diff options
author | Stanislav Jakubek <stano.jakubek@gmail.com> | 2023-07-30 17:23:32 +0200 |
---|---|---|
committer | Bartosz Golaszewski <bartosz.golaszewski@linaro.org> | 2023-08-01 21:23:50 +0200 |
commit | b0c488615eb147d3f680ad3c2e2200a1502da1fc (patch) | |
tree | c8cdc87b6f9b9a3bc7667926defa4967b498385a /Documentation/devicetree/bindings/gpio | |
parent | 5f57665a217e82ca5e5362829f64b526d2f245c5 (diff) |
dt-bindings: gpio: brcm,kona-gpio: convert to YAML
Convert Broadcom Kona family GPIO controller bindings to DT schema.
Changes during conversion:
- add used, but previously undocumented SoC-specific compatibles
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Diffstat (limited to 'Documentation/devicetree/bindings/gpio')
-rw-r--r-- | Documentation/devicetree/bindings/gpio/brcm,kona-gpio.txt | 52 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/gpio/brcm,kona-gpio.yaml | 100 |
2 files changed, 100 insertions, 52 deletions
diff --git a/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.txt deleted file mode 100644 index 4a63bc96b687..000000000000 --- a/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.txt +++ /dev/null @@ -1,52 +0,0 @@ -Broadcom Kona Family GPIO -========================= - -This GPIO driver is used in the following Broadcom SoCs: - BCM11130, BCM11140, BCM11351, BCM28145, BCM28155 - -The Broadcom GPIO Controller IP can be configured prior to synthesis to -support up to 8 banks of 32 GPIOs where each bank has its own IRQ. The -GPIO controller only supports edge, not level, triggering of interrupts. - -Required properties -------------------- - -- compatible: "brcm,bcm11351-gpio", "brcm,kona-gpio" -- reg: Physical base address and length of the controller's registers. -- interrupts: The interrupt outputs from the controller. There is one GPIO - interrupt per GPIO bank. The number of interrupts listed depends on the - number of GPIO banks on the SoC. The interrupts must be ordered by bank, - starting with bank 0. There is always a 1:1 mapping between banks and - IRQs. -- #gpio-cells: Should be <2>. The first cell is the pin number, the second - cell is used to specify optional parameters: - - bit 0 specifies polarity (0 for normal, 1 for inverted) - See also "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt. -- #interrupt-cells: Should be <2>. The first cell is the GPIO number. The - second cell is used to specify flags. The following subset of flags is - supported: - - trigger type (bits[1:0]): - 1 = low-to-high edge triggered. - 2 = high-to-low edge triggered. - 3 = low-to-high or high-to-low edge triggered - Valid values are 1, 2, 3 - See also .../devicetree/bindings/interrupt-controller/interrupts.txt. -- gpio-controller: Marks the device node as a GPIO controller. -- interrupt-controller: Marks the device node as an interrupt controller. - -Example: - gpio: gpio@35003000 { - compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio"; - reg = <0x35003000 0x800>; - interrupts = - <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - #interrupt-cells = <2>; - gpio-controller; - interrupt-controller; - }; diff --git a/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.yaml new file mode 100644 index 000000000000..296fdd6b8f38 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/brcm,kona-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Kona family GPIO controller + +description: + The Broadcom GPIO Controller IP can be configured prior to synthesis to + support up to 8 banks of 32 GPIOs where each bank has its own IRQ. The + GPIO controller only supports edge, not level, triggering of interrupts. + +maintainers: + - Ray Jui <rjui@broadcom.com> + +properties: + compatible: + items: + - enum: + - brcm,bcm11351-gpio + - brcm,bcm21664-gpio + - brcm,bcm23550-gpio + - const: brcm,kona-gpio + + reg: + maxItems: 1 + + interrupts: + minItems: 4 + maxItems: 6 + description: + The interrupt outputs from the controller. There is one GPIO interrupt + per GPIO bank. The number of interrupts listed depends on the number of + GPIO banks on the SoC. The interrupts must be ordered by bank, starting + with bank 0. There is always a 1:1 mapping between banks and IRQs. + + '#gpio-cells': + const: 2 + + '#interrupt-cells': + const: 2 + + gpio-controller: true + + interrupt-controller: true + +required: + - compatible + - reg + - interrupts + - '#gpio-cells' + - '#interrupt-cells' + - gpio-controller + - interrupt-controller + +allOf: + - if: + properties: + compatible: + contains: + const: brcm,bcm11351-gpio + then: + properties: + interrupts: + minItems: 6 + - if: + properties: + compatible: + contains: + enum: + - brcm,bcm21664-gpio + - brcm,bcm23550-gpio + then: + properties: + interrupts: + maxItems: 4 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + gpio@35003000 { + compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio"; + reg = <0x35003000 0x800>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + }; +... |