Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support SPI based w5100 devices, from Akinobu Mita.

   2) Partial Segmentation Offload, from Alexander Duyck.

   3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE.

   4) Allow cls_flower stats offload, from Amir Vadai.

   5) Implement bpf blinding, from Daniel Borkmann.

   6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is
      actually using FASYNC these atomics are superfluous.  From Eric
      Dumazet.

   7) Run TCP more preemptibly, also from Eric Dumazet.

   8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e
      driver, from Gal Pressman.

   9) Allow creating ppp devices via rtnetlink, from Guillaume Nault.

  10) Improve BPF usage documentation, from Jesper Dangaard Brouer.

  11) Support tunneling offloads in qed, from Manish Chopra.

  12) aRFS offloading in mlx5e, from Maor Gottlieb.

  13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo
      Leitner.

  14) Add MSG_EOR support to TCP, this allows controlling packet
      coalescing on application record boundaries for more accurate
      socket timestamp sampling.  From Martin KaFai Lau.

  15) Fix alignment of 64-bit netlink attributes across the board, from
      Nicolas Dichtel.

  16) Per-vlan stats in bridging, from Nikolay Aleksandrov.

  17) Several conversions of drivers to ethtool ksettings, from Philippe
      Reynes.

  18) Checksum neutral ILA in ipv6, from Tom Herbert.

  19) Factorize all of the various marvell dsa drivers into one, from
      Vivien Didelot

  20) Add VF support to qed driver, from Yuval Mintz"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits)
  Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m"
  Revert "phy dp83867: Make rgmii parameters optional"
  r8169: default to 64-bit DMA on recent PCIe chips
  phy dp83867: Make rgmii parameters optional
  phy dp83867: Fix compilation with CONFIG_OF_MDIO=m
  bpf: arm64: remove callee-save registers use for tmp registers
  asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions
  switchdev: pass pointer to fib_info instead of copy
  net_sched: close another race condition in tcf_mirred_release()
  tipc: fix nametable publication field in nl compat
  drivers: net: Don't print unpopulated net_device name
  qed: add support for dcbx.
  ravb: Add missing free_irq() calls to ravb_close()
  qed: Remove a stray tab
  net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings
  net: ethernet: fec-mpc52xx: use phydev from struct net_device
  bpf, doc: fix typo on bpf_asm descriptions
  stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set
  net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings
  net: ethernet: fs-enet: use phydev from struct net_device
  ...

2 files changed, 60 insertions, 19 deletions

diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index bf24ab188921..a883981c0174 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -126,7 +126,7 @@ config S390
 	select HAVE_ARCH_SOFT_DIRTY
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
-	select HAVE_BPF_JIT if PACK_STACK && HAVE_MARCH_Z196_FEATURES
+	select HAVE_EBPF_JIT if PACK_STACK && HAVE_MARCH_Z196_FEATURES
 	select HAVE_CMPXCHG_DOUBLE
 	select HAVE_CMPXCHG_LOCAL
 	select HAVE_DEBUG_KMEMLEAK
diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index 3c0bfc1f2694..9133b0ec000b 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -54,16 +54,17 @@ struct bpf_jit {
 #define SEEN_FUNC	16	/* calls C functions */
 #define SEEN_TAIL_CALL	32	/* code uses tail calls */
 #define SEEN_SKB_CHANGE	64	/* code changes skb data */
+#define SEEN_REG_AX	128	/* code uses constant blinding */
 #define SEEN_STACK	(SEEN_FUNC | SEEN_MEM | SEEN_SKB)
 
 /*
  * s390 registers
  */
-#define REG_W0		(__MAX_BPF_REG+0)	/* Work register 1 (even) */
-#define REG_W1		(__MAX_BPF_REG+1)	/* Work register 2 (odd) */
-#define REG_SKB_DATA	(__MAX_BPF_REG+2)	/* SKB data register */
-#define REG_L		(__MAX_BPF_REG+3)	/* Literal pool register */
-#define REG_15		(__MAX_BPF_REG+4)	/* Register 15 */
+#define REG_W0		(MAX_BPF_JIT_REG + 0)	/* Work register 1 (even) */
+#define REG_W1		(MAX_BPF_JIT_REG + 1)	/* Work register 2 (odd) */
+#define REG_SKB_DATA	(MAX_BPF_JIT_REG + 2)	/* SKB data register */
+#define REG_L		(MAX_BPF_JIT_REG + 3)	/* Literal pool register */
+#define REG_15		(MAX_BPF_JIT_REG + 4)	/* Register 15 */
 #define REG_0		REG_W0			/* Register 0 */
 #define REG_1		REG_W1			/* Register 1 */
 #define REG_2		BPF_REG_1		/* Register 2 */
@@ -88,6 +89,8 @@ static const int reg2hex[] = {
 	[BPF_REG_9]	= 10,
 	/* BPF stack pointer */
 	[BPF_REG_FP]	= 13,
+	/* Register for blinding (shared with REG_SKB_DATA) */
+	[BPF_REG_AX]	= 12,
 	/* SKB data pointer */
 	[REG_SKB_DATA]	= 12,
 	/* Work registers for s390x backend */
@@ -385,7 +388,7 @@ static void save_restore_regs(struct bpf_jit *jit, int op)
 /*
  * For SKB access %b1 contains the SKB pointer. For "bpf_jit.S"
  * we store the SKB header length on the stack and the SKB data
- * pointer in REG_SKB_DATA.
+ * pointer in REG_SKB_DATA if BPF_REG_AX is not used.
  */
 static void emit_load_skb_data_hlen(struct bpf_jit *jit)
 {
@@ -397,9 +400,10 @@ static void emit_load_skb_data_hlen(struct bpf_jit *jit)
 		   offsetof(struct sk_buff, data_len));
 	/* stg %w1,ST_OFF_HLEN(%r0,%r15) */
 	EMIT6_DISP_LH(0xe3000000, 0x0024, REG_W1, REG_0, REG_15, STK_OFF_HLEN);
-	/* lg %skb_data,data_off(%b1) */
-	EMIT6_DISP_LH(0xe3000000, 0x0004, REG_SKB_DATA, REG_0,
-		      BPF_REG_1, offsetof(struct sk_buff, data));
+	if (!(jit->seen & SEEN_REG_AX))
+		/* lg %skb_data,data_off(%b1) */
+		EMIT6_DISP_LH(0xe3000000, 0x0004, REG_SKB_DATA, REG_0,
+			      BPF_REG_1, offsetof(struct sk_buff, data));
 }
 
 /*
@@ -487,6 +491,8 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
 	s32 imm = insn->imm;
 	s16 off = insn->off;
 
+	if (dst_reg == BPF_REG_AX || src_reg == BPF_REG_AX)
+		jit->seen |= SEEN_REG_AX;
 	switch (insn->code) {
 	/*
 	 * BPF_MOV
@@ -1188,7 +1194,7 @@ call_fn:
 		/*
 		 * Implicit input:
 		 *  BPF_REG_6	 (R7) : skb pointer
-		 *  REG_SKB_DATA (R12): skb data pointer
+		 *  REG_SKB_DATA (R12): skb data pointer (if no BPF_REG_AX)
 		 *
 		 * Calculated input:
 		 *  BPF_REG_2	 (R3) : offset of byte(s) to fetch in skb
@@ -1209,6 +1215,11 @@ call_fn:
 			/* agfr %b2,%src (%src is s32 here) */
 			EMIT4(0xb9180000, BPF_REG_2, src_reg);
 
+		/* Reload REG_SKB_DATA if BPF_REG_AX is used */
+		if (jit->seen & SEEN_REG_AX)
+			/* lg %skb_data,data_off(%b6) */
+			EMIT6_DISP_LH(0xe3000000, 0x0004, REG_SKB_DATA, REG_0,
+				      BPF_REG_6, offsetof(struct sk_buff, data));
 		/* basr %b5,%w1 (%b5 is call saved) */
 		EMIT2(0x0d00, BPF_REG_5, REG_W1);
 
@@ -1262,37 +1273,62 @@ void bpf_jit_compile(struct bpf_prog *fp)
 /*
  * Compile eBPF program "fp"
  */
-void bpf_int_jit_compile(struct bpf_prog *fp)
+struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 {
+	struct bpf_prog *tmp, *orig_fp = fp;
 	struct bpf_binary_header *header;
+	bool tmp_blinded = false;
 	struct bpf_jit jit;
 	int pass;
 
 	if (!bpf_jit_enable)
-		return;
+		return orig_fp;
+
+	tmp = bpf_jit_blind_constants(fp);
+	/*
+	 * If blinding was requested and we failed during blinding,
+	 * we must fall back to the interpreter.
+	 */
+	if (IS_ERR(tmp))
+		return orig_fp;
+	if (tmp != fp) {
+		tmp_blinded = true;
+		fp = tmp;
+	}
+
 	memset(&jit, 0, sizeof(jit));
 	jit.addrs = kcalloc(fp->len + 1, sizeof(*jit.addrs), GFP_KERNEL);
-	if (jit.addrs == NULL)
-		return;
+	if (jit.addrs == NULL) {
+		fp = orig_fp;
+		goto out;
+	}
 	/*
 	 * Three initial passes:
 	 *   - 1/2: Determine clobbered registers
 	 *   - 3:   Calculate program size and addrs arrray
 	 */
 	for (pass = 1; pass <= 3; pass++) {
-		if (bpf_jit_prog(&jit, fp))
+		if (bpf_jit_prog(&jit, fp)) {
+			fp = orig_fp;
 			goto free_addrs;
+		}
 	}
 	/*
 	 * Final pass: Allocate and generate program
 	 */
-	if (jit.size >= BPF_SIZE_MAX)
+	if (jit.size >= BPF_SIZE_MAX) {
+		fp = orig_fp;
 		goto free_addrs;
+	}
 	header = bpf_jit_binary_alloc(jit.size, &jit.prg_buf, 2, jit_fill_hole);
-	if (!header)
+	if (!header) {
+		fp = orig_fp;
 		goto free_addrs;
-	if (bpf_jit_prog(&jit, fp))
+	}
+	if (bpf_jit_prog(&jit, fp)) {
+		fp = orig_fp;
 		goto free_addrs;
+	}
 	if (bpf_jit_enable > 1) {
 		bpf_jit_dump(fp->len, jit.size, pass, jit.prg_buf);
 		if (jit.prg_buf)
@@ -1305,6 +1341,11 @@ void bpf_int_jit_compile(struct bpf_prog *fp)
 	}
 free_addrs:
 	kfree(jit.addrs);
+out:
+	if (tmp_blinded)
+		bpf_jit_prog_release_other(fp, fp == orig_fp ?
+					   tmp : orig_fp);
+	return fp;
 }
 
 /*