gpiolib: remove asm-generic/gpio.h

The asm-generic/gpio.h file is now always included when
using gpiolib, so just move its contents into linux/gpio.h
with a few minor simplifications.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

6 files changed, 85 insertions, 161 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 8d5bc223f305..ddf686c2e546 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8752,7 +8752,6 @@ F:	Documentation/admin-guide/gpio/
 F:	Documentation/devicetree/bindings/gpio/
 F:	Documentation/driver-api/gpio/
 F:	drivers/gpio/
-F:	include/asm-generic/gpio.h
 F:	include/dt-bindings/gpio/
 F:	include/linux/gpio.h
 F:	include/linux/gpio/
diff --git a/arch/m68k/include/asm/mcfgpio.h b/arch/m68k/include/asm/mcfgpio.h
index 27f32cc81da6..2cefe8445980 100644
--- a/arch/m68k/include/asm/mcfgpio.h
+++ b/arch/m68k/include/asm/mcfgpio.h
@@ -9,7 +9,7 @@
 #define mcfgpio_h
 
 #ifdef CONFIG_GPIOLIB
-#include <asm-generic/gpio.h>
+#include <linux/gpio.h>
 #else
 
 int __mcfgpio_get_value(unsigned gpio);
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index 26b1f7465e09..7fc83057990a 100644
--- a/drivers/gpio/gpio-davinci.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -24,8 +24,6 @@
 #include <linux/spinlock.h>
 #include <linux/pm_runtime.h>
 
-#include <asm-generic/gpio.h>
-
 #define MAX_REGS_BANKS 5
 #define MAX_INT_PER_BANK 32
 
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index d6e6c751255f..401886c81344 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -30,7 +30,6 @@
 
 #ifdef CONFIG_GPIOLIB
 #include "../gpio/gpiolib.h"
-#include <asm-generic/gpio.h>
 #endif
 
 #include "core.h"
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
deleted file mode 100644
index 1c910d124423..000000000000
--- a/include/asm-generic/gpio.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_GENERIC_GPIO_H
-#define _ASM_GENERIC_GPIO_H
-
-#include <linux/types.h>
-#include <linux/errno.h>
-
-#ifdef CONFIG_GPIOLIB
-
-#include <linux/compiler.h>
-#include <linux/gpio/consumer.h>
-
-/*
- * Platforms may implement their GPIO interface with library code,
- * at a small performance cost for non-inlined operations and some
- * extra memory (for code and for per-GPIO table entries).
- */
-
-/*
- * At the end we want all GPIOs to be dynamically allocated from 0.
- * However, some legacy drivers still perform fixed allocation.
- * Until they are all fixed, leave 0-512 space for them.
- */
-#define GPIO_DYNAMIC_BASE	512
-
-struct device;
-struct gpio;
-struct seq_file;
-struct module;
-struct device_node;
-struct gpio_desc;
-
-/* Always use the library code for GPIO management calls,
- * or when sleeping may be involved.
- */
-extern int gpio_request(unsigned gpio, const char *label);
-extern void gpio_free(unsigned gpio);
-
-static inline int gpio_direction_input(unsigned gpio)
-{
-	return gpiod_direction_input(gpio_to_desc(gpio));
-}
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-	return gpiod_direction_output_raw(gpio_to_desc(gpio), value);
-}
-
-static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
-{
-	return gpiod_set_debounce(gpio_to_desc(gpio), debounce);
-}
-
-static inline int gpio_get_value_cansleep(unsigned gpio)
-{
-	return gpiod_get_raw_value_cansleep(gpio_to_desc(gpio));
-}
-static inline void gpio_set_value_cansleep(unsigned gpio, int value)
-{
-	return gpiod_set_raw_value_cansleep(gpio_to_desc(gpio), value);
-}
-
-
-/* A platform's <asm/gpio.h> code may want to inline the I/O calls when
- * the GPIO is constant and refers to some always-present controller,
- * giving direct access to chip registers and tight bitbanging loops.
- */
-static inline int __gpio_get_value(unsigned gpio)
-{
-	return gpiod_get_raw_value(gpio_to_desc(gpio));
-}
-static inline void __gpio_set_value(unsigned gpio, int value)
-{
-	return gpiod_set_raw_value(gpio_to_desc(gpio), value);
-}
-
-static inline int __gpio_cansleep(unsigned gpio)
-{
-	return gpiod_cansleep(gpio_to_desc(gpio));
-}
-
-static inline int __gpio_to_irq(unsigned gpio)
-{
-	return gpiod_to_irq(gpio_to_desc(gpio));
-}
-
-extern int gpio_request_one(unsigned gpio, unsigned long flags, const char *label);
-extern int gpio_request_array(const struct gpio *array, size_t num);
-extern void gpio_free_array(const struct gpio *array, size_t num);
-
-/*
- * A sysfs interface can be exported by individual drivers if they want,
- * but more typically is configured entirely from userspace.
- */
-static inline int gpio_export(unsigned gpio, bool direction_may_change)
-{
-	return gpiod_export(gpio_to_desc(gpio), direction_may_change);
-}
-
-static inline void gpio_unexport(unsigned gpio)
-{
-	gpiod_unexport(gpio_to_desc(gpio));
-}
-
-#else	/* !CONFIG_GPIOLIB */
-
-#include <linux/kernel.h>
-
-/* platforms that don't directly support access to GPIOs through I2C, SPI,
- * or other blocking infrastructure can use these wrappers.
- */
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	return 0;
-}
-
-static inline int gpio_get_value_cansleep(unsigned gpio)
-{
-	might_sleep();
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value_cansleep(unsigned gpio, int value)
-{
-	might_sleep();
-	__gpio_set_value(gpio, value);
-}
-
-#endif /* !CONFIG_GPIOLIB */
-
-/*
- * "valid" GPIO numbers are nonnegative and may be passed to
- * setup routines like gpio_request().  only some valid numbers
- * can successfully be requested and used.
- *
- * Invalid GPIO numbers are useful for indicating no-such-GPIO in
- * platform data and other tables.
- */
-
-static inline bool gpio_is_valid(int number)
-{
-	/* only non-negative numbers are valid */
-	return number >= 0;
-}
-
-#endif /* _ASM_GENERIC_GPIO_H */
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index 2b75017b3aad..d5ce78e2bdd9 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -13,6 +13,7 @@
 #define __LINUX_GPIO_H
 
 #include <linux/errno.h>
+#include <linux/types.h>
 
 /* see Documentation/driver-api/gpio/legacy.rst */
 
@@ -54,26 +55,100 @@ struct gpio {
 };
 
 #ifdef CONFIG_GPIOLIB
-#include <asm-generic/gpio.h>
 
-static inline int gpio_get_value(unsigned int gpio)
+#include <linux/gpio/consumer.h>
+
+/*
+ * "valid" GPIO numbers are nonnegative and may be passed to
+ * setup routines like gpio_request().  Only some valid numbers
+ * can successfully be requested and used.
+ *
+ * Invalid GPIO numbers are useful for indicating no-such-GPIO in
+ * platform data and other tables.
+ */
+static inline bool gpio_is_valid(int number)
+{
+	/* only non-negative numbers are valid */
+	return number >= 0;
+}
+
+/*
+ * Platforms may implement their GPIO interface with library code,
+ * at a small performance cost for non-inlined operations and some
+ * extra memory (for code and for per-GPIO table entries).
+ */
+
+/*
+ * At the end we want all GPIOs to be dynamically allocated from 0.
+ * However, some legacy drivers still perform fixed allocation.
+ * Until they are all fixed, leave 0-512 space for them.
+ */
+#define GPIO_DYNAMIC_BASE	512
+
+/* Always use the library code for GPIO management calls,
+ * or when sleeping may be involved.
+ */
+int gpio_request(unsigned gpio, const char *label);
+void gpio_free(unsigned gpio);
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+	return gpiod_direction_input(gpio_to_desc(gpio));
+}
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+	return gpiod_direction_output_raw(gpio_to_desc(gpio), value);
+}
+
+static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
+{
+	return gpiod_set_debounce(gpio_to_desc(gpio), debounce);
+}
+
+static inline int gpio_get_value_cansleep(unsigned gpio)
+{
+	return gpiod_get_raw_value_cansleep(gpio_to_desc(gpio));
+}
+static inline void gpio_set_value_cansleep(unsigned gpio, int value)
 {
-	return __gpio_get_value(gpio);
+	return gpiod_set_raw_value_cansleep(gpio_to_desc(gpio), value);
 }
 
-static inline void gpio_set_value(unsigned int gpio, int value)
+static inline int gpio_get_value(unsigned gpio)
+{
+	return gpiod_get_raw_value(gpio_to_desc(gpio));
+}
+static inline void gpio_set_value(unsigned gpio, int value)
 {
-	__gpio_set_value(gpio, value);
+	return gpiod_set_raw_value(gpio_to_desc(gpio), value);
 }
 
-static inline int gpio_cansleep(unsigned int gpio)
+static inline int gpio_cansleep(unsigned gpio)
 {
-	return __gpio_cansleep(gpio);
+	return gpiod_cansleep(gpio_to_desc(gpio));
 }
 
-static inline int gpio_to_irq(unsigned int gpio)
+static inline int gpio_to_irq(unsigned gpio)
 {
-	return __gpio_to_irq(gpio);
+	return gpiod_to_irq(gpio_to_desc(gpio));
+}
+
+int gpio_request_one(unsigned gpio, unsigned long flags, const char *label);
+int gpio_request_array(const struct gpio *array, size_t num);
+void gpio_free_array(const struct gpio *array, size_t num);
+
+/*
+ * A sysfs interface can be exported by individual drivers if they want,
+ * but more typically is configured entirely from userspace.
+ */
+static inline int gpio_export(unsigned gpio, bool direction_may_change)
+{
+	return gpiod_export(gpio_to_desc(gpio), direction_may_change);
+}
+
+static inline void gpio_unexport(unsigned gpio)
+{
+	gpiod_unexport(gpio_to_desc(gpio));
 }
 
 /* CONFIG_GPIOLIB: bindings for managed devices that want to request gpios */
@@ -88,7 +163,6 @@ int devm_gpio_request_one(struct device *dev, unsigned gpio,
 
 #include <linux/bug.h>
 #include <linux/kernel.h>
-#include <linux/types.h>
 
 struct device;
 struct gpio_chip;