Merge tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Paul Burton:
 "Main MIPS changes:

   - boot_mem_map is removed, providing a nice cleanup made possible by
     the recent removal of bootmem.

   - Some fixes to atomics, in general providing compiler barriers for
     smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs
     or MIPS32 systems using cmpxchg64().

   - Conversion to the new generic VDSO infrastructure courtesy of
     Vincenzo Frascino.

   - Removal of undefined behavior in set_io_port_base(), fixing the
     behavior of some MIPS kernel configurations when built with recent
     clang versions.

   - Initial MIPS32 huge page support, functional on at least Ingenic
     SoCs.

   - pte_special() is now supported for some configurations, allowing
     among other things generic fast GUP to be used.

   - Miscellaneous fixes & cleanups.

  And platform specific changes:

   - Major improvements to Ingenic SoC support from Paul Cercueil,
     mostly enabled by the inclusion of the new TCU (timer-counter unit)
     drivers he's spent a very patient year or so working on. Plus some
     fixes for X1000 SoCs from Zhou Yanjie.

   - Netgear R6200 v1 systems are now supported by the bcm47xx platform.

   - DT updates for BMIPS, Lantiq & Microsemi Ocelot systems"

* tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (89 commits)
  MIPS: Detect bad _PFN_SHIFT values
  MIPS: Disable pte_special() for MIPS32 with RiXi
  MIPS: ralink: deactivate PCI support for SOC_MT7621
  mips: compat: vdso: Use legacy syscalls as fallback
  MIPS: Drop Loongson _CACHE_* definitions
  MIPS: tlbex: Remove cpu_has_local_ebase
  MIPS: tlbex: Simplify r3k check
  MIPS: Select R3k-style TLB in Kconfig
  MIPS: PCI: refactor ioc3 special handling
  mips: remove ioremap_cachable
  mips/atomic: Fix smp_mb__{before,after}_atomic()
  mips/atomic: Fix loongson_llsc_mb() wreckage
  mips/atomic: Fix cmpxchg64 barriers
  MIPS: Octeon: remove duplicated include from dma-octeon.c
  firmware: bcm47xx_nvram: Allow COMPILE_TEST
  firmware: bcm47xx_nvram: Correct size_t printf format
  MIPS: Treat Loongson Extensions as ASEs
  MIPS: Remove dev_err() usage after platform_get_irq()
  MIPS: dts: mscc: describe the PTP ready interrupt
  MIPS: dts: mscc: describe the PTP register range
  ...

13 files changed, 565 insertions, 21 deletions

diff --git a/arch/mips/boot/dts/brcm/bcm3368.dtsi b/arch/mips/boot/dts/brcm/bcm3368.dtsi
index 7a3e5c8943ca..69cbef472377 100644
--- a/arch/mips/boot/dts/brcm/bcm3368.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm3368.dtsi
@@ -51,16 +51,22 @@
 		compatible = "simple-bus";
 		ranges;
 
-		periph_cntl: syscon@fff8c000 {
+		clkctl: clock-controller@fff8c004 {
+			compatible = "brcm,bcm3368-clocks";
+			reg = <0xfff8c004 0x4>;
+			#clock-cells = <1>;
+		};
+
+		periph_cntl: syscon@fff8c008 {
 			compatible = "syscon";
-			reg = <0xfff8c000 0xc>;
+			reg = <0xfff8c000 0x4>;
 			native-endian;
 		};
 
 		reboot: syscon-reboot@fff8c008 {
 			compatible = "syscon-reboot";
 			regmap = <&periph_cntl>;
-			offset = <0x8>;
+			offset = <0x0>;
 			mask = <0x1>;
 		};
 
diff --git a/arch/mips/boot/dts/brcm/bcm63268.dtsi b/arch/mips/boot/dts/brcm/bcm63268.dtsi
index 58790b173bb2..beec24145af7 100644
--- a/arch/mips/boot/dts/brcm/bcm63268.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm63268.dtsi
@@ -51,16 +51,22 @@
 		compatible = "simple-bus";
 		ranges;
 
-		periph_cntl: syscon@10000000 {
+		clkctl: clock-controller@10000004 {
+			compatible = "brcm,bcm63268-clocks";
+			reg = <0x10000004 0x4>;
+			#clock-cells = <1>;
+		};
+
+		periph_cntl: syscon@10000008 {
 			compatible = "syscon";
-			reg = <0x10000000 0x14>;
+			reg = <0x10000000 0xc>;
 			native-endian;
 		};
 
 		reboot: syscon-reboot@10000008 {
 			compatible = "syscon-reboot";
 			regmap = <&periph_cntl>;
-			offset = <0x8>;
+			offset = <0x0>;
 			mask = <0x1>;
 		};
 
diff --git a/arch/mips/boot/dts/brcm/bcm6328.dtsi b/arch/mips/boot/dts/brcm/bcm6328.dtsi
index bf6716aa425a..af860d06def6 100644
--- a/arch/mips/boot/dts/brcm/bcm6328.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6328.dtsi
@@ -51,6 +51,12 @@
 		compatible = "simple-bus";
 		ranges;
 
+		clkctl: clock-controller@10000004 {
+			compatible = "brcm,bcm6328-clocks";
+			reg = <0x10000004 0x4>;
+			#clock-cells = <1>;
+		};
+
 		periph_intc: interrupt-controller@10000020 {
 			compatible = "brcm,bcm6345-l1-intc";
 			reg = <0x10000020 0x10>,
diff --git a/arch/mips/boot/dts/brcm/bcm6358.dtsi b/arch/mips/boot/dts/brcm/bcm6358.dtsi
index 26ddae5a4247..f21176cac038 100644
--- a/arch/mips/boot/dts/brcm/bcm6358.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6358.dtsi
@@ -51,16 +51,22 @@
 		compatible = "simple-bus";
 		ranges;
 
-		periph_cntl: syscon@fffe0000 {
+		clkctl: clock-controller@fffe0004 {
+			compatible = "brcm,bcm6358-clocks";
+			reg = <0xfffe0004 0x4>;
+			#clock-cells = <1>;
+		};
+
+		periph_cntl: syscon@fffe0008 {
 			compatible = "syscon";
-			reg = <0xfffe0000 0xc>;
+			reg = <0xfffe0000 0x4>;
 			native-endian;
 		};
 
 		reboot: syscon-reboot@fffe0008 {
 			compatible = "syscon-reboot";
 			regmap = <&periph_cntl>;
-			offset = <0x8>;
+			offset = <0x0>;
 			mask = <0x1>;
 		};
 
diff --git a/arch/mips/boot/dts/brcm/bcm6362.dtsi b/arch/mips/boot/dts/brcm/bcm6362.dtsi
index c387793525dd..8ae6981735b8 100644
--- a/arch/mips/boot/dts/brcm/bcm6362.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6362.dtsi
@@ -51,16 +51,22 @@
 		compatible = "simple-bus";
 		ranges;
 
-		periph_cntl: syscon@10000000 {
+		clkctl: clock-controller@10000004 {
+			compatible = "brcm,bcm6362-clocks";
+			reg = <0x10000004 0x4>;
+			#clock-cells = <1>;
+		};
+
+		periph_cntl: syscon@10000008 {
 			compatible = "syscon";
-			reg = <0x10000000 0x14>;
+			reg = <0x10000000 0xc>;
 			native-endian;
 		};
 
 		reboot: syscon-reboot@10000008 {
 			compatible = "syscon-reboot";
 			regmap = <&periph_cntl>;
-			offset = <0x8>;
+			offset = <0x0>;
 			mask = <0x1>;
 		};
 
diff --git a/arch/mips/boot/dts/brcm/bcm6368.dtsi b/arch/mips/boot/dts/brcm/bcm6368.dtsi
index e116a385525f..449c167dd892 100644
--- a/arch/mips/boot/dts/brcm/bcm6368.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6368.dtsi
@@ -51,16 +51,22 @@
 		compatible = "simple-bus";
 		ranges;
 
-		periph_cntl: syscon@10000000 {
+		clkctl: clock-controller@10000004 {
+			compatible = "brcm,bcm6368-clocks";
+			reg = <0x10000004 0x4>;
+			#clock-cells = <1>;
+		};
+
+		periph_cntl: syscon@100000008 {
 			compatible = "syscon";
-			reg = <0x10000000 0x14>;
+			reg = <0x10000000 0xc>;
 			native-endian;
 		};
 
 		reboot: syscon-reboot@10000008 {
 			compatible = "syscon-reboot";
 			regmap = <&periph_cntl>;
-			offset = <0x8>;
+			offset = <0x0>;
 			mask = <0x1>;
 		};
 
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 4f7b1fa31cf5..2e9952311ecd 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -2,6 +2,7 @@
 /dts-v1/;
 
 #include "jz4780.dtsi"
+#include <dt-bindings/clock/ingenic,tcu.h>
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -238,3 +239,9 @@
 		bias-disable;
 	};
 };
+
+&tcu {
+	/* 3 MHz for the system timer and clocksource */
+	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>;
+	assigned-clock-rates = <3000000>, <3000000>;
+};
diff --git a/arch/mips/boot/dts/ingenic/gcw0.dts b/arch/mips/boot/dts/ingenic/gcw0.dts
index 35f0291e8d38..f58d239c2058 100644
--- a/arch/mips/boot/dts/ingenic/gcw0.dts
+++ b/arch/mips/boot/dts/ingenic/gcw0.dts
@@ -2,6 +2,7 @@
 /dts-v1/;
 
 #include "jz4770.dtsi"
+#include <dt-bindings/clock/ingenic,tcu.h>
 
 / {
 	compatible = "gcw,zero", "ingenic,jz4770";
@@ -60,3 +61,12 @@
 	/* The WiFi module is connected to the UHC. */
 	status = "okay";
 };
+
+&tcu {
+	/* 750 kHz for the system timer and clocksource */
+	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>;
+	assigned-clock-rates = <750000>, <750000>;
+
+	/* PWM1 is in use, so reserve channel #2 for the clocksource */
+	ingenic,pwm-channels-mask = <0xfa>;
+};
diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
index 2beb78a62b7d..5accda2767be 100644
--- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
@@ -53,6 +53,28 @@
 		clock-names = "rtc";
 	};
 
+	tcu: timer@10002000 {
+		compatible = "ingenic,jz4740-tcu", "simple-mfd";
+		reg = <0x10002000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10002000 0x1000>;
+
+		#clock-cells = <1>;
+
+		clocks = <&cgu JZ4740_CLK_RTC
+			  &cgu JZ4740_CLK_EXT
+			  &cgu JZ4740_CLK_PCLK
+			  &cgu JZ4740_CLK_TCU>;
+		clock-names = "rtc", "ext", "pclk", "tcu";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <23 22 21>;
+	};
+
 	rtc_dev: rtc@10003000 {
 		compatible = "ingenic,jz4740-rtc";
 		reg = <0x10003000 0x40>;
@@ -132,6 +154,53 @@
 		};
 	};
 
+	aic: audio-controller@10020000 {
+		compatible = "ingenic,jz4740-i2s";
+		reg = <0x10020000 0x38>;
+
+		#sound-dai-cells = <0>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <18>;
+
+		clocks = <&cgu JZ4740_CLK_AIC>,
+			 <&cgu JZ4740_CLK_I2S>,
+			 <&cgu JZ4740_CLK_EXT>,
+			 <&cgu JZ4740_CLK_PLL_HALF>;
+		clock-names = "aic", "i2s", "ext", "pll half";
+
+		dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>;
+		dma-names = "rx", "tx";
+	};
+
+	codec: audio-codec@100200a4 {
+		compatible = "ingenic,jz4740-codec";
+		reg = <0x10020080 0x8>;
+
+		#sound-dai-cells = <0>;
+
+		clocks = <&cgu JZ4740_CLK_AIC>;
+		clock-names = "aic";
+	};
+
+	mmc: mmc@10021000 {
+		compatible = "ingenic,jz4740-mmc";
+		reg = <0x10021000 0x1000>;
+
+		clocks = <&cgu JZ4740_CLK_MMC>;
+		clock-names = "mmc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <14>;
+
+		dmas = <&dmac 27 0xffffffff>, <&dmac 26 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+	};
+
 	uart0: serial@10030000 {
 		compatible = "ingenic,jz4740-uart";
 		reg = <0x10030000 0x100>;
@@ -154,6 +223,38 @@
 		clock-names = "baud", "module";
 	};
 
+	adc: adc@10070000 {
+		compatible = "ingenic,jz4740-adc";
+		reg = <0x10070000 0x30>;
+		#io-channel-cells = <1>;
+
+		clocks = <&cgu JZ4740_CLK_ADC>;
+		clock-names = "adc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <12>;
+	};
+
+	nemc: memory-controller@13010000 {
+		compatible = "ingenic,jz4740-nemc";
+		reg = <0x13010000 0x54>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <1 0 0x18000000 0x4000000
+			  2 0 0x14000000 0x4000000
+			  3 0 0x0c000000 0x4000000
+			  4 0 0x08000000 0x4000000>;
+
+		clocks = <&cgu JZ4740_CLK_MCLK>;
+	};
+
+	ecc: ecc-controller@13010100 {
+		compatible = "ingenic,jz4740-ecc";
+		reg = <0x13010100 0x2C>;
+
+		clocks = <&cgu JZ4740_CLK_MCLK>;
+	};
+
 	dmac: dma-controller@13020000 {
 		compatible = "ingenic,jz4740-dma";
 		reg = <0x13020000 0xbc
@@ -164,9 +265,6 @@
 		interrupts = <20>;
 
 		clocks = <&cgu JZ4740_CLK_DMA>;
-
-		/* Disable dmac until we have something that uses it */
-		status = "disabled";
 	};
 
 	uhc: uhc@13030000 {
@@ -182,4 +280,27 @@
 
 		status = "disabled";
 	};
+
+	udc: usb@13040000 {
+		compatible = "ingenic,jz4740-musb";
+		reg = <0x13040000 0x10000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <24>;
+		interrupt-names = "mc";
+
+		clocks = <&cgu JZ4740_CLK_UDC>;
+		clock-names = "udc";
+	};
+
+	lcd: lcd-controller@13050000 {
+		compatible = "ingenic,jz4740-lcd";
+		reg = <0x13050000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <30>;
+
+		clocks = <&cgu JZ4740_CLK_LCD_PCLK>, <&cgu JZ4740_CLK_LCD>;
+		clock-names = "lcd_pclk", "lcd";
+	};
 };
diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
index 49ede6c14ff3..0bfb9edff3d0 100644
--- a/arch/mips/boot/dts/ingenic/jz4770.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
@@ -46,6 +46,27 @@
 		#clock-cells = <1>;
 	};
 
+	tcu: timer@10002000 {
+		compatible = "ingenic,jz4770-tcu", "simple-mfd";
+		reg = <0x10002000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10002000 0x1000>;
+
+		#clock-cells = <1>;
+
+		clocks = <&cgu JZ4770_CLK_RTC
+			  &cgu JZ4770_CLK_EXT
+			  &cgu JZ4770_CLK_PCLK>;
+		clock-names = "rtc", "ext", "pclk";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <27 26 25>;
+	};
+
 	pinctrl: pin-controller@10010000 {
 		compatible = "ingenic,jz4770-pinctrl";
 		reg = <0x10010000 0x600>;
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index b03cdec56de9..c54bd7cfec55 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -46,6 +46,29 @@
 		#clock-cells = <1>;
 	};
 
+	tcu: timer@10002000 {
+		compatible = "ingenic,jz4780-tcu",
+			     "ingenic,jz4770-tcu",
+			     "simple-mfd";
+		reg = <0x10002000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10002000 0x1000>;
+
+		#clock-cells = <1>;
+
+		clocks = <&cgu JZ4780_CLK_RTCLK
+			  &cgu JZ4780_CLK_EXCLK
+			  &cgu JZ4780_CLK_PCLK>;
+		clock-names = "rtc", "ext", "pclk";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <27 26 25>;
+	};
+
 	rtc_dev: rtc@10003000 {
 		compatible = "ingenic,jz4780-rtc";
 		reg = <0x10003000 0x4c>;
diff --git a/arch/mips/boot/dts/ingenic/qi_lb60.dts b/arch/mips/boot/dts/ingenic/qi_lb60.dts
index 76aaf8982554..7a371d9c5a33 100644
--- a/arch/mips/boot/dts/ingenic/qi_lb60.dts
+++ b/arch/mips/boot/dts/ingenic/qi_lb60.dts
@@ -3,12 +3,231 @@
 
 #include "jz4740.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/adc/ingenic,adc.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/input/input.h>
+
+#define KEY_QI_QI	KEY_F13
+#define KEY_QI_UPRED	KEY_RIGHTALT
+#define KEY_QI_VOLUP	KEY_VOLUMEUP
+#define KEY_QI_VOLDOWN	KEY_VOLUMEDOWN
+#define KEY_QI_FN	KEY_LEFTCTRL
+
 / {
 	compatible = "qi,lb60", "ingenic,jz4740";
 
 	chosen {
 		stdout-path = &uart0;
 	};
+
+	vcc: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	mmc_power: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc_vcc";
+		gpio = <&gpd 2 0>;
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	amp_supply: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "amp_supply";
+		gpio = <&gpd 4 0>;
+		enable-active-high;
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	amp: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpb 29 GPIO_ACTIVE_HIGH>;
+		VCC-supply = <&amp_supply>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "QI LB60";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,widgets =
+			"Speaker", "Speaker",
+			"Microphone", "Mic";
+		simple-audio-card,routing =
+			"MIC", "Mic",
+			"Speaker", "OUTL",
+			"Speaker", "OUTR",
+			"INL", "LOUT",
+			"INL", "ROUT";
+
+		simple-audio-card,aux-devs = <&amp>;
+
+		simple-audio-card,bitclock-master = <&dai_codec>;
+		simple-audio-card,frame-master = <&dai_codec>;
+
+		dai_cpu: simple-audio-card,cpu {
+			sound-dai = <&aic>;
+		};
+
+		dai_codec: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key {
+			label = "Power";
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+			gpios = <&gpd 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keyboard {
+		compatible = "gpio-matrix-keypad";
+
+		col-scan-delay-us = <10>;
+		debounce-delay-ms = <10>;
+		wakeup-source;
+
+		row-gpios = <&gpd 18 0 &gpd 19 0 &gpd 20 0 &gpd 21 0
+			     &gpd 22 0 &gpd 23 0 &gpd 24 0 &gpd 26 0>;
+		col-gpios = <&gpc 10 0 &gpc 11 0 &gpc 12 0 &gpc 13 0
+			     &gpc 14 0 &gpc 15 0 &gpc 16 0 &gpc 17 0>;
+		gpio-activelow;
+
+		linux,keymap = <
+			MATRIX_KEY(0, 0, KEY_F1)	/* S2 */
+			MATRIX_KEY(0, 1, KEY_F2)	/* S3 */
+			MATRIX_KEY(0, 2, KEY_F3)	/* S4 */
+			MATRIX_KEY(0, 3, KEY_F4)	/* S5 */
+			MATRIX_KEY(0, 4, KEY_F5)	/* S6 */
+			MATRIX_KEY(0, 5, KEY_F6)	/* S7 */
+			MATRIX_KEY(0, 6, KEY_F7)	/* S8 */
+
+			MATRIX_KEY(1, 0, KEY_Q)	/* S10 */
+			MATRIX_KEY(1, 1, KEY_W)	/* S11 */
+			MATRIX_KEY(1, 2, KEY_E)	/* S12 */
+			MATRIX_KEY(1, 3, KEY_R)	/* S13 */
+			MATRIX_KEY(1, 4, KEY_T)	/* S14 */
+			MATRIX_KEY(1, 5, KEY_Y)	/* S15 */
+			MATRIX_KEY(1, 6, KEY_U)	/* S16 */
+			MATRIX_KEY(1, 7, KEY_I)	/* S17 */
+			MATRIX_KEY(2, 0, KEY_A)	/* S18 */
+			MATRIX_KEY(2, 1, KEY_S)	/* S19 */
+			MATRIX_KEY(2, 2, KEY_D)	/* S20 */
+			MATRIX_KEY(2, 3, KEY_F)	/* S21 */
+			MATRIX_KEY(2, 4, KEY_G)	/* S22 */
+			MATRIX_KEY(2, 5, KEY_H)	/* S23 */
+			MATRIX_KEY(2, 6, KEY_J)	/* S24 */
+			MATRIX_KEY(2, 7, KEY_K)	/* S25 */
+			MATRIX_KEY(3, 0, KEY_ESC)	/* S26 */
+			MATRIX_KEY(3, 1, KEY_Z)	/* S27 */
+			MATRIX_KEY(3, 2, KEY_X)	/* S28 */
+			MATRIX_KEY(3, 3, KEY_C)	/* S29 */
+			MATRIX_KEY(3, 4, KEY_V)	/* S30 */
+			MATRIX_KEY(3, 5, KEY_B)	/* S31 */
+			MATRIX_KEY(3, 6, KEY_N)	/* S32 */
+			MATRIX_KEY(3, 7, KEY_M)	/* S33 */
+			MATRIX_KEY(4, 0, KEY_TAB)	/* S34 */
+			MATRIX_KEY(4, 1, KEY_CAPSLOCK)	/* S35 */
+			MATRIX_KEY(4, 2, KEY_BACKSLASH)	/* S36 */
+			MATRIX_KEY(4, 3, KEY_APOSTROPHE)	/* S37 */
+			MATRIX_KEY(4, 4, KEY_COMMA)	/* S38 */
+			MATRIX_KEY(4, 5, KEY_DOT)	/* S39 */
+			MATRIX_KEY(4, 6, KEY_SLASH)	/* S40 */
+			MATRIX_KEY(4, 7, KEY_UP)	/* S41 */
+			MATRIX_KEY(5, 0, KEY_O)	/* S42 */
+			MATRIX_KEY(5, 1, KEY_L)	/* S43 */
+			MATRIX_KEY(5, 2, KEY_EQUAL)	/* S44 */
+			MATRIX_KEY(5, 3, KEY_QI_UPRED)	/* S45 */
+			MATRIX_KEY(5, 4, KEY_SPACE)	/* S46 */
+			MATRIX_KEY(5, 5, KEY_QI_QI)	/* S47 */
+			MATRIX_KEY(5, 6, KEY_RIGHTCTRL)	/* S48 */
+			MATRIX_KEY(5, 7, KEY_LEFT)	/* S49 */
+			MATRIX_KEY(6, 0, KEY_F8)	/* S50 */
+			MATRIX_KEY(6, 1, KEY_P)	/* S51 */
+			MATRIX_KEY(6, 2, KEY_BACKSPACE)/* S52 */
+			MATRIX_KEY(6, 3, KEY_ENTER)	/* S53 */
+			MATRIX_KEY(6, 4, KEY_QI_VOLUP)	/* S54 */
+			MATRIX_KEY(6, 5, KEY_QI_VOLDOWN)	/* S55 */
+			MATRIX_KEY(6, 6, KEY_DOWN)	/* S56 */
+			MATRIX_KEY(6, 7, KEY_RIGHT)	/* S57 */
+
+			MATRIX_KEY(7, 0, KEY_LEFTSHIFT)	/* S58 */
+			MATRIX_KEY(7, 1, KEY_LEFTALT) /* S59 */
+			MATRIX_KEY(7, 2, KEY_QI_FN)	/* S60 */
+			>;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpc 23 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpc 22 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpc 21 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+	};
+
+	usb_charger: charger {
+		compatible = "gpio-charger";
+		charger-type = "usb-sdp";
+		gpios = <&gpd 28 GPIO_ACTIVE_LOW>;
+		status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>;
+	};
+
+	simple_battery: battery {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3600000>;
+		voltage-max-design-microvolt = <4200000>;
+	};
+
+	pmu {
+		compatible = "ingenic,jz4740-battery";
+		io-channels = <&adc INGENIC_ADC_BATTERY>;
+		io-channel-names = "battery";
+		power-supplies = <&usb_charger>;
+		monitored-battery = <&simple_battery>;
+	};
+
+	hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc INGENIC_ADC_AUX>;
+	};
+
+	panel: panel {
+		compatible = "giantplus,gpm940b0";
+
+		power-supply = <&vcc>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&panel_output>;
+			};
+		};
+	};
+
+	usb_phy: usb-phy {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+
+		vcc-supply = <&vcc>;
+	};
 };
 
 &ext {
@@ -24,10 +243,116 @@
 	pinctrl-0 = <&pins_uart0>;
 };
 
+&uart1 {
+	status = "disabled";
+};
+
+&nemc {
+	nandc: nand-controller@1 {
+		compatible = "ingenic,jz4740-nand";
+		reg = <1 0 0x4000000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ingenic,bch-controller = <&ecc>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_nemc>;
+
+		rb-gpios = <&gpc 30 GPIO_ACTIVE_LOW>;
+
+		nand@1 {
+			reg = <1>;
+
+			nand-ecc-step-size = <512>;
+			nand-ecc-strength = <4>;
+			nand-ecc-mode = "hw";
+			nand-is-boot-medium;
+			nand-on-flash-bbt;
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "boot";
+					reg = <0x0 0x400000>;
+				};
+
+				partition@400000 {
+					label = "kernel";
+					reg = <0x400000 0x400000>;
+				};
+
+				partition@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x0>;
+				};
+			};
+		};
+	};
+};
+
+&lcd {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_lcd>;
+
+	port {
+		panel_output: endpoint {
+			remote-endpoint = <&panel_input>;
+		};
+	};
+};
+
+&udc {
+	phys = <&usb_phy>;
+};
+
 &pinctrl {
+	pins_lcd: lcd {
+		function = "lcd";
+		groups = "lcd-8bit";
+	};
+
+	pins_nemc: nemc {
+		function = "nand";
+		groups = "nand-cs1";
+	};
+
 	pins_uart0: uart0 {
 		function = "uart0";
 		groups = "uart0-data";
 		bias-disable;
 	};
+
+	pins_mmc: mmc {
+		mmc {
+			function = "mmc";
+			groups = "mmc-1bit", "mmc-4bit";
+			bias-disable;
+		};
+
+		mmc-gpios {
+			pins = "PD0", "PD2";
+			bias-disable;
+		};
+	};
+};
+
+&mmc {
+	bus-width = <4>;
+	max-frequency = <24000000>;
+	cd-gpios = <&gpd 0 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&mmc_power>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_mmc>;
+};
+
+&tcu {
+	/* 750 kHz for the system timer and clocksource */
+	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>;
+	assigned-clock-rates = <750000>, <750000>;
 };
diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
index 33ae74aaa1bb..797d336db54d 100644
--- a/arch/mips/boot/dts/mscc/ocelot.dtsi
+++ b/arch/mips/boot/dts/mscc/ocelot.dtsi
@@ -120,6 +120,7 @@
 			reg = <0x1010000 0x10000>,
 			      <0x1030000 0x10000>,
 			      <0x1080000 0x100>,
+			      <0x10e0000 0x10000>,
 			      <0x11e0000 0x100>,
 			      <0x11f0000 0x100>,
 			      <0x1200000 0x100>,
@@ -134,12 +135,12 @@
 			      <0x1800000 0x80000>,
 			      <0x1880000 0x10000>,
 			      <0x1060000 0x10000>;
-			reg-names = "sys", "rew", "qs", "port0", "port1",
+			reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
 				    "port2", "port3", "port4", "port5", "port6",
 				    "port7", "port8", "port9", "port10", "qsys",
 				    "ana", "s2";
-			interrupts = <21 22>;
-			interrupt-names = "xtr", "inj";
+			interrupts = <18 21 22>;
+			interrupt-names = "ptp_rdy", "xtr", "inj";
 
 			ethernet-ports {
 				#address-cells = <1>;