firmware: scm: Add new SCM call API for switching memory ownership

Two different processors on a SOC need to switch memory ownership
during load/unload. To enable this, second level memory map table
need to be updated, which is done by secure layer.
This patch adds the interface for making secure monitor call for
memory ownership switching request.

Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
[bjorn: Minor style and kerneldoc updates]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

4 files changed, 134 insertions, 0 deletions

diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c
index 93e3b96b6dfa..60d96bcf6694 100644
--- a/drivers/firmware/qcom_scm-32.c
+++ b/drivers/firmware/qcom_scm-32.c
@@ -579,6 +579,13 @@ int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
 	return ret ? : le32_to_cpu(scm_ret);
 }
 
+int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
+			  size_t mem_sz, phys_addr_t src, size_t src_sz,
+			  phys_addr_t dest, size_t dest_sz)
+{
+	return -ENODEV;
+}
+
 int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
 			       u32 spare)
 {
diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c
index 6e6d561708e2..ea5b1e680f67 100644
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
@@ -382,6 +382,33 @@ int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
 	return ret ? : res.a1;
 }
 
+int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
+			  size_t mem_sz, phys_addr_t src, size_t src_sz,
+			  phys_addr_t dest, size_t dest_sz)
+{
+	int ret;
+	struct qcom_scm_desc desc = {0};
+	struct arm_smccc_res res;
+
+	desc.args[0] = mem_region;
+	desc.args[1] = mem_sz;
+	desc.args[2] = src;
+	desc.args[3] = src_sz;
+	desc.args[4] = dest;
+	desc.args[5] = dest_sz;
+	desc.args[6] = 0;
+
+	desc.arginfo = QCOM_SCM_ARGS(7, QCOM_SCM_RO, QCOM_SCM_VAL,
+				     QCOM_SCM_RO, QCOM_SCM_VAL, QCOM_SCM_RO,
+				     QCOM_SCM_VAL, QCOM_SCM_VAL);
+
+	ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP,
+			    QCOM_MEM_PROT_ASSIGN_ID,
+			    &desc, &res);
+
+	return ret ? : res.a1;
+}
+
 int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id, u32 spare)
 {
 	struct qcom_scm_desc desc = {0};
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index bb16510d75ba..334eaa341828 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -40,6 +40,19 @@ struct qcom_scm {
 	struct reset_controller_dev reset;
 };
 
+struct qcom_scm_current_perm_info {
+	__le32 vmid;
+	__le32 perm;
+	__le64 ctx;
+	__le32 ctx_size;
+	__le32 unused;
+};
+
+struct qcom_scm_mem_map_info {
+	__le64 mem_addr;
+	__le64 mem_size;
+};
+
 static struct qcom_scm *__scm;
 
 static int qcom_scm_clk_enable(void)
@@ -348,6 +361,88 @@ int qcom_scm_set_remote_state(u32 state, u32 id)
 }
 EXPORT_SYMBOL(qcom_scm_set_remote_state);
 
+/**
+ * qcom_scm_assign_mem() - Make a secure call to reassign memory ownership
+ * @mem_addr: mem region whose ownership need to be reassigned
+ * @mem_sz:   size of the region.
+ * @srcvm:    vmid for current set of owners, each set bit in
+ *            flag indicate a unique owner
+ * @newvm:    array having new owners and corrsponding permission
+ *            flags
+ * @dest_cnt: number of owners in next set.
+ *
+ * Return negative errno on failure, 0 on success, with @srcvm updated.
+ */
+int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
+			unsigned int *srcvm,
+			struct qcom_scm_vmperm *newvm, int dest_cnt)
+{
+	struct qcom_scm_current_perm_info *destvm;
+	struct qcom_scm_mem_map_info *mem_to_map;
+	phys_addr_t mem_to_map_phys;
+	phys_addr_t dest_phys;
+	phys_addr_t ptr_phys;
+	size_t mem_to_map_sz;
+	size_t dest_sz;
+	size_t src_sz;
+	size_t ptr_sz;
+	int next_vm;
+	__le32 *src;
+	void *ptr;
+	int ret;
+	int len;
+	int i;
+
+	src_sz = hweight_long(*srcvm) * sizeof(*src);
+	mem_to_map_sz = sizeof(*mem_to_map);
+	dest_sz = dest_cnt * sizeof(*destvm);
+	ptr_sz = ALIGN(src_sz, SZ_64) + ALIGN(mem_to_map_sz, SZ_64) +
+			ALIGN(dest_sz, SZ_64);
+
+	ptr = dma_alloc_coherent(__scm->dev, ptr_sz, &ptr_phys, GFP_KERNEL);
+	if (!ptr)
+		return -ENOMEM;
+
+	/* Fill source vmid detail */
+	src = ptr;
+	len = hweight_long(*srcvm);
+	for (i = 0; i < len; i++) {
+		src[i] = cpu_to_le32(ffs(*srcvm) - 1);
+		*srcvm ^= 1 << (ffs(*srcvm) - 1);
+	}
+
+	/* Fill details of mem buff to map */
+	mem_to_map = ptr + ALIGN(src_sz, SZ_64);
+	mem_to_map_phys = ptr_phys + ALIGN(src_sz, SZ_64);
+	mem_to_map[0].mem_addr = cpu_to_le64(mem_addr);
+	mem_to_map[0].mem_size = cpu_to_le64(mem_sz);
+
+	next_vm = 0;
+	/* Fill details of next vmid detail */
+	destvm = ptr + ALIGN(mem_to_map_sz, SZ_64) + ALIGN(src_sz, SZ_64);
+	dest_phys = ptr_phys + ALIGN(mem_to_map_sz, SZ_64) + ALIGN(src_sz, SZ_64);
+	for (i = 0; i < dest_cnt; i++) {
+		destvm[i].vmid = cpu_to_le32(newvm[i].vmid);
+		destvm[i].perm = cpu_to_le32(newvm[i].perm);
+		destvm[i].ctx = 0;
+		destvm[i].ctx_size = 0;
+		next_vm |= BIT(newvm[i].vmid);
+	}
+
+	ret = __qcom_scm_assign_mem(__scm->dev, mem_to_map_phys, mem_to_map_sz,
+				    ptr_phys, src_sz, dest_phys, dest_sz);
+	dma_free_coherent(__scm->dev, ALIGN(ptr_sz, SZ_64), ptr, ptr_phys);
+	if (ret) {
+		dev_err(__scm->dev,
+			"Assign memory protection call failed %d.\n", ret);
+		return -EINVAL;
+	}
+
+	*srcvm = next_vm;
+	return 0;
+}
+EXPORT_SYMBOL(qcom_scm_assign_mem);
+
 static int qcom_scm_probe(struct platform_device *pdev)
 {
 	struct qcom_scm *scm;
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index 9bea691f30fb..fe54b7ba4db4 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -95,5 +95,10 @@ extern int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
 					     size_t *size);
 extern int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr,
 					     u32 size, u32 spare);
+#define QCOM_MEM_PROT_ASSIGN_ID	0x16
+extern int  __qcom_scm_assign_mem(struct device *dev,
+				  phys_addr_t mem_region, size_t mem_sz,
+				  phys_addr_t src, size_t src_sz,
+				  phys_addr_t dest, size_t dest_sz);
 
 #endif