ARM: EXYNOS: Remove legacy EINT initialization code

This patch removes legacy EINT initialization code that was used to
handle external interrupts when booting with ATAGS, which is not
supported any more.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

1 files changed, 0 insertions, 307 deletions

diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index cb07f4a03483..488d9bd68d2c 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -615,310 +615,3 @@ static void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 	s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no);
 }
-
-static void __iomem *exynos_eint_base;
-
-static DEFINE_SPINLOCK(eint_lock);
-
-static unsigned int eint0_15_data[16];
-
-static inline int exynos4_irq_to_gpio(unsigned int irq)
-{
-	if (irq < IRQ_EINT(0))
-		return -EINVAL;
-
-	irq -= IRQ_EINT(0);
-	if (irq < 8)
-		return EXYNOS4_GPX0(irq);
-
-	irq -= 8;
-	if (irq < 8)
-		return EXYNOS4_GPX1(irq);
-
-	irq -= 8;
-	if (irq < 8)
-		return EXYNOS4_GPX2(irq);
-
-	irq -= 8;
-	if (irq < 8)
-		return EXYNOS4_GPX3(irq);
-
-	return -EINVAL;
-}
-
-static inline int exynos5_irq_to_gpio(unsigned int irq)
-{
-	if (irq < IRQ_EINT(0))
-		return -EINVAL;
-
-	irq -= IRQ_EINT(0);
-	if (irq < 8)
-		return EXYNOS5_GPX0(irq);
-
-	irq -= 8;
-	if (irq < 8)
-		return EXYNOS5_GPX1(irq);
-
-	irq -= 8;
-	if (irq < 8)
-		return EXYNOS5_GPX2(irq);
-
-	irq -= 8;
-	if (irq < 8)
-		return EXYNOS5_GPX3(irq);
-
-	return -EINVAL;
-}
-
-static unsigned int exynos4_eint0_15_src_int[16] = {
-	EXYNOS4_IRQ_EINT0,
-	EXYNOS4_IRQ_EINT1,
-	EXYNOS4_IRQ_EINT2,
-	EXYNOS4_IRQ_EINT3,
-	EXYNOS4_IRQ_EINT4,
-	EXYNOS4_IRQ_EINT5,
-	EXYNOS4_IRQ_EINT6,
-	EXYNOS4_IRQ_EINT7,
-	EXYNOS4_IRQ_EINT8,
-	EXYNOS4_IRQ_EINT9,
-	EXYNOS4_IRQ_EINT10,
-	EXYNOS4_IRQ_EINT11,
-	EXYNOS4_IRQ_EINT12,
-	EXYNOS4_IRQ_EINT13,
-	EXYNOS4_IRQ_EINT14,
-	EXYNOS4_IRQ_EINT15,
-};
-
-static unsigned int exynos5_eint0_15_src_int[16] = {
-	EXYNOS5_IRQ_EINT0,
-	EXYNOS5_IRQ_EINT1,
-	EXYNOS5_IRQ_EINT2,
-	EXYNOS5_IRQ_EINT3,
-	EXYNOS5_IRQ_EINT4,
-	EXYNOS5_IRQ_EINT5,
-	EXYNOS5_IRQ_EINT6,
-	EXYNOS5_IRQ_EINT7,
-	EXYNOS5_IRQ_EINT8,
-	EXYNOS5_IRQ_EINT9,
-	EXYNOS5_IRQ_EINT10,
-	EXYNOS5_IRQ_EINT11,
-	EXYNOS5_IRQ_EINT12,
-	EXYNOS5_IRQ_EINT13,
-	EXYNOS5_IRQ_EINT14,
-	EXYNOS5_IRQ_EINT15,
-};
-static inline void exynos_irq_eint_mask(struct irq_data *data)
-{
-	u32 mask;
-
-	spin_lock(&eint_lock);
-	mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq));
-	mask |= EINT_OFFSET_BIT(data->irq);
-	__raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq));
-	spin_unlock(&eint_lock);
-}
-
-static void exynos_irq_eint_unmask(struct irq_data *data)
-{
-	u32 mask;
-
-	spin_lock(&eint_lock);
-	mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq));
-	mask &= ~(EINT_OFFSET_BIT(data->irq));
-	__raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq));
-	spin_unlock(&eint_lock);
-}
-
-static inline void exynos_irq_eint_ack(struct irq_data *data)
-{
-	__raw_writel(EINT_OFFSET_BIT(data->irq),
-		     EINT_PEND(exynos_eint_base, data->irq));
-}
-
-static void exynos_irq_eint_maskack(struct irq_data *data)
-{
-	exynos_irq_eint_mask(data);
-	exynos_irq_eint_ack(data);
-}
-
-static int exynos_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
-	int offs = EINT_OFFSET(data->irq);
-	int shift;
-	u32 ctrl, mask;
-	u32 newvalue = 0;
-
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		newvalue = S5P_IRQ_TYPE_EDGE_RISING;
-		break;
-
-	case IRQ_TYPE_EDGE_FALLING:
-		newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
-		break;
-
-	case IRQ_TYPE_EDGE_BOTH:
-		newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
-		break;
-
-	case IRQ_TYPE_LEVEL_LOW:
-		newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
-		break;
-
-	case IRQ_TYPE_LEVEL_HIGH:
-		newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
-		break;
-
-	default:
-		printk(KERN_ERR "No such irq type %d", type);
-		return -EINVAL;
-	}
-
-	shift = (offs & 0x7) * 4;
-	mask = 0x7 << shift;
-
-	spin_lock(&eint_lock);
-	ctrl = __raw_readl(EINT_CON(exynos_eint_base, data->irq));
-	ctrl &= ~mask;
-	ctrl |= newvalue << shift;
-	__raw_writel(ctrl, EINT_CON(exynos_eint_base, data->irq));
-	spin_unlock(&eint_lock);
-
-	if (soc_is_exynos5250())
-		s3c_gpio_cfgpin(exynos5_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf));
-	else
-		s3c_gpio_cfgpin(exynos4_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf));
-
-	return 0;
-}
-
-static struct irq_chip exynos_irq_eint = {
-	.name		= "exynos-eint",
-	.irq_mask	= exynos_irq_eint_mask,
-	.irq_unmask	= exynos_irq_eint_unmask,
-	.irq_mask_ack	= exynos_irq_eint_maskack,
-	.irq_ack	= exynos_irq_eint_ack,
-	.irq_set_type	= exynos_irq_eint_set_type,
-#ifdef CONFIG_PM
-	.irq_set_wake	= s3c_irqext_wake,
-#endif
-};
-
-/*
- * exynos4_irq_demux_eint
- *
- * This function demuxes the IRQ from from EINTs 16 to 31.
- * It is designed to be inlined into the specific handler
- * s5p_irq_demux_eintX_Y.
- *
- * Each EINT pend/mask registers handle eight of them.
- */
-static inline void exynos_irq_demux_eint(unsigned int start)
-{
-	unsigned int irq;
-
-	u32 status = __raw_readl(EINT_PEND(exynos_eint_base, start));
-	u32 mask = __raw_readl(EINT_MASK(exynos_eint_base, start));
-
-	status &= ~mask;
-	status &= 0xff;
-
-	while (status) {
-		irq = fls(status) - 1;
-		generic_handle_irq(irq + start);
-		status &= ~(1 << irq);
-	}
-}
-
-static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_get_chip(irq);
-	chained_irq_enter(chip, desc);
-	exynos_irq_demux_eint(IRQ_EINT(16));
-	exynos_irq_demux_eint(IRQ_EINT(24));
-	chained_irq_exit(chip, desc);
-}
-
-static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
-{
-	u32 *irq_data = irq_get_handler_data(irq);
-	struct irq_chip *chip = irq_get_chip(irq);
-
-	chained_irq_enter(chip, desc);
-	generic_handle_irq(*irq_data);
-	chained_irq_exit(chip, desc);
-}
-
-static int __init exynos_init_irq_eint(void)
-{
-	int irq;
-
-#ifdef CONFIG_PINCTRL_SAMSUNG
-	/*
-	 * The Samsung pinctrl driver provides an integrated gpio/pinmux/pinconf
-	 * functionality along with support for external gpio and wakeup
-	 * interrupts. If the samsung pinctrl driver is enabled and includes
-	 * the wakeup interrupt support, then the setting up external wakeup
-	 * interrupts here can be skipped. This check here is temporary to
-	 * allow exynos4 platforms that do not use Samsung pinctrl driver to
-	 * co-exist with platforms that do. When all of the Samsung Exynos4
-	 * platforms switch over to using the pinctrl driver, the wakeup
-	 * interrupt support code here can be completely removed.
-	 */
-	static const struct of_device_id exynos_pinctrl_ids[] = {
-		{ .compatible = "samsung,exynos4210-pinctrl", },
-		{ .compatible = "samsung,exynos4x12-pinctrl", },
-		{ .compatible = "samsung,exynos5250-pinctrl", },
-	};
-	struct device_node *pctrl_np, *wkup_np;
-	const char *wkup_compat = "samsung,exynos4210-wakeup-eint";
-
-	for_each_matching_node(pctrl_np, exynos_pinctrl_ids) {
-		if (of_device_is_available(pctrl_np)) {
-			wkup_np = of_find_compatible_node(pctrl_np, NULL,
-							wkup_compat);
-			if (wkup_np)
-				return -ENODEV;
-		}
-	}
-#endif
-	if (soc_is_exynos5440())
-		return 0;
-
-	if (soc_is_exynos5250())
-		exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K);
-	else
-		exynos_eint_base = ioremap(EXYNOS4_PA_GPIO2, SZ_4K);
-
-	if (exynos_eint_base == NULL) {
-		pr_err("unable to ioremap for EINT base address\n");
-		return -ENOMEM;
-	}
-
-	for (irq = 0 ; irq <= 31 ; irq++) {
-		irq_set_chip_and_handler(IRQ_EINT(irq), &exynos_irq_eint,
-					 handle_level_irq);
-		set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
-	}
-
-	irq_set_chained_handler(EXYNOS_IRQ_EINT16_31, exynos_irq_demux_eint16_31);
-
-	for (irq = 0 ; irq <= 15 ; irq++) {
-		eint0_15_data[irq] = IRQ_EINT(irq);
-
-		if (soc_is_exynos5250()) {
-			irq_set_handler_data(exynos5_eint0_15_src_int[irq],
-					     &eint0_15_data[irq]);
-			irq_set_chained_handler(exynos5_eint0_15_src_int[irq],
-						exynos_irq_eint0_15);
-		} else {
-			irq_set_handler_data(exynos4_eint0_15_src_int[irq],
-					     &eint0_15_data[irq]);
-			irq_set_chained_handler(exynos4_eint0_15_src_int[irq],
-						exynos_irq_eint0_15);
-		}
-	}
-
-	return 0;
-}
-arch_initcall(exynos_init_irq_eint);