Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull main powerpc updates from Ben Herrenschmidt:
 "This time around, the powerpc merges are going to be a little bit more
  complicated than usual.

  This is the main pull request with most of the work for this merge
  window.  I will describe it a bit more further down.

  There is some additional cpuidle driver work, however I haven't
  included it in this tree as it depends on some work in tip/timer-core
  which Thomas accidentally forgot to put in a topic branch.  Since I
  didn't want to carry all of that tip timer stuff in powerpc -next, I
  setup a separate branch on top of Thomas tree with just that cpuidle
  driver in it, and Stephen has been carrying that in next separately
  for a while now.  I'll send a separate pull request for it.

  Additionally, two new pieces in this tree add users for a sysfs API
  that Tejun and Greg have been deprecating in drivers-core-next.
  Thankfully Greg reverted the patch that removes the old API so this
  merge can happen cleanly, but once merged, I will send a patch
  adjusting our new code to the new API so that Greg can send you the
  removal patch.

  Now as for the content of this branch, we have a lot of perf work for
  power8 new counters including support for our new "nest" counters
  (also called 24x7) under pHyp (not natively yet).

  We have new functionality when running under the OPAL firmware
  (non-virtualized or KVM host), such as access to the firmware error
  logs and service processor dumps, system parameters and sensors, along
  with a hwmon driver for the latter.

  There's also a bunch of bug fixes accross the board, some LE fixes,
  and a nice set of selftests for validating our various types of copy
  loops.

  On the Freescale side, we see mostly new chip/board revisions, some
  clock updates, better support for machine checks and debug exceptions,
  etc..."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (70 commits)
  powerpc/book3s: Fix CFAR clobbering issue in machine check handler.
  powerpc/compat: 32-bit little endian machine name is ppcle, not ppc
  powerpc/le: Big endian arguments for ppc_rtas()
  powerpc: Use default set of netfilter modules (CONFIG_NETFILTER_ADVANCED=n)
  powerpc/defconfigs: Enable THP in pseries defconfig
  powerpc/mm: Make sure a local_irq_disable prevent a parallel THP split
  powerpc: Rate-limit users spamming kernel log buffer
  powerpc/perf: Fix handling of L3 events with bank == 1
  powerpc/perf/hv_{gpci, 24x7}: Add documentation of device attributes
  powerpc/perf: Add kconfig option for hypervisor provided counters
  powerpc/perf: Add support for the hv 24x7 interface
  powerpc/perf: Add support for the hv gpci (get performance counter info) interface
  powerpc/perf: Add macros for defining event fields & formats
  powerpc/perf: Add a shared interface to get gpci version and capabilities
  powerpc/perf: Add 24x7 interface headers
  powerpc/perf: Add hv_gpci interface header
  powerpc: Add hvcalls for 24x7 and gpci (Get Performance Counter Info)
  sysfs: create bin_attributes under the requested group
  powerpc/perf: Enable BHRB access for EBB events
  powerpc/perf: Add BHRB constraint and IFM MMCRA handling for EBB
  ...

35 files changed, 1679 insertions, 238 deletions

diff --git a/arch/powerpc/platforms/85xx/c293pcie.c b/arch/powerpc/platforms/85xx/c293pcie.c
index 213d5b815827..84476b646005 100644
--- a/arch/powerpc/platforms/85xx/c293pcie.c
+++ b/arch/powerpc/platforms/85xx/c293pcie.c
@@ -68,6 +68,7 @@ define_machine(c293_pcie) {
 	.init_IRQ		= c293_pcie_pic_init,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c
index 3b085c7ee539..b564b5e23f7c 100644
--- a/arch/powerpc/platforms/85xx/common.c
+++ b/arch/powerpc/platforms/85xx/common.c
@@ -107,6 +107,12 @@ void __init mpc85xx_qe_init(void)
 	qe_reset();
 	of_node_put(np);
 
+}
+
+void __init mpc85xx_qe_par_io_init(void)
+{
+	struct device_node *np;
+
 	np = of_find_node_by_name(NULL, "par_io");
 	if (np) {
 		struct device_node *ucc;
diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
index fbd871e69754..8e4b1e1a4911 100644
--- a/arch/powerpc/platforms/85xx/corenet_generic.c
+++ b/arch/powerpc/platforms/85xx/corenet_generic.c
@@ -26,11 +26,13 @@
 #include <asm/udbg.h>
 #include <asm/mpic.h>
 #include <asm/ehv_pic.h>
+#include <asm/qe_ic.h>
 
 #include <linux/of_platform.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include "smp.h"
+#include "mpc85xx.h"
 
 void __init corenet_gen_pic_init(void)
 {
@@ -38,6 +40,8 @@ void __init corenet_gen_pic_init(void)
 	unsigned int flags = MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU |
 		MPIC_NO_RESET;
 
+	struct device_node *np;
+
 	if (ppc_md.get_irq == mpic_get_coreint_irq)
 		flags |= MPIC_ENABLE_COREINT;
 
@@ -45,6 +49,13 @@ void __init corenet_gen_pic_init(void)
 	BUG_ON(mpic == NULL);
 
 	mpic_init(mpic);
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+	if (np) {
+		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
+				qe_ic_cascade_high_mpic);
+		of_node_put(np);
+	}
 }
 
 /*
@@ -57,6 +68,8 @@ void __init corenet_gen_setup_arch(void)
 	swiotlb_detect_4g();
 
 	pr_info("%s board from Freescale Semiconductor\n", ppc_md.name);
+
+	mpc85xx_qe_init();
 }
 
 static const struct of_device_id of_device_ids[] = {
@@ -81,6 +94,9 @@ static const struct of_device_id of_device_ids[] = {
 	{
 		.compatible	= "fsl,qoriq-pcie-v3.0",
 	},
+	{
+		.compatible	= "fsl,qe",
+	},
 	/* The following two are for the Freescale hypervisor */
 	{
 		.name		= "hypervisor",
@@ -163,6 +179,7 @@ define_machine(corenet_generic) {
 	.init_IRQ		= corenet_gen_pic_init,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_coreint_irq,
 	.restart		= fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/85xx/ge_imp3a.c b/arch/powerpc/platforms/85xx/ge_imp3a.c
index e6285ae6f423..11790e074c8a 100644
--- a/arch/powerpc/platforms/85xx/ge_imp3a.c
+++ b/arch/powerpc/platforms/85xx/ge_imp3a.c
@@ -215,6 +215,7 @@ define_machine(ge_imp3a) {
 	.show_cpuinfo		= ge_imp3a_show_cpuinfo,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index 15ce4b55f117..a378ba3519e9 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -76,6 +76,7 @@ define_machine(mpc8536_ds) {
 	.init_IRQ		= mpc8536_ds_pic_init,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/85xx/mpc85xx.h b/arch/powerpc/platforms/85xx/mpc85xx.h
index fc51dd4092e5..39056f6befeb 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx.h
+++ b/arch/powerpc/platforms/85xx/mpc85xx.h
@@ -10,8 +10,10 @@ static inline void __init mpc85xx_cpm2_pic_init(void) {}
 
 #ifdef CONFIG_QUICC_ENGINE
 extern void mpc85xx_qe_init(void);
+extern void mpc85xx_qe_par_io_init(void);
 #else
 static inline void __init mpc85xx_qe_init(void) {}
+static inline void __init mpc85xx_qe_par_io_init(void) {}
 #endif
 
 #endif
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 7a31a0e1df29..b0753e222086 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -385,6 +385,7 @@ define_machine(mpc85xx_cds) {
 #ifdef CONFIG_PCI
 	.restart	= mpc85xx_cds_restart,
 	.pcibios_fixup_bus	= mpc85xx_cds_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #else
 	.restart	= fsl_rstcr_restart,
 #endif
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 9ebb91ed96a3..ffdf02121a7c 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -209,6 +209,7 @@ define_machine(mpc8544_ds) {
 	.init_IRQ		= mpc85xx_ds_pic_init,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
@@ -223,6 +224,7 @@ define_machine(mpc8572_ds) {
 	.init_IRQ		= mpc85xx_ds_pic_init,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
@@ -237,6 +239,7 @@ define_machine(p2020_ds) {
 	.init_IRQ		= mpc85xx_ds_pic_init,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 34f3c5eb3bee..a392e94a07fa 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -239,6 +239,7 @@ static void __init mpc85xx_mds_qe_init(void)
 	struct device_node *np;
 
 	mpc85xx_qe_init();
+	mpc85xx_qe_par_io_init();
 	mpc85xx_mds_reset_ucc_phys();
 
 	if (machine_is(p1021_mds)) {
@@ -391,6 +392,7 @@ define_machine(mpc8568_mds) {
 	.progress	= udbg_progress,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 };
 
@@ -412,6 +414,7 @@ define_machine(mpc8569_mds) {
 	.progress	= udbg_progress,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 };
 
@@ -434,6 +437,7 @@ define_machine(p1021_mds) {
 	.progress	= udbg_progress,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 };
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index e15bdd18fdb2..e358bed66d01 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -86,10 +86,6 @@ void __init mpc85xx_rdb_pic_init(void)
  */
 static void __init mpc85xx_rdb_setup_arch(void)
 {
-#ifdef CONFIG_QUICC_ENGINE
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc85xx_rdb_setup_arch()", 0);
 
@@ -99,8 +95,10 @@ static void __init mpc85xx_rdb_setup_arch(void)
 
 #ifdef CONFIG_QUICC_ENGINE
 	mpc85xx_qe_init();
+	mpc85xx_qe_par_io_init();
 #if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE)
 	if (machine_is(p1025_rdb)) {
+		struct device_node *np;
 
 		struct ccsr_guts __iomem *guts;
 
@@ -233,6 +231,7 @@ define_machine(p2020_rdb) {
 	.init_IRQ		= mpc85xx_rdb_pic_init,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
@@ -247,6 +246,7 @@ define_machine(p1020_rdb) {
 	.init_IRQ		= mpc85xx_rdb_pic_init,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
@@ -261,6 +261,7 @@ define_machine(p1021_rdb_pc) {
 	.init_IRQ		= mpc85xx_rdb_pic_init,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
@@ -275,6 +276,7 @@ define_machine(p2020_rdb_pc) {
 	.init_IRQ		= mpc85xx_rdb_pic_init,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
@@ -289,6 +291,7 @@ define_machine(p1025_rdb) {
 	.init_IRQ		= mpc85xx_rdb_pic_init,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
@@ -303,6 +306,7 @@ define_machine(p1020_mbg_pc) {
 	.init_IRQ		= mpc85xx_rdb_pic_init,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
@@ -317,6 +321,7 @@ define_machine(p1020_utm_pc) {
 	.init_IRQ		= mpc85xx_rdb_pic_init,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
@@ -331,6 +336,7 @@ define_machine(p1020_rdb_pc) {
 	.init_IRQ		= mpc85xx_rdb_pic_init,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
@@ -345,6 +351,7 @@ define_machine(p1020_rdb_pd) {
 	.init_IRQ		= mpc85xx_rdb_pic_init,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
@@ -359,6 +366,7 @@ define_machine(p1024_rdb) {
 	.init_IRQ		= mpc85xx_rdb_pic_init,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/85xx/p1010rdb.c b/arch/powerpc/platforms/85xx/p1010rdb.c
index d6a3dd311494..ad1a3d438a9e 100644
--- a/arch/powerpc/platforms/85xx/p1010rdb.c
+++ b/arch/powerpc/platforms/85xx/p1010rdb.c
@@ -78,6 +78,7 @@ define_machine(p1010_rdb) {
 	.init_IRQ		= p1010_rdb_pic_init,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index e611e79f23ce..6ac986d3f8a3 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -567,6 +567,7 @@ define_machine(p1022_ds) {
 	.init_IRQ		= p1022_ds_pic_init,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb	= fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/85xx/p1022_rdk.c b/arch/powerpc/platforms/85xx/p1022_rdk.c
index 8c9297112b30..7a180f0308d5 100644
--- a/arch/powerpc/platforms/85xx/p1022_rdk.c
+++ b/arch/powerpc/platforms/85xx/p1022_rdk.c
@@ -147,6 +147,7 @@ define_machine(p1022_rdk) {
 	.init_IRQ		= p1022_rdk_pic_init,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/85xx/p1023_rds.c b/arch/powerpc/platforms/85xx/p1023_rds.c
index 2ae9d490c3d9..0e614007acfb 100644
--- a/arch/powerpc/platforms/85xx/p1023_rds.c
+++ b/arch/powerpc/platforms/85xx/p1023_rds.c
@@ -126,6 +126,7 @@ define_machine(p1023_rds) {
 	.progress		= udbg_progress,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 };
 
@@ -140,5 +141,6 @@ define_machine(p1023_rdb) {
 	.progress		= udbg_progress,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 };
diff --git a/arch/powerpc/platforms/85xx/qemu_e500.c b/arch/powerpc/platforms/85xx/qemu_e500.c
index 5cefc5a9a144..7f2673293549 100644
--- a/arch/powerpc/platforms/85xx/qemu_e500.c
+++ b/arch/powerpc/platforms/85xx/qemu_e500.c
@@ -66,6 +66,7 @@ define_machine(qemu_e500) {
 	.init_IRQ		= qemu_e500_pic_init,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_coreint_irq,
 	.restart		= fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/85xx/sbc8548.c b/arch/powerpc/platforms/85xx/sbc8548.c
index f62121825914..b07214666d65 100644
--- a/arch/powerpc/platforms/85xx/sbc8548.c
+++ b/arch/powerpc/platforms/85xx/sbc8548.c
@@ -135,6 +135,7 @@ define_machine(sbc8548) {
 	.restart	= fsl_rstcr_restart,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.calibrate_decr = generic_calibrate_decr,
 	.progress	= udbg_progress,
diff --git a/arch/powerpc/platforms/85xx/twr_p102x.c b/arch/powerpc/platforms/85xx/twr_p102x.c
index c25ff10f05ee..1eadb6d0dc64 100644
--- a/arch/powerpc/platforms/85xx/twr_p102x.c
+++ b/arch/powerpc/platforms/85xx/twr_p102x.c
@@ -77,6 +77,7 @@ static void __init twr_p1025_setup_arch(void)
 
 #ifdef CONFIG_QUICC_ENGINE
 	mpc85xx_qe_init();
+	mpc85xx_qe_par_io_init();
 
 #if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE)
 	if (machine_is(twr_p1025)) {
diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
index dcbf7e42dce7..1a9c1085855f 100644
--- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c
+++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -170,6 +170,7 @@ define_machine(xes_mpc8572) {
 	.init_IRQ		= xes_mpc85xx_pic_init,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
@@ -184,6 +185,7 @@ define_machine(xes_mpc8548) {
 	.init_IRQ		= xes_mpc85xx_pic_init,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
@@ -198,6 +200,7 @@ define_machine(xes_mpc8540) {
 	.init_IRQ		= xes_mpc85xx_pic_init,
 #ifdef CONFIG_PCI
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 6d3c7a9fd047..2a7024d8d8b1 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -34,7 +34,6 @@ config MPC7448HPC2
 	select TSI108_BRIDGE
 	select DEFAULT_UIMAGE
 	select PPC_UDBG_16550
-	select TSI108_BRIDGE
 	help
 	  Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
 	  platform
@@ -44,19 +43,10 @@ config PPC_HOLLY
 	depends on EMBEDDED6xx
 	select TSI108_BRIDGE
 	select PPC_UDBG_16550
-	select TSI108_BRIDGE
 	help
 	  Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval
 	  Board with TSI108/9 bridge (Hickory/Holly)
 
-config PPC_PRPMC2800
-	bool "Motorola-PrPMC2800"
-	depends on EMBEDDED6xx
-	select MV64X60
-	select NOT_COHERENT_CACHE
-	help
-	  This option enables support for the Motorola PrPMC2800 board
-
 config PPC_C2K
 	bool "SBS/GEFanuc C2K board"
 	depends on EMBEDDED6xx
diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile
index cdd48d402b93..f126a2a09981 100644
--- a/arch/powerpc/platforms/embedded6xx/Makefile
+++ b/arch/powerpc/platforms/embedded6xx/Makefile
@@ -5,7 +5,6 @@ obj-$(CONFIG_MPC7448HPC2)	+= mpc7448_hpc2.o
 obj-$(CONFIG_LINKSTATION)	+= linkstation.o ls_uart.o
 obj-$(CONFIG_STORCENTER)	+= storcenter.o
 obj-$(CONFIG_PPC_HOLLY)		+= holly.o
-obj-$(CONFIG_PPC_PRPMC2800)	+= prpmc2800.o
 obj-$(CONFIG_PPC_C2K)		+= c2k.o
 obj-$(CONFIG_USBGECKO_UDBG)	+= usbgecko_udbg.o
 obj-$(CONFIG_GAMECUBE_COMMON)	+= flipper-pic.o
diff --git a/arch/powerpc/platforms/embedded6xx/prpmc2800.c b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
deleted file mode 100644
index d455f08bea53..000000000000
--- a/arch/powerpc/platforms/embedded6xx/prpmc2800.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Board setup routines for the Motorola PrPMC2800
- *
- * Author: Dale Farnsworth <dale@farnsworth.org>
- *
- * 2007 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/seq_file.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/time.h>
-
-#include <mm/mmu_decl.h>
-
-#include <sysdev/mv64x60.h>
-
-#define MV64x60_MPP_CNTL_0	0x0000
-#define MV64x60_MPP_CNTL_2	0x0008
-
-#define MV64x60_GPP_IO_CNTL	0x0000
-#define MV64x60_GPP_LEVEL_CNTL	0x0010
-#define MV64x60_GPP_VALUE_SET	0x0018
-
-#define PLATFORM_NAME_MAX	32
-
-static char prpmc2800_platform_name[PLATFORM_NAME_MAX];
-
-static void __iomem *mv64x60_mpp_reg_base;
-static void __iomem *mv64x60_gpp_reg_base;
-
-static void __init prpmc2800_setup_arch(void)
-{
-	struct device_node *np;
-	phys_addr_t paddr;
-	const unsigned int *reg;
-
-	/*
-	 * ioremap mpp and gpp registers in case they are later
-	 * needed by prpmc2800_reset_board().
-	 */
-	np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-mpp");
-	reg = of_get_property(np, "reg", NULL);
-	paddr = of_translate_address(np, reg);
-	of_node_put(np);
-	mv64x60_mpp_reg_base = ioremap(paddr, reg[1]);
-
-	np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
-	reg = of_get_property(np, "reg", NULL);
-	paddr = of_translate_address(np, reg);
-	of_node_put(np);
-	mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
-
-#ifdef CONFIG_PCI
-	mv64x60_pci_init();
-#endif
-
-	printk("Motorola %s\n", prpmc2800_platform_name);
-}
-
-static void prpmc2800_reset_board(void)
-{
-	u32 temp;
-
-	local_irq_disable();
-
-	temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0);
-	temp &= 0xFFFF0FFF;
-	out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0, temp);
-
-	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
-	temp |= 0x00000004;
-	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
-
-	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
-	temp |= 0x00000004;
-	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
-
-	temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2);
-	temp &= 0xFFFF0FFF;
-	out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2, temp);
-
-	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
-	temp |= 0x00080000;
-	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
-
-	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
-	temp |= 0x00080000;
-	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
-
-	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_VALUE_SET, 0x00080004);
-}
-
-static void prpmc2800_restart(char *cmd)
-{
-	volatile ulong i = 10000000;
-
-	prpmc2800_reset_board();
-
-	while (i-- > 0);
-	panic("restart failed\n");
-}
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-#define PPRPM2800_COHERENCY_SETTING "off"
-#else
-#define PPRPM2800_COHERENCY_SETTING "on"
-#endif
-
-void prpmc2800_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "Vendor\t\t: Motorola\n");
-	seq_printf(m, "coherency\t: %s\n", PPRPM2800_COHERENCY_SETTING);
-}
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init prpmc2800_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-	unsigned long len = PLATFORM_NAME_MAX;
-	void *m;
-
-	if (!of_flat_dt_is_compatible(root, "motorola,PrPMC2800"))
-		return 0;
-
-	/* Update ppc_md.name with name from dt */
-	m = of_get_flat_dt_prop(root, "model", &len);
-	if (m)
-		strncpy(prpmc2800_platform_name, m,
-			min((int)len, PLATFORM_NAME_MAX - 1));
-
-	_set_L2CR(_get_L2CR() | L2CR_L2E);
-	return 1;
-}
-
-define_machine(prpmc2800){
-	.name			= prpmc2800_platform_name,
-	.probe			= prpmc2800_probe,
-	.setup_arch		= prpmc2800_setup_arch,
-	.init_early		= mv64x60_init_early,
-	.show_cpuinfo		= prpmc2800_show_cpuinfo,
-	.init_IRQ		= mv64x60_init_irq,
-	.get_irq		= mv64x60_get_irq,
-	.restart		= prpmc2800_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 8d767fde5a6a..f324ea099503 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -1,6 +1,6 @@
-obj-y			+= setup.o opal-takeover.o opal-wrappers.o opal.o
+obj-y			+= setup.o opal-takeover.o opal-wrappers.o opal.o opal-async.o
 obj-y			+= opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
-obj-y			+= rng.o
+obj-y			+= rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o
 
 obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_PCI)	+= pci.o pci-p5ioc2.o pci-ioda.o
diff --git a/arch/powerpc/platforms/powernv/opal-async.c b/arch/powerpc/platforms/powernv/opal-async.c
new file mode 100644
index 000000000000..cd0c1354d404
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-async.c
@@ -0,0 +1,203 @@
+/*
+ * PowerNV OPAL asynchronous completion interfaces
+ *
+ * Copyright 2013 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/gfp.h>
+#include <linux/of.h>
+#include <asm/opal.h>
+
+#define N_ASYNC_COMPLETIONS	64
+
+static DECLARE_BITMAP(opal_async_complete_map, N_ASYNC_COMPLETIONS) = {~0UL};
+static DECLARE_BITMAP(opal_async_token_map, N_ASYNC_COMPLETIONS);
+static DECLARE_WAIT_QUEUE_HEAD(opal_async_wait);
+static DEFINE_SPINLOCK(opal_async_comp_lock);
+static struct semaphore opal_async_sem;
+static struct opal_msg *opal_async_responses;
+static unsigned int opal_max_async_tokens;
+
+int __opal_async_get_token(void)
+{
+	unsigned long flags;
+	int token;
+
+	spin_lock_irqsave(&opal_async_comp_lock, flags);
+	token = find_first_bit(opal_async_complete_map, opal_max_async_tokens);
+	if (token >= opal_max_async_tokens) {
+		token = -EBUSY;
+		goto out;
+	}
+
+	if (__test_and_set_bit(token, opal_async_token_map)) {
+		token = -EBUSY;
+		goto out;
+	}
+
+	__clear_bit(token, opal_async_complete_map);
+
+out:
+	spin_unlock_irqrestore(&opal_async_comp_lock, flags);
+	return token;
+}
+
+int opal_async_get_token_interruptible(void)
+{
+	int token;
+
+	/* Wait until a token is available */
+	if (down_interruptible(&opal_async_sem))
+		return -ERESTARTSYS;
+
+	token = __opal_async_get_token();
+	if (token < 0)
+		up(&opal_async_sem);
+
+	return token;
+}
+
+int __opal_async_release_token(int token)
+{
+	unsigned long flags;
+
+	if (token < 0 || token >= opal_max_async_tokens) {
+		pr_err("%s: Passed token is out of range, token %d\n",
+				__func__, token);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&opal_async_comp_lock, flags);
+	__set_bit(token, opal_async_complete_map);
+	__clear_bit(token, opal_async_token_map);
+	spin_unlock_irqrestore(&opal_async_comp_lock, flags);
+
+	return 0;
+}
+
+int opal_async_release_token(int token)
+{
+	int ret;
+
+	ret = __opal_async_release_token(token);
+	if (ret)
+		return ret;
+
+	up(&opal_async_sem);
+
+	return 0;
+}
+
+int opal_async_wait_response(uint64_t token, struct opal_msg *msg)
+{
+	if (token >= opal_max_async_tokens) {
+		pr_err("%s: Invalid token passed\n", __func__);
+		return -EINVAL;
+	}
+
+	if (!msg) {
+		pr_err("%s: Invalid message pointer passed\n", __func__);
+		return -EINVAL;
+	}
+
+	wait_event(opal_async_wait, test_bit(token, opal_async_complete_map));
+	memcpy(msg, &opal_async_responses[token], sizeof(*msg));
+
+	return 0;
+}
+
+static int opal_async_comp_event(struct notifier_block *nb,
+		unsigned long msg_type, void *msg)
+{
+	struct opal_msg *comp_msg = msg;
+	unsigned long flags;
+
+	if (msg_type != OPAL_MSG_ASYNC_COMP)
+		return 0;
+
+	memcpy(&opal_async_responses[comp_msg->params[0]], comp_msg,
+			sizeof(*comp_msg));
+	spin_lock_irqsave(&opal_async_comp_lock, flags);
+	__set_bit(comp_msg->params[0], opal_async_complete_map);
+	spin_unlock_irqrestore(&opal_async_comp_lock, flags);
+
+	wake_up(&opal_async_wait);
+
+	return 0;
+}
+
+static struct notifier_block opal_async_comp_nb = {
+		.notifier_call	= opal_async_comp_event,
+		.next		= NULL,
+		.priority	= 0,
+};
+
+static int __init opal_async_comp_init(void)
+{
+	struct device_node *opal_node;
+	const __be32 *async;
+	int err;
+
+	opal_node = of_find_node_by_path("/ibm,opal");
+	if (!opal_node) {
+		pr_err("%s: Opal node not found\n", __func__);
+		err = -ENOENT;
+		goto out;
+	}
+
+	async = of_get_property(opal_node, "opal-msg-async-num", NULL);
+	if (!async) {
+		pr_err("%s: %s has no opal-msg-async-num\n",
+				__func__, opal_node->full_name);
+		err = -ENOENT;
+		goto out_opal_node;
+	}
+
+	opal_max_async_tokens = be32_to_cpup(async);
+	if (opal_max_async_tokens > N_ASYNC_COMPLETIONS)
+		opal_max_async_tokens = N_ASYNC_COMPLETIONS;
+
+	err = opal_message_notifier_register(OPAL_MSG_ASYNC_COMP,
+			&opal_async_comp_nb);
+	if (err) {
+		pr_err("%s: Can't register OPAL event notifier (%d)\n",
+				__func__, err);
+		goto out_opal_node;
+	}
+
+	opal_async_responses = kzalloc(
+			sizeof(*opal_async_responses) * opal_max_async_tokens,
+			GFP_KERNEL);
+	if (!opal_async_responses) {
+		pr_err("%s: Out of memory, failed to do asynchronous "
+				"completion init\n", __func__);
+		err = -ENOMEM;
+		goto out_opal_node;
+	}
+
+	/* Initialize to 1 less than the maximum tokens available, as we may
+	 * require to pop one during emergency through synchronous call to
+	 * __opal_async_get_token()
+	 */
+	sema_init(&opal_async_sem, opal_max_async_tokens - 1);
+
+out_opal_node:
+	of_node_put(opal_node);
+out:
+	return err;
+}
+subsys_initcall(opal_async_comp_init);
diff --git a/arch/powerpc/platforms/powernv/opal-dump.c b/arch/powerpc/platforms/powernv/opal-dump.c
new file mode 100644
index 000000000000..0c767c561dc9
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-dump.c
@@ -0,0 +1,525 @@
+/*
+ * PowerNV OPAL Dump Interface
+ *
+ * Copyright 2013,2014 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kobject.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+#include <linux/delay.h>
+
+#include <asm/opal.h>
+
+#define DUMP_TYPE_FSP	0x01
+
+struct dump_obj {
+	struct kobject  kobj;
+	struct bin_attribute dump_attr;
+	uint32_t	id;  /* becomes object name */
+	uint32_t	type;
+	uint32_t	size;
+	char		*buffer;
+};
+#define to_dump_obj(x) container_of(x, struct dump_obj, kobj)
+
+struct dump_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct dump_obj *dump, struct dump_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct dump_obj *dump, struct dump_attribute *attr,
+			 const char *buf, size_t count);
+};
+#define to_dump_attr(x) container_of(x, struct dump_attribute, attr)
+
+static ssize_t dump_id_show(struct dump_obj *dump_obj,
+			    struct dump_attribute *attr,
+			    char *buf)
+{
+	return sprintf(buf, "0x%x\n", dump_obj->id);
+}
+
+static const char* dump_type_to_string(uint32_t type)
+{
+	switch (type) {
+	case 0x01: return "SP Dump";
+	case 0x02: return "System/Platform Dump";
+	case 0x03: return "SMA Dump";
+	default: return "unknown";
+	}
+}
+
+static ssize_t dump_type_show(struct dump_obj *dump_obj,
+			      struct dump_attribute *attr,
+			      char *buf)
+{
+	
+	return sprintf(buf, "0x%x %s\n", dump_obj->type,
+		       dump_type_to_string(dump_obj->type));
+}
+
+static ssize_t dump_ack_show(struct dump_obj *dump_obj,
+			     struct dump_attribute *attr,
+			     char *buf)
+{
+	return sprintf(buf, "ack - acknowledge dump\n");
+}
+
+/*
+ * Send acknowledgement to OPAL
+ */
+static int64_t dump_send_ack(uint32_t dump_id)
+{
+	int rc;
+
+	rc = opal_dump_ack(dump_id);
+	if (rc)
+		pr_warn("%s: Failed to send ack to Dump ID 0x%x (%d)\n",
+			__func__, dump_id, rc);
+	return rc;
+}
+
+static void delay_release_kobj(void *kobj)
+{
+	kobject_put((struct kobject *)kobj);
+}
+
+static ssize_t dump_ack_store(struct dump_obj *dump_obj,
+			      struct dump_attribute *attr,
+			      const char *buf,
+			      size_t count)
+{
+	dump_send_ack(dump_obj->id);
+	sysfs_schedule_callback(&dump_obj->kobj, delay_release_kobj,
+				&dump_obj->kobj, THIS_MODULE);
+	return count;
+}
+
+/* Attributes of a dump
+ * The binary attribute of the dump itself is dynamic
+ * due to the dynamic size of the dump
+ */
+static struct dump_attribute id_attribute =
+	__ATTR(id, 0666, dump_id_show, NULL);
+static struct dump_attribute type_attribute =
+	__ATTR(type, 0666, dump_type_show, NULL);
+static struct dump_attribute ack_attribute =
+	__ATTR(acknowledge, 0660, dump_ack_show, dump_ack_store);
+
+static ssize_t init_dump_show(struct dump_obj *dump_obj,
+			      struct dump_attribute *attr,
+			      char *buf)
+{
+	return sprintf(buf, "1 - initiate dump\n");
+}
+
+static int64_t dump_fips_init(uint8_t type)
+{
+	int rc;
+
+	rc = opal_dump_init(type);
+	if (rc)
+		pr_warn("%s: Failed to initiate FipS dump (%d)\n",
+			__func__, rc);
+	return rc;
+}
+
+static ssize_t init_dump_store(struct dump_obj *dump_obj,
+			       struct dump_attribute *attr,
+			       const char *buf,
+			       size_t count)
+{
+	dump_fips_init(DUMP_TYPE_FSP);
+	pr_info("%s: Initiated FSP dump\n", __func__);
+	return count;
+}
+
+static struct dump_attribute initiate_attribute =
+	__ATTR(initiate_dump, 0600, init_dump_show, init_dump_store);
+
+static struct attribute *initiate_attrs[] = {
+	&initiate_attribute.attr,
+	NULL,
+};
+
+static struct attribute_group initiate_attr_group = {
+	.attrs = initiate_attrs,
+};
+
+static struct kset *dump_kset;
+
+static ssize_t dump_attr_show(struct kobject *kobj,
+			      struct attribute *attr,
+			      char *buf)
+{
+	struct dump_attribute *attribute;
+	struct dump_obj *dump;
+
+	attribute = to_dump_attr(attr);
+	dump = to_dump_obj(kobj);
+
+	if (!attribute->show)
+		return -EIO;
+
+	return attribute->show(dump, attribute, buf);
+}
+
+static ssize_t dump_attr_store(struct kobject *kobj,
+			       struct attribute *attr,
+			       const char *buf, size_t len)
+{
+	struct dump_attribute *attribute;
+	struct dump_obj *dump;
+
+	attribute = to_dump_attr(attr);
+	dump = to_dump_obj(kobj);
+
+	if (!attribute->store)
+		return -EIO;
+
+	return attribute->store(dump, attribute, buf, len);
+}
+
+static const struct sysfs_ops dump_sysfs_ops = {
+	.show = dump_attr_show,
+	.store = dump_attr_store,
+};
+
+static void dump_release(struct kobject *kobj)
+{
+	struct dump_obj *dump;
+
+	dump = to_dump_obj(kobj);
+	vfree(dump->buffer);
+	kfree(dump);
+}
+
+static struct attribute *dump_default_attrs[] = {
+	&id_attribute.attr,
+	&type_attribute.attr,
+	&ack_attribute.attr,
+	NULL,
+};
+
+static struct kobj_type dump_ktype = {
+	.sysfs_ops = &dump_sysfs_ops,
+	.release = &dump_release,
+	.default_attrs = dump_default_attrs,
+};
+
+static void free_dump_sg_list(struct opal_sg_list *list)
+{
+	struct opal_sg_list *sg1;
+	while (list) {
+		sg1 = list->next;
+		kfree(list);
+		list = sg1;
+	}
+	list = NULL;
+}
+
+static struct opal_sg_list *dump_data_to_sglist(struct dump_obj *dump)
+{
+	struct opal_sg_list *sg1, *list = NULL;
+	void *addr;
+	int64_t size;
+
+	addr = dump->buffer;
+	size = dump->size;
+
+	sg1 = kzalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!sg1)
+		goto nomem;
+
+	list = sg1;
+	sg1->num_entries = 0;
+	while (size > 0) {
+		/* Translate virtual address to physical address */
+		sg1->entry[sg1->num_entries].data =
+			(void *)(vmalloc_to_pfn(addr) << PAGE_SHIFT);
+
+		if (size > PAGE_SIZE)
+			sg1->entry[sg1->num_entries].length = PAGE_SIZE;
+		else
+			sg1->entry[sg1->num_entries].length = size;
+
+		sg1->num_entries++;
+		if (sg1->num_entries >= SG_ENTRIES_PER_NODE) {
+			sg1->next = kzalloc(PAGE_SIZE, GFP_KERNEL);
+			if (!sg1->next)
+				goto nomem;
+
+			sg1 = sg1->next;
+			sg1->num_entries = 0;
+		}
+		addr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+	return list;
+
+nomem:
+	pr_err("%s : Failed to allocate memory\n", __func__);
+	free_dump_sg_list(list);
+	return NULL;
+}
+
+static void sglist_to_phy_addr(struct opal_sg_list *list)
+{
+	struct opal_sg_list *sg, *next;
+
+	for (sg = list; sg; sg = next) {
+		next = sg->next;
+		/* Don't translate NULL pointer for last entry */
+		if (sg->next)
+			sg->next = (struct opal_sg_list *)__pa(sg->next);
+		else
+			sg->next = NULL;
+
+		/* Convert num_entries to length */
+		sg->num_entries =
+			sg->num_entries * sizeof(struct opal_sg_entry) + 16;
+	}
+}
+
+static int64_t dump_read_info(uint32_t *id, uint32_t *size, uint32_t *type)
+{
+	int rc;
+	*type = 0xffffffff;
+
+	rc = opal_dump_info2(id, size, type);
+
+	if (rc == OPAL_PARAMETER)
+		rc = opal_dump_info(id, size);
+
+	if (rc)
+		pr_warn("%s: Failed to get dump info (%d)\n",
+			__func__, rc);
+	return rc;
+}
+
+static int64_t dump_read_data(struct dump_obj *dump)
+{
+	struct opal_sg_list *list;
+	uint64_t addr;
+	int64_t rc;
+
+	/* Allocate memory */
+	dump->buffer = vzalloc(PAGE_ALIGN(dump->size));
+	if (!dump->buffer) {
+		pr_err("%s : Failed to allocate memory\n", __func__);
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	/* Generate SG list */
+	list = dump_data_to_sglist(dump);
+	if (!list) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	/* Translate sg list addr to real address */
+	sglist_to_phy_addr(list);
+
+	/* First entry address */
+	addr = __pa(list);
+
+	/* Fetch data */
+	rc = OPAL_BUSY_EVENT;
+	while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
+		rc = opal_dump_read(dump->id, addr);
+		if (rc == OPAL_BUSY_EVENT) {
+			opal_poll_events(NULL);
+			msleep(20);
+		}
+	}
+
+	if (rc != OPAL_SUCCESS && rc != OPAL_PARTIAL)
+		pr_warn("%s: Extract dump failed for ID 0x%x\n",
+			__func__, dump->id);
+
+	/* Free SG list */
+	free_dump_sg_list(list);
+
+out:
+	return rc;
+}
+
+static ssize_t dump_attr_read(struct file *filep, struct kobject *kobj,
+			      struct bin_attribute *bin_attr,
+			      char *buffer, loff_t pos, size_t count)
+{
+	ssize_t rc;
+
+	struct dump_obj *dump = to_dump_obj(kobj);
+
+	if (!dump->buffer) {
+		rc = dump_read_data(dump);
+
+		if (rc != OPAL_SUCCESS && rc != OPAL_PARTIAL) {
+			vfree(dump->buffer);
+			dump->buffer = NULL;
+
+			return -EIO;
+		}
+		if (rc == OPAL_PARTIAL) {
+			/* On a partial read, we just return EIO
+			 * and rely on userspace to ask us to try
+			 * again.
+			 */
+			pr_info("%s: Platform dump partially read.ID = 0x%x\n",
+				__func__, dump->id);
+			return -EIO;
+		}
+	}
+
+	memcpy(buffer, dump->buffer + pos, count);
+
+	/* You may think we could free the dump buffer now and retrieve
+	 * it again later if needed, but due to current firmware limitation,
+	 * that's not the case. So, once read into userspace once,
+	 * we keep the dump around until it's acknowledged by userspace.
+	 */
+
+	return count;
+}
+
+static struct dump_obj *create_dump_obj(uint32_t id, size_t size,
+					uint32_t type)
+{
+	struct dump_obj *dump;
+	int rc;
+
+	dump = kzalloc(sizeof(*dump), GFP_KERNEL);
+	if (!dump)
+		return NULL;
+
+	dump->kobj.kset = dump_kset;
+
+	kobject_init(&dump->kobj, &dump_ktype);
+
+	sysfs_bin_attr_init(&dump->dump_attr);
+
+	dump->dump_attr.attr.name = "dump";
+	dump->dump_attr.attr.mode = 0400;
+	dump->dump_attr.size = size;
+	dump->dump_attr.read = dump_attr_read;
+
+	dump->id = id;
+	dump->size = size;
+	dump->type = type;
+
+	rc = kobject_add(&dump->kobj, NULL, "0x%x-0x%x", type, id);
+	if (rc) {
+		kobject_put(&dump->kobj);
+		return NULL;
+	}
+
+	rc = sysfs_create_bin_file(&dump->kobj, &dump->dump_attr);
+	if (rc) {
+		kobject_put(&dump->kobj);
+		return NULL;
+	}
+
+	pr_info("%s: New platform dump. ID = 0x%x Size %u\n",
+		__func__, dump->id, dump->size);
+
+	kobject_uevent(&dump->kobj, KOBJ_ADD);
+
+	return dump;
+}
+
+static int process_dump(void)
+{
+	int rc;
+	uint32_t dump_id, dump_size, dump_type;
+	struct dump_obj *dump;
+	char name[22];
+
+	rc = dump_read_info(&dump_id, &dump_size, &dump_type);
+	if (rc != OPAL_SUCCESS)
+		return rc;
+
+	sprintf(name, "0x%x-0x%x", dump_type, dump_id);
+
+	/* we may get notified twice, let's handle
+	 * that gracefully and not create two conflicting
+	 * entries.
+	 */
+	if (kset_find_obj(dump_kset, name))
+		return 0;
+
+	dump = create_dump_obj(dump_id, dump_size, dump_type);
+	if (!dump)
+		return -1;
+
+	return 0;
+}
+
+static void dump_work_fn(struct work_struct *work)
+{
+	process_dump();
+}
+
+static DECLARE_WORK(dump_work, dump_work_fn);
+
+static void schedule_process_dump(void)
+{
+	schedule_work(&dump_work);
+}
+
+/*
+ * New dump available notification
+ *
+ * Once we get notification, we add sysfs entries for it.
+ * We only fetch the dump on demand, and create sysfs asynchronously.
+ */
+static int dump_event(struct notifier_block *nb,
+		      unsigned long events, void *change)
+{
+	if (events & OPAL_EVENT_DUMP_AVAIL)
+		schedule_process_dump();
+
+	return 0;
+}
+
+static struct notifier_block dump_nb = {
+	.notifier_call  = dump_event,
+	.next           = NULL,
+	.priority       = 0
+};
+
+void __init opal_platform_dump_init(void)
+{
+	int rc;
+
+	dump_kset = kset_create_and_add("dump", NULL, opal_kobj);
+	if (!dump_kset) {
+		pr_warn("%s: Failed to create dump kset\n", __func__);
+		return;
+	}
+
+	rc = sysfs_create_group(&dump_kset->kobj, &initiate_attr_group);
+	if (rc) {
+		pr_warn("%s: Failed to create initiate dump attr group\n",
+			__func__);
+		kobject_put(&dump_kset->kobj);
+		return;
+	}
+
+	rc = opal_notifier_register(&dump_nb);
+	if (rc) {
+		pr_warn("%s: Can't register OPAL event notifier (%d)\n",
+			__func__, rc);
+		return;
+	}
+
+	opal_dump_resend_notification();
+}
diff --git a/arch/powerpc/platforms/powernv/opal-elog.c b/arch/powerpc/platforms/powernv/opal-elog.c
new file mode 100644
index 000000000000..1d7355bc9db0
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-elog.c
@@ -0,0 +1,313 @@
+/*
+ * Error log support on PowerNV.
+ *
+ * Copyright 2013,2014 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/fs.h>
+#include <linux/vmalloc.h>
+#include <linux/fcntl.h>
+#include <linux/kobject.h>
+#include <asm/uaccess.h>
+#include <asm/opal.h>
+
+struct elog_obj {
+	struct kobject kobj;
+	struct bin_attribute raw_attr;
+	uint64_t id;
+	uint64_t type;
+	size_t size;
+	char *buffer;
+};
+#define to_elog_obj(x) container_of(x, struct elog_obj, kobj)
+
+struct elog_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct elog_obj *elog, struct elog_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct elog_obj *elog, struct elog_attribute *attr,
+			 const char *buf, size_t count);
+};
+#define to_elog_attr(x) container_of(x, struct elog_attribute, attr)
+
+static ssize_t elog_id_show(struct elog_obj *elog_obj,
+			    struct elog_attribute *attr,
+			    char *buf)
+{
+	return sprintf(buf, "0x%llx\n", elog_obj->id);
+}
+
+static const char *elog_type_to_string(uint64_t type)
+{
+	switch (type) {
+	case 0: return "PEL";
+	default: return "unknown";
+	}
+}
+
+static ssize_t elog_type_show(struct elog_obj *elog_obj,
+			      struct elog_attribute *attr,
+			      char *buf)
+{
+	return sprintf(buf, "0x%llx %s\n",
+		       elog_obj->type,
+		       elog_type_to_string(elog_obj->type));
+}
+
+static ssize_t elog_ack_show(struct elog_obj *elog_obj,
+			     struct elog_attribute *attr,
+			     char *buf)
+{
+	return sprintf(buf, "ack - acknowledge log message\n");
+}
+
+static void delay_release_kobj(void *kobj)
+{
+	kobject_put((struct kobject *)kobj);
+}
+
+static ssize_t elog_ack_store(struct elog_obj *elog_obj,
+			      struct elog_attribute *attr,
+			      const char *buf,
+			      size_t count)
+{
+	opal_send_ack_elog(elog_obj->id);
+	sysfs_schedule_callback(&elog_obj->kobj, delay_release_kobj,
+				&elog_obj->kobj, THIS_MODULE);
+	return count;
+}
+
+static struct elog_attribute id_attribute =
+	__ATTR(id, 0666, elog_id_show, NULL);
+static struct elog_attribute type_attribute =
+	__ATTR(type, 0666, elog_type_show, NULL);
+static struct elog_attribute ack_attribute =
+	__ATTR(acknowledge, 0660, elog_ack_show, elog_ack_store);
+
+static struct kset *elog_kset;
+
+static ssize_t elog_attr_show(struct kobject *kobj,
+			      struct attribute *attr,
+			      char *buf)
+{
+	struct elog_attribute *attribute;
+	struct elog_obj *elog;
+
+	attribute = to_elog_attr(attr);
+	elog = to_elog_obj(kobj);
+
+	if (!attribute->show)
+		return -EIO;
+
+	return attribute->show(elog, attribute, buf);
+}
+
+static ssize_t elog_attr_store(struct kobject *kobj,
+			       struct attribute *attr,
+			       const char *buf, size_t len)
+{
+	struct elog_attribute *attribute;
+	struct elog_obj *elog;
+
+	attribute = to_elog_attr(attr);
+	elog = to_elog_obj(kobj);
+
+	if (!attribute->store)
+		return -EIO;
+
+	return attribute->store(elog, attribute, buf, len);
+}
+
+static const struct sysfs_ops elog_sysfs_ops = {
+	.show = elog_attr_show,
+	.store = elog_attr_store,
+};
+
+static void elog_release(struct kobject *kobj)
+{
+	struct elog_obj *elog;
+
+	elog = to_elog_obj(kobj);
+	kfree(elog->buffer);
+	kfree(elog);
+}
+
+static struct attribute *elog_default_attrs[] = {
+	&id_attribute.attr,
+	&type_attribute.attr,
+	&ack_attribute.attr,
+	NULL,
+};
+
+static struct kobj_type elog_ktype = {
+	.sysfs_ops = &elog_sysfs_ops,
+	.release = &elog_release,
+	.default_attrs = elog_default_attrs,
+};
+
+/* Maximum size of a single log on FSP is 16KB */
+#define OPAL_MAX_ERRLOG_SIZE	16384
+
+static ssize_t raw_attr_read(struct file *filep, struct kobject *kobj,
+			     struct bin_attribute *bin_attr,
+			     char *buffer, loff_t pos, size_t count)
+{
+	int opal_rc;
+
+	struct elog_obj *elog = to_elog_obj(kobj);
+
+	/* We may have had an error reading before, so let's retry */
+	if (!elog->buffer) {
+		elog->buffer = kzalloc(elog->size, GFP_KERNEL);
+		if (!elog->buffer)
+			return -EIO;
+
+		opal_rc = opal_read_elog(__pa(elog->buffer),
+					 elog->size, elog->id);
+		if (opal_rc != OPAL_SUCCESS) {
+			pr_err("ELOG: log read failed for log-id=%llx\n",
+			       elog->id);
+			kfree(elog->buffer);
+			elog->buffer = NULL;
+			return -EIO;
+		}
+	}
+
+	memcpy(buffer, elog->buffer + pos, count);
+
+	return count;
+}
+
+static struct elog_obj *create_elog_obj(uint64_t id, size_t size, uint64_t type)
+{
+	struct elog_obj *elog;
+	int rc;
+
+	elog = kzalloc(sizeof(*elog), GFP_KERNEL);
+	if (!elog)
+		return NULL;
+
+	elog->kobj.kset = elog_kset;
+
+	kobject_init(&elog->kobj, &elog_ktype);
+
+	sysfs_bin_attr_init(&elog->raw_attr);
+
+	elog->raw_attr.attr.name = "raw";
+	elog->raw_attr.attr.mode = 0400;
+	elog->raw_attr.size = size;
+	elog->raw_attr.read = raw_attr_read;
+
+	elog->id = id;
+	elog->size = size;
+	elog->type = type;
+
+	elog->buffer = kzalloc(elog->size, GFP_KERNEL);
+
+	if (elog->buffer) {
+		rc = opal_read_elog(__pa(elog->buffer),
+					 elog->size, elog->id);
+		if (rc != OPAL_SUCCESS) {
+			pr_err("ELOG: log read failed for log-id=%llx\n",
+			       elog->id);
+			kfree(elog->buffer);
+			elog->buffer = NULL;
+		}
+	}
+
+	rc = kobject_add(&elog->kobj, NULL, "0x%llx", id);
+	if (rc) {
+		kobject_put(&elog->kobj);
+		return NULL;
+	}
+
+	rc = sysfs_create_bin_file(&elog->kobj, &elog->raw_attr);
+	if (rc) {
+		kobject_put(&elog->kobj);
+		return NULL;
+	}
+
+	kobject_uevent(&elog->kobj, KOBJ_ADD);
+
+	return elog;
+}
+
+static void elog_work_fn(struct work_struct *work)
+{
+	size_t elog_size;
+	uint64_t log_id;
+	uint64_t elog_type;
+	int rc;
+	char name[2+16+1];
+
+	rc = opal_get_elog_size(&log_id, &elog_size, &elog_type);
+	if (rc != OPAL_SUCCESS) {
+		pr_err("ELOG: Opal log read failed\n");
+		return;
+	}
+
+	BUG_ON(elog_size > OPAL_MAX_ERRLOG_SIZE);
+
+	if (elog_size >= OPAL_MAX_ERRLOG_SIZE)
+		elog_size  =  OPAL_MAX_ERRLOG_SIZE;
+
+	sprintf(name, "0x%llx", log_id);
+
+	/* we may get notified twice, let's handle
+	 * that gracefully and not create two conflicting
+	 * entries.
+	 */
+	if (kset_find_obj(elog_kset, name))
+		return;
+
+	create_elog_obj(log_id, elog_size, elog_type);
+}
+
+static DECLARE_WORK(elog_work, elog_work_fn);
+
+static int elog_event(struct notifier_block *nb,
+				unsigned long events, void *change)
+{
+	/* check for error log event */
+	if (events & OPAL_EVENT_ERROR_LOG_AVAIL)
+		schedule_work(&elog_work);
+	return 0;
+}
+
+static struct notifier_block elog_nb = {
+	.notifier_call  = elog_event,
+	.next           = NULL,
+	.priority       = 0
+};
+
+int __init opal_elog_init(void)
+{
+	int rc = 0;
+
+	elog_kset = kset_create_and_add("elog", NULL, opal_kobj);
+	if (!elog_kset) {
+		pr_warn("%s: failed to create elog kset\n", __func__);
+		return -1;
+	}
+
+	rc = opal_notifier_register(&elog_nb);
+	if (rc) {
+		pr_err("%s: Can't register OPAL event notifier (%d)\n",
+		__func__, rc);
+		return rc;
+	}
+
+	/* We are now ready to pull error logs from opal. */
+	opal_resend_pending_logs();
+
+	return 0;
+}
diff --git a/arch/powerpc/platforms/powernv/opal-sensor.c b/arch/powerpc/platforms/powernv/opal-sensor.c
new file mode 100644
index 000000000000..663cc9c65613
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-sensor.c
@@ -0,0 +1,64 @@
+/*
+ * PowerNV sensor code
+ *
+ * Copyright (C) 2013 IBM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <asm/opal.h>
+
+static DEFINE_MUTEX(opal_sensor_mutex);
+
+/*
+ * This will return sensor information to driver based on the requested sensor
+ * handle. A handle is an opaque id for the powernv, read by the driver from the
+ * device tree..
+ */
+int opal_get_sensor_data(u32 sensor_hndl, u32 *sensor_data)
+{
+	int ret, token;
+	struct opal_msg msg;
+
+	token = opal_async_get_token_interruptible();
+	if (token < 0) {
+		pr_err("%s: Couldn't get the token, returning\n", __func__);
+		ret = token;
+		goto out;
+	}
+
+	mutex_lock(&opal_sensor_mutex);
+	ret = opal_sensor_read(sensor_hndl, token, sensor_data);
+	if (ret != OPAL_ASYNC_COMPLETION)
+		goto out_token;
+
+	ret = opal_async_wait_response(token, &msg);
+	if (ret) {
+		pr_err("%s: Failed to wait for the async response, %d\n",
+				__func__, ret);
+		goto out_token;
+	}
+
+	ret = msg.params[1];
+
+out_token:
+	mutex_unlock(&opal_sensor_mutex);
+	opal_async_release_token(token);
+out:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(opal_get_sensor_data);
diff --git a/arch/powerpc/platforms/powernv/opal-sysparam.c b/arch/powerpc/platforms/powernv/opal-sysparam.c
new file mode 100644
index 000000000000..0bd249a26f30
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-sysparam.c
@@ -0,0 +1,290 @@
+/*
+ * PowerNV system parameter code
+ *
+ * Copyright (C) 2013 IBM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kobject.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/gfp.h>
+#include <linux/stat.h>
+#include <asm/opal.h>
+
+#define MAX_PARAM_DATA_LEN	64
+
+static DEFINE_MUTEX(opal_sysparam_mutex);
+static struct kobject *sysparam_kobj;
+static void *param_data_buf;
+
+struct param_attr {
+	struct list_head list;
+	u32 param_id;
+	u32 param_size;
+	struct kobj_attribute kobj_attr;
+};
+
+static int opal_get_sys_param(u32 param_id, u32 length, void *buffer)
+{
+	struct opal_msg msg;
+	int ret, token;
+
+	token = opal_async_get_token_interruptible();
+	if (token < 0) {
+		if (token != -ERESTARTSYS)
+			pr_err("%s: Couldn't get the token, returning\n",
+					__func__);
+		ret = token;
+		goto out;
+	}
+
+	ret = opal_get_param(token, param_id, (u64)buffer, length);
+	if (ret != OPAL_ASYNC_COMPLETION)
+		goto out_token;
+
+	ret = opal_async_wait_response(token, &msg);
+	if (ret) {
+		pr_err("%s: Failed to wait for the async response, %d\n",
+				__func__, ret);
+		goto out_token;
+	}
+
+	ret = msg.params[1];
+
+out_token:
+	opal_async_release_token(token);
+out:
+	return ret;
+}
+
+static int opal_set_sys_param(u32 param_id, u32 length, void *buffer)
+{
+	struct opal_msg msg;
+	int ret, token;
+
+	token = opal_async_get_token_interruptible();
+	if (token < 0) {
+		if (token != -ERESTARTSYS)
+			pr_err("%s: Couldn't get the token, returning\n",
+					__func__);
+		ret = token;
+		goto out;
+	}
+
+	ret = opal_set_param(token, param_id, (u64)buffer, length);
+
+	if (ret != OPAL_ASYNC_COMPLETION)
+		goto out_token;
+
+	ret = opal_async_wait_response(token, &msg);
+	if (ret) {
+		pr_err("%s: Failed to wait for the async response, %d\n",
+				__func__, ret);
+		goto out_token;
+	}
+
+	ret = msg.params[1];
+
+out_token:
+	opal_async_release_token(token);
+out:
+	return ret;
+}
+
+static ssize_t sys_param_show(struct kobject *kobj,
+		struct kobj_attribute *kobj_attr, char *buf)
+{
+	struct param_attr *attr = container_of(kobj_attr, struct param_attr,
+			kobj_attr);
+	int ret;
+
+	mutex_lock(&opal_sysparam_mutex);
+	ret = opal_get_sys_param(attr->param_id, attr->param_size,
+			param_data_buf);
+	if (ret)
+		goto out;
+
+	memcpy(buf, param_data_buf, attr->param_size);
+
+out:
+	mutex_unlock(&opal_sysparam_mutex);
+	return ret ? ret : attr->param_size;
+}
+
+static ssize_t sys_param_store(struct kobject *kobj,
+		struct kobj_attribute *kobj_attr, const char *buf, size_t count)
+{
+	struct param_attr *attr = container_of(kobj_attr, struct param_attr,
+			kobj_attr);
+	int ret;
+
+	mutex_lock(&opal_sysparam_mutex);
+	memcpy(param_data_buf, buf, count);
+	ret = opal_set_sys_param(attr->param_id, attr->param_size,
+			param_data_buf);
+	mutex_unlock(&opal_sysparam_mutex);
+	return ret ? ret : count;
+}
+
+void __init opal_sys_param_init(void)
+{
+	struct device_node *sysparam;
+	struct param_attr *attr;
+	u32 *id, *size;
+	int count, i;
+	u8 *perm;
+
+	if (!opal_kobj) {
+		pr_warn("SYSPARAM: opal kobject is not available\n");
+		goto out;
+	}
+
+	sysparam_kobj = kobject_create_and_add("sysparams", opal_kobj);
+	if (!sysparam_kobj) {
+		pr_err("SYSPARAM: Failed to create sysparam kobject\n");
+		goto out;
+	}
+
+	/* Allocate big enough buffer for any get/set transactions */
+	param_data_buf = kzalloc(MAX_PARAM_DATA_LEN, GFP_KERNEL);
+	if (!param_data_buf) {
+		pr_err("SYSPARAM: Failed to allocate memory for param data "
+				"buf\n");
+		goto out_kobj_put;
+	}
+
+	sysparam = of_find_node_by_path("/ibm,opal/sysparams");
+	if (!sysparam) {
+		pr_err("SYSPARAM: Opal sysparam node not found\n");
+		goto out_param_buf;
+	}
+
+	if (!of_device_is_compatible(sysparam, "ibm,opal-sysparams")) {
+		pr_err("SYSPARAM: Opal sysparam node not compatible\n");
+		goto out_node_put;
+	}
+
+	/* Number of parameters exposed through DT */
+	count = of_property_count_strings(sysparam, "param-name");
+	if (count < 0) {
+		pr_err("SYSPARAM: No string found of property param-name in "
+				"the node %s\n", sysparam->name);
+		goto out_node_put;
+	}
+
+	id = kzalloc(sizeof(*id) * count, GFP_KERNEL);
+	if (!id) {
+		pr_err("SYSPARAM: Failed to allocate memory to read parameter "
+				"id\n");
+		goto out_node_put;
+	}
+
+	size = kzalloc(sizeof(*size) * count, GFP_KERNEL);
+	if (!size) {
+		pr_err("SYSPARAM: Failed to allocate memory to read parameter "
+				"size\n");
+		goto out_free_id;
+	}
+
+	perm = kzalloc(sizeof(*perm) * count, GFP_KERNEL);
+	if (!perm) {
+		pr_err("SYSPARAM: Failed to allocate memory to read supported "
+				"action on the parameter");
+		goto out_free_size;
+	}
+
+	if (of_property_read_u32_array(sysparam, "param-id", id, count)) {
+		pr_err("SYSPARAM: Missing property param-id in the DT\n");
+		goto out_free_perm;
+	}
+
+	if (of_property_read_u32_array(sysparam, "param-len", size, count)) {
+		pr_err("SYSPARAM: Missing propery param-len in the DT\n");
+		goto out_free_perm;
+	}
+
+
+	if (of_property_read_u8_array(sysparam, "param-perm", perm, count)) {
+		pr_err("SYSPARAM: Missing propery param-perm in the DT\n");
+		goto out_free_perm;
+	}
+
+	attr = kzalloc(sizeof(*attr) * count, GFP_KERNEL);
+	if (!attr) {
+		pr_err("SYSPARAM: Failed to allocate memory for parameter "
+				"attributes\n");
+		goto out_free_perm;
+	}
+
+	/* For each of the parameters, populate the parameter attributes */
+	for (i = 0; i < count; i++) {
+		sysfs_attr_init(&attr[i].kobj_attr.attr);
+		attr[i].param_id = id[i];
+		attr[i].param_size = size[i];
+		if (of_property_read_string_index(sysparam, "param-name", i,
+				&attr[i].kobj_attr.attr.name))
+			continue;
+
+		/* If the parameter is read-only or read-write */
+		switch (perm[i] & 3) {
+		case OPAL_SYSPARAM_READ:
+			attr[i].kobj_attr.attr.mode = S_IRUGO;
+			break;
+		case OPAL_SYSPARAM_WRITE:
+			attr[i].kobj_attr.attr.mode = S_IWUGO;
+			break;
+		case OPAL_SYSPARAM_RW:
+			attr[i].kobj_attr.attr.mode = S_IRUGO | S_IWUGO;
+			break;
+		default:
+			break;
+		}
+
+		attr[i].kobj_attr.show = sys_param_show;
+		attr[i].kobj_attr.store = sys_param_store;
+
+		if (sysfs_create_file(sysparam_kobj, &attr[i].kobj_attr.attr)) {
+			pr_err("SYSPARAM: Failed to create sysfs file %s\n",
+					attr[i].kobj_attr.attr.name);
+			goto out_free_attr;
+		}
+	}
+
+	kfree(perm);
+	kfree(size);
+	kfree(id);
+	of_node_put(sysparam);
+	return;
+
+out_free_attr:
+	kfree(attr);
+out_free_perm:
+	kfree(perm);
+out_free_size:
+	kfree(size);
+out_free_id:
+	kfree(id);
+out_node_put:
+	of_node_put(sysparam);
+out_param_buf:
+	kfree(param_data_buf);
+out_kobj_put:
+	kobject_put(sysparam_kobj);
+out:
+	return;
+}
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index 3e8829c40fbb..75c89df8d71e 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -123,9 +123,23 @@ OPAL_CALL(opal_xscom_write,			OPAL_XSCOM_WRITE);
 OPAL_CALL(opal_lpc_read,			OPAL_LPC_READ);
 OPAL_CALL(opal_lpc_write,			OPAL_LPC_WRITE);
 OPAL_CALL(opal_return_cpu,			OPAL_RETURN_CPU);
+OPAL_CALL(opal_read_elog,			OPAL_ELOG_READ);
+OPAL_CALL(opal_send_ack_elog,			OPAL_ELOG_ACK);
+OPAL_CALL(opal_get_elog_size,			OPAL_ELOG_SIZE);
+OPAL_CALL(opal_resend_pending_logs,		OPAL_ELOG_RESEND);
+OPAL_CALL(opal_write_elog,			OPAL_ELOG_WRITE);
 OPAL_CALL(opal_validate_flash,			OPAL_FLASH_VALIDATE);
 OPAL_CALL(opal_manage_flash,			OPAL_FLASH_MANAGE);
 OPAL_CALL(opal_update_flash,			OPAL_FLASH_UPDATE);
+OPAL_CALL(opal_dump_init,			OPAL_DUMP_INIT);
+OPAL_CALL(opal_dump_info,			OPAL_DUMP_INFO);
+OPAL_CALL(opal_dump_info2,			OPAL_DUMP_INFO2);
+OPAL_CALL(opal_dump_read,			OPAL_DUMP_READ);
+OPAL_CALL(opal_dump_ack,			OPAL_DUMP_ACK);
 OPAL_CALL(opal_get_msg,				OPAL_GET_MSG);
 OPAL_CALL(opal_check_completion,		OPAL_CHECK_ASYNC_COMPLETION);
+OPAL_CALL(opal_dump_resend_notification,	OPAL_DUMP_RESEND);
 OPAL_CALL(opal_sync_host_reboot,		OPAL_SYNC_HOST_REBOOT);
+OPAL_CALL(opal_sensor_read,			OPAL_SENSOR_READ);
+OPAL_CALL(opal_get_param,			OPAL_GET_PARAM);
+OPAL_CALL(opal_set_param,			OPAL_SET_PARAM);
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index 65499adaecff..e92f2f67640f 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -21,6 +21,7 @@
 #include <linux/sched.h>
 #include <linux/kobject.h>
 #include <linux/delay.h>
+#include <linux/memblock.h>
 #include <asm/opal.h>
 #include <asm/firmware.h>
 #include <asm/mce.h>
@@ -33,8 +34,18 @@ struct kobject *opal_kobj;
 struct opal {
 	u64 base;
 	u64 entry;
+	u64 size;
 } opal;
 
+struct mcheck_recoverable_range {
+	u64 start_addr;
+	u64 end_addr;
+	u64 recover_addr;
+};
+
+static struct mcheck_recoverable_range *mc_recoverable_range;
+static int mc_recoverable_range_len;
+
 static struct device_node *opal_node;
 static DEFINE_SPINLOCK(opal_write_lock);
 extern u64 opal_mc_secondary_handler[];
@@ -49,25 +60,29 @@ static atomic_t opal_notifier_hold = ATOMIC_INIT(0);
 int __init early_init_dt_scan_opal(unsigned long node,
 				   const char *uname, int depth, void *data)
 {
-	const void *basep, *entryp;
-	unsigned long basesz, entrysz;
+	const void *basep, *entryp, *sizep;
+	unsigned long basesz, entrysz, runtimesz;
 
 	if (depth != 1 || strcmp(uname, "ibm,opal") != 0)
 		return 0;
 
 	basep  = of_get_flat_dt_prop(node, "opal-base-address", &basesz);
 	entryp = of_get_flat_dt_prop(node, "opal-entry-address", &entrysz);
+	sizep = of_get_flat_dt_prop(node, "opal-runtime-size", &runtimesz);
 
-	if (!basep || !entryp)
+	if (!basep || !entryp || !sizep)
 		return 1;
 
 	opal.base = of_read_number(basep, basesz/4);
 	opal.entry = of_read_number(entryp, entrysz/4);
+	opal.size = of_read_number(sizep, runtimesz/4);
 
 	pr_debug("OPAL Base  = 0x%llx (basep=%p basesz=%ld)\n",
 		 opal.base, basep, basesz);
 	pr_debug("OPAL Entry = 0x%llx (entryp=%p basesz=%ld)\n",
 		 opal.entry, entryp, entrysz);
+	pr_debug("OPAL Entry = 0x%llx (sizep=%p runtimesz=%ld)\n",
+		 opal.size, sizep, runtimesz);
 
 	powerpc_firmware_features |= FW_FEATURE_OPAL;
 	if (of_flat_dt_is_compatible(node, "ibm,opal-v3")) {
@@ -84,6 +99,53 @@ int __init early_init_dt_scan_opal(unsigned long node,
 	return 1;
 }
 
+int __init early_init_dt_scan_recoverable_ranges(unsigned long node,
+				   const char *uname, int depth, void *data)
+{
+	unsigned long i, size;
+	const __be32 *prop;
+
+	if (depth != 1 || strcmp(uname, "ibm,opal") != 0)
+		return 0;
+
+	prop = of_get_flat_dt_prop(node, "mcheck-recoverable-ranges", &size);
+
+	if (!prop)
+		return 1;
+
+	pr_debug("Found machine check recoverable ranges.\n");
+
+	/*
+	 * Allocate a buffer to hold the MC recoverable ranges. We would be
+	 * accessing them in real mode, hence it needs to be within
+	 * RMO region.
+	 */
+	mc_recoverable_range =__va(memblock_alloc_base(size, __alignof__(u64),
+							ppc64_rma_size));
+	memset(mc_recoverable_range, 0, size);
+
+	/*
+	 * Each recoverable address entry is an (start address,len,
+	 * recover address) pair, * 2 cells each, totalling 4 cells per entry.
+	 */
+	for (i = 0; i < size / (sizeof(*prop) * 5); i++) {
+		mc_recoverable_range[i].start_addr =
+					of_read_number(prop + (i * 5) + 0, 2);
+		mc_recoverable_range[i].end_addr =
+					mc_recoverable_range[i].start_addr +
+					of_read_number(prop + (i * 5) + 2, 1);
+		mc_recoverable_range[i].recover_addr =
+					of_read_number(prop + (i * 5) + 3, 2);
+
+		pr_debug("Machine check recoverable range: %llx..%llx: %llx\n",
+				mc_recoverable_range[i].start_addr,
+				mc_recoverable_range[i].end_addr,
+				mc_recoverable_range[i].recover_addr);
+	}
+	mc_recoverable_range_len = i;
+	return 1;
+}
+
 static int __init opal_register_exception_handlers(void)
 {
 #ifdef __BIG_ENDIAN__
@@ -401,6 +463,38 @@ int opal_machine_check(struct pt_regs *regs)
 	return 0;
 }
 
+static uint64_t find_recovery_address(uint64_t nip)
+{
+	int i;
+
+	for (i = 0; i < mc_recoverable_range_len; i++)
+		if ((nip >= mc_recoverable_range[i].start_addr) &&
+		    (nip < mc_recoverable_range[i].end_addr))
+		    return mc_recoverable_range[i].recover_addr;
+	return 0;
+}
+
+bool opal_mce_check_early_recovery(struct pt_regs *regs)
+{
+	uint64_t recover_addr = 0;
+
+	if (!opal.base || !opal.size)
+		goto out;
+
+	if ((regs->nip >= opal.base) &&
+			(regs->nip <= (opal.base + opal.size)))
+		recover_addr = find_recovery_address(regs->nip);
+
+	/*
+	 * Setup regs->nip to rfi into fixup address.
+	 */
+	if (recover_addr)
+		regs->nip = recover_addr;
+
+out:
+	return !!recover_addr;
+}
+
 static irqreturn_t opal_interrupt(int irq, void *data)
 {
 	__be64 events;
@@ -472,8 +566,14 @@ static int __init opal_init(void)
 	/* Create "opal" kobject under /sys/firmware */
 	rc = opal_sysfs_init();
 	if (rc == 0) {
+		/* Setup error log interface */
+		rc = opal_elog_init();
 		/* Setup code update interface */
 		opal_flash_init();
+		/* Setup platform dump extract interface */
+		opal_platform_dump_init();
+		/* Setup system parameters interface */
+		opal_sys_param_init();
 	}
 
 	return 0;
diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index 81a7a0a79be7..61cf8fa9c61b 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -187,6 +187,7 @@ static void __init pnv_setup_machdep_opal(void)
 	ppc_md.power_off = pnv_power_off;
 	ppc_md.halt = pnv_halt;
 	ppc_md.machine_check_exception = opal_machine_check;
+	ppc_md.mce_check_early_recovery = opal_mce_check_early_recovery;
 }
 
 #ifdef CONFIG_PPC_POWERNV_RTAS
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 80b1d57c306a..2cb8b776c84a 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -111,6 +111,18 @@ config CMM
 	  will be reused for other LPARs. The interface allows firmware to
 	  balance memory across many LPARs.
 
+config HV_PERF_CTRS
+       bool "Hypervisor supplied PMU events (24x7 & GPCI)"
+       default y
+       depends on PERF_EVENTS && PPC_PSERIES
+       help
+	  Enable access to hypervisor supplied counters in perf. Currently,
+	  this enables code that uses the hcall GetPerfCounterInfo and 24x7
+	  interfaces to retrieve counters. GPCI exists on Power 6 and later
+	  systems. 24x7 is available on Power 8 systems.
+
+          If unsure, select Y.
+
 config DTL
 	bool "Dispatch Trace Log"
 	depends on PPC_SPLPAR && DEBUG_FS
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index 0ea99e3d4815..9b8e05078a63 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -420,4 +420,4 @@ static int __init pseries_cpu_hotplug_init(void)
 
 	return 0;
 }
-arch_initcall(pseries_cpu_hotplug_init);
+machine_arch_initcall(pseries, pseries_cpu_hotplug_init);
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index 9590dbb756f2..573b488fc48b 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -14,6 +14,7 @@
 #include <linux/memblock.h>
 #include <linux/vmalloc.h>
 #include <linux/memory.h>
+#include <linux/memory_hotplug.h>
 
 #include <asm/firmware.h>
 #include <asm/machdep.h>
@@ -75,13 +76,27 @@ unsigned long memory_block_size_bytes(void)
 }
 
 #ifdef CONFIG_MEMORY_HOTREMOVE
-static int pseries_remove_memblock(unsigned long base, unsigned int memblock_size)
+static int pseries_remove_memory(u64 start, u64 size)
 {
-	unsigned long start, start_pfn;
-	struct zone *zone;
 	int ret;
-	unsigned long section;
-	unsigned long sections_to_remove;
+
+	/* Remove htab bolted mappings for this section of memory */
+	start = (unsigned long)__va(start);
+	ret = remove_section_mapping(start, start + size);
+
+	/* Ensure all vmalloc mappings are flushed in case they also
+	 * hit that section of memory
+	 */
+	vm_unmap_aliases();
+
+	return ret;
+}
+
+static int pseries_remove_memblock(unsigned long base, unsigned int memblock_size)
+{
+	unsigned long block_sz, start_pfn;
+	int sections_per_block;
+	int i, nid;
 
 	start_pfn = base >> PAGE_SHIFT;
 
@@ -90,45 +105,21 @@ static int pseries_remove_memblock(unsigned long base, unsigned int memblock_siz
 		return 0;
 	}
 
-	zone = page_zone(pfn_to_page(start_pfn));
+	block_sz = memory_block_size_bytes();
+	sections_per_block = block_sz / MIN_MEMORY_BLOCK_SIZE;
+	nid = memory_add_physaddr_to_nid(base);
 
-	/*
-	 * Remove section mappings and sysfs entries for the
-	 * section of the memory we are removing.
-	 *
-	 * NOTE: Ideally, this should be done in generic code like
-	 * remove_memory(). But remove_memory() gets called by writing
-	 * to sysfs "state" file and we can't remove sysfs entries
-	 * while writing to it. So we have to defer it to here.
-	 */
-	sections_to_remove = (memblock_size >> PAGE_SHIFT) / PAGES_PER_SECTION;
-	for (section = 0; section < sections_to_remove; section++) {
-		unsigned long pfn = start_pfn + section * PAGES_PER_SECTION;
-		ret = __remove_pages(zone, pfn, PAGES_PER_SECTION);
-		if (ret)
-			return ret;
+	for (i = 0; i < sections_per_block; i++) {
+		remove_memory(nid, base, MIN_MEMORY_BLOCK_SIZE);
+		base += MIN_MEMORY_BLOCK_SIZE;
 	}
 
-	/*
-	 * Update memory regions for memory remove
-	 */
+	/* Update memory regions for memory remove */
 	memblock_remove(base, memblock_size);
-
-	/*
-	 * Remove htab bolted mappings for this section of memory
-	 */
-	start = (unsigned long)__va(base);
-	ret = remove_section_mapping(start, start + memblock_size);
-
-	/* Ensure all vmalloc mappings are flushed in case they also
-	 * hit that section of memory
-	 */
-	vm_unmap_aliases();
-
-	return ret;
+	return 0;
 }
 
-static int pseries_remove_memory(struct device_node *np)
+static int pseries_remove_mem_node(struct device_node *np)
 {
 	const char *type;
 	const unsigned int *regs;
@@ -153,8 +144,8 @@ static int pseries_remove_memory(struct device_node *np)
 	base = *(unsigned long *)regs;
 	lmb_size = regs[3];
 
-	ret = pseries_remove_memblock(base, lmb_size);
-	return ret;
+	pseries_remove_memblock(base, lmb_size);
+	return 0;
 }
 #else
 static inline int pseries_remove_memblock(unsigned long base,
@@ -162,13 +153,13 @@ static inline int pseries_remove_memblock(unsigned long base,
 {
 	return -EOPNOTSUPP;
 }
-static inline int pseries_remove_memory(struct device_node *np)
+static inline int pseries_remove_mem_node(struct device_node *np)
 {
 	return -EOPNOTSUPP;
 }
 #endif /* CONFIG_MEMORY_HOTREMOVE */
 
-static int pseries_add_memory(struct device_node *np)
+static int pseries_add_mem_node(struct device_node *np)
 {
 	const char *type;
 	const unsigned int *regs;
@@ -254,10 +245,10 @@ static int pseries_memory_notifier(struct notifier_block *nb,
 
 	switch (action) {
 	case OF_RECONFIG_ATTACH_NODE:
-		err = pseries_add_memory(node);
+		err = pseries_add_mem_node(node);
 		break;
 	case OF_RECONFIG_DETACH_NODE:
-		err = pseries_remove_memory(node);
+		err = pseries_remove_mem_node(node);
 		break;
 	case OF_RECONFIG_UPDATE_PROPERTY:
 		pr = (struct of_prop_reconfig *)node;
@@ -277,6 +268,10 @@ static int __init pseries_memory_hotplug_init(void)
 	if (firmware_has_feature(FW_FEATURE_LPAR))
 		of_reconfig_notifier_register(&pseries_mem_nb);
 
+#ifdef CONFIG_MEMORY_HOTREMOVE
+	ppc_md.remove_memory = pseries_remove_memory;
+#endif
+
 	return 0;
 }
 machine_device_initcall(pseries, pseries_memory_hotplug_init);
diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c
index cde4e0a095ae..bde7ebad3949 100644
--- a/arch/powerpc/platforms/pseries/mobility.c
+++ b/arch/powerpc/platforms/pseries/mobility.c
@@ -290,13 +290,6 @@ void post_mobility_fixup(void)
 	int rc;
 	int activate_fw_token;
 
-	rc = pseries_devicetree_update(MIGRATION_SCOPE);
-	if (rc) {
-		printk(KERN_ERR "Initial post-mobility device tree update "
-		       "failed: %d\n", rc);
-		return;
-	}
-
 	activate_fw_token = rtas_token("ibm,activate-firmware");
 	if (activate_fw_token == RTAS_UNKNOWN_SERVICE) {
 		printk(KERN_ERR "Could not make post-mobility "
@@ -304,16 +297,17 @@ void post_mobility_fixup(void)
 		return;
 	}
 
-	rc = rtas_call(activate_fw_token, 0, 1, NULL);
-	if (!rc) {
-		rc = pseries_devicetree_update(MIGRATION_SCOPE);
-		if (rc)
-			printk(KERN_ERR "Secondary post-mobility device tree "
-			       "update failed: %d\n", rc);
-	} else {
+	do {
+		rc = rtas_call(activate_fw_token, 0, 1, NULL);
+	} while (rtas_busy_delay(rc));
+
+	if (rc)
 		printk(KERN_ERR "Post-mobility activate-fw failed: %d\n", rc);
-		return;
-	}
+
+	rc = pseries_devicetree_update(MIGRATION_SCOPE);
+	if (rc)
+		printk(KERN_ERR "Post-mobility device tree update "
+			"failed: %d\n", rc);
 
 	return;
 }
diff --git a/arch/powerpc/platforms/pseries/suspend.c b/arch/powerpc/platforms/pseries/suspend.c
index 16a255255d30..b87b97849d4c 100644
--- a/arch/powerpc/platforms/pseries/suspend.c
+++ b/arch/powerpc/platforms/pseries/suspend.c
@@ -26,6 +26,7 @@
 #include <asm/mmu.h>
 #include <asm/rtas.h>
 #include <asm/topology.h>
+#include "../../kernel/cacheinfo.h"
 
 static u64 stream_id;
 static struct device suspend_dev;
@@ -79,6 +80,23 @@ static int pseries_suspend_cpu(void)
 }
 
 /**
+ * pseries_suspend_enable_irqs
+ *
+ * Post suspend configuration updates
+ *
+ **/
+static void pseries_suspend_enable_irqs(void)
+{
+	/*
+	 * Update configuration which can be modified based on device tree
+	 * changes during resume.
+	 */
+	cacheinfo_cpu_offline(smp_processor_id());
+	post_mobility_fixup();
+	cacheinfo_cpu_online(smp_processor_id());
+}
+
+/**
  * pseries_suspend_enter - Final phase of hibernation
  *
  * Return value:
@@ -174,7 +192,30 @@ out:
 	return rc;
 }
 
-static DEVICE_ATTR(hibernate, S_IWUSR, NULL, store_hibernate);
+#define USER_DT_UPDATE	0
+#define KERN_DT_UPDATE	1
+
+/**
+ * show_hibernate - Report device tree update responsibilty
+ * @dev:		subsys root device
+ * @attr:		device attribute struct
+ * @buf:		buffer
+ *
+ * Report whether a device tree update is performed by the kernel after a
+ * resume, or if drmgr must coordinate the update from user space.
+ *
+ * Return value:
+ *	0 if drmgr is to initiate update, and 1 otherwise
+ **/
+static ssize_t show_hibernate(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	return sprintf(buf, "%d\n", KERN_DT_UPDATE);
+}
+
+static DEVICE_ATTR(hibernate, S_IWUSR | S_IRUGO,
+		   show_hibernate, store_hibernate);
 
 static struct bus_type suspend_subsys = {
 	.name = "power",
@@ -235,6 +276,7 @@ static int __init pseries_suspend_init(void)
 		return rc;
 
 	ppc_md.suspend_disable_cpu = pseries_suspend_cpu;
+	ppc_md.suspend_enable_irqs = pseries_suspend_enable_irqs;
 	suspend_set_ops(&pseries_suspend_ops);
 	return 0;
 }