summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>2023-02-13 14:31:18 +0530
committerBjorn Andersson <andersson@kernel.org>2023-02-13 14:18:21 -0800
commit2d5cab9232ba6bac734186f3e74fb106793bc738 (patch)
tree003fa73779be1722b4deabf5edea29dbf09619a4 /arch
parent574f2ffd45dc786dc443c5e11ea477420ffa5f52 (diff)
arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly
Nodes like pwrkey, resin, iadc, adc-tm, temp-alarm which are the grand children of spmi_bus node represent the interrupt generating devices but don't have "interrupt-parent" property. As per the devicetree spec v0.3, section 2.4: "The physical wiring of an interrupt source to an interrupt controller is represented in the devicetree with the interrupt-parent property. Nodes that represent interrupt-generating devices contain an interrupt-parent property which has a phandle value that points to the device to which the device’s interrupts are routed, typically an interrupt controller. If an interrupt-generating device does not have an interrupt-parent property, its interrupt parent is assumed to be its devicetree parent." This clearly says that if the "interrupt-parent" property is absent, then the immediate devicetree parent will be assumed as the interrupt parent. But the immediate parents of these nodes are not interrupt controllers themselves. This may lead to failure while wiring the interrupt for these nodes by an operating system. But a few operating systems like Linux, workaround this issue by walking up the parent nodes until it finds the "interrupt-cells" property. Then the node that has the "interrupt-cells" property will be used as the interrupt parent. But this workaround is not as per the DT spec and is not being implemented by other operating systems such as OpenBSD. Hence, fix this issue by adding the "interrupts-extended" property that explicitly specifies the spmi_bus node as the interrupt parent. Note that the "interrupts-extended" property is chosen over "interrupt-parent" as it allows specifying both interrupt parent phandle and interrupt specifiers in a single property. Reported-by: Patrick Wildt <patrick@blueri.se> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230213090118.11527-1-manivannan.sadhasivam@linaro.org
Diffstat (limited to 'arch')
-rw-r--r--arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi12
1 files changed, 6 insertions, 6 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
index f2c0b71b5d8e..df7d28f7ae60 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
@@ -64,14 +64,14 @@
pmk8280_pon_pwrkey: pwrkey {
compatible = "qcom,pmk8350-pwrkey";
- interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+ interrupts-extended = <&spmi_bus 0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
linux,code = <KEY_POWER>;
status = "disabled";
};
pmk8280_pon_resin: resin {
compatible = "qcom,pmk8350-resin";
- interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+ interrupts-extended = <&spmi_bus 0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
status = "disabled";
};
};
@@ -79,7 +79,7 @@
pmk8280_vadc: adc@3100 {
compatible = "qcom,spmi-adc7";
reg = <0x3100>;
- interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ interrupts-extended = <&spmi_bus 0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
#io-channel-cells = <1>;
@@ -89,7 +89,7 @@
pmk8280_adc_tm: adc-tm@3400 {
compatible = "qcom,spmi-adc-tm5-gen2";
reg = <0x3400>;
- interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+ interrupts-extended = <&spmi_bus 0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
#thermal-sensor-cells = <1>;
@@ -106,7 +106,7 @@
pm8280_1_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
- interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ interrupts-extended = <&spmi_bus 0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
@@ -158,7 +158,7 @@
pm8280_2_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
- interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};