summaryrefslogtreecommitdiff
path: root/arch/x86/boot
diff options
context:
space:
mode:
authorKirill A. Shutemov <kirill.shutemov@linux.intel.com>2017-06-06 14:31:25 +0300
committerIngo Molnar <mingo@kernel.org>2017-06-13 08:56:53 +0200
commit34bbb0009f3b7a5eef1ab34f14e5dbf7b8fc389c (patch)
treee05b4b64ec0d1abfed2917f536df77d8ba94c8cf /arch/x86/boot
parent919a02d1280a3845bac70e6b7891ca070f21a60a (diff)
x86/boot/compressed: Enable 5-level paging during decompression stage
We need to cover two basic cases: when bootloader left us in 32-bit mode and when bootloader enabled long mode. The patch implements unified codepath to enabled 5-level paging for both cases. It means case when we start in 32-bit mode, we first enable long mode with 4-level and then switch over to 5-level paging. Switching from 4-level to 5-level paging is not trivial. We cannot do it directly. Setting LA57 in long mode would trigger #GP. So we need to switch off long mode first and the then re-enable with 5-level paging. NOTE: The need of switching off long mode means we are in trouble if bootloader put us above 4G boundary. If bootloader wants to boot 5-level paging kernel, it has to put kernel below 4G or enable 5-level paging on it's own, so we could avoid the step. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20170606113133.22974-7-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Diffstat (limited to 'arch/x86/boot')
-rw-r--r--arch/x86/boot/compressed/head_64.S86
1 files changed, 85 insertions, 1 deletions
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index d2ae1f821e0c..fbf4c32d0b62 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -346,6 +346,48 @@ preferred_addr:
/* Set up the stack */
leaq boot_stack_end(%rbx), %rsp
+#ifdef CONFIG_X86_5LEVEL
+ /* Check if 5-level paging has already enabled */
+ movq %cr4, %rax
+ testl $X86_CR4_LA57, %eax
+ jnz lvl5
+
+ /*
+ * At this point we are in long mode with 4-level paging enabled,
+ * but we want to enable 5-level paging.
+ *
+ * The problem is that we cannot do it directly. Setting LA57 in
+ * long mode would trigger #GP. So we need to switch off long mode
+ * first.
+ *
+ * NOTE: This is not going to work if bootloader put us above 4G
+ * limit.
+ *
+ * The first step is go into compatibility mode.
+ */
+
+ /* Clear additional page table */
+ leaq lvl5_pgtable(%rbx), %rdi
+ xorq %rax, %rax
+ movq $(PAGE_SIZE/8), %rcx
+ rep stosq
+
+ /*
+ * Setup current CR3 as the first and only entry in a new top level
+ * page table.
+ */
+ movq %cr3, %rdi
+ leaq 0x7 (%rdi), %rax
+ movq %rax, lvl5_pgtable(%rbx)
+
+ /* Switch to compatibility mode (CS.L = 0 CS.D = 1) via far return */
+ pushq $__KERNEL32_CS
+ leaq compatible_mode(%rip), %rax
+ pushq %rax
+ lretq
+lvl5:
+#endif
+
/* Zero EFLAGS */
pushq $0
popfq
@@ -429,6 +471,44 @@ relocated:
jmp *%rax
.code32
+#ifdef CONFIG_X86_5LEVEL
+compatible_mode:
+ /* Setup data and stack segments */
+ movl $__KERNEL_DS, %eax
+ movl %eax, %ds
+ movl %eax, %ss
+
+ /* Disable paging */
+ movl %cr0, %eax
+ btrl $X86_CR0_PG_BIT, %eax
+ movl %eax, %cr0
+
+ /* Point CR3 to 5-level paging */
+ leal lvl5_pgtable(%ebx), %eax
+ movl %eax, %cr3
+
+ /* Enable PAE and LA57 mode */
+ movl %cr4, %eax
+ orl $(X86_CR4_PAE | X86_CR4_LA57), %eax
+ movl %eax, %cr4
+
+ /* Calculate address we are running at */
+ call 1f
+1: popl %edi
+ subl $1b, %edi
+
+ /* Prepare stack for far return to Long Mode */
+ pushl $__KERNEL_CS
+ leal lvl5(%edi), %eax
+ push %eax
+
+ /* Enable paging back */
+ movl $(X86_CR0_PG | X86_CR0_PE), %eax
+ movl %eax, %cr0
+
+ lret
+#endif
+
no_longmode:
/* This isn't an x86-64 CPU so hang */
1:
@@ -442,7 +522,7 @@ gdt:
.word gdt_end - gdt
.long gdt
.word 0
- .quad 0x0000000000000000 /* NULL descriptor */
+ .quad 0x00cf9a000000ffff /* __KERNEL32_CS */
.quad 0x00af9a000000ffff /* __KERNEL_CS */
.quad 0x00cf92000000ffff /* __KERNEL_DS */
.quad 0x0080890000000000 /* TS descriptor */
@@ -486,3 +566,7 @@ boot_stack_end:
.balign 4096
pgtable:
.fill BOOT_PGT_SIZE, 1, 0
+#ifdef CONFIG_X86_5LEVEL
+lvl5_pgtable:
+ .fill PAGE_SIZE, 1, 0
+#endif