Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev into drm-next

Commit "drm/rcar-du: Use struct videomode in platform data" touches board code
in arch/arm/mach-shmobile. There is, to the best of my knowledge, no risk of
conflict for v3.18. Simon, are you fine with getting those changes merged
through Dave's tree (and could you confirm that no conflict should occur) ?

Simon acked the merge:
Acked-by: Simon Horman <horms+renesas@verge.net.au>

* 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev:
  drm/rcar-du: Add OF support
  drm/rcar-du: Use struct videomode in platform data
  video: Add DT bindings for the R-Car Display Unit
  video: Add THC63LVDM83D DT bindings documentation
  video: Add ADV7123 DT bindings documentation
  video: Add DT binding documentation for VGA connector
  devicetree: Add vendor prefix "thine" to vendor-prefixes.txt
  devicetree: Add vendor prefix "mitsubishi" to vendor-prefixes.txt
  drm/shmob: Update copyright notice
  drm/rcar-du: Update copyright notice

5 files changed, 222 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ac7269f90764..2b5648b1ce1d 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -83,6 +83,7 @@ maxim	Maxim Integrated Products
 mediatek	MediaTek Inc.
 micrel	Micrel Inc.
 microchip	Microchip Technology Inc.
+mitsubishi	Mitsubishi Electric Corporation
 mosaixtech	Mosaix Technologies, Inc.
 moxa	Moxa
 mpl	MPL AG
@@ -133,6 +134,7 @@ st	STMicroelectronics
 ste	ST-Ericsson
 stericsson	ST-Ericsson
 synology	Synology, Inc.
+thine	THine Electronics, Inc.
 ti	Texas Instruments
 tlm	Trusted Logic Mobility
 toradex	Toradex AG
diff --git a/Documentation/devicetree/bindings/video/adi,adv7123.txt b/Documentation/devicetree/bindings/video/adi,adv7123.txt
new file mode 100644
index 000000000000..a6b2b2b8f3d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/adi,adv7123.txt
@@ -0,0 +1,50 @@
+Analog Device ADV7123 Video DAC
+-------------------------------
+
+The ADV7123 is a digital-to-analog converter that outputs VGA signals from a
+parallel video input.
+
+Required properties:
+
+- compatible: Should be "adi,adv7123"
+
+Optional properties:
+
+- psave-gpios: Power save control GPIO
+
+Required nodes:
+
+The ADV7123 has two video ports. Their connections are modeled using the OF
+graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 for DPI input
+- Video port 1 for VGA output
+
+
+Example
+-------
+
+	adv7123: encoder@0 {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7123_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7123_out: endpoint@0 {
+					remote-endpoint = <&vga_connector_in>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/video/renesas,du.txt b/Documentation/devicetree/bindings/video/renesas,du.txt
new file mode 100644
index 000000000000..5102830f2760
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/renesas,du.txt
@@ -0,0 +1,84 @@
+* Renesas R-Car Display Unit (DU)
+
+Required Properties:
+
+  - compatible: must be one of the following.
+    - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
+    - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
+    - "renesas,du-r8a7791" for R8A7791 (R-Car M2) compatible DU
+
+  - reg: A list of base address and length of each memory resource, one for
+    each entry in the reg-names property.
+  - reg-names: Name of the memory resources. The DU requires one memory
+    resource for the DU core (named "du") and one memory resource for each
+    LVDS encoder (named "lvds.x" with "x" being the LVDS controller numerical
+    index).
+
+  - interrupt-parent: phandle of the parent interrupt controller.
+  - interrupts: Interrupt specifiers for the DU interrupts.
+
+  - clocks: A list of phandles + clock-specifier pairs, one for each entry in
+    the clock-names property.
+  - clock-names: Name of the clocks. This property is model-dependent.
+    - R8A7779 uses a single functional clock. The clock doesn't need to be
+      named.
+    - R8A7790 and R8A7791 use one functional clock per channel and one clock
+      per LVDS encoder. The functional clocks must be named "du.x" with "x"
+      being the channel numerical index. The LVDS clocks must be named
+      "lvds.x" with "x" being the LVDS encoder numerical index.
+
+Required nodes:
+
+The connections to the DU output video ports are modeled using the OF graph
+bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+The following table lists for each supported model the port number
+corresponding to each DU output.
+
+		Port 0		Port1		Port2
+-----------------------------------------------------------------------------
+ R8A7779 (H1)	DPAD 0		DPAD 1		-
+ R8A7790 (H2)	DPAD		LVDS 0		LVDS 1
+ R8A7791 (M2)	DPAD		LVDS 0		-
+
+
+Example: R8A7790 (R-Car H2) DU
+
+	du: du@feb00000 {
+		compatible = "renesas,du-r8a7790";
+		reg = <0 0xfeb00000 0 0x70000>,
+		      <0 0xfeb90000 0 0x1c>,
+		      <0 0xfeb94000 0 0x1c>;
+		reg-names = "du", "lvds.0", "lvds.1";
+		interrupt-parent = <&gic>;
+		interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 268 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 269 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_DU0>,
+		         <&mstp7_clks R8A7790_CLK_DU1>,
+		         <&mstp7_clks R8A7790_CLK_DU2>,
+		         <&mstp7_clks R8A7790_CLK_LVDS0>,
+		         <&mstp7_clks R8A7790_CLK_LVDS1>;
+		clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				du_out_rgb: endpoint {
+				};
+			};
+			port@1 {
+				reg = <1>;
+				du_out_lvds0: endpoint {
+				};
+			};
+			port@2 {
+				reg = <2>;
+				du_out_lvds1: endpoint {
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/video/thine,thc63lvdm83d b/Documentation/devicetree/bindings/video/thine,thc63lvdm83d
new file mode 100644
index 000000000000..527e236e9a2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/thine,thc63lvdm83d
@@ -0,0 +1,50 @@
+THine Electronics THC63LVDM83D LVDS serializer
+----------------------------------------------
+
+The THC63LVDM83D is an LVDS serializer designed to support pixel data
+transmission between a host and a flat panel.
+
+Required properties:
+
+- compatible: Should be "thine,thc63lvdm83d"
+
+Optional properties:
+
+- pwdn-gpios: Power down control GPIO
+
+Required nodes:
+
+The THC63LVDM83D has two video ports. Their connections are modeled using the
+OFgraph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 for CMOS/TTL input
+- Video port 1 for LVDS output
+
+
+Example
+-------
+
+	lvds_enc: encoder@0 {
+		compatible = "thine,thc63lvdm83d";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_enc_in: endpoint@0 {
+					remote-endpoint = <&rgb_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_enc_out: endpoint@0 {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/video/vga-connector.txt b/Documentation/devicetree/bindings/video/vga-connector.txt
new file mode 100644
index 000000000000..c727f298e7ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/vga-connector.txt
@@ -0,0 +1,36 @@
+VGA Connector
+=============
+
+Required properties:
+
+- compatible: "vga-connector"
+
+Optional properties:
+
+- label: a symbolic name for the connector corresponding to a hardware label
+- ddc-i2c-bus: phandle to the I2C bus that is connected to VGA DDC
+
+Required nodes:
+
+The VGA connector internal connections are modeled using the OF graph bindings
+specified in Documentation/devicetree/bindings/graph.txt.
+
+The VGA connector has a single port that must be connected to a video source
+port.
+
+
+Example
+-------
+
+vga0: connector@0 {
+	compatible = "vga-connector";
+	label = "vga";
+
+	ddc-i2c-bus = <&i2c3>;
+
+	port {
+		vga_connector_in: endpoint {
+			remote-endpoint = <&adv7123_out>;
+		};
+	};
+};