->dev, irq->start, + gpio_rcar_irq_handler, 0, name, p)) { + dev_err(&pdev->dev, "failed to request IRQ\n"); + ret = -ENOENT; + goto err1; + } + + ret = gpiochip_add(gpio_chip); + if (ret) { + dev_err(&pdev->dev, "failed to add GPIO controller\n"); + goto err1; + } + + dev_info(&pdev->dev, "driving %d GPIOs\n", p->config.number_of_pins); + + /* warn in case of mismatch if irq base is specified */ + if (p->config.irq_base) { + ret = irq_find_mapping(p->irq_domain, 0); + if (p->config.irq_base != ret) + dev_warn(&pdev->dev, "irq base mismatch (%u/%u)\n", + p->config.irq_base, ret); + } + + ret = gpiochip_add_pin_range(gpio_chip, p->config.pctl_name, 0, + gpio_chip->base, gpio_chip->ngpio); + if (ret < 0) + dev_warn(&pdev->dev, "failed to add pin range\n"); + + return 0; + +err1: + irq_domain_remove(p->irq_domain); +err0: + return ret; +} + +static int gpio_rcar_remove(struct platform_device *pdev) +{ + struct gpio_rcar_priv *p = platform_get_drvdata(pdev); + int ret; + + ret = gpiochip_remove(&p->gpio_chip); + if (ret) + return ret; + + irq_domain_remove(p->irq_domain); + return 0; +} + +static struct platform_driver gpio_rcar_device_driver = { + .probe = gpio_rcar_probe, + .remove = gpio_rcar_remove, + .driver = { + .name = "gpio_rcar", + } +}; + +module_platform_driver(gpio_rcar_device_driver); + +MODULE_AUTHOR("Magnus Damm"); +MODULE_DESCRIPTION("Renesas R-Car GPIO Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index a71a54a3e3f7..465f4ca57e80 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -193,7 +193,7 @@ static void of_gpiochip_add_pin_range(struct gpio_chip *chip) if (!np) return; - do { + for (;; index++) { ret = of_parse_phandle_with_args(np, "gpio-ranges", "#gpio-range-cells", index, &pinspec); if (ret) @@ -203,27 +203,15 @@ static void of_gpiochip_add_pin_range(struct gpio_chip *chip) if (!pctldev) break; - /* - * This assumes that the n GPIO pins are consecutive in the - * GPIO number space, and that the pins are also consecutive - * in their local number space. Currently it is not possible - * to add different ranges for one and the same GPIO chip, - * as the code assumes that we have one consecutive range - * on both, mapping 1-to-1. - * - * TODO: make the OF bindings handle multiple sparse ranges - * on the same GPIO chip. - */ ret = gpiochip_add_pin_range(chip, pinctrl_dev_get_devname(pctldev), - 0, /* offset in gpiochip */ pinspec.args[0], - pinspec.args[1]); + pinspec.args[1], + pinspec.args[2]); if (ret) break; - - } while (index++); + } } #else |