V4L/DVB (4961): Add support for the ASUS P7131 remote control

Besides adding the board specific code, this patch moves
the RC5 decoding code from bt8xx to ir-functions.c to make it available 
for all drivers.

Signed-off-by: Marc Fargas <telenieko.telenieko.com>
Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

9 files changed, 315 insertions, 172 deletions

diff --git a/drivers/media/common/ir-functions.c b/drivers/media/common/ir-functions.c
index 9a8dd8764c99..cbf7c0564889 100644
--- a/drivers/media/common/ir-functions.c
+++ b/drivers/media/common/ir-functions.c
@@ -256,6 +256,112 @@ int ir_decode_biphase(u32 *samples, int count, int low, int high)
 	return value;
 }
 
+/* RC5 decoding stuff, moved from bttv-input.c to share it with
+ * saa7134 */
+
+/* decode raw bit pattern to RC5 code */
+u32 ir_rc5_decode(unsigned int code)
+{
+	unsigned int org_code = code;
+	unsigned int pair;
+	unsigned int rc5 = 0;
+	int i;
+
+	for (i = 0; i < 14; ++i) {
+		pair = code & 0x3;
+		code >>= 2;
+
+		rc5 <<= 1;
+		switch (pair) {
+		case 0:
+		case 2:
+			break;
+		case 1:
+			rc5 |= 1;
+			break;
+		case 3:
+			dprintk(1, "ir-common: ir_rc5_decode(%x) bad code\n", org_code);
+			return 0;
+		}
+	}
+	dprintk(1, "ir-common: code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
+		"instr=%x\n", rc5, org_code, RC5_START(rc5),
+		RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
+	return rc5;
+}
+
+void ir_rc5_timer_end(unsigned long data)
+{
+	struct card_ir *ir = (struct card_ir *)data;
+	struct timeval tv;
+	unsigned long current_jiffies, timeout;
+	u32 gap;
+	u32 rc5 = 0;
+
+	/* get time */
+	current_jiffies = jiffies;
+	do_gettimeofday(&tv);
+
+	/* avoid overflow with gap >1s */
+	if (tv.tv_sec - ir->base_time.tv_sec > 1) {
+		gap = 200000;
+	} else {
+		gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
+		    tv.tv_usec - ir->base_time.tv_usec;
+	}
+
+	/* Allow some timmer jitter (RC5 is ~24ms anyway so this is ok) */
+	if (gap < 28000) {
+		dprintk(1, "ir-common: spurious timer_end\n");
+		return;
+	}
+
+	ir->active = 0;
+	if (ir->last_bit < 20) {
+		/* ignore spurious codes (caused by light/other remotes) */
+		dprintk(1, "ir-common: short code: %x\n", ir->code);
+	} else {
+		ir->code = (ir->code << ir->shift_by) | 1;
+		rc5 = ir_rc5_decode(ir->code);
+
+		/* two start bits? */
+		if (RC5_START(rc5) != ir->start) {
+			dprintk(1, "ir-common: rc5 start bits invalid: %u\n", RC5_START(rc5));
+
+			/* right address? */
+		} else if (RC5_ADDR(rc5) == ir->addr) {
+			u32 toggle = RC5_TOGGLE(rc5);
+			u32 instr = RC5_INSTR(rc5);
+
+			/* Good code, decide if repeat/repress */
+			if (toggle != RC5_TOGGLE(ir->last_rc5) ||
+			    instr != RC5_INSTR(ir->last_rc5)) {
+				dprintk(1, "ir-common: instruction %x, toggle %x\n", instr,
+					toggle);
+				ir_input_nokey(ir->dev, &ir->ir);
+				ir_input_keydown(ir->dev, &ir->ir, instr,
+						 instr);
+			}
+
+			/* Set/reset key-up timer */
+			timeout = current_jiffies + (500 + ir->rc5_key_timeout
+						     * HZ) / 1000;
+			mod_timer(&ir->timer_keyup, timeout);
+
+			/* Save code for repeat test */
+			ir->last_rc5 = rc5;
+		}
+	}
+}
+
+void ir_rc5_timer_keyup(unsigned long data)
+{
+	struct card_ir *ir = (struct card_ir *)data;
+
+	dprintk(1, "ir-common: key released\n");
+	ir_input_nokey(ir->dev, &ir->ir);
+}
+
 EXPORT_SYMBOL_GPL(ir_input_init);
 EXPORT_SYMBOL_GPL(ir_input_nokey);
 EXPORT_SYMBOL_GPL(ir_input_keydown);
@@ -265,6 +371,10 @@ EXPORT_SYMBOL_GPL(ir_dump_samples);
 EXPORT_SYMBOL_GPL(ir_decode_biphase);
 EXPORT_SYMBOL_GPL(ir_decode_pulsedistance);
 
+EXPORT_SYMBOL_GPL(ir_rc5_decode);
+EXPORT_SYMBOL_GPL(ir_rc5_timer_end);
+EXPORT_SYMBOL_GPL(ir_rc5_timer_keyup);
+
 /*
  * Local variables:
  * c-basic-offset: 8
diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c
index 0e948a5c5a03..4a54a559d81c 100644
--- a/drivers/media/common/ir-keymaps.c
+++ b/drivers/media/common/ir-keymaps.c
@@ -1606,3 +1606,57 @@ IR_KEYTAB_TYPE ir_codes_budget_ci_old[IR_KEYTAB_SIZE] = {
 };
 
 EXPORT_SYMBOL_GPL(ir_codes_budget_ci_old);
+
+/*
+ * Marc Fargas <telenieko@telenieko.com>
+ * this is the remote control that comes with the asus p7131
+ * which has a label saying is "Model PC-39"
+ */
+IR_KEYTAB_TYPE ir_codes_asus_pc39[IR_KEYTAB_SIZE] = {
+	/* Keys 0 to 9 */
+	[ 0x15 ] = KEY_0,
+	[ 0x29 ] = KEY_1,
+	[ 0x2d ] = KEY_2,
+	[ 0x2b ] = KEY_3,
+	[ 0x09 ] = KEY_4,
+	[ 0x0d ] = KEY_5,
+	[ 0x0b ] = KEY_6,
+	[ 0x31 ] = KEY_7,
+	[ 0x35 ] = KEY_8,
+	[ 0x33 ] = KEY_9,
+
+	[ 0x3e ] = KEY_RADIO,		/* radio */
+	[ 0x03 ] = KEY_MENU,		/* dvd/menu */
+	[ 0x2a ] = KEY_VOLUMEUP,
+	[ 0x19 ] = KEY_VOLUMEDOWN,
+	[ 0x37 ] = KEY_UP,
+	[ 0x3b ] = KEY_DOWN,
+	[ 0x27 ] = KEY_LEFT,
+	[ 0x2f ] = KEY_RIGHT,
+	[ 0x25 ] = KEY_VIDEO,		/* video */
+	[ 0x39 ] = KEY_AUDIO,		/* music */
+
+	[ 0x21 ] = KEY_TV,		/* tv */
+	[ 0x1d ] = KEY_EXIT,		/* back */
+	[ 0x0a ] = KEY_CHANNELUP,	/* channel / program + */
+	[ 0x1b ] = KEY_CHANNELDOWN,	/* channel / program - */
+	[ 0x1a ] = KEY_ENTER,		/* enter */
+
+	[ 0x06 ] = KEY_PAUSE,		/* play/pause */
+	[ 0x1e ] = KEY_PREVIOUS,	/* rew */
+	[ 0x26 ] = KEY_NEXT,		/* forward */
+	[ 0x0e ] = KEY_REWIND,		/* backward << */
+	[ 0x3a ] = KEY_FASTFORWARD,	/* forward >> */
+	[ 0x36 ] = KEY_STOP,
+	[ 0x2e ] = KEY_RECORD,		/* recording */
+	[ 0x16 ] = KEY_POWER,		/* the button that reads "close" */
+
+	[ 0x11 ] = KEY_ZOOM,		/* full screen */
+	[ 0x13 ] = KEY_MACRO,		/* recall */
+	[ 0x23 ] = KEY_HOME,		/* home */
+	[ 0x05 ] = KEY_PVR,		/* picture */
+	[ 0x3d ] = KEY_MUTE,		/* mute */
+	[ 0x01 ] = KEY_DVD,		/* dvd */
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_asus_pc39);
diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
index cbc012f71f52..14c07c606632 100644
--- a/drivers/media/video/bt8xx/bttv-input.c
+++ b/drivers/media/video/bt8xx/bttv-input.c
@@ -36,13 +36,18 @@ module_param(repeat_delay, int, 0644);
 static int repeat_period = 33;
 module_param(repeat_period, int, 0644);
 
+int ir_rc5_remote_gap = 885;
+module_param(ir_rc5_remote_gap, int, 0644);
+int ir_rc5_key_timeout = 200;
+module_param(ir_rc5_key_timeout, int, 0644);
+
 #define DEVNAME "bttv-input"
 
 /* ---------------------------------------------------------------------- */
 
 static void ir_handle_key(struct bttv *btv)
 {
-	struct bttv_ir *ir = btv->remote;
+	struct card_ir *ir = btv->remote;
 	u32 gpio,data;
 
 	/* read gpio value */
@@ -72,7 +77,7 @@ static void ir_handle_key(struct bttv *btv)
 
 void bttv_input_irq(struct bttv *btv)
 {
-	struct bttv_ir *ir = btv->remote;
+	struct card_ir *ir = btv->remote;
 
 	if (!ir->polling)
 		ir_handle_key(btv);
@@ -81,7 +86,7 @@ void bttv_input_irq(struct bttv *btv)
 static void bttv_input_timer(unsigned long data)
 {
 	struct bttv *btv = (struct bttv*)data;
-	struct bttv_ir *ir = btv->remote;
+	struct card_ir *ir = btv->remote;
 	unsigned long timeout;
 
 	ir_handle_key(btv);
@@ -91,51 +96,9 @@ static void bttv_input_timer(unsigned long data)
 
 /* ---------------------------------------------------------------*/
 
-static int rc5_remote_gap = 885;
-module_param(rc5_remote_gap, int, 0644);
-static int rc5_key_timeout = 200;
-module_param(rc5_key_timeout, int, 0644);
-
-#define RC5_START(x)	(((x)>>12)&3)
-#define RC5_TOGGLE(x)	(((x)>>11)&1)
-#define RC5_ADDR(x)	(((x)>>6)&31)
-#define RC5_INSTR(x)	((x)&63)
-
-/* decode raw bit pattern to RC5 code */
-static u32 rc5_decode(unsigned int code)
-{
-	unsigned int org_code = code;
-	unsigned int pair;
-	unsigned int rc5 = 0;
-	int i;
-
-	code = (code << 1) | 1;
-	for (i = 0; i < 14; ++i) {
-		pair = code & 0x3;
-		code >>= 2;
-
-		rc5 <<= 1;
-		switch (pair) {
-		case 0:
-		case 2:
-			break;
-		case 1:
-			rc5 |= 1;
-			break;
-		case 3:
-			dprintk(KERN_WARNING "bad code: %x\n", org_code);
-			return 0;
-		}
-	}
-	dprintk(KERN_WARNING "code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
-		"instr=%x\n", rc5, org_code, RC5_START(rc5),
-		RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
-	return rc5;
-}
-
 static int bttv_rc5_irq(struct bttv *btv)
 {
-	struct bttv_ir *ir = btv->remote;
+	struct card_ir *ir = btv->remote;
 	struct timeval tv;
 	u32 gpio;
 	u32 gap;
@@ -165,8 +128,8 @@ static int bttv_rc5_irq(struct bttv *btv)
 		/* only if in the code (otherwise spurious IRQ or timer
 		   late) */
 		if (ir->last_bit < 28) {
-			ir->last_bit = (gap - rc5_remote_gap / 2) /
-			    rc5_remote_gap;
+			ir->last_bit = (gap - ir_rc5_remote_gap / 2) /
+			    ir_rc5_remote_gap;
 			ir->code |= 1 << ir->last_bit;
 		}
 		/* starting new code */
@@ -186,80 +149,9 @@ static int bttv_rc5_irq(struct bttv *btv)
 	return 1;
 }
 
-
-static void bttv_rc5_timer_end(unsigned long data)
-{
-	struct bttv_ir *ir = (struct bttv_ir *)data;
-	struct timeval tv;
-	unsigned long current_jiffies, timeout;
-	u32 gap;
-
-	/* get time */
-	current_jiffies = jiffies;
-	do_gettimeofday(&tv);
-
-	/* avoid overflow with gap >1s */
-	if (tv.tv_sec - ir->base_time.tv_sec > 1) {
-		gap = 200000;
-	} else {
-		gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
-		    tv.tv_usec - ir->base_time.tv_usec;
-	}
-
-	/* Allow some timmer jitter (RC5 is ~24ms anyway so this is ok) */
-	if (gap < 28000) {
-		dprintk(KERN_WARNING "spurious timer_end\n");
-		return;
-	}
-
-	ir->active = 0;
-	if (ir->last_bit < 20) {
-		/* ignore spurious codes (caused by light/other remotes) */
-		dprintk(KERN_WARNING "short code: %x\n", ir->code);
-	} else {
-		u32 rc5 = rc5_decode(ir->code);
-
-		/* two start bits? */
-		if (RC5_START(rc5) != 3) {
-			dprintk(KERN_WARNING "rc5 start bits invalid: %u\n", RC5_START(rc5));
-
-			/* right address? */
-		} else if (RC5_ADDR(rc5) == 0x0) {
-			u32 toggle = RC5_TOGGLE(rc5);
-			u32 instr = RC5_INSTR(rc5);
-
-			/* Good code, decide if repeat/repress */
-			if (toggle != RC5_TOGGLE(ir->last_rc5) ||
-			    instr != RC5_INSTR(ir->last_rc5)) {
-				dprintk(KERN_WARNING "instruction %x, toggle %x\n", instr,
-					toggle);
-				ir_input_nokey(ir->dev, &ir->ir);
-				ir_input_keydown(ir->dev, &ir->ir, instr,
-						 instr);
-			}
-
-			/* Set/reset key-up timer */
-			timeout = current_jiffies + (500 + rc5_key_timeout
-						     * HZ) / 1000;
-			mod_timer(&ir->timer_keyup, timeout);
-
-			/* Save code for repeat test */
-			ir->last_rc5 = rc5;
-		}
-	}
-}
-
-static void bttv_rc5_timer_keyup(unsigned long data)
-{
-	struct bttv_ir *ir = (struct bttv_ir *)data;
-
-	dprintk(KERN_DEBUG "key released\n");
-	ir_input_nokey(ir->dev, &ir->ir);
-}
-
 /* ---------------------------------------------------------------------- */
 
-static void bttv_ir_start(struct bttv *btv, struct bttv_ir *ir)
+static void bttv_ir_start(struct bttv *btv, struct card_ir *ir)
 {
 	if (ir->polling) {
 		init_timer(&ir->timer);
@@ -270,12 +162,17 @@ static void bttv_ir_start(struct bttv *btv, struct bttv_ir *ir)
 	} else if (ir->rc5_gpio) {
 		/* set timer_end for code completion */
 		init_timer(&ir->timer_end);
-		ir->timer_end.function = bttv_rc5_timer_end;
+		ir->timer_end.function = ir_rc5_timer_end;
 		ir->timer_end.data = (unsigned long)ir;
 
 		init_timer(&ir->timer_keyup);
-		ir->timer_keyup.function = bttv_rc5_timer_keyup;
+		ir->timer_keyup.function = ir_rc5_timer_keyup;
 		ir->timer_keyup.data = (unsigned long)ir;
+		ir->shift_by = 1;
+		ir->start = 3;
+		ir->addr = 0x0;
+		ir->rc5_key_timeout = ir_rc5_key_timeout;
+		ir->rc5_remote_gap = ir_rc5_remote_gap;
 	}
 }
 
@@ -299,7 +196,7 @@ static void bttv_ir_stop(struct bttv *btv)
 
 int bttv_input_init(struct bttv *btv)
 {
-	struct bttv_ir *ir;
+	struct card_ir *ir;
 	IR_KEYTAB_TYPE *ir_codes = NULL;
 	struct input_dev *input_dev;
 	int ir_type = IR_TYPE_OTHER;
diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/video/bt8xx/bttv.h
index f9c9e3c4d111..5491acbdaf63 100644
--- a/drivers/media/video/bt8xx/bttv.h
+++ b/drivers/media/video/bt8xx/bttv.h
@@ -197,33 +197,6 @@ struct bttv_core {
 struct bttv;
 
 
-struct bttv_ir {
-	struct input_dev        *dev;
-	struct ir_input_state   ir;
-	char                    name[32];
-	char                    phys[32];
-
-	/* Usual gpio signalling */
-
-	u32                     mask_keycode;
-	u32                     mask_keydown;
-	u32                     mask_keyup;
-	u32                     polling;
-	u32                     last_gpio;
-	struct work_struct      work;
-	struct timer_list       timer;
-
-	/* RC5 gpio */
-	u32 rc5_gpio;
-	struct timer_list timer_end;	/* timer_end for code completion */
-	struct timer_list timer_keyup;	/* timer_end for key release */
-	u32 last_rc5;			/* last good rc5 code */
-	u32 last_bit;			/* last raw bit seen */
-	u32 code;			/* raw code under construction */
-	struct timeval base_time;	/* time of last seen code */
-	int active;			/* building raw code */
-};
-
 struct tvcard
 {
 	char *name;
diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
index 311c4c541e01..3802cafc9e41 100644
--- a/drivers/media/video/bt8xx/bttvp.h
+++ b/drivers/media/video/bt8xx/bttvp.h
@@ -308,7 +308,7 @@ struct bttv {
 
 	/* infrared remote */
 	int has_remote;
-	struct bttv_ir *remote;
+	struct card_ir *remote;
 
 	/* locking */
 	spinlock_t s_lock;
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index ae984bbe36b6..dc45b2374f58 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -3926,6 +3926,7 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 	case SAA7134_BOARD_KWORLD_TERMINATOR:
 	case SAA7134_BOARD_SEDNA_PC_TV_CARDBUS:
 	case SAA7134_BOARD_FLYDVBT_LR301:
+	case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
 	case SAA7134_BOARD_FLYDVBTDUO:
 	case SAA7134_BOARD_PROTEUS_2309:
 	case SAA7134_BOARD_AVERMEDIA_A16AR:
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index e4252683a597..08848ebc682f 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -40,16 +40,24 @@ static int pinnacle_remote = 0;
 module_param(pinnacle_remote, int, 0644);    /* Choose Pinnacle PCTV remote */
 MODULE_PARM_DESC(pinnacle_remote, "Specify Pinnacle PCTV remote: 0=coloured, 1=grey (defaults to 0)");
 
+int ir_rc5_remote_gap = 885;
+module_param(ir_rc5_remote_gap, int, 0644);
+int ir_rc5_key_timeout = 115;
+module_param(ir_rc5_key_timeout, int, 0644);
+
 #define dprintk(fmt, arg...)	if (ir_debug) \
 	printk(KERN_DEBUG "%s/ir: " fmt, dev->name , ## arg)
 #define i2cdprintk(fmt, arg...)    if (ir_debug) \
 	printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg)
 
+/** rc5 functions */
+static int saa7134_rc5_irq(struct saa7134_dev *dev);
+
 /* -------------------- GPIO generic keycode builder -------------------- */
 
 static int build_key(struct saa7134_dev *dev)
 {
-	struct saa7134_ir *ir = dev->remote;
+	struct card_ir *ir = dev->remote;
 	u32 gpio, data;
 
 	/* rising SAA7134_GPIO_GPRESCAN reads the status */
@@ -134,16 +142,19 @@ static int get_key_hvr1110(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 
 void saa7134_input_irq(struct saa7134_dev *dev)
 {
-	struct saa7134_ir *ir = dev->remote;
+	struct card_ir *ir = dev->remote;
 
-	if (!ir->polling)
+	if (!ir->polling && !ir->rc5_gpio) {
 		build_key(dev);
+	} else if (ir->rc5_gpio) {
+		saa7134_rc5_irq(dev);
+	}
 }
 
 static void saa7134_input_timer(unsigned long data)
 {
 	struct saa7134_dev *dev = (struct saa7134_dev*)data;
-	struct saa7134_ir *ir = dev->remote;
+	struct card_ir *ir = dev->remote;
 	unsigned long timeout;
 
 	build_key(dev);
@@ -151,7 +162,7 @@ static void saa7134_input_timer(unsigned long data)
 	mod_timer(&ir->timer, timeout);
 }
 
-static void saa7134_ir_start(struct saa7134_dev *dev, struct saa7134_ir *ir)
+static void saa7134_ir_start(struct saa7134_dev *dev, struct card_ir *ir)
 {
 	if (ir->polling) {
 		init_timer(&ir->timer);
@@ -159,6 +170,19 @@ static void saa7134_ir_start(struct saa7134_dev *dev, struct saa7134_ir *ir)
 		ir->timer.data     = (unsigned long)dev;
 		ir->timer.expires  = jiffies + HZ;
 		add_timer(&ir->timer);
+	} else if (ir->rc5_gpio) {
+		/* set timer_end for code completion */
+		init_timer(&ir->timer_end);
+		ir->timer_end.function = ir_rc5_timer_end;
+		ir->timer_end.data = (unsigned long)ir;
+		init_timer(&ir->timer_keyup);
+		ir->timer_keyup.function = ir_rc5_timer_keyup;
+		ir->timer_keyup.data = (unsigned long)ir;
+		ir->shift_by = 2;
+		ir->start = 0x2;
+		ir->addr = 0x17;
+		ir->rc5_key_timeout = ir_rc5_key_timeout;
+		ir->rc5_remote_gap = ir_rc5_remote_gap;
 	}
 }
 
@@ -170,13 +194,14 @@ static void saa7134_ir_stop(struct saa7134_dev *dev)
 
 int saa7134_input_init1(struct saa7134_dev *dev)
 {
-	struct saa7134_ir *ir;
+	struct card_ir *ir;
 	struct input_dev *input_dev;
 	IR_KEYTAB_TYPE *ir_codes = NULL;
 	u32 mask_keycode = 0;
 	u32 mask_keydown = 0;
 	u32 mask_keyup   = 0;
 	int polling      = 0;
+	int rc5_gpio	 = 0;
 	int ir_type      = IR_TYPE_OTHER;
 	int err;
 
@@ -295,6 +320,11 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 		mask_keycode = 0x0001F00;
 		mask_keydown = 0x0040000;
 		break;
+	case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
+		ir_codes     = ir_codes_asus_pc39;
+		mask_keydown = 0x0040000;
+		rc5_gpio = 1;
+		break;
 	}
 	if (NULL == ir_codes) {
 		printk("%s: Oops: IR config error [card=%d]\n",
@@ -316,6 +346,7 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 	ir->mask_keydown = mask_keydown;
 	ir->mask_keyup   = mask_keyup;
 	ir->polling      = polling;
+	ir->rc5_gpio	 = rc5_gpio;
 
 	/* init input device */
 	snprintf(ir->name, sizeof(ir->name), "saa7134 IR (%s)",
@@ -402,6 +433,49 @@ void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir)
 	}
 
 }
+
+static int saa7134_rc5_irq(struct saa7134_dev *dev)
+{
+	struct card_ir *ir = dev->remote;
+	struct timeval tv;
+	u32 gap;
+	unsigned long current_jiffies, timeout;
+
+	/* get time of bit */
+	current_jiffies = jiffies;
+	do_gettimeofday(&tv);
+
+	/* avoid overflow with gap >1s */
+	if (tv.tv_sec - ir->base_time.tv_sec > 1) {
+		gap = 200000;
+	} else {
+		gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
+		    tv.tv_usec - ir->base_time.tv_usec;
+	}
+
+	/* active code => add bit */
+	if (ir->active) {
+		/* only if in the code (otherwise spurious IRQ or timer
+		   late) */
+		if (ir->last_bit < 28) {
+			ir->last_bit = (gap - ir_rc5_remote_gap / 2) /
+			    ir_rc5_remote_gap;
+			ir->code |= 1 << ir->last_bit;
+		}
+		/* starting new code */
+	} else {
+		ir->active = 1;
+		ir->code = 0;
+		ir->base_time = tv;
+		ir->last_bit = 0;
+
+		timeout = current_jiffies + (500 + 30 * HZ) / 1000;
+		mod_timer(&ir->timer_end, timeout);
+	}
+
+	return 1;
+}
+
 /* ----------------------------------------------------------------------
  * Local variables:
  * c-basic-offset: 8
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 88cd1297df13..73b16b2044f6 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -411,20 +411,6 @@ struct saa7134_dmasound {
 	struct snd_pcm_substream   *substream;
 };
 
-/* IR input */
-struct saa7134_ir {
-	struct input_dev           *dev;
-	struct ir_input_state      ir;
-	char                       name[32];
-	char                       phys[32];
-	u32                        mask_keycode;
-	u32                        mask_keydown;
-	u32                        mask_keyup;
-	int                        polling;
-	u32                        last_gpio;
-	struct timer_list          timer;
-};
-
 /* ts/mpeg status */
 struct saa7134_ts {
 	/* TS capture */
@@ -463,7 +449,7 @@ struct saa7134_dev {
 
 	/* infrared remote */
 	int                        has_remote;
-	struct saa7134_ir          *remote;
+	struct card_ir		   *remote;
 
 	/* pci i/o */
 	char                       name[32];
@@ -698,6 +684,7 @@ void saa7134_input_fini(struct saa7134_dev *dev);
 void saa7134_input_irq(struct saa7134_dev *dev);
 void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir);
 
+
 /*
  * Local variables:
  * c-basic-offset: 8
diff --git a/include/media/ir-common.h b/include/media/ir-common.h
index 4bb0ad810179..c60a30997973 100644
--- a/include/media/ir-common.h
+++ b/include/media/ir-common.h
@@ -36,6 +36,14 @@
 #define IR_KEYCODE(tab,code)	(((unsigned)code < IR_KEYTAB_SIZE) \
 				 ? tab[code] : KEY_RESERVED)
 
+extern int ir_rc5_remote_gap;
+extern int ir_rc5_key_timeout;
+
+#define RC5_START(x)	(((x)>>12)&3)
+#define RC5_TOGGLE(x)	(((x)>>11)&1)
+#define RC5_ADDR(x)	(((x)>>6)&31)
+#define RC5_INSTR(x)	((x)&63)
+
 struct ir_input_state {
 	/* configuration */
 	int                ir_type;
@@ -48,6 +56,40 @@ struct ir_input_state {
 	int                keypressed;  /* current state */
 };
 
+/* this was saa7134_ir and bttv_ir, moved here for
+ * rc5 decoding. */
+struct card_ir {
+	struct input_dev        *dev;
+	struct ir_input_state   ir;
+	char                    name[32];
+	char                    phys[32];
+
+	/* Usual gpio signalling */
+
+	u32                     mask_keycode;
+	u32                     mask_keydown;
+	u32                     mask_keyup;
+	u32                     polling;
+	u32                     last_gpio;
+	int			shift_by;
+	int			start; // What should RC5_START() be
+	int			addr; // What RC5_ADDR() should be.
+	int			rc5_key_timeout;
+	int			rc5_remote_gap;
+	struct work_struct      work;
+	struct timer_list       timer;
+
+	/* RC5 gpio */
+	u32 rc5_gpio;
+	struct timer_list timer_end;	/* timer_end for code completion */
+	struct timer_list timer_keyup;	/* timer_end for key release */
+	u32 last_rc5;			/* last good rc5 code */
+	u32 last_bit;			/* last raw bit seen */
+	u32 code;			/* raw code under construction */
+	struct timeval base_time;	/* time of last seen code */
+	int active;			/* building raw code */
+};
+
 void ir_input_init(struct input_dev *dev, struct ir_input_state *ir,
 		   int ir_type, IR_KEYTAB_TYPE *ir_codes);
 void ir_input_nokey(struct input_dev *dev, struct ir_input_state *ir);
@@ -58,6 +100,10 @@ int  ir_dump_samples(u32 *samples, int count);
 int  ir_decode_biphase(u32 *samples, int count, int low, int high);
 int  ir_decode_pulsedistance(u32 *samples, int count, int low, int high);
 
+u32 ir_rc5_decode(unsigned int code);
+void ir_rc5_timer_end(unsigned long data);
+void ir_rc5_timer_keyup(unsigned long data);
+
 /* Keymaps to be used by other modules */
 
 extern IR_KEYTAB_TYPE ir_codes_empty[IR_KEYTAB_SIZE];
@@ -94,6 +140,7 @@ extern IR_KEYTAB_TYPE ir_codes_npgtech[IR_KEYTAB_SIZE];
 extern IR_KEYTAB_TYPE ir_codes_norwood[IR_KEYTAB_SIZE];
 extern IR_KEYTAB_TYPE ir_codes_proteus_2309[IR_KEYTAB_SIZE];
 extern IR_KEYTAB_TYPE ir_codes_budget_ci_old[IR_KEYTAB_SIZE];
+extern IR_KEYTAB_TYPE ir_codes_asus_pc39[IR_KEYTAB_SIZE];
 
 #endif