Merge tag 'mmc-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Fixup processing of SDIO IRQs during system suspend/resume
   - Add helper function to indicate if SDIO IRQs is enabled

  MMC host:
   - bcm2835: Take SWIOTLB memory size limitation into account
   - dw_mmc: Improve SDIO IRQs support
   - mtk-sd: Various improvements
   - mtk-sd: Improve SDIO IRQs support
   - sdhci-iproc: Add support for emmc2 of the BCM2711
   - sdhci-of-arasan: Add Support for Intel LGM eMMC
   - sdhci-of-aspeed: Add support for the ASPEED SD controller
   - sdhci-of-esdhc: Deal with erratum A011334 support in ls1028a 1.0 SoC
   - sdhci-pci: Prepare to add support of Genesys Logic GL975x
   - sdhci-pci: Add another Id for Intel CML
   - sdhci-pci-o2micro: Fix O2 Host data read/write DLL Lock phase shift issue
   - sunxi: Add support for H5 compatibles"

* tag 'mmc-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
  ms_block: fix spelling mistake "randomally" -> "randomly"
  mmc: dw_mmc: hi3798cv200: make array degrees static const, makes object smaller
  mmc: sdhci: Convert to use sdio_irq_claimed()
  mmc: sdhci: Drop redundant code for SDIO IRQs
  mmc: sdhci: Drop redundant check in sdhci_ack_sdio_irq()
  mmc: core: Fixup processing of SDIO IRQs during system suspend/resume
  mmc: core: WARN if SDIO IRQs are enabled for non-powered card in suspend
  mmc: core: Clarify that the ->ack_sdio_irq() callback is mandatory
  mmc: core: Clarify sdio_irq_pending flag for MMC_CAP2_SDIO_IRQ_NOTHREAD
  mmc: core: Move code to get pending SDIO IRQs to a function
  mmc: mtk-sd: Re-store SDIO IRQs mask at system resume
  mmc: dw_mmc: Re-store SDIO IRQs mask at system resume
  mmc: core: Add helper function to indicate if SDIO IRQs is enabled
  mmc: sdhci-pci-o2micro: Fix O2 Host data read/write DLL Lock phase shift issue
  mmc: sdhci-pci-o2micro: Move functions in preparation to fix DLL lock phase shift issue
  mmc: sdhci-pci-o2micro: Change O2 Host PLL and DLL register name
  mmc: sdhci: Fix incorrect switch to HS mode
  mmc: sdhci-of-aspeed: Depend on CONFIG_OF_ADDRESS
  mmc: sdhci-of-aspeed: Allow max-frequency limitation of SDCLK
  mmc: sdhci-of-aspeed: Uphold clocks-on post-condition of set_clock()
  ...

4 files changed, 136 insertions, 5 deletions

diff --git a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml
index df0280edef97..d2d4308596b8 100644
--- a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml
@@ -30,16 +30,22 @@ properties:
           - const: allwinner,sun8i-a83t-mmc
           - const: allwinner,sun7i-a20-mmc
       - items:
-          - const: allwinner,sun50i-h6-emmc
+          - const: allwinner,sun8i-r40-emmc
           - const: allwinner,sun50i-a64-emmc
       - items:
-          - const: allwinner,sun50i-h6-mmc
+          - const: allwinner,sun8i-r40-mmc
           - const: allwinner,sun50i-a64-mmc
       - items:
-          - const: allwinner,sun8i-r40-emmc
+          - const: allwinner,sun50i-h5-emmc
           - const: allwinner,sun50i-a64-emmc
       - items:
-          - const: allwinner,sun8i-r40-mmc
+          - const: allwinner,sun50i-h5-mmc
+          - const: allwinner,sun50i-a64-mmc
+      - items:
+          - const: allwinner,sun50i-h6-emmc
+          - const: allwinner,sun50i-a64-emmc
+      - items:
+          - const: allwinner,sun50i-h6-mmc
           - const: allwinner,sun50i-a64-mmc
 
   reg:
diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
index 1edbb049cccb..7ca0aa7ccc0b 100644
--- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
@@ -17,6 +17,8 @@ Required Properties:
       For this device it is strongly suggested to include arasan,soc-ctl-syscon.
     - "ti,am654-sdhci-5.1", "arasan,sdhci-5.1": TI AM654 MMC PHY
 	Note: This binding has been deprecated and moved to [5].
+    - "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1": Intel LGM eMMC PHY
+      For this device it is strongly suggested to include arasan,soc-ctl-syscon.
 
   [5] Documentation/devicetree/bindings/mmc/sdhci-am654.txt
 
@@ -80,3 +82,18 @@ Example:
 		phy-names = "phy_arasan";
 		#clock-cells = <0>;
 	};
+
+	emmc: sdhci@ec700000 {
+		compatible = "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1";
+		reg = <0xec700000 0x300>;
+		interrupt-parent = <&ioapic1>;
+		interrupts = <44 1>;
+		clocks = <&cgu0 LGM_CLK_EMMC5>, <&cgu0 LGM_CLK_NGI>,
+			 <&cgu0 LGM_GCLK_EMMC>;
+		clock-names = "clk_xin", "clk_ahb", "gate";
+		clock-output-names = "emmc_cardclock";
+		#clock-cells = <0>;
+		phys = <&emmc_phy>;
+		phy-names = "phy_arasan";
+		arasan,soc-ctl-syscon = <&sysconf>;
+	};
diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
new file mode 100644
index 000000000000..200de9396036
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright 2019 IBM Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED SD/SDIO/MMC Controller
+
+maintainers:
+  - Andrew Jeffery <andrew@aj.id.au>
+  - Ryan Chen <ryanchen.aspeed@gmail.com>
+
+description: |+
+  The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the SDIO
+  Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit data bus if
+  only a single slot is enabled.
+
+  The two slots are supported by a common configuration area. As the SDHCIs for
+  the slots are dependent on the common configuration area, they are described
+  as child nodes.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-sd-controller
+      - aspeed,ast2500-sd-controller
+      - aspeed,ast2600-sd-controller
+  reg:
+    maxItems: 1
+    description: Common configuration registers
+  "#address-cells":
+    const: 1
+  "#size-cells":
+    const: 1
+  ranges: true
+  clocks:
+    maxItems: 1
+    description: The SD/SDIO controller clock gate
+
+patternProperties:
+  "^sdhci@[0-9a-f]+$":
+    type: object
+    allOf:
+        - $ref: mmc-controller.yaml
+    properties:
+      compatible:
+        enum:
+          - aspeed,ast2400-sdhci
+          - aspeed,ast2500-sdhci
+          - aspeed,ast2600-sdhci
+      reg:
+        maxItems: 1
+        description: The SDHCI registers
+      clocks:
+        maxItems: 1
+        description: The SD bus clock
+      interrupts:
+        maxItems: 1
+        description: The SD interrupt shared between both slots
+      sdhci,auto-cmd12:
+        type: boolean
+        description: Specifies that controller should use auto CMD12
+    required:
+      - compatible
+      - reg
+      - clocks
+      - interrupts
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - clocks
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    sdc@1e740000 {
+            compatible = "aspeed,ast2500-sd-controller";
+            reg = <0x1e740000 0x100>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0 0x1e740000 0x20000>;
+            clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+
+            sdhci0: sdhci@100 {
+                    compatible = "aspeed,ast2500-sdhci";
+                    reg = <0x100 0x100>;
+                    interrupts = <26>;
+                    sdhci,auto-cmd12;
+                    clocks = <&syscon ASPEED_CLK_SDIO>;
+            };
+
+            sdhci1: sdhci@200 {
+                    compatible = "aspeed,ast2500-sdhci";
+                    reg = <0x200 0x100>;
+                    interrupts = <26>;
+                    sdhci,auto-cmd12;
+                    clocks = <&syscon ASPEED_CLK_SDIO>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
index fa90d253dc7e..09d87cc1182a 100644
--- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
+++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
@@ -6,10 +6,12 @@ by mmc.txt and the properties that represent the IPROC SDHCI controller.
 Required properties:
 - compatible : Should be one of the following
 	       "brcm,bcm2835-sdhci"
+	       "brcm,bcm2711-emmc2"
 	       "brcm,sdhci-iproc-cygnus"
 	       "brcm,sdhci-iproc"
 
-Use brcm2835-sdhci for Rasperry PI.
+Use brcm2835-sdhci for the eMMC controller on the BCM2835 (Raspberry Pi) and
+bcm2711-emmc2 for the additional eMMC2 controller on BCM2711.
 
 Use sdhci-iproc-cygnus for Broadcom SDHCI Controllers
 restricted to 32bit host accesses to SDHCI registers.