Merge branch 'perm-fix' into omap-for-v4.19/fixes-v2

34 files changed, 1328 insertions, 475 deletions

diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index d575e8701955..04d038f3b6fa 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -4,12 +4,15 @@ config ZONE_DMA
 
 config XTENSA
 	def_bool y
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
 	select ARCH_NO_COHERENT_DMA_MMAP if !MMU
 	select ARCH_WANT_FRAME_POINTERS
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select BUILDTIME_EXTABLE_SORT
 	select CLONE_BACKWARDS
 	select COMMON_CLK
+	select DMA_NONCOHERENT_OPS
 	select GENERIC_ATOMIC64
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_SHOW
@@ -60,9 +63,6 @@ config HZ
 	int
 	default 100
 
-source "init/Kconfig"
-source "kernel/Kconfig.freezer"
-
 config LOCKDEP_SUPPORT
 	def_bool y
 
@@ -75,9 +75,6 @@ config TRACE_IRQFLAGS_SUPPORT
 config MMU
 	def_bool n
 
-config VARIANT_IRQ_SWITCH
-	def_bool n
-
 config HAVE_XTENSA_GPIO32
 	def_bool n
 
@@ -176,8 +173,6 @@ config XTENSA_UNALIGNED_USER
 
 	  Say Y here to enable unaligned memory access in user space.
 
-source "kernel/Kconfig.preempt"
-
 config HAVE_SMP
 	bool "System Supports SMP (MX)"
 	depends on XTENSA_VARIANT_CUSTOM
@@ -249,6 +244,23 @@ config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
 
 	  If in doubt, say Y.
 
+config MEMMAP_CACHEATTR
+	hex "Cache attributes for the memory address space"
+	depends on !MMU
+	default 0x22222222
+	help
+	  These cache attributes are set up for noMMU systems. Each hex digit
+	  specifies cache attributes for the corresponding 512MB memory
+	  region: bits 0..3 -- for addresses 0x00000000..0x1fffffff,
+	  bits 4..7 -- for addresses 0x20000000..0x3fffffff, and so on.
+
+	  Cache attribute values are specific for the MMU type, so e.g.
+	  for region protection MMUs: 2 is cache bypass, 4 is WB cached,
+	  1 is WT cached, f is illegal. For ful MMU: bit 0 makes it executable,
+	  bit 1 makes it writable, bits 2..3 meaning is 0: cache bypass,
+	  1: WB cache, 2: WT cache, 3: special (c and e are illegal, f is
+	  reserved).
+
 config KSEG_PADDR
 	hex "Physical address of the KSEG mapping"
 	depends on INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX && MMU
@@ -418,6 +430,10 @@ config XTENSA_PLATFORM_XTFPGA
 
 endchoice
 
+config PLATFORM_NR_IRQS
+	int
+	default 3 if XTENSA_PLATFORM_XT2000
+	default 0
 
 config XTENSA_CPU_CLOCK
 	int "CPU clock rate [MHz]"
@@ -455,6 +471,15 @@ config BUILTIN_DTB
 	string "DTB to build into the kernel image"
 	depends on OF
 
+config PARSE_BOOTPARAM
+	bool "Parse bootparam block"
+	default y
+	help
+	  Parse parameters passed to the kernel from the bootloader. It may
+	  be disabled if the kernel is known to run without the bootloader.
+
+	  If unsure, say Y.
+
 config BLK_DEV_SIMDISK
 	tristate "Host file-based simulated block device support"
 	default n
@@ -491,8 +516,6 @@ config SIMDISK1_FILENAME
 	  Another simulated disk in a host file for a buildroot-independent
 	  storage.
 
-source "mm/Kconfig"
-
 config FORCE_MAX_ZONEORDER
 	int "Maximum zone order"
 	default "11"
@@ -513,25 +536,13 @@ config PLATFORM_WANT_DEFAULT_MEM
 	def_bool n
 
 config DEFAULT_MEM_START
-	hex "Physical address of the default memory area start"
-	depends on PLATFORM_WANT_DEFAULT_MEM
-	default 0x00000000 if MMU
-	default 0x60000000 if !MMU
-	help
-	  This is the base address of the default memory area.
-	  Default memory area has platform-specific meaning, it may be used
-	  for e.g. early cache initialization.
-
-	  If unsure, leave the default value here.
-
-config DEFAULT_MEM_SIZE
-	hex "Maximal size of the default memory area"
-	depends on PLATFORM_WANT_DEFAULT_MEM
-	default 0x04000000
+	hex
+	prompt "PAGE_OFFSET/PHYS_OFFSET" if !MMU && PLATFORM_WANT_DEFAULT_MEM
+	default 0x60000000 if PLATFORM_WANT_DEFAULT_MEM
+	default 0x00000000
 	help
-	  This is the size of the default memory area.
-	  Default memory area has platform-specific meaning, it may be used
-	  for e.g. early cache initialization.
+	  This is the base address used for both PAGE_OFFSET and PHYS_OFFSET
+	  in noMMU configurations.
 
 	  If unsure, leave the default value here.
 
@@ -567,30 +578,8 @@ config XTFPGA_LCD_8BIT_ACCESS
 
 endmenu
 
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
 menu "Power management options"
 
 source "kernel/power/Kconfig"
 
 endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-source "arch/xtensa/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
-
-
diff --git a/arch/xtensa/Kconfig.debug b/arch/xtensa/Kconfig.debug
index f64c14adadb3..39de98e20018 100644
--- a/arch/xtensa/Kconfig.debug
+++ b/arch/xtensa/Kconfig.debug
@@ -1,7 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
 
 config DEBUG_TLB_SANITY
 	bool "Debug TLB sanity"
@@ -34,5 +31,3 @@ config S32C1I_SELFTEST
 	  It is easy to make wrong hardware configuration, this test should catch it early.
 
 	  Say 'N' on stable hardware.
-
-endmenu
diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile
index 3a934b72a272..295c120ed099 100644
--- a/arch/xtensa/Makefile
+++ b/arch/xtensa/Makefile
@@ -49,7 +49,7 @@ KBUILD_CFLAGS += $(call cc-option,-mno-serialize-volatile,)
 KBUILD_AFLAGS += -mlongcalls -mtext-section-literals
 
 ifneq ($(CONFIG_LD_NO_RELAX),)
-LDFLAGS := --no-relax
+KBUILD_LDFLAGS := --no-relax
 endif
 
 ifeq ($(shell echo __XTENSA_EB__ | $(CC) -E - | grep -v "\#"),1)
diff --git a/arch/xtensa/boot/Makefile b/arch/xtensa/boot/Makefile
index 53e4178711e6..dc9e0ba7122c 100644
--- a/arch/xtensa/boot/Makefile
+++ b/arch/xtensa/boot/Makefile
@@ -30,8 +30,7 @@ Image: boot-elf
 zImage: boot-redboot
 uImage: $(obj)/uImage
 
-boot-elf boot-redboot: $(addprefix $(obj)/,$(subdir-y)) \
-		       $(addprefix $(obj)/,$(host-progs))
+boot-elf boot-redboot: $(addprefix $(obj)/,$(subdir-y))
 	$(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS)
 
 OBJCOPYFLAGS = --strip-all -R .comment -R .note.gnu.build-id -O binary
diff --git a/arch/xtensa/boot/boot-elf/Makefile b/arch/xtensa/boot/boot-elf/Makefile
index 521471981356..12ae1e91cb75 100644
--- a/arch/xtensa/boot/boot-elf/Makefile
+++ b/arch/xtensa/boot/boot-elf/Makefile
@@ -25,7 +25,7 @@ $(obj)/Image.o: vmlinux.bin $(OBJS)
 		$(OBJS) $@
 
 $(obj)/../Image.elf: $(obj)/Image.o $(obj)/boot.lds
-	$(Q)$(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) \
+	$(Q)$(LD) $(KBUILD_LDFLAGS) $(LDFLAGS_vmlinux) \
 		-T $(obj)/boot.lds \
 		--build-id=none \
 		-o $@ $(obj)/Image.o
diff --git a/arch/xtensa/boot/boot-elf/bootstrap.S b/arch/xtensa/boot/boot-elf/bootstrap.S
index b6aa85328ac0..29c68426ab56 100644
--- a/arch/xtensa/boot/boot-elf/bootstrap.S
+++ b/arch/xtensa/boot/boot-elf/bootstrap.S
@@ -15,10 +15,6 @@
  */
 
 #include <asm/bootparam.h>
-#include <asm/processor.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/cacheasm.h>
 #include <asm/initialize_mmu.h>
 #include <asm/vectors.h>
 #include <linux/linkage.h>
@@ -33,16 +29,18 @@ _ResetVector:
 	.begin  no-absolute-literals
 	.literal_position
 
-	.align 4
-RomInitAddr:
 #if defined(CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX) && \
 	XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY
-	.word	CONFIG_KERNEL_LOAD_ADDRESS
+	.literal RomInitAddr, CONFIG_KERNEL_LOAD_ADDRESS
 #else
-	.word	KERNELOFFSET
+	.literal RomInitAddr, KERNELOFFSET
 #endif
-RomBootParam:
-	.word _bootparam
+#ifndef CONFIG_PARSE_BOOTPARAM
+	.literal RomBootParam, 0
+#else
+	.literal RomBootParam, _bootparam
+
+	.align 4
 _bootparam:
 	.short	BP_TAG_FIRST
 	.short	4
@@ -50,6 +48,7 @@ _bootparam:
 	.short	BP_TAG_LAST
 	.short	0
 	.long	0
+#endif
 
 	.align  4
 _SetupMMU:
diff --git a/arch/xtensa/configs/nommu_kc705_defconfig b/arch/xtensa/configs/nommu_kc705_defconfig
index 624f9b3a3878..f3fc4f970ca8 100644
--- a/arch/xtensa/configs/nommu_kc705_defconfig
+++ b/arch/xtensa/configs/nommu_kc705_defconfig
@@ -33,13 +33,13 @@ CONFIG_XTENSA_VARIANT_CUSTOM_NAME="de212"
 # CONFIG_XTENSA_VARIANT_MMU is not set
 CONFIG_XTENSA_UNALIGNED_USER=y
 CONFIG_PREEMPT=y
+CONFIG_MEMMAP_CACHEATTR=0xfff2442f
 # CONFIG_PCI is not set
 CONFIG_XTENSA_PLATFORM_XTFPGA=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0x9d050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=256M@0x60000000"
 CONFIG_USE_OF=y
 CONFIG_BUILTIN_DTB="kc705_nommu"
-CONFIG_DEFAULT_MEM_SIZE=0x10000000
 CONFIG_BINFMT_FLAT=y
 CONFIG_NET=y
 CONFIG_PACKET=y
diff --git a/arch/xtensa/include/asm/Kbuild b/arch/xtensa/include/asm/Kbuild
index e5e1e61c538c..82c756431b49 100644
--- a/arch/xtensa/include/asm/Kbuild
+++ b/arch/xtensa/include/asm/Kbuild
@@ -3,6 +3,7 @@ generic-y += compat.h
 generic-y += device.h
 generic-y += div64.h
 generic-y += dma-contiguous.h
+generic-y += dma-mapping.h
 generic-y += emergency-restart.h
 generic-y += exec.h
 generic-y += extable.h
diff --git a/arch/xtensa/include/asm/atomic.h b/arch/xtensa/include/asm/atomic.h
index e7a23f2a519a..7de0149e1cf7 100644
--- a/arch/xtensa/include/asm/atomic.h
+++ b/arch/xtensa/include/asm/atomic.h
@@ -197,107 +197,9 @@ ATOMIC_OPS(xor)
 #undef ATOMIC_OP_RETURN
 #undef ATOMIC_OP
 
-/**
- * atomic_sub_and_test - subtract value from variable and test result
- * @i: integer value to subtract
- * @v: pointer of type atomic_t
- *
- * Atomically subtracts @i from @v and returns
- * true if the result is zero, or false for all
- * other cases.
- */
-#define atomic_sub_and_test(i,v) (atomic_sub_return((i),(v)) == 0)
-
-/**
- * atomic_inc - increment atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1.
- */
-#define atomic_inc(v) atomic_add(1,(v))
-
-/**
- * atomic_inc - increment atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1.
- */
-#define atomic_inc_return(v) atomic_add_return(1,(v))
-
-/**
- * atomic_dec - decrement atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically decrements @v by 1.
- */
-#define atomic_dec(v) atomic_sub(1,(v))
-
-/**
- * atomic_dec_return - decrement atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically decrements @v by 1.
- */
-#define atomic_dec_return(v) atomic_sub_return(1,(v))
-
-/**
- * atomic_dec_and_test - decrement and test
- * @v: pointer of type atomic_t
- *
- * Atomically decrements @v by 1 and
- * returns true if the result is 0, or false for all other
- * cases.
- */
-#define atomic_dec_and_test(v) (atomic_sub_return(1,(v)) == 0)
-
-/**
- * atomic_inc_and_test - increment and test
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-#define atomic_inc_and_test(v) (atomic_add_return(1,(v)) == 0)
-
-/**
- * atomic_add_negative - add and test if negative
- * @v: pointer of type atomic_t
- * @i: integer value to add
- *
- * Atomically adds @i to @v and returns true
- * if the result is negative, or false when
- * result is greater than or equal to zero.
- */
-#define atomic_add_negative(i,v) (atomic_add_return((i),(v)) < 0)
-
 #define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
 #define atomic_xchg(v, new) (xchg(&((v)->counter), new))
 
-/**
- * __atomic_add_unless - add unless the number is a given value
- * @v: pointer of type atomic_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns the old value of @v.
- */
-static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int c, old;
-	c = atomic_read(v);
-	for (;;) {
-		if (unlikely(c == (u)))
-			break;
-		old = atomic_cmpxchg((v), c, c + (a));
-		if (likely(old == c))
-			break;
-		c = old;
-	}
-	return c;
-}
-
 #endif /* __KERNEL__ */
 
 #endif /* _XTENSA_ATOMIC_H */
diff --git a/arch/xtensa/include/asm/cacheasm.h b/arch/xtensa/include/asm/cacheasm.h
index 2041abb10a23..34545ecfdd6b 100644
--- a/arch/xtensa/include/asm/cacheasm.h
+++ b/arch/xtensa/include/asm/cacheasm.h
@@ -31,16 +31,32 @@
  *
  */
 
-	.macro	__loop_cache_all ar at insn size line_width
 
-	movi	\ar, 0
+	.macro	__loop_cache_unroll ar at insn size line_width max_immed
+
+	.if	(1 << (\line_width)) > (\max_immed)
+	.set	_reps, 1
+	.elseif	(2 << (\line_width)) > (\max_immed)
+	.set	_reps, 2
+	.else
+	.set	_reps, 4
+	.endif
+
+	__loopi	\ar, \at, \size, (_reps << (\line_width))
+	.set	_index, 0
+	.rep	_reps
+	\insn	\ar, _index << (\line_width)
+	.set	_index, _index + 1
+	.endr
+	__endla	\ar, \at, _reps << (\line_width)
+
+	.endm
+
 
-	__loopi	\ar, \at, \size, (4 << (\line_width))
-	\insn	\ar, 0 << (\line_width)
-	\insn	\ar, 1 << (\line_width)
-	\insn	\ar, 2 << (\line_width)
-	\insn	\ar, 3 << (\line_width)
-	__endla	\ar, \at, 4 << (\line_width)
+	.macro	__loop_cache_all ar at insn size line_width max_immed
+
+	movi	\ar, 0
+	__loop_cache_unroll \ar, \at, \insn, \size, \line_width, \max_immed
 
 	.endm
 
@@ -57,14 +73,9 @@
 	.endm
 
 
-	.macro	__loop_cache_page ar at insn line_width
+	.macro	__loop_cache_page ar at insn line_width max_immed
 
-	__loopi	\ar, \at, PAGE_SIZE, 4 << (\line_width)
-	\insn	\ar, 0 << (\line_width)
-	\insn	\ar, 1 << (\line_width)
-	\insn	\ar, 2 << (\line_width)
-	\insn	\ar, 3 << (\line_width)
-	__endla	\ar, \at, 4 << (\line_width)
+	__loop_cache_unroll \ar, \at, \insn, PAGE_SIZE, \line_width, \max_immed
 
 	.endm
 
@@ -72,7 +83,8 @@
 	.macro	___unlock_dcache_all ar at
 
 #if XCHAL_DCACHE_LINE_LOCKABLE && XCHAL_DCACHE_SIZE
-	__loop_cache_all \ar \at diu XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
+	__loop_cache_all \ar \at diu XCHAL_DCACHE_SIZE \
+		XCHAL_DCACHE_LINEWIDTH 240
 #endif
 
 	.endm
@@ -81,7 +93,8 @@
 	.macro	___unlock_icache_all ar at
 
 #if XCHAL_ICACHE_LINE_LOCKABLE && XCHAL_ICACHE_SIZE
-	__loop_cache_all \ar \at iiu XCHAL_ICACHE_SIZE XCHAL_ICACHE_LINEWIDTH
+	__loop_cache_all \ar \at iiu XCHAL_ICACHE_SIZE \
+		XCHAL_ICACHE_LINEWIDTH 240
 #endif
 
 	.endm
@@ -90,7 +103,8 @@
 	.macro	___flush_invalidate_dcache_all ar at
 
 #if XCHAL_DCACHE_SIZE
-	__loop_cache_all \ar \at diwbi XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
+	__loop_cache_all \ar \at diwbi XCHAL_DCACHE_SIZE \
+		XCHAL_DCACHE_LINEWIDTH 240
 #endif
 
 	.endm
@@ -99,7 +113,8 @@
 	.macro	___flush_dcache_all ar at
 
 #if XCHAL_DCACHE_SIZE
-	__loop_cache_all \ar \at diwb XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
+	__loop_cache_all \ar \at diwb XCHAL_DCACHE_SIZE \
+		XCHAL_DCACHE_LINEWIDTH 240
 #endif
 
 	.endm
@@ -108,8 +123,8 @@
 	.macro	___invalidate_dcache_all ar at
 
 #if XCHAL_DCACHE_SIZE
-	__loop_cache_all \ar \at dii __stringify(DCACHE_WAY_SIZE) \
-			 XCHAL_DCACHE_LINEWIDTH
+	__loop_cache_all \ar \at dii XCHAL_DCACHE_SIZE \
+			 XCHAL_DCACHE_LINEWIDTH 1020
 #endif
 
 	.endm
@@ -118,8 +133,8 @@
 	.macro	___invalidate_icache_all ar at
 
 #if XCHAL_ICACHE_SIZE
-	__loop_cache_all \ar \at iii __stringify(ICACHE_WAY_SIZE) \
-			 XCHAL_ICACHE_LINEWIDTH
+	__loop_cache_all \ar \at iii XCHAL_ICACHE_SIZE \
+			 XCHAL_ICACHE_LINEWIDTH 1020
 #endif
 
 	.endm
@@ -166,7 +181,7 @@
 	.macro	___flush_invalidate_dcache_page ar as
 
 #if XCHAL_DCACHE_SIZE
-	__loop_cache_page \ar \as dhwbi XCHAL_DCACHE_LINEWIDTH
+	__loop_cache_page \ar \as dhwbi XCHAL_DCACHE_LINEWIDTH 1020
 #endif
 
 	.endm
@@ -175,7 +190,7 @@
 	.macro ___flush_dcache_page ar as
 
 #if XCHAL_DCACHE_SIZE
-	__loop_cache_page \ar \as dhwb XCHAL_DCACHE_LINEWIDTH
+	__loop_cache_page \ar \as dhwb XCHAL_DCACHE_LINEWIDTH 1020
 #endif
 
 	.endm
@@ -184,7 +199,7 @@
 	.macro	___invalidate_dcache_page ar as
 
 #if XCHAL_DCACHE_SIZE
-	__loop_cache_page \ar \as dhi XCHAL_DCACHE_LINEWIDTH
+	__loop_cache_page \ar \as dhi XCHAL_DCACHE_LINEWIDTH 1020
 #endif
 
 	.endm
@@ -193,7 +208,7 @@
 	.macro	___invalidate_icache_page ar as
 
 #if XCHAL_ICACHE_SIZE
-	__loop_cache_page \ar \as ihi XCHAL_ICACHE_LINEWIDTH
+	__loop_cache_page \ar \as ihi XCHAL_ICACHE_LINEWIDTH 1020
 #endif
 
 	.endm
diff --git a/arch/xtensa/include/asm/dma-mapping.h b/arch/xtensa/include/asm/dma-mapping.h
deleted file mode 100644
index 44098800dad7..000000000000
--- a/arch/xtensa/include/asm/dma-mapping.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003 - 2005 Tensilica Inc.
- * Copyright (C) 2015 Cadence Design Systems Inc.
- */
-
-#ifndef _XTENSA_DMA_MAPPING_H
-#define _XTENSA_DMA_MAPPING_H
-
-#include <asm/cache.h>
-#include <asm/io.h>
-
-#include <linux/mm.h>
-#include <linux/scatterlist.h>
-
-extern const struct dma_map_ops xtensa_dma_map_ops;
-
-static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
-{
-	return &xtensa_dma_map_ops;
-}
-
-#endif	/* _XTENSA_DMA_MAPPING_H */
diff --git a/arch/xtensa/include/asm/hw_breakpoint.h b/arch/xtensa/include/asm/hw_breakpoint.h
index dbe3053b284a..9f119c1ca0b5 100644
--- a/arch/xtensa/include/asm/hw_breakpoint.h
+++ b/arch/xtensa/include/asm/hw_breakpoint.h
@@ -30,13 +30,16 @@ struct arch_hw_breakpoint {
 	u16 type;
 };
 
+struct perf_event_attr;
 struct perf_event;
 struct pt_regs;
 struct task_struct;
 
 int hw_breakpoint_slots(int type);
-int arch_check_bp_in_kernelspace(struct perf_event *bp);
-int arch_validate_hwbkpt_settings(struct perf_event *bp);
+int arch_check_bp_in_kernelspace(struct arch_hw_breakpoint *hw);
+int hw_breakpoint_arch_parse(struct perf_event *bp,
+			     const struct perf_event_attr *attr,
+			     struct arch_hw_breakpoint *hw);
 int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
 				    unsigned long val, void *data);
 
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index 42410f253597..10e9852b2fb4 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -177,36 +177,36 @@
 #endif /* defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU &&
 	  XCHAL_HAVE_SPANNING_WAY */
 
-#if !defined(CONFIG_MMU) && XCHAL_HAVE_TLBS && \
-		(XCHAL_DCACHE_SIZE || XCHAL_ICACHE_SIZE)
-	/* Enable data and instruction cache in the DEFAULT_MEMORY region
-	 * if the processor has DTLB and ITLB.
-	 */
+	.endm
+
+	.macro	initialize_cacheattr
 
-	movi	a5, PLATFORM_DEFAULT_MEM_START | XCHAL_SPANNING_WAY
+#if !defined(CONFIG_MMU) && XCHAL_HAVE_TLBS
+#if CONFIG_MEMMAP_CACHEATTR == 0x22222222 && XCHAL_HAVE_PTP_MMU
+#error Default MEMMAP_CACHEATTR of 0x22222222 does not work with full MMU.
+#endif
+
+	movi	a5, XCHAL_SPANNING_WAY
 	movi	a6, ~_PAGE_ATTRIB_MASK
-	movi	a7, CA_WRITEBACK
+	movi	a4, CONFIG_MEMMAP_CACHEATTR
 	movi	a8, 0x20000000
-	movi	a9, PLATFORM_DEFAULT_MEM_SIZE
-	j	2f
 1:
-	sub	a9, a9, a8
-2:
-#if XCHAL_DCACHE_SIZE
 	rdtlb1	a3, a5
+	xor	a3, a3, a4
 	and	a3, a3, a6
-	or	a3, a3, a7
+	xor	a3, a3, a4
 	wdtlb	a3, a5
-#endif
-#if XCHAL_ICACHE_SIZE
-	ritlb1	a4, a5
-	and	a4, a4, a6
-	or	a4, a4, a7
-	witlb	a4, a5
-#endif
+	ritlb1	a3, a5
+	xor	a3, a3, a4
+	and	a3, a3, a6
+	xor	a3, a3, a4
+	witlb	a3, a5
+
 	add	a5, a5, a8
-	bltu	a8, a9, 1b
+	srli	a4, a4, 4
+	bgeu	a5, a8, 1b
 
+	isync
 #endif
 
 	.endm
diff --git a/arch/xtensa/include/asm/irq.h b/arch/xtensa/include/asm/irq.h
index 19707db966f1..6c6ed23e0c79 100644
--- a/arch/xtensa/include/asm/irq.h
+++ b/arch/xtensa/include/asm/irq.h
@@ -12,32 +12,17 @@
 #define _XTENSA_IRQ_H
 
 #include <linux/init.h>
-#include <platform/hardware.h>
 #include <variant/core.h>
 
-#ifdef CONFIG_VARIANT_IRQ_SWITCH
-#include <variant/irq.h>
+#ifdef CONFIG_PLATFORM_NR_IRQS
+# define PLATFORM_NR_IRQS CONFIG_PLATFORM_NR_IRQS
 #else
-static inline void variant_irq_enable(unsigned int irq) { }
-static inline void variant_irq_disable(unsigned int irq) { }
-#endif
-
-#ifndef VARIANT_NR_IRQS
-# define VARIANT_NR_IRQS 0
-#endif
-#ifndef PLATFORM_NR_IRQS
 # define PLATFORM_NR_IRQS 0
 #endif
 #define XTENSA_NR_IRQS XCHAL_NUM_INTERRUPTS
-#define NR_IRQS (XTENSA_NR_IRQS + VARIANT_NR_IRQS + PLATFORM_NR_IRQS + 1)
+#define NR_IRQS (XTENSA_NR_IRQS + PLATFORM_NR_IRQS + 1)
 #define XTENSA_PIC_LINUX_IRQ(hwirq) ((hwirq) + 1)
 
-#if VARIANT_NR_IRQS == 0
-static inline void variant_init_irq(void) { }
-#else
-void variant_init_irq(void) __init;
-#endif
-
 static __inline__ int irq_canonicalize(int irq)
 {
 	return (irq);
diff --git a/arch/xtensa/include/asm/kmem_layout.h b/arch/xtensa/include/asm/kmem_layout.h
index 2317c835a4db..9c12babc016c 100644
--- a/arch/xtensa/include/asm/kmem_layout.h
+++ b/arch/xtensa/include/asm/kmem_layout.h
@@ -63,12 +63,6 @@
 #error XCHAL_KSEG_PADDR is not properly aligned to XCHAL_KSEG_ALIGNMENT
 #endif
 
-#else
-
-#define XCHAL_KSEG_CACHED_VADDR	__XTENSA_UL_CONST(0xd0000000)
-#define XCHAL_KSEG_BYPASS_VADDR	__XTENSA_UL_CONST(0xd8000000)
-#define XCHAL_KSEG_SIZE		__XTENSA_UL_CONST(0x08000000)
-
 #endif
 
 #ifndef CONFIG_KASAN
diff --git a/arch/xtensa/include/asm/page.h b/arch/xtensa/include/asm/page.h
index 5d69c11c01b8..09c56cba442e 100644
--- a/arch/xtensa/include/asm/page.h
+++ b/arch/xtensa/include/asm/page.h
@@ -14,7 +14,6 @@
 #include <asm/processor.h>
 #include <asm/types.h>
 #include <asm/cache.h>
-#include <platform/hardware.h>
 #include <asm/kmem_layout.h>
 
 /*
@@ -31,8 +30,8 @@
 #define MAX_LOW_PFN	(PHYS_PFN(XCHAL_KSEG_PADDR) + \
 			 PHYS_PFN(XCHAL_KSEG_SIZE))
 #else
-#define PAGE_OFFSET	PLATFORM_DEFAULT_MEM_START
-#define PHYS_OFFSET	PLATFORM_DEFAULT_MEM_START
+#define PAGE_OFFSET	_AC(CONFIG_DEFAULT_MEM_START, UL)
+#define PHYS_OFFSET	_AC(CONFIG_DEFAULT_MEM_START, UL)
 #define MAX_LOW_PFN	PHYS_PFN(0xfffffffful)
 #endif
 
diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h
index 38802259978f..29cfe421cf41 100644
--- a/arch/xtensa/include/asm/pgtable.h
+++ b/arch/xtensa/include/asm/pgtable.h
@@ -66,6 +66,7 @@
 #define FIRST_USER_ADDRESS	0UL
 #define FIRST_USER_PGD_NR	(FIRST_USER_ADDRESS >> PGDIR_SHIFT)
 
+#ifdef CONFIG_MMU
 /*
  * Virtual memory area. We keep a distance to other memory regions to be
  * on the safe side. We also use this area for cache aliasing.
@@ -80,6 +81,13 @@
 #define TLBTEMP_SIZE		ICACHE_WAY_SIZE
 #endif
 
+#else
+
+#define VMALLOC_START		__XTENSA_UL_CONST(0)
+#define VMALLOC_END		__XTENSA_UL_CONST(0xffffffff)
+
+#endif
+
 /*
  * For the Xtensa architecture, the PTE layout is as follows:
  *
diff --git a/arch/xtensa/include/asm/platform.h b/arch/xtensa/include/asm/platform.h
index f8fbef67bc5f..560483356a06 100644
--- a/arch/xtensa/include/asm/platform.h
+++ b/arch/xtensa/include/asm/platform.h
@@ -75,4 +75,31 @@ extern void platform_calibrate_ccount (void);
  */
 void cpu_reset(void) __attribute__((noreturn));
 
+/*
+ * Memory caching is platform-dependent in noMMU xtensa configurations.
+ * The following set of functions should be implemented in platform code
+ * in order to enable coherent DMA memory operations when CONFIG_MMU is not
+ * enabled. Default implementations do nothing and issue a warning.
+ */
+
+/*
+ * Check whether p points to a cached memory.
+ */
+bool platform_vaddr_cached(const void *p);
+
+/*
+ * Check whether p points to an uncached memory.
+ */
+bool platform_vaddr_uncached(const void *p);
+
+/*
+ * Return pointer to an uncached view of the cached sddress p.
+ */
+void *platform_vaddr_to_uncached(void *p);
+
+/*
+ * Return pointer to a cached view of the uncached sddress p.
+ */
+void *platform_vaddr_to_cached(void *p);
+
 #endif	/* _XTENSA_PLATFORM_H */
diff --git a/arch/xtensa/include/asm/processor.h b/arch/xtensa/include/asm/processor.h
index 5b0027d4ecc0..e4ccb88b7996 100644
--- a/arch/xtensa/include/asm/processor.h
+++ b/arch/xtensa/include/asm/processor.h
@@ -11,7 +11,6 @@
 #define _XTENSA_PROCESSOR_H
 
 #include <variant/core.h>
-#include <platform/hardware.h>
 
 #include <linux/compiler.h>
 #include <asm/ptrace.h>
diff --git a/arch/xtensa/include/asm/vectors.h b/arch/xtensa/include/asm/vectors.h
index 65d3da9db19b..7111280c8842 100644
--- a/arch/xtensa/include/asm/vectors.h
+++ b/arch/xtensa/include/asm/vectors.h
@@ -19,7 +19,6 @@
 #define _XTENSA_VECTORS_H
 
 #include <variant/core.h>
-#include <platform/hardware.h>
 #include <asm/kmem_layout.h>
 
 #if XCHAL_HAVE_PTP_MMU
diff --git a/arch/xtensa/include/uapi/asm/socket.h b/arch/xtensa/include/uapi/asm/socket.h
index 75a07b8119a9..1de07a7f7680 100644
--- a/arch/xtensa/include/uapi/asm/socket.h
+++ b/arch/xtensa/include/uapi/asm/socket.h
@@ -116,4 +116,7 @@
 
 #define SO_ZEROCOPY		60
 
+#define SO_TXTIME		61
+#define SCM_TXTIME		SO_TXTIME
+
 #endif	/* _XTENSA_SOCKET_H */
diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S
index 9c4e9433e536..2f76118ecf62 100644
--- a/arch/xtensa/kernel/head.S
+++ b/arch/xtensa/kernel/head.S
@@ -181,6 +181,8 @@ ENTRY(_startup)
 
 	isync
 
+	initialize_cacheattr
+
 #ifdef CONFIG_HAVE_SMP
 	movi	a2, CCON	# MX External Register to Configure Cache
 	movi	a3, 1
diff --git a/arch/xtensa/kernel/hw_breakpoint.c b/arch/xtensa/kernel/hw_breakpoint.c
index b35656ab7dbd..c2e387c19cda 100644
--- a/arch/xtensa/kernel/hw_breakpoint.c
+++ b/arch/xtensa/kernel/hw_breakpoint.c
@@ -33,14 +33,13 @@ int hw_breakpoint_slots(int type)
 	}
 }
 
-int arch_check_bp_in_kernelspace(struct perf_event *bp)
+int arch_check_bp_in_kernelspace(struct arch_hw_breakpoint *hw)
 {
 	unsigned int len;
 	unsigned long va;
-	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
 
-	va = info->address;
-	len = bp->attr.bp_len;
+	va = hw->address;
+	len = hw->len;
 
 	return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE);
 }
@@ -48,50 +47,41 @@ int arch_check_bp_in_kernelspace(struct perf_event *bp)
 /*
  * Construct an arch_hw_breakpoint from a perf_event.
  */
-static int arch_build_bp_info(struct perf_event *bp)
+int hw_breakpoint_arch_parse(struct perf_event *bp,
+			     const struct perf_event_attr *attr,
+			     struct arch_hw_breakpoint *hw)
 {
-	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
-
 	/* Type */
-	switch (bp->attr.bp_type) {
+	switch (attr->bp_type) {
 	case HW_BREAKPOINT_X:
-		info->type = XTENSA_BREAKPOINT_EXECUTE;
+		hw->type = XTENSA_BREAKPOINT_EXECUTE;
 		break;
 	case HW_BREAKPOINT_R:
-		info->type = XTENSA_BREAKPOINT_LOAD;
+		hw->type = XTENSA_BREAKPOINT_LOAD;
 		break;
 	case HW_BREAKPOINT_W:
-		info->type = XTENSA_BREAKPOINT_STORE;
+		hw->type = XTENSA_BREAKPOINT_STORE;
 		break;
 	case HW_BREAKPOINT_RW:
-		info->type = XTENSA_BREAKPOINT_LOAD | XTENSA_BREAKPOINT_STORE;
+		hw->type = XTENSA_BREAKPOINT_LOAD | XTENSA_BREAKPOINT_STORE;
 		break;
 	default:
 		return -EINVAL;
 	}
 
 	/* Len */
-	info->len = bp->attr.bp_len;
-	if (info->len < 1 || info->len > 64 || !is_power_of_2(info->len))
+	hw->len = attr->bp_len;
+	if (hw->len < 1 || hw->len > 64 || !is_power_of_2(hw->len))
 		return -EINVAL;
 
 	/* Address */
-	info->address = bp->attr.bp_addr;
-	if (info->address & (info->len - 1))
+	hw->address = attr->bp_addr;
+	if (hw->address & (hw->len - 1))
 		return -EINVAL;
 
 	return 0;
 }
 
-int arch_validate_hwbkpt_settings(struct perf_event *bp)
-{
-	int ret;
-
-	/* Build the arch_hw_breakpoint. */
-	ret = arch_build_bp_info(bp);
-	return ret;
-}
-
 int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
 				    unsigned long val, void *data)
 {
diff --git a/arch/xtensa/kernel/irq.c b/arch/xtensa/kernel/irq.c
index 18e4ef34ac45..a48bf2d10ac2 100644
--- a/arch/xtensa/kernel/irq.c
+++ b/arch/xtensa/kernel/irq.c
@@ -158,7 +158,6 @@ void __init init_IRQ(void)
 #ifdef CONFIG_SMP
 	ipi_init();
 #endif
-	variant_init_irq();
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/xtensa/kernel/pci-dma.c b/arch/xtensa/kernel/pci-dma.c
index 392b4a80ebc2..1fc138b6bc0a 100644
--- a/arch/xtensa/kernel/pci-dma.c
+++ b/arch/xtensa/kernel/pci-dma.c
@@ -16,26 +16,25 @@
  */
 
 #include <linux/dma-contiguous.h>
+#include <linux/dma-noncoherent.h>
 #include <linux/dma-direct.h>
 #include <linux/gfp.h>
 #include <linux/highmem.h>
 #include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/string.h>
 #include <linux/types.h>
 #include <asm/cacheflush.h>
 #include <asm/io.h>
+#include <asm/platform.h>
 
-static void do_cache_op(dma_addr_t dma_handle, size_t size,
+static void do_cache_op(phys_addr_t paddr, size_t size,
 			void (*fn)(unsigned long, unsigned long))
 {
-	unsigned long off = dma_handle & (PAGE_SIZE - 1);
-	unsigned long pfn = PFN_DOWN(dma_handle);
+	unsigned long off = paddr & (PAGE_SIZE - 1);
+	unsigned long pfn = PFN_DOWN(paddr);
 	struct page *page = pfn_to_page(pfn);
 
 	if (!PageHighMem(page))
-		fn((unsigned long)bus_to_virt(dma_handle), size);
+		fn((unsigned long)phys_to_virt(paddr), size);
 	else
 		while (size > 0) {
 			size_t sz = min_t(size_t, size, PAGE_SIZE - off);
@@ -49,14 +48,13 @@ static void do_cache_op(dma_addr_t dma_handle, size_t size,
 		}
 }
 
-static void xtensa_sync_single_for_cpu(struct device *dev,
-				       dma_addr_t dma_handle, size_t size,
-				       enum dma_data_direction dir)
+void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
+		size_t size, enum dma_data_direction dir)
 {
 	switch (dir) {
 	case DMA_BIDIRECTIONAL:
 	case DMA_FROM_DEVICE:
-		do_cache_op(dma_handle, size, __invalidate_dcache_range);
+		do_cache_op(paddr, size, __invalidate_dcache_range);
 		break;
 
 	case DMA_NONE:
@@ -68,15 +66,14 @@ static void xtensa_sync_single_for_cpu(struct device *dev,
 	}
 }
 
-static void xtensa_sync_single_for_device(struct device *dev,
-					  dma_addr_t dma_handle, size_t size,
-					  enum dma_data_direction dir)
+void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr,
+		size_t size, enum dma_data_direction dir)
 {
 	switch (dir) {
 	case DMA_BIDIRECTIONAL:
 	case DMA_TO_DEVICE:
 		if (XCHAL_DCACHE_IS_WRITEBACK)
-			do_cache_op(dma_handle, size, __flush_dcache_range);
+			do_cache_op(paddr, size, __flush_dcache_range);
 		break;
 
 	case DMA_NONE:
@@ -88,43 +85,66 @@ static void xtensa_sync_single_for_device(struct device *dev,
 	}
 }
 
-static void xtensa_sync_sg_for_cpu(struct device *dev,
-				   struct scatterlist *sg, int nents,
-				   enum dma_data_direction dir)
+#ifdef CONFIG_MMU
+bool platform_vaddr_cached(const void *p)
 {
-	struct scatterlist *s;
-	int i;
+	unsigned long addr = (unsigned long)p;
 
-	for_each_sg(sg, s, nents, i) {
-		xtensa_sync_single_for_cpu(dev, sg_dma_address(s),
-					   sg_dma_len(s), dir);
-	}
+	return addr >= XCHAL_KSEG_CACHED_VADDR &&
+	       addr - XCHAL_KSEG_CACHED_VADDR < XCHAL_KSEG_SIZE;
 }
 
-static void xtensa_sync_sg_for_device(struct device *dev,
-				      struct scatterlist *sg, int nents,
-				      enum dma_data_direction dir)
+bool platform_vaddr_uncached(const void *p)
 {
-	struct scatterlist *s;
-	int i;
+	unsigned long addr = (unsigned long)p;
 
-	for_each_sg(sg, s, nents, i) {
-		xtensa_sync_single_for_device(dev, sg_dma_address(s),
-					      sg_dma_len(s), dir);
-	}
+	return addr >= XCHAL_KSEG_BYPASS_VADDR &&
+	       addr - XCHAL_KSEG_BYPASS_VADDR < XCHAL_KSEG_SIZE;
+}
+
+void *platform_vaddr_to_uncached(void *p)
+{
+	return p + XCHAL_KSEG_BYPASS_VADDR - XCHAL_KSEG_CACHED_VADDR;
+}
+
+void *platform_vaddr_to_cached(void *p)
+{
+	return p + XCHAL_KSEG_CACHED_VADDR - XCHAL_KSEG_BYPASS_VADDR;
+}
+#else
+bool __attribute__((weak)) platform_vaddr_cached(const void *p)
+{
+	WARN_ONCE(1, "Default %s implementation is used\n", __func__);
+	return true;
+}
+
+bool __attribute__((weak)) platform_vaddr_uncached(const void *p)
+{
+	WARN_ONCE(1, "Default %s implementation is used\n", __func__);
+	return false;
+}
+
+void __attribute__((weak)) *platform_vaddr_to_uncached(void *p)
+{
+	WARN_ONCE(1, "Default %s implementation is used\n", __func__);
+	return p;
+}
+
+void __attribute__((weak)) *platform_vaddr_to_cached(void *p)
+{
+	WARN_ONCE(1, "Default %s implementation is used\n", __func__);
+	return p;
 }
+#endif
 
 /*
  * Note: We assume that the full memory space is always mapped to 'kseg'
  *	 Otherwise we have to use page attributes (not implemented).
  */
 
-static void *xtensa_dma_alloc(struct device *dev, size_t size,
-			      dma_addr_t *handle, gfp_t flag,
-			      unsigned long attrs)
+void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
+		gfp_t flag, unsigned long attrs)
 {
-	unsigned long ret;
-	unsigned long uncached;
 	unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT;
 	struct page *page = NULL;
 
@@ -137,7 +157,7 @@ static void *xtensa_dma_alloc(struct device *dev, size_t size,
 
 	if (gfpflags_allow_blocking(flag))
 		page = dma_alloc_from_contiguous(dev, count, get_order(size),
-						 flag);
+						 flag & __GFP_NOWARN);
 
 	if (!page)
 		page = alloc_pages(flag, get_order(size));
@@ -147,6 +167,10 @@ static void *xtensa_dma_alloc(struct device *dev, size_t size,
 
 	*handle = phys_to_dma(dev, page_to_phys(page));
 
+	if (attrs & DMA_ATTR_NO_KERNEL_MAPPING) {
+		return page;
+	}
+
 #ifdef CONFIG_MMU
 	if (PageHighMem(page)) {
 		void *p;
@@ -161,27 +185,21 @@ static void *xtensa_dma_alloc(struct device *dev, size_t size,
 		return p;
 	}
 #endif
-	ret = (unsigned long)page_address(page);
-	BUG_ON(ret < XCHAL_KSEG_CACHED_VADDR ||
-	       ret > XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_SIZE - 1);
-
-	uncached = ret + XCHAL_KSEG_BYPASS_VADDR - XCHAL_KSEG_CACHED_VADDR;
-	__invalidate_dcache_range(ret, size);
-
-	return (void *)uncached;
+	BUG_ON(!platform_vaddr_cached(page_address(page)));
+	__invalidate_dcache_range((unsigned long)page_address(page), size);
+	return platform_vaddr_to_uncached(page_address(page));
 }
 
-static void xtensa_dma_free(struct device *dev, size_t size, void *vaddr,
-			    dma_addr_t dma_handle, unsigned long attrs)
+void arch_dma_free(struct device *dev, size_t size, void *vaddr,
+		dma_addr_t dma_handle, unsigned long attrs)
 {
 	unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT;
-	unsigned long addr = (unsigned long)vaddr;
 	struct page *page;
 
-	if (addr >= XCHAL_KSEG_BYPASS_VADDR &&
-	    addr - XCHAL_KSEG_BYPASS_VADDR < XCHAL_KSEG_SIZE) {
-		addr += XCHAL_KSEG_CACHED_VADDR - XCHAL_KSEG_BYPASS_VADDR;
-		page = virt_to_page(addr);
+	if (attrs & DMA_ATTR_NO_KERNEL_MAPPING) {
+		page = vaddr;
+	} else if (platform_vaddr_uncached(vaddr)) {
+		page = virt_to_page(platform_vaddr_to_cached(vaddr));
 	} else {
 #ifdef CONFIG_MMU
 		dma_common_free_remap(vaddr, size, VM_MAP);
@@ -192,72 +210,3 @@ static void xtensa_dma_free(struct device *dev, size_t size, void *vaddr,
 	if (!dma_release_from_contiguous(dev, page, count))
 		__free_pages(page, get_order(size));
 }
-
-static dma_addr_t xtensa_map_page(struct device *dev, struct page *page,
-				  unsigned long offset, size_t size,
-				  enum dma_data_direction dir,
-				  unsigned long attrs)
-{
-	dma_addr_t dma_handle = page_to_phys(page) + offset;
-
-	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
-		xtensa_sync_single_for_device(dev, dma_handle, size, dir);
-
-	return dma_handle;
-}
-
-static void xtensa_unmap_page(struct device *dev, dma_addr_t dma_handle,
-			      size_t size, enum dma_data_direction dir,
-			      unsigned long attrs)
-{
-	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
-		xtensa_sync_single_for_cpu(dev, dma_handle, size, dir);
-}
-
-static int xtensa_map_sg(struct device *dev, struct scatterlist *sg,
-			 int nents, enum dma_data_direction dir,
-			 unsigned long attrs)
-{
-	struct scatterlist *s;
-	int i;
-
-	for_each_sg(sg, s, nents, i) {
-		s->dma_address = xtensa_map_page(dev, sg_page(s), s->offset,
-						 s->length, dir, attrs);
-	}
-	return nents;
-}
-
-static void xtensa_unmap_sg(struct device *dev,
-			    struct scatterlist *sg, int nents,
-			    enum dma_data_direction dir,
-			    unsigned long attrs)
-{
-	struct scatterlist *s;
-	int i;
-
-	for_each_sg(sg, s, nents, i) {
-		xtensa_unmap_page(dev, sg_dma_address(s),
-				  sg_dma_len(s), dir, attrs);
-	}
-}
-
-int xtensa_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	return 0;
-}
-
-const struct dma_map_ops xtensa_dma_map_ops = {
-	.alloc = xtensa_dma_alloc,
-	.free = xtensa_dma_free,
-	.map_page = xtensa_map_page,
-	.unmap_page = xtensa_unmap_page,
-	.map_sg = xtensa_map_sg,
-	.unmap_sg = xtensa_unmap_sg,
-	.sync_single_for_cpu = xtensa_sync_single_for_cpu,
-	.sync_single_for_device = xtensa_sync_single_for_device,
-	.sync_sg_for_cpu = xtensa_sync_sg_for_cpu,
-	.sync_sg_for_device = xtensa_sync_sg_for_device,
-	.mapping_error = xtensa_dma_mapping_error,
-};
-EXPORT_SYMBOL(xtensa_dma_map_ops);
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 686a27444bba..351283b60df6 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -47,8 +47,6 @@
 #include <asm/smp.h>
 #include <asm/sysmem.h>
 
-#include <platform/hardware.h>
-
 #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
 struct screen_info screen_info = {
 	.orig_x = 0,
@@ -81,6 +79,7 @@ static char __initdata command_line[COMMAND_LINE_SIZE];
 static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
 #endif
 
+#ifdef CONFIG_PARSE_BOOTPARAM
 /*
  * Boot parameter parsing.
  *
@@ -178,6 +177,13 @@ static int __init parse_bootparam(const bp_tag_t* tag)
 
 	return 0;
 }
+#else
+static int __init parse_bootparam(const bp_tag_t *tag)
+{
+	pr_info("Ignoring boot parameters at %p\n", tag);
+	return 0;
+}
+#endif
 
 #ifdef CONFIG_OF
 
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index 70b731edc7b8..a1c3edb8ad56 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -20,7 +20,7 @@
 
 #include <asm/vectors.h>
 #include <variant/core.h>
-#include <platform/hardware.h>
+
 OUTPUT_ARCH(xtensa)
 ENTRY(_start)
 
diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c
index c111a833205a..2ab0e0dcd166 100644
--- a/arch/xtensa/mm/fault.c
+++ b/arch/xtensa/mm/fault.c
@@ -42,7 +42,7 @@ void do_page_fault(struct pt_regs *regs)
 	int code;
 
 	int is_write, is_exec;
-	int fault;
+	vm_fault_t fault;
 	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 
 	code = SEGV_MAPERR;
diff --git a/arch/xtensa/platforms/iss/include/platform/hardware.h b/arch/xtensa/platforms/iss/include/platform/hardware.h
deleted file mode 100644
index 6930c12adc16..000000000000
--- a/arch/xtensa/platforms/iss/include/platform/hardware.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * include/asm-xtensa/platform-iss/hardware.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 Tensilica Inc.
- */
-
-/*
- * This file contains the default configuration of ISS.
- */
-
-#ifndef _XTENSA_PLATFORM_ISS_HARDWARE_H
-#define _XTENSA_PLATFORM_ISS_HARDWARE_H
-
-/*
- * Memory configuration.
- */
-
-#define PLATFORM_DEFAULT_MEM_START	0x00000000
-#define PLATFORM_DEFAULT_MEM_SIZE	0x08000000
-
-/*
- * Interrupt configuration.
- */
-
-#endif /* _XTENSA_PLATFORM_ISS_HARDWARE_H */
diff --git a/arch/xtensa/platforms/xt2000/include/platform/hardware.h b/arch/xtensa/platforms/xt2000/include/platform/hardware.h
index 886ef156ded3..8e5e0d6a81ec 100644
--- a/arch/xtensa/platforms/xt2000/include/platform/hardware.h
+++ b/arch/xtensa/platforms/xt2000/include/platform/hardware.h
@@ -17,17 +17,6 @@
 
 #include <variant/core.h>
 
-/* 
- * Memory configuration.
- */
-
-#define PLATFORM_DEFAULT_MEM_START 0x00000000
-#define PLATFORM_DEFAULT_MEM_SIZE 0x08000000
-
-/*
- * Number of platform IRQs
- */
-#define PLATFORM_NR_IRQS 3
 /*
  * On-board components.
  */
diff --git a/arch/xtensa/platforms/xtfpga/include/platform/hardware.h b/arch/xtensa/platforms/xtfpga/include/platform/hardware.h
index 1fda7e20dfcb..30d9cb6cf168 100644
--- a/arch/xtensa/platforms/xtfpga/include/platform/hardware.h
+++ b/arch/xtensa/platforms/xtfpga/include/platform/hardware.h
@@ -17,15 +17,6 @@
 #ifndef __XTENSA_XTAVNET_HARDWARE_H
 #define __XTENSA_XTAVNET_HARDWARE_H
 
-/* Memory configuration. */
-
-#define PLATFORM_DEFAULT_MEM_START __XTENSA_UL(CONFIG_DEFAULT_MEM_START)
-#define PLATFORM_DEFAULT_MEM_SIZE  __XTENSA_UL(CONFIG_DEFAULT_MEM_SIZE)
-
-/* Interrupt configuration. */
-
-#define PLATFORM_NR_IRQS	0
-
 /* Default assignment of LX60 devices to external interrupts. */
 
 #ifdef CONFIG_XTENSA_MX
diff --git a/arch/xtensa/variants/test_kc705_be/include/variant/core.h b/arch/xtensa/variants/test_kc705_be/include/variant/core.h
new file mode 100644
index 000000000000..a4ebdf7197d7
--- /dev/null
+++ b/arch/xtensa/variants/test_kc705_be/include/variant/core.h
@@ -0,0 +1,575 @@
+/* 
+ * xtensa/config/core-isa.h -- HAL definitions that are dependent on Xtensa
+ *				processor CORE configuration
+ *
+ *  See <xtensa/config/core.h>, which includes this file, for more details.
+ */
+
+/* Xtensa processor core configuration information.
+
+   Copyright (c) 1999-2015 Tensilica Inc.
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   "Software"), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+   IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+   CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+   TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+   SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  */
+
+#ifndef _XTENSA_CORE_CONFIGURATION_H
+#define _XTENSA_CORE_CONFIGURATION_H
+
+
+/****************************************************************************
+	    Parameters Useful for Any Code, USER or PRIVILEGED
+ ****************************************************************************/
+
+/*
+ *  Note:  Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is
+ *  configured, and a value of 0 otherwise.  These macros are always defined.
+ */
+
+
+/*----------------------------------------------------------------------
+				ISA
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_BE			1	/* big-endian byte ordering */
+#define XCHAL_HAVE_WINDOWED		1	/* windowed registers option */
+#define XCHAL_NUM_AREGS			32	/* num of physical addr regs */
+#define XCHAL_NUM_AREGS_LOG2		5	/* log2(XCHAL_NUM_AREGS) */
+#define XCHAL_MAX_INSTRUCTION_SIZE	8	/* max instr bytes (3..8) */
+#define XCHAL_HAVE_DEBUG		1	/* debug option */
+#define XCHAL_HAVE_DENSITY		1	/* 16-bit instructions */
+#define XCHAL_HAVE_LOOPS		1	/* zero-overhead loops */
+#define XCHAL_LOOP_BUFFER_SIZE		0	/* zero-ov. loop instr buffer size */
+#define XCHAL_HAVE_NSA			1	/* NSA/NSAU instructions */
+#define XCHAL_HAVE_MINMAX		1	/* MIN/MAX instructions */
+#define XCHAL_HAVE_SEXT			1	/* SEXT instruction */
+#define XCHAL_HAVE_DEPBITS		0	/* DEPBITS instruction */
+#define XCHAL_HAVE_CLAMPS		1	/* CLAMPS instruction */
+#define XCHAL_HAVE_MUL16		1	/* MUL16S/MUL16U instructions */
+#define XCHAL_HAVE_MUL32		1	/* MULL instruction */
+#define XCHAL_HAVE_MUL32_HIGH		1	/* MULUH/MULSH instructions */
+#define XCHAL_HAVE_DIV32		1	/* QUOS/QUOU/REMS/REMU instructions */
+#define XCHAL_HAVE_L32R			1	/* L32R instruction */
+#define XCHAL_HAVE_ABSOLUTE_LITERALS	0	/* non-PC-rel (extended) L32R */
+#define XCHAL_HAVE_CONST16		0	/* CONST16 instruction */
+#define XCHAL_HAVE_ADDX			1	/* ADDX#/SUBX# instructions */
+#define XCHAL_HAVE_WIDE_BRANCHES	0	/* B*.W18 or B*.W15 instr's */
+#define XCHAL_HAVE_PREDICTED_BRANCHES	0	/* B[EQ/EQZ/NE/NEZ]T instr's */
+#define XCHAL_HAVE_CALL4AND12		1	/* (obsolete option) */
+#define XCHAL_HAVE_ABS			1	/* ABS instruction */
+/*#define XCHAL_HAVE_POPC		0*/	/* POPC instruction */
+/*#define XCHAL_HAVE_CRC		0*/	/* CRC instruction */
+#define XCHAL_HAVE_RELEASE_SYNC		1	/* L32AI/S32RI instructions */
+#define XCHAL_HAVE_S32C1I		1	/* S32C1I instruction */
+#define XCHAL_HAVE_SPECULATION		0	/* speculation */
+#define XCHAL_HAVE_FULL_RESET		1	/* all regs/state reset */
+#define XCHAL_NUM_CONTEXTS		1	/* */
+#define XCHAL_NUM_MISC_REGS		2	/* num of scratch regs (0..4) */
+#define XCHAL_HAVE_TAP_MASTER		0	/* JTAG TAP control instr's */
+#define XCHAL_HAVE_PRID			1	/* processor ID register */
+#define XCHAL_HAVE_EXTERN_REGS		1	/* WER/RER instructions */
+#define XCHAL_HAVE_MX			0	/* MX core (Tensilica internal) */
+#define XCHAL_HAVE_MP_INTERRUPTS	0	/* interrupt distributor port */
+#define XCHAL_HAVE_MP_RUNSTALL		0	/* core RunStall control port */
+#define XCHAL_HAVE_PSO			0	/* Power Shut-Off */
+#define XCHAL_HAVE_PSO_CDM		0	/* core/debug/mem pwr domains */
+#define XCHAL_HAVE_PSO_FULL_RETENTION	0	/* all regs preserved on PSO */
+#define XCHAL_HAVE_THREADPTR		1	/* THREADPTR register */
+#define XCHAL_HAVE_BOOLEANS		1	/* boolean registers */
+#define XCHAL_HAVE_CP			1	/* CPENABLE reg (coprocessor) */
+#define XCHAL_CP_MAXCFG			8	/* max allowed cp id plus one */
+#define XCHAL_HAVE_MAC16		1	/* MAC16 package */
+
+#define XCHAL_HAVE_FUSION		 0	/* Fusion*/
+#define XCHAL_HAVE_FUSION_FP	 0	        /* Fusion FP option */
+#define XCHAL_HAVE_FUSION_LOW_POWER 0	/* Fusion Low Power option */
+#define XCHAL_HAVE_FUSION_AES	 0	        /* Fusion BLE/Wifi AES-128 CCM option */
+#define XCHAL_HAVE_FUSION_CONVENC	 0       /* Fusion Conv Encode option */
+#define XCHAL_HAVE_FUSION_LFSR_CRC	 0	/* Fusion LFSR-CRC option */
+#define XCHAL_HAVE_FUSION_BITOPS	 0	/* Fusion Bit Operations Support option */
+#define XCHAL_HAVE_FUSION_AVS	 0	/* Fusion AVS option */
+#define XCHAL_HAVE_FUSION_16BIT_BASEBAND	 0	/* Fusion 16-bit Baseband option */
+#define XCHAL_HAVE_HIFIPRO		0	/* HiFiPro Audio Engine pkg */
+#define XCHAL_HAVE_HIFI4		0	/* HiFi4 Audio Engine pkg */
+#define XCHAL_HAVE_HIFI4_VFPU		0	/* HiFi4 Audio Engine VFPU option */
+#define XCHAL_HAVE_HIFI3		0	/* HiFi3 Audio Engine pkg */
+#define XCHAL_HAVE_HIFI3_VFPU		0	/* HiFi3 Audio Engine VFPU option */
+#define XCHAL_HAVE_HIFI2		1	/* HiFi2 Audio Engine pkg */
+#define XCHAL_HAVE_HIFI2_MUL32X24	1	/* HiFi2 and 32x24 MACs */
+#define XCHAL_HAVE_HIFI2EP		1	/* HiFi2EP */
+#define XCHAL_HAVE_HIFI_MINI		0	
+
+
+#define XCHAL_HAVE_VECTORFPU2005	0	/* vector or user floating-point pkg */
+#define XCHAL_HAVE_USER_DPFPU         0       /* user DP floating-point pkg */
+#define XCHAL_HAVE_USER_SPFPU         0       /* user DP floating-point pkg */
+#define XCHAL_HAVE_FP                 0      /* single prec floating point */
+#define XCHAL_HAVE_FP_DIV             0  /* FP with DIV instructions */
+#define XCHAL_HAVE_FP_RECIP           0        /* FP with RECIP instructions */
+#define XCHAL_HAVE_FP_SQRT            0 /* FP with SQRT instructions */
+#define XCHAL_HAVE_FP_RSQRT           0        /* FP with RSQRT instructions */
+#define XCHAL_HAVE_DFP                        0     /* double precision FP pkg */
+#define XCHAL_HAVE_DFP_DIV            0 /* DFP with DIV instructions */
+#define XCHAL_HAVE_DFP_RECIP          0       /* DFP with RECIP instructions*/
+#define XCHAL_HAVE_DFP_SQRT           0        /* DFP with SQRT instructions */
+#define XCHAL_HAVE_DFP_RSQRT          0       /* DFP with RSQRT instructions*/
+#define XCHAL_HAVE_DFP_ACCEL		0	/* double precision FP acceleration pkg */
+#define XCHAL_HAVE_DFP_accel		XCHAL_HAVE_DFP_ACCEL				/* for backward compatibility */
+
+#define XCHAL_HAVE_DFPU_SINGLE_ONLY    0                 	/* DFPU Coprocessor, single precision only */
+#define XCHAL_HAVE_DFPU_SINGLE_DOUBLE  0               	/* DFPU Coprocessor, single and double precision */
+#define XCHAL_HAVE_VECTRA1		0	/* Vectra I  pkg */
+#define XCHAL_HAVE_VECTRALX		0	/* Vectra LX pkg */
+#define XCHAL_HAVE_PDX4		        0	/* PDX4 */
+#define XCHAL_HAVE_CONNXD2		0	/* ConnX D2 pkg */
+#define XCHAL_HAVE_CONNXD2_DUALLSFLIX   0	/* ConnX D2 & Dual LoadStore Flix */
+#define XCHAL_HAVE_BBE16		0	/* ConnX BBE16 pkg */
+#define XCHAL_HAVE_BBE16_RSQRT		0	/* BBE16 & vector recip sqrt */
+#define XCHAL_HAVE_BBE16_VECDIV		0	/* BBE16 & vector divide */
+#define XCHAL_HAVE_BBE16_DESPREAD	0	/* BBE16 & despread */
+#define XCHAL_HAVE_BBENEP		0	/* ConnX BBENEP pkgs */
+#define XCHAL_HAVE_BSP3			0	/* ConnX BSP3 pkg */
+#define XCHAL_HAVE_BSP3_TRANSPOSE	0	/* BSP3 & transpose32x32 */
+#define XCHAL_HAVE_SSP16		0	/* ConnX SSP16 pkg */
+#define XCHAL_HAVE_SSP16_VITERBI	0	/* SSP16 & viterbi */
+#define XCHAL_HAVE_TURBO16		0	/* ConnX Turbo16 pkg */
+#define XCHAL_HAVE_BBP16		0	/* ConnX BBP16 pkg */
+#define XCHAL_HAVE_FLIX3		0	/* basic 3-way FLIX option */
+#define XCHAL_HAVE_GRIVPEP              0   /*  GRIVPEP is General Release of IVPEP */
+#define XCHAL_HAVE_GRIVPEP_HISTOGRAM    0   /* Histogram option on GRIVPEP */
+
+
+/*----------------------------------------------------------------------
+				MISC
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_LOADSTORE_UNITS	1	/* load/store units */
+#define XCHAL_NUM_WRITEBUFFER_ENTRIES	8	/* size of write buffer */
+#define XCHAL_INST_FETCH_WIDTH		8	/* instr-fetch width in bytes */
+#define XCHAL_DATA_WIDTH		8	/* data width in bytes */
+#define XCHAL_DATA_PIPE_DELAY		1	/* d-side pipeline delay
+						   (1 = 5-stage, 2 = 7-stage) */
+#define XCHAL_CLOCK_GATING_GLOBAL	0	/* global clock gating */
+#define XCHAL_CLOCK_GATING_FUNCUNIT	0	/* funct. unit clock gating */
+/*  In T1050, applies to selected core load and store instructions (see ISA): */
+#define XCHAL_UNALIGNED_LOAD_EXCEPTION	1	/* unaligned loads cause exc. */
+#define XCHAL_UNALIGNED_STORE_EXCEPTION	1	/* unaligned stores cause exc.*/
+#define XCHAL_UNALIGNED_LOAD_HW		0	/* unaligned loads work in hw */
+#define XCHAL_UNALIGNED_STORE_HW	0	/* unaligned stores work in hw*/
+
+#define XCHAL_SW_VERSION		1100002	/* sw version of this header */
+
+#define XCHAL_CORE_ID			"test_kc705_be"	/* alphanum core name
+						   (CoreID) set in the Xtensa
+						   Processor Generator */
+
+#define XCHAL_BUILD_UNIQUE_ID		0x00058D8C	/* 22-bit sw build ID */
+
+/*
+ *  These definitions describe the hardware targeted by this software.
+ */
+#define XCHAL_HW_CONFIGID0		0xC1B3FFFF	/* ConfigID hi 32 bits*/
+#define XCHAL_HW_CONFIGID1		0x1C858D8C	/* ConfigID lo 32 bits*/
+#define XCHAL_HW_VERSION_NAME		"LX6.0.2"	/* full version name */
+#define XCHAL_HW_VERSION_MAJOR		2600	/* major ver# of targeted hw */
+#define XCHAL_HW_VERSION_MINOR		2	/* minor ver# of targeted hw */
+#define XCHAL_HW_VERSION		260002	/* major*100+minor */
+#define XCHAL_HW_REL_LX6		1
+#define XCHAL_HW_REL_LX6_0		1
+#define XCHAL_HW_REL_LX6_0_2		1
+#define XCHAL_HW_CONFIGID_RELIABLE	1
+/*  If software targets a *range* of hardware versions, these are the bounds: */
+#define XCHAL_HW_MIN_VERSION_MAJOR	2600	/* major v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION_MINOR	2	/* minor v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION		260002	/* earliest targeted hw */
+#define XCHAL_HW_MAX_VERSION_MAJOR	2600	/* major v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION_MINOR	2	/* minor v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION		260002	/* latest targeted hw */
+
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_ICACHE_LINESIZE		32	/* I-cache line size in bytes */
+#define XCHAL_DCACHE_LINESIZE		32	/* D-cache line size in bytes */
+#define XCHAL_ICACHE_LINEWIDTH		5	/* log2(I line size in bytes) */
+#define XCHAL_DCACHE_LINEWIDTH		5	/* log2(D line size in bytes) */
+
+#define XCHAL_ICACHE_SIZE		16384	/* I-cache size in bytes or 0 */
+#define XCHAL_DCACHE_SIZE		16384	/* D-cache size in bytes or 0 */
+
+#define XCHAL_DCACHE_IS_WRITEBACK	1	/* writeback feature */
+#define XCHAL_DCACHE_IS_COHERENT	0	/* MP coherence feature */
+
+#define XCHAL_HAVE_PREFETCH		1	/* PREFCTL register */
+#define XCHAL_HAVE_PREFETCH_L1		0	/* prefetch to L1 dcache */
+#define XCHAL_PREFETCH_CASTOUT_LINES	1	/* dcache pref. castout bufsz */
+#define XCHAL_PREFETCH_ENTRIES		8	/* cache prefetch entries */
+#define XCHAL_PREFETCH_BLOCK_ENTRIES	0	/* prefetch block streams */
+#define XCHAL_HAVE_CACHE_BLOCKOPS	0	/* block prefetch for caches */
+#define XCHAL_HAVE_ICACHE_TEST		1	/* Icache test instructions */
+#define XCHAL_HAVE_DCACHE_TEST		1	/* Dcache test instructions */
+#define XCHAL_HAVE_ICACHE_DYN_WAYS	0	/* Icache dynamic way support */
+#define XCHAL_HAVE_DCACHE_DYN_WAYS	0	/* Dcache dynamic way support */
+
+
+
+
+/****************************************************************************
+    Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code
+ ****************************************************************************/
+
+
+#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_PIF			1	/* any outbound PIF present */
+
+/*  If present, cache size in bytes == (ways * 2^(linewidth + setwidth)).  */
+
+/*  Number of cache sets in log2(lines per way):  */
+#define XCHAL_ICACHE_SETWIDTH		7
+#define XCHAL_DCACHE_SETWIDTH		7
+
+/*  Cache set associativity (number of ways):  */
+#define XCHAL_ICACHE_WAYS		4
+#define XCHAL_DCACHE_WAYS		4
+
+/*  Cache features:  */
+#define XCHAL_ICACHE_LINE_LOCKABLE	1
+#define XCHAL_DCACHE_LINE_LOCKABLE	1
+#define XCHAL_ICACHE_ECC_PARITY		0
+#define XCHAL_DCACHE_ECC_PARITY		0
+
+/*  Cache access size in bytes (affects operation of SICW instruction):  */
+#define XCHAL_ICACHE_ACCESS_SIZE	8
+#define XCHAL_DCACHE_ACCESS_SIZE	8
+
+#define XCHAL_DCACHE_BANKS		1	/* number of banks */
+
+/*  Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits):  */
+#define XCHAL_CA_BITS			4
+
+/*  Whether MEMCTL register has anything useful  */
+#define XCHAL_USE_MEMCTL		(((XCHAL_LOOP_BUFFER_SIZE > 0)	||	\
+					   XCHAL_DCACHE_IS_COHERENT	||	\
+					   XCHAL_HAVE_ICACHE_DYN_WAYS	||	\
+					   XCHAL_HAVE_DCACHE_DYN_WAYS)	&&	\
+					   (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RE_2012_0))
+
+
+/*----------------------------------------------------------------------
+			INTERNAL I/D RAM/ROMs and XLMI
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_INSTROM		0	/* number of core instr. ROMs */
+#define XCHAL_NUM_INSTRAM		0	/* number of core instr. RAMs */
+#define XCHAL_NUM_DATAROM		0	/* number of core data ROMs */
+#define XCHAL_NUM_DATARAM		0	/* number of core data RAMs */
+#define XCHAL_NUM_URAM			0	/* number of core unified RAMs*/
+#define XCHAL_NUM_XLMI			0	/* number of core XLMI ports */
+
+#define XCHAL_HAVE_IMEM_LOADSTORE	1	/* can load/store to IROM/IRAM*/
+
+
+/*----------------------------------------------------------------------
+			INTERRUPTS and TIMERS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_INTERRUPTS		1	/* interrupt option */
+#define XCHAL_HAVE_HIGHPRI_INTERRUPTS	1	/* med/high-pri. interrupts */
+#define XCHAL_HAVE_NMI			1	/* non-maskable interrupt */
+#define XCHAL_HAVE_CCOUNT		1	/* CCOUNT reg. (timer option) */
+#define XCHAL_NUM_TIMERS		3	/* number of CCOMPAREn regs */
+#define XCHAL_NUM_INTERRUPTS		22	/* number of interrupts */
+#define XCHAL_NUM_INTERRUPTS_LOG2	5	/* ceil(log2(NUM_INTERRUPTS)) */
+#define XCHAL_NUM_EXTINTERRUPTS		16	/* num of external interrupts */
+#define XCHAL_NUM_INTLEVELS		6	/* number of interrupt levels
+						   (not including level zero) */
+#define XCHAL_EXCM_LEVEL		4	/* level masked by PS.EXCM */
+	/* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */
+
+/*  Masks of interrupts at each interrupt level:  */
+#define XCHAL_INTLEVEL1_MASK		0x001F00BF
+#define XCHAL_INTLEVEL2_MASK		0x00000140
+#define XCHAL_INTLEVEL3_MASK		0x00200E00
+#define XCHAL_INTLEVEL4_MASK		0x00008000
+#define XCHAL_INTLEVEL5_MASK		0x00003000
+#define XCHAL_INTLEVEL6_MASK		0x00000000
+#define XCHAL_INTLEVEL7_MASK		0x00004000
+
+/*  Masks of interrupts at each range 1..n of interrupt levels:  */
+#define XCHAL_INTLEVEL1_ANDBELOW_MASK	0x001F00BF
+#define XCHAL_INTLEVEL2_ANDBELOW_MASK	0x001F01FF
+#define XCHAL_INTLEVEL3_ANDBELOW_MASK	0x003F0FFF
+#define XCHAL_INTLEVEL4_ANDBELOW_MASK	0x003F8FFF
+#define XCHAL_INTLEVEL5_ANDBELOW_MASK	0x003FBFFF
+#define XCHAL_INTLEVEL6_ANDBELOW_MASK	0x003FBFFF
+#define XCHAL_INTLEVEL7_ANDBELOW_MASK	0x003FFFFF
+
+/*  Level of each interrupt:  */
+#define XCHAL_INT0_LEVEL		1
+#define XCHAL_INT1_LEVEL		1
+#define XCHAL_INT2_LEVEL		1
+#define XCHAL_INT3_LEVEL		1
+#define XCHAL_INT4_LEVEL		1
+#define XCHAL_INT5_LEVEL		1
+#define XCHAL_INT6_LEVEL		2
+#define XCHAL_INT7_LEVEL		1
+#define XCHAL_INT8_LEVEL		2
+#define XCHAL_INT9_LEVEL		3
+#define XCHAL_INT10_LEVEL		3
+#define XCHAL_INT11_LEVEL		3
+#define XCHAL_INT12_LEVEL		5
+#define XCHAL_INT13_LEVEL		5
+#define XCHAL_INT14_LEVEL		7
+#define XCHAL_INT15_LEVEL		4
+#define XCHAL_INT16_LEVEL		1
+#define XCHAL_INT17_LEVEL		1
+#define XCHAL_INT18_LEVEL		1
+#define XCHAL_INT19_LEVEL		1
+#define XCHAL_INT20_LEVEL		1
+#define XCHAL_INT21_LEVEL		3
+#define XCHAL_DEBUGLEVEL		6	/* debug interrupt level */
+#define XCHAL_HAVE_DEBUG_EXTERN_INT	1	/* OCD external db interrupt */
+#define XCHAL_NMILEVEL			7	/* NMI "level" (for use with
+						   EXCSAVE/EPS/EPC_n, RFI n) */
+
+/*  Type of each interrupt:  */
+#define XCHAL_INT0_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT1_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT2_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT3_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT4_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT5_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT6_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT7_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT8_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT9_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT10_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT11_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT12_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT13_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT14_TYPE 	XTHAL_INTTYPE_NMI
+#define XCHAL_INT15_TYPE 	XTHAL_INTTYPE_PROFILING
+#define XCHAL_INT16_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT17_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT18_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT19_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT20_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT21_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+
+/*  Masks of interrupts for each type of interrupt:  */
+#define XCHAL_INTTYPE_MASK_UNCONFIGURED	0xFFC00000
+#define XCHAL_INTTYPE_MASK_SOFTWARE	0x00000880
+#define XCHAL_INTTYPE_MASK_EXTERN_EDGE	0x003F0000
+#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL	0x0000133F
+#define XCHAL_INTTYPE_MASK_TIMER	0x00002440
+#define XCHAL_INTTYPE_MASK_NMI		0x00004000
+#define XCHAL_INTTYPE_MASK_WRITE_ERROR	0x00000000
+#define XCHAL_INTTYPE_MASK_PROFILING	0x00008000
+
+/*  Interrupt numbers assigned to specific interrupt sources:  */
+#define XCHAL_TIMER0_INTERRUPT		6	/* CCOMPARE0 */
+#define XCHAL_TIMER1_INTERRUPT		10	/* CCOMPARE1 */
+#define XCHAL_TIMER2_INTERRUPT		13	/* CCOMPARE2 */
+#define XCHAL_TIMER3_INTERRUPT		XTHAL_TIMER_UNCONFIGURED
+#define XCHAL_NMI_INTERRUPT		14	/* non-maskable interrupt */
+#define XCHAL_PROFILING_INTERRUPT	15	/* profiling interrupt */
+
+/*  Interrupt numbers for levels at which only one interrupt is configured:  */
+#define XCHAL_INTLEVEL4_NUM		15
+#define XCHAL_INTLEVEL7_NUM		14
+/*  (There are many interrupts each at level(s) 1, 2, 3, 5.)  */
+
+
+/*
+ *  External interrupt mapping.
+ *  These macros describe how Xtensa processor interrupt numbers
+ *  (as numbered internally, eg. in INTERRUPT and INTENABLE registers)
+ *  map to external BInterrupt<n> pins, for those interrupts
+ *  configured as external (level-triggered, edge-triggered, or NMI).
+ *  See the Xtensa processor databook for more details.
+ */
+
+/*  Core interrupt numbers mapped to each EXTERNAL BInterrupt pin number:  */
+#define XCHAL_EXTINT0_NUM		0	/* (intlevel 1) */
+#define XCHAL_EXTINT1_NUM		1	/* (intlevel 1) */
+#define XCHAL_EXTINT2_NUM		2	/* (intlevel 1) */
+#define XCHAL_EXTINT3_NUM		3	/* (intlevel 1) */
+#define XCHAL_EXTINT4_NUM		4	/* (intlevel 1) */
+#define XCHAL_EXTINT5_NUM		5	/* (intlevel 1) */
+#define XCHAL_EXTINT6_NUM		8	/* (intlevel 2) */
+#define XCHAL_EXTINT7_NUM		9	/* (intlevel 3) */
+#define XCHAL_EXTINT8_NUM		12	/* (intlevel 5) */
+#define XCHAL_EXTINT9_NUM		14	/* (intlevel 7) */
+#define XCHAL_EXTINT10_NUM		16	/* (intlevel 1) */
+#define XCHAL_EXTINT11_NUM		17	/* (intlevel 1) */
+#define XCHAL_EXTINT12_NUM		18	/* (intlevel 1) */
+#define XCHAL_EXTINT13_NUM		19	/* (intlevel 1) */
+#define XCHAL_EXTINT14_NUM		20	/* (intlevel 1) */
+#define XCHAL_EXTINT15_NUM		21	/* (intlevel 3) */
+/*  EXTERNAL BInterrupt pin numbers mapped to each core interrupt number:  */
+#define XCHAL_INT0_EXTNUM		0	/* (intlevel 1) */
+#define XCHAL_INT1_EXTNUM		1	/* (intlevel 1) */
+#define XCHAL_INT2_EXTNUM		2	/* (intlevel 1) */
+#define XCHAL_INT3_EXTNUM		3	/* (intlevel 1) */
+#define XCHAL_INT4_EXTNUM		4	/* (intlevel 1) */
+#define XCHAL_INT5_EXTNUM		5	/* (intlevel 1) */
+#define XCHAL_INT8_EXTNUM		6	/* (intlevel 2) */
+#define XCHAL_INT9_EXTNUM		7	/* (intlevel 3) */
+#define XCHAL_INT12_EXTNUM		8	/* (intlevel 5) */
+#define XCHAL_INT14_EXTNUM		9	/* (intlevel 7) */
+#define XCHAL_INT16_EXTNUM		10	/* (intlevel 1) */
+#define XCHAL_INT17_EXTNUM		11	/* (intlevel 1) */
+#define XCHAL_INT18_EXTNUM		12	/* (intlevel 1) */
+#define XCHAL_INT19_EXTNUM		13	/* (intlevel 1) */
+#define XCHAL_INT20_EXTNUM		14	/* (intlevel 1) */
+#define XCHAL_INT21_EXTNUM		15	/* (intlevel 3) */
+
+
+/*----------------------------------------------------------------------
+			EXCEPTIONS and VECTORS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_XEA_VERSION		2	/* Xtensa Exception Architecture
+						   number: 1 == XEA1 (old)
+							   2 == XEA2 (new)
+							   0 == XEAX (extern) or TX */
+#define XCHAL_HAVE_XEA1			0	/* Exception Architecture 1 */
+#define XCHAL_HAVE_XEA2			1	/* Exception Architecture 2 */
+#define XCHAL_HAVE_XEAX			0	/* External Exception Arch. */
+#define XCHAL_HAVE_EXCEPTIONS		1	/* exception option */
+#define XCHAL_HAVE_HALT			0	/* halt architecture option */
+#define XCHAL_HAVE_BOOTLOADER		0	/* boot loader (for TX) */
+#define XCHAL_HAVE_MEM_ECC_PARITY	0	/* local memory ECC/parity */
+#define XCHAL_HAVE_VECTOR_SELECT	1	/* relocatable vectors */
+#define XCHAL_HAVE_VECBASE		1	/* relocatable vectors */
+#define XCHAL_VECBASE_RESET_VADDR	0x00002000  /* VECBASE reset value */
+#define XCHAL_VECBASE_RESET_PADDR	0x00002000
+#define XCHAL_RESET_VECBASE_OVERLAP	0
+
+#define XCHAL_RESET_VECTOR0_VADDR	0xFE000000
+#define XCHAL_RESET_VECTOR0_PADDR	0xFE000000
+#define XCHAL_RESET_VECTOR1_VADDR	0x00001000
+#define XCHAL_RESET_VECTOR1_PADDR	0x00001000
+#define XCHAL_RESET_VECTOR_VADDR	0xFE000000
+#define XCHAL_RESET_VECTOR_PADDR	0xFE000000
+#define XCHAL_USER_VECOFS		0x00000340
+#define XCHAL_USER_VECTOR_VADDR		0x00002340
+#define XCHAL_USER_VECTOR_PADDR		0x00002340
+#define XCHAL_KERNEL_VECOFS		0x00000300
+#define XCHAL_KERNEL_VECTOR_VADDR	0x00002300
+#define XCHAL_KERNEL_VECTOR_PADDR	0x00002300
+#define XCHAL_DOUBLEEXC_VECOFS		0x000003C0
+#define XCHAL_DOUBLEEXC_VECTOR_VADDR	0x000023C0
+#define XCHAL_DOUBLEEXC_VECTOR_PADDR	0x000023C0
+#define XCHAL_WINDOW_OF4_VECOFS		0x00000000
+#define XCHAL_WINDOW_UF4_VECOFS		0x00000040
+#define XCHAL_WINDOW_OF8_VECOFS		0x00000080
+#define XCHAL_WINDOW_UF8_VECOFS		0x000000C0
+#define XCHAL_WINDOW_OF12_VECOFS	0x00000100
+#define XCHAL_WINDOW_UF12_VECOFS	0x00000140
+#define XCHAL_WINDOW_VECTORS_VADDR	0x00002000
+#define XCHAL_WINDOW_VECTORS_PADDR	0x00002000
+#define XCHAL_INTLEVEL2_VECOFS		0x00000180
+#define XCHAL_INTLEVEL2_VECTOR_VADDR	0x00002180
+#define XCHAL_INTLEVEL2_VECTOR_PADDR	0x00002180
+#define XCHAL_INTLEVEL3_VECOFS		0x000001C0
+#define XCHAL_INTLEVEL3_VECTOR_VADDR	0x000021C0
+#define XCHAL_INTLEVEL3_VECTOR_PADDR	0x000021C0
+#define XCHAL_INTLEVEL4_VECOFS		0x00000200
+#define XCHAL_INTLEVEL4_VECTOR_VADDR	0x00002200
+#define XCHAL_INTLEVEL4_VECTOR_PADDR	0x00002200
+#define XCHAL_INTLEVEL5_VECOFS		0x00000240
+#define XCHAL_INTLEVEL5_VECTOR_VADDR	0x00002240
+#define XCHAL_INTLEVEL5_VECTOR_PADDR	0x00002240
+#define XCHAL_INTLEVEL6_VECOFS		0x00000280
+#define XCHAL_INTLEVEL6_VECTOR_VADDR	0x00002280
+#define XCHAL_INTLEVEL6_VECTOR_PADDR	0x00002280
+#define XCHAL_DEBUG_VECOFS		XCHAL_INTLEVEL6_VECOFS
+#define XCHAL_DEBUG_VECTOR_VADDR	XCHAL_INTLEVEL6_VECTOR_VADDR
+#define XCHAL_DEBUG_VECTOR_PADDR	XCHAL_INTLEVEL6_VECTOR_PADDR
+#define XCHAL_NMI_VECOFS		0x000002C0
+#define XCHAL_NMI_VECTOR_VADDR		0x000022C0
+#define XCHAL_NMI_VECTOR_PADDR		0x000022C0
+#define XCHAL_INTLEVEL7_VECOFS		XCHAL_NMI_VECOFS
+#define XCHAL_INTLEVEL7_VECTOR_VADDR	XCHAL_NMI_VECTOR_VADDR
+#define XCHAL_INTLEVEL7_VECTOR_PADDR	XCHAL_NMI_VECTOR_PADDR
+
+
+/*----------------------------------------------------------------------
+				DEBUG MODULE
+  ----------------------------------------------------------------------*/
+
+/*  Misc  */
+#define XCHAL_HAVE_DEBUG_ERI		1	/* ERI to debug module */
+#define XCHAL_HAVE_DEBUG_APB		0	/* APB to debug module */
+#define XCHAL_HAVE_DEBUG_JTAG		1	/* JTAG to debug module */
+
+/*  On-Chip Debug (OCD)  */
+#define XCHAL_HAVE_OCD			1	/* OnChipDebug option */
+#define XCHAL_NUM_IBREAK		2	/* number of IBREAKn regs */
+#define XCHAL_NUM_DBREAK		2	/* number of DBREAKn regs */
+#define XCHAL_HAVE_OCD_DIR_ARRAY	0	/* faster OCD option (to LX4) */
+#define XCHAL_HAVE_OCD_LS32DDR		1	/* L32DDR/S32DDR (faster OCD) */
+
+/*  TRAX (in core)  */
+#define XCHAL_HAVE_TRAX			1	/* TRAX in debug module */
+#define XCHAL_TRAX_MEM_SIZE		262144	/* TRAX memory size in bytes */
+#define XCHAL_TRAX_MEM_SHAREABLE	1	/* start/end regs; ready sig. */
+#define XCHAL_TRAX_ATB_WIDTH		0	/* ATB width (bits), 0=no ATB */
+#define XCHAL_TRAX_TIME_WIDTH		0	/* timestamp bitwidth, 0=none */
+
+/*  Perf counters  */
+#define XCHAL_NUM_PERF_COUNTERS		8	/* performance counters */
+
+
+/*----------------------------------------------------------------------
+				MMU
+  ----------------------------------------------------------------------*/
+
+/*  See core-matmap.h header file for more details.  */
+
+#define XCHAL_HAVE_TLBS			1	/* inverse of HAVE_CACHEATTR */
+#define XCHAL_HAVE_SPANNING_WAY		1	/* one way maps I+D 4GB vaddr */
+#define XCHAL_SPANNING_WAY		6	/* TLB spanning way number */
+#define XCHAL_HAVE_IDENTITY_MAP		0	/* vaddr == paddr always */
+#define XCHAL_HAVE_CACHEATTR		0	/* CACHEATTR register present */
+#define XCHAL_HAVE_MIMIC_CACHEATTR	0	/* region protection */
+#define XCHAL_HAVE_XLT_CACHEATTR	0	/* region prot. w/translation */
+#define XCHAL_HAVE_PTP_MMU		1	/* full MMU (with page table
+						   [autorefill] and protection)
+						   usable for an MMU-based OS */
+/*  If none of the above last 4 are set, it's a custom TLB configuration.  */
+#define XCHAL_ITLB_ARF_ENTRIES_LOG2	2	/* log2(autorefill way size) */
+#define XCHAL_DTLB_ARF_ENTRIES_LOG2	2	/* log2(autorefill way size) */
+
+#define XCHAL_MMU_ASID_BITS		8	/* number of bits in ASIDs */
+#define XCHAL_MMU_RINGS			4	/* number of rings (1..4) */
+#define XCHAL_MMU_RING_BITS		2	/* num of bits in RING field */
+
+#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */
+
+
+#endif /* _XTENSA_CORE_CONFIGURATION_H */
+
diff --git a/arch/xtensa/variants/test_kc705_be/include/variant/tie-asm.h b/arch/xtensa/variants/test_kc705_be/include/variant/tie-asm.h
new file mode 100644
index 000000000000..b87fe1a5177b
--- /dev/null
+++ b/arch/xtensa/variants/test_kc705_be/include/variant/tie-asm.h
@@ -0,0 +1,308 @@
+/* 
+ * tie-asm.h -- compile-time HAL assembler definitions dependent on CORE & TIE
+ *
+ *  NOTE:  This header file is not meant to be included directly.
+ */
+
+/* This header file contains assembly-language definitions (assembly
+   macros, etc.) for this specific Xtensa processor's TIE extensions
+   and options.  It is customized to this Xtensa processor configuration.
+
+   Copyright (c) 1999-2015 Cadence Design Systems Inc.
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   "Software"), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+   IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+   CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+   TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+   SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  */
+
+#ifndef _XTENSA_CORE_TIE_ASM_H
+#define _XTENSA_CORE_TIE_ASM_H
+
+/*  Selection parameter values for save-area save/restore macros:  */
+/*  Option vs. TIE:  */
+#define XTHAL_SAS_TIE	0x0001	/* custom extension or coprocessor */
+#define XTHAL_SAS_OPT	0x0002	/* optional (and not a coprocessor) */
+#define XTHAL_SAS_ANYOT	0x0003	/* both of the above */
+/*  Whether used automatically by compiler:  */
+#define XTHAL_SAS_NOCC	0x0004	/* not used by compiler w/o special opts/code */
+#define XTHAL_SAS_CC	0x0008	/* used by compiler without special opts/code */
+#define XTHAL_SAS_ANYCC	0x000C	/* both of the above */
+/*  ABI handling across function calls:  */
+#define XTHAL_SAS_CALR	0x0010	/* caller-saved */
+#define XTHAL_SAS_CALE	0x0020	/* callee-saved */
+#define XTHAL_SAS_GLOB	0x0040	/* global across function calls (in thread) */
+#define XTHAL_SAS_ANYABI	0x0070	/* all of the above three */
+/*  Misc  */
+#define XTHAL_SAS_ALL	0xFFFF	/* include all default NCP contents */
+#define XTHAL_SAS3(optie,ccuse,abi)	( ((optie) & XTHAL_SAS_ANYOT)  \
+					| ((ccuse) & XTHAL_SAS_ANYCC)  \
+					| ((abi)   & XTHAL_SAS_ANYABI) )
+
+
+    /*
+      *  Macro to store all non-coprocessor (extra) custom TIE and optional state
+      *  (not including zero-overhead loop registers).
+      *  Required parameters:
+      *      ptr         Save area pointer address register (clobbered)
+      *                  (register must contain a 4 byte aligned address).
+      *      at1..at4    Four temporary address registers (first XCHAL_NCP_NUM_ATMPS
+      *                  registers are clobbered, the remaining are unused).
+      *  Optional parameters:
+      *      continue    If macro invoked as part of a larger store sequence, set to 1
+      *                  if this is not the first in the sequence.  Defaults to 0.
+      *      ofs         Offset from start of larger sequence (from value of first ptr
+      *                  in sequence) at which to store.  Defaults to next available space
+      *                  (or 0 if <continue> is 0).
+      *      select      Select what category(ies) of registers to store, as a bitmask
+      *                  (see XTHAL_SAS_xxx constants).  Defaults to all registers.
+      *      alloc       Select what category(ies) of registers to allocate; if any
+      *                  category is selected here that is not in <select>, space for
+      *                  the corresponding registers is skipped without doing any store.
+      */
+    .macro xchal_ncp_store  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
+	xchal_sa_start	\continue, \ofs
+	// Optional global registers used by default by the compiler:
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\select)
+	xchal_sa_align	\ptr, 0, 1020, 4, 4
+	rur.THREADPTR	\at1		// threadptr option
+	s32i	\at1, \ptr, .Lxchal_ofs_+0
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 1020, 4, 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	// Optional caller-saved registers used by default by the compiler:
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select)
+	xchal_sa_align	\ptr, 0, 1016, 4, 4
+	rsr.ACCLO	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+0
+	rsr.ACCHI	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
+	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 1016, 4, 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
+	.endif
+	// Optional caller-saved registers not used by default by the compiler:
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
+	xchal_sa_align	\ptr, 0, 1000, 4, 4
+	rsr.BR	\at1		// boolean option
+	s32i	\at1, \ptr, .Lxchal_ofs_+0
+	rsr.SCOMPARE1	\at1		// conditional store option
+	s32i	\at1, \ptr, .Lxchal_ofs_+4
+	rsr.M0	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+8
+	rsr.M1	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+12
+	rsr.M2	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+16
+	rsr.M3	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+20
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 24
+	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 1000, 4, 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 24
+	.endif
+    .endm	// xchal_ncp_store
+
+    /*
+      *  Macro to load all non-coprocessor (extra) custom TIE and optional state
+      *  (not including zero-overhead loop registers).
+      *  Required parameters:
+      *      ptr         Save area pointer address register (clobbered)
+      *                  (register must contain a 4 byte aligned address).
+      *      at1..at4    Four temporary address registers (first XCHAL_NCP_NUM_ATMPS
+      *                  registers are clobbered, the remaining are unused).
+      *  Optional parameters:
+      *      continue    If macro invoked as part of a larger load sequence, set to 1
+      *                  if this is not the first in the sequence.  Defaults to 0.
+      *      ofs         Offset from start of larger sequence (from value of first ptr
+      *                  in sequence) at which to load.  Defaults to next available space
+      *                  (or 0 if <continue> is 0).
+      *      select      Select what category(ies) of registers to load, as a bitmask
+      *                  (see XTHAL_SAS_xxx constants).  Defaults to all registers.
+      *      alloc       Select what category(ies) of registers to allocate; if any
+      *                  category is selected here that is not in <select>, space for
+      *                  the corresponding registers is skipped without doing any load.
+      */
+    .macro xchal_ncp_load  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
+	xchal_sa_start	\continue, \ofs
+	// Optional global registers used by default by the compiler:
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\select)
+	xchal_sa_align	\ptr, 0, 1020, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_+0
+	wur.THREADPTR	\at1		// threadptr option
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 1020, 4, 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	// Optional caller-saved registers used by default by the compiler:
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select)
+	xchal_sa_align	\ptr, 0, 1016, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_+0
+	wsr.ACCLO	\at1		// MAC16 option
+	l32i	\at1, \ptr, .Lxchal_ofs_+4
+	wsr.ACCHI	\at1		// MAC16 option
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
+	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 1016, 4, 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
+	.endif
+	// Optional caller-saved registers not used by default by the compiler:
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
+	xchal_sa_align	\ptr, 0, 1000, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_+0
+	wsr.BR	\at1		// boolean option
+	l32i	\at1, \ptr, .Lxchal_ofs_+4
+	wsr.SCOMPARE1	\at1		// conditional store option
+	l32i	\at1, \ptr, .Lxchal_ofs_+8
+	wsr.M0	\at1		// MAC16 option
+	l32i	\at1, \ptr, .Lxchal_ofs_+12
+	wsr.M1	\at1		// MAC16 option
+	l32i	\at1, \ptr, .Lxchal_ofs_+16
+	wsr.M2	\at1		// MAC16 option
+	l32i	\at1, \ptr, .Lxchal_ofs_+20
+	wsr.M3	\at1		// MAC16 option
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 24
+	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 1000, 4, 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 24
+	.endif
+    .endm	// xchal_ncp_load
+
+
+#define XCHAL_NCP_NUM_ATMPS	1
+
+    /* 
+     *  Macro to store the state of TIE coprocessor AudioEngineLX.
+     *  Required parameters:
+     *      ptr         Save area pointer address register (clobbered)
+     *                  (register must contain a 8 byte aligned address).
+     *      at1..at4    Four temporary address registers (first XCHAL_CP1_NUM_ATMPS
+     *                  registers are clobbered, the remaining are unused).
+     *  Optional parameters are the same as for xchal_ncp_store.
+     */
+#define xchal_cp_AudioEngineLX_store	xchal_cp1_store
+    .macro	xchal_cp1_store  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
+	xchal_sa_start \continue, \ofs
+	// Custom caller-saved registers not used by default by the compiler:
+	.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
+	xchal_sa_align	\ptr, 0, 0, 8, 8
+	rur.AE_OVF_SAR	\at1		// ureg 240
+	s32i	\at1, \ptr, .Lxchal_ofs_+0
+	rur.AE_BITHEAD	\at1		// ureg 241
+	s32i	\at1, \ptr, .Lxchal_ofs_+4
+	rur.AE_TS_FTS_BU_BP	\at1		// ureg 242
+	s32i	\at1, \ptr, .Lxchal_ofs_+8
+	rur.AE_SD_NO	\at1		// ureg 243
+	s32i	\at1, \ptr, .Lxchal_ofs_+12
+	rur.AE_CBEGIN0	\at1		// ureg 246
+	s32i	\at1, \ptr, .Lxchal_ofs_+16
+	rur.AE_CEND0	\at1		// ureg 247
+	s32i	\at1, \ptr, .Lxchal_ofs_+20
+	ae_sp24x2s.i	aep0, \ptr, .Lxchal_ofs_+24
+	ae_sp24x2s.i	aep1, \ptr, .Lxchal_ofs_+32
+	ae_sp24x2s.i	aep2, \ptr, .Lxchal_ofs_+40
+	ae_sp24x2s.i	aep3, \ptr, .Lxchal_ofs_+48
+	ae_sp24x2s.i	aep4, \ptr, .Lxchal_ofs_+56
+	addi	\ptr, \ptr, 64
+	ae_sp24x2s.i	aep5, \ptr, .Lxchal_ofs_+0
+	ae_sp24x2s.i	aep6, \ptr, .Lxchal_ofs_+8
+	ae_sp24x2s.i	aep7, \ptr, .Lxchal_ofs_+16
+	ae_sq56s.i	aeq0, \ptr, .Lxchal_ofs_+24
+	ae_sq56s.i	aeq1, \ptr, .Lxchal_ofs_+32
+	ae_sq56s.i	aeq2, \ptr, .Lxchal_ofs_+40
+	ae_sq56s.i	aeq3, \ptr, .Lxchal_ofs_+48
+	.set	.Lxchal_pofs_, .Lxchal_pofs_ + 64
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 56
+	.elseif ((XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 0, 8, 8
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 120
+	.endif
+    .endm	// xchal_cp1_store
+
+    /* 
+     *  Macro to load the state of TIE coprocessor AudioEngineLX.
+     *  Required parameters:
+     *      ptr         Save area pointer address register (clobbered)
+     *                  (register must contain a 8 byte aligned address).
+     *      at1..at4    Four temporary address registers (first XCHAL_CP1_NUM_ATMPS
+     *                  registers are clobbered, the remaining are unused).
+     *  Optional parameters are the same as for xchal_ncp_load.
+     */
+#define xchal_cp_AudioEngineLX_load	xchal_cp1_load
+    .macro	xchal_cp1_load  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
+	xchal_sa_start \continue, \ofs
+	// Custom caller-saved registers not used by default by the compiler:
+	.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
+	xchal_sa_align	\ptr, 0, 0, 8, 8
+	l32i	\at1, \ptr, .Lxchal_ofs_+0
+	wur.AE_OVF_SAR	\at1		// ureg 240
+	l32i	\at1, \ptr, .Lxchal_ofs_+4
+	wur.AE_BITHEAD	\at1		// ureg 241
+	l32i	\at1, \ptr, .Lxchal_ofs_+8
+	wur.AE_TS_FTS_BU_BP	\at1		// ureg 242
+	l32i	\at1, \ptr, .Lxchal_ofs_+12
+	wur.AE_SD_NO	\at1		// ureg 243
+	l32i	\at1, \ptr, .Lxchal_ofs_+16
+	wur.AE_CBEGIN0	\at1		// ureg 246
+	l32i	\at1, \ptr, .Lxchal_ofs_+20
+	wur.AE_CEND0	\at1		// ureg 247
+	ae_lp24x2.i	aep0, \ptr, .Lxchal_ofs_+24
+	ae_lp24x2.i	aep1, \ptr, .Lxchal_ofs_+32
+	ae_lp24x2.i	aep2, \ptr, .Lxchal_ofs_+40
+	ae_lp24x2.i	aep3, \ptr, .Lxchal_ofs_+48
+	ae_lp24x2.i	aep4, \ptr, .Lxchal_ofs_+56
+	addi	\ptr, \ptr, 64
+	ae_lp24x2.i	aep5, \ptr, .Lxchal_ofs_+0
+	ae_lp24x2.i	aep6, \ptr, .Lxchal_ofs_+8
+	ae_lp24x2.i	aep7, \ptr, .Lxchal_ofs_+16
+	addi	\ptr, \ptr, 24
+	ae_lq56.i	aeq0, \ptr, .Lxchal_ofs_+0
+	ae_lq56.i	aeq1, \ptr, .Lxchal_ofs_+8
+	ae_lq56.i	aeq2, \ptr, .Lxchal_ofs_+16
+	ae_lq56.i	aeq3, \ptr, .Lxchal_ofs_+24
+	.set	.Lxchal_pofs_, .Lxchal_pofs_ + 88
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 32
+	.elseif ((XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 0, 8, 8
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 120
+	.endif
+    .endm	// xchal_cp1_load
+
+#define XCHAL_CP1_NUM_ATMPS	1
+#define XCHAL_SA_NUM_ATMPS	1
+
+	/*  Empty macros for unconfigured coprocessors:  */
+	.macro xchal_cp0_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp0_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp2_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp2_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp3_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp3_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp4_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp4_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp5_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp5_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp6_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp6_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp7_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp7_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+
+#endif /*_XTENSA_CORE_TIE_ASM_H*/
+
diff --git a/arch/xtensa/variants/test_kc705_be/include/variant/tie.h b/arch/xtensa/variants/test_kc705_be/include/variant/tie.h
new file mode 100644
index 000000000000..4e1b4baac8e2
--- /dev/null
+++ b/arch/xtensa/variants/test_kc705_be/include/variant/tie.h
@@ -0,0 +1,182 @@
+/* 
+ * tie.h -- compile-time HAL definitions dependent on CORE & TIE configuration
+ *
+ *  NOTE:  This header file is not meant to be included directly.
+ */
+
+/* This header file describes this specific Xtensa processor's TIE extensions
+   that extend basic Xtensa core functionality.  It is customized to this
+   Xtensa processor configuration.
+
+   Copyright (c) 1999-2015 Cadence Design Systems Inc.
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   "Software"), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+   IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+   CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+   TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+   SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  */
+
+#ifndef _XTENSA_CORE_TIE_H
+#define _XTENSA_CORE_TIE_H
+
+#define XCHAL_CP_NUM			2	/* number of coprocessors */
+#define XCHAL_CP_MAX			8	/* max CP ID + 1 (0 if none) */
+#define XCHAL_CP_MASK			0x82	/* bitmask of all CPs by ID */
+#define XCHAL_CP_PORT_MASK		0x80	/* bitmask of only port CPs */
+
+/*  Basic parameters of each coprocessor:  */
+#define XCHAL_CP1_NAME			"AudioEngineLX"
+#define XCHAL_CP1_IDENT			AudioEngineLX
+#define XCHAL_CP1_SA_SIZE		120	/* size of state save area */
+#define XCHAL_CP1_SA_ALIGN		8	/* min alignment of save area */
+#define XCHAL_CP_ID_AUDIOENGINELX   	1	/* coprocessor ID (0..7) */
+#define XCHAL_CP7_NAME			"XTIOP"
+#define XCHAL_CP7_IDENT			XTIOP
+#define XCHAL_CP7_SA_SIZE		0	/* size of state save area */
+#define XCHAL_CP7_SA_ALIGN		1	/* min alignment of save area */
+#define XCHAL_CP_ID_XTIOP           	7	/* coprocessor ID (0..7) */
+
+/*  Filler info for unassigned coprocessors, to simplify arrays etc:  */
+#define XCHAL_CP0_SA_SIZE		0
+#define XCHAL_CP0_SA_ALIGN		1
+#define XCHAL_CP2_SA_SIZE		0
+#define XCHAL_CP2_SA_ALIGN		1
+#define XCHAL_CP3_SA_SIZE		0
+#define XCHAL_CP3_SA_ALIGN		1
+#define XCHAL_CP4_SA_SIZE		0
+#define XCHAL_CP4_SA_ALIGN		1
+#define XCHAL_CP5_SA_SIZE		0
+#define XCHAL_CP5_SA_ALIGN		1
+#define XCHAL_CP6_SA_SIZE		0
+#define XCHAL_CP6_SA_ALIGN		1
+
+/*  Save area for non-coprocessor optional and custom (TIE) state:  */
+#define XCHAL_NCP_SA_SIZE		36
+#define XCHAL_NCP_SA_ALIGN		4
+
+/*  Total save area for optional and custom state (NCP + CPn):  */
+#define XCHAL_TOTAL_SA_SIZE		160	/* with 16-byte align padding */
+#define XCHAL_TOTAL_SA_ALIGN		8	/* actual minimum alignment */
+
+/*
+ * Detailed contents of save areas.
+ * NOTE:  caller must define the XCHAL_SA_REG macro (not defined here)
+ * before expanding the XCHAL_xxx_SA_LIST() macros.
+ *
+ * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize,
+ *		dbnum,base,regnum,bitsz,gapsz,reset,x...)
+ *
+ *	s = passed from XCHAL_*_LIST(s), eg. to select how to expand
+ *	ccused = set if used by compiler without special options or code
+ *	abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global)
+ *	kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg)
+ *	opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg)
+ *	name = lowercase reg name (no quotes)
+ *	galign = group byte alignment (power of 2) (galign >= align)
+ *	align = register byte alignment (power of 2)
+ *	asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz)
+ *	  (not including any pad bytes required to galign this or next reg)
+ *	dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>)
+ *	base = reg shortname w/o index (or sr=special, ur=TIE user reg)
+ *	regnum = reg index in regfile, or special/TIE-user reg number
+ *	bitsz = number of significant bits (regfile width, or ur/sr mask bits)
+ *	gapsz = intervening bits, if bitsz bits not stored contiguously
+ *	(padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize)
+ *	reset = register reset value (or 0 if undefined at reset)
+ *	x = reserved for future use (0 until then)
+ *
+ *  To filter out certain registers, e.g. to expand only the non-global
+ *  registers used by the compiler, you can do something like this:
+ *
+ *  #define XCHAL_SA_REG(s,ccused,p...)	SELCC##ccused(p)
+ *  #define SELCC0(p...)
+ *  #define SELCC1(abikind,p...)	SELAK##abikind(p)
+ *  #define SELAK0(p...)		REG(p)
+ *  #define SELAK1(p...)		REG(p)
+ *  #define SELAK2(p...)
+ *  #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \
+ *		...what you want to expand...
+ */
+
+#define XCHAL_NCP_SA_NUM	9
+#define XCHAL_NCP_SA_LIST(s)	\
+ XCHAL_SA_REG(s,1,2,1,1,      threadptr, 4, 4, 4,0x03E7,  ur,231, 32,0,0,0) \
+ XCHAL_SA_REG(s,1,0,0,1,          acclo, 4, 4, 4,0x0210,  sr,16 , 32,0,0,0) \
+ XCHAL_SA_REG(s,1,0,0,1,          acchi, 4, 4, 4,0x0211,  sr,17 ,  8,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             br, 4, 4, 4,0x0204,  sr,4  , 16,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,      scompare1, 4, 4, 4,0x020C,  sr,12 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m0, 4, 4, 4,0x0220,  sr,32 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m1, 4, 4, 4,0x0221,  sr,33 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m2, 4, 4, 4,0x0222,  sr,34 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m3, 4, 4, 4,0x0223,  sr,35 , 32,0,0,0)
+
+#define XCHAL_CP0_SA_NUM	0
+#define XCHAL_CP0_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP1_SA_NUM	18
+#define XCHAL_CP1_SA_LIST(s)	\
+ XCHAL_SA_REG(s,0,0,1,0,     ae_ovf_sar, 8, 4, 4,0x03F0,  ur,240,  7,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,     ae_bithead, 4, 4, 4,0x03F1,  ur,241, 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,ae_ts_fts_bu_bp, 4, 4, 4,0x03F2,  ur,242, 16,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,       ae_sd_no, 4, 4, 4,0x03F3,  ur,243, 28,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,     ae_cbegin0, 4, 4, 4,0x03F6,  ur,246, 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,       ae_cend0, 4, 4, 4,0x03F7,  ur,247, 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep0, 8, 8, 8,0x0060, aep,0  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep1, 8, 8, 8,0x0061, aep,1  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep2, 8, 8, 8,0x0062, aep,2  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep3, 8, 8, 8,0x0063, aep,3  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep4, 8, 8, 8,0x0064, aep,4  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep5, 8, 8, 8,0x0065, aep,5  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep6, 8, 8, 8,0x0066, aep,6  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep7, 8, 8, 8,0x0067, aep,7  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aeq0, 8, 8, 8,0x0068, aeq,0  , 56,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aeq1, 8, 8, 8,0x0069, aeq,1  , 56,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aeq2, 8, 8, 8,0x006A, aeq,2  , 56,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aeq3, 8, 8, 8,0x006B, aeq,3  , 56,0,0,0)
+
+#define XCHAL_CP2_SA_NUM	0
+#define XCHAL_CP2_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP3_SA_NUM	0
+#define XCHAL_CP3_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP4_SA_NUM	0
+#define XCHAL_CP4_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP5_SA_NUM	0
+#define XCHAL_CP5_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP6_SA_NUM	0
+#define XCHAL_CP6_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP7_SA_NUM	0
+#define XCHAL_CP7_SA_LIST(s)	/* empty */
+
+/* Byte length of instruction from its first nibble (op0 field), per FLIX.  */
+#define XCHAL_OP0_FORMAT_LENGTHS	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8
+/* Byte length of instruction from its first byte, per FLIX.  */
+#define XCHAL_BYTE0_FORMAT_LENGTHS	\
+	3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3, 3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,\
+	3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3, 3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,\
+	3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3, 3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,\
+	3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3, 3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,\
+	2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,\
+	2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,\
+	2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,\
+	3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3, 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8
+
+#endif /*_XTENSA_CORE_TIE_H*/
+