ARM: ixp4xx: Delete Coyote and IXDPG425 boardfiles

These boards are replaced with the corresponding device trees.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

5 files changed, 0 insertions, 282 deletions

diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 15860efce09b..0e3e78df484c 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -17,14 +17,6 @@ config MACH_IXP4XX_OF
 	help
 	  Say 'Y' here to support Device Tree-based IXP4xx platforms.
 
-config ARCH_ADI_COYOTE
-	bool "Coyote"
-	depends on IXP4XX_PCI_LEGACY
-	help
-	  Say 'Y' here if you want your kernel to support the ADI 
-	  Engineering Coyote Gateway Reference Platform. For more
-	  information on this platform, see <file:Documentation/arm/ixp4xx.rst>.
-
 config MACH_GATEWAY7001
 	bool "Gateway 7001"
 	depends on IXP4XX_PCI_LEGACY
@@ -33,14 +25,6 @@ config MACH_GATEWAY7001
 	  7001 Access Point. For more information on this platform,
 	  see http://openwrt.org
 
-config MACH_IXDPG425
-	bool "IXDPG425"
-	depends on IXP4XX_PCI_LEGACY
-	help
-	  Say 'Y' here if you want your kernel to support Intel's
-	  IXDPG425 Development Platform (Also known as Montajade).
-	  For more information on this platform, see <file:Documentation/arm/ixp4xx.rst>.
-
 config MACH_GORAMO_MLR
 	bool "GORAMO Multi Link Router"
 	help
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index bea065d76a08..9fc107b89783 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -9,16 +9,12 @@ obj-pci-n	:=
 # Device tree platform
 obj-pci-$(CONFIG_MACH_IXP4XX_OF)	+= ixp4xx-of.o
 
-obj-pci-$(CONFIG_MACH_IXDPG425)		+= ixdpg425-pci.o
-obj-pci-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o
 obj-pci-$(CONFIG_MACH_GTWX5715)		+= gtwx5715-pci.o
 obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
 obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
 
 obj-y	+= common.o
 
-obj-$(CONFIG_MACH_IXDPG425)	+= coyote-setup.o
-obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-setup.o
 obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-setup.o
 obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
 obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c
deleted file mode 100644
index c250b59e8d47..000000000000
--- a/arch/arm/mach-ixp4xx/coyote-pci.c
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-ixp4xx/coyote-pci.c
- *
- * PCI setup routines for ADI Engineering Coyote platform
- *
- * Copyright (C) 2002 Jungo Software Technologies.
- * Copyright (C) 2003 MontaVista Softwrae, Inc.
- *
- * Maintainer: Deepak Saxena <dsaxena@mvista.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-
-#include "irqs.h"
-
-#define SLOT0_DEVID	14
-#define SLOT1_DEVID	15
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define SLOT0_INTA	6
-#define SLOT1_INTA	11
-
-void __init coyote_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT0_INTA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT1_INTA), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static int __init coyote_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (slot == SLOT0_DEVID)
-		return IXP4XX_GPIO_IRQ(SLOT0_INTA);
-	else if (slot == SLOT1_DEVID)
-		return IXP4XX_GPIO_IRQ(SLOT1_INTA);
-	else return -1;
-}
-
-struct hw_pci coyote_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &ixp4xx_ops,
-	.preinit =        coyote_pci_preinit,
-	.setup =          ixp4xx_setup,
-	.map_irq =        coyote_map_irq,
-};
-
-int __init coyote_pci_init(void)
-{
-	if (machine_is_adi_coyote())
-		pci_common_init(&coyote_pci);
-	return 0;
-}
-
-subsys_initcall(coyote_pci_init);
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
deleted file mode 100644
index 7ca43ca2816d..000000000000
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ /dev/null
@@ -1,144 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/arm/mach-ixp4xx/coyote-setup.c
- *
- * Board setup for ADI Engineering and IXDGP425 boards
- *
- * Copyright (C) 2003-2005 MontaVista Software, Inc.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include "irqs.h"
-
-#define COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_BASE(3)
-#define COYOTE_IDE_BASE_VIRT	0xFFFE1000
-#define COYOTE_IDE_REGION_SIZE	0x1000
-
-#define COYOTE_IDE_DATA_PORT	0xFFFE10E0
-#define COYOTE_IDE_CTRL_PORT	0xFFFE10FC
-#define COYOTE_IDE_ERROR_PORT	0xFFFE10E2
-#define IRQ_COYOTE_IDE		IRQ_IXP4XX_GPIO5
-
-static struct flash_platform_data coyote_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource coyote_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device coyote_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &coyote_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &coyote_flash_resource,
-};
-
-static struct resource coyote_uart_resource = {
-	.start	= IXP4XX_UART2_BASE_PHYS,
-	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct plat_serial8250_port coyote_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device coyote_uart = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= coyote_uart_data,
-	},
-	.num_resources	= 1,
-	.resource	= &coyote_uart_resource,
-};
-
-static struct platform_device *coyote_devices[] __initdata = {
-	&coyote_flash,
-	&coyote_uart
-};
-
-static void __init coyote_init(void)
-{
-	ixp4xx_sys_init();
-
-	coyote_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	coyote_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-
-	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
-	if (machine_is_ixdpg425()) {
-		coyote_uart_data[0].membase =
-			(char*)(IXP4XX_UART1_BASE_VIRT + REG_OFFSET);
-		coyote_uart_data[0].mapbase = IXP4XX_UART1_BASE_PHYS;
-		coyote_uart_data[0].irq = IRQ_IXP4XX_UART1;
-	}
-
-	platform_add_devices(coyote_devices, ARRAY_SIZE(coyote_devices));
-}
-
-#ifdef CONFIG_ARCH_ADI_COYOTE
-MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote")
-	/* Maintainer: MontaVista Software, Inc. */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.atag_offset	= 0x100,
-	.init_machine	= coyote_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
-
-/*
- * IXDPG425 is identical to Coyote except for which serial port
- * is connected.
- */
-#ifdef CONFIG_MACH_IXDPG425
-MACHINE_START(IXDPG425, "Intel IXDPG425")
-	/* Maintainer: MontaVista Software, Inc. */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.atag_offset	= 0x100,
-	.init_machine	= coyote_init,
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
-
diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
deleted file mode 100644
index 1cbea65897b2..000000000000
--- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-ixp4xx/ixdpg425-pci.c
- *
- * PCI setup routines for Intel IXDPG425 Platform
- *
- * Copyright (C) 2004 MontaVista Softwrae, Inc.
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-#include <asm/mach/pci.h>
-
-#include "irqs.h"
-
-void __init ixdpg425_pci_preinit(void)
-{
-	irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
-
-	ixp4xx_pci_preinit();
-}
-
-static int __init ixdpg425_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (slot == 12 || slot == 13)
-		return IRQ_IXP4XX_GPIO7;
-	else if (slot == 14)
-		return IRQ_IXP4XX_GPIO6;
-	else return -1;
-}
-
-struct hw_pci ixdpg425_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &ixp4xx_ops,
-	.preinit =        ixdpg425_pci_preinit,
-	.setup =          ixp4xx_setup,
-	.map_irq =        ixdpg425_map_irq,
-};
-
-int __init ixdpg425_pci_init(void)
-{
-	if (machine_is_ixdpg425())
-		pci_common_init(&ixdpg425_pci);
-	return 0;
-}
-
-subsys_initcall(ixdpg425_pci_init);