scsi: remove the sym53c416 driver

This driver hasn't seen any recent bug fixing and is one of the last
drivers using the scsi_module.c infrastruture that has been deprecated
15 years ago.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

5 files changed, 0 insertions, 899 deletions

diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt
index 8f7be8a05642..2dc7f11179d1 100644
--- a/Documentation/scsi/scsi-parameters.txt
+++ b/Documentation/scsi/scsi-parameters.txt
@@ -108,9 +108,6 @@ parameters may be changed at runtime by the command
 	st=		[HW,SCSI] SCSI tape parameters (buffers, etc.)
 			See Documentation/scsi/st.txt.
 
-	sym53c416=	[HW,SCSI]
-			See header of drivers/scsi/sym53c416.c.
-
 	tmscsim=	[HW,SCSI]
 			See comment before function dc390_setup() in
 			drivers/scsi/tmscsim.c.
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 9fa0cfd5a068..11e89e56b865 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1172,24 +1172,6 @@ config SCSI_SIM710
 
 	  It currently supports Compaq EISA cards and NCR MCA cards
 
-config SCSI_SYM53C416
-	tristate "Symbios 53c416 SCSI support"
-	depends on ISA && SCSI
-	---help---
-	  This is support for the sym53c416 SCSI host adapter, the SCSI
-	  adapter that comes with some HP scanners. This driver requires that
-	  the sym53c416 is configured first using some sort of PnP
-	  configuration program (e.g. isapnp) or by a PnP aware BIOS. If you
-	  are using isapnp then you need to compile this driver as a module
-	  and then load it using insmod after isapnp has run. The parameters
-	  of the configured card(s) should be passed to the driver. The format
-	  is:
-
-	  insmod sym53c416 sym53c416=<base>,<irq> [sym53c416_1=<base>,<irq>]
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called sym53c416.
-
 config SCSI_DC395x
 	tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support"
 	depends on PCI && SCSI
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 192a58d7d9d9..d5135efbf9cd 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -77,7 +77,6 @@ obj-$(CONFIG_SCSI_IPS)		+= ips.o
 obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o
 obj-$(CONFIG_SCSI_NCR_D700)	+= 53c700.o NCR_D700.o
 obj-$(CONFIG_SCSI_NCR_Q720)	+= NCR_Q720_mod.o
-obj-$(CONFIG_SCSI_SYM53C416)	+= sym53c416.o
 obj-$(CONFIG_SCSI_QLOGIC_FAS)	+= qlogicfas408.o	qlogicfas.o
 obj-$(CONFIG_PCMCIA_QLOGIC)	+= qlogicfas408.o
 obj-$(CONFIG_SCSI_QLOGIC_1280)	+= qla1280.o 
diff --git a/drivers/scsi/sym53c416.c b/drivers/scsi/sym53c416.c
deleted file mode 100644
index e68bcdc75bc3..000000000000
--- a/drivers/scsi/sym53c416.c
+++ /dev/null
@@ -1,844 +0,0 @@
-/*
- *  sym53c416.c
- *  Low-level SCSI driver for sym53c416 chip.
- *  Copyright (C) 1998 Lieven Willems (lw_linux@hotmail.com)
- * 
- *  Changes : 
- * 
- *  Marcelo Tosatti <marcelo@conectiva.com.br> : Added io_request_lock locking
- *  Alan Cox <alan@lxorguk.ukuu.org.uk> : Cleaned up code formatting
- *				 Fixed an irq locking bug
- *				 Added ISAPnP support
- *  Bjoern A. Zeeb <bzeeb@zabbadoz.net> : Initial irq locking updates
- *					  Added another card with ISAPnP support
- * 
- *  LILO command line usage: sym53c416=<PORTBASE>[,<IRQ>]
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2, or (at your option) any
- *  later version.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/proc_fs.h>
-#include <linux/spinlock.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <linux/blkdev.h>
-#include <linux/isapnp.h>
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "sym53c416.h"
-
-#define VERSION_STRING        "Version 1.0.0-ac"
-
-#define TC_LOW       0x00     /* Transfer counter low        */
-#define TC_MID       0x01     /* Transfer counter mid        */
-#define SCSI_FIFO    0x02     /* SCSI FIFO register          */
-#define COMMAND_REG  0x03     /* Command Register            */
-#define STATUS_REG   0x04     /* Status Register (READ)      */
-#define DEST_BUS_ID  0x04     /* Destination Bus ID (WRITE)  */
-#define INT_REG      0x05     /* Interrupt Register (READ)   */
-#define TOM          0x05     /* Time out multiplier (WRITE) */
-#define STP          0x06     /* Synchronous Transfer period */
-#define SYNC_OFFSET  0x07     /* Synchronous Offset          */
-#define CONF_REG_1   0x08     /* Configuration register 1    */
-#define CONF_REG_2   0x0B     /* Configuration register 2    */
-#define CONF_REG_3   0x0C     /* Configuration register 3    */
-#define CONF_REG_4   0x0D     /* Configuration register 4    */
-#define TC_HIGH      0x0E     /* Transfer counter high       */
-#define PIO_FIFO_1   0x10     /* PIO FIFO register 1         */
-#define PIO_FIFO_2   0x11     /* PIO FIFO register 2         */
-#define PIO_FIFO_3   0x12     /* PIO FIFO register 3         */
-#define PIO_FIFO_4   0x13     /* PIO FIFO register 4         */
-#define PIO_FIFO_CNT 0x14     /* PIO FIFO count              */
-#define PIO_INT_REG  0x15     /* PIO interrupt register      */
-#define CONF_REG_5   0x16     /* Configuration register 5    */
-#define FEATURE_EN   0x1D     /* Feature Enable register     */
-
-/* Configuration register 1 entries: */
-/* Bits 2-0: SCSI ID of host adapter */
-#define SCM    0x80                     /* Slow Cable Mode              */
-#define SRID   0x40                     /* SCSI Reset Interrupt Disable */
-#define PTM    0x20                     /* Parity Test Mode             */
-#define EPC    0x10                     /* Enable Parity Checking       */
-#define CTME   0x08                     /* Special Test Mode            */
-
-/* Configuration register 2 entries: */
-#define FE     0x40                     /* Features Enable              */
-#define SCSI2  0x08                     /* SCSI 2 Enable                */
-#define TBPA   0x04                     /* Target Bad Parity Abort      */
-
-/* Configuration register 3 entries: */
-#define IDMRC  0x80                     /* ID Message Reserved Check    */
-#define QTE    0x40                     /* Queue Tag Enable             */
-#define CDB10  0x20                     /* Command Descriptor Block 10  */
-#define FSCSI  0x10                     /* FastSCSI                     */
-#define FCLK   0x08                     /* FastClock                    */
-
-/* Configuration register 4 entries: */
-#define RBS    0x08                     /* Register bank select         */
-#define EAN    0x04                     /* Enable Active Negotiation    */
-
-/* Configuration register 5 entries: */
-#define LPSR   0x80                     /* Lower Power SCSI Reset       */
-#define IE     0x20                     /* Interrupt Enable             */
-#define LPM    0x02                     /* Low Power Mode               */
-#define WSE0   0x01                     /* 0WS Enable                   */
-
-/* Interrupt register entries: */
-#define SRST   0x80                     /* SCSI Reset                   */
-#define ILCMD  0x40                     /* Illegal Command              */
-#define DIS    0x20                     /* Disconnect                   */
-#define BS     0x10                     /* Bus Service                  */
-#define FC     0x08                     /* Function Complete            */
-#define RESEL  0x04                     /* Reselected                   */
-#define SI     0x03                     /* Selection Interrupt          */
-
-/* Status Register Entries: */
-#define SCI    0x80                     /* SCSI Core Int                */
-#define GE     0x40                     /* Gross Error                  */
-#define PE     0x20                     /* Parity Error                 */
-#define TC     0x10                     /* Terminal Count               */
-#define VGC    0x08                     /* Valid Group Code             */
-#define PHBITS 0x07                     /* Phase bits                   */
-
-/* PIO Interrupt Register Entries: */
-#define SCI    0x80                     /* SCSI Core Int                */
-#define PFI    0x40                     /* PIO FIFO Interrupt           */
-#define FULL   0x20                     /* PIO FIFO Full                */
-#define EMPTY  0x10                     /* PIO FIFO Empty               */
-#define CE     0x08                     /* Collision Error              */
-#define OUE    0x04                     /* Overflow / Underflow error   */
-#define FIE    0x02                     /* Full Interrupt Enable        */
-#define EIE    0x01                     /* Empty Interrupt Enable       */
-
-/* SYM53C416 SCSI phases (lower 3 bits of SYM53C416_STATUS_REG) */
-#define PHASE_DATA_OUT    0x00
-#define PHASE_DATA_IN     0x01
-#define PHASE_COMMAND     0x02
-#define PHASE_STATUS      0x03
-#define PHASE_RESERVED_1  0x04
-#define PHASE_RESERVED_2  0x05
-#define PHASE_MESSAGE_OUT 0x06
-#define PHASE_MESSAGE_IN  0x07
-
-/* SYM53C416 core commands */
-#define NOOP                      0x00
-#define FLUSH_FIFO                0x01
-#define RESET_CHIP                0x02
-#define RESET_SCSI_BUS            0x03
-#define DISABLE_SEL_RESEL         0x45
-#define RESEL_SEQ                 0x40
-#define SEL_WITHOUT_ATN_SEQ       0x41
-#define SEL_WITH_ATN_SEQ          0x42
-#define SEL_WITH_ATN_AND_STOP_SEQ 0x43
-#define ENABLE_SEL_RESEL          0x44
-#define SEL_WITH_ATN3_SEQ         0x46
-#define RESEL3_SEQ                0x47
-#define SND_MSG                   0x20
-#define SND_STAT                  0x21
-#define SND_DATA                  0x22
-#define DISCONNECT_SEQ            0x23
-#define TERMINATE_SEQ             0x24
-#define TARGET_COMM_COMPLETE_SEQ  0x25
-#define DISCONN                   0x27
-#define RECV_MSG_SEQ              0x28
-#define RECV_CMD                  0x29
-#define RECV_DATA                 0x2A
-#define RECV_CMD_SEQ              0x2B
-#define TARGET_ABORT_PIO          0x04
-#define TRANSFER_INFORMATION      0x10
-#define INIT_COMM_COMPLETE_SEQ    0x11
-#define MSG_ACCEPTED              0x12
-#define TRANSFER_PAD              0x18
-#define SET_ATN                   0x1A
-#define RESET_ATN                 0x1B
-#define ILLEGAL                   0xFF
-
-#define PIO_MODE                  0x80
-
-#define IO_RANGE 0x20         /* 0x00 - 0x1F                   */
-#define ID       "sym53c416"	/* Attention: copied to the sym53c416.h */
-#define PIO_SIZE 128          /* Size of PIO fifo is 128 bytes */
-
-#define READ_TIMEOUT              150
-#define WRITE_TIMEOUT             150
-
-#ifdef MODULE
-
-#define sym53c416_base sym53c416
-#define sym53c416_base_1 sym53c416_1
-#define sym53c416_base_2 sym53c416_2
-#define sym53c416_base_3 sym53c416_3
-
-static unsigned int sym53c416_base[2];
-static unsigned int sym53c416_base_1[2];
-static unsigned int sym53c416_base_2[2];
-static unsigned int sym53c416_base_3[2];
-
-#endif
-
-#define MAXHOSTS 4
-
-#define SG_ADDRESS(buffer)     ((char *) sg_virt((buffer)))
-
-enum phases
-{
-	idle,
-	data_out,
-	data_in,
-	command_ph,
-	status_ph,
-	message_out,
-	message_in
-};
-
-typedef struct
-{
-	int base;
-	int irq;
-	int scsi_id;
-} host;
-
-static host hosts[MAXHOSTS] = {
-                       {0, 0, SYM53C416_SCSI_ID},
-                       {0, 0, SYM53C416_SCSI_ID},
-                       {0, 0, SYM53C416_SCSI_ID},
-                       {0, 0, SYM53C416_SCSI_ID}
-                       };
-
-static int host_index = 0;
-static char info[120];
-static Scsi_Cmnd *current_command = NULL;
-static int fastpio = 1;
-
-static int probeaddrs[] = {0x200, 0x220, 0x240, 0};
-
-static void sym53c416_set_transfer_counter(int base, unsigned int len)
-{
-	/* Program Transfer Counter */
-	outb(len & 0x0000FF, base + TC_LOW);
-	outb((len & 0x00FF00) >> 8, base + TC_MID);
-	outb((len & 0xFF0000) >> 16, base + TC_HIGH);
-}
-
-static DEFINE_SPINLOCK(sym53c416_lock);
-
-/* Returns the number of bytes read */
-static __inline__ unsigned int sym53c416_read(int base, unsigned char *buffer, unsigned int len)
-{
-	unsigned int orig_len = len;
-	unsigned long flags = 0;
-	unsigned int bytes_left;
-	unsigned long i;
-	int timeout = READ_TIMEOUT;
-
-	/* Do transfer */
-	spin_lock_irqsave(&sym53c416_lock, flags);
-	while(len && timeout)
-	{
-		bytes_left = inb(base + PIO_FIFO_CNT); /* Number of bytes in the PIO FIFO */
-		if(fastpio && bytes_left > 3)
-		{
-			insl(base + PIO_FIFO_1, buffer, bytes_left >> 2);
-			buffer += bytes_left & 0xFC;
-			len -= bytes_left & 0xFC;
-		}
-		else if(bytes_left > 0)
-		{
-			len -= bytes_left;
-			for(; bytes_left > 0; bytes_left--)
-				*(buffer++) = inb(base + PIO_FIFO_1);
-		}
-		else
-		{
-			i = jiffies + timeout;
-			spin_unlock_irqrestore(&sym53c416_lock, flags);
-			while(time_before(jiffies, i) && (inb(base + PIO_INT_REG) & EMPTY) && timeout)
-				if(inb(base + PIO_INT_REG) & SCI)
-					timeout = 0;
-			spin_lock_irqsave(&sym53c416_lock, flags);
-			if(inb(base + PIO_INT_REG) & EMPTY)
-				timeout = 0;
-		}
-	}
-	spin_unlock_irqrestore(&sym53c416_lock, flags);
-	return orig_len - len;
-}
-
-/* Returns the number of bytes written */
-static __inline__ unsigned int sym53c416_write(int base, unsigned char *buffer, unsigned int len)
-{
-	unsigned int orig_len = len;
-	unsigned long flags = 0;
-	unsigned int bufferfree;
-	unsigned long i;
-	unsigned int timeout = WRITE_TIMEOUT;
-
-	/* Do transfer */
-	spin_lock_irqsave(&sym53c416_lock, flags);
-	while(len && timeout)
-	{
-		bufferfree = PIO_SIZE - inb(base + PIO_FIFO_CNT);
-		if(bufferfree > len)
-			bufferfree = len;
-		if(fastpio && bufferfree > 3)
-		{
-			outsl(base + PIO_FIFO_1, buffer, bufferfree >> 2);
-			buffer += bufferfree & 0xFC;
-			len -= bufferfree & 0xFC;
-		}
-		else if(bufferfree > 0)
-		{
-			len -= bufferfree;
-			for(; bufferfree > 0; bufferfree--)
-				outb(*(buffer++), base + PIO_FIFO_1);
-		}
-		else
-		{
-			i = jiffies + timeout;
-			spin_unlock_irqrestore(&sym53c416_lock, flags);
-			while(time_before(jiffies, i) && (inb(base + PIO_INT_REG) & FULL) && timeout)
-				;
-			spin_lock_irqsave(&sym53c416_lock, flags);
-			if(inb(base + PIO_INT_REG) & FULL)
-				timeout = 0;
-		}
-	}
-	spin_unlock_irqrestore(&sym53c416_lock, flags);
-	return orig_len - len;
-}
-
-static irqreturn_t sym53c416_intr_handle(int irq, void *dev_id)
-{
-	struct Scsi_Host *dev = dev_id;
-	int base = dev->io_port;
-	int i;
-	unsigned long flags = 0;
-	unsigned char status_reg, pio_int_reg, int_reg;
-	struct scatterlist *sg;
-	unsigned int tot_trans = 0;
-
-	spin_lock_irqsave(dev->host_lock,flags);
-	status_reg = inb(base + STATUS_REG);
-	pio_int_reg = inb(base + PIO_INT_REG);
-	int_reg = inb(base + INT_REG);
-	spin_unlock_irqrestore(dev->host_lock, flags);
-
-	/* First, we handle error conditions */
-	if(int_reg & SCI)         /* SCSI Reset */
-	{
-		printk(KERN_DEBUG "sym53c416: Reset received\n");
-		current_command->SCp.phase = idle;
-		current_command->result = DID_RESET << 16;
-		spin_lock_irqsave(dev->host_lock, flags);
-		current_command->scsi_done(current_command);
-		spin_unlock_irqrestore(dev->host_lock, flags);
-		goto out;
-	}
-	if(int_reg & ILCMD)       /* Illegal Command */
-	{
-		printk(KERN_WARNING "sym53c416: Illegal Command: 0x%02x.\n", inb(base + COMMAND_REG));
-		current_command->SCp.phase = idle;
-		current_command->result = DID_ERROR << 16;
-		spin_lock_irqsave(dev->host_lock, flags);
-		current_command->scsi_done(current_command);
-		spin_unlock_irqrestore(dev->host_lock, flags);
-		goto out;
-	}
-	if(status_reg & GE)         /* Gross Error */
-	{
-		printk(KERN_WARNING "sym53c416: Controller reports gross error.\n");
-		current_command->SCp.phase = idle;
-		current_command->result = DID_ERROR << 16;
-		spin_lock_irqsave(dev->host_lock, flags);
-		current_command->scsi_done(current_command);
-		spin_unlock_irqrestore(dev->host_lock, flags);
-		goto out;
-	}
-	if(status_reg & PE)         /* Parity Error */
-	{
-		printk(KERN_WARNING "sym53c416:SCSI parity error.\n");
-		current_command->SCp.phase = idle;
-		current_command->result = DID_PARITY << 16;
-		spin_lock_irqsave(dev->host_lock, flags);
-		current_command->scsi_done(current_command);
-		spin_unlock_irqrestore(dev->host_lock, flags);
-		goto out;
-	}
-	if(pio_int_reg & (CE | OUE))
-	{
-		printk(KERN_WARNING "sym53c416: PIO interrupt error.\n");
-		current_command->SCp.phase = idle;
-		current_command->result = DID_ERROR << 16;
-		spin_lock_irqsave(dev->host_lock, flags);
-		current_command->scsi_done(current_command);
-		spin_unlock_irqrestore(dev->host_lock, flags);
-		goto out;
-	}
-	if(int_reg & DIS)           /* Disconnect */
-	{
-		if(current_command->SCp.phase != message_in)
-			current_command->result = DID_NO_CONNECT << 16;
-		else
-			current_command->result = (current_command->SCp.Status & 0xFF) | ((current_command->SCp.Message & 0xFF) << 8) | (DID_OK << 16);
-		current_command->SCp.phase = idle;
-		spin_lock_irqsave(dev->host_lock, flags);
-		current_command->scsi_done(current_command);
-		spin_unlock_irqrestore(dev->host_lock, flags);
-		goto out;
-	}
-	/* Now we handle SCSI phases         */
-
-	switch(status_reg & PHBITS)       /* Filter SCSI phase out of status reg */
-	{
-		case PHASE_DATA_OUT:
-		{
-			if(int_reg & BS)
-			{
-				current_command->SCp.phase = data_out;
-				outb(FLUSH_FIFO, base + COMMAND_REG);
-				sym53c416_set_transfer_counter(base,
-							       scsi_bufflen(current_command));
-				outb(TRANSFER_INFORMATION | PIO_MODE, base + COMMAND_REG);
-
-				scsi_for_each_sg(current_command,
-						 sg, scsi_sg_count(current_command), i) {
-					tot_trans += sym53c416_write(base,
-								     SG_ADDRESS(sg),
-								     sg->length);
-				}
-				if(tot_trans < current_command->underflow)
-					printk(KERN_WARNING "sym53c416: Underflow, wrote %d bytes, request for %d bytes.\n", tot_trans, current_command->underflow);
-			}
-			break;
-		}
-
-		case PHASE_DATA_IN:
-		{
-			if(int_reg & BS)
-			{
-				current_command->SCp.phase = data_in;
-				outb(FLUSH_FIFO, base + COMMAND_REG);
-				sym53c416_set_transfer_counter(base,
-							       scsi_bufflen(current_command));
-
-				outb(TRANSFER_INFORMATION | PIO_MODE, base + COMMAND_REG);
-
-				scsi_for_each_sg(current_command,
-						 sg, scsi_sg_count(current_command), i) {
-					tot_trans += sym53c416_read(base,
-								    SG_ADDRESS(sg),
-								    sg->length);
-				}
-				if(tot_trans < current_command->underflow)
-					printk(KERN_WARNING "sym53c416: Underflow, read %d bytes, request for %d bytes.\n", tot_trans, current_command->underflow);
-			}
-			break;
-		}
-
-		case PHASE_COMMAND:
-		{
-			current_command->SCp.phase = command_ph;
-			printk(KERN_ERR "sym53c416: Unknown interrupt in command phase.\n");
-			break;
-		}
-
-		case PHASE_STATUS:
-		{
-			current_command->SCp.phase = status_ph;
-			outb(FLUSH_FIFO, base + COMMAND_REG);
-			outb(INIT_COMM_COMPLETE_SEQ, base + COMMAND_REG);
-			break;
-		}
-		
-		case PHASE_RESERVED_1:
-		case PHASE_RESERVED_2:
-		{
-			printk(KERN_ERR "sym53c416: Reserved phase occurred.\n");
-			break;
-		}
-
-		case PHASE_MESSAGE_OUT:
-		{
-			current_command->SCp.phase = message_out;
-			outb(SET_ATN, base + COMMAND_REG);
-			outb(MSG_ACCEPTED, base + COMMAND_REG);
-			break;
-		}
-
-		case PHASE_MESSAGE_IN:
-		{
-			current_command->SCp.phase = message_in;
-			current_command->SCp.Status = inb(base + SCSI_FIFO);
-			current_command->SCp.Message = inb(base + SCSI_FIFO);
-			if(current_command->SCp.Message == SAVE_POINTERS || current_command->SCp.Message == DISCONNECT)
-				outb(SET_ATN, base + COMMAND_REG);
-			outb(MSG_ACCEPTED, base + COMMAND_REG);
-			break;
-		}
-	}
-out:
-	return IRQ_HANDLED;
-}
-
-static void sym53c416_init(int base, int scsi_id)
-{
-	outb(RESET_CHIP, base + COMMAND_REG);
-	outb(NOOP, base + COMMAND_REG);
-	outb(0x99, base + TOM); /* Time out of 250 ms */
-	outb(0x05, base + STP);
-	outb(0x00, base + SYNC_OFFSET);
-	outb(EPC | scsi_id, base + CONF_REG_1);
-	outb(FE | SCSI2 | TBPA, base + CONF_REG_2);
-	outb(IDMRC | QTE | CDB10 | FSCSI | FCLK, base + CONF_REG_3);
-	outb(0x83 | EAN, base + CONF_REG_4);
-	outb(IE | WSE0, base + CONF_REG_5);
-	outb(0, base + FEATURE_EN);
-}
-
-static int sym53c416_probeirq(int base, int scsi_id)
-{
-	int irq, irqs;
-	unsigned long i;
-
-	/* Clear interrupt register */
-	inb(base + INT_REG);
-	/* Start probing for irq's */
-	irqs = probe_irq_on();
-	/* Reinit chip */
-	sym53c416_init(base, scsi_id);
-	/* Cause interrupt */
-	outb(NOOP, base + COMMAND_REG);
-	outb(ILLEGAL, base + COMMAND_REG);
-	outb(0x07, base + DEST_BUS_ID);
-	outb(0x00, base + DEST_BUS_ID);
-	/* Wait for interrupt to occur */
-	i = jiffies + 20;
-	while(time_before(jiffies, i) && !(inb(base + STATUS_REG) & SCI))
-		barrier();
-	if(time_before_eq(i, jiffies))	/* timed out */
-		return 0;
-	/* Get occurred irq */
-	irq = probe_irq_off(irqs);
-	sym53c416_init(base, scsi_id);
-	return irq;
-}
-
-/* Setup: sym53c416=base,irq */
-void sym53c416_setup(char *str, int *ints)
-{
-	int i;
-
-	if(host_index >= MAXHOSTS)
-	{
-		printk(KERN_WARNING "sym53c416: Too many hosts defined\n");
-		return;
-	}
-	if(ints[0] < 1 || ints[0] > 2)
-	{
-		printk(KERN_ERR "sym53c416: Wrong number of parameters:\n");
-		printk(KERN_ERR "sym53c416: usage: sym53c416=<base>[,<irq>]\n");
-		return;
-	}
-	for(i = 0; i < host_index && i >= 0; i++)
-	        if(hosts[i].base == ints[1])
-        		i = -2;
-	if(i >= 0)
-	{
-        	hosts[host_index].base = ints[1];
-        	hosts[host_index].irq = (ints[0] == 2)? ints[2] : 0;
-        	host_index++;
-	}
-}
-
-static int sym53c416_test(int base)
-{
-	outb(RESET_CHIP, base + COMMAND_REG);
-	outb(NOOP, base + COMMAND_REG);
-	if(inb(base + COMMAND_REG) != NOOP)
-		return 0;
-	if(!inb(base + TC_HIGH) || inb(base + TC_HIGH) == 0xFF)
-		return 0;
-	if((inb(base + PIO_INT_REG) & (FULL | EMPTY | CE | OUE | FIE | EIE)) != EMPTY)
-		return 0;
-	return 1;
-}
-
-
-static struct isapnp_device_id id_table[] = {
-	{	ISAPNP_ANY_ID, ISAPNP_ANY_ID,
-		ISAPNP_VENDOR('S','L','I'), ISAPNP_FUNCTION(0x4161), 0 },
-	{	ISAPNP_ANY_ID, ISAPNP_ANY_ID,
-		ISAPNP_VENDOR('S','L','I'), ISAPNP_FUNCTION(0x4163), 0 },
-	{	ISAPNP_DEVICE_SINGLE_END }
-};
-
-MODULE_DEVICE_TABLE(isapnp, id_table);
-
-static void sym53c416_probe(void)
-{
-	int *base = probeaddrs;
-	int ints[2];
-
-	ints[0] = 1;
-	for(; *base; base++) {
-		if (request_region(*base, IO_RANGE, ID)) {
-			if (sym53c416_test(*base)) {
-				ints[1] = *base;
-				sym53c416_setup(NULL, ints);
-			}
-			release_region(*base, IO_RANGE);
-		}
-	}
-}
-
-int sym53c416_detect(struct scsi_host_template *tpnt)
-{
-	unsigned long flags;
-	struct Scsi_Host * shpnt = NULL;
-	int i;
-	int count;
-	struct pnp_dev *idev = NULL;
-	
-#ifdef MODULE
-	int ints[3];
-
-	ints[0] = 2;
-	if(sym53c416_base[0])
-	{
-		ints[1] = sym53c416_base[0];
-		ints[2] = sym53c416_base[1];
-		sym53c416_setup(NULL, ints);
-	}
-	if(sym53c416_base_1[0])
-	{
-		ints[1] = sym53c416_base_1[0];
-		ints[2] = sym53c416_base_1[1];
-		sym53c416_setup(NULL, ints);
-	}
-	if(sym53c416_base_2[0])
-	{
-		ints[1] = sym53c416_base_2[0];
-		ints[2] = sym53c416_base_2[1];
-		sym53c416_setup(NULL, ints);
-	}
-	if(sym53c416_base_3[0])
-	{
-		ints[1] = sym53c416_base_3[0];
-		ints[2] = sym53c416_base_3[1];
-		sym53c416_setup(NULL, ints);
-	}
-#endif
-	printk(KERN_INFO "sym53c416.c: %s\n", VERSION_STRING);
-
-	for (i=0; id_table[i].vendor != 0; i++) {
-		while((idev=pnp_find_dev(NULL, id_table[i].vendor,
-					id_table[i].function, idev))!=NULL)
-		{
-			int i[3];
-
-			if(pnp_device_attach(idev)<0)
-			{
-				printk(KERN_WARNING "sym53c416: unable to attach PnP device.\n");
-				continue;
-			}
-			if(pnp_activate_dev(idev) < 0)
-			{
-				printk(KERN_WARNING "sym53c416: unable to activate PnP device.\n");
-				pnp_device_detach(idev);
-				continue;
-			
-			}
-
-			i[0] = 2;
-			i[1] = pnp_port_start(idev, 0);
- 			i[2] = pnp_irq(idev, 0);
-
-			printk(KERN_INFO "sym53c416: ISAPnP card found and configured at 0x%X, IRQ %d.\n",
-				i[1], i[2]);
- 			sym53c416_setup(NULL, i);
- 		}
-	}
-	sym53c416_probe();
-
-	/* Now we register and set up each host adapter found... */
-	for(count = 0, i = 0; i < host_index; i++) {
-		if (!request_region(hosts[i].base, IO_RANGE, ID))
-			continue;
-		if (!sym53c416_test(hosts[i].base)) {
-			printk(KERN_WARNING "No sym53c416 found at address 0x%03x\n", hosts[i].base);
-			goto fail_release_region;
-		}
-
-		/* We don't have an irq yet, so we should probe for one */
-		if (!hosts[i].irq)
-			hosts[i].irq = sym53c416_probeirq(hosts[i].base, hosts[i].scsi_id);
-		if (!hosts[i].irq)
-			goto fail_release_region;
-	
-		shpnt = scsi_register(tpnt, 0);
-		if (!shpnt)
-			goto fail_release_region;
-		/* Request for specified IRQ */
-		if (request_irq(hosts[i].irq, sym53c416_intr_handle, 0, ID, shpnt))
-			goto fail_free_host;
-
-		spin_lock_irqsave(&sym53c416_lock, flags);
-		shpnt->unique_id = hosts[i].base;
-		shpnt->io_port = hosts[i].base;
-		shpnt->n_io_port = IO_RANGE;
-		shpnt->irq = hosts[i].irq;
-		shpnt->this_id = hosts[i].scsi_id;
-		sym53c416_init(hosts[i].base, hosts[i].scsi_id);
-		count++;
-		spin_unlock_irqrestore(&sym53c416_lock, flags);
-		continue;
-
- fail_free_host:
-		scsi_unregister(shpnt);
- fail_release_region:
-		release_region(hosts[i].base, IO_RANGE);
-	}
-	return count;
-}
-
-const char *sym53c416_info(struct Scsi_Host *SChost)
-{
-	int i;
-	int base = SChost->io_port;
-	int irq = SChost->irq;
-	int scsi_id = 0;
-	int rev = inb(base + TC_HIGH);
-
-	for(i = 0; i < host_index; i++)
-		if(hosts[i].base == base)
-			scsi_id = hosts[i].scsi_id;
-	sprintf(info, "Symbios Logic 53c416 (rev. %d) at 0x%03x, irq %d, SCSI-ID %d, %s pio", rev, base, irq, scsi_id, (fastpio)? "fast" : "slow");
-	return info;
-}
-
-static int sym53c416_queuecommand_lck(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
-{
-	int base;
-	unsigned long flags = 0;
-	int i;
-
-	/* Store base register as we can have more than one controller in the system */
-	base = SCpnt->device->host->io_port;
-	current_command = SCpnt;                  /* set current command                */
-	current_command->scsi_done = done;        /* set ptr to done function           */
-	current_command->SCp.phase = command_ph;  /* currect phase is the command phase */
-	current_command->SCp.Status = 0;
-	current_command->SCp.Message = 0;
-
-	spin_lock_irqsave(&sym53c416_lock, flags);
-	outb(scmd_id(SCpnt), base + DEST_BUS_ID); /* Set scsi id target        */
-	outb(FLUSH_FIFO, base + COMMAND_REG);    /* Flush SCSI and PIO FIFO's */
-	/* Write SCSI command into the SCSI fifo */
-	for(i = 0; i < SCpnt->cmd_len; i++)
-		outb(SCpnt->cmnd[i], base + SCSI_FIFO);
-	/* Start selection sequence */
-	outb(SEL_WITHOUT_ATN_SEQ, base + COMMAND_REG);
-	/* Now an interrupt will be generated which we will catch in out interrupt routine */
-	spin_unlock_irqrestore(&sym53c416_lock, flags);
-	return 0;
-}
-
-DEF_SCSI_QCMD(sym53c416_queuecommand)
-
-static int sym53c416_host_reset(Scsi_Cmnd *SCpnt)
-{
-	int base;
-	int scsi_id = -1;	
-	int i;
-	unsigned long flags;
-
-	spin_lock_irqsave(&sym53c416_lock, flags);
-
-	/* printk("sym53c416_reset\n"); */
-	base = SCpnt->device->host->io_port;
-	/* search scsi_id - fixme, we shouldn't need to iterate for this! */
-	for(i = 0; i < host_index && scsi_id == -1; i++)
-		if(hosts[i].base == base)
-			scsi_id = hosts[i].scsi_id;
-	outb(RESET_CHIP, base + COMMAND_REG);
-	outb(NOOP | PIO_MODE, base + COMMAND_REG);
-	outb(RESET_SCSI_BUS, base + COMMAND_REG);
-	sym53c416_init(base, scsi_id);
-
-	spin_unlock_irqrestore(&sym53c416_lock, flags);
-	return SUCCESS;
-}
-
-static int sym53c416_release(struct Scsi_Host *shost)
-{
-	if (shost->irq)
-		free_irq(shost->irq, shost);
-	if (shost->io_port && shost->n_io_port)
-		release_region(shost->io_port, shost->n_io_port);
-	return 0;
-}
-
-static int sym53c416_bios_param(struct scsi_device *sdev,
-		struct block_device *dev,
-		sector_t capacity, int *ip)
-{
-	int size;
-
-	size = capacity;
-	ip[0] = 64;				/* heads                        */
-	ip[1] = 32;				/* sectors                      */
-	if((ip[2] = size >> 11) > 1024)		/* cylinders, test for big disk */
-	{
-		ip[0] = 255;			/* heads                        */
-		ip[1] = 63;			/* sectors                      */
-		ip[2] = size / (255 * 63);	/* cylinders                    */
-	}
-	return 0;
-}
-
-/* Loadable module support */
-#ifdef MODULE
-
-MODULE_AUTHOR("Lieven Willems");
-MODULE_LICENSE("GPL");
-
-module_param_array(sym53c416, uint, NULL, 0);
-module_param_array(sym53c416_1, uint, NULL, 0);
-module_param_array(sym53c416_2, uint, NULL, 0);
-module_param_array(sym53c416_3, uint, NULL, 0);
-
-#endif
-
-static struct scsi_host_template driver_template = {
-	.proc_name =		"sym53c416",
-	.name =			"Symbios Logic 53c416",
-	.detect =		sym53c416_detect,
-	.info =			sym53c416_info,	
-	.queuecommand =		sym53c416_queuecommand,
-	.eh_host_reset_handler =sym53c416_host_reset,
-	.release = 		sym53c416_release,
-	.bios_param =		sym53c416_bios_param,
-	.can_queue =		1,
-	.this_id =		SYM53C416_SCSI_ID,
-	.sg_tablesize =		32,
-	.unchecked_isa_dma =	1,
-	.use_clustering =	ENABLE_CLUSTERING,
-};
-#include "scsi_module.c"
diff --git a/drivers/scsi/sym53c416.h b/drivers/scsi/sym53c416.h
deleted file mode 100644
index 387de5d80a70..000000000000
--- a/drivers/scsi/sym53c416.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  sym53c416.h
- * 
- *  Copyright (C) 1998 Lieven Willems (lw_linux@hotmail.com)
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2, or (at your option) any
- *  later version.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- */
-
-#ifndef _SYM53C416_H
-#define _SYM53C416_H
-
-#include <linux/types.h>
-
-#define SYM53C416_SCSI_ID 7
-
-static int sym53c416_detect(struct scsi_host_template *);
-static const char *sym53c416_info(struct Scsi_Host *);
-static int sym53c416_release(struct Scsi_Host *);
-static int sym53c416_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
-static int sym53c416_host_reset(Scsi_Cmnd *);
-static int sym53c416_bios_param(struct scsi_device *, struct block_device *,
-		sector_t, int *);
-static void sym53c416_setup(char *str, int *ints);
-#endif