diff options
| author | Biju Das <biju.das.jz@bp.renesas.com> | 2023-03-30 12:16:30 +0100 |
|---|---|---|
| committer | Lee Jones <lee@kernel.org> | 2023-04-26 11:40:35 +0100 |
| commit | 0be8907359df4c62319f5cb2c6981ff0d9ebf35a (patch) | |
| tree | 2d03f6a7a0213fe1d98cffd7e8d694d2815ca3b5 /drivers/counter/Makefile | |
| parent | 7bb985ac03c4a91d185c006f68c4fadfb71e1cca (diff) | |
counter: Add Renesas RZ/G2L MTU3a counter driver
Add RZ/G2L MTU3a counter driver. This IP supports the following
phase counting modes on MTU1 and MTU2 channels
1) 16-bit phase counting modes on MTU1 and MTU2 channels.
2) 32-bit phase counting mode by cascading MTU1 and MTU2 channels.
This patch adds 3 counter value channels.
count0: 16-bit phase counter value channel on MTU1
count1: 16-bit phase counter value channel on MTU2
count2: 32-bit phase counter value channel by cascading
MTU1 and MTU2 channels.
The external input phase clock pin for the counter value channels
are as follows:
count0: "MTCLKA-MTCLKB"
count1: "MTCLKA-MTCLKB" or "MTCLKC-MTCLKD"
count2: "MTCLKA-MTCLKB" or "MTCLKC-MTCLKD"
Use the sysfs variable "external_input_phase_clock_select" to select the
external input phase clock pin and "cascade_counts_enable" to enable/
disable cascading of channels.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230330111632.169434-5-biju.das.jz@bp.renesas.com
Diffstat (limited to 'drivers/counter/Makefile')
| -rw-r--r-- | drivers/counter/Makefile | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/counter/Makefile b/drivers/counter/Makefile index b9a369e0d4fc..933fdd50b3e4 100644 --- a/drivers/counter/Makefile +++ b/drivers/counter/Makefile @@ -8,6 +8,7 @@ counter-y := counter-core.o counter-sysfs.o counter-chrdev.o obj-$(CONFIG_104_QUAD_8) += 104-quad-8.o obj-$(CONFIG_INTERRUPT_CNT) += interrupt-cnt.o +obj-$(CONFIG_RZ_MTU3_CNT) += rz-mtu3-cnt.o obj-$(CONFIG_STM32_TIMER_CNT) += stm32-timer-cnt.o obj-$(CONFIG_STM32_LPTIMER_CNT) += stm32-lptimer-cnt.o obj-$(CONFIG_TI_EQEP) += ti-eqep.o |