Merge tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC updates from Arnd Bergmann:
 "The code changes are mostly for 32-bit platforms and include:

   - Lots of updates for the Nvidia Tegra platform, including cpuidle,
     pmc, and dt-binding changes

   - Microchip at91 power management updates for the recently added
     sam9x60 SoC

   - Treewide setup_irq deprecation by afzal mohammed

   - STMicroelectronics stm32 gains earlycon support

   - Renesas platforms with Cortex-A9 can now use the global timer

   - Some TI OMAP2+ platforms gain cpuidle support

   - Various cleanups for the i.MX6 and Orion platforms, as well as
     Kconfig files across all platforms"

* tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits)
  ARM: qcom: Add support for IPQ40xx
  ARM: mmp: replace setup_irq() by request_irq()
  ARM: cns3xxx: replace setup_irq() by request_irq()
  ARM: spear: replace setup_irq() by request_irq()
  ARM: ep93xx: Replace setup_irq() by request_irq()
  ARM: iop32x: replace setup_irq() by request_irq()
  arm: mach-dove: Mark dove_io_desc as __maybe_unused
  ARM: orion: replace setup_irq() by request_irq()
  ARM: debug: stm32: add UART early console support for STM32MP1
  ARM: debug: stm32: add UART early console support for STM32H7
  ARM: debug: stm32: add UART early console configuration for STM32F7
  ARM: debug: stm32: add UART early console configuration for STM32F4
  cpuidle: tegra: Disable CC6 state if LP2 unavailable
  cpuidle: tegra: Squash Tegra114 driver into the common driver
  cpuidle: tegra: Squash Tegra30 driver into the common driver
  cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle
  ARM: tegra: cpuidle: Remove unnecessary memory barrier
  ARM: tegra: cpuidle: Make abort_flag atomic
  ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2
  ARM: tegra: Make outer_disable() open-coded
  ...

58 files changed, 505 insertions, 932 deletions

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index b70d7debf5ca..f46e18a77645 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1201,23 +1201,49 @@ choice
 
 	config STM32F4_DEBUG_UART
 		bool "Use STM32F4 UART for low-level debug"
-		depends on ARCH_STM32
+		depends on MACH_STM32F429 || MACH_STM32F469
 		select DEBUG_STM32_UART
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on STM32F4 based platforms, which default UART is wired on
-		  USART1.
+		  USART1, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS.
 
 		  If unsure, say N.
 
 	config STM32F7_DEBUG_UART
 		bool "Use STM32F7 UART for low-level debug"
-		depends on ARCH_STM32
+		depends on MACH_STM32F746 || MACH_STM32F769
 		select DEBUG_STM32_UART
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on STM32F7 based platforms, which default UART is wired on
-		  USART1.
+		  USART1, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS.
+
+		  If unsure, say N.
+
+	config STM32H7_DEBUG_UART
+		bool "Use STM32H7 UART for low-level debug"
+		depends on MACH_STM32H743
+		select DEBUG_STM32_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STM32H7 based platforms, which default UART is wired on
+		  USART1, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS.
+
+		  If unsure, say N.
+
+	config STM32MP1_DEBUG_UART
+		bool "Use STM32MP1 UART for low-level debug"
+		depends on MACH_STM32MP157
+		select DEBUG_STM32_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STM32MP1 based platforms, wich default UART is wired on
+		  UART4, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT.
 
 		  If unsure, say N.
 
@@ -1619,6 +1645,9 @@ config DEBUG_UART_PHYS
 	default 0x3e000000 if DEBUG_BCM_KONA_UART
 	default 0x3f201000 if DEBUG_BCM2836
 	default 0x4000e400 if DEBUG_LL_UART_EFM32
+	default 0x40010000 if STM32MP1_DEBUG_UART
+	default 0x40011000 if STM32F4_DEBUG_UART || STM32F7_DEBUG_UART || \
+				STM32H7_DEBUG_UART
 	default 0x40028000 if DEBUG_AT91_SAMV7_USART1
 	default 0x40081000 if DEBUG_LPC18XX_UART0
 	default 0x40090000 if DEBUG_LPC32XX
@@ -1713,7 +1742,7 @@ config DEBUG_UART_PHYS
 		DEBUG_S3C64XX_UART || \
 		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
 		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
-		DEBUG_AT91_UART
+		DEBUG_AT91_UART || DEBUG_STM32_UART
 
 config DEBUG_UART_VIRT
 	hex "Virtual base address of debug UART"
@@ -1779,6 +1808,7 @@ config DEBUG_UART_VIRT
 	default 0xfcfe8600 if DEBUG_BCM63XX_UART
 	default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
 	default 0xfd883000 if DEBUG_ALPINE_UART0
+	default 0xfe010000 if STM32MP1_DEBUG_UART
 	default 0xfe017000 if DEBUG_MMP_UART2
 	default 0xfe018000 if DEBUG_MMP_UART3
 	default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
@@ -1823,7 +1853,7 @@ config DEBUG_UART_VIRT
 		DEBUG_S3C64XX_UART || \
 		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
 		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
-		DEBUG_AT91_UART
+		DEBUG_AT91_UART || DEBUG_STM32_UART
 
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e1d13d779e08..7d5cd0f85461 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -152,6 +152,7 @@ textofs-$(CONFIG_PM_H1940)      := 0x00108000
 ifeq ($(CONFIG_ARCH_SA1100),y)
 textofs-$(CONFIG_SA1111) := 0x00208000
 endif
+textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000
 textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
 textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
 textofs-$(CONFIG_ARCH_MESON) := 0x00208000
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 54f1a21de7e0..15cb35b4a57b 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -56,6 +56,8 @@ CONFIG_CPUFREQ_DT=m
 # CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
 CONFIG_ARM_TI_CPUFREQ=y
 CONFIG_CPU_IDLE=y
+CONFIG_ARM_CPUIDLE=y
+CONFIG_DT_IDLE_STATES=y
 CONFIG_KERNEL_MODE_NEON=y
 CONFIG_PM_DEBUG=y
 CONFIG_ARM_CRYPTO=y
diff --git a/arch/arm/include/debug/stm32.S b/arch/arm/include/debug/stm32.S
index 1abb32f685fd..f3c4a37210ed 100644
--- a/arch/arm/include/debug/stm32.S
+++ b/arch/arm/include/debug/stm32.S
@@ -4,14 +4,13 @@
  * Author:   Gerald Baeza <gerald.baeza@st.com> for STMicroelectronics.
  */
 
-#define STM32_UART_BASE			0x40011000	/* USART1 */
-
 #ifdef CONFIG_STM32F4_DEBUG_UART
 #define STM32_USART_SR_OFF		0x00
 #define STM32_USART_TDR_OFF		0x04
 #endif
 
-#ifdef CONFIG_STM32F7_DEBUG_UART
+#if defined(CONFIG_STM32F7_DEBUG_UART) || defined(CONFIG_STM32H7_DEBUG_UART) || \
+	defined(CONFIG_STM32MP1_DEBUG_UART)
 #define STM32_USART_SR_OFF		0x1C
 #define STM32_USART_TDR_OFF		0x28
 #endif
@@ -20,8 +19,8 @@
 #define STM32_USART_TXE			(1 << 7)	/* Tx data reg empty */
 
 .macro	addruart, rp, rv, tmp
-	ldr	\rp,      =STM32_UART_BASE	@ physical base
-	ldr	\rv,      =STM32_UART_BASE      @ virt base /* NoMMU */
+	ldr	\rp, =CONFIG_DEBUG_UART_PHYS @ physical base
+	ldr	\rv, =CONFIG_DEBUG_UART_VIRT @ virt base
 .endm
 
 .macro  senduart,rd,rx
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 7979420bd48b..ccd7e80ce943 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -153,7 +153,6 @@ config HAVE_AT91_USB_CLK
 
 config COMMON_CLK_AT91
 	bool
-	select COMMON_CLK
 	select MFD_SYSCON
 
 config HAVE_AT91_SMD
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 374b9d155558..074bde64064e 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -736,13 +736,36 @@ backup_default:
 
 struct pmc_info {
 	unsigned long uhp_udp_mask;
+	unsigned long mckr;
+	unsigned long version;
 };
 
 static const struct pmc_info pmc_infos[] __initconst = {
-	{ .uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP },
-	{ .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP },
-	{ .uhp_udp_mask = AT91SAM926x_PMC_UHP },
-	{ .uhp_udp_mask = 0 },
+	{
+		.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP,
+		.mckr = 0x30,
+		.version = AT91_PMC_V1,
+	},
+
+	{
+		.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
+		.mckr = 0x30,
+		.version = AT91_PMC_V1,
+	},
+	{
+		.uhp_udp_mask = AT91SAM926x_PMC_UHP,
+		.mckr = 0x30,
+		.version = AT91_PMC_V1,
+	},
+	{	.uhp_udp_mask = 0,
+		.mckr = 0x30,
+		.version = AT91_PMC_V1,
+	},
+	{
+		.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
+		.mckr = 0x28,
+		.version = AT91_PMC_V2,
+	},
 };
 
 static const struct of_device_id atmel_pmc_ids[] __initconst = {
@@ -757,7 +780,7 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = {
 	{ .compatible = "atmel,sama5d3-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
-	{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[1] },
+	{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] },
 	{ /* sentinel */ },
 };
 
@@ -779,6 +802,8 @@ static void __init at91_pm_init(void (*pm_idle)(void))
 
 	pmc = of_id->data;
 	soc_pm.data.uhp_udp_mask = pmc->uhp_udp_mask;
+	soc_pm.data.pmc_mckr_offset = pmc->mckr;
+	soc_pm.data.pmc_version = pmc->version;
 
 	if (pm_idle)
 		arm_pm_idle = pm_idle;
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 9fa4f483f2b5..218e8d1a30fb 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -33,6 +33,8 @@ struct at91_pm_data {
 	void __iomem *sfrbu;
 	unsigned int standby_mode;
 	unsigned int suspend_mode;
+	unsigned int pmc_mckr_offset;
+	unsigned int pmc_version;
 };
 #endif
 
diff --git a/arch/arm/mach-at91/pm_data-offsets.c b/arch/arm/mach-at91/pm_data-offsets.c
index f2d893c03cd9..82089ff258c0 100644
--- a/arch/arm/mach-at91/pm_data-offsets.c
+++ b/arch/arm/mach-at91/pm_data-offsets.c
@@ -12,6 +12,10 @@ int main(void)
 	DEFINE(PM_DATA_MODE,		offsetof(struct at91_pm_data, mode));
 	DEFINE(PM_DATA_SHDWC,		offsetof(struct at91_pm_data, shdwc));
 	DEFINE(PM_DATA_SFRBU,		offsetof(struct at91_pm_data, sfrbu));
+	DEFINE(PM_DATA_PMC_MCKR_OFFSET,	offsetof(struct at91_pm_data,
+						 pmc_mckr_offset));
+	DEFINE(PM_DATA_PMC_VERSION,	offsetof(struct at91_pm_data,
+						 pmc_version));
 
 	return 0;
 }
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index ed57c879d4e1..be9764e8d3fa 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -18,6 +18,7 @@
 pmc	.req	r0
 tmp1	.req	r4
 tmp2	.req	r5
+tmp3	.req	r6
 
 /*
  * Wait until master clock is ready (after switching master clock source)
@@ -93,13 +94,17 @@ ENTRY(at91_pm_suspend_in_sram)
 	str	tmp1, .memtype
 	ldr	tmp1, [r0, #PM_DATA_MODE]
 	str	tmp1, .pm_mode
+	ldr	tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
+	str	tmp1, .mckr_offset
+	ldr	tmp1, [r0, #PM_DATA_PMC_VERSION]
+	str	tmp1, .pmc_version
 	/* Both ldrne below are here to preload their address in the TLB */
 	ldr	tmp1, [r0, #PM_DATA_SHDWC]
 	str	tmp1, .shdwc
 	cmp	tmp1, #0
 	ldrne	tmp2, [tmp1, #0]
 	ldr	tmp1, [r0, #PM_DATA_SFRBU]
-	str	tmp1, .sfr
+	str	tmp1, .sfrbu
 	cmp	tmp1, #0
 	ldrne	tmp2, [tmp1, #0x10]
 
@@ -138,14 +143,15 @@ ENDPROC(at91_pm_suspend_in_sram)
 ENTRY(at91_backup_mode)
 	/* Switch the master clock source to slow clock. */
 	ldr	pmc, .pmc_base
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp2, .mckr_offset
+	ldr	tmp1, [pmc, tmp2]
 	bic	tmp1, tmp1, #AT91_PMC_CSS
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, [pmc, tmp2]
 
 	wait_mckrdy
 
 	/*BUMEN*/
-	ldr	r0, .sfr
+	ldr	r0, .sfrbu
 	mov	tmp1, #0x1
 	str	tmp1, [r0, #0x10]
 
@@ -218,6 +224,7 @@ ENDPROC(at91_backup_mode)
  */
 .macro at91_pm_ulp1_mode
 	ldr	pmc, .pmc_base
+	ldr	tmp2, .mckr_offset
 
 	/* Save RC oscillator state and check if it is enabled. */
 	ldr	tmp1, [pmc, #AT91_PMC_SR]
@@ -254,10 +261,10 @@ ENDPROC(at91_backup_mode)
 	str	tmp1, [pmc, #AT91_CKGR_MOR]
 
 	/* Switch the master clock source to main clock */
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp1, [pmc, tmp2]
 	bic	tmp1, tmp1, #AT91_PMC_CSS
 	orr	tmp1, tmp1, #AT91_PMC_CSS_MAIN
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, [pmc, tmp2]
 
 	wait_mckrdy
 
@@ -268,6 +275,10 @@ ENDPROC(at91_backup_mode)
 	orr	tmp1, tmp1, #AT91_PMC_KEY
 	str	tmp1, [pmc, #AT91_CKGR_MOR]
 
+	/* Quirk for SAM9X60's PMC */
+	nop
+	nop
+
 	wait_mckrdy
 
 	/* Enable the crystal oscillator */
@@ -280,9 +291,9 @@ ENDPROC(at91_backup_mode)
 	wait_moscrdy
 
 	/* Switch the master clock source to slow clock */
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp1, [pmc, tmp2]
 	bic	tmp1, tmp1, #AT91_PMC_CSS
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, [pmc, tmp2]
 
 	wait_mckrdy
 
@@ -296,10 +307,10 @@ ENDPROC(at91_backup_mode)
 	wait_moscsels
 
 	/* Switch the master clock source to main clock */
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp1, [pmc, tmp2]
 	bic	tmp1, tmp1, #AT91_PMC_CSS
 	orr	tmp1, tmp1, #AT91_PMC_CSS_MAIN
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, [pmc, tmp2]
 
 	wait_mckrdy
 
@@ -323,21 +334,160 @@ ENDPROC(at91_backup_mode)
 3:
 .endm
 
+.macro at91_plla_disable
+	/* Save PLLA setting and disable it */
+	ldr	tmp1, .pmc_version
+	cmp	tmp1, #AT91_PMC_V1
+	beq	1f
+
+#ifdef CONFIG_SOC_SAM9X60
+	/* Save PLLA settings. */
+	ldr	tmp2, [pmc, #AT91_PMC_PLL_UPDT]
+	bic	tmp2, tmp2, #AT91_PMC_PLL_UPDT_ID
+	str	tmp2, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* save div. */
+	mov	tmp1, #0
+	ldr	tmp2, [pmc, #AT91_PMC_PLL_CTRL0]
+	bic	tmp2, tmp2, #0xffffff00
+	orr	tmp1, tmp1, tmp2
+
+	/* save mul. */
+	ldr	tmp2, [pmc, #AT91_PMC_PLL_CTRL1]
+	bic	tmp2, tmp2, #0xffffff
+	orr	tmp1, tmp1, tmp2
+	str	tmp1, .saved_pllar
+
+	/* step 2. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* step 3. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+	bic	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLLCK
+	orr	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL
+	str	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+
+	/* step 4. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	orr	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* step 5. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+	bic	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL
+	str	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+
+	/* step 7. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	orr	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	b	2f
+#endif
+
+1:	/* Save PLLA setting and disable it */
+	ldr	tmp1, [pmc, #AT91_CKGR_PLLAR]
+	str	tmp1, .saved_pllar
+
+	/* Disable PLLA. */
+	mov	tmp1, #AT91_PMC_PLLCOUNT
+	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
+	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
+2:
+.endm
+
+.macro at91_plla_enable
+	ldr	tmp2, .saved_pllar
+	ldr	tmp3, .pmc_version
+	cmp	tmp3, #AT91_PMC_V1
+	beq	4f
+
+#ifdef CONFIG_SOC_SAM9X60
+	/* step 1. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* step 2. */
+	ldr	tmp1, =#AT91_PMC_PLL_ACR_DEFAULT_PLLA
+	str	tmp1, [pmc, #AT91_PMC_PLL_ACR]
+
+	/* step 3. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_CTRL1]
+	mov	tmp3, tmp2
+	bic	tmp3, tmp3, #0xffffff
+	orr	tmp1, tmp1, tmp3
+	str	tmp1, [pmc, #AT91_PMC_PLL_CTRL1]
+
+	/* step 8. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	orr	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* step 9. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+	orr	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENLOCK
+	orr	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL
+	orr	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLLCK
+	bic	tmp1, tmp1, #0xff
+	mov	tmp3, tmp2
+	bic	tmp3, tmp3, #0xffffff00
+	orr	tmp1, tmp1, tmp3
+	str	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+
+	/* step 10. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	orr	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* step 11. */
+3:	ldr	tmp1, [pmc, #AT91_PMC_PLL_ISR0]
+	tst	tmp1, #0x1
+	beq	3b
+	b	2f
+#endif
+
+	/* Restore PLLA setting */
+4:	str	tmp2, [pmc, #AT91_CKGR_PLLAR]
+
+	/* Enable PLLA. */
+	tst	tmp2, #(AT91_PMC_MUL &  0xff0000)
+	bne	1f
+	tst	tmp2, #(AT91_PMC_MUL & ~0xff0000)
+	beq	2f
+
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_LOCKA
+	beq	1b
+2:
+.endm
+
 ENTRY(at91_ulp_mode)
 	ldr	pmc, .pmc_base
+	ldr	tmp2, .mckr_offset
 
 	/* Save Master clock setting */
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp1, [pmc, tmp2]
 	str	tmp1, .saved_mckr
 
 	/*
 	 * Set the Master clock source to slow clock
 	 */
 	bic	tmp1, tmp1, #AT91_PMC_CSS
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, [pmc, tmp2]
 
 	wait_mckrdy
 
+	at91_plla_disable
+
 	ldr	r0, .pm_mode
 	cmp	r0, #AT91_PM_ULP1
 	beq	ulp1_mode
@@ -352,11 +502,14 @@ ulp1_mode:
 ulp_exit:
 	ldr	pmc, .pmc_base
 
+	at91_plla_enable
+
 	/*
 	 * Restore master clock setting
 	 */
-	ldr	tmp1, .saved_mckr
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp1, .mckr_offset
+	ldr	tmp2, .saved_mckr
+	str	tmp2, [pmc, tmp1]
 
 	wait_mckrdy
 
@@ -496,14 +649,20 @@ ENDPROC(at91_sramc_self_refresh)
 	.word 0
 .shdwc:
 	.word 0
-.sfr:
+.sfrbu:
 	.word 0
 .memtype:
 	.word 0
 .pm_mode:
 	.word 0
+.mckr_offset:
+	.word 0
+.pmc_version:
+	.word 0
 .saved_mckr:
 	.word 0
+.saved_pllar:
+	.word 0
 .saved_sam9_lpr:
 	.word 0
 .saved_sam9_lpr1:
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index fcfe2a0e8058..6aa938b949db 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -20,7 +20,6 @@ config ARCH_BCM_IPROC
 	select GPIOLIB
 	select ARM_AMBA
 	select PINCTRL
-	select PCI_DOMAINS_GENERIC if PCI
 	help
 	  This enables support for systems based on Broadcom IPROC architected SoCs.
 	  The IPROC complex contains one or more ARM CPUs along with common
@@ -54,7 +53,6 @@ config ARCH_BCM_NSP
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
 	select ARM_ERRATA_764369 if SMP
-	select HAVE_SMP
 	select THERMAL
 	select THERMAL_OF
 	help
@@ -73,7 +71,6 @@ config ARCH_BCM_5301X
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
 	select ARM_ERRATA_764369 if SMP
-	select HAVE_SMP
 
 	help
 	  Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
@@ -109,7 +106,6 @@ config ARCH_BCM_281XX
 	bool "Broadcom BCM281XX SoC family"
 	depends on ARCH_MULTI_V7
 	select ARCH_BCM_MOBILE
-	select HAVE_SMP
 	help
 	  Enable support for the BCM281XX family, which includes
 	  BCM11130, BCM11140, BCM11351, BCM28145 and BCM28155
@@ -119,7 +115,6 @@ config ARCH_BCM_21664
 	bool "Broadcom BCM21664 SoC family"
 	depends on ARCH_MULTI_V7
 	select ARCH_BCM_MOBILE
-	select HAVE_SMP
 	help
 	  Enable support for the BCM21664 family, which includes
 	  BCM21663 and BCM21664 variants.
@@ -128,7 +123,6 @@ config ARCH_BCM_23550
 	bool "Broadcom BCM23550 SoC"
 	depends on ARCH_MULTI_V7
 	select ARCH_BCM_MOBILE
-	select HAVE_SMP
 	help
 	  Enable support for the BCM23550.
 
@@ -165,7 +159,6 @@ config ARCH_BCM2835
 	select ZONE_DMA if ARCH_MULTI_V7
 	select ARM_TIMER_SP804
 	select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
-	select TIMER_OF
 	select BCM2835_TIMER
 	select PINCTRL
 	select PINCTRL_BCM2835
@@ -201,7 +194,6 @@ config ARCH_BCM_63XX
 	select HAVE_ARM_ARCH_TIMER
 	select HAVE_ARM_TWD if SMP
 	select HAVE_ARM_SCU if SMP
-	select HAVE_SMP
 	help
 	  This enables support for systems based on Broadcom DSL SoCs.
 	  It currently supports the 'BCM63XX' ARM-based family, which includes
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index 1d61a7701c11..e4f4b20b83a2 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -189,12 +189,6 @@ static irqreturn_t cns3xxx_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction cns3xxx_timer_irq = {
-	.name		= "timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= cns3xxx_timer_interrupt,
-};
-
 /*
  * Set up the clock source and clock events devices
  */
@@ -245,7 +239,9 @@ static void __init __cns3xxx_timer_init(unsigned int timer_irq)
 	writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
 
 	/* Make irqs happen for the system timer */
-	setup_irq(timer_irq, &cns3xxx_timer_irq);
+	if (request_irq(timer_irq, cns3xxx_timer_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "timer", NULL))
+		pr_err("Failed to request irq %d (timer)\n", timer_irq);
 
 	cns3xxx_clockevents_init(timer_irq);
 }
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 01b830afcea9..dbe970e37895 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -48,7 +48,7 @@
 /*****************************************************************************
  * I/O Address Mapping
  ****************************************************************************/
-static struct map_desc dove_io_desc[] __initdata = {
+static struct map_desc __maybe_unused dove_io_desc[] __initdata = {
 	{
 		.virtual	= (unsigned long) DOVE_SB_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE),
diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c
index de998830f534..dd4b164d1831 100644
--- a/arch/arm/mach-ep93xx/timer-ep93xx.c
+++ b/arch/arm/mach-ep93xx/timer-ep93xx.c
@@ -117,15 +117,11 @@ static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction ep93xx_timer_irq = {
-	.name		= "ep93xx timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= ep93xx_timer_interrupt,
-	.dev_id		= &ep93xx_clockevent,
-};
-
 void __init ep93xx_timer_init(void)
 {
+	int irq = IRQ_EP93XX_TIMER3;
+	unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL;
+
 	/* Enable and register clocksource and sched_clock on timer 4 */
 	writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
 	       EP93XX_TIMER4_VALUE_HIGH);
@@ -136,7 +132,9 @@ void __init ep93xx_timer_init(void)
 			     EP93XX_TIMER4_RATE);
 
 	/* Set up clockevent on timer 3 */
-	setup_irq(IRQ_EP93XX_TIMER3, &ep93xx_timer_irq);
+	if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer",
+			&ep93xx_clockevent))
+		pr_err("Failed to request irq %d (ep93xx timer)\n", irq);
 	clockevents_config_and_register(&ep93xx_clockevent,
 					EP93XX_TIMER123_RATE,
 					1,
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 95584ee02b55..e7d7b90e2cf8 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -471,8 +471,6 @@ config	SOC_IMX53
 config SOC_IMX6
 	bool
 	select ARM_CPU_SUSPEND if (PM || CPU_IDLE)
-	select ARM_ERRATA_754322
-	select ARM_ERRATA_775420
 	select ARM_GIC
 	select HAVE_IMX_ANATOP
 	select HAVE_IMX_GPC
@@ -484,6 +482,8 @@ config SOC_IMX6
 config SOC_IMX6Q
 	bool "i.MX6 Quad/DualLite support"
 	select ARM_ERRATA_764369 if SMP
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_775420
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD
 	select PINCTRL_IMX6Q
@@ -494,6 +494,8 @@ config SOC_IMX6Q
 
 config SOC_IMX6SL
 	bool "i.MX6 SoloLite support"
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_775420
 	select PINCTRL_IMX6SL
 	select SOC_IMX6
 
@@ -502,6 +504,8 @@ config SOC_IMX6SL
 
 config SOC_IMX6SLL
 	bool "i.MX6 SoloLiteLite support"
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_775420
 	select PINCTRL_IMX6SLL
 	select SOC_IMX6
 
@@ -510,6 +514,8 @@ config SOC_IMX6SLL
 
 config SOC_IMX6SX
 	bool "i.MX6 SoloX support"
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_775420
 	select PINCTRL_IMX6SX
 	select SOC_IMX6
 
diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
index 8fb68c0ec34c..d841bed8664d 100644
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@@ -89,12 +89,11 @@ void imx_anatop_post_resume(void)
 
 	if (cpu_is_imx6sl())
 		imx_anatop_disconnect_high_snvs(false);
-
 }
 
 void __init imx_init_revision_from_anatop(void)
 {
-	struct device_node *np;
+	struct device_node *np, *src_np;
 	void __iomem *anatop_base;
 	unsigned int revision;
 	u32 digprog;
@@ -135,9 +134,10 @@ void __init imx_init_revision_from_anatop(void)
 			void __iomem *src_base;
 			u32 sbmr2;
 
-			np = of_find_compatible_node(NULL, NULL,
+			src_np = of_find_compatible_node(NULL, NULL,
 						     "fsl,imx6ul-src");
 			src_base = of_iomap(np, 0);
+			of_node_put(src_np);
 			WARN_ON(!src_base);
 			sbmr2 = readl_relaxed(src_base + SRC_SBMR2);
 			iounmap(src_base);
@@ -149,6 +149,7 @@ void __init imx_init_revision_from_anatop(void)
 			}
 		}
 	}
+	of_node_put(np);
 
 	mxc_set_cpu_type(digprog >> 16 & 0xff);
 	imx_set_soc_revision(revision);
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index b5b557fe2c49..ebc4339b8be4 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -10,7 +10,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
-#include <linux/irqchip/arm-gic.h>
+
 #include "common.h"
 #include "hardware.h"
 
@@ -111,7 +111,6 @@ void imx_gpc_mask_all(void)
 		gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
 		writel_relaxed(~0, reg_imr1 + i * 4);
 	}
-
 }
 
 void imx_gpc_restore_all(void)
@@ -282,4 +281,5 @@ void __init imx_gpc_check_dt(void)
 		/* map GPC, so that at least CPUidle and WARs keep working */
 		gpc_base = of_iomap(np, 0);
 	}
+	of_node_put(np);
 }
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index edd26e0ffeec..284bce1112d2 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -5,29 +5,16 @@
  */
 
 #include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/cpu.h>
-#include <linux/delay.h>
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
 #include <linux/irqchip.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/pm_opp.h>
 #include <linux/pci.h>
 #include <linux/phy.h>
-#include <linux/reboot.h>
 #include <linux/regmap.h>
 #include <linux/micrel_phy.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/system_misc.h>
 
 #include "common.h"
 #include "cpuidle.h"
diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c
index e00818abe54d..e27a6889cc56 100644
--- a/arch/arm/mach-imx/mach-imx6sl.c
+++ b/arch/arm/mach-imx/mach-imx6sl.c
@@ -4,7 +4,6 @@
  */
 
 #include <linux/irqchip.h>
-#include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c
index 311f5e4ff723..3b0e16ccd59d 100644
--- a/arch/arm/mach-imx/mach-imx6ul.c
+++ b/arch/arm/mach-imx/mach-imx6ul.c
@@ -25,7 +25,6 @@ static void __init imx6ul_enet_clk_init(void)
 				   IMX6UL_GPR1_ENET_CLK_OUTPUT);
 	else
 		pr_err("failed to find fsl,imx6ul-iomux-gpr regmap\n");
-
 }
 
 static int ksz8081_phy_fixup(struct phy_device *dev)
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 2aa26928221d..cf4e9335831c 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -109,6 +109,7 @@ static void __init ls1021a_smp_prepare_cpus(unsigned int max_cpus)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,ls1021a-dcfg");
 	dcfg_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!dcfg_base);
 
 	paddr = __pa_symbol(secondary_startup);
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index 1c0ecad3620e..dd34dff13762 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -655,6 +655,8 @@ void __init imx6_pm_ccm_init(const char *ccm_compat)
 
 	if (of_property_read_bool(np, "fsl,pmic-stby-poweroff"))
 		imx6_pm_stby_poweroff_probe();
+
+	of_node_put(np);
 }
 
 void __init imx6q_pm_init(void)
diff --git a/arch/arm/mach-imx/pm-imx7ulp.c b/arch/arm/mach-imx/pm-imx7ulp.c
index 7b2f7387e662..2e756d8191fa 100644
--- a/arch/arm/mach-imx/pm-imx7ulp.c
+++ b/arch/arm/mach-imx/pm-imx7ulp.c
@@ -62,6 +62,7 @@ void __init imx7ulp_pm_init(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx7ulp-smc1");
 	smc1_base = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!smc1_base);
 
 	imx7ulp_set_lpm(ULP_PM_RUN);
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index 0beea6d0217f..f52f371292ac 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -43,9 +43,6 @@ static int imx_src_reset_module(struct reset_controller_dev *rcdev,
 	int bit;
 	u32 val;
 
-	if (!src_base)
-		return -ENODEV;
-
 	if (sw_reset_idx >= ARRAY_SIZE(sw_reset_bits))
 		return -EINVAL;
 
diff --git a/arch/arm/mach-iop32x/time.c b/arch/arm/mach-iop32x/time.c
index 18a4df5c1baa..ae533b66fefd 100644
--- a/arch/arm/mach-iop32x/time.c
+++ b/arch/arm/mach-iop32x/time.c
@@ -137,13 +137,6 @@ iop_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction iop_timer_irq = {
-	.name		= "IOP Timer Tick",
-	.handler	= iop_timer_interrupt,
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.dev_id		= &iop_clockevent,
-};
-
 static unsigned long iop_tick_rate;
 unsigned long get_iop_tick_rate(void)
 {
@@ -154,6 +147,7 @@ EXPORT_SYMBOL(get_iop_tick_rate);
 void __init iop_init_time(unsigned long tick_rate)
 {
 	u32 timer_ctl;
+	int irq = IRQ_IOP32X_TIMER0;
 
 	sched_clock_register(iop_read_sched_clock, 32, tick_rate);
 
@@ -168,7 +162,9 @@ void __init iop_init_time(unsigned long tick_rate)
 	 */
 	write_tmr0(timer_ctl & ~IOP_TMR_EN);
 	write_tisr(1);
-	setup_irq(IRQ_IOP32X_TIMER0, &iop_timer_irq);
+	if (request_irq(irq, iop_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			"IOP Timer Tick", &iop_clockevent))
+		pr_err("Failed to request irq() %d (IOP Timer Tick)\n", irq);
 	iop_clockevent.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&iop_clockevent, tick_rate,
 					0xf, 0xfffffffe);
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index c65cfc1ad99b..049a65f47b42 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -175,13 +175,6 @@ static void __init timer_config(void)
 	__raw_writel(0x2, mmp_timer_base + TMR_CER);
 }
 
-static struct irqaction timer_irq = {
-	.name		= "timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= timer_interrupt,
-	.dev_id		= &ckevt,
-};
-
 void __init mmp_timer_init(int irq, unsigned long rate)
 {
 	timer_config();
@@ -190,7 +183,9 @@ void __init mmp_timer_init(int irq, unsigned long rate)
 
 	ckevt.cpumask = cpumask_of(0);
 
-	setup_irq(irq, &timer_irq);
+	if (request_irq(irq, timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			"timer", &ckevt))
+		pr_err("Failed to request irq %d (timer)\n", irq);
 
 	clocksource_register_hz(&cksrc, rate);
 	clockevents_config_and_register(&ckevt, rate, MIN_DELTA, MAX_DELTA);
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index d068958d6f8a..2c1e2b32b9b3 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -596,11 +596,6 @@ static irqreturn_t omap_wakeup_interrupt(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction omap_wakeup_irq = {
-	.name		= "peripheral wakeup",
-	.handler	= omap_wakeup_interrupt
-};
-
 
 
 static const struct platform_suspend_ops omap_pm_ops = {
@@ -613,6 +608,7 @@ static const struct platform_suspend_ops omap_pm_ops = {
 static int __init omap_pm_init(void)
 {
 	int error = 0;
+	int irq;
 
 	if (!cpu_class_is_omap1())
 		return -ENODEV;
@@ -656,9 +652,12 @@ static int __init omap_pm_init(void)
 	arm_pm_idle = omap1_pm_idle;
 
 	if (cpu_is_omap7xx())
-		setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
+		irq = INT_7XX_WAKE_UP_REQ;
 	else if (cpu_is_omap16xx())
-		setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
+		irq = INT_1610_WAKE_UP_REQ;
+	if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup",
+			NULL))
+		pr_err("Failed to request irq %d (peripheral wakeup)\n", irq);
 
 	/* Program new power ramp-up time
 	 * (0 for most boards since we don't lower voltage when in deep sleep)
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 524977a31a49..de590a85a42b 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -155,15 +155,11 @@ static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction omap_mpu_timer1_irq = {
-	.name		= "mpu_timer1",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= omap_mpu_timer1_interrupt,
-};
-
 static __init void omap_init_mpu_timer(unsigned long rate)
 {
-	setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
+	if (request_irq(INT_TIMER1, omap_mpu_timer1_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "mpu_timer1", NULL))
+		pr_err("Failed to request irq %d (mpu_timer1)\n", INT_TIMER1);
 	omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
 
 	clockevent_mpu_timer1.cpumask = cpumask_of(0);
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 0ae6c52a7d70..780fdf03c3ce 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -148,15 +148,11 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction omap_32k_timer_irq = {
-	.name		= "32KHz timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= omap_32k_timer_interrupt,
-};
-
 static __init void omap_init_32k_timer(void)
 {
-	setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
+	if (request_irq(INT_OS_TIMER, omap_32k_timer_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "32KHz timer", NULL))
+		pr_err("Failed to request irq %d(32KHz timer)\n", INT_OS_TIMER);
 
 	clockevent_32k_timer.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&clockevent_32k_timer,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 17d337ed18be..82706af307de 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -3148,15 +3148,14 @@ static int omap_hwmod_check_sysc(struct device *dev,
 /**
  * omap_hwmod_init_regbits - init sysconfig specific register bits
  * @dev: struct device
+ * @oh: module
  * @data: module data
  * @sysc_fields: new sysc configuration
  */
-static int omap_hwmod_init_regbits(struct device *dev,
+static int omap_hwmod_init_regbits(struct device *dev, struct omap_hwmod *oh,
 				   const struct ti_sysc_module_data *data,
 				   struct sysc_regbits **sysc_fields)
 {
-	*sysc_fields = NULL;
-
 	switch (data->cap->type) {
 	case TI_SYSC_OMAP2:
 	case TI_SYSC_OMAP2_TIMER:
@@ -3191,6 +3190,12 @@ static int omap_hwmod_init_regbits(struct device *dev,
 		*sysc_fields = &omap_hwmod_sysc_type_usb_host_fs;
 		break;
 	default:
+		*sysc_fields = NULL;
+		if (!oh->class->sysc->sysc_fields)
+			return 0;
+
+		dev_err(dev, "sysc_fields not found\n");
+
 		return -EINVAL;
 	}
 
@@ -3356,9 +3361,9 @@ static int omap_hwmod_check_module(struct device *dev,
 	if (!oh->class->sysc)
 		return -ENODEV;
 
-	if (sysc_fields != oh->class->sysc->sysc_fields)
-		dev_warn(dev, "sysc_fields %p != %p\n", sysc_fields,
-			 oh->class->sysc->sysc_fields);
+	if (oh->class->sysc->sysc_fields &&
+	    sysc_fields != oh->class->sysc->sysc_fields)
+		dev_warn(dev, "sysc_fields mismatch\n");
 
 	if (rev_offs != oh->class->sysc->rev_offs)
 		dev_warn(dev, "rev_offs %08x != %08x\n", rev_offs,
@@ -3574,7 +3579,7 @@ int omap_hwmod_init_module(struct device *dev,
 
 	cookie->data = oh;
 
-	error = omap_hwmod_init_regbits(dev, data, &sysc_fields);
+	error = omap_hwmod_init_regbits(dev, oh, data, &sysc_fields);
 	if (error)
 		return error;
 
diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c
index 7461b0346549..5455fc98c60e 100644
--- a/arch/arm/mach-omap2/pm33xx-core.c
+++ b/arch/arm/mach-omap2/pm33xx-core.c
@@ -6,11 +6,14 @@
  *	Dave Gerlach
  */
 
+#include <linux/cpuidle.h>
+#include <linux/platform_data/pm33xx.h>
+#include <asm/cpuidle.h>
 #include <asm/smp_scu.h>
 #include <asm/suspend.h>
 #include <linux/errno.h>
-#include <linux/platform_data/pm33xx.h>
 #include <linux/clk.h>
+#include <linux/cpu.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/pinctrl/pinmux.h>
 #include <linux/wkup_m3_ipc.h>
@@ -35,6 +38,14 @@ static struct clockdomain *gfx_l4ls_clkdm;
 static void __iomem *scu_base;
 static struct omap_hwmod *rtc_oh;
 
+static int (*idle_fn)(u32 wfi_flags);
+
+struct amx3_idle_state {
+	int wfi_flags;
+};
+
+static struct amx3_idle_state *idle_states;
+
 static int am43xx_map_scu(void)
 {
 	scu_base = ioremap(scu_a9_get_base(), SZ_256);
@@ -68,7 +79,7 @@ static int am43xx_check_off_mode_enable(void)
 	return 0;
 }
 
-static int amx3_common_init(void)
+static int amx3_common_init(int (*idle)(u32 wfi_flags))
 {
 	gfx_pwrdm = pwrdm_lookup("gfx_pwrdm");
 	per_pwrdm = pwrdm_lookup("per_pwrdm");
@@ -88,10 +99,12 @@ static int amx3_common_init(void)
 	else
 		omap_set_pwrdm_state(cefuse_pwrdm, PWRDM_POWER_OFF);
 
+	idle_fn = idle;
+
 	return 0;
 }
 
-static int am33xx_suspend_init(void)
+static int am33xx_suspend_init(int (*idle)(u32 wfi_flags))
 {
 	int ret;
 
@@ -102,12 +115,12 @@ static int am33xx_suspend_init(void)
 		return -ENODEV;
 	}
 
-	ret = amx3_common_init();
+	ret = amx3_common_init(idle);
 
 	return ret;
 }
 
-static int am43xx_suspend_init(void)
+static int am43xx_suspend_init(int (*idle)(u32 wfi_flags))
 {
 	int ret = 0;
 
@@ -117,11 +130,17 @@ static int am43xx_suspend_init(void)
 		return ret;
 	}
 
-	ret = amx3_common_init();
+	ret = amx3_common_init(idle);
 
 	return ret;
 }
 
+static int amx3_suspend_deinit(void)
+{
+	idle_fn = NULL;
+	return 0;
+}
+
 static void amx3_pre_suspend_common(void)
 {
 	omap_set_pwrdm_state(gfx_pwrdm, PWRDM_POWER_OFF);
@@ -201,6 +220,43 @@ static int am43xx_suspend(unsigned int state, int (*fn)(unsigned long),
 	return ret;
 }
 
+static int am33xx_cpu_suspend(int (*fn)(unsigned long), unsigned long args)
+{
+	int ret = 0;
+
+	if (omap_irq_pending() || need_resched())
+		return ret;
+
+	ret = cpu_suspend(args, fn);
+
+	return ret;
+}
+
+static int am43xx_cpu_suspend(int (*fn)(unsigned long), unsigned long args)
+{
+	int ret = 0;
+
+	if (!scu_base)
+		return 0;
+
+	scu_power_mode(scu_base, SCU_PM_DORMANT);
+	ret = cpu_suspend(args, fn);
+	scu_power_mode(scu_base, SCU_PM_NORMAL);
+
+	return ret;
+}
+
+static void amx3_begin_suspend(void)
+{
+	cpu_idle_poll_ctrl(true);
+}
+
+static void amx3_finish_suspend(void)
+{
+	cpu_idle_poll_ctrl(false);
+}
+
+
 static struct am33xx_pm_sram_addr *amx3_get_sram_addrs(void)
 {
 	if (soc_is_am33xx())
@@ -253,7 +309,11 @@ static void am43xx_prepare_rtc_resume(void)
 
 static struct am33xx_pm_platform_data am33xx_ops = {
 	.init = am33xx_suspend_init,
+	.deinit = amx3_suspend_deinit,
 	.soc_suspend = am33xx_suspend,
+	.cpu_suspend = am33xx_cpu_suspend,
+	.begin_suspend = amx3_begin_suspend,
+	.finish_suspend = amx3_finish_suspend,
 	.get_sram_addrs = amx3_get_sram_addrs,
 	.save_context = am33xx_save_context,
 	.restore_context = am33xx_restore_context,
@@ -265,7 +325,11 @@ static struct am33xx_pm_platform_data am33xx_ops = {
 
 static struct am33xx_pm_platform_data am43xx_ops = {
 	.init = am43xx_suspend_init,
+	.deinit = amx3_suspend_deinit,
 	.soc_suspend = am43xx_suspend,
+	.cpu_suspend = am43xx_cpu_suspend,
+	.begin_suspend = amx3_begin_suspend,
+	.finish_suspend = amx3_finish_suspend,
 	.get_sram_addrs = amx3_get_sram_addrs,
 	.save_context = am43xx_save_context,
 	.restore_context = am43xx_restore_context,
@@ -301,3 +365,64 @@ int __init amx3_common_pm_init(void)
 
 	return 0;
 }
+
+static int __init amx3_idle_init(struct device_node *cpu_node, int cpu)
+{
+	struct device_node *state_node;
+	struct amx3_idle_state states[CPUIDLE_STATE_MAX];
+	int i;
+	int state_count = 1;
+
+	for (i = 0; ; i++) {
+		state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
+		if (!state_node)
+			break;
+
+		if (!of_device_is_available(state_node))
+			continue;
+
+		if (i == CPUIDLE_STATE_MAX) {
+			pr_warn("%s: cpuidle states reached max possible\n",
+				__func__);
+			break;
+		}
+
+		states[state_count].wfi_flags = 0;
+
+		if (of_property_read_bool(state_node, "ti,idle-wkup-m3"))
+			states[state_count].wfi_flags |= WFI_FLAG_WAKE_M3 |
+							 WFI_FLAG_FLUSH_CACHE;
+
+		state_count++;
+	}
+
+	idle_states = kcalloc(state_count, sizeof(*idle_states), GFP_KERNEL);
+	if (!idle_states)
+		return -ENOMEM;
+
+	for (i = 1; i < state_count; i++)
+		idle_states[i].wfi_flags = states[i].wfi_flags;
+
+	return 0;
+}
+
+static int amx3_idle_enter(unsigned long index)
+{
+	struct amx3_idle_state *idle_state = &idle_states[index];
+
+	if (!idle_state)
+		return -EINVAL;
+
+	if (idle_fn)
+		idle_fn(idle_state->wfi_flags);
+
+	return 0;
+}
+
+static struct cpuidle_ops amx3_cpuidle_ops __initdata = {
+	.init = amx3_idle_init,
+	.suspend = amx3_idle_enter,
+};
+
+CPUIDLE_METHOD_OF_DECLARE(pm33xx_idle, "ti,am3352", &amx3_cpuidle_ops);
+CPUIDLE_METHOD_OF_DECLARE(pm43xx_idle, "ti,am4372", &amx3_cpuidle_ops);
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 0d0a731cb476..8b09cdacc30d 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -91,12 +91,6 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction omap2_gp_timer_irq = {
-	.name		= "gp_timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= omap2_gp_timer_interrupt,
-};
-
 static int omap2_gp_timer_set_next_event(unsigned long cycles,
 					 struct clock_event_device *evt)
 {
@@ -382,8 +376,9 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
 				     &clockevent_gpt.name, OMAP_TIMER_POSTED);
 	BUG_ON(res);
 
-	omap2_gp_timer_irq.dev_id = &clkev;
-	setup_irq(clkev.irq, &omap2_gp_timer_irq);
+	if (request_irq(clkev.irq, omap2_gp_timer_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "gp_timer", &clkev))
+		pr_err("Failed to request irq %d (gp_timer)\n", clkev.irq);
 
 	__omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
 
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index cf9cb3d2590e..e94a61901ffd 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -3,7 +3,6 @@ menuconfig ARCH_ORION5X
 	bool "Marvell Orion"
 	depends on MMU && ARCH_MULTI_V5
 	select CPU_FEROCEON
-	select GENERIC_CLOCKEVENTS
 	select GPIOLIB
 	select MVEBU_MBUS
 	select FORCE_PCI
@@ -18,7 +17,6 @@ if ARCH_ORION5X
 
 config ARCH_ORION5X_DT
 	bool "Marvell Orion5x Flattened Device Tree"
-	select USE_OF
 	select ORION_CLK
 	select ORION_IRQCHIP
 	select ORION_TIMER
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index fda9b75c3a33..a39764faf2a0 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -398,7 +398,6 @@ static int ts78xx_fpga_load_devices(void)
 
 static int ts78xx_fpga_unload_devices(void)
 {
-	int ret = 0;
 
 	if (ts78xx_fpga.supports.ts_rtc.present == 1)
 		ts78xx_ts_rtc_unload();
@@ -407,7 +406,7 @@ static int ts78xx_fpga_unload_devices(void)
 	if (ts78xx_fpga.supports.ts_rng.present == 1)
 		ts78xx_ts_rng_unload();
 
-	return ret;
+	return 0;
 }
 
 static int ts78xx_fpga_load(void)
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
index ecbf3c4eb878..1772eccb5caf 100644
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -12,6 +12,11 @@ menuconfig ARCH_QCOM
 
 if ARCH_QCOM
 
+config ARCH_IPQ40XX
+	bool "Enable support for IPQ40XX"
+	select CLKSRC_QCOM
+	select HAVE_ARM_ARCH_TIMER
+
 config ARCH_MSM8X60
 	bool "Enable support for MSM8X60"
 	select CLKSRC_QCOM
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index b13ec9088ce5..86406e3f9b22 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -72,7 +72,6 @@ static const char *const r8a7779_compat_dt[] __initconst = {
 DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)")
 	.smp		= smp_ops(r8a7779_smp_ops),
 	.map_io		= r8a7779_map_io,
-	.init_early	= shmobile_init_delay,
 	.init_irq	= r8a7779_init_irq_dt,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= r8a7779_compat_dt,
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 2fd3aa6f3212..1ee5cd2840e0 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -7,7 +7,6 @@
  * Copyright (C) 2014  Ulrich Hecht
  */
 
-#include <linux/clk-provider.h>
 #include <linux/clocksource.h>
 #include <linux/device.h>
 #include <linux/dma-contiguous.h>
@@ -15,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/memblock.h>
 #include <linux/of.h>
+#include <linux/of_clk.h>
 #include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 #include <linux/psci.h>
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index cc08aa752244..eb4a62fa4289 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -56,7 +56,6 @@ static const char *const sh73a0_boards_compat_dt[] __initconst = {
 DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
 	.smp		= smp_ops(sh73a0_smp_ops),
 	.map_io		= sh73a0_map_io,
-	.init_early	= shmobile_init_delay,
 	.init_machine	= sh73a0_generic_init,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= sh73a0_boards_compat_dt,
diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c
index 289e036c9c30..d1fdb6066f7b 100644
--- a/arch/arm/mach-spear/time.c
+++ b/arch/arm/mach-spear/time.c
@@ -181,12 +181,6 @@ static irqreturn_t spear_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction spear_timer_irq = {
-	.name = "timer",
-	.flags = IRQF_TIMER,
-	.handler = spear_timer_interrupt
-};
-
 static void __init spear_clockevent_init(int irq)
 {
 	u32 tick_rate;
@@ -201,7 +195,8 @@ static void __init spear_clockevent_init(int irq)
 
 	clockevents_config_and_register(&clkevt, tick_rate, 3, 0xfff0);
 
-	setup_irq(irq, &spear_timer_irq);
+	if (request_irq(irq, spear_timer_interrupt, IRQF_TIMER, "timer", NULL))
+		pr_err("Failed to request irq %d (timer)\n", irq);
 }
 
 static const struct of_device_id timer_of_match[] __initconst = {
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 933b6930f024..06da2747a90b 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -10,9 +10,9 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/clk-provider.h>
 #include <linux/clocksource.h>
 #include <linux/init.h>
+#include <linux/of_clk.h>
 #include <linux/platform_device.h>
 #include <linux/reset/sunxi.h>
 
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 6c1dff2eccc2..07572b5373b8 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -8,29 +8,14 @@ obj-y					+= reset.o
 obj-y					+= reset-handler.o
 obj-y					+= sleep.o
 obj-y					+= tegra.o
-obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= sleep-tegra20.o
+obj-y					+= sleep-tegra20.o
+obj-y					+= sleep-tegra30.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= pm-tegra20.o
-ifeq ($(CONFIG_CPU_IDLE),y)
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= cpuidle-tegra20.o
-endif
-obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= sleep-tegra30.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= pm-tegra30.o
-ifeq ($(CONFIG_CPU_IDLE),y)
-obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= cpuidle-tegra30.o
-endif
 obj-$(CONFIG_SMP)			+= platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
 
-obj-$(CONFIG_ARCH_TEGRA_114_SOC)	+= sleep-tegra30.o
 obj-$(CONFIG_ARCH_TEGRA_114_SOC)	+= pm-tegra30.o
-ifeq ($(CONFIG_CPU_IDLE),y)
-obj-$(CONFIG_ARCH_TEGRA_114_SOC)	+= cpuidle-tegra114.o
-endif
-obj-$(CONFIG_ARCH_TEGRA_124_SOC)	+= sleep-tegra30.o
 obj-$(CONFIG_ARCH_TEGRA_124_SOC)	+= pm-tegra30.o
-ifeq ($(CONFIG_CPU_IDLE),y)
-obj-$(CONFIG_ARCH_TEGRA_124_SOC)	+= cpuidle-tegra114.o
-endif
 
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= board-paz00.o
diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c
deleted file mode 100644
index 5118f777fd66..000000000000
--- a/arch/arm/mach-tegra/cpuidle-tegra114.c
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
- */
-
-#include <asm/firmware.h>
-#include <linux/tick.h>
-#include <linux/cpuidle.h>
-#include <linux/cpu_pm.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <linux/firmware/trusted_foundations.h>
-
-#include <asm/cpuidle.h>
-#include <asm/smp_plat.h>
-#include <asm/suspend.h>
-#include <asm/psci.h>
-
-#include "cpuidle.h"
-#include "pm.h"
-#include "sleep.h"
-
-#ifdef CONFIG_PM_SLEEP
-#define TEGRA114_MAX_STATES 2
-#else
-#define TEGRA114_MAX_STATES 1
-#endif
-
-#ifdef CONFIG_PM_SLEEP
-static int tegra114_idle_power_down(struct cpuidle_device *dev,
-				    struct cpuidle_driver *drv,
-				    int index)
-{
-	local_fiq_disable();
-
-	tegra_set_cpu_in_lp2();
-	cpu_pm_enter();
-
-	call_firmware_op(prepare_idle, TF_PM_MODE_LP2_NOFLUSH_L2);
-
-	/* Do suspend by ourselves if the firmware does not implement it */
-	if (call_firmware_op(do_idle, 0) == -ENOSYS)
-		cpu_suspend(0, tegra30_sleep_cpu_secondary_finish);
-
-	cpu_pm_exit();
-	tegra_clear_cpu_in_lp2();
-
-	local_fiq_enable();
-
-	return index;
-}
-
-static void tegra114_idle_enter_s2idle(struct cpuidle_device *dev,
-				       struct cpuidle_driver *drv,
-				       int index)
-{
-       tegra114_idle_power_down(dev, drv, index);
-}
-#endif
-
-static struct cpuidle_driver tegra_idle_driver = {
-	.name = "tegra_idle",
-	.owner = THIS_MODULE,
-	.state_count = TEGRA114_MAX_STATES,
-	.states = {
-		[0] = ARM_CPUIDLE_WFI_STATE_PWR(600),
-#ifdef CONFIG_PM_SLEEP
-		[1] = {
-			.enter			= tegra114_idle_power_down,
-			.enter_s2idle		= tegra114_idle_enter_s2idle,
-			.exit_latency		= 500,
-			.target_residency	= 1000,
-			.flags			= CPUIDLE_FLAG_TIMER_STOP,
-			.power_usage		= 0,
-			.name			= "powered-down",
-			.desc			= "CPU power gated",
-		},
-#endif
-	},
-};
-
-int __init tegra114_cpuidle_init(void)
-{
-	if (!psci_smp_available())
-		return cpuidle_register(&tegra_idle_driver, NULL);
-
-	return 0;
-}
diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c
deleted file mode 100644
index 69f3fa270fbe..000000000000
--- a/arch/arm/mach-tegra/cpuidle-tegra20.c
+++ /dev/null
@@ -1,212 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * CPU idle driver for Tegra CPUs
- *
- * Copyright (c) 2010-2012, NVIDIA Corporation.
- * Copyright (c) 2011 Google, Inc.
- * Author: Colin Cross <ccross@android.com>
- *         Gary King <gking@nvidia.com>
- *
- * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com>
- */
-
-#include <linux/clk/tegra.h>
-#include <linux/tick.h>
-#include <linux/cpuidle.h>
-#include <linux/cpu_pm.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <soc/tegra/flowctrl.h>
-
-#include <asm/cpuidle.h>
-#include <asm/smp_plat.h>
-#include <asm/suspend.h>
-
-#include "cpuidle.h"
-#include "iomap.h"
-#include "irq.h"
-#include "pm.h"
-#include "reset.h"
-#include "sleep.h"
-
-#ifdef CONFIG_PM_SLEEP
-static bool abort_flag;
-static atomic_t abort_barrier;
-static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev,
-				    struct cpuidle_driver *drv,
-				    int index);
-#define TEGRA20_MAX_STATES 2
-#else
-#define TEGRA20_MAX_STATES 1
-#endif
-
-static struct cpuidle_driver tegra_idle_driver = {
-	.name = "tegra_idle",
-	.owner = THIS_MODULE,
-	.states = {
-		ARM_CPUIDLE_WFI_STATE_PWR(600),
-#ifdef CONFIG_PM_SLEEP
-		{
-			.enter            = tegra20_idle_lp2_coupled,
-			.exit_latency     = 5000,
-			.target_residency = 10000,
-			.power_usage      = 0,
-			.flags            = CPUIDLE_FLAG_COUPLED |
-			                    CPUIDLE_FLAG_TIMER_STOP,
-			.name             = "powered-down",
-			.desc             = "CPU power gated",
-		},
-#endif
-	},
-	.state_count = TEGRA20_MAX_STATES,
-	.safe_state_index = 0,
-};
-
-#ifdef CONFIG_PM_SLEEP
-#ifdef CONFIG_SMP
-static int tegra20_reset_sleeping_cpu_1(void)
-{
-	int ret = 0;
-
-	tegra_pen_lock();
-
-	if (readb(tegra20_cpu1_resettable_status) == CPU_RESETTABLE)
-		tegra20_cpu_shutdown(1);
-	else
-		ret = -EINVAL;
-
-	tegra_pen_unlock();
-
-	return ret;
-}
-
-static void tegra20_wake_cpu1_from_reset(void)
-{
-	tegra_pen_lock();
-
-	tegra20_cpu_clear_resettable();
-
-	/* enable cpu clock on cpu */
-	tegra_enable_cpu_clock(1);
-
-	/* take the CPU out of reset */
-	tegra_cpu_out_of_reset(1);
-
-	/* unhalt the cpu */
-	flowctrl_write_cpu_halt(1, 0);
-
-	tegra_pen_unlock();
-}
-
-static int tegra20_reset_cpu_1(void)
-{
-	if (!cpu_online(1) || !tegra20_reset_sleeping_cpu_1())
-		return 0;
-
-	tegra20_wake_cpu1_from_reset();
-	return -EBUSY;
-}
-#else
-static inline void tegra20_wake_cpu1_from_reset(void)
-{
-}
-
-static inline int tegra20_reset_cpu_1(void)
-{
-	return 0;
-}
-#endif
-
-static bool tegra20_cpu_cluster_power_down(struct cpuidle_device *dev,
-					   struct cpuidle_driver *drv,
-					   int index)
-{
-	while (tegra20_cpu_is_resettable_soon())
-		cpu_relax();
-
-	if (tegra20_reset_cpu_1() || !tegra_cpu_rail_off_ready())
-		return false;
-
-	tegra_idle_lp2_last();
-
-	if (cpu_online(1))
-		tegra20_wake_cpu1_from_reset();
-
-	return true;
-}
-
-#ifdef CONFIG_SMP
-static bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev,
-					 struct cpuidle_driver *drv,
-					 int index)
-{
-	cpu_suspend(0, tegra20_sleep_cpu_secondary_finish);
-
-	tegra20_cpu_clear_resettable();
-
-	return true;
-}
-#else
-static inline bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev,
-						struct cpuidle_driver *drv,
-						int index)
-{
-	return true;
-}
-#endif
-
-static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev,
-				    struct cpuidle_driver *drv,
-				    int index)
-{
-	bool entered_lp2 = false;
-
-	if (tegra_pending_sgi())
-		WRITE_ONCE(abort_flag, true);
-
-	cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
-
-	if (abort_flag) {
-		cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
-		abort_flag = false;	/* clean flag for next coming */
-		return -EINTR;
-	}
-
-	local_fiq_disable();
-
-	tegra_set_cpu_in_lp2();
-	cpu_pm_enter();
-
-	if (dev->cpu == 0)
-		entered_lp2 = tegra20_cpu_cluster_power_down(dev, drv, index);
-	else
-		entered_lp2 = tegra20_idle_enter_lp2_cpu_1(dev, drv, index);
-
-	cpu_pm_exit();
-	tegra_clear_cpu_in_lp2();
-
-	local_fiq_enable();
-
-	smp_rmb();
-
-	return entered_lp2 ? index : 0;
-}
-#endif
-
-/*
- * Tegra20 HW appears to have a bug such that PCIe device interrupts, whether
- * they are legacy IRQs or MSI, are lost when LP2 is enabled. To work around
- * this, simply disable LP2 if the PCI driver and DT node are both enabled.
- */
-void tegra20_cpuidle_pcie_irqs_in_use(void)
-{
-	pr_info_once(
-		"Disabling cpuidle LP2 state, since PCIe IRQs are in use\n");
-	cpuidle_driver_state_disabled(&tegra_idle_driver, 1, true);
-}
-
-int __init tegra20_cpuidle_init(void)
-{
-	return cpuidle_register(&tegra_idle_driver, cpu_possible_mask);
-}
diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c
deleted file mode 100644
index c6128526877d..000000000000
--- a/arch/arm/mach-tegra/cpuidle-tegra30.c
+++ /dev/null
@@ -1,132 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * CPU idle driver for Tegra CPUs
- *
- * Copyright (c) 2010-2012, NVIDIA Corporation.
- * Copyright (c) 2011 Google, Inc.
- * Author: Colin Cross <ccross@android.com>
- *         Gary King <gking@nvidia.com>
- *
- * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com>
- */
-
-#include <linux/clk/tegra.h>
-#include <linux/tick.h>
-#include <linux/cpuidle.h>
-#include <linux/cpu_pm.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <asm/cpuidle.h>
-#include <asm/smp_plat.h>
-#include <asm/suspend.h>
-
-#include "cpuidle.h"
-#include "pm.h"
-#include "sleep.h"
-
-#ifdef CONFIG_PM_SLEEP
-static int tegra30_idle_lp2(struct cpuidle_device *dev,
-			    struct cpuidle_driver *drv,
-			    int index);
-#endif
-
-static struct cpuidle_driver tegra_idle_driver = {
-	.name = "tegra_idle",
-	.owner = THIS_MODULE,
-#ifdef CONFIG_PM_SLEEP
-	.state_count = 2,
-#else
-	.state_count = 1,
-#endif
-	.states = {
-		[0] = ARM_CPUIDLE_WFI_STATE_PWR(600),
-#ifdef CONFIG_PM_SLEEP
-		[1] = {
-			.enter			= tegra30_idle_lp2,
-			.exit_latency		= 2000,
-			.target_residency	= 2200,
-			.power_usage		= 0,
-			.flags			= CPUIDLE_FLAG_TIMER_STOP,
-			.name			= "powered-down",
-			.desc			= "CPU power gated",
-		},
-#endif
-	},
-};
-
-#ifdef CONFIG_PM_SLEEP
-static bool tegra30_cpu_cluster_power_down(struct cpuidle_device *dev,
-					   struct cpuidle_driver *drv,
-					   int index)
-{
-	/* All CPUs entering LP2 is not working.
-	 * Don't let CPU0 enter LP2 when any secondary CPU is online.
-	 */
-	if (num_online_cpus() > 1 || !tegra_cpu_rail_off_ready()) {
-		cpu_do_idle();
-		return false;
-	}
-
-	tegra_idle_lp2_last();
-
-	return true;
-}
-
-#ifdef CONFIG_SMP
-static bool tegra30_cpu_core_power_down(struct cpuidle_device *dev,
-					struct cpuidle_driver *drv,
-					int index)
-{
-	smp_wmb();
-
-	cpu_suspend(0, tegra30_sleep_cpu_secondary_finish);
-
-	return true;
-}
-#else
-static inline bool tegra30_cpu_core_power_down(struct cpuidle_device *dev,
-					       struct cpuidle_driver *drv,
-					       int index)
-{
-	return true;
-}
-#endif
-
-static int tegra30_idle_lp2(struct cpuidle_device *dev,
-			    struct cpuidle_driver *drv,
-			    int index)
-{
-	bool entered_lp2 = false;
-	bool last_cpu;
-
-	local_fiq_disable();
-
-	last_cpu = tegra_set_cpu_in_lp2();
-	cpu_pm_enter();
-
-	if (dev->cpu == 0) {
-		if (last_cpu)
-			entered_lp2 = tegra30_cpu_cluster_power_down(dev, drv,
-								     index);
-		else
-			cpu_do_idle();
-	} else {
-		entered_lp2 = tegra30_cpu_core_power_down(dev, drv, index);
-	}
-
-	cpu_pm_exit();
-	tegra_clear_cpu_in_lp2();
-
-	local_fiq_enable();
-
-	smp_rmb();
-
-	return (entered_lp2) ? index : 0;
-}
-#endif
-
-int __init tegra30_cpuidle_init(void)
-{
-	return cpuidle_register(&tegra_idle_driver, NULL);
-}
diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c
deleted file mode 100644
index d565c44cfc93..000000000000
--- a/arch/arm/mach-tegra/cpuidle.c
+++ /dev/null
@@ -1,50 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-tegra/cpuidle.c
- *
- * CPU idle driver for Tegra CPUs
- *
- * Copyright (c) 2010-2012, NVIDIA Corporation.
- * Copyright (c) 2011 Google, Inc.
- * Author: Colin Cross <ccross@android.com>
- *         Gary King <gking@nvidia.com>
- *
- * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <soc/tegra/fuse.h>
-
-#include "cpuidle.h"
-
-void __init tegra_cpuidle_init(void)
-{
-	switch (tegra_get_chip_id()) {
-	case TEGRA20:
-		if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
-			tegra20_cpuidle_init();
-		break;
-	case TEGRA30:
-		if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC))
-			tegra30_cpuidle_init();
-		break;
-	case TEGRA114:
-	case TEGRA124:
-		if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
-		    IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
-			tegra114_cpuidle_init();
-		break;
-	}
-}
-
-void tegra_cpuidle_pcie_irqs_in_use(void)
-{
-	switch (tegra_get_chip_id()) {
-	case TEGRA20:
-		if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
-			tegra20_cpuidle_pcie_irqs_in_use();
-		break;
-	}
-}
diff --git a/arch/arm/mach-tegra/cpuidle.h b/arch/arm/mach-tegra/cpuidle.h
deleted file mode 100644
index 4e1f459f5bd8..000000000000
--- a/arch/arm/mach-tegra/cpuidle.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
- */
-
-#ifndef __MACH_TEGRA_CPUIDLE_H
-#define __MACH_TEGRA_CPUIDLE_H
-
-#ifdef CONFIG_CPU_IDLE
-int tegra20_cpuidle_init(void);
-void tegra20_cpuidle_pcie_irqs_in_use(void);
-int tegra30_cpuidle_init(void);
-int tegra114_cpuidle_init(void);
-void tegra_cpuidle_init(void);
-void tegra_cpuidle_pcie_irqs_in_use(void);
-#else
-static inline void tegra_cpuidle_init(void) {}
-static inline void tegra_cpuidle_pcie_irqs_in_use(void) {}
-#endif
-
-#endif
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
index ace7a390b5fe..4e1ee70b2a3f 100644
--- a/arch/arm/mach-tegra/irq.c
+++ b/arch/arm/mach-tegra/irq.c
@@ -18,9 +18,10 @@
 #include <linux/of.h>
 #include <linux/syscore_ops.h>
 
+#include <soc/tegra/irq.h>
+
 #include "board.h"
 #include "iomap.h"
-#include "irq.h"
 
 #define SGI_MASK 0xFFFF
 
diff --git a/arch/arm/mach-tegra/irq.h b/arch/arm/mach-tegra/irq.h
deleted file mode 100644
index 7a94cf121448..000000000000
--- a/arch/arm/mach-tegra/irq.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
- */
-
-#ifndef __TEGRA_IRQ_H
-#define __TEGRA_IRQ_H
-
-bool tegra_pending_sgi(void);
-
-#endif
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index 3cab81b82866..d1e1a61b12cf 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -110,7 +110,7 @@ static void suspend_cpu_complex(void)
 	flowctrl_cpu_suspend_enter(cpu);
 }
 
-void tegra_clear_cpu_in_lp2(void)
+void tegra_pm_clear_cpu_in_lp2(void)
 {
 	int phy_cpu_id = cpu_logical_map(smp_processor_id());
 	u32 *cpu_in_lp2 = tegra_cpu_lp2_mask;
@@ -123,11 +123,9 @@ void tegra_clear_cpu_in_lp2(void)
 	spin_unlock(&tegra_lp2_lock);
 }
 
-bool tegra_set_cpu_in_lp2(void)
+void tegra_pm_set_cpu_in_lp2(void)
 {
 	int phy_cpu_id = cpu_logical_map(smp_processor_id());
-	bool last_cpu = false;
-	cpumask_t *cpu_lp2_mask = tegra_cpu_lp2_mask;
 	u32 *cpu_in_lp2 = tegra_cpu_lp2_mask;
 
 	spin_lock(&tegra_lp2_lock);
@@ -135,22 +133,15 @@ bool tegra_set_cpu_in_lp2(void)
 	BUG_ON((*cpu_in_lp2 & BIT(phy_cpu_id)));
 	*cpu_in_lp2 |= BIT(phy_cpu_id);
 
-	if ((phy_cpu_id == 0) && cpumask_equal(cpu_lp2_mask, cpu_online_mask))
-		last_cpu = true;
-	else if (tegra_get_chip_id() == TEGRA20 && phy_cpu_id == 1)
-		tegra20_cpu_set_resettable_soon();
-
 	spin_unlock(&tegra_lp2_lock);
-	return last_cpu;
-}
-
-int tegra_cpu_do_idle(void)
-{
-	return cpu_do_idle();
 }
 
 static int tegra_sleep_cpu(unsigned long v2p)
 {
+	if (tegra_cpu_car_ops->rail_off_ready &&
+	    WARN_ON(!tegra_cpu_rail_off_ready()))
+		return -EBUSY;
+
 	/*
 	 * L2 cache disabling using kernel API only allowed when all
 	 * secondary CPU's are offline. Cache have to be disabled with
@@ -159,9 +150,10 @@ static int tegra_sleep_cpu(unsigned long v2p)
 	 * if any of secondary CPU's is online and this is the LP2-idle
 	 * code-path only for Tegra20/30.
 	 */
-	if (trusted_foundations_registered())
-		outer_disable();
-
+#ifdef CONFIG_OUTER_CACHE
+	if (trusted_foundations_registered() && outer_cache.disable)
+		outer_cache.disable();
+#endif
 	/*
 	 * Note that besides of setting up CPU reset vector this firmware
 	 * call may also do the following, depending on the FW version:
@@ -202,14 +194,16 @@ static void tegra_pm_set(enum tegra_suspend_mode mode)
 	tegra_pmc_enter_suspend_mode(mode);
 }
 
-void tegra_idle_lp2_last(void)
+int tegra_pm_enter_lp2(void)
 {
+	int err;
+
 	tegra_pm_set(TEGRA_SUSPEND_LP2);
 
 	cpu_cluster_pm_enter();
 	suspend_cpu_complex();
 
-	cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu);
+	err = cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu);
 
 	/*
 	 * Resume L2 cache if it wasn't re-enabled early during resume,
@@ -221,6 +215,8 @@ void tegra_idle_lp2_last(void)
 
 	restore_cpu_complex();
 	cpu_cluster_pm_exit();
+
+	return err;
 }
 
 enum tegra_suspend_mode tegra_pm_validate_suspend_mode(
@@ -365,7 +361,7 @@ static int tegra_suspend_enter(suspend_state_t state)
 		tegra_suspend_enter_lp1();
 		break;
 	case TEGRA_SUSPEND_LP2:
-		tegra_set_cpu_in_lp2();
+		tegra_pm_set_cpu_in_lp2();
 		break;
 	default:
 		break;
@@ -386,7 +382,7 @@ static int tegra_suspend_enter(suspend_state_t state)
 		tegra_suspend_exit_lp1();
 		break;
 	case TEGRA_SUSPEND_LP2:
-		tegra_clear_cpu_in_lp2();
+		tegra_pm_clear_cpu_in_lp2();
 		break;
 	default:
 		break;
@@ -436,4 +432,18 @@ void __init tegra_init_suspend(void)
 
 	suspend_set_ops(&tegra_suspend_ops);
 }
+
+int tegra_pm_park_secondary_cpu(unsigned long cpu)
+{
+	if (cpu > 0) {
+		tegra_disable_clean_inv_dcache(TEGRA_FLUSH_CACHE_LOUIS);
+
+		if (tegra_get_chip_id() == TEGRA20)
+			tegra20_hotplug_shutdown();
+		else
+			tegra30_hotplug_shutdown();
+	}
+
+	return -EINVAL;
+}
 #endif
diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h
index 569151b3edc0..81525f5f4a44 100644
--- a/arch/arm/mach-tegra/pm.h
+++ b/arch/arm/mach-tegra/pm.h
@@ -23,10 +23,6 @@ void tegra20_sleep_core_init(void);
 void tegra30_lp1_iram_hook(void);
 void tegra30_sleep_core_init(void);
 
-void tegra_clear_cpu_in_lp2(void);
-bool tegra_set_cpu_in_lp2(void);
-int tegra_cpu_do_idle(void);
-void tegra_idle_lp2_last(void);
 extern void (*tegra_tear_down_cpu)(void);
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S
index e3f34815c9da..53123ae4ac3b 100644
--- a/arch/arm/mach-tegra/reset-handler.S
+++ b/arch/arm/mach-tegra/reset-handler.S
@@ -183,17 +183,6 @@ after_errata:
 	bleq	__die				@ CPU not present (to OS)
 #endif
 
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-	/* Are we on Tegra20? */
-	cmp	r6, #TEGRA20
-	bne	1f
-	/* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
-	mov	r0, #CPU_NOT_RESETTABLE
-	cmp	r10, #0
-	strbne	r0, [r12, #RESET_DATA(RESETTABLE_STATUS)]
-1:
-#endif
-
 	/* Waking up from LP1? */
 	ldr	r8, [r12, #RESET_DATA(MASK_LP1)]
 	tst	r8, r11				@ if in_lp1
diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h
index a4cfc08159f6..51265592cb1a 100644
--- a/arch/arm/mach-tegra/reset.h
+++ b/arch/arm/mach-tegra/reset.h
@@ -16,9 +16,8 @@
 #define TEGRA_RESET_STARTUP_SECONDARY	3
 #define TEGRA_RESET_STARTUP_LP2		4
 #define TEGRA_RESET_STARTUP_LP1		5
-#define TEGRA_RESET_RESETTABLE_STATUS	6
-#define TEGRA_RESET_TF_PRESENT		7
-#define TEGRA_RESET_DATA_SIZE		8
+#define TEGRA_RESET_TF_PRESENT		6
+#define TEGRA_RESET_DATA_SIZE		7
 
 #define RESET_DATA(x)	((TEGRA_RESET_##x)*4)
 
@@ -42,10 +41,6 @@ void __tegra_cpu_reset_handler_end(void);
 	(IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
 	((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP2] - \
 	 (u32)__tegra_cpu_reset_handler_start)))
-#define tegra20_cpu1_resettable_status \
-	(IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
-	((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_RESETTABLE_STATUS] - \
-	 (u32)__tegra_cpu_reset_handler_start)))
 #endif
 
 #define tegra_cpu_reset_handler_offset \
diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S
index 9a89f30d53ca..0e00ba8cf646 100644
--- a/arch/arm/mach-tegra/sleep-tegra20.S
+++ b/arch/arm/mach-tegra/sleep-tegra20.S
@@ -43,9 +43,6 @@
 #define APB_MISC_XM2CFGCPADCTRL2	0x8e4
 #define APB_MISC_XM2CFGDPADCTRL2	0x8e8
 
-#define __tegra20_cpu1_resettable_status_offset \
-	(__tegra_cpu_reset_handler_data_offset + RESET_DATA(RESETTABLE_STATUS))
-
 .macro pll_enable, rd, r_car_base, pll_base
 	ldr	\rd, [\r_car_base, #\pll_base]
 	tst	\rd, #(1 << 30)
@@ -90,10 +87,6 @@ ENDPROC(tegra20_hotplug_shutdown)
 ENTRY(tegra20_cpu_shutdown)
 	cmp	r0, #0
 	reteq	lr			@ must not be called for CPU 0
-	mov32	r1, TEGRA_IRAM_RESET_BASE_VIRT
-	ldr	r2, =__tegra20_cpu1_resettable_status_offset
-	mov	r12, #CPU_RESETTABLE
-	strb	r12, [r1, r2]
 
 	cpu_to_halt_reg r1, r0
 	ldr	r3, =TEGRA_FLOW_CTRL_VIRT
@@ -117,107 +110,6 @@ ENDPROC(tegra20_cpu_shutdown)
 
 #ifdef CONFIG_PM_SLEEP
 /*
- * tegra_pen_lock
- *
- * spinlock implementation with no atomic test-and-set and no coherence
- * using Peterson's algorithm on strongly-ordered registers
- * used to synchronize a cpu waking up from wfi with entering lp2 on idle
- *
- * The reference link of Peterson's algorithm:
- * http://en.wikipedia.org/wiki/Peterson's_algorithm
- *
- * SCRATCH37 = r1 = !turn (inverted from Peterson's algorithm)
- * on cpu 0:
- * r2 = flag[0] (in SCRATCH38)
- * r3 = flag[1] (in SCRATCH39)
- * on cpu1:
- * r2 = flag[1] (in SCRATCH39)
- * r3 = flag[0] (in SCRATCH38)
- *
- * must be called with MMU on
- * corrupts r0-r3, r12
- */
-ENTRY(tegra_pen_lock)
-	mov32	r3, TEGRA_PMC_VIRT
-	cpu_id	r0
-	add	r1, r3, #PMC_SCRATCH37
-	cmp	r0, #0
-	addeq	r2, r3, #PMC_SCRATCH38
-	addeq	r3, r3, #PMC_SCRATCH39
-	addne	r2, r3, #PMC_SCRATCH39
-	addne	r3, r3, #PMC_SCRATCH38
-
-	mov	r12, #1
-	str	r12, [r2]		@ flag[cpu] = 1
-	dsb
-	str	r12, [r1]		@ !turn = cpu
-1:	dsb
-	ldr	r12, [r3]
-	cmp	r12, #1			@ flag[!cpu] == 1?
-	ldreq	r12, [r1]
-	cmpeq	r12, r0			@ !turn == cpu?
-	beq	1b			@ while !turn == cpu && flag[!cpu] == 1
-
-	ret	lr			@ locked
-ENDPROC(tegra_pen_lock)
-
-ENTRY(tegra_pen_unlock)
-	dsb
-	mov32	r3, TEGRA_PMC_VIRT
-	cpu_id	r0
-	cmp	r0, #0
-	addeq	r2, r3, #PMC_SCRATCH38
-	addne	r2, r3, #PMC_SCRATCH39
-	mov	r12, #0
-	str	r12, [r2]
-	ret     lr
-ENDPROC(tegra_pen_unlock)
-
-/*
- * tegra20_cpu_clear_resettable(void)
- *
- * Called to clear the "resettable soon" flag in IRAM variable when
- * it is expected that the secondary CPU will be idle soon.
- */
-ENTRY(tegra20_cpu_clear_resettable)
-	mov32	r1, TEGRA_IRAM_RESET_BASE_VIRT
-	ldr	r2, =__tegra20_cpu1_resettable_status_offset
-	mov	r12, #CPU_NOT_RESETTABLE
-	strb	r12, [r1, r2]
-	ret	lr
-ENDPROC(tegra20_cpu_clear_resettable)
-
-/*
- * tegra20_cpu_set_resettable_soon(void)
- *
- * Called to set the "resettable soon" flag in IRAM variable when
- * it is expected that the secondary CPU will be idle soon.
- */
-ENTRY(tegra20_cpu_set_resettable_soon)
-	mov32	r1, TEGRA_IRAM_RESET_BASE_VIRT
-	ldr	r2, =__tegra20_cpu1_resettable_status_offset
-	mov	r12, #CPU_RESETTABLE_SOON
-	strb	r12, [r1, r2]
-	ret	lr
-ENDPROC(tegra20_cpu_set_resettable_soon)
-
-/*
- * tegra20_cpu_is_resettable_soon(void)
- *
- * Returns true if the "resettable soon" flag in IRAM variable has been
- * set because it is expected that the secondary CPU will be idle soon.
- */
-ENTRY(tegra20_cpu_is_resettable_soon)
-	mov32	r1, TEGRA_IRAM_RESET_BASE_VIRT
-	ldr	r2, =__tegra20_cpu1_resettable_status_offset
-	ldrb	r12, [r1, r2]
-	cmp	r12, #CPU_RESETTABLE_SOON
-	moveq	r0, #1
-	movne	r0, #0
-	ret	lr
-ENDPROC(tegra20_cpu_is_resettable_soon)
-
-/*
  * tegra20_sleep_core_finish(unsigned long v2p)
  *
  * Enters suspend in LP0 or LP1 by turning off the mmu and jumping to
@@ -243,68 +135,6 @@ ENTRY(tegra20_sleep_core_finish)
 ENDPROC(tegra20_sleep_core_finish)
 
 /*
- * tegra20_sleep_cpu_secondary_finish(unsigned long v2p)
- *
- * Enters WFI on secondary CPU by exiting coherency.
- */
-ENTRY(tegra20_sleep_cpu_secondary_finish)
-	stmfd	sp!, {r4-r11, lr}
-
-	mrc	p15, 0, r11, c1, c0, 1  @ save actlr before exiting coherency
-
-	/* Flush and disable the L1 data cache */
-	mov	r0, #TEGRA_FLUSH_CACHE_LOUIS
-	bl	tegra_disable_clean_inv_dcache
-
-	mov32	r0, TEGRA_IRAM_RESET_BASE_VIRT
-	ldr	r4, =__tegra20_cpu1_resettable_status_offset
-	mov	r3, #CPU_RESETTABLE
-	strb	r3, [r0, r4]
-
-	bl	tegra_cpu_do_idle
-
-	/*
-	 * cpu may be reset while in wfi, which will return through
-	 * tegra_resume to cpu_resume
-	 * or interrupt may wake wfi, which will return here
-	 * cpu state is unchanged - MMU is on, cache is on, coherency
-	 * is off, and the data cache is off
-	 *
-	 * r11 contains the original actlr
-	 */
-
-	bl	tegra_pen_lock
-
-	mov32	r0, TEGRA_IRAM_RESET_BASE_VIRT
-	ldr	r4, =__tegra20_cpu1_resettable_status_offset
-	mov	r3, #CPU_NOT_RESETTABLE
-	strb	r3, [r0, r4]
-
-	bl	tegra_pen_unlock
-
-	/* Re-enable the data cache */
-	mrc	p15, 0, r10, c1, c0, 0
-	orr	r10, r10, #CR_C
-	mcr	p15, 0, r10, c1, c0, 0
-	isb
-
-	mcr	p15, 0, r11, c1, c0, 1	@ reenable coherency
-
-	/* Invalidate the TLBs & BTAC */
-	mov	r1, #0
-	mcr	p15, 0, r1, c8, c3, 0	@ invalidate shared TLBs
-	mcr	p15, 0, r1, c7, c1, 6	@ invalidate shared BTAC
-	dsb
-	isb
-
-	/* the cpu was running with coherency disabled,
-	 * caches may be out of date */
-	bl	v7_flush_kern_cache_louis
-
-	ldmfd	sp!, {r4 - r11, pc}
-ENDPROC(tegra20_sleep_cpu_secondary_finish)
-
-/*
  * tegra20_tear_down_cpu
  *
  * Switches the CPU cluster to PLL-P and enters sleep.
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index 02cc6ff96f30..e7bcf7dc4675 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -265,11 +265,11 @@ ENTRY(tegra30_sleep_core_finish)
 ENDPROC(tegra30_sleep_core_finish)
 
 /*
- * tegra30_sleep_cpu_secondary_finish(unsigned long v2p)
+ * tegra30_pm_secondary_cpu_suspend(unsigned long unused_arg)
  *
  * Enters LP2 on secondary CPU by exiting coherency and powergating the CPU.
  */
-ENTRY(tegra30_sleep_cpu_secondary_finish)
+ENTRY(tegra30_pm_secondary_cpu_suspend)
 	mov	r7, lr
 
 	/* Flush and disable the L1 data cache */
@@ -281,7 +281,7 @@ ENTRY(tegra30_sleep_cpu_secondary_finish)
 	bl	tegra30_cpu_shutdown
 	mov	r0, #1                          @ never return here
 	ret	r7
-ENDPROC(tegra30_sleep_cpu_secondary_finish)
+ENDPROC(tegra30_pm_secondary_cpu_suspend)
 
 /*
  * tegra30_tear_down_cpu
diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h
index 78ef32a907c8..4718a3cb45a1 100644
--- a/arch/arm/mach-tegra/sleep.h
+++ b/arch/arm/mach-tegra/sleep.h
@@ -114,29 +114,14 @@
 .endm
 
 #else
-void tegra_pen_lock(void);
-void tegra_pen_unlock(void);
 void tegra_resume(void);
 int tegra_sleep_cpu_finish(unsigned long);
 void tegra_disable_clean_inv_dcache(u32 flag);
 
-#ifdef CONFIG_HOTPLUG_CPU
 void tegra20_hotplug_shutdown(void);
 void tegra30_hotplug_shutdown(void);
-#endif
-
-void tegra20_cpu_shutdown(int cpu);
-int tegra20_cpu_is_resettable_soon(void);
-void tegra20_cpu_clear_resettable(void);
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-void tegra20_cpu_set_resettable_soon(void);
-#else
-static inline void tegra20_cpu_set_resettable_soon(void) {}
-#endif
 
-int tegra20_sleep_cpu_secondary_finish(unsigned long);
 void tegra20_tear_down_cpu(void);
-int tegra30_sleep_cpu_secondary_finish(unsigned long);
 void tegra30_tear_down_cpu(void);
 
 #endif
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index e512e606eabd..f1ce2857a251 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -36,13 +36,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach-types.h>
+#include <asm/psci.h>
 #include <asm/setup.h>
 
 #include "board.h"
 #include "common.h"
-#include "cpuidle.h"
 #include "iomap.h"
-#include "irq.h"
 #include "pm.h"
 #include "reset.h"
 #include "sleep.h"
@@ -86,7 +85,6 @@ static void __init tegra_dt_init(void)
 static void __init tegra_dt_init_late(void)
 {
 	tegra_init_suspend();
-	tegra_cpuidle_init();
 
 	if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) &&
 	    of_machine_is_compatible("compal,paz00"))
@@ -95,6 +93,9 @@ static void __init tegra_dt_init_late(void)
 	if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) &&
 	    of_machine_is_compatible("nvidia,tegra20"))
 		platform_device_register_simple("tegra20-cpufreq", -1, NULL, 0);
+
+	if (IS_ENABLED(CONFIG_ARM_TEGRA_CPUIDLE) && !psci_smp_available())
+		platform_device_register_simple("tegra-cpuidle", -1, NULL, 0);
 }
 
 static const char * const tegra_dt_board_compat[] = {
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 3a4248fd7962..a9dd2f71cd19 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -12,10 +12,10 @@
 #include <linux/cpumask.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
-#include <linux/clk-provider.h>
 #include <linux/clk/zynq.h>
 #include <linux/clocksource.h>
 #include <linux/of_address.h>
+#include <linux/of_clk.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of.h>
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index ffb93db68e9c..509d4824dc1c 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -177,12 +177,6 @@ static irqreturn_t orion_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction orion_timer_irq = {
-	.name		= "orion_tick",
-	.flags		= IRQF_TIMER,
-	.handler	= orion_timer_interrupt
-};
-
 void __init
 orion_time_set_base(void __iomem *_timer_base)
 {
@@ -236,7 +230,9 @@ orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask,
 	/*
 	 * Setup clockevent timer (interrupt-driven).
 	 */
-	setup_irq(irq, &orion_timer_irq);
+	if (request_irq(irq, orion_timer_interrupt, IRQF_TIMER, "orion_tick",
+			NULL))
+		pr_err("Failed to request irq %u (orion_tick)\n", irq);
 	orion_clkevt.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&orion_clkevt, tclk, 1, 0xfffffffe);
 }
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 76778b2f520d..55d70cfe0f9e 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -39,7 +39,6 @@ config ARCH_BCM2835
 	select ARM_AMBA
 	select ARM_GIC
 	select ARM_TIMER_SP804
-	select HAVE_ARM_ARCH_TIMER
 	help
 	  This enables support for the Broadcom BCM2837 and BCM2711 SoC.
 	  These SoCs are used in the Raspberry Pi 3 and 4 devices.
@@ -301,7 +300,6 @@ config ARCH_ZX
 
 config ARCH_ZYNQMP
 	bool "Xilinx ZynqMP Family"
-	select ZYNQMP_FIRMWARE
 	help
 	  This enables support for Xilinx ZynqMP Family